dnl ======================================================= dnl FILE: ./admin/configure.in.min dnl ======================================================= dnl This file is part of the KDE libraries/packages dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) dnl This file is free software; you can redistribute it and/or dnl modify it under the terms of the GNU Library General Public dnl License as published by the Free Software Foundation; either dnl version 2 of the License, or (at your option) any later version. dnl This library is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl Library General Public License for more details. dnl You should have received a copy of the GNU Library General Public License dnl along with this library; see the file COPYING.LIB. If not, write to dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, dnl Boston, MA 02110-1301, USA. # Original Author was Kalle@kde.org # I lifted it in some mater. (Stephan Kulow) # I used much code from Janos Farkas dnl Process this file with autoconf to produce a configure script. AC_INIT(acinclude.m4) dnl a source file from your sub dir dnl This is so we can use kde-common AC_CONFIG_AUX_DIR(admin) dnl This ksh/zsh feature conflicts with `cd blah ; pwd` unset CDPATH dnl Checking host/target/build systems, for make, install etc. AC_CANONICAL_SYSTEM dnl Perform program name transformation AC_ARG_PROGRAM dnl Automake doc recommends to do this only here. (Janos) AM_INIT_AUTOMAKE(gwenview-1.4.2, "3.5.7") dnl searches for some needed programs AM_MAINTAINER_MODE KDE_SET_PREFIX dnl generate the config header AM_CONFIG_HEADER(config.h) dnl at the distribution this done dnl Checks for programs. AC_CHECK_COMPILERS AC_ENABLE_SHARED(yes) AC_ENABLE_STATIC(no) KDE_PROG_LIBTOOL dnl for NLS support. Call them in this order! dnl WITH_NLS is for the po files AM_KDE_WITH_NLS KDE_USE_QT(3.2) AC_PATH_KDE dnl ======================================================= dnl FILE: configure.in.in dnl ======================================================= #MIN_CONFIG(3.2) KDE_ENABLE_HIDDEN_VISIBILITY KDE_CHECK_LIB(m, lround, [ AC_DEFINE(HAVE_LROUND, 1, [Define if you have lround]) ]) # # KIPI # AC_ARG_WITH(kipi, AC_HELP_STRING([--without-kipi], [build Gwenview without KIPI, 'KDE Image Plugin Interface']), [want_kipi=$withval], [want_kipi=yes] ) if test "$want_kipi" = "yes"; then AC_MSG_NOTICE(checking if KIPI is installed) KDE_CHECK_HEADER(libkipi/interface.h, have_kipi=yes, have_kipi=no) if test "$have_kipi" = "yes"; then AC_DEFINE(GV_HAVE_KIPI, 1, [If we have libkipi installed]) GV_LIB_KIPI="-lkipi" AC_SUBST(GV_LIB_KIPI) else AC_MSG_WARN([KIPI is not installed. Gwenview will be build without KIPI support.]) fi fi # # Imlib/Mosfet scaling # AM_PROG_AS # MMX test duped from kdelibs/kdefx - it should be probably moved to admin/ dnl ----------------------------------------------------- dnl IA32 checks dnl ----------------------------------------------------- gv_asm_defs= case $host_cpu in i*86 ) AC_MSG_CHECKING(for assembler support for IA32 extensions) dnl MMX check AC_TRY_COMPILE(, [ __asm__("pxor %mm0, %mm0") ], [ echo $ECHO_N "MMX yes$ECHO_C" AC_DEFINE_UNQUOTED(HAVE_X86_MMX, 1, [Define to 1 if the assembler supports MMX instructions.]) gv_asm_defs="$gv_asm_defs -DHAVE_X86_MMX" ], [ echo $ECHO_N "MMX no$ECHO_C" ]) dnl SSE check AC_TRY_COMPILE(,[ __asm__("xorps %xmm0, %xmm0") ], [ echo $ECHO_N ", SSE yes$ECHO_C" AC_DEFINE_UNQUOTED(HAVE_X86_SSE, 1, [Define to 1 if the assembler supports SSE instructions.]) gv_asm_defs="$gv_asm_defs -DHAVE_X86_SSE" ], [ echo $ECHO_N ", SSE no$ECHO_C" ]) dnl SSE2 check AC_TRY_COMPILE(, [ __asm__("xorpd %xmm0, %xmm0") ], [ echo $ECHO_N ", SSE2 yes$ECHO_C" AC_DEFINE_UNQUOTED(HAVE_X86_SSE2, 1, [Define to 1 if the assembler supports SSE2 instructions.]) gv_asm_defs="$gv_asm_defs -DHAVE_X86_SSE2" ], [ echo $ECHO_N ", SSE2 no$ECHO_C" ]) dnl 3DNOW check AC_TRY_COMPILE(, [ __asm__("femms") ], [ echo $ECHO_N ", 3DNOW yes$ECHO_C" AC_DEFINE_UNQUOTED(HAVE_X86_3DNOW, 1, [Define to 1 if the assembler supports 3DNOW instructions.]) gv_asm_defs="$gv_asm_defs -DHAVE_X86_3DNOW" ], [ echo $ECHO_N ", 3DNOW no$ECHO_C" ]) echo ;; powerpc ) AC_MSG_CHECKING(for assembler support for AltiVec instructions) dnl AltiVec check AC_TRY_COMPILE(, [ __asm__("mtspr 256, %0\n\t" "vand %%v0, %%v0, %%v0" : : "r"(-1) ) ], [ echo $ECHO_N " yes$ECHO_C" AC_DEFINE_UNQUOTED(HAVE_PPC_ALTIVEC, 1, [Define to 1 if the assembler supports AltiVec instructions.]) gv_asm_defs="$gv_asm_defs -DHAVE_PPC_ALTIVEC" ], [ echo $ECHO_N ", AltiVec no$ECHO_C" ]) echo ;; esac GV_ASM_DEFS="$gv_asm_defs" AC_SUBST(GV_ASM_DEFS) # # libmng check (for gvmngformattype.