From a346c91c884142455e6debb086e751cc7eb435b3 Mon Sep 17 00:00:00 2001
From: TDE Weblate The compression value for PNG images:"
-" 1: low compression (large file size but short compression duration - "
-"default)"
-" 5: medium compression"
-" 9: high compression (small file size but long compression duration)"
-" Note: PNG is always a lossless image compression format."
-msgstr ""
-
-#: libs/dimg/loaders/tiffsettings.cpp:67
-msgid "Compress TIFF files"
+"_: NAME OF TRANSLATORS\n"
+"Your names"
msgstr ""
-#: libs/dimg/loaders/tiffsettings.cpp:69
+#: _translatorinfo:2
msgid ""
-" Toggle compression for TIFF images."
-" If you enable this option, you can reduce the final file size of the TIFF "
-"image. A lossless compression format (Deflate) is used to save the file."
-" "
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
msgstr ""
-#: libs/dimg/loaders/jp2ksettings.cpp:74
-msgid "Lossless JPEG 2000 files"
+#: digikam/album.cpp:327 digikam/albumfolderview.cpp:268
+#: digikam/albumfolderview.cpp:588 digikam/albumfolderview.cpp:1063
+#: digikam/albumfolderview.cpp:1162 digikam/albumfolderview.cpp:1195
+#: digikam/albumfolderview.cpp:1253 digikam/albumfolderview.cpp:1323
+#: digikam/albummanager.cpp:392 digikam/kipiinterface.cpp:522
+#: utilities/cameragui/albumselectdialog.cpp:112
+msgid "My Albums"
msgstr ""
-#: libs/dimg/loaders/jp2ksettings.cpp:76
-msgid ""
-" Toggle lossless compression for JPEG 2000 images."
-" If you enable this option, you will use a lossless method to compress JPEG "
-"2000 pictures."
-" "
+#: digikam/album.cpp:383 digikam/albummanager.cpp:395
+#: digikam/tagfolderview.cpp:190 digikam/tagfolderview.cpp:542
+#: digikam/tagfolderview.cpp:839 digikam/tagfolderview.cpp:919
+#: digikam/tagfolderview.cpp:947
+msgid "My Tags"
msgstr ""
-#: libs/dimg/loaders/jp2ksettings.cpp:82
-msgid "JPEG 2000 quality:"
+#: digikam/albumfiletip.cpp:318 libs/thumbbar/thumbbar.cpp:927
+msgid "unavailable"
msgstr ""
-#: libs/dimg/loaders/jp2ksettings.cpp:84
-msgid ""
-" The quality value for JPEG 2000 images:"
-" 1: low quality (high compression and small file size)"
-" 50: medium quality"
-" 75: good quality (default)"
-" 100: high quality (no compression and large file size)"
-" Note: JPEG 2000 is not a lossless image compression format when you use "
-"this setting."
+#: digikam/albumfiletip.cpp:350 libs/thumbbar/thumbbar.cpp:944
+msgid "File Properties"
msgstr ""
-#: libs/dimg/loaders/jpegsettings.cpp:82
-msgid "JPEG quality:"
+#: digikam/albumfiletip.cpp:354 libs/thumbbar/thumbbar.cpp:948
+msgid "Name:"
msgstr ""
-#: libs/dimg/loaders/jpegsettings.cpp:84
-msgid ""
-" The JPEG image quality:"
-" 1: low quality (high compression and small file size)"
-" 50: medium quality"
-" 75: good quality (default)"
-" 100: high quality (no compression and large file size)"
-" Note: JPEG always uses lossy compression."
+#: digikam/albumfiletip.cpp:362 libs/thumbbar/thumbbar.cpp:956
+msgid "Modified:"
msgstr ""
-#: libs/dimg/loaders/jpegsettings.cpp:93
-msgid ""
-" JPEG Chroma subsampling level \n"
-"(color is saved with less resolution than luminance):"
-" None=best: uses 4:4:4 ratio. Does not employ chroma subsampling at "
-"all. This preserves edges and contrasting colors, whilst adding no additional "
-"compression"
-" Medium: uses 4:2:2 ratio. Medium compression: reduces the color "
-"resolution by one-third with little to no visual difference"
-" High: use 4:1:1 ratio. High compression: suits images with soft edges "
-"but tends to alter colors"
-" Note: JPEG always uses lossy compression."
+#: digikam/albumfiletip.cpp:411 digikam/albumiconitem.cpp:322
+#: libs/imageproperties/cameraitempropertiestab.cpp:441
+#: libs/imageproperties/imagepropertiestab.cpp:500
+#: libs/thumbbar/thumbbar.cpp:1005 showfoto/showfoto.cpp:710
+#: utilities/imageeditor/editor/imagewindow.cpp:611
+msgid "%1x%2 (%3Mpx)"
msgstr ""
-#: libs/imageproperties/imagepropertiessidebardb.cpp:91
-msgid "Captions/Tags"
+#: digikam/albumfiletip.cpp:413 libs/thumbbar/thumbbar.cpp:1007
+msgid "Dimensions:"
msgstr ""
-#: libs/imageproperties/imagepropertiesmetadatatab.cpp:101
-msgid "EXIF"
+#: digikam/albumfiletip.cpp:433 libs/thumbbar/thumbbar.cpp:1026
+msgid "Photograph Properties"
msgstr ""
-#: libs/imageproperties/imagepropertiesmetadatatab.cpp:106
-msgid "Makernote"
+#: digikam/albumfiletip.cpp:440 libs/thumbbar/thumbbar.cpp:1033
+msgid "Make/Model:"
msgstr ""
-#: libs/imageproperties/imagepropertiesmetadatatab.cpp:111
-msgid "IPTC"
+#: digikam/albumfiletip.cpp:449 digikam/albumfiletip.cpp:452
+#: libs/dialogs/imagedialog.cpp:200 libs/thumbbar/thumbbar.cpp:1042
+#: libs/thumbbar/thumbbar.cpp:1045
+msgid "Created:"
msgstr ""
-#: libs/imageproperties/imagepropertiesmetadatatab.cpp:116
-msgid "GPS"
+#: digikam/albumfiletip.cpp:462
+#: libs/imageproperties/cameraitempropertiestab.cpp:532
+#: libs/imageproperties/imagepropertiestab.cpp:578
+#: libs/thumbbar/thumbbar.cpp:1055
+msgid "%1 (35mm: %2)"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:197
-msgid "File Properties"
+#: digikam/albumfiletip.cpp:465 libs/thumbbar/thumbbar.cpp:1058
+msgid "Aperture/Focal:"
msgstr ""
-#: libs/imageproperties/cameraitempropertiestab.cpp:183
-#: libs/imageproperties/imagepropertiestab.cpp:198
-msgid "File:"
+#: digikam/albumfiletip.cpp:471 libs/dialogs/imagedialog.cpp:195
+#: libs/imageproperties/cameraitempropertiestab.cpp:537
+#: libs/imageproperties/imagepropertiestab.cpp:583
+#: libs/thumbbar/thumbbar.cpp:1064 utilities/slideshow/slideshow.cpp:365
+msgid "%1 ISO"
msgstr ""
-#: libs/imageproperties/cameraitempropertiestab.cpp:184
-#: libs/imageproperties/imagepropertiestab.cpp:199
-msgid "Folder:"
+#: digikam/albumfiletip.cpp:473 libs/thumbbar/thumbbar.cpp:1066
+msgid "Exposure/Sensitivity:"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:200
-msgid "Modified:"
+#: digikam/albumfiletip.cpp:488 libs/thumbbar/thumbbar.cpp:1081
+msgid "Mode/Program:"
msgstr ""
-#: libs/imageproperties/cameraitempropertiestab.cpp:186
-#: libs/imageproperties/imagepropertiestab.cpp:201
-msgid "Size:"
+#: digikam/albumfiletip.cpp:495 libs/thumbbar/thumbbar.cpp:1088
+msgid "Flash:"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:202
-msgid "Owner:"
+#: digikam/albumfiletip.cpp:502 libs/thumbbar/thumbbar.cpp:1095
+msgid "White Balance:"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:203
-msgid "Permissions:"
+#: digikam/albumfiletip.cpp:516 utilities/lighttable/lighttablebar.cpp:842
+msgid "digiKam Properties"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:206
-msgid "Image Properties"
+#: digikam/albumfiletip.cpp:522 utilities/lighttable/lighttablebar.cpp:848
+msgid "Album:"
msgstr ""
-#: libs/imageproperties/cameraitempropertiestab.cpp:189
-#: libs/imageproperties/imagepropertiestab.cpp:207
-msgid "Type:"
+#: digikam/albumfiletip.cpp:529 libs/imageproperties/imagedescedittab.cpp:159
+#: utilities/lighttable/lighttablebar.cpp:856
+msgid "Caption:"
msgstr ""
-#: libs/imageproperties/cameraitempropertiestab.cpp:190
-#: libs/imageproperties/imagepropertiestab.cpp:208
-msgid "Dimensions:"
+#: digikam/albumfiletip.cpp:539 utilities/lighttable/lighttablebar.cpp:866
+msgid "Tags:"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:209
-msgid "Compression:"
+#: digikam/albumfiletip.cpp:546 libs/imageproperties/imagedescedittab.cpp:170
+#: utilities/lighttable/lighttablebar.cpp:873
+msgid "Rating:"
msgstr ""
-#: libs/imageproperties/imagepropertiestab.cpp:210
-msgid " You have edited the comment of the image. \n"
-" You have edited the comment of %n images. "
+#: digikam/albumiconview.cpp:1506
+msgid "Assign '%1' to &This Item"
msgstr ""
-#: libs/imageproperties/imagedescedittab.cpp:413
-#, c-format
-msgid ""
-"_n: You have edited the date of the image. \n"
-" You have edited the date of %n images. "
+#: digikam/albumiconview.cpp:1509
+msgid "Assign '%1' to &All Items"
msgstr ""
-#: libs/imageproperties/imagedescedittab.cpp:417
-#, c-format
-msgid ""
-"_n: You have edited the rating of the image. \n"
-" You have edited the rating of %n images. "
+#: digikam/albumiconview.cpp:1521 digikam/albumiconview.cpp:1532
+#: digikam/albumiconview.cpp:1598 digikam/albumiconview.cpp:1608
+#: digikam/albumiconview.cpp:2228 digikam/tagfilterview.cpp:638
+#: digikam/tagfolderview.cpp:960
+msgid "Assigning image tags. Please wait..."
msgstr ""
-#: libs/imageproperties/imagedescedittab.cpp:421
-#, c-format
-msgid ""
-"_n: You have edited the tags of the image. \n"
-" You have edited the tags of %n images. "
+#: digikam/albumiconview.cpp:1581
+msgid "Assign Tags to &Selected Items"
msgstr ""
-#: libs/imageproperties/imagedescedittab.cpp:424
-#: libs/imageproperties/imagedescedittab.cpp:443
-msgid "Do you want to apply your changes? You have edited the metadata of the image: You have edited the metadata of %n images: Select the histogram channel to display here:"
-" Luminosity: Display luminosity (perceived brightness) values."
-" Red: Display the red image channel."
-" Green: Display the green image channel."
-" Blue: Display the blue image channel."
-" Alpha: Display the alpha image channel. This channel corresponds to "
-"the transparency value and is supported by some image formats such as PNG or "
-"TIFF."
-" Colors: Display all color channel values at the same time."
+#: digikam/albumpropsedit.cpp:136 digikam/tageditdlg.cpp:118
+msgid "&Title:"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:147
-#: libs/imageproperties/imagepropertiescolorstab.cpp:190
-msgid ""
-" Select the histogram scale here."
-" If the image's maximal values are small, you can use the linear scale."
-" Logarithmic scale can be used when the maximal values are big; if it is "
-"used, all values (small and large) will be visible on the graph."
+#: digikam/albumpropsedit.cpp:148
+msgid "Co&llection:"
msgstr ""
-#: digikam/timelineview.cpp:156
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:145
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:149
-#: imageplugins/channelmixer/channelmixertool.cpp:142
-#: imageplugins/colorfx/colorfxtool.cpp:126
-#: imageplugins/coreplugin/autocorrectiontool.cpp:126
-#: imageplugins/coreplugin/bcgtool.cpp:125
-#: imageplugins/coreplugin/bwsepiatool.cpp:216
-#: imageplugins/coreplugin/hsl/hsltool.cpp:129
-#: imageplugins/coreplugin/iccprooftool.cpp:154
-#: imageplugins/coreplugin/redeyetool.cpp:126
-#: imageplugins/coreplugin/rgbtool.cpp:123
-#: imageplugins/whitebalance/whitebalancetool.cpp:145
-#: libs/imageproperties/imagepropertiescolorstab.cpp:197
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:198
-msgid " Linear"
+#: digikam/albumpropsedit.cpp:157
+msgid "Ca&ption:"
msgstr ""
-#: digikam/timelineview.cpp:164
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:153
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:157
-#: imageplugins/channelmixer/channelmixertool.cpp:150
-#: imageplugins/colorfx/colorfxtool.cpp:134
-#: imageplugins/coreplugin/autocorrectiontool.cpp:134
-#: imageplugins/coreplugin/bcgtool.cpp:133
-#: imageplugins/coreplugin/bwsepiatool.cpp:224
-#: imageplugins/coreplugin/hsl/hsltool.cpp:137
-#: imageplugins/coreplugin/iccprooftool.cpp:162
-#: imageplugins/coreplugin/redeyetool.cpp:134
-#: imageplugins/coreplugin/rgbtool.cpp:131
-#: imageplugins/whitebalance/whitebalancetool.cpp:153
-#: libs/imageproperties/imagepropertiescolorstab.cpp:205
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:206
-msgid " Logarithmic"
+#: digikam/albumpropsedit.cpp:168
+msgid "Album &date:"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:212
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:213
-msgid "Colors:"
+#: digikam/albumpropsedit.cpp:178
+msgid ""
+"_: Selects the date of the oldest image\n"
+"&Oldest"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:219
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:220
+#: digikam/albumpropsedit.cpp:181
msgid ""
-" Select the main color displayed with Colors Channel mode here:"
-" Red: Draw the red image channel in the foreground."
-" Green: Draw the green image channel in the foreground."
-" Blue: Draw the blue image channel in the foreground."
-" "
+"_: Calculates the average date\n"
+"&Average"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:229
+#: digikam/albumpropsedit.cpp:184
msgid ""
-" Select from which region the histogram will be computed here:"
-" Full Image: Compute histogram using the full image."
-" Selection: Compute histogram using the current image selection."
+"_: Selects the date of the newest image\n"
+"Newest"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:235
-msgid " Full Image"
+#: digikam/albumpropsedit.cpp:267
+msgid "Uncategorized Album"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:243
-msgid " Selection"
+#: digikam/albumpropsedit.cpp:370
+msgid "Could not calculate an average."
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:254
-msgid " This is the histogram drawing of the selected image channel"
+#: digikam/albumpropsedit.cpp:371
+msgid "Could Not Calculate Average"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:264
-msgid "Range:"
+#: digikam/albumsettings.cpp:166
+msgid "Family"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:268
-msgid " Select the minimal intensity value of the histogram selection here."
+#: digikam/albumsettings.cpp:167
+msgid "Travel"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:272
-msgid " Select the maximal intensity value of the histogram selection here."
+#: digikam/albumsettings.cpp:168
+msgid "Holidays"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:280
-msgid "Statistics"
+#: digikam/albumsettings.cpp:169
+msgid "Friends"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:281
-msgid ""
-" Here you can see the statistical results calculated from the selected "
-"histogram part. These values are available for all channels."
+#: digikam/albumsettings.cpp:170
+msgid "Nature"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:285
-#: libs/widgets/common/histogramwidget.cpp:951
-msgid "Pixels:"
+#: digikam/albumsettings.cpp:171
+msgid "Party"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:290
-#: libs/widgets/common/histogramwidget.cpp:959
-msgid "Count:"
+#: digikam/albumsettings.cpp:172
+msgid "Todo"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:295
-#: libs/widgets/common/histogramwidget.cpp:947
-msgid "Mean:"
+#: digikam/albumsettings.cpp:173 utilities/setup/setup.cpp:198
+msgid "Miscellaneous"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:300
-msgid "Std. deviation:"
+#: digikam/albumsettings.cpp:292 digikam/digikamapp.cpp:1955
+#: libs/themeengine/themeengine.cpp:99 libs/themeengine/themeengine.cpp:101
+#: libs/themeengine/themeengine.cpp:210 showfoto/showfoto.cpp:527
+#: utilities/imageeditor/editor/editorwindow.cpp:1885
+#: utilities/lighttable/lighttablewindow.cpp:1657
+msgid "Default"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:305
-#: libs/widgets/common/histogramwidget.cpp:963
-msgid "Median:"
+#: digikam/cameralist.cpp:227
+msgid ""
+"Failed to auto-detect camera; please make sure it is connected properly and "
+"is turned on. Would you like to try again?"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:310
-msgid "Percentile:"
+#: digikam/daboutdata.h:86
+#, c-format
+msgid "Using KExiv2 library version %1"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:315
-msgid "Color depth:"
+#: digikam/daboutdata.h:88
+#, c-format
+msgid "Using Exiv2 library version %1"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:320
-msgid "Alpha Channel:"
+#: digikam/daboutdata.h:90
+#, c-format
+msgid "Using KDcraw library version %1"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:337
-msgid "Histogram"
+#: digikam/daboutdata.h:93
+#, c-format
+msgid "Using Dcraw program version %1"
msgstr ""
-#: libs/imageproperties/imagepropertiescolorstab.cpp:348
-msgid "ICC profile"
+#: digikam/daboutdata.h:95
+#, c-format
+msgid "Using LibRaw version %1"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:110
-#: libs/imageproperties/imagepropertiescolorstab.cpp:752
-msgid "16 bits"
+#: digikam/daboutdata.h:98
+#, c-format
+msgid "Using PNG library version %1"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:106
-#: libs/imageproperties/imagepropertiescolorstab.cpp:752
-msgid "8 bits"
+#: digikam/daboutdata.h:105
+msgid "A Photo-Management Application for TDE"
msgstr ""
-#: libs/dialogs/deletedialog.cpp:115
-msgid ""
-" Using KDcraw library version %1"
-" Using Dcraw program version %2"
-" %3 models in the list"
+#: digikam/daboutdata.h:226
+msgid "German translations and beta tester"
msgstr ""
-#: libs/dialogs/rawcameradlg.cpp:112
-msgid ""
-" Using KDcraw library version %1"
-" Using LibRaw version %2"
-" %3 models in the list"
+#: digikam/daboutdata.h:231
+msgid "Spanish translations"
msgstr ""
-#: libs/dialogs/iccprofileinfodlg.cpp:39
-msgid "Color Profile Info"
+#: digikam/daboutdata.h:236
+msgid "Czech translations"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:322
-#: libs/dialogs/imagedialog.cpp:198
-msgid "Make:"
+#: digikam/daboutdata.h:241
+msgid "Hungarian translations"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:324
-#: libs/dialogs/imagedialog.cpp:199
-msgid "Model:"
+#: digikam/daboutdata.h:246
+msgid "Dutch translations"
msgstr ""
-#: digikam/albumfiletip.cpp:449 digikam/albumfiletip.cpp:452
-#: libs/dialogs/imagedialog.cpp:200 libs/thumbbar/thumbbar.cpp:1042
-#: libs/thumbbar/thumbbar.cpp:1045
-msgid "Created:"
+#: digikam/daboutdata.h:251
+msgid "Polish translations"
msgstr ""
-#: libs/dialogs/imagedialog.cpp:201
-msgid "Aperture:"
+#: digikam/daboutdata.h:256
+msgid "Beta tester"
msgstr ""
-#: libs/dialogs/imagedialog.cpp:202
-msgid "Focal:"
+#: digikam/daboutdata.h:261
+msgid "Plugin contributor and beta tester"
msgstr ""
-#: libs/dialogs/imagedialog.cpp:203
-msgid "Exposure:"
+#: digikam/daboutdata.h:266
+msgid "Feedback and patches. Handbook writer"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:161 libs/dialogs/imagedialog.cpp:204
-msgid "Sensitivity:"
+#: digikam/daboutdata.h:271
+msgid "digiKam website banner and application icons"
msgstr ""
-#: libs/dialogs/imagedialog.cpp:284 libs/dialogs/imagedialog.cpp:293
-msgid ""
-"\n"
-"%1|Camera RAW files"
+#: digikam/daboutdata.h:276
+msgid "Various usability fixes and general application polishing"
msgstr ""
-#: libs/dialogs/imagedialog.cpp:308
-msgid "Select an Image"
+#: digikam/daboutdata.h:281
+msgid "digiKam website, Feedback"
msgstr ""
-#: libs/dialogs/imagedialog.cpp:316
-msgid "Select Images"
+#: digikam/daboutdata.h:286
+msgid "Bug reports, feedback and icons"
msgstr ""
-#: digikam/digikamapp.cpp:1705
-#: libs/greycstoration/greycstorationwidget.cpp:138
-#: showfoto/setup/setup.cpp:94
-#: utilities/imageeditor/editor/editorwindow.cpp:644
-#: utilities/lighttable/lighttablewindow.cpp:1509
-msgid "General"
+#: digikam/datefolderview.cpp:194
+msgid "My Calendar"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:140
-msgid "Detail preservation:"
+#: digikam/digikamapp.cpp:127
+msgid "Initializing..."
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:144
-msgid ""
-" Preservation of details to set the sharpening level of the small features in "
-"the target image. Higher values leave details sharp."
+#: digikam/digikamapp.cpp:162 showfoto/showfoto.cpp:179
+msgid "Checking ICC repository"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:150
-msgid "Anisotropy:"
+#: digikam/digikamapp.cpp:170 showfoto/showfoto.cpp:187
+msgid "Checking dcraw version"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:154
-msgid ""
-" Anisotropic (directional) modifier of the details. Keep it small for "
-"Gaussian noise."
+#: digikam/digikamapp.cpp:176
+msgid "Scan Albums"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:159
-msgid "Smoothing:"
+#: digikam/digikamapp.cpp:182
+msgid "Reading database"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:163
+#: digikam/digikamapp.cpp:265
msgid ""
-" Total smoothing power: if the Detail Factor sets the relative smoothing and "
-"the Anisotropy Factor the direction, the Smoothing Factor sets the overall "
-"effect."
+" ICC profiles path seems to be invalid. If you want to set it "
+"now, select \"Yes\", otherwise select \"No\". In this case, \"Color "
+"Management\" feature will be disabled until you solve this issue This value controls the evenness of smoothing to the image. Do not use a "
-"high value here, or the target image will be completely blurred."
+#: digikam/digikamapp.cpp:344
+msgid "Opening Download Dialog"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:179
-msgid "Iterations:"
+#: digikam/digikamapp.cpp:363
+msgid "Initializing Main View"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:182
-msgid " Sets the number of times the filter is applied to the image."
+#: digikam/digikamapp.cpp:447
+msgid "Exit Preview"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:187
-msgid "Noise:"
+#: digikam/digikamapp.cpp:448
+msgid "Exit preview mode"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:191
-msgid " Sets the noise scale."
+#: digikam/digikamapp.cpp:452 digikam/digikamapp.cpp:453
+#: digikam/digikamapp.cpp:467 digikam/digikamapp.cpp:468
+#: utilities/imageeditor/editor/editorwindow.cpp:522
+#: utilities/imageeditor/editor/editorwindow.cpp:537
+#: utilities/lighttable/lighttablewindow.cpp:514
+#: utilities/lighttable/lighttablewindow.cpp:529
+msgid "Next Image"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:200
-#: utilities/setup/setupicc.cpp:296
-msgid "Advanced Settings"
+#: digikam/digikamapp.cpp:457 digikam/digikamapp.cpp:458
+#: digikam/digikamapp.cpp:462 digikam/digikamapp.cpp:463
+#: digikam/digikamapp.cpp:472 digikam/digikamapp.cpp:473
+#: utilities/imageeditor/editor/editorwindow.cpp:527
+#: utilities/imageeditor/editor/editorwindow.cpp:532
+#: utilities/imageeditor/editor/editorwindow.cpp:542
+#: utilities/lighttable/lighttablewindow.cpp:519
+#: utilities/lighttable/lighttablewindow.cpp:524
+#: utilities/lighttable/lighttablewindow.cpp:534
+msgid "Previous Image"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:202
-msgid "Angular step:"
+#: digikam/digikamapp.cpp:477 digikam/digikamapp.cpp:478
+msgid "First Image"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:206
-msgid ""
-" Set here the angular integration step (in degrees) analogous to anisotropy."
+#: digikam/digikamapp.cpp:482 digikam/digikamapp.cpp:483
+msgid "Last Image"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:211
-msgid "Integral step:"
+#: digikam/digikamapp.cpp:487 digikam/digikamapp.cpp:488
+msgid "Copy Album Items Selection"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:215
-msgid " Set here the spatial integral step."
+#: digikam/digikamapp.cpp:492 digikam/digikamapp.cpp:493
+msgid "Paste Album Items Selection"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:219
-msgid "Gaussian:"
+#: digikam/digikamapp.cpp:502
+msgid "&Camera"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:223
-msgid " Set here the precision of the Gaussian function."
+#: digikam/digikamapp.cpp:510 utilities/imageeditor/editor/editorwindow.cpp:481
+#: utilities/lighttable/lighttablewindow.cpp:440
+msgid "&Themes"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:227
-msgid "Tile size:"
+#: digikam/digikamapp.cpp:519
+msgid "&Back"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:230
-msgid " Sets the tile size."
+#: digikam/digikamapp.cpp:534 digikam/imagepreviewview.cpp:366
+msgid "Forward"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:234
-msgid "Tile border:"
+#: digikam/digikamapp.cpp:549
+msgid "&New..."
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:237
-msgid " Sets the size of each tile border."
+#: digikam/digikamapp.cpp:556
+msgid "Creates a new empty Album in the database."
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:241
-msgid "Interpolation:"
+#: digikam/digikamapp.cpp:558
+msgid "&Sort Albums"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:243
-msgid "Nearest Neighbor"
+#: digikam/digikamapp.cpp:569
+msgid "By Folder"
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:91
-#: libs/greycstoration/greycstorationwidget.cpp:244
-msgid "Linear"
+#: digikam/digikamapp.cpp:570
+msgid "By Collection"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:245
-msgid "Runge-Kutta"
+#: digikam/digikamapp.cpp:571 digikam/digikamapp.cpp:769
+msgid "By Date"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:246
-msgid " Select the right interpolation method for the desired image quality."
+#: digikam/digikamapp.cpp:574
+msgid "Include Album Sub-Tree"
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:251
-msgid "Fast approximation"
+#: digikam/digikamapp.cpp:580
+msgid ""
+"Activate this option to recursively show all sub-albums below the current "
+"album."
msgstr ""
-#: libs/greycstoration/greycstorationwidget.cpp:252
-msgid " Enable fast approximation when rendering images."
+#: digikam/digikamapp.cpp:586
+msgid "Include Tag Sub-Tree"
msgstr ""
-#: digikam/albumfiletip.cpp:318 libs/thumbbar/thumbbar.cpp:927
-msgid "unavailable"
+#: digikam/digikamapp.cpp:592
+msgid ""
+"Activate this option to show all images marked by the given tag and its all "
+"its sub-tags."
msgstr ""
-#: digikam/albumfiletip.cpp:350 libs/thumbbar/thumbbar.cpp:944
-msgid "File Properties"
+#: digikam/digikamapp.cpp:598 digikam/digikamapp.cpp:721
+#: digikam/searchfolderview.cpp:325 digikam/tagfilterview.cpp:1248
+#: digikam/tagfolderview.cpp:750 digikam/timelinefolderview.cpp:178
+#: digikam/timelinefolderview.cpp:275
+#: libs/imageproperties/imagedescedittab.cpp:1155 showfoto/showfoto.cpp:1109
+#: utilities/cameragui/cameraiconview.cpp:592
+#: utilities/cameragui/cameraui.cpp:1473
+msgid "Delete"
msgstr ""
-#: digikam/albumfiletip.cpp:354 libs/thumbbar/thumbbar.cpp:948
-msgid "Name:"
+#: digikam/digikamapp.cpp:606
+msgid "Add Images..."
msgstr ""
-#: digikam/albumfiletip.cpp:362 libs/thumbbar/thumbbar.cpp:956
-msgid "Modified:"
+#: digikam/digikamapp.cpp:613
+msgid "Adds new items to the current Album."
msgstr ""
-#: digikam/albumfiletip.cpp:367
-#: imageplugins/inserttext/fontchooserwidget.cpp:177
-#: libs/thumbbar/thumbbar.cpp:961
-msgid "Size:"
+#: digikam/digikamapp.cpp:615
+msgid "Add Folders..."
msgstr ""
-#: digikam/albumfiletip.cpp:404 imageplugins/blurfx/blurfxtool.cpp:80
-#: imageplugins/border/bordertool.cpp:85
-#: imageplugins/colorfx/colorfxtool.cpp:161
-#: imageplugins/distortionfx/distortionfxtool.cpp:95
-#: imageplugins/texture/texturetool.cpp:78 libs/thumbbar/thumbbar.cpp:998
-msgid "Type:"
+#: digikam/digikamapp.cpp:623
+msgid "Properties..."
msgstr ""
-#: digikam/albumfiletip.cpp:413 libs/thumbbar/thumbbar.cpp:1007
-msgid "Dimensions:"
+#: digikam/digikamapp.cpp:630
+msgid "Edit Album Properties and Collection information."
msgstr ""
-#: digikam/albumfiletip.cpp:433 libs/thumbbar/thumbbar.cpp:1026
-msgid "Photograph Properties"
+#: digikam/digikamapp.cpp:632
+msgid "Refresh"
msgstr ""
-#: digikam/albumfiletip.cpp:440 libs/thumbbar/thumbbar.cpp:1033
-msgid "Make/Model:"
+#: digikam/digikamapp.cpp:639
+msgid "Refresh all album contents"
msgstr ""
-#: digikam/albumfiletip.cpp:465 libs/thumbbar/thumbbar.cpp:1058
-msgid "Aperture/Focal:"
+#: digikam/digikamapp.cpp:641
+msgid "Synchronize Images with Database"
msgstr ""
-#: digikam/albumfiletip.cpp:473 libs/thumbbar/thumbbar.cpp:1066
-msgid "Exposure/Sensitivity:"
+#: digikam/digikamapp.cpp:648
+msgid ""
+"Updates all image metadata of the current album with the contents of the "
+"digiKam database (image metadata will be over-written with data from the "
+"database)."
msgstr ""
-#: digikam/albumfiletip.cpp:488 libs/thumbbar/thumbbar.cpp:1081
-msgid "Mode/Program:"
+#: digikam/digikamapp.cpp:652
+msgid "Open in File Manager"
msgstr ""
-#: digikam/albumfiletip.cpp:495 libs/thumbbar/thumbbar.cpp:1088
-msgid "Flash:"
+#: digikam/digikamapp.cpp:662
+msgid "New &Tag..."
msgstr ""
-#: digikam/albumfiletip.cpp:502 libs/thumbbar/thumbbar.cpp:1095
-msgid "White Balance:"
+#: digikam/digikamapp.cpp:666 digikam/tagfilterview.cpp:886
+#: digikam/tagfolderview.cpp:548 libs/imageproperties/imagedescedittab.cpp:832
+msgid "Edit Tag Properties..."
msgstr ""
-#: libs/widgets/metadata/exifwidget.cpp:102
-msgid "Standard EXIF Tags"
+#: digikam/digikamapp.cpp:670 digikam/tagfilterview.cpp:889
+#: digikam/tagfilterview.cpp:1247 digikam/tagfolderview.cpp:551
+#: digikam/tagfolderview.cpp:749 libs/imageproperties/imagedescedittab.cpp:835
+#: libs/imageproperties/imagedescedittab.cpp:1154
+msgid "Delete Tag"
msgstr ""
-#: libs/widgets/metadata/exifwidget.cpp:173
-#: libs/widgets/metadata/gpswidget.cpp:313
-#: libs/widgets/metadata/iptcwidget.cpp:154
-#: libs/widgets/metadata/makernotewidget.cpp:198
-msgid "No description available"
+#: digikam/digikamapp.cpp:691
+msgid "Open the selected item in the image editor."
msgstr ""
-#: libs/widgets/metadata/exifwidget.cpp:180
-#: libs/widgets/metadata/gpswidget.cpp:335
-#: libs/widgets/metadata/makernotewidget.cpp:205
-msgid "EXIF File to Save"
+#: digikam/digikamapp.cpp:693
+msgid "Place onto Light Table"
msgstr ""
-#: libs/widgets/metadata/exifwidget.cpp:181
-#: libs/widgets/metadata/gpswidget.cpp:336
-#: libs/widgets/metadata/makernotewidget.cpp:206
-msgid "EXIF binary Files (*.exif)"
+#: digikam/digikamapp.cpp:700
+msgid "Place the selected items on the light table thumbbar."
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:113
-msgid "Switch the tags view to a simple human-readable list"
+#: digikam/digikamapp.cpp:709
+msgid "Add selected items to the light table thumbbar."
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:114
-msgid "Simple list"
+#: digikam/digikamapp.cpp:718
+msgid "Change the filename of the currently selected item."
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:120
-msgid "Switch the tags view to a full list"
+#: digikam/digikamapp.cpp:730
+msgid "Delete permanently"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:121
-msgid "Full list"
+#: digikam/digikamapp.cpp:740
+msgid "Delete permanently without confirmation"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:130
-msgid "Save metadata to a binary file"
+#: digikam/digikamapp.cpp:748
+msgid "Move to trash without confirmation"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:131
-msgid "Save metadata"
+#: digikam/digikamapp.cpp:756
+msgid "&Sort Images"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:136
-msgid "Print metadata to printer"
+#: digikam/digikamapp.cpp:767
+msgid "By Name"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:137
-msgid "Print metadata"
+#: digikam/digikamapp.cpp:768
+msgid "By Path"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:142
-#: libs/widgets/metadata/metadatawidget.cpp:143
-msgid "Copy metadata to clipboard"
+#: digikam/digikamapp.cpp:770
+msgid "By File Size"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:274
-msgid "File name: %1 (%2)"
+#: digikam/digikamapp.cpp:771
+msgid "By Rating"
msgstr ""
-#: libs/widgets/metadata/metadatawidget.cpp:303
-msgid " File name: %1 (%2)"
+#: digikam/digikamapp.cpp:781
+msgid "Adjust Exif orientation tag"
msgstr ""
-#: libs/widgets/metadata/makernotewidget.cpp:127
-msgid "MakerNote EXIF Tags"
+#: digikam/digikamapp.cpp:786
+msgid "Normal"
msgstr ""
-#: libs/widgets/metadata/iptcwidget.cpp:83
-msgid "IPTC Records"
+#: digikam/digikamapp.cpp:792
+msgid "Flipped Horizontally"
msgstr ""
-#: libs/widgets/metadata/iptcwidget.cpp:161
-msgid "IPTC File to Save"
+#: digikam/digikamapp.cpp:798
+msgid "Rotated Upside Down"
msgstr ""
-#: libs/widgets/metadata/iptcwidget.cpp:162
-msgid "IPTC binary Files (*.iptc)"
+#: digikam/digikamapp.cpp:804
+msgid "Flipped Vertically"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:50
-msgid "Interoperability"
+#: digikam/digikamapp.cpp:810
+msgid "Rotated Right / Horiz. Flipped"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:51
-msgid "Image Information"
+#: digikam/digikamapp.cpp:816
+msgid "Rotated Right"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:52
-#: showfoto/setup/setuptooltip.cpp:127 utilities/setup/setuptooltip.cpp:138
-msgid "Photograph Information"
+#: digikam/digikamapp.cpp:822
+msgid "Rotated Right / Vert. Flipped"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:53
-msgid "Global Positioning System"
+#: digikam/digikamapp.cpp:828
+msgid "Rotated Left"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:54
-msgid "Embedded Thumbnail"
+#: digikam/digikamapp.cpp:879 utilities/imageeditor/editor/editorwindow.cpp:335
+msgid "Select All"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:57
-msgid "IIM Envelope"
+#: digikam/digikamapp.cpp:887 utilities/imageeditor/editor/editorwindow.cpp:343
+msgid "Select None"
msgstr ""
-#: libs/widgets/metadata/mdkeylistviewitem.cpp:58
-msgid "IIM Application 2"
+#: digikam/digikamapp.cpp:895 digikam/tagfilterview.cpp:914
+#: libs/imageproperties/imagedescedittab.cpp:860
+msgid "Invert Selection"
msgstr ""
-#: libs/widgets/metadata/metadatalistview.cpp:125
-msgid "Title: %1 Value: %2 Description: %3"
+#: digikam/digikamapp.cpp:913 libs/widgets/common/statuszoombar.cpp:130
+#: utilities/imageeditor/editor/editorwindow.cpp:547
+msgid "Zoom In"
msgstr ""
-#: libs/widgets/metadata/gpswidget.cpp:120
-msgid "More Info..."
+#: digikam/digikamapp.cpp:921 libs/widgets/common/statuszoombar.cpp:113
+#: utilities/imageeditor/editor/editorwindow.cpp:552
+msgid "Zoom Out"
msgstr ""
-#: libs/widgets/metadata/gpswidget.cpp:220
-msgid "Global Positioning System Information"
+#: digikam/digikamapp.cpp:929 utilities/imageeditor/editor/editorwindow.cpp:359
+#: utilities/lighttable/lighttablewindow.cpp:410
+#, c-format
+msgid "Zoom to 100%"
msgstr ""
-#: libs/widgets/common/curveswidget.cpp:342
-#: libs/widgets/common/histogramwidget.cpp:435
-#: libs/widgets/iccprofiles/cietonguewidget.cpp:749
-msgid "Loading image..."
+#: digikam/digikamapp.cpp:937 utilities/imageeditor/editor/editorwindow.cpp:365
+#: utilities/lighttable/lighttablepreview.cpp:380
+#: utilities/lighttable/lighttablewindow.cpp:415
+msgid "Fit to &Window"
msgstr ""
-#: libs/widgets/iccprofiles/cietonguewidget.cpp:765
-msgid "No profile available..."
+#: digikam/digikamapp.cpp:946 utilities/imageeditor/editor/editorwindow.cpp:404
+#: utilities/lighttable/lighttablewindow.cpp:420
+msgid "Full Screen"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:129
-msgid "Name"
+#: digikam/digikamapp.cpp:953
+msgid "Switch the window to full screen mode"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:130
-msgid "The ICC profile product name"
+#: digikam/digikamapp.cpp:955 utilities/imageeditor/editor/editorwindow.cpp:410
+#: utilities/lighttable/lighttablewindow.cpp:426
+msgid "Slideshow"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:131
-msgid "Description"
+#: digikam/digikamapp.cpp:960
+msgid "All"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:132
-msgid "The ICC profile product description"
+#: digikam/digikamapp.cpp:965
+msgid "Selection"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:134
-msgid "Additional ICC profile information"
+#: digikam/digikamapp.cpp:972
+msgid "With All Sub-Albums"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:135
-msgid "Manufacturer"
+#: digikam/digikamapp.cpp:984 utilities/imageeditor/editor/editorwindow.cpp:504
+#: utilities/lighttable/lighttablewindow.cpp:462
+msgid "Supported RAW Cameras"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:136
-msgid "Raw information about the ICC profile manufacturer"
+#: digikam/digikamapp.cpp:992
+msgid "Kipi Plugins Handbook"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:137
-#: utilities/setup/setupcamera.cpp:88
-msgid "Model"
+#: digikam/digikamapp.cpp:1005
+#: utilities/imageeditor/editor/editorwindow.cpp:492
+#: utilities/lighttable/lighttablewindow.cpp:450
+msgid "Donate..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:138
-msgid "Raw information about the ICC profile model"
+#: digikam/digikamapp.cpp:1013
+#: utilities/imageeditor/editor/editorwindow.cpp:498
+#: utilities/lighttable/lighttablewindow.cpp:456
+msgid "Contribute..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:139
-msgid "Copyright"
+#: digikam/digikamapp.cpp:1023 utilities/imageeditor/editor/imagewindow.cpp:314
+#: utilities/lighttable/lighttablewindow.cpp:479
+msgid "Assign Rating \"No Stars\""
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:140
-msgid "Raw information about the ICC profile copyright"
+#: digikam/digikamapp.cpp:1026 utilities/imageeditor/editor/imagewindow.cpp:317
+#: utilities/lighttable/lighttablewindow.cpp:482
+msgid "Assign Rating \"One Star\""
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:141
-msgid "Profile ID"
+#: digikam/digikamapp.cpp:1029 utilities/imageeditor/editor/imagewindow.cpp:320
+#: utilities/lighttable/lighttablewindow.cpp:485
+msgid "Assign Rating \"Two Stars\""
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:142
-msgid "The ICC profile ID number"
+#: digikam/digikamapp.cpp:1032 utilities/imageeditor/editor/imagewindow.cpp:323
+#: utilities/lighttable/lighttablewindow.cpp:488
+msgid "Assign Rating \"Three Stars\""
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:143
-msgid "Color Space"
+#: digikam/digikamapp.cpp:1035 utilities/imageeditor/editor/imagewindow.cpp:326
+#: utilities/lighttable/lighttablewindow.cpp:491
+msgid "Assign Rating \"Four Stars\""
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:144
-msgid "The color space used by the ICC profile"
+#: digikam/digikamapp.cpp:1038 utilities/imageeditor/editor/imagewindow.cpp:329
+#: utilities/lighttable/lighttablewindow.cpp:494
+msgid "Assign Rating \"Five Stars\""
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:145
-msgid "Connection Space"
+#: digikam/digikamapp.cpp:1046 libs/widgets/common/searchtextbar.h:81
+msgid "Search..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:146
-msgid "The connection space used by the ICC profile"
+#: digikam/digikamapp.cpp:1051
+msgid "Advanced Search..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:147
-msgid "Device Class"
+#: digikam/digikamapp.cpp:1054 utilities/lighttable/lighttablewindow.cpp:95
+#: utilities/lighttable/lighttablewindow.cpp:1242 utilities/setup/setup.cpp:166
+msgid "Light Table"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:148
-msgid "The ICC profile device class"
+#: digikam/digikamapp.cpp:1058
+msgid "Scan for New Images"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:149
-msgid "Rendering Intent"
+#: digikam/digikamapp.cpp:1062
+msgid "Rebuild All Thumbnails..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:150
-msgid "The ICC profile rendering intent"
+#: digikam/digikamapp.cpp:1066
+msgid "Update Metadata Database..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:151
-msgid "Profile Version"
+#: digikam/digikamapp.cpp:1081
+msgid "Loading cameras"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:152
-msgid "The ICC version used to record the profile"
+#: digikam/digikamapp.cpp:1306
+msgid "No item selected"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:153
-msgid "CMM Flags"
+#: digikam/digikamapp.cpp:1322
+msgid " (%1 of %2)"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:154
-msgid "The ICC profile color management flags"
+#: digikam/digikamapp.cpp:1329
+msgid "%1/%2 items selected"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:166
-msgid ""
-" This area contains a CIE or chromaticity diagram. A CIE diagram is a "
-"representation of all the colors that a person with normal vision can see. This "
-"is represented by the colored sail-shaped area. In addition you will see a "
-"triangle that is superimposed on the diagram outlined in white. This triangle "
-"represents the outer boundaries of the color space of the device that is "
-"characterized by the inspected profile. This is called the device gamut."
-" In addition there are black dots and yellow lines on the diagram. Each black "
-"dot represents one of the measurement points that were used to create this "
-"profile. The yellow line represents the amount that each point is corrected by "
-"the profile, and the direction of this correction."
+#: digikam/digikamapp.cpp:1482
+#, c-format
+msgid "Browse %1"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:201
-msgid "ICC Color Profile Information"
+#: digikam/digikamapp.cpp:1495
+#, c-format
+msgid "Images found in %1"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:289
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:322
-msgid "Lab"
+#: digikam/digikamapp.cpp:1556
+msgid "No media devices found"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:292
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:325
-msgid "Luv"
+#: digikam/digikamapp.cpp:1705 libs/greycstoration/greycstorationwidget.cpp:138
+#: showfoto/setup/setup.cpp:94
+#: utilities/imageeditor/editor/editorwindow.cpp:644
+#: utilities/lighttable/lighttablewindow.cpp:1505
+msgid "General"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:295
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:328
-msgid "RGB"
+#: digikam/digikamapp.cpp:1804
+msgid "Loading Kipi Plugins"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:298
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:331
-msgid "GRAY"
+#: digikam/digikamapp.cpp:1923
+msgid "Browse Media"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:301
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:334
-msgid "HSV"
+#: digikam/digikamapp.cpp:1927
+msgid "Add Camera..."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:304
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:337
-msgid "HLS"
+#: digikam/digikamapp.cpp:1936 showfoto/showfoto.cpp:195
+msgid "Loading themes"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:307
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:340
-msgid "CMYK"
+#: digikam/digikamapp.cpp:1976
+msgid ""
+"Rebuilding all image thumbnails can take some time.\n"
+"Do you want to continue?"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:310
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:343
-msgid "CMY"
+#: digikam/digikamapp.cpp:1997
+msgid ""
+"Updating the metadata database can take some time. \n"
+"Do you want to continue?"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:355
-msgid "Input device"
+#: digikam/digikamapp.cpp:2043
+#, c-format
+msgid "Size: %1"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:358
-msgid "Display device"
+#: digikam/digikamapp.cpp:2049
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:344
+#: utilities/lighttable/lighttablewindow.cpp:1548
+#: utilities/lighttable/lighttablewindow.cpp:1571
+msgid "zoom: %1%"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:361
-msgid "Output device"
+#: digikam/digikamapp.cpp:2077
+msgid "Select folder to parse"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:364
-msgid "Color space"
+#: digikam/digikamfirstrun.cpp:77
+msgid "Album Library Path"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:367
-msgid "Link device"
+#: digikam/digikamfirstrun.cpp:89
+msgid ""
+"_: This is a path name so you should include the slash in the translation\n"
+"/Pictures"
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:370
-msgid "Abstract"
+#: digikam/digikamfirstrun.cpp:108
+msgid ""
+"You must select a folder for digiKam to use as the Album Library folder."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:373
-msgid "Named color"
+#: digikam/digikamfirstrun.cpp:120
+msgid "digiKam cannot use your home folder as the Album Library folder."
msgstr ""
-#: libs/widgets/iccprofiles/iccprofilewidget.cpp:385
-msgid "Perceptual"
+#: digikam/digikamfirstrun.cpp:130
+msgid ""
+" %1 %1 digiKam will store the photo albums which you create in a common "
+"Albums Library Folder. Below, please select which folder you would "
+"like digiKam to use as the common Albums Library Folder. Do not use "
+"a mount path hosted by a remote computer. Here you can see the original clip image which will be used for the preview "
-"computation."
-" Click and drag the mouse cursor in the image to change the clip focus."
+#: digikam/kdateedit.cpp:347
+msgid "yesterday"
msgstr ""
-#: libs/widgets/imageplugins/imagepanelwidget.cpp:119
-msgid ""
-" If you enable this option, you will separate the preview area horizontally, "
-"displaying the original and target image at the same time. The target is "
-"duplicated from the original below the red dashed line."
+#: digikam/kdatepickerpopup.cpp:76
+msgid "&Today"
msgstr ""
-#: libs/widgets/imageplugins/imagepanelwidget.cpp:130
-msgid ""
-" If you enable this option, you will separate the preview area vertically, "
-"displaying the original and target image at the same time. The target is "
-"duplicated from the original to the right of the red dashed line."
+#: digikam/kdatepickerpopup.cpp:77
+msgid "Y&esterday"
msgstr ""
-#: libs/widgets/imageplugins/imagepanelwidget.cpp:145
-msgid ""
-" If you enable this option, you will separate the preview area horizontally, "
-"displaying the original and target image at the same time. The original is "
-"above the red dashed line, the target below it."
+#: digikam/kdatepickerpopup.cpp:78
+msgid "Last &Monday"
msgstr ""
-#: libs/widgets/imageplugins/imagepanelwidget.cpp:156
-msgid ""
-" If you enable this option, you will separate the preview area vertically, "
-"displaying the original and target image at the same time. The original is to "
-"the left of the red dashed line, the target to the right of it."
+#: digikam/kdatepickerpopup.cpp:79
+msgid "Last &Friday"
msgstr ""
-#: libs/widgets/imageplugins/imagepanelwidget.cpp:168
-msgid " If you enable this option, the preview area will not be separated."
+#: digikam/kdatepickerpopup.cpp:80
+msgid "Last &Week"
msgstr ""
-#: libs/widgets/imageplugins/imagepanelwidget.cpp:330
-msgid " If you enable this option, you will see the original image."
+#: digikam/kdatepickerpopup.cpp:88
+msgid "No Date"
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:114
-msgid ""
-" If you enable this option, the preview area will split vertically. A "
-"contiguous area of the image will be shown, with one half from the original "
-"image, the other half from the target image."
+#: digikam/kipiinterface.cpp:294 digikam/kipiinterface.cpp:310
+#, c-format
+msgid "Tag: %1"
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:126
-msgid ""
-" If you enable this option, the preview area will split horizontally. A "
-"contiguous area of the image will be shown, with one half from the original "
-"image, the other half from the target image."
+#: digikam/kipiinterface.cpp:661
+msgid "Target URL %1 is not valid."
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:138
-msgid ""
-" If you enable this option, the preview area will split vertically. The same "
-"part of the original and the target image will be shown side by side."
+#: digikam/kipiinterface.cpp:669
+msgid "Target album is not in the album library."
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:149
-msgid ""
-" If you enable this option, the preview area will split horizontally. The "
-"same part of the original and the target image will be shown side by side."
+#: digikam/main.cpp:62
+msgid "Automatically detect and open camera"
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:160
-msgid " If you enable this option, you will see the target image."
+#: digikam/main.cpp:63
+msgid "Open camera dialog at If you enable this option, you will see the original image when the mouse is "
-"over image area, else the target image."
+#: digikam/main.cpp:74 digikam/welcomepageview.cpp:62
+msgid "digiKam"
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:183
-msgid ""
-" Set this option to display black overlaid on the preview. This will help you "
-"to avoid under-exposing the image."
+#: digikam/mediaplayerview.cpp:87
+msgid "No media player available..."
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:191
-msgid ""
-" Set this option on display white overlaid on the preview. This will help you "
-"to avoid over-exposing the image."
+#: digikam/mimefilter.cpp:56
+msgid "All Files"
msgstr ""
-#: libs/widgets/imageplugins/imagewidget.cpp:317
-msgid "(%1,%2) RGBA:%3,%4,%5,%6"
+#: digikam/mimefilter.cpp:57 utilities/setup/setupmime.cpp:87
+msgid "Image Files"
msgstr ""
-#: digikam/firstrun.cpp:91
-msgid "Albums Library Folder"
+#: digikam/mimefilter.cpp:58
+msgid "No RAW Files"
msgstr ""
-#: digikam/firstrun.cpp:93
-msgid ""
-" digiKam will store the photo albums which you create in a common "
-"Albums Library Folder. Below, please select which folder you would like "
-"digiKam to use as the common Albums Library Folder. Do not use a mount path hosted by a remote computer. There is an album in the database which does not appear to be on "
+"disk. This album should be removed from the database, however you may lose "
+"information because all images associated with this album will be removed "
+"from the database as well. digiKam cannot continue without removing the "
+"items from the database because all views depend on the information in the "
+"database. Do you want them to be removed from the database?\n"
+" There are %n albums in the database which do not appear to be on disk. "
+"These albums should be removed from the database, however you may lose "
+"information because all images associated with these albums will be removed "
+"from the database as well. digiKam cannot continue without removing the "
+"items from the database because all views depend on the information in the "
+"database. Do you want them to be removed from the database?"
msgstr ""
-#: digikam/daboutdata.h:156
-msgid "Developer (2002-2005)"
+#: digikam/scanlib.cpp:173
+msgid "Albums are Missing"
msgstr ""
-#: digikam/daboutdata.h:161 digikam/daboutdata.h:166
-msgid "Developer (2004-2005)"
+#: digikam/scanlib.cpp:200
+msgid "Scanning items, please wait..."
msgstr ""
-#: digikam/daboutdata.h:176 digikam/daboutdata.h:181
-msgid "Bug reports and patches"
+#: digikam/scanlib.cpp:245
+msgid "Updating items, please wait..."
msgstr ""
-#: digikam/daboutdata.h:196
-msgid "Webmaster"
+#: digikam/scanlib.cpp:504
+#, c-format
+msgid ""
+"_n: There is an item in the database which does not appear to be on disk "
+"or is located in the root album of the path. This file should be removed "
+"from the database, however you may lose information. digiKam cannot "
+"continue without removing the item from the database because all views "
+"depend on the information in the database. Do you want it to be removed from "
+"the database?\n"
+" There are %n items in the database which do not appear to be on disk or "
+"are located in the root album of the path. These files should be removed "
+"from the database, however you may lose information. digiKam cannot "
+"continue without removing these items from the database because all views "
+"depend on the information in the database. Do you want them to be removed "
+"from the database?"
msgstr ""
-#: digikam/daboutdata.h:211
-msgid "Danish translations"
+#: digikam/scanlib.cpp:514
+msgid "Files are Missing"
msgstr ""
-#: digikam/daboutdata.h:216
-msgid "Italian translations"
+#: digikam/searchadvanceddialog.cpp:94
+msgid "Advanced Search"
msgstr ""
-#: digikam/daboutdata.h:221
-msgid "German translations"
+#: digikam/searchadvanceddialog.cpp:113
+msgid ""
+" Here you can review the images found using the current search settings."
msgstr ""
-#: digikam/daboutdata.h:226
-msgid "German translations and beta tester"
+#: digikam/searchadvanceddialog.cpp:122
+msgid "Search Rules"
msgstr ""
-#: digikam/daboutdata.h:231
-msgid "Spanish translations"
+#: digikam/searchadvanceddialog.cpp:123
+msgid ""
+" Here you can review the search rules used to filter image-searching in "
+"album library."
msgstr ""
-#: digikam/daboutdata.h:236
-msgid "Czech translations"
+#: digikam/searchadvanceddialog.cpp:133
+msgid "Add/Delete Option"
msgstr ""
-#: digikam/daboutdata.h:241
-msgid "Hungarian translations"
+#: digikam/searchadvanceddialog.cpp:134
+msgid " You can edit the search rules by adding/removing criteria."
msgstr ""
-#: digikam/daboutdata.h:246
-msgid "Dutch translations"
+#: digikam/searchadvanceddialog.cpp:141 digikam/searchwidgets.cpp:138
+#: digikam/searchwidgets.cpp:261 digikam/searchwidgets.cpp:483
+#: digikam/searchwidgets.cpp:593
+msgid "As well as"
msgstr ""
-#: digikam/daboutdata.h:251
-msgid "Polish translations"
+#: digikam/searchadvanceddialog.cpp:142 digikam/searchwidgets.cpp:138
+#: digikam/searchwidgets.cpp:256 digikam/searchwidgets.cpp:483
+#: digikam/searchwidgets.cpp:593
+msgid "Or"
msgstr ""
-#: digikam/daboutdata.h:256
-msgid "Beta tester"
+#: digikam/searchadvanceddialog.cpp:145
+msgid "&Add"
msgstr ""
-#: digikam/daboutdata.h:261
-msgid "Plugin contributor and beta tester"
+#: digikam/searchadvanceddialog.cpp:146
+msgid "&Del"
msgstr ""
-#: digikam/daboutdata.h:266
-msgid "Feedback and patches. Handbook writer"
+#: digikam/searchadvanceddialog.cpp:159
+msgid "Group/Ungroup Options"
msgstr ""
-#: digikam/daboutdata.h:271
-msgid "digiKam website banner and application icons"
+#: digikam/searchadvanceddialog.cpp:160
+msgid ""
+" You can group or ungroup any search criteria from the Search Rule set."
msgstr ""
-#: digikam/daboutdata.h:276
-msgid "Various usability fixes and general application polishing"
+#: digikam/searchadvanceddialog.cpp:165
+msgid "&Group"
msgstr ""
-#: digikam/daboutdata.h:281
-msgid "digiKam website, Feedback"
+#: digikam/searchadvanceddialog.cpp:166
+msgid "&Ungroup"
msgstr ""
-#: digikam/daboutdata.h:286
-msgid "Bug reports, feedback and icons"
+#: digikam/searchadvanceddialog.cpp:180
+msgid "&Save search as: "
msgstr ""
-#: digikam/scanlib.cpp:77
+#: digikam/searchadvanceddialog.cpp:182
msgid ""
-"This shows the progress of the scan. During the scan, all files on disk are "
-"registered in a database. This is required for sorting by exif-date, and also "
-"speeds up the overall performance of digiKam."
