Remove the tq in front of these incorrectly TQt4-converted methods/data members:

tqrepaint[...]
tqinvalidate[...]
tqparent[...]
tqmask[...]
tqlayout[...]
tqalignment[...]


git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/gwenview@1240522 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

11 files changed, 65 insertions, 65 deletions

diff --git a/src/gvcore/bcgdialogbase.ui b/src/gvcore/bcgdialogbase.ui
index b3d77b5..9f6960c 100644
--- a/src/gvcore/bcgdialogbase.ui
+++ b/src/gvcore/bcgdialogbase.ui
@@ -175,5 +175,5 @@
     <tabstop>mGSlider</tabstop>
     <tabstop>mGSpinBox</tabstop>
 </tabstops>
-<tqlayoutdefaults spacing="6" margin="11"/>
+<layoutdefaults spacing="6" margin="11"/>
 </UI>
diff --git a/src/gvcore/deletedialogbase.ui b/src/gvcore/deletedialogbase.ui
index c81d2eb..4725920 100644
--- a/src/gvcore/deletedialogbase.ui
+++ b/src/gvcore/deletedialogbase.ui
@@ -104,7 +104,7 @@
 </widget>
 <customwidgets>
 </customwidgets>
-<tqlayoutdefaults spacing="6" margin="11"/>
+<layoutdefaults spacing="6" margin="11"/>
 <includehints>
     <includehint>klistbox.h</includehint>
 </includehints>
diff --git a/src/gvcore/externaltooldialogbase.ui b/src/gvcore/externaltooldialogbase.ui
index bcd4939..00d2954 100644
--- a/src/gvcore/externaltooldialogbase.ui
+++ b/src/gvcore/externaltooldialogbase.ui
@@ -358,7 +358,7 @@ You can use keywords in the Command field:
     <tabstop>radioButton1</tabstop>
     <tabstop>mMimeTypeListView</tabstop>
 </tabstops>
-<tqlayoutdefaults spacing="6" margin="11"/>
+<layoutdefaults spacing="6" margin="11"/>
 <includehints>
     <includehint>klistview.h</includehint>
     <includehint>kurllabel.h</includehint>
diff --git a/src/gvcore/fileoperation.cpp b/src/gvcore/fileoperation.cpp
index 8213fcb..da5b8d8 100644
--- a/src/gvcore/fileoperation.cpp
+++ b/src/gvcore/fileoperation.cpp
@@ -56,8 +56,8 @@ void moveTo(const KURL::List& srcURL,TQWidget* tqparent,TQObject* receiver,const
 	(*op)();
 }
 
