From 0169018a94e42166016df4772e95f4a2c5e0bd61 Mon Sep 17 00:00:00 2001 From: Automated System Date: Thu, 13 Jun 2019 00:52:44 +0200 Subject: Merge translation files from master branch. --- translations/sv/messages/kile.po | 145 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 136 insertions(+), 9 deletions(-) (limited to 'translations/sv/messages/kile.po') diff --git a/translations/sv/messages/kile.po b/translations/sv/messages/kile.po index 1f4f742..8cffb81 100644 --- a/translations/sv/messages/kile.po +++ b/translations/sv/messages/kile.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: kile\n" -"POT-Creation-Date: 2019-01-13 19:08+0100\n" +"POT-Creation-Date: 2019-06-13 00:11+0200\n" "PO-Revision-Date: 2008-03-23 13:24+0100\n" "Last-Translator: Stefan Asserhäll \n" "Language-Team: Swedish \n" @@ -7765,7 +7765,6 @@ msgid "" "the DVI file. Stop spending so much time on finding the place in the source " "file: if you spotted a mistake while viewing the DVI, finding the correct " "location is just a mouse-click away!.

\n" -"\n" "

Read the manual to find " "out how to activate this feature.

\n" msgstr "" @@ -7818,10 +7817,8 @@ msgid "" "auto-completion and type in \\ref{, a list with all available " "labels will appear automatically (if auto-completion is not enabled, press " "Ctrl+Space).

\n" -"\n" "

Note that this feature is much more powerful if the current document " "belongs to a project.

\n" -"\n" "

You can configure auto-completion by going to Settings->Configure Kile-" ">Complete; there, you can select databases of LaTeX commands. You can " "even create your own lists of commands.

\n" @@ -7845,7 +7842,6 @@ msgid "" "

...that Kile can complete LaTeX commands for you? Type \\se " "and press Ctrl+Space, a list of all commands starting with \\se " "will appear.

\n" -"\n" "

You can configure auto-completion by going to Settings->Configure Kile-" ">Complete; there, you can select databases of LaTeX commands. You can " "even create your own lists of commands.

\n" @@ -7867,7 +7863,6 @@ msgid "" "of all environments starting with equ appears. Press Enter to " "select the first entry and a \\begin{equation}\\end{equation} " "pair is inserted in your document.

\n" -"\n" "

You can configure auto-completion by going to Settings->Configure Kile-" ">Complete; there, you can select databases of LaTeX commands. You can " "even create your own lists of commands.

\n" @@ -7900,7 +7895,6 @@ msgid "" "

...that the Quick Preview tool will compile and select a part of a " "document? This can be a selected text, the current environment " "or the current subdocument.

\n" -"\n" "

You can configure Quick preview by going to Settings->Configure Kile-" ">Preview. There, you can select one of the predefined configurations.\n" @@ -7916,7 +7910,6 @@ msgstr "" #, fuzzy msgid "" "

...that a new wizard will help to create tabulars and arrays?

\n" -"\n" "

A right click with the mouse will open a dialog or a popup menu, where a " "lot of attributes like alignment, colors, horizontal and " "vertical lines and more can be set. Also multicolumn cells are " @@ -7932,7 +7925,6 @@ msgstr "" #, fuzzy msgid "" "

...that Kile can show user defined help files?

\n" -"\n" "

Go to Settings->Configure Kile->Help and configure your help " "files, which are integrated into the help menu.

\n" msgstr "" @@ -7940,6 +7932,141 @@ msgstr "" "

Gå till Inställningar -> Anpassa Kile -> Hjälp och ställ in din " "hjälpfil, som integreras i hjälpmenyn.

\n" +#, fuzzy +#~ msgid "" +#~ "

...that Kile supports forward search? This enables you to switch back " +#~ "and forth between places in the source file and their corresponding " +#~ "locations in the DVI file. Stop spending so much time on finding the " +#~ "place in the source file: if you spotted a mistake while viewing the DVI, " +#~ "finding the correct location is just a mouse-click away!.

\n" +#~ "\n" +#~ "

Read the manual to " +#~ "find out how to activate this feature.

\n" +#~ msgstr "" +#~ "

... att Kile stöder sökning framåt? Den gör att du kan växla fram och " +#~ "tillbaka mellan platser i källfilen och motsvarande platser i DVI-filen. " +#~ "Sluta tillbringa så mycket tid med att hitta platsen i källfilen om du " +#~ "såg ett misstag när du tittade på DVI-filen. Att hitta rätt plats kräver " +#~ "bara ett musklick!

\n" +#~ "\n" +#~ "

Läs handboken för att " +#~ "få reda på hur funktionen aktiveras.

\n" + +#, fuzzy +#~ msgid "" +#~ "

...that inserting references and citations has never been easier? " +#~ "Enable auto-completion and type in \\ref{, a list with all " +#~ "available labels will appear automatically (if auto-completion is not " +#~ "enabled, press Ctrl+Space).

\n" +#~ "\n" +#~ "

Note that this feature is much more powerful if the current document " +#~ "belongs to a project.

\n" +#~ "\n" +#~ "

You can configure auto-completion by going to Settings->Configure " +#~ "Kile->Complete; there, you can select databases of LaTeX commands. " +#~ "You can even create your own lists of commands.

