Renaming of files in preparation for code style tools.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

1 files changed, 771 insertions, 771 deletions

diff --git a/po/bs.po b/po/bs.po
index 14e2a44..73b5cd8 100644
--- a/po/bs.po
+++ b/po/bs.po
@@ -33,50 +33,50 @@ msgid ""
 "Your emails"
 msgstr ""
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:50
-#: conduits/malconduit/mal-factory.cc:70
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
+#: conduits/malconduit/mal-factory.cpp:70
 msgid "MAL Synchronization Conduit for KPilot"
 msgstr "MAL sinhronicioni provod za KPilot-a"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:52
-#: conduits/malconduit/mal-factory.cc:72
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
+#: conduits/malconduit/mal-factory.cpp:72
 msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
 msgstr ""
 "Sinhronizuje sadržaj sa MAL servera, kao što je AvantGo, sa ručnim računarom"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:56
-#: conduits/abbrowserconduit/abbrowser-setup.cc:54
-#: conduits/knotes/knotes-factory.cc:73 conduits/malconduit/mal-factory.cc:76
-#: conduits/memofileconduit/memofile-factory.cc:69
-#: conduits/notepadconduit/notepad-factory.cc:73
-#: conduits/null/null-factory.cc:71 conduits/recordconduit/factory.cc:72
-#: conduits/sysinfoconduit/sysinfo-setup.cc:101
-#: conduits/timeconduit/time-setup.cc:54
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
+#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
+#: conduits/memofileconduit/memofile-factory.cpp:69
+#: conduits/notepadconduit/notepad-factory.cpp:73
+#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
+#: conduits/timeconduit/time-setup.cpp:54
 msgid "Primary Author"
 msgstr "Glavni autor"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:58
-#: conduits/malconduit/mal-factory.cc:78
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
+#: conduits/malconduit/mal-factory.cpp:78
 msgid "Author of libmal and the JPilot AvantGo conduit"
 msgstr "Autor libmal-a i JPilot-ovog provoda za AvantGo"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:60
-#: conduits/malconduit/mal-factory.cc:80
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
+#: conduits/malconduit/mal-factory.cpp:80
 msgid "Author of syncmal"
 msgstr "Autor syncmal-a"
 
-#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:62
-#: conduits/malconduit/mal-factory.cc:82
+#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
+#: conduits/malconduit/mal-factory.cpp:82
 msgid "Authors of the malsync library (c) 1997-1999"
 msgstr "Autori biblioteke malsync (c) 1997-1999"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:125
-#: conduits/abbrowserconduit/abbrowser-setup.cc:71
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
 msgid "Addressbook"
 msgstr "Adresar"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:291
-#: conduits/vcalconduit/vcal-conduitbase.cc:298
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:298
 #, fuzzy
 msgid ""
 "You chose to sync with the file \"%1\", which cannot be opened. Please make "
@@ -87,133 +87,133 @@ msgstr ""
 "napravi. Provjerite da li ste naveli ispravno ime datoteke u dijalogu za "
 "podešavanje provoda. Obustavljam provod."
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:327
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:328
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
 msgid "Unable to initialize and load the addressbook for the sync."
 msgstr "Ne mogu da inicijalizujem i učitam adresar za sinhronizaciju."
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:340
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:341
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
 #, fuzzy
 msgid "Unable to lock addressbook for writing.  Can't sync!"
 msgstr "Ne mogu da inicijalizujem i učitam adresar za sinhronizaciju."
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:396
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
 msgid ""
 "An error occurred while uploading \"%1\". You can try to upload the "
 "temporary local file \"%2\" manually"
 msgstr ""
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:518
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
 msgid "Unable to open the addressbook databases on the handheld."
 msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:539
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
 msgid "Unable to open the addressbook."
 msgstr "Ne mogu da otvorim adresar."
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1526
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
 msgid "Item on PC"
 msgstr "Stavka na PC-ju"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1527
-#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:308
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
 msgid "Handheld"
 msgstr "Ručni računar"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1528
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
 msgid "Last sync"
 msgstr "Posljednja sinhronizacija"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1549
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
 msgid "Last name"
 msgstr "Prezime"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1550
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
 msgid "First name"
 msgstr "Ime"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1551
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
 msgid "Organization"
 msgstr "Organizacija"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1552
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
 msgid "Title"
 msgstr "Naslov"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1553
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
 msgid "Note"
 msgstr "Napomena"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1555
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
 msgid "Custom 1"
 msgstr "Posebno 1"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1556
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
 msgid "Custom 2"
 msgstr "Posebno 2"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1557
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
 msgid "Custom 3"
 msgstr "Posebno 3"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1558
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
 msgid "Custom 4"
 msgstr "Posebno 4"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1560
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
 msgid "Work Phone"
 msgstr "Telefon na poslu"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1561
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
 msgid "Home Phone"
 msgstr "Kućni telefon"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1562
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
 msgid "Mobile Phone"
 msgstr "Mobilni telefon"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1563
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
 msgid "Fax"
 msgstr "Faks"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1564
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
 msgid "Pager"
 msgstr "Pejdžer"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1565
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
 msgid "Other"
 msgstr "Ostalo"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1566
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
 msgid "Email"
 msgstr "E-adresa"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1569
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
 msgid "Address"
 msgstr "Adresa"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1570
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
 msgid "City"
 msgstr "Grad"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1571
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
 msgid "Region"
 msgstr "Regija"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1572
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
 msgid "Postal code"
 msgstr "Poštanski broj"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1573
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
 msgid "Country"
 msgstr "Država"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1587 kpilot/listCat.cc:84
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
 msgid "Category"
 msgstr "Kategorija"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1752
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
 msgid ""
 "The following address entry was changed, but does no longer exist on the "
 "handheld. Please resolve this conflict:"
@@ -221,7 +221,7 @@ msgstr ""
 "Sljedeća adresa je promenjena, ali više ne postoji na ručnom računaru. "
 "Razrešite ovaj konflikt:"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1756
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
 msgid ""
 "The following address entry was changed, but does no longer exist on the PC. "
 "Please resolve this conflict:"
@@ -229,7 +229,7 @@ msgstr ""
 "Sljedeća adresa je promenjena, ali više ne postoji na PC-ju. Razrešite ovaj "
 "konflikt:"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1760
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
 msgid ""
 "The following address entry was changed on the handheld as well as on the PC "
 "side. The changes could not be merged automatically, so please resolve the "
@@ -238,136 +238,136 @@ msgstr ""
 "Sljedeća adresa je promenjena i na ručnom računaru i na PC-ju. Izmjene nisu "
 "mogle automatski da se stope, moraćete ručno da razrešite konflikt:"
 
-#: conduits/abbrowserconduit/abbrowser-conduit.cc:1762
+#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
 msgid "Address conflict"
 msgstr "Konflikt adresa"
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:48
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
 msgid "Abbrowser Conduit for KPilot"
 msgstr "Provod KPilot-a za Abbrowser"
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:50
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
 msgid "Configures the Abbrowser Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za Abbrowser"
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:56
-#: conduits/abbrowserconduit/abbrowser-setup.cc:59
-#: conduits/docconduit/doc-factory.cc:68 conduits/popmail/setupDialog.cc:74
-#: conduits/vcalconduit/todo-setup.cc:59 conduits/vcalconduit/todo-setup.cc:63
-#: conduits/vcalconduit/vcal-setup.cc:50 conduits/vcalconduit/vcal-setup.cc:54
-#: kpilot/kpilot.cc:1027 kpilot/pilotDaemon.cc:1323
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
+#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
+#: conduits/vcalconduit/todo-setup.cpp:59 conduits/vcalconduit/todo-setup.cpp:63
+#: conduits/vcalconduit/vcal-setup.cpp:50 conduits/vcalconduit/vcal-setup.cpp:54
+#: kpilot/kpilot.cpp:1027 kpilot/pilotDaemon.cpp:1323
 msgid "Maintainer"
 msgstr "Održavalac"
 
-#: conduits/abbrowserconduit/abbrowser-setup.cc:61
-#: conduits/knotes/knotes-factory.cc:77
+#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
+#: conduits/knotes/knotes-factory.cpp:77
 msgid "UI"
 msgstr "UI"
 
-#: conduits/abbrowserconduit/resolutionDialog.cc:162
+#: conduits/abbrowserconduit/resolutionDialog.cpp:162
 msgid ""
 "_: Entries in the resolution dialog. First the name of the field, then the "
 "entry from the Handheld or PC after the colon\n"
 "%1: %2"
 msgstr "%1: %2"
 
-#: conduits/abbrowserconduit/resolutionDialog.cc:164
+#: conduits/abbrowserconduit/resolutionDialog.cpp:164
 msgid ""
 "_: Denoting newlines in Address entries. No need to translate\n"
 " | "
 msgstr " | "
 
-#: conduits/abbrowserconduit/resolutionDialog.cc:214
-#: conduits/abbrowserconduit/resolutionDialog.cc:220
+#: conduits/abbrowserconduit/resolutionDialog.cpp:214
+#: conduits/abbrowserconduit/resolutionDialog.cpp:220
 #, fuzzy
 msgid "Delete entry"
 msgstr "Obriši slog"
 
-#: conduits/docconduit/DOC-converter.cc:198
+#: conduits/docconduit/DOC-converter.cpp:198
 msgid "Unable to open text file %1 for reading."
 msgstr "Ne mogu da otvorim za čitanje tekstualni datoteka %1."
 
-#: conduits/docconduit/DOC-converter.cc:383
+#: conduits/docconduit/DOC-converter.cpp:383
 msgid "Unable to open Database for writing"
 msgstr "Ne mogu da otvorim za pisanje bazu podataka"
 
-#: conduits/docconduit/DOC-converter.cc:440
+#: conduits/docconduit/DOC-converter.cpp:440
 #, c-format
 msgid "Unable to open palm doc database %1"
 msgstr "Ne mogu da otvorim palm doc bazu podataka %1"
 
-#: conduits/docconduit/DOC-converter.cc:510
+#: conduits/docconduit/DOC-converter.cpp:510
 msgid "No filename set for the conversion"
 msgstr "Nije postavljeno ime datoteke za konverziju"
 
-#: conduits/docconduit/DOC-converter.cc:515
+#: conduits/docconduit/DOC-converter.cpp:515
 msgid "Unable to open Database for reading"
 msgstr "Ne mogu da otvorim za čitanje bazu podataka"
 
-#: conduits/docconduit/DOC-converter.cc:523
+#: conduits/docconduit/DOC-converter.cpp:523
 #, c-format
 msgid "Unable to read database header for database %1."
 msgstr "Ne mogu da pročitam zaglavlje baze podataka %1."
 
-#: conduits/docconduit/DOC-converter.cc:543
+#: conduits/docconduit/DOC-converter.cpp:543
 #, c-format
 msgid "Unable to open output file %1."
 msgstr "Ne mogu da otvorim izlazni datoteka %1."
 
-#: conduits/docconduit/DOC-converter.cc:558
+#: conduits/docconduit/DOC-converter.cpp:558
 msgid "Could not read text record #%1 from Database %2"
 msgstr "Nisam mogao da pročitam tekstualni slog #%1 iz baze podataka %2"
 
-#: conduits/docconduit/DOC-converter.cc:577
+#: conduits/docconduit/DOC-converter.cpp:577
 msgid "Could not read bookmark record #%1 from Database %2"
 msgstr "Nisam mogao da pročitam markerski slog #%1 iz baze podataka %2"
 
-#: conduits/docconduit/DOC-converter.cc:594
+#: conduits/docconduit/DOC-converter.cpp:594
 msgid "Unable to open file %1 for the bookmarks of %2."
 msgstr "Ne mogu da otvorim datoteka %1 za markere od %2."
 
-#: conduits/docconduit/doc-conduit.cc:84
+#: conduits/docconduit/doc-conduit.cpp:84
 msgid "DOC"
 msgstr "DOC"
 
-#: conduits/docconduit/doc-conduit.cc:272
+#: conduits/docconduit/doc-conduit.cpp:272
 msgid "Searching for texts and databases to synchronize"
 msgstr "Tražim tekstove i baze podataka za sinhronizaciju"
 
-#: conduits/docconduit/doc-conduit.cc:332
+#: conduits/docconduit/doc-conduit.cpp:332
 #, fuzzy
 msgid "Database created."
 msgstr "Nema izabrane baze podataka"
 
-#: conduits/docconduit/doc-conduit.cc:380
+#: conduits/docconduit/doc-conduit.cpp:380
 msgid "Unable to install the locally created PalmDOC %1 to the handheld."
 msgstr "Ne mogu da instaliram lokalno napravljen PalmDOC %1 na ručni računar."
 
-#: conduits/docconduit/doc-conduit.cc:383
+#: conduits/docconduit/doc-conduit.cpp:383
 msgid "Conversion of PalmDOC \"%1\" failed."
 msgstr "Konverzija PalmDOC-a '%1' nije uspela."
 
-#: conduits/docconduit/doc-conduit.cc:391
+#: conduits/docconduit/doc-conduit.cpp:391
 #, fuzzy, c-format
 msgid "Unable to open or create the database %1."
 msgstr "Ne mogu da otvorim ili napravim bazu podataka %1"
 
 #: conduits/abbrowserconduit/kaddressbookConduit.ui:147
-#: conduits/docconduit/doc-conduit.cc:625
+#: conduits/docconduit/doc-conduit.cpp:625
 #: conduits/docconduit/doc-setupdialog.ui:401
 #, no-c-format
 msgid "Conflict Resolution"
 msgstr "Razrešenje konflikta"
 
-#: conduits/docconduit/doc-conduit.cc:630
+#: conduits/docconduit/doc-conduit.cpp:630
 msgid "Sync aborted by user."
 msgstr "Sinhronozacija prekinuta od strane korisnika."
 
-#: conduits/docconduit/doc-conduit.cc:668
+#: conduits/docconduit/doc-conduit.cpp:668
 msgid "Synchronizing text \"%1\""
 msgstr "Sinhronizujem tekst '%1'"
 
-#: conduits/docconduit/doc-conflictdialog.cc:53
+#: conduits/docconduit/doc-conflictdialog.cpp:53
 msgid ""
 "Here is a list of all text files and DOC databases the conduit found. The "
 "conduit tried to determine the correct sync direction, but for databases in "
@@ -381,72 +381,72 @@ msgstr ""
 "je izmenjen i na ručnom i na stonom računaru). Navedite kod ovih baza koja "
 "je verzija tekuća."
 
-#: conduits/docconduit/doc-conflictdialog.cc:57
+#: conduits/docconduit/doc-conflictdialog.cpp:57
 msgid ""
 "You can also change the sync direction for databases without a conflict."
 msgstr ""
 "Takođe možete promijeniti pravac sinhronizacije za baze podataka koje nemaju "
 "konflikt."
 
-#: conduits/docconduit/doc-conflictdialog.cc:61
+#: conduits/docconduit/doc-conflictdialog.cpp:61
 msgid "DOC Databases"
 msgstr "DOC baze podataka"
 
-#: conduits/docconduit/doc-conflictdialog.cc:106
+#: conduits/docconduit/doc-conflictdialog.cpp:106
 msgid "No Sync"
 msgstr "Bez sinhronizacije"
 
-#: conduits/docconduit/doc-conflictdialog.cc:107
+#: conduits/docconduit/doc-conflictdialog.cpp:107
 msgid "Sync Handheld to PC"
 msgstr "Sinhronizuj ručni računar prema PC-ju"
 
-#: conduits/docconduit/doc-conflictdialog.cc:108
+#: conduits/docconduit/doc-conflictdialog.cpp:108
 msgid "Sync PC to Handheld"
 msgstr "Sinhronizuj PC prema ručnom računaru"
 
-#: conduits/docconduit/doc-conflictdialog.cc:109
+#: conduits/docconduit/doc-conflictdialog.cpp:109
 msgid "Delete Both Databases"
 msgstr "Obriši obje baze podataka"
 
-#: conduits/docconduit/doc-conflictdialog.cc:113
+#: conduits/docconduit/doc-conflictdialog.cpp:113
 #, fuzzy
 msgid "More Info..."
 msgstr "Još informacija..."
 
-#: conduits/docconduit/doc-conflictdialog.cc:155
+#: conduits/docconduit/doc-conflictdialog.cpp:155
 msgid "unchanged"
 msgstr "nepromenjeno"
 
-#: conduits/docconduit/doc-conflictdialog.cc:156
+#: conduits/docconduit/doc-conflictdialog.cpp:156
 msgid "new"
 msgstr "novo"
 
-#: conduits/docconduit/doc-conflictdialog.cc:157
+#: conduits/docconduit/doc-conflictdialog.cpp:157
 msgid "changed"
 msgstr "promenjeno"
 
-#: conduits/docconduit/doc-conflictdialog.cc:158
+#: conduits/docconduit/doc-conflictdialog.cpp:158
 msgid "only bookmarks changed"
 msgstr "samo su markeri promenjeni"
 
-#: conduits/docconduit/doc-conflictdialog.cc:159
+#: conduits/docconduit/doc-conflictdialog.cpp:159
 msgid "deleted"
 msgstr "obrisano"
 
-#: conduits/docconduit/doc-conflictdialog.cc:160
+#: conduits/docconduit/doc-conflictdialog.cpp:160
 msgid "does not exist"
 msgstr "ne postoji"
 
-#: conduits/docconduit/doc-conflictdialog.cc:161
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:207
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:404
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:405
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:406
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:407
+#: conduits/docconduit/doc-conflictdialog.cpp:161
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
 msgid "unknown"
 msgstr "nepoznato"
 
-#: conduits/docconduit/doc-conflictdialog.cc:171
+#: conduits/docconduit/doc-conflictdialog.cpp:171
 msgid ""
 "Status of the database %1:\n"
 "\n"
@@ -454,15 +454,15 @@ msgstr ""
 "Status baze podataka %1:\n"
 "\n"
 
-#: conduits/docconduit/doc-conflictdialog.cc:172
+#: conduits/docconduit/doc-conflictdialog.cpp:172
 msgid "Handheld: %1\n"
 msgstr "Ručni računar: %1\n"
 
-#: conduits/docconduit/doc-conflictdialog.cc:173
+#: conduits/docconduit/doc-conflictdialog.cpp:173
 msgid "Desktop: %1\n"
 msgstr "Stoni računar: %1\n"
 
-#: conduits/docconduit/doc-conflictdialog.cc:175
+#: conduits/docconduit/doc-conflictdialog.cpp:175
 msgid "Database information"
 msgstr "Informacije o bazi podataka"
 
@@ -470,15 +470,15 @@ msgstr "Informacije o bazi podataka"
 msgid "Resolution Dialog"
 msgstr ""
 
-#: conduits/docconduit/doc-factory.cc:63
+#: conduits/docconduit/doc-factory.cpp:63
 msgid "Palm DOC Conduit for KPilot"
 msgstr "Provod KPilot-a za PalmDOC"
 
-#: conduits/docconduit/doc-factory.cc:64
+#: conduits/docconduit/doc-factory.cpp:64
 msgid "Configures the DOC Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za PalmDOC"
 
-#: conduits/docconduit/doc-setup.cc:64
+#: conduits/docconduit/doc-setup.cpp:64
 msgid "Palm DOC"
 msgstr "PalmDOC"
 