-void makeDir(const KURL& tqparentURL, TQWidget* tqparent, TQObject* receiver, const char* slot) {
-    FileOpObject* op=new FileOpMakeDirObject(tqparentURL, tqparent);
+void makeDir(const KURL& parentURL, TQWidget* tqparent, TQObject* receiver, const char* slot) {
+    FileOpObject* op=new FileOpMakeDirObject(parentURL, tqparent);
 	if (receiver && slot) TQObject::connect(op,TQT_SIGNAL(success()),receiver,slot);
 	(*op)();
 }
diff --git a/src/gvcore/fileoperation.h b/src/gvcore/fileoperation.h
index 163682b..fb79d7b 100644
--- a/src/gvcore/fileoperation.h
+++ b/src/gvcore/fileoperation.h
@@ -42,7 +42,7 @@ namespace FileOperation {
 LIBGWENVIEW_EXPORT void copyTo(const KURL::List&,TQWidget* tqparent=0L);
 LIBGWENVIEW_EXPORT void moveTo(const KURL::List&,TQWidget* tqparent,TQObject* receiver=0L,const char* slot=0L);
 LIBGWENVIEW_EXPORT void linkTo(const KURL::List& srcURL,TQWidget* tqparent);
-LIBGWENVIEW_EXPORT void makeDir(const KURL& tqparentURL, TQWidget* tqparent, TQObject* receiver=0L, const char* slot=0L);
+LIBGWENVIEW_EXPORT void makeDir(const KURL& parentURL, TQWidget* tqparent, TQObject* receiver=0L, const char* slot=0L);
 LIBGWENVIEW_EXPORT void del(const KURL::List&,TQWidget* tqparent,TQObject* receiver=0L,const char* slot=0L);
 LIBGWENVIEW_EXPORT void trash(const KURL::List&,TQWidget* tqparent,TQObject* receiver=0L,const char* slot=0L);
 LIBGWENVIEW_EXPORT void realDelete(const KURL::List&,TQWidget* tqparent,TQObject* receiver=0L,const char* slot=0L);
diff --git a/src/gvcore/filterbar.ui b/src/gvcore/filterbar.ui
index 43dc2de..b407ce1 100644
--- a/src/gvcore/filterbar.ui
+++ b/src/gvcore/filterbar.ui
@@ -251,5 +251,5 @@ equal to this date</string>
     <tabstop>mToDateEdit</tabstop>
     <tabstop>mFilterButton</tabstop>
 </tabstops>
-<tqlayoutdefaults spacing="6" margin="11"/>
+<layoutdefaults spacing="6" margin="11"/>
 </UI>
diff --git a/src/gvcore/imageviewcontroller.cpp b/src/gvcore/imageviewcontroller.cpp
index 1ec4218..992a961 100644
--- a/src/gvcore/imageviewcontroller.cpp
+++ b/src/gvcore/imageviewcontroller.cpp
@@ -424,9 +424,9 @@ bool ImageViewController::eventFilter(TQObject* object, TQEvent* event) {
 	// Check we must filter this object. This is an application filter, so we
 	// have to check we are not dealing with another object.
 	bool isAChildOfStack=false;
-	TQObject* tqparentObject;
-	for (tqparentObject=object->tqparent(); tqparentObject; tqparentObject=tqparentObject->tqparent()) {
-		if (TQT_BASE_OBJECT(tqparentObject)==TQT_BASE_OBJECT(d->mStack)) {
+	TQObject* parentObject;
+	for (parentObject=object->tqparent(); parentObject; parentObject=parentObject->tqparent()) {
+		if (TQT_BASE_OBJECT(parentObject)==TQT_BASE_OBJECT(d->mStack)) {
 			isAChildOfStack=true;
 			break;
 		}
diff --git a/src/gvcore/printdialogpagebase.ui b/src/gvcore/printdialogpagebase.ui
index 976cf12..6d92eda 100644
--- a/src/gvcore/printdialogpagebase.ui
+++ b/src/gvcore/printdialogpagebase.ui
@@ -398,7 +398,7 @@
         <slot>setEnabled(bool)</slot>
     </connection>
 </connections>
-<tqlayoutdefaults spacing="6" margin="11"/>
+<layoutdefaults spacing="6" margin="11"/>
 <includehints>
     <includehint>kcombobox.h</includehint>
     <includehint>knuminput.h</includehint>
diff --git a/src/gvcore/qxcfi.cpp b/src/gvcore/qxcfi.cpp
index f6da18f..8c690ba 100644
--- a/src/gvcore/qxcfi.cpp
+++ b/src/gvcore/qxcfi.cpp
@@ -653,8 +653,8 @@ void XCFImageFormat::composeTiles ( XCFImage& xcf_image )
   if ( layer.type == GRAYA_GIMAGE || layer.type == INDEXEDA_GIMAGE )
     layer.alpha_tiles.resize( layer.nrows );
 
