<?xml version="1.0" ?>
<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [
  <!ENTITY kile "<application>Kile</application>">
  <!ENTITY latex "L<superscript>A</superscript>T<subscript>E</subscript>X">
  <!ENTITY pdflatex "PDFL<superscript>A</superscript>T<subscript>E</subscript>X">
  <!ENTITY tex "T<subscript>E</subscript>X">
  <!ENTITY tetex "<application>teT<subscript>E</subscript>X</application>">
  <!ENTITY texlive "<application>TeX Live</application>">
  <!ENTITY bibtex "BibT<subscript>E</subscript>X">
  <!ENTITY makeindex "makeindex">
  <!ENTITY kbibtex "KBibT<subscript>E</subscript>X">
  <!ENTITY kbib "KBib">
  <!ENTITY asymptote "Asymptote">
  <!ENTITY imagemagick "<application>ImageMagick</application>">
  <!ENTITY kde "<acronym>KDE</acronym>">
  <!ENTITY kdvi "<application>KDVI</application>">
  <!ENTITY dvipng "<application>dvipng</application>">
  <!ENTITY kghostview "<application>KGhostView</application>">
  <!ENTITY kpdf "<application>KPDF</application>">
  <!ENTITY postscript "<application>PostScript</application>">
  <!ENTITY makeidx "<application>makeidx</application>">
  <!ENTITY kate "<application>Kate</application>">
  <!ENTITY cjk "<abbrev>CJK</abbrev>">
  <!ENTITY ucs "<abbrev>ucs</abbrev>">
  <!ENTITY url "<acronym>URL</acronym>">
  <!ENTITY kappname "&kile;">
  <!ENTITY package "kdeextragear-2">
  <!ENTITY % addindex "IGNORE">
  <!ENTITY % English "INCLUDE">
]>

<book lang="&language;">

<bookinfo>
<title>The &kile; Handbook</title>

<authorgroup>
	<author><firstname>Jonathan</firstname><surname>Pechta</surname></author>
	<author><firstname>Federico</firstname><surname>Zenith</surname>
	<affiliation><address><email>zenith@chemeng.ntnu.no</email></address></affiliation></author>
	<author><firstname>Holger</firstname><surname>Danielsson</surname>
	<affiliation><address><email>holger.danielsson@versanet.de</email></address></affiliation></author>
	<author><firstname>Thomas</firstname><surname>Braun</surname></author>
	<author><firstname>Michel</firstname><surname>Ludwig</surname>
	<affiliation><address><email>michel.ludwig@kdemail.net</email></address></affiliation></author>
</authorgroup>

<!-- TRANS:ROLES_OF_TRANSLATORS -->

<copyright>
<year>2003</year>
<holder>Jonathan Pechta</holder>
</copyright>

<copyright>
<year>2003</year><year>2005</year><year>2006</year>
<holder>Federico Zenith</holder>
</copyright>

<copyright>
<year>2005</year><year>2006</year>
<holder>Holger Danielsson</holder>
</copyright>

<copyright>
<year>2007</year>
<holder>Thomas Braun</holder>
</copyright>

<copyright>
<year>2007</year>
<holder>Michel Ludwig</holder>
</copyright>

<date>November 19, 2007</date>
<releaseinfo>2.0</releaseinfo>

<legalnotice>
&FDLNotice;
</legalnotice>

<abstract>
<para>
&kile; is a &tex; and &latex; source editor and shell.
</para>
</abstract>

<keywordset>
<keyword>KDE</keyword>
<keyword>kdenonbeta</keyword>
<keyword>Kile</keyword>
<keyword>LaTeX</keyword>
<keyword>TeX</keyword>
</keywordset>

</bookinfo>

<chapter id="preface">

<title>Preface</title>

	<sect1 id="preface_sect">

		<title>Requirements</title>
			
		<para>To Run &kile;, you will be required to have the following components 
		installed on your system:</para>

		<itemizedlist>
			<listitem><para>Trinity Desktop environment (&tde;):
			&tde; is a popular open-source desktop environment.</para></listitem>
			<listitem><para><ulink url="http://www.trolltech.com/products/qt/">Qt</ulink>: Qt is a C++
			 GUI and network library needed to compile &kile;.</para></listitem>
			<listitem><para><ulink url="http://www.ctan.org/">&latex;</ulink>: high-quality document
			typesetting program. Most likely you want the &texlive; (or on older systems the &tetex;) package, if you are on a
			Unix-like system.</para></listitem>
		</itemizedlist>

		<para>Most of these items might be included in your Linux distribution; please refer to your
		distribution documentation, or refer to your installation CD or DVD, for adding these
		packages to your computer.</para>

		<para>The &kile; project includes several binary packages of &kile; for different distributions that can be easily
		installed and run without having to compile; check out the <ulink url="http://kile.sourceforge.net/">&kile;
		homepage</ulink>.</para>

	</sect1>

	<sect1 id="preface_audience">

		<title>Intended Audience</title>

		<para>This manual is intended for any individual, regardless of her or his experience with
		&latex;, &kde;, &kile; or Linux.</para>

		<para>Advanced users are not likely to read this manual, but all suggestions on
		documentation will be considered. If you would like to contribute to this project or the
		documentation, please consult the <ulink url="http://kile.sourceforge.net/">&kile; web page</ulink>.</para>

		<para>Need answers about &kile;? Are you stuck with your compile? Want to see a new
		feature? The preferred way to ask technical questions or start a discussion is to
		use our mailing list: <email>kile-devel@lists.sourceforge.net</email>.</para>

	</sect1>

</chapter>

<chapter id="introduction">

	<title>Introduction</title>

	<sect1 id="intro_about">

		<title>Basic facts</title>

		<sect2>

			<title>About &kile;</title>

			<para>&kile; is an integrated &latex; environment for the &kde; desktop. &kile; gives you the
			ability to use all the functionalities of &latex; in a graphical interface, giving you easy,
			immediate, and customized access to all programs for &latex; codecompletion, compiling, postprocessing,
			debugging, conversion and viewing tools; you also get very handy wizards, a &latex;
			reference and a powerful project management.</para>

		</sect2>

		<sect2>

			<title>What is &latex;</title>

			<para>&latex; is a text-processing system derived from &tex;, a program developed originally in
			1977 by Donald Knuth to help him layout his work professionally, obtaining a work similar 
			to a typesetter's; the typesetter is the professional that styles a document's look according to 
			specifications for the type of document.
			&latex; was created by Leslie Lamport to give authors an automatic typesetter, especially when 
			it came to the expensive and painstaking typesetting of mathematical formulas and expressions,
			that <emphasis>by no chance</emphasis> are enclosed in dollar signs in &latex;.
			Today, word-processing programs let any user be the typesetter; but what you often want
			is a document that looks good, not one that you spent hours on to make it look good.
			&latex; takes that burden, and lets you think of the document, not of the layout. And yes,
			it <emphasis>will</emphasis> look good!</para>

		</sect2>

		<sect2>

			<title>How do you pronounce it? Why that strange typesetting?</title>

			<para>There is a funny traditions of &tex;-related packages to have the strangest pronunciation
			and typesetting possible. &tex; was supposed to be brought in from the Greek <emphasis>τεχ</emphasis>,
			in Latin letters <emphasis>tech</emphasis>. There are a lot of explanations why, but most likely it is because
			&tex; was originally conceived for technical reports, and indeed its foremost ability was the correct and
			easy typesetting of mathematical formulae, then an extremely expensive, time-consuming and
			frustrating business.</para>
			<para>The pronunciation is supposed to be as follows: <emphasis>T</emphasis> as you would expect,
			<emphasis>E</emphasis> as in <emphasis>get</emphasis>, and <emphasis>X</emphasis> as in the
			German i<emphasis>ch</emphasis>. If you do not know what <emphasis>ch</emphasis> sounds like,
			it is more or less as an hissing cat; the IPA symbol is /ç/. Many people report the different pronunciation
			of <emphasis>ach</emphasis> (IPA symbol /x/), but I have personally asked some Greeks, and can
			confirm the first version. You should be aware that a lot of people mispronounce /teks/ or /tek/.</para>
			<para>Last, in &latex; the first L<superscript>A</superscript> is pronounced as
			<emphasis>lay</emphasis>: the idea is that, while raw &tex; is difficult, even a <emphasis>lay</emphasis>man
			can use &latex; macros. A less inspiring, but more realistic explanation is that it stems from the surname of 
			Leslie Lamport, the creator of &latex;. Now you know!</para>

		</sect2>

	</sect1>

	<sect1 id="intro_latexbasics">

		<title>&latex; 101</title>

		<para>The &latex; typesetting system is similar to other markup languages as XML, used for
		many types of documents (including the one you are reading), or HTML, used for web
		pages. The general idea is about having specially wrapped keywords, called <emphasis>
		tags</emphasis>, that tell a program (a word processor, a web browser, or the &latex;
		compiler) how to present text. &kile; offers you a good number of such tags in the
		menu <guimenu>LaTeX</guimenu> in the menu bar.</para>

		<para>While we will try to give you a good idea of what &latex; is, this is not The Definitive
		Book on &latex;. If you want to learn &latex; well, you may want to loan a book in your
		library. The writer has had a good experience with A Guide to &latex; by H. Kopka
		and P. W. Daly, and still keeps it on the shelf.</para>

		<para>As other markup languages, &latex; contains a <emphasis>preamble</emphasis>, which
		sets global commands, such as paper size, page numbering, dimensions of the text on the page,
		and a <emphasis>body</emphasis>, that contains the document text; the preamble contains
		at least the <userinput>\documentclass</userinput> command, and precedes the body, that 
		starts with the command <userinput>\begin{document}</userinput>, and is quite predictably 
		concluded by the command <userinput>\end{document}</userinput>.</para>

	</sect1>

	<sect1 id="intro_mainfeat">

		<title>&kile;'s Main Features</title>

		<sect2 id="intro_docwizard">

			<title>QuickStart Wizard</title>

			<para>The QuickStart wizard built into &kile; is a useful feature to quickly start creating documents
			in &kile;. Choosing the wizard from the menubar gives you several choices
			for the creation of your document.
			You can also specify some options related to the document right away.</para>

			<para>Class options:</para>

			<itemizedlist>
				<listitem><para><guilabel>Document Class</guilabel>: choose the type of document you want to create:
				 article, book, letter, report, scrartcl, scrreprt, scrbook, prosper, beamer or other
				 custom-defined.</para></listitem>
				<listitem><para><guilabel>Typeface Size</guilabel>: tell &kile; what point size (pt) 
				you want to use.</para></listitem>
				<listitem><para><guilabel>Paper Size</guilabel>: choose the size or style of sheets.</para></listitem>
				<listitem><para><guilabel>Encoding</guilabel>: In general it is a good idea to use your systems standard
						encoding. Modern systems now move more and more to UTF-8 as the standard encoding.
						If you can, use utf8x (which is indeed the correct spelling for &latex; documents).
					</para></listitem>
				<listitem><para><guilabel>Other options</guilabel>: this allows you to set further options such as printing, 
				draft, and others.</para></listitem>
			</itemizedlist>
			
			<para>Packages</para>
			<para>This lists some of the most common additional packages used in &latex;. Select the checkbox to include it.</para>

			<para>Document Properties</para>
			<itemizedlist>
				<listitem><para><guilabel>Author</guilabel>: put your name here.</para></listitem>
				<listitem><para><guilabel>Title</guilabel>: add the document title here.</para></listitem>
				<listitem><para><guilabel>Date</guilabel>: specify the date.</para></listitem>
			</itemizedlist>

		</sect2>

		<sect2 id="intro_templates">

			<title>Predefined Templates</title>

			<para>The predefined templates in &kile; are:</para>

			<itemizedlist>
				<listitem><para>Empty document: real freaks start from scratch!</para></listitem>
				<listitem><para>Article: sets the article format, for a document short enough not to
				be broken down to chapters.</para></listitem>
				<listitem><para>Report: sets the report format, for a middle-sized document, with for
				example page numbering on the page's outer edge.</para></listitem>
				<listitem><para>Book: sets the book format, a full-fledged flavor, so powerful that
				it is used to write many university textbooks.</para></listitem>
				<listitem><para>Letter: sets the letter format, that can automatically do those nasty
				indentations that nobody really remembers.</para></listitem>
				<listitem><para>Beamer,HA-Prosper: create nice presentations in PDF with a superior look and all 
						&latex; power.</para></listitem>
				<listitem><para>Scrartcl,Scrbook,Scrreprt,Scrlttr2: the KOMA-Script document classes, 
						especially adapted to german typography. Use them whenever you write german
						texts.</para></listitem>
			</itemizedlist>
			
			<para>New users need not to worry, this list is just a brief description of features,
			and more attention will be paid to complete these tasks in detail later in 
			<xref linkend="quickstart"/>.</para>

		</sect2>

		<sect2 id="intro_highlight">

			<title>Syntax Highlighting</title>

			<para>&kile; is similar to programs that deal with source code and editing, and will
			automatically highlight commands, options and items that are used (and abused).
			&kile; makes it possible to spot easily problem areas: for example, if you see major
			areas of text turned green, it is likely that you forgot closing a math environment somewhere;
			you would have noticed anyway by how crappy the output file would have looked, but
			highlighting really saves you time and frustration.</para>

		</sect2>

		<sect2 id="intro_autocoml">

			<title>Auto-Completion of Environments</title>

			<para>The auto-completion of environments means that, when you begin a new environment by typing
			<userinput>\begin{environment}</userinput>, &kile; will automatically insert a matching
			<userinput>\end{environment}</userinput> command, with a line in between them
			for your text. You can of course deactivate it if you want in 
			<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
			<guimenuitem>LaTeX</guimenuitem><guilabel>Environments</guilabel></menuchoice>.</para>

		</sect2>

		<sect2 id="intro_jump">

			<title>Jump to Structure Element</title>

			<para>All documents are normally structured in a hierarchy of some type.
			&latex; allows you to break up documents into the following hierarchy
			(part being highest in the hierarchy, and subparagraph being lowest):</para>

			<itemizedlist>
				<listitem><para>\part</para></listitem>
				<listitem><para>\chapter</para></listitem>
				<listitem><para>\section</para></listitem>
				<listitem><para>\subsection</para></listitem>
				<listitem><para>\subsubsection</para></listitem>
				<listitem><para>\paragraph</para></listitem>
				<listitem><para>\subparagraph</para></listitem>
			</itemizedlist>

			<para>When viewing a document in the <guilabel>Structure</guilabel> view, you can jump 
			between elements by clicking on the element you would like to view.</para>

		</sect2>

		<sect2 id="intro_inverse">

			<title>Inverse Search</title>

			<para>When creating your own &latex; files, inverse search can be very helpful. Once you
			have created a DVI file (DeVice Independent File), you can click the middle-
			mouse button in the DVI viewer and &kile; will jump to the corresponding line in the
			&latex; source code.</para>

			<para>A DVI is a type of file containing a
			description of a formatted document, along with other
			information including character font, and is besides PDF the usual output of
			&tex; or &latex;. A number of utilities exist to view, convert and print DVI files on
			various systems and devices.</para>

		</sect2>

		<sect2 id="intro_forward">

			<title>Forward Search</title>

			<para>When using inverse search, the selection of items in the DVI file is associated with
			the editor, so when you click on the DVI file, the main window jumps to the
			corresponding section of &latex; code in the editor. Forward search is the exact
			opposite of this. Forward search will allow you to click on a specific section of text
			in the &latex; code, and jump to the associated position in the DVI viewer window.</para>

		</sect2>

	</sect1>

	<sect1 id="intro_toolbar">

		<title>The Toolbar</title>

		<itemizedlist>
			<listitem><para><guibutton>New</guibutton>: begin a new document.</para></listitem>
			<listitem><para><guibutton>Open</guibutton>: open a new document.</para></listitem>
			<listitem><para><guibutton>Close</guibutton>: close your document.</para></listitem>
			<listitem><para><guibutton>Define document as master</guibutton>: this is used when working with multiple files.
			Having a master document will let you work more easily with other <literal role="extension">.tex</literal> files included 
			in your document. If you are using projects, you can also set in  <menuchoice><guimenu>Project-></guimenu><guisubmenu>Project
			Options</guisubmenu></menuchoice> a project-wide master document.</para></listitem>
			<listitem><para><guibutton>Quickbuild</guibutton>: compiles your &latex; source code and displays the results
			automatically, unless you have code errors.</para></listitem>
			<listitem><para><guibutton>Watch file mode</guibutton>: this mode will "watch" the DVI file for changes, and
			will not launch a new session of &kdvi; after <guibutton>Quickbuild</guibutton>.</para></listitem>
			<listitem><para><guibutton>View logfile</guibutton>: views the <literal role="extension">.log</literal> file,
					so you can spot errors.</para></listitem>
			<listitem><para><guibutton>Previous error</guibutton>: jumps backward through the 
					<literal role="extension">.log</literal> file 
					and highlights errors in source.</para></listitem>
			<listitem><para><guibutton>Next error</guibutton>: jumps forward through
					<literal role="extension">.log</literal> file and 
			highlights errors in source.</para></listitem>
			<listitem><para><guibutton>Stop</guibutton>: halts current tool.</para></listitem>
			<listitem><para><guibutton>LaTeX</guibutton>: runs &latex; on the active document.</para></listitem>
			<listitem><para><guibutton>View DVI</guibutton>: launches DVI viewer.</para></listitem>
			<listitem><para><guibutton>DVI to PS</guibutton>: converts a DVI to a &postscript; (PS).</para></listitem>
			<listitem><para><guibutton>View PS</guibutton>: launches &postscript; (PS) viewer.</para></listitem>
			<listitem><para><guibutton>PDFLaTeX</guibutton>: runs &pdflatex; on the active document.</para></listitem>
			<listitem><para><guibutton>View PDF</guibutton>: launches the PDF viewer.</para></listitem>
			<listitem><para><guibutton>DVI to PDF</guibutton>: converts a DVI to a PDF.</para></listitem>
			<listitem><para><guibutton>PS to PDF</guibutton>: converts a PS to a PDF.</para></listitem>
			<listitem><para><guibutton>View HTML</guibutton>: views HTML created.</para></listitem>
			<listitem><para><guibutton>Kdvi Forward Search</guibutton>: jump to page that corresponds to the current line in the
			editor.</para></listitem>
		</itemizedlist>

