26 files changed, 39 insertions, 297 deletions
diff --git a/.gitmodules b/.gitmodules
index bdec8fc..69dd7b2 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -1,6 +1,3 @@
-[submodule "admin"]
-	path = admin
-	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin
 [submodule "cmake"]
 	path = cmake
 	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 21b1468..f1bf528 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -41,13 +41,13 @@ tde_setup_paths( )
 
 ##### optional stuff
 
-option( WITH_ALL_OPTIONS "Enable all optional support" OFF                                          )
+option( WITH_ALL_OPTIONS    "Enable all optional support" OFF )
 option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
 
 
 ##### user requested modules
 
-option( BUILD_ALL "Build all" ON                             )
+option( BUILD_ALL          "Build all" ON )
 option( BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL} )
 
 
diff --git a/ChangeLog b/ChangeLog
deleted file mode 100644
index 323fd37..0000000
--- a/ChangeLog
+++ /dev/null
@@ -1 +0,0 @@
-2012-05-17 - Initial Release
-\ No newline at end of file
diff --git a/INSTALL b/INSTALL
index 02a4a07..4d6e1c3 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,167 +1,24 @@
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+kcmldapcontroller relies on cmake to build.
 
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+Here are suggested default options:
 
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
+ -DSYSCONF_INSTALL_DIR="/etc" \
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
+ -DCMAKE_SKIP_RPATH="OFF" \
+ -DBUILD_ALL="ON" \
+ -DWITH_ALL_OPTIONS="ON"
 
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
 
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes a while.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Type `make install' to install the programs and any data files and
-     documentation.
-
-  4. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
+Requirements:
+=============
 