@@ -499,10 +499,10 @@ msgstr "Održavalac KPilot-a"
 msgid "PalmDOC Converter"
 msgstr "PalmDOC konvertor"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:178
-#: conduits/docconduit/kpalmdoc_dlg.cc:214
-#: conduits/docconduit/kpalmdoc_dlg.cc:327
-#: conduits/docconduit/kpalmdoc_dlg.cc:352
+#: conduits/docconduit/kpalmdoc_dlg.cpp:178
+#: conduits/docconduit/kpalmdoc_dlg.cpp:214
+#: conduits/docconduit/kpalmdoc_dlg.cpp:327
+#: conduits/docconduit/kpalmdoc_dlg.cpp:352
 msgid ""
 "<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
 "<br>Use folder <em>%2</em> instead?</qt>"
@@ -510,15 +510,15 @@ msgstr ""
 "<qt>Izabrali ste sinhronizaciju direktorija, ali ste zadali ime datoteke <em>"
 "%1</em>.<br>Da umjesto toga koristim direktorij <em>%2</em>?</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:181
-#: conduits/docconduit/kpalmdoc_dlg.cc:217
-#: conduits/docconduit/kpalmdoc_dlg.cc:330
-#: conduits/docconduit/kpalmdoc_dlg.cc:356
+#: conduits/docconduit/kpalmdoc_dlg.cpp:181
+#: conduits/docconduit/kpalmdoc_dlg.cpp:217
+#: conduits/docconduit/kpalmdoc_dlg.cpp:330
+#: conduits/docconduit/kpalmdoc_dlg.cpp:356
 #, fuzzy
 msgid "Use Folder"
 msgstr "&Tekstualni direktorij:"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:194
+#: conduits/docconduit/kpalmdoc_dlg.cpp:194
 msgid ""
 "<qt>The folder <em>%1</em> for the handheld database files is not a valid "
 "folder.</qt>"
@@ -526,7 +526,7 @@ msgstr ""
 "<qt>Direktorijum <em>%1</em> za datoteke baza podataka ručnog računara, nije "
 "ispravan.</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:203
+#: conduits/docconduit/kpalmdoc_dlg.cpp:203
 msgid ""
 "<qt>The folder <em>%1</em> for the handheld database files is not a valid "
 "directory.</qt>"
@@ -534,104 +534,104 @@ msgstr ""
 "<qt>Direktorijum <em>%1</em> za datoteke baza podataka ručnog računara, nije "
 "ispravan.</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:231
+#: conduits/docconduit/kpalmdoc_dlg.cpp:231
 msgid ""
 "<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
 msgstr ""
 "<qt>Direktorijum <em>%1</em> za tekstualne datoteke nije mogao da se napravi."
 "</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:254
-#: conduits/docconduit/kpalmdoc_dlg.cc:392
+#: conduits/docconduit/kpalmdoc_dlg.cpp:254
+#: conduits/docconduit/kpalmdoc_dlg.cpp:392
 msgid "The following texts were successfully converted:"
 msgstr "Sljedeći tekstovi su uspješno konvertovani:"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:255
-#: conduits/docconduit/kpalmdoc_dlg.cc:393
+#: conduits/docconduit/kpalmdoc_dlg.cpp:255
+#: conduits/docconduit/kpalmdoc_dlg.cpp:393
 msgid "Conversion Successful"
 msgstr "Konverzija je uspela"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:259
-#: conduits/docconduit/kpalmdoc_dlg.cc:397
+#: conduits/docconduit/kpalmdoc_dlg.cpp:259
+#: conduits/docconduit/kpalmdoc_dlg.cpp:397
 msgid "No text files were converted correctly"
 msgstr "Nema ispravno konvertovanih tekstualnih fajlova"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:269
-#: conduits/docconduit/kpalmdoc_dlg.cc:407
+#: conduits/docconduit/kpalmdoc_dlg.cpp:269
+#: conduits/docconduit/kpalmdoc_dlg.cpp:407
 msgid "<qt>The file <em>%1</em> does not exist.</qt>"
 msgstr "<qt>Fajl <em>%1</em> ne postoji.</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:285
-#: conduits/docconduit/kpalmdoc_dlg.cc:415
+#: conduits/docconduit/kpalmdoc_dlg.cpp:285
+#: conduits/docconduit/kpalmdoc_dlg.cpp:415
 msgid "Conversion of file %1 successful."
 msgstr "Konverzija datoteke %1 je upela."
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:342
+#: conduits/docconduit/kpalmdoc_dlg.cpp:342
 msgid ""
 "<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
 msgstr ""
 "<qt>Direktorijum <em>%1</em> za tekstualne datoteke nije ispravan.</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:369
+#: conduits/docconduit/kpalmdoc_dlg.cpp:369
 msgid ""
 "<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
 msgstr ""
 "<qt>Direktorijum <em>%1</em> za PalmDOC datoteke nije mogao da se napravi.</"
 "qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:437
+#: conduits/docconduit/kpalmdoc_dlg.cpp:437
 msgid "&Text folder:"
 msgstr "&Tekstualni direktorij:"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:438
+#: conduits/docconduit/kpalmdoc_dlg.cpp:438
 msgid "&PalmDOC folder:"
 msgstr "PalmDOC &direktorij:"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:442
+#: conduits/docconduit/kpalmdoc_dlg.cpp:442
 #: conduits/docconduit/kpalmdoc_dlgbase.ui:66
 #, no-c-format
 msgid "&Text file:"
 msgstr "&Tekstualni datoteka:"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:443
+#: conduits/docconduit/kpalmdoc_dlg.cpp:443
 msgid "&DOC file:"
 msgstr "DOC &datoteka:"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:458
+#: conduits/docconduit/kpalmdoc_dlg.cpp:458
 #, fuzzy
 msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
 msgstr ""
 "<qt>Fajl baze podataka <em>%1</em> već postoji. Da li da ga prebrišem?</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:459
-#: conduits/docconduit/kpalmdoc_dlg.cc:504 kpilot/addressWidget.cc:698
-#: kpilot/logWidget.cc:343
+#: conduits/docconduit/kpalmdoc_dlg.cpp:459
+#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
+#: kpilot/logWidget.cpp:343
 #, fuzzy
 msgid "Overwrite"
 msgstr "&Prebriši"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:484
-#: conduits/docconduit/kpalmdoc_dlg.cc:520
+#: conduits/docconduit/kpalmdoc_dlg.cpp:484
+#: conduits/docconduit/kpalmdoc_dlg.cpp:520
 msgid "<qt>Error while converting the text %1.</qt>"
 msgstr "<qt>Greška pri konvertovanju teksta %1.</qt>"
 
-#: conduits/docconduit/kpalmdoc_dlg.cc:503
+#: conduits/docconduit/kpalmdoc_dlg.cpp:503
 #, fuzzy
 msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
 msgstr ""
 "<qt>Tekstualni datoteka <em>%1</em> već postoji. Da li da ga prebrišem?</qt>"
 
-#: conduits/knotes/knotes-action.cc:232
+#: conduits/knotes/knotes-action.cpp:232
 #, fuzzy
 msgid "Could not open MemoDB on the handheld."
 msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
 
-#: conduits/knotes/knotes-action.cc:272
+#: conduits/knotes/knotes-action.cpp:272
 #, fuzzy, c-format
 msgid "Could not load the resource at: %1"
 msgstr "Nisam mogao da učitam provod %1."
 
-#: conduits/knotes/knotes-action.cc:808
+#: conduits/knotes/knotes-action.cpp:808
 #, fuzzy, c-format
 msgid ""
 "_n: Added one new memo.\n"
@@ -641,7 +641,7 @@ msgstr ""
 "Dodate %n nove beleške.\n"
 "Dodato %n novih beležaka."
 
-#: conduits/knotes/knotes-action.cc:814
+#: conduits/knotes/knotes-action.cpp:814
 #, fuzzy, c-format
 msgid ""
 "_n: Modified one memo.\n"
@@ -651,7 +651,7 @@ msgstr ""
 "Izmenjene %n beleške.\n"
 "Izmenjeno %n beleški."
 
-#: conduits/knotes/knotes-action.cc:821
+#: conduits/knotes/knotes-action.cpp:821
 #, fuzzy, c-format
 msgid ""
 "_n: Deleted one memo.\n"
@@ -661,7 +661,7 @@ msgstr ""
 "Dodate %n beleške u KNotes.\n"
 "Dodato %n beležaka u KNotes."
 
-#: conduits/knotes/knotes-action.cc:827
+#: conduits/knotes/knotes-action.cpp:827
 #, fuzzy, c-format
 msgid ""
 "_n: Added one note to KNotes.\n"
@@ -671,7 +671,7 @@ msgstr ""
 "Dodate %n beleške u KNotes.\n"
 "Dodato %n beležaka u KNotes."
 
-#: conduits/knotes/knotes-action.cc:833
+#: conduits/knotes/knotes-action.cpp:833
 #, fuzzy, c-format
 msgid ""
 "_n: Modified one note in KNotes.\n"
@@ -681,7 +681,7 @@ msgstr ""
 "Izmenjene %n beleške.\n"
 "Izmenjeno %n beleški."
 
-#: conduits/knotes/knotes-action.cc:839
+#: conduits/knotes/knotes-action.cpp:839
 #, fuzzy, c-format
 msgid ""
 "_n: Deleted one note from KNotes.\n"
@@ -691,165 +691,165 @@ msgstr ""
 "Dodate %n beleške u KNotes.\n"
 "Dodato %n beležaka u KNotes."
 
-#: conduits/knotes/knotes-action.cc:844
+#: conduits/knotes/knotes-action.cpp:844
 msgid "No change to KNotes."
 msgstr ""
 
-#: conduits/knotes/knotes-factory.cc:67
+#: conduits/knotes/knotes-factory.cpp:67
 msgid "KNotes Conduit for KPilot"
 msgstr "Provod KPilot-a za KNotes"
 
-#: conduits/knotes/knotes-factory.cc:69
+#: conduits/knotes/knotes-factory.cpp:69
 msgid "Configures the KNotes Conduit for KPilot"
 msgstr "Konfiguriše se provod KPilot-a za KNotes"
 
-#: conduits/knotes/knotes-setup.cc:59
+#: conduits/knotes/knotes-setup.cpp:59
 msgid "KNotes"
 msgstr "KNotes"
 
-#: conduits/malconduit/mal-conduit.cc:121 conduits/malconduit/mal-setup.cc:62
+#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
 msgid "MAL"
 msgstr "MAL"
 
-#: conduits/malconduit/mal-conduit.cc:193
+#: conduits/malconduit/mal-conduit.cpp:193
 msgid ""
 "Skipping MAL sync, because last synchronization was not long enough ago."
 msgstr ""
 "Preskačem MAL sinhroniciju, zato što posljednja sinhronicija nije bila "
 "dovoljno davno."
 
-#: conduits/malconduit/mal-conduit.cc:202
+#: conduits/malconduit/mal-conduit.cpp:202
 msgid "MAL synchronization failed (no SyncInfo)."
 msgstr "MAL sinhronicija nije uspela (nema SyncInfo-a)."
 
-#: conduits/malconduit/mal-conduit.cc:217
+#: conduits/malconduit/mal-conduit.cpp:217
 msgid "No proxy server is set."
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:220
+#: conduits/malconduit/mal-conduit.cpp:220
 #, c-format
 msgid "Using proxy server: %1"
 msgstr ""
 
-#: conduits/malconduit/mal-conduit.cc:259
+#: conduits/malconduit/mal-conduit.cpp:259
 #, fuzzy
 msgid "No SOCKS proxy is set."
 msgstr "SOCKS p&roksi"
 
-#: conduits/malconduit/mal-conduit.cc:262
+#: conduits/malconduit/mal-conduit.cpp:262
 #, fuzzy, c-format
 msgid "Using SOCKS proxy: %1"
 msgstr "SOCKS p&roksi"
 
-#: conduits/memofileconduit/memofile-conduit.cc:70
-#: conduits/memofileconduit/memofile-factory.cc:61
+#: conduits/memofileconduit/memofile-conduit.cpp:70
+#: conduits/memofileconduit/memofile-factory.cpp:61
 #, fuzzy
 msgid "Memofile"
 msgstr "Prikazivač beleški"
 
-#: conduits/memofileconduit/memofile-conduit.cc:101
+#: conduits/memofileconduit/memofile-conduit.cpp:101
 #, fuzzy
 msgid "Unable to open the memo databases on the handheld."
 msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
 
-#: conduits/memofileconduit/memofile-conduit.cc:109
+#: conduits/memofileconduit/memofile-conduit.cpp:109
 msgid "Cannot initialize from pilot."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:116
+#: conduits/memofileconduit/memofile-conduit.cpp:116
 msgid "Cannot initialize the memo files from disk."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-conduit.cc:123
+#: conduits/memofileconduit/memofile-conduit.cpp:123
 #, fuzzy, c-format
 msgid " Syncing with %1."
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: conduits/memofileconduit/memofile-conduit.cc:126
+#: conduits/memofileconduit/memofile-conduit.cpp:126
 #, fuzzy
 msgid " Copying Pilot to PC..."
 msgstr "Proveravam posljednji PC..."
 
-#: conduits/memofileconduit/memofile-conduit.cc:131
+#: conduits/memofileconduit/memofile-conduit.cpp:131
 #, fuzzy
 msgid " Copying PC to Pilot..."
 msgstr "&Podesi izabrani..."
 
-#: conduits/memofileconduit/memofile-conduit.cc:135
+#: conduits/memofileconduit/memofile-conduit.cpp:135
 msgid " Doing regular sync..."
 msgstr ""
 
-#: conduits/memofileconduit/memofile-factory.cc:63
+#: conduits/memofileconduit/memofile-factory.cpp:63
 #, fuzzy
 msgid "Memofile Conduit for KPilot"
 msgstr "Provod KPilot-a za poštu"
 
-#: conduits/memofileconduit/memofile-factory.cc:65
+#: conduits/memofileconduit/memofile-factory.cpp:65
 #, fuzzy
 msgid "Configures the Memofile Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za poštu"
 
-#: conduits/notepadconduit/notepad-conduit.cc:59
-#: conduits/notepadconduit/notepad-factory.cc:89
+#: conduits/notepadconduit/notepad-conduit.cpp:59
+#: conduits/notepadconduit/notepad-factory.cpp:89
 #, fuzzy
 msgid "Notepad"
 msgstr "Napomena"
 
-#: conduits/notepadconduit/notepad-conduit.cc:79
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:591
+#: conduits/notepadconduit/notepad-conduit.cpp:79
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
 #, c-format
 msgid "Unable to open %1"
 msgstr "Ne mogu da otvorim %1"
 
-#: conduits/notepadconduit/notepad-conduit.cc:105
+#: conduits/notepadconduit/notepad-conduit.cpp:105
 #, c-format
 msgid ""
 "_n: 1 notepad could not be saved\n"
 "%n notepads could not be saved"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-conduit.cc:106
+#: conduits/notepadconduit/notepad-conduit.cpp:106
 #, c-format
 msgid ""
 "_n: 1 notepad saved\n"
 "%n notepads saved"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-factory.cc:67
+#: conduits/notepadconduit/notepad-factory.cpp:67
 msgid "Saves notepads to png files"
 msgstr ""
 
-#: conduits/notepadconduit/notepad-factory.cc:69
+#: conduits/notepadconduit/notepad-factory.cpp:69
 #, fuzzy
 msgid "Configures the Notepad Conduit for KPilot"
 msgstr "Konfiguriše se provod KPilot-a za KNotes"
 
-#: conduits/notepadconduit/notepad-factory.cc:78
+#: conduits/notepadconduit/notepad-factory.cpp:78
 msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
 msgstr ""
 
-#: conduits/null/null-conduit.cc:63 conduits/null/null-factory.cc:63
+#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
 msgid "Null"
 msgstr "Nulti"
 
-#: conduits/null/null-conduit.cc:81
+#: conduits/null/null-conduit.cpp:81
 msgid "NULL conduit is programmed to fail."
 msgstr "Nulti provod je programiran da ne uspe."
 
-#: conduits/null/null-factory.cc:65
+#: conduits/null/null-factory.cpp:65
 msgid "Null Conduit for KPilot"
 msgstr "Nulti provod za KPilot-a"
 
-#: conduits/null/null-factory.cc:67
+#: conduits/null/null-factory.cpp:67
 msgid "Configures the Null Conduit for KPilot"
 msgstr "Podešava se nulti provod za KPilot-a"
 
-#: conduits/popmail/popmail-conduit.cc:89 conduits/popmail/setupDialog.cc:66
+#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
 #, fuzzy
 msgid "KMail"
 msgstr "Koristi KMail"
 
-#: conduits/popmail/popmail-conduit.cc:118
+#: conduits/popmail/popmail-conduit.cpp:118
 #, c-format
 msgid ""
 "_n: Sent one message\n"
@@ -859,167 +859,167 @@ msgstr ""
 "Poslate %n poruke\n"
 "Poslato %n poruka"
 
-#: conduits/popmail/popmail-conduit.cc:138
+#: conduits/popmail/popmail-conduit.cpp:138
 msgid "No mail was sent."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:145
+#: conduits/popmail/popmail-conduit.cpp:145
 msgid "No mail could be sent."
 msgstr ""
 
-#: conduits/popmail/popmail-conduit.cc:195
+#: conduits/popmail/popmail-conduit.cpp:195
 #, fuzzy
 msgid "Could not connect to DCOP server for the KMail connection."
 msgstr "Nisam mogao da se povežem na DCOP server za KMail-ovu vezu."
 
-#: conduits/popmail/popmail-conduit.cc:197
-#: conduits/popmail/popmail-conduit.cc:232
-#: conduits/popmail/popmail-conduit.cc:245
-#: conduits/popmail/popmail-conduit.cc:273
+#: conduits/popmail/popmail-conduit.cpp:197
+#: conduits/popmail/popmail-conduit.cpp:232
+#: conduits/popmail/popmail-conduit.cpp:245
+#: conduits/popmail/popmail-conduit.cpp:273
 msgid "Error Sending Mail"
 msgstr "Greška pri slanju pošte"
 
-#: conduits/popmail/popmail-conduit.cc:230
-#: conduits/popmail/popmail-conduit.cc:243
+#: conduits/popmail/popmail-conduit.cpp:230
+#: conduits/popmail/popmail-conduit.cpp:243
 msgid "Cannot open temporary file to store mail from Pilot in."
 msgstr ""
 "Ne mogu da otvorim privremeni datoteka u koji bi se skladištila pošta iz "
 "Pilot-a."
 
-#: conduits/popmail/popmail-conduit.cc:272
+#: conduits/popmail/popmail-conduit.cpp:272
 msgid "DCOP connection with KMail failed."
 msgstr "DCOP link sa KMail-om nije uspela."
 