-  if ( layer.tqmask_offset != 0 )
-    layer.tqmask_tiles.resize( layer.nrows );
+  if ( layer.mask_offset != 0 )
+    layer.mask_tiles.resize( layer.nrows );
 
   for ( uint j = 0; j < layer.nrows; j++ ) {
     layer.image_tiles[j].resize( layer.ncols );
@@ -662,8 +662,8 @@ void XCFImageFormat::composeTiles ( XCFImage& xcf_image )
     if ( layer.type == GRAYA_GIMAGE || layer.type == INDEXEDA_GIMAGE )
       layer.alpha_tiles[j].resize( layer.ncols );
 
-    if ( layer.tqmask_offset != 0 )
-      layer.tqmask_tiles[j].resize( layer.ncols );
+    if ( layer.mask_offset != 0 )
+      layer.mask_tiles[j].resize( layer.ncols );
   }
 
   for ( uint j = 0; j < layer.nrows; j++ ) {
@@ -717,9 +717,9 @@ void XCFImageFormat::composeTiles ( XCFImage& xcf_image )
 	setGrayPalette( layer.alpha_tiles[j][i] );
       }
 
-      if ( layer.tqmask_offset != 0 ) {
-	layer.tqmask_tiles[j][i] = TQImage( tile_width, tile_height, 8, 256 );
-	setGrayPalette( layer.tqmask_tiles[j][i] );
+      if ( layer.mask_offset != 0 ) {
+	layer.mask_tiles[j][i] = TQImage( tile_width, tile_height, 8, 256 );
+	setGrayPalette( layer.mask_tiles[j][i] );
       }
     }
   }
@@ -874,7 +874,7 @@ bool XCFImageFormat::loadLayer ( SafeDataStream& xcf_io, XCFImage& xcf_image )
 
   // If there are any more layers, merge them into the final TQImage.
 
-  xcf_io >> layer.hierarchy_offset >> layer.tqmask_offset;
+  xcf_io >> layer.hierarchy_offset >> layer.mask_offset;
 
   if ( xcf_io.failed() ) {
     qDebug( "XCF: read failure on layer image offsets" );
@@ -896,8 +896,8 @@ bool XCFImageFormat::loadLayer ( SafeDataStream& xcf_io, XCFImage& xcf_image )
 
   if ( !loadHierarchy( xcf_io, layer ) ) return false;
 
-  if ( layer.tqmask_offset != 0 ) {
-    xcf_io.device()->at( layer.tqmask_offset );
+  if ( layer.mask_offset != 0 ) {
+    xcf_io.device()->at( layer.mask_offset );
 
     if ( !loadMask( xcf_io, layer ) ) return false;
   }
@@ -1018,24 +1018,24 @@ bool XCFImageFormat::loadChannelProperties ( SafeDataStream& xcf_io, Layer& laye
       return true;
 
     case PROP_OPACITY:
-      property >> layer.tqmask_channel.opacity;
+      property >> layer.mask_channel.opacity;
       break;
 
     case PROP_VISIBLE:
-      property >> layer.tqmask_channel.visible;
+      property >> layer.mask_channel.visible;
       break;
 
     case PROP_SHOW_MASKED:
-      property >> layer.tqmask_channel.show_tqmasked;
+      property >> layer.mask_channel.show_masked;
       break;
 
     case PROP_COLOR:
-      property >> layer.tqmask_channel.red >> layer.tqmask_channel.green
-	       >> layer.tqmask_channel.blue;
+      property >> layer.mask_channel.red >> layer.mask_channel.green
+	       >> layer.mask_channel.blue;
       break;
       
     case PROP_TATTOO:
-      property >> layer.tqmask_channel.tattoo;
+      property >> layer.mask_channel.tattoo;
       break;
 
     default:
@@ -1377,7 +1377,7 @@ void XCFImageFormat::assignImageBytes ( Layer& layer, uint i, uint j )
     for ( int l = 0; l < layer.image_tiles[j][i].height(); l++ ) {
       for ( int k = 0; k < layer.image_tiles[j][i].width(); k++ ) {
 
-	// The "if" here should not be necessary, but aptqparently there
+	// The "if" here should not be necessary, but apparently there
 	// are some cases where the image can contain larger indices
 	// than there are colors in the palette. (A bug in The GIMP?)
 