		<para>If you look at the <guilabel>Edit</guilabel> toolbar, you will notice three large 
		drop-down menus. The drop-down menus were designed for you to be able to quickly add
		certain common features into your document. The first drop-down box
		is used for quickly dividing your document by parts, chapter, sections and so on; the
		available commands to add segments to your &latex; source code are:</para>

		<itemizedlist>
			<listitem><para><guilabel>part</guilabel>: highest level of sectioning for a document.</para></listitem>
			<listitem><para><guilabel>chapter</guilabel>: starts a new chapter.</para></listitem>
			<listitem><para><guilabel>section</guilabel>: create a new section.</para></listitem>
			<listitem><para><guilabel>subsection</guilabel>: create a new subsection.</para></listitem>
			<listitem><para><guilabel>subsubsection</guilabel>: a secondary section between subsection and
			paragraph.</para></listitem>
			<listitem><para><guilabel>paragraph</guilabel>: create a new paragraph.</para></listitem>
			<listitem><para><guilabel>subparagraph</guilabel>: create a new subparagraph.</para></listitem>
		</itemizedlist>

		<para>The drop-down box named <guilabel>label</guilabel> is used to insert items to your document such as
		indexes, footnotes, and references; the available commands are:</para>

		<itemizedlist>
			<listitem><para><guilabel>label</guilabel>: a command that produces a label for a chapter, 
			a figure or another element.</para></listitem>
			<listitem><para><guilabel>index</guilabel>: creates an entry for the index.</para></listitem>
			<listitem><para><guilabel>footnote</guilabel>: creates a footnote in your document.</para></listitem>
			<listitem><para><guilabel>ref</guilabel>: used to refer to a predefined label, which
			you can choose from a drop-down list.</para></listitem>
			<listitem><para><guilabel>pageref</guilabel>: just like <guilabel>ref</guilabel>, but refers to 
			a page instead of a structure element.</para></listitem>
			<listitem><para><guilabel>cite</guilabel>: create a reference with data from a bibliography.</para></listitem>
			<listitem><para><guilabel>cite from ViewBib</guilabel>: ask the ViewBib tool for all selected references and insert them.
			Currently this is only avaible with <ulink url="http://user.digisurf.com.au/~thachly/kbib/">&kbib;</ulink> as ViewBib tool.</para></listitem>
		</itemizedlist>

		<screenshot>
			<screeninfo>The <guilabel>Label</guilabel> drop-down menu</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_ref_choose.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>The <guilabel>Label</guilabel> drop-down menu</phrase>
			</textobject>
			<caption><para>The <guilabel>Label</guilabel> drop-down menu</para></caption>
			</mediaobject>
		</screenshot>

		<screenshot>
			<screeninfo>Selecting the label for a reference</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_ref_select.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Selecting the label for a reference</phrase>
			</textobject>
			<caption><para>Selecting the label for a reference</para></caption>
			</mediaobject>
		</screenshot>

		<para>When using <guilabel>cite</guilabel>, you are presented with a drop-down 
		list of bibitems, but if you are using &bibtex; this will only work if the file 
		belongs to a Project. For editing &bibtex; files the usage of specialised editors is recommened.
		The author has made good experience with &kbibtex; and &kbib;. Of course you can also write the &bibtex; files by hand inside &kile;.</para>

		<para>The last drop-down box labeled <guilabel>tiny</guilabel> is used to set the size of the text. You can
		set the size of the main text, of footnotes, and so on. The available commands are:</para>

		<itemizedlist>
			<listitem><para><guilabel>tiny</guilabel>: smallest.</para></listitem>
			<listitem><para><guilabel>scriptsize</guilabel>: very small.</para></listitem>
			<listitem><para><guilabel>footnotesize</guilabel>: smaller.</para></listitem>
			<listitem><para><guilabel>small</guilabel>: small.</para></listitem>
			<listitem><para><guilabel>normalsize</guilabel>: normal.</para></listitem>
			<listitem><para><guilabel>large</guilabel>: large.</para></listitem>
			<listitem><para><guilabel>Large</guilabel>: larger.</para></listitem>
			<listitem><para><guilabel>LARGE</guilabel>: even larger.</para></listitem>
			<listitem><para><guilabel>huge</guilabel>: still larger.</para></listitem>
			<listitem><para><guilabel>Huge</guilabel>: largest.</para></listitem>
		</itemizedlist>

	</sect1>

</chapter>
<chapter id="quickstart">

	<title>Quickstart</title>

	<sect1 id="quick_begin">

		<title>Writing a &latex; Document with &kile; for Beginners</title>

		<para>Users of &kile; have two choices when starting a new document: they can use the 
		<guimenu>Wizard</guimenu> to begin a new document, select the type of document they
		would like to create and options such as font size, paper size, and so on; otherwise, 
		they can write the code by hand.</para>

		<screen><userinput>
		\documentclass[12pt]{article}
		\begin{document}
		Here is a bunch of text coded in \LaTeX.
		\end{document}</userinput></screen>

		<para>Every document in &latex; begins with the command <userinput>
		\documentclass[optional argument]{class}</userinput>, where class specifies the document type.</para>

		<para>Typing in the code example above from the text box gives you the following output:</para>

		<screenshot>
			<screeninfo>Compiled text in DVI output</screeninfo>
			<mediaobject>
				<imageobject>
					<imagedata fileref="latex_example.png" format="PNG" />
				</imageobject>
				<textobject>
					<phrase>Compiled text in DVI output</phrase>
				</textobject>
				<caption><para>Compiled text in DVI output</para></caption>
			</mediaobject>
		</screenshot>

		<para>The brackets that come after the command <userinput>\documentclass</userinput>
		contain the options for the command. The option <userinput>[12pt]</userinput> sets the size
		of the font for your article; if you do not set the font size in the beginning, you can set 
		it later in the text.</para>

		<para>Once you have typed in the code example from the box above, you will need to
		compile your &latex; source code. The easiest way for you to compile &latex; is to
		use the <guimenu>Build</guimenu> menu, or using the <guilabel>Quickbuild</guilabel> button.</para>

		<para><keycombo>&Alt;<keycap>2</keycap></keycombo>
		is the keyboard shortcut to compile your source code.</para>

		<para>You have to save your source code before you can compile; &kile; will do this automatically for you.</para>

		<para>If your document did not compile, check the log for errors. When using the <guilabel>Quickbuild</guilabel>
		key, the &kdvi; viewer should be launched automatically; if it does not, look at the log.</para>

	</sect1>

	<sect1 id="quick_env">
		<title>Environments</title>

		<para>An environment is a segment of text that is managed differently
		than the rest of the document. For example, you create a report with font size 12, 
		but you need to change your font size for a few sentences. The commands 
		<userinput>\begin{environment}</userinput>, <userinput>\huge</userinput> and 
		<userinput>\end{environment}</userinput> will let you temporarily alter the text inside 
		the environment commands to be size huge.</para>

		<para>Changes are only effective from <userinput>\begin{environment}</userinput> to
		<userinput>\end{environment}</userinput>. There are no limits as how many changes
		you can make inside an environment.</para>

		<para>There are many features you can add to your document that will make it more
		readable and user-friendly. You can add features such as specific fonts, bold, italics,
		underline etc. to your document, and these commands will end with either an
		<userinput>\end</userinput> command, or at the end of your environment.</para>

		<itemizedlist>
			<listitem><para><userinput>\begin{emph}</userinput>: this command makes 
			text italicized, and is valid until the code comes across a <userinput>\end{emph}</userinput>,
			<userinput>\end{emph}</userinput> or another environment. To italicize one word in a sentence, you
			can use the syntax: this is <userinput>\emph{my}</userinput> sentence.</para></listitem>
			<listitem><para><userinput>\textbf{I am making this text inside the brackets bold}</userinput>: this
			command makes your text bold.</para></listitem>
			<listitem><para><userinput>\quote</userinput>: to create a quote inside your document; begin your quote
			with <userinput>\begin{quote}</userinput> and end it with <userinput>\end{quote}</userinput>.</para></listitem>
			<listitem><para><userinput>\center</userinput>: centers the text.</para></listitem>
			<listitem><para><userinput>\verse</userinput>: creates offset text for poems.</para></listitem>
			<listitem><para><userinput>\itemize</userinput>: makes an itemized list.</para></listitem>
		</itemizedlist>

	</sect1>

	<sect1 id="quick_using">

		<title>Using &kile;</title>

		<para>Now that we have given you some background about how to write code using the
		&latex; markup language, we will show you how to create a document
		using &kile; step-by-step.</para>

		<procedure>
			<step><para>Start &kile;.</para></step>
			<step><para>Select <menuchoice><guimenu>Wizard</guimenu><guimenuitem>Quick Start</guimenuitem></menuchoice>,
			then choose a format, and set your preferences in the wizard.</para></step>
			<step><para>Once the wizard has entered text, do some customization to make the
			document more readable, add a minimum of one quote, some bold text,
			italics, and a verse to see the difference between the commands.</para></step>
			<step><para>Save your file, and give it the name <filename>intro.tex</filename>.</para></step>
			<step><para>Build your document using <keycombo>&Alt;<keycap>2</keycap></keycombo>, or the
			button labeled <guilabel>LaTeX</guilabel>.</para></step>
			<step><para>Select <guibutton>View DVI</guibutton>.</para></step>
			<step><para>Check out all your new text.</para></step>
			<step><para>When you are done viewing your document, click the <guibutton>Editor View</guibutton>
					button or press <keycombo>&Ctrl;<keycap>e</keycap></keycombo>
					to return to the editor if you are using the embedded 
			viewer, or close the viewer window if you are using a separate viewer.</para></step>
		</procedure>

		<para>That's it! You have just created your first &latex; document!</para>

		<para>Once you have created your DVI, you will be able to print your document, or change
		it into a &postscript; or PDF file if you want. Experiment and have fun!</para>

	</sect1>

	<sect1 id="quick_dvi">

		<title>DVI Files</title>

		<para>DVI stands for <emphasis>DeVice Independent</emphasis> file. These files are produced
		by &tex; or &latex; to be read by a driver of some sort on your computer. There are many different types of output that
		a <literal role="extension">.dvi</literal> can be sent to, such as a printer, &postscript; or PDF file converter, or your computer screen.</para>

	 	<sect2 id="quick_viewdvi">

			<title>Viewing a DVI</title>

			<para>You have already seen how to view a DVI file on the screen by using the <guibutton>View
			DVI</guibutton> button in the toolbar.</para>

		</sect2>

		<sect2 id="quick_printdvi">

		<title>Printing a DVI</title>

			<para>To print a DVI, you can use the same process that you used to create your
			document earlier (see <xref linkend="quick_using"/>). At step 7, after
			clicking <guibutton>View DVI</guibutton>, select
			<menuchoice><guimenu>File</guimenu><guimenuitem>Print</guimenuitem></menuchoice>
			in the viewer, and if you have your printer properly configured, you will be able 
			to print the DVI.</para>

		</sect2>

		<sect2 id="quick_exportdvi">

			<title>Converting DVI files</title>

			<para>The toolbar gives the options of Converting a DVI to other formats. Once you
			have created a DVI from your &latex; source code, you will be able to export it
			to a format of your choice using the toolbar buttons.</para>

		</sect2>

	</sect1>

	<sect1 id="quick_forward">

		<title>Forward Search between &kile; and &kdvi;</title>

		<para>The forward search functions allow you to jump from your
		editor directly into the associated position of the &DVI;
		file. </para>
		<para>&kile; offers a configuration with this option for all &latex; binaries.
		Go to <menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Tools</guimenuitem><guilabel>Build</guilabel></menuchoice>
		and always choose the <guilabel>Modern</guilabel> configuration.</para>

		<para>To execute a forward search, position the cursor on a line of source code, and click 
		<guilabel>Kdvi Forward Search</guilabel> to jump to the associated position 
		in the DVI viewer window.</para>
	</sect1>
	
	<sect1 id="quick_inverse">

		<title>Inverse Search between &kile; and &kdvi;</title>

		<para>Inverse search is a very useful feature when you are writing
		a &latex; document yourself. If everything is set up properly, you can
		click into &kdvi;'s window with the &MMB; (on some systems,
		when you do not have a three-button mouse, you can simultaneously
		use the <mousebutton>left</mousebutton> and the
		<mousebutton>right</mousebutton> button). After that kile load the &latex; source file and jump to
		the proper paragraph. To use inverse search, you have to compile your &latex; file with the <guilabel>Modern</guilabel> configuration.</para>

		<para>Inverse search cannot work unless:</para>

		<itemizedlist>
			<listitem><para>The source file has been compiled successfully.</para></listitem>
			<listitem><para>&kdvi; knows which editor you would like to use.</para></listitem>
		</itemizedlist>

		<para>With this feature of &kdvi;, a middle mouse click in the DVI document will
		result in &kile; opening the corresponding &latex; document and attempt to go to the
		corresponding line. Remember to tell &kdvi; to use &kile; as a text editor, in &kdvi;'s
		menu item <menuchoice><guimenu>Settings</guimenu><guimenuitem>DVI Options...</guimenuitem></menuchoice>.</para>
			
		<screenshot>
			<screeninfo>Configuring &kdvi;</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_kdvi_settings.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Configuring &kdvi;</phrase>
			</textobject>
			<caption><para>Configuring &kdvi;</para></caption>
			</mediaobject>
		</screenshot>
	</sect1>

	<sect1 id="quick_errors">

		<title>Resolving Errors</title>

		<para>If you are trying to use quickbuild, and the DVI viewer does not open, chances are
		you have an error. If you have an error, it will be visible in the log file / message area,
		and the summary of the error will be given.</para>

		<para>The log file will explain the source of the error in your code. In the
		editor, you can use the buttons in the toolbar labeled <guibutton>Previous LaTeX Error</guibutton>
		and <guibutton>Next LaTeX Error</guibutton> to jump to and from errors. The log file always states
		in which line the error occurred. To view the line where an error occurred, click on the error
		in the log window, and &kile; will take you to error's line.</para>

	</sect1>

</chapter>
<chapter id="startnew">

	<title>Starting a New Document</title>

	<para>When you click the button in the toolbar to begin a new document a dialog appears,
	asking which type of template you would like to use to write your document. The
	default choices are:</para>

	<itemizedlist>
		<listitem><para>Empty document</para></listitem>
		<listitem><para>Article</para></listitem>
		<listitem><para>Beamer</para></listitem>
		<listitem><para>Book</para></listitem>
		<listitem><para>HA-Prosper</para></listitem>
		<listitem><para>Letter</para></listitem>
		<listitem><para>Report</para></listitem>
		<listitem><para>Scrartcl (from the KOMA-Script package)</para></listitem>
		<listitem><para>Scrbook (from the KOMA-Script package)</para></listitem>
		<listitem><para>Scrlttr2 (from the KOMA-Script package)</para></listitem>
		<listitem><para>Scrreprt (from the KOMA-Script package)</para></listitem>
	</itemizedlist>

	<para>If you selected an <guilabel>Empty document</guilabel>, you can either start 
	writing a document from scratch, or you can use the wizard to quickly start a new 
	document (see <xref linkend="intro_docwizard"/>).</para>


	<sect1 id="startnew_templates">

		<title>Templates</title>

		<para>Frequent users of &latex; typically use the same preamble for almost every document they use. 
		Templates can be created, saved and loaded within &kile; to make it easier to start a new document.</para>


		<sect2>
			<title>Create a New Template</title>

			<para>To create a new template, you must first either open a &tex; / &latex; file, or create a file
			of your own. &kile; can generate a template from an existing document by opening the desired document and selecting
			<menuchoice><guimenu>File</guimenu><guimenuitem>Create Template from Document</guimenuitem></menuchoice>.</para>

		</sect2>

		<sect2>

			<title>Configuring Automatic Substitutions</title>

			<para>When creating a new document by selecting a template from
			<menuchoice><guimenu>File</guimenu><guimenuitem>New</guimenuitem></menuchoice>,
			certain character combinations will be replaced by data such as your name, 
			or the character encoding your are using. These variables can be configured in
			<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
			<guimenuitem>Settings</guimenuitem><guilabel>General</guilabel></menuchoice>.</para>

			<para>When designing your own template, it is useful to known which character 
			combinations are replaced by which template variables:</para>

			<itemizedlist>
				<listitem><para><userinput>$$AUTHOR$$</userinput>: This string
				will be replaced by the author variable.</para></listitem>
				<listitem><para><userinput>$$DOCUMENTCLASSOPTIONS$$</userinput>: This string will be replaced 
				by the documentclass options variable. Typically this is used as follows:
				<userinput>\documentclass[$$DOCUMENTCLASSOPTIONS$$]{article}</userinput>.</para></listitem>
				<listitem><para><userinput>$$INPUTENCODING$$</userinput>: If the
				inputencoding variable is set to, say, <userinput>latin1</userinput> this string is replaced by
				<userinput>\input[latin1]{inputenc}</userinput>.</para></listitem>
			</itemizedlist>