-#: conduits/popmail/popmail-conduit.cc:397
+#: conduits/popmail/popmail-conduit.cpp:397
 #, fuzzy
 msgid "Cannot perform backup of mail database"
 msgstr "Ne mogu da otvorim bazu podataka"
 
-#: conduits/popmail/popmail-conduit.cc:405
+#: conduits/popmail/popmail-conduit.cpp:405
 msgid "Unable to open mail database on handheld"
 msgstr "Ne mogu da otvorim datoteka baze podataka na ručnom računaru"
 
-#: conduits/popmail/setupDialog.cc:68
+#: conduits/popmail/setupDialog.cpp:68
 msgid "Mail Conduit for KPilot"
 msgstr "Provod KPilot-a za poštu"
 
-#: conduits/popmail/setupDialog.cc:70
+#: conduits/popmail/setupDialog.cpp:70
 msgid "Configures the Mail Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za poštu"
 
-#: conduits/popmail/setupDialog.cc:78 conduits/vcalconduit/todo-setup.cc:53
-#: conduits/vcalconduit/todo-setup.cc:55 conduits/vcalconduit/todo-setup.cc:57
-#: conduits/vcalconduit/vcal-setup.cc:58 conduits/vcalconduit/vcal-setup.cc:60
-#: conduits/vcalconduit/vcal-setup.cc:62
+#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
+#: conduits/vcalconduit/todo-setup.cpp:55 conduits/vcalconduit/todo-setup.cpp:57
+#: conduits/vcalconduit/vcal-setup.cpp:58 conduits/vcalconduit/vcal-setup.cpp:60
+#: conduits/vcalconduit/vcal-setup.cpp:62
 msgid "Original Author"
 msgstr "Prvobitni autor"
 
-#: conduits/popmail/setupDialog.cc:80
+#: conduits/popmail/setupDialog.cpp:80
 msgid "POP3 code"
 msgstr "POP3 kôd"
 
-#: conduits/popmail/setupDialog.cc:82
+#: conduits/popmail/setupDialog.cpp:82
 msgid "SMTP support and redesign"
 msgstr "SMTP podrška i redizajniranje"
 
-#: conduits/recordconduit/factory.cc:64
+#: conduits/recordconduit/factory.cpp:64
 #, fuzzy
 msgid "Record Conduit"
 msgstr "Provod KPilot-a za VCal"
 
-#: conduits/recordconduit/factory.cc:66
+#: conduits/recordconduit/factory.cpp:66
 #, fuzzy
 msgid "Record Conduit for KPilot"
 msgstr "Provod KPilot-a za VCal"
 
-#: conduits/recordconduit/factory.cc:68
+#: conduits/recordconduit/factory.cpp:68
 #, fuzzy
 msgid "Configures the Record Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za VCal"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:163
-#: conduits/sysinfoconduit/sysinfo-setup.cc:112
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
 msgid "System Information"
 msgstr "Informacije o sistemu"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:254
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
 msgid "Password set"
 msgstr "Lozinka je postavljena"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:258
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
 msgid "No password set"
 msgstr "Lozinka nije postavljena"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:308
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
 msgid "No Cards available via pilot-link"
 msgstr "Nema dostupnih kartica preko pilot-ske veze"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:463
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
 msgid "No debug data"
 msgstr "Nema podataka za otklanjanje grešaka"
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:587
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
 msgid "Unable to open output file, using %1 instead."
 msgstr "Ne mogu da otvorim izlazni datoteka, koristim %1 umjesto njega."
 
-#: conduits/sysinfoconduit/sysinfo-conduit.cc:602
+#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
 #, c-format
 msgid "Handheld system information written to the file %1"
 msgstr "Informacije o sistemu ručnog računara zapisane su u datoteka %1"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:52
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
 #, fuzzy
 msgid "HardwareInfo"
 msgstr "Informacije o hardveru"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:53
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
 #, fuzzy
 msgid "UserInfo"
 msgstr "Korisnik je nepoznat"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:54
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
 #, fuzzy
 msgid "MemoryInfo"
 msgstr "Informacije o memoriji"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:55
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
 msgid "StorageInfo"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:56
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
 #, fuzzy
 msgid "DatabaseList"
 msgstr "Baze podataka"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:57
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
 msgid "RecordNumbers"
 msgstr ""
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:58
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
 #, fuzzy
 msgid "SyncInfo"
 msgstr "Sinhronizuj"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:59
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
 #, fuzzy
 msgid "KDEVersion"
 msgstr "Verzija PalmOS-a"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:60
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
 #, fuzzy
 msgid "PalmOSVersion"
 msgstr "Verzija PalmOS-a"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:61
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
 #, fuzzy
 msgid "DebugInformation"
 msgstr "Informacije o sistemu"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:95
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
 msgid "KPilot System Information conduit"
 msgstr "Provod KPilot-a za sistemske informacije"
 
-#: conduits/sysinfoconduit/sysinfo-setup.cc:97
+#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
 msgid ""
 "Retrieves System, Hardware, and User Info from the Handheld and stores them "
 "to a file."
@@ -1027,16 +1027,16 @@ msgstr ""
 "Dobavlja informacije o sistemu, hardveru i korisniku iz ručnog računara i "
 "snima ih u datoteka."
 
-#: conduits/timeconduit/time-conduit.cc:57
-#: conduits/timeconduit/time-setup.cc:68 kpilot/datebookWidget.cc:68
+#: conduits/timeconduit/time-conduit.cpp:57
+#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
 msgid "Time"
 msgstr "Vrijeme"
 
-#: conduits/timeconduit/time-conduit.cc:91
+#: conduits/timeconduit/time-conduit.cpp:91
 msgid "Setting the clock on the handheld"
 msgstr "Postavljam časovnik ručnog računara"
 
-#: conduits/timeconduit/time-conduit.cc:108
+#: conduits/timeconduit/time-conduit.cpp:108
 msgid ""
 "PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
 "time conduit..."
@@ -1044,58 +1044,58 @@ msgstr ""
 "PalmOS 3.25 i 3.3 ne podržavaju postavljanje sistemskog vremena. Preskačem "
 "vremenski provod..."
 
-#: conduits/timeconduit/time-setup.cc:48
+#: conduits/timeconduit/time-setup.cpp:48
 msgid "Time Synchronization Conduit for KPilot"
 msgstr "Provod KPilot-a za sinhronizaciju vremena"
 
-#: conduits/timeconduit/time-setup.cc:50
+#: conduits/timeconduit/time-setup.cpp:50
 msgid "Synchronizes the Time on the Handheld and the PC"
 msgstr "Sinhronizuje se vrijeme između ručnog računara i PC-ja"
 
-#: conduits/vcalconduit/cleanupstate.cc:62
+#: conduits/vcalconduit/cleanupstate.cpp:62
 msgid "Cleaning up ..."
 msgstr ""
 
-#: conduits/vcalconduit/cleanupstate.cc:91
+#: conduits/vcalconduit/cleanupstate.cpp:91
 msgid ""
 "An error occurred while uploading \"%1\". You can try to upload the "
 "temporary local file \"%2\" manually."
 msgstr ""
 
-#: conduits/vcalconduit/initstate.cc:59
+#: conduits/vcalconduit/initstate.cpp:59
 msgid "Initializing conduit ..."
 msgstr ""
 
-#: conduits/vcalconduit/pctohhstate.cc:71
+#: conduits/vcalconduit/pctohhstate.cpp:71
 msgid "Copying records to Pilot ..."
 msgstr ""
 
-#: conduits/vcalconduit/todo-conduit.cc:183
-#: conduits/vcalconduit/todo-setup.cc:45
+#: conduits/vcalconduit/todo-conduit.cpp:183
+#: conduits/vcalconduit/todo-setup.cpp:45
 msgid "To-do"
 msgstr "Zadatak"
 
-#: conduits/vcalconduit/todo-setup.cc:47
+#: conduits/vcalconduit/todo-setup.cpp:47
 #, fuzzy
 msgid "To-do Conduit for KPilot"
 msgstr "Provod KPilot-a za zadatke"
 
-#: conduits/vcalconduit/todo-setup.cc:49
+#: conduits/vcalconduit/todo-setup.cpp:49
 #, fuzzy
 msgid "Configures the To-do Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za zadatke"
 
-#: conduits/vcalconduit/todo-setup.cc:69
+#: conduits/vcalconduit/todo-setup.cpp:69
 #, fuzzy
 msgid "To-do Destination"
 msgstr "Odredište zadatka"
 
-#: conduits/vcalconduit/vcal-conduit.cc:178
-#: conduits/vcalconduit/vcal-setup.cc:70
+#: conduits/vcalconduit/vcal-conduit.cpp:178
+#: conduits/vcalconduit/vcal-setup.cpp:70
 msgid "Calendar"
 msgstr "Kalendar"
 
-#: conduits/vcalconduit/vcal-conduit.cc:222
+#: conduits/vcalconduit/vcal-conduit.cpp:222
 msgid ""
 "Event \"%1\" has a yearly recurrence other than by month, will change this "
 "to recurrence by month on handheld."
@@ -1103,12 +1103,12 @@ msgstr ""
 "Događaj '%1' ima godišnje ponavljanje, ali ne po mesecu. Ovo će biti "
 "promenjeno na ponavljanje po mesecu na ručnom računaru."
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:183
+#: conduits/vcalconduit/vcal-conduitbase.cpp:183
 #, fuzzy
 msgid "Could not open the calendar databases."
 msgstr "Nisam mogao da otvorim kalendarske baze podataka."
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:269
+#: conduits/vcalconduit/vcal-conduitbase.cpp:269
 #, fuzzy
 msgid ""
 "You selected to sync with an iCalendar file, but did not give a filename. "
@@ -1118,19 +1118,19 @@ msgstr ""
 "ime datoteke. Izaberite ispravno ime datoteke u dijalogu za podešavanje "
 "provoda."
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:291
-#: conduits/vcalconduit/vcal-conduitbase.cc:356
+#: conduits/vcalconduit/vcal-conduitbase.cpp:291
+#: conduits/vcalconduit/vcal-conduitbase.cpp:356
 #, c-format
 msgid "Using local time zone: %1"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:292
-#: conduits/vcalconduit/vcal-conduitbase.cc:357
+#: conduits/vcalconduit/vcal-conduitbase.cpp:292
+#: conduits/vcalconduit/vcal-conduitbase.cpp:357
 #, c-format
 msgid "Using non-local time zone: %1"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:321
+#: conduits/vcalconduit/vcal-conduitbase.cpp:321
 msgid ""
 "You chose to sync with the file \"%1\", which cannot be opened or created. "
 "Please make sure to supply a valid file name in the conduit's configuration "
@@ -1140,22 +1140,22 @@ msgstr ""
 "napravi. Provjerite da li ste naveli ispravno ime datoteke u dijalogu za "
 "podešavanje provoda. Obustavljam provod."
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:330
+#: conduits/vcalconduit/vcal-conduitbase.cpp:330
 msgid "Syncing with file \"%1\""
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:354
+#: conduits/vcalconduit/vcal-conduitbase.cpp:354
 msgid "Syncing with standard calendar resource."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:367
+#: conduits/vcalconduit/vcal-conduitbase.cpp:367
 msgid ""
 "Unable to initialize the calendar object. Please check the conduit's setup"
 msgstr ""
 "Ne mogu da inicijalizujem kalendarski objekat. Provjerite podešavanja "
 "provoda."
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:425
+#: conduits/vcalconduit/vcal-conduitbase.cpp:425
 #, fuzzy
 msgid ""
 "The following item was modified both on the Handheld and on your PC:\n"
@@ -1166,7 +1166,7 @@ msgstr ""
 "Stavka PC-ja:\n"
 "\t"
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:428
+#: conduits/vcalconduit/vcal-conduitbase.cpp:428
 #, fuzzy
 msgid ""
 "\n"
@@ -1174,107 +1174,107 @@ msgid ""
 "\t"
 msgstr "Faks na ručnom računaru:"
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:430
+#: conduits/vcalconduit/vcal-conduitbase.cpp:430
 msgid ""
 "\n"
 "\n"
 "Which entry do you want to keep? It will overwrite the other entry."
 msgstr ""
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:435
+#: conduits/vcalconduit/vcal-conduitbase.cpp:435
 msgid "Conflicting Entries"
 msgstr "Stavke u konfliktu"
 
-#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:309
+#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
 msgid "PC"
 msgstr ""
 
-#: conduits/vcalconduit/vcal-setup.cc:44
+#: conduits/vcalconduit/vcal-setup.cpp:44
 msgid "VCal Conduit for KPilot"
 msgstr "Provod KPilot-a za VCal"
 
-#: conduits/vcalconduit/vcal-setup.cc:46
+#: conduits/vcalconduit/vcal-setup.cpp:46
 msgid "Configures the VCal Conduit for KPilot"
 msgstr "Podešava se provod KPilot-a za VCal"
 
-#: conduits/vcalconduit/vcal-setup.cc:64
+#: conduits/vcalconduit/vcal-setup.cpp:64
 msgid "iCalendar port"
 msgstr "Port iCalendar-a"
 
-#: conduits/vcalconduit/vcal-setup.cc:66 kpilot/kpilot.cc:1038
-#: kpilot/kpilot.cc:1039
+#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
+#: kpilot/kpilot.cpp:1039
 msgid "Bugfixer"
 msgstr "Ispravljač grešaka"
 
-#: conduits/vcalconduit/vcal-setup.cc:69
+#: conduits/vcalconduit/vcal-setup.cpp:69
 msgid "Calendar Destination"
 msgstr "Odredište kalendara"
 
-#: kpilot/addressEditor.cc:59
+#: kpilot/addressEditor.cpp:59
 msgid "Address Editor"
 msgstr "Uređivač adresa"
 
-#: kpilot/addressEditor.cc:107
+#: kpilot/addressEditor.cpp:107
 msgid "Phone"
 msgstr "Telefon"
 
-#: kpilot/addressEditor.cc:180
+#: kpilot/addressEditor.cpp:180
 msgid "Last name:"
 msgstr "Prezime:"
 
-#: kpilot/addressEditor.cc:181
+#: kpilot/addressEditor.cpp:181
 msgid "First name:"
 msgstr "Ime:"
 
-#: kpilot/addressEditor.cc:182
+#: kpilot/addressEditor.cpp:182
 msgid "Title:"
 msgstr "Titula:"
 
-#: kpilot/addressEditor.cc:183
+#: kpilot/addressEditor.cpp:183
 msgid "Company:"
 msgstr "Firma:"
 
-#: kpilot/addressEditor.cc:192
+#: kpilot/addressEditor.cpp:192
 msgid "Address:"
 msgstr "Adresa:"
 
-#: kpilot/addressEditor.cc:193
+#: kpilot/addressEditor.cpp:193
 msgid "City:"
 msgstr "Grad:"
 
-#: kpilot/addressEditor.cc:194
+#: kpilot/addressEditor.cpp:194
 msgid "State:"
 msgstr "Država:"
 
-#: kpilot/addressEditor.cc:195
+#: kpilot/addressEditor.cpp:195
 msgid "Zip code:"
 msgstr "Poštanski broj:"
 
-#: kpilot/addressEditor.cc:196
+#: kpilot/addressEditor.cpp:196
 msgid "Country:"
 msgstr "Država:"
 
-#: kpilot/addressEditor.cc:197
+#: kpilot/addressEditor.cpp:197
 msgid "Custom 1:"
 msgstr "Posebno 1:"
 
-#: kpilot/addressEditor.cc:198
+#: kpilot/addressEditor.cpp:198
 msgid "Custom 2:"
 msgstr "Posebno 2:"
 
-#: kpilot/addressEditor.cc:199
+#: kpilot/addressEditor.cpp:199
 msgid "Custom 3:"
 msgstr "Posebno 3:"
 
-#: kpilot/addressEditor.cc:200
+#: kpilot/addressEditor.cpp:200
 msgid "Custom 4:"
 msgstr "Posebno 4:"
 
-#: kpilot/addressWidget.cc:187
+#: kpilot/addressWidget.cpp:187
 msgid "There are still %1 address editing windows open."
 msgstr "Još uvijek je otvoreno %1 prozora za uređivanje adresa."
 
-#: kpilot/addressWidget.cc:191
+#: kpilot/addressWidget.cpp:191
 #, c-format
 msgid ""
 "_n: There is still an address editing window open.\n"
@@ -1284,16 +1284,16 @@ msgstr ""
 "Još uvijek su otvorena %n prozora za uređivanje adresa.\n"
 "Još uvijek je otvoreno %n prozora za uređivanje adresa."
 
-#: kpilot/addressWidget.cc:224
+#: kpilot/addressWidget.cpp:224
 msgid "<qt>Select the category of addresses to display here.</qt>"
 msgstr "<qt>Izaberite kategoriju adresa koje treba da se prikažu ovdje.</qt>"
 
-#: kpilot/addressWidget.cc:226 kpilot/memoWidget.cc:238
-#: kpilot/todoWidget.cc:220
+#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
+#: kpilot/todoWidget.cpp:220
 msgid "Category:"
 msgstr "Kategorija:"
 
-#: kpilot/addressWidget.cc:237
+#: kpilot/addressWidget.cpp:237
 msgid ""
 "<qt>This list displays all the addresses in the selected category. Click on "
 "one to display it to the right.</qt>"
@@ -1301,74 +1301,74 @@ msgstr ""
 "<qt>Ova lista prikazuje sve adrese u selektovanoj kategoriji. Kliknite na "
 "neku od njih da biste je prikazali desno.</qt>"
 
-#: kpilot/addressWidget.cc:241
+#: kpilot/addressWidget.cpp:241
 msgid "Address info:"
 msgstr "Informacije o adresi:"
 
-#: kpilot/addressWidget.cc:251 kpilot/todoWidget.cc:257
+#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
 msgid "Edit Record..."
 msgstr "Uredi slog..."
 
-#: kpilot/addressWidget.cc:255
+#: kpilot/addressWidget.cpp:255
 msgid "<qt>You can edit an address when it is selected.</qt>"
 msgstr "<qt>Možete uređivati adresu kada je izabrana.</qt>"
 
-#: kpilot/addressWidget.cc:256 kpilot/todoWidget.cc:263
+#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
 msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:259 kpilot/todoWidget.cc:266
+#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
 msgid "New Record..."
 msgstr "Novi slog..."
 
-#: kpilot/addressWidget.cc:263
+#: kpilot/addressWidget.cpp:263
 msgid "<qt>Add a new address to the address book.</qt>"
 msgstr "<qt>Dodaje se nova adresa u adresar.</qt>"
 
-#: kpilot/addressWidget.cc:264
+#: kpilot/addressWidget.cpp:264
 msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:269 kpilot/todoWidget.cc:275
+#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
 msgid "Delete Record"
 msgstr "Obriši slog"
 
-#: kpilot/addressWidget.cc:274
+#: kpilot/addressWidget.cpp:274
 msgid "<qt>Delete the selected address from the address book.</qt>"
 msgstr "<qt>Briše se izabrana adresa iz adresara.</qt>"
 
-#: kpilot/addressWidget.cc:275 kpilot/memoWidget.cc:285
-#: kpilot/todoWidget.cc:281
+#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
+#: kpilot/todoWidget.cpp:281
 msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/addressWidget.cc:277
+#: kpilot/addressWidget.cpp:277
 msgid ""
 "_: Export addresses to file\n"
 "Export..."
 msgstr ""
 
-#: kpilot/addressWidget.cc:281
+#: kpilot/addressWidget.cpp:281
 #, fuzzy
 msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
 msgstr ""
 "<qt>Ova lista prikazuje sve adrese u selektovanoj kategoriji. Kliknite na "
 "neku od njih da biste je prikazali desno.</qt>"
 
-#: kpilot/addressWidget.cc:393 lib/pilotMemo.cc:132
+#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
 msgid "[unknown]"
 msgstr "[nepoznato]"
 
-#: kpilot/addressWidget.cc:435 kpilot/todoWidget.cc:363
+#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
 msgid "Cannot edit new records until HotSynced with Pilot."
 msgstr "Novi slogovi ne mogu da se uređuju dok se ne sinhronizuju sa Pilot-om."
 