@@ -1404,7 +1404,7 @@ void XCFImageFormat::assignMaskBytes ( Layer& layer, uint i, uint j )
 
   for ( int l = 0; l < layer.image_tiles[j][i].height(); l++ ) {
     for ( int k = 0; k < layer.image_tiles[j][i].width(); k++ ) {
-      layer.tqmask_tiles[j][i].setPixel( k, l, tile[0] );
+      layer.mask_tiles[j][i].setPixel( k, l, tile[0] );
       tile += sizeof(TQRgb);
     }
   }
@@ -1555,7 +1555,7 @@ void XCFImageFormat::copyLayerToImage ( XCFImage& xcf_image )
 
       // This seems the best place to apply the dissolve because it
       // depends on the global position of each tile's
-      // pixels. Aptqparently it's the only mode which can apply to a
+      // pixels. Apparently it's the only mode which can apply to a
       // single layer.
 
       if ( layer.mode == DISSOLVE_MODE ) {
@@ -1607,9 +1607,9 @@ void XCFImageFormat::copyRGBToRGB ( Layer& layer, uint i, uint j, int k, int l,
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   image.setPixel( m, n, tqRgba( src, src_a ) );
 }
@@ -1680,9 +1680,9 @@ void XCFImageFormat::copyGrayAToRGB ( Layer& layer, uint i, uint j, int k, int l
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   image.setPixel( m, n, tqRgba( src, src_a ) );
 }
@@ -1727,10 +1727,10 @@ void XCFImageFormat::copyIndexedAToIndexed ( Layer& layer,uint i,uint j,int k,in
   src_a = INT_MULT( src_a, layer.opacity );
 
   if ( layer.apply_tqmask == 1 &&
-       layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
+       layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
     src_a = INT_MULT( src_a,
-		      layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+		      layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   if ( src_a > 127 )
     src++;
@@ -1764,9 +1764,9 @@ void XCFImageFormat::copyIndexedAToRGB ( Layer& layer, uint i, uint j, int k, in
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   // This is what appears in the GIMP window
 
@@ -1822,7 +1822,7 @@ void XCFImageFormat::mergeLayerIntoImage ( XCFImage& xcf_image )
 
       // This seems the best place to apply the dissolve because it
       // depends on the global position of each tile's
-      // pixels. Aptqparently it's the only mode which can apply to a
+      // pixels. Apparently it's the only mode which can apply to a
       // single layer.
 
       if ( layer.mode == DISSOLVE_MODE ) {
@@ -2021,9 +2021,9 @@ void XCFImageFormat::mergeRGBToRGB ( Layer& layer, uint i, uint j, int k, int l,
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   uchar new_r, new_g, new_b, new_a;
 
@@ -2123,9 +2123,9 @@ void XCFImageFormat::mergeGrayAToGray ( Layer& layer, uint i, uint j, int k, int
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   uchar new_a = OPAQUE_OPACITY;
 
@@ -2234,9 +2234,9 @@ void XCFImageFormat::mergeGrayAToRGB ( Layer& layer, uint i, uint j, int k, int
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   uchar new_a = dst_a + INT_MULT( OPAQUE_OPACITY - dst_a, src_a );
 
@@ -2291,10 +2291,10 @@ void XCFImageFormat::mergeIndexedAToIndexed ( Layer& layer,uint i,uint j,int k,i
   src_a = INT_MULT( src_a, layer.opacity );
 
   if ( layer.apply_tqmask == 1 &&
-       layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
+       layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
     src_a = INT_MULT( src_a,
-		      layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+		      layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   if ( src_a > 127 ) {
     src++;
@@ -2326,9 +2326,9 @@ void XCFImageFormat::mergeIndexedAToRGB ( Layer& layer, uint i, uint j, int k, i
 