*) # LIBMNG= KDE_CHECK_HEADER(libmng.h, [ KDE_CHECK_LIB(mng, mng_initialize, [ AC_DEFINE_UNQUOTED(HAVE_LIBMNG, 1, [Define if you have libmng]) LIBMNG="-lmng $LIBZ -lm" ], [], $LIBZ -lm) ]) AC_SUBST(LIBMNG) if test -z "$LIBMNG"; then AC_WARN([Can't find libmng.h, Gwenview won't be compiled with MNG support]) fi # # libxcursor # KDE_CHECK_HEADERS(X11/Xcursor/Xcursor.h, [KDE_CHECK_LIB(Xcursor, XcursorXcFileLoadImages, [ GV_LIB_XCURSOR=-lXcursor AC_DEFINE_UNQUOTED(GV_HAVE_XCURSOR, 1, [Define to 1 if you have Xcursor]) ], [ GV_LIB_XCURSOR= ], [ $X_PRE_LIBS -lX11 $X_EXTRA_LIBS ])], [ GV_LIB_XCURSOR= ], [#include <X11/Xlib.h>]) AC_SUBST(GV_LIB_XCURSOR) if test -z "$GV_LIB_XCURSOR"; then AC_WARN([Can't find Xcursor.h, Gwenview won't be compiled with X cursor support]) fi # # libexiv2 # KDE_CHECK_HEADERS(exiv2/image.hpp, have_exiv2=yes, have_exiv2=no) if test "$have_exiv2" = "yes"; then LIB_EXIV2="-lexiv2" AC_SUBST(LIB_EXIV2) else AC_MSG_ERROR([You are missing libexiv2, which is required to compile Gwenview]) DO_NOT_COMPILE="$DO_NOT_COMPILE gwenview" fi KDE_CREATE_SUBDIRSLIST AM_CONDITIONAL(doc_SUBDIR_included, test "x$doc_SUBDIR_included" = xyes) AM_CONDITIONAL(src_SUBDIR_included, test "x$src_SUBDIR_included" = xyes) AC_CONFIG_FILES([ Makefile ]) AC_CONFIG_FILES([ doc/Makefile ]) AC_CONFIG_FILES([ src/Makefile ]) AC_CONFIG_FILES([ src/app/Makefile ]) AC_CONFIG_FILES([ src/desktopfiles/Makefile ]) AC_CONFIG_FILES([ src/doc/Makefile ]) AC_CONFIG_FILES([ src/gvcore/Makefile ]) AC_CONFIG_FILES([ src/gvdirpart/Makefile ]) AC_CONFIG_FILES([ src/gvimagepart/Makefile ]) AC_CONFIG_FILES([ src/imageutils/Makefile ]) AC_CONFIG_FILES([ src/pics/Makefile ]) AC_CONFIG_FILES([ src/pics/action/Makefile ]) AC_CONFIG_FILES([ src/pics/app/Makefile ]) AC_CONFIG_FILES([ src/pics/cursor/Makefile ]) AC_CONFIG_FILES([ src/pics/thumbnail/Makefile ]) AC_CONFIG_FILES([ src/tools/Makefile ]) AC_CONFIG_FILES([ src/tsthread/Makefile ]) AC_CONFIG_FILES([ src/updates/Makefile ]) AC_OUTPUT if test "$want_kipi" = "yes" ; then if test "$have_kipi" != "yes" ; then echo "" echo "KIPI is not installed. Gwenview will be build without KIPI support." echo "" fi else echo "" echo "KIPI support has been disabled. Gwenview will be build without KIPI support." echo "" fi dnl Put here things to be done at the very end - telling users dnl about additional packages to install. Better yet is giving dnl each project / subdr its own configure.in.bot. # Check if KDE_SET_PREFIX was called, and --prefix was passed to configure if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then # And if so, warn when they don't match if test "$kde_libs_prefix" != "$given_prefix"; then # And if kde doesn't know about the prefix yet echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null if test $? -ne 0; then echo "" echo "Warning: you chose to install this package in $given_prefix," echo "but KDE was found in $kde_libs_prefix." echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" echo "Then restart KDE." echo "" fi fi fi if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then echo "" echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" echo "was not included. Therefore, GCC symbol visibility support remains disabled." echo "" echo "For better performance, consider including the Qt visibility supporting patch" echo "located at:" echo "" echo "http://bugs.kde.org/show_bug.cgi?id=109386" echo "" echo "and recompile all of Qt and KDE. Note, this is entirely optional and" echo "everything will continue to work just fine without it." echo "" fi if test "$all_tests" = "bad"; then if test ! "$cache_file" = "/dev/null"; then echo "" echo "Please remove the file $cache_file after changing your setup" echo "so that configure will find the changes next time." echo "" fi else echo "" echo "Good - your configure finished. Start make now" echo "" fi