-#: kpilot/addressWidget.cc:437 kpilot/addressWidget.cc:574
-#: kpilot/todoWidget.cc:365 kpilot/todoWidget.cc:498
+#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
+#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
 msgid "HotSync Required"
 msgstr "Morate uraditi vruću sinhronizaciju"
 
-#: kpilot/addressWidget.cc:480
+#: kpilot/addressWidget.cpp:480
 #, fuzzy
 msgid ""
 "You cannot add addresses to the address book until you have done a HotSync "
@@ -1377,60 +1377,60 @@ msgstr ""
 "Ne možete dodavati adrese u adresar dok bar jednom ne uradite vruću "
 "sinhronizaciju da biste dobavili izgled baze podataka iz vašeg Pilot-a."
 
-#: kpilot/addressWidget.cc:483
+#: kpilot/addressWidget.cpp:483
 #, fuzzy
 msgid "Cannot Add New Address"
 msgstr "Ne mogu da dodam novu adresu"
 
-#: kpilot/addressWidget.cc:572 kpilot/todoWidget.cc:496
+#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
 msgid "New records cannot be deleted until HotSynced with pilot."
 msgstr "Novi zadaci ne mogu da se obrišu dok se ne sinhronizuju sa Pilot-om."
 
-#: kpilot/addressWidget.cc:579 kpilot/todoWidget.cc:503
+#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
 msgid "Delete currently selected record?"
 msgstr "Da li da obrišem trenutno izabrani slog?"
 
-#: kpilot/addressWidget.cc:580 kpilot/todoWidget.cc:504
+#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
 msgid "Delete Record?"
 msgstr "Da li da obrišem slog?"
 
-#: kpilot/addressWidget.cc:677
+#: kpilot/addressWidget.cpp:677
 msgid "Export All Addresses"
 msgstr ""
 
-#: kpilot/addressWidget.cc:678
+#: kpilot/addressWidget.cpp:678
 #, c-format
 msgid "Export Address Category %1"
 msgstr ""
 
-#: kpilot/addressWidget.cc:696
+#: kpilot/addressWidget.cpp:696
 #, fuzzy
 msgid "The file <i>%1</i> exists. Overwrite?"
 msgstr ""
 "<qt>Tekstualni datoteka <em>%1</em> već postoji. Da li da ga prebrišem?</qt>"
 
-#: kpilot/addressWidget.cc:697
+#: kpilot/addressWidget.cpp:697
 #, fuzzy
 msgid "Overwrite File?"
 msgstr "&Prebriši"
 
-#: kpilot/addressWidget.cc:710
+#: kpilot/addressWidget.cpp:710
 msgid "The file <i>%1</i> could not be opened for writing."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:252
+#: kpilot/conduitConfigDialog.cpp:252
 msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
 msgstr "<qt>Ovaj provod deluje pokvareno i ne može da se podesi.</qt>"
 
-#: kpilot/conduitConfigDialog.cc:260
+#: kpilot/conduitConfigDialog.cpp:260
 msgid "<qt>This is an old-style conduit.</qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:264
+#: kpilot/conduitConfigDialog.cpp:264
 msgid "Configure..."
 msgstr "Podesi..."
 
-#: kpilot/conduitConfigDialog.cc:274
+#: kpilot/conduitConfigDialog.cpp:274
 msgid ""
 "<qt><i>Conduits</i> are external (possibly third-party) programs that "
 "perform synchronization actions. They may have individual configurations. "
@@ -1438,7 +1438,7 @@ msgid ""
 "</qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:282
+#: kpilot/conduitConfigDialog.cpp:282
 msgid ""
 "<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
 "your hardware and the way KPilot should display your data. For the basic "
@@ -1450,92 +1450,92 @@ msgid ""
 "Select a conduit to configure it.</p></qt>"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:295
+#: kpilot/conduitConfigDialog.cpp:295
 #, fuzzy
 msgid "Configuration Wizard"
 msgstr "Dijalog za podešavanje provoda"
 
-#: kpilot/conduitConfigDialog.cc:369
+#: kpilot/conduitConfigDialog.cpp:369
 msgid "About KPilot. Credits."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:372
+#: kpilot/conduitConfigDialog.cpp:372
 #, fuzzy
 msgid "Conduits"
 msgstr "Provod"
 
-#: kpilot/conduitConfigDialog.cc:374
+#: kpilot/conduitConfigDialog.cpp:374
 #, fuzzy
 msgid "General Setup"
 msgstr "Opšte"
 
-#: kpilot/conduitConfigDialog.cc:382
+#: kpilot/conduitConfigDialog.cpp:382
 msgid "General setup of KPilot (User name, port, general sync settings)"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:384
+#: kpilot/conduitConfigDialog.cpp:384
 msgid "Actions for HotSync with individual configuration."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:395 kpilot/kpilotConfigDialog.cc:470
+#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
 msgid "Startup and Exit"
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:395
+#: kpilot/conduitConfigDialog.cpp:395
 msgid "Behavior at startup and exit."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:396 kpilot/kpilotConfigDialog.cc:418
+#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
 #: kpilot/kpilotConfigDialog_viewers.ui:33
 #, fuzzy, no-c-format
 msgid "Viewers"
 msgstr "&Prikazivači"
 
-#: kpilot/conduitConfigDialog.cc:396
+#: kpilot/conduitConfigDialog.cpp:396
 msgid "Viewer settings."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:397 kpilot/kpilotConfigDialog.cc:328
-#: lib/syncAction.cc:208
+#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
+#: lib/syncAction.cpp:208
 #, fuzzy
 msgid "Backup"
 msgstr "&Napravi rezervnu kopiju"
 
-#: kpilot/conduitConfigDialog.cc:397
+#: kpilot/conduitConfigDialog.cpp:397
 msgid "Special settings for backup."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:398 kpilot/kpilot.cc:261 kpilot/kpilot.cc:263
-#: kpilot/kpilot.cc:515 kpilot/kpilotConfigDialog.cc:242 lib/syncAction.cc:204
+#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261 kpilot/kpilot.cpp:263
+#: kpilot/kpilot.cpp:515 kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
 msgid "HotSync"
 msgstr "Vruća sinhronizacija"
 
-#: kpilot/conduitConfigDialog.cc:398
+#: kpilot/conduitConfigDialog.cpp:398
 msgid "Special behavior during HotSync."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:399 kpilot/kpilotConfigDialog.cc:102
+#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
 #, fuzzy
 msgid "Device"
 msgstr "Opcije uređaja"
 
-#: kpilot/conduitConfigDialog.cc:399
+#: kpilot/conduitConfigDialog.cpp:399
 msgid "Hardware settings and startup and exit options."
 msgstr ""
 
-#: kpilot/conduitConfigDialog.cc:542
+#: kpilot/conduitConfigDialog.cpp:542
 #, fuzzy
 msgid ""
 "<qt>This is an internal action which has no configuration options. The "
 "action's description is: <i>%1</i> </qt>"
 msgstr "<qt>Ovo je interni provod koji nema postavki za podešavanje.</qt>"
 
-#: kpilot/conduitConfigDialog.cc:722
+#: kpilot/conduitConfigDialog.cpp:722
 #, fuzzy
 msgid "KPilot Setup"
 msgstr "KPilotTest"
 
-#: kpilot/conduitConfigDialog.cc:735
+#: kpilot/conduitConfigDialog.cpp:735
 msgid ""
 "<qt>No library could be found for the conduit %1. This means that the "
 "conduit was not installed properly.</qt>"
@@ -1543,11 +1543,11 @@ msgstr ""
 "<qt>Nije mogla da se pronađe biblioteka za provod %1. Ovo znači da provod "
 "nije ispravno instaliran.</qt>"
 
-#: kpilot/conduitConfigDialog.cc:745 kpilot/conduitConfigDialog.cc:762
+#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
 msgid "Conduit Error"
 msgstr "Greška provoda"
 
-#: kpilot/conduitConfigDialog.cc:752
+#: kpilot/conduitConfigDialog.cpp:752
 msgid ""
 "<qt>There was a problem loading the library for the conduit %1. This means "
 "that the conduit was not installed properly.</qt>"
@@ -1555,35 +1555,35 @@ msgstr ""
 "<qt>Došlo je do problema pri učitavanju biblioteke za provod %1. Ovo znači "
 "da provod nije ispravno instaliran.</qt>"
 
-#: kpilot/datebookWidget.cc:58 kpilot/dbviewerWidget.cc:109
+#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
 msgid "&Add..."
 msgstr "&Dodaj..."
 
-#: kpilot/datebookWidget.cc:61 kpilot/dbviewerWidget.cc:111
+#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
 msgid "&Edit..."
 msgstr "&Uredi..."
 
-#: kpilot/datebookWidget.cc:64
+#: kpilot/datebookWidget.cpp:64
 msgid "&Delete..."
 msgstr "&Obriši..."
 
-#: kpilot/datebookWidget.cc:69
+#: kpilot/datebookWidget.cpp:69
 msgid "Al"
 msgstr "Sve"
 
-#: kpilot/datebookWidget.cc:70
+#: kpilot/datebookWidget.cpp:70
 msgid "Rec"
 msgstr "Slog"
 
-#: kpilot/datebookWidget.cc:71 kpilot/listCat.cc:85
+#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
 msgid "Description"
 msgstr "Opis"
 
-#: kpilot/dbAppInfoEditor.cc:46
+#: kpilot/dbAppInfoEditor.cpp:46
 msgid "Edit AppInfo Block"
 msgstr "Uredi info-blok programa"
 
-#: kpilot/dbAppInfoEditor.cc:68
+#: kpilot/dbAppInfoEditor.cpp:68
 msgid ""
 "To view the Application info block data, please install a hex editor (e.g. "
 "khexedit from tdeutils)."
@@ -1591,15 +1591,15 @@ msgstr ""
 "Da biste gledali podatke info bloka programa, instalirajte neki "
 "heksadecimalni editor (npr. khexedit)"
 
-#: kpilot/dbAppInfoEditor.cc:86
+#: kpilot/dbAppInfoEditor.cpp:86
 msgid "Changing the AppInfo block isn't yet supported by KPilot!"
 msgstr ""
 
-#: kpilot/dbFlagsEditor.cc:45
+#: kpilot/dbFlagsEditor.cpp:45
 msgid "Edit Database Flags"
 msgstr "Uredi zastavice baze podataka"
 
-#: kpilot/dbFlagsEditor.cc:60
+#: kpilot/dbFlagsEditor.cpp:60
 msgid ""
 "Changing the database flags might corrupt the whole database, or make the "
 "data unusable. Do not change the values unless you are absolutely sure you "
@@ -1613,22 +1613,22 @@ msgstr ""
 "\n"
 "Želite li zaista da dodijelite ove nove zastavice?"
 
-#: kpilot/dbFlagsEditor.cc:60
+#: kpilot/dbFlagsEditor.cpp:60
 #, fuzzy
 msgid "Changing Database Flags"
 msgstr "Menjam zastavice baze podataka"
 
-#: kpilot/dbFlagsEditor.cc:60 kpilot/dbRecordEditor.cc:75
+#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
 #, fuzzy
 msgid "Assign"
 msgstr "Asistent"
 
-#: kpilot/dbRecordEditor.cc:53
+#: kpilot/dbRecordEditor.cpp:53
 #, fuzzy
 msgid "Edit Record"
 msgstr "Uredi slog..."
 
-#: kpilot/dbRecordEditor.cc:75
+#: kpilot/dbRecordEditor.cpp:75
 msgid ""
 "Changing the record data and flags might corrupt the whole record, or even "
 "make the database unusable. Do not change the values unless you are "
@@ -1642,57 +1642,57 @@ msgstr ""
 "\n"
 "Želite li zaista da dodijelite ove nove zastavice?"
 
-#: kpilot/dbRecordEditor.cc:75
+#: kpilot/dbRecordEditor.cpp:75
 #, fuzzy
 msgid "Changing Record"
 msgstr "Menjam slog"
 
-#: kpilot/dbRecordEditor.cc:106 kpilot/dbRecordEditor_base.ui:24
+#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
 #, no-c-format
 msgid "Record index:"
 msgstr "Indeks slogova:"
 
-#: kpilot/dbRecordEditor.cc:107 kpilot/dbRecordEditor_base.ui:32
+#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
 #, no-c-format
 msgid "Record ID:"
 msgstr "Id. sloga"
 
-#: kpilot/dbRecordEditor.cc:108 kpilot/dbRecordEditor.cc:109
+#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
 #: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
 #: kpilot/todoEditor_base.ui:99
 #, no-c-format
 msgid "1"
 msgstr "1"
 
-#: kpilot/dbRecordEditor.cc:110 kpilot/dbRecordEditor_base.ui:70
+#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
 #, no-c-format
 msgid "Flags"
 msgstr "Zastavice"
 
-#: kpilot/dbRecordEditor.cc:111 kpilot/dbRecordEditor_base.ui:81
+#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
 #, no-c-format
 msgid "&Dirty"
 msgstr "&Prljav"
 
-#: kpilot/dbRecordEditor.cc:112
+#: kpilot/dbRecordEditor.cpp:112
 msgid "De&leted"
 msgstr "&Obrisan"
 
-#: kpilot/dbRecordEditor.cc:113
+#: kpilot/dbRecordEditor.cpp:113
 msgid "&Busy"
 msgstr "&Zauzet"
 
-#: kpilot/dbRecordEditor.cc:114 kpilot/dbRecordEditor_base.ui:105
+#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
 #, no-c-format
 msgid "&Secret"
 msgstr "&Tajan"
 
-#: kpilot/dbRecordEditor.cc:115 kpilot/dbRecordEditor_base.ui:113
+#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
 #, no-c-format
 msgid "&Archived"
 msgstr "&Arhiviran"
 
-#: kpilot/dbRecordEditor.cc:193
+#: kpilot/dbRecordEditor.cpp:193
 msgid ""
 "To view and edit the record data, please install a hex editor (e.g. "
 "kbytesedit from tdeutils)."
@@ -1700,7 +1700,7 @@ msgstr ""
 "Za pregled i izmjenu snimljenih podataka, instalirajte neki heksadecimalni "
 "editor (npr. khexedit)"
 
-#: kpilot/dbSelectionDialog.cc:108
+#: kpilot/dbSelectionDialog.cpp:108
 msgid ""
 "This is a database that exists on the device. It was not added manually, so "
 "it can not removed from the list."
@@ -1708,95 +1708,95 @@ msgstr ""
 "Ovo je baza podataka koja postoji na uređaju. Nije ručno dodata, tako da se "
 "ne može ukloniti sa liste."
 
-#: kpilot/dbSelectionDialog.cc:108
+#: kpilot/dbSelectionDialog.cpp:108
 msgid "Database on Device"
 msgstr "Baza podataka na uređaju"
 
-#: kpilot/dbSelectionDialog.cc:119
+#: kpilot/dbSelectionDialog.cpp:119
 msgid "You need to select a database to delete in the list."
 msgstr "Morate izabrati iz liste bazu podatka koju želite da obrišete."
 
-#: kpilot/dbSelectionDialog.cc:119
+#: kpilot/dbSelectionDialog.cpp:119
 msgid "No Database Selected"
 msgstr "Nema izabrane baze podataka"
 
-#: kpilot/dbviewerWidget.cc:84
+#: kpilot/dbviewerWidget.cpp:84
 msgid "All Databases"
 msgstr "Sve baze podataka"
 
-#: kpilot/dbviewerWidget.cc:85
+#: kpilot/dbviewerWidget.cpp:85
 msgid "Only Applications (*.prc)"
 msgstr "Samo programi (*.prc)"
 
-#: kpilot/dbviewerWidget.cc:86
+#: kpilot/dbviewerWidget.cpp:86
 msgid "Only Databases (*.pdb)"
 msgstr "Samo baze podataka (*.pdb)"
 
-#: kpilot/dbviewerWidget.cc:93
+#: kpilot/dbviewerWidget.cpp:93
 #, fuzzy
 msgid "General Database &Information"
 msgstr "Ošpte informacije o &bazi podataka..."
 
-#: kpilot/dbviewerWidget.cc:95
+#: kpilot/dbviewerWidget.cpp:95
 msgid "&Application Info Block (Categories etc.)"
 msgstr "Informacioni blok &programa (kategorije, itd.)"
 
-#: kpilot/dbviewerWidget.cc:101
+#: kpilot/dbviewerWidget.cpp:101
 msgid "Rec. Nr."
 msgstr "Broj sloga"
 
-#: kpilot/dbviewerWidget.cc:102
+#: kpilot/dbviewerWidget.cpp:102
 msgid "Length"
 msgstr "Dužina"
 
-#: kpilot/dbviewerWidget.cc:103
+#: kpilot/dbviewerWidget.cpp:103
 msgid "Record ID"
 msgstr "Id. sloga"
 
-#: kpilot/dbviewerWidget.cc:189
+#: kpilot/dbviewerWidget.cpp:189
 #, c-format
 msgid "<B>Warning:</B> Cannot read database file %1."
 msgstr "<B>Upozorenje:</B> Fajl baze podataka %1 ne može da se pročita."
 
-#: kpilot/dbviewerWidget.cc:194
+#: kpilot/dbviewerWidget.cpp:194
 msgid "<B>Database:</B> %1, %2 records<BR>"
 msgstr "<B>Baza podataka:</B> %1, %2 slogova<BR>"
 
-#: kpilot/dbviewerWidget.cc:203
+#: kpilot/dbviewerWidget.cpp:203
 msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
 msgstr "<B>Vrsta:</B> %1, <B>Kreator:</B> %2<BR><BR>"
 
-#: kpilot/dbviewerWidget.cc:246 kpilot/dbviewerWidget.cc:253
+#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
 #, c-format
 msgid "<B>Warning:</B> Cannot read application file %1."
 msgstr "<B>Upozorenje:</B> Programski datoteka %1 ne može da se pročita."
 
-#: kpilot/dbviewerWidget.cc:260
+#: kpilot/dbviewerWidget.cpp:260
 msgid "<B>Application:</B> %1<BR><BR>"
 msgstr "<B>Program:</B> %1<BR><BR>"
 
-#: kpilot/dbviewerWidget.cc:267
+#: kpilot/dbviewerWidget.cpp:267
 msgid "Created: %1<BR>"
 msgstr "Napravljen: %1<BR>"
 
-#: kpilot/dbviewerWidget.cc:270
+#: kpilot/dbviewerWidget.cpp:270
 msgid "Modified: %1<BR>"
 msgstr "Izmenjen: %1<BR>"
 
-#: kpilot/dbviewerWidget.cc:273
+#: kpilot/dbviewerWidget.cpp:273
 msgid "Backed up: %1<BR>"
 msgstr "Napravljena rezervna kopija: %1<BR>"
 
-#: kpilot/dbviewerWidget.cc:353
+#: kpilot/dbviewerWidget.cpp:353
 msgid "You must select a record for editing."
 msgstr "Morate da izaberete slog za uređivanje."
 