\n" +#~ msgstr "" +#~ "

... att det aldrig har varit enklare att infoga referenser och " +#~ "hänvisningar? Aktivera automatisk komplettering och skriv in " +#~ "\\ref{. En lista med alla tillgängliga hänvisningar visas " +#~ "automatiskt (om automatisk komplettering inte är aktiverad, tryck på Ctrl" +#~ "+Mellanslag).

\n" +#~ "\n" +#~ "

Observera att funktionen är mycket kraftfullare om det aktuella " +#~ "dokumentet hör till ett projekt.

\n" +#~ "\n" +#~ "

Du kan ställa in automatiskt komplettering genom att gå till " +#~ "Inställningar -> Anpassa Kile -> Komplettera. Där kan du välja " +#~ "databaser med Latex-kommandon. Du kan till och med skapa din egen lista " +#~ "över kommandon.

\n" + +#, fuzzy +#~ msgid "" +#~ "

...that Kile can complete LaTeX commands for you? Type \\se and press Ctrl+Space, a list of all commands starting with " +#~ "\\se will appear.

\n" +#~ "\n" +#~ "

You can configure auto-completion by going to Settings->Configure " +#~ "Kile->Complete; there, you can select databases of LaTeX commands. " +#~ "You can even create your own lists of commands.

\n" +#~ msgstr "" +#~ "

... att Kile kan komplettera Latex-kommandon åt dig? Skriv \\se och tryck Ctrl+Mellanslag, så visas en lista med alla kommandon som " +#~ "börjar med \\se.

\n" +#~ "\n" +#~ "

Du kan ställa in automatiskt komplettering genom att gå till " +#~ "Inställningar -> Anpassa Kile -> Komplettera. Där kan du välja " +#~ "databaser med Latex-kommandon. Du kan till och med skapa din egen lista " +#~ "över kommandon.

\n" + +#, fuzzy +#~ msgid "" +#~ "

...starting a new environment is very easy using the auto-complete " +#~ "feature. For example, type equ and press Alt+Space and a " +#~ "list of all environments starting with equ appears. Press " +#~ "Enter to select the first entry and a " +#~ "\\begin{equation}\\end{equation} pair is inserted in your document." +#~ "

\n" +#~ "\n" +#~ "

You can configure auto-completion by going to Settings->Configure " +#~ "Kile->Complete; there, you can select databases of LaTeX commands. " +#~ "You can even create your own lists of commands.

\n" +#~ msgstr "" +#~ "

... att det är mycket enkelt att starta en ny omgivning med funktionen " +#~ "för automatisk komplettering. Skriv till exempel equ och " +#~ "tryck på Alt+Mellanslag, så visas en lista över alla omgivningar som " +#~ "börjar med equ. Tryck på returtangenten för att välja den " +#~ "första posten så infogas paret \\begin{equation}\\end{equation} i dokumentet.

\n" +#~ "\n" +#~ "

Du kan ställa in automatiskt komplettering genom att gå till " +#~ "Inställningar -> Anpassa Kile -> Komplettera. Där kan du välja " +#~ "databaser med Latex-kommandon. Du kan till och med skapa din egen lista " +#~ "över kommandon.

\n" + +#, fuzzy +#~ msgid "" +#~ "

...that the Quick Preview tool will compile and select a part of a " +#~ "document? This can be a selected text, the current environment or the current subdocument.

\n" +#~ "\n" +#~ "

You can configure Quick preview by going to Settings->Configure " +#~ "Kile->Preview. There, you can select one of the predefined " +#~ "configurations.

\n" +#~ msgstr "" +#~ "

... att verktyget för snabbgranskning kompilerar och väljer en del av " +#~ "ett dokument? Det kan vara en markerad text, aktuell omgivning eller aktuellt underdokument.

\n" +#~ "

Du kan ställa in snabbgranskning genom att gå till

Inställningar -> " +#~ "Anpassa Kile -> Förhandsgranskning. Där kan du välja en av de " +#~ "fördefinierade inställningarna.

\n" + +#, fuzzy +#~ msgid "" +#~ "

...that a new wizard will help to create tabulars and arrays?

\n" +#~ "\n" +#~ "

A right click with the mouse will open a dialog or a popup menu, where " +#~ "a lot of attributes like alignment, colors, horizontal " +#~ "and vertical lines and more can be set. Also multicolumn cells " +#~ "are supported.

\n" +#~ msgstr "" +#~ "

... att en ny guide hjälper dig att skapa tabeller och fält?

\n" +#~ "

Ett högerklick med musen visar en dialogruta eller sammanhangsberoende " +#~ "meny, där en mängd egenskaper som justering, färger, " +#~ "horisontella och vertikala linjer med mera kan ställas in. " +#~ "Dessutom stöds flerkolumnceller.

\n" + +#, fuzzy +#~ msgid "" +#~ "

...that Kile can show user defined help files?

\n" +#~ "\n" +#~ "

Go to Settings->Configure Kile->Help and configure your help " +#~ "files, which are integrated into the help menu.

\n" +#~ msgstr "" +#~ "

... att Kile kan visa användardefinierade hjälpfiler?

\n" +#~ "

Gå till Inställningar -> Anpassa Kile -> Hjälp och ställ in din " +#~ "hjälpfil, som integreras i hjälpmenyn.

\n" + #, fuzzy #~ msgid "Files" #~ msgstr "Fil:" -- cgit v1.2.1