+- libtdeldap
+- OpenLDAP (server and libraries)
+- Heimdal
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index 8a2284f..0000000
--- a/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-SUBDIRS = $(TOPSUBDIRS)
-
-$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
-
-$(top_srcdir)/subdirs:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
-
-$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
-	@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files 
-
-package-messages:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages
-	$(MAKE) -C po merge
-
-EXTRA_DIST = admin COPYING configure.in.in
-
-dist-hook:
-	cd $(top_distdir) && perl admin/am_edit -padmin
-	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
diff --git a/Makefile.cvs b/Makefile.cvs
deleted file mode 100644
index 4c0afd1..0000000
--- a/Makefile.cvs
+++ /dev/null
@@ -1,10 +0,0 @@
-all: 
-	@echo "This Makefile is only for the CVS repository"
-	@echo "This will be deleted before making the distribution"
-	@echo ""
-	$(MAKE) -f admin/Makefile.common cvs
-
-dist:
-	$(MAKE) -f admin/Makefile.common dist
-
-.SILENT:
diff --git a/NEWS b/NEWS
deleted file mode 100644
index e69de29..0000000
--- a/NEWS
+++ /dev/null
diff --git a/README b/README
index e69de29..0620b4b 100644
--- a/README
+++ b/README
@@ -0,0 +1,21 @@
+
+
+ kcmldapcontroller - a Kerberos realm controller module for the Trinity
+ control center
+
+
+kcmldapcontroller is a Trinity control center module to configure a
+Kerberos Realm Controller.
+
+
+
+CONTRIBUTING
+=============
+
+If you wish to contribute kcmldapcontroller, you might do so:
+
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
+
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate
diff --git a/TODO b/TODO
deleted file mode 100644
index e69de29..0000000
--- a/TODO
+++ /dev/null
diff --git a/acl-updater/Makefile.am b/acl-updater/Makefile.am
deleted file mode 100644
index 6feca09..0000000
--- a/acl-updater/Makefile.am
+++ /dev/null
@@ -1 +0,0 @@
-SUBDIRS = plugin
diff --git a/acl-updater/plugin/Makefile.am b/acl-updater/plugin/Makefile.am
deleted file mode 100644
index febfacb..0000000
--- a/acl-updater/plugin/Makefile.am
+++ /dev/null
@@ -1,7 +0,0 @@
-INCLUDES = $(all_includes) $(KDE_INCLUDES)/tde -I$(top_srcdir)
-
-lib_LTLIBRARIES = slapi-acl-manager.la
-
-slapi_acl_manager_la_SOURCES = interface.c plugin.cpp plugin.h
-slapi_acl_manager_la_LIBADD = -ltqt-mt -ltdeldap $(SLAPI_LIBRARIES)
-slapi_acl_manager_la_LDFLAGS = -module -avoid-version $(all_libraries)
diff --git a/acl-updater/plugin/configure.in.in b/acl-updater/plugin/configure.in.in
deleted file mode 100644
index 9feb979..0000000
--- a/acl-updater/plugin/configure.in.in
+++ /dev/null
@@ -1,6 +0,0 @@
-
-# Check for slapi-plugin.h
-AC_CHECK_HEADERS(slapi-plugin.h)
-
-# Check for the slapi library
-AC_CHECK_LIB(slapi, slapi_pblock_get, AC_SUBST(SLAPI_LIBRARIES, "-lslapi"), [], [-shared -fPIC])
diff --git a/admin b/admin
deleted file mode 160000
-Subproject f9148018b2f8a11fd830712c1b508046cc34ff2
diff --git a/cert-updater/Makefile.am b/cert-updater/Makefile.am
deleted file mode 100644
index 7b9c261..0000000
--- a/cert-updater/Makefile.am
+++ /dev/null
@@ -1,10 +0,0 @@
-INCLUDES= $(all_includes) $(KDE_INCLUDES)/tde
-
-bin_PROGRAMS = primaryrccertupdater
-
-primaryrccertupdater_SOURCES = main.cpp
-
-primaryrccertupdater_METASOURCES = AUTO
-primaryrccertupdater_LDFLAGS = $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor -ltdeldap
-
-KDE_OPTIONS = nofinal
-\ No newline at end of file
diff --git a/configure.files b/configure.files
deleted file mode 100644
index 030bce8..0000000
--- a/configure.files
+++ /dev/null
@@ -1,2 +0,0 @@
-./admin/configure.in.min
-configure.in.in
diff --git a/configure.in.in b/configure.in.in
deleted file mode 100644
index 18b1486..0000000
--- a/configure.in.in
+++ /dev/null
@@ -1,6 +0,0 @@
-#MIN_CONFIG(3.2.0)
-
-AM_INIT_AUTOMAKE(autostart, 0.1)
-AC_C_BIGENDIAN
-AC_CHECK_KDEMAXPATHLEN
-
diff --git a/confskel/Makefile.am b/confskel/Makefile.am
deleted file mode 100644
index 42f25a9..0000000
