From 6afd9d8dddbe9e450690e05d498a503c00333a5e Mon Sep 17 00:00:00 2001 From: tpearson Date: Mon, 22 Feb 2010 19:31:25 +0000 Subject: Added KDE3 version of ksquirrel photo manager git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/ksquirrel@1094446 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- configure.in | 346 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 346 insertions(+) create mode 100644 configure.in (limited to 'configure.in') diff --git a/configure.in b/configure.in new file mode 100644 index 0000000..7937ad6 --- /dev/null +++ b/configure.in @@ -0,0 +1,346 @@ +dnl ======================================================= +dnl FILE: ./admin/configure.in.min +dnl ======================================================= + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +# Original Author was Kalle@kde.org +# I lifted it in some mater. (Stephan Kulow) +# I used much code from Janos Farkas + +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(acinclude.m4) dnl a source file from your sub dir + +dnl This is so we can use kde-common +AC_CONFIG_AUX_DIR(admin) + +dnl This ksh/zsh feature conflicts with `cd blah ; pwd` +unset CDPATH + +dnl Checking host/target/build systems, for make, install etc. +AC_CANONICAL_SYSTEM +dnl Perform program name transformation +AC_ARG_PROGRAM + +dnl Automake doc recommends to do this only here. (Janos) +AM_INIT_AUTOMAKE(ksquirrel, 0.8.0) dnl searches for some needed programs + +KDE_SET_PREFIX + +dnl generate the config header +AM_CONFIG_HEADER(config.h) dnl at the distribution this done + +dnl Checks for programs. +AC_CHECK_COMPILERS +AC_ENABLE_SHARED(yes) +AC_ENABLE_STATIC(no) +KDE_PROG_LIBTOOL + +dnl for NLS support. Call them in this order! +dnl WITH_NLS is for the po files +AM_KDE_WITH_NLS + +KDE_USE_QT(3.3) +AC_PATH_KDE +dnl ======================================================= +dnl FILE: configure.in.in +dnl ======================================================= + +#MIN_CONFIG(3.3) + +dnl PACKAGE set before + +sq_kipi="yes" +AC_ARG_ENABLE(kipi, + [AS_HELP_STRING([--disable-kipi], [don't search for KIPI plugins [default=no]])], + [ case "${enableval}" in + yes) sq_kipi="yes" ;; + no) sq_kipi="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;; + esac] + ) + +sq_kexif="yes" +AC_ARG_ENABLE(kexif, + [AS_HELP_STRING([--disable-kexif], [don't search for KEXIF [default=no]])], + [ case "${enableval}" in + yes) sq_kexif="yes" ;; + no) sq_kexif="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;; + esac] + ) + +have_kpart="yes" +AC_ARG_ENABLE(kpart, + [AS_HELP_STRING([--disable-kpart], [don't compile Konqueror integration (KPart object) [default=no]])], + [ case "${enableval}" in + yes) ;; + no) have_kpart="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;; + esac] + ) + +AM_CONDITIONAL(SQ_HAVE_KPART, test x$have_kpart = xyes) + +have_klconf="yes" +AC_ARG_ENABLE(ksquirrel-libs-configurator, + [AS_HELP_STRING([--disable-ksquirrel-libs-configurator], [don't compile ksquirrel-libs configurator [default=no]])], + [ case "${enableval}" in + yes) ;; + no) have_klconf="no" ;; + *) AC_MSG_ERROR([bad value ${enableval} for this parameter]) ;; + esac] + ) + +AM_CONDITIONAL(SQ_HAVE_KLCONF, test x$have_klconf = xyes) + +# utime.h +AC_CHECK_HEADER([utime.h], AC_DEFINE([HAVE_UTIME_H], [], [utime.h support]), []) + +PKG_CHECK_MODULES([ksquirrellibs], ksquirrellibs, [ + + __cppflags=$CPPFLAGS + + CXXFLAGS="$ksquirrellibs_CFLAGS $CXXFLAGS" + CPPFLAGS="$ksquirrellibs_CFLAGS $CPPFLAGS" + + AC_SUBST(ksquirrellibs_LIBS) + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + AC_CHECK_HEADERS([ksquirrel-libs/fileio.h], [], + [AC_MSG_ERROR([Ksquirrel-libs development files are not installed. Please install them first.])]) + + # restore language & CPPFLAGS + CPPFLAGS=${__cppflags} + AC_LANG_RESTORE + ], + [AC_MSG_ERROR([Ksquirrel-libs development file (.pc) is not installed. Please install ksquirrel-libs first.])] +) + +KDE_CHECK_HEADER(konq_operations.h, [], AC_MSG_ERROR("Header file konq_operations.h is missing. Please install libkonq-devel package.")) +KDE_CHECK_HEADER(kregexpeditorinterface.h, [AC_DEFINE([SQ_HAVE_KREGEXP], [], [kregexpeditorinterface.h support])], []) + +# Checks for OpenGL. +KDE_CHECK_HEADER([GL/gl.h], [], AC_MSG_ERROR("ksquirrel needs OpenGL (GL/gl.h, ...) and GLU (GL/glu.h) headers to be installed.")) + +AC_CHECK_LIB([GL], [glBegin], [LDFLAGS="-lGL $LDFLAGS"], [ogl="no"]) + +if test "x$ogl" = "xno"; then + AC_MSG_NOTICE([Maybe libGL requires libpthread...]) + unset ac_cv_lib_GL_glBegin + AC_CHECK_LIB([GL], [glBegin], [LDFLAGS="-lpthread -lGL $LDFLAGS"], AC_MSG_ERROR([Cannot use -lGL]), [-lpthread]) +fi + +AM_PROG_AS + +# MMX test duped from kdelibs/kdefx - it should be probably moved to admin/ +dnl ----------------------------------------------------- +dnl IA32 checks +dnl ----------------------------------------------------- + +ksquirrel_asm_defs= +case $host_cpu in + i*86 ) + AC_MSG_CHECKING(for assembler support for IA32 extensions) + + dnl MMX check + AC_TRY_COMPILE(, [ __asm__("pxor %mm0, %mm0") ], + [ + echo $ECHO_N "MMX yes$ECHO_C" + AC_DEFINE_UNQUOTED(HAVE_X86_MMX, 1, [Define to 1 if the assembler supports MMX instructions.]) + ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_MMX" + ], [ echo $ECHO_N "MMX no$ECHO_C" ]) + + dnl SSE check + AC_TRY_COMPILE(,[ __asm__("xorps %xmm0, %xmm0") ], + [ + echo $ECHO_N ", SSE yes$ECHO_C" + AC_DEFINE_UNQUOTED(HAVE_X86_SSE, 1, [Define to 1 if the assembler supports SSE instructions.]) + ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_SSE" + ], [ echo $ECHO_N ", SSE no$ECHO_C" ]) + + dnl SSE2 check + AC_TRY_COMPILE(, [ __asm__("xorpd %xmm0, %xmm0") ], + [ + echo $ECHO_N ", SSE2 yes$ECHO_C" + AC_DEFINE_UNQUOTED(HAVE_X86_SSE2, 1, [Define to 1 if the assembler supports SSE2 instructions.]) + ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_SSE2" + ], [ echo $ECHO_N ", SSE2 no$ECHO_C" ]) + + dnl 3DNOW check + AC_TRY_COMPILE(, [ __asm__("femms") ], + [ + echo $ECHO_N ", 3DNOW yes$ECHO_C" + AC_DEFINE_UNQUOTED(HAVE_X86_3DNOW, 1, [Define to 1 if the assembler supports 3DNOW instructions.]) + ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_X86_3DNOW" + ], [ echo $ECHO_N ", 3DNOW no$ECHO_C" ]) + echo + ;; + powerpc ) + AC_MSG_CHECKING(for assembler support for AltiVec instructions) + dnl AltiVec check + AC_TRY_COMPILE(, [ __asm__("mtspr 256, %0\n\t" "vand %%v0, %%v0, %%v0" : : "r"(-1) ) ], + [ + echo $ECHO_N " yes$ECHO_C" + AC_DEFINE_UNQUOTED(HAVE_PPC_ALTIVEC, 1, [Define to 1 if the assembler supports AltiVec instructions.]) + ksquirrel_asm_defs="$ksquirrel_asm_defs -DHAVE_PPC_ALTIVEC" + ], [ echo $ECHO_N ", AltiVec no$ECHO_C" ]) + echo + ;; +esac + +KSQUIRREL_ASM_DEFS="$ksquirrel_asm_defs" +AC_SUBST(KSQUIRREL_ASM_DEFS) + +# +# KIPI +# +have_kipi=no +if test x$sq_kipi = xyes; then +PKG_CHECK_MODULES([libkipi], libkipi, [ + _cxxflags=$CXXFLAGS + _ldflags=$LDFLAGS + + CXXFLAGS="$libkipi_CFLAGS $CXXFLAGS" + LDFLAGS="$LDFLAGS $libkipi_LIBS" + + KDE_CHECK_HEADER(libkipi/interface.h, have_kipi=yes, have_kipi=no) + if test "$have_kipi" = "yes"; then + AC_DEFINE(SQ_HAVE_KIPI, [], [If we