   // Apply the tqmask (if any)
 
-  if ( layer.apply_tqmask == 1 && layer.tqmask_tiles.size() > j &&
-       layer.tqmask_tiles[j].size() > i )
-    src_a = INT_MULT( src_a, layer.tqmask_tiles[j][i].pixelIndex( k, l ) );
+  if ( layer.apply_tqmask == 1 && layer.mask_tiles.size() > j &&
+       layer.mask_tiles[j].size() > i )
+    src_a = INT_MULT( src_a, layer.mask_tiles[j][i].pixelIndex( k, l ) );
 
   // This is what appears in the GIMP window
 
@@ -2349,7 +2349,7 @@ void XCFImageFormat::mergeIndexedAToRGB ( Layer& layer, uint i, uint j, int k, i
  */
 void XCFImageFormat::dissolveRGBPixels ( TQImage& image, int x, int y )
 {
-  // The aptqparently spurious rand() calls are to wind the random
+  // The apparently spurious rand() calls are to wind the random
   // numbers up to the same point for each tile.
 
   for ( int l = 0; l < image.height(); l++ ) {
@@ -2380,7 +2380,7 @@ void XCFImageFormat::dissolveRGBPixels ( TQImage& image, int x, int y )
  */
 void XCFImageFormat::dissolveAlphaPixels ( TQImage& image, int x, int y )
 {
-  // The aptqparently spurious rand() calls are to wind the random
+  // The apparently spurious rand() calls are to wind the random
   // numbers up to the same point for each tile.
 
   for ( int l = 0; l < image.height(); l++ ) {
diff --git a/src/gvcore/qxcfi.h b/src/gvcore/qxcfi.h
index e98f226..be0c3d6 100644
--- a/src/gvcore/qxcfi.h
+++ b/src/gvcore/qxcfi.h
@@ -130,7 +130,7 @@ class XCFImageFormat : public TQImageFormatPlugin {
     TQ_INT32 type;		//!< Type of the layer (GimpImageType)
     char* name;			//!< Name of the layer
     TQ_UINT32 hierarchy_offset;	//!< File position of Tile hierarchy
-    TQ_UINT32 tqmask_offset;	//!< File position of tqmask image
+    TQ_UINT32 mask_offset;	//!< File position of tqmask image
 
     uint nrows;			//!< Number of rows of tiles (y direction)
     uint ncols;			//!< Number of columns of tiles (x direction)
@@ -139,16 +139,16 @@ class XCFImageFormat : public TQImageFormatPlugin {
     //! For Grayscale and Indexed images, the alpha channel is stored
     //! separately (in this data structure, anyway).
     Tiles alpha_tiles;
-    Tiles tqmask_tiles;		//!< The layer tqmask (optional)
+    Tiles mask_tiles;		//!< The layer tqmask (optional)
 
     //! Additional information about a layer tqmask.
     struct {
       TQ_UINT32 opacity;
       TQ_UINT32 visible;
-      TQ_UINT32 show_tqmasked;
+      TQ_UINT32 show_masked;
       uchar red, green, blue;
       TQ_UINT32 tattoo;
-    } tqmask_channel;
+    } mask_channel;
 
     bool active;		//!< Is this layer the active layer?
     TQ_UINT32 opacity;		//!< The opacity of the layer
diff --git a/src/gvcore/thumbnaildetailsdialogbase.ui b/src/gvcore/thumbnaildetailsdialogbase.ui
index 1ed73b7..1dd6646 100644
--- a/src/gvcore/thumbnaildetailsdialogbase.ui
+++ b/src/gvcore/thumbnaildetailsdialogbase.ui
@@ -113,5 +113,5 @@
         </widget>
     </vbox>
 </widget>
-<tqlayoutdefaults spacing="6" margin="11"/>
+<layoutdefaults spacing="6" margin="11"/>
 </UI>