+" Enter the name used to save the current search in \"My Searches\" view"
msgstr ""
-#: digikam/scanlib.cpp:99
-msgid "Finding non-existent Albums"
+#: digikam/searchadvanceddialog.cpp:202 digikam/searchfolderview.cpp:84
+#: digikam/searchquickdialog.cpp:95 digikam/searchquickdialog.cpp:196
+msgid "Last Search"
msgstr ""
-#: digikam/scanlib.cpp:107
-msgid "Finding items not in database"
+#: digikam/searchfolderview.cpp:108 digikam/searchfolderview.cpp:401
+#: digikam/searchfolderview.cpp:426
+msgid "My Searches"
msgstr ""
-#: digikam/scanlib.cpp:115
-msgid "Updating items without a date"
+#: digikam/searchfolderview.cpp:238 digikam/timelineview.cpp:570
+msgid ""
+"Search name already exists.\n"
+"Please enter a new name:"
msgstr ""
-#: digikam/scanlib.cpp:162
-#, c-format
-msgid ""
-"_n: "
-" There is an album in the database which does not appear to be on disk. This "
-"album should be removed from the database, however you may lose information "
-"because all images associated with this album will be removed from the database "
-"as well."
-" digiKam cannot continue without removing the items from the database because "
-"all views depend on the information in the database. Do you want them to be "
-"removed from the database?\n"
-" There are %n albums in the database which do not appear to be on disk. These "
-"albums should be removed from the database, however you may lose information "
-"because all images associated with these albums will be removed from the "
-"database as well."
-" digiKam cannot continue without removing the items from the database because "
-"all views depend on the information in the database. Do you want them to be "
-"removed from the database?"
+#: digikam/searchfolderview.cpp:242 digikam/searchfolderview.cpp:245
+#: digikam/timelineview.cpp:574 digikam/timelineview.cpp:576
+msgid "Name exists"
msgstr ""
-#: digikam/scanlib.cpp:173
-msgid "Albums are Missing"
+#: digikam/searchfolderview.cpp:320
+msgid "Are you sure you want to delete the selected search \"%1\"?"
msgstr ""
-#: digikam/scanlib.cpp:200
-msgid "Scanning items, please wait..."
+#: digikam/searchfolderview.cpp:324
+msgid "Delete Search?"
msgstr ""
-#: digikam/scanlib.cpp:245
-msgid "Updating items, please wait..."
+#: digikam/searchfolderview.cpp:402
+msgid "New Simple Search..."
msgstr ""
-#: digikam/scanlib.cpp:504
-#, c-format
-msgid ""
-"_n: "
-" There is an item in the database which does not appear to be on disk or is "
-"located in the root album of the path. This file should be removed from the "
-"database, however you may lose information."
-" digiKam cannot continue without removing the item from the database because "
-"all views depend on the information in the database. Do you want it to be "
-"removed from the database?\n"
-" There are %n items in the database which do not appear to be on disk or are "
-"located in the root album of the path. These files should be removed from the "
-"database, however you may lose information."
-" digiKam cannot continue without removing these items from the database "
-"because all views depend on the information in the database. Do you want them "
-"to be removed from the database?"
+#: digikam/searchfolderview.cpp:403
+msgid "New Advanced Search..."
msgstr ""
-#: digikam/scanlib.cpp:514
-msgid "Files are Missing"
+#: digikam/searchfolderview.cpp:427
+msgid "Edit Search..."
msgstr ""
-#: digikam/digikamfirstrun.cpp:77
-msgid "Album Library Path"
+#: digikam/searchfolderview.cpp:430
+msgid "Edit as Advanced Search..."
msgstr ""
-#: digikam/digikamfirstrun.cpp:89
-msgid ""
-"_: This is a path name so you should include the slash in the translation\n"
-"/Pictures"
+#: digikam/searchfolderview.cpp:433
+msgid "Delete Search"
msgstr ""
-#: digikam/digikamfirstrun.cpp:108
-msgid ""
-"You must select a folder for digiKam to use as the Album Library folder."
+#: digikam/searchquickdialog.cpp:75
+msgid "Quick Search"
msgstr ""
-#: digikam/digikamfirstrun.cpp:120
-msgid "digiKam cannot use your home folder as the Album Library folder."
+#: digikam/searchquickdialog.cpp:84
+msgid "Search:"
msgstr ""
-#: digikam/digikamfirstrun.cpp:130
-msgid ""
-" %1 Enter your search criteria to find items in the album library"
msgstr ""
-#: digikam/digikamfirstrun.cpp:145
+#: digikam/searchquickdialog.cpp:90
msgid ""
-" %1 Here you can see the items found in album library, using the current "
+"search criteria"
msgstr ""
-#: digikam/digikamfirstrun.cpp:148
-msgid "Create Folder Failed"
+#: digikam/searchquickdialog.cpp:93
+msgid "Save search as:"
msgstr ""
-#: digikam/digikamfirstrun.cpp:157
+#: digikam/searchquickdialog.cpp:96
msgid ""
-"No write access for this path.\n"
-"Warning: the comment and tag features will not work."
+" Enter the name of the current search to save in the \"My Searches\" view"
msgstr ""
-#: digikam/digikamfirstrun.cpp:177
-msgid ""
-"Cannot restart digiKam automatically.\n"
-"Please restart digiKam manually."
+#: digikam/searchwidgets.cpp:74
+msgid "Album Name"
msgstr ""
-#: digikam/album.cpp:327 digikam/albumfolderview.cpp:268
-#: digikam/albumfolderview.cpp:588 digikam/albumfolderview.cpp:1063
-#: digikam/albumfolderview.cpp:1162 digikam/albumfolderview.cpp:1195
-#: digikam/albumfolderview.cpp:1253 digikam/albumfolderview.cpp:1323
-#: digikam/albummanager.cpp:392 digikam/kipiinterface.cpp:522
-#: utilities/cameragui/albumselectdialog.cpp:112
-msgid "My Albums"
+#: digikam/searchwidgets.cpp:75
+msgid "Album Caption"
msgstr ""
-#: digikam/albumfolderview.cpp:585
-msgid "Batch Process"
+#: digikam/searchwidgets.cpp:76
+msgid "Album Collection"
msgstr ""
-#: digikam/albumfolderview.cpp:589
-msgid "New Album..."
+#: digikam/searchwidgets.cpp:78
+msgid "Tag Name"
msgstr ""
-#: digikam/albumfolderview.cpp:602
-msgid "Album Properties..."
+#: digikam/searchwidgets.cpp:79
+msgid "Image Name"
msgstr ""
-#: digikam/albumfolderview.cpp:603
-msgid "Reset Album Icon"
+#: digikam/searchwidgets.cpp:80
+msgid "Image Date"
msgstr ""
-#: digikam/albumfolderview.cpp:667
-msgid "Move Album to Trash"
+#: digikam/searchwidgets.cpp:81
+msgid "Image Caption"
msgstr ""
-#: digikam/albumfolderview.cpp:672
-msgid "Delete Album"
+#: digikam/searchwidgets.cpp:82
+msgid "Keyword"
msgstr ""
-#: digikam/albumfolderview.cpp:736
-msgid ""
-"The album library has not been set correctly.\n"
-"Select \"Configure Digikam\" from the Settings menu and choose a folder to use "
-"for the album library."
+#: digikam/searchwidgets.cpp:83
+msgid "Rating"
msgstr ""
-#: digikam/albumfolderview.cpp:873 digikam/timelineview.cpp:626
-#: digikam/timelineview.cpp:630
-msgid "Rename Album (%1)"
+#: digikam/searchwidgets.cpp:94 digikam/searchwidgets.cpp:100
+#: digikam/searchwidgets.cpp:104
+msgid "Contains"
msgstr ""
-#: digikam/albumfolderview.cpp:874 digikam/albumfolderview.cpp:878
-#: digikam/timelineview.cpp:627 digikam/timelineview.cpp:631
-msgid "Enter new album name:"
+#: digikam/searchwidgets.cpp:95 digikam/searchwidgets.cpp:101
+#: digikam/searchwidgets.cpp:105
+msgid "Does Not Contain"
msgstr ""
-#: digikam/albumfolderview.cpp:877 digikam/albumiconview.cpp:968
-#: digikam/albumiconview.cpp:972
-msgid "Rename Item (%1)"
+#: digikam/searchwidgets.cpp:96 digikam/searchwidgets.cpp:98
+#: digikam/searchwidgets.cpp:102 digikam/searchwidgets.cpp:108
+#: digikam/searchwidgets.cpp:111
+msgid "Equals"
msgstr ""
-#: digikam/albumfolderview.cpp:1163 digikam/albumfolderview.cpp:1199
-#: digikam/albumiconview.cpp:673
-msgid "Set as Album Thumbnail"
+#: digikam/searchwidgets.cpp:97 digikam/searchwidgets.cpp:99
+#: digikam/searchwidgets.cpp:103
+msgid "Does Not Equal"
msgstr ""
-#: digikam/albumfolderview.cpp:1197 digikam/albumfolderview.cpp:1325
-#: digikam/albumiconview.cpp:1406 digikam/albumiconview.cpp:1444
-msgid "&Copy Here"
+#: digikam/searchwidgets.cpp:106
+msgid "After"
msgstr ""
-#: digikam/albumfolderview.cpp:1254 digikam/albumiconview.cpp:1636
-msgid "Download from camera"
+#: digikam/searchwidgets.cpp:107
+msgid "Before"
msgstr ""
-#: digikam/albumfolderview.cpp:1255 digikam/albumiconview.cpp:1637
-msgid "Download && Delete from camera"
+#: digikam/searchwidgets.cpp:109
+msgid "At least"
msgstr ""
-#: digikam/albumfolderview.cpp:1363
-msgid ""
-"The album library has not been set correctly.\n"
-"Select \"Configure digiKam\" from the Settings menu and choose a folder to use "
-"for the album library."
+#: digikam/searchwidgets.cpp:110
+msgid "At most"
msgstr ""
-#: digikam/albumfolderview.cpp:1386
-msgid "Select folders to import"
+#: digikam/tageditdlg.cpp:98
+msgid "New Tag"
msgstr ""
-#: digikam/albumfolderview.cpp:1462
-msgid "Uncategorized Albums"
+#: digikam/tageditdlg.cpp:99
+msgid "Edit Tag"
msgstr ""
-#: digikam/albumiconitem.cpp:299
-#, c-format
-msgid "created : %1"
+#: digikam/tageditdlg.cpp:120
+msgid "Enter tag name here..."
msgstr ""
-#: digikam/albumiconitem.cpp:311
-#, c-format
-msgid "modified : %1"
+#: digikam/tageditdlg.cpp:125
+msgid ""
+" To create new tags, you can use the following rules:"
+"p> digiKam is a photo management program for the Trinity Desktop Environment. It is "
-"designed to import, organize, and export your digital photographs on your "
-"computer. You are currently in the Album view mode of digiKam. The Albums are the real "
-"containers where your files are stored, they are identical with the folders on "
-"disk. Some of the new features in this release of digiKam include (compared to "
-"digiKam %4): We hope that you will enjoy digiKam. Thank you, The digiKam Team Select the histogram time unit here. You can change the graph decade to "
+"zoom in or zoom out over time."
msgstr ""
-#: digikam/welcomepageview.cpp:151
-msgid "New options to easy navigate between albums, tags and collections"
+#: digikam/timelineview.cpp:149
+msgid ""
+" Select the histogram scale here. If the date count's maximal values are "
+"small, you can use the linear scale. Logarithmic scale can be used when "
+"the maximal values are big; if it is used, all values (small and large) will "
+"be visible on the graph."
msgstr ""
-#: digikam/welcomepageview.cpp:152
-msgid "New options to recursively show the contents of sub-folders"
+#: digikam/timelineview.cpp:156 imageplugins/adjustcurves/adjustcurves.cpp:154
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:145
+#: imageplugins/adjustlevels/adjustlevels.cpp:156
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:149
+#: imageplugins/channelmixer/channelmixer.cpp:148
+#: imageplugins/channelmixer/channelmixertool.cpp:142
+#: imageplugins/colorfx/colorfxtool.cpp:126
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:132
+#: imageplugins/coreplugin/autocorrectiontool.cpp:126
+#: imageplugins/coreplugin/bcgtool.cpp:125
+#: imageplugins/coreplugin/bwsepiatool.cpp:216
+#: imageplugins/coreplugin/hsl/hsltool.cpp:129
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:112
+#: imageplugins/coreplugin/iccprooftool.cpp:154
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:119
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:112
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:214
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:141
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:111
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:110
+#: imageplugins/coreplugin/redeyetool.cpp:126
+#: imageplugins/coreplugin/rgbtool.cpp:123
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:149
+#: imageplugins/whitebalance/whitebalancetool.cpp:145
+#: libs/imageproperties/imagepropertiescolorstab.cpp:197
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:198
+msgid " Linear"
msgstr ""
-#: digikam/welcomepageview.cpp:153
-msgid "New text filter to search contents on folder views"
+#: digikam/timelineview.cpp:164 imageplugins/adjustcurves/adjustcurves.cpp:162
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:153
+#: imageplugins/adjustlevels/adjustlevels.cpp:164
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:157
+#: imageplugins/channelmixer/channelmixer.cpp:156
+#: imageplugins/channelmixer/channelmixertool.cpp:150
+#: imageplugins/colorfx/colorfxtool.cpp:134
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:140
+#: imageplugins/coreplugin/autocorrectiontool.cpp:134
+#: imageplugins/coreplugin/bcgtool.cpp:133
+#: imageplugins/coreplugin/bwsepiatool.cpp:224
+#: imageplugins/coreplugin/hsl/hsltool.cpp:137
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:120
+#: imageplugins/coreplugin/iccprooftool.cpp:162
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:127
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:120
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:222
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:149
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:119
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:118
+#: imageplugins/coreplugin/redeyetool.cpp:134
+#: imageplugins/coreplugin/rgbtool.cpp:131
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:157
+#: imageplugins/whitebalance/whitebalancetool.cpp:153
+#: libs/imageproperties/imagepropertiescolorstab.cpp:205
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:206
+msgid " Logarithmic"
msgstr ""
-#: digikam/welcomepageview.cpp:154
-msgid "New options to count of items on all folder views"
+#: digikam/timelineview.cpp:198
+msgid "Clear current selection"
msgstr ""
-#: digikam/welcomepageview.cpp:155
+#: digikam/timelineview.cpp:199
msgid ""
-"New tool to perform dates search around whole albums collection: Time-Line"
+" If you press this button, current dates selection from time-line will be "
+"clear."
msgstr ""
-#: digikam/welcomepageview.cpp:156
+#: digikam/timelineview.cpp:203
msgid ""
-"New tool to import RAW files in editor with customized decoding settings"
+" Enter the name of the current dates search to save in the \"My Date "
+"Searches\" view"
msgstr ""
-#: digikam/welcomepageview.cpp:160
-msgid ""
-" If you press this button, current dates selection from time-line will be "
+"saved to a new search virtual Album using name set on the left side."
msgstr ""
-#: digikam/searchfolderview.cpp:108 digikam/searchfolderview.cpp:401
-#: digikam/searchfolderview.cpp:426
-msgid "My Searches"
+#: digikam/timelinewidget.cpp:282
+msgid "Week #%1 - %2 %3"
msgstr ""
-#: digikam/searchfolderview.cpp:238 digikam/timelineview.cpp:570
+#: digikam/welcomepageview.cpp:112
msgid ""
-"Search name already exists.\n"
-"Please enter a new name:"
-msgstr ""
-
-#: digikam/searchfolderview.cpp:242 digikam/searchfolderview.cpp:245
-#: digikam/timelineview.cpp:574 digikam/timelineview.cpp:576
-msgid "Name exists"
+"_: %1: digiKam version; %2: help:// URL; %3: homepage URL; %4: prior digiKam "
+"version; %5: prior KDE version; %6: generated list of new features; %7: "
+"First-time user text (only shown on first start); %8: generated list of "
+"important changes; --- end of comment ---\n"
+" digiKam is a photo "
+"management program for the Trinity Desktop Environment. It is designed to "
+"import, organize, and export your digital photographs on your computer."
+"p> You are currently in the Album view mode of digiKam. The Albums are the "
+"real containers where your files are stored, they are identical with the "
+"folders on disk. Some of the features of digiKam include We hope you will enjoy digiKam. Thank you, The digiKam Team This is the image's curve-adjustments preview. You can pick a spot on the "
+"image to see the corresponding level in the histogram."
msgstr ""
-#: digikam/albummanager.cpp:936
-msgid "Album name cannot be empty."
+#: imageplugins/adjustcurves/adjustcurves.cpp:129
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:120
+#: imageplugins/adjustlevels/adjustlevels.cpp:128
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:121
+#: imageplugins/channelmixer/channelmixer.cpp:126
+#: imageplugins/channelmixer/channelmixertool.cpp:120
+#: imageplugins/colorfx/colorfxtool.cpp:103
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:109
+#: imageplugins/coreplugin/autocorrectiontool.cpp:103
+#: imageplugins/coreplugin/bcgtool.cpp:102
+#: imageplugins/coreplugin/bwsepiatool.cpp:193
+#: imageplugins/coreplugin/hsl/hsltool.cpp:106
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:89
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:96
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:89
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:191
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:88
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:87
+#: imageplugins/coreplugin/redeyetool.cpp:103
+#: imageplugins/coreplugin/rgbtool.cpp:100
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:125
+#: imageplugins/whitebalance/whitebalancetool.cpp:121
+#: libs/imageproperties/imagepropertiescolorstab.cpp:167
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:173
+msgid "Channel:"
msgstr ""
-#: digikam/albummanager.cpp:942
-msgid "Album name cannot contain '/'."
+#: imageplugins/adjustcurves/adjustcurves.cpp:132
+#: imageplugins/adjustcurves/adjustcurves.cpp:137
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:123
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:128
+#: imageplugins/adjustlevels/adjustlevels.cpp:131
+#: imageplugins/adjustlevels/adjustlevels.cpp:136
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:124
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:129
+#: imageplugins/colorfx/colorfxtool.cpp:106
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:112
+#: imageplugins/coreplugin/autocorrectiontool.cpp:106
+#: imageplugins/coreplugin/bcgtool.cpp:105
+#: imageplugins/coreplugin/bwsepiatool.cpp:196
+#: imageplugins/coreplugin/hsl/hsltool.cpp:109
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:92
+#: imageplugins/coreplugin/iccprooftool.cpp:133
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:99
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:92
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:194
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:120
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:91
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:90
+#: imageplugins/coreplugin/redeyetool.cpp:106
+#: imageplugins/coreplugin/rgbtool.cpp:103
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:128
+#: imageplugins/whitebalance/whitebalancetool.cpp:124
+#: libs/imageproperties/imagepropertiescolorstab.cpp:170
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:176
+msgid "Luminosity"
msgstr ""
-#: digikam/albummanager.cpp:952
-msgid "An existing album has the same name."
-msgstr ""
-
-#: digikam/albummanager.cpp:967
-msgid "Another file or folder with same name exists"
-msgstr ""
-
-#: digikam/albummanager.cpp:969
-msgid "Access denied to path"
+#: imageplugins/adjustcurves/adjustcurves.cpp:133
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:124
+#: imageplugins/adjustlevels/adjustlevels.cpp:132
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:125
+#: imageplugins/channelmixer/channelmixer.cpp:129
+#: imageplugins/channelmixer/channelmixer.cpp:132
+#: imageplugins/channelmixer/channelmixertool.cpp:123
+#: imageplugins/channelmixer/channelmixertool.cpp:126
+#: imageplugins/colorfx/colorfxtool.cpp:107
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:113
+#: imageplugins/coreplugin/autocorrectiontool.cpp:107
+#: imageplugins/coreplugin/bcgtool.cpp:106
+#: imageplugins/coreplugin/bwsepiatool.cpp:197
+#: imageplugins/coreplugin/hsl/hsltool.cpp:110
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:93
+#: imageplugins/coreplugin/iccprooftool.cpp:134
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:100
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:93
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:195
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:121
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:92
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:91
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:155
+#: imageplugins/coreplugin/redeyetool.cpp:107
+#: imageplugins/coreplugin/rgbtool.cpp:104
+#: imageplugins/coreplugin/rgbtool.cpp:168
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:129
+#: imageplugins/whitebalance/whitebalancetool.cpp:125
+#: libs/imageproperties/imagepropertiescolorstab.cpp:171
+#: libs/imageproperties/imagepropertiescolorstab.cpp:215
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:177
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:216
+msgid "Red"
msgstr ""
-#: digikam/albummanager.cpp:971
-msgid "Disk is full"
+#: imageplugins/adjustcurves/adjustcurves.cpp:134
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:125
+#: imageplugins/adjustlevels/adjustlevels.cpp:133
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:126
+#: imageplugins/channelmixer/channelmixer.cpp:130
+#: imageplugins/channelmixer/channelmixertool.cpp:124
+#: imageplugins/colorfx/colorfxtool.cpp:108
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:114
+#: imageplugins/coreplugin/autocorrectiontool.cpp:108
+#: imageplugins/coreplugin/bcgtool.cpp:107
+#: imageplugins/coreplugin/bwsepiatool.cpp:198
+#: imageplugins/coreplugin/hsl/hsltool.cpp:111
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:94
+#: imageplugins/coreplugin/iccprooftool.cpp:135
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:101
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:94
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:196
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:122
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:93
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:92
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:172
+#: imageplugins/coreplugin/redeyetool.cpp:108
+#: imageplugins/coreplugin/rgbtool.cpp:105
+#: imageplugins/coreplugin/rgbtool.cpp:187
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:130
+#: imageplugins/whitebalance/whitebalancetool.cpp:126
+#: libs/imageproperties/imagepropertiescolorstab.cpp:172
+#: libs/imageproperties/imagepropertiescolorstab.cpp:216
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:178
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:217
+msgid "Green"
msgstr ""
-#: digikam/albummanager.cpp:973
-msgid "Unknown error"
+#: imageplugins/adjustcurves/adjustcurves.cpp:135
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:126
+#: imageplugins/adjustlevels/adjustlevels.cpp:134
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:127
+#: imageplugins/channelmixer/channelmixer.cpp:131
+#: imageplugins/channelmixer/channelmixertool.cpp:125
+#: imageplugins/colorfx/colorfxtool.cpp:109
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:115
+#: imageplugins/coreplugin/autocorrectiontool.cpp:109
+#: imageplugins/coreplugin/bcgtool.cpp:108
+#: imageplugins/coreplugin/bwsepiatool.cpp:199
+#: imageplugins/coreplugin/hsl/hsltool.cpp:112
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:95
+#: imageplugins/coreplugin/iccprooftool.cpp:136
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:102
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:95
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:197
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:123
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:94
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:93
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:189
+#: imageplugins/coreplugin/redeyetool.cpp:109
+#: imageplugins/coreplugin/rgbtool.cpp:106
+#: imageplugins/coreplugin/rgbtool.cpp:206
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:131
+#: imageplugins/whitebalance/whitebalancetool.cpp:127
+#: libs/imageproperties/imagepropertiescolorstab.cpp:173
+#: libs/imageproperties/imagepropertiescolorstab.cpp:217
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:179
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:218
+msgid "Blue"
msgstr ""
-#: digikam/albummanager.cpp:986
-msgid "Failed to add album to database"
+#: imageplugins/adjustcurves/adjustcurves.cpp:136
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:127
+#: imageplugins/adjustlevels/adjustlevels.cpp:135
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:128
+#: libs/imageproperties/imagepropertiescolorstab.cpp:174
+msgid "Alpha"
msgstr ""
-#: digikam/albummanager.cpp:1009 digikam/albummanager.cpp:1090
-#: digikam/albummanager.cpp:1182 digikam/albummanager.cpp:1215
-#: digikam/albummanager.cpp:1255
-msgid "No such album"
+#: imageplugins/adjustcurves/adjustcurves.cpp:138
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:129
+msgid ""
+" Select the histogram channel to display here: Luminosity: "
+"display the image's luminosity values. Red: display the red image-"
+"channel values. Green: display the green image-channel values."
+" Blue: display the blue image-channel values. Alpha: "
+"display the alpha image-channel values. This channel corresponds to the "
+"transparency value and is supported by some image formats, such as PNG or "
+"TIF."
msgstr ""
-#: digikam/albummanager.cpp:1015
-msgid "Cannot rename root album"
+#: imageplugins/adjustcurves/adjustcurves.cpp:148
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:139
+#: imageplugins/channelmixer/channelmixer.cpp:142
+#: imageplugins/channelmixer/channelmixertool.cpp:136
+#: imageplugins/colorfx/colorfxtool.cpp:120
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:126
+#: imageplugins/coreplugin/autocorrectiontool.cpp:120
+#: imageplugins/coreplugin/bcgtool.cpp:119
+#: imageplugins/coreplugin/bwsepiatool.cpp:210
+#: imageplugins/coreplugin/hsl/hsltool.cpp:123
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:106
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:113
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:106
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:208
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:104
+#: imageplugins/coreplugin/rgbtool.cpp:117
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:142
+#: imageplugins/whitebalance/whitebalancetool.cpp:138
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:192
+msgid ""
+" Select the histogram scale here. If the image's maximal counts are "
+"small, you can use the linear scale. Logarithmic scale can be used when "
+"the maximal counts are big; if it is used, all values (small and large) will "
+"be visible on the graph."
msgstr ""
-#: digikam/albummanager.cpp:1021
-msgid "Album name cannot contain '/'"
+#: imageplugins/adjustcurves/adjustcurves.cpp:188
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:177
+msgid ""
+" Here you can see the target preview image histogram drawing of the "
+"selected image channel. This one is re-computed at any curves settings "
+"changes."
msgstr ""
-#: digikam/albummanager.cpp:1031
+#: imageplugins/adjustcurves/adjustcurves.cpp:201
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:190
msgid ""
-"Another album with same name exists\n"
-"Please choose another name"
+" This is the curve drawing of the selected channel from original image"
msgstr ""
-#: digikam/albummanager.cpp:1047
-msgid "Failed to rename Album"
+#: imageplugins/adjustcurves/adjustcurves.cpp:230
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:217
+msgid "Curve free mode"
msgstr ""
-#: digikam/albummanager.cpp:1096
-msgid "Cannot edit root album"
+#: imageplugins/adjustcurves/adjustcurves.cpp:231
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:218
+msgid " With this button, you can draw your curve free-hand with the mouse."
msgstr ""
-#: digikam/albummanager.cpp:1113
-msgid "No parent found for tag"
+#: imageplugins/adjustcurves/adjustcurves.cpp:239
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:226
+msgid "Curve smooth mode"
msgstr ""
-#: digikam/albummanager.cpp:1120
-msgid "Tag name cannot be empty"
+#: imageplugins/adjustcurves/adjustcurves.cpp:240
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:227
+msgid ""
+" With this button, you constrains the curve type to a smooth line with "
+"tension."
msgstr ""
-#: digikam/albummanager.cpp:1126 digikam/albummanager.cpp:1227
-msgid "Tag name cannot contain '/'"
+#: imageplugins/adjustcurves/adjustcurves.cpp:255
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:242
+#: imageplugins/adjustlevels/adjustlevels.cpp:264
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:261
+msgid "All channels shadow tone color picker"
msgstr ""
-#: digikam/albummanager.cpp:1136 digikam/tageditdlg.cpp:348
-msgid "Tag name already exists"
+#: imageplugins/adjustcurves/adjustcurves.cpp:256
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:243
+msgid ""
+" With this button, you can pick the color from original image used to set "
+"Shadow Tone smooth curves point on Red, Green, Blue, and Luminosity "
+"channels."
msgstr ""
-#: digikam/albummanager.cpp:1145
-msgid "Failed to add tag to database"
+#: imageplugins/adjustcurves/adjustcurves.cpp:265
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:252
+#: imageplugins/adjustlevels/adjustlevels.cpp:274
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:271
+msgid "All channels middle tone color picker"
msgstr ""
-#: digikam/albummanager.cpp:1188
-msgid "Cannot delete Root Tag"
+#: imageplugins/adjustcurves/adjustcurves.cpp:266
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:253
+msgid ""
+" With this button, you can pick the color from original image used to set "
+"Middle Tone smooth curves point on Red, Green, Blue, and Luminosity "
+"channels."
msgstr ""
-#: digikam/albummanager.cpp:1221 digikam/albummanager.cpp:1285
-msgid "Cannot edit root tag"
+#: imageplugins/adjustcurves/adjustcurves.cpp:275
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:262
+#: imageplugins/adjustlevels/adjustlevels.cpp:284
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:281
+msgid "All channels highlight tone color picker"
msgstr ""
-#: digikam/albummanager.cpp:1237
+#: imageplugins/adjustcurves/adjustcurves.cpp:276
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:263
msgid ""
-"Another tag with same name exists\n"
-"Please choose another name"
+" With this button, you can pick the color from original image used to set "
+"Highlight Tone smooth curves point on Red, Green, Blue, and "
+"Luminosity channels."
msgstr ""
-#: digikam/albummanager.cpp:1261
-msgid "Cannot move root tag"
+#: imageplugins/adjustcurves/adjustcurves.cpp:283
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:270
+#: imageplugins/adjustlevels/adjustlevels.cpp:295
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:292
+#: imageplugins/channelmixer/channelmixer.cpp:205
+#: imageplugins/channelmixer/channelmixertool.cpp:198
+msgid "&Reset"
msgstr ""
-#: digikam/albummanager.cpp:1279
-msgid "No such tag"
+#: imageplugins/adjustcurves/adjustcurves.cpp:285
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:272
+msgid "Reset current channel curves' values."
msgstr ""
-#: digikam/mimefilter.cpp:56
-msgid "All Files"
+#: imageplugins/adjustcurves/adjustcurves.cpp:286
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:273
+msgid ""
+" If you press this button, all curves' values from the current selected "
+"channel will be reset to the default values."
msgstr ""
-#: digikam/mimefilter.cpp:57 utilities/setup/setupmime.cpp:87
-msgid "Image Files"
+#: imageplugins/adjustcurves/adjustcurves.cpp:475
+msgid "Adjust Curve"
msgstr ""
-#: digikam/mimefilter.cpp:58
-msgid "No RAW Files"
+#: imageplugins/adjustcurves/adjustcurves.cpp:640
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:624
+msgid "Select Gimp Curves File to Load"
msgstr ""
-#: digikam/mimefilter.cpp:59
-msgid "JPEG Files"
+#: imageplugins/adjustcurves/adjustcurves.cpp:646
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:630
+msgid "Cannot load from the Gimp curves text file."
msgstr ""
-#: digikam/mimefilter.cpp:60
-msgid "PNG Files"
+#: imageplugins/adjustcurves/adjustcurves.cpp:662
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:645
+msgid "Gimp Curves File to Save"
msgstr ""
-#: digikam/mimefilter.cpp:61
-msgid "TIFF Files"
+#: imageplugins/adjustcurves/adjustcurves.cpp:668
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:651
+msgid "Cannot save to the Gimp curves text file."
msgstr ""
-#: digikam/mimefilter.cpp:62 utilities/setup/setupmime.cpp:180
-msgid "RAW Files"
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:99
+#: imageplugins/adjustcurves/adjustcurvestool.cpp:457
+msgid "Adjust Curves"
msgstr ""
-#: digikam/mimefilter.cpp:63 utilities/setup/setupmime.cpp:118
-msgid "Movie Files"
+#: imageplugins/adjustcurves/imageplugin_adjustcurves.cpp:47
+msgid "Curves Adjust..."
msgstr ""
-#: digikam/mimefilter.cpp:64 utilities/setup/setupmime.cpp:149
-msgid "Audio Files"
+#: imageplugins/adjustlevels/adjustlevels.cpp:82
+#: imageplugins/adjustlevels/adjustlevels.cpp:102
+msgid "Adjust Color Levels"
msgstr ""
-#: digikam/mimefilter.cpp:66
-msgid "Filter for file type"
+#: imageplugins/adjustlevels/adjustlevels.cpp:104
+msgid "An image-histogram-levels adjustment plugin for digiKam."
msgstr ""
-#: digikam/mimefilter.cpp:67
-msgid "Select the file types (mime types) you want to show"
+#: imageplugins/adjustlevels/adjustlevels.cpp:118
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:106
+msgid ""
+" Here you can see the image's level-adjustments preview. You can pick a "
+"spot on the image to see the corresponding level in the histogram."
msgstr ""
-#: digikam/albumfiletip.cpp:516 utilities/lighttable/lighttablebar.cpp:842
-msgid "digiKam Properties"
+#: imageplugins/adjustlevels/adjustlevels.cpp:137
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:130
+msgid ""
+" Here select the histogram channel to display: Luminosity: "
+"display the image's luminosity values. Red: display the red image-"
+"channel values. Green: display the green image-channel values."
+" Blue: display the blue image-channel values. Alpha: "
+"display the alpha image-channel values. This channel corresponds to the "
+"transparency value and is supported by some image formats, such as PNG or "
+"TIF."
msgstr ""
-#: digikam/albumfiletip.cpp:522 utilities/lighttable/lighttablebar.cpp:848
-msgid "Album:"
+#: imageplugins/adjustlevels/adjustlevels.cpp:150
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:143
+msgid ""
+" Here select the histogram scale. If the image's maximal counts are "
+"small, you can use the linear scale. The Logarithmic scale can be used "
+"when the maximal counts are big; if it is used, all values (small and large) "
+"will be visible on the graph."
msgstr ""
-#: digikam/albumfiletip.cpp:539 utilities/lighttable/lighttablebar.cpp:866
-msgid "Tags:"
+#: imageplugins/adjustlevels/adjustlevels.cpp:180
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:173
+msgid ""
+" Here you can see the target preview image histogram drawing of the "
+"selected image channel. This one is re-computed at any levels settings "
+"changes."
msgstr ""
-#: digikam/albumiconview.cpp:585 digikam/searchwidgets.cpp:73
-msgid "Album"
+#: imageplugins/adjustlevels/adjustlevels.cpp:186
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:179
+msgid ""
+" This is the histogram drawing of the selected channel from original image"
msgstr ""
-#: digikam/albumiconview.cpp:586
-msgid "Date"
+#: imageplugins/adjustlevels/adjustlevels.cpp:195
+#: imageplugins/adjustlevels/adjustlevels.cpp:211
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:188
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:205
+msgid " Select the minimal intensity input value of the histogram."
msgstr ""
-#: digikam/albumiconview.cpp:589 digikam/searchwidgets.cpp:77
-msgid "Tag"
+#: imageplugins/adjustlevels/adjustlevels.cpp:196
+#: imageplugins/adjustlevels/adjustlevels.cpp:212
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:189
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:206
+msgid "Minimal intensity input."
msgstr ""
-#: digikam/albumiconview.cpp:615 digikam/digikamapp.cpp:676
-msgid "View..."
+#: imageplugins/adjustlevels/adjustlevels.cpp:204
+#: imageplugins/adjustlevels/adjustlevels.cpp:224
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:197
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:219
+msgid " Select the maximal intensity input value of the histogram."
msgstr ""
-#: digikam/albumiconview.cpp:616 digikam/digikamapp.cpp:684
-#: digikam/imagepreviewview.cpp:375
-#: utilities/lighttable/lighttablepreview.cpp:386
-msgid "Edit..."
+#: imageplugins/adjustlevels/adjustlevels.cpp:205
+#: imageplugins/adjustlevels/adjustlevels.cpp:223
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:198
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:218
+msgid "Maximal intensity input."
msgstr ""
-#: digikam/albumiconview.cpp:617 digikam/digikamapp.cpp:702
-#: digikam/imagepreviewview.cpp:376
-msgid "Add to Light Table"
+#: imageplugins/adjustlevels/adjustlevels.cpp:218
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:212
+msgid "Gamma input value."
msgstr ""
-#: digikam/albumiconview.cpp:623
-msgid "Go To"
+#: imageplugins/adjustlevels/adjustlevels.cpp:219
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:213
+msgid " Select the gamma input value."
msgstr ""
-#: digikam/albumiconview.cpp:630 digikam/imagepreviewview.cpp:377
-#: utilities/lighttable/lighttablepreview.cpp:387
-msgid "Open With"
+#: imageplugins/adjustlevels/adjustlevels.cpp:228
+#: imageplugins/adjustlevels/adjustlevels.cpp:247
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:223
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:243
+msgid " Select the minimal intensity output value of the histogram."
msgstr ""
-#: digikam/albumiconview.cpp:700
-#, c-format
-msgid ""
-"_n: Move to Trash\n"
-"Move %n Files to Trash"
+#: imageplugins/adjustlevels/adjustlevels.cpp:229
+#: imageplugins/adjustlevels/adjustlevels.cpp:246
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:224
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:242
+msgid "Minimal intensity output."
msgstr ""
-#: digikam/albumiconview.cpp:715 digikam/imagepreviewview.cpp:425
-#: utilities/imageeditor/editor/imagewindow.cpp:568
-#: utilities/lighttable/lighttablepreview.cpp:405
-msgid "Assign Tag"
+#: imageplugins/adjustlevels/adjustlevels.cpp:237
+#: imageplugins/adjustlevels/adjustlevels.cpp:252
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:232
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:249
+msgid " Select the maximal intensity output value of the histogram."
msgstr ""
-#: digikam/albumiconview.cpp:717 digikam/imagepreviewview.cpp:426
-#: utilities/imageeditor/editor/imagewindow.cpp:569
-#: utilities/lighttable/lighttablepreview.cpp:406
-msgid "Remove Tag"
+#: imageplugins/adjustlevels/adjustlevels.cpp:238
+#: imageplugins/adjustlevels/adjustlevels.cpp:251
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:233
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:248
+msgid "Maximal intensity output."
msgstr ""
-#: digikam/albumiconview.cpp:734 digikam/imagepreviewview.cpp:447
-#: utilities/imageeditor/editor/imagewindow.cpp:590
-#: utilities/lighttable/lighttablebar.cpp:203
-#: utilities/lighttable/lighttablepreview.cpp:427
-msgid "Assign Rating"
+#: imageplugins/adjustlevels/adjustlevels.cpp:265
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:262
+msgid ""
+" With this button, you can pick the color from original image used to set "
+"Shadow Tone levels input on Red, Green, Blue, and Luminosity channels."
msgstr ""
-#: digikam/albumiconview.cpp:969 digikam/albumiconview.cpp:973
-msgid "Enter new name (without extension):"
+#: imageplugins/adjustlevels/adjustlevels.cpp:275
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:272
+msgid ""
+" With this button, you can pick the color from original image used to set "
+"Middle Tone levels input on Red, Green, Blue, and Luminosity channels."
msgstr ""
-#: digikam/albumiconview.cpp:1173
-#: utilities/imageeditor/editor/imagewindow.cpp:1181
-#: utilities/imageeditor/editor/imagewindow.cpp:1208
-#: utilities/imageeditor/editor/imagewindow.cpp:1240
-msgid "Album \"%1\""
+#: imageplugins/adjustlevels/adjustlevels.cpp:285
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:282
+msgid ""
+" With this button, you can pick the color from original image used to set "
+"Highlight Tone levels input on Red, Green, Blue, and Luminosity "
+"channels."
msgstr ""
-#: digikam/albumiconview.cpp:1502
-msgid "Assign '%1' to &Selected Items"
+#: imageplugins/adjustlevels/adjustlevels.cpp:291
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:288
+msgid "Adjust all levels automatically."
msgstr ""
-#: digikam/albumiconview.cpp:1506
-msgid "Assign '%1' to &This Item"
+#: imageplugins/adjustlevels/adjustlevels.cpp:292
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:289
+msgid ""
+" If you press this button, all channel levels will be adjusted "
+"automatically."
msgstr ""
-#: digikam/albumiconview.cpp:1509
-msgid "Assign '%1' to &All Items"
+#: imageplugins/adjustlevels/adjustlevels.cpp:297
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:294
+msgid "Reset current channel levels' values."
msgstr ""
-#: digikam/albumiconview.cpp:1581
-msgid "Assign Tags to &Selected Items"
+#: imageplugins/adjustlevels/adjustlevels.cpp:298
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:295
+msgid ""
+" If you press this button, all levels' values from the current selected "
+"channel will be reset to the default values."
msgstr ""
-#: digikam/albumiconview.cpp:1584
-msgid "Assign Tags to &This Item"
+#: imageplugins/adjustlevels/adjustlevels.cpp:615
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:598
+msgid "Adjust Level"
msgstr ""
-#: digikam/albumiconview.cpp:1586
-msgid "Assign Tags to &All Items"
+#: imageplugins/adjustlevels/adjustlevels.cpp:773
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:756
+msgid "Select Gimp Levels File to Load"
msgstr ""
-#: digikam/albumiconview.cpp:1866
-msgid "Revising Exif Orientation tags. Please wait..."
+#: imageplugins/adjustlevels/adjustlevels.cpp:779
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:762
+msgid "Cannot load from the Gimp levels text file."
msgstr ""
-#: digikam/albumiconview.cpp:1895
-#, c-format
-msgid "Failed to revise Exif orientation for file %1."
+#: imageplugins/adjustlevels/adjustlevels.cpp:794
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:776
+msgid "Gimp Levels File to Save"
msgstr ""
-#: digikam/albumiconview.cpp:1901
-msgid "Failed to revise Exif orientation these files:"
+#: imageplugins/adjustlevels/adjustlevels.cpp:800
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:782
+msgid "Cannot save to the Gimp levels text file."
msgstr ""
-#: digikam/albumiconview.cpp:2238
-msgid "Removing image tags. Please wait..."
+#: imageplugins/adjustlevels/adjustlevelstool.cpp:100
+msgid "Adjust Levels"
msgstr ""
-#: digikam/albumiconview.cpp:2248
-msgid "Assigning image ratings. Please wait..."
+#: imageplugins/adjustlevels/imageplugin_adjustlevels.cpp:48
+msgid "Levels Adjust..."
msgstr ""
-#: digikam/tagfilterview.cpp:108
-msgid "Not Tagged"
+#: imageplugins/antivignetting/antivignettingtool.cpp:73
+#: imageplugins/antivignetting/antivignettingtool.cpp:367
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:63
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:70
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:368
+msgid "Vignetting Correction"
msgstr ""
-#: digikam/digikamview.cpp:230 digikam/tagfilterview.cpp:279
-#: digikam/tagfilterview.cpp:557 digikam/tagfilterview.cpp:624
-#: digikam/tagfilterview.cpp:880
-msgid "Tag Filters"
+#: imageplugins/antivignetting/antivignettingtool.cpp:90
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:93
+msgid ""
+" You can see here a thumbnail preview of the anti-vignetting mask applied "
+"to the image."
msgstr ""
-#: digikam/tagfilterview.cpp:929
-msgid "Or Between Tags"
+#: imageplugins/antivignetting/antivignettingtool.cpp:95
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:99
+msgid "Density:"
msgstr ""
-#: digikam/tagfilterview.cpp:930
-msgid "And Between Tags"
+#: imageplugins/antivignetting/antivignettingtool.cpp:101
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:104
+msgid ""
+" This value controls the degree of intensity attenuation by the filter at "
+"its point of maximum density."
msgstr ""
-#: digikam/tagfilterview.cpp:932
-msgid "Matching Condition"
+#: imageplugins/antivignetting/antivignettingtool.cpp:106
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:112
+msgid "Power:"
msgstr ""
-#: digikam/kipiinterface.cpp:294 digikam/kipiinterface.cpp:310
-#, c-format
-msgid "Tag: %1"
+#: imageplugins/antivignetting/antivignettingtool.cpp:112
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:117
+msgid ""
+" This value is used as the exponent controlling the fall-off in density "
+"from the center of the filter to the periphery."
msgstr ""
-#: digikam/kipiinterface.cpp:661
-msgid "Target URL %1 is not valid."
+#: imageplugins/antivignetting/antivignettingtool.cpp:117
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:125
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:114
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:138
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:96
+#: imageplugins/noisereduction/noisereductiontool.cpp:94
+msgid "Radius:"
msgstr ""
-#: digikam/kipiinterface.cpp:669
-msgid "Target album is not in the album library."
+#: imageplugins/antivignetting/antivignettingtool.cpp:123
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:130
+msgid ""
+" This value is the radius of the center filter. It is a multiple of the "
+"half-diagonal measure of the image, at which the density of the filter falls "
+"to zero."
msgstr ""
-#: digikam/imagepreviewview.cpp:146
-#: utilities/imageeditor/canvas/canvas.cpp:168
-#: utilities/imageeditor/rawimport/rawpreview.cpp:101
-msgid "Pan the image to a region"
+#: imageplugins/antivignetting/antivignettingtool.cpp:131
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:142
+#: imageplugins/coreplugin/bcgtool.cpp:160
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:151
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:280
+msgid "Brightness:"
msgstr ""
-#: digikam/imagepreviewview.cpp:263
-msgid ""
-"Cannot display preview for\n"
-"\"%1\""
+#: imageplugins/antivignetting/antivignettingtool.cpp:136
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:146
+msgid " Set here the brightness re-adjustment of the target image."
msgstr ""
-#: digikam/digikamapp.cpp:534 digikam/imagepreviewview.cpp:366
-msgid "Forward"
+#: imageplugins/antivignetting/antivignettingtool.cpp:140
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:153
+#: imageplugins/coreplugin/bcgtool.cpp:166
+#: imageplugins/coreplugin/bwsepiatool.cpp:469
+#: imageplugins/coreplugin/iccprooftool.cpp:434
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:159
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:468
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:421
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:286
+msgid "Contrast:"
msgstr ""
-#: digikam/imagepreviewview.cpp:369
-msgid "Back to Album"
+#: imageplugins/antivignetting/antivignettingtool.cpp:145
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:157
+msgid " Set here the contrast re-adjustment of the target image."
msgstr ""
-#: digikam/imagepreviewview.cpp:374
-#: utilities/lighttable/lighttablepreview.cpp:385
-msgid "SlideShow"
+#: imageplugins/antivignetting/antivignettingtool.cpp:149
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:164
+#: imageplugins/coreplugin/bcgtool.cpp:172
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:167
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:233
+#: imageplugins/noisereduction/noisereductiontool.cpp:231
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:263
+#: imageplugins/whitebalance/whitebalancetool.cpp:265
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:292
+msgid "Gamma:"
msgstr ""
-#: digikam/imagepreviewview.cpp:412 showfoto/showfoto.cpp:560
-#: utilities/imageeditor/editor/editorwindow.cpp:295
-#: utilities/lighttable/lighttablepreview.cpp:392
-#: utilities/lighttable/lighttablewindow.cpp:378
-msgid "Move to Trash"
+#: imageplugins/antivignetting/antivignettingtool.cpp:155
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:170
+msgid " Set here the gamma re-adjustment of the target image."
msgstr ""
-#: digikam/timelinewidget.cpp:282
-msgid "Week #%1 - %2 %3"
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:72
+msgid "A digiKam image plugin to reduce image vignetting."
msgstr ""
-#: digikam/datefolderview.cpp:194
-msgid "My Calendar"
+#: imageplugins/antivignetting/imageeffect_antivignetting.cpp:81
+msgid "Anti Vignetting algorithm"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:94
-msgid "Advanced Search"
+#: imageplugins/antivignetting/imageplugin_antivignetting.cpp:48
+msgid "Vignetting Correction..."
msgstr ""
-#: digikam/searchadvanceddialog.cpp:113
-msgid ""
-" Here you can review the images found using the current search settings."
+#: imageplugins/blurfx/blurfxtool.cpp:68
+msgid "Blur FX"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:122
-msgid "Search Rules"
+#: imageplugins/blurfx/blurfxtool.cpp:83
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:93
+msgid "Zoom Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:123
-msgid ""
-" Here you can review the search rules used to filter image-searching in album "
-"library."
+#: imageplugins/blurfx/blurfxtool.cpp:84
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:94
+msgid "Radial Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:133
-msgid "Add/Delete Option"
+#: imageplugins/blurfx/blurfxtool.cpp:85
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:95
+msgid "Far Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:134
-msgid " You can edit the search rules by adding/removing criteria."
+#: imageplugins/blurfx/blurfxtool.cpp:86
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:96
+msgid "Motion Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:141 digikam/searchwidgets.cpp:138
-#: digikam/searchwidgets.cpp:261 digikam/searchwidgets.cpp:483
-#: digikam/searchwidgets.cpp:593
-msgid "As well as"
+#: imageplugins/blurfx/blurfxtool.cpp:87
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:97
+msgid "Softener Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:142 digikam/searchwidgets.cpp:138
-#: digikam/searchwidgets.cpp:256 digikam/searchwidgets.cpp:483
-#: digikam/searchwidgets.cpp:593
-msgid "Or"
+#: imageplugins/blurfx/blurfxtool.cpp:88
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:98
+msgid "Skake Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:145
-msgid "&Add"
+#: imageplugins/blurfx/blurfxtool.cpp:89
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:99
+msgid "Focus Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:146
-msgid "&Del"
+#: imageplugins/blurfx/blurfxtool.cpp:90
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:100
+msgid "Smart Blur"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:159
-msgid "Group/Ungroup Options"
+#: imageplugins/blurfx/blurfxtool.cpp:91
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:101
+msgid "Frost Glass"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:160
-msgid ""
-" You can group or ungroup any search criteria from the Search Rule set."
+#: imageplugins/blurfx/blurfxtool.cpp:92
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:102
+msgid "Mosaic"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:165
-msgid "&Group"
+#: imageplugins/blurfx/blurfxtool.cpp:94
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:103
+msgid ""
+" Select the blurring effect to apply to the image. Zoom Blur: "
+"blurs the image along radial lines starting from a specified center point. "
+"This simulates the blur of a zooming camera. Radial Blur: blurs the "
+"image by rotating the pixels around the specified center point. This "
+"simulates the blur of a rotating camera. Far Blur: blurs the image "
+"by using far pixels. This simulates the blur of an unfocalized camera lens."
+" Motion Blur: blurs the image by moving the pixels horizontally. "
+"This simulates the blur of a linear moving camera. Softener Blur: "
+"blurs the image softly in dark tones and hardly in light tones. This gives "
+"images a dreamy and glossy soft focus effect. It's ideal for creating "
+"romantic portraits, glamour photographs, or giving images a warm and subtle "
+"glow. Skake Blur: blurs the image by skaking randomly the pixels. "
+"This simulates the blur of a random moving camera. Focus Blur: "
+"blurs the image corners to reproduce the astigmatism distortion of a lens."
+" Smart Blur: finds the edges of color in your image and blurs them "
+"without muddying the rest of the image. Frost Glass: blurs the "
+"image by randomly disperse light coming through a frosted glass."
+" Mosaic: divides the photograph into rectangular cells and then "
+"recreates it by filling those cells with average pixel value."
msgstr ""
-#: digikam/searchadvanceddialog.cpp:166
-msgid "&Ungroup"
+#: imageplugins/blurfx/blurfxtool.cpp:118
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:129
+msgid "Distance:"
msgstr ""
-#: digikam/searchadvanceddialog.cpp:180
-msgid "&Save search as: "
+#: imageplugins/blurfx/blurfxtool.cpp:122
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:132
+msgid " Set here the blur distance in pixels."
msgstr ""
-#: digikam/searchadvanceddialog.cpp:182
-msgid ""
-" Enter the name used to save the current search in \"My Searches\" view"
+#: imageplugins/blurfx/blurfxtool.cpp:124
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:137
+#: imageplugins/colorfx/colorfxtool.cpp:178
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:189
+#: imageplugins/distortionfx/distortionfxtool.cpp:140
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:146
+msgid "Level:"
msgstr ""
-#: digikam/ratingfilter.cpp:80
-msgid ""
-"Select the rating value used to filter albums contents. Use contextual pop-up "
-"menu to set rating filter condition."
+#: imageplugins/blurfx/blurfxtool.cpp:128
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:140
+msgid " This value controls the level to use with the current effect."
msgstr ""
-#: digikam/ratingfilter.cpp:151
-msgid "Rating Filter"
+#: imageplugins/blurfx/blurfxtool.cpp:399
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:64
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:383
+msgid "Blur Effects"
msgstr ""
-#: digikam/ratingfilter.cpp:153
-msgid "Greater Equal Condition"
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:57
+msgid "Apply Blurring Special Effect to Photograph"
msgstr ""
-#: digikam/ratingfilter.cpp:154
-msgid "Equal Condition"
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:66
+msgid "A digiKam image plugin to apply blurring special effect to an image."
msgstr ""
-#: digikam/ratingfilter.cpp:155
-msgid "Less Equal Condition"
+#: imageplugins/blurfx/imageeffect_blurfx.cpp:77
+msgid "Blurring algorithms"
msgstr ""
-#: digikam/ratingfilter.cpp:187
-#, c-format
-msgid "Rating >= %1"
+#: imageplugins/blurfx/imageplugin_blurfx.cpp:48
+msgid "Blur Effects..."
msgstr ""
-#: digikam/ratingfilter.cpp:192
-#, c-format
-msgid "Rating = %1"
+#: imageplugins/border/bordertool.cpp:70 imageplugins/border/bordertool.cpp:570
+#: imageplugins/border/imageeffect_border.cpp:70
+#: imageplugins/border/imageeffect_border.cpp:568
+msgid "Add Border"
msgstr ""
-#: digikam/ratingfilter.cpp:197
-#, c-format
-msgid "Rating <= %1"
+#: imageplugins/border/bordertool.cpp:88
+#: imageplugins/border/imageeffect_border.cpp:95
+msgid "Solid"
msgstr ""
-#: digikam/digikamapp.cpp:127
-msgid "Initializing..."
+#: imageplugins/border/bordertool.cpp:91
+#: imageplugins/border/imageeffect_border.cpp:98
+msgid "Beveled"
msgstr ""
-#: digikam/digikamapp.cpp:162 showfoto/showfoto.cpp:179
-msgid "Checking ICC repository"
+#: imageplugins/border/bordertool.cpp:92
+#: imageplugins/border/imageeffect_border.cpp:99
+msgid "Decorative Pine"
msgstr ""
-#: digikam/digikamapp.cpp:170 showfoto/showfoto.cpp:187
-msgid "Checking dcraw version"
+#: imageplugins/border/bordertool.cpp:93
+#: imageplugins/border/imageeffect_border.cpp:100
+msgid "Decorative Wood"
msgstr ""
-#: digikam/digikamapp.cpp:176
-msgid "Scan Albums"
+#: imageplugins/border/bordertool.cpp:94
+#: imageplugins/border/imageeffect_border.cpp:101
+msgid "Decorative Paper"
msgstr ""
-#: digikam/digikamapp.cpp:182
-msgid "Reading database"
+#: imageplugins/border/bordertool.cpp:95
+#: imageplugins/border/imageeffect_border.cpp:102
+msgid "Decorative Parquet"
msgstr ""
-#: digikam/digikamapp.cpp:265
-msgid ""
-" ICC profiles path seems to be invalid. If you want to set it now, select \"Yes\", otherwise select \"No\". In this "
-"case, \"Color Management\" feature will be disabled until you solve this "
-"issue Select the border type to add around the image."
msgstr ""
-#: digikam/digikamapp.cpp:510
-#: utilities/imageeditor/editor/editorwindow.cpp:481
-#: utilities/lighttable/lighttablewindow.cpp:440
-msgid "&Themes"
+#: imageplugins/border/bordertool.cpp:116
+#: imageplugins/border/imageeffect_border.cpp:122
+msgid "Preserve Aspect Ratio"
msgstr ""
-#: digikam/digikamapp.cpp:519
-msgid "&Back"
+#: imageplugins/border/bordertool.cpp:117
+#: imageplugins/border/imageeffect_border.cpp:123
+msgid ""
+"Enable this option if you want to preserve the aspect ratio of the image. If "
+"enabled, the border width will be in percent of the image size, else the "
+"border width will in pixels."
msgstr ""
-#: digikam/digikamapp.cpp:549
-msgid "&New..."
+#: imageplugins/border/bordertool.cpp:122
+#: imageplugins/border/imageeffect_border.cpp:128
+#: utilities/imageeditor/tools/imageresize.cpp:194
+msgid "Width (%):"
msgstr ""
-#: digikam/digikamapp.cpp:556
-msgid "Creates a new empty Album in the database."
+#: imageplugins/border/bordertool.cpp:126
+#: imageplugins/border/imageeffect_border.cpp:131
+msgid " Set here the border width in percent of the image size."
msgstr ""
-#: digikam/digikamapp.cpp:558
-msgid "&Sort Albums"
+#: imageplugins/border/bordertool.cpp:128
+#: imageplugins/border/imageeffect_border.cpp:133
+msgid "Width (pixels):"
msgstr ""
-#: digikam/digikamapp.cpp:569
-msgid "By Folder"
+#: imageplugins/border/bordertool.cpp:131
+#: imageplugins/border/imageeffect_border.cpp:135
+msgid " Set here the border width in pixels to add around the image."
msgstr ""
-#: digikam/digikamapp.cpp:570
-msgid "By Collection"
+#: imageplugins/border/bordertool.cpp:384
+#: imageplugins/border/imageeffect_border.cpp:382
+msgid "First:"
msgstr ""
-#: digikam/digikamapp.cpp:571 digikam/digikamapp.cpp:769
-msgid "By Date"
+#: imageplugins/border/bordertool.cpp:385
+#: imageplugins/border/imageeffect_border.cpp:383
+msgid "Second:"
msgstr ""
-#: digikam/digikamapp.cpp:574
-msgid "Include Album Sub-Tree"
+#: imageplugins/border/bordertool.cpp:386
+#: imageplugins/border/imageeffect_border.cpp:384
+msgid " Set here the foreground color of the border."
msgstr ""
-#: digikam/digikamapp.cpp:580
-msgid ""
-"Activate this option to recursively show all sub-albums below the current "
-"album."