--- a/confskel/Makefile.am
+++ /dev/null
@@ -1,19 +0,0 @@
-confskeldir = $(kde_datadir)/kcmldapcontroller/skel
-
-heimdalskeldir = $(confskeldir)/heimdal
-heimdalskel_DATA = heimdal/*
-
-ldapskeldir = $(confskeldir)/openldap
-ldapskel_DATA = openldap/skel.ldif
-
-ldapconfskeldir = $(ldapskeldir)/ldap
-ldapconfskel_DATA = openldap/ldap/*
-
-ldapldifskeldir = $(ldapskeldir)/ldif
-ldapldifskel_DATA = openldap/ldif/*
-
-saslskeldir = $(confskeldir)/sasl
-saslskel_DATA = sasl/*
-
-sslskeldir = $(confskeldir)/openssl
-sslskel_DATA = openssl/*
-\ No newline at end of file
diff --git a/doc/Makefile.am b/doc/Makefile.am
deleted file mode 100644
index faa0ae8..0000000
--- a/doc/Makefile.am
+++ /dev/null
@@ -1,6 +0,0 @@
-# the SUBDIRS is filled automatically by am_edit. If files are 
-# in this directory they are installed into the english dir
-
-KDE_LANG = en
-KDE_DOCS = autostart
-SUBDIRS = $(AUTODIRS)  
diff --git a/doc/en/Makefile.am b/doc/en/Makefile.am
deleted file mode 100644
index e7a9eb0..0000000
--- a/doc/en/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-KDE_DOCS = ldap
-KDE_LANG = en
diff --git a/pics/Makefile.am b/pics/Makefile.am
deleted file mode 100644
index b07be07..0000000
--- a/pics/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-kpersonalizer_pics_data_DATA = kcmldapcontroller_step1.png kcmldapcontroller_step4.png
-kpersonalizer_pics_datadir = $(datarootdir)/pixmaps
-
diff --git a/po/Makefile.am b/po/Makefile.am
deleted file mode 100644
index 898f985..0000000
--- a/po/Makefile.am
+++ /dev/null
@@ -1,2 +0,0 @@
-POFILES = AUTO
-# noinst_HEADERS = ldap.pot
diff --git a/src/Makefile.am b/src/Makefile.am
deleted file mode 100644
index e0e84a3..0000000
--- a/src/Makefile.am
+++ /dev/null
@@ -1,19 +0,0 @@
-INCLUDES    = $(all_includes) $(KDE_INCLUDES)/tde
-METASOURCES = AUTO
-SUBDIRS     = primaryrealmwizard secondaryrealmwizard
-
-# Install this plugin in the KDE modules directory
-kde_module_LTLIBRARIES = kcm_ldapcontroller.la
-
-kcm_ldapcontroller_la_SOURCES = ldapcontroller.cpp ldapcontrollerconfigbase.ui processingdialog.cpp sha1.cc multimasterreplicationconfigbase.ui multimasterreplicationconfigdlg.cpp
-kcm_ldapcontroller_la_LIBADD = primaryrealmwizard/libprimaryrealmwizard.la secondaryrealmwizard/libsecondaryrealmwizard.la $(LIB_TDEIO) $(LIB_TDEUI) -ltdeldap
-kcm_ldapcontroller_la_LDFLAGS = -avoid-version -module -no-undefined $(all_libraries)
-
-
-xdg_apps_DATA = ldapcontroller.desktop
-
-
-messages: rc.cpp
-	$(EXTRACTRC) `find -name \*.ui -o -name \*.rc` > rc.cpp
-	$(XGETTEXT) *.cpp -o $(podir)/kcmldapcontroller.pot
-
diff --git a/src/primaryrealmwizard/Makefile.am b/src/primaryrealmwizard/Makefile.am
deleted file mode 100644
index 8f61131..0000000
--- a/src/primaryrealmwizard/Makefile.am
+++ /dev/null
@@ -1,5 +0,0 @@
-INCLUDES    = $(all_includes) $(KDE_INCLUDES)/tde -I$(top_srcdir)/src
-METASOURCES = AUTO
-
-noinst_LTLIBRARIES = libprimaryrealmwizard.la
-libprimaryrealmwizard_la_SOURCES = primaryrealmwizard.cpp realmintropagedlg.ui certconfigpagedlg.ui certconfigpage.cpp realmintropage.cpp realmconfigpagedlg.ui realmconfigpage.cpp realmfinishpagedlg.ui realmfinishpage.cpp
-\ No newline at end of file
diff --git a/src/secondaryrealmwizard/Makefile.am b/src/secondaryrealmwizard/Makefile.am
deleted file mode 100644
index 883f260..0000000
--- a/src/secondaryrealmwizard/Makefile.am
+++ /dev/null
@@ -1,5 +0,0 @@
-INCLUDES    = $(all_includes) $(KDE_INCLUDES)/tde -I$(top_srcdir)/src
-METASOURCES = AUTO
-
-noinst_LTLIBRARIES = libsecondaryrealmwizard.la
-libsecondaryrealmwizard_la_SOURCES = secondaryrealmwizard.cpp realmintropagedlg.ui certconfigpagedlg.ui certconfigpage.cpp realmintropage.cpp realmconfigpagedlg.ui realmconfigpage.cpp realmfinishpagedlg.ui realmfinishpage.cpp
-\ No newline at end of file
diff --git a/stamp-h.in b/stamp-h.in
deleted file mode 100644
index e69de29..0000000
--- a/stamp-h.in
+++ /dev/null
diff --git a/subdirs b/subdirs
deleted file mode 100644
index 6bb976a..0000000
--- a/subdirs
+++ /dev/null
@@ -1,7 +0,0 @@
-acl-updater
-cert-updater
-confskel
-doc
-pics
-po
-src