-#: kpilot/dbviewerWidget.cc:353
+#: kpilot/dbviewerWidget.cpp:353
 #, fuzzy
 msgid "No Record Selected"
 msgstr "Nema izabranog sloga"
 
-#: kpilot/dbviewerWidget.cc:366
+#: kpilot/dbviewerWidget.cpp:366
 msgid ""
 "<qt>Do you really want to delete the selected record? This cannot be undone."
 "<br><br>Delete record?<qt>"
@@ -1804,37 +1804,37 @@ msgstr ""
 "<qt>Želite li zaista da obrišete izabrani slog? Ova operacija ne može "
 "kasnije da se poništi.<br><br>Da li da obrišem slog?<qt>"
 
-#: kpilot/dbviewerWidget.cc:366
+#: kpilot/dbviewerWidget.cpp:366
 #, fuzzy
 msgid "Deleting Record"
 msgstr "Brišem slog"
 
-#: kpilot/fileInstallWidget.cc:71
+#: kpilot/fileInstallWidget.cpp:71
 msgid "Files to install:"
 msgstr "Fajlovi za instaliranje:"
 
-#: kpilot/fileInstallWidget.cc:77
+#: kpilot/fileInstallWidget.cpp:77
 msgid "Add File..."
 msgstr "Dodaj datoteka..."
 
-#: kpilot/fileInstallWidget.cc:81
+#: kpilot/fileInstallWidget.cpp:81
 msgid "<qt>Choose a file to add to the list of files to install.</qt>"
 msgstr ""
 "<qt>Izaberite datoteka koji želite da dodate u listu fajlova za instaliranje."
 "</qt>"
 
-#: kpilot/fileInstallWidget.cc:83
+#: kpilot/fileInstallWidget.cpp:83
 msgid "Clear List"
 msgstr "Isprazni listu"
 
-#: kpilot/fileInstallWidget.cc:87
+#: kpilot/fileInstallWidget.cpp:87
 msgid ""
 "<qt>Clear the list of files to install. No files will be installed.</qt>"
 msgstr ""
 "<qt>Prazni se lista fajlova za instaliranje. Nijedan datoteka neće biti "
 "instaliran.</qt>"
 
-#: kpilot/fileInstallWidget.cc:95
+#: kpilot/fileInstallWidget.cpp:95
 msgid ""
 "<qt>This lists files that will be installed on the Pilot during the next "
 "HotSync. Drag files here or use the Add button.</qt>"
@@ -1843,90 +1843,90 @@ msgstr ""
 "vruće sinhronizacije. Prevucite datoteke ovdje ili koristite dugme Dodaj.</"
 "qt>"
 
-#: kpilot/fileInstallWidget.cc:217
+#: kpilot/fileInstallWidget.cpp:217
 msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:291
+#: kpilot/fileInstallWidget.cpp:291
 msgid ""
 "_: Delete a single file item\n"
 "Delete"
 msgstr ""
 
-#: kpilot/fileInstallWidget.cc:294
+#: kpilot/fileInstallWidget.cpp:294
 #, fuzzy
 msgid "Delete selected files"
 msgstr "Briše se izabrana beleška."
 
-#: kpilot/fileInstaller.cc:109
+#: kpilot/fileInstaller.cpp:109
 #, fuzzy, c-format
 msgid "Cannot install %1"
 msgstr "Ne mogu da instaliram datoteka '%1'!"
 
-#: kpilot/fileInstaller.cc:110
+#: kpilot/fileInstaller.cpp:110
 msgid ""
 "Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
 "file installer."
 msgstr ""
 
-#: kpilot/hotSync.cc:339
+#: kpilot/hotSync.cpp:339
 #, c-format
 msgid "Backup directory: %1."
 msgstr ""
 
-#: kpilot/hotSync.cc:353
+#: kpilot/hotSync.cpp:353
 msgid "Full backup started."
 msgstr "Započeto je pravljenje pune rezervne kopije."
 
-#: kpilot/hotSync.cc:358
+#: kpilot/hotSync.cpp:358
 msgid "Fast backup started"
 msgstr "Započeto je pravljenje brze rezervne kopije."
 
-#: kpilot/hotSync.cc:387
+#: kpilot/hotSync.cpp:387
 msgid "Exiting on cancel."
 msgstr "Obustavljam na zahtev."
 
-#: kpilot/hotSync.cc:399
+#: kpilot/hotSync.cpp:399
 msgid "Full backup complete."
 msgstr "Pravljenje pune rezervne kopije je završeno."
 
-#: kpilot/hotSync.cc:403
+#: kpilot/hotSync.cpp:403
 msgid "Fast backup complete."
 msgstr "Pravljenje brze rezervne kopije je završeno."
 
-#: kpilot/hotSync.cc:419
+#: kpilot/hotSync.cpp:419
 #, c-format
 msgid "Backing up: %1"
 msgstr "Pravim rezervnu kopiju: %1"
 
-#: kpilot/hotSync.cc:447
+#: kpilot/hotSync.cpp:447
 #, c-format
 msgid "Skipping %1"
 msgstr ""
 
-#: kpilot/hotSync.cc:482
+#: kpilot/hotSync.cpp:482
 msgid "Backup of %1 failed.\n"
 msgstr "Pravljenje rezervne kopije za %1 nije uspelo.\n"
 
-#: kpilot/hotSync.cc:540
+#: kpilot/hotSync.cpp:540
 #, fuzzy
 msgid "... OK.\n"
 msgstr " .. U redu\n"
 
-#: kpilot/hotSync.cc:548
+#: kpilot/hotSync.cpp:548
 #, fuzzy
 msgid "Backup failed."
 msgstr "Pravljenje rezervne kopije za %1 nije uspelo.\n"
 
-#: kpilot/hotSync.cc:607
+#: kpilot/hotSync.cpp:607
 msgid "[File Installer]"
 msgstr "[Instalator fajlova]"
 
-#: kpilot/hotSync.cc:612
+#: kpilot/hotSync.cpp:612
 msgid "No Files to install"
 msgstr "Nema fajlova za instaliranje"
 
-#: kpilot/hotSync.cc:624
+#: kpilot/hotSync.cpp:624
 #, c-format
 msgid ""
 "_n: Installing one file\n"
@@ -1936,44 +1936,44 @@ msgstr ""
 "Instaliram %n datoteke\n"
 "Instaliram %n fajlova"
 
-#: kpilot/hotSync.cc:649
+#: kpilot/hotSync.cpp:649
 msgid "Done Installing Files"
 msgstr "Instaliranje fajlova je završeno"
 
-#: kpilot/hotSync.cc:663
+#: kpilot/hotSync.cpp:663
 #, c-format
 msgid "Installing %1"
 msgstr "Instaliram %1"
 
-#: kpilot/hotSync.cc:686
+#: kpilot/hotSync.cpp:686
 #, fuzzy
 msgid "Cannot install file &quot;%1&quot;."
 msgstr "Ne mogu da instaliram datoteka '%1'!"
 
-#: kpilot/hotSync.cc:713 kpilot/hotSync.cc:723
+#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
 #, fuzzy
 msgid "Unable to open file &quot;%1&quot;."
 msgstr "Ne mogu da otvorim datoteka '%1'!"
 
-#: kpilot/hotSync.cc:732
+#: kpilot/hotSync.cpp:732
 #, fuzzy
 msgid "Unable to read file &quot;%1&quot;."
 msgstr "Ne mogu da otvorim datoteka '%1'!"
 
-#: kpilot/hotSync.cc:748
+#: kpilot/hotSync.cpp:748
 msgid ""
 "The database in &quot;%1&quot; has a resource name that is longer than 31 "
 "characters. This suggests a bug in the tool used to create the database. "
 "KPilot cannot install this database."
 msgstr ""
 
-#: kpilot/hotSync.cc:806
+#: kpilot/hotSync.cpp:806
 msgid ""
 "_: A common name\n"
 "John Doe"
 msgstr "Pera Perić"
 
-#: kpilot/hotSync.cc:808
+#: kpilot/hotSync.cpp:808
 #, fuzzy
 msgid ""
 "<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
@@ -1983,11 +1983,11 @@ msgstr ""
 "<i>trebalo</i> da bude postavljena. Da li da ih KPilot postavi na "
 "podrazumijevanu vrijednost (<i>%1</i>)?</qt>"
 
-#: kpilot/hotSync.cc:814 kpilot/hotSync.cc:831 kpilot/hotSync.cc:855
+#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
 msgid "User Unknown"
 msgstr "Korisnik je nepoznat"
 
-#: kpilot/hotSync.cc:826
+#: kpilot/hotSync.cpp:826
 #, fuzzy
 msgid ""
 "<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
@@ -1996,7 +1996,7 @@ msgstr ""
 "<qt>Pilot ima postavljeno korisničko ime (<i>%1</i>), ali ga KPilot nema. Da "
 "li da i KPilot koristi ovo korisničko ime ubuduće?"
 
-#: kpilot/hotSync.cc:844
+#: kpilot/hotSync.cpp:844
 #, fuzzy
 msgid ""
 "KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
@@ -2005,14 +2005,14 @@ msgstr ""
 "<qt>KPilot ima postavljeno korisničko ime (<i>%1</i>), ali ga Pilot nema. Da "
 "li da se ovo korisničko ime postavi i na Pilot-u?"
 
-#: kpilot/hotSync.cc:848
+#: kpilot/hotSync.cpp:848
 msgid ""
 "<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
 "should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
 "stop this sync.)"
 msgstr ""
 
-#: kpilot/hotSync.cc:877
+#: kpilot/hotSync.cpp:877
 #, fuzzy
 msgid ""
 "<qt>The handheld thinks that the username is %1; however, KPilot says you "
@@ -2025,28 +2025,28 @@ msgstr ""
 "Ako kliknete na Otkaži, sinhronizacija će se nastaviti, ali korisnička imena "
 "neće biti promenjena."
 
-#: kpilot/hotSync.cc:887
+#: kpilot/hotSync.cpp:887
 msgid "User Mismatch"
 msgstr "Neslaganje korisničkih imena"
 
-#: kpilot/hotSync.cc:890
+#: kpilot/hotSync.cpp:890
 msgid "Use KPilot Name"
 msgstr "Koristi KPilot-ovo ime"
 
-#: kpilot/hotSync.cc:891
+#: kpilot/hotSync.cpp:891
 msgid "Use Handheld Name"
 msgstr "Koristi ime sa ručnog računara"
 
-#: kpilot/hotSync.cc:997
+#: kpilot/hotSync.cpp:997
 #, fuzzy
 msgid "Restore directory does not exist."
 msgstr " Port ne postoji."
 
-#: kpilot/hotSync.cc:998 kpilot/hotSync.cc:1013
+#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
 msgid "Restore not performed."
 msgstr "Vraćanje nije odrađeno."
 
-#: kpilot/hotSync.cc:1003
+#: kpilot/hotSync.cpp:1003
 msgid ""
 "<qt>Are you sure you want to completely restore your Pilot from the backup "
 "directory (<i>%1</i>)? This will erase any information you currently have on "
@@ -2056,77 +2056,77 @@ msgstr ""
 "kojem je rezervna kopija (<i>%1</i>)? Ovim će se obrisati sve informacije "
 "koje se trenutno nalaze na Pilot-u.</qt>"
 
-#: kpilot/hotSync.cc:1008
+#: kpilot/hotSync.cpp:1008
 msgid "Restore Pilot"
 msgstr "Povrati Pilot-a"
 
-#: kpilot/hotSync.cc:1010
+#: kpilot/hotSync.cpp:1010
 msgid "Restore <i>not</i> performed."
 msgstr "Vraćanje <i>nije</i> odrađeno."
 
-#: kpilot/hotSync.cc:1012
+#: kpilot/hotSync.cpp:1012
 #, fuzzy
 msgid "Canceled by user."
 msgstr "Sinhronozacija prekinuta od strane korisnika."
 
-#: kpilot/hotSync.cc:1024 kpilot/hotSync.cc:1094
+#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
 msgid "Restoring %1..."
 msgstr "Vraćam %1..."
 
-#: kpilot/hotSync.cc:1044
+#: kpilot/hotSync.cpp:1044
 msgid "File '%1' cannot be read."
 msgstr ""
 
-#: kpilot/hotSync.cc:1071
+#: kpilot/hotSync.cpp:1071
 msgid "OK."
 msgstr "U redu."
 
-#: kpilot/hotSync.cc:1085
+#: kpilot/hotSync.cpp:1085
 #, fuzzy
 msgid "Restore incomplete."
 msgstr "Povrati Pilot-a"
 
-#: kpilot/hotSync.cc:1100
+#: kpilot/hotSync.cpp:1100
 #, fuzzy
 msgid "Cannot restore file `%1'."
 msgstr "Ne mogu da instaliram datoteka '%1'!"
 
-#: kpilot/internalEditorAction.cc:62
+#: kpilot/internalEditorAction.cpp:62
 msgid "[Internal Editors]"
 msgstr ""
 
-#: kpilot/internalEditorAction.cc:76
+#: kpilot/internalEditorAction.cpp:76
 #, c-format
 msgid "Databases with changed records: %1"
 msgstr "Baze podataka sa izmenjenim slogovima: %1"
 
-#: kpilot/internalEditorAction.cc:101
+#: kpilot/internalEditorAction.cpp:101
 msgid "Unable to open the serial or local database for %1. Skipping it."
 msgstr ""
 "Ne mogu da otvorim serijsku ili lokalnu bazu podataka za %1. Preskačem je."
 
-#: kpilot/internalEditorAction.cc:156
+#: kpilot/internalEditorAction.cpp:156
 msgid "record"
 msgstr "slog"
 
-#: kpilot/internalEditorAction.cc:166
+#: kpilot/internalEditorAction.cpp:166
 msgid "address"
 msgstr "adresa"
 
-#: kpilot/internalEditorAction.cc:177
+#: kpilot/internalEditorAction.cpp:177
 #, fuzzy
 msgid "to-do entry"
 msgstr "zadatak"
 
-#: kpilot/internalEditorAction.cc:186
+#: kpilot/internalEditorAction.cpp:186
 msgid "memo"
 msgstr "beleška"
 
-#: kpilot/internalEditorAction.cc:197
+#: kpilot/internalEditorAction.cpp:197
 msgid "calendar entry"
 msgstr "kalendar"
 
-#: kpilot/internalEditorAction.cc:204
+#: kpilot/internalEditorAction.cpp:204
 msgid ""
 "The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
 "the internal editor. Shall the changes in KPilot be copied to the handheld, "
@@ -2136,36 +2136,36 @@ msgstr ""
 "uređivaču. Da li da se promjene u KPilot-u kopiraju na ručni računar i time "
 "pregaze tamošnje izmjene?"
 
-#: kpilot/internalEditorAction.cc:209
+#: kpilot/internalEditorAction.cpp:209
 #, c-format
 msgid "Conflict in database  %1"
 msgstr "Konflikt u bazi podataka %1"
 
-#: kpilot/internalEditorAction.cc:211
+#: kpilot/internalEditorAction.cpp:211
 msgid "Use KPilot"
 msgstr "Koristi KPilot"
 
-#: kpilot/internalEditorAction.cc:211
+#: kpilot/internalEditorAction.cpp:211
 msgid "Use Handheld"
 msgstr "Koristi ručni računar"
 
-#: kpilot/internalEditorAction.cc:212
+#: kpilot/internalEditorAction.cpp:212
 msgid "Use &KPilot"
 msgstr "&Koristi KPilot"
 
-#: kpilot/internalEditorAction.cc:213
+#: kpilot/internalEditorAction.cpp:213
 msgid "Use &Handheld"
 msgstr "Koristi &ručni računar"
 
-#: kpilot/internalEditorAction.cc:228 kpilot/internalEditorAction.cc:244
+#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
 msgid "Entry in KPilot"
 msgstr "Stavka u KPilot-u"
 
-#: kpilot/internalEditorAction.cc:235 kpilot/internalEditorAction.cc:272
+#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
 msgid "Entry on Handheld"
 msgstr "Stavka na ručnom računaru"
 
-#: kpilot/internalEditorAction.cc:263 kpilot/internalEditorAction.cc:291
+#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
 msgid ""
 "To view and edit the record data, please install a hex editor (e.g. khexedit "
 "from tdeutils)."
@@ -2173,27 +2173,27 @@ msgstr ""
 "Da biste gledali i uređivali snimljene podatke, instalirajte neki "
 "heksadecimalni editor (npr. khexedit)"
 
-#: kpilot/internalEditorAction.cc:315
+#: kpilot/internalEditorAction.cpp:315
 #, c-format
 msgid "Databases with changed flags: %1"
 msgstr "Baze podataka sa izmenjenim zastavicama: %1"
 
-#: kpilot/internalEditorAction.cc:333
+#: kpilot/internalEditorAction.cpp:333
 msgid "Setting the database flags on the handheld is not yet supported."
 msgstr ""
 "Postavljanje zastavica baza podataka na ručnom računaru još uvijek nije "
 "podržano."
 
-#: kpilot/internalEditorAction.cc:356
+#: kpilot/internalEditorAction.cpp:356
 #, c-format
 msgid "Databases with changed AppBlock: %1"
 msgstr "Baze podataka sa izmenjenim info-blokovima programa: %1"
 
-#: kpilot/kpilot.cc:162
+#: kpilot/kpilot.cpp:162
 msgid "Starting the KPilot daemon ..."
 msgstr "Pokrećem KPilot-ovog demona ..."
 
-#: kpilot/kpilot.cc:179
+#: kpilot/kpilot.cpp:179
 msgid ""
 "Could not start the KPilot daemon. The system error message was: &quot;"
 "%1&quot;"
@@ -2201,342 +2201,342 @@ msgstr ""
 "Nisam mogao da pokrenem KPilot-ovog demona. Sistemska poruka o grešci je: "
 "'%1'"
 
-#: kpilot/kpilot.cc:196
+#: kpilot/kpilot.cpp:196
 msgid "Daemon status is `%1'"
 msgstr "Status demona je '%1'"
 
-#: kpilot/kpilot.cc:197
+#: kpilot/kpilot.cpp:197
 msgid "not running"
 msgstr ""
 
-#: kpilot/kpilot.cc:214
+#: kpilot/kpilot.cpp:214
 msgid "Using character set %1 on the handheld."
 msgstr "Koristi se skup znakova %1 na ručnom računaru."
 
-#: kpilot/kpilot.cc:266 kpilot/kpilot.cc:268
+#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
 #, fuzzy
 msgid "To-do Viewer"
 msgstr "Prikazivač zadataka"
 
-#: kpilot/kpilot.cc:270 kpilot/kpilot.cc:272
+#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
 #: kpilot/kpilotConfigDialog_viewers.ui:74
 #, no-c-format
 msgid "Address Viewer"
 msgstr "Prikazivač adresa"
 
-#: kpilot/kpilot.cc:274 kpilot/kpilot.cc:276
+#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
 msgid "Memo Viewer"
 msgstr "Prikazivač beleški"
 
-#: kpilot/kpilot.cc:278 kpilot/kpilot.cc:281 kpilot/pilotDaemon.cc:736
+#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
 msgid "File Installer"
 msgstr "Instalator fajlova"
 
-#: kpilot/kpilot.cc:283 kpilot/kpilot.cc:285
+#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
 msgid "Generic DB Viewer"
 msgstr "Generički prikazivač baza"
 
-#: kpilot/kpilot.cc:360
+#: kpilot/kpilot.cpp:360
 #, fuzzy
 msgid "Next sync will be a backup. "
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:361 kpilot/kpilot.cc:369 kpilot/kpilot.cc:377
-#: kpilot/kpilot.cc:385 kpilot/kpilot.cc:393 kpilot/kpilot.cc:401
-#: kpilot/pilotDaemon.cc:671
+#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
+#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
+#: kpilot/pilotDaemon.cpp:671
 msgid "Please press the HotSync button."
 msgstr "Pritisnite dugme Vruća sinhronizacija."
 