+#: imageplugins/border/bordertool.cpp:387
+#: imageplugins/border/imageeffect_border.cpp:385
+msgid " Set here the Background color of the border."
msgstr ""
-#: digikam/digikamapp.cpp:586
-msgid "Include Tag Sub-Tree"
+#: imageplugins/border/bordertool.cpp:403
+#: imageplugins/border/imageeffect_border.cpp:401
+msgid " Set here the color of the main border."
msgstr ""
-#: digikam/digikamapp.cpp:592
-msgid ""
-"Activate this option to show all images marked by the given tag and its all its "
-"sub-tags."
+#: imageplugins/border/bordertool.cpp:404
+#: imageplugins/border/imageeffect_border.cpp:402
+msgid " Set here the color of the line."
msgstr ""
-#: digikam/digikamapp.cpp:606
-msgid "Add Images..."
+#: imageplugins/border/bordertool.cpp:410
+#: imageplugins/border/imageeffect_border.cpp:408
+msgid " Set here the color of the upper left area."
msgstr ""
-#: digikam/digikamapp.cpp:613
-msgid "Adds new items to the current Album."
+#: imageplugins/border/bordertool.cpp:411
+#: imageplugins/border/imageeffect_border.cpp:409
+msgid " Set here the color of the lower right area."
msgstr ""
-#: digikam/digikamapp.cpp:615
-msgid "Add Folders..."
+#: imageplugins/border/bordertool.cpp:432
+#: imageplugins/border/imageeffect_border.cpp:430
+msgid " Set here the color of the first line."
msgstr ""
-#: digikam/digikamapp.cpp:623
-msgid "Properties..."
+#: imageplugins/border/bordertool.cpp:433
+#: imageplugins/border/imageeffect_border.cpp:431
+msgid " Set here the color of the second line."
msgstr ""
-#: digikam/digikamapp.cpp:630
-msgid "Edit Album Properties and Collection information."
+#: imageplugins/border/imageeffect_border.cpp:60
+msgid "Add Border Around Photograph"
msgstr ""
-#: digikam/digikamapp.cpp:632
-msgid "Refresh"
+#: imageplugins/border/imageeffect_border.cpp:72
+msgid "A digiKam image plugin to add a border around an image."
msgstr ""
-#: digikam/digikamapp.cpp:639
-msgid "Refresh all album contents"
+#: imageplugins/border/imageplugin_border.cpp:48
+msgid "Add Border..."
msgstr ""
-#: digikam/digikamapp.cpp:641
-msgid "Synchronize Images with Database"
+#: imageplugins/channelmixer/channelmixer.cpp:92
+#: imageplugins/channelmixer/channelmixer.cpp:100
+msgid "Color Channel Mixer"
msgstr ""
-#: digikam/digikamapp.cpp:648
+#: imageplugins/channelmixer/channelmixer.cpp:102
+msgid "An image color channel mixer plugin for digiKam."
+msgstr ""
+
+#: imageplugins/channelmixer/channelmixer.cpp:116
+#: imageplugins/channelmixer/channelmixertool.cpp:106
msgid ""
-"Updates all image metadata of the current album with the contents of the "
-"digiKam database (image metadata will be over-written with data from the "
-"database)."
+" You can see here the image's color channels' gains adjustments preview. "
+"You can pick color on image to see the color level corresponding on "
+"histogram."
msgstr ""
-#: digikam/digikamapp.cpp:652
-msgid "Open in File Manager"
+#: imageplugins/channelmixer/channelmixer.cpp:133
+#: imageplugins/channelmixer/channelmixertool.cpp:127
+msgid ""
+" Select the color channel to mix here: Red: display the red image-"
+"channel values. Green: display the green image-channel values."
+" Blue: display the blue image-channel values. "
msgstr ""
-#: digikam/digikamapp.cpp:662
-msgid "New &Tag..."
+#: imageplugins/channelmixer/channelmixer.cpp:175
+#: imageplugins/channelmixer/channelmixertool.cpp:167
+msgid ""
+" Here you can see the target preview image histogram drawing of the "
+"selected image channel. This one is re-computed at any mixer settings "
+"changes."
msgstr ""
-#: digikam/digikamapp.cpp:691
-msgid "Open the selected item in the image editor."
+#: imageplugins/channelmixer/channelmixer.cpp:187
+#: imageplugins/channelmixer/channelmixertool.cpp:177
+msgid "Red:"
msgstr ""
-#: digikam/digikamapp.cpp:693
-msgid "Place onto Light Table"
+#: imageplugins/channelmixer/channelmixer.cpp:191
+#: imageplugins/channelmixer/channelmixertool.cpp:182
+msgid " Select the red color gain in percent for the current channel here."
msgstr ""
-#: digikam/digikamapp.cpp:700
-msgid "Place the selected items on the light table thumbbar."
+#: imageplugins/channelmixer/channelmixer.cpp:193
+#: imageplugins/channelmixer/channelmixertool.cpp:184
+msgid "Blue:"
msgstr ""
-#: digikam/digikamapp.cpp:709
-msgid "Add selected items to the light table thumbbar."
+#: imageplugins/channelmixer/channelmixer.cpp:197
+#: imageplugins/channelmixer/channelmixertool.cpp:189
+msgid " Select the green color gain in percent for the current channel here."
msgstr ""
-#: digikam/digikamapp.cpp:718
-msgid "Change the filename of the currently selected item."
+#: imageplugins/channelmixer/channelmixer.cpp:199
+#: imageplugins/channelmixer/channelmixertool.cpp:191
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:269
+#: imageplugins/whitebalance/whitebalancetool.cpp:272
+msgid "Green:"
msgstr ""
-#: digikam/digikamapp.cpp:730
-msgid "Delete permanently"
+#: imageplugins/channelmixer/channelmixer.cpp:203
+#: imageplugins/channelmixer/channelmixertool.cpp:196
+msgid " Select the blue color gain in percent for the current channel here."
msgstr ""
-#: digikam/digikamapp.cpp:740
-msgid "Delete permanently without confirmation"
+#: imageplugins/channelmixer/channelmixer.cpp:206
+#: imageplugins/channelmixer/channelmixertool.cpp:199
+msgid ""
+"Reset color channels' gains settings from the currently selected channel."
msgstr ""
-#: digikam/digikamapp.cpp:748
-msgid "Move to trash without confirmation"
+#: imageplugins/channelmixer/channelmixer.cpp:218
+#: imageplugins/channelmixer/channelmixertool.cpp:203
+msgid "Monochrome"
msgstr ""
-#: digikam/digikamapp.cpp:756
-msgid "&Sort Images"
+#: imageplugins/channelmixer/channelmixer.cpp:219
+#: imageplugins/channelmixer/channelmixertool.cpp:204
+msgid ""
+" Enable this option if you want the image rendered in monochrome mode. In "
+"this mode, the histogram will display only luminosity values."
msgstr ""
-#: digikam/digikamapp.cpp:767
-msgid "By Name"
+#: imageplugins/channelmixer/channelmixer.cpp:222
+#: imageplugins/channelmixer/channelmixertool.cpp:207
+msgid "Preserve luminosity"
msgstr ""
-#: digikam/digikamapp.cpp:768
-msgid "By Path"
+#: imageplugins/channelmixer/channelmixer.cpp:223
+#: imageplugins/channelmixer/channelmixertool.cpp:208
+msgid " Enable this option is you want preserve the image luminosity."
msgstr ""
-#: digikam/digikamapp.cpp:770
-msgid "By File Size"
+#: imageplugins/channelmixer/channelmixer.cpp:481
+#: imageplugins/channelmixer/channelmixertool.cpp:100
+#: imageplugins/channelmixer/channelmixertool.cpp:474
+msgid "Channel Mixer"
msgstr ""
-#: digikam/digikamapp.cpp:771
-msgid "By Rating"
+#: imageplugins/channelmixer/channelmixer.cpp:631
+#: imageplugins/channelmixer/channelmixertool.cpp:623
+msgid "Select Gimp Gains Mixer File to Load"
msgstr ""
-#: digikam/digikamapp.cpp:781
-msgid "Adjust Exif orientation tag"
+#: imageplugins/channelmixer/channelmixer.cpp:703
+#: imageplugins/channelmixer/channelmixertool.cpp:695
+msgid "Cannot load settings from the Gains Mixer text file."
msgstr ""
-#: digikam/digikamapp.cpp:786
-msgid "Normal"
+#: imageplugins/channelmixer/channelmixer.cpp:716
+#: imageplugins/channelmixer/channelmixertool.cpp:707
+msgid "Gimp Gains Mixer File to Save"
msgstr ""
-#: digikam/digikamapp.cpp:792
-msgid "Flipped Horizontally"
+#: imageplugins/channelmixer/channelmixer.cpp:778
+#: imageplugins/channelmixer/channelmixertool.cpp:769
+msgid "Cannot save settings to the Gains Mixer text file."
msgstr ""
-#: digikam/digikamapp.cpp:798
-msgid "Rotated Upside Down"
+#: imageplugins/channelmixer/imageplugin_channelmixer.cpp:48
+msgid "Channel Mixer..."
msgstr ""
-#: digikam/digikamapp.cpp:804
-msgid "Flipped Vertically"
+#: imageplugins/charcoal/charcoaltool.cpp:66
+#: imageplugins/charcoal/charcoaltool.cpp:199
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:189
+msgid "Charcoal"
msgstr ""
-#: digikam/digikamapp.cpp:810
-msgid "Rotated Right / Horiz. Flipped"
+#: imageplugins/charcoal/charcoaltool.cpp:77
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:80
+msgid "Pencil size:"
msgstr ""
-#: digikam/digikamapp.cpp:816
-msgid "Rotated Right"
+#: imageplugins/charcoal/charcoaltool.cpp:82
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:85
+msgid " Set here the charcoal pencil size used to simulate the drawing."
msgstr ""
-#: digikam/digikamapp.cpp:822
-msgid "Rotated Right / Vert. Flipped"
+#: imageplugins/charcoal/charcoaltool.cpp:86
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:92
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:155
+#: imageplugins/coreplugin/redeyetool.cpp:170
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:101
+#: imageplugins/oilpaint/oilpainttool.cpp:89
+msgid "Smooth:"
msgstr ""
-#: digikam/digikamapp.cpp:828
-msgid "Rotated Left"
+#: imageplugins/charcoal/charcoaltool.cpp:91
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:97
+msgid ""
+" This value controls the smoothing effect of the pencil under the canvas."
msgstr ""
-#: digikam/digikamapp.cpp:887
-#: utilities/imageeditor/editor/editorwindow.cpp:343
-msgid "Select None"
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:56
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:63
+msgid "Charcoal Drawing"
msgstr ""
-#: digikam/digikamapp.cpp:929
-#: utilities/imageeditor/editor/editorwindow.cpp:359
-#: utilities/lighttable/lighttablewindow.cpp:410
-#, c-format
-msgid "Zoom to 100%"
+#: imageplugins/charcoal/imageeffect_charcoal.cpp:65
+msgid "A digiKam charcoal drawing image effect plugin."
msgstr ""
-#: digikam/digikamapp.cpp:937
-#: utilities/imageeditor/editor/editorwindow.cpp:365
-#: utilities/lighttable/lighttablepreview.cpp:380
-#: utilities/lighttable/lighttablewindow.cpp:415
-msgid "Fit to &Window"
+#: imageplugins/charcoal/imageplugin_charcoal.cpp:50
+msgid "Charcoal Drawing..."
msgstr ""
-#: digikam/digikamapp.cpp:946
-#: utilities/imageeditor/editor/editorwindow.cpp:404
-#: utilities/lighttable/lighttablewindow.cpp:420
-msgid "Full Screen"
+#: imageplugins/colorfx/colorfxtool.cpp:83
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:81
+msgid "Color Effects"
msgstr ""
-#: digikam/digikamapp.cpp:953
-msgid "Switch the window to full screen mode"
+#: imageplugins/colorfx/colorfxtool.cpp:91
+msgid " This is the color effects preview"
msgstr ""
-#: digikam/digikamapp.cpp:955
-#: utilities/imageeditor/editor/editorwindow.cpp:410
-#: utilities/lighttable/lighttablewindow.cpp:426
-msgid "Slideshow"
+#: imageplugins/colorfx/colorfxtool.cpp:110
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:116
+#: imageplugins/coreplugin/autocorrectiontool.cpp:110
+#: imageplugins/coreplugin/bcgtool.cpp:109
+#: imageplugins/coreplugin/bwsepiatool.cpp:200
+#: imageplugins/coreplugin/hsl/hsltool.cpp:113
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:96
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:103
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:96
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:198
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:94
+#: imageplugins/coreplugin/rgbtool.cpp:107
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:132
+#: imageplugins/whitebalance/whitebalancetool.cpp:128
+msgid ""
+" Select the histogram channel to display here: Luminosity: "
+"display the image's luminosity values. Red: display the red image-"
+"channel values. Green: display the green image-channel values."
+" Blue: display the blue image-channel values. "
msgstr ""
-#: digikam/digikamapp.cpp:960
-msgid "All"
+#: imageplugins/colorfx/colorfxtool.cpp:151
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:159
+#: imageplugins/coreplugin/autocorrectiontool.cpp:151
+#: imageplugins/coreplugin/bcgtool.cpp:150
+#: imageplugins/coreplugin/bwsepiatool.cpp:243
+#: imageplugins/coreplugin/hsl/hsltool.cpp:156
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:139
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:146
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:139
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:241
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:137
+#: imageplugins/coreplugin/rgbtool.cpp:150
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:229
+msgid ""
+" Here you can see the target preview image histogram drawing of the "
+"selected image channel. This one is re-computed at any settings changes."
msgstr ""
-#: digikam/digikamapp.cpp:965
-msgid "Selection"
+#: imageplugins/colorfx/colorfxtool.cpp:164
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:174
+msgid "Solarize"
msgstr ""
-#: digikam/digikamapp.cpp:972
-msgid "With All Sub-Albums"
+#: imageplugins/colorfx/colorfxtool.cpp:165
+#: imageplugins/colorfx/colorfxtool.cpp:408
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:175
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:398
+msgid "Vivid"
msgstr ""
-#: digikam/digikamapp.cpp:984
-#: utilities/imageeditor/editor/editorwindow.cpp:504
-#: utilities/lighttable/lighttablewindow.cpp:462
-msgid "Supported RAW Cameras"
+#: imageplugins/colorfx/colorfxtool.cpp:166
+#: imageplugins/colorfx/colorfxtool.cpp:412
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:176
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:402
+msgid "Neon"
msgstr ""
-#: digikam/digikamapp.cpp:992
-msgid "Kipi Plugins Handbook"
+#: imageplugins/colorfx/colorfxtool.cpp:167
+#: imageplugins/colorfx/colorfxtool.cpp:416
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:177
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:406
+msgid "Find Edges"
msgstr ""
-#: digikam/digikamapp.cpp:1005
-#: utilities/imageeditor/editor/editorwindow.cpp:492
-#: utilities/lighttable/lighttablewindow.cpp:450
-msgid "Donate..."
+#: imageplugins/colorfx/colorfxtool.cpp:169
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:178
+msgid ""
+" Select the effect type to apply to the image here. Solarize: "
+"simulates solarization of photograph. Vivid: simulates the "
+"Velvia(tm) slide film colors. Neon: coloring the edges in a "
+"photograph to reproduce a fluorescent light effect. Find Edges: "
+"detects the edges in a photograph and their strength."
msgstr ""
-#: digikam/digikamapp.cpp:1013
-#: utilities/imageeditor/editor/editorwindow.cpp:498
-#: utilities/lighttable/lighttablewindow.cpp:456
-msgid "Contribute..."
+#: imageplugins/colorfx/colorfxtool.cpp:182
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:192
+#: imageplugins/distortionfx/distortionfxtool.cpp:144
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:149
+msgid " Set here the level of the effect."
msgstr ""
-#: digikam/digikamapp.cpp:1023
-#: utilities/imageeditor/editor/imagewindow.cpp:314
-#: utilities/lighttable/lighttablewindow.cpp:479
-msgid "Assign Rating \"No Stars\""
+#: imageplugins/colorfx/colorfxtool.cpp:184
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:197
+#: imageplugins/distortionfx/distortionfxtool.cpp:147
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:154
+msgid "Iteration:"
msgstr ""
-#: digikam/digikamapp.cpp:1026
-#: utilities/imageeditor/editor/imagewindow.cpp:317
-#: utilities/lighttable/lighttablewindow.cpp:482
-msgid "Assign Rating \"One Star\""
+#: imageplugins/colorfx/colorfxtool.cpp:188
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:200
+msgid ""
+" This value controls the number of iterations to use with the Neon and "
+"Find Edges effects."
msgstr ""
-#: digikam/digikamapp.cpp:1029
-#: utilities/imageeditor/editor/imagewindow.cpp:320
-#: utilities/lighttable/lighttablewindow.cpp:485
-msgid "Assign Rating \"Two Stars\""
+#: imageplugins/colorfx/colorfxtool.cpp:404
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:394
+msgid "ColorFX"
msgstr ""
-#: digikam/digikamapp.cpp:1032
-#: utilities/imageeditor/editor/imagewindow.cpp:323
-#: utilities/lighttable/lighttablewindow.cpp:488
-msgid "Assign Rating \"Three Stars\""
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:73
+msgid "Apply Color Special Effects to Photograph"
msgstr ""
-#: digikam/digikamapp.cpp:1035
-#: utilities/imageeditor/editor/imagewindow.cpp:326
-#: utilities/lighttable/lighttablewindow.cpp:491
-msgid "Assign Rating \"Four Stars\""
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:83
+msgid "A digiKam plugin to apply special color effects to an image."
msgstr ""
-#: digikam/digikamapp.cpp:1038
-#: utilities/imageeditor/editor/imagewindow.cpp:329
-#: utilities/lighttable/lighttablewindow.cpp:494
-msgid "Assign Rating \"Five Stars\""
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:89
+msgid "Original Author"
msgstr ""
-#: digikam/digikamapp.cpp:1051
-msgid "Advanced Search..."
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:92
+msgid "Maintainer"
msgstr ""
-#: digikam/digikamapp.cpp:1054 utilities/lighttable/lighttablewindow.cpp:95
-#: utilities/lighttable/lighttablewindow.cpp:1242
-#: utilities/setup/setup.cpp:166
-msgid "Light Table"
+#: imageplugins/colorfx/imageeffect_colorfx.cpp:100
+msgid " This is the color effect preview"
msgstr ""
-#: digikam/digikamapp.cpp:1058
-msgid "Scan for New Images"
+#: imageplugins/colorfx/imageplugin_colorfx.cpp:50
+msgid "Color Effects..."
msgstr ""
-#: digikam/digikamapp.cpp:1062
-msgid "Rebuild All Thumbnails..."
+#: imageplugins/coreplugin/autocorrectiontool.cpp:79
+msgid "Auto-Correction"
msgstr ""
-#: digikam/digikamapp.cpp:1066
-msgid "Update Metadata Database..."
+#: imageplugins/coreplugin/autocorrectiontool.cpp:86
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:83
+msgid ""
+" Here you can see the auto-color correction tool preview. You can pick "
+"color on image to see the color level corresponding on histogram."
msgstr ""
-#: digikam/digikamapp.cpp:1081
-msgid "Loading cameras"
+#: imageplugins/coreplugin/autocorrectiontool.cpp:168
+#: imageplugins/coreplugin/autocorrectiontool.cpp:378
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:165
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:370
+msgid "Auto Levels"
msgstr ""
-#: digikam/digikamapp.cpp:1306
-msgid "No item selected"
+#: imageplugins/coreplugin/autocorrectiontool.cpp:169
+#: imageplugins/coreplugin/imageeffect_autocorrection.cpp:166
+msgid ""
+"Auto Levels: This option maximizes the tonal range in the Red, "
+"Green, and Blue channels. It searches the image shadow and highlight limit "
+"values and adjusts the Red, Green, and Blue channels to a full histogram "
+"range. This option scales brightness values across the active "
+"image so that the darkest point becomes black, and the brightest point "
+"becomes as bright as possible without altering its hue. This is often a "
+"\"magic fix\" for images that are dim or washed out. This option adjusts the brightness of colors across the "
+"active image so that the histogram for the value channel is as nearly as "
+"possible flat, that is, so that each possible brightness value appears at "
+"about the same number of pixels as each other value. Sometimes Equalize "
+"works wonderfully at enhancing the contrasts in an image. Other times it "
+"gives garbage. It is a very powerful operation, which can either work "
+"miracles on an image or destroy it. This option enhances the contrast and brightness "
+"of the RGB values of an image by stretching the lowest and highest values to "
+"their fullest range, adjusting everything in between. This option enhances the contrast and brightness of "
+"the RGB values of an image to calculate optimal exposition and black level "
+"using image histogram properties. Here you can see the image brightness-contrast-gamma adjustments preview. "
+"You can pick color on image to see the color level corresponding on "
+"histogram."
msgstr ""
-#: digikam/digikamapp.cpp:2001
-msgid ""
-"Updating the metadata database can take some time. \n"
-"Do you want to continue?"
+#: imageplugins/coreplugin/bcgtool.cpp:164
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:155
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:284
+msgid " Set here the brightness adjustment of the image."
msgstr ""
-#: digikam/digikamapp.cpp:2047
-#, c-format
-msgid "Size: %1"
+#: imageplugins/coreplugin/bcgtool.cpp:170
+#: imageplugins/coreplugin/bwsepiatool.cpp:472
+#: imageplugins/coreplugin/iccprooftool.cpp:437
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:163
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:471
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:424
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:290
+msgid " Set here the contrast adjustment of the image."
msgstr ""
-#: digikam/digikamapp.cpp:2053 utilities/lighttable/lighttablewindow.cpp:1552
-#: utilities/lighttable/lighttablewindow.cpp:1575
-msgid "zoom: %1%"
+#: imageplugins/coreplugin/bcgtool.cpp:177
+#: imageplugins/coreplugin/imageeffect_bcg.cpp:172
+msgid " Set here the gamma adjustment of the image."
msgstr ""
-#: digikam/digikamapp.cpp:2081
-msgid "Select folder to parse"
+#: imageplugins/coreplugin/blurtool.cpp:66
+msgid "Blur"
msgstr ""
-#: digikam/albumicongroupitem.cpp:103
-msgid ""
-"_n: %1 %2 - 1 Item\n"
-"%1 %2 - %n Items"
+#: imageplugins/coreplugin/blurtool.cpp:78
+#: imageplugins/coreplugin/imageeffect_blur.cpp:61
+msgid "Smoothness:"
msgstr ""
-#: digikam/searchwidgets.cpp:74
-msgid "Album Name"
+#: imageplugins/coreplugin/blurtool.cpp:83
+#: imageplugins/coreplugin/imageeffect_blur.cpp:66
+msgid ""
+" A smoothness of 0 has no effect, 1 and above determine the Gaussian blur "
+"matrix radius that determines how much to blur the image."
msgstr ""
-#: digikam/searchwidgets.cpp:75
-msgid "Album Caption"
+#: imageplugins/coreplugin/blurtool.cpp:161
+#: imageplugins/coreplugin/imageeffect_blur.cpp:138
+msgid "Gaussian Blur"
msgstr ""
-#: digikam/searchwidgets.cpp:76
-msgid "Album Collection"
+#: imageplugins/coreplugin/bwsepiatool.cpp:165
+msgid "Black && White"
msgstr ""
-#: digikam/searchwidgets.cpp:78
-msgid "Tag Name"
+#: imageplugins/coreplugin/bwsepiatool.cpp:178
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:181
+msgid ""
+" Here you can see the black and white conversion tool preview. You can "
+"pick color on image to see the color level corresponding on histogram."
msgstr ""
-#: digikam/searchwidgets.cpp:79
-msgid "Image Name"
+#: imageplugins/coreplugin/bwsepiatool.cpp:266
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:264
+msgid "Generic"
msgstr ""
-#: digikam/searchwidgets.cpp:80
-msgid "Image Date"
+#: imageplugins/coreplugin/bwsepiatool.cpp:267
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:265
+msgid "Generic: Simulate a generic black and white film Simulate the Agfa 200X black and white film at 200 ISO"
+"p>"
msgstr ""
-#: digikam/searchwidgets.cpp:83
-msgid "Rating"
+#: imageplugins/coreplugin/bwsepiatool.cpp:276
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:274
+msgid "Agfa Pan 25"
msgstr ""
-#: digikam/searchwidgets.cpp:94 digikam/searchwidgets.cpp:100
-#: digikam/searchwidgets.cpp:104
-msgid "Contains"
+#: imageplugins/coreplugin/bwsepiatool.cpp:277
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:275
+msgid ""
+"Agfa Pan 25: Simulate the Agfa Pan black and white film at 25 ISO"
+"p>"
msgstr ""
-#: digikam/searchwidgets.cpp:95 digikam/searchwidgets.cpp:101
-#: digikam/searchwidgets.cpp:105
-msgid "Does Not Contain"
+#: imageplugins/coreplugin/bwsepiatool.cpp:281
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:279
+msgid "Agfa Pan 100"
msgstr ""
-#: digikam/searchwidgets.cpp:96 digikam/searchwidgets.cpp:98
-#: digikam/searchwidgets.cpp:102 digikam/searchwidgets.cpp:108
-#: digikam/searchwidgets.cpp:111
-msgid "Equals"
+#: imageplugins/coreplugin/bwsepiatool.cpp:282
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:280
+msgid ""
+"Agfa Pan 100: Simulate the Agfa Pan black and white film at 100 "
+"ISO Simulate the Agfa Pan black and white film at 400 "
+"ISO Simulate the Ilford Delta black and white film at "
+"100 ISO Simulate the Ilford Delta black and white film at "
+"400 ISO Simulate the Ilford Delta 400 Pro black "
+"and white film at 3200 ISO Simulate the Ilford FP4 Plus black and white film "
+"at 125 ISO Simulate the Ilford HP5 Plus black and white film "
+"at 400 ISO Simulate the Ilford PanF Plus black and white "
+"film at 50 ISO Simulate the Ilford XP2 Super black and white "
+"film at 400 ISO Simulate the Kodak Tmax black and white film at 100 "
+"ISO To create new tags, you can use the following rules: "
-" Simulate the Kodak Tmax black and white film at 400 "
+"ISO Simulate the Kodak TriX black and white film at 400 "
+"ISO Do not apply a lens filter when rendering the image."
+" Simulate black and white film "
+"exposure using a green filter. This is usefule for all scenic shoots, "
+"especially portraits photographed against the sky. Simulate black and white film "
+"exposure using an orange filter. This will enhance landscapes, marine scenes "
+"and aerial photography. Simulate black and white film "
+"exposure using a red filter. This creates dramatic sky effects, and "
+"simulates moonlight scenes in the daytime. Simulate black and white film "
+"exposure using a yellow filter. This has the most natural tonal correction, "
+"and improves contrast. Ideal for landscapes. Select the histogram time unit here."
-" You can change the graph decade to zoom in or zoom out over time."
+#: imageplugins/coreplugin/bwsepiatool.cpp:389
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:388
+msgid " Here, set the strength adjustment of the lens filter."
msgstr ""
-#: digikam/timelineview.cpp:149
-msgid ""
-" Select the histogram scale here."
-" If the date count's maximal values are small, you can use the linear scale."
-" Logarithmic scale can be used when the maximal values are big; if it is "
-"used, all values (small and large) will be visible on the graph."
+#: imageplugins/coreplugin/bwsepiatool.cpp:401
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:400
+msgid "No Tone Filter"
msgstr ""
-#: digikam/timelineview.cpp:198
-msgid "Clear current selection"
+#: imageplugins/coreplugin/bwsepiatool.cpp:402
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:401
+msgid "No Tone Filter: Do not apply a tone filter to the image. If you press this button, current dates selection from time-line will be "
-"clear."
+#: imageplugins/coreplugin/bwsepiatool.cpp:406
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:405
+msgid "Sepia Tone"
msgstr ""
-#: digikam/timelineview.cpp:203
+#: imageplugins/coreplugin/bwsepiatool.cpp:407
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:406
msgid ""
-" Enter the name of the current dates search to save in the \"My Date "
-"Searches\" view"
+"Black & White with Sepia Tone: Gives a warm highlight and mid-tone "
+"while adding a bit of coolness to the shadows - very similar to the process "
+"of bleaching a print and re-developing in a sepia toner. If you press this button, current dates selection from time-line will be "
-"saved to a new search virtual Album using name set on the left side."
-msgstr ""
-
-#: digikam/searchquickdialog.cpp:75
-msgid "Quick Search"
+"Black & White with Brown Tone: This filter is more neutral than the "
+"Sepia Tone filter. Start subtle and replicates printing "
+"on a cold tone black and white paper such as a bromide enlarging paper. Enter your search criteria to find items in the album library"
+#: imageplugins/coreplugin/bwsepiatool.cpp:426
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:425
+msgid "Selenium Tone"
msgstr ""
-#: digikam/searchquickdialog.cpp:90
+#: imageplugins/coreplugin/bwsepiatool.cpp:427
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:426
msgid ""
-" Here you can see the items found in album library, using the current search "
-"criteria"
+"Black & White with Selenium Tone: This effect replicates "
+"traditional selenium chemical toning done in the darkroom. Enter the name of the current search to save in the \"My Searches\" view"
+"Black & White with Platinum Tone: This effect replicates "
+"traditional platinum chemical toning done in the darkroom. This effect is also known as "
+"Verdante. This is the curve adjustment of the image luminosity"
msgstr ""
-#: digikam/digikamview.cpp:219
-msgid "Searches"
+#: imageplugins/coreplugin/bwsepiatool.cpp:485
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:484
+msgid "Film"
msgstr ""
-#: digikam/digikamview.cpp:1509
-msgid "Preparing slideshow of %1 images. Please wait..."
+#: imageplugins/coreplugin/bwsepiatool.cpp:486
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:485
+msgid "Lens Filters"
msgstr ""
-#: digikam/tagspopupmenu.cpp:183 digikam/tagspopupmenu.cpp:270
-msgid "Add New Tag..."
+#: imageplugins/coreplugin/bwsepiatool.cpp:487
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:486
+msgid "Tone"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:104 utilities/setup/setupeditor.cpp:84
-#: utilities/setup/setupgeneral.cpp:168 utilities/setup/setuplighttable.cpp:74
-msgid "Interface Options"
+#: imageplugins/coreplugin/bwsepiatool.cpp:488
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:487
+msgid "Lightness"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:106 utilities/setup/setupeditor.cpp:86
-msgid "&Use theme background color"
+#: imageplugins/coreplugin/bwsepiatool.cpp:832
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:837
+msgid "Convert to Black && White"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:109 utilities/setup/setupeditor.cpp:88
-msgid ""
-" Enable this option to use background theme color in image editor area"
+#: imageplugins/coreplugin/bwsepiatool.cpp:1068
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:1074
+msgid "Black & White Settings File to Load"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:113 utilities/setup/setupeditor.cpp:93
-msgid "&Background color:"
+#: imageplugins/coreplugin/bwsepiatool.cpp:1081
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:1087
+msgid "\"%1\" is not a Black & White settings text file."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:116
-msgid " Select background color to use for image editor area."
+#: imageplugins/coreplugin/bwsepiatool.cpp:1133
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:1138
+msgid "Cannot load settings from the Black & White text file."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:119 utilities/setup/setupeditor.cpp:100
-#: utilities/setup/setuplighttable.cpp:92
-msgid "H&ide toolbar in fullscreen mode"
+#: imageplugins/coreplugin/bwsepiatool.cpp:1144
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:1149
+msgid "Black & White Settings File to Save"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:120
-msgid "Hide &thumbbar in fullscreen mode"
+#: imageplugins/coreplugin/bwsepiatool.cpp:1172
+#: imageplugins/coreplugin/imageeffect_bwsepia.cpp:1176
+msgid "Cannot save settings to the Black & White text file."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:121
-msgid "Use &horizontal thumbbar (need to restart showFoto)"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:82
+msgid "Hue / Saturation / Lightness"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:122
+#: imageplugins/coreplugin/hsl/hsltool.cpp:92
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:78
msgid ""
-" If this option is enabled, the thumbnails bar will be displayed horizontally "
-"behind the image area. You need to restart showFoto for this option take "
-"effect."
-" "
+" Here you can see the image Hue/Saturation/Lightness adjustments preview. "
+"You can pick color on image to see the color level corresponding on "
+"histogram."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:124
-msgid "&Deleting items should move them to trash"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:169
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:152
+msgid " Select the hue and saturation adjustments of the image here."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:125 utilities/setup/setupmisc.cpp:82
-msgid "&Show splash screen at startup"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:174
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:157
+msgid ""
+" You can see here a color preview of the hue and saturation adjustments."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:127 utilities/setup/setupeditor.cpp:102
-msgid "Use Raw Import Tool to handle Raw image"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:179
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:162
+msgid "Hue:"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:128 utilities/setup/setupeditor.cpp:103
-msgid ""
-" Set on this option to use Raw Import tool before to load a Raw image, to "
-"customize indeep decoding settings."
+#: imageplugins/coreplugin/hsl/hsltool.cpp:184
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:167
+msgid " Set here the hue adjustment of the image."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:134 utilities/setup/setupeditor.cpp:109
-msgid "Exposure Indicators"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:188
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:171
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:257
+#: imageplugins/whitebalance/whitebalancetool.cpp:258
+#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:299
+msgid "Saturation:"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:137 utilities/setup/setupeditor.cpp:112
-msgid "&Under-exposure color:"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:193
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:176
+msgid " Set here the saturation adjustment of the image."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:140
-msgid ""
-" Customize color used in image editor to identify under-exposed pixels."
+#: imageplugins/coreplugin/hsl/hsltool.cpp:197
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:180
+msgid "Lightness:"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:144 utilities/setup/setupeditor.cpp:119
-msgid "&Over-exposure color:"
+#: imageplugins/coreplugin/hsl/hsltool.cpp:202
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:185
+msgid " Set here the lightness adjustment of the image."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:147
-msgid ""
-" Customize color used in image editor to identify over-exposed pixels."
+#: imageplugins/coreplugin/hsl/hsltool.cpp:448
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:422
+msgid "HSL Adjustments"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:152 utilities/setup/setupmetadata.cpp:96
-msgid "EXIF Actions"
+#: imageplugins/coreplugin/hsl/imageeffect_hsl.cpp:72
+msgid "Hue/Saturation/Lightness"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:155 utilities/setup/setupmetadata.cpp:99
-msgid "Show images/thumbs &rotated according to orientation tag"
+#: imageplugins/coreplugin/iccprooftool.cpp:103
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:93
+#: showfoto/setup/setup.cpp:106 utilities/setup/setup.cpp:182
+msgid "Color Management"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:158 utilities/setup/setupmetadata.cpp:102
-msgid "Set orientation tag to normal after rotate/flip"
+#: imageplugins/coreplugin/iccprooftool.cpp:116
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:108
+msgid ""
+" Here you can see the image preview after applying a color profile Select the histogram channel to display here: Luminosity: "
+"display the image's luminosity values. Red: display the red channel "
+"values. Green: display the green channel values. Blue: "
+"display the blue channel values. "
msgstr ""
-#: showfoto/setup/setupeditor.cpp:167
-msgid "File Date"
+#: imageplugins/coreplugin/iccprooftool.cpp:147
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:134
+#: libs/imageproperties/imagepropertiescolorstab.cpp:190
+msgid ""
+" Select the histogram scale here. If the image's maximal values are "
+"small, you can use the linear scale. Logarithmic scale can be used when "
+"the maximal values are big; if it is used, all values (small and large) will "
+"be visible on the graph."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:168
-msgid "File Name"
+#: imageplugins/coreplugin/iccprooftool.cpp:181
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:168
+msgid ""
+" Here you can see the target preview image histogram of the selected image "
+"channel. This one is updated after setting changes."
msgstr ""
-#: showfoto/setup/setupeditor.cpp:169
-msgid "File size"
+#: imageplugins/coreplugin/iccprooftool.cpp:204
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:191
+#: showfoto/setup/setup.cpp:94
+msgid "General Settings"
msgstr ""
-#: showfoto/setup/setupeditor.cpp:170
-msgid ""
-" Here, select whether newly-loaded images are sorted by file-date, file-name, "
-"or file-size."
+#: imageplugins/coreplugin/iccprooftool.cpp:205
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:192
+msgid " Here you can set general parameters. If this option is enabled, newly-loaded images will be sorted in descending "
-"order."
+" Rendering emulation of the device described by the \"Proofing\" profile. "
+"Useful to preview the final result without rendering to physical medium. You can use this option if you want to show the colors that are outside "
+"the printer's gamut "
msgstr ""
-#: showfoto/setup/setup.cpp:98
-msgid "Thumbbar Items Tool Tip Settings"
+#: imageplugins/coreplugin/iccprooftool.cpp:222
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:209
+msgid "Assign profile"
msgstr ""
-#: showfoto/setup/setup.cpp:102 utilities/setup/setup.cpp:178
-msgid "RAW decoding"
+#: imageplugins/coreplugin/iccprooftool.cpp:223
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:210
+msgid ""
+" You can use this option to embed the selected workspace color profile "
+"into the image. The Black Point Compensation (BPC) feature does work in conjunction with "
+"Relative Colorimetric Intent. Perceptual intent should make no difference, "
+"since BPC is always on, and in Absolute Colorimetric Intent it is always "
+"turned off. BPC does compensate for a lack of ICC profiles in the dark "
+"tone rendering. With BPC the dark tones are optimally mapped (no clipping) "
+"from original media to the destination rendering media, e.g. the combination "
+"of paper and ink. Set here all parameters relevant of Input Color Profiles. Set this option to display image information when the mouse hovers over a "
-"thumbbar item."
+#: imageplugins/coreplugin/iccprooftool.cpp:303
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:289
+msgid "Use builtin sRGB profile"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:106 utilities/setup/setuptooltip.cpp:117
-msgid "File/Image Information"
+#: imageplugins/coreplugin/iccprooftool.cpp:307
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:293
+msgid "Use default profile"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:108 utilities/setup/setuptooltip.cpp:119
-msgid "Show file name"
+#: imageplugins/coreplugin/iccprooftool.cpp:310
+#: imageplugins/coreplugin/iccprooftool.cpp:353
+#: imageplugins/coreplugin/iccprooftool.cpp:387
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:296
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:339
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:374
+msgid "Use selected profile"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:109 utilities/setup/setuptooltip.cpp:120
-msgid " Set this option to display the image file name."
+#: imageplugins/coreplugin/iccprooftool.cpp:314
+#: imageplugins/coreplugin/iccprooftool.cpp:357
+#: imageplugins/coreplugin/iccprooftool.cpp:391
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:300
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:343
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:378
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:435
+msgid "ICC Files (*.icc; *.icm)"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:111 utilities/setup/setuptooltip.cpp:122
-msgid "Show file date"
+#: imageplugins/coreplugin/iccprooftool.cpp:319
+#: imageplugins/coreplugin/iccprooftool.cpp:362
+#: imageplugins/coreplugin/iccprooftool.cpp:396
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:305
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:348
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:383
+#: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:83
+#: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:86
+#: utilities/setup/setupicc.cpp:232 utilities/setup/setupicc.cpp:250
+#: utilities/setup/setupicc.cpp:266 utilities/setup/setupicc.cpp:283
+msgid "Info..."
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:112 utilities/setup/setuptooltip.cpp:123
-msgid " Set this option to display the image file date."
+#: imageplugins/coreplugin/iccprooftool.cpp:321
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:307
+msgid "Camera information"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:114 utilities/setup/setuptooltip.cpp:125
-msgid "Show file size"
+#: imageplugins/coreplugin/iccprooftool.cpp:322
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:308
+#: libs/dialogs/imagedialog.cpp:198
+msgid "Make:"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:115 utilities/setup/setuptooltip.cpp:126
-msgid " Set this option to display the image file size."
+#: imageplugins/coreplugin/iccprooftool.cpp:324
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:310
+#: libs/dialogs/imagedialog.cpp:199
+msgid "Model:"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:117 utilities/setup/setuptooltip.cpp:128
-msgid "Show image type"
+#: imageplugins/coreplugin/iccprooftool.cpp:339
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:325
+msgid "Workspace Profile"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:118 utilities/setup/setuptooltip.cpp:129
-msgid " Set this option to display the image type."
+#: imageplugins/coreplugin/iccprooftool.cpp:340
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:326
+msgid " Set here all parameters relevant to Color Workspace Profiles. Set this option to display the image dimensions in pixels."
+#: imageplugins/coreplugin/iccprooftool.cpp:373
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:359
+msgid "Proofing Profile"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:129 utilities/setup/setuptooltip.cpp:140
-msgid "Show camera make and model"
+#: imageplugins/coreplugin/iccprooftool.cpp:374
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:360
+msgid " Set here all parameters relevant to Proofing Color Profiles. Set this option to display the make and model of the camera with which the "
-"image has been taken."
+#: imageplugins/coreplugin/iccprooftool.cpp:384
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:371
+msgid "Use default proof profile"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:133 utilities/setup/setuptooltip.cpp:144
-msgid "Show camera date"
+#: imageplugins/coreplugin/iccprooftool.cpp:407
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:394
+msgid "Lightness Adjustments"
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:134 utilities/setup/setuptooltip.cpp:145
-msgid " Set this option to display the date when the image was taken."
+#: imageplugins/coreplugin/iccprooftool.cpp:408
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:395
+msgid " Set here all lightness adjustments to the target image. Please fix "
+"this in the digiKam ICC setup."
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:137 utilities/setup/setuptooltip.cpp:148
+#: imageplugins/coreplugin/iccprooftool.cpp:758
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:741
msgid ""
-" Set this option to display the camera aperture and focal settings used to "
-"take the image."
+" The selected ICC input profile path seems to be invalid. Please check "
+"it."
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:140 utilities/setup/setuptooltip.cpp:151
-msgid "Show camera exposure and sensitivity"
+#: imageplugins/coreplugin/iccprooftool.cpp:777
+#: imageplugins/coreplugin/iccprooftool.cpp:939
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:759
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:918
+msgid ""
+" The selected ICC proof profile path seems to be invalid. Please check "
+"it."
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:141 utilities/setup/setuptooltip.cpp:152
+#: imageplugins/coreplugin/iccprooftool.cpp:799
+#: imageplugins/coreplugin/iccprooftool.cpp:961
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:780
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:939
msgid ""
-" Set this option to display the camera exposure and sensitivity used to take "
-"the image."
+" Selected ICC workspace profile path seems to be invalid. Please check "
+"it."
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:144 utilities/setup/setuptooltip.cpp:155
-msgid "Show camera mode and program"
+#: imageplugins/coreplugin/iccprooftool.cpp:837
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:818
+msgid ""
+" Your settings are not sufficient. To apply a color transform, you "
+"need at least two ICC profiles: If you want to do a \"soft-proof\" "
+"transform, in addition to these profiles you need a \"Proof\" profile. Set this option to display the camera mode and program used to take the "
-"image."
+" Selected ICC input profile path seems to be invalid. Please check it."
msgstr ""
-#: showfoto/setup/setuptooltip.cpp:148 utilities/setup/setuptooltip.cpp:159
-msgid "Show camera flash settings"
+#: imageplugins/coreplugin/iccprooftool.cpp:1049
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:1029
+msgid " You have selected the \"Default builtin sRGB profile\" Set this option to display the camera flash settings used to take the image."
+" This profile is built on the fly, so there is no relevant information "
+"about it. Set this option to display the camera white balance settings used to take "
-"the image."
+#: imageplugins/coreplugin/iccprooftool.cpp:1094
+#: imageplugins/coreplugin/iccprooftool.cpp:1108
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:1072
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:1084
+#: utilities/setup/setupicc.cpp:691
+msgid "Profile Error"
msgstr ""
-#: showfoto/main.cpp:47
-msgid "File(s) or folder(s) to open"
+#: imageplugins/coreplugin/iccprooftool.cpp:1107
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:1084
+msgid "Sorry, it seems there is no embedded profile"
msgstr ""
-#: showfoto/main.cpp:58
-msgid "showFoto"
+#: imageplugins/coreplugin/iccprooftool.cpp:1120
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:1096
+msgid ""
+" You have not enabled Color Management in the digiKam preferences. \"Use of default profile\" options will be disabled now. The ICC profile path seems to be invalid. If you want to set it now, select \"Yes\", otherwise select \"No\". In this "
-"case, \"Color Management\" feature will be disabled until you solve this "
-"issue Here you can see the image selection preview with red eye reduction "
+"applied."
msgstr ""
-#: showfoto/showfoto.cpp:904
-msgid "There are no images in this folder."
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:95
+#: imageplugins/coreplugin/redeyetool.cpp:110
+msgid ""
+" Select the histogram channel to display here: Luminosity: "
+"display the image's luminosity values. Red: display the red image "
+"channel values. Green: display the green image channel values."
+" Blue: display the blue image channel values. "
msgstr ""
-#: showfoto/showfoto.cpp:926
-msgid "Open Images From Folder"
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:105
+#: imageplugins/coreplugin/redeyetool.cpp:120
+msgid ""
+" Select the histogram scale here. If the image's maximum counts are "
+"small, you can use the linear scale. The logarithmic scale can be used "
+"when the maximal counts are big to show all values (small and large) on the "
+"graph."
msgstr ""
-#: showfoto/showfoto.cpp:1104
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:136
+#: imageplugins/coreplugin/redeyetool.cpp:151
msgid ""
-"About to delete file \"%1\"\n"
-"Are you sure?"
+" Here you can see the target preview image histogram of the selected image "
+"channel. It is updated upon setting changes."
msgstr ""
-#: showfoto/showfoto.cpp:1205
-#: utilities/imageeditor/editor/imagewindow.cpp:1065
-#: utilities/imageeditor/editor/imagewindow.cpp:1095
-#: utilities/lighttable/lighttablewindow.cpp:1290
-msgid "Preparing slideshow. Please wait..."
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:146
+#: imageplugins/coreplugin/redeyetool.cpp:161 libs/dialogs/imagedialog.cpp:204
+msgid "Sensitivity:"
msgstr ""
-#: _translatorinfo.cpp:1
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:150
+#: imageplugins/coreplugin/redeyetool.cpp:165
msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
+" Sets the red color pixels selection threshold. Low values will select "
+"more red color pixels (agressive correction), high values less (mild "
+"correction). Use low value if eye have been selected exactly. Use high value "
+"if other parts of the face are also selected."
msgstr ""
-#: _translatorinfo.cpp:3
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:159
+#: imageplugins/coreplugin/redeyetool.cpp:174
msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr ""
-
-#: tdeioslave/digikamthumbnail.cpp:125
-msgid "No or invalid size specified"
+" Sets the smoothness value when blurring the border of the changed pixels. "
+"This leads to a more naturally looking pupil."
msgstr ""
-#: tdeioslave/digikamthumbnail.cpp:143
-msgid "File does not exist"
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:163
+#: imageplugins/coreplugin/redeyetool.cpp:178
+msgid "Coloring Tint:"
msgstr ""
-#: tdeioslave/digikamthumbnail.cpp:181
-#, c-format
-msgid "Cannot create thumbnail for %1"
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:168
+#: imageplugins/coreplugin/redeyetool.cpp:183
+msgid " Sets a custom color to re-colorize the eyes."
msgstr ""
-#: tdeioslave/digikamalbums.cpp:486 tdeioslave/digikamalbums.cpp:942
-#: tdeioslave/digikamalbums.cpp:952 tdeioslave/digikamalbums.cpp:1212
-#: tdeioslave/digikamalbums.cpp:1240
-msgid "Source album %1 not found in database"
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:170
+#: imageplugins/coreplugin/redeyetool.cpp:185
+msgid "Tint Level:"
msgstr ""
-#: tdeioslave/digikamalbums.cpp:580 tdeioslave/digikamalbums.cpp:836
-#, c-format
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:174
+#: imageplugins/coreplugin/redeyetool.cpp:189
msgid ""
-"Could not change permissions for\n"
-"%1"
+" Set the tint level to adjust the luminosity of the new color of the pupil."
msgstr ""
-#: tdeioslave/digikamalbums.cpp:880
-msgid ""
-"Source and Destination have different Album Library Paths.\n"
-"Source: %1\n"
-"Destination: %2"
+#: imageplugins/coreplugin/imageeffect_redeye.cpp:389
+#: imageplugins/coreplugin/redeyetool.cpp:403
+msgid "Red Eyes Correction"
msgstr ""
-#: tdeioslave/digikamalbums.cpp:960
-msgid "Destination album %1 not found in database"
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:70
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:413
+#: imageplugins/coreplugin/rgbtool.cpp:80
+#: imageplugins/coreplugin/rgbtool.cpp:435
+msgid "Color Balance"
msgstr ""
-#: tdeioslave/digikamalbums.cpp:979
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:76
+#: imageplugins/coreplugin/rgbtool.cpp:86
msgid ""
-"This file/folder is on a different filesystem through symlinks. Moving/Renaming "
-"files between them is currently unsupported "
+" Here you can see the image color-balance adjustments preview. You can "
+"pick color on image to see the color level corresponding on histogram."
msgstr ""
-#: tdeioslave/digikamalbums.cpp:1765
-msgid "Source image %1 not found in database"
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:149
+#: imageplugins/coreplugin/rgbtool.cpp:162
+msgid "Cyan"
msgstr ""
-#: themedesigner/main.cpp:46
-msgid "Document to open."
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:154
+#: imageplugins/coreplugin/rgbtool.cpp:167
+msgid " Set here the cyan/red color adjustment of the image."
msgstr ""
-#: themedesigner/main.cpp:53 themedesigner/mainwindow.cpp:69
-msgid "digiKam Theme Designer"
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:166
+#: imageplugins/coreplugin/rgbtool.cpp:181
+msgid "Magenta"
msgstr ""
-#: themedesigner/themediconitem.cpp:153
-msgid "Photo caption"
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:171
+#: imageplugins/coreplugin/rgbtool.cpp:186
+msgid " Set here the magenta/green color adjustment of the image."
msgstr ""
-#: themedesigner/themediconitem.cpp:170
-msgid "Events, Places, Vacation"
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:183
+#: imageplugins/coreplugin/rgbtool.cpp:200
+msgid "Yellow"
msgstr ""
-#: themedesigner/themedicongroupitem.cpp:79
-msgid "Album Banner"
+#: imageplugins/coreplugin/imageeffect_rgb.cpp:188
+#: imageplugins/coreplugin/rgbtool.cpp:205
+msgid " Set here the yellow/blue color adjustment of the image."
msgstr ""
-#: themedesigner/themedicongroupitem.cpp:93
-msgid "July 2007 - 10 Items"
+#: imageplugins/coreplugin/imageplugin_core.cpp:68
+msgid "Blur..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 49
-#: rc.cpp:3
-#, no-c-format
-msgid "Icon Placeholder, not in GUI"
+#: imageplugins/coreplugin/imageplugin_core.cpp:72
+msgid "Sharpen..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 65
-#: rc.cpp:6
-#, no-c-format
-msgid "Deletion method placeholder, never shown to user."
+#: imageplugins/coreplugin/imageplugin_core.cpp:76
+msgid "Red Eye..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 83
-#: rc.cpp:9
-#, no-c-format
-msgid "List of files that are about to be deleted."
+#: imageplugins/coreplugin/imageplugin_core.cpp:79
+msgid ""
+"This filter can be used to correct red eyes in a photo. Select a region "
+"including the eyes to use this option."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 86
-#: rc.cpp:12
-#, no-c-format
-msgid "This is the list of items that are about to be deleted."
+#: imageplugins/coreplugin/imageplugin_core.cpp:82
+msgid "Brightness/Contrast/Gamma..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 94
-#: rc.cpp:15
-#, no-c-format
-msgid "Placeholder for number of files, not in GUI"
+#: imageplugins/coreplugin/imageplugin_core.cpp:86
+msgid "Hue/Saturation/Lightness..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 109
-#: rc.cpp:18
-#, no-c-format
-msgid "&Delete files instead of moving them to the trash"
+#: imageplugins/coreplugin/imageplugin_core.cpp:91
+msgid "Color Balance..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 112
-#: rc.cpp:21
-#, no-c-format
-msgid ""
-"If checked, files will be permanently removed instead of being placed in the "
-"Trash Bin"
+#: imageplugins/coreplugin/imageplugin_core.cpp:96
+msgid "Auto-Correction..."
msgstr ""
-#. i18n: file ./libs/dialogs/deletedialogbase.ui line 117
-#: rc.cpp:24
-#, no-c-format
-msgid ""
-" If this box is checked, files will be permanently removed "
-"instead of being placed in the Trash Bin. Use this option with caution: most filesystems are unable to "
-"undelete deleted files reliably. If this box is checked, this dialog will no longer be shown, and files will "
-"be directly moved to the Trash Bin Set selection area to the maximum size according to the current ratio."
msgstr ""
-#. i18n: file ./showfoto/showfotoui.rc line 72
-#: rc.cpp:92 rc.cpp:161 rc.cpp:167 rc.cpp:191 rc.cpp:239 rc.cpp:299
-#, no-c-format
-msgid "&Decorate"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:71
+msgid "&Max. Aspect"
msgstr ""
-#. i18n: file ./showfoto/showfotoui.rc line 75
-#: rc.cpp:95 rc.cpp:131 rc.cpp:149 rc.cpp:179 rc.cpp:185 rc.cpp:197 rc.cpp:215
-#: rc.cpp:221 rc.cpp:227 rc.cpp:257 rc.cpp:302
-#, no-c-format
-msgid "F&ilters"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:81
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:86
+msgid ""
+" Here you can see the aspect ratio selection preview used for cropping. "
+"You can use the mouse to move and resize the crop area. Press and hold the "
+"CTRL key to move the opposite corner too. Press and hold the SHIFT key to "
+"move the closest corner to the mouse pointer."
msgstr ""
-#. i18n: file ./imageplugins/coreplugin/digikamimageplugin_core_ui.rc line 18
-#: rc.cpp:248
-#, no-c-format
-msgid "&Depth"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:101
+msgid "Aspect ratio:"
msgstr ""
-#: imageplugins/noisereduction/imageplugin_noisereduction.cpp:48
-msgid "Noise Reduction..."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:104
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:129
+msgid ""
+" Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool "
+"uses a relative ratio. That means it is the same if you use centimeters or "
+"inches and it doesn't specify the physical size. You can see below a "
+"correspondence list of traditional photographic paper sizes and aspect ratio "
+"crop: 2:3: 10x15cm, 20x30cm, 30x45cm, 4x6\", 8x12\", 12x18\", "
+"16x24\", 20x30\" 3:4: 6x8cm, 15x20cm, 18x24cm, 30x40cm, 3.75x5\", "
+"4.5x6\", 6x8\", 7.5x10\", 9x12\" 4:5: 20x25cm, 40x50cm, 8x10\", "
+"16x20\" 5:7: 15x21cm, 30x42cm, 5x7\" 7:10: 21x30cm, "
+"42x60cm, 3.5x5\" The Golden Ratio is 1:1.618. A composition "
+"following this rule is considered visually harmonious but can be unadapted "
+"to print on standard photographic paper."
+msgstr ""
+
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:121
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:146
+msgid "Exact"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:75
-#: imageplugins/noisereduction/noisereductiontool.cpp:460
-msgid "Noise Reduction"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:122
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:147
+msgid " Enable this option to force exact aspect ratio crop."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:117
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:138
-#: imageplugins/noisereduction/noisereductiontool.cpp:94
-msgid "Radius:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:124
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:149
+msgid "Orientation:"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:100
-msgid ""
-" Radius: this control selects the gliding window size used for the "
-"filter. Larger values do not increase the amount of time needed to filter each "
-"pixel in the image but can cause blurring. This window moves across the image, "
-"and the color in it is smoothed to remove imperfections. In any case it must be "
-"about the same size as the noise granularity or somewhat more. If it is set "
-"higher than necessary, then it can cause unwanted blur."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:126
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:151
+msgid "Landscape"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:153
-#: imageplugins/noisereduction/noisereductiontool.cpp:111
-msgid "Threshold:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:127
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:152
+msgid "Portrait"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:117
-msgid ""
-" Threshold: use the slider for coarse adjustment, and the spin control "
-"for fine adjustment to control edge detection sensitivity. This value should be "
-"set so that edges and details are clearly visible and noise is smoothed out. "
-"Adjustment must be made carefully, because the gap between \"noisy\", "
-"\"smooth\", and \"blur\" is very small. Adjust it as carefully as you would "
-"adjust the focus of a camera."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:128
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:154
+msgid " Select constrained aspect ratio orientation."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:127
-msgid "Texture:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:130
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:156
+msgid "Auto"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:133
-msgid ""
-" Texture: this control sets the texture accuracy. This value can be "
-"used, to get more or less texture accuracy. When decreased, then noise and "
-"texture are blurred out, when increased then texture is amplified, but also "
-"noise will increase. It has almost no effect on image edges."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:131
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:157
+msgid " Enable this option to automatically set the orientation."