		</sect2>

		<sect2 id="templ_wiz">

			<title>Create a Template from the Wizard</title>

			<para>The easiest way to create a new template is to start the wizard,
			and then add commands in the editor. Once you have your
			document set up the way you like:</para>

			<procedure>
				<step><para>Save your file;</para></step>
				<step><para>Go to <guimenu>File</guimenu>;</para></step>
				<step><para>Choose <guimenuitem>Create Template from Document</guimenuitem>;</para></step>
				<step><para>Make any corrections necessary to the template;</para></step>
				<step><para>Enter a name for your new template;</para></step>
				<step><para>Click <guibutton>OK</guibutton> to add your template to the menu.</para></step>
			</procedure>

			<para>Next time you start up a new document, you will be able to choose 
			your customized template instead of the default ones.</para>

		</sect2>

		<sect2>

			<title>Creating a Template from any File</title>

			<para>A template can be created from any &latex; file. If you are looking for an easy way to
			configure a template, go find one you like on the Internet and follow the same steps
			listed in <xref linkend="templ_wiz"/>.</para>

			<para>For instance, you may want to create a full-fledged A0 poster. These posters are usually seen
			at scientific conferences, and &latex; will help you making an attractive, catchy poster. You can get a
			template for A0 posters at <ulink url="http://www.stats.ox.ac.uk/~marchini/a0poster.html">Jonathan Marchini's 
			home page</ulink>, but many more are available. Remember that you will need the <filename>a0poster</filename> 
			package, which is normally not in standard tex distributions included. Download it from
			<ulink url="http://www.ctan.org/tex-archive/macros/latex/contrib/a0poster/">here</ulink> and place it in the same directory as your &latex; file.</para>
		</sect2>

		 <sect2 id="templ_rem">

	 		<title>Removing a Template</title>

			<para>To remove a template from &kile;, do as follows:</para>

			<procedure>
				<step><para>Go to <menuchoice><guimenu>File</guimenu><guimenuitem>Remove 
				Template...</guimenuitem></menuchoice>;</para></step>
				<step><para>A dialog box will appear with all templates listed: select a template;</para></step>
				<step><para>Click <guilabel>OK</guilabel>, and your template will be removed.</para></step>
			</procedure>
			
			<para>Templates marked with an asterisk (*) cannot be removed without the proper permission.</para>

		</sect2>

	</sect1>

</chapter>
<chapter id="editing">

	<title>Editing &latex; Documents</title>

	<para>The internal editor that &kile; uses is &kate;.
	Kate is a text editor created for programmers, which incorporates the ability to read
	and highlight many different types of text files, among which are &latex; and &bibtex;; you can access
	many options for &kate; directly from &kile;'s <guimenu>Tools</guimenu> menu.</para>

	 <para>To learn more about &kate; and its capabilities, see the <ulink url="help:kate">Kate Handbook</ulink>.
	&kile; users can start reading from the chapter <quote>Working with the Kate Editor</quote>.</para>

	 <sect1 id="editing_sect">

		<title>The &latex; Reference</title>

		<para>&kile; features a very practical &latex; tag reference, which you can access
		by choosing <menuchoice><guimenu>Help</guimenu><guimenuitem>LaTeX 
		Reference</guimenuitem></menuchoice>. It contains a thorough description
		of almost all the commands that you may use in &latex; and their syntax.</para>

	</sect1>

	<sect1 id="editing_cursor">

	 	<title>Cursor Movements</title>
		
		<para>To select text, you have the following options:</para>

		<itemizedlist>
			<listitem><para>Hold left mouse button, and drag mouse to highlight text.</para></listitem>
			<listitem><para>Click once on a word to move the cursor to a new area.</para></listitem>
			<listitem><para>Click twice on a word to select the whole word.</para></listitem>
			<listitem><para>Click twice on a word and pressing <keycombo>&Ctrl;</keycombo> to select the whole tex word.
      This means clicking in this way on <userinput>\par</userinput> from <userinput>\par\bigskip</userinput> only select \par.</para></listitem>
			<listitem><para>Click three times to select the whole sentence.</para></listitem>
		</itemizedlist>

		<para>Holding the left mouse button, and dragging the text you want to select,
		automatically copies the selected text to the clipboard.</para>

		<para>Holding shift and using the arrow keys allows you to select portions of the source
		code in the editor window.</para>

	</sect1>

	<sect1 id="editing_bracket">

		<title>Brackets</title>

		<para>Bracket completion is a visual tool that the editor view uses to indicate you
		which bracket matches which. If you open any <literal role="extension">.tex</literal> file, 
		and select any bracket, whether it be a parenthesis (), square brackets [] or braces {}, the 
		editor will highlight the bracket and its match in yellow (this default color can be changed). 
		So, for example, if you position the cursor on the braces in 
		<userinput>\section{Introduction}</userinput>, you would see
		<userinput>\section{Introduction}</userinput> in the default yellow highlight,
		showing you the location of the beginning and ending brackets.</para>

	</sect1>

	<sect1 id="editing_highlight">

		<title>Highlighting</title>

		<para>&kile; has the ability to look for and highlight different types of code. For example, &latex; commands
			are distinguished from normal text, and math formulas are highlighted also in a different color.</para>
	
	</sect1>

	<sect1 id="editing_bullets">

		<title>Bullets</title>

		<para>Many wizards can insert optional bullets, a special kind of bookmarks within the text. The
		menu entries <menuchoice><guimenu>Edit</guimenu><guisubmenu>Bullets</guisubmenu></menuchoice> or 
		the corresponding keyboards shortcuts will allow you to jump to the next or last bullet. 
		This will also highlight this bullet so that it will be deleted automatically, 
		when you enter your first letter.</para>
		
		<screenshot>
			<screeninfo>Bullets</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="bullets.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Bullets</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<variablelist>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>Right</keycap></keycombo></shortcut>
		<guimenuitem>Next Bullet</guimenuitem></menuchoice></term>
		<listitem><para>Jump to the next bullet in the text if there is one.</para></listitem>
		</varlistentry>
	 
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>Left</keycap></keycombo></shortcut>
		<guimenuitem>Last Bullet</guimenuitem></menuchoice></term>
		<listitem><para>Jump to the previous bullet in the text if there is one.</para></listitem>
		</varlistentry>
		
		</variablelist>
		
	</sect1>
	
	<sect1 id="editing_select">

		<title>Select</title>
	
		<para>Editing is of course one of the main aspects when you use a program like &kile;. 
		Although &kate; already has great capabilities, &kile; adds some important features, 
		which are especially needed to write &latex; source. &latex; always needs a lot of 
		environments and groups, so &kile; supports very special commands to select them. 
		Under <menuchoice><guimenu>Edit</guimenu><guisubmenu>Select</guisubmenu></menuchoice> 
		you will find the following commands to select text.</para> 

		<screenshot>
			<screeninfo>Edit->Select items</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="select.png" format="PNG" />
			</imageobject>
			<textobject>
				<phrase>Edit->Select items</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<variablelist>
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>E</keycap></shortcut>
		<guimenuitem>Environment (inside)</guimenuitem></menuchoice></term>
		<listitem><para>Select an environment 
		without the surrounding tags.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>F</keycap></shortcut>
		<guimenuitem>Environment (outside)</guimenuitem></menuchoice></term>
		<listitem><para>Select an environment 
		including the surrounding tags.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>T</keycap></shortcut>
		<guimenuitem>TeX Group (inside)</guimenuitem></menuchoice></term>
		<listitem><para>Select a TeX group 
		inside the surrounding braces.</para></listitem>
		</varlistentry>
				
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>U</keycap></shortcut>
		<guimenuitem>TeX Group (outside)</guimenuitem></menuchoice></term>
		<listitem><para>Select a TeX group 
		including the surrounding braces.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
					<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
						<keycap>M</keycap></shortcut>
					<guimenuitem>Math Group</guimenuitem></menuchoice></term>
			<listitem><para>Select the current math group including the math commands.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>P</keycap></shortcut>
		<guimenuitem>Paragraph</guimenuitem></menuchoice></term>
		<listitem><para>Select a whole paragraph, 
		&ie; a group of text lines separated on both sides by empty lines.
		A paragraph does not mean just continuous lines of text, as it is
		in other text editors. This extended meaning also includes tables, &latex; 
		commands and all other lines of source. The only important thing for &kile;
		is that kind of paragraph is separated by two empty lines.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>L</keycap></shortcut>
		<guimenuitem>Line</guimenuitem></menuchoice></term>
		<listitem><para>Select the text line of the 
		current cursor position.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>S</keycap></keycombo>
		<keycap>W</keycap></shortcut>
		<guimenuitem>TeX Word</guimenuitem></menuchoice></term>
		<listitem><para>Select the word under 
		the current cursor position. This selection has also en extended meaning, 
		because this command can also select &latex; commands, which begin with a 
		backslash and may also have an optional star at the 
		end.</para></listitem>
		</varlistentry>

		</variablelist>
		
	</sect1>

	<sect1 id="editing_delete">

		<title>Delete</title>
	
		<para>To delete some parts of a document you can of course select them, and then 
		use the <keycombo><keycap>Delete</keycap></keycombo> key. Kate also offers the command
		<keycombo>&Ctrl;<keycap>K</keycap></keycombo> which deletes the hole line.But &kile; offers a 
		faster way with its own delete commands.
		Under <menuchoice><guimenu>Edit</guimenu><guisubmenu>Delete</guisubmenu></menuchoice> 
		you will find following commands to delete text.</para> 

		<screenshot>
			<screeninfo>Edit->Delete items</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="delete.png" format="PNG" />
			</imageobject>
			<textobject>
				<phrase>Edit->Delete items</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<variablelist>
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
		<keycap>E</keycap></shortcut>
		<guimenuitem>Environment (inside)</guimenuitem></menuchoice></term>
		<listitem><para>Delete an environment without the surrounding tags.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
		<keycap>F</keycap></shortcut>
		<guimenuitem>Environment (outside)</guimenuitem></menuchoice></term>
		<listitem><para>Delete an environment including the surrounding tags.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
		<keycap>T</keycap></shortcut>
		<guimenuitem>TeX Group (inside)</guimenuitem></menuchoice></term>
		<listitem><para>Delete a TeX group inside the surrounding braces.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
		<keycap>U</keycap></shortcut>
		<guimenuitem>TeX Group (outside)</guimenuitem></menuchoice></term>
		<listitem><para>Delete a TeX group including the surrounding braces.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
					<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
						<keycap>M</keycap></shortcut>
					<guimenuitem>Math Group</guimenuitem></menuchoice></term>
			<listitem><para>Delete the current math group including the math commands.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
		<keycap>P</keycap></shortcut>
		<guimenuitem>Paragraph</guimenuitem></menuchoice></term>
		<listitem><para>Delete a whole paragraph. Look at the 
		<menuchoice><guisubmenu>Select</guisubmenu><guimenuitem>Paragraph</guimenuitem></menuchoice>
		command, how a paragraph is 
		defined in &kile;.</para></listitem>
		</varlistentry>
		
		
		<varlistentry><term><menuchoice>
					<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
						<keycap>I</keycap></shortcut>
					<guimenuitem>To End of Line</guimenuitem></menuchoice></term>
			<listitem><para>Delete the text from the current cursor position to the end of the line.
				</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>T</keycap></keycombo>
		<keycap>W</keycap></shortcut>
		<guimenuitem>TeX Word</guimenuitem></menuchoice></term>
		<listitem><para>Delete the word or &latex;
		 command under the current cursor position.</para></listitem>
		</varlistentry>
		
		</variablelist>

	</sect1>

	<sect1 id="editing_environment">

		<title>Environment</title>
	
		<para>It was already mentioned that environments are a central point in &latex;.
		So &kile; offers five other commands to make the work with &latex; as easy as possible 
		under submenus <menuchoice><guimenu>Edit</guimenu><guisubmenu>Environment</guisubmenu></menuchoice>.</para>

		<screenshot>
			<screeninfo>Edit->Environment items</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="environment.png" format="PNG" />
			</imageobject>
			<textobject>
				<phrase>Edit->Environment items</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<variablelist>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>E</keycap></keycombo>
		<keycap>B</keycap></shortcut>
		<guimenuitem>Go to Begin</guimenuitem></menuchoice></term>
		<listitem><para>This command will jump to the beginning of the current environment, 
		wherever your current position is. The cursor will be placed directly 
		in front of the opening environment tag.</para></listitem>
		</varlistentry>
		
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>E</keycap></keycombo>
		<keycap>E</keycap></shortcut>
		<guimenuitem>Go to End</guimenuitem></menuchoice></term>
		<listitem><para>This command will jump to the end of the current environment, 
		wherever your current position is. The cursor will be placed directly 
		behind the closing environment tag.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>E</keycap></keycombo>
		<keycap>M</keycap></shortcut>
		<guimenuitem>Match</guimenuitem></menuchoice></term>
		<listitem><para>When your cursor is placed in front of or above the 
		<userinput>\begin{environment}</userinput> tag, it will be moved to the 
		opposite end of the environment and vice versa.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>E</keycap></keycombo>
		<keycap>C</keycap></shortcut>
		<guimenuitem>Close</guimenuitem></menuchoice></term>
		<listitem><para>Typing a lot of nested environment tags, you may lose 
		control of all those environments. This command will close the last 
		opened environment, so that the nested structure of environments 
		will not be broken.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
					<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>E</keycap></keycombo>
						<keycap>A</keycap></shortcut>
					<guimenuitem>Close All</guimenuitem></menuchoice></term>
			<listitem><para>This closes all open environments, not only the last opened environment.</para></listitem>
		</varlistentry>

		</variablelist>
		
	</sect1>
	
	<sect1 id="editing_texgroup">

		<title>&tex; Group</title>
		
		<para>&kile; also offers some special commands for &latex; groups;, 
		which are determined by braces <userinput>{...}</userinput>. In submenu 
		<menuchoice><guimenu>Edit</guimenu><guisubmenu>TeX Group</guisubmenu></menuchoice>
		you will find some important commands, which correspond to those from
		<menuchoice><guimenu>Edit</guimenu><guisubmenu>Environment</guisubmenu></menuchoice>.
		</para>
		
		<screenshot>
			<screeninfo>Edit->TeX Group</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="texgroup.png" format="PNG" />
			</imageobject>
			<textobject>
				<phrase>Edit->TeX Group</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<variablelist>
		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>G</keycap></keycombo>
		<keycap>B</keycap></shortcut>
		<guimenuitem>Go to Begin</guimenuitem></menuchoice></term>
		<listitem><para>This command will jump to the beginning of the current group, 
		wherever your current position is. The cursor will be placed directly in front 
		of the opening brace.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>G</keycap></keycombo>
		<keycap>E</keycap></shortcut>
		<guimenuitem>Go to End</guimenuitem></menuchoice></term>
		<listitem><para>This command will jump to the end of the current group, 
		wherever your current position is. The cursor will be placed directly 
		behind the closing brace.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>G</keycap></keycombo>
		<keycap>M</keycap></shortcut>
		<guimenuitem>Match</guimenuitem></menuchoice></term>
		<listitem><para>When your cursor is placed in front of or behind an 
		opening brace of a &tex; group, he will be moved to the opposite end of 
		the group and vice versa.</para></listitem>
		</varlistentry>

		<varlistentry><term><menuchoice>
		<shortcut><keycombo action="simul">&Ctrl;&Alt;<keycap>G</keycap></keycombo>
		<keycap>C</keycap></shortcut>
		<guimenuitem>Close</guimenuitem></menuchoice></term>
		<listitem><para>Typing a lot of nested group braces may be hard work. 
		This command will close the last opened group, so that the nested 
		structure of &tex; groups will not be broken.</para></listitem>
		</varlistentry>
		
		</variablelist>
		
	</sect1>

	<sect1 id="editing_dblquotes">

		<title>Double Quotes</title>

		<para>In &latex;, two single quotes are used as double quotes. To  
		help you insert these efficiently, &kile; allows you to press 
		<keycap>"</keycap> to insert two opening 
		single quotes. Furthermore, if you want to close a quotation, you also 
		have to press <keycap>"</keycap>. &kile; will 
		be smart enough to recognize this case and inserts two closing quotes 
		for &latex;.</para>

		<para>To get a literal double quote on the other side, press 
		<keycap>"</keycap> twice.</para>

		<para>You can enable or disable this auto insertion of opening and 
		closing double quotes in section 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure
		Kile...</guisubmenu><guimenuitem>LaTeX</guimenuitem></menuchoice>.</para>

		<screenshot>
			<screeninfo>Double Quotes</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="config-dblquotes.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Double Quotes</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<para>If you also include language-specific options 
		like <userinput>ngerman</userinput> or <userinput>french</userinput>, 
		you will also be able to use German or French double quotes. Many more languages are available.
    </para>

	</sect1>

	<sect1 id="editing_smartnewline">

		<title>Smart Newline</title>

		<para>If you press <keycombo>&Shift;<keycap>Return</keycap></keycombo>, 
		&kile; inserts an intelligent newline. If your current position 
		is inside a list environment, like <userinput>enumerate</userinput> 
		or <userinput>itemize</userinput>, &kile; will not only insert 
		a newline, but also add a <userinput>\item</userinput> command.</para>

		<para>If you are inside a tabular environment, &kile; will finish the 
		current line with <userinput>\\</userinput>, followed by the newline.</para>
  