-#: kpilot/kpilot.cc:368
+#: kpilot/kpilot.cpp:368
 #, fuzzy
 msgid "Next sync will restore the Pilot from backup. "
 msgstr "Povrati Pilot-a iz rezervne kopije"
 
-#: kpilot/kpilot.cc:376
+#: kpilot/kpilot.cpp:376
 msgid "Next sync will be a regular HotSync. "
 msgstr ""
 
-#: kpilot/kpilot.cc:384
+#: kpilot/kpilot.cpp:384
 #, fuzzy
 msgid "Next sync will be a Full Sync. "
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:392
+#: kpilot/kpilot.cpp:392
 #, fuzzy
 msgid "Next sync will copy Handheld data to PC. "
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:400
+#: kpilot/kpilot.cpp:400
 #, fuzzy
 msgid "Next sync will copy PC data to Handheld. "
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:428
+#: kpilot/kpilot.cpp:428
 #, fuzzy
 msgid "The daemon has exited."
 msgstr "&Zaustavi demona pri izlazu"
 
-#: kpilot/kpilot.cc:429
+#: kpilot/kpilot.cpp:429
 msgid "No further HotSyncs are possible."
 msgstr ""
 
-#: kpilot/kpilot.cc:430
+#: kpilot/kpilot.cpp:430
 msgid "Restart the daemon to HotSync again."
 msgstr ""
 
-#: kpilot/kpilot.cc:450
+#: kpilot/kpilot.cpp:450
 #, fuzzy, c-format
 msgid "Cannot start a Sync now. %1"
 msgstr "Trenutno ne mogu da pokrenem sinhronizaciju. %1"
 
-#: kpilot/kpilot.cc:463
+#: kpilot/kpilot.cpp:463
 #, fuzzy
 msgid "Cannot start Sync"
 msgstr "Ne mogu da pokrenem sinhronizaciju"
 
-#: kpilot/kpilot.cc:517
+#: kpilot/kpilot.cpp:517
 msgid "Select the kind of HotSync to perform next."
 msgstr ""
 
-#: kpilot/kpilot.cc:518
+#: kpilot/kpilot.cpp:518
 msgid ""
 "Select the kind of HotSync to perform next. This applies only to the next "
 "HotSync; to change the default, use the configuration dialog."
 msgstr ""
 
-#: kpilot/kpilot.cc:525
+#: kpilot/kpilot.cpp:525
 msgid "&HotSync"
 msgstr "&Vruće sinhronizuj"
 
-#: kpilot/kpilot.cc:528
+#: kpilot/kpilot.cpp:528
 #, fuzzy
 msgid "Next HotSync will be normal HotSync."
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:529
+#: kpilot/kpilot.cpp:529
 msgid "Tell the daemon that the next HotSync should be a normal HotSync."
 msgstr ""
 
-#: kpilot/kpilot.cc:533
+#: kpilot/kpilot.cpp:533
 #, fuzzy
 msgid "Full&Sync"
 msgstr "Sinhronizuj"
 
-#: kpilot/kpilot.cc:536
+#: kpilot/kpilot.cpp:536
 #, fuzzy
 msgid "Next HotSync will be a FullSync."
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:537
+#: kpilot/kpilot.cpp:537
 msgid ""
 "Tell the daemon that the next HotSync should be a FullSync (check data on "
 "both sides)."
 msgstr ""
 
-#: kpilot/kpilot.cc:541
+#: kpilot/kpilot.cpp:541
 msgid "&Backup"
 msgstr "&Napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:544 kpilot/kpilot.cc:560
+#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
 #, fuzzy
 msgid "Next HotSync will be backup."
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:545
+#: kpilot/kpilot.cpp:545
 #, fuzzy
 msgid ""
 "Tell the daemon that the next HotSync should back up the Handheld to the PC."
 msgstr "Sinhronizuje se i od PC-ja kao ručnom računaru i obrnuto"
 
-#: kpilot/kpilot.cc:549
+#: kpilot/kpilot.cpp:549
 msgid "&Restore"
 msgstr "&Povrati"
 
-#: kpilot/kpilot.cc:552
+#: kpilot/kpilot.cpp:552
 #, fuzzy
 msgid "Next HotSync will be restore."
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:553
+#: kpilot/kpilot.cpp:553
 msgid ""
 "Tell the daemon that the next HotSync should restore the Handheld from data "
 "on the PC."
 msgstr ""
 
-#: kpilot/kpilot.cc:557 kpilot/kpilotConfigDialog_sync.ui:59
-#: lib/syncAction.cc:207
+#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
+#: lib/syncAction.cpp:207
 #, no-c-format
 msgid "Copy Handheld to PC"
 msgstr "Kopiraj ručni računar na PC"
 
-#: kpilot/kpilot.cc:561
+#: kpilot/kpilot.cpp:561
 #, fuzzy
 msgid ""
 "Tell the daemon that the next HotSync should copy all data from the Handheld "
 "to the PC, overwriting entries on the PC."
 msgstr "Sinhronizuje se i od PC-ja kao ručnom računaru i obrnuto"
 
-#: kpilot/kpilot.cc:566 kpilot/kpilotConfigDialog_sync.ui:54
-#: lib/syncAction.cc:206
+#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
+#: lib/syncAction.cpp:206
 #, no-c-format
 msgid "Copy PC to Handheld"
 msgstr "Kopiraj PC na ručni računar"
 
-#: kpilot/kpilot.cc:569
+#: kpilot/kpilot.cpp:569
 #, fuzzy
 msgid "Next HotSync will copy PC to Handheld."
 msgstr "Sinhronizuj PC prema ručnom računaru"
 
-#: kpilot/kpilot.cc:570
+#: kpilot/kpilot.cpp:570
 #, fuzzy
 msgid ""
 "Tell the daemon that the next HotSync should copy all data from the PC to "
 "the Handheld, overwriting entries on the Handheld."
 msgstr "Sinhronizuje se i od PC-ja kao ručnom računaru i obrnuto"
 
-#: kpilot/kpilot.cc:577
+#: kpilot/kpilot.cpp:577
 msgid "&List Only"
 msgstr ""
 
-#: kpilot/kpilot.cc:580
+#: kpilot/kpilot.cpp:580
 #, fuzzy
 msgid "Next HotSync will list databases."
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/kpilot.cc:581
+#: kpilot/kpilot.cpp:581
 msgid ""
 "Tell the daemon that the next HotSync should just list the files on the "
 "Handheld and do nothing else."
 msgstr ""
 
-#: kpilot/kpilot.cc:588
+#: kpilot/kpilot.cpp:588
 #, fuzzy
 msgid "Rese&t Link"
 msgstr "Resetuj"
 
-#: kpilot/kpilot.cc:591
+#: kpilot/kpilot.cpp:591
 msgid "Reset the device connection."
 msgstr ""
 
-#: kpilot/kpilot.cc:592
+#: kpilot/kpilot.cpp:592
 msgid "Try to reset the daemon and its connection to the Handheld."
 msgstr ""
 
-#: kpilot/kpilot.cc:597
+#: kpilot/kpilot.cpp:597
 msgid "Quit KPilot, (and stop the daemon if configured that way)."
 msgstr ""
 
-#: kpilot/kpilot.cc:613
+#: kpilot/kpilot.cpp:613
 #, fuzzy
 msgid "Configuration &Wizard..."
 msgstr "Dijalog za podešavanje provoda"
 
-#: kpilot/kpilot.cc:616
+#: kpilot/kpilot.cpp:616
 #, fuzzy
 msgid "Configure KPilot using the configuration wizard."
 msgstr "Ovaj dodatak JPilot-a nema dijalog za podešavanje"
 
-#: kpilot/kpilot.cc:851
+#: kpilot/kpilot.cpp:851
 msgid ""
 "The library containing the configuration wizard for KPilot could not be "
 "loaded, and the wizard is not available. Please try to use the regular "
 "configuration dialog."
 msgstr ""
 
-#: kpilot/kpilot.cc:854
+#: kpilot/kpilot.cpp:854
 #, fuzzy
 msgid "Wizard Not Available"
 msgstr "Dostupni"
 
-#: kpilot/kpilot.cc:898
+#: kpilot/kpilot.cpp:898
 msgid "Changed username to `%1'."
 msgstr ""
 
-#: kpilot/kpilot.cc:927
+#: kpilot/kpilot.cpp:927
 msgid ""
 "Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
 "busy)."
 msgstr ""
 
-#: kpilot/kpilot.cc:951
+#: kpilot/kpilot.cpp:951
 #, fuzzy
 msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
 msgstr "Ne mogu da otvorim Pilot-ov port '%1'. "
 
-#: kpilot/kpilot.cc:991
+#: kpilot/kpilot.cpp:991
 #, fuzzy
 msgid "Setup the Pilot device, conduits and other parameters"
 msgstr "Podesi Pilot-ski uređaj i ostale parametre"
 
-#: kpilot/kpilot.cc:993 kpilot/pilotDaemon.cc:1296
+#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
 msgid "Set debugging level"
 msgstr "Postavi nivo otkrivanja grešaka"
 
-#: kpilot/kpilot.cc:1015
+#: kpilot/kpilot.cpp:1015
 msgid "KPilot"
 msgstr "KPilot"
 
-#: kpilot/kpilot.cc:1024 kpilot/pilotDaemon.cc:1320
+#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
 msgid "Project Leader"
 msgstr "Vođa projekta"
 
-#: kpilot/kpilot.cc:1030 kpilot/kpilot.cc:1032
+#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
 #, fuzzy
 msgid "Core and conduits developer"
 msgstr "Programeri provoda"
 
-#: kpilot/kpilot.cc:1034
+#: kpilot/kpilot.cpp:1034
 msgid "VCal conduit"
 msgstr "VCal provod"
 
-#: kpilot/kpilot.cc:1035
+#: kpilot/kpilot.cpp:1035
 msgid "Abbrowser conduit"
 msgstr "Abbrowser provod"
 
-#: kpilot/kpilot.cc:1036
+#: kpilot/kpilot.cpp:1036
 msgid "Expenses conduit"
 msgstr "Expenses provod"
 
-#: kpilot/kpilot.cc:1037
+#: kpilot/kpilot.cpp:1037
 #, fuzzy
 msgid "Notepad conduit, Bugfixer"
 msgstr "[Provod KNotes-a: "
 
-#: kpilot/kpilot.cc:1041
+#: kpilot/kpilot.cpp:1041
 msgid "XML GUI"
 msgstr "XML GUI"
 
-#: kpilot/kpilot.cc:1044
+#: kpilot/kpilot.cpp:1044
 msgid ".ui files"
 msgstr ".ui datoteke"
 
-#: kpilot/kpilot.cc:1046
+#: kpilot/kpilot.cpp:1046
 msgid "Bugfixer, coolness"
 msgstr "Ispravljač grešaka, kuliranje"
 
-#: kpilot/kpilot.cc:1048
+#: kpilot/kpilot.cpp:1048
 msgid "VCalconduit state machine, CMake"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:163
+#: kpilot/kpilotConfig.cpp:163
 msgid "The configuration file is outdated."
 msgstr "Fajl sa podešavanjima je zastareo."
 
-#: kpilot/kpilotConfig.cc:165
+#: kpilot/kpilotConfig.cpp:165
 msgid "The configuration file has version %1, while KPilot needs version %2."
 msgstr ""
 "Fajl sa podešavanjima je verzije %1, a KPilot-u je potrebna verzija %2."
 
-#: kpilot/kpilotConfig.cc:170
+#: kpilot/kpilotConfig.cpp:170
 msgid ""
 "Please run KPilot and check the configuration carefully to update the file."
 msgstr "Pokrenite KPilot-a i pažljivo provjerite podešavanja."
 
-#: kpilot/kpilotConfig.cc:174
+#: kpilot/kpilotConfig.cpp:174
 msgid "Important changes to watch for are:"
 msgstr "Važne izmjene koje treba pratiti su:"
 
-#: kpilot/kpilotConfig.cc:178
+#: kpilot/kpilotConfig.cpp:178
 msgid ""
 "Renamed conduits, Kroupware and file installer have been made conduits as "
 "well."
@@ -2544,15 +2544,15 @@ msgstr ""
 "Provodi su preimenovani, Kroupware i instalator fajlova su takođe načinjeni "
 "provodima."
 
-#: kpilot/kpilotConfig.cc:181
+#: kpilot/kpilotConfig.cpp:181
 msgid "Conflict resolution is now a global setting."
 msgstr "Razrešenje konflikta sada je globalna postavka."
 
-#: kpilot/kpilotConfig.cc:186
+#: kpilot/kpilotConfig.cpp:186
 msgid "Changed format of no-backup databases."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:199
+#: kpilot/kpilotConfig.cpp:199
 msgid ""
 "The configuration file for KPilot is out-of date. Please run KPilot to "
 "update it."
@@ -2560,11 +2560,11 @@ msgstr ""
 "Fajl sa podešavanjima za KPilot-a je zastareo. Pokrenite KPilot-a da biste "
 "ga osvežili."
 
-#: kpilot/kpilotConfig.cc:202 kpilot/kpilotConfig.cc:327
+#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
 msgid "Configuration File Out-of Date"
 msgstr "Fajl sa podešavanjima je zastareo"
 
-#: kpilot/kpilotConfig.cc:220
+#: kpilot/kpilotConfig.cpp:220
 #, fuzzy
 msgid ""
 "The settings for the file installer have been moved to the conduits "
@@ -2573,11 +2573,11 @@ msgstr ""
 "Postavke za sinhronizovanje Kroupware-a sa KMail-om i instalatorom fajlova "
 "su premeštene u podešavanja provoda. Pogledajte listu instaliranih provoda."
 
-#: kpilot/kpilotConfig.cc:223
+#: kpilot/kpilotConfig.cpp:223
 msgid "Settings Updated"
 msgstr "Postavke su osvežene"
 
-#: kpilot/kpilotConfig.cc:248
+#: kpilot/kpilotConfig.cpp:248
 msgid ""
 "<qt>The following old conduits were found on your system. It is a good idea "
 "to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
@@ -2585,43 +2585,43 @@ msgstr ""
 "<qt>Sljedeći zastareli provodi nađeni su na vašem sistemu. Dobro bi bilo da "
 "uklonite njih i njima pridružene <tt>.la</tt> i <tt>.so.0</tt> datoteke.</qt>"
 
-#: kpilot/kpilotConfig.cc:253
+#: kpilot/kpilotConfig.cpp:253
 msgid "Old Conduits Found"
 msgstr "Pronađeni su zastareli provodi"
 
-#: kpilot/kpilotConfig.cc:285
+#: kpilot/kpilotConfig.cpp:285
 msgid ""
 "<qt>The no backup databases listed in your configuration file have been "
 "adjusted to the new format. Database creator IDs have been changed to use "
 "square brackets []."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:289
+#: kpilot/kpilotConfig.cpp:289
 #, fuzzy
 msgid "No Backup Databases Updated"
 msgstr "Nema izabrane baze podataka"
 
-#: kpilot/kpilotConfig.cc:310
+#: kpilot/kpilotConfig.cpp:310
 msgid ""
 "KPilot is not configured for use. You may use the configuration wizard or "
 "the normal configure dialog to configure KPilot."
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:313
+#: kpilot/kpilotConfig.cpp:313
 #, fuzzy
 msgid "Not Configured"
 msgstr "Podesi..."
 
-#: kpilot/kpilotConfig.cc:314
+#: kpilot/kpilotConfig.cpp:314
 msgid "Use &Wizard"
 msgstr ""
 
-#: kpilot/kpilotConfig.cc:315
+#: kpilot/kpilotConfig.cpp:315
 #, fuzzy
 msgid "Use &Dialog"
 msgstr "&Koristi KPilot"
 
-#: kpilot/kpilotConfig.cc:323
+#: kpilot/kpilotConfig.cpp:323
 msgid ""
 "The configuration file for KPilot is out-of date. KPilot can update some "
 "parts of the configuration automatically. Do you wish to continue?"
@@ -2629,7 +2629,7 @@ msgstr ""
 "Fajl sa podešavanjima za KPilot-a je zastareo. KPilot može automatski da "
 "osveži neke delove tog datoteke. Želite li da nastavite?"
 
-#: kpilot/kpilotConfigDialog.cc:68
+#: kpilot/kpilotConfigDialog.cpp:68
 #, fuzzy
 msgid ""
 "<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
@@ -2638,7 +2638,7 @@ msgstr ""
 "<qt>Postavke provoda <i>%1</i> su izmenjene. Želite li da snimite izmjene "
 "pre nego što se nastavi dalje?</qt>"
 
-#: kpilot/kpilotConfigDialog.cc:145
+#: kpilot/kpilotConfigDialog.cpp:145
 msgid ""
 "<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
 "This is probably unsupported and can cause problems. Are you sure you want "
@@ -2648,39 +2648,39 @@ msgstr ""
 "vjerovatno nije podržano i može izazvati probleme. Želite li zaista da "
 "koristite ovakvo ime uređaja?</qt>"
 
-#: kpilot/kpilotConfigDialog.cc:150
+#: kpilot/kpilotConfigDialog.cpp:150
 msgid "Device Name too Long"
 msgstr "Ime uređaja je predugačko"
 
-#: kpilot/kpilotConfigDialog.cc:150
+#: kpilot/kpilotConfigDialog.cpp:150
 msgid "Use"
 msgstr ""
 
-#: kpilot/kpilotConfigDialog.cc:150
+#: kpilot/kpilotConfigDialog.cpp:150
 #, fuzzy
 msgid "Do Not Use"
 msgstr "Ne šalji poštu"
 
-#: kpilot/kpilotConfigWizard.cc:62
+#: kpilot/kpilotConfigWizard.cpp:62
 #, fuzzy
 msgid "Pilot Info"
 msgstr "KPilot"
 
-#: kpilot/kpilotConfigWizard.cc:64
+#: kpilot/kpilotConfigWizard.cpp:64
 msgid "Application to Sync With"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:127
+#: kpilot/kpilotConfigWizard.cpp:127
 msgid "general TDE-PIM"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:133
+#: kpilot/kpilotConfigWizard.cpp:133
 msgid ""
 "_: Gnome's PIM suite\n"
 "Evolution"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:157
+#: kpilot/kpilotConfigWizard.cpp:157
 msgid ""
 "KPilot cannot yet synchronize the addressbook with Evolution, so the "
 "addressbook conduit was disabled.\n"
@@ -2688,39 +2688,39 @@ msgid ""
 "before the sync, otherwise you will lose data."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:157
+#: kpilot/kpilotConfigWizard.cpp:157
 msgid "Restrictions with Evolution"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:162
+#: kpilot/kpilotConfigWizard.cpp:162
 msgid ""
 "_: Kpilot will sync with nothing\n"
 "nothing (it will backup only)"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:166
+#: kpilot/kpilotConfigWizard.cpp:166
 msgid ""
 "_: TDE's PIM suite\n"
 "Kontact"
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:200
+#: kpilot/kpilotConfigWizard.cpp:200
 #, fuzzy, c-format
 msgid "KPilot is now configured to sync with %1."
 msgstr "Pilot-ski uređaj još uvijek nije podešen."
 