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:117
-#: imageplugins/noisereduction/noisereductiontool.cpp:140
-msgid "Sharpness:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:142
+msgid "Custom ratio:"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:146
-msgid ""
-" Sharpness: This value improves the frequency response for the filter. "
-"When it is too strong then not all noise can be removed, or spike noise may "
-"appear. Set it near to maximum, if you want to remove very weak noise or "
-"JPEG-artifacts, without losing detail."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:145
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:166
+msgid " Set here the desired custom aspect numerator value."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:154
-msgid "Edge Lookahead:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:149
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:173
+msgid " Set here the desired custom aspect denominator value."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:160
-msgid ""
-" Edge: This value defines the pixel distance to which the filter looks "
-"ahead for edges. When this value is increased, then spike noise is erased. You "
-"can eventually re-adjust the Edge filter, when you have changed this "
-"setting. When this value is too high, the adaptive filter can no longer "
-"accurately track image details, and noise or blurring can occur."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:159
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:184
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:181
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:203
+msgid " Set here the top left selection corner position for cropping."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:169
-msgid "Erosion:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:160
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:178
+msgid "X:"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:175
-msgid ""
-" Erosion: Use this to increase edge noise erosion and spike noise "
-"erosion (noise is removed by erosion)."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:164
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:184
+#: utilities/imageeditor/tools/imageresize.cpp:180
+msgid "Width:"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:196
-msgid "Details"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:165
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:189
+msgid " Set here the width selection for cropping."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:203
-msgid "Luminance:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:174
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:195
+msgid " Set width position to center."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:209
-msgid ""
-" Luminance: this control sets the luminance tolerance of the image.We "
-"recommend using either the Color or the Luminance "
-"tolerance settings to make an image correction, not both at the same time. "
-"These settings do not influence the main smoothing process controlled by the "
-"Details settings."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:183
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:200
+msgid "Y:"
msgstr ""
-#: imageplugins/inserttext/inserttexttool.cpp:153
-#: imageplugins/noisereduction/noisereductiontool.cpp:217
-msgid "Color:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:188
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:206
+#: utilities/imageeditor/tools/imageresize.cpp:187
+msgid "Height:"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:223
-msgid ""
-" Color: this control sets the color tolerance of the image. It is "
-"recommended using either the Color or the Luminance "
-"tolerance to make image correction, not both at the same time. These settings "
-"do not influence the main smoothing process controlled by the Details "
-"settings."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:189
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:211
+msgid " Set here the height selection for cropping."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:149
-#: imageplugins/coreplugin/bcgtool.cpp:172
-#: imageplugins/noisereduction/noisereductiontool.cpp:231
-#: imageplugins/whitebalance/whitebalancetool.cpp:265
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:292
-msgid "Gamma:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:198
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:217
+msgid " Set height position to center."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:237
-msgid ""
-" Gamma: this control sets the gamma tolerance of the image. This value "
-"can be used to increase the tolerance values for darker areas (which commonly "
-"are noisier). This results in more blur for shadow areas."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:212
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:244
+msgid "Composition guide:"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:243
-msgid "Damping:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:214
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:246
+msgid "Rules of Thirds"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:249
-msgid ""
-" Damping: this control sets the phase-jitter damping adjustment. This "
-"value defines how fast the adaptive filter-radius reacts to luminance "
-"variations. If increased, then edges appear smoother; if too high, then blur "
-"may occur. If at minimum, then noise and phase jitter at the edges can occur. "
-"It can suppress spike noise when increased, and this is the preferred method to "
-"remove it."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:215
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:248
+msgid "Harmonious Triangles"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:269
-msgid "Advanced"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:216
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:249
+msgid "Golden Mean"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:467
-msgid "Photograph Noise Reduction Settings File to Load"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:219
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:252
+msgid ""
+" With this option, you can display guide lines which help you to compose "
+"your photograph."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:479
-msgid "\"%1\" is not a Photograph Noise Reduction settings text file."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:222
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:255
+msgid "Golden sections"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:499
-msgid "Cannot load settings from the Photograph Noise Reduction text file."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:223
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:256
+msgid " Enable this option to show golden sections."
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:508
-msgid "Photograph Noise Reduction Settings File to Save"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:225
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:258
+msgid "Golden spiral sections"
msgstr ""
-#: imageplugins/noisereduction/noisereductiontool.cpp:531
-msgid "Cannot save settings to the Photograph Noise Reduction text file."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:226
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:259
+msgid " Enable this option to show golden spiral sections."
msgstr ""
-#: imageplugins/channelmixer/imageplugin_channelmixer.cpp:48
-msgid "Channel Mixer..."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:228
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:261
+msgid "Golden spiral"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:100
-#: imageplugins/channelmixer/channelmixertool.cpp:474
-msgid "Channel Mixer"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:229
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:262
+msgid " Enable this option to show golden spiral guide."
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:106
-msgid ""
-" You can see here the image's color channels' gains adjustments preview. You "
-"can pick color on image to see the color level corresponding on histogram."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:231
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:264
+msgid "Golden triangles"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:127
-msgid ""
-" Select the color channel to mix here:"
-" Red: display the red image-channel values."
-" Green: display the green image-channel values."
-" Blue: display the blue image-channel values."
-" "
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:232
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:265
+msgid " Enable this option to show golden triangles."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:139
-#: imageplugins/channelmixer/channelmixertool.cpp:136
-#: imageplugins/colorfx/colorfxtool.cpp:120
-#: imageplugins/coreplugin/autocorrectiontool.cpp:120
-#: imageplugins/coreplugin/bcgtool.cpp:119
-#: imageplugins/coreplugin/bwsepiatool.cpp:210
-#: imageplugins/coreplugin/hsl/hsltool.cpp:123
-#: imageplugins/coreplugin/rgbtool.cpp:117
-#: imageplugins/whitebalance/whitebalancetool.cpp:138
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:192
-msgid ""
-" Select the histogram scale here."
-" If the image's maximal counts are small, you can use the linear scale."
-" Logarithmic scale can be used when the maximal counts are big; if it is "
-"used, all values (small and large) will be visible on the graph."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:234
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:267
+msgid "Flip horizontally"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:167
-msgid ""
-" Here you can see the target preview image histogram drawing of the selected "
-"image channel. This one is re-computed at any mixer settings changes."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:235
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:268
+msgid " Enable this option to flip horizontally guidelines."
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:177
-msgid "Red:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:237
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:270
+msgid "Flip vertically"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:182
-msgid " Select the red color gain in percent for the current channel here."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:238
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:271
+msgid " Enable this option to flip vertically guidelines."
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:184
-msgid "Blue:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:240
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:273
+msgid "Color and width:"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:189
-msgid " Select the green color gain in percent for the current channel here."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:243
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:278
+msgid " Set here the color used to draw composition guides."
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:191
-#: imageplugins/whitebalance/whitebalancetool.cpp:272
-msgid "Green:"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:244
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:279
+msgid " Set here the width in pixels used to draw composition guides."
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:196
-msgid " Select the blue color gain in percent for the current channel here."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:525
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:565
+msgid "Custom"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:270
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:292
-#: imageplugins/channelmixer/channelmixertool.cpp:198
-msgid "&Reset"
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:543
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:583
+msgid "Golden Ratio"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:199
-msgid ""
-"Reset color channels' gains settings from the currently selected channel."
+#: imageplugins/coreplugin/ratiocrop/imageeffect_ratiocrop.cpp:792
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:78
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:847
+msgid "Aspect Ratio Crop"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:203
-msgid "Monochrome"
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:110
+msgid "Max. Aspect"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:204
-msgid ""
-" Enable this option if you want the image rendered in monochrome mode. In "
-"this mode, the histogram will display only luminosity values."
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:125
+msgid "Ratio:"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:207
-msgid "Preserve luminosity"
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:161
+msgid "Custom:"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:208
-msgid " Enable this option is you want preserve the image luminosity."
+#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:247
+msgid "Diagonal Method"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:623
-msgid "Select Gimp Gains Mixer File to Load"
+#: imageplugins/coreplugin/redeyetool.cpp:83
+msgid "Red Eye"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:695
-msgid "Cannot load settings from the Gains Mixer text file."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:66
+msgid "Sharpening Photograph"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:707
-msgid "Gimp Gains Mixer File to Save"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:76
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:93
+msgid "Method:"
msgstr ""
-#: imageplugins/channelmixer/channelmixertool.cpp:769
-msgid "Cannot save settings to the Gains Mixer text file."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:79
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:96
+msgid "Simple sharp"
msgstr ""
-#: imageplugins/colorfx/imageplugin_colorfx.cpp:50
-msgid "Color Effects..."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:80
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:97
+msgid "Unsharp mask"
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:83
-msgid "Color Effects"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:81
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:624
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:98
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:669
+msgid "Refocus"
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:91
-msgid " This is the color effects preview"
-msgstr ""
-
-#: imageplugins/colorfx/colorfxtool.cpp:110
-#: imageplugins/coreplugin/autocorrectiontool.cpp:110
-#: imageplugins/coreplugin/bcgtool.cpp:109
-#: imageplugins/coreplugin/bwsepiatool.cpp:200
-#: imageplugins/coreplugin/hsl/hsltool.cpp:113
-#: imageplugins/coreplugin/rgbtool.cpp:107
-#: imageplugins/whitebalance/whitebalancetool.cpp:128
-msgid ""
-" Select the histogram channel to display here:"
-" Luminosity: display the image's luminosity values."
-" Red: display the red image-channel values."
-" Green: display the green image-channel values."
-" Blue: display the blue image-channel values."
-" "
-msgstr ""
-
-#: imageplugins/colorfx/colorfxtool.cpp:151
-#: imageplugins/coreplugin/autocorrectiontool.cpp:151
-#: imageplugins/coreplugin/bcgtool.cpp:150
-#: imageplugins/coreplugin/bwsepiatool.cpp:243
-#: imageplugins/coreplugin/hsl/hsltool.cpp:156
-#: imageplugins/coreplugin/rgbtool.cpp:150
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:229
-msgid ""
-" Here you can see the target preview image histogram drawing of the selected "
-"image channel. This one is re-computed at any settings changes."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:82
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:100
+msgid " Select the sharpening method to apply to the image."
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:164
-msgid "Solarize"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:96
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:117
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:148
+#: imageplugins/noisereduction/noisereductiontool.cpp:140
+msgid "Sharpness:"
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:165
-#: imageplugins/colorfx/colorfxtool.cpp:408
-msgid "Vivid"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:100
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:121
+msgid ""
+" A sharpness of 0 has no effect, 1 and above determine the sharpen matrix "
+"radius that determines how much to sharpen the image."
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:166
-#: imageplugins/colorfx/colorfxtool.cpp:412
-msgid "Neon"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:117
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:142
+msgid ""
+" Radius value is the gaussian blur matrix radius value used to determines "
+"how much to blur the image."
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:167
-#: imageplugins/colorfx/colorfxtool.cpp:416
-msgid "Find Edges"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:120
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:145
+msgid "Amount:"
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:169
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:124
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:150
msgid ""
-" Select the effect type to apply to the image here."
-" Solarize: simulates solarization of photograph."
-" Vivid: simulates the Velvia(tm) slide film colors."
-" Neon: coloring the edges in a photograph to reproduce a fluorescent "
-"light effect."
-" Find Edges: detects the edges in a photograph and their strength."
+" The value of the difference between the original and the blur image that "
+"is added back into the original."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:124
-#: imageplugins/colorfx/colorfxtool.cpp:178
-#: imageplugins/distortionfx/distortionfxtool.cpp:140
-msgid "Level:"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:127
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:153
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:115
+#: imageplugins/noisereduction/noisereductiontool.cpp:111
+msgid "Threshold:"
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:182
-#: imageplugins/distortionfx/distortionfxtool.cpp:144
-msgid " Set here the level of the effect."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:131
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:158
+msgid ""
+" The threshold, as a fraction of the maximum luminosity value, needed to "
+"apply the difference amount."
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:184
-#: imageplugins/distortionfx/distortionfxtool.cpp:147
-msgid "Iteration:"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:148
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:178
+msgid "Circular sharpness:"
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:188
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:152
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:183
msgid ""
-" This value controls the number of iterations to use with the Neon and Find "
-"Edges effects."
+" This is the radius of the circular convolution. It is the most important "
+"parameter for using this plugin. For most images the default value of 1.0 "
+"should give good results. Select a higher value when your image is very "
+"blurred."
msgstr ""
-#: imageplugins/colorfx/colorfxtool.cpp:404
-msgid "ColorFX"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:156
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:187
+msgid "Correlation:"
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:76
-msgid "Hot Pixels"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:160
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:192
+msgid ""
+" Increasing the correlation may help to reduce artifacts. The correlation "
+"can range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 "
+"and 0.99. Using a high value for the correlation will reduce the sharpening "
+"effect of the plugin."
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:88
-msgid "Filter:"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:165
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:197
+msgid "Noise filter:"
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:90
-msgid "Average"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:169
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:202
+msgid ""
+" Increasing the noise filter parameter may help to reduce artifacts. The "
+"noise filter can range from 0-1 but values higher than 0.1 are rarely "
+"helpful. When the noise filter value is too low, e.g. 0.0 the image quality "
+"will be very poor. A useful value is 0.01. Using a high value for the noise "
+"filter will reduce the sharpening effect of the plugin."
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:92
-msgid "Quadratic"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:175
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:208
+msgid "Gaussian sharpness:"
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:93
-msgid "Cubic"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:179
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:213
+msgid ""
+" This is the sharpness for the gaussian convolution. Use this parameter "
+"when your blurring is of a Gaussian type. In most cases you should set this "
+"parameter to 0, because it causes nasty artifacts. When you use non-zero "
+"values, you will probably have to increase the correlation and/or noise "
+"filter parameters too."
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:96
-msgid "Black Frame..."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:184
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:218
+msgid "Matrix size:"
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:97
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:187
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:222
msgid ""
-" Use this button to add a new black frame file which will be used by the hot "
-"pixels removal filter."
-msgstr ""
-
-#: imageplugins/hotpixels/hotpixelstool.cpp:146
-#: utilities/imageeditor/editor/editorwindow.cpp:1339
-msgid "Loading: "
+" This parameter determines the size of the transformation matrix. "
+"Increasing the matrix width may give better results, especially when you "
+"have chosen large values for circular or gaussian sharpness."
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:186
-msgid "Select Black Frame Image"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:609
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:78
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:654
+msgid "Sharpen"
msgstr ""
-#: imageplugins/hotpixels/hotpixelstool.cpp:255
-msgid "Hot Pixels Correction"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:615
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:660
+msgid "Unsharp Mask"
msgstr ""
-#: imageplugins/hotpixels/blackframelistview.cpp:43
-msgid "Preview"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:638
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:683
+msgid "Photograph Refocus Settings File to Load"
msgstr ""
-#: imageplugins/hotpixels/blackframelistview.cpp:44
-#: imageplugins/inserttext/fontchooserwidget.cpp:160
-msgid "Size"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:650
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:695
+msgid "\"%1\" is not a Photograph Refocus settings text file."
msgstr ""
-#: imageplugins/hotpixels/blackframelistview.cpp:46
-msgid ""
-"_: This is a column which will contain the amount of HotPixels found in the "
-"black frame file\n"
-"HP"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:665
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:710
+msgid "Cannot load settings from the Photograph Refocus text file."
msgstr ""
-#: imageplugins/hotpixels/imageplugin_hotpixels.cpp:50
-msgid "Hot Pixels..."
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:674
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:719
+msgid "Photograph Refocus Settings File to Save"
msgstr ""
-#: imageplugins/filmgrain/filmgraintool.cpp:65
-#: imageplugins/filmgrain/filmgraintool.cpp:192
-msgid "Film Grain"
+#: imageplugins/coreplugin/sharpnesseditor/imageeffect_sharpen.cpp:691
+#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:736
+msgid "Cannot save settings to the Photograph Refocus text file."
msgstr ""
-#: imageplugins/filmgrain/filmgraintool.cpp:77
-#: imageplugins/infrared/infraredtool.cpp:79
-msgid "Sensitivity (ISO):"
+#: imageplugins/distortionfx/distortionfxtool.cpp:76
+#: imageplugins/distortionfx/distortionfxtool.cpp:392
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:65
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:72
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:373
+msgid "Distortion Effects"
msgstr ""
-#: imageplugins/filmgrain/filmgraintool.cpp:87
+#: imageplugins/distortionfx/distortionfxtool.cpp:80
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:92
msgid ""
-" Set here the film ISO-sensitivity to use for simulating the film graininess."
+" This is the preview of the distortion effect applied to the photograph."
msgstr ""
-#: imageplugins/filmgrain/imageplugin_filmgrain.cpp:49
-msgid "Add Film Grain..."
+#: imageplugins/distortionfx/distortionfxtool.cpp:98
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:103
+msgid "Fish Eyes"
msgstr ""
-#: imageplugins/antivignetting/imageplugin_antivignetting.cpp:48
-msgid "Vignetting Correction..."
+#: imageplugins/distortionfx/distortionfxtool.cpp:99
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:104
+msgid "Twirl"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:73
-#: imageplugins/antivignetting/antivignettingtool.cpp:367
-msgid "Vignetting Correction"
+#: imageplugins/distortionfx/distortionfxtool.cpp:100
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:105
+msgid "Cylindrical Hor."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:90
-msgid ""
-" You can see here a thumbnail preview of the anti-vignetting mask applied to "
-"the image."
+#: imageplugins/distortionfx/distortionfxtool.cpp:101
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:106
+msgid "Cylindrical Vert."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:95
-msgid "Density:"
+#: imageplugins/distortionfx/distortionfxtool.cpp:102
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:107
+msgid "Cylindrical H/V."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:101
-msgid ""
-" This value controls the degree of intensity attenuation by the filter at its "
-"point of maximum density."
+#: imageplugins/distortionfx/distortionfxtool.cpp:103
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:108
+msgid "Caricature"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:106
-msgid "Power:"
+#: imageplugins/distortionfx/distortionfxtool.cpp:104
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:109
+msgid "Multiple Corners"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:112
-msgid ""
-" This value is used as the exponent controlling the fall-off in density from "
-"the center of the filter to the periphery."
+#: imageplugins/distortionfx/distortionfxtool.cpp:105
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:110
+msgid "Waves Hor."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:123
-msgid ""
-" This value is the radius of the center filter. It is a multiple of the "
-"half-diagonal measure of the image, at which the density of the filter falls to "
-"zero."
+#: imageplugins/distortionfx/distortionfxtool.cpp:106
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:111
+msgid "Waves Vert."
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:131
-#: imageplugins/coreplugin/bcgtool.cpp:160
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:280
-msgid "Brightness:"
+#: imageplugins/distortionfx/distortionfxtool.cpp:107
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:112
+msgid "Block Waves 1"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:136
-msgid " Set here the brightness re-adjustment of the target image."
+#: imageplugins/distortionfx/distortionfxtool.cpp:108
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:113
+msgid "Block Waves 2"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:140
-#: imageplugins/coreplugin/bcgtool.cpp:166
-#: imageplugins/coreplugin/bwsepiatool.cpp:469
-#: imageplugins/coreplugin/iccprooftool.cpp:434
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:286
-msgid "Contrast:"
+#: imageplugins/distortionfx/distortionfxtool.cpp:109
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:114
+msgid "Circular Waves 1"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:145
-msgid " Set here the contrast re-adjustment of the target image."
+#: imageplugins/distortionfx/distortionfxtool.cpp:110
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:115
+msgid "Circular Waves 2"
msgstr ""
-#: imageplugins/antivignetting/antivignettingtool.cpp:155
-msgid " Set here the gamma re-adjustment of the target image."
+#: imageplugins/distortionfx/distortionfxtool.cpp:111
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:116
+msgid "Polar Coordinates"
msgstr ""
-#: imageplugins/whitebalance/imageplugin_whitebalance.cpp:48
-msgid "White Balance..."
+#: imageplugins/distortionfx/distortionfxtool.cpp:112
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:117
+msgid "Unpolar Coordinates"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:97
-#: imageplugins/whitebalance/whitebalancetool.cpp:690
-msgid "White Balance"
+#: imageplugins/distortionfx/distortionfxtool.cpp:113
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:118
+msgid "Tile"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:105
+#: imageplugins/distortionfx/distortionfxtool.cpp:115
msgid ""
-" You can see here the image's white-balance adjustments preview. You can pick "
-"color on image to see the color level corresponding on histogram."
+" Here, select the type of effect to apply to the image. Fish Eyes"
+"b>: warps the photograph around a 3D spherical shape to reproduce the common "
+"photograph 'Fish Eyes' effect. Twirl: spins the photograph to "
+"produce a Twirl pattern. Cylinder Hor.: warps the photograph around "
+"a horizontal cylinder. Cylinder Vert.: warps the photograph around "
+"a vertical cylinder. Cylinder H/V.: warps the photograph around 2 "
+"cylinders, vertical and horizontal. Caricature: distorts the "
+"photograph with the 'Fish Eyes' effect inverted. Multiple Corners: "
+"splits the photograph like a multiple corners pattern. Waves "
+"Horizontal: distorts the photograph with horizontal waves. Waves "
+"Vertical: distorts the photograph with vertical waves. Block Waves "
+"1: divides the image into cells and makes it look as if it is being "
+"viewed through glass blocks. Block Waves 2: like Block Waves 1 but "
+"with another version of glass blocks distortion. Circular Waves 1: "
+"distorts the photograph with circular waves. Circular Waves 2: "
+"another variation of the Circular Waves effect. Polar Coordinates: "
+"converts the photograph from rectangular to polar coordinates. Unpolar "
+"Coordinates: the Polar Coordinates effect inverted. Tile: "
+"splits the photograph into square blocks and moves them randomly inside the "
+"image. "
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:170
+#: imageplugins/distortionfx/distortionfxtool.cpp:151
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:157
msgid ""
-" Here you can see the target preview image histogram drawing of the selected "
-"image channel. This one is re-computed at any filter settings changes."
+" This value controls the iterations to use for Waves, Tile, and Neon "
+"effects."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:187
-msgid ""
-" Set here the white balance color temperature in Kelvin."
+#: imageplugins/distortionfx/imageeffect_distortionfx.cpp:119
+msgid ""
+" Here, select the type of effect to apply to the image. Fish Eyes"
+"b>: warps the photograph around a 3D spherical shape to reproduce the common "
+"photograph 'Fish Eyes' effect. Twirl: spins the photograph to "
+"produce a Twirl pattern. Cylinder Hor.: warps the photograph around "
+"a horizontal cylinder. Cylinder Vert.: warps the photograph around "
+"a vertical cylinder. Cylinder H/V.: warps the photograph around 2 "
+"cylinders, vertical and horizontal. Caricature: distorts the "
+"photograph with the 'Fish Eyes' effect inverted. Multiple Corners: "
+"splits the photograph like a multiple corners pattern. WavesQt "
+"Horizontal: distorts the photograph with horizontal waves. Waves "
+"Vertical: distorts the photograph with vertical waves. Block Waves "
+"1: divides the image into cells and makes it look as if it is being "
+"viewed through glass blocks. Block Waves 2: like Block Waves 1 but "
+"with another version of glass blocks distortion. Circular Waves 1: "
+"distorts the photograph with circular waves. Circular Waves 2: "
+"another variation of the Circular Waves effect. Polar Coordinates: "
+"converts the photograph from rectangular to polar coordinates. Unpolar "
+"Coordinates: the Polar Coordinates effect inverted. Tile: "
+"splits the photograph into square blocks and moves them randomly inside the "
+"image. "
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:196
-msgid "Preset:"
+#: imageplugins/distortionfx/imageplugin_distortionfx.cpp:50
+msgid "Distortion Effects..."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:198
-msgid "Candle"
+#: imageplugins/emboss/embosstool.cpp:65 imageplugins/emboss/embosstool.cpp:164
+#: imageplugins/emboss/imageeffect_emboss.cpp:165
+msgid "Emboss"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:199
-msgid "40W Lamp"
+#: imageplugins/emboss/embosstool.cpp:75
+#: imageplugins/emboss/imageeffect_emboss.cpp:85
+msgid "Depth:"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:200
-msgid "100W Lamp"
+#: imageplugins/emboss/embosstool.cpp:80
+#: imageplugins/emboss/imageeffect_emboss.cpp:89
+msgid " Set here the depth of the embossing image effect."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:201
-msgid "200W Lamp"
+#: imageplugins/emboss/imageeffect_emboss.cpp:55
+#: imageplugins/emboss/imageeffect_emboss.cpp:61
+msgid "Emboss Image"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:202
-msgid "Sunrise"
+#: imageplugins/emboss/imageeffect_emboss.cpp:63
+msgid "Emboss image effect plugin for digiKam."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:203
-msgid "Studio Lamp"
+#: imageplugins/emboss/imageeffect_emboss.cpp:73
+msgid "Emboss algorithm"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:204
-msgid "Moonlight"
+#: imageplugins/emboss/imageplugin_emboss.cpp:50
+msgid "Emboss..."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:205
-msgid "Neutral"
+#: imageplugins/filmgrain/filmgraintool.cpp:65
+#: imageplugins/filmgrain/filmgraintool.cpp:192
+#: imageplugins/filmgrain/imageeffect_filmgrain.cpp:66
+#: imageplugins/filmgrain/imageeffect_filmgrain.cpp:191
+msgid "Film Grain"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:206
-msgid "Daylight D50"
+#: imageplugins/filmgrain/filmgraintool.cpp:77
+#: imageplugins/filmgrain/imageeffect_filmgrain.cpp:88
+#: imageplugins/infrared/imageeffect_infrared.cpp:89
+#: imageplugins/infrared/infraredtool.cpp:79
+msgid "Sensitivity (ISO):"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:207
-msgid "Photo Flash"
+#: imageplugins/filmgrain/filmgraintool.cpp:87
+#: imageplugins/filmgrain/imageeffect_filmgrain.cpp:98
+msgid ""
+" Set here the film ISO-sensitivity to use for simulating the film "
+"graininess."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:208
-msgid "Sun"
+#: imageplugins/filmgrain/imageeffect_filmgrain.cpp:59
+msgid "Add Film Grain to Photograph"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:209
-msgid "Xenon Lamp"
+#: imageplugins/filmgrain/imageeffect_filmgrain.cpp:68
+msgid "A digiKam image plugin to apply a film grain effect to an image."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:210
-msgid "Daylight D65"
+#: imageplugins/filmgrain/imageplugin_filmgrain.cpp:49
+msgid "Add Film Grain..."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:213
-msgid ""
-" Select the white balance color temperature preset to use here:"
-" Candle: candle light (1850K)."
-" 40W Lamp: 40 Watt incandescent lamp (2680K)."
-" 100W Lamp: 100 Watt incandescent lamp (2800K)."
-" 200W Lamp: 200 Watt incandescent lamp (3000K)."
-" Sunrise: sunrise or sunset light (3200K)."
-" Studio Lamp: tungsten lamp used in photo studio or light at 1 hour "
-"from dusk/dawn (3400K)."
-" Moonlight: moon light (4100K)."
-" Neutral: neutral color temperature (4750K)."
-" Daylight D50: sunny daylight around noon (5000K)."
-" Photo Flash: electronic photo flash (5500K)."
-" Sun: effective sun temperature (5770K)."
-" Xenon Lamp: xenon lamp or light arc (6420K)."
-" Daylight D65: overcast sky light (6500K)."
-" None: no preset value."
+#: imageplugins/freerotation/freerotationtool.cpp:71
+#: imageplugins/freerotation/freerotationtool.cpp:304
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:61
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:70
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:293
+msgid "Free Rotation"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:235
-msgid "Temperature tone color picker."
+#: imageplugins/freerotation/freerotationtool.cpp:75
+msgid ""
+" This is the free rotation operation preview. If you move the mouse cursor "
+"on this preview, a vertical and horizontal dashed line will be drawn to "
+"guide you in adjusting the free rotation correction. Release the left mouse "
+"button to freeze the dashed line's position."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:236
-msgid ""
-" With this button, you can pick the color from original image used to set "
-"white color balance temperature and green component."
+#: imageplugins/freerotation/freerotationtool.cpp:96
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:102
+#: imageplugins/perspective/imageeffect_perspective.cpp:109
+#: imageplugins/perspective/perspectivetool.cpp:100
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:102
+#: imageplugins/sheartool/sheartool.cpp:94
+msgid "New width:"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:244
-msgid "Black point:"
+#: imageplugins/freerotation/freerotationtool.cpp:97
+#: imageplugins/freerotation/freerotationtool.cpp:101
+#: imageplugins/freerotation/freerotationtool.cpp:296
+#: imageplugins/freerotation/freerotationtool.cpp:297
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:103
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:107
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:285
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:286
+#: imageplugins/perspective/imageeffect_perspective.cpp:110
+#: imageplugins/perspective/imageeffect_perspective.cpp:114
+#: imageplugins/perspective/imageeffect_perspective.cpp:242
+#: imageplugins/perspective/imageeffect_perspective.cpp:243
+#: imageplugins/perspective/perspectivetool.cpp:101
+#: imageplugins/perspective/perspectivetool.cpp:105
+#: imageplugins/perspective/perspectivetool.cpp:235
+#: imageplugins/perspective/perspectivetool.cpp:236
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:103
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:107
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:298
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:299
+#: imageplugins/sheartool/sheartool.cpp:95
+#: imageplugins/sheartool/sheartool.cpp:99
+#: imageplugins/sheartool/sheartool.cpp:308
+#: imageplugins/sheartool/sheartool.cpp:309
+msgid " px"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:249
-msgid " Set here the black level value."
+#: imageplugins/freerotation/freerotationtool.cpp:100
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:106
+#: imageplugins/perspective/imageeffect_perspective.cpp:113
+#: imageplugins/perspective/perspectivetool.cpp:104
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:106
+#: imageplugins/sheartool/sheartool.cpp:98
+msgid "New height:"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:251
-msgid "Shadows:"
+#: imageplugins/freerotation/freerotationtool.cpp:106
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:118
+msgid "Main angle:"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:256
-msgid " Set here the shadows noise suppresion level."
+#: imageplugins/freerotation/freerotationtool.cpp:110
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:122
+msgid ""
+" An angle in degrees by which to rotate the image. A positive angle "
+"rotates the image clockwise; a negative angle rotates it counter-clockwise."
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:188
-#: imageplugins/whitebalance/whitebalancetool.cpp:258
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:299
-msgid "Saturation:"
+#: imageplugins/freerotation/freerotationtool.cpp:114
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:129
+msgid "Fine angle:"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:263
-msgid " Set here the saturation value."
+#: imageplugins/freerotation/freerotationtool.cpp:118
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:133
+msgid ""
+" This value in degrees will be added to main angle value to set fine "
+"target angle."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:270
-msgid " Set here the gamma correction value."
+#: imageplugins/freerotation/freerotationtool.cpp:121
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:139
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:152
+#: imageplugins/sheartool/sheartool.cpp:130
+msgid "Anti-Aliasing"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:277
+#: imageplugins/freerotation/freerotationtool.cpp:122
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:140
msgid ""
-" Set here the green component to set magenta color cast removal level."
+" Enable this option to apply the anti-aliasing filter to the rotated "
+"image. In order to smooth the target image, it will be blurred a little."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:284
-msgid ""
-" With this button, you can automatically adjust Exposure and Black Point "
-"values."
+" Select the method to process image auto-cropping to remove black frames "
+"around a rotated image."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:296
-msgid " Set here the main exposure compensation value in E.V."
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:72
+msgid "A digiKam image plugin to process free image rotation."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:298
-msgid "Fine:"
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:82
+msgid "Free Rotation algorithm"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:303
+#: imageplugins/freerotation/imageeffect_freerotation.cpp:87
msgid ""
-" This value in E.V will be added to main exposure compensation value to set "
-"fine exposure adjustment."
-msgstr ""
-
-#: imageplugins/whitebalance/whitebalancetool.cpp:783
-msgid "White Color Balance Settings File to Load"
+" This is the free image operation preview. If you move the mouse cursor on "
+"this preview, a vertical and horizontal dashed line will be drawn to guide "
+"you in adjusting the free rotation correction. Release the left mouse button "
+"to freeze the dashed line's position."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:796
-msgid "\"%1\" is not a White Color Balance settings text file."
+#: imageplugins/freerotation/imageplugin_freerotation.cpp:48
+msgid "Free Rotation..."
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:816
-msgid "Cannot load settings from the White Color Balance text file."
+#: imageplugins/hotpixels/blackframelistview.cpp:43
+msgid "Preview"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:825
-msgid "White Color Balance Settings File to Save"
+#: imageplugins/hotpixels/blackframelistview.cpp:44
+#: imageplugins/inserttext/fontchooserwidget.cpp:160
+msgid "Size"
msgstr ""
-#: imageplugins/whitebalance/whitebalancetool.cpp:845
-msgid "Cannot save settings to the White Color Balance text file."
+#: imageplugins/hotpixels/blackframelistview.cpp:46
+msgid ""
+"_: This is a column which will contain the amount of HotPixels found in the "
+"black frame file\n"
+"HP"
msgstr ""
-#: imageplugins/charcoal/charcoaltool.cpp:66
-#: imageplugins/charcoal/charcoaltool.cpp:199
-msgid "Charcoal"
+#: imageplugins/hotpixels/hotpixelstool.cpp:76
+msgid "Hot Pixels"
msgstr ""
-#: imageplugins/charcoal/charcoaltool.cpp:77
-msgid "Pencil size:"
+#: imageplugins/hotpixels/hotpixelstool.cpp:88
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:94
+msgid "Filter:"
msgstr ""
-#: imageplugins/charcoal/charcoaltool.cpp:82
-msgid " Set here the charcoal pencil size used to simulate the drawing."
+#: imageplugins/hotpixels/hotpixelstool.cpp:90
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:96
+msgid "Average"
msgstr ""
-#: imageplugins/charcoal/charcoaltool.cpp:86
-#: imageplugins/coreplugin/redeyetool.cpp:170
-#: imageplugins/oilpaint/oilpainttool.cpp:89
-msgid "Smooth:"
+#: imageplugins/hotpixels/hotpixelstool.cpp:91
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:97
+#: libs/greycstoration/greycstorationwidget.cpp:244
+msgid "Linear"
msgstr ""
-#: imageplugins/charcoal/charcoaltool.cpp:91
-msgid ""
-" This value controls the smoothing effect of the pencil under the canvas."
+#: imageplugins/hotpixels/hotpixelstool.cpp:92
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:98
+msgid "Quadratic"
msgstr ""
-#: imageplugins/charcoal/imageplugin_charcoal.cpp:50
-msgid "Charcoal Drawing..."
+#: imageplugins/hotpixels/hotpixelstool.cpp:93
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:99
+msgid "Cubic"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:99
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:457
-msgid "Adjust Curves"
+#: imageplugins/hotpixels/hotpixelstool.cpp:96
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:101
+msgid "Black Frame..."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:105
+#: imageplugins/hotpixels/hotpixelstool.cpp:97
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:102
msgid ""
-" This is the image's curve-adjustments preview. You can pick a spot on the "
-"image to see the corresponding level in the histogram."
+" Use this button to add a new black frame file which will be used by the "
+"hot pixels removal filter."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:129
-msgid ""
-" Select the histogram channel to display here:"
-" Luminosity: display the image's luminosity values."
-" Red: display the red image-channel values."
-" Green: display the green image-channel values."
-" Blue: display the blue image-channel values."
-" Alpha: display the alpha image-channel values. This channel "
-"corresponds to the transparency value and is supported by some image formats, "
-"such as PNG or TIF."
+#: imageplugins/hotpixels/hotpixelstool.cpp:146
+#: utilities/imageeditor/editor/editorwindow.cpp:1335
+msgid "Loading: "
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:177
-msgid ""
-" Here you can see the target preview image histogram drawing of the selected "
-"image channel. This one is re-computed at any curves settings changes."
+#: imageplugins/hotpixels/hotpixelstool.cpp:186
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:173
+msgid "Select Black Frame Image"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:190
-msgid ""
-" This is the curve drawing of the selected channel from original image"
+#: imageplugins/hotpixels/hotpixelstool.cpp:255
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:62
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:72
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:258
+msgid "Hot Pixels Correction"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:217
-msgid "Curve free mode"
+#: imageplugins/hotpixels/imageeffect_hotpixels.cpp:74
+msgid ""
+"A digiKam image plugin for fixing dots produced by hot/stuck/dead pixels "
+"from a CCD."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:218
-msgid " With this button, you can draw your curve free-hand with the mouse."
+#: imageplugins/hotpixels/imageplugin_hotpixels.cpp:50
+msgid "Hot Pixels..."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:226
-msgid "Curve smooth mode"
+#: imageplugins/infrared/imageeffect_infrared.cpp:61
+msgid "Simulate Infrared Film to Photograph"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:227
-msgid ""
-" With this button, you constrains the curve type to a smooth line with "
-"tension."
+#: imageplugins/infrared/imageeffect_infrared.cpp:68
+msgid "Infrared Film"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:242
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:261
-msgid "All channels shadow tone color picker"
+#: imageplugins/infrared/imageeffect_infrared.cpp:70
+msgid "A digiKam image plugin to simulate infrared film."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:243
+#: imageplugins/infrared/imageeffect_infrared.cpp:99
+#: imageplugins/infrared/infraredtool.cpp:89
msgid ""
-" With this button, you can pick the color from original image used to set "
-"Shadow Tone smooth curves point on Red, Green, Blue, and Luminosity "
-"channels."
+" Set here the ISO-sensitivity of the simulated infrared film. Increasing "
+"this value will increase the proportion of green color in the mix. It will "
+"also increase the halo effect on the hightlights, and the film graininess "
+"(if that box is checked). Note: to simulate an Ilford SFX200 "
+"infrared film, use a sensitivity excursion of 200 to 800. A sensitivity over "
+"800 simulates Kodak HIE high-speed infrared film. This last one "
+"creates a more dramatic photographic style. With this button, you can pick the color from original image used to set "
-"Middle Tone smooth curves point on Red, Green, Blue, and Luminosity "
-"channels."
-msgstr ""
-
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:262
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:281
-msgid "All channels highlight tone color picker"
+" This option adds infrared film grain to the image depending on ISO-"
+"sensitivity."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:263
-msgid ""
-" With this button, you can pick the color from original image used to set "
-"Highlight Tone smooth curves point on Red, Green, Blue, and Luminosity "
-"channels."
+#: imageplugins/infrared/imageeffect_infrared.cpp:223
+#: imageplugins/infrared/infraredtool.cpp:67
+#: imageplugins/infrared/infraredtool.cpp:222
+msgid "Infrared"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:272
-msgid "Reset current channel curves' values."
+#: imageplugins/infrared/imageplugin_infrared.cpp:49
+msgid "Infrared Film..."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:273
-msgid ""
-" If you press this button, all curves' values from the current selected "
-"channel will be reset to the default values."
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:111
+#: imageplugins/inpainting/imageplugin_inpainting.cpp:84
+msgid "Inpainting Photograph Tool"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:624
-msgid "Select Gimp Curves File to Load"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:112
+#: imageplugins/inpainting/imageplugin_inpainting.cpp:85
+msgid "You need to select a region to inpaint to use this tool"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:630
-msgid "Cannot load from the Gimp curves text file."
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:129
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:138
+msgid "Photograph Inpainting"
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:645
-msgid "Gimp Curves File to Save"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:140
+msgid "A digiKam image plugin to inpaint a photograph."
msgstr ""
-#: imageplugins/adjustcurves/adjustcurvestool.cpp:651
-msgid "Cannot save to the Gimp curves text file."
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:149
+#: imageplugins/restoration/imageeffect_restoration.cpp:83
+msgid "CImg library"
msgstr ""
-#: imageplugins/adjustcurves/imageplugin_adjustcurves.cpp:47
-msgid "Curves Adjust..."
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:152
+#: imageplugins/restoration/imageeffect_restoration.cpp:86
+msgid "Feedback and plugin polishing"
msgstr ""
-#: imageplugins/texture/imageplugin_texture.cpp:48
-msgid "Apply Texture..."
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:165
+#: imageplugins/inpainting/inpaintingtool.cpp:113
+#: imageplugins/restoration/imageeffect_restoration.cpp:97
+#: imageplugins/restoration/restorationtool.cpp:88
+msgid "Preset"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:68
-#: imageplugins/texture/texturetool.cpp:216
-msgid "Texture"
-msgstr ""
-
-#: imageplugins/texture/texturetool.cpp:81
-msgid "Paper"
-msgstr ""
-
-#: imageplugins/texture/texturetool.cpp:82
-msgid "Paper 2"
-msgstr ""
-
-#: imageplugins/texture/texturetool.cpp:83
-msgid "Fabric"
-msgstr ""
-
-#: imageplugins/texture/texturetool.cpp:84
-msgid "Burlap"
-msgstr ""
-
-#: imageplugins/texture/texturetool.cpp:85
-msgid "Bricks"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:173
+#: imageplugins/inpainting/inpaintingtool.cpp:121
+#: imageplugins/restoration/imageeffect_restoration.cpp:105
+#: imageplugins/restoration/restorationtool.cpp:96
+#: utilities/imageeditor/tools/imageresize.cpp:219
+msgid "Visit CImg library website"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:86
-msgid "Bricks 2"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:175
+#: imageplugins/inpainting/inpaintingtool.cpp:123
+#: imageplugins/restoration/imageeffect_restoration.cpp:107
+#: imageplugins/restoration/restorationtool.cpp:98
+msgid "Filtering type:"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:87
-msgid "Canvas"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:179
+#: imageplugins/inpainting/inpaintingtool.cpp:127
+msgid "Remove Small Artefact"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:88
-msgid "Marble"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:180
+#: imageplugins/inpainting/inpaintingtool.cpp:128
+msgid "Remove Medium Artefact"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:89
-msgid "Marble 2"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:181
+#: imageplugins/inpainting/inpaintingtool.cpp:129
+msgid "Remove Large Artefact"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:90
-msgid "Blue Jean"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:182
+#: imageplugins/inpainting/inpaintingtool.cpp:130
+msgid ""
+" Select the filter preset to use for photograph restoration: None"
+"b>: Most common values. Puts settings to default. Remove Small "
+"Artefact: inpaint small image artefact like image glitch. Remove "
+"Medium Artefact: inpaint medium image artefact. Remove Large "
+"Artefact: inpaint image artefact like unwanted object. "
msgstr ""
-#: imageplugins/texture/texturetool.cpp:91
-msgid "Cell Wood"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:413
+#: imageplugins/inpainting/inpaintingtool.cpp:378
+msgid "InPainting"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:92
-msgid "Metal Wire"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:420
+#: imageplugins/inpainting/inpaintingtool.cpp:385
+msgid "Photograph Inpainting Settings File to Load"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:93
-msgid "Modern"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:431
+#: imageplugins/inpainting/inpaintingtool.cpp:396
+msgid "\"%1\" is not a Photograph Inpainting settings text file."
msgstr ""
-#: imageplugins/texture/texturetool.cpp:94
-msgid "Wall"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:438
+#: imageplugins/inpainting/inpaintingtool.cpp:403
+msgid "Cannot load settings from the Photograph Inpainting text file."
msgstr ""
-#: imageplugins/texture/texturetool.cpp:95
-msgid "Moss"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:451
+#: imageplugins/inpainting/inpaintingtool.cpp:416
+msgid "Photograph Inpainting Settings File to Save"
msgstr ""
-#: imageplugins/texture/texturetool.cpp:96
-msgid "Stone"
+#: imageplugins/inpainting/imageeffect_inpainting.cpp:460
+#: imageplugins/inpainting/inpaintingtool.cpp:425
+msgid "Cannot save settings to the Photograph Inpainting text file."
msgstr ""
-#: imageplugins/texture/texturetool.cpp:98
-msgid " Set here the texture type to apply to the image."
+#: imageplugins/inpainting/imageplugin_inpainting.cpp:51
+msgid "Inpainting..."
msgstr ""
-#: imageplugins/texture/texturetool.cpp:102
-msgid "Relief:"
+#: imageplugins/inpainting/imageplugin_inpainting.cpp:56
+msgid ""
+"This filter can be used to inpaint a part in a photo. Select a region to "
+"inpaint to use this option."
msgstr ""
-#: imageplugins/texture/texturetool.cpp:107
-msgid " Set here the relief gain used to merge texture and image."
+#: imageplugins/inpainting/inpaintingtool.cpp:89
+msgid "Inpainting"
msgstr ""
-#: imageplugins/inserttext/imageplugin_inserttext.cpp:47
-msgid "Insert Text..."
+#: imageplugins/inpainting/inpaintingtool.cpp:95
+msgid ""
+" Here you can see the image selection preview with inpainting applied."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:86
msgid "Here you can choose the font to be used."
msgstr ""
+#: imageplugins/inserttext/fontchooserwidget.cpp:105
+msgid "Font"
+msgstr ""
+
#: imageplugins/inserttext/fontchooserwidget.cpp:112
msgid "Change font family?"
msgstr ""
@@ -5442,6 +6089,11 @@ msgstr ""
msgid "Regular"
msgstr ""
+#: imageplugins/inserttext/fontchooserwidget.cpp:217
+#: imageplugins/inserttext/fontchooserwidget.cpp:479
+msgid "Italic"
+msgstr ""
+
#: imageplugins/inserttext/fontchooserwidget.cpp:218
msgid "Bold"
msgstr ""
@@ -5460,9 +6112,9 @@ msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:240
msgid ""
-"Here you can switch between fixed a font size and a font size to be calculated "
-"dynamically and adjusted to any changing environment (e.g. widget dimensions, "
-"paper size)."
+"Here you can switch between fixed a font size and a font size to be "
+"calculated dynamically and adjusted to any changing environment (e.g. widget "
+"dimensions, paper size)."
msgstr ""
#: imageplugins/inserttext/fontchooserwidget.cpp:265
@@ -5473,601 +6125,634 @@ msgstr ""
msgid "Actual Font"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:73
+msgid "Insert Text on Photograph"
+msgstr ""
+
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:81
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:342
#: imageplugins/inserttext/inserttexttool.cpp:78
#: imageplugins/inserttext/inserttexttool.cpp:331
msgid "Insert Text"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:83
+msgid "A digiKam image plugin for inserting text on a photograph."
+msgstr ""
+
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:105
#: imageplugins/inserttext/inserttexttool.cpp:88
msgid ""
-" This previews the text inserted in the image. You can use the mouse to move "
-"the text to the right location."
+" This previews the text inserted in the image. You can use the mouse to "
+"move the text to the right location."
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:117
#: imageplugins/inserttext/inserttexttool.cpp:102
msgid " Here, enter the text you want to insert in your image."
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:123
#: imageplugins/inserttext/inserttexttool.cpp:107
msgid " Here you can choose the font to be used."
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:135
#: imageplugins/inserttext/inserttexttool.cpp:118
msgid "Align text to the left"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:141
#: imageplugins/inserttext/inserttexttool.cpp:124
msgid "Align text to the right"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:147
#: imageplugins/inserttext/inserttexttool.cpp:130
msgid "Align text to center"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:153
#: imageplugins/inserttext/inserttexttool.cpp:136
msgid "Align text to a block"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:161
#: imageplugins/inserttext/inserttexttool.cpp:143
msgid "Rotation:"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:164
#: imageplugins/inserttext/inserttexttool.cpp:146
msgid "90 Degrees"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:165
#: imageplugins/inserttext/inserttexttool.cpp:147
msgid "180 Degrees"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:166
#: imageplugins/inserttext/inserttexttool.cpp:148
msgid "270 Degrees"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:167
#: imageplugins/inserttext/inserttexttool.cpp:149
msgid " Select the text rotation to use."
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:173
+#: imageplugins/inserttext/inserttexttool.cpp:153
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:217
+#: imageplugins/noisereduction/noisereductiontool.cpp:217
+msgid "Color:"
+msgstr ""
+
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:175
#: imageplugins/inserttext/inserttexttool.cpp:155
msgid " Select the font color to use."
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:181
#: imageplugins/inserttext/inserttexttool.cpp:159
msgid "Add border"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:182
#: imageplugins/inserttext/inserttexttool.cpp:160
msgid "Add a solid border around text using current text color"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:184
#: imageplugins/inserttext/inserttexttool.cpp:162
msgid "Semi-transparent"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:185
#: imageplugins/inserttext/inserttexttool.cpp:163
msgid "Use semi-transparent text background under image"
msgstr ""
+#: imageplugins/inserttext/imageeffect_inserttext.cpp:242
#: imageplugins/inserttext/inserttexttool.cpp:232
msgid "Enter your text here!"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:100
-msgid "Adjust Levels"
+#: imageplugins/inserttext/imageplugin_inserttext.cpp:47
+msgid "Insert Text..."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:106
-msgid ""
-" Here you can see the image's level-adjustments preview. You can pick a spot "
-"on the image to see the corresponding level in the histogram."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:65
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:72
+msgid "Lens Distortion Correction"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:130
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:74
msgid ""
-" Here select the histogram channel to display:"
-" Luminosity: display the image's luminosity values."
-" Red: display the red image-channel values."
-" Green: display the green image-channel values."
-" Blue: display the blue image-channel values."
-" Alpha: display the alpha image-channel values. This channel "
-"corresponds to the transparency value and is supported by some image formats, "
-"such as PNG or TIF."
+"A digiKam image plugin to reduce spherical aberration caused by a lens to an "
+"image."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:143
-msgid ""
-" Here select the histogram scale."
-" If the image's maximal counts are small, you can use the linear scale."
-" The Logarithmic scale can be used when the maximal counts are big; if it is "
-"used, all values (small and large) will be visible on the graph."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:88
+msgid "Lens distortion correction algorithm."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:173
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:100
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:94
msgid ""
-" Here you can see the target preview image histogram drawing of the selected "
-"image channel. This one is re-computed at any levels settings changes."
+" You can see here a thumbnail preview of the distortion correction applied "
+"to a cross pattern."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:179
-msgid ""
-" This is the histogram drawing of the selected channel from original image"
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:106
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:99
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:282
+#: imageplugins/whitebalance/whitebalancetool.cpp:286
+msgid "Main:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:188
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:205
-msgid " Select the minimal intensity input value of the histogram."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:111
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:105
+msgid ""
+" This value controls the amount of distortion. Negative values correct "
+"lens barrel distortion, while positive values correct lens pincushion "
+"distortion."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:189
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:206
-msgid "Minimal intensity input."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:119
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:110
+msgid "Edge:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:197
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:219
-msgid " Select the maximal intensity input value of the histogram."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:124
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:116
+msgid ""
+" This value controls in the same manner as the Main control, but has more "
+"effect at the edges of the image than at the center."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:198
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:218
-msgid "Maximal intensity input."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:132
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:121
+msgid "Zoom:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:212
-msgid "Gamma input value."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:137
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:127
+msgid " This value rescales the overall image size."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:213
-msgid " Select the gamma input value."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:144
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:131
+msgid "Brighten:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:223
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:243
-msgid " Select the minimal intensity output value of the histogram."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:149
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:137
+msgid " This value adjusts the brightness in image corners."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:224
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:242
-msgid "Minimal intensity output."
+#: imageplugins/lensdistortion/imageeffect_lensdistortion.cpp:304
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:76
+#: imageplugins/lensdistortion/lensdistortiontool.cpp:315
+msgid "Lens Distortion"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:232
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:249
-msgid " Select the maximal intensity output value of the histogram."
+#: imageplugins/lensdistortion/imageplugin_lensdistortion.cpp:47
+msgid "Lens Distortion..."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:233
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:248
-msgid "Maximal intensity output."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:65
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:72
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:475
+#: imageplugins/noisereduction/noisereductiontool.cpp:75
+#: imageplugins/noisereduction/noisereductiontool.cpp:460
+msgid "Noise Reduction"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:262
-msgid ""
-" With this button, you can pick the color from original image used to set "
-"Shadow Tone levels input on Red, Green, Blue, and Luminosity channels."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:74
+msgid "A noise reduction image filter plugin for digiKam."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:272
-msgid ""
-" With this button, you can pick the color from original image used to set "
-"Middle Tone levels input on Red, Green, Blue, and Luminosity channels."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:83
+msgid "Noise Reduction algorithm. Developer"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:282
-msgid ""
-" With this button, you can pick the color from original image used to set "
-"Highlight Tone levels input on Red, Green, Blue, and Luminosity channels."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:94
+#: imageplugins/noisereduction/noisereductiontool.cpp:196
+msgid "Details"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:288
-msgid "Adjust all levels automatically."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:101
+#: imageplugins/noisereduction/noisereductiontool.cpp:100
+msgid ""
+" Radius: this control selects the gliding window size used for the "
+"filter. Larger values do not increase the amount of time needed to filter "
+"each pixel in the image but can cause blurring. This window moves across the "
+"image, and the color in it is smoothed to remove imperfections. In any case "
+"it must be about the same size as the noise granularity or somewhat more. If "
+"it is set higher than necessary, then it can cause unwanted blur."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:289
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:120
+#: imageplugins/noisereduction/noisereductiontool.cpp:117
msgid ""
-" If you press this button, all channel levels will be adjusted automatically."
+" Threshold: use the slider for coarse adjustment, and the spin "
+"control for fine adjustment to control edge detection sensitivity. This "
+"value should be set so that edges and details are clearly visible and noise "
+"is smoothed out. Adjustment must be made carefully, because the gap between "
+"\"noisy\", \"smooth\", and \"blur\" is very small. Adjust it as carefully as "
+"you would adjust the focus of a camera."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:294
-msgid "Reset current channel levels' values."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:133
+#: imageplugins/noisereduction/noisereductiontool.cpp:127
+msgid "Texture:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:295
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:138
+#: imageplugins/noisereduction/noisereductiontool.cpp:133
msgid ""
-" If you press this button, all levels' values from the current selected "
-"channel will be reset to the default values."
+" Texture: this control sets the texture accuracy. This value can be "
+"used, to get more or less texture accuracy. When decreased, then noise and "
+"texture are blurred out, when increased then texture is amplified, but also "
+"noise will increase. It has almost no effect on image edges."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:598
-msgid "Adjust Level"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:153
+#: imageplugins/noisereduction/noisereductiontool.cpp:146
+msgid ""
+" Sharpness: This value improves the frequency response for the "
+"filter. When it is too strong then not all noise can be removed, or spike "
+"noise may appear. Set it near to maximum, if you want to remove very weak "
+"noise or JPEG-artifacts, without losing detail."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:756
-msgid "Select Gimp Levels File to Load"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:164
+#: imageplugins/noisereduction/noisereductiontool.cpp:154
+msgid "Edge Lookahead:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:762
-msgid "Cannot load from the Gimp levels text file."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:169
+#: imageplugins/noisereduction/noisereductiontool.cpp:160
+msgid ""
+" Edge: This value defines the pixel distance to which the filter "
+"looks ahead for edges. When this value is increased, then spike noise is "
+"erased. You can eventually re-adjust the Edge filter, when you have "
+"changed this setting. When this value is too high, the adaptive filter can "
+"no longer accurately track image details, and noise or blurring can occur."
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:776
-msgid "Gimp Levels File to Save"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:181
+#: imageplugins/noisereduction/noisereductiontool.cpp:169
+msgid "Erosion:"
msgstr ""
-#: imageplugins/adjustlevels/adjustlevelstool.cpp:782
-msgid "Cannot save to the Gimp levels text file."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:186
+#: imageplugins/noisereduction/noisereductiontool.cpp:175
+msgid ""
+" Erosion: Use this to increase edge noise erosion and spike noise "
+"erosion (noise is removed by erosion)."
msgstr ""
-#: imageplugins/adjustlevels/imageplugin_adjustlevels.cpp:48
-msgid "Levels Adjust..."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:199
+#: imageplugins/noisereduction/noisereductiontool.cpp:269
+msgid "Advanced"
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:67
-msgid "Raindrops"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:201
+#: imageplugins/noisereduction/noisereductiontool.cpp:203
+msgid "Luminance:"
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:71
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:206
+#: imageplugins/noisereduction/noisereductiontool.cpp:209
msgid ""
-" This is the preview of the Raindrop effect."
-" Note: if you have previously selected an area in the editor, this will be "
-"unaffected by the filter. You can use this method to disable the Raindrops "
-"effect on a human face, for example."
+" Luminance: this control sets the luminance tolerance of the image."
+"We recommend using either the Color or the Luminance tolerance "
+"settings to make an image correction, not both at the same time. These "
+"settings do not influence the main smoothing process controlled by the "
+"Details settings."
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:87
-msgid "Drop size:"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:222
+#: imageplugins/noisereduction/noisereductiontool.cpp:223
+msgid ""
+" Color: this control sets the color tolerance of the image. It is "
+"recommended using either the Color or the Luminance tolerance "
+"to make image correction, not both at the same time. These settings do not "
+"influence the main smoothing process controlled by the Details "
+"settings."
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:92
-msgid " Set here the raindrops' size."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:238
+#: imageplugins/noisereduction/noisereductiontool.cpp:237
+msgid ""
+" Gamma: this control sets the gamma tolerance of the image. This "
+"value can be used to increase the tolerance values for darker areas (which "
+"commonly are noisier). This results in more blur for shadow areas."
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:96
-msgid "Number:"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:247
+#: imageplugins/noisereduction/noisereductiontool.cpp:243
+msgid "Damping:"
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:101
-msgid " This value controls the maximum number of raindrops."
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:252
+#: imageplugins/noisereduction/noisereductiontool.cpp:249
+msgid ""
+" Damping: this control sets the phase-jitter damping adjustment. "
+"This value defines how fast the adaptive filter-radius reacts to luminance "
+"variations. If increased, then edges appear smoother; if too high, then blur "
+"may occur. If at minimum, then noise and phase jitter at the edges can "
+"occur. It can suppress spike noise when increased, and this is the preferred "
+"method to remove it."