    <para>If you are inside a &latex; comment, &kile; will start the next line with a
    <userinput>%</userinput>.</para>

		<para>Even better, &kile; is smart enough to support predefined &latex;
		and user defined environment, which can be added in section 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure
		Kile...</guisubmenu><guimenuitem>LaTeX</guimenuitem></menuchoice>.</para>

	</sect1>

	<sect1 id="editing_tabulator">

		<title>Smart Tabulator</title>

		<para>Some users like to arrange columns in tabular environments and
		put all ampersand characters <keycap>&amp;</keycap> beneath each other. &kile; tries
		to support this. If you press <keycombo>&Shift;&Alt;<keycap>&amp;</keycap></keycombo>, 
		&kile; will look for the next tab in the row above. Although his which may not the  
		corresponding tab, &kile; will add some spaces to adjust the column position with 
		the current tab.</para>

	</sect1>

</chapter>

<chapter id="completion">

	<title>Code Completion</title>
	
	<para>Although &kate; already offers a good completion mode, &kile; extended 
	code completion to support some special methods especially for &latex;. Five different 
	modes are integrated. Three of them work on demand, the other two are autocompletion 
	modes. All modes can be configured to work very differently at 
	<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure Kile...</guimenuitem></menuchoice>.</para>

	<sect1 id="complete_autoenvironment">

		<title>Automatic Environment Completion</title>

		<para>When you begin a new environment, typing <userinput>\begin{environment}</userinput>,
		&kile; will automatically add an <userinput>\end{environment}</userinput> command, with a 
		line in between for your text.</para>

		<para>Autocompletion can be turned off in the &latex; section of
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>LaTeX</guimenuitem><guilabel>Environments</guilabel></menuchoice>.</para>

		<screenshot>
			<screeninfo>Completing an Equation Environment</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_autocomplete.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Completing an Equation Environment</phrase>
			</textobject>
			<caption><para>Completing an Equation Environment</para></caption>
			</mediaobject>
		</screenshot>

	</sect1>
	
	<sect1 id="complete_command">
	
		<title>&latex; Commands</title>

		<para>When you type some letters, you can activate this completion mode for &latex; commands 
		and normal words with <menuchoice><guimenu>Edit</guimenu><guisubmenu>Complete</guisubmenu><guimenuitem>(La)TeX Command</guimenuitem></menuchoice> or the keyboard shortcut 
		<keycombo>&Ctrl;<keycap>Space</keycap></keycombo>. 
		&kile; first reads the letters from the current cursor position to the 
		left and stops at the first non-letter character or a backslash. If this 
		pattern begins with a backslash, &kile; will enter completion mode for &tex; or &latex; 
		commands. Otherwise it enters normal dictionary mode, where you will not find any 
		&latex; commands. Depending on the chosen mode, a completion box will be opened. 
		You will see all commands or words whose beginning matches the current pattern. 
		You can navigate with the cursor keys through this list and select one entry with 
		&Enter; or a double click with the mouse.</para>

		<screenshot>
			<screeninfo>Completing a LaTeX Command</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="complete_cmd1.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Completing a LaTeX Command</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<para>When you push the &Backspace; key, the last letter of your 
		pattern will be deleted, and the completion list may grow. On the other hand, if 
		you type another letter will expand the pattern and the 
		visible word list may shrink.</para>

		<para>If you decide not to select any of the suggestions, you can leave this 
		dialog with &Esc;.</para>

		<para>You will see that all commands are written with a short description of 
		their parameters. These descriptions are of course stripped when you select a command. 
		Optionally you can let &kile; insert bullets at these places, so that you can easily 
		jump to the these positions with <menuchoice><guimenu>Edit</guimenu><guisubmenu>Bullets</guisubmenu><guimenuitem>Next Bullet</guimenuitem></menuchoice> 
		and insert the parameter you want.</para>

		<screenshot>
			<screeninfo>Completing a LaTeX Command</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="complete_cmd2.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Completing a LaTeX Command</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<para>Go to 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Kile</guimenuitem><guilabel>Complete</guilabel></menuchoice>
		to configure one or more of these lists. You can choose different word lists 
		for &tex; and &latex; commands and dictionary mode for normal words.</para> 
		
	</sect1>

	<sect1 id="complete_environment">

		<title>Environments</title>
		
		<para>The <emphasis>command mode</emphasis> is not useful to complete environments. 
		You always have to type some letters of <userinput>\begin</userinput>, and invoking 
		the completion mode will result in a huge list of environments tags. On the other 
		hand, environments are so often used that &kile; offers a special mode to complete 
		environments. Forget the opening tag and write, for example, <userinput>eq</userinput>.</para> 

		<para>When you call the completion mode with 
		<menuchoice><guimenu>Edit</guimenu><guisubmenu>Complete</guisubmenu><guimenuitem>Environment</guimenuitem></menuchoice> or keyboard shortcut <keycombo>&Alt;<keycap>Space</keycap></keycombo>,
		the opening tag is automatically added and you will see <userinput>\begin{eq}</userinput>. 
		After this change, the completion list is much less cluttered.</para>

		<screenshot>
			<screeninfo>Completing a LaTeX Command</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="complete_env1.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Completing a LaTeX Command</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<para>Now select an environment, and you will see that it is also automatically closed. 
		Even more, if &kile; recognizes it as a list environment, it will also insert a first 
		<userinput>\item</userinput> tag.</para>
		
		<screenshot>
			<screeninfo>Completing a LaTeX Command</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="complete_env2.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Completing a LaTeX Command</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<para>Go to 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Kile</guimenuitem><guilabel>Complete</guilabel></menuchoice>
		to configure one or more of these lists. This mode uses the same word lists as the 
		completion mode for &tex; and &latex; commands.</para> 

	</sect1>
	
	<sect1 id="complete_abbreviation">

		<title>Abbreviations</title>

		<para>&kile; supports user defined lists of abbreviations, which are replaced 
		on demand by longer text strings. Look at 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Kile</guimenuitem><guilabel>Complete</guilabel></menuchoice>
		to configure one or more of theses lists. For the example given here, the 
		abbreviation list in <filename>example.cwl</filename> must be chosen. 
		In this file you will find for example the entry <userinput>L=\LaTeX</userinput> for example.</para>

		<para>For example, type only the letter <userinput>L</userinput>. Now invoke 
		the abbreviation mode of word completion with 
		<menuchoice><guimenu>Edit</guimenu><guisubmenu>Complete</guisubmenu><guimenuitem>Abbreviation</guimenuitem></menuchoice> or keyboard shortcut <keycombo>&Ctrl;&Alt;<keycap>Space</keycap></keycombo>,
		and the letter <userinput>L</userinput> is replaced by the string 
		<userinput>\LaTeX</userinput>.</para>

	</sect1>
	
	<sect1 id="complete_auto">

		<title>Autocompletion Modes</title>

		<sect2 id="complete_autolatex">

			<title>&latex; Commands</title>

			<para>You can also enable an autocompletion mode for &latex; commands. 
			When a given threshold of letters (default: 3) is entered, a popup window opens 
			with a list of all matching &latex; commands. You can select one of these commands, 
			or ignore this window and type further letters. The entries of the completion box 
			will always change and match your currently typed word.</para>

			<para>Go to 
			<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
			<guimenuitem>Kile</guimenuitem><guilabel>Complete</guilabel></menuchoice>
			to enable or disable this mode or to change the threshold.</para>
			
		<screenshot>
			<screeninfo>Completing an Equation Environment</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="config-complete.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Completing an Equation Environment</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		</sect2>
		
		<sect2 id="complete_autotext">

			<title>Document Words</title>

			<para>Large dictionaries are not useful in autocompletion mode. But, we have seen 
			that a lot of words in a document are typed more than once. So &kile; offers a 
			completion for all words from the document that the user has already typed before.</para>

			<para>If you want to turn this mode on or off, go to
			<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
			<guimenuitem>Kile</guimenuitem><guilabel>Complete</guilabel></menuchoice>.
			In this configuration dialog you can also change the threshold at which 
			the completion box pops up.</para>
	
		</sect2>	

	</sect1>
	
	<sect1 id="complete_own_files">

		<title>Writing Own Completion Files</title>

    <para>The specification of the completion file format can found in the <ulink url="http://websvn.kde.org/*checkout*/tags/kile/2.0/src/README.cwl">
		CWL file format specification</ulink>.
		</para>

		<para>
		Completion files can be installed in a user's home directory under the <filename>~/.trinity/share/apps/kile/complete/&lt;mode&gt;/</filename>
		subdirectory, where <parameter>&lt;mode&gt;</parameter> either stands for <constant>abbreviation</constant>, <constant>dictionary</constant> or	<constant>tex</constant>.
		</para>

	</sect1>
</chapter>

<chapter id="wizard">

	<title>Wizards and Dialogs</title>

	<sect1 id="wizard_graphics">

		<title>Include Graphics</title>

		<para>The <guilabel>Include Graphics</guilabel> dialog makes insertion of
		graphics as easy as possible. Please take a look at 
		<xref linkend="build_graphics"/> and <xref linkend="build_epsgraphics"/> to
		get an overview of some basic facts concerning graphic formats.</para>

		<screenshot>
			<screeninfo>Including a graphics element</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="includegraphics.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Including a graphics element</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<procedure>
		<step><para>Choose a graphics file. This can be a JPEG, PNG, EPS 
		or even a zipped or gzipped EPS file. If you have installed 
		<ulink url="http://www.imagemagick.org/">&imagemagick;</ulink>
		and also configured &kile; to use it 
		(<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>LaTeX</guimenuitem><guilabel>General</guilabel></menuchoice>), 
		the width and the height of the graphic is automatically shown. 
		If &imagemagick; can determine a resolution, the size of the graphics 
		is also shown in centimeters.</para></step>

		<step><para>Decide whether your image shall be centered on the page.</para></step>

		<step><para>Choose either traditional &latex; or &pdflatex;. 
		Please remember that &pdflatex; can also create DVI output, 
		not only PDF.</para></step>

		<step><para>You can choose whether the filename should be taken 
		relative. This is the preferred way, when you use the
		<userinput>\graphicspath</userinput> command.</para>

		<para>By default graphics files have to be in the same 
		folder than your master document. However 
		it is possible to put them in other folders to make 
		things tidier. Without a <userinput>\graphicspath</userinput> 
		command, &kile; would include the path for the graphics file. 
		But if you use <userinput>\graphicspath</userinput>,
		like:</para>

<programlisting>
	\graphicspath{{/path/to/my/graphics}{other/path/to/more/graphics}} 
</programlisting>

		<para>and check this option, &kile; with only use the 
		base name of the graphics file.</para>

		<para>Another example: if you set <userinput>\graphicspath</userinput> 
		command like:</para>

<programlisting>
	\graphicspath{{./}{camera/}{images/}}
</programlisting>

		<para>&latex; will search in the current folder, then in 
		<filename>camera</filename> and finally in 
		<filename>images</filename> to find your graphics file.</para></step>

		<step><para>If you choose either a width or a height, the whole graphics 
		will be proportionally scaled. If you set two values for width and height 
		at the same time, width and height may be scaled with different factors,
		and this could not be what you want. See also the information near the top 
		of dialog to know the original size of the graphics.</para></step>

		<step><para>Insert an angle by which to rotate the graphics counterclockwise.</para></step>

		<step><para>The bounding-box information is set automatically 
		when you choose a graphics file. This information is only needed 
		when you work with traditional &latex; and bitmapped graphics. 
		See the discussion of <link linkend="build_epsgraphics">EPS graphics</link>. 
		</para></step> 

		<step><para>Your last choice is whether to embed this graphics into a 
		figure environment. If you decide to do so, you can also insert a 
		caption and a label. It is a good idea to add a different prefix to 
		each kind of label. It is common to use the prefix 
		<userinput>fig:</userinput> for images.</para></step> 
		</procedure>
		
	</sect1>
	
	<sect1 id="wizard_array">

		<title>Array Wizard</title>

		<para>One of the most boring jobs one can do in &latex; is to write a matrix or a 
		tabular environment. One has to keep track of all the elements, ensure that the environment
		is well formed, and that all things are where they are supposed to be. Good indentation helps, 
		but there is a simpler way: using &kile;'s <guimenu>Wizard</guimenu> menu. It contains
		<guimenuitem>Tabular</guimenuitem> and <guimenuitem>Array</guimenuitem> (used in math environments).
		You will then have a matrix-formed input form that you can easily fill in with your entries. This dialog also 
		offers some options to typeset the tabular material.</para>

		<screenshot>
			<screeninfo>Inserting a tabular environment</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="dialog-tabular.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Inserting a tabular environment</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<para>The <guimenuitem>Tabbing</guimenuitem> option will display a simpler menu 
		to set up a tabbing environment. In all these environments, you can easily set the
		number of rows and columns, along with other specific options.</para>
	</sect1>

	<sect1 id="wizard_postscript">

		<title>&postscript; Utilities</title>

		<para>PS files are not so popular as PDF files, but are an excellent base 
		for manipulations and rearrangements of pages. If you need PDF
		output, you can rearrange pages with some &postscript; utilities and then 
		convert it to PDF with <command>ps2pdf</command>.</para>
		
		<para>The <emphasis>&postscript; Wizard</emphasis> will suggest the most 
		popular rearrangements, but you are free to do your own choice. Work is done 
		by the programs <command>pstops</command> and <command>psselect</command>, which
		you will find in most distributions in the package <userinput>psutils</userinput>.
		If one of these programs is not available, the corresponding item will not 
		be visible.</para>
		
		<screenshot>
			<screeninfo>Dialog PSTools</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="dialog-pstools.png" format="PNG" />
			</imageobject>
			<textobject>
				<phrase>Dialog PSTools</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<para>First choose your input file. If &kile; finds a PS file corresponding to your 
		current master document, it is already filled in as input file, but you are also free 
		to choose another file. Then choose an output file, and select one of the tasks. 
		Finally, you have to decide whether you want to do the conversion only, or also invoke
		&kghostview; to view the result.</para>
		
		<variablelist>
		
		<varlistentry>
		<term>1 A5 page + empty page --> A4</term>
		<listitem><para>Combine one A5 page together with one empty page 
		on one A4 page. Whenever two A5 pages are combined together, 
		they are rotated 90 degrees and will be arranged 
		on an A4 page in landscape mode.</para>
		<screenshot>
			<screeninfo>A5 + empty page</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils1.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>A5 + empty page</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
	
		<varlistentry>
		<term>1 A5 page + duplicate --> A4</term>
		<listitem><para>Put one A5 page and a duplicate together
		on one A4 page.</para>
		<screenshot>
			<screeninfo>duplicate A5 pages</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils2.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Duplicate an A5 page</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
		
		<varlistentry>
		<term>2 A5 pages --> A4</term>
		<listitem><para>Put two consecutive A5 pages together
		on one A4 page.</para>
		<screenshot>
			<screeninfo>Combine two A5 pages</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils3.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Combine two A5 pages</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
		
		<varlistentry>
		<term>2 A5L pages --> A4</term>
		<listitem><para>Put two consecutive A5 pages in landscape mode together
		on one A4 page.</para></listitem>
		</varlistentry>
		
		<varlistentry>
		<term>4 A5 pages --> A4</term>
		<listitem><para>Combine four consecutive A5 pages together on one 
		A4 page. The A5 pages have to be scaled with factor 0.7 to fit 
		on the page.</para>
		<screenshot>
			<screeninfo>4 A5 pages --> A4</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils5.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>4 A5 pages --> A4</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
		
		<varlistentry>
		<term>1 A4 page + empty page --> A4</term>
		<listitem><para>Combine one A4 page together with one empty page 
		on one A4 page. Whenever two A4 pages are combined together on one 
		resulting A4 page, they have to be scaled with factor 0.7 and will 
		be arranged in portrait mode.</para>
		<screenshot>
			<screeninfo>1 A4 page + empty page --> A4</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils6.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>1 A4 page + empty page --> A4</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
		
		<varlistentry>
		<term>1 A4 page + duplicate --> A4</term>
		<listitem><para>Put one A4 page and a duplicate together
		on one A4 page.</para>
		<screenshot>
			<screeninfo>1 A4 page + duplicate --> A4</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils7.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>1 A4 page + duplicate --> A4</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
		
		<varlistentry>
		<term>2 A4 pages --> A4</term>
		<listitem><para>Put two consecutive A4 pages together
		on one A4 page.</para>
		<screenshot>
			<screeninfo>Combine two A4 pages</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils8.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Combine two A4 pages</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
			
		<varlistentry>
		<term>2 A4L pages --> A4</term>
		<listitem><para>Put two consecutive A4 pages in landscape mode together
		on one A4 page.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>select even pages</term>
		<listitem><para>Select all even pages of a document.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>select odd pages</term>
		<listitem><para>Select all odd pages of a document.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>select even pages (reverse order)</term>
		<listitem><para>Select all even pages of a document and reverse the order.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>select odd pages (reverse order)</term>
		<listitem><para>Select all even pages of a document and reverse the order.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>reverse all pages</term>
		<listitem><para>Reverse all pages of a document.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>copy all pages (sorted)</term>
		<listitem><para>Copy all pages of a document. You have to
		choose the number of sorted copies.</para>
		<screenshot>
			<screeninfo>Copy all pages (sorted)</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils15.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Copy all pages (sorted)</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
			
		<varlistentry>
		<term>copy all pages (unsorted)</term>
		<listitem><para>Copy all pages of a document. You have to
		choose the number of non-sorted copies.</para>
		<screenshot>
			<screeninfo>Copy all pages (unsorted)</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="psutils16.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Copy all pages (unsorted)</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		</varlistentry>
			