-#: kpilot/kpilotConfigWizard.cc:205
+#: kpilot/kpilotConfigWizard.cpp:205
 msgid ""
 "The remaining options in the config dialog are advanced options and can be "
 "used to fine-tune KPilot."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:210
+#: kpilot/kpilotConfigWizard.cpp:210
 #, fuzzy
 msgid "Automatic Configuration Finished"
 msgstr "Dijalog za podešavanje provoda"
 
-#: kpilot/kpilotConfigWizard.cc:217
+#: kpilot/kpilotConfigWizard.cpp:217
 msgid ""
 "Please put the handheld in the cradle, press the hotsync button and click on "
 "\"Continue\".\n"
@@ -2731,65 +2731,65 @@ msgid ""
 "might be advisable not to continue."
 msgstr ""
 
-#: kpilot/kpilotConfigWizard.cc:223
+#: kpilot/kpilotConfigWizard.cpp:223
 #, fuzzy
 msgid "Handheld Detection"
 msgstr "Drugi telefon na ručnom računaru:"
 
-#: kpilot/kpilotProbeDialog.cc:90
+#: kpilot/kpilotProbeDialog.cpp:90
 msgid "Autodetecting Your Handheld"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:90
+#: kpilot/kpilotProbeDialog.cpp:90
 msgid "Restart Detection"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:97
+#: kpilot/kpilotProbeDialog.cpp:97
 msgid ""
 "KPilot is now trying to automatically detect the device of your handheld. "
 "Please press the hotsync button if you have not done so already."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:100
+#: kpilot/kpilotProbeDialog.cpp:100
 #, fuzzy
 msgid "Status"
 msgstr "Država:"
 
-#: kpilot/kpilotProbeDialog.cc:104
+#: kpilot/kpilotProbeDialog.cpp:104
 msgid "Autodetection not yet started..."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:113
+#: kpilot/kpilotProbeDialog.cpp:113
 msgid "Detected Values"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:119
+#: kpilot/kpilotProbeDialog.cpp:119
 #, fuzzy
 msgid "Handheld user:"
 msgstr "Faks na ručnom računaru:"
 
-#: kpilot/kpilotProbeDialog.cc:123
+#: kpilot/kpilotProbeDialog.cpp:123
 msgid "Device:"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:126 kpilot/kpilotProbeDialog.cc:129
+#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
 msgid "[Not yet known]"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:195
+#: kpilot/kpilotProbeDialog.cpp:195
 #, fuzzy
 msgid "Starting detection..."
 msgstr "Pokrećem KPilot-ovog demona ..."
 
-#: kpilot/kpilotProbeDialog.cc:233
+#: kpilot/kpilotProbeDialog.cpp:233
 msgid "Waiting for handheld to connect..."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:266
+#: kpilot/kpilotProbeDialog.cpp:266
 msgid "Timeout reached, could not detect a handheld."
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:267
+#: kpilot/kpilotProbeDialog.cpp:267
 msgid ""
 "<qt>A handheld could not be detected. Possible check the following things:</"
 "p><ul><li> Have you pressed the hotsync button on the handheld?\n"
@@ -2800,83 +2800,83 @@ msgid ""
 "</ul>"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:273
+#: kpilot/kpilotProbeDialog.cpp:273
 #, fuzzy
 msgid "Automatic Detection Failed"
 msgstr "Dijalog za podešavanje provoda"
 
-#: kpilot/kpilotProbeDialog.cc:288
+#: kpilot/kpilotProbeDialog.cpp:288
 #, c-format
 msgid "Found a connected device on %1"
 msgstr ""
 
-#: kpilot/kpilotProbeDialog.cc:338
+#: kpilot/kpilotProbeDialog.cpp:338
 msgid "Disconnected from all devices"
 msgstr ""
 
-#: kpilot/kroupware.cc:126
+#: kpilot/kroupware.cpp:126
 #, fuzzy
 msgid "Syncing to-dos with KMail"
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: kpilot/kroupware.cc:135
+#: kpilot/kroupware.cpp:135
 #, fuzzy
 msgid "Syncing calendar with KMail"
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: kpilot/kroupware.cc:177
+#: kpilot/kroupware.cpp:177
 #, fuzzy
 msgid "Syncing Notes with Mail"
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: kpilot/kroupware.cc:188
+#: kpilot/kroupware.cpp:188
 #, fuzzy
 msgid "Rewriting to-dos to KMail..."
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: kpilot/kroupware.cc:195
+#: kpilot/kroupware.cpp:195
 msgid "Rewriting Calendar to KMail"
 msgstr ""
 
-#: kpilot/kroupware.cc:230
+#: kpilot/kroupware.cpp:230
 msgid "Syncing KMail with Addresses "
 msgstr ""
 
-#: kpilot/kroupware.cc:259
+#: kpilot/kroupware.cpp:259
 #, fuzzy
 msgid "Syncing KMail with Notes"
 msgstr "Sinhronizujem sa datotekom '%1'"
 
-#: kpilot/logFile.cc:97 lib/actions.cc:134
+#: kpilot/logFile.cpp:97 lib/actions.cpp:134
 msgid "HotSync finished."
 msgstr "Vruća sinhronizacija je završena."
 
-#: kpilot/logWidget.cc:90
+#: kpilot/logWidget.cpp:90
 msgid ""
 "<qt>This lists all the messages received during the current HotSync</qt>"
 msgstr ""
 "<qt>Ovo lista sve poruke koje su primljene u toku vruće sinhronizacije</qt>"
 
-#: kpilot/logWidget.cc:119
+#: kpilot/logWidget.cpp:119
 #, fuzzy
 msgid "<qt><b>HotSync Log</b></qt>"
 msgstr "<qt><b>Dnevnik vruće sinhronizacije</b></qt>"
 
-#: kpilot/logWidget.cc:134
+#: kpilot/logWidget.cpp:134
 msgid ""
 "_: Clear the text of HotSync messages\n"
 "Clear Log"
 msgstr "Isprazni dnevnik"
 
-#: kpilot/logWidget.cc:136
+#: kpilot/logWidget.cpp:136
 msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
 msgstr "<qt>Čisti se lista poruka iz tekuće vruće sinhronizacije.</qt>"
 
-#: kpilot/logWidget.cc:140
+#: kpilot/logWidget.cpp:140
 msgid "Save Log..."
 msgstr "Snimi dnevnik..."
 
-#: kpilot/logWidget.cc:141
+#: kpilot/logWidget.cpp:141
 msgid ""
 "<qt>You can save the list of messages received during this HotSync to a file "
 "(for example for use in a bug report) by clicking here.</qt>"
@@ -2885,117 +2885,117 @@ msgstr ""
 "sinhronizacije (na primjer radi sastavljanja izvještaja o grešci) tako što "
 "ćete kliknuti na ovo dugme.</qt>"
 
-#: kpilot/logWidget.cc:150
+#: kpilot/logWidget.cpp:150
 msgid "Sync progress:"
 msgstr "Napredak sinhronizacije:"
 
-#: kpilot/logWidget.cc:153
+#: kpilot/logWidget.cpp:153
 msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
 msgstr "<qt>Procenat završenosti (procenjen) tekuće sinhronizacije.</qt>"
 
-#: kpilot/logWidget.cc:270
+#: kpilot/logWidget.cpp:270
 #, fuzzy
 msgid "<b>HotSync Finished.</b>"
 msgstr "<b>Vruća sinhronizacija je završena!</b>"
 
-#: kpilot/logWidget.cc:334
+#: kpilot/logWidget.cpp:334
 msgid "Save Log"
 msgstr "Snimi dnevnik"
 
-#: kpilot/logWidget.cc:341
+#: kpilot/logWidget.cpp:341
 msgid "The file exists. Do you want to overwrite it?"
 msgstr "Fajl već postoji. Želite li da ga prebrišete?"
 
-#: kpilot/logWidget.cc:343
+#: kpilot/logWidget.cpp:343
 msgid "File Exists"
 msgstr "Fajl već postoji"
 
-#: kpilot/logWidget.cc:343
+#: kpilot/logWidget.cpp:343
 #, fuzzy
 msgid "Do Not Overwrite"
 msgstr "&Prebriši"
 
-#: kpilot/logWidget.cc:367
+#: kpilot/logWidget.cpp:367
 #, fuzzy
 msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
 msgstr ""
 "<qt>Fajl '%1' ne može da se otvori za upis. Da li da pokušam ponovo?</qt>"
 
-#: kpilot/logWidget.cc:369
+#: kpilot/logWidget.cpp:369
 #, fuzzy
 msgid "Cannot Save"
 msgstr "Ne mogu da snimim"
 
-#: kpilot/logWidget.cc:369
+#: kpilot/logWidget.cpp:369
 msgid "Try Again"
 msgstr ""
 
-#: kpilot/logWidget.cc:369
+#: kpilot/logWidget.cpp:369
 #, fuzzy
 msgid "Do Not Try"
 msgstr "Ne radi ništa"
 
-#: kpilot/main-test.cc:66
+#: kpilot/main-test.cpp:66
 msgid "Path to Pilot device node"
 msgstr "Putanja do čvora Pilot-skog uređaja"
 
-#: kpilot/main-test.cc:69
+#: kpilot/main-test.cpp:69
 #, fuzzy
 msgid "List DBs"
 msgstr "Lista baza (podrazumijevano)"
 
-#: kpilot/main-test.cc:71
+#: kpilot/main-test.cpp:71
 msgid "Backup Pilot to <dest dir>"
 msgstr ""
 
-#: kpilot/main-test.cc:73
+#: kpilot/main-test.cpp:73
 msgid "Restore Pilot from backup"
 msgstr "Povrati Pilot-a iz rezervne kopije"
 
-#: kpilot/main-test.cc:76
+#: kpilot/main-test.cpp:76
 msgid "Run conduit from desktop file <filename>"
 msgstr "Pokreni provod iz datoteke radne površine <ime datoteke>"
 
-#: kpilot/main-test.cc:80
+#: kpilot/main-test.cpp:80
 msgid "Run a specific check (with the device)"
 msgstr ""
 
-#: kpilot/main-test.cc:83
+#: kpilot/main-test.cpp:83
 #, fuzzy
 msgid "Show KPilot configuration information"
 msgstr "Informacije o sinhronizaciji"
 
-#: kpilot/main-test.cc:86
+#: kpilot/main-test.cpp:86
 #, fuzzy
 msgid "Set the debug level"
 msgstr "Postavi nivo otkrivanja grešaka"
 
-#: kpilot/main-test.cc:94
+#: kpilot/main-test.cpp:94
 msgid "*Really* run the conduit, not in test mode."
 msgstr "*Zaista* pokreni provod, a ne u probnom režimu."
 
-#: kpilot/main-test.cc:98
+#: kpilot/main-test.cpp:98
 #, fuzzy
 msgid "Run the conduit in file-test mode."
 msgstr "*Zaista* pokreni provod, a ne u probnom režimu."
 
-#: kpilot/main-test.cc:101
+#: kpilot/main-test.cpp:101
 msgid "Copy Pilot to Desktop."
 msgstr ""
 
-#: kpilot/main-test.cc:104
+#: kpilot/main-test.cpp:104
 msgid "Copy Desktop to Pilot."
 msgstr ""
 
-#: kpilot/main-test.cc:107
+#: kpilot/main-test.cpp:107
 msgid "Repeated perform action - only useful for --list"
 msgstr ""
 
-#: kpilot/main-test.cc:347
+#: kpilot/main-test.cpp:347
 msgid "KPilotTest"
 msgstr "KPilotTest"
 
-#: kpilot/main-test.cc:352
+#: kpilot/main-test.cpp:352
 msgid "KPilot Maintainer"
 msgstr "Održavalac KPilot-a"
 
@@ -3008,17 +3008,17 @@ msgstr "Održavalac KPilot-a"
 #: conduits/recordconduit/setup_base.ui:68
 #: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
 #: conduits/timeconduit/time-setup_dialog.ui:35
-#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cc:357
+#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
 #, no-c-format
 msgid "General"
 msgstr "Opšte"
 
-#: kpilot/main-test.cc:359
+#: kpilot/main-test.cpp:359
 #, fuzzy
 msgid "Conduit Actions"
 msgstr "Opcije nultog provoda"
 
-#: kpilot/memoWidget.cc:234
+#: kpilot/memoWidget.cpp:234
 msgid ""
 "Select the category of addresses\n"
 "to display here."
@@ -3026,11 +3026,11 @@ msgstr ""
 "Izaberite kategoriju adresa koje\n"
 "ovdje treba prikazati."
 
-#: kpilot/memoWidget.cc:237
+#: kpilot/memoWidget.cpp:237
 msgid "Memos:"
 msgstr "Beleške:"
 
-#: kpilot/memoWidget.cc:249
+#: kpilot/memoWidget.cpp:249
 msgid ""
 "This list displays all the memos\n"
 "in the selected category. Click on\n"
@@ -3040,107 +3040,107 @@ msgstr ""
 "izabranoj kategoriji. Kliknite na neku\n"
 "od njih da biste je pregledali desno."
 
-#: kpilot/memoWidget.cc:253
+#: kpilot/memoWidget.cpp:253
 msgid "Memo text:"
 msgstr "Tekst beleške:"
 
-#: kpilot/memoWidget.cc:261
+#: kpilot/memoWidget.cpp:261
 msgid "The text of the selected memo appears here."
 msgstr "Ovdje se prikazuje tekst izabrane beleške."
 
-#: kpilot/memoWidget.cc:264
+#: kpilot/memoWidget.cpp:264
 msgid "Import Memo..."
 msgstr "Uvezi belešku..."
 
-#: kpilot/memoWidget.cc:268
+#: kpilot/memoWidget.cpp:268
 msgid "Read a text file and add it to the Pilot's memo database."
 msgstr "Učitava se tekstualni datoteka i dodaje Pilot-ovoj bazi beleški."
 
-#: kpilot/memoWidget.cc:269
+#: kpilot/memoWidget.cpp:269
 msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
 msgstr ""
 
-#: kpilot/memoWidget.cc:272
+#: kpilot/memoWidget.cpp:272
 msgid "Export Memo..."
 msgstr "Izvezi belešku..."
 
-#: kpilot/memoWidget.cc:277
+#: kpilot/memoWidget.cpp:277
 msgid "Write the selected memo to a file."
 msgstr "Izabrana beleška se zapisuje u datoteka."
 
-#: kpilot/memoWidget.cc:279
+#: kpilot/memoWidget.cpp:279
 msgid "Delete Memo"
 msgstr "Obriši belešku"
 
-#: kpilot/memoWidget.cc:284
+#: kpilot/memoWidget.cpp:284
 msgid "Delete the selected memo."
 msgstr "Briše se izabrana beleška."
 
-#: kpilot/memoWidget.cc:288
+#: kpilot/memoWidget.cpp:288
 msgid "Add Memo"
 msgstr ""
 
-#: kpilot/memoWidget.cc:291
+#: kpilot/memoWidget.cpp:291
 msgid "Add a new memo to the database."
 msgstr ""
 
-#: kpilot/memoWidget.cc:343
+#: kpilot/memoWidget.cpp:343
 msgid "Delete currently selected memo?"
 msgstr "Da li da obrišem trenutno izabranu belešku?"
 
-#: kpilot/memoWidget.cc:344
+#: kpilot/memoWidget.cpp:344
 msgid "Delete Memo?"
 msgstr "Da li da obrišem belešku?"
 
-#: kpilot/memoWidget.cc:367
+#: kpilot/memoWidget.cpp:367
 msgid "Cannot open MemoDB to delete record."
 msgstr ""
 
-#: kpilot/memoWidget.cc:368
+#: kpilot/memoWidget.cpp:368
 #, fuzzy
 msgid "Cannot Delete Memo"
 msgstr "Obriši belešku"
 
-#: kpilot/pilotComponent.cc:153
+#: kpilot/pilotComponent.cpp:153
 msgid "All"
 msgstr "Sve"
 
-#: kpilot/pilotDaemon.cc:157
+#: kpilot/pilotDaemon.cpp:157
 msgid "Start &KPilot"
 msgstr "Po&kreni KPilot-a"
 
-#: kpilot/pilotDaemon.cc:159
+#: kpilot/pilotDaemon.cpp:159
 #, fuzzy
 msgid "&Configure KPilot..."
 msgstr "&Podesi izabrani..."
 
-#: kpilot/pilotDaemon.cc:164
+#: kpilot/pilotDaemon.cpp:164
 msgid ""
 "_: Appended to names of sync types to indicate the sync will happen just one "
 "time\n"
 " (once)"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:168
+#: kpilot/pilotDaemon.cpp:168
 #, fuzzy
 msgid "Default (%1)"
 msgstr "&Posebna sinhronizacija:"
 
-#: kpilot/pilotDaemon.cc:185
+#: kpilot/pilotDaemon.cpp:185
 #, fuzzy
 msgid "Next &Sync"
 msgstr "Bez sinhronizacije"
 
-#: kpilot/pilotDaemon.cc:670
+#: kpilot/pilotDaemon.cpp:670
 #, fuzzy
 msgid "Next HotSync will be: %1. "
 msgstr "&Normalna sinhronizacija, napravi rezervnu kopiju"
 
-#: kpilot/pilotDaemon.cc:902
+#: kpilot/pilotDaemon.cpp:902
 msgid "HotSync is disabled while the screen is locked."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:907
+#: kpilot/pilotDaemon.cpp:907
 msgid ""
 "HotSync is disabled because KPilot could not determine the state of the "
 "screen saver. You can disable this security feature by unchecking the 'do "
@@ -3148,43 +3148,43 @@ msgid ""
 "configuration dialog."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1165 kpilot/pilotDaemon.cc:1166
+#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
 msgid "HotSync Completed.<br>"
 msgstr "Vruća sinhronizacija je završena.<br>"
 
-#: kpilot/pilotDaemon.cc:1274
+#: kpilot/pilotDaemon.cpp:1274
 #, c-format
 msgid "Next sync is %1."
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1298
+#: kpilot/pilotDaemon.cpp:1298
 msgid "Device to try first"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1299
+#: kpilot/pilotDaemon.cpp:1299
 msgid "Exit instead of complaining about bad configuration files"
 msgstr ""
 
-#: kpilot/pilotDaemon.cc:1311
+#: kpilot/pilotDaemon.cpp:1311
 msgid "KPilot Daemon"
 msgstr "KPilot demon"
 
-#: kpilot/pilotDaemon.cc:1326
+#: kpilot/pilotDaemon.cpp:1326
 #, fuzzy
 msgid "Developer"
 msgstr "Glavni programer"
 
-#: kpilot/todoEditor.cc:48
+#: kpilot/todoEditor.cpp:48
 #, fuzzy
 msgid "To-do Editor"
 msgstr "Uređivač zadataka"
 
-#: kpilot/todoWidget.cc:174
+#: kpilot/todoWidget.cpp:174
 #, fuzzy
 msgid "There are still %1 to-do editing windows open."
 msgstr "Još uvijek je otvoreno %1 prozora za uređivanje zadataka."
 