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:105
-msgid "Fish eyes:"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:482
+#: imageplugins/noisereduction/noisereductiontool.cpp:467
+msgid "Photograph Noise Reduction Settings File to Load"
msgstr ""
-#: imageplugins/raindrop/raindroptool.cpp:110
-msgid " This value is the fish-eye-effect optical distortion coefficient."
-msgstr ""
-
-#: imageplugins/raindrop/raindroptool.cpp:250
-msgid "RainDrop"
-msgstr ""
-
-#: imageplugins/raindrop/imageplugin_raindrop.cpp:47
-msgid "Raindrops..."
-msgstr ""
-
-#: imageplugins/blurfx/blurfxtool.cpp:68
-msgid "Blur FX"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:494
+#: imageplugins/noisereduction/noisereductiontool.cpp:479
+msgid "\"%1\" is not a Photograph Noise Reduction settings text file."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:83
-msgid "Zoom Blur"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:515
+#: imageplugins/noisereduction/noisereductiontool.cpp:499
+msgid "Cannot load settings from the Photograph Noise Reduction text file."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:84
-msgid "Radial Blur"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:524
+#: imageplugins/noisereduction/noisereductiontool.cpp:508
+msgid "Photograph Noise Reduction Settings File to Save"
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:85
-msgid "Far Blur"
+#: imageplugins/noisereduction/imageeffect_noisereduction.cpp:547
+#: imageplugins/noisereduction/noisereductiontool.cpp:531
+msgid "Cannot save settings to the Photograph Noise Reduction text file."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:86
-msgid "Motion Blur"
+#: imageplugins/noisereduction/imageplugin_noisereduction.cpp:48
+msgid "Noise Reduction..."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:87
-msgid "Softener Blur"
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:58
+msgid "Apply Oil Paint Effect"
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:88
-msgid "Skake Blur"
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:65
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:196
+#: imageplugins/oilpaint/oilpainttool.cpp:68
+#: imageplugins/oilpaint/oilpainttool.cpp:204
+msgid "Oil Paint"
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:89
-msgid "Focus Blur"
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:67
+msgid "An oil painting image effect plugin for digiKam."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:90
-msgid "Smart Blur"
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:77
+msgid "Oil paint algorithm"
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:91
-msgid "Frost Glass"
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:90
+#: imageplugins/oilpaint/oilpainttool.cpp:80
+msgid "Brush size:"
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:92
-msgid "Mosaic"
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:93
+#: imageplugins/oilpaint/oilpainttool.cpp:84
+msgid " Set here the brush size to use for simulating the oil painting."
msgstr ""
-#: imageplugins/blurfx/blurfxtool.cpp:94
+#: imageplugins/oilpaint/imageeffect_oilpaint.cpp:104
+#: imageplugins/oilpaint/oilpainttool.cpp:93
msgid ""
-" Select the blurring effect to apply to the image."
-" Zoom Blur: blurs the image along radial lines starting from a "
-"specified center point. This simulates the blur of a zooming camera."
-" Radial Blur: blurs the image by rotating the pixels around the "
-"specified center point. This simulates the blur of a rotating camera."
-" Far Blur: blurs the image by using far pixels. This simulates the "
-"blur of an unfocalized camera lens."
-" Motion Blur: blurs the image by moving the pixels horizontally. This "
-"simulates the blur of a linear moving camera."
-" Softener Blur: blurs the image softly in dark tones and hardly in "
-"light tones. This gives images a dreamy and glossy soft focus effect. It's "
-"ideal for creating romantic portraits, glamour photographs, or giving images a "
-"warm and subtle glow."
-" Skake Blur: blurs the image by skaking randomly the pixels. This "
-"simulates the blur of a random moving camera."
-" Focus Blur: blurs the image corners to reproduce the astigmatism "
-"distortion of a lens."
-" Smart Blur: finds the edges of color in your image and blurs them "
-"without muddying the rest of the image."
-" Frost Glass: blurs the image by randomly disperse light coming "
-"through a frosted glass."
-" Mosaic: divides the photograph into rectangular cells and then "
-"recreates it by filling those cells with average pixel value."
-msgstr ""
-
-#: imageplugins/blurfx/blurfxtool.cpp:118
-msgid "Distance:"
-msgstr ""
-
-#: imageplugins/blurfx/blurfxtool.cpp:122
-msgid " Set here the blur distance in pixels."
-msgstr ""
-
-#: imageplugins/blurfx/blurfxtool.cpp:128
-msgid " This value controls the level to use with the current effect."
-msgstr ""
-
-#: imageplugins/blurfx/blurfxtool.cpp:399
-msgid "Blur Effects"
+" This value controls the smoothing effect of the brush under the canvas."
msgstr ""
-#: imageplugins/blurfx/imageplugin_blurfx.cpp:48
-msgid "Blur Effects..."
+#: imageplugins/oilpaint/imageplugin_oilpaint.cpp:48
+msgid "Oil Paint..."
msgstr ""
-#: imageplugins/border/bordertool.cpp:70
-#: imageplugins/border/bordertool.cpp:570
-msgid "Add Border"
+#: imageplugins/perspective/imageeffect_perspective.cpp:64
+msgid "Adjust Photograph Perspective"
msgstr ""
-#: imageplugins/border/bordertool.cpp:88
-msgid "Solid"
+#: imageplugins/perspective/imageeffect_perspective.cpp:72
+#: imageplugins/perspective/perspectivetool.cpp:74
+msgid "Perspective"
msgstr ""
-#: imageplugins/border/bordertool.cpp:91
-msgid "Beveled"
+#: imageplugins/perspective/imageeffect_perspective.cpp:74
+msgid "A digiKam image plugin to process image perspective adjustment."
msgstr ""
-#: imageplugins/border/bordertool.cpp:92
-msgid "Decorative Pine"
+#: imageplugins/perspective/imageeffect_perspective.cpp:96
+#: imageplugins/perspective/perspectivetool.cpp:84
+msgid ""
+" This is the perspective transformation operation preview. You can use the "
+"mouse for dragging the corner to adjust the perspective transformation area."
msgstr ""
-#: imageplugins/border/bordertool.cpp:93
-msgid "Decorative Wood"
+#: imageplugins/perspective/imageeffect_perspective.cpp:126
+#: imageplugins/perspective/perspectivetool.cpp:112
+msgid "Angles (in degrees):"
msgstr ""
-#: imageplugins/border/bordertool.cpp:94
-msgid "Decorative Paper"
+#: imageplugins/perspective/imageeffect_perspective.cpp:127
+#: imageplugins/perspective/perspectivetool.cpp:113
+msgid " Top left:"
msgstr ""
-#: imageplugins/border/bordertool.cpp:95
-msgid "Decorative Parquet"
+#: imageplugins/perspective/imageeffect_perspective.cpp:129
+#: imageplugins/perspective/perspectivetool.cpp:115
+msgid " Top right:"
msgstr ""
-#: imageplugins/border/bordertool.cpp:96
-msgid "Decorative Ice"
+#: imageplugins/perspective/imageeffect_perspective.cpp:131
+#: imageplugins/perspective/perspectivetool.cpp:117
+msgid " Bottom left:"
msgstr ""
-#: imageplugins/border/bordertool.cpp:97
-msgid "Decorative Leaf"
+#: imageplugins/perspective/imageeffect_perspective.cpp:133
+#: imageplugins/perspective/perspectivetool.cpp:119
+msgid " Bottom right:"
msgstr ""
-#: imageplugins/border/bordertool.cpp:98
-msgid "Decorative Marble"
+#: imageplugins/perspective/imageeffect_perspective.cpp:151
+#: imageplugins/perspective/perspectivetool.cpp:126
+msgid "Draw preview while moving"
msgstr ""
-#: imageplugins/border/bordertool.cpp:99
-msgid "Decorative Rain"
+#: imageplugins/perspective/imageeffect_perspective.cpp:155
+#: imageplugins/perspective/perspectivetool.cpp:130
+msgid "Draw grid"
msgstr ""
-#: imageplugins/border/bordertool.cpp:100
-msgid "Decorative Craters"
+#: imageplugins/perspective/imageeffect_perspective.cpp:160
+#: imageplugins/perspective/perspectivetool.cpp:134
+#: libs/dialogs/imageguidedlg.cpp:218
+msgid "Guide color:"
msgstr ""
-#: imageplugins/border/bordertool.cpp:101
-msgid "Decorative Dried"
+#: imageplugins/perspective/imageeffect_perspective.cpp:162
+#: imageplugins/perspective/perspectivetool.cpp:136
+#: libs/dialogs/imageguidedlg.cpp:220
+#: utilities/imageeditor/editor/editortoolsettings.cpp:146
+msgid " Set here the color used to draw guides dashed-lines."
msgstr ""
-#: imageplugins/border/bordertool.cpp:102
-msgid "Decorative Pink"
+#: imageplugins/perspective/imageeffect_perspective.cpp:166
+#: imageplugins/perspective/perspectivetool.cpp:140
+#: libs/dialogs/imageguidedlg.cpp:224
+msgid "Guide width:"
msgstr ""
-#: imageplugins/border/bordertool.cpp:103
-msgid "Decorative Stone"
+#: imageplugins/perspective/imageeffect_perspective.cpp:168
+#: imageplugins/perspective/perspectivetool.cpp:144
+#: libs/dialogs/imageguidedlg.cpp:226
+#: utilities/imageeditor/editor/editortoolsettings.cpp:150
+msgid " Set here the width in pixels used to draw guides dashed-lines."
msgstr ""
-#: imageplugins/border/bordertool.cpp:104
-msgid "Decorative Chalk"
+#: imageplugins/perspective/imageplugin_perspective.cpp:47
+msgid "Perspective Adjustment..."
msgstr ""
-#: imageplugins/border/bordertool.cpp:105
-msgid "Decorative Granite"
+#: imageplugins/perspective/perspectivewidget.cpp:205
+msgid "Perspective Adjustment"
msgstr ""
-#: imageplugins/border/bordertool.cpp:106
-msgid "Decorative Rock"
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:57
+msgid "Add Raindrops to Photograph"
msgstr ""
-#: imageplugins/border/bordertool.cpp:107
-msgid "Decorative Wall"
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:64
+#: imageplugins/raindrop/raindroptool.cpp:67
+msgid "Raindrops"
msgstr ""
-#: imageplugins/border/bordertool.cpp:109
-msgid " Select the border type to add around the image."
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:66
+msgid "A digiKam image plugin to add raindrops to an image."
msgstr ""
-#: imageplugins/border/bordertool.cpp:116
-msgid "Preserve Aspect Ratio"
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:76
+msgid "Raindrops algorithm"
msgstr ""
-#: imageplugins/border/bordertool.cpp:117
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:84
+#: imageplugins/raindrop/raindroptool.cpp:71
msgid ""
-"Enable this option if you want to preserve the aspect ratio of the image. If "
-"enabled, the border width will be in percent of the image size, else the border "
-"width will in pixels."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:122
-#: utilities/imageeditor/tools/imageresize.cpp:194
-msgid "Width (%):"
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:126
-msgid " Set here the border width in percent of the image size."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:128
-msgid "Width (pixels):"
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:131
-msgid " Set here the border width in pixels to add around the image."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:384
-msgid "First:"
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:385
-msgid "Second:"
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:386
-msgid " Set here the foreground color of the border."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:387
-msgid " Set here the Background color of the border."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:403
-msgid " Set here the color of the main border."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:404
-msgid " Set here the color of the line."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:410
-msgid " Set here the color of the upper left area."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:411
-msgid " Set here the color of the lower right area."
-msgstr ""
-
-#: imageplugins/border/bordertool.cpp:432
-msgid " Set here the color of the first line."
+" This is the preview of the Raindrop effect. Note: if you have "
+"previously selected an area in the editor, this will be unaffected by the "
+"filter. You can use this method to disable the Raindrops effect on a human "
+"face, for example."
msgstr ""
-#: imageplugins/border/bordertool.cpp:433
-msgid " Set here the color of the second line."
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:94
+#: imageplugins/raindrop/raindroptool.cpp:87
+msgid "Drop size:"
msgstr ""
-#: imageplugins/border/imageplugin_border.cpp:48
-msgid "Add Border..."
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:99
+#: imageplugins/raindrop/raindroptool.cpp:92
+msgid " Set here the raindrops' size."
msgstr ""
-#: imageplugins/emboss/imageplugin_emboss.cpp:50
-msgid "Emboss..."
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:106
+#: imageplugins/raindrop/raindroptool.cpp:96
+msgid "Number:"
msgstr ""
-#: imageplugins/emboss/embosstool.cpp:65
-#: imageplugins/emboss/embosstool.cpp:164
-msgid "Emboss"
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:111
+#: imageplugins/raindrop/raindroptool.cpp:101
+msgid " This value controls the maximum number of raindrops."
msgstr ""
-#: imageplugins/emboss/embosstool.cpp:75
-msgid "Depth:"
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:118
+#: imageplugins/raindrop/raindroptool.cpp:105
+msgid "Fish eyes:"
msgstr ""
-#: imageplugins/emboss/embosstool.cpp:80
-msgid " Set here the depth of the embossing image effect."
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:123
+#: imageplugins/raindrop/raindroptool.cpp:110
+msgid " This value is the fish-eye-effect optical distortion coefficient."
msgstr ""
-#: imageplugins/restoration/restorationtool.cpp:70
-#: imageplugins/restoration/restorationtool.cpp:301
-msgid "Restoration"
+#: imageplugins/raindrop/imageeffect_raindrop.cpp:254
+#: imageplugins/raindrop/raindroptool.cpp:250
+msgid "RainDrop"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:113
-#: imageplugins/restoration/restorationtool.cpp:88
-msgid "Preset"
+#: imageplugins/raindrop/imageplugin_raindrop.cpp:47
+msgid "Raindrops..."
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:121
-#: imageplugins/restoration/restorationtool.cpp:96
-#: utilities/imageeditor/tools/imageresize.cpp:219
-msgid "Visit CImg library website"
+#: imageplugins/restoration/imageeffect_restoration.cpp:63
+#: imageplugins/restoration/imageeffect_restoration.cpp:72
+msgid "Photograph Restoration"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:123
-#: imageplugins/restoration/restorationtool.cpp:98
-msgid "Filtering type:"
+#: imageplugins/restoration/imageeffect_restoration.cpp:74
+msgid "A digiKam image plugin to restore a photograph."
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:111
#: imageplugins/restoration/restorationtool.cpp:102
msgid "Reduce Uniform Noise"
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:112
#: imageplugins/restoration/restorationtool.cpp:103
msgid "Reduce JPEG Artefacts"
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:113
#: imageplugins/restoration/restorationtool.cpp:104
msgid "Reduce Texturing"
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:114
#: imageplugins/restoration/restorationtool.cpp:105
msgid ""
-" Select the filter preset to use for photograph restoration:"
-" None: Most common values. Puts settings to default."
-" Reduce Uniform Noise: reduce small image artifacts like sensor noise."
-" Reduce JPEG Artefacts: reduce large image artifacts like JPEG "
-"compression mosaic."
-" Reduce Texturing: reduce image artifacts like paper texture or Moire "
-"patterns of a scanned image."
-" "
+" Select the filter preset to use for photograph restoration: None"
+"b>: Most common values. Puts settings to default. Reduce Uniform Noise"
+"b>: reduce small image artifacts like sensor noise. Reduce JPEG "
+"Artefacts: reduce large image artifacts like JPEG compression mosaic."
+" Reduce Texturing: reduce image artifacts like paper texture or "
+"Moire patterns of a scanned image. "
+msgstr ""
+
+#: imageplugins/restoration/imageeffect_restoration.cpp:293
+#: imageplugins/restoration/restorationtool.cpp:70
+#: imageplugins/restoration/restorationtool.cpp:301
+msgid "Restoration"
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:301
#: imageplugins/restoration/restorationtool.cpp:308
msgid "Photograph Restoration Settings File to Load"
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:312
#: imageplugins/restoration/restorationtool.cpp:319
msgid "\"%1\" is not a Photograph Restoration settings text file."
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:321
#: imageplugins/restoration/restorationtool.cpp:328
msgid "Cannot load settings from the Photograph Restoration text file."
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:334
#: imageplugins/restoration/restorationtool.cpp:341
msgid "Photograph Restoration Settings File to Save"
msgstr ""
+#: imageplugins/restoration/imageeffect_restoration.cpp:343
#: imageplugins/restoration/restorationtool.cpp:350
msgid "Cannot save settings to the Photograph Restoration text file."
msgstr ""
@@ -6076,3460 +6761,3136 @@ msgstr ""
msgid "Restoration..."
msgstr ""
-#: imageplugins/freerotation/imageplugin_freerotation.cpp:48
-msgid "Free Rotation..."
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:59
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:71
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:306
+#: imageplugins/sheartool/sheartool.cpp:69
+#: imageplugins/sheartool/sheartool.cpp:316
+msgid "Shear Tool"
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:71
-#: imageplugins/freerotation/freerotationtool.cpp:304
-msgid "Free Rotation"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:73
+msgid "A digiKam image plugin to shear an image."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:75
-msgid ""
-" This is the free rotation operation preview. If you move the mouse cursor on "
-"this preview, a vertical and horizontal dashed line will be drawn to guide you "
-"in adjusting the free rotation correction. Release the left mouse button to "
-"freeze the dashed line's position."
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:82
+msgid "Shear algorithm"
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:96
-#: imageplugins/perspective/perspectivetool.cpp:100
-#: imageplugins/sheartool/sheartool.cpp:94
-msgid "New width:"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:87
+msgid ""
+" This is the shearing image operation preview. If you move the mouse "
+"cursor on this preview, a vertical and horizontal dashed line will be drawn "
+"to guide you in adjusting the shearing correction. Release the left mouse "
+"button to freeze the dashed line's position."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:97
-#: imageplugins/freerotation/freerotationtool.cpp:101
-#: imageplugins/freerotation/freerotationtool.cpp:296
-#: imageplugins/freerotation/freerotationtool.cpp:297
-#: imageplugins/perspective/perspectivetool.cpp:101
-#: imageplugins/perspective/perspectivetool.cpp:105
-#: imageplugins/perspective/perspectivetool.cpp:235
-#: imageplugins/perspective/perspectivetool.cpp:236
-#: imageplugins/sheartool/sheartool.cpp:95
-#: imageplugins/sheartool/sheartool.cpp:99
-#: imageplugins/sheartool/sheartool.cpp:308
-#: imageplugins/sheartool/sheartool.cpp:309
-msgid " px"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:118
+#: imageplugins/sheartool/sheartool.cpp:104
+msgid "Main horizontal angle:"
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:100
-#: imageplugins/perspective/perspectivetool.cpp:104
-#: imageplugins/sheartool/sheartool.cpp:98
-msgid "New height:"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:122
+#: imageplugins/sheartool/sheartool.cpp:108
+msgid " The main horizontal shearing angle, in degrees."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:106
-msgid "Main angle:"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:126
+#: imageplugins/sheartool/sheartool.cpp:110
+msgid "Fine horizontal angle:"
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:110
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:130
+#: imageplugins/sheartool/sheartool.cpp:114
msgid ""
-" An angle in degrees by which to rotate the image. A positive angle rotates "
-"the image clockwise; a negative angle rotates it counter-clockwise."
+" This value in degrees will be added to main horizontal angle value to set "
+"fine adjustments."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:114
-msgid "Fine angle:"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:135
+#: imageplugins/sheartool/sheartool.cpp:117
+msgid "Main vertical angle:"
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:118
-msgid ""
-" This value in degrees will be added to main angle value to set fine target "
-"angle."
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:139
+#: imageplugins/sheartool/sheartool.cpp:121
+msgid " The main vertical shearing angle, in degrees."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:121
-#: imageplugins/sheartool/sheartool.cpp:130
-msgid "Anti-Aliasing"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:143
+#: imageplugins/sheartool/sheartool.cpp:123
+msgid "Fine vertical angle:"
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:122
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:147
+#: imageplugins/sheartool/sheartool.cpp:127
msgid ""
-" Enable this option to apply the anti-aliasing filter to the rotated image. "
-"In order to smooth the target image, it will be blurred a little."
-msgstr ""
-
-#: imageplugins/freerotation/freerotationtool.cpp:126
-msgid "Auto-crop:"
+" This value in degrees will be added to main vertical angle value to set "
+"fine adjustments."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:129
-msgid "Widest Area"
+#: imageplugins/sheartool/imageeffect_sheartool.cpp:153
+#: imageplugins/sheartool/sheartool.cpp:131
+msgid ""
+" Enable this option to apply the anti-aliasing filter to the sheared "
+"image. To smooth the target image, it will be blurred a little."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:130
-msgid "Largest Area"
+#: imageplugins/sheartool/imageplugin_sheartool.cpp:47
+msgid "Shear..."
msgstr ""
-#: imageplugins/freerotation/freerotationtool.cpp:132
+#: imageplugins/sheartool/sheartool.cpp:73
msgid ""
-" Select the method to process image auto-cropping to remove black frames "
-"around a rotated image."
+" This is the shear operation preview. If you move the mouse cursor on this "
+"preview, a vertical and horizontal dashed line will be drawn to guide you in "
+"adjusting the shear correction. Release the left mouse button to freeze the "
+"dashed line's position."
msgstr ""
-#: imageplugins/distortionfx/imageplugin_distortionfx.cpp:50
-msgid "Distortion Effects..."
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:75
+msgid "Template Superimpose to Photograph"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:76
-#: imageplugins/distortionfx/distortionfxtool.cpp:392
-msgid "Distortion Effects"
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:83
+#: imageplugins/superimpose/superimposetool.cpp:81
+msgid "Template Superimpose"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:80
-msgid ""
-" This is the preview of the distortion effect applied to the photograph."
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:85
+msgid "A digiKam image plugin to superimpose a template onto a photograph."
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:98
-msgid "Fish Eyes"
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:109
+#: imageplugins/superimpose/superimposetool.cpp:91
+msgid " This is the preview of the template superimposed onto the image."
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:99
-msgid "Twirl"
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:121
+#: imageplugins/superimpose/superimposetool.cpp:103
+#: utilities/lighttable/lighttablepreview.cpp:378
+#: utilities/lighttable/lighttablewindow.cpp:539
+msgid "Zoom in"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:100
-msgid "Cylindrical Hor."
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:127
+#: imageplugins/superimpose/superimposetool.cpp:109
+#: utilities/lighttable/lighttablepreview.cpp:379
+#: utilities/lighttable/lighttablewindow.cpp:544
+msgid "Zoom out"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:101
-msgid "Cylindrical Vert."
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:134
+#: imageplugins/superimpose/superimposetool.cpp:116
+msgid "Move"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:102
-msgid "Cylindrical H/V."
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:151
+#: imageplugins/superimpose/superimposetool.cpp:140
+msgid "Root Directory..."
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:103
-msgid "Caricature"
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:152
+#: imageplugins/superimpose/superimposetool.cpp:141
+msgid " Set here the current templates' root directory."
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:104
-msgid "Multiple Corners"
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:240
+#: imageplugins/superimpose/superimposetool.cpp:233
+msgid "Select Template Root Directory to Use"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:105
-msgid "Waves Hor."
+#: imageplugins/superimpose/imageeffect_superimpose.cpp:269
+#: imageplugins/superimpose/superimposetool.cpp:262
+msgid "Super Impose"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:106
-msgid "Waves Vert."
+#: imageplugins/superimpose/imageplugin_superimpose.cpp:49
+msgid "Template Superimpose..."
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:107
-msgid "Block Waves 1"
+#: imageplugins/texture/imageeffect_texture.cpp:58
+#: imageplugins/texture/imageeffect_texture.cpp:65
+msgid "Apply Texture"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:108
-msgid "Block Waves 2"
+#: imageplugins/texture/imageeffect_texture.cpp:67
+msgid "A digiKam image plugin to apply a decorative texture to an image."
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:109
-msgid "Circular Waves 1"
+#: imageplugins/texture/imageeffect_texture.cpp:90
+#: imageplugins/texture/texturetool.cpp:81
+msgid "Paper"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:110
-msgid "Circular Waves 2"
+#: imageplugins/texture/imageeffect_texture.cpp:91
+#: imageplugins/texture/texturetool.cpp:82
+msgid "Paper 2"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:111
-msgid "Polar Coordinates"
+#: imageplugins/texture/imageeffect_texture.cpp:92
+#: imageplugins/texture/texturetool.cpp:83
+msgid "Fabric"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:112
-msgid "Unpolar Coordinates"
+#: imageplugins/texture/imageeffect_texture.cpp:93
+#: imageplugins/texture/texturetool.cpp:84
+msgid "Burlap"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:113
-msgid "Tile"
+#: imageplugins/texture/imageeffect_texture.cpp:94
+#: imageplugins/texture/texturetool.cpp:85
+msgid "Bricks"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:115
-msgid ""
-" Here, select the type of effect to apply to the image."
-" Fish Eyes: warps the photograph around a 3D spherical shape to "
-"reproduce the common photograph 'Fish Eyes' effect."
-" Twirl: spins the photograph to produce a Twirl pattern."
-" Cylinder Hor.: warps the photograph around a horizontal cylinder."
-" Cylinder Vert.: warps the photograph around a vertical cylinder."
-" Cylinder H/V.: warps the photograph around 2 cylinders, vertical and "
-"horizontal."
-" Caricature: distorts the photograph with the 'Fish Eyes' effect "
-"inverted."
-" Multiple Corners: splits the photograph like a multiple corners "
-"pattern."
-" Waves Horizontal: distorts the photograph with horizontal waves."
-" Waves Vertical: distorts the photograph with vertical waves."
-" Block Waves 1: divides the image into cells and makes it look as if "
-"it is being viewed through glass blocks."
-" Block Waves 2: like Block Waves 1 but with another version of glass "
-"blocks distortion."
-" Circular Waves 1: distorts the photograph with circular waves."
-" Circular Waves 2: another variation of the Circular Waves effect."
-" Polar Coordinates: converts the photograph from rectangular to polar "
-"coordinates."
-" Unpolar Coordinates: the Polar Coordinates effect inverted."
-" Tile: splits the photograph into square blocks and moves them "
-"randomly inside the image."
-" "
+#: imageplugins/texture/imageeffect_texture.cpp:95
+#: imageplugins/texture/texturetool.cpp:86
+msgid "Bricks 2"
msgstr ""
-#: imageplugins/distortionfx/distortionfxtool.cpp:151
-msgid ""
-" This value controls the iterations to use for Waves, Tile, and Neon effects."
+#: imageplugins/texture/imageeffect_texture.cpp:96
+#: imageplugins/texture/texturetool.cpp:87
+msgid "Canvas"
msgstr ""
-#: imageplugins/oilpaint/imageplugin_oilpaint.cpp:48
-msgid "Oil Paint..."
+#: imageplugins/texture/imageeffect_texture.cpp:97
+#: imageplugins/texture/texturetool.cpp:88
+msgid "Marble"
msgstr ""
-#: imageplugins/oilpaint/oilpainttool.cpp:68
-#: imageplugins/oilpaint/oilpainttool.cpp:204
-msgid "Oil Paint"
+#: imageplugins/texture/imageeffect_texture.cpp:98
+#: imageplugins/texture/texturetool.cpp:89
+msgid "Marble 2"
msgstr ""
-#: imageplugins/oilpaint/oilpainttool.cpp:80
-msgid "Brush size:"
+#: imageplugins/texture/imageeffect_texture.cpp:99
+#: imageplugins/texture/texturetool.cpp:90
+msgid "Blue Jean"
msgstr ""
-#: imageplugins/oilpaint/oilpainttool.cpp:84
-msgid " Set here the brush size to use for simulating the oil painting."
+#: imageplugins/texture/imageeffect_texture.cpp:100
+#: imageplugins/texture/texturetool.cpp:91
+msgid "Cell Wood"
msgstr ""
-#: imageplugins/oilpaint/oilpainttool.cpp:93
-msgid ""
-" This value controls the smoothing effect of the brush under the canvas."
+#: imageplugins/texture/imageeffect_texture.cpp:101
+#: imageplugins/texture/texturetool.cpp:92
+msgid "Metal Wire"
msgstr ""
-#: imageplugins/infrared/infraredtool.cpp:67
-#: imageplugins/infrared/infraredtool.cpp:222
-msgid "Infrared"
+#: imageplugins/texture/imageeffect_texture.cpp:102
+#: imageplugins/texture/texturetool.cpp:93
+msgid "Modern"
msgstr ""
-#: imageplugins/infrared/infraredtool.cpp:89
-msgid ""
-" Set here the ISO-sensitivity of the simulated infrared film. Increasing this "
-"value will increase the proportion of green color in the mix. It will also "
-"increase the halo effect on the hightlights, and the film graininess (if that "
-"box is checked). Note: to simulate an Ilford SFX200 infrared film, use a sensitivity "
-"excursion of 200 to 800. A sensitivity over 800 simulates Kodak HIE "
-"high-speed infrared film. This last one creates a more dramatic photographic "
-"style. This option adds infrared film grain to the image depending on "
-"ISO-sensitivity."
+#: imageplugins/texture/imageeffect_texture.cpp:105
+#: imageplugins/texture/texturetool.cpp:96
+msgid "Stone"
msgstr ""
-#: imageplugins/infrared/imageplugin_infrared.cpp:49
-msgid "Infrared Film..."
+#: imageplugins/texture/imageeffect_texture.cpp:106
+#: imageplugins/texture/texturetool.cpp:98
+msgid " Set here the texture type to apply to the image."
msgstr ""
-#: imageplugins/perspective/imageplugin_perspective.cpp:47
-msgid "Perspective Adjustment..."
+#: imageplugins/texture/imageeffect_texture.cpp:113
+#: imageplugins/texture/texturetool.cpp:102
+msgid "Relief:"
msgstr ""
-#: imageplugins/perspective/perspectivewidget.cpp:205
-msgid "Perspective Adjustment"
+#: imageplugins/texture/imageeffect_texture.cpp:118
+#: imageplugins/texture/texturetool.cpp:107
+msgid " Set here the relief gain used to merge texture and image."
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:74
-msgid "Perspective"
+#: imageplugins/texture/imageeffect_texture.cpp:211
+#: imageplugins/texture/texturetool.cpp:68
+#: imageplugins/texture/texturetool.cpp:216
+msgid "Texture"
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:84
-msgid ""
-" This is the perspective transformation operation preview. You can use the "
-"mouse for dragging the corner to adjust the perspective transformation area."
+#: imageplugins/texture/imageplugin_texture.cpp:48
+msgid "Apply Texture..."
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:112
-msgid "Angles (in degrees):"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:83
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:95
+msgid "White Color Balance Correction"
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:113
-msgid " Top left:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:97
+msgid "A digiKam image plugin to correct white color balance."
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:115
-msgid " Top right:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:106
+msgid "White color balance correction algorithm"
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:117
-msgid " Bottom left:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:114
+#: imageplugins/whitebalance/whitebalancetool.cpp:105
+msgid ""
+" You can see here the image's white-balance adjustments preview. You can "
+"pick color on image to see the color level corresponding on histogram."
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:119
-msgid " Bottom right:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:176
+#: imageplugins/whitebalance/whitebalancetool.cpp:170
+msgid ""
+" Here you can see the target preview image histogram drawing of the "
+"selected image channel. This one is re-computed at any filter settings "
+"changes."
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:126
-msgid "Draw preview while moving"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:190
+#: imageplugins/whitebalance/whitebalancetool.cpp:187
+msgid ""
+" Set here the white balance color temperature in Kelvin."
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:136
-#: utilities/imageeditor/editor/editortoolsettings.cpp:146
-msgid " Set here the color used to draw guides dashed-lines."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:198
+#: imageplugins/whitebalance/whitebalancetool.cpp:196
+msgid "Preset:"
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:140
-msgid "Guide width:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:200
+#: imageplugins/whitebalance/whitebalancetool.cpp:198
+msgid "Candle"
msgstr ""
-#: imageplugins/perspective/perspectivetool.cpp:144
-#: utilities/imageeditor/editor/editortoolsettings.cpp:150
-msgid " Set here the width in pixels used to draw guides dashed-lines."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:201
+#: imageplugins/whitebalance/whitebalancetool.cpp:199
+msgid "40W Lamp"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:81
-msgid "Template Superimpose"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:202
+#: imageplugins/whitebalance/whitebalancetool.cpp:200
+msgid "100W Lamp"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:91
-msgid " This is the preview of the template superimposed onto the image."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:203
+#: imageplugins/whitebalance/whitebalancetool.cpp:201
+msgid "200W Lamp"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:103
-#: utilities/lighttable/lighttablepreview.cpp:378
-#: utilities/lighttable/lighttablewindow.cpp:539
-msgid "Zoom in"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:204
+#: imageplugins/whitebalance/whitebalancetool.cpp:202
+msgid "Sunrise"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:109
-#: utilities/lighttable/lighttablepreview.cpp:379
-#: utilities/lighttable/lighttablewindow.cpp:544
-msgid "Zoom out"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:205
+#: imageplugins/whitebalance/whitebalancetool.cpp:203
+msgid "Studio Lamp"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:140
-msgid "Root Directory..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:206
+#: imageplugins/whitebalance/whitebalancetool.cpp:204
+msgid "Moonlight"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:141
-msgid " Set here the current templates' root directory."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:207
+#: imageplugins/whitebalance/whitebalancetool.cpp:205
+msgid "Neutral"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:233
-msgid "Select Template Root Directory to Use"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:208
+#: imageplugins/whitebalance/whitebalancetool.cpp:206
+msgid "Daylight D50"
msgstr ""
-#: imageplugins/superimpose/superimposetool.cpp:262
-msgid "Super Impose"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:209
+#: imageplugins/whitebalance/whitebalancetool.cpp:207
+msgid "Photo Flash"
msgstr ""
-#: imageplugins/superimpose/imageplugin_superimpose.cpp:49
-msgid "Template Superimpose..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:210
+#: imageplugins/whitebalance/whitebalancetool.cpp:208
+msgid "Sun"
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:82
-msgid "Hue / Saturation / Lightness"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:211
+#: imageplugins/whitebalance/whitebalancetool.cpp:209
+msgid "Xenon Lamp"
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:92
-msgid ""
-" Here you can see the image Hue/Saturation/Lightness adjustments preview. You "
-"can pick color on image to see the color level corresponding on histogram."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:212
+#: imageplugins/whitebalance/whitebalancetool.cpp:210
+msgid "Daylight D65"
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:169
-msgid " Select the hue and saturation adjustments of the image here."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:214
+#: imageplugins/whitebalance/whitebalancetool.cpp:213
+msgid ""
+" Select the white balance color temperature preset to use here:"
+" Candle: candle light (1850K). 40W Lamp: 40 Watt "
+"incandescent lamp (2680K). 100W Lamp: 100 Watt incandescent lamp "
+"(2800K). 200W Lamp: 200 Watt incandescent lamp (3000K)."
+" Sunrise: sunrise or sunset light (3200K). Studio Lamp: "
+"tungsten lamp used in photo studio or light at 1 hour from dusk/dawn (3400K)."
+" Moonlight: moon light (4100K). Neutral: neutral color "
+"temperature (4750K). Daylight D50: sunny daylight around noon "
+"(5000K). Photo Flash: electronic photo flash (5500K). Sun: "
+"effective sun temperature (5770K). Xenon Lamp: xenon lamp or light "
+"arc (6420K). Daylight D65: overcast sky light (6500K). None"
+"b>: no preset value."
+msgstr ""
+
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:236
+#: imageplugins/whitebalance/whitebalancetool.cpp:235
+msgid "Temperature tone color picker."
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:174
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:237
+#: imageplugins/whitebalance/whitebalancetool.cpp:236
msgid ""
-" You can see here a color preview of the hue and saturation adjustments."
+" With this button, you can pick the color from original image used to set "
+"white color balance temperature and green component."
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:179
-msgid "Hue:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:245
+#: imageplugins/whitebalance/whitebalancetool.cpp:244
+msgid "Black point:"
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:184
-msgid " Set here the hue adjustment of the image."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:249
+#: imageplugins/whitebalance/whitebalancetool.cpp:249
+msgid " Set here the black level value."
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:193
-msgid " Set here the saturation adjustment of the image."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:251
+#: imageplugins/whitebalance/whitebalancetool.cpp:251
+msgid "Shadows:"
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:197
-msgid "Lightness:"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:255
+#: imageplugins/whitebalance/whitebalancetool.cpp:256
+msgid " Set here the shadows noise suppresion level."
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:202
-msgid " Set here the lightness adjustment of the image."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:261
+#: imageplugins/whitebalance/whitebalancetool.cpp:263
+msgid " Set here the saturation value."
msgstr ""
-#: imageplugins/coreplugin/hsl/hsltool.cpp:448
-msgid "HSL Adjustments"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:267
+#: imageplugins/whitebalance/whitebalancetool.cpp:270
+msgid " Set here the gamma correction value."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:68
-msgid "Blur..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:273
+#: imageplugins/whitebalance/whitebalancetool.cpp:277
+msgid ""
+" Set here the green component to set magenta color cast removal level."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:72
-msgid "Sharpen..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:280
+#: imageplugins/whitebalance/whitebalancetool.cpp:284
+msgid ""
+" With this button, you can automatically adjust Exposure and Black Point "
+"values."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:82
-msgid "Brightness/Contrast/Gamma..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:291
+#: imageplugins/whitebalance/whitebalancetool.cpp:296
+msgid " Set here the main exposure compensation value in E.V."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:86
-msgid "Hue/Saturation/Lightness..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:293
+#: imageplugins/whitebalance/whitebalancetool.cpp:298
+msgid "Fine:"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:91
-msgid "Color Balance..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:297
+#: imageplugins/whitebalance/whitebalancetool.cpp:303
+msgid ""
+" This value in E.V will be added to main exposure compensation value to "
+"set fine exposure adjustment."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:96
-msgid "Auto-Correction..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:685
+#: imageplugins/whitebalance/whitebalancetool.cpp:97
+#: imageplugins/whitebalance/whitebalancetool.cpp:690
+msgid "White Balance"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:101
-#: imageplugins/coreplugin/imageplugin_core.cpp:213
-msgid "Invert"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:773
+#: imageplugins/whitebalance/whitebalancetool.cpp:783
+msgid "White Color Balance Settings File to Load"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:114
-msgid "Color Management..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:786
+#: imageplugins/whitebalance/whitebalancetool.cpp:796
+msgid "\"%1\" is not a White Color Balance settings text file."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:120
-msgid "Black && White..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:806
+#: imageplugins/whitebalance/whitebalancetool.cpp:816
+msgid "Cannot load settings from the White Color Balance text file."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:127
-msgid "Aspect Ratio Crop..."
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:816
+#: imageplugins/whitebalance/whitebalancetool.cpp:825
+msgid "White Color Balance Settings File to Save"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:232
-msgid "Red-Eye Correction Tool"
+#: imageplugins/whitebalance/imageeffect_whitebalance.cpp:836
+#: imageplugins/whitebalance/whitebalancetool.cpp:845
+msgid "Cannot save settings to the White Color Balance text file."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:233
-msgid ""
-"You need to select a region including the eyes to use the red-eye correction "
-"tool"
+#: imageplugins/whitebalance/imageplugin_whitebalance.cpp:48
+msgid "White Balance..."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:263
-msgid "This image is already using a depth of 8 bits / color / pixel."
+#: libs/dialogs/ctrlpaneldlg.cpp:100 libs/dialogs/imageguidedlg.cpp:135
+#: utilities/batch/batchalbumssyncmetadata.cpp:80
+#: utilities/batch/batchthumbsgenerator.cpp:84
+msgid "&Abort"
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:270
-msgid ""
-"Performing this operation will reduce image color quality. Do you want to "
-"continue?"
+#: libs/dialogs/ctrlpaneldlg.cpp:101 libs/dialogs/imagedlgbase.cpp:103
+#: libs/dialogs/imageguidedlg.cpp:136
+#: utilities/imageeditor/tools/imageresize.cpp:151
+msgid "&Save As..."
msgstr ""
-#: imageplugins/coreplugin/imageplugin_core.cpp:288
-msgid "This image is already using a depth of 16 bits / color / pixel."
+#: libs/dialogs/ctrlpaneldlg.cpp:102 libs/dialogs/imagedlgbase.cpp:104
+#: libs/dialogs/imageguidedlg.cpp:137
+#: utilities/imageeditor/tools/imageresize.cpp:152
+msgid "&Load..."
msgstr ""
-#: imageplugins/coreplugin/rgbtool.cpp:80
-#: imageplugins/coreplugin/rgbtool.cpp:435
-msgid "Color Balance"
+#: libs/dialogs/ctrlpaneldlg.cpp:115 libs/dialogs/imagedlgbase.cpp:115
+#: libs/dialogs/imageguidedlg.cpp:150
+#: utilities/imageeditor/tools/imageresize.cpp:158
+msgid " Reset all filter parameters to their default values."
msgstr ""
-#: imageplugins/coreplugin/rgbtool.cpp:86
-msgid ""
-" Here you can see the image color-balance adjustments preview. You can pick "
-"color on image to see the color level corresponding on histogram."
+#: libs/dialogs/ctrlpaneldlg.cpp:116 libs/dialogs/imageguidedlg.cpp:151
+msgid " Abort the current image rendering."
msgstr ""
-#: imageplugins/coreplugin/rgbtool.cpp:162
-msgid "Cyan"
+#: libs/dialogs/ctrlpaneldlg.cpp:117 libs/dialogs/imagedlgbase.cpp:116
+#: libs/dialogs/imageguidedlg.cpp:152
+#: utilities/imageeditor/tools/imageresize.cpp:159
+msgid " Load all filter parameters from settings text file."
msgstr ""
-#: imageplugins/coreplugin/rgbtool.cpp:167
-msgid " Set here the cyan/red color adjustment of the image."
+#: libs/dialogs/ctrlpaneldlg.cpp:118 libs/dialogs/imagedlgbase.cpp:117
+#: libs/dialogs/imageguidedlg.cpp:153
+#: utilities/imageeditor/tools/imageresize.cpp:160
+msgid " Save all filter parameters to settings text file."
msgstr ""
-#: imageplugins/coreplugin/rgbtool.cpp:181
-msgid "Magenta"
+#: libs/dialogs/ctrlpaneldlg.cpp:186 libs/dialogs/imagedlgbase.cpp:222
+#: libs/dialogs/imageguidedlg.cpp:337
+msgid "digiKam Handbook"
msgstr ""
-#: imageplugins/coreplugin/rgbtool.cpp:186
-msgid " Set here the magenta/green color adjustment of the image."
+#: libs/dialogs/deletedialog.cpp:115
+msgid ""
+" Set here the yellow/blue color adjustment of the image."
+#: libs/dialogs/deletedialog.cpp:126
+#, c-format
+msgid ""
+"_n: 1 file selected.\n"
+"%n files selected."
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:78
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:654
-msgid "Sharpen"
+#: libs/dialogs/deletedialog.cpp:135
+msgid ""
+" Select the sharpening method to apply to the image."
+#: libs/dialogs/deletedialog.cpp:185 libs/dialogs/deletedialog.cpp:299
+msgid "About to delete selected files"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:121
-msgid ""
-" A sharpness of 0 has no effect, 1 and above determine the sharpen matrix "
-"radius that determines how much to sharpen the image."
+#: libs/dialogs/deletedialog.cpp:192
+msgid "&Move to Trash"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:142
-msgid ""
-" Radius value is the gaussian blur matrix radius value used to determines how "
-"much to blur the image."
+#: libs/dialogs/deletedialog.cpp:304
+msgid "About to delete selected albums"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:145
-msgid "Amount:"
+#: libs/dialogs/iccprofileinfodlg.cpp:39
+msgid "Color Profile Info"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:150
-msgid ""
-" The value of the difference between the original and the blur image that is "
-"added back into the original."
+#: libs/dialogs/imagedialog.cpp:171
+#: libs/imageproperties/cameraitempropertiestab.cpp:461
+#: libs/imageproperties/imagepropertiestab.cpp:413
+msgid "unavailable"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:158
-msgid ""
-" The threshold, as a fraction of the maximum luminosity value, needed to "
-"apply the difference amount."
+#: libs/dialogs/imagedialog.cpp:201
+msgid "Aperture:"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:178
-msgid "Circular sharpness:"
+#: libs/dialogs/imagedialog.cpp:202
+msgid "Focal:"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:183
+#: libs/dialogs/imagedialog.cpp:203
+msgid "Exposure:"
+msgstr ""
+
+#: libs/dialogs/imagedialog.cpp:284 libs/dialogs/imagedialog.cpp:293
msgid ""
-" This is the radius of the circular convolution. It is the most important "
-"parameter for using this plugin. For most images the default value of 1.0 "
-"should give good results. Select a higher value when your image is very "
-"blurred."
+"\n"
+"%1|Camera RAW files"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:187
-msgid "Correlation:"
+#: libs/dialogs/imagedialog.cpp:308
+msgid "Select an Image"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:192
-msgid ""
-" Increasing the correlation may help to reduce artifacts. The correlation can "
-"range from 0-1. Useful values are 0.5 and values close to 1, e.g. 0.95 and "
-"0.99. Using a high value for the correlation will reduce the sharpening effect "
-"of the plugin."
+#: libs/dialogs/imagedialog.cpp:316
+msgid "Select Images"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:197
-msgid "Noise filter:"
+#: libs/dialogs/imagedlgbase.cpp:240 libs/dialogs/imageguidedlg.cpp:252
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:250
+#: utilities/cameragui/cameraui.cpp:351
+msgid "Settings"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:202
+#: libs/dialogs/imageguidedlg.cpp:175
msgid ""
-" Increasing the noise filter parameter may help to reduce artifacts. The "
-"noise filter can range from 0-1 but values higher than 0.1 are rarely helpful. "
-"When the noise filter value is too low, e.g. 0.0 the image quality will be very "
-"poor. A useful value is 0.01. Using a high value for the noise filter will "
-"reduce the sharpening effect of the plugin."
+" This is the the image filter effect preview. If you move the mouse cursor "
+"on this area, a vertical and horizontal dashed line will be draw to guide "
+"you in adjusting the filter settings. Press the left mouse button to freeze "
+"the dashed line's position."
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:208
-msgid "Gaussian sharpness:"
+#: libs/dialogs/imageguidedlg.cpp:182
+msgid " This is the image filter effect preview."
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:213
+#: libs/dialogs/imageguidedlg.cpp:241
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:214
msgid ""
-" This is the sharpness for the gaussian convolution. Use this parameter when "
-"your blurring is of a Gaussian type. In most cases you should set this "
-"parameter to 0, because it causes nasty artifacts. When you use non-zero "
-"values, you will probably have to increase the correlation and/or noise filter "
-"parameters too."
+" This is the percentage of the task which has been completed up to this "
+"point."
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:218
-msgid "Matrix size:"
+#: libs/dialogs/rawcameradlg.cpp:77
+msgid "List of supported RAW cameras"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:222
+#: libs/dialogs/rawcameradlg.cpp:107
msgid ""
-" This parameter determines the size of the transformation matrix. Increasing "
-"the matrix width may give better results, especially when you have chosen large "
-"values for circular or gaussian sharpness."
-msgstr ""
-
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:660
-msgid "Unsharp Mask"
+" Using KDcraw library version %1 Using Dcraw program version %2 %3 "
+"models in the list"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:683
-msgid "Photograph Refocus Settings File to Load"
+#: libs/dialogs/rawcameradlg.cpp:112
+msgid ""
+" Using KDcraw library version %1 Using LibRaw version %2 %3 models in "
+"the list"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:695
-msgid "\"%1\" is not a Photograph Refocus settings text file."
+#: libs/dimg/loaders/jp2ksettings.cpp:74
+msgid "Lossless JPEG 2000 files"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:710
-msgid "Cannot load settings from the Photograph Refocus text file."
+#: libs/dimg/loaders/jp2ksettings.cpp:76
+msgid ""
+" Toggle lossless compression for JPEG 2000 images. If you enable this "
+"option, you will use a lossless method to compress JPEG 2000 pictures. "
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:719
-msgid "Photograph Refocus Settings File to Save"
+#: libs/dimg/loaders/jp2ksettings.cpp:82
+msgid "JPEG 2000 quality:"
msgstr ""
-#: imageplugins/coreplugin/sharpnesseditor/sharpentool.cpp:736
-msgid "Cannot save settings to the Photograph Refocus text file."
+#: libs/dimg/loaders/jp2ksettings.cpp:84
+msgid ""
+" The quality value for JPEG 2000 images: 1: low quality (high "
+"compression and small file size) 50: medium quality 75: "
+"good quality (default) 100: high quality (no compression and large "
+"file size) Note: JPEG 2000 is not a lossless image compression format "
+"when you use this setting."
msgstr ""
-#: imageplugins/coreplugin/bcgtool.cpp:81
-msgid "Brightness / Contrast / Gamma"
+#: libs/dimg/loaders/jpegsettings.cpp:82
+msgid "JPEG quality:"
msgstr ""
-#: imageplugins/coreplugin/bcgtool.cpp:88
+#: libs/dimg/loaders/jpegsettings.cpp:84
msgid ""
-" Here you can see the image brightness-contrast-gamma adjustments preview. "
-"You can pick color on image to see the color level corresponding on histogram."
+" The JPEG image quality: 1: low quality (high compression and "
+"small file size) 50: medium quality 75: good quality "
+"(default) 100: high quality (no compression and large file "
+"size) Note: JPEG always uses lossy compression."
msgstr ""
-#: imageplugins/coreplugin/bcgtool.cpp:164
-#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:284
-msgid " Set here the brightness adjustment of the image."
+#: libs/dimg/loaders/jpegsettings.cpp:93
+msgid ""
+" Set here the contrast adjustment of the image."
+#: libs/dimg/loaders/jpegsettings.cpp:103
+msgid "Chroma subsampling:"
msgstr ""
-#: imageplugins/coreplugin/bcgtool.cpp:177
-msgid " Set here the gamma adjustment of the image."
+#: libs/dimg/loaders/jpegsettings.cpp:107
+msgid "Medium"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:78
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:847
-msgid "Aspect Ratio Crop"
+#: libs/dimg/loaders/jpegsettings.cpp:108
+msgid "High"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:86
+#: libs/dimg/loaders/jpegsettings.cpp:109
msgid ""
-" Here you can see the aspect ratio selection preview used for cropping. You "
-"can use the mouse to move and resize the crop area. Press and hold the CTRL key "
-"to move the opposite corner too. Press and hold the SHIFT key to move the "
-"closest corner to the mouse pointer."
+" JPEG Chroma subsampling level \n"
+"(color is saved with less resolution than luminance): None=best: "
+"uses 4:4:4 ratio. Does not employ chroma subsampling at all. This preserves "
+"edges and contrasting colors, whilst adding no additional "
+"compression Medium: uses 4:2:2 ratio. Medium compression: reduces "
+"the color resolution by one-third with little to no visual "
+"difference High: use 4:1:1 ratio. High compression: suits images "
+"with soft edges but tends to alter colors Note: JPEG always uses lossy "
+"compression."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:110
-msgid "Max. Aspect"
+#: libs/dimg/loaders/pngsettings.cpp:72
+msgid "PNG compression:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:113
+#: libs/dimg/loaders/pngsettings.cpp:74
msgid ""
-" Set selection area to the maximum size according to the current ratio."
+" The compression value for PNG images: 1: low compression (large "
+"file size but short compression duration - default) 5: medium "
+"compression 9: high compression (small file size but long "
+"compression duration) Note: PNG is always a lossless image compression "
+"format."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:125
-msgid "Ratio:"
+#: libs/dimg/loaders/tiffsettings.cpp:67
+msgid "Compress TIFF files"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:129
+#: libs/dimg/loaders/tiffsettings.cpp:69
msgid ""
-" Select your constrained aspect ratio for cropping. Aspect Ratio Crop tool "
-"uses a relative ratio. That means it is the same if you use centimeters or "
-"inches and it doesn't specify the physical size."
-" You can see below a correspondence list of traditional photographic paper "
-"sizes and aspect ratio crop:"
-" 2:3: 10x15cm, 20x30cm, 30x45cm, 4x6\", 8x12\", 12x18\", 16x24\", "
-"20x30\""
-" 3:4: 6x8cm, 15x20cm, 18x24cm, 30x40cm, 3.75x5\", 4.5x6\", 6x8\", "
-"7.5x10\", 9x12\""
-" 4:5: 20x25cm, 40x50cm, 8x10\", 16x20\""
-" 5:7: 15x21cm, 30x42cm, 5x7\""
-" 7:10: 21x30cm, 42x60cm, 3.5x5\""
-" The Golden Ratio is 1:1.618. A composition following this rule is "
-"considered visually harmonious but can be unadapted to print on standard "
-"photographic paper."
+" Toggle compression for TIFF images. If you enable this option, you can "
+"reduce the final file size of the TIFF image. A lossless compression "
+"format (Deflate) is used to save the file. "
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:146
-msgid "Exact"
+#: libs/greycstoration/greycstorationwidget.cpp:140
+msgid "Detail preservation:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:147
-msgid " Enable this option to force exact aspect ratio crop."
+#: libs/greycstoration/greycstorationwidget.cpp:144
+msgid ""
+" Preservation of details to set the sharpening level of the small features "
+"in the target image. Higher values leave details sharp."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:149
-msgid "Orientation:"
+#: libs/greycstoration/greycstorationwidget.cpp:150
+msgid "Anisotropy:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:154
-msgid " Select constrained aspect ratio orientation."
+#: libs/greycstoration/greycstorationwidget.cpp:154
+msgid ""
+" Anisotropic (directional) modifier of the details. Keep it small for "
+"Gaussian noise."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:156
-msgid "Auto"
+#: libs/greycstoration/greycstorationwidget.cpp:159
+msgid "Smoothing:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:157
-msgid " Enable this option to automatically set the orientation."
+#: libs/greycstoration/greycstorationwidget.cpp:163
+msgid ""
+" Total smoothing power: if the Detail Factor sets the relative smoothing "
+"and the Anisotropy Factor the direction, the Smoothing Factor sets the "
+"overall effect."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:161
-msgid "Custom:"
+#: libs/greycstoration/greycstorationwidget.cpp:169
+msgid "Regularity:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:166
-msgid " Set here the desired custom aspect numerator value."
+#: libs/greycstoration/greycstorationwidget.cpp:173
+msgid ""
+" This value controls the evenness of smoothing to the image. Do not use a "
+"high value here, or the target image will be completely blurred."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:173
-msgid " Set here the desired custom aspect denominator value."
+#: libs/greycstoration/greycstorationwidget.cpp:179
+msgid "Iterations:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:178
-msgid "X:"
+#: libs/greycstoration/greycstorationwidget.cpp:182
+msgid " Sets the number of times the filter is applied to the image."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:181
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:203
-msgid " Set here the top left selection corner position for cropping."
+#: libs/greycstoration/greycstorationwidget.cpp:187
+msgid "Noise:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:184
-#: utilities/imageeditor/tools/imageresize.cpp:180
-msgid "Width:"
+#: libs/greycstoration/greycstorationwidget.cpp:191
+msgid " Sets the noise scale."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:189
-msgid " Set here the width selection for cropping."
+#: libs/greycstoration/greycstorationwidget.cpp:200
+#: utilities/setup/setupicc.cpp:296
+msgid "Advanced Settings"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:195
-msgid " Set width position to center."
+#: libs/greycstoration/greycstorationwidget.cpp:202
+msgid "Angular step:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:200
-msgid "Y:"
+#: libs/greycstoration/greycstorationwidget.cpp:206
+msgid ""
+" Set here the angular integration step (in degrees) analogous to "
+"anisotropy."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:206
-#: utilities/imageeditor/tools/imageresize.cpp:187
-msgid "Height:"
+#: libs/greycstoration/greycstorationwidget.cpp:211
+msgid "Integral step:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:211
-msgid " Set here the height selection for cropping."
+#: libs/greycstoration/greycstorationwidget.cpp:215
+msgid " Set here the spatial integral step."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:217
-msgid " Set height position to center."
+#: libs/greycstoration/greycstorationwidget.cpp:219
+msgid "Gaussian:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:244
-msgid "Composition guide:"
+#: libs/greycstoration/greycstorationwidget.cpp:223
+msgid " Set here the precision of the Gaussian function."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:246
-msgid "Rules of Thirds"
+#: libs/greycstoration/greycstorationwidget.cpp:227
+msgid "Tile size:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:247
-msgid "Diagonal Method"
+#: libs/greycstoration/greycstorationwidget.cpp:230
+msgid " Sets the tile size."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:248
-msgid "Harmonious Triangles"
+#: libs/greycstoration/greycstorationwidget.cpp:234
+msgid "Tile border:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:249
-msgid "Golden Mean"
+#: libs/greycstoration/greycstorationwidget.cpp:237
+msgid " Sets the size of each tile border."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:252
-msgid ""
-" With this option, you can display guide lines which help you to compose your "
-"photograph."
+#: libs/greycstoration/greycstorationwidget.cpp:241
+msgid "Interpolation:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:255
-msgid "Golden sections"
+#: libs/greycstoration/greycstorationwidget.cpp:243
+msgid "Nearest Neighbor"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:256
-msgid " Enable this option to show golden sections."