		<varlistentry>
		<term>pstops: choose parameter</term>
		<listitem><para>There are many options for &postscript; utilities 
		<command>pstops</command> and <command>psselect</command>. If you 
		need a very special one, you can invoke <command>pstops</command> with 
		an option of your choice. Please read the manual for all possible
		options.</para></listitem>
		</varlistentry>
			
		<varlistentry>
		<term>psselect: choose parameter</term>
		<listitem><para>You can invoke <command>psselect</command> with 
		an option of your choice. Please read the manual for all possible
		options.</para></listitem>
		</varlistentry>
		
		</variablelist>
		
	</sect1>

	<sect1 id="statistics">	
		<title>Document Statistics</title>
		
		<para>The statistics dialog gives you an statistical overview for a selection,
		a document or an hole project. It includes the number of words, &latex; 
		commands/environments and also includes the number of characters for each type.
		The statistical numbers can be copied as text or as a nice formatted &latex; tabular
		to the clipboard. If you want to get statistics for the hole project you can use 
		<menuchoice><guimenu>File</guimenu><guisubmenu>Open All Project Files</guisubmenu></menuchoice>
    for an easy and quick way to open all source files of your project.</para>
		<para>A note of caution has to be sounded about the accuracy of the numbers.
		We have included some logic to get a good estimate, e. g. K\"uhler gives one word and one command,
		with six resp. two characters. But there are other combinations in which parts of commands
		are counted as words and vice versa. It has also to be beared in mind that the algorithm
		was developed and tested for languages similiar to english or german.
		So don't take the numbers for granted. If you have to make an report with an
		exact numbers of words or characters, make some tests to check whether &kile;'s accuracy satisfies your needs.</para>
	</sect1>

</chapter>

<chapter id="latex">

	<title>Special Tags in &latex;</title>

	<sect1 id="latex_library">
		<title>Using the &latex; Tag Library</title>

		<para>&latex; has thousands of tags for symbols and special characters.
		The easiest way to insert these tags is to use the sidebar menu, 
		left of the editor window.</para>

		<screenshot>
			<screeninfo>The Sidebar Menu</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_sidebarmenu.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>The Sidebar Menu</phrase>
			</textobject>
			<caption><para>The Sidebar Menu</para></caption>
			</mediaobject>
		</screenshot>
		<para>The following types are avaible:</para>

		<itemizedlist>
			<listitem><para>Most Frequently Used</para></listitem>
			<listitem><para>Relation</para></listitem>
			<listitem><para>Operators</para></listitem>
			<listitem><para>Arrows</para></listitem>
			<listitem><para>Miscellaneous Math</para></listitem>
			<listitem><para>Miscellaneous Text</para></listitem>
			<listitem><para>Delimiters</para></listitem>
			<listitem><para>Greek</para></listitem>
			<listitem><para>Special Characters</para></listitem>
			<listitem><para>Cyrillic Characters</para></listitem>
			<listitem><para>User Defined</para></listitem>
		</itemizedlist>
		<para>The tooltips of the icons show the &latex; commands and additionally needed packages.</para>
		<para>Pressing <keycombo>&Shift;</keycombo> and clicking a symbol will result in 
		<userinput>$\symbolcmd$</userinput> being inserted. Similiar pressing <keycombo>&Ctrl;</keycombo> 
		inserts it in curly brackets.</para>
		<para>If you insert a command which requires a package which is not included in your &latex; document,
		you will see a warning message in the logview window.</para>
		<para>The first list of symbols holds the <guilabel>Most Frequently Used</guilabel> symbols. Inserted symbols will be 
			added to this list, for quick and easy reference. The ordering of the symbols will not be changed
			upon addition of new symbols, instead a reference counter is incremented. If the number of items
			would exceed 30 items, the item wit the lowest count will get removed.</para>
		<para>The <guilabel>User Defined</guilabel> symbol list can hold your own symbols.
		To create your own symbols you need the program gesymb and the file definitions.tex from the kile source package.
 		Additionaly you need a &latex; compiler (what a surprise) and 
		<ulink url="http://www.dvipng.sourceforge.net">&dvipng;</ulink> (version 1.7 or later).
 		The procedure is so that you create a &latex; file with <userinput>\input{definitions}</userinput>,
 		which makes the commands listed below available, and let <userinput>gesymb mysymbols.tex user</userinput> 
		(which calles &latex; and &dvipng;) create the icons. After copying them to 
		<userinput>$HOME/.trinity/share/apps/kile/mathsymbols/user/</userinput> and restarting kile you can use your own symbols.
		</para>
		<para>
		The following commands are defined in definitions.tex:
		<itemizedlist>
			<listitem>
				<para>
					<userinput>\command[\optarg]{\symbol}</userinput>: Include the symbol <userinput>\symbol</userinput> in the
					symbol list, the optional argument <userinput>\optarg</userinput> specifies the command which kile should insert.
					If it is not given the command in the mandatory argument is used.
				</para>
			</listitem>
			<listitem>
				<para>
					<userinput>\mathcommand[\optarg]{\symbol}</userinput>: Same as above, except that the command in the mandatory
					argument is inserted in math mode.
				</para>
			</listitem>
			<listitem>
				<para>
					<userinput>\pkgs[arg]{pkg}</userinput>: Declare that the command given in this line needs the &latex; package
					<userinput>pkg</userinput> with the optional argument <userinput>arg</userinput>. This command has to be in
					front of the <userinput>\command</userinput> command and overrides any package specification by the neededpkgs
					enviroment.
				</para>
			</listitem>
			<listitem>
				<para>
					<userinput>\begin{neededpkgs}[pkgs-args]{pkgs} ... \end{neededpkgs}</userinput>: Has the same effect as
					above, but for all enclosed commands.
				</para>
			</listitem>
		</itemizedlist>
		</para>
		<para>
		An example for completeness is given here:
 		<screen><userinput>
		\documentclass[a4paper,10pt]{article}
		\usepackage{amssymb}
		\input{definitions}
		%
		\begin{document}
		\pagestyle{empty}
		%
		\begin{neededpkgs}{amssymb}
		\mathcommand{\surd}
		\pkgs{amsmath}\mathcommand[\ddddot{}]{\ddddot{a}}
		\mathcommand{\angle}
		\end{neededpkgs}
		\command{\"A}
		\mathcommand{\exists}
		\mathcommand[\stackrel{}{}]{\stackrel{abc}{=}}
		
		%\begin{neededpkgs}[russian,koi8-r,T2C,]{babel,inputenc,fontenc,mathtext}
		%   	
		%   \end{neededpkgs}
		% this would need to include the packages
		% \usepackage{mathtext}
		% \usepackage[T2C]{fontenc}
		% \usepackage[russian]{babel}
		% \usepackage[koi8-r]{inputenc}
		%  just to explain the format
		\end{document}
		</userinput></screen>
		</para>
	</sect1>

	<sect1 id="latex_bib">

		<title>Using Bibitems</title>

		<para><userinput>\bibitem</userinput> is a command used to enter a reference in a
		<userinput>thebibliography</userinput> environment in your document. The syntax for using
		<userinput>\bibitem</userinput> is <userinput>\bibitem[label]{key}</userinput>.</para>

		<para>The optional <userinput>[label]</userinput> is for you to add your own 
		labeling system for the bibliography entry. If no label is set, the entries 
		will be set in numerical order: [1], [2], [3], etc.</para>

		<para>The argument <userinput>{key}</userinput> is used to reference and link the commands
		<userinput>\bibitem</userinput> and <userinput>\cite</userinput> to
		each other and the information they contain. The command <userinput>\cite</userinput> contains the
		label associated with the intended <userinput>\bibitem</userinput>, which is located inside a
		<userinput>thebibliography</userinput> environment, and contains the reference data.
		Both corresponding <userinput>\bibitem</userinput> and <userinput>\cite</userinput> must
		have the same <userinput>{key}</userinput>; the easiest way to organize keys is by 
		the author's last name. The secondary braces in the <userinput>thebibliography</userinput> 
		environment denote the longest bibliography label you expect to have. 
		So, inserting <userinput>{<replaceable>foo</replaceable>}</userinput> means 
		you can have any label shorter or as large as the expression 
		<userinput><replaceable>foo</replaceable></userinput>. Failure to set this parameter correctly 
		may result in a not so attractive indentation of your bibliography.</para>

		<para>The bibliography is a section apart from your main document, and an example of
		code for the bibliography would look like the following:</para>

		<screen><userinput>
		\begin{thebibliography}{50}
		\bibitem{Simpson} Homer J. Simpson. \textsl{Mmmmm...donuts}.
		Evergreen Terrace Printing Co., Springfield, SomewhereUSA, 1998
		\end{thebibliography)</userinput></screen>

		<para>Then, your main source code would contain the location of the information relating to
		the <userinput>\bibitem</userinput> using <userinput>\cite</userinput>. That source code would look similar to this:</para>

		<screen><userinput>
		My thesis, about the philosophy of The Simpsons\copyright
		comes from my favorite book \cite{Simpson}.</userinput></screen>

		<para>As it is often difficult to remember the exact citation key once you have many 
		references, &kile; provides an easy way to insert a citation. On the <guilabel>Edit</guilabel> 
		toolbar click on the second drop-down box (usually it reads <guilabel>label</guilabel>) and select 
		<guilabel>cite</guilabel>. A list with all the citation keys pops up: select the correct 
		reference and a citation will be inserted into your document. To update the list of keys, 
		either save the file,<menuchoice><guimenu>Edit</guimenu><guimenuitem>Refresh 
		Structure</guimenuitem></menuchoice> or press <keycap>F12</keycap>.</para>

		<para>The final product in your document's bibliography would then look like this:</para>

		<para><computeroutput>[1] Homer J. Simpson. Mmmmm...donuts. Evergreen Terrace Printing Co.,
		Springfield, SomewhereUSA, 1998.</computeroutput></para>

		<para>The easiest way to work with <userinput>\bibitem</userinput> and
		<userinput>\cite</userinput> is to use the toolbar drop-down box marked
		<guilabel>cite</guilabel>. When you select a citation to insert, you will be given the list of
		<userinput>bibitem</userinput>s you have created so far, and will be able to select the
		reference from the list. &kile; can also work together with &bibtex; editor applications,
		such as &kbibtex; to help make citations easier.</para>

	</sect1>

	<sect1 id="latex_usertags">

		<title>User-Defined Tags</title>

		<para>&kile; gives you the ability to make your own tags. A tag is similar
		to a shortcut that launches some command or writes frequently-used text.
		For example, Joe Sixpack uses often the sentences <userinput>I prefer \LaTeX\ 
		to \TeX\</userinput> and <userinput>What would I do without Linux?</userinput>. 
		To create user-defined tags to write these sentences, he would access 
		<menuchoice><guimenu>LaTeX</guimenu><guisubmenu>User Tags</guisubmenu><guimenuitem>Edit 
		User Tags...</guimenuitem></menuchoice>; this will present him a dialog where he can create 
		his own user-defined tags.</para>
		<screenshot>
			<screeninfo>The Edit User Tags Dialog</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_editusertag.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>The Edit User Tags Dialog</phrase>
			</textobject>
			<caption><para>The Edit User Tags Dialog</para></caption>
			</mediaobject>
		</screenshot>

		<screenshot>
			<screeninfo>Invoking a User-Defined Tag</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_usertag.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Invoking a User Defined Tag</phrase>
			</textobject>
			<caption><para>Invoking a User Defined Tag</para></caption>
			</mediaobject>
		</screenshot>

		<para>He would probably give each tag a name that can clearly identify it. The name you give your tag 
		is entered in the section marked <guilabel>Menu item</guilabel>, and the text of frequently-used command 
		should be entered into the section labeled <guilabel>Value</guilabel>. Once the commands are entered, 
		he can use them quickly using the shortcut <keycombo>&Ctrl;&Shift;<keycap>1</keycap></keycombo> for 
		the first tag to enter <userinput>I prefer \LaTeX\ to \TeX\</userinput> and <keycombo>&Ctrl;&Shift;
		<keycap>2</keycap></keycombo> to enter <userinput>What would I do without Linux?</userinput>.</para>

		<sect2 id="latex_usertags_uc">

			<title>Placeholders in User-Defined Tags</title>

			<para>There are some placeholders you can use in user-defined tags: 
			they are <userinput>%B</userinput>, <userinput>%C</userinput>, <userinput>%M</userinput> and
			<userinput>%S</userinput>.</para>

			<itemizedlist>
				<listitem><para><userinput>%B</userinput>: will be replaced by a bullet.</para></listitem>
				<listitem><para><userinput>%C</userinput>: this is where the cursor will be placed after the insertion of a
				user-defined tag.</para></listitem>
				<listitem><para><userinput>%M</userinput>: this stands for marked text; the selected text is
				inserted in its place when inserting user-defined tags.</para></listitem>
				<listitem><para><userinput>%S</userinput>: will be replaced by the source file's name without file extension.</para></listitem>
			</itemizedlist>

			<para>To show you how this works let's say for example that we have a user-defined tag,
			which contains the value <userinput>\bfseries{%M}%C</userinput>, and I have a selection of text
			highlighted in my document that we want to turn into bold text. So, we highlight the
			phrase <userinput>I love Fridays</userinput>, apply our user-defined tag by pressing
			<keycombo>&Ctrl;&Shift;<keycap>1</keycap></keycombo>, and we get the text
			<userinput>\bfseries{I love Fridays}</userinput>, with the cursor 
			placed at the end of the text.</para>

		</sect2>

	</sect1>

</chapter>

<chapter id="build">

	<title>The Build Tools</title>

	<sect1 id="build_sect">

		<title>Compiling, converting and viewing</title>

		<para>To view the result of your work, you first need to compile the source. All the build 
		tools are grouped closely together in the
		<menuchoice><guimenu>Build</guimenu><guisubmenu>Compile</guisubmenu></menuchoice>,
		<menuchoice><guimenu>Build</guimenu><guisubmenu>Convert</guisubmenu></menuchoice>,
		and <menuchoice><guimenu>Build</guimenu><guisubmenu>View</guisubmenu></menuchoice> 
		menus.</para>

		<para>To compile your source code for screen viewers like &kdvi;, &kghostview;, &kpdf; or
		further conversion, you can use the shortcut <keycombo>&Alt;<keycap>2</keycap></keycombo>.
		Then you can view the DVI file using your default viewer with 
		<keycombo>&Alt;<keycap>3</keycap></keycombo>, convert 
		the DVI to a PS file with <keycombo>&Alt;<keycap>4</keycap></keycombo>, 
		and view the PS file with <keycombo>&Alt;<keycap>5</keycap></keycombo>.</para>

		<sect2>

		<title>&bibtex;</title>

			<para>If you are using <ulink url="http://www.ecst.csuchico.edu/~jacobsd/bib/formats/bibtex.html">&bibtex;</ulink> 
			for your bibliography entries, you usually have to follow a special compiling scheme.
      This means calling &latex; and then &bibtex; and then &latex; twice again. Fortunately &kile; is clever enough to
      detect automatically if it is necessary to call additional tools like &bibtex;, &makeidx; and &asymptote;.
      This logic is by default turned on and can be changed in <menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure
      Kile...</guisubmenu><guisubmenu>Tools</guisubmenu><guilabel>Build</guilabel></menuchoice> in the <guilabel>General</guilabel> tab in the &latex; and &pdflatex; tools.
      </para>

		</sect2>

		<sect2>

			<title>&makeidx;</title>

			<para>If you are using the <ulink url="http://ipagwww.med.yale.edu/latex/makeindex.pdf">&makeidx;</ulink> 
			package to make a final, alphabetical index for your document, you have also to follow a certain
			compilation pattern or let &kile; do this for you in the same way as with &bibtex; files.</para>

		</sect2>

		<sect2>

			<title>MetaPost and Asymptote</title>

			<para>If you want to compile your document with <application>MetaPost</application> or <application>Asymptote</application>, picture drawing programs, you can do it with 
			<menuchoice><guimenu>Build</guimenu><guisubmenu>Compile</guisubmenu><guimenuitem>Metapost</guimenuitem></menuchoice>.
			or <menuchoice><guimenu>Build</guimenu><guisubmenu>Other</guisubmenu><guimenuitem>Asymptote</guimenuitem></menuchoice>.</para>

		</sect2>
		
		<sect2>

			<title>&pdflatex;</title>

			<para>There is also another way to compile your document, if you want a PDF: you can run 
			&pdflatex;, that will compile the source directly into a PDF file, with 
			<keycombo>&Alt;<keycap>6</keycap></keycombo>: you can then view the compiled 
			file pressing <keycombo>&Alt;<keycap>7</keycap></keycombo>.</para>

			<para>Alternatively, you can convert a PS into a PDF with 
			<keycombo>&Alt;<keycap>8</keycap></keycombo>, or directly a 
			DVI into a PDF with <keycombo>&Alt;<keycap>9</keycap></keycombo>.</para>

			<para>Using &pdflatex; instead of &latex; may be just a matter of simplicity or habit,
			but sometimes the behavior of the two program can differ.</para>
			
		</sect2>

		<sect2>

			<title>&latex; to Web</title>

			<para>Finally, you may want to publish your work on the web and not just on paper. You may
			then use the <application>latex2html</application> program, that can be called from &kile;'s menu
			<menuchoice><guimenu>Build</guimenu><guisubmenu>Convert</guisubmenu><guimenuitem>LaTeX
			to Web</guimenuitem></menuchoice>. The result will be placed in a subfolder of the work folder,
			and you will be able to see the result of the conversion choosing the menu item 
			<menuchoice><guimenu>Build</guimenu><guisubmenu>View</guisubmenu><guimenuitem>View
			HTML</guimenuitem></menuchoice>.</para>