-#: kpilot/todoWidget.cc:178
+#: kpilot/todoWidget.cpp:178
 #, fuzzy, c-format
 msgid ""
 "_n: There is still a to-do editing window open.\n"
@@ -3194,17 +3194,17 @@ msgstr ""
 "Još uvijek su otvorena %n prozora za uređivanje zadataka.\n"
 "Još uvijek je otvoreno %n prozora za uređivanje zadataka."
 
-#: kpilot/todoWidget.cc:218
+#: kpilot/todoWidget.cpp:218
 #, fuzzy
 msgid "<qt>Select the category of to-dos to display here.</qt>"
 msgstr "<qt>Izaberite kategoriju zadataka koji treba da se prikažu ovdje.</qt>"
 
-#: kpilot/todoWidget.cc:225
+#: kpilot/todoWidget.cpp:225
 #, fuzzy
 msgid "To-do Item"
 msgstr "Stavka zadatka"
 
-#: kpilot/todoWidget.cc:243
+#: kpilot/todoWidget.cpp:243
 #, fuzzy
 msgid ""
 "<qt>This list displays all the to-dos in the selected category. Click on one "
@@ -3213,33 +3213,33 @@ msgstr ""
 "<qt>Ova lista prikazuje sve zadatke u izabranoj kategoriji. Kliknite na neki "
 "od njih da biste ga prikazali desno.</qt>"
 
-#: kpilot/todoWidget.cc:247
+#: kpilot/todoWidget.cpp:247
 #, fuzzy
 msgid "To-do info:"
 msgstr "Informacije o zadatku:"
 
-#: kpilot/todoWidget.cc:262
+#: kpilot/todoWidget.cpp:262
 #, fuzzy
 msgid "<qt>You can edit a to-do when it is selected.</qt>"
 msgstr "<qt>Možete uređivati zadatak kada je izabran.</qt>"
 
-#: kpilot/todoWidget.cc:270
+#: kpilot/todoWidget.cpp:270
 #, fuzzy
 msgid "<qt>Add a new to-do to the to-do list.</qt>"
 msgstr "<qt>Dodaje se novi zadatak u listu zadataka.</qt>"
 
-#: kpilot/todoWidget.cc:271
+#: kpilot/todoWidget.cpp:271
 msgid ""
 "<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
 "qt>"
 msgstr ""
 
-#: kpilot/todoWidget.cc:280
+#: kpilot/todoWidget.cpp:280
 #, fuzzy
 msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
 msgstr "<qt>Briše se trenutno izabrani zadatak iz liste zadataka.</qt>"
 
-#: kpilot/todoWidget.cc:408
+#: kpilot/todoWidget.cpp:408
 #, fuzzy
 msgid ""
 "You cannot add to-dos to the to-do list until you have done a HotSync at "
@@ -3248,81 +3248,81 @@ msgstr ""
 "Ne možete dodavati zadatke u listu zadataka sve dok se bar jednom ne uradi "
 "vruća sinhronizacija da bi se dobavio izgled baze podataka sa vašeg Pilot-a."
 
-#: kpilot/todoWidget.cc:411
+#: kpilot/todoWidget.cpp:411
 #, fuzzy
 msgid "Cannot Add New To-do"
 msgstr "Ne mogu da dodam novi zadatak"
 
-#: lib/actionQueue.cc:136
+#: lib/actionQueue.cpp:136
 msgid ""
 "The connection to the handheld was lost. Synchronization cannot continue."
 msgstr ""
 
-#: lib/actions.cc:54
+#: lib/actions.cpp:54
 msgid "KPilot %1 HotSync starting...\n"
 msgstr "KPilot %1 vruća-sinhronizacija započinje...\n"
 
-#: lib/actions.cc:56
+#: lib/actions.cpp:56
 #, fuzzy
 msgid "Using encoding %1 on the handheld."
 msgstr "Koristi se skup znakova %1 na ručnom računaru."
 
-#: lib/actions.cc:67
+#: lib/actions.cpp:67
 msgid "KPilot is busy and cannot process the HotSync right now."
 msgstr "KPilot je zauzet i trenutno ne može da obradi vruću sinhronizaciju."
 
-#: lib/actions.cc:114
+#: lib/actions.cpp:114
 msgid "Testing.\n"
 msgstr "Proba.\n"
 
-#: lib/actions.cc:130
+#: lib/actions.cpp:130
 msgid "Syncing database %1..."
 msgstr "Sinhronizujem bazu podataka %1..."
 
-#: lib/kpilotdevicelink.cc:148
+#: lib/kpilotdevicelink.cpp:148
 msgid "Could not open device: %1 (will retry)"
 msgstr "Nisam mogao da otvorim uređaj: %1 (pokušaću ponovo)"
 
-#: lib/kpilotdevicelink.cc:187
+#: lib/kpilotdevicelink.cpp:187
 msgid "Trying to open device %1..."
 msgstr "Pokušavam da otvorim uređaj %1..."
 
-#: lib/kpilotdevicelink.cc:241
+#: lib/kpilotdevicelink.cpp:241
 msgid "Already listening on that device"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:261
+#: lib/kpilotdevicelink.cpp:261
 #, fuzzy
 msgid "Cannot create socket for communicating with the Pilot (%1)"
 msgstr "Ne mogu da napravim soket za komunikaciju sa Pilot-om"
 
-#: lib/kpilotdevicelink.cc:289
+#: lib/kpilotdevicelink.cpp:289
 msgid "Cannot open Pilot port \"%1\". "
 msgstr "Ne mogu da otvorim Pilot-ov port '%1'. "
 
-#: lib/kpilotdevicelink.cc:391
+#: lib/kpilotdevicelink.cpp:391
 #, fuzzy
 msgid "Cannot listen on Pilot socket (%1)"
 msgstr "Ne mogu da slušam na Pilot-ovom soketu (%1)"
 
-#: lib/kpilotdevicelink.cc:411 lib/kpilotdevicelink.cc:426
+#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
 #, fuzzy
 msgid "Cannot accept Pilot (%1)"
 msgstr "Ne mogu da prihvatim Pilot-a (%1)"
 
-#: lib/kpilotdevicelink.cc:427
+#: lib/kpilotdevicelink.cpp:427
 msgid "already connected"
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:441
+#: lib/kpilotdevicelink.cpp:441
 msgid "Unable to read system information from Pilot"
 msgstr "Ne mogu da pročitam sistemske informacije iz Pilot-a"
 
-#: lib/kpilotdevicelink.cc:478
+#: lib/kpilotdevicelink.cpp:478
 msgid "Checking last PC..."
 msgstr "Proveravam posljednji PC..."
 
-#: lib/kpilotdevicelink.cc:487
+#: lib/kpilotdevicelink.cpp:487
 msgid ""
 "Could not read user information from the Pilot. Perhaps you have a password "
 "set on the device?"
@@ -3330,26 +3330,26 @@ msgstr ""
 "Nisam mogao da pročitam korisničke informacije iz Pilot-a. Možda je uređaj "
 "zaštićen šifrom?"
 
-#: lib/kpilotdevicelink.cc:670
+#: lib/kpilotdevicelink.cpp:670
 msgid "The Pilot device is not configured yet."
 msgstr "Pilot-ski uređaj još uvijek nije podešen."
 
-#: lib/kpilotdevicelink.cc:709
+#: lib/kpilotdevicelink.cpp:709
 msgid "Pilot device %1 is not read-write."
 msgstr "Pilot-ski uređaj %1 nije u režimu za čitanje i pisanje."
 
-#: lib/kpilotdevicelink.cc:719
+#: lib/kpilotdevicelink.cpp:719
 msgid ""
 "Pilot device %1 does not exist. Probably it is a USB device and will appear "
 "during a HotSync."
 msgstr ""
 
-#: lib/kpilotdevicelink.cc:765 lib/kpilotdevicelink.cc:774
+#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
 #, fuzzy
 msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
 msgstr "<qt>Ne mogu da instaliram datoteka '%1'.</qt>"
 
-#: lib/kpilotdevicelink.cc:846
+#: lib/kpilotdevicelink.cpp:846
 msgid "End of HotSync\n"
 msgstr "Kraj vruće sinhronizacije\n"
 
@@ -3371,88 +3371,88 @@ msgstr " Nemate dozvolu za otvaranje Pilot-skog uređaja."
 msgid " Check Pilot path and permissions."
 msgstr " Provjerite Pilot-ovu putanju i dozvole."
 
-#: lib/pilotDateEntry.cc:179
+#: lib/pilotDateEntry.cpp:179
 #, c-format
 msgid "Start date: %1"
 msgstr "Datum početka: %1"
 
-#: lib/pilotDateEntry.cc:185
+#: lib/pilotDateEntry.cpp:185
 msgid "Whole-day event"
 msgstr "Celodnevni događaj:"
 
-#: lib/pilotDateEntry.cc:193
+#: lib/pilotDateEntry.cpp:193
 #, c-format
 msgid "End date: %1"
 msgstr "Datum kraja: %1"
 
-#: lib/pilotDateEntry.cc:200
+#: lib/pilotDateEntry.cpp:200
 msgid ""
 "_: %1 is the duration, %2 is the time unit\n"
 "Alarm: %1 %2 before event starts"
 msgstr "Alarm: %1 %2 pre početka događaja"
 
-#: lib/pilotDateEntry.cc:204
+#: lib/pilotDateEntry.cpp:204
 msgid "minutes"
 msgstr "minuta"
 
-#: lib/pilotDateEntry.cc:205
+#: lib/pilotDateEntry.cpp:205
 msgid "hours"
 msgstr "časova"
 
-#: lib/pilotDateEntry.cc:206
+#: lib/pilotDateEntry.cpp:206
 msgid "days"
 msgstr "dana"
 
-#: lib/pilotDateEntry.cc:216
+#: lib/pilotDateEntry.cpp:216
 msgid "Recurrence: every %1 %2"
 msgstr "Ponavljanje: svakih %1 %2"
 
-#: lib/pilotDateEntry.cc:222
+#: lib/pilotDateEntry.cpp:222
 msgid "day(s)"
 msgstr "dana"
 
-#: lib/pilotDateEntry.cc:223
+#: lib/pilotDateEntry.cpp:223
 msgid "week(s)"
 msgstr "sedmica"
 
-#: lib/pilotDateEntry.cc:225
+#: lib/pilotDateEntry.cpp:225
 msgid "month(s)"
 msgstr "meseci"
 
-#: lib/pilotDateEntry.cc:226
+#: lib/pilotDateEntry.cpp:226
 msgid "year(s)"
 msgstr "godina"
 
-#: lib/pilotDateEntry.cc:235
+#: lib/pilotDateEntry.cpp:235
 msgid "Repeats indefinitely"
 msgstr "Ponavljaj beskonačno"
 
-#: lib/pilotDateEntry.cc:240
+#: lib/pilotDateEntry.cpp:240
 #, c-format
 msgid "Until %1"
 msgstr "Do %1"
 
-#: lib/pilotDateEntry.cc:244
+#: lib/pilotDateEntry.cpp:244
 msgid "Repeating on the i-th day of week j"
 msgstr "Ponavlja se i-tog dana sedmice j"
 
-#: lib/pilotDateEntry.cc:245
+#: lib/pilotDateEntry.cpp:245
 msgid "Repeating on the n-th day of the month"
 msgstr "Ponavlja se n-tog dana u mesecu"
 
-#: lib/pilotDateEntry.cc:263
+#: lib/pilotDateEntry.cpp:263
 msgid "Exceptions:"
 msgstr "Izuzeci:"
 
-#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
 msgid "<b><em>Note:</em></b><br>"
 msgstr "<b><em>Napomena:</em></b><br>"
 
-#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
+#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
 msgid "Note:\n"
 msgstr "Napomena:\n"
 
-#: lib/pilotMemo.cc:81
+#: lib/pilotMemo.cpp:81
 msgid ""
 "<i>Title:</i> %1<br>\n"
 "<i>MemoText:</i><br>%2"
@@ -3460,7 +3460,7 @@ msgstr ""
 "<i>Naslov:</i> %1<br>\n"
 "<i>Beleška:</i><br>%2"
 
-#: lib/pilotMemo.cc:86
+#: lib/pilotMemo.cpp:86
 msgid ""
 "Title: %1\n"
 "MemoText:\n"
@@ -3470,29 +3470,29 @@ msgstr ""
 "Beleška:\n"
 "%2"
 
-#: lib/pilotTodoEntry.cc:133
+#: lib/pilotTodoEntry.cpp:133
 msgid "Completed"
 msgstr "Završeno"
 
-#: lib/pilotTodoEntry.cc:135
+#: lib/pilotTodoEntry.cpp:135
 msgid "Not completed"
 msgstr "Nije završeno"
 
-#: lib/pilotTodoEntry.cc:143
+#: lib/pilotTodoEntry.cpp:143
 #, c-format
 msgid "Due date: %1"
 msgstr "Datum krajnjeg roka: %1"
 
-#: lib/pilotTodoEntry.cc:151
+#: lib/pilotTodoEntry.cpp:151
 #, c-format
 msgid "Priority: %1"
 msgstr "Prioritet: %1"
 
-#: lib/plugin.cc:73
+#: lib/plugin.cpp:73
 msgid "Unnamed"
 msgstr "Neimenovano"
 
-#: lib/plugin.cc:93
+#: lib/plugin.cpp:93
 msgid ""
 "<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
 "the changes before continuing?</qt>"
@@ -3500,24 +3500,24 @@ msgstr ""
 "<qt>Postavke provoda <i>%1</i> su izmenjene. Želite li da snimite izmjene "
 "pre nego što se nastavi dalje?</qt>"
 
-#: lib/plugin.cc:105
+#: lib/plugin.cpp:105
 msgid "%1 Conduit"
 msgstr "Provod %1"
 
-#: lib/plugin.cc:144
+#: lib/plugin.cpp:144
 #, fuzzy
 msgid "Send questions and comments to tdepim-users@kde.org"
 msgstr "Pošaljite pitanja i komentare na kde-pim@kde.org"
 
-#: lib/plugin.cc:194
+#: lib/plugin.cpp:194
 msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
 msgstr "Pošaljite pitanja i komentare na <a href=\"mailto:%1\">%2</a>."
 
-#: lib/plugin.cc:198
+#: lib/plugin.cpp:198
 msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
 msgstr "Pošaljite izvještaje o greškama na <a href=\"mailto:%1\">%2</a>."
 
-#: lib/plugin.cc:202
+#: lib/plugin.cpp:202
 msgid ""
 "For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
 "\">KPilot User's Guide</a>."
@@ -3525,19 +3525,19 @@ msgstr ""
 "Za informacije o registrovanoj robnoj marki, pogledajte <a href=\"help:/"
 "kpilot/trademarks.html\">KPilot-ov korisnički vodič</a>."
 
-#: lib/plugin.cc:213
+#: lib/plugin.cpp:213
 msgid "<b>Authors:</b> "
 msgstr "<b>Autori:</b> "
 
-#: lib/plugin.cc:234
+#: lib/plugin.cpp:234
 msgid "<b>Credits:</b> "
 msgstr "<b>Zasluge:</b> "
 
-#: lib/plugin.cc:480
+#: lib/plugin.cpp:480
 msgid "Large Changes Detected"
 msgstr ""
 
-#: lib/plugin.cc:482
+#: lib/plugin.cpp:482
 msgid ""
 "The %1 conduit has made a large number of changes to your %2.  Do you want "
 "to allow this change?\n"
@@ -3545,101 +3545,101 @@ msgid ""
 "\t%3"
 msgstr ""
 
-#: lib/plugin.cc:536
+#: lib/plugin.cpp:536
 #, fuzzy, c-format
 msgid "Could not find conduit %1."
 msgstr "Nisam mogao da pronađem provod %1."
 
-#: lib/plugin.cc:559
+#: lib/plugin.cpp:559
 #, fuzzy, c-format
 msgid "Could not load conduit %1."
 msgstr "Nisam mogao da učitam provod %1."
 
-#: lib/plugin.cc:571
+#: lib/plugin.cpp:571
 msgid "Conduit %1 has wrong version (%2)."
 msgstr ""
 
-#: lib/plugin.cc:581
+#: lib/plugin.cpp:581
 #, fuzzy, c-format
 msgid "Could not initialize conduit %1."
 msgstr "Nisam mogao da pronađem provod %1."
 
-#: lib/plugin.cc:594 lib/plugin.cc:603
+#: lib/plugin.cpp:594 lib/plugin.cpp:603
 #, fuzzy, c-format
 msgid "Could not create conduit %1."
 msgstr "Nisam mogao da napravim provod %1."
 
-#: lib/plugin.cc:607
+#: lib/plugin.cpp:607
 msgid "[Conduit %1]"
 msgstr "[Provod %1]"
 
-#: lib/plugin.cc:749
+#: lib/plugin.cpp:749
 msgid "Start: %1. End: %2. "
 msgstr ""
 
-#: lib/plugin.cc:751
+#: lib/plugin.cpp:751
 msgid "%1 new. "
 msgstr ""
 
-#: lib/plugin.cc:752
+#: lib/plugin.cpp:752
 #, fuzzy
 msgid "%1 changed. "
 msgstr "promenjeno"
 
-#: lib/plugin.cc:753
+#: lib/plugin.cpp:753
 #, fuzzy
 msgid "%1 deleted. "
 msgstr "obrisano"
 
-#: lib/plugin.cc:755
+#: lib/plugin.cpp:755
 #, fuzzy
 msgid "No changes made. "
 msgstr "nepromenjeno"
 
-#: lib/recordConduit.cc:69 lib/recordConduit.cc:289
+#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
 #, fuzzy
 msgid "Unable to open the %1 database on the handheld."
 msgstr "Ne mogu da otvorim baze podataka adresara na ručnom računaru."
 
-#: lib/recordConduit.cc:295
+#: lib/recordConduit.cpp:295
 #, fuzzy, c-format
 msgid "Unable to open %1."
 msgstr "Ne mogu da otvorim %1"
 
-#: lib/syncAction.cc:103
+#: lib/syncAction.cpp:103
 msgid "The conduit %1 could not be executed."
 msgstr "Provod %1 nije mogao da se izvrši."
 
-#: lib/syncAction.cc:205
+#: lib/syncAction.cpp:205
 #, fuzzy
 msgid "Full Synchronization"
 msgstr "Režim sinhronizacije"
 
-#: lib/syncAction.cc:209
+#: lib/syncAction.cpp:209
 #, fuzzy
 msgid "Restore From Backup"
 msgstr "Povrati Pilot-a iz rezervne kopije"
 
-#: lib/syncAction.cc:220
+#: lib/syncAction.cpp:220
 #, fuzzy
 msgid "Test Sync"
 msgstr "&Brzo sinhronizuj"
 
-#: lib/syncAction.cc:224
+#: lib/syncAction.cpp:224
 #, fuzzy
 msgid "Local Sync"
 msgstr "Bez sinhronizacije"
 
-#: lib/syncAction.cc:316 lib/syncAction.cc:428
+#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
 msgid "Question"
 msgstr "Pitanje"
 
-#: lib/syncAction.cc:335 lib/syncAction.cc:448
+#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
 #, fuzzy
 msgid "&Do not ask again"
 msgstr "Ne pitaj opet"
 
-#: lib/syncAction.cc:369 lib/syncAction.cc:481
+#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
 #, fuzzy
 msgid "Do not ask again"
 msgstr "Ne pitaj opet"