+#: libs/greycstoration/greycstorationwidget.cpp:245
+msgid "Runge-Kutta"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:258
-msgid "Golden spiral sections"
+#: libs/greycstoration/greycstorationwidget.cpp:246
+msgid " Select the right interpolation method for the desired image quality."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:259
-msgid " Enable this option to show golden spiral sections."
+#: libs/greycstoration/greycstorationwidget.cpp:251
+msgid "Fast approximation"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:261
-msgid "Golden spiral"
+#: libs/greycstoration/greycstorationwidget.cpp:252
+msgid " Enable fast approximation when rendering images."
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:262
-msgid " Enable this option to show golden spiral guide."
+#: libs/imageproperties/cameraitempropertiestab.cpp:182
+msgid "Camera File Properties"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:264
-msgid "Golden triangles"
+#: libs/imageproperties/cameraitempropertiestab.cpp:183
+#: libs/imageproperties/imagepropertiestab.cpp:198
+msgid "File:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:265
-msgid " Enable this option to show golden triangles."
+#: libs/imageproperties/cameraitempropertiestab.cpp:184
+#: libs/imageproperties/imagepropertiestab.cpp:199
+msgid "Folder:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:267
-msgid "Flip horizontally"
+#: libs/imageproperties/cameraitempropertiestab.cpp:185
+msgid "Date:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:268
-msgid " Enable this option to flip horizontally guidelines."
+#: libs/imageproperties/cameraitempropertiestab.cpp:186
+#: libs/imageproperties/imagepropertiestab.cpp:201
+msgid "Size:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:270
-msgid "Flip vertically"
+#: libs/imageproperties/cameraitempropertiestab.cpp:187
+msgid "Readable:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:271
-msgid " Enable this option to flip vertically guidelines."
+#: libs/imageproperties/cameraitempropertiestab.cpp:188
+msgid "Writable:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:273
-msgid "Color and width:"
+#: libs/imageproperties/cameraitempropertiestab.cpp:189
+#: libs/imageproperties/imagepropertiestab.cpp:207
+msgid "Type:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:278
-msgid " Set here the color used to draw composition guides."
+#: libs/imageproperties/cameraitempropertiestab.cpp:190
+#: libs/imageproperties/imagepropertiestab.cpp:208
+msgid "Dimensions:"
msgstr ""
-#: imageplugins/coreplugin/ratiocrop/ratiocroptool.cpp:279
-msgid " Set here the width in pixels used to draw composition guides."
+#: libs/imageproperties/cameraitempropertiestab.cpp:191
+msgid " A smoothness of 0 has no effect, 1 and above determine the Gaussian blur "
-"matrix radius that determines how much to blur the image."
+#: libs/imageproperties/cameraitempropertiestab.cpp:198
+#: libs/imageproperties/imagepropertiestab.cpp:217
+msgid "Created:"
msgstr ""
-#: imageplugins/coreplugin/blurtool.cpp:161
-msgid "Gaussian Blur"
+#: libs/imageproperties/cameraitempropertiestab.cpp:199
+#: libs/imageproperties/imagepropertiestab.cpp:218
+msgid "Aperture:"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:116
-msgid ""
-" Here you can see the image preview after applying a color profile Select the histogram channel to display here:"
-" Luminosity: display the image's luminosity values."
-" Red: display the red channel values."
-" Green: display the green channel values."
-" Blue: display the blue channel values."
-" "
+#: libs/imageproperties/cameraitempropertiestab.cpp:202
+#: libs/imageproperties/imagepropertiestab.cpp:221
+msgid "Sensitivity:"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:181
-msgid ""
-" Here you can see the target preview image histogram of the selected image "
-"channel. This one is updated after setting changes."
+#: libs/imageproperties/cameraitempropertiestab.cpp:203
+#: libs/imageproperties/imagepropertiestab.cpp:222
+msgid " Here you can set general parameters. Rendering emulation of the device described by the \"Proofing\" profile. "
-"Useful to preview the final result without rendering to physical medium. You can use this option if you want to show the colors that are outside the "
-"printer's gamut"
-" "
+#: libs/imageproperties/cameraitempropertiestab.cpp:385
+#: libs/imageproperties/cameraitempropertiestab.cpp:394
+#: libs/imageproperties/cameraitempropertiestab.cpp:452
+#: libs/imageproperties/imagepropertiescolorstab.cpp:753
+msgid "Yes"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:222
-msgid "Assign profile"
+#: libs/imageproperties/cameraitempropertiestab.cpp:447
+msgid "unchanged"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:223
-msgid ""
-" You can use this option to embed the selected workspace color profile into "
-"the image. The Black Point Compensation (BPC) feature does work in conjunction with "
-"Relative Colorimetric Intent. Perceptual intent should make no difference, "
-"since BPC is always on, and in Absolute Colorimetric Intent it is always turned "
-"off. BPC does compensate for a lack of ICC profiles in the dark tone rendering. "
-"With BPC the dark tones are optimally mapped (no clipping) from original media "
-"to the destination rendering media, e.g. the combination of paper and ink. Set here all parameters relevant of Input Color Profiles. You have edited the comment of the image. \n"
+" You have edited the comment of %n images. "
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:310
-#: imageplugins/coreplugin/iccprooftool.cpp:353
-#: imageplugins/coreplugin/iccprooftool.cpp:387
-msgid "Use selected profile"
+#: libs/imageproperties/imagedescedittab.cpp:413
+#, c-format
+msgid ""
+"_n: You have edited the date of the image. \n"
+" You have edited the date of %n images. "
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:319
-#: imageplugins/coreplugin/iccprooftool.cpp:362
-#: imageplugins/coreplugin/iccprooftool.cpp:396
-#: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:83
-#: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:86
-#: utilities/setup/setupicc.cpp:232 utilities/setup/setupicc.cpp:250
-#: utilities/setup/setupicc.cpp:266 utilities/setup/setupicc.cpp:283
-msgid "Info..."
+#: libs/imageproperties/imagedescedittab.cpp:417
+#, c-format
+msgid ""
+"_n: You have edited the rating of the image. \n"
+" You have edited the rating of %n images. "
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:321
-msgid "Camera information"
+#: libs/imageproperties/imagedescedittab.cpp:421
+#, c-format
+msgid ""
+"_n: You have edited the tags of the image. \n"
+" You have edited the tags of %n images. "
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:339
-msgid "Workspace Profile"
+#: libs/imageproperties/imagedescedittab.cpp:424
+#: libs/imageproperties/imagedescedittab.cpp:443
+msgid "Do you want to apply your changes? Set here all parameters relevant to Color Workspace Profiles. You have edited the metadata of the image: You have edited the metadata of %n images: Set here all parameters relevant to Proofing Color Profiles. Set here all lightness adjustments to the target image. This is the curve adjustment of the image luminosity"
+#: libs/imageproperties/imagedescedittab.cpp:576
+msgid "Reading metadata from files. Please wait..."
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:563
-msgid ""
-"The ICC profiles path seems to be invalid. You won't be able to use the "
-"\"Default profile\" options."
-" Please fix this in the digiKam ICC setup."
+#: libs/imageproperties/imagedescedittab.cpp:605
+msgid "Writing metadata to files. Please wait..."
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:758
-msgid ""
-" The selected ICC input profile path seems to be invalid."
-" Please check it."
+#: libs/imageproperties/imagedescedittab.cpp:1035
+msgid "No AddressBook Entries Found"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:777
-#: imageplugins/coreplugin/iccprooftool.cpp:939
-msgid ""
-" The selected ICC proof profile path seems to be invalid."
-" Please check it."
+#: libs/imageproperties/imagedescedittab.cpp:1046
+msgid "Read metadata from file to database"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:799
-#: imageplugins/coreplugin/iccprooftool.cpp:961
-msgid ""
-" Selected ICC workspace profile path seems to be invalid."
-" Please check it."
+#: libs/imageproperties/imagedescedittab.cpp:1047
+#: libs/imageproperties/imagedescedittab.cpp:1060
+msgid "Write metadata to each file"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:837
-msgid ""
-" Your settings are not sufficient. To apply a color transform, you need at least two ICC profiles: If you want to do a \"soft-proof\" transform, in addition to these profiles "
-"you need a \"Proof\" profile. Selected ICC input profile path seems to be invalid."
-" Please check it."
-msgstr ""
-
-#: imageplugins/coreplugin/iccprooftool.cpp:1049
-msgid " You have selected the \"Default builtin sRGB profile\" This profile is built on the fly, so there is no relevant information about "
-"it. You have not enabled Color Management in the digiKam preferences. Select the histogram channel to display here: Luminosity: "
+"Display luminosity (perceived brightness) values. Red: Display the "
+"red image channel. Green: Display the green image channel."
+" Blue: Display the blue image channel. Alpha: Display the "
+"alpha image channel. This channel corresponds to the transparency value and "
+"is supported by some image formats such as PNG or TIFF. Colors: "
+"Display all color channel values at the same time."
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:1121
-msgid " \"Use of default profile\" options will be disabled now. Select the main color displayed with Colors Channel mode here: Red"
+"b>: Draw the red image channel in the foreground. Green: Draw the "
+"green image channel in the foreground. Blue: Draw the blue image "
+"channel in the foreground. "
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:1204
-msgid "\"%1\" is not a Color Management settings text file."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:229
+msgid ""
+" Select from which region the histogram will be computed here: Full "
+"Image: Compute histogram using the full image. Selection: "
+"Compute histogram using the current image selection."
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:1257
-msgid "Cannot load settings from the Color Management text file."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:235
+msgid " Full Image"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:1268
-msgid "Color Management Settings File to Save"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:243
+msgid " Selection"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:1305
-msgid "Cannot save settings to the Color Management text file."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:254
+msgid " This is the histogram drawing of the selected image channel"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:83
-msgid "Red Eye"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:264
+msgid "Range:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:90
-msgid ""
-" Here you can see the image selection preview with red eye reduction applied."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:268
+msgid " Select the minimal intensity value of the histogram selection here."
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:110
-msgid ""
-" Select the histogram channel to display here:"
-" Luminosity: display the image's luminosity values."
-" Red: display the red image channel values."
-" Green: display the green image channel values."
-" Blue: display the blue image channel values."
-" "
+#: libs/imageproperties/imagepropertiescolorstab.cpp:272
+msgid " Select the maximal intensity value of the histogram selection here."
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:120
-msgid ""
-" Select the histogram scale here."
-" If the image's maximum counts are small, you can use the linear scale."
-" The logarithmic scale can be used when the maximal counts are big to show "
-"all values (small and large) on the graph."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:280
+msgid "Statistics"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:151
+#: libs/imageproperties/imagepropertiescolorstab.cpp:281
msgid ""
-" Here you can see the target preview image histogram of the selected image "
-"channel. It is updated upon setting changes."
+" Here you can see the statistical results calculated from the selected "
+"histogram part. These values are available for all channels."
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:165
-msgid ""
-" Sets the red color pixels selection threshold. Low values will select more "
-"red color pixels (agressive correction), high values less (mild correction). "
-"Use low value if eye have been selected exactly. Use high value if other parts "
-"of the face are also selected."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:285
+#: libs/widgets/common/histogramwidget.cpp:951
+msgid "Pixels:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:174
-msgid ""
-" Sets the smoothness value when blurring the border of the changed pixels. "
-"This leads to a more naturally looking pupil."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:290
+#: libs/widgets/common/histogramwidget.cpp:959
+msgid "Count:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:178
-msgid "Coloring Tint:"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:295
+#: libs/widgets/common/histogramwidget.cpp:947
+msgid "Mean:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:183
-msgid " Sets a custom color to re-colorize the eyes."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:300
+msgid "Std. deviation:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:185
-msgid "Tint Level:"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:305
+#: libs/widgets/common/histogramwidget.cpp:963
+msgid "Median:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:189
-msgid ""
-" Set the tint level to adjust the luminosity of the new color of the pupil."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:310
+msgid "Percentile:"
msgstr ""
-#: imageplugins/coreplugin/redeyetool.cpp:403
-msgid "Red Eyes Correction"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:315
+msgid "Color depth:"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:165
-msgid "Black && White"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:320
+msgid "Alpha Channel:"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:178
-msgid ""
-" Here you can see the black and white conversion tool preview. You can pick "
-"color on image to see the color level corresponding on histogram."
+#: libs/imageproperties/imagepropertiescolorstab.cpp:337
+msgid "Histogram"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:266
-msgid "Generic"
+#: libs/imageproperties/imagepropertiescolorstab.cpp:348
+msgid "ICC profile"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:267
-msgid "Generic: Simulate a generic black and white film Simulate the Agfa 200X black and white film at 200 ISO Simulate the Agfa Pan black and white film at 25 ISO Simulate the Agfa Pan black and white film at 100 ISO Simulate the Agfa Pan black and white film at 400 ISO Simulate the Ilford Delta black and white film at 100 ISO Simulate the Ilford Delta black and white film at 400 ISO Simulate the Ilford Delta 400 Pro black and white film at 3200 ISO Simulate the Ilford FP4 Plus black and white film at 125 ISO Simulate the Ilford HP5 Plus black and white film at 400 ISO Simulate the Ilford PanF Plus black and white film at 50 ISO Simulate the Ilford XP2 Super black and white film at 400 ISO Simulate the Kodak Tmax black and white film at 100 ISO Simulate the Kodak Tmax black and white film at 400 ISO Simulate the Kodak TriX black and white film at 400 ISO Do not apply a lens filter when rendering the image. Simulate black and white film exposure using a green filter. This is usefule "
-"for all scenic shoots, especially portraits photographed against the sky. Simulate black and white film exposure using an orange filter. This will "
-"enhance landscapes, marine scenes and aerial photography. Simulate black and white film exposure using a red filter. This creates "
-"dramatic sky effects, and simulates moonlight scenes in the daytime. Simulate black and white film exposure using a yellow filter. This has the "
-"most natural tonal correction, and improves contrast. Ideal for landscapes. Here, set the strength adjustment of the lens filter."
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:136
+msgid "Raw information about the ICC profile manufacturer"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:401
-msgid "No Tone Filter"
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:137
+#: utilities/setup/setupcamera.cpp:88
+msgid "Model"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:402
-msgid "No Tone Filter: Do not apply a tone filter to the image. Gives a warm highlight and mid-tone while adding a bit of coolness to the "
-"shadows - very similar to the process of bleaching a print and re-developing in "
-"a sepia toner. This filter is more neutral than the Sepia Tone filter. Start subtle and replicates printing on a cold tone black and white paper "
-"such as a bromide enlarging paper. This effect replicates traditional selenium chemical toning done in the "
-"darkroom. This effect replicates traditional platinum chemical toning done in the "
-"darkroom. This effect is also known as Verdante. This area contains a CIE or chromaticity diagram. A CIE diagram is a "
+"representation of all the colors that a person with normal vision can see. "
+"This is represented by the colored sail-shaped area. In addition you will "
+"see a triangle that is superimposed on the diagram outlined in white. This "
+"triangle represents the outer boundaries of the color space of the device "
+"that is characterized by the inspected profile. This is called the device "
+"gamut. In addition there are black dots and yellow lines on the diagram. "
+"Each black dot represents one of the measurement points that were used to "
+"create this profile. The yellow line represents the amount that each point "
+"is corrected by the profile, and the direction of this correction."
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:1068
-msgid "Black & White Settings File to Load"
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:201
+msgid "ICC Color Profile Information"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:1081
-msgid "\"%1\" is not a Black & White settings text file."
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:289
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:322
+msgid "Lab"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:1133
-msgid "Cannot load settings from the Black & White text file."
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:292
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:325
+msgid "Luv"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:1144
-msgid "Black & White Settings File to Save"
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:295
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:328
+msgid "RGB"
msgstr ""
-#: imageplugins/coreplugin/bwsepiatool.cpp:1172
-msgid "Cannot save settings to the Black & White text file."
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:298
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:331
+msgid "GRAY"
msgstr ""
-#: imageplugins/coreplugin/autocorrectiontool.cpp:79
-msgid "Auto-Correction"
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:301
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:334
+msgid "HSV"
msgstr ""
-#: imageplugins/coreplugin/autocorrectiontool.cpp:86
-msgid ""
-" Here you can see the auto-color correction tool preview. You can pick color "
-"on image to see the color level corresponding on histogram."
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:304
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:337
+msgid "HLS"
msgstr ""
-#: imageplugins/coreplugin/autocorrectiontool.cpp:168
-#: imageplugins/coreplugin/autocorrectiontool.cpp:378
-msgid "Auto Levels"
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:307
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:340
+msgid "CMYK"
msgstr ""
-#: imageplugins/coreplugin/autocorrectiontool.cpp:169
-msgid ""
-"Auto Levels:"
-" This option maximizes the tonal range in the Red, Green, and Blue channels. "
-"It searches the image shadow and highlight limit values and adjusts the Red, "
-"Green, and Blue channels to a full histogram range. This option scales brightness values across the active image so that the "
-"darkest point becomes black, and the brightest point becomes as bright as "
-"possible without altering its hue. This is often a \"magic fix\" for images "
-"that are dim or washed out. This option adjusts the brightness of colors across the active image so that "
-"the histogram for the value channel is as nearly as possible flat, that is, so "
-"that each possible brightness value appears at about the same number of pixels "
-"as each other value. Sometimes Equalize works wonderfully at enhancing the "
-"contrasts in an image. Other times it gives garbage. It is a very powerful "
-"operation, which can either work miracles on an image or destroy it. This option enhances the contrast and brightness of the RGB values of an "
-"image by stretching the lowest and highest values to their fullest range, "
-"adjusting everything in between. This option enhances the contrast and brightness of the RGB values of an "
-"image to calculate optimal exposition and black level using image histogram "
-"properties. This is the shear operation preview. If you move the mouse cursor on this "
-"preview, a vertical and horizontal dashed line will be drawn to guide you in "
-"adjusting the shear correction. Release the left mouse button to freeze the "
-"dashed line's position."
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:394
+msgid "Absolute Colorimetric"
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:104
-msgid "Main horizontal angle:"
+#: libs/widgets/iccprofiles/iccprofilewidget.cpp:434
+msgid "ICC color profile File to Save"
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:108
-msgid " The main horizontal shearing angle, in degrees."
+#: libs/widgets/imageplugins/imageguidewidget.cpp:245
+#: libs/widgets/imageplugins/imageguidewidget.cpp:330
+#: libs/widgets/imageplugins/imageguidewidget.cpp:395
+#: libs/widgets/imageplugins/imageregionwidget.cpp:233
+#: libs/widgets/imageplugins/imageregionwidget.cpp:268
+msgid "Original"
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:110
-msgid "Fine horizontal angle:"
+#: libs/widgets/imageplugins/imageguidewidget.cpp:263
+#: libs/widgets/imageplugins/imageguidewidget.cpp:321
+#: libs/widgets/imageplugins/imageguidewidget.cpp:386
+#: libs/widgets/imageplugins/imageregionwidget.cpp:224
+#: libs/widgets/imageplugins/imageregionwidget.cpp:259
+msgid "Target"
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:114
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:96
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:128
msgid ""
-" This value in degrees will be added to main horizontal angle value to set "
-"fine adjustments."
+" Here you can see the original clip image which will be used for the "
+"preview computation. Click and drag the mouse cursor in the image to "
+"change the clip focus."
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:117
-msgid "Main vertical angle:"
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:119
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:159
+msgid ""
+" If you enable this option, you will separate the preview area "
+"horizontally, displaying the original and target image at the same time. The "
+"target is duplicated from the original below the red dashed line."
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:121
-msgid " The main vertical shearing angle, in degrees."
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:130
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:170
+msgid ""
+" If you enable this option, you will separate the preview area vertically, "
+"displaying the original and target image at the same time. The target is "
+"duplicated from the original to the right of the red dashed line."
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:123
-msgid "Fine vertical angle:"
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:145
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:185
+msgid ""
+" If you enable this option, you will separate the preview area "
+"horizontally, displaying the original and target image at the same time. The "
+"original is above the red dashed line, the target below it."
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:127
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:156
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:196
msgid ""
-" This value in degrees will be added to main vertical angle value to set fine "
-"adjustments."
+" If you enable this option, you will separate the preview area vertically, "
+"displaying the original and target image at the same time. The original is "
+"to the left of the red dashed line, the target to the right of it."
msgstr ""
-#: imageplugins/sheartool/sheartool.cpp:131
-msgid ""
-" Enable this option to apply the anti-aliasing filter to the sheared image. "
-"To smooth the target image, it will be blurred a little."
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:168
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:208
+msgid " If you enable this option, the preview area will not be separated."
msgstr ""
-#: imageplugins/lensdistortion/imageplugin_lensdistortion.cpp:47
-msgid "Lens Distortion..."
+#: libs/widgets/imageplugins/imagepanelwidget.cpp:330
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:472
+msgid " Here set the zoom factor of the preview area."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:94
+#: libs/widgets/imageplugins/imagepannelwidget.cpp:241
+#: utilities/imageeditor/editor/editortoolsettings.cpp:125
msgid ""
-" You can see here a thumbnail preview of the distortion correction applied to "
-"a cross pattern."
+" Here you can see the original image panel which can help you to select "
+"the clip preview. Click and drag the mouse cursor in the red rectangle to "
+"change the clip focus."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:105
-msgid ""
-" This value controls the amount of distortion. Negative values correct lens "
-"barrel distortion, while positive values correct lens pincushion distortion."
+#: libs/widgets/imageplugins/imagewidget.cpp:105
+msgid " If you enable this option, you will see the original image."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:110
-msgid "Edge:"
+#: libs/widgets/imageplugins/imagewidget.cpp:114
+msgid ""
+" If you enable this option, the preview area will split vertically. A "
+"contiguous area of the image will be shown, with one half from the original "
+"image, the other half from the target image."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:116
+#: libs/widgets/imageplugins/imagewidget.cpp:126
msgid ""
-" This value controls in the same manner as the Main control, but has more "
-"effect at the edges of the image than at the center."
+" If you enable this option, the preview area will split horizontally. A "
+"contiguous area of the image will be shown, with one half from the original "
+"image, the other half from the target image."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:121
-msgid "Zoom:"
+#: libs/widgets/imageplugins/imagewidget.cpp:138
+msgid ""
+" If you enable this option, the preview area will split vertically. The "
+"same part of the original and the target image will be shown side by side."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:127
-msgid " This value rescales the overall image size."
+#: libs/widgets/imageplugins/imagewidget.cpp:149
+msgid ""
+" If you enable this option, the preview area will split horizontally. The "
+"same part of the original and the target image will be shown side by side."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:131
-msgid "Brighten:"
+#: libs/widgets/imageplugins/imagewidget.cpp:160
+msgid " If you enable this option, you will see the target image."
msgstr ""
-#: imageplugins/lensdistortion/lensdistortiontool.cpp:137
-msgid " This value adjusts the brightness in image corners."
+#: libs/widgets/imageplugins/imagewidget.cpp:169
+msgid ""
+" If you enable this option, you will see the original image when the mouse "
+"is over image area, else the target image."
msgstr ""
-#: imageplugins/inpainting/imageplugin_inpainting.cpp:51
-msgid "Inpainting..."
+#: libs/widgets/imageplugins/imagewidget.cpp:183
+msgid ""
+" Set this option to display black overlaid on the preview. This will help "
+"you to avoid under-exposing the image."
msgstr ""
-#: imageplugins/inpainting/imageplugin_inpainting.cpp:56
+#: libs/widgets/imageplugins/imagewidget.cpp:191
msgid ""
-"This filter can be used to inpaint a part in a photo. Select a region to "
-"inpaint to use this option."
+" Set this option on display white overlaid on the preview. This will help "
+"you to avoid over-exposing the image."
msgstr ""
-#: imageplugins/inpainting/imageplugin_inpainting.cpp:84
-msgid "Inpainting Photograph Tool"
+#: libs/widgets/imageplugins/imagewidget.cpp:317
+msgid "(%1,%2) RGBA:%3,%4,%5,%6"
msgstr ""
-#: imageplugins/inpainting/imageplugin_inpainting.cpp:85
-msgid "You need to select a region to inpaint to use this tool"
+#: libs/widgets/metadata/exifwidget.cpp:102
+msgid "Standard EXIF Tags"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:89
-msgid "Inpainting"
+#: libs/widgets/metadata/exifwidget.cpp:173
+#: libs/widgets/metadata/gpswidget.cpp:313
+#: libs/widgets/metadata/iptcwidget.cpp:154
+#: libs/widgets/metadata/makernotewidget.cpp:198
+msgid "No description available"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:95
-msgid ""
-" Here you can see the image selection preview with inpainting applied."
+#: libs/widgets/metadata/exifwidget.cpp:180
+#: libs/widgets/metadata/gpswidget.cpp:335
+#: libs/widgets/metadata/makernotewidget.cpp:205
+msgid "EXIF File to Save"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:127
-msgid "Remove Small Artefact"
+#: libs/widgets/metadata/exifwidget.cpp:181
+#: libs/widgets/metadata/gpswidget.cpp:336
+#: libs/widgets/metadata/makernotewidget.cpp:206
+msgid "EXIF binary Files (*.exif)"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:128
-msgid "Remove Medium Artefact"
+#: libs/widgets/metadata/gpswidget.cpp:120
+msgid "More Info..."
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:129
-msgid "Remove Large Artefact"
+#: libs/widgets/metadata/gpswidget.cpp:220
+msgid "Global Positioning System Information"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:130
-msgid ""
-" Select the filter preset to use for photograph restoration:"
-" None: Most common values. Puts settings to default."
-" Remove Small Artefact: inpaint small image artefact like image "
-"glitch."
-" Remove Medium Artefact: inpaint medium image artefact."
-" Remove Large Artefact: inpaint image artefact like unwanted object."
-" "
+#: libs/widgets/metadata/iptcwidget.cpp:83
+msgid "IPTC Records"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:378
-msgid "InPainting"
+#: libs/widgets/metadata/iptcwidget.cpp:161
+msgid "IPTC File to Save"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:385
-msgid "Photograph Inpainting Settings File to Load"
+#: libs/widgets/metadata/iptcwidget.cpp:162
+msgid "IPTC binary Files (*.iptc)"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:396
-msgid "\"%1\" is not a Photograph Inpainting settings text file."
+#: libs/widgets/metadata/makernotewidget.cpp:127
+msgid "MakerNote EXIF Tags"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:403
-msgid "Cannot load settings from the Photograph Inpainting text file."
+#: libs/widgets/metadata/mdkeylistviewitem.cpp:50
+msgid "Interoperability"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:416
-msgid "Photograph Inpainting Settings File to Save"
+#: libs/widgets/metadata/mdkeylistviewitem.cpp:51
+msgid "Image Information"
msgstr ""
-#: imageplugins/inpainting/inpaintingtool.cpp:425
-msgid "Cannot save settings to the Photograph Inpainting text file."
+#: libs/widgets/metadata/mdkeylistviewitem.cpp:52
+#: showfoto/setup/setuptooltip.cpp:127 utilities/setup/setuptooltip.cpp:138
+msgid "Photograph Information"
msgstr ""
-#: tips.cpp:3
-msgid ""
-" \n"
-" \n"
-" \n"
-" \n"
-" \n"
-" %1 Value: %2 Description: %3"
msgstr ""
-#: tips.cpp:83
-msgid ""
-" \n"
-" \n"
-" \n"
-" \n"
-" \n"
-" \n"
-" \n"
-" \n"
-"
lossy compression"
-"
image format!\n"
-"
"
+#: digikam/albumiconview.cpp:1586
+msgid "Assign Tags to &All Items"
msgstr ""
-#: libs/imageproperties/imagedescedittab.cpp:433
-msgid "
Note that all subalbums are included in this list and will be "
-"deleted permanently as well.
Note that all subalbums are included in this list and will be moved "
-"to Trash as well.
Ex.: "
+"\"Country/City/Paris\"
Ex.: \"City/Paris, Monument/Notre-Dame"
+"\"
\"%1\"
\"%1\"Welcome to digiKam %1
"
-""
-"
\n"
-"%8\n"
-"\n"
-"%5
\n"
-"%6\n"
-"Welcome to digiKam
\n"
+"%5
\n"
+"%6\n"
+""
-"
Ex.: \"Country/City/Paris\"
Ex.: \"City/Paris, Monument/Notre-Dame\"
\"%1\"
\"%1\"
"
msgstr ""
-#: showfoto/setup/setup.cpp:110
-msgid "Save Images' Files' Settings"
+#: imageplugins/coreplugin/iccprooftool.cpp:276
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:262
+#: utilities/setup/setupicc.cpp:171
+msgid "Visit Little CMS project website"
msgstr ""
-#: showfoto/setup/setup.cpp:114 utilities/setup/setup.cpp:190
-msgid "Slide Show"
+#: imageplugins/coreplugin/iccprooftool.cpp:289
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:275
+msgid "Input Profile"
msgstr ""
-#: showfoto/setup/setup.cpp:114 utilities/setup/setup.cpp:190
-msgid "Slide Show Settings"
+#: imageplugins/coreplugin/iccprooftool.cpp:290
+#: imageplugins/coreplugin/imageeffect_iccproof.cpp:276
+msgid "
In other words, if certain colors in an image fall outside of the range "
+"of colors that the output device can render, the image intent will cause all "
+"the colors in the image to be adjusted so that every color in the image "
+"falls within the range that can be rendered and so that the relationship "
+"between colors is preserved as much as possible.
This intent is most "
+"suitable for display of photographs and images, and is the default intent."
+"li>
This "
+"intent preserves the white point and is most suitable for spot colors "
+"(Pantone, TruMatch, logo colors, ...).
Implementation of this intent remains somewhat problematic, and the ICC "
+"is still working on methods to achieve the desired effects.
This intent "
+"is most suitable for business graphics such as charts, where it is more "
+"important that the colors be vivid and contrast well with each other rather "
+"than a specific color.
Note that all subalbums are included in this list and will be "
+"deleted permanently as well.
Note that all subalbums "
+"are included in this list and will be moved to Trash as well.
lossy compression
image format!"
-"
"
+#: libs/imageproperties/imagedescedittab.cpp:196
+msgid "Recent Tags"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:276
-#: utilities/setup/setupicc.cpp:171
-msgid "Visit Little CMS project website"
+#: libs/imageproperties/imagedescedittab.cpp:211
+msgid "Revert all changes"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:289
-msgid "Input Profile"
+#: libs/imageproperties/imagedescedittab.cpp:214
+msgid "Apply"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:290
-msgid "
In other words, if certain colors in an image fall outside of the range of "
-"colors that the output device can render, the image intent will cause all the "
-"colors in the image to be adjusted so that every color in the image falls "
-"within the range that can be rendered and so that the relationship between "
-"colors is preserved as much as possible."
-"
This intent is most suitable for display of photographs and images, and is "
-"the default intent.
This intent preserves the white point and is most suitable for spot colors "
-"(Pantone, TruMatch, logo colors, ...).
Implementation of this intent remains somewhat problematic, and the ICC is "
-"still working on methods to achieve the desired effects."
-"
This intent is most suitable for business graphics such as charts, where it "
-"is more important that the colors be vivid and contrast well with each other "
-"rather than a specific color.\n"
+"
"
msgstr ""
-#: imageplugins/coreplugin/iccprooftool.cpp:350
-msgid "Use default workspace profile"
+#: libs/imageproperties/imagedescedittab.cpp:433
+msgid "
"
-"
"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that digiKam supports Drag'n'Drop? So you can easily move images "
-"from Konqueror to digiKam or from digiKam to K3b simply by using "
-"\"Drag'n'Drop\".\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that you can use nested albums in digiKam.\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that you can view the Exif, MakerNotes, and IPTC "
-"photo information by using the Metadata sidebar tab?\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that each photo has a context menu that can be reached by clicking on it "
-"with the right mouse button?\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that albums in digiKam are folders in your Album Library? So you can easily "
-"import your photos by simply copying them to your Album Library.\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that you can customize your digiKam toolbars using Settings -> "
-"Configure Toolbars...?\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that you can reach other users through the digiKam-users mailing list? "
-"Subscribe to it at this url.\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that digiKam has multiple plugins with extra features like "
-"HTML export, Archive to CD, Slideshow"
-",... and that you are welcome to write your own plugins? You can find more "
-"information at this url.\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-" \n"
-"... that you have direct access to the TDE Gamma Configuration using Tools -> "
-"Gamma Adjustment?\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that you can print images using the Print Wizard? You can start it using "
-"Album -> Export -> Print Wizard.\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-" \n"
-"\n"
-"... that you can use the PNG file format instead of TIFF "
-"for good compression without losing image quality?\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-" \n"
-"\n"
-"... that most of the settings in a dialog box have What's this? "
-"information available, which can be reached via the right mouse button?\n"
-" \n"
-"\n"
-"
\n"
-"\n"
-" \n"
-"\n"
-"\n"
-" \n"
-"\n"
-"... that because the PNG file format uses a lossless compression algorithm, you "
-"can use the max compression level with this file format?\n"
-" \n"
-"
\n" -"
\n" -"\n" -" | \n" -"\n" -"... that you can print the current image opened in the digiKam image editor?\n" -" | \n" -"
\n" -"
\n" -"\n" -" | \n" -"\n" -"... that you can edit the comments of the current image opened in the digiKam " -"image editor using Comments and Tags sidebar tab?\n" -" | \n" -"
\n" -"
\n" -"\n" -" | \n" -"\n" -"... that you could use <Page Down> and <Page Up> on your keyboard " -"to switch between photos in the image editor?\n" -" | \n" -"
File name: %1 (%2)" msgstr "" -#: utilities/batch/batchsyncmetadata.cpp:118 -msgid "Synchonizing images' Metadata with database. Please wait..." +#: showfoto/main.cpp:47 +msgid "File(s) or folder(s) to open" msgstr "" -#: utilities/batch/batchthumbsgenerator.cpp:82 -msgid "Thumbnails processing" +#: showfoto/main.cpp:58 +msgid "showFoto" msgstr "" -#: utilities/batch/batchthumbsgenerator.cpp:83 -msgid "Updating thumbnails database. Please wait..." +#: showfoto/setup/setup.cpp:88 utilities/setup/setup.cpp:136 +msgid "Configure" msgstr "" -#: utilities/batch/batchalbumssyncmetadata.cpp:80 -#: utilities/batch/batchthumbsgenerator.cpp:84 -msgid "&Abort" +#: showfoto/setup/setup.cpp:98 utilities/setup/setup.cpp:158 +msgid "Tool Tip" msgstr "" -#: utilities/batch/batchthumbsgenerator.cpp:102 -msgid "Processing small thumbs" +#: showfoto/setup/setup.cpp:98 +msgid "Thumbbar Items Tool Tip Settings" msgstr "" -#: utilities/batch/batchthumbsgenerator.cpp:111 -msgid "Processing large thumbs" +#: showfoto/setup/setup.cpp:102 utilities/setup/setup.cpp:178 +msgid "RAW decoding" msgstr "" -#: utilities/batch/batchthumbsgenerator.cpp:125 -msgid "The thumbnails database has been updated." +#: showfoto/setup/setup.cpp:102 utilities/setup/setup.cpp:178 +msgid "RAW Files Decoding Settings" msgstr "" -#: utilities/batch/batchalbumssyncmetadata.cpp:112 -#: utilities/batch/batchthumbsgenerator.cpp:126 -#, c-format -msgid "Duration: %1" +#: showfoto/setup/setup.cpp:106 +msgid "Color Management Settings" msgstr "" -#: utilities/batch/batchalbumssyncmetadata.cpp:78 -msgid "Sync All Images' Metadata" +#: showfoto/setup/setup.cpp:110 utilities/setup/setup.cpp:174 +msgid "Save Images" msgstr "" -#: utilities/batch/batchalbumssyncmetadata.cpp:79 -msgid "" -"Syncing the metadata of all images with the digiKam database. Please " -"wait..." +#: showfoto/setup/setup.cpp:110 +msgid "Save Images' Files' Settings" msgstr "" -#: utilities/batch/batchalbumssyncmetadata.cpp:92 -msgid "Parsing all albums" +#: showfoto/setup/setup.cpp:114 utilities/setup/setup.cpp:190 +msgid "Slide Show" msgstr "" -#: utilities/batch/batchalbumssyncmetadata.cpp:111 -msgid "" -"The metadata of all images has been synchronized with the digiKam " -"database." +#: showfoto/setup/setup.cpp:114 utilities/setup/setup.cpp:190 +msgid "Slide Show Settings" msgstr "" -#: utilities/setup/setuplighttable.cpp:77 -msgid "Synchronize panels automatically" +#: showfoto/setup/setupeditor.cpp:104 utilities/setup/setupeditor.cpp:84 +#: utilities/setup/setupgeneral.cpp:168 utilities/setup/setuplighttable.cpp:74 +msgid "Interface Options" msgstr "" -#: utilities/setup/setuplighttable.cpp:78 -msgid "" -"
Set this option to automatically synchronize zooming and panning between " -"left and right panels if the images have the same size." +#: showfoto/setup/setupeditor.cpp:106 utilities/setup/setupeditor.cpp:86 +msgid "&Use theme background color" msgstr "" -#: utilities/setup/setuplighttable.cpp:82 -msgid "Selecting a thumbbar item loads image to the right panel" +#: showfoto/setup/setupeditor.cpp:109 utilities/setup/setupeditor.cpp:88 +msgid "" +"
Enable this option to use background theme color in image editor area" msgstr "" -#: utilities/setup/setuplighttable.cpp:84 -msgid "" -"
Set this option to automatically load an image into the right panel when the " -"corresponding item is selected on the thumbbar." +#: showfoto/setup/setupeditor.cpp:113 utilities/setup/setupeditor.cpp:93 +msgid "&Background color:" msgstr "" -#: utilities/setup/setuplighttable.cpp:87 -msgid "Load full image size" +#: showfoto/setup/setupeditor.cpp:116 +msgid "
Select background color to use for image editor area." msgstr "" -#: utilities/setup/setuplighttable.cpp:88 -msgid "" -"
Set this option to load full image size into the preview panel instead of a " -"reduced size. Because this option will take more time to load images, use it " -"only if you have a fast computer." +#: showfoto/setup/setupeditor.cpp:119 utilities/setup/setupeditor.cpp:100 +#: utilities/setup/setuplighttable.cpp:92 +msgid "H&ide toolbar in fullscreen mode" msgstr "" -#: utilities/setup/setupmetadata.cpp:106 -msgid "IPTC Actions" +#: showfoto/setup/setupeditor.cpp:120 +msgid "Hide &thumbbar in fullscreen mode" msgstr "" -#: utilities/setup/setupmetadata.cpp:109 -msgid "&Save image tags as \"Keywords\" tag" +#: showfoto/setup/setupeditor.cpp:121 +msgid "Use &horizontal thumbbar (need to restart showFoto)" msgstr "" -#: utilities/setup/setupmetadata.cpp:110 +#: showfoto/setup/setupeditor.cpp:122 msgid "" -"
Turn this option on to store the image tags in the IPTC Keywords tag." +"
If this option is enabled, the thumbnails bar will be displayed " +"horizontally behind the image area. You need to restart showFoto for this " +"option take effect.
" msgstr "" -#: utilities/setup/setupmetadata.cpp:114 -msgid "&Save default photographer identity as tags" +#: showfoto/setup/setupeditor.cpp:124 +msgid "&Deleting items should move them to trash" msgstr "" -#: utilities/setup/setupmetadata.cpp:115 -msgid "" -"
Turn this option on to store the default photographer identity in the IPTC " -"tags. You can set this value in the Identity setup page." +#: showfoto/setup/setupeditor.cpp:125 utilities/setup/setupmisc.cpp:82 +msgid "&Show splash screen at startup" msgstr "" -#: utilities/setup/setupmetadata.cpp:120 -msgid "&Save default credit and copyright identity as tags" +#: showfoto/setup/setupeditor.cpp:127 utilities/setup/setupeditor.cpp:102 +msgid "Use Raw Import Tool to handle Raw image" msgstr "" -#: utilities/setup/setupmetadata.cpp:121 +#: showfoto/setup/setupeditor.cpp:128 utilities/setup/setupeditor.cpp:103 msgid "" -"
Turn this option on to store the default credit and copyright identity in " -"the IPTC tags. You can set this value in the Identity setup page." +"
Set on this option to use Raw Import tool before to load a Raw image, to " +"customize indeep decoding settings." msgstr "" -#: utilities/setup/setupmetadata.cpp:127 -msgid "Common Metadata Actions" +#: showfoto/setup/setupeditor.cpp:134 utilities/setup/setupeditor.cpp:109 +msgid "Exposure Indicators" msgstr "" -#: utilities/setup/setupmetadata.cpp:130 -msgid "&Save image captions as embedded text" +#: showfoto/setup/setupeditor.cpp:137 utilities/setup/setupeditor.cpp:112 +msgid "&Under-exposure color:" msgstr "" -#: utilities/setup/setupmetadata.cpp:131 +#: showfoto/setup/setupeditor.cpp:140 msgid "" -"
Turn this option on to store image captions in the JFIF section, EXIF tag, " -"and IPTC tag." +"
Customize color used in image editor to identify under-exposed pixels." msgstr "" -#: utilities/setup/setupmetadata.cpp:135 -msgid "&Save image timestamps as tags" +#: showfoto/setup/setupeditor.cpp:144 utilities/setup/setupeditor.cpp:119 +msgid "&Over-exposure color:" msgstr "" -#: utilities/setup/setupmetadata.cpp:136 +#: showfoto/setup/setupeditor.cpp:147 msgid "" -"
Turn this option on to store the image date and time in the EXIF and IPTC " -"tags." -msgstr "" - -#: utilities/setup/setupmetadata.cpp:140 -msgid "&Save image rating as tags" +"
Customize color used in image editor to identify over-exposed pixels." msgstr "" -#: utilities/setup/setupmetadata.cpp:141 -msgid "" -"
Turn this option on to store the image rating in the EXIF tag and IPTC " -"Urgency tag." +#: showfoto/setup/setupeditor.cpp:152 utilities/setup/setupmetadata.cpp:96 +msgid "EXIF Actions" msgstr "" -#: utilities/setup/setupmetadata.cpp:154 -msgid "Visit Exiv2 project website" +#: showfoto/setup/setupeditor.cpp:155 utilities/setup/setupmetadata.cpp:99 +msgid "Show images/thumbs &rotated according to orientation tag" msgstr "" -#: utilities/setup/setupmetadata.cpp:157 -msgid "" -"
EXIF " -"is a standard used by most digital cameras today to store technical " -"informations about photograph.
" -"IPTC " -"is an standard used in digital photography to store photographer informations " -"in pictures.
" +#: showfoto/setup/setupeditor.cpp:158 utilities/setup/setupmetadata.cpp:102 +msgid "Set orientation tag to normal after rotate/flip" msgstr "" -#: utilities/setup/setupplugins.cpp:78 -msgid "A list of available Kipi plugins appears below." +#: showfoto/setup/setupeditor.cpp:162 +msgid "Sort order for images" msgstr "" -#: utilities/setup/setupplugins.cpp:95 -#, c-format -msgid "" -"_n: 1 Kipi plugin found\n" -"%n Kipi plugins found" +#: showfoto/setup/setupeditor.cpp:165 +msgid "Sort images by:" msgstr "" -#: utilities/setup/setupslideshow.cpp:84 -msgid "&Delay between images:" +#: showfoto/setup/setupeditor.cpp:167 +msgid "File Date" msgstr "" -#: utilities/setup/setupslideshow.cpp:85 -msgid "
The delay, in seconds, between images." +#: showfoto/setup/setupeditor.cpp:168 +msgid "File Name" msgstr "" -#: utilities/setup/setupslideshow.cpp:87 -msgid "Start with current image" +#: showfoto/setup/setupeditor.cpp:169 +msgid "File size" msgstr "" -#: utilities/setup/setupslideshow.cpp:88 +#: showfoto/setup/setupeditor.cpp:170 msgid "" -"
If this option is enabled, slideshow will be started with currently selected " -"image." +"
Here, select whether newly-loaded images are sorted by file-date, file-" +"name, or file-size." msgstr "" -#: utilities/setup/setupslideshow.cpp:91 -msgid "Display in a loop" -msgstr "" - -#: utilities/setup/setupslideshow.cpp:92 -msgid "
Run the slideshow in endless repetition." -msgstr "" - -#: utilities/setup/setupslideshow.cpp:94 -msgid "Print image file name" +#: showfoto/setup/setupeditor.cpp:173 +msgid "Reverse ordering" msgstr "" -#: utilities/setup/setupslideshow.cpp:95 -msgid "
Print the image file name at the bottom of the screen." +#: showfoto/setup/setupeditor.cpp:174 +msgid "" +"
If this option is enabled, newly-loaded images will be sorted in " +"descending order." msgstr "" -#: utilities/setup/setupslideshow.cpp:97 -msgid "Print image creation date" +#: showfoto/setup/setuptooltip.cpp:98 +msgid "Show Thumbbar items toolti&ps" msgstr "" -#: utilities/setup/setupslideshow.cpp:98 -msgid "
Print the image creation time/date at the bottom of the screen." +#: showfoto/setup/setuptooltip.cpp:99 +msgid "" +"
Set this option to display image information when the mouse hovers over a " +"thumbbar item." msgstr "" -#: utilities/setup/setupslideshow.cpp:100 -msgid "Print camera aperture and focal length" +#: showfoto/setup/setuptooltip.cpp:106 utilities/setup/setuptooltip.cpp:117 +msgid "File/Image Information" msgstr "" -#: utilities/setup/setupslideshow.cpp:101 -msgid "" -"
Print the camera aperture and focal length at the bottom of the screen." +#: showfoto/setup/setuptooltip.cpp:108 utilities/setup/setuptooltip.cpp:119 +msgid "Show file name" msgstr "" -#: utilities/setup/setupslideshow.cpp:103 -msgid "Print camera exposure and sensitivity" +#: showfoto/setup/setuptooltip.cpp:109 utilities/setup/setuptooltip.cpp:120 +msgid "
Set this option to display the image file name." msgstr "" -#: utilities/setup/setupslideshow.cpp:104 -msgid "" -"
Print the camera exposure and sensitivity at the bottom of the screen." +#: showfoto/setup/setuptooltip.cpp:111 utilities/setup/setuptooltip.cpp:122 +msgid "Show file date" msgstr "" -#: utilities/setup/setupslideshow.cpp:106 -msgid "Print camera make and model" +#: showfoto/setup/setuptooltip.cpp:112 utilities/setup/setuptooltip.cpp:123 +msgid "
Set this option to display the image file date." msgstr "" -#: utilities/setup/setupslideshow.cpp:107 -msgid "
Print the camera make and model at the bottom of the screen." +#: showfoto/setup/setuptooltip.cpp:114 utilities/setup/setuptooltip.cpp:125 +msgid "Show file size" msgstr "" -#: utilities/setup/setupslideshow.cpp:109 -msgid "Print image caption" +#: showfoto/setup/setuptooltip.cpp:115 utilities/setup/setuptooltip.cpp:126 +msgid "
Set this option to display the image file size." msgstr "" -#: utilities/setup/setupslideshow.cpp:110 -msgid "
Print the image caption at the bottom of the screen." +#: showfoto/setup/setuptooltip.cpp:117 utilities/setup/setuptooltip.cpp:128 +msgid "Show image type" msgstr "" -#: utilities/setup/setupmime.cpp:94 -msgid "Show only &image files with extensions:" +#: showfoto/setup/setuptooltip.cpp:118 utilities/setup/setuptooltip.cpp:129 +msgid "
Set this option to display the image type." msgstr "" -#: utilities/setup/setupmime.cpp:98 -msgid "" -"
Here you can set the extensions of image files to be displayed in Albums " -"(such as JPEG or TIFF); clicking on these files will open them in the digiKam " -"Image Editor." +#: showfoto/setup/setuptooltip.cpp:120 utilities/setup/setuptooltip.cpp:131 +msgid "Show image dimensions" msgstr "" -#: utilities/setup/setupmime.cpp:107 utilities/setup/setupmime.cpp:138 -#: utilities/setup/setupmime.cpp:169 utilities/setup/setupmime.cpp:199 -msgid "Revert to default settings" +#: showfoto/setup/setuptooltip.cpp:121 utilities/setup/setuptooltip.cpp:132 +msgid "
Set this option to display the image dimensions in pixels." msgstr "" -#: utilities/setup/setupmime.cpp:125 -msgid "Show only &movie files with extensions:" +#: showfoto/setup/setuptooltip.cpp:129 utilities/setup/setuptooltip.cpp:140 +msgid "Show camera make and model" msgstr "" -#: utilities/setup/setupmime.cpp:129 +#: showfoto/setup/setuptooltip.cpp:130 utilities/setup/setuptooltip.cpp:141 msgid "" -"
Here you can set the extensions of movie files to be displayed in Albums " -"(such as MPEG or AVI); clicking on these files will open them with the default " -"TDE movie player." +"
Set this option to display the make and model of the camera with which " +"the image has been taken." msgstr "" -#: utilities/setup/setupmime.cpp:156 -msgid "Show only &audio files with extensions:" +#: showfoto/setup/setuptooltip.cpp:133 utilities/setup/setuptooltip.cpp:144 +msgid "Show camera date" msgstr "" -#: utilities/setup/setupmime.cpp:160 -msgid "" -"
Here you can set the extensions of audio files to be displayed in Albums " -"(such as MP3 or OGG); clicking on these files will open them with the default " -"TDE audio player." +#: showfoto/setup/setuptooltip.cpp:134 utilities/setup/setuptooltip.cpp:145 +msgid "
Set this option to display the date when the image was taken." msgstr "" -#: utilities/setup/setupmime.cpp:187 -msgid "Show only &RAW files with extensions:" +#: showfoto/setup/setuptooltip.cpp:136 +msgid "Show camera aperture and focal length" msgstr "" -#: utilities/setup/setupmime.cpp:191 +#: showfoto/setup/setuptooltip.cpp:137 utilities/setup/setuptooltip.cpp:148 msgid "" -"
Here you can set the extensions of RAW image files to be displayed in Albums " -"(such as CRW, for Canon cameras, or NEF, for Nikon cameras)." +"
Set this option to display the camera aperture and focal settings used to " +"take the image." msgstr "" -#: utilities/setup/setupmisc.cpp:72 -msgid "Show confirmation dialog when moving items to the &trash" +#: showfoto/setup/setuptooltip.cpp:140 utilities/setup/setuptooltip.cpp:151 +msgid "Show camera exposure and sensitivity" msgstr "" -#: utilities/setup/setupmisc.cpp:77 -msgid "Apply changes in the &right sidebar without confirmation" +#: showfoto/setup/setuptooltip.cpp:141 utilities/setup/setuptooltip.cpp:152 +msgid "" +"
Set this option to display the camera exposure and sensitivity used to " +"take the image." msgstr "" -#: utilities/setup/setupmisc.cpp:87 -msgid "&Scan for new items on startup (slows down startup)" +#: showfoto/setup/setuptooltip.cpp:144 utilities/setup/setuptooltip.cpp:155 +msgid "Show camera mode and program" msgstr "" -#: utilities/setup/setupidentity.cpp:81 -msgid "Photographer and Copyright Information" +#: showfoto/setup/setuptooltip.cpp:145 utilities/setup/setuptooltip.cpp:156 +msgid "" +"
Set this option to display the camera mode and program used to take the " +"image." msgstr "" -#: utilities/setup/setupidentity.cpp:84 -msgid "Author:" +#: showfoto/setup/setuptooltip.cpp:148 utilities/setup/setuptooltip.cpp:159 +msgid "Show camera flash settings" msgstr "" -#: utilities/setup/setupidentity.cpp:91 +#: showfoto/setup/setuptooltip.cpp:149 utilities/setup/setuptooltip.cpp:160 msgid "" -"
This field should contain your name, or the name of the person who created " -"the photograph. If it is not appropriate to add the name of the photographer " -"(for example, if the identify of the photographer needs to be protected) the " -"name of a company or organization can also be used. Once saved, this field " -"should not be changed by anyone. This field does not support the use of commas " -"or semi-colons as separator. \n" -"This field is limited to 32 ASCII characters.
" +"Set this option to display the camera flash settings used to take the " +"image." msgstr "" -#: utilities/setup/setupidentity.cpp:97 -msgid "Author Title:" +#: showfoto/setup/setuptooltip.cpp:152 utilities/setup/setuptooltip.cpp:163 +msgid "Show camera white balance settings" msgstr "" -#: utilities/setup/setupidentity.cpp:104 +#: showfoto/setup/setuptooltip.cpp:153 utilities/setup/setuptooltip.cpp:164 msgid "" -"
This field should contain the job title of the photographer. Examples might " -"include titles such as: Staff Photographer, Freelance Photographer, or " -"Independent Commercial Photographer. Since this is a qualifier for the Author " -"field, the Author field must also be filled out. \n" -"This field is limited to 32 ASCII characters.
" +"Set this option to display the camera white balance settings used to take " +"the image." msgstr "" -#: utilities/setup/setupidentity.cpp:111 -msgid "Credit and Copyright" +#: showfoto/showfoto.cpp:214 +msgid "Brightness/Contrast/Gamma" msgstr "" -#: utilities/setup/setupidentity.cpp:114 -msgid "Credit:" +#: showfoto/showfoto.cpp:217 +msgid "Increase Gamma" msgstr "" -#: utilities/setup/setupidentity.cpp:121 -msgid "" -"
(synonymous to Provider): Use the Provider field to identify who is " -"providing the photograph. This does not necessarily have to be the author. If a " -"photographer is working for a news agency such as Reuters or the Associated " -"Press, these organizations could be listed here as they are \"providing\" the " -"image for use by others. If the image is a stock photograph, then the group " -"(agency) involved in supplying the image should be listed here. \n" -"This field is limited to 32 ASCII characters.
" +#: showfoto/showfoto.cpp:220 +msgid "Decrease Gamma" msgstr "" -#: utilities/setup/setupidentity.cpp:128 -msgid "Source:" +#: showfoto/showfoto.cpp:223 +msgid "Increase Brightness" msgstr "" -#: utilities/setup/setupidentity.cpp:135 -msgid "" -"The Source field should be used to identify the original owner or copyright " -"holder of the photograph. The value of this field should never be changed after " -"the information is entered following the image's creation. While not yet " -"enforced by the custom panels, you should consider this to be a \"write-once\" " -"field. The source could be an individual, an agency, or a member of an agency. " -"To aid in later searches, it is suggested to separate any slashes \"/\" with a " -"blank space. Use the form \"photographer / agency\" rather than " -"\"photographer/agency.\" Source may also be different from Creator and from the " -"names listed in the Copyright Notice.\n" -"This field is limited to 32 ASCII characters.
" +#: showfoto/showfoto.cpp:226 +msgid "Decrease Brightness" msgstr "" -#: utilities/setup/setupidentity.cpp:144 -msgid "Copyright:" +#: showfoto/showfoto.cpp:229 +msgid "Increase Contrast" msgstr "" -#: utilities/setup/setupidentity.cpp:151 -msgid "" -"The Copyright Notice should contain any necessary copyright notice for " -"claiming the intellectual property, and should identify the current owner(s) of " -"the copyright for the photograph. Usually, this would be the photographer, but " -"if the image was done by an employee or as work-for-hire, then the agency or " -"company should be listed. Use the form appropriate to your country. USA: © " -"{date of first publication} name of copyright owner, as in \"©2005 John " -"Doe.\" Note, the word \"copyright\" or the abbreviation \"copr\" may be used in " -"place of the © symbol. In some foreign countries only the copyright symbol " -"is recognized and the abbreviation does not work. Furthermore the copyright " -"symbol must be a full circle with a \"c\" inside; using something like (c) " -"where the parentheses form a partial circle is not sufficient. For additional " -"protection worldwide, use of the phrase, \"all rights reserved\" following the " -"notice above is encouraged. \n" -"In Europe you would use: Copyright {Year} {Copyright owner}, all rights " -"reserved. \n" -"In Japan, for maximum protection, the following three items should appear in " -"the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of the " -"first publication; and (c) name of the author. You may also wish to include the " -"phrase \"all rights reserved.\"\n" -"This field is limited to 128 ASCII characters.
" +#: showfoto/showfoto.cpp:232 +msgid "Decrease Contrast" msgstr "" -#: utilities/setup/setupidentity.cpp:169 +#: showfoto/showfoto.cpp:362 msgid "" -"Note: These informations are used to set IPTC " -"tags contents. IPTC text tags only support the printable " -"ASCII " -"characters set and limit strings size. Use contextual help for details." +"The ICC profile path seems to be invalid.