		</sect2>

		<sect2 id="build_cl">

			<title>Passing Command-Line Parameters</title>

			<para>If you want to pass some specific command-line parameters to the compile, convert 
			or view tools, you can configure their call in <menuchoice><guimenu>Settings</guimenu>
			<guisubmenu>Configure Kile...</guisubmenu><guisubmenu>Tools</guisubmenu><guilabel>Build</guilabel></menuchoice>.</para>

		</sect2>
				
	</sect1>

	<sect1 id="build_preview">
		<title>Quick Preview</title>

		<para>You will always need some time to view the result, when working with &latex;. 
		&latex; has to compile the source and the viewer has to be called. This can be 
		annoying if you only changed some letters in an equation difficult to typeset.
		&kile; offers a <emphasis>Quick Preview</emphasis> mode, where you can compile 
		only a part of a document and save a lot of time. It supports four different modes,
		which can be combined with seven configurations.</para> 
		
		<screenshot>
			<screeninfo>Quick Preview</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="quickpreview.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Quick Preview</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<para>All settings must be done in 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Tools</guimenuitem><guilabel>Preview</guilabel></menuchoice>.</para>

		<screenshot>
			<screeninfo>Quick Preview Configuration</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="config-quickpreview.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Quick Preview Configuration</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<sect2 id="build_qp_selection">
		
			<title>Selection Mode</title>

			<para>The user has to select a part of the document. Menu entry <menuchoice><guimenu>Build</guimenu><guisubmenu>QuickPreview</guisubmenu><guimenuitem>Selection</guimenuitem></menuchoice>
			or the keyboard shortcut <keycombo action="simul">&Ctrl;&Alt;<keycap>P</keycap></keycombo>,<keycap>S</keycap>
			will start the selected programs. &kile; takes the preamble of the original text, so that 
			all packages and user defined commands are included. The user can choose one 
			of seven predefined configurations:</para>

			<itemizedlist>
			<listitem><para><application>LaTeX+DVI (embedded viewer)</application></para></listitem>
			<listitem><para><application>LaTeX+DVI (KDVI)</application></para></listitem>
			<listitem><para><application>LaTeX+PS (embedded viewer)</application></para></listitem>
			<listitem><para><application>LaTeX+PS (KGhostView)</application></para></listitem>
			<listitem><para><application>PDFLaTeX+PDF (embedded viewer)</application></para></listitem>
			<listitem><para><application>PDFLaTeX+PDF (KGhostView)</application></para></listitem>
			<listitem><para><application>PDFLaTeX+PDF (KPDF)</application></para></listitem>
			</itemizedlist>

			<para>This should be sufficient for all situations for which a quick preview is needed.</para>

		</sect2>
		
		<sect2 id="build_qp_environment">
		
			<title>Environment Mode</title>
			
			<para>Very often you want to preview the current environment, and especially mathematic
			environments, which sometimes may be difficult to write. &kile; offers a very fast way 
			to do this. No selection is needed, only choose
			<menuchoice><guimenu>Build</guimenu><guisubmenu>QuickPreview</guisubmenu><guimenuitem>Environment</guimenuitem></menuchoice>
			or the keyboard shortcut <keycombo action="simul">&Ctrl;&Alt;<keycap>P</keycap></keycombo>,<keycap>E</keycap>
			 and the current environment will be compiled and shown.</para>

		</sect2>
		
		<sect2 id="build_qp_subdocument">
		
			<title>Subdocument Mode</title>
			
			<para>If you have a large project with a lot of documents, compiling the whole 
			project is not a great idea, if you have made changes only in one single document. 
			&kile; is able to compile and show a preview of the current subdocument. It 
			takes the preamble from the master document and only compiles the current part
			when you choose <menuchoice><guimenu>Build</guimenu><guisubmenu>QuickPreview</guisubmenu><guimenuitem>Subdocument</guimenuitem></menuchoice>
			or the keyboard shortcut <keycombo action="simul">&Ctrl;&Alt;<keycap>P</keycap></keycombo>,<keycap>D</keycap>.</para> 
			
		</sect2>

		<sect2 id="build_qp_mathgroup">
		
			<title>Mathgroup Mode</title>
			
			<para>The mathgroup preview mode allows you to preview the mathgroup you are currently editing. &kile; 
			takes the preamble from the master document and only compiles the mathgroup the cursor is currently in
			when you choose <menuchoice><guimenu>Build</guimenu><guisubmenu>QuickPreview</guisubmenu><guimenuitem>Mathgroup</guimenuitem></menuchoice>
			or the keyboard shortcut <keycombo action="simul">&Ctrl;&Alt;<keycap>P</keycap></keycombo>,<keycap>M</keycap>.</para> 
			
		</sect2>

		<sect2 id="qp_bottombar">
		
			<title>Quick Preview in Bottom Bar</title>
			
			<para>Instead of showing the preview in a new document &kile; can also be configured to use the bottom bar for preview
			compilations. You can activate this feature in the quick preview configuration panel.</para>	
			
		</sect2>

	</sect1>	
		
	<sect1 id="build_graphics">

		<title>Graphic File Formats</title>

		<sect2 id="build_graphics_latex">
		
		<title>&latex; and &pdflatex;</title>
		
		<para>&pdflatex;, when used with <userinput>graphics</userinput> or
		<userinput>graphicx</userinput> packages, can compile correctly PNG and JPG files into
		DVI or PDF, but is not able to handle EPS files. Conversely, the process of compiling 
		with &latex; to DVI and converting to PS and eventually PDF does support EPS, but does 
		not support PNG and JPG.</para> 
		
		<para>A lot of users want to create PDF documents, but also want to use of the excellent
		<application>Pstricks</application> package to create &postscript; graphics, or they want 
		to use the &postscript; output of mathematical and scientific software like 
		<application>Mathematica</application>, <application>Maple</application> or <application>MuPAD</application>. 
		These &latex; users have to compile first in &postscript;, even if they want to create 
		PDF documents, because these programs produce &postscript; code which cannot be managed 
		by &pdflatex;. However, it is not so hard as it may sound, because &kile; will help.</para>
		
		</sect2>
		
		<sect2 id="build_graphics_conversion">
		
		<title>Graphics Conversion</title>

		<para>To overcome this frustrating loop, in case you want to include both &postscript; code and PNG or JPG files, 
		you have a number of workarounds:</para>

		<itemizedlist>
			<listitem><para>If you need a file in PS format, but have JPG or PNG graphics, you can also
			simply use &pdflatex; with DVI output first, and then run <application>dvips</application> 
			to create the PS file. You see that &pdflatex; is a very good choice, if your source contains
			no &postscript; code at all.</para></listitem>
			
			<listitem><para>You can convert EPS files to PNG or other formats with utilities as the
			<ulink url="http://www.gimp.org/"><application>Gimp</application></ulink> or
			<ulink url="http://www.imagemagick.org/">&imagemagick;</ulink> 
			and use &pdflatex;.</para></listitem>
			
			<listitem><para><anchor id="build_graphics_epstopdf"></anchor>A preferred way 
			is to convert EPS graphics to PDF graphics with 
			<command>epstopdf</command>, which comes with every &tex; distribution
			distribution and then use &pdflatex;. It produces high quality graphics, 
			and you can even control the result with some of the following options: 
			 
<programlisting>
	-dAutoFilterColorImages=false
	-dAutoFilterGrayImages=false
	-sColorImageFilter=FlateEncode
	-sGrayImageFilter=FlateEncode
	-dPDFSETTINGS=/prepress
	-dUseFlateCompression=true
</programlisting>
			</para>
			
			<para>Even better: if your system allows <userinput>shell-escape</userinput>, conversion
			can be done on the fly. All you have to do is to include the <application>epstopdf</application> package,
			which is part of all &tex; distributions, with command <userinput>\usepackage{epstopdf}</userinput>.
			Assuming that your code is
			
<programlisting>
	\includegraphics[width=5cm]{test.eps}
</programlisting>
			
			When you call &pdflatex; with option <option>--shell-escape</option>,
			graphics <filename>test.eps</filename> is automatically converted into <filename>test.pdf</filename>.</para>
			
			<para>This conversion will take place each time you run &pdflatex;. 
			If your graphics command is given implicitly:
			
<programlisting>
	\includegraphics[width=5cm]{test}
</programlisting>
			
			<application>epstopdf</application> checks whether <filename>test.pdf</filename> is already 
			available, so that conversion step can be skipped.</para></listitem>

			<listitem><para>You can convert the other way around, and use &latex; and PS-PDF conversion.
			This is not always a good idea, since EPS encapsulation of JPG or PNG can yield larger 
			files, that in turn yield unnecessarily large documents. This is however <emphasis>highly</emphasis> 
			dependent on the graphic utility that you use, since EPS can encapsulate other graphics, 
			but not all applications support this perfectly. Some might actually try to build your JPG image 
			with vectors and various scripting, which will result in gigantic files. Conversion of
			all graphics formats to EPS can be done by
			<ulink url="http://www.imagemagick.org/">&imagemagick;</ulink>. 
			Another simple program that does this process correctly is 
			<ulink url="http://www.tex.uniyar.ac.ru/win32/tools/jpg2ps/"><application>jpg2ps</application></ulink>.
			</para></listitem>
			
			<listitem><para>You can also use an automatic conversion. All graphic files are 
			converted on the fly to EPS, and inserted into the PS document. This is a comfortable 
			way, but you have to set up your system properly. This is discussed in the section 
			<link linkend="build_epsgraphics">EPS Graphics</link>.</para></listitem>
			
		</itemizedlist>

		</sect2>
		
		<sect2 id="build_graphics_type">
		
		<title>Use the right File for the right Graphic</title>

	 	<itemizedlist>
			<listitem><para>EPS is sort of a graphic vector scripting language, describing
			all the lines and dots the graph is made of; it looks good even when magnified beyond its
			default size, and suits best diagrams and vectorial graphic natively produced in EPS, 
			which look very clear and sharp while maintaining a very small byte size.</para></listitem>
			<listitem><para>PNG (or the deprecated GIF) is a <emphasis>non-lossy</emphasis> file format, 
			with good compression and quality. It is very good for diagrams, scans of drawings, 
			or anything whose sharpness you do want to retain. It is sometimes overkill 
			when used for photos.</para></listitem>
			<listitem><para>JPG is a <emphasis>lossy</emphasis> format, that compresses files better than PNG 
			at the price of some loss in the picture detail. This is usually irrelevant for photos, 
			but may cause bad quality for diagrams, drawings, and may make some thin lines disappear outright; 
			in those cases use EPS or PNG.</para></listitem>
		</itemizedlist>

		<para>But always remember: garbage in, garbage out! No conversion will make a bad picture good.</para>

		</sect2>
		
	</sect1>

	<sect1 id="build_epsgraphics">
		
		<title>EPS Graphics</title>
		
		<para>EPS graphics files are the traditional way to insert graphics files into
		&latex; documents. As mailing lists are full with questions concerning
		EPS graphics, we will discuss some important aspects and
		demonstrate how &kile; supports them.</para>
		
		<sect2 id="build_graphics_eps">
		
		<title>&latex; and EPS Graphics</title>

		<para>If you decided to use the traditional &latex; to produce
		PS or PDF output, you will probably run into some problems
		with graphics. You have to use EPS graphics (Encapsulated &postscript;), 
		no JPEG or PNG files. This should be no problem, as there are a lot of 
		<link linkend="build_graphics_conversion">converters</link> like 
		<command>convert</command> from the excellent 
		<ulink url="http://www.imagemagick.org/">&imagemagick;</ulink> 
		package. But, it needs some time of course.</para> 
		
		<para>The EPS files are used by both &latex; and the DVI-PS converter:</para>
		
		<itemizedlist>
		<listitem><para>&latex; scans the EPS file for the bounding box 
		line, which tells &latex; how much space to reserve for the 
		graphics.</para></listitem>
		
		<listitem><para>The DVI-PS converter then reads the EPS file and 
		inserts the graphics in the PS file.</para></listitem>
		</itemizedlist>

		<para>This has some implications:</para>
 
		<itemizedlist>
		<listitem><para>&latex; never reads the EPS file if the bounding-box 
		parameters are specified in the graphics-insertion command.</para></listitem>

		<listitem><para>Since &latex; cannot read non-ASCII files, 
		it cannot read the bounding-box information from compressed or non-EPS 
		graphics files.</para></listitem>
		
		<listitem><para>The EPS graphics are not included in the DVI file. Since the
		EPS files must be present when the DVI file is converted to
		PS, the EPS files must accompany DVI files whenever they are 
		moved.</para></listitem>
		</itemizedlist>
		
		<para>Now you can call &latex;, and a DVI-PS converter like <application>dvips</application>
		to create your &postscript; document. If your goal is a PDF document, you should run
		<command>dvips</command> with option <option>-Ppdf</option> and then call
		<command>ps2pdf</command>. You will find a lot of documents describing this solution.</para>
	
		</sect2>
	
		<sect2 id="build_graphics_epskile">
		
		<title>The &postscript; Way of &kile;</title>
		
		<para>&kile; helps you to get the bounding-box information. If you have installed 
		<ulink url="http://www.imagemagick.org/">&imagemagick;</ulink> 
		package, &kile; will extract this information from the EPS file and insert it as an
		option. This is done automatically when you select the graphics file. 
		There are two advantages to proceed like this:</para>

		<itemizedlist>
		<listitem><para>The information is already scanned in the dialog, and 
		need not to be done by &latex; later on.</para></listitem>
		<listitem><para>Even more important is that the width and height of the picture 
		can be calculated, when the its resolution is known. This information will be shown 
		near the top of the dialog, and may serve as a clue when you want to scale the 
		graphics.</para></listitem>
		<listitem><para>&kile; can also support zipped or gzipped EPS files,
		which are much smaller than uncompressed EPS files. But, this feature can only be used 
		with a special system setup and a change of your local graphics configuration, 
		like it is described in the <link linkend="build_graphics_bitmap">Bitmap Graphics</link> 
		section.</para></listitem> 
		</itemizedlist>
	<!-- FIXME I don't understand the following sentence, tbraun	
		<para> The <emphasis>&postscript; Way of &kile;</emphasis> can be turned off or on in
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>LaTeX</guimenuitem><guilabel>General</guilabel></menuchoice>.</para>
		-->
	</sect2>
		
	<sect2 id="build_graphics_bitmap">
		
		<title>The &postscript; Way and Bitmap Graphics</title>
		
		<para>If your systems allows <userinput>shell-escape</userinput>, &kile;
		also supports an easy way to include bitmap graphics, if you set up your &tex;
		system properly. There is no need to convert JPEG or PNG graphics, 
		this can be done automatically when the DVI file is converted to PS.</para>
		
		<para>&latex; needs some information about the file suffixes. The package 
		<userinput>graphicx</userinput> looks for a file <filename>graphics.cfg</filename>, 
		which must be somewhere in your search path for &latex; documents. Search for 
		entries like:</para>

<programlisting>
   \DeclareGraphicsRule{.pz}{eps}{.bb}{}%
   \DeclareGraphicsRule{.eps.Z}{eps}{.eps.bb}{}%
   \DeclareGraphicsRule{.ps.Z}{eps}{.ps.bb}{}%
   \DeclareGraphicsRule{.ps.gz}{eps}{.ps.bb}{}%
   \DeclareGraphicsRule{.eps.gz}{eps}{.eps.bb}{}%
</programlisting>

		<para>and replace these lines with:</para>
		
<programlisting>
   \DeclareGraphicsRule{.pz}{eps}{.bb}{}%
   \DeclareGraphicsRule{.eps.Z}{eps}{.eps.bb}{}%
   \DeclareGraphicsRule{.ps.Z}{eps}{.ps.bb}{}%
   \DeclareGraphicsRule{.ps.gz}{eps}{.ps.bb}{}%
   % changed or new graphic rules
   \DeclareGraphicsRule{.eps.zip}{eps}{.eps.bb}{`unzip -p #1}%   zipped EPS 
   \DeclareGraphicsRule{.eps.gz}{eps}{.eps.bb}{`gunzip -c #1}%   gzipped EPS
   \DeclareGraphicsRule{.jpg}{eps}{}{`convert #1 eps:-}%         JPEG
   \DeclareGraphicsRule{.gif}{eps}{.bb}{`convert #1 eps:-}%      GIF
   \DeclareGraphicsRule{.png}{eps}{.bb}{`convert #1 eps:-}%      PNG
   \DeclareGraphicsRule{.tif}{eps}{.bb}{`convert #1 eps:-}%      TIFF
   \DeclareGraphicsRule{.pdf}{eps}{.bb}{`convert #1 eps:-}%      PDF-graphics
</programlisting>

		<para>You will find this file, for example in Debian, at 
		<filename>/etc/texmf/latex/graphics.cfg</filename>. The best way to proceed is to copy this
		file to your local texpath and then change this file. See the yours &tex; distribution manual
		to learn how to get a list of your &tex; folders.</para>
		
		<para>With this configuration file you are able to insert bitmap graphics and 
		zipped or gzipped EPS files in &latex;. The command for conversion 
		is given by <command>dvips</command>. When you look 
		at the conversion command you will see that no extra file is created. 
		The result of the conversion process is directly piped into the PS file. 
		The only thing &latex; must know is the size of the graphics, and
		therefore we need the bounding box, which is provided by &kile;.</para>
		
