Initial commit

Signed-off-by: Mavridis Philippe <mavridisf@gmail.com>

1 files changed, 285 insertions, 0 deletions

diff --git a/configure.in b/configure.in
new file mode 100644
index 0000000..dcf329a
--- /dev/null
+++ b/configure.in
@@ -0,0 +1,285 @@
+dnl =======================================================
+dnl FILE: ./admin/configure.in.min
+dnl =======================================================
+
+dnl    This file is part of the KDE libraries/packages
+dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
+ 
+dnl    This file is free software; you can redistribute it and/or
+dnl    modify it under the terms of the GNU Library General Public
+dnl    License as published by the Free Software Foundation; either
+dnl    version 2 of the License, or (at your option) any later version.
+ 
+dnl    This library is distributed in the hope that it will be useful,
+dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+dnl    Library General Public License for more details.
+ 
+dnl    You should have received a copy of the GNU Library General Public License
+dnl    along with this library; see the file COPYING.LIB.  If not, write to
+dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+dnl    Boston, MA 02110-1301, USA.
+
+# Original Author was Kalle@kde.org
+# I lifted it in some mater. (Stephan Kulow)
+# I used much code from Janos Farkas
+
+dnl Process this file with autoconf to produce a configure script.
+
+AC_INIT(acinclude.m4) dnl a source file from your sub dir
+
+dnl This is so we can use kde-common
+AC_CONFIG_AUX_DIR(admin)
+
+dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
+unset CDPATH
+
+dnl Checking host/target/build systems, for make, install etc.
+AC_CANONICAL_SYSTEM 
+dnl Perform program name transformation
+AC_ARG_PROGRAM
+
+dnl Automake doc recommends to do this only here. (Janos)
+AM_INIT_AUTOMAKE(klamav, 0.1) dnl searches for some needed programs
+
+KDE_SET_PREFIX
+
+dnl generate the config header
+AM_CONFIG_HEADER(config.h) dnl at the distribution this done
+
+dnl Checks for programs.
+AC_CHECK_COMPILERS
+AC_ENABLE_SHARED(yes)
+AC_ENABLE_STATIC(no)
+KDE_PROG_LIBTOOL
+
+dnl for NLS support. Call them in this order!
+dnl WITH_NLS is for the po files
+AM_KDE_WITH_NLS
+
+KDE_USE_QT(3.3.5)
+AC_PATH_KDE
+dnl =======================================================
+dnl FILE: configure.in.in
+dnl =======================================================
+
+#MIN_CONFIG(3.3.5)
+
+dnl PACKAGE set before
+AC_C_BIGENDIAN
+AC_CHECK_KDEMAXPATHLEN
+
+###############################################################################
+# BEGIN PKG-CONFIG CHECK
+###############################################################################
+
+AC_ARG_VAR(PKGCONFIGFOUND, [Path to pkg-config])
+AC_CHECK_PROG(PKGCONFIGFOUND, pkg-config, [yes])
+
+###############################################################################
+# END PKG-CONFIG CHECK
+###############################################################################
+
+###############################################################################
+# BEGIN SQLITE CHECK
+###############################################################################
+
+LIB_SQLITE=""
+
+AC_ARG_WITH(included-sqlite,
+    AC_HELP_STRING([--without-included-sqlite],[build KlamAV using system sqlite library]),
+    [included_sqlite=$withval],
+    [included_sqlite=yes]
+)
+
+if test x$included_sqlite = xno; then
+    if test x$PKGCONFIGFOUND = xyes; then
+        PKG_CHECK_MODULES(SQLITE, sqlite3 >= 3.0, have_sqlite=yes,have_sqlite=no)
+
+        if test x$have_sqlite = xyes; then
+            LIB_SQLITE=`pkg-config --libs sqlite3`
+        else
+            AC_MSG_ERROR(Can't find sqlite database library. Check your installation of sqlite or use included sqlite.)
+        fi
+    fi
+fi
+
+AC_SUBST(LIB_SQLITE)
+AM_CONDITIONAL(with_included_sqlite, [test x$included_sqlite = xyes])
+
+# Determine pointer size for sqlite
+KDE_CHECK_TYPES
+AC_DEFINE(SQLITE_PTR_SZ, SIZEOF_CHAR_P, [Determine pointer size for SQLite])
+
+###############################################################################
+# END SQLITE CHECK
+###############################################################################
+
+
+# ---- Taken from KOffice ----------------------
+# --- Check for KDE 3.2 or 3.3 or 3.4 or 3.5 ---
+
+AC_MSG_CHECKING([for KDE version])
+
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+kdeversion_save_CXXFLAGS="$CXXFLAGS"
+kdeversion_safe_LIBS="$LIBS"
+LIBS="$LIBS $X_EXTRA_LIBS"
+CXXFLAGS="$CXXFLAGS $all_includes"
+
+AC_COMPILE_IFELSE([
+#include <kdeversion.h>