If you want to set it " +"now, select \"Yes\", otherwise select \"No\". In this case, \"Color " +"Management\" feature will be disabled until you solve this issue
You can add or remove Album collection types here to improve how your Albums " -"are sorted in digiKam." +#: showfoto/showfoto.cpp:484 +msgid "Open folder" msgstr "" -#: utilities/setup/setupcamera.cpp:103 -#: utilities/setup/setupcollections.cpp:100 -msgid "&Add..." +#: showfoto/showfoto.cpp:496 +msgid "Show Thumbnails" msgstr "" -#: utilities/setup/setupcollections.cpp:180 -#: utilities/setup/setupcollections.cpp:185 -msgid "New Collection Name" +#: showfoto/showfoto.cpp:565 +msgid "Delete File" msgstr "" -#: utilities/setup/setupcollections.cpp:181 -#: utilities/setup/setupcollections.cpp:186 -msgid "Enter new collection name:" +#: showfoto/showfoto.cpp:792 utilities/imageeditor/editor/imagewindow.cpp:719 +msgid " (%2 of %3)" msgstr "" -#: utilities/setup/setupeditor.cpp:97 -msgid "
Customize background color to use in image editor area." +#: showfoto/showfoto.cpp:904 +msgid "There are no images in this folder." msgstr "" -#: utilities/setup/setupeditor.cpp:115 -msgid "" -"
Customize the color used in image editor to identify under-exposed pixels." +#: showfoto/showfoto.cpp:926 +msgid "Open Images From Folder" msgstr "" -#: utilities/setup/setupeditor.cpp:122 +#: showfoto/showfoto.cpp:1104 msgid "" -"
Customize the color used in image editor to identify over-exposed pixels." +"About to delete file \"%1\"\n" +"Are you sure?" msgstr "" -#: utilities/setup/setupcamera.cpp:87 -msgid "Title" +#: showfoto/showfoto.cpp:1108 utilities/cameragui/cameraui.cpp:1472 +#: utilities/imageeditor/editor/editorwindow.cpp:1173 +msgid "Warning" msgstr "" -#: utilities/setup/setupcamera.cpp:89 -msgid "Port" +#: showfoto/showfoto.cpp:1205 utilities/imageeditor/editor/imagewindow.cpp:1065 +#: utilities/imageeditor/editor/imagewindow.cpp:1095 +#: utilities/lighttable/lighttablewindow.cpp:1290 +msgid "Preparing slideshow. Please wait..." msgstr "" -#: utilities/setup/setupcamera.cpp:90 -msgid "Path" +#: tdeioslave/digikamalbums.cpp:486 tdeioslave/digikamalbums.cpp:942 +#: tdeioslave/digikamalbums.cpp:952 tdeioslave/digikamalbums.cpp:1212 +#: tdeioslave/digikamalbums.cpp:1240 +msgid "Source album %1 not found in database" msgstr "" -#: utilities/setup/setupcamera.cpp:93 +#: tdeioslave/digikamalbums.cpp:580 tdeioslave/digikamalbums.cpp:836 +#, c-format msgid "" -"
Here you can see the digital camera list used by digiKam via the Gphoto " -"interface." -msgstr "" - -#: utilities/setup/setupcamera.cpp:107 -msgid "&Edit..." +"Could not change permissions for\n" +"%1" msgstr "" -#: utilities/setup/setupcamera.cpp:109 -msgid "Auto-&Detect" +#: tdeioslave/digikamalbums.cpp:880 +msgid "" +"Source and Destination have different Album Library Paths.\n" +"Source: %1\n" +"Destination: %2" msgstr "" -#: utilities/setup/setupcamera.cpp:122 -msgid "Visit Gphoto project website" +#: tdeioslave/digikamalbums.cpp:960 +msgid "Destination album %1 not found in database" msgstr "" -#: utilities/setup/setupcamera.cpp:245 +#: tdeioslave/digikamalbums.cpp:979 msgid "" -"Failed to auto-detect camera.\n" -"Please check if your camera is turned on and retry or try setting it manually." +"This file/folder is on a different filesystem through symlinks. Moving/" +"Renaming files between them is currently unsupported " msgstr "" -#: utilities/setup/setupcamera.cpp:257 -msgid "Camera '%1' (%2) is already in list." +#: tdeioslave/digikamalbums.cpp:1765 +msgid "Source image %1 not found in database" msgstr "" -#: utilities/setup/setupcamera.cpp:261 -msgid "Found camera '%1' (%2) and added it to the list." +#: tdeioslave/digikamthumbnail.cpp:125 +msgid "No or invalid size specified" msgstr "" -#: utilities/setup/setup.cpp:142 -msgid "Album Settings" +#: tdeioslave/digikamthumbnail.cpp:143 +msgid "File does not exist" msgstr "" -#: utilities/setup/setup.cpp:146 -msgid "Collections" +#: tdeioslave/digikamthumbnail.cpp:181 +#, c-format +msgid "Cannot create thumbnail for %1" msgstr "" -#: utilities/setup/setup.cpp:146 -msgid "Album Collections" +#: themedesigner/main.cpp:46 +msgid "Document to open." msgstr "" -#: utilities/setup/setup.cpp:150 -msgid "Identity" +#: themedesigner/main.cpp:53 themedesigner/mainwindow.cpp:69 +msgid "digiKam Theme Designer" msgstr "" -#: utilities/setup/setup.cpp:150 -msgid "Default IPTC identity information" +#: themedesigner/themedicongroupitem.cpp:79 +msgid "Album Banner" msgstr "" -#: utilities/setup/setup.cpp:154 -msgid "Embedded Image Information Management" +#: themedesigner/themedicongroupitem.cpp:93 +msgid "July 2007 - 10 Items" msgstr "" -#: utilities/setup/setup.cpp:158 -msgid "Album Items Tool Tip Settings" +#: themedesigner/themediconitem.cpp:153 +msgid "Photo caption" msgstr "" -#: utilities/setup/setup.cpp:162 -msgid "Mime Types" +#: themedesigner/themediconitem.cpp:170 +msgid "Events, Places, Vacation" msgstr "" -#: utilities/setup/setup.cpp:162 -msgid "File (MIME) Types Settings" +#: utilities/batch/batchalbumssyncmetadata.cpp:78 +msgid "Sync All Images' Metadata" msgstr "" -#: utilities/setup/setup.cpp:166 -msgid "Light Table Settings" +#: utilities/batch/batchalbumssyncmetadata.cpp:79 +msgid "" +"Syncing the metadata of all images with the digiKam database. Please " +"wait..." msgstr "" -#: utilities/imageeditor/editor/imagewindow.cpp:449 -#: utilities/setup/setup.cpp:170 -msgid "Image Editor" +#: utilities/batch/batchalbumssyncmetadata.cpp:92 +msgid "Parsing all albums" msgstr "" -#: utilities/setup/setup.cpp:170 -msgid "Image Editor General Settings" +#: utilities/batch/batchalbumssyncmetadata.cpp:111 +msgid "" +"The metadata of all images has been synchronized with the digiKam " +"database." msgstr "" -#: utilities/setup/setup.cpp:174 -msgid "Image Editor: Settings for Saving Images Files" +#: utilities/batch/batchalbumssyncmetadata.cpp:112 +#: utilities/batch/batchthumbsgenerator.cpp:126 +#, c-format +msgid "Duration: %1" msgstr "" -#: utilities/setup/setup.cpp:182 -msgid "Image Editor Color Management Settings" +#: utilities/batch/batchalbumssyncmetadata.cpp:113 +#: utilities/batch/batchthumbsgenerator.cpp:127 +msgid "&Close" msgstr "" -#: utilities/setup/setup.cpp:186 -msgid "Kipi Plugins" +#: utilities/batch/batchsyncmetadata.cpp:118 +msgid "Synchonizing images' Metadata with database. Please wait..." msgstr "" -#: utilities/setup/setup.cpp:186 -msgid "Main Interface Plug-in Settings" +#: utilities/batch/batchthumbsgenerator.cpp:82 +msgid "Thumbnails processing" msgstr "" -#: utilities/setup/setup.cpp:194 -msgid "Cameras" +#: utilities/batch/batchthumbsgenerator.cpp:83 +msgid "Updating thumbnails database. Please wait..." msgstr "" -#: utilities/setup/setup.cpp:194 -msgid "Camera Settings" +#: utilities/batch/batchthumbsgenerator.cpp:102 +msgid "Processing small thumbs" msgstr "" -#: utilities/setup/setup.cpp:198 -msgid "Miscellaneous Settings" +#: utilities/batch/batchthumbsgenerator.cpp:111 +msgid "Processing large thumbs" msgstr "" -#: utilities/setup/setup.cpp:245 -msgid "" -"The Exif auto-rotate thumbnails option has been changed.\n" -"Do you want to rebuild all albums' items' thumbnails now?\n" -"\n" -"Note: thumbnail processing can take a while! You can start this job later from " -"the \"Tools\" menu." +#: utilities/batch/batchthumbsgenerator.cpp:125 +msgid "The thumbnails database has been updated." msgstr "" -#: utilities/setup/setupgeneral.cpp:113 -msgid "Album &Library Path" +#: utilities/cameragui/albumselectdialog.cpp:87 +msgid "Select Album" msgstr "" -#: utilities/setup/setupgeneral.cpp:117 -msgid "" -"
Here you can set the main path to the digiKam album library in your " -"computer." -"
Write access is required for this path and do not use a remote path here, " -"like an NFS mounted file system." +#: utilities/cameragui/albumselectdialog.cpp:90 +msgid "&New Album" msgstr "" -#: utilities/setup/setupgeneral.cpp:132 -msgid "Thumbnail Information" +#: utilities/cameragui/albumselectdialog.cpp:278 +msgid "Create New Album" msgstr "" -#: utilities/setup/setupgeneral.cpp:134 -msgid "Show file &name" +#: utilities/cameragui/albumselectdialog.cpp:300 +msgid "New Album Name" msgstr "" -#: utilities/setup/setupgeneral.cpp:135 -msgid "
Set this option to show the file name below the image thumbnail." +#: utilities/cameragui/albumselectdialog.cpp:301 +msgid "" +"Creating new album in '%1'\n" +"Enter album name:" msgstr "" -#: utilities/setup/setupgeneral.cpp:137 -msgid "Show file si&ze" +#: utilities/cameragui/cameracontroller.cpp:217 +msgid "Connecting to camera..." msgstr "" -#: utilities/setup/setupgeneral.cpp:138 -msgid "
Set this option to show the file size below the image thumbnail." +#: utilities/cameragui/cameracontroller.cpp:226 +msgid "Connection established" msgstr "" -#: utilities/setup/setupgeneral.cpp:140 -msgid "Show camera creation &date" +#: utilities/cameragui/cameracontroller.cpp:228 +msgid "Connection failed" msgstr "" -#: utilities/setup/setupgeneral.cpp:141 -msgid "" -"
Set this option to show the camera creation date below the image thumbnail." +#: utilities/cameragui/cameracontroller.cpp:234 +msgid "Getting camera information..." msgstr "" -#: utilities/setup/setupgeneral.cpp:144 -msgid "Show file &modification date" +#: utilities/cameragui/cameracontroller.cpp:251 +msgid "Listing folders..." msgstr "" -#: utilities/setup/setupgeneral.cpp:145 -msgid "" -"
Set this option to show the file modification date below the image " -"thumbnail." +#: utilities/cameragui/cameracontroller.cpp:265 +msgid "The folders have been listed." msgstr "" -#: utilities/setup/setupgeneral.cpp:148 -msgid "Show digiKam &captions" +#: utilities/cameragui/cameracontroller.cpp:273 +msgid "The files in %1 have been listed." msgstr "" -#: utilities/setup/setupgeneral.cpp:149 -msgid "" -"
Set this option to show the digiKam captions below the image thumbnail." +#: utilities/cameragui/cameracontroller.cpp:279 +#, c-format +msgid "Failed to list files in %1" msgstr "" -#: utilities/setup/setupgeneral.cpp:152 -msgid "Show digiKam &tags" +#: utilities/cameragui/cameracontroller.cpp:295 +msgid "Listing files in %1 is complete" msgstr "" -#: utilities/setup/setupgeneral.cpp:153 -msgid "
Set this option to show the digiKam tags below the image thumbnail." +#: utilities/cameragui/cameracontroller.cpp:304 +msgid "Getting thumbnails..." msgstr "" -#: utilities/setup/setupgeneral.cpp:156 -msgid "Show digiKam &rating" +#: utilities/cameragui/cameracontroller.cpp:327 +msgid "Getting EXIF information for %1/%2..." msgstr "" -#: utilities/setup/setupgeneral.cpp:157 -msgid "" -"
Set this option to show the digiKam rating below the image thumbnail." +#: utilities/cameragui/cameracontroller.cpp:366 +msgid "Downloading file %1..." msgstr "" -#: utilities/setup/setupgeneral.cpp:160 -msgid "Show ima&ge dimensions (warning: slow)" +#: utilities/cameragui/cameracontroller.cpp:389 +msgid "EXIF rotating file %1..." msgstr "" -#: utilities/setup/setupgeneral.cpp:161 -msgid "" -"
Set this option to show the image size in pixels below the image thumbnail." +#: utilities/cameragui/cameracontroller.cpp:396 +msgid "Setting Metadata tags to file %1..." msgstr "" -#: utilities/setup/setupgeneral.cpp:173 -msgid "Sidebar thumbnail size:" +#: utilities/cameragui/cameracontroller.cpp:417 +msgid "Converting %1 to lossless file format..." msgstr "" -#: utilities/setup/setupgeneral.cpp:179 -msgid "" -"
Set this option to configure the size in pixels of the thumbnails in " -"digiKam's sidebars. This option will take effect when you restart digiKam." +#: utilities/cameragui/cameracontroller.cpp:464 +msgid "Retrieving file %1 from camera..." msgstr "" -#: utilities/setup/setupgeneral.cpp:186 -msgid "Show count of items in all tree-view" +#: utilities/cameragui/cameracontroller.cpp:478 +msgid "Failed to retrieve file %1 from camera" msgstr "" -#: utilities/setup/setupgeneral.cpp:190 -msgid "Thumbnail click action:" +#: utilities/cameragui/cameracontroller.cpp:493 +msgid "Uploading file %1 to camera..." msgstr "" -#: utilities/setup/setupgeneral.cpp:192 -msgid "Show embedded preview" +#: utilities/cameragui/cameracontroller.cpp:524 +msgid "Deleting file %1..." msgstr "" -#: utilities/setup/setupgeneral.cpp:193 -msgid "Start image editor" +#: utilities/cameragui/cameracontroller.cpp:550 +msgid "Toggle lock file %1..." msgstr "" -#: utilities/setup/setupgeneral.cpp:194 -msgid "
Here, choose what should happen when you click on a thumbnail." +#: utilities/cameragui/cameracontroller.cpp:941 +msgid "Rename File" msgstr "" -#: utilities/setup/setupgeneral.cpp:199 -msgid "Embedded preview loads full image size" +#: utilities/cameragui/cameracontroller.cpp:999 +#, c-format +msgid "Skipped file %1" msgstr "" -#: utilities/setup/setupgeneral.cpp:200 -msgid "" -"
Set this option to load the full image size with an embedded preview, " -"instead a reduced one. Because this option will take more time to load images, " -"use it only if you have a fast computer." +#: utilities/cameragui/cameracontroller.cpp:1026 +msgid "Failed to download file \"%1\"." msgstr "" -#: utilities/setup/setupgeneral.cpp:281 -msgid "Sorry you can't use your home directory as album library." +#: utilities/cameragui/cameracontroller.cpp:1036 +#: utilities/cameragui/cameracontroller.cpp:1075 +#: utilities/cameragui/cameracontroller.cpp:1110 +#: utilities/cameragui/cameracontroller.cpp:1145 +msgid " Do you want to continue?" msgstr "" -#: utilities/setup/setupgeneral.cpp:289 -msgid "" -"No write access for this path.\n" -"Warning: the caption and tag features will not work." +#: utilities/cameragui/cameracontroller.cpp:1065 +msgid "Failed to upload file \"%1\"." msgstr "" -#: utilities/setup/setupicc.cpp:157 -msgid "Color Management Policy" +#: utilities/cameragui/cameracontroller.cpp:1100 +msgid "Failed to delete file \"%1\"." msgstr "" -#: utilities/setup/setupicc.cpp:161 -msgid "Enable Color Management" +#: utilities/cameragui/cameracontroller.cpp:1135 +msgid "Failed to toggle lock file \"%1\"." msgstr "" -#: utilities/setup/setupicc.cpp:162 -msgid "" -"
Please select the camera folder where you want to upload the images.
" msgstr "" -#: utilities/setup/setupicc.cpp:180 -msgid "" -"If this option is enabled, digiKam applies the Workspace default color " -"profile to an image, without prompting you about missing embedded profiles or " -"embedded profiles different from the workspace profile.
" +#: utilities/cameragui/camerafolderview.cpp:62 +msgid "Camera Folders" msgstr "" -#: utilities/setup/setupicc.cpp:185 -msgid "Ask when opening an image in the Image Editor" +#: digikam/digikamui.rc:54 showfoto/showfotoui.rc:37 +#: utilities/cameragui/cameraiconview.cpp:586 +#: utilities/imageeditor/editor/digikamimagewindowui.rc:34 +#: utilities/lighttable/lighttablewindowui.rc:24 +#, no-c-format +msgid "&View" msgstr "" -#: utilities/setup/setupicc.cpp:186 -msgid "" -"If this option is enabled, digiKam asks to user before it applies the " -"Workspace default color profile to an image which has no embedded profile or, " -"if the image has an embedded profile, when it's not the same as the workspace " -"profile.
" +#: utilities/cameragui/cameraiconview.cpp:588 +msgid "Download" msgstr "" -#: utilities/setup/setupicc.cpp:201 -msgid "Color Profiles Directory" +#: utilities/cameragui/cameraiconview.cpp:589 +msgid "Download && Delete" msgstr "" -#: utilities/setup/setupicc.cpp:206 -msgid "" -"Default path to the color profiles folder. You must store all your color " -"profiles in this directory.
" +#: utilities/cameragui/cameraiconview.cpp:590 +msgid "Toggle lock" msgstr "" -#: utilities/setup/setupicc.cpp:213 -msgid "ICC Profiles Settings" +#: utilities/cameragui/cameraiconview.cpp:755 +msgid "&Upload to camera" msgstr "" -#: utilities/setup/setupicc.cpp:218 -msgid "Use color managed view (warning: slow)" +#: utilities/cameragui/camerainfodialog.cpp:45 +#: utilities/cameragui/cameraui.cpp:454 +msgid "Camera Information" msgstr "" -#: utilities/setup/setupicc.cpp:219 -msgid "" -"Turn on this option if you want to use your Monitor Color Profile " -"to show your pictures in the Image Editor window with a color correction " -"adapted to your monitor. Warning: this option can take a while to render " -"pictures on the screen, especially with a slow computer.
" +#: utilities/cameragui/camerainfodialog.cpp:52 +msgid "Summary" msgstr "" -#: utilities/setup/setupicc.cpp:227 -msgid "Monitor:" +#: utilities/cameragui/camerainfodialog.cpp:52 +msgid "Camera Summary" msgstr "" -#: utilities/setup/setupicc.cpp:230 -msgid "" -"Select the color profile for your monitor. You need to enable the " -"Use color managed view option to use this profile.
" +#: utilities/cameragui/camerainfodialog.cpp:62 +msgid "Manual" msgstr "" -#: utilities/setup/setupicc.cpp:233 -msgid "" -"You can use this button to get more detailed information about the selected " -"monitor profile.
" +#: utilities/cameragui/camerainfodialog.cpp:62 +msgid "Camera Manual" msgstr "" -#: utilities/setup/setupicc.cpp:244 -msgid "Workspace:" +#: utilities/cameragui/camerainfodialog.cpp:72 +msgid "About" msgstr "" -#: utilities/setup/setupicc.cpp:247 -msgid "" -"All the images will be converted to the color space of this profile, so you " -"must select a profile appropriate for editing.
" -"These color profiles are device independent.
" +#: utilities/cameragui/camerainfodialog.cpp:72 +msgid "About Driver" msgstr "" -#: utilities/setup/setupicc.cpp:251 -msgid "" -"You can use this button to get more detailed information about the selected " -"workspace profile.
" +#: utilities/cameragui/cameraui.cpp:234 +msgid "D&elete" msgstr "" -#: utilities/setup/setupicc.cpp:261 -msgid "Input:" +#: utilities/cameragui/cameraui.cpp:235 +msgid "&Download" msgstr "" -#: utilities/setup/setupicc.cpp:264 -msgid "" -"You must select the profile for your input device (usually, your camera, " -"scanner...)
" +#: utilities/cameragui/cameraui.cpp:236 +msgid "&Images" msgstr "" -#: utilities/setup/setupicc.cpp:267 -msgid "" -"You can use this button to get more detailed information about the selected " -"input profile.
" +#: utilities/cameragui/cameraui.cpp:267 +msgid "Set how digiKam will rename files as they are downloaded." msgstr "" -#: utilities/setup/setupicc.cpp:277 -msgid "Soft proof:" +#: utilities/cameragui/cameraui.cpp:270 +msgid "File Renaming Options" msgstr "" -#: utilities/setup/setupicc.cpp:280 -msgid "" -"
You must select the profile for your output device (usually, your printer). " -"This profile will be used to do a soft proof, so you will be able to preview " -"how an image will be rendered via an output device.
" +#: utilities/cameragui/cameraui.cpp:276 +msgid "Extension-based sub-albums" msgstr "" -#: utilities/setup/setupicc.cpp:284 -msgid "" -"You can use this button to get more detailed information about the selected " -"soft proof profile.
" +#: utilities/cameragui/cameraui.cpp:277 +msgid "Date-based sub-albums" msgstr "" -#: utilities/setup/setupicc.cpp:299 -msgid "Use black point compensation" +#: utilities/cameragui/cameraui.cpp:279 +#: utilities/cameragui/renamecustomizer.cpp:207 +msgid "Date format:" msgstr "" -#: utilities/setup/setupicc.cpp:300 -msgid "" -"Black Point Compensation is a way to make adjustments between the " -"maximum black levels of digital files and the black capabilities of various " -"digital devices.
" +#: utilities/cameragui/cameraui.cpp:281 +#: utilities/cameragui/renamecustomizer.cpp:210 +msgid "ISO" msgstr "" -#: utilities/setup/setupicc.cpp:307 -msgid "Rendering Intents:" +#: utilities/cameragui/cameraui.cpp:282 +#: utilities/cameragui/renamecustomizer.cpp:211 +msgid "Full Text" msgstr "" -#: utilities/setup/setupicc.cpp:314 +#: utilities/cameragui/cameraui.cpp:283 +#: utilities/cameragui/renamecustomizer.cpp:212 +msgid "Local Settings" +msgstr "" + +#: utilities/cameragui/cameraui.cpp:289 +msgid "Set how digiKam creates albums automatically when downloading." +msgstr "" + +#: utilities/cameragui/cameraui.cpp:290 msgid "" -"
Perceptual intent causes the full gamut of the image to be compressed " -"or expanded to fill the gamut of the destination device, so that gray balance " -"is preserved but colorimetric accuracy may not be preserved.
" -"In other words, if certain colors in an image fall outside of the range of " -"colors that the output device can render, the image intent will cause all the " -"colors in the image to be adjusted so that the every color in the image falls " -"within the range that can be rendered and so that the relationship between " -"colors is preserved as much as possible.
" -"This intent is most suitable for display of photographs and images, and is " -"the default intent.
Absolute Colorimetric intent causes any colors that fall outside the " -"range that the output device can render are adjusted to the closest color that " -"can be rendered, while all other colors are left unchanged.
" -"This intent preserves the white point and is most suitable for spot colors " -"(Pantone, TruMatch, logo colors, ...).
Relative Colorimetric intent is defined such that any colors that " -"fall outside the range that the output device can render are adjusted to the " -"closest color that can be rendered, while all other colors are left unchanged. " -"Proof intent does not preserve the white point.
Saturation intent preserves the saturation of colors in the image at " -"the possible expense of hue and lightness.
" -"Implementation of this intent remains somewhat problematic, and the ICC is " -"still working on methods to achieve the desired effects.
" -"This intent is most suitable for business graphics such as charts, where it " -"is more important that the colors be vivid and contrast well with each other " -"rather than a specific color.
Enable this option if you want to download your pictures into " +"automatically created file extension-based sub-albums of the destination " +"album. This way, you can separate JPEG and RAW files as they are downloaded " +"from your camera." msgstr "" -#: utilities/setup/setupicc.cpp:467 +#: utilities/cameragui/cameraui.cpp:293 msgid "" -"
You must set a correct default path for your ICC color profiles files.
" +"Enable this option if you want to download your pictures into " +"automatically created file date-based sub-albums of the destination album." msgstr "" -#: utilities/setup/setupicc.cpp:484 -msgid "
Sorry, there are no ICC profiles files in " +#: utilities/cameragui/cameraui.cpp:296 +msgid "" +"
Select your preferred date format used to create new albums. The options " +"available are:
ISO: the date format is in accordance with ISO 8601 " +"(YYYY-MM-DD). E.g.: 2006-08-24
Full Text: the date format is " +"in a user-readable string. E.g.: Thu Aug 24 2006
Local Settings" +"b>: the date format depending on TDE control panel settings.
" msgstr "" -#: utilities/setup/setupicc.cpp:486 -msgid "
" +#: utilities/cameragui/cameraui.cpp:305 +msgid "Auto-creation of Albums" msgstr "" -#: utilities/setup/setupicc.cpp:551 -msgid "The following profile is invalid:
" +#: utilities/cameragui/cameraui.cpp:311 +msgid "Set default photographer identity" msgstr "" -#: utilities/setup/setupicc.cpp:555 -msgid "Invalid Profile" +#: utilities/cameragui/cameraui.cpp:312 +msgid "Set default credit and copyright" msgstr "" -#: utilities/setup/setupicc.cpp:559 -msgid "Invalid color profile has been removed" +#: utilities/cameragui/cameraui.cpp:313 +msgid "Fix internal date && time" msgstr "" -#: utilities/setup/setupicc.cpp:563 -msgid "" -"
digiKam has failed to remove the invalid color profile
" -"You have to do it manually
" +#: utilities/cameragui/cameraui.cpp:315 +msgid "Auto-rotate/flip image" msgstr "" -#: utilities/setup/setupicc.cpp:691 -msgid "Sorry, there is not any selected profile" +#: utilities/cameragui/cameraui.cpp:316 +msgid "Convert to lossless file format" msgstr "" -#: utilities/setup/setuptooltip.cpp:109 -msgid "Show album items toolti&ps" +#: utilities/cameragui/cameraui.cpp:318 +msgid "New image format:" msgstr "" -#: utilities/setup/setuptooltip.cpp:110 +#: utilities/cameragui/cameraui.cpp:330 msgid "" -"Set this option to display image information when the mouse hovers over an " -"album item." +"
Set here all options to fix/transform JPEG files automatically as they " +"are downloaded." msgstr "" -#: utilities/setup/setuptooltip.cpp:147 -msgid "Show camera aperture and focal" +#: utilities/cameragui/cameraui.cpp:332 +msgid "" +"
Enable this option if you want images automatically rotated or flipped " +"using EXIF information provided by the camera." msgstr "" -#: utilities/setup/setuptooltip.cpp:171 -msgid "digiKam Information" +#: utilities/cameragui/cameraui.cpp:334 +msgid "" +"
Enable this option to store the default photographer identity in the IPTC " +"tags using digiKam's metadata settings." msgstr "" -#: utilities/setup/setuptooltip.cpp:173 -msgid "Show album name" +#: utilities/cameragui/cameraui.cpp:336 +msgid "" +"
Enable this option to store the default credit and copyright information " +"in the IPTC tags using digiKam's metadata settings." msgstr "" -#: utilities/setup/setuptooltip.cpp:174 -msgid "
Set this option to display the album name." +#: utilities/cameragui/cameraui.cpp:338 +msgid "" +"
Enable this option to set date and time metadata tags to the right values " +"if your camera does not set these tags correctly when pictures are taken. " +"The values will be saved in the DateTimeDigitized and DateTimeCreated EXIF/" +"IPTC fields." msgstr "" -#: utilities/setup/setuptooltip.cpp:176 -msgid "Show image caption" +#: utilities/cameragui/cameraui.cpp:342 +msgid "" +"
Enable this option to automatically convert all JPEG files to a lossless " +"image format. Note: Image conversion can take a while on a slow " +"computer." msgstr "" -#: utilities/setup/setuptooltip.cpp:177 -msgid "
Set this option to display the image captions." +#: utilities/cameragui/cameraui.cpp:345 +msgid "" +"
Select your preferred lossless image file format to convert to. Note:" +" All metadata will be preserved during the conversion." msgstr "" -#: utilities/setup/setuptooltip.cpp:179 -msgid "Show image tags" +#: utilities/cameragui/cameraui.cpp:349 +msgid "On the Fly Operations (JPEG only)" msgstr "" -#: utilities/setup/setuptooltip.cpp:180 -msgid "
Set this option to display the image tags." +#: utilities/cameragui/cameraui.cpp:411 +msgid "Select &All" msgstr "" -#: utilities/setup/setuptooltip.cpp:182 -msgid "Show image rating" +#: utilities/cameragui/cameraui.cpp:412 +msgid "Select N&one" msgstr "" -#: utilities/setup/setuptooltip.cpp:183 -msgid "
Set this option to display the image rating." +#: utilities/cameragui/cameraui.cpp:413 +msgid "&Invert Selection" msgstr "" -#: utilities/setup/cameraselection.cpp:100 -msgid "Camera Configuration" +#: utilities/cameragui/cameraui.cpp:415 +msgid "Select &New Items" msgstr "" -#: utilities/setup/cameraselection.cpp:108 -msgid "Mounted Camera" +#: utilities/cameragui/cameraui.cpp:417 +msgid "Increase Thumbnail Size" msgstr "" -#: utilities/setup/cameraselection.cpp:118 -msgid "Camera List" +#: utilities/cameragui/cameraui.cpp:418 +msgid "Decrease Thumbnail Size" msgstr "" -#: utilities/setup/cameraselection.cpp:122 -msgid "" -"
Select the camera name that you want to use. All default settings on the " -"right panel will be set automatically.
" -"This list has been generated using the gphoto2 library installed on your " -"computer.
" +#: utilities/cameragui/cameraui.cpp:420 +msgid "Toggle Lock" msgstr "" -#: utilities/setup/cameraselection.cpp:131 -msgid "Camera Title" +#: utilities/cameragui/cameraui.cpp:426 +msgid "Download Selected" msgstr "" -#: utilities/setup/cameraselection.cpp:133 -msgid "" -"Set here the name used in digiKam interface to identify this camera.
" +#: utilities/cameragui/cameraui.cpp:428 +msgid "Download All" msgstr "" -#: utilities/setup/cameraselection.cpp:138 -msgid "Camera Port Type" +#: utilities/cameragui/cameraui.cpp:431 +msgid "Download/Delete Selected" msgstr "" -#: utilities/setup/cameraselection.cpp:142 -msgid "USB" +#: utilities/cameragui/cameraui.cpp:433 +msgid "Download/Delete All" msgstr "" -#: utilities/setup/cameraselection.cpp:143 -msgid "" -"Select this option if your camera is connected to your computer using an USB " -"cable.
" +#: utilities/cameragui/cameraui.cpp:436 +msgid "Upload..." msgstr "" -#: utilities/setup/cameraselection.cpp:147 -msgid "Serial" +#: utilities/cameragui/cameraui.cpp:445 +msgid "Delete Selected" msgstr "" -#: utilities/setup/cameraselection.cpp:148 -msgid "" -"Select this option if your camera is connected to your computer using a " -"serial cable.
" +#: utilities/cameragui/cameraui.cpp:446 +msgid "Delete All" msgstr "" -#: utilities/setup/cameraselection.cpp:153 -msgid "Camera Port Path" +#: utilities/cameragui/cameraui.cpp:680 +msgid "Cancelling current operation, please wait..." msgstr "" -#: utilities/setup/cameraselection.cpp:155 -msgid "Note: only for serial port camera" +#: utilities/cameragui/cameraui.cpp:708 +msgid "Do you want to close the dialog and cancel the current operation?" msgstr "" -#: utilities/setup/cameraselection.cpp:159 -msgid "" -"Select the serial port to use on your computer. This option is only required " -"if you use a serial camera.
" +#: utilities/cameragui/cameraui.cpp:714 +msgid "Disconnecting from camera, please wait..." msgstr "" -#: utilities/setup/cameraselection.cpp:164 -msgid "Camera Mount Path" +#: utilities/cameragui/cameraui.cpp:750 +msgid "Scanning for new files, please wait..." msgstr "" -#: utilities/setup/cameraselection.cpp:167 -msgid "Note: only for USB/IEEE mass storage camera" +#: utilities/cameragui/cameraui.cpp:791 +msgid "Ready" msgstr "" -#: utilities/setup/cameraselection.cpp:171 +#: utilities/cameragui/cameraui.cpp:863 msgid "" -"Set here the mount path to use on your computer. This option is only " -"required if you use a USB Mass Storage camera.
" +"Failed to connect to the camera. Please make sure it is connected properly " +"and turned on. Would you like to try again?" msgstr "" -#: utilities/setup/cameraselection.cpp:188 -msgid "" -"To set a USB Mass Storage camera"
-"
(which looks like a removable drive when mounted on your desktop), please"
-"
use %1 from camera list.
To set a Generic PTP USB Device"
-"
(which uses the Picture Transfer Protocol), please"
-"
use %1 from the camera list.
A complete list of camera settings to use is"
-"
available at "
-"this url.
Please select the destination album from the digiKam library to import " +"the camera pictures into.
" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:387 -#: utilities/imageeditor/tools/imageprint.cpp:592 -#: utilities/imageeditor/tools/imageprint.cpp:639 -msgid "Top-Central" +#: utilities/cameragui/cameraui.cpp:1454 +msgid "" +"The items listed below are locked by camera (read-only). These items will " +"not be deleted. If you really want to delete these items, please unlock them " +"and try again." msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:388 -#: utilities/imageeditor/tools/imageprint.cpp:580 -#: utilities/imageeditor/tools/imageprint.cpp:627 -msgid "Top-Right" +#: utilities/cameragui/cameraui.cpp:1466 +#, c-format +msgid "" +"_n: About to delete this image. Deleted files are unrecoverable. Are you " +"sure?\n" +"About to delete these %n images. Deleted files are unrecoverable. Are you " +"sure?" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:389 -#: utilities/imageeditor/tools/imageprint.cpp:568 -#: utilities/imageeditor/tools/imageprint.cpp:615 -msgid "Central-Left" +#: utilities/cameragui/cameraui.cpp:1623 +msgid "A file with same name (%1) exists in folder %2" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:390 -#: utilities/imageeditor/tools/imageprint.cpp:648 -msgid "Central" +#: utilities/cameragui/cameraui.cpp:1636 +msgid "Failed to find Album for path '%1'" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:391 -#: utilities/imageeditor/tools/imageprint.cpp:572 -#: utilities/imageeditor/tools/imageprint.cpp:619 -msgid "Central-Right" +#: utilities/cameragui/freespacewidget.cpp:184 +msgid "Album Library" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:392 -#: utilities/imageeditor/tools/imageprint.cpp:584 -#: utilities/imageeditor/tools/imageprint.cpp:631 -msgid "Bottom-Left" +#: utilities/cameragui/freespacewidget.cpp:196 +#: utilities/cameragui/freespacewidget.cpp:207 +msgid "Capacity:" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:393 -#: utilities/imageeditor/tools/imageprint.cpp:596 -#: utilities/imageeditor/tools/imageprint.cpp:643 -msgid "Bottom-Central" +#: utilities/cameragui/freespacewidget.cpp:199 +#: utilities/cameragui/freespacewidget.cpp:210 +msgid "Available:" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:394 -#: utilities/imageeditor/tools/imageprint.cpp:588 -#: utilities/imageeditor/tools/imageprint.cpp:635 -msgid "Bottom-Right" +#: utilities/cameragui/freespacewidget.cpp:202 +msgid "Require:" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:399 -msgid "Print fi&lename below image" +#: utilities/cameragui/gpcamera.cpp:965 +msgid "" +"Title: %1\n" +"Model: %2\n" +"Port: %3\n" +"Path: %4\n" +"\n" +"Thumbnails: %5\n" +"Delete items: %6\n" +"Upload items: %7\n" +"Create directories: %8\n" +"Delete directories: %9\n" +"\n" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:403 -msgid "Print image in &black and white" +#: utilities/cameragui/gpcamera.cpp:978 utilities/cameragui/gpcamera.cpp:979 +#: utilities/cameragui/gpcamera.cpp:980 utilities/cameragui/gpcamera.cpp:981 +#: utilities/cameragui/gpcamera.cpp:982 +msgid "yes" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:407 -msgid "&Auto-rotate page" +#: utilities/cameragui/gpcamera.cpp:978 utilities/cameragui/gpcamera.cpp:979 +#: utilities/cameragui/gpcamera.cpp:980 utilities/cameragui/gpcamera.cpp:981 +#: utilities/cameragui/gpcamera.cpp:982 +msgid "no" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:415 -msgid "Use Color Management for Printing" +#: utilities/cameragui/gpcamera.cpp:1045 +msgid "" +"\n" +"\n" +"To report problems about this driver, please contact the gphoto2 team at:\n" +"\n" +"http://gphoto.org/bugs" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:418 -msgid "Settings..." +#: utilities/cameragui/renamecustomizer.cpp:143 +msgid "Camera filenames" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:428 -msgid "Scaling" +#: utilities/cameragui/renamecustomizer.cpp:144 +msgid "" +"Turn on this option to use camera provided image filenames without " +"modifications." msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:432 -msgid "Scale image to &fit" +#: utilities/cameragui/renamecustomizer.cpp:153 +msgid "Change case to:" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:435 -msgid "Print e&xact size: " +#: utilities/cameragui/renamecustomizer.cpp:157 +msgid "Leave as Is" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:451 -#: utilities/imageeditor/tools/imageprint.cpp:545 -#: utilities/imageeditor/tools/imageprint.cpp:783 -#: utilities/imageeditor/tools/imageprint.cpp:801 -msgid "Millimeters" +#: utilities/cameragui/renamecustomizer.cpp:158 +msgid "Upper" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:452 -#: utilities/imageeditor/tools/imageprint.cpp:787 -#: utilities/imageeditor/tools/imageprint.cpp:805 -msgid "Centimeters" +#: utilities/cameragui/renamecustomizer.cpp:159 +msgid "Lower" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:453 -#: utilities/imageeditor/tools/imageprint.cpp:809 -msgid "Inches" +#: utilities/cameragui/renamecustomizer.cpp:161 +msgid "
Set the method to use to change the case of image filenames." msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:455 -msgid "Keep ratio" +#: utilities/cameragui/renamecustomizer.cpp:173 +msgid "Customize" msgstr "" -#: utilities/imageeditor/tools/imageprint.cpp:758 -msgid "" -"
Color Management is disabled.
" -"You can enable it now by clicking on the \"Settings\" button.
" +#: utilities/cameragui/renamecustomizer.cpp:175 +msgid "Turn on this option to customize image filenames during download." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:147 -msgid "Resize Image" +#: utilities/cameragui/renamecustomizer.cpp:187 +msgid "Prefix:" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:151 -msgid "&Save As..." +#: utilities/cameragui/renamecustomizer.cpp:192 +msgid "
Set the prefix which will be added to image filenames." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:152 -msgid "&Load..." +#: utilities/cameragui/renamecustomizer.cpp:195 +msgid "Suffix:" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:158 -msgid "
Reset all filter parameters to their default values." +#: utilities/cameragui/renamecustomizer.cpp:199 +msgid "
Set the suffix which will be added to image filenames." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:159 -msgid "
Load all filter parameters from settings text file." +#: utilities/cameragui/renamecustomizer.cpp:202 +msgid "Add Date && Time" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:160 -msgid "
Save all filter parameters to settings text file." +#: utilities/cameragui/renamecustomizer.cpp:204 +msgid "
Set this option to add the camera provided date and time." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:178 -msgid "New Size" +#: utilities/cameragui/renamecustomizer.cpp:209 +msgid "Standard" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:185 -msgid "
Set here the new image width in pixels." +#: utilities/cameragui/renamecustomizer.cpp:213 +msgid "Advanced..." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:192 -msgid "
Set here the new image height in pixels." +#: utilities/cameragui/renamecustomizer.cpp:214 +msgid "" +"
Select your preferred date format for creating new albums. The options " +"available are:
Standard: the date format that has been used as " +"a standard by digiKam. E.g.: 20060824T142618
ISO: the " +"date format according to ISO 8601 (YYYY-MM-DD). E.g.: " +"2006-08-24T14:26:18Full Text: the date format is a user-" +"readable string. E.g.: Thu Aug 24 14:26:18 2006
Local " +"Settings: the date format depending on TDE control panel settings." +"p>
Advanced: allows the user to specify a custom date format.
" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:199 -msgid "Set here the new image width in percent." +#: utilities/cameragui/renamecustomizer.cpp:234 +msgid "Add Camera Name" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:201 -msgid "Height (%):" +#: utilities/cameragui/renamecustomizer.cpp:236 +msgid "
Set this option to add the camera name." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:206 -msgid "
Set here the new image height in percent." +#: utilities/cameragui/renamecustomizer.cpp:238 +msgid "Add Sequence Number" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:208 -msgid "Maintain aspect ratio" +#: utilities/cameragui/renamecustomizer.cpp:240 +msgid "" +"
Set this option to add a sequence number starting with the index set " +"below." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:209 -msgid "
Enable this option to maintain aspect ratio with new image sizes." +#: utilities/cameragui/renamecustomizer.cpp:243 +msgid "Start Index:" msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:221 -msgid "Restore photograph" +#: utilities/cameragui/renamecustomizer.cpp:246 +msgid "" +"
Set the starting index value used to rename files with a sequence number." msgstr "" -#: utilities/imageeditor/tools/imageresize.cpp:222 +#: utilities/cameragui/renamecustomizer.cpp:436 msgid "" -"
Enable this option to restore photograph content. This way is usefull to "
-"scale-up an image to an huge size. Warning: this process can take a while."
+" Enter the format for date and time. Use dd for the day, "
+"MM for the month, yyyy for the year, hh for the hour, "
+"mm for the minute, ss for the second. Examples: "
+"yyyyMMddThhmmss for 20060824T142418,
yyyy-MM-dd hh:mm:ss "
+"for 2006-08-24 14:24:18.
This shows the current progress when you use Restoration mode."
+#: utilities/cameragui/renamecustomizer.cpp:475
+msgid "photo"
msgstr ""
-#: utilities/imageeditor/tools/imageresize.cpp:551
-#: utilities/imageeditor/tools/imageresize.cpp:583
-msgid "Resize"
+#: utilities/cameragui/umscamera.cpp:487
+msgid ""
+"Mounted Camera driver for USB/IEEE1394 mass storage cameras and Flash "
+"disk card readers.
"
msgstr ""
-#: utilities/imageeditor/tools/imageresize.cpp:608
-msgid "Photograph Resizing Settings File to Load"
+#: utilities/cameragui/umscamera.cpp:490
+msgid "Title: %1
Model: %2
Port: %3
Path: %4
"
msgstr ""
-#: utilities/imageeditor/tools/imageresize.cpp:619
-msgid "\"%1\" is not a Photograph Resizing settings text file."
+#: utilities/cameragui/umscamera.cpp:503
+msgid ""
+"For more information about the Mounted Camera driver, please read "
+"Supported Digital Still Cameras section in the digiKam manual."
msgstr ""
-#: utilities/imageeditor/tools/imageresize.cpp:626
-msgid "Cannot load settings from the Photograph Resizing text file."
-msgstr ""
-
-#: utilities/imageeditor/tools/imageresize.cpp:635
-msgid "Photograph Resizing Settings File to Save"
-msgstr ""
-
-#: utilities/imageeditor/tools/imageresize.cpp:644
-msgid "Cannot save settings to the Photograph Resizing text file."
+#: utilities/cameragui/umscamera.cpp:511
+msgid ""
+"The Mounted Camera driver is a simple interface to a camera disk "
+"mounted locally on your system.
It doesn't use libgphoto2 drivers."
+"
To report any problems with this driver, please contact the digiKam "
+"team at:
http://www.digikam.org/?q=contact"
msgstr ""
#: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:62
@@ -9575,15 +9936,26 @@ msgstr ""
#: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:91
msgid ""
-"
This image has not been assigned a color profile.
" -"Do you want to convert it to your workspace color profile?
" +"This image has not been assigned a color profile.
Do you want to " +"convert it to your workspace color profile?
" msgstr "" #: utilities/imageeditor/canvas/colorcorrectiondlg.cpp:101 msgid "" "This image has been assigned to a color profile that does not match your " -"default workspace color profile.
" -"Do you want to convert it to your workspace color profile?
" +"default workspace color profile.Do you want to convert it to your " +"workspace color profile?
" +msgstr "" + +#: utilities/imageeditor/canvas/dimginterface.cpp:422 +msgid "" +"Cannot find the ICC color-space profile file. The ICC profiles path seems to " +"be invalid. No color transform will be applied. Please check the \"Color " +"Management\" configuration in digiKam's setup to verify the ICC path." +msgstr "" + +#: utilities/imageeditor/canvas/imagepluginloader.cpp:117 +msgid "Loading Image Plugins" msgstr "" #: utilities/imageeditor/canvas/undoaction.cpp:37 @@ -9614,15 +9986,32 @@ msgstr "" msgid "Brightness,Contrast,Gamma" msgstr "" -#: utilities/imageeditor/canvas/dimginterface.cpp:422 -msgid "" -"Cannot find the ICC color-space profile file. The ICC profiles path seems to be " -"invalid. No color transform will be applied. Please check the \"Color " -"Management\" configuration in digiKam's setup to verify the ICC path." +#: utilities/imageeditor/editor/editortoolsettings.cpp:143 +msgid "Guide:" msgstr "" -#: utilities/imageeditor/canvas/imagepluginloader.cpp:117 -msgid "Loading Image Plugins" +#: utilities/imageeditor/editor/editortoolsettings.cpp:164 +msgid "Reset all settings to their default values." +msgstr "" + +#: utilities/imageeditor/editor/editortoolsettings.cpp:191 +msgid "Load..." +msgstr "" + +#: utilities/imageeditor/editor/editortoolsettings.cpp:192 +msgid "
Load all parameters from settings text file." +msgstr "" + +#: utilities/imageeditor/editor/editortoolsettings.cpp:198 +msgid "
Save all parameters to settings text file." +msgstr "" + +#: utilities/imageeditor/editor/editortoolsettings.cpp:206 +msgid "Try" +msgstr "" + +#: utilities/imageeditor/editor/editortoolsettings.cpp:207 +msgid "
Try all settings." msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:267 @@ -9639,6 +10028,15 @@ msgstr "" msgid "Print Image..." msgstr "" +#: utilities/imageeditor/editor/editorwindow.cpp:309 +msgid "Undo" +msgstr "" + +#: utilities/imageeditor/editor/editorwindow.cpp:322 +#: utilities/imageeditor/editor/editorwindow.cpp:557 +msgid "Redo" +msgstr "" + #: utilities/imageeditor/editor/editorwindow.cpp:370 msgid "Fit to &Selection" msgstr "" @@ -9648,6 +10046,10 @@ msgid "" "This option can be used to zoom the image to the current selection area." msgstr "" +#: utilities/imageeditor/editor/editorwindow.cpp:381 +msgid "Zoom" +msgstr "" + #: utilities/imageeditor/editor/editorwindow.cpp:408 #: utilities/lighttable/lighttablewindow.cpp:424 msgid "Toggle the window to full screen mode" @@ -9733,7 +10135,7 @@ msgid "Redo Last action" msgstr "" #: utilities/imageeditor/editor/editorwindow.cpp:570 -#: utilities/imageeditor/editor/editorwindow.cpp:1292 +#: utilities/imageeditor/editor/editorwindow.cpp:1288 msgid "No selection" msgstr "" @@ -9754,38 +10156,38 @@ msgstr "" msgid "Failed to print file: '%1'" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1173 +#: utilities/imageeditor/editor/editorwindow.cpp:1169 msgid "" "About to overwrite file \"%1\"\n" "Are you sure?" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1178 -#: utilities/imageeditor/editor/editorwindow.cpp:1660 -#: utilities/imageeditor/editor/editorwindow.cpp:1706 +#: utilities/imageeditor/editor/editorwindow.cpp:1174 +#: utilities/imageeditor/editor/editorwindow.cpp:1656 +#: utilities/imageeditor/editor/editorwindow.cpp:1702 msgid "Overwrite" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1194 +#: utilities/imageeditor/editor/editorwindow.cpp:1190 msgid "" "The image '%1' has been modified.\n" "Do you want to save it?" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1251 +#: utilities/imageeditor/editor/editorwindow.cpp:1247 msgid "Please wait while the image is being saved..." msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1357 +#: utilities/imageeditor/editor/editorwindow.cpp:1353 msgid "Failed to load image \"%1\"" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1392 +#: utilities/imageeditor/editor/editorwindow.cpp:1388 msgid "Saving: " msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1406 -#: utilities/imageeditor/editor/editorwindow.cpp:1447 +#: utilities/imageeditor/editor/editorwindow.cpp:1402 +#: utilities/imageeditor/editor/editorwindow.cpp:1443 msgid "" "Failed to save file\n" "\"%1\"\n" @@ -9793,71 +10195,72 @@ msgid "" "\"%2\"." msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1560 +#: utilities/imageeditor/editor/editorwindow.cpp:1556 msgid "New Image File Name" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1615 +#: utilities/imageeditor/editor/editorwindow.cpp:1611 msgid "Target image file format \"%1\" unsupported." msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1625 +#: utilities/imageeditor/editor/editorwindow.cpp:1621 msgid "" "Failed to save file\n" "\"%1\" to\n" "\"%2\"." msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1655 +#: utilities/imageeditor/editor/editorwindow.cpp:1651 msgid "" "A file named \"%1\" already exists. Are you sure you want to overwrite it?" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1659 -#: utilities/imageeditor/editor/editorwindow.cpp:1705 +#: utilities/imageeditor/editor/editorwindow.cpp:1655 +#: utilities/imageeditor/editor/editorwindow.cpp:1701 msgid "Overwrite File?" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1700 +#: utilities/imageeditor/editor/editorwindow.cpp:1696 msgid "" -"You do not have write permissions for the file named \"%1\". Are you sure you " -"want to overwrite it?" +"You do not have write permissions for the file named \"%1\". Are you sure " +"you want to overwrite it?" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1742 +#: utilities/imageeditor/editor/editorwindow.cpp:1738 msgid "Failed to overwrite original file" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1743 +#: utilities/imageeditor/editor/editorwindow.cpp:1739 msgid "Error Saving File" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1789 +#: utilities/imageeditor/editor/editorwindow.cpp:1785 msgid "Color Managed View is enabled" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1791 +#: utilities/imageeditor/editor/editorwindow.cpp:1787 msgid "Color Managed View is disabled" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1795 +#: utilities/imageeditor/editor/editorwindow.cpp:1791 msgid "" -"Color Management is not configured, so the Color Managed View is not available" +"Color Management is not configured, so the Color Managed View is not " +"available" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1818 +#: utilities/imageeditor/editor/editorwindow.cpp:1814 msgid "Under-Exposure indicator is enabled" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1819 +#: utilities/imageeditor/editor/editorwindow.cpp:1815 msgid "Under-Exposure indicator is disabled" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1840 +#: utilities/imageeditor/editor/editorwindow.cpp:1836 msgid "Over-Exposure indicator is enabled" msgstr "" -#: utilities/imageeditor/editor/editorwindow.cpp:1841 +#: utilities/imageeditor/editor/editorwindow.cpp:1837 msgid "Over-Exposure indicator is disabled" msgstr "" @@ -9878,6 +10281,11 @@ msgstr "" msgid "Image Editor - %1" msgstr "" +#: utilities/imageeditor/editor/imagewindow.cpp:449 +#: utilities/setup/setup.cpp:170 +msgid "Image Editor" +msgstr "" + #: utilities/imageeditor/editor/imagewindow.cpp:1032 msgid "" "There is no image to show in the current album.\n" @@ -9888,42 +10296,6 @@ msgstr "" msgid "No Image in Current Album" msgstr "" -#: utilities/imageeditor/editor/editortoolsettings.cpp:125 -msgid "" -"
Here you can see the original image panel which can help you to select the " -"clip preview." -"
Click and drag the mouse cursor in the red rectangle to change the clip " -"focus." -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:143 -msgid "Guide:" -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:164 -msgid "
Reset all settings to their default values." -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:191 -msgid "Load..." -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:192 -msgid "
Load all parameters from settings text file." -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:198 -msgid "
Save all parameters to settings text file." -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:206 -msgid "Try" -msgstr "" - -#: utilities/imageeditor/editor/editortoolsettings.cpp:207 -msgid "
Try all settings." -msgstr "" - #: utilities/imageeditor/rawimport/rawimport.cpp:78 msgid "Raw Import" msgstr "" @@ -9946,17 +10318,11 @@ msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:181 msgid "" -"
Select the histogram channel to display here:" -"
Luminosity: display the image's luminosity values." -"
Red: display the red image-channel values." -"
Green: display the green image-channel values." -"
Blue: display the blue image-channel values." -"
Colors: Display all color channel values at the same time." -msgstr "" - -#: utilities/cameragui/cameraui.cpp:869 -#: utilities/imageeditor/rawimport/rawsettingsbox.cpp:251 -msgid "Abort" +"
Select the histogram channel to display here:
Luminosity: " +"display the image's luminosity values.
Red: display the red image-" +"channel values.
Green: display the green image-channel values." +"
Blue: display the blue image-channel values.
Colors: " +"Display all color channel values at the same time." msgstr "" #: utilities/imageeditor/rawimport/rawsettingsbox.cpp:254 @@ -10021,819 +10387,1877 @@ msgstr "" msgid "
Use general Raw decoding settings to load this image in editor." msgstr "" -#: utilities/lighttable/lighttablebar.cpp:174 -msgid "Show on left panel" +#: utilities/imageeditor/tools/imageprint.cpp:208 +msgid "The image will not fit on the page, what do you want to do?" msgstr "" -#: utilities/lighttable/lighttablebar.cpp:175 -msgid "Show on right panel" +#: utilities/imageeditor/tools/imageprint.cpp:210 +msgid "Shrink" msgstr "" -#: utilities/lighttable/lighttablebar.cpp:185 -msgid "Remove item" +#: utilities/imageeditor/tools/imageprint.cpp:368 +msgid "Image Settings" msgstr "" -#: utilities/lighttable/lighttablebar.cpp:189 -msgid "Clear all" +#: utilities/imageeditor/tools/imageprint.cpp:382 +msgid "Image position:" msgstr "" -#: utilities/lighttable/lighttablebar.cpp:619 -msgid "Drag and drop images here" +#: utilities/imageeditor/tools/imageprint.cpp:386 +#: utilities/imageeditor/tools/imageprint.cpp:576 +#: utilities/imageeditor/tools/imageprint.cpp:623 +msgid "Top-Left" msgstr "" -#: utilities/lighttable/lighttablepreview.cpp:145 -msgid "Pan the image" +#: utilities/imageeditor/tools/imageprint.cpp:387 +#: utilities/imageeditor/tools/imageprint.cpp:592 +#: utilities/imageeditor/tools/imageprint.cpp:639 +msgid "Top-Central" msgstr "" -#: utilities/lighttable/lighttablepreview.cpp:195 -msgid "Drag and drop an image here" +#: utilities/imageeditor/tools/imageprint.cpp:388 +#: utilities/imageeditor/tools/imageprint.cpp:580 +#: utilities/imageeditor/tools/imageprint.cpp:627 +msgid "Top-Right" msgstr "" -#: utilities/lighttable/lighttablepreview.cpp:281 -msgid "" -"Unable to display preview for\n" -"\"%1\"" +#: utilities/imageeditor/tools/imageprint.cpp:389 +#: utilities/imageeditor/tools/imageprint.cpp:568 +#: utilities/imageeditor/tools/imageprint.cpp:615 +msgid "Central-Left" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:351 -msgid "On Left" +#: utilities/imageeditor/tools/imageprint.cpp:390 +#: utilities/imageeditor/tools/imageprint.cpp:648 +msgid "Central" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:355 -msgid "Show item on left panel" +#: utilities/imageeditor/tools/imageprint.cpp:391 +#: utilities/imageeditor/tools/imageprint.cpp:572 +#: utilities/imageeditor/tools/imageprint.cpp:619 +msgid "Central-Right" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:357 -msgid "On Right" +#: utilities/imageeditor/tools/imageprint.cpp:392 +#: utilities/imageeditor/tools/imageprint.cpp:584 +#: utilities/imageeditor/tools/imageprint.cpp:631 +msgid "Bottom-Left" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:361 -msgid "Show item on right panel" +#: utilities/imageeditor/tools/imageprint.cpp:393 +#: utilities/imageeditor/tools/imageprint.cpp:596 +#: utilities/imageeditor/tools/imageprint.cpp:643 +msgid "Bottom-Central" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:368 -msgid "Remove item from LightTable" +#: utilities/imageeditor/tools/imageprint.cpp:394 +#: utilities/imageeditor/tools/imageprint.cpp:588 +#: utilities/imageeditor/tools/imageprint.cpp:635 +msgid "Bottom-Right" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:373 -msgid "Remove all items from LightTable" +#: utilities/imageeditor/tools/imageprint.cpp:399 +msgid "Print fi&lename below image" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:388 -msgid "Synchronize" +#: utilities/imageeditor/tools/imageprint.cpp:403 +msgid "Print image in &black and white" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:393 -msgid "Synchronize preview from left and right panels" +#: utilities/imageeditor/tools/imageprint.cpp:407 +msgid "&Auto-rotate page" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:395 -msgid "By Pair" +#: utilities/imageeditor/tools/imageprint.cpp:415 +msgid "Use Color Management for Printing" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:400 -msgid "Navigate by pair with all items" +#: utilities/imageeditor/tools/imageprint.cpp:418 +msgid "Settings..." msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:510 -msgid "Exit fullscreen viewing mode" +#: utilities/imageeditor/tools/imageprint.cpp:428 +msgid "Scaling" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:540 -msgid "Zoom in on image" +#: utilities/imageeditor/tools/imageprint.cpp:432 +msgid "Scale image to &fit" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:545 -msgid "Zoom out from image" +#: utilities/imageeditor/tools/imageprint.cpp:435 +msgid "Print e&xact size: " msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:625 -msgid "No item on Light Table" +#: utilities/imageeditor/tools/imageprint.cpp:451 +#: utilities/imageeditor/tools/imageprint.cpp:545 +#: utilities/imageeditor/tools/imageprint.cpp:783 +#: utilities/imageeditor/tools/imageprint.cpp:801 +msgid "Millimeters" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:629 -msgid "1 item on Light Table" +#: utilities/imageeditor/tools/imageprint.cpp:452 +#: utilities/imageeditor/tools/imageprint.cpp:787 +#: utilities/imageeditor/tools/imageprint.cpp:805 +msgid "Centimeters" msgstr "" -#: utilities/lighttable/lighttablewindow.cpp:633 -msgid "%1 items on Light Table" +#: utilities/imageeditor/tools/imageprint.cpp:453 +#: utilities/imageeditor/tools/imageprint.cpp:809 +msgid "Inches" msgstr "" -#: utilities/cameragui/camerainfodialog.cpp:45 -#: utilities/cameragui/cameraui.cpp:454 -msgid "Camera Information" +#: utilities/imageeditor/tools/imageprint.cpp:455 +msgid "Keep ratio" msgstr "" -#: utilities/cameragui/camerainfodialog.cpp:52 -msgid "Summary" +#: utilities/imageeditor/tools/imageprint.cpp:758 +msgid "" +"
Color Management is disabled.