		<para>Some say that this way is insecure; you have to decide on how to work. 
		In any case, you need no bounding box, as &kile; will extract this information 
		from all types of graphics.</para>

		</sect2>
		
		<sect2 id="build_graphics_pdflatex">
		
		<title>&pdflatex; and EPS Graphics</title>

		<para>As already stated, &pdflatex; is not able to handle EPS graphic files, 
		but converters like <link linkend="build_graphics_epstopdf">epstopdf</link> 
		will help. The best way is to include package <filename>epstopdf</filename>, 
		which must follow the <userinput>graphicx</userinput> package.</para>
		
<programlisting>
   \usepackage[pdftex]{graphicx}
   \usepackage{epstopdf}
</programlisting>

		<para>Now you can already include EPS graphics, if you run <command>pdflatex</command>
		with option <option>--shell-escape</option>, but we can make it even better
		and also handle zipped or gzipped EPS files. Again we have to change 
		the graphics configuration file <filename>graphics.cfg</filename> like above.
		This time we search for:</para>

<programlisting>
   % pdfTeX is running in pdf mode
   \ExecuteOptions{pdftex}%
</programlisting>

		<para>and simply add some lines.</para>
		
<programlisting>
   % pdfTeX is running in pdf mode
   \ExecuteOptions{pdftex}%
   \AtEndOfPackage{%
      \g@addto@macro\Gin@extensions{.eps.gz,.eps.zip}%
      \@namedef{Gin@rule@.eps.gz}#1{{pdf}{.pdf}{`gunzip -c #1 | epstopdf -f >\Gin@base.pdf}}%
      \@namedef{Gin@rule@.eps.zip}#1{{pdf}{.pdf}{`unzip -p #1 | epstopdf -f >\Gin@base.pdf}}%
   }%
</programlisting>
		
		<para>With these lines, &pdflatex; is able to handle EPS files,
		and hopefully there should be no more issues concerning graphics.</para>
	
	</sect2>
		
	</sect1>
 
	<sect1 id="build_master">

		<title>Master Document</title>

		<para>Defining your document as a master allows you to work with separated files,
		which gives you a parent document (or Master document), and child documents that
		make up a complete work. After having defined your Master document, with the
		corresponding command in the <guimenu>Settings</guimenu>
		menu, all the commands of the <guimenu>Tools</guimenu>
		menu will apply only to this document, even when you are working on the child
		documents. You can even close the Master document.</para>
	</sect1>

	<sect1 id="build_errorhandling">

		<title>Error Handling</title>

		<para>After you have compiled something, &kile; takes a look at the error messages 
		that were generated. If there are any errors or warnings, they will be briefly reported 
		in the <guilabel>Log and Messages</guilabel> window. One can take a closer look at the
		messages by selecting <menuchoice><guimenu>Build</guimenu><guimenuitem>View Log File</guimenuitem></menuchoice>,
		or by using the keyboard shortcut <keycombo>&Alt;<keycap>0</keycap></keycombo>.
		The generated log is then displayed in the <guilabel>Log and Messages</guilabel> view; errors and warnings are highlighted.</para>

		<screenshot>
			<screeninfo>Viewing the log</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_compile_error.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Viewing the log</phrase>
			</textobject>
			<caption><para>Viewing the log</para></caption>
			</mediaobject>
		</screenshot>

		<para>You can easily jump from one message in the log file to another by using the
		<menuchoice><guimenu>Build</guimenu><guimenuitem>Next / Previous
		LaTeX Error / Warning</guimenuitem></menuchoice> menu items, or by using
		the corresponding toolbar buttons.</para>

		<para>To jump to the line in the &latex; source where the error or warning occurred,
		click on the error or warning in the <guilabel>Log and Messages</guilabel> view.
		&kile; will take you automatically to the offending line.</para>

	</sect1>

	<sect1 id="build_watch">

			<title>The Watch File Mode</title>

			<para>When you launch the <guibutton>Quickbuild</guibutton> command, a viewer of
			some sort will normally be called after the compilation. If you are not using an embedded 
			viewer, a new window will be open every time.</para>

			<para>If you are adjusting the look of your document, you might launch
			<guibutton>Quickbuild</guibutton> very often, and have many viewer windows open on
			your desktop; to avoid this confusion, you can activate the <guibutton>Watch file</guibutton>
			mode, that will prevent <guibutton>Quickbuild</guibutton> from launching a viewer.</para>
			
			<para>Presently, &kdvi; supports continuous updating of the viewed DVI file, but
			&kghostview; is not as perfect: to update the document after compiling, you will have
			to change page, and the number of pages will not be changed in &kghostview;'s visualization.</para>
			
			<para>This mode is of course useless with the embedded viewers, as you have to close them
			anyway to get back to editing the document and recompiling.</para>

	</sect1>

</chapter>

<chapter id="navigating">

	<title>Navigating the &latex; Source</title>

	<sect1 id="navigating_struct">

		<title>Using the Structure View</title>

		<para>The <guilabel>Structure</guilabel> view shows the hierarchy of the document
		being created in &kile;, and allows you to quickly navigate it, showing its segmentation. 
		To navigate around your document, all you need to do is to left click on any label, chapter, 
		section, subsection, etc., and you will be taken to the beginning of
		the corresponding area.</para>
		
		<para>If you included a separate &latex; file in your source using
		the <userinput>\input</userinput> or <userinput>\include</userinput> tags, these files will
		be referred to in the <guilabel>Structure</guilabel> view; double-clicking on their names in
		it will make &kile; bring up the included file in the editor window.</para>
		
		<para>The hierarchy tree has also a separate branch for labels used in the text.</para>

		<screenshot>
			<screeninfo>Using the Structure View</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_structview_label.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Using the Structure View</phrase>
			</textobject>
			<caption><para>Using the Structure View</para></caption>
			</mediaobject>
		</screenshot>

		<sect2 id="navigating_update">

			<title>Updating the Structure View</title>

			<para>To update your structure view you can either go to 
			<menuchoice><guimenu>Edit</guimenu><guimenuitem>Refresh 
			Structure</guimenuitem></menuchoice>, hit <keycombo><keycap>F12</keycap></keycombo>, or you can save your document,
			which will make &kile; update its <guilabel>Structure</guilabel> view.</para>

		</sect2>

	</sect1>

	<sect1 id="navigating_bookmarks">

		<title>Bookmarks</title>

		<para>Bookmarks are your reference to a segment of text or a line inside the &kile;
		environment. To use a bookmark, select a specific line of your document
		you would like to return to, then press <keycombo>&Ctrl;
		<keycap>B</keycap></keycombo>, and &kile; will add a bookmark to this line. 
		Alternatively, you can also set a bookmark by highlighting a line and choosing 
		the menu labeled <menuchoice><guimenu>Bookmark</guimenu><guimenuitem>Toggle 
		Bookmark</guimenuitem></menuchoice>.</para>

		<para>To remove all your bookmarks, select <menuchoice><guimenu>Bookmarks</guimenu>
		<guimenuitem>Clear Bookmarks</guimenuitem></menuchoice>.</para>

    <para>Please note that currently the bookmarks are not saved after exiting &kile;.</para>

	</sect1>

</chapter>

<chapter id="projects">

	<title>Projects</title>

	<sect1 id="projects_working">
	
		<title>Working with Projects</title>

		<para>In &kile; you can create and work with <emphasis>projects</emphasis>. A project is a 
		group of &latex;, graphic, &bibtex; or other files that contain all the information that is used to build 
		your complete document. A typical project would be a document consisting of several chapters, 
		written in different <literal role="extension">.tex</literal> files; all of them could be included in
		a project, to make the whole document easier to manage. The specifications of the project are stored in a special file, 
		with extension <literal role="extension">.kilepr</literal>.</para>

		<para>A Project adds the following functionalities:</para>

		<itemizedlist>
			<listitem><para>You need not set a master document, &kile; does this automatically.</para></listitem>
			<listitem><para>Project files can easily be archived together by going to <menuchoice><guimenu>Build</guimenu><guisubmenu>Other</guisubmenu><guimenuitem>Archive</guimenuitem></menuchoice></para></listitem>
			<listitem><para>The <guilabel>Files and Project</guilabel> view shows which files are included
			in the project.</para></listitem>
			<listitem><para>After opening a project, any file that was previously opened will be
			restored with the original encoding and highlightning.</para></listitem>
      <listitem><para> Code completion works across all project files.</para></listitem> 
      <listitem><para> Reference completion works across all project files.</para></listitem> 
      <listitem><para> Citation completion works across all project files.</para></listitem> 
      <listitem><para> Search in all project files.</para></listitem> 
      <listitem><para> Specify custom quickbuild and &makeidx; command.</para></listitem>
		</itemizedlist>

	</sect1>

	<sect1 id="projects_creating">

		<title>Creating a Project</title>

		<para>To create a project, select <menuchoice><guimenu>Project</guimenu>
		<guimenuitem>New Project...</guimenuitem></menuchoice>. You will be
		asked to give the following information to create your project:</para>
		<itemizedlist>
			<listitem><para>Title of your project.</para></listitem>
			<listitem><para>Name of the project file with <literal role="extension">.kilepr</literal> extension.</para></listitem>
			<listitem><para>Filename.</para></listitem>
			<listitem><para>Type of file creating: Empty Document, Article, Book, Letter, Report, ....</para></listitem>
		</itemizedlist>

		<para>When you fill out the <guilabel>filename</guilabel> box, you have to include a relative 
		path from where the <literal role="extension">.kilepr</literal> project file is stored to the file.</para>

	</sect1>

	<sect1 id="projects_view">

		<title>The File and Project View</title>

		<para>The <guilabel>File and Project</guilabel> view is a button of the sidebar menu. 
		From this view, you can see the structure of your project, its files, 
		and the name of the <literal role="extension">.kilepr</literal> file that stores the project information. 
		Adding, removing, or changing options in your project is done via
		the <guilabel>File and Projects</guilabel> view.</para>

		<screenshot>
			<screeninfo>The File and Project View</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_projectview.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>The File and Project View</phrase>
			</textobject>
			<caption><para>The File and Project View</para></caption>
			</mediaobject>
		</screenshot>

	</sect1>

	<sect1 id="projects_adding">

		<title>Adding and Removing Files</title>

		<para>To add a file to your project, open any &tex; file, right click on its name in the
		<guilabel>Files and Project</guilabel> view, and select <guilabel>Add to
		Project</guilabel>. If you have multiple projects open, a dialog box will ask
		you which project the file has to be added to.</para>

		<para>If you have multiple files to be added to a project, you can select the
		project from the <guilabel>Files and Project</guilabel> view and right-click then select
		<guilabel>Add Files</guilabel>; you will then be able to select your files in a dialog box.</para>
		
		<para>You can also right-click on the project's name in the <guilabel>Files and 
		Project</guilabel> view, and select <guilabel>Add Files...</guilabel> to bring
		up a file selection dialog.</para>

		<screenshot>
			<screeninfo>Adding a file to a project</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="snap_projectview_add.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Adding a file to a project</phrase>
			</textobject>
			<caption><para>Adding a file to a project</para></caption>
			</mediaobject>
		</screenshot>

		<para>To remove a file from a project, right-click on it and select <guilabel>Remove File</guilabel>.
		This does <emphasis>not</emphasis> delete your file (and also does not close it), but only removes it from the list 
		of files contained in the <literal role="extension">.kilepr</literal> extension.</para>

	</sect1>

	<sect1 id="projects_options">

		<title>Project Options</title>

		<para>&kile; has a few options related to your project that can be set. To change them,
		right-click on the title of your project and select <guilabel>Project Options</guilabel>,
		and you will have the option of changing:</para>

		<itemizedlist>
			<listitem><para>The title of your project.</para></listitem>
 			<listitem><para>The Master document.</para></listitem>
 			<listitem><para>The Quickbuild command.</para></listitem>
 			<listitem><para>The &makeidx; options.</para></listitem>
		</itemizedlist>

		<sect2 id="projects_archive">

			<title>Archiving your Project</title>

			<para>&kile; allows you to easily backup your project by storing all its files 
			into a single archive (often known as <emphasis>tarball</emphasis>). To archive your project 
			right-click on its name in the <guilabel>Files and Project</guilabel> view, or select 
			<menuchoice><guimenu>Project</guimenu><guimenuitem>Archive</guimenuitem></menuchoice>.</para>

			<para>By default, all files in a project are added to the archive. If you do not want to include 
			a certain file in the archive, right-click on it in the <guilabel>Files and Project</guilabel> 
			view, and uncheck the <guilabel>Include in Archive</guilabel> option.</para>

			<para>Archive commands are simple shell commands that are executed from the project
			folder (where the <literal role="extension">.kilepr</literal> file is located).</para>

		</sect2>

<!-- FIXME not working in kile, tbraun 11/3/2007
		<sect2 id="projects_ext">

			<title>Extensions for Non-Source Files</title>

			<para>Non-source files are files such as pictures, PDF or &postscript; files, etc. that are 
			to be included in the project, but are not source files with the extension <literal role="extension">.tex</literal>. You have 
			the option to use your own regular expressions to match non-source files.</para>
		</sect2>
-->

	</sect1>

	<sect1 id="projects_closing">

		<title>Closing a Project</title>

		<para>To close a project, select the <guilabel>Files and Project</guilabel> view from
		the vertical toolbar, right click on your project title, and then select <guimenuitem>
		Close</guimenuitem>. This will close your project, all the files associated with your project,
		and will also add the name of the project you just closed to <guisubmenu>Open Recent
		Project...</guisubmenu> in the <guimenu>Project</guimenu> menu.</para>

	</sect1>

</chapter>

<chapter id="lang">

	<title>Document Encoding</title>

	<para>The &kile; editor allows you to read, convert and set the text to the encoding 
	your document needs. This allows you to use non-standard letters and symbols; 
	you can use, for example, accented characters for Italian or French.
	Selecting the encoding for your document can be done in three ways:</para>

	<itemizedlist>
		<listitem><para>One way to set the encoding is to use the <guilabel>Set encoding</guilabel> combo
		box, located at the bottom of the <guilabel>Open File</guilabel> sidebar view.</para></listitem>
		<listitem><para>Another way is using the submenu 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure
		Kile...</guisubmenu><guimenuitem>Editor</guimenuitem></menuchoice>,
		where you can set the default character encoding for all files.</para>
		<screenshot>
			<screeninfo>Set the default character encoding</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="config-encoding.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Set the default character encoding</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		</listitem>
		<listitem><para>A third way to set the encoding for a document is to set the option
		when you use the wizard to create a new document.</para></listitem>
	</itemizedlist>

	<para>&latex; itself understands only ASCII, a very limited set of characters, so you could not use
	accented or special letters directly. To use accented letters, a special syntax was created: 
	such as for example <userinput>\"e</userinput> for <computeroutput>ë</computeroutput>. 
	There is a package to help you with this, called <application>inputenc</application>, and is included 
	in the preamble using <userinput>\usepackage[latin1]{inputenc}</userinput>, where the optional argument 
	is the encoding you would like to use (nowadays in most cases <userinput>utf8x</userinput>). This tells &latex;
	to translate all of the <userinput>ë</userinput>'s you wrote to <userinput>\"e</userinput>'s before
	compiling. Please refer to the <application>inputenc</application> documents directly for more
	information on <application>inputenc</application>. Last but not least: remember to make sure that 
	your file is <emphasis>actually</emphasis> encoded in the same encoding you told 
	<application>inputenc</application>!</para>

	<screenshot>
		<screeninfo>Choosing the source file's encoding</screeninfo>
		<mediaobject>
		<imageobject>
		<imagedata fileref="snap_encoding.png" format="PNG" />
		</imageobject>
		<textobject>
		<phrase>Choosing the source file's encoding</phrase>
		</textobject>
		<caption><para>Choosing the source file's encoding</para></caption>
		</mediaobject>
	</screenshot>

	<para>This host of different character coding tables has been creating problems on 
	many applications: for example, you cannot write a course of Turkish in French without 
	losing one language's special characters. There is general agreement that, sooner or later, 
	everybody will switch to <ulink url="http://www.unicode.org">Unicode</ulink>. There
	are many implementations of Unicode, and <abbrev>UTF-8</abbrev> is the most
	successful in Linux; Windows&reg; relies instead on the more cumbersome and
	less flexible <abbrev>UCS-2</abbrev>. Some distributions, as RedHat, have already
	begun setting their default encoding to <abbrev>UTF-8</abbrev>, and therefore you
	may be very interested in using of the <userinput>utf8x</userinput> argument to the
	<userinput>inputenc</userinput> package.</para>

	<sect1 id="ucs">
	
		<title>The &ucs; Package</title>
		<para>If you don't have the &ucs; package installed, you can proceed as follows:</para>
		<itemizedlist>
		<listitem><para>Get the &ucs; package from the home page of 
		<ulink url="http://www.unruh.de/DniQ/latex/unicode/">Unicode support for 
		&latex;</ulink>, by Dominique Unruh from the University of Karlsruhe.</para></listitem>
		<listitem>
		<para>To install it, unpack the downloaded file and place it in a directory listed
		 in your $<envar>TEXINPUTS</envar> envirnoment variable. This can also be set inside kile.</para>
		</listitem>
		</itemizedlist>
		<screen><userinput>
		\usepackage{ucs}
		\usepackage[utf8x]{inputenc}</userinput></screen>
		
	</sect1>
	
	<sect1 id="cjk">
		
		<title>&cjk; Support</title>
		
		<para>Adding support for ideographic languages is quite tricky. However, once
		you are done with it, it will work quite well. Other than installing packages,
		there is some extra configuration work to do.</para>
		