+#if ! ( KDE_IS_VERSION( 3, 2, 90 ) )
+#error KDE 3.2
+#endif
+],
+        need_kde32_compat="no"
+,
+        need_kde32_compat="yes"
+)
+
+AC_COMPILE_IFELSE([
+#include <kdeversion.h>
+#if ! ( KDE_IS_VERSION( 3, 3, 90 ) )
+#error KDE 3.3
+#endif
+],
+        need_kde33_compat="no"
+,
+        need_kde33_compat="yes"
+)
+
+AC_COMPILE_IFELSE([
+#include <kdeversion.h>
+#if ! ( KDE_IS_VERSION( 3, 4, 90 ) )
+#error KDE 3.4
+#endif
+],
+        need_kde34_compat="no"
+,
+        need_kde34_compat="yes"
+)
+
+AC_COMPILE_IFELSE([
+#include <kdeversion.h>
+#if ! ( KDE_IS_VERSION( 3, 5, 2 ) )
+#error KDE 3.5.x (x < 2)
+#endif
+],
+        need_kde351_compat="no"
+,
+        need_kde351_compat="yes"
+)
+CXXFLAGS="$kdeversion_save_CXXFLAGS"
+LIBS="$kdeversion_safe_LIBS"
+AC_LANG_RESTORE
+
+if test "$need_kde32_compat" = "yes"; then
+        AC_MSG_ERROR([You have KDE 3.2.x. KlamAV needs KDE 3.5.2 or greater.])
+else
+        if test "$need_kde33_compat" = "yes"; then
+                AC_MSG_ERROR([You have KDE 3.3.x KlamAV needs KDE 3.5.2 or greater.])
+        else 
+                if test "$need_kde34_compat" = "yes"; then
+                        AC_MSG_ERROR([You have KDE 3.4.x KlamAV needs KDE 3.5.2 or greater.])
+                else
+                        if test "$need_kde351_compat" = "yes"; then
+                                AC_MSG_ERROR([You have KDE 3.5.1. KlamAV needs KDE 3.5.2 or greater.])
+                        else
+                                AC_MSG_RESULT([KDE 3.5.x (x >=2) or SVN trunk])
+                        fi
+                fi
+        fi
+fi
+
+
+# --- End KDE 3.2 check ---
+
+
+
+
+AC_CHECK_LIB(clamav, cl_scanfile, [LIB_CLAM=" -lclamav";],AC_MSG_ERROR(Can't find ClamAV's libraries. Please check your installation of ClamAV.))
+AC_SUBST(LIB_CLAM)
+
+AC_CHECK_LIB(clamav, cl_free, [ tempres="no" ],tempres="yes")
+if test "$tempres" = "yes"; then
+  AC_DEFINE([SUPPORT_CLAMAV_V095],[],[Support ClamAV 0.95])
+fi
+
+dnl disable updates
+
+# Whether we should use the disableupdates memory allocation debugging library.
+AC_MSG_CHECKING(whether to use disable-updates (build KlamAV with GUI updates disabled ))
+AC_ARG_WITH(disableupdates,
+[  --with-disableupdates          build KlamAV with GUI updates disabled . ],
+[if [[ "$withval" = "yes" ]]; then
+  disableupdates=1
+  AC_MSG_RESULT(yes)
+else
+  disableupdates=1
+  AC_MSG_RESULT(no)
+fi], [ disableupdates=0; AC_MSG_RESULT(no) ]
+)
+
+if [[ $disableupdates -eq 1 ]]; then
+  AC_DEFINE(DISABLE_UPDATES, 1, "Define to disable gui updates")
+fi
+KDE_CREATE_SUBDIRSLIST
+AC_CONFIG_FILES([ Makefile ])
+AC_CONFIG_FILES([ doc/Makefile ])
+AC_CONFIG_FILES([ doc/en/Makefile ])
+AC_CONFIG_FILES([ po/Makefile ])
+AC_CONFIG_FILES([ src/Makefile ])
+AC_CONFIG_FILES([ src/about/Makefile ])
+AC_CONFIG_FILES([ src/action/Makefile ])
+AC_CONFIG_FILES([ src/arkollon/Makefile ])
+AC_CONFIG_FILES([ src/icons/Makefile ])
+AC_CONFIG_FILES([ src/klammail/Makefile ])
+AC_CONFIG_FILES([ src/sqlite/Makefile ])
+AC_OUTPUT
+# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
+if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
+  # And if so, warn when they don't match
+  if test "$kde_libs_prefix" != "$given_prefix"; then
+    # And if kde doesn't know about the prefix yet
+    echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
+    if test $? -ne 0; then
+      echo ""
+      echo "Warning: you chose to install this package in $given_prefix,"
+      echo "but KDE was found in $kde_libs_prefix."
+      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
+      echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix"
+      echo "Then restart KDE."
+      echo ""
+    fi
+  fi
+fi
+
+if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
+  echo ""
+  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
+  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
+  echo ""
+  echo "For better performance, consider including the Qt visibility supporting patch"
+  echo "located at:"
+  echo ""
+  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
+  echo ""
+  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
+  echo "everything will continue to work just fine without it."
+  echo ""
+fi
+
+if test "$all_tests" = "bad"; then
+  if test ! "$cache_file" = "/dev/null"; then
+    echo ""
+    echo "Please remove the file $cache_file after changing your setup"
+    echo "so that configure will find the changes next time."
+    echo ""
+  fi
+else
+  echo ""
+  echo "Good - your configure finished. Start make now"
+  echo ""
+fi