You " +"can enable it now by clicking on the \"Settings\" button.
" msgstr "" -#: utilities/cameragui/camerainfodialog.cpp:52 -msgid "Camera Summary" +#: utilities/imageeditor/tools/imageresize.cpp:147 +msgid "Resize Image" msgstr "" -#: utilities/cameragui/camerainfodialog.cpp:62 -msgid "Manual" +#: utilities/imageeditor/tools/imageresize.cpp:178 +msgid "New Size" msgstr "" -#: utilities/cameragui/camerainfodialog.cpp:62 -msgid "Camera Manual" +#: utilities/imageeditor/tools/imageresize.cpp:185 +msgid "Set here the new image width in pixels." msgstr "" -#: utilities/cameragui/camerainfodialog.cpp:72 -msgid "About Driver" +#: utilities/imageeditor/tools/imageresize.cpp:192 +msgid "
Set here the new image height in pixels."
msgstr ""
-#: utilities/cameragui/umscamera.cpp:487
-msgid ""
-"Mounted Camera driver for USB/IEEE1394 mass storage cameras and Flash "
-"disk card readers."
-"
"
-"
"
+#: utilities/imageeditor/tools/imageresize.cpp:199
+msgid "
Set here the new image width in percent."
msgstr ""
-#: utilities/cameragui/umscamera.cpp:490
-msgid "Title: %1
Model: %2
Port: %3
Path: %4
"
-msgstr ""
-
-#: utilities/cameragui/umscamera.cpp:503
-msgid ""
-"For more information about the Mounted Camera driver, please read "
-"Supported Digital Still Cameras section in the digiKam manual."
+#: utilities/imageeditor/tools/imageresize.cpp:201
+msgid "Height (%):"
msgstr ""
-#: utilities/cameragui/umscamera.cpp:511
-msgid ""
-"The Mounted Camera driver is a simple interface to a camera disk mounted "
-"locally on your system."
-"
"
-"
It doesn't use libgphoto2 drivers."
-"
"
-"
To report any problems with this driver, please contact the digiKam team "
-"at:"
-"
"
-"
http://www.digikam.org/?q=contact"
+#: utilities/imageeditor/tools/imageresize.cpp:206
+msgid "
Set here the new image height in percent." msgstr "" -#: utilities/cameragui/camerafolderview.cpp:62 -msgid "Camera Folders" +#: utilities/imageeditor/tools/imageresize.cpp:208 +msgid "Maintain aspect ratio" msgstr "" -#: utilities/cameragui/freespacewidget.cpp:184 -msgid "Album Library" +#: utilities/imageeditor/tools/imageresize.cpp:209 +msgid "
Enable this option to maintain aspect ratio with new image sizes." msgstr "" -#: utilities/cameragui/freespacewidget.cpp:196 -#: utilities/cameragui/freespacewidget.cpp:207 -msgid "Capacity:" +#: utilities/imageeditor/tools/imageresize.cpp:221 +msgid "Restore photograph" msgstr "" -#: utilities/cameragui/freespacewidget.cpp:199 -#: utilities/cameragui/freespacewidget.cpp:210 -msgid "Available:" +#: utilities/imageeditor/tools/imageresize.cpp:222 +msgid "" +"
Enable this option to restore photograph content. This way is usefull to " +"scale-up an image to an huge size. Warning: this process can take a while." msgstr "" -#: utilities/cameragui/freespacewidget.cpp:202 -msgid "Require:" +#: utilities/imageeditor/tools/imageresize.cpp:226 +msgid "" +"Note: use Restoration Mode to only scale-up an image to huge size. " +"Warning, this process can take a while." msgstr "" -#: utilities/cameragui/camerafolderdialog.cpp:52 -msgid "%1 - Select Camera Folder" +#: utilities/imageeditor/tools/imageresize.cpp:231 +msgid "
This shows the current progress when you use Restoration mode." msgstr "" -#: utilities/cameragui/camerafolderdialog.cpp:69 -msgid "" -"
Please select the camera folder where you want to upload the images.
" +#: utilities/imageeditor/tools/imageresize.cpp:551 +#: utilities/imageeditor/tools/imageresize.cpp:583 +msgid "Resize" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:143 -msgid "Camera filenames" +#: utilities/imageeditor/tools/imageresize.cpp:608 +msgid "Photograph Resizing Settings File to Load" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:144 -msgid "" -"Turn on this option to use camera provided image filenames without " -"modifications." +#: utilities/imageeditor/tools/imageresize.cpp:619 +msgid "\"%1\" is not a Photograph Resizing settings text file." msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:153 -msgid "Change case to:" +#: utilities/imageeditor/tools/imageresize.cpp:626 +msgid "Cannot load settings from the Photograph Resizing text file." msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:157 -msgid "Leave as Is" +#: utilities/imageeditor/tools/imageresize.cpp:635 +msgid "Photograph Resizing Settings File to Save" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:158 -msgid "Upper" +#: utilities/imageeditor/tools/imageresize.cpp:644 +msgid "Cannot save settings to the Photograph Resizing text file." msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:159 -msgid "Lower" +#: utilities/lighttable/lighttablebar.cpp:174 +msgid "Show on left panel" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:161 -msgid "
Set the method to use to change the case of image filenames." +#: utilities/lighttable/lighttablebar.cpp:175 +msgid "Show on right panel" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:173 -msgid "Customize" +#: utilities/lighttable/lighttablebar.cpp:176 +#: utilities/lighttable/lighttablewindow.cpp:363 +msgid "Edit" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:175 -msgid "
Turn on this option to customize image filenames during download." +#: utilities/lighttable/lighttablebar.cpp:185 +msgid "Remove item" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:187 -msgid "Prefix:" +#: utilities/lighttable/lighttablebar.cpp:189 +msgid "Clear all" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:192 -msgid "
Set the prefix which will be added to image filenames." +#: utilities/lighttable/lighttablebar.cpp:619 +msgid "Drag and drop images here" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:195 -msgid "Suffix:" +#: utilities/lighttable/lighttablepreview.cpp:145 +msgid "Pan the image" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:199 -msgid "
Set the suffix which will be added to image filenames." +#: utilities/lighttable/lighttablepreview.cpp:195 +msgid "Drag and drop an image here" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:202 -msgid "Add Date && Time" +#: utilities/lighttable/lighttablepreview.cpp:281 +msgid "" +"Unable to display preview for\n" +"\"%1\"" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:204 -msgid "
Set this option to add the camera provided date and time." +#: utilities/lighttable/lighttablewindow.cpp:351 +msgid "On Left" msgstr "" -#: utilities/cameragui/cameraui.cpp:279 -#: utilities/cameragui/renamecustomizer.cpp:207 -msgid "Date format:" +#: utilities/lighttable/lighttablewindow.cpp:355 +msgid "Show item on left panel" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:209 -msgid "Standard" +#: utilities/lighttable/lighttablewindow.cpp:357 +msgid "On Right" msgstr "" -#: utilities/cameragui/cameraui.cpp:281 -#: utilities/cameragui/renamecustomizer.cpp:210 -msgid "ISO" +#: utilities/lighttable/lighttablewindow.cpp:361 +msgid "Show item on right panel" msgstr "" -#: utilities/cameragui/cameraui.cpp:282 -#: utilities/cameragui/renamecustomizer.cpp:211 -msgid "Full Text" +#: utilities/lighttable/lighttablewindow.cpp:368 +msgid "Remove item from LightTable" msgstr "" -#: utilities/cameragui/cameraui.cpp:283 -#: utilities/cameragui/renamecustomizer.cpp:212 -msgid "Local Settings" +#: utilities/lighttable/lighttablewindow.cpp:373 +msgid "Remove all items from LightTable" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:213 -msgid "Advanced..." +#: utilities/lighttable/lighttablewindow.cpp:388 +msgid "Synchronize" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:214 -msgid "" -"
Select your preferred date format for creating new albums. The options " -"available are:
" -"Standard: the date format that has been used as a standard by " -"digiKam. E.g.: 20060824T142618
ISO" -": the date format according to ISO 8601 (YYYY-MM-DD). E.g.: " -"2006-08-24T14:26:18" -"Full Text: the date format is a user-readable string. E.g.: " -"Thu Aug 24 14:26:18 2006
" -"Local Settings: the date format depending on TDE control panel " -"settings.
" -"Advanced: allows the user to specify a custom date format.
" +#: utilities/lighttable/lighttablewindow.cpp:393 +msgid "Synchronize preview from left and right panels" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:234 -msgid "Add Camera Name" +#: utilities/lighttable/lighttablewindow.cpp:395 +msgid "By Pair" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:236 -msgid "Set this option to add the camera name." +#: utilities/lighttable/lighttablewindow.cpp:400 +msgid "Navigate by pair with all items" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:238 -msgid "Add Sequence Number" +#: utilities/lighttable/lighttablewindow.cpp:510 +msgid "Exit fullscreen viewing mode" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:240 -msgid "" -"
Set this option to add a sequence number starting with the index set below." +#: utilities/lighttable/lighttablewindow.cpp:540 +msgid "Zoom in on image" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:243 -msgid "Start Index:" +#: utilities/lighttable/lighttablewindow.cpp:545 +msgid "Zoom out from image" msgstr "" -#: utilities/cameragui/renamecustomizer.cpp:246 -msgid "" -"
Set the starting index value used to rename files with a sequence number."
+#: utilities/lighttable/lighttablewindow.cpp:625
+msgid "No item on Light Table"
msgstr ""
-#: utilities/cameragui/renamecustomizer.cpp:436
-msgid ""
-" Enter the format for date and time. Use dd for the day, MM for the month, yyyy "
-"for the year, hh for the hour, mm for the minute, ss "
-"for the second. Examples: yyyyMMddThhmmss for 20060824T142418,"
-"
yyyy-MM-dd hh:mm:ss for 2006-08-24 14:24:18.
Select the camera name that you want to use. All default settings on the " +"right panel will be set automatically.
This list has been generated " +"using the gphoto2 library installed on your computer.
" msgstr "" -#: utilities/cameragui/albumselectdialog.cpp:300 -msgid "New Album Name" +#: utilities/setup/cameraselection.cpp:131 +msgid "Camera Title" msgstr "" -#: utilities/cameragui/albumselectdialog.cpp:301 +#: utilities/setup/cameraselection.cpp:133 msgid "" -"Creating new album in '%1'\n" -"Enter album name:" +"Set here the name used in digiKam interface to identify this camera.
" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:217 -msgid "Connecting to camera..." +#: utilities/setup/cameraselection.cpp:138 +msgid "Camera Port Type" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:226 -msgid "Connection established" +#: utilities/setup/cameraselection.cpp:142 +msgid "USB" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:228 -msgid "Connection failed" +#: utilities/setup/cameraselection.cpp:143 +msgid "" +"Select this option if your camera is connected to your computer using an " +"USB cable.
" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:234 -msgid "Getting camera information..." +#: utilities/setup/cameraselection.cpp:147 +msgid "Serial" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:251 -msgid "Listing folders..." +#: utilities/setup/cameraselection.cpp:148 +msgid "" +"Select this option if your camera is connected to your computer using a " +"serial cable.
" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:265 -msgid "The folders have been listed." +#: utilities/setup/cameraselection.cpp:153 +msgid "Camera Port Path" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:273 -msgid "The files in %1 have been listed." +#: utilities/setup/cameraselection.cpp:155 +msgid "Note: only for serial port camera" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:279 -#, c-format -msgid "Failed to list files in %1" +#: utilities/setup/cameraselection.cpp:159 +msgid "" +"Select the serial port to use on your computer. This option is only " +"required if you use a serial camera.
" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:295 -msgid "Listing files in %1 is complete" +#: utilities/setup/cameraselection.cpp:164 +msgid "Camera Mount Path" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:304 -msgid "Getting thumbnails..." +#: utilities/setup/cameraselection.cpp:167 +msgid "Note: only for USB/IEEE mass storage camera" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:327 -msgid "Getting EXIF information for %1/%2..." +#: utilities/setup/cameraselection.cpp:171 +msgid "" +"Set here the mount path to use on your computer. This option is only " +"required if you use a USB Mass Storage camera.
" msgstr "" -#: utilities/cameragui/cameracontroller.cpp:366 -msgid "Downloading file %1..." +#: utilities/setup/cameraselection.cpp:188 +msgid "" +"To set a USB Mass Storage camera
(which looks like a removable "
+"drive when mounted on your desktop), please
use %1"
+"a> from camera list.
To set a Generic PTP USB Device
(which uses the Picture "
+"Transfer Protocol), please
use %1 from the "
+"camera list.
A complete list of camera settings to use is
available at this url.
Set how digiKam will rename files as they are downloaded." +#: utilities/setup/setup.cpp:194 +msgid "Camera Settings" msgstr "" -#: utilities/cameragui/cameraui.cpp:270 -msgid "File Renaming Options" +#: utilities/setup/setup.cpp:198 +msgid "Miscellaneous Settings" msgstr "" -#: utilities/cameragui/cameraui.cpp:276 -msgid "Extension-based sub-albums" +#: utilities/setup/setup.cpp:245 +msgid "" +"The Exif auto-rotate thumbnails option has been changed.\n" +"Do you want to rebuild all albums' items' thumbnails now?\n" +"\n" +"Note: thumbnail processing can take a while! You can start this job later " +"from the \"Tools\" menu." msgstr "" -#: utilities/cameragui/cameraui.cpp:277 -msgid "Date-based sub-albums" +#: utilities/setup/setupcamera.cpp:87 +msgid "Title" msgstr "" -#: utilities/cameragui/cameraui.cpp:289 -msgid "
Set how digiKam creates albums automatically when downloading." +#: utilities/setup/setupcamera.cpp:89 +msgid "Port" msgstr "" -#: utilities/cameragui/cameraui.cpp:290 -msgid "" -"
Enable this option if you want to download your pictures into automatically " -"created file extension-based sub-albums of the destination album. This way, you " -"can separate JPEG and RAW files as they are downloaded from your camera." +#: utilities/setup/setupcamera.cpp:90 +msgid "Path" msgstr "" -#: utilities/cameragui/cameraui.cpp:293 +#: utilities/setup/setupcamera.cpp:93 msgid "" -"
Enable this option if you want to download your pictures into automatically " -"created file date-based sub-albums of the destination album." +"
Here you can see the digital camera list used by digiKam via the Gphoto " +"interface." msgstr "" -#: utilities/cameragui/cameraui.cpp:296 -msgid "" -"
Select your preferred date format used to create new albums. The options " -"available are:" -"
ISO: the date format is in accordance with ISO 8601 (YYYY-MM-DD). " -"E.g.: 2006-08-24" -"
Full Text: the date format is in a user-readable string. E.g.: " -"Thu Aug 24 2006" -"
Local Settings: the date format depending on TDE control panel " -"settings." -"
" +#: utilities/setup/setupcamera.cpp:103 utilities/setup/setupcollections.cpp:100 +msgid "&Add..." msgstr "" -#: utilities/cameragui/cameraui.cpp:305 -msgid "Auto-creation of Albums" +#: utilities/setup/setupcamera.cpp:105 +msgid "&Remove" msgstr "" -#: utilities/cameragui/cameraui.cpp:311 -msgid "Set default photographer identity" +#: utilities/setup/setupcamera.cpp:107 +msgid "&Edit..." msgstr "" -#: utilities/cameragui/cameraui.cpp:312 -msgid "Set default credit and copyright" +#: utilities/setup/setupcamera.cpp:109 +msgid "Auto-&Detect" msgstr "" -#: utilities/cameragui/cameraui.cpp:313 -msgid "Fix internal date && time" +#: utilities/setup/setupcamera.cpp:122 +msgid "Visit Gphoto project website" msgstr "" -#: utilities/cameragui/cameraui.cpp:315 -msgid "Auto-rotate/flip image" +#: utilities/setup/setupcamera.cpp:245 +msgid "" +"Failed to auto-detect camera.\n" +"Please check if your camera is turned on and retry or try setting it " +"manually." msgstr "" -#: utilities/cameragui/cameraui.cpp:316 -msgid "Convert to lossless file format" +#: utilities/setup/setupcamera.cpp:257 +msgid "Camera '%1' (%2) is already in list." msgstr "" -#: utilities/cameragui/cameraui.cpp:318 -msgid "New image format:" +#: utilities/setup/setupcamera.cpp:261 +msgid "Found camera '%1' (%2) and added it to the list." msgstr "" -#: utilities/cameragui/cameraui.cpp:330 +#: utilities/setup/setupcollections.cpp:94 msgid "" -"
Set here all options to fix/transform JPEG files automatically as they are " -"downloaded." +"
You can add or remove Album collection types here to improve how your " +"Albums are sorted in digiKam." msgstr "" -#: utilities/cameragui/cameraui.cpp:332 -msgid "" -"
Enable this option if you want images automatically rotated or flipped using " -"EXIF information provided by the camera." +#: utilities/setup/setupcollections.cpp:101 +msgid "&Delete" msgstr "" -#: utilities/cameragui/cameraui.cpp:334 -msgid "" -"
Enable this option to store the default photographer identity in the IPTC " -"tags using digiKam's metadata settings." +#: utilities/setup/setupcollections.cpp:180 +#: utilities/setup/setupcollections.cpp:185 +msgid "New Collection Name" msgstr "" -#: utilities/cameragui/cameraui.cpp:336 -msgid "" -"
Enable this option to store the default credit and copyright information in " -"the IPTC tags using digiKam's metadata settings." +#: utilities/setup/setupcollections.cpp:181 +#: utilities/setup/setupcollections.cpp:186 +msgid "Enter new collection name:" msgstr "" -#: utilities/cameragui/cameraui.cpp:338 -msgid "" -"
Enable this option to set date and time metadata tags to the right values if " -"your camera does not set these tags correctly when pictures are taken. The " -"values will be saved in the DateTimeDigitized and DateTimeCreated EXIF/IPTC " -"fields." +#: utilities/setup/setupeditor.cpp:97 +msgid "
Customize background color to use in image editor area." msgstr "" -#: utilities/cameragui/cameraui.cpp:342 +#: utilities/setup/setupeditor.cpp:115 msgid "" -"
Enable this option to automatically convert all JPEG files to a lossless " -"image format. Note: Image conversion can take a while on a slow " -"computer." +"
Customize the color used in image editor to identify under-exposed pixels." msgstr "" -#: utilities/cameragui/cameraui.cpp:345 +#: utilities/setup/setupeditor.cpp:122 msgid "" -"
Select your preferred lossless image file format to convert to. Note: " -"All metadata will be preserved during the conversion." +"
Customize the color used in image editor to identify over-exposed pixels." msgstr "" -#: utilities/cameragui/cameraui.cpp:349 -msgid "On the Fly Operations (JPEG only)" +#: utilities/setup/setupgeneral.cpp:113 +msgid "Album &Library Path" msgstr "" -#: utilities/cameragui/cameraui.cpp:351 -msgid "Settings" +#: utilities/setup/setupgeneral.cpp:117 +msgid "" +"
Here you can set the main path to the digiKam album library in your " +"computer.
Write access is required for this path and do not use a remote " +"path here, like an NFS mounted file system." msgstr "" -#: utilities/cameragui/cameraui.cpp:411 -msgid "Select &All" +#: utilities/setup/setupgeneral.cpp:132 +msgid "Thumbnail Information" msgstr "" -#: utilities/cameragui/cameraui.cpp:412 -msgid "Select N&one" +#: utilities/setup/setupgeneral.cpp:134 +msgid "Show file &name" msgstr "" -#: utilities/cameragui/cameraui.cpp:413 -msgid "&Invert Selection" +#: utilities/setup/setupgeneral.cpp:135 +msgid "
Set this option to show the file name below the image thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:415 -msgid "Select &New Items" +#: utilities/setup/setupgeneral.cpp:137 +msgid "Show file si&ze" msgstr "" -#: utilities/cameragui/cameraui.cpp:417 -msgid "Increase Thumbnail Size" +#: utilities/setup/setupgeneral.cpp:138 +msgid "
Set this option to show the file size below the image thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:418 -msgid "Decrease Thumbnail Size" +#: utilities/setup/setupgeneral.cpp:140 +msgid "Show camera creation &date" msgstr "" -#: utilities/cameragui/cameraui.cpp:420 -msgid "Toggle Lock" +#: utilities/setup/setupgeneral.cpp:141 +msgid "" +"
Set this option to show the camera creation date below the image " +"thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:426 -msgid "Download Selected" +#: utilities/setup/setupgeneral.cpp:144 +msgid "Show file &modification date" msgstr "" -#: utilities/cameragui/cameraui.cpp:428 -msgid "Download All" +#: utilities/setup/setupgeneral.cpp:145 +msgid "" +"
Set this option to show the file modification date below the image " +"thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:431 -msgid "Download/Delete Selected" +#: utilities/setup/setupgeneral.cpp:148 +msgid "Show digiKam &captions" msgstr "" -#: utilities/cameragui/cameraui.cpp:433 -msgid "Download/Delete All" +#: utilities/setup/setupgeneral.cpp:149 +msgid "" +"
Set this option to show the digiKam captions below the image thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:436 -msgid "Upload..." +#: utilities/setup/setupgeneral.cpp:152 +msgid "Show digiKam &tags" msgstr "" -#: utilities/cameragui/cameraui.cpp:445 -msgid "Delete Selected" +#: utilities/setup/setupgeneral.cpp:153 +msgid "
Set this option to show the digiKam tags below the image thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:680 -msgid "Cancelling current operation, please wait..." +#: utilities/setup/setupgeneral.cpp:156 +msgid "Show digiKam &rating" msgstr "" -#: utilities/cameragui/cameraui.cpp:708 -msgid "Do you want to close the dialog and cancel the current operation?" +#: utilities/setup/setupgeneral.cpp:157 +msgid "" +"
Set this option to show the digiKam rating below the image thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:714 -msgid "Disconnecting from camera, please wait..." +#: utilities/setup/setupgeneral.cpp:160 +msgid "Show ima&ge dimensions (warning: slow)" msgstr "" -#: utilities/cameragui/cameraui.cpp:750 -msgid "Scanning for new files, please wait..." +#: utilities/setup/setupgeneral.cpp:161 +msgid "" +"
Set this option to show the image size in pixels below the image " +"thumbnail." msgstr "" -#: utilities/cameragui/cameraui.cpp:791 -msgid "Ready" +#: utilities/setup/setupgeneral.cpp:173 +msgid "Sidebar thumbnail size:" msgstr "" -#: utilities/cameragui/cameraui.cpp:863 +#: utilities/setup/setupgeneral.cpp:179 msgid "" -"Failed to connect to the camera. Please make sure it is connected properly and " -"turned on. Would you like to try again?" +"
Set this option to configure the size in pixels of the thumbnails in " +"digiKam's sidebars. This option will take effect when you restart digiKam." msgstr "" -#: utilities/cameragui/cameraui.cpp:867 -msgid "Connection Failed" +#: utilities/setup/setupgeneral.cpp:186 +msgid "Show count of items in all tree-view" msgstr "" -#: utilities/cameragui/cameraui.cpp:868 -msgid "Retry" +#: utilities/setup/setupgeneral.cpp:190 +msgid "Thumbnail click action:" msgstr "" -#: utilities/cameragui/cameraui.cpp:1028 -msgid "Select Image to Upload" +#: utilities/setup/setupgeneral.cpp:192 +msgid "Show embedded preview" msgstr "" -#: utilities/cameragui/cameraui.cpp:1063 +#: utilities/setup/setupgeneral.cpp:193 +msgid "Start image editor" +msgstr "" + +#: utilities/setup/setupgeneral.cpp:194 +msgid "
Here, choose what should happen when you click on a thumbnail."
+msgstr ""
+
+#: utilities/setup/setupgeneral.cpp:199
+msgid "Embedded preview loads full image size"
+msgstr ""
+
+#: utilities/setup/setupgeneral.cpp:200
msgid ""
-"Camera Folder %1 already contains item %2"
-"
Please enter a new file name (without extension):"
+"
Set this option to load the full image size with an embedded preview, " +"instead a reduced one. Because this option will take more time to load " +"images, use it only if you have a fast computer." msgstr "" -#: utilities/cameragui/cameraui.cpp:1067 utilities/cameragui/cameraui.cpp:1070 -msgid "File already exists" +#: utilities/setup/setupgeneral.cpp:281 +msgid "Sorry you can't use your home directory as album library." msgstr "" -#: utilities/cameragui/cameraui.cpp:1124 +#: utilities/setup/setupgeneral.cpp:289 msgid "" -"There is no enough free space on Album Library Path to download and process " -"selected pictures from camera.\n" -"\n" -"Estimated space require: %1\n" -"Available free space: %2" +"No write access for this path.\n" +"Warning: the caption and tag features will not work." msgstr "" -#: utilities/cameragui/cameraui.cpp:1166 +#: utilities/setup/setupicc.cpp:157 +msgid "Color Management Policy" +msgstr "" + +#: utilities/setup/setupicc.cpp:161 +msgid "Enable Color Management" +msgstr "" + +#: utilities/setup/setupicc.cpp:162 msgid "" -"
Please select the destination album from the digiKam library to import the " -"camera pictures into.
" +"If this option is enabled, digiKam applies the Workspace default color " +"profile to an image, without prompting you about missing embedded profiles " +"or embedded profiles different from the workspace profile.
" msgstr "" -#: utilities/cameragui/cameraui.cpp:1466 -#, c-format +#: utilities/setup/setupicc.cpp:185 +msgid "Ask when opening an image in the Image Editor" +msgstr "" + +#: utilities/setup/setupicc.cpp:186 msgid "" -"_n: About to delete this image. Deleted files are unrecoverable. Are you sure?\n" -"About to delete these %n images. Deleted files are unrecoverable. Are you sure?" +"If this option is enabled, digiKam asks to user before it applies the " +"Workspace default color profile to an image which has no embedded profile " +"or, if the image has an embedded profile, when it's not the same as the " +"workspace profile.
" msgstr "" -#: utilities/cameragui/cameraui.cpp:1623 -msgid "A file with same name (%1) exists in folder %2" +#: utilities/setup/setupicc.cpp:201 +msgid "Color Profiles Directory" msgstr "" -#: utilities/cameragui/cameraui.cpp:1636 -msgid "Failed to find Album for path '%1'" +#: utilities/setup/setupicc.cpp:206 +msgid "" +"Default path to the color profiles folder. You must store all your color " +"profiles in this directory.
" +msgstr "" + +#: utilities/setup/setupicc.cpp:213 +msgid "ICC Profiles Settings" +msgstr "" + +#: utilities/setup/setupicc.cpp:218 +msgid "Use color managed view (warning: slow)" msgstr "" -#: utilities/cameragui/gpcamera.cpp:956 +#: utilities/setup/setupicc.cpp:219 msgid "" -"Title: %1\n" -"Model: %2\n" -"Port: %3\n" -"Path: %4\n" -"\n" -"Thumbnails: %5\n" -"Delete items: %6\n" -"Upload items: %7\n" -"Create directories: %8\n" -"Delete directories: %9\n" -"\n" +"Turn on this option if you want to use your Monitor Color Profile " +"to show your pictures in the Image Editor window with a color correction " +"adapted to your monitor. Warning: this option can take a while to render " +"pictures on the screen, especially with a slow computer.
" msgstr "" -#: utilities/cameragui/gpcamera.cpp:969 utilities/cameragui/gpcamera.cpp:970 -#: utilities/cameragui/gpcamera.cpp:971 utilities/cameragui/gpcamera.cpp:972 -#: utilities/cameragui/gpcamera.cpp:973 -msgid "yes" +#: utilities/setup/setupicc.cpp:227 +msgid "Monitor:" msgstr "" -#: utilities/cameragui/gpcamera.cpp:969 utilities/cameragui/gpcamera.cpp:970 -#: utilities/cameragui/gpcamera.cpp:971 utilities/cameragui/gpcamera.cpp:972 -#: utilities/cameragui/gpcamera.cpp:973 -msgid "no" +#: utilities/setup/setupicc.cpp:230 +msgid "" +"Select the color profile for your monitor. You need to enable the Use " +"color managed view option to use this profile.
" msgstr "" -#: utilities/cameragui/gpcamera.cpp:1036 +#: utilities/setup/setupicc.cpp:233 msgid "" -"\n" -"\n" -"To report problems about this driver, please contact the gphoto2 team at:\n" -"\n" -"http://gphoto.org/bugs" +"You can use this button to get more detailed information about the " +"selected monitor profile.
" msgstr "" -#: utilities/cameragui/cameraiconview.cpp:588 -msgid "Download" +#: utilities/setup/setupicc.cpp:244 +msgid "Workspace:" msgstr "" -#: utilities/cameragui/cameraiconview.cpp:589 -msgid "Download && Delete" +#: utilities/setup/setupicc.cpp:247 +msgid "" +"All the images will be converted to the color space of this profile, so " +"you must select a profile appropriate for editing.
These color " +"profiles are device independent.
" msgstr "" -#: utilities/cameragui/cameraiconview.cpp:590 -msgid "Toggle lock" +#: utilities/setup/setupicc.cpp:251 +msgid "" +"You can use this button to get more detailed information about the " +"selected workspace profile.
" msgstr "" -#: utilities/cameragui/cameraiconview.cpp:755 -msgid "&Upload to camera" +#: utilities/setup/setupicc.cpp:261 +msgid "Input:" msgstr "" -#: utilities/slideshow/slideshow.cpp:433 +#: utilities/setup/setupicc.cpp:264 msgid "" -"Cannot display image\n" -"\"%1\"" +"You must select the profile for your input device (usually, your camera, " +"scanner...)
" msgstr "" -#: utilities/slideshow/slideshow.cpp:451 -msgid "SlideShow Completed." +#: utilities/setup/setupicc.cpp:267 +msgid "" +"You can use this button to get more detailed information about the " +"selected input profile.
" msgstr "" -#: utilities/slideshow/slideshow.cpp:452 -msgid "Click To Exit..." +#: utilities/setup/setupicc.cpp:277 +msgid "Soft proof:" +msgstr "" + +#: utilities/setup/setupicc.cpp:280 +msgid "" +"You must select the profile for your output device (usually, your " +"printer). This profile will be used to do a soft proof, so you will be able " +"to preview how an image will be rendered via an output device.
" +msgstr "" + +#: utilities/setup/setupicc.cpp:284 +msgid "" +"You can use this button to get more detailed information about the " +"selected soft proof profile.
" +msgstr "" + +#: utilities/setup/setupicc.cpp:299 +msgid "Use black point compensation" +msgstr "" + +#: utilities/setup/setupicc.cpp:300 +msgid "" +"Black Point Compensation is a way to make adjustments between the " +"maximum black levels of digital files and the black capabilities of various " +"digital devices.
" +msgstr "" + +#: utilities/setup/setupicc.cpp:307 +msgid "Rendering Intents:" +msgstr "" + +#: utilities/setup/setupicc.cpp:314 +msgid "" +"Perceptual intent causes the full gamut of the image to be " +"compressed or expanded to fill the gamut of the destination device, so that " +"gray balance is preserved but colorimetric accuracy may not be preserved." +"p>
In other words, if certain colors in an image fall outside of the range " +"of colors that the output device can render, the image intent will cause all " +"the colors in the image to be adjusted so that the every color in the image " +"falls within the range that can be rendered and so that the relationship " +"between colors is preserved as much as possible.
This intent is most " +"suitable for display of photographs and images, and is the default intent." +"p>
Absolute Colorimetric intent causes any colors that " +"fall outside the range that the output device can render are adjusted to the " +"closest color that can be rendered, while all other colors are left " +"unchanged.
This intent preserves the white point and is most suitable " +"for spot colors (Pantone, TruMatch, logo colors, ...).
" +"li>Relative Colorimetric intent is defined such that any " +"colors that fall outside the range that the output device can render are " +"adjusted to the closest color that can be rendered, while all other colors " +"are left unchanged. Proof intent does not preserve the white point.
" +"li>Saturation intent preserves the saturation of colors in the " +"image at the possible expense of hue and lightness.
Implementation of " +"this intent remains somewhat problematic, and the ICC is still working on " +"methods to achieve the desired effects.
This intent is most suitable " +"for business graphics such as charts, where it is more important that the " +"colors be vivid and contrast well with each other rather than a specific " +"color.
You must set a correct default path for your ICC color profiles files.
" +msgstr "" + +#: utilities/setup/setupicc.cpp:484 +msgid "Sorry, there are no ICC profiles files in " +msgstr "" + +#: utilities/setup/setupicc.cpp:486 +msgid "
" +msgstr "" + +#: utilities/setup/setupicc.cpp:551 +msgid "The following profile is invalid:
" +msgstr "" + +#: utilities/setup/setupicc.cpp:555 +msgid "Invalid Profile" +msgstr "" + +#: utilities/setup/setupicc.cpp:559 +msgid "Invalid color profile has been removed" +msgstr "" + +#: utilities/setup/setupicc.cpp:563 +msgid "" +"
digiKam has failed to remove the invalid color profile
You have to " +"do it manually
" +msgstr "" + +#: utilities/setup/setupicc.cpp:691 +msgid "Sorry, there is not any selected profile" +msgstr "" + +#: utilities/setup/setupidentity.cpp:81 +msgid "Photographer and Copyright Information" +msgstr "" + +#: utilities/setup/setupidentity.cpp:84 +msgid "Author:" +msgstr "" + +#: utilities/setup/setupidentity.cpp:91 +msgid "" +"This field should contain your name, or the name of the person who " +"created the photograph. If it is not appropriate to add the name of the " +"photographer (for example, if the identify of the photographer needs to be " +"protected) the name of a company or organization can also be used. Once " +"saved, this field should not be changed by anyone. This field does not " +"support the use of commas or semi-colons as separator. \n" +"This field is limited to 32 ASCII characters.
" +msgstr "" + +#: utilities/setup/setupidentity.cpp:97 +msgid "Author Title:" +msgstr "" + +#: utilities/setup/setupidentity.cpp:104 +msgid "" +"This field should contain the job title of the photographer. Examples " +"might include titles such as: Staff Photographer, Freelance Photographer, or " +"Independent Commercial Photographer. Since this is a qualifier for the " +"Author field, the Author field must also be filled out. \n" +"This field is limited to 32 ASCII characters.
" +msgstr "" + +#: utilities/setup/setupidentity.cpp:111 +msgid "Credit and Copyright" +msgstr "" + +#: utilities/setup/setupidentity.cpp:114 +msgid "Credit:" +msgstr "" + +#: utilities/setup/setupidentity.cpp:121 +msgid "" +"(synonymous to Provider): Use the Provider field to identify who is " +"providing the photograph. This does not necessarily have to be the author. " +"If a photographer is working for a news agency such as Reuters or the " +"Associated Press, these organizations could be listed here as they are " +"\"providing\" the image for use by others. If the image is a stock " +"photograph, then the group (agency) involved in supplying the image should " +"be listed here. \n" +"This field is limited to 32 ASCII characters.
" +msgstr "" + +#: utilities/setup/setupidentity.cpp:128 +msgid "Source:" +msgstr "" + +#: utilities/setup/setupidentity.cpp:135 +msgid "" +"The Source field should be used to identify the original owner or " +"copyright holder of the photograph. The value of this field should never be " +"changed after the information is entered following the image's creation. " +"While not yet enforced by the custom panels, you should consider this to be " +"a \"write-once\" field. The source could be an individual, an agency, or a " +"member of an agency. To aid in later searches, it is suggested to separate " +"any slashes \"/\" with a blank space. Use the form \"photographer / agency\" " +"rather than \"photographer/agency.\" Source may also be different from " +"Creator and from the names listed in the Copyright Notice.\n" +"This field is limited to 32 ASCII characters.
" +msgstr "" + +#: utilities/setup/setupidentity.cpp:144 +msgid "Copyright:" +msgstr "" + +#: utilities/setup/setupidentity.cpp:151 +msgid "" +"The Copyright Notice should contain any necessary copyright notice for " +"claiming the intellectual property, and should identify the current owner(s) " +"of the copyright for the photograph. Usually, this would be the " +"photographer, but if the image was done by an employee or as work-for-hire, " +"then the agency or company should be listed. Use the form appropriate to " +"your country. USA: © {date of first publication} name of copyright " +"owner, as in \"©2005 John Doe.\" Note, the word \"copyright\" or the " +"abbreviation \"copr\" may be used in place of the © symbol. In some " +"foreign countries only the copyright symbol is recognized and the " +"abbreviation does not work. Furthermore the copyright symbol must be a full " +"circle with a \"c\" inside; using something like (c) where the parentheses " +"form a partial circle is not sufficient. For additional protection " +"worldwide, use of the phrase, \"all rights reserved\" following the notice " +"above is encouraged. \n" +"In Europe you would use: Copyright {Year} {Copyright owner}, all rights " +"reserved. \n" +"In Japan, for maximum protection, the following three items should appear in " +"the copyright field of the IPTC Core: (a) the word, Copyright; (b) year of " +"the first publication; and (c) name of the author. You may also wish to " +"include the phrase \"all rights reserved.\"\n" +"This field is limited to 128 ASCII characters.
" +msgstr "" + +#: utilities/setup/setupidentity.cpp:169 +msgid "" +"Note: These informations are used to set IPTC tags contents. IPTC text tags only support the " +"printable ASCII " +"characters set and limit strings size. Use contextual help for details." +msgstr "" + +#: utilities/setup/setuplighttable.cpp:77 +msgid "Synchronize panels automatically" +msgstr "" + +#: utilities/setup/setuplighttable.cpp:78 +msgid "" +"Set this option to automatically synchronize zooming and panning between " +"left and right panels if the images have the same size." +msgstr "" + +#: utilities/setup/setuplighttable.cpp:82 +msgid "Selecting a thumbbar item loads image to the right panel" +msgstr "" + +#: utilities/setup/setuplighttable.cpp:84 +msgid "" +"
Set this option to automatically load an image into the right panel when " +"the corresponding item is selected on the thumbbar." +msgstr "" + +#: utilities/setup/setuplighttable.cpp:87 +msgid "Load full image size" +msgstr "" + +#: utilities/setup/setuplighttable.cpp:88 +msgid "" +"
Set this option to load full image size into the preview panel instead of " +"a reduced size. Because this option will take more time to load images, use " +"it only if you have a fast computer." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:106 +msgid "IPTC Actions" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:109 +msgid "&Save image tags as \"Keywords\" tag" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:110 +msgid "" +"
Turn this option on to store the image tags in the IPTC Keywords " +"tag." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:114 +msgid "&Save default photographer identity as tags" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:115 +msgid "" +"
Turn this option on to store the default photographer identity in the " +"IPTC tags. You can set this value in the Identity setup page." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:120 +msgid "&Save default credit and copyright identity as tags" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:121 +msgid "" +"
Turn this option on to store the default credit and copyright identity in " +"the IPTC tags. You can set this value in the Identity setup page." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:127 +msgid "Common Metadata Actions" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:130 +msgid "&Save image captions as embedded text" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:131 +msgid "" +"
Turn this option on to store image captions in the JFIF section, EXIF " +"tag, and IPTC tag." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:135 +msgid "&Save image timestamps as tags" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:136 +msgid "" +"
Turn this option on to store the image date and time in the EXIF and IPTC " +"tags." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:140 +msgid "&Save image rating as tags" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:141 +msgid "" +"
Turn this option on to store the image rating in the EXIF tag and IPTC " +"Urgency tag." +msgstr "" + +#: utilities/setup/setupmetadata.cpp:154 +msgid "Visit Exiv2 project website" +msgstr "" + +#: utilities/setup/setupmetadata.cpp:157 +msgid "" +"
EXIF is a standard " +"used by most digital cameras today to store technical informations about " +"photograph.
IPTC" +"b> is an standard used in digital photography to store photographer " +"informations in pictures.
" +msgstr "" + +#: utilities/setup/setupmime.cpp:94 +msgid "Show only &image files with extensions:" +msgstr "" + +#: utilities/setup/setupmime.cpp:98 +msgid "" +"Here you can set the extensions of image files to be displayed in Albums " +"(such as JPEG or TIFF); clicking on these files will open them in the " +"digiKam Image Editor." +msgstr "" + +#: utilities/setup/setupmime.cpp:107 utilities/setup/setupmime.cpp:138 +#: utilities/setup/setupmime.cpp:169 utilities/setup/setupmime.cpp:199 +msgid "Revert to default settings" +msgstr "" + +#: utilities/setup/setupmime.cpp:125 +msgid "Show only &movie files with extensions:" +msgstr "" + +#: utilities/setup/setupmime.cpp:129 +msgid "" +"
Here you can set the extensions of movie files to be displayed in Albums " +"(such as MPEG or AVI); clicking on these files will open them with the " +"default TDE movie player." +msgstr "" + +#: utilities/setup/setupmime.cpp:156 +msgid "Show only &audio files with extensions:" +msgstr "" + +#: utilities/setup/setupmime.cpp:160 +msgid "" +"
Here you can set the extensions of audio files to be displayed in Albums " +"(such as MP3 or OGG); clicking on these files will open them with the " +"default TDE audio player." +msgstr "" + +#: utilities/setup/setupmime.cpp:187 +msgid "Show only &RAW files with extensions:" +msgstr "" + +#: utilities/setup/setupmime.cpp:191 +msgid "" +"
Here you can set the extensions of RAW image files to be displayed in " +"Albums (such as CRW, for Canon cameras, or NEF, for Nikon cameras)." +msgstr "" + +#: utilities/setup/setupmisc.cpp:72 +msgid "Show confirmation dialog when moving items to the &trash" +msgstr "" + +#: utilities/setup/setupmisc.cpp:77 +msgid "Apply changes in the &right sidebar without confirmation" +msgstr "" + +#: utilities/setup/setupmisc.cpp:87 +msgid "&Scan for new items on startup (slows down startup)" +msgstr "" + +#: utilities/setup/setupplugins.cpp:78 +msgid "
A list of available Kipi plugins appears below." +msgstr "" + +#: utilities/setup/setupplugins.cpp:95 +#, c-format +msgid "" +"_n: 1 Kipi plugin found\n" +"%n Kipi plugins found" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:84 +msgid "&Delay between images:" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:85 +msgid "
The delay, in seconds, between images." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:87 +msgid "Start with current image" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:88 +msgid "" +"
If this option is enabled, slideshow will be started with currently " +"selected image." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:91 +msgid "Display in a loop" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:92 +msgid "
Run the slideshow in endless repetition." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:94 +msgid "Print image file name" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:95 +msgid "
Print the image file name at the bottom of the screen." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:97 +msgid "Print image creation date" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:98 +msgid "
Print the image creation time/date at the bottom of the screen." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:100 +msgid "Print camera aperture and focal length" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:101 +msgid "" +"
Print the camera aperture and focal length at the bottom of the screen." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:103 +msgid "Print camera exposure and sensitivity" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:104 +msgid "" +"
Print the camera exposure and sensitivity at the bottom of the screen." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:106 +msgid "Print camera make and model" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:107 +msgid "
Print the camera make and model at the bottom of the screen." +msgstr "" + +#: utilities/setup/setupslideshow.cpp:109 +msgid "Print image caption" +msgstr "" + +#: utilities/setup/setupslideshow.cpp:110 +msgid "
Print the image caption at the bottom of the screen." +msgstr "" + +#: utilities/setup/setuptooltip.cpp:109 +msgid "Show album items toolti&ps" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:110 +msgid "" +"
Set this option to display image information when the mouse hovers over " +"an album item." +msgstr "" + +#: utilities/setup/setuptooltip.cpp:147 +msgid "Show camera aperture and focal" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:171 +msgid "digiKam Information" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:173 +msgid "Show album name" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:174 +msgid "
Set this option to display the album name." +msgstr "" + +#: utilities/setup/setuptooltip.cpp:176 +msgid "Show image caption" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:177 +msgid "
Set this option to display the image captions." +msgstr "" + +#: utilities/setup/setuptooltip.cpp:179 +msgid "Show image tags" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:180 +msgid "
Set this option to display the image tags." +msgstr "" + +#: utilities/setup/setuptooltip.cpp:182 +msgid "Show image rating" +msgstr "" + +#: utilities/setup/setuptooltip.cpp:183 +msgid "
Set this option to display the image rating."
+msgstr ""
+
+#: utilities/slideshow/slideshow.cpp:433
+msgid ""
+"Cannot display image\n"
+"\"%1\""
+msgstr ""
+
+#: utilities/slideshow/slideshow.cpp:451
+msgid "SlideShow Completed."
+msgstr ""
+
+#: utilities/slideshow/slideshow.cpp:452
+msgid "Click To Exit..."
+msgstr ""
+
+#: digikam/digikamui.rc:7
+#, no-c-format
+msgid "&Album"
+msgstr ""
+
+#: digikam/digikamui.rc:25
+#, no-c-format
+msgid "T&ag"
+msgstr ""
+
+#: digikam/digikamui.rc:33
+#, no-c-format
+msgid "&Image"
+msgstr ""
+
+#: digikam/digikamui.rc:47 showfoto/showfotoui.rc:27
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:24
+#, no-c-format
+msgid "&Edit"
+msgstr ""
+
+#: digikam/digikamui.rc:69
+#, no-c-format
+msgid "&Tools"
+msgstr ""
+
+#: digikam/digikamui.rc:84
+#, no-c-format
+msgid "&Batch"
+msgstr ""
+
+#: digikam/digikamui.rc:88
+#, no-c-format
+msgid "&Import"
+msgstr ""
+
+#: digikam/digikamui.rc:97
+#, no-c-format
+msgid "&Export"
+msgstr ""
+
+#: digikam/digikamui.rc:101 showfoto/showfotoui.rc:86
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:80
+#: utilities/lighttable/lighttablewindowui.rc:45
+#, no-c-format
+msgid "&Settings"
+msgstr ""
+
+#: digikam/digikamui.rc:113 showfoto/showfotoui.rc:78
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:72
+#: utilities/lighttable/lighttablewindowui.rc:37
+#, no-c-format
+msgid "&Help"
+msgstr ""
+
+#: digikam/digikamui.rc:127
+#: imageplugins/adjustcurves/digikamimageplugin_adjustcurves_ui.rc:13
+#: imageplugins/adjustlevels/digikamimageplugin_adjustlevels_ui.rc:13
+#: imageplugins/antivignetting/digikamimageplugin_antivignetting_ui.rc:13
+#: imageplugins/blurfx/digikamimageplugin_blurfx_ui.rc:13
+#: imageplugins/border/digikamimageplugin_border_ui.rc:13
+#: imageplugins/channelmixer/digikamimageplugin_channelmixer_ui.rc:13
+#: imageplugins/charcoal/digikamimageplugin_charcoal_ui.rc:13
+#: imageplugins/colorfx/digikamimageplugin_colorfx_ui.rc:13
+#: imageplugins/coreplugin/digikamimageplugin_core_ui.rc:51
+#: imageplugins/distortionfx/digikamimageplugin_distortionfx_ui.rc:13
+#: imageplugins/emboss/digikamimageplugin_emboss_ui.rc:13
+#: imageplugins/filmgrain/digikamimageplugin_filmgrain_ui.rc:13
+#: imageplugins/freerotation/digikamimageplugin_freerotation_ui.rc:13
+#: imageplugins/hotpixels/digikamimageplugin_hotpixels_ui.rc:13
+#: imageplugins/infrared/digikamimageplugin_infrared_ui.rc:12
+#: imageplugins/inpainting/digikamimageplugin_inpainting_ui.rc:13
+#: imageplugins/inserttext/digikamimageplugin_inserttext_ui.rc:13
+#: imageplugins/lensdistortion/digikamimageplugin_lensdistortion_ui.rc:13
+#: imageplugins/noisereduction/digikamimageplugin_noisereduction_ui.rc:13
+#: imageplugins/oilpaint/digikamimageplugin_oilpaint_ui.rc:13
+#: imageplugins/perspective/digikamimageplugin_perspective_ui.rc:13
+#: imageplugins/raindrop/digikamimageplugin_raindrop_ui.rc:13
+#: imageplugins/restoration/digikamimageplugin_restoration_ui.rc:13
+#: imageplugins/sheartool/digikamimageplugin_sheartool_ui.rc:13
+#: imageplugins/superimpose/digikamimageplugin_superimpose_ui.rc:13
+#: imageplugins/texture/digikamimageplugin_texture_ui.rc:13
+#: imageplugins/whitebalance/digikamimageplugin_whitebalance_ui.rc:13
+#: showfoto/showfotoui.rc:100
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:94
+#: utilities/lighttable/lighttablewindowui.rc:59
+#, no-c-format
+msgid "Main Toolbar"
+msgstr ""
+
+#: imageplugins/adjustcurves/digikamimageplugin_adjustcurves_ui.rc:6
+#: imageplugins/adjustlevels/digikamimageplugin_adjustlevels_ui.rc:6
+#: imageplugins/channelmixer/digikamimageplugin_channelmixer_ui.rc:6
+#: imageplugins/colorfx/digikamimageplugin_colorfx_ui.rc:6
+#: imageplugins/coreplugin/digikamimageplugin_core_ui.rc:6
+#: imageplugins/whitebalance/digikamimageplugin_whitebalance_ui.rc:6
+#: showfoto/showfotoui.rc:54
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:49
+#, no-c-format
+msgid "&Color"
+msgstr ""
+
+#: imageplugins/antivignetting/digikamimageplugin_antivignetting_ui.rc:6
+#: imageplugins/coreplugin/digikamimageplugin_core_ui.rc:26
+#: imageplugins/hotpixels/digikamimageplugin_hotpixels_ui.rc:6
+#: imageplugins/inpainting/digikamimageplugin_inpainting_ui.rc:6
+#: imageplugins/lensdistortion/digikamimageplugin_lensdistortion_ui.rc:6
+#: imageplugins/noisereduction/digikamimageplugin_noisereduction_ui.rc:6
+#: imageplugins/restoration/digikamimageplugin_restoration_ui.rc:6
+#: showfoto/showfotoui.rc:57
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:52
+#, no-c-format
+msgid "Enh&ance"
+msgstr ""
+
+#: imageplugins/blurfx/digikamimageplugin_blurfx_ui.rc:6
+#: imageplugins/charcoal/digikamimageplugin_charcoal_ui.rc:6
+#: imageplugins/coreplugin/digikamimageplugin_core_ui.rc:37
+#: imageplugins/distortionfx/digikamimageplugin_distortionfx_ui.rc:6
+#: imageplugins/emboss/digikamimageplugin_emboss_ui.rc:6
+#: imageplugins/filmgrain/digikamimageplugin_filmgrain_ui.rc:6
+#: imageplugins/infrared/digikamimageplugin_infrared_ui.rc:5
+#: imageplugins/oilpaint/digikamimageplugin_oilpaint_ui.rc:6
+#: imageplugins/raindrop/digikamimageplugin_raindrop_ui.rc:6
+#: showfoto/showfotoui.rc:75
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:69
+#, no-c-format
+msgid "F&ilters"
+msgstr ""
+
+#: imageplugins/border/digikamimageplugin_border_ui.rc:6
+#: imageplugins/inserttext/digikamimageplugin_inserttext_ui.rc:6
+#: imageplugins/superimpose/digikamimageplugin_superimpose_ui.rc:6
+#: imageplugins/texture/digikamimageplugin_texture_ui.rc:6
+#: showfoto/showfotoui.rc:72
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:66
+#, no-c-format
+msgid "&Decorate"
+msgstr ""
+
+#: imageplugins/coreplugin/digikamimageplugin_core_ui.rc:18
+#, no-c-format
+msgid "&Depth"
+msgstr ""
+
+#: imageplugins/coreplugin/digikamimageplugin_core_ui.rc:33
+#: imageplugins/freerotation/digikamimageplugin_freerotation_ui.rc:6
+#: imageplugins/perspective/digikamimageplugin_perspective_ui.rc:6
+#: imageplugins/sheartool/digikamimageplugin_sheartool_ui.rc:6
+#: showfoto/showfotoui.rc:61
+#: utilities/imageeditor/editor/digikamimagewindowui.rc:55
+#, no-c-format
+msgid "Tra&nsform"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:16
+#, no-c-format
+msgid "DeleteDialogBase"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:60
+#, no-c-format
+msgid "Icon Placeholder, not in GUI"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:76
+#, no-c-format
+msgid "Deletion method placeholder, never shown to user."
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:79
+#, no-c-format
+msgid "WordBreak|AlignCenter"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:94
+#, no-c-format
+msgid "List of files that are about to be deleted."
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:97
+#, no-c-format
+msgid "This is the list of items that are about to be deleted."
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:105
+#, no-c-format
+msgid "Placeholder for number of files, not in GUI"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:108
+#, no-c-format
+msgid "AlignVCenter|AlignRight"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:134
+#, no-c-format
+msgid "&Delete files instead of moving them to the trash"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:137
+#, no-c-format
+msgid ""
+"If checked, files will be permanently removed instead of being placed in the "
+"Trash Bin"
+msgstr ""
+
+#: libs/dialogs/deletedialogbase.ui:140
+#, no-c-format
+msgid ""
+" If this box is checked, files will be permanently removed "
+"instead of being placed in the Trash Bin. Use this option with caution: most filesystems "
+"are unable to undelete deleted files reliably. If this box is checked, this dialog will no longer be shown, and "
+"files will be directly moved to the Trash Bin \n"
+"\n"
+"
\n"
+"\n"
+" \n"
+"\n"
+"\n"
+" \n"
+"\n"
+"... that digiKam supports Drag'n'Drop? So you can easily move images "
+"from Konqueror to digiKam or from digiKam to K3b simply by using "
+"\"Drag'n'Drop\".\n"
+" \n"
+"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can use nested albums in digiKam.\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can view the Exif, MakerNotes, and IPTC " +"photo information by using the Metadata sidebar tab?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that each photo has a context menu that can be reached by clicking on it " +"with the right mouse button?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that albums in digiKam are folders in your Album Library? So you can " +"easily import your photos by simply copying them to your Album Library.\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can customize your digiKam toolbars using Settings -> Configure " +"Toolbars...?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can reach other users through the digiKam-users mailing list? " +"Subscribe to it at this url.\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that digiKam has multiple plugins with extra features like HTML " +"export, Archive to CD, Slideshow,... and that you are " +"welcome to write your own plugins? You can find more information at this url.\n" +" | \n" +"
\n" +"
\n" +" | \n" +"... that you have direct access to the KDE Gamma Configuration using Tools -" +"> Gamma Adjustment?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can print images using the Print Wizard? You can start it using " +"Album -> Export -> Print Wizard.\n" +" | \n" +"
\n" +"
\n" +" | \n" +"\n" +"... that you can use the PNG file format instead of TIFF for " +"good compression without losing image quality?\n" +" | \n" +"
\n" +"
\n" +" | \n" +"\n" +"... that most of the settings in a dialog box have What's this? " +"information available, which can be reached via the right mouse button?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that because the PNG file format uses a lossless compression algorithm, " +"you can use the max compression level with this file format?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can print the current image opened in the digiKam image " +"editor?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you can edit the comments of the current image opened in the " +"digiKam image editor using Comments and Tags sidebar tab?\n" +" | \n" +"
\n" +"
\n" +"\n" +" | \n" +"\n" +"... that you could use <Page Down> and <Page Up> on your " +"keyboard to switch between photos in the image editor?\n" +" | \n" +"