		<tip><para>Your Linux distribution might already have a &cjk; (Chinese, Japanese,
		Korean) package ready for you, so you might be saved the hassle of manually
		installing everything. Do check before going forward!</para></tip>
		
		<para>There is the possibility of using the &ucs; package in order to write
		short snippets of &cjk; text, but that option is seriously limited as it does
		not handle, among other things, newlines. We will instead install the complete
		&cjk;-&latex; package and make it work for both &latex; and &pdflatex;. A lot
		of this material has been inspired by <ulink url="http://www.ece.uci.edu/~chou/">Pai
		H. Chou</ulink>'s <ulink url="http://www.ece.uci.edu/~chou/unicode-tex.html">page 
		about how to setup &pdflatex;</ulink>.</para>
		
		<orderedlist>
		
		<listitem><para>Download the <ulink 
		url="http://www.ctan.org/tex-archive/help/Catalogue/entries/cjk.html">&cjk;</ulink> 
		package. Copy its unpacked files to an appropriate subfolder of 
		$<envar>TEXMF</envar>, just like you did with the &ucs; package 
		before (see <xref linkend="ucs"/>). The files will be unpacked in a 
		<filename>CJK/X_Y.Z</filename> folder, it is not important that you 
		take them out, though it will probably be tidier for you to 
		maintain.</para></listitem>
		
		<listitem><para>Now you have to download a font that supports all the &cjk; characters 
		you need. You can choose any <literal role="extension">*.ttf</literal> file that
		covers them, but in this walkthrough we will use <ulink
		url="ftp://ftp.netscape.com/pub/communicator/extras/fonts/windows/Cyberbit.ZIP">Cyberbit</ulink>.
		Unzip the file and rename <filename>Cyberbit.ttf</filename> to 
		<filename>cyberbit.ttf</filename>, since uppercase might confuse your system.</para>
		<para>Place <filename>cyberbit.ttf</filename> in a folder together with
		<ulink url="http://delloye.free.fr/Unicode.sfd"><filename>Unicode.sfd</filename></ulink>,
		and generate the <literal role="extension">*.tfm</literal> and 
		<literal role="extension">*.enc</literal> files with the command 
		<userinput><command>$ ttf2tfm cyberbit.ttf -w cyberbit@Unicode@</command></userinput>. 
		For some reasons, sometimes this does not produce the hundreds 
		of files it should. Should that be your case, you can download both 
		<ulink url="http://www.ece.uci.edu/~chou/unicode/cyberbit-tfm.tgz"><literal
		role="extension">*.tfm</literal></ulink> and 
		<ulink url="http://www.ece.uci.edu/~chou/unicode/cyberbit-enc.tgz"><literal
		role="extension">*.enc</literal></ulink> files.</para>
		<para>Place the <literal role="extension">*.tfm</literal> files in an 
		appropriate folder, say <filename>$<envar>TEXMF</envar>/fonts/tfm/bitstream/cyberbit/</filename>;
		the <literal role="extension">*.enc</literal> files may be installed in
		<filename>$<envar>TEXMF</envar>/pdftex/enc/cyberbit/</filename>.</para></listitem>
		
		<listitem><para>Now we need a map file to connect the <literal
		role="extension">*.enc</literal> files to the font. Download <ulink
		url="http://delloye.free.fr/cyberbit.map"><filename>cyberbit.map</filename></ulink> 
				and install it in <filename>$<envar>TEXMF</envar>/pdftex/config/</filename>.</para></listitem>
		
		<listitem><para>Download another file, <ulink 
		url="http://delloye.free.fr/c70cyberbit.fd"><filename>c70cyberbit.fd</filename></ulink>,
		and place it in an appropriate folder. You may choose, for example, 
		<filename>$<envar>TEXMF</envar>/tex/misc/</filename>.</para></listitem>
		
		<listitem><para>The last file we have to generate is a &postscript; Type 1
		font, necessary to read DVI files generated with &latex;. Run the command
		<userinput><command>$ ttf2pfb cyberbit.ttf -o cyberbit.pfb</command></userinput>, and copy the
		resulting <filename>cyberbit.pfb</filename> in a folder like
		<filename>$<envar>TEXMF</envar>/fonts/type1/cyberbit/</filename>.</para></listitem>
		
		<listitem><para>Let's now place <filename>cyberbit.ttf</filename> among the fonts 
		where &latex; can find it. You could place it in a folder named 
		<filename>$<envar>TEXMF</envar>/fonts/truetype/</filename>.</para></listitem>
		
		<listitem><para>Check the configuration file you find at
		<filename>$<envar>TEXMF</envar>/web2c/texmf.cnf</filename>, and make sure that the 
		line mentioning <envar>TTFONTS</envar> is uncommented and points to 
		the folder where you saved <filename>cyberbit.ttf</filename>.</para></listitem>
		
		<listitem><para>To make it possible for &pdflatex; to use your &cjk; 
		fonts, it is necessary that you add a line in configuration file
		<filename>$<envar>TEXMF</envar>/pdftex/config/pdftex.cfg</filename>. Add 
		<userinput>map +cyberbit.map</userinput> in the file to complete the
		configuration for &pdflatex;.</para></listitem>
		
		<listitem><para>To configure &latex; so that you can produce DVI 
		files with &cjk; characters, you have to add a line in file 
		<filename>ttfonts.map</filename>. The file might be in a folder named 
		<filename>$<envar>TEXMF</envar>/ttf2pk/</filename>, but you will probably have to look 
		for it. Add the line <userinput>cyberbit@Unicode@ cyberbit.ttf</userinput>
		into it.</para></listitem>
		
		<listitem><para>Now, you only have to run <userinput><command>texhash</command></userinput> 
		and the system should be ready.</para></listitem>
		
		</orderedlist>
		
		<para>To test whether your configuration is correct, you can try to compile
		<ulink url="http://www.math.nus.edu.sg/aslaksen/cs/sample-utf8.tex">this test
		file</ulink>.</para>
		
		<sect2>
			<title>&cjk; Troubleshooting</title>
			
			<para>There are many things that can go wrong when setting &cjk; 
			support manually. If something seems not to work, the following 
			checklist might help you.</para>
			
			<itemizedlist>
			
			<listitem><para>Obviously, since you run &latex; as a user and
			not as root, you must <emphasis>allow</emphasis> ordinary users
			to access the new files. Make sure all folders and files are 
			accessible using the <command>chmod</command> command.</para></listitem>
			
			<listitem><para>If &latex; writes a DVI without problems, but you
			cannot view it, it is almost certainly because of some problems in the
			automatic generation of <literal role="extension">*.pk</literal> 
			fonts. They are supposed to be generated on the fly when viewing a
			DVI file, but this might fail for a number of reasons: double-check
			<filename>ttfonts.map</filename> for your custom line first. However,
			it might happen that your <command>ttf2pk</command> command, which 
			is usually invoked by the DVI viewer, has been compiled 
			<emphasis>without</emphasis> support for the 
			<application>kpathsea</application> libraries. If this is the case,
			<userinput><command>ttf2pk</command> <option>--version</option></userinput> 
			will make no mention of <application>kpathsea</application>. As support for 
			these libraries is necessary, you might have to find a new package, or 
			recompile <application>FreeType 1</application> by yourself.</para></listitem>
			
			</itemizedlist>
			
		</sect2>
			
		
		<sect2>
		
			<title>How do I input &cjk; in Unicode?</title>
			
			<para>There are a number of different input engines, and the choice can
			depend also on personal preference. The author uses <ulink 
			url="http://www.scim-im.org/projects/skim"><application>Skim</application></ulink>,
			a port to &kde; of the <ulink 
			url="http://www.scim-im.org"><application>Scim</application></ulink>
			engine. Refer to your distribution's documentation to learn how to 
			install these programs. Configuration of such programs can be tricky
			too, in the case of <application>Skim</application> you will have to 
			define an environment variable <userinput><envar>XMODIFIERS</envar>="@im=SCIM"</userinput> 
			<emphasis>before</emphasis> starting <application>X</application>.</para>
		
		</sect2>
	
	</sect1>

</chapter>

<chapter id="scripting">

	<title>Scripting</title>

	<sect1 id="scripting_test">

		<title>Scripting in &kile;</title>

		<para>
			&kile;'s scripting feature allows for the execution of ECMAScript code. Scripts can be managed through the
			scripting panel in the sidebar.
		</para>

	</sect1>

	<sect1 id="scripting_api">

		<title>API Reference</title>

		<para>In this section we describe &kile;'s scripting programming interface.</para>

		<important>
			<para>
				Please note that the scripting API has not been finalized yet. The API described below might change in
				future versions of &kile;.
			</para>
		</important>

		<para>
			First of all, &kile;'s script execution environment provides a global object called "kile", which owns the following
			methods:
		</para>

		<variablelist>
			<varlistentry>
				<term>(kile).<function>currentTextDocument()</function></term>
				<listitem>
					<para>
						Returns a <classname>KileTextDocument</classname> object which reflects the currently active 
						text document. Returns <constant>null</constant> if no text document is active.
					</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(kile).<function>getInputValue(<parameter>caption</parameter>, <parameter>label</parameter>)</function></term>
				<listitem>
					<para>
						Opens a dialog with the given caption and label. Returns the value that user has entered.
					</para>
				</listitem>
			</varlistentry>
		</variablelist>

		<para>
			Objects of the type <classname>KileTextDocument</classname> represent text documents in &kile;. They have the following
			properties:
		</para>

		<variablelist>
			<varlistentry>
				<term>(KileTextDocument).<function>backspace()</function></term>
				<listitem>
					<para>
						Deletes the character that is located immediately before the current cursor position and moves the cursor
						one position backward in the text.
					</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>cursorLeft()</function></term>
				<listitem>
					<para>Moves the cursor one position backward in the text.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>cursorRight()</function></term>
				<listitem>
					<para>Moves the cursor one position forward in the text.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>insertText(<parameter>text</parameter>)</function></term>
				<listitem>
					<para>
						Inserts the text contained in the variable <parameter>text</parameter> into the document at the current
						cursor location.
					</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>insertBullet()</function></term>
				<listitem>
					<para>Inserts a bullet into the document at the current cursor position.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>nextBullet()</function></term>
				<listitem>
					<para>
						Selects the first bullet located in the document immediately after the
						current cursor location.
					</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>previousBullet()</function></term>
				<listitem>
					<para>
						Selects the first bullet located in the document immediately before the
						current cursor location.
					</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>up()</function></term>
				<listitem>
					<para>Moves the cursor one line up in the document.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>down()</function></term>
				<listitem>
					<para>Moves the cursor one line down in the document.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>cursorLine()</function></term>
				<listitem>
					<para>Returns the line which the cursor is currently located at.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>cursorColumn()</function></term>
				<listitem>
					<para>Returns the column which the cursor is currently located at.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>setCursorLine(<parameter>line</parameter>)</function></term>
				<listitem>
					<para>Moves the cursor to the line denoted by <parameter>line</parameter>.</para>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>(KileTextDocument).<function>setCursorColumn(<parameter>column</parameter>)</function></term>
				<listitem>
					<para>Moves the cursor to the column denoted by <parameter>line</parameter>.</para>
				</listitem>
			</varlistentry>
		</variablelist>

	</sect1>
	
</chapter>

<chapter id="help">
	
	<title>Help</title>
	
	<sect1 id="help_documents">
		
		<title>Help Documents</title>

		<para>&latex; is a rather sophisticated system, where the basic features
		can be expanded by a great variety of additional packages.
		&kile; provides a lot of different help to support the user.</para>

		<variablelist>

		<varlistentry>
		<term><guimenu>LaTeX Reference</guimenu></term> 
		<listitem><para>An alphabetical index of the most 
		common &latex; commands.</para></listitem>
		</varlistentry>
		
		<varlistentry>
		<term><guimenu>TeX Documentation</guimenu></term>
		<listitem><para>&tetex;/&texlive; comes with a huge amount of documents. 
		This includes a documentation for all included packages and an additional &latex; 
		reference.</para></listitem>
		</varlistentry>

		<varlistentry>
		<term><guimenu>LaTeX</guimenu></term>
		<listitem><para>A full reference for &tex; and friends. This is not 
		only a description of all programs, some important packages are also 
		mentioned. And it includes a full reference manual of &latex; 
		commands&mdash;ideal for looking up a particular piece of formatting 
		while writing a document. As this document is really extensive, 
		&kile; separates it with three important bookmarks.</para></listitem>
		</varlistentry>

		<varlistentry>
		<term><guimenu>LaTeX Command</guimenu></term>
		<listitem><para>Another alphabetical index of the most common 
		&latex; commands.</para></listitem>
		</varlistentry>

		<varlistentry>
		<term><guimenu>LaTeX Subject</guimenu></term>
		<listitem><para>A description of important &latex; 
		subjects.</para></listitem>
		</varlistentry>

		<varlistentry>
		<term><guimenu>LaTeX Env</guimenu></term>
		<listitem><para>An alphabetical index of the most common 
		&latex; environments.</para></listitem>
		</varlistentry>

		</variablelist>
		
	</sect1>
	
	<sect1 id="help_contextsentitive">
	
		<title>Context Sensitive Help</title>

		<para>&kile; also support a context sensitive help, which is called
		with <keycombo action="simul">&Ctrl;&Alt;<keycap>H</keycap></keycombo>,<keycap>K</keycap>.
		In <menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Kile</guimenuitem><guilabel>Help</guilabel></menuchoice>
		you can choose whether you want to use &kile;'s &latex; reference or the
		help system of &tetex;/&texlive;, which is the default setting.</para>

		<screenshot>
			<screeninfo>Bullets</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="config-userhelp.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Bullets</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

	</sect1>
	
	<sect1 id="help_search">
	
		<title>Searching for Keywords</title>
		
		<para>It is not always easy to find the right document, as &tetex;/&texlive; 
		comes with a huge amount of documents. As one possible help, &tetex;/&texlive; 
		provides a tiny program <application>texdoctk</application>. 
		It comes with a database of all documents that &kile; uses to offer 
		an interface to it.</para>

		<screenshot>
			<screeninfo>Bullets</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="dialog-docbrowser1.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Bullets</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

		<para>All documents are grouped into some categories, and the main 
		advantage is that you can search for packages names or keywords. 
		&kile; will then show only the results.</para> 
		
		<screenshot>
			<screeninfo>Bullets</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="dialog-docbrowser2.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Bullets</phrase>
			</textobject>
			</mediaobject>
		</screenshot>
		
		<para>A mouse double click or the <keycap>Space</keycap> key will start the 
		viewer for this document. This can be a arbitrary document, not only a 
		DVI, PS, PDF or HTML document. &kile; will take &konqueror; settings to 
		start a appropriate viewer.</para>

		
	</sect1>
	
	<sect1 id="help_userdefined">
	
		<title>User Defined Help</title>
	
		<para>Beside this static &tetex;/&texlive; documentation, &kile; supports also 
		another variable way for user-help documents. In <guimenu>Help</guimenu> 
		menu &kile; has a special <guimenu>User help</guimenu> 
		submenu, where the user can add documents of his own choice. 
		These can be the most important documents of &tetex;/&texlive; documentation, or even 
		self written documents. It is even possible to choose some Web URLs.</para> 

		<para>Go to 
		<menuchoice><guimenu>Settings</guimenu><guisubmenu>Configure Kile...</guisubmenu>
		<guimenuitem>Kile</guimenuitem><guilabel>Help</guilabel></menuchoice>
		and choose <guibutton>Configure</guibutton> button
		to configure this <guimenu>User help</guimenu> menu. You can add, 
		remove or navigate menu entries, and also insert separators to get 
		a better structure.</para>

		<para>Pressing the <guibutton>Add</guibutton> button will open 
		another dialog, where you must edit the name of the menu entry, 
		and choose the corresponding file or Web &url;. If you choose a Web &url;, 
		&konqueror; is started and you should copy the final &url;.</para>

		<screenshot>
			<screeninfo>Bullets</screeninfo>
			<mediaobject>
			<imageobject>
			<imagedata fileref="dialog-addhelp.png" format="PNG" />
			</imageobject>
			<textobject>
			<phrase>Bullets</phrase>
			</textobject>
			</mediaobject>
		</screenshot>

	</sect1>

</chapter>

<chapter id="credits">

	<title>Credits and License</title>

	<para>&kile; is an open-source user-friendly &latex; / &tex; source code editor. It will run on systems
	with the &kde; Desktop Environment installed. &kde; is available for several architectures
	with Linux and other Unix-like systems installed. &kile; is also part of the Fink project,
	which means you can run &kile; on a Mac with OS-X.</para>

	<para>Many thanks are owed to those who strive to continue the &kile; project, and the many
	hours of contributions made by those who sacrifice their time to develop tools we can all
	use under the <acronym>GNU</acronym> license. Up-to-date information about contributors can be found in
	the <guimenuitem>About &kile;</guimenuitem> dialog from the <guimenu>Help</guimenu> menu.
	</para>

	<para>Contributions among others from: Rob Lensen, Roland Schulz, Michael Margraf, Holger Danielsson</para>

	<para>Many thanks to all those involved!</para>

	&underFDL;		<!-- FDL: do not remove -->
	&underGPL;		<!-- GPL License -->

</chapter>


&documentation.index;

</book>

<!--
Local Variables:
mode: xml
sgml-minimize-attributes:nil
sgml-general-insert-case:lower
sgml-indent-step:0
sgml-indent-data:nil
End:

vim:tabstop=2:shiftwidth=2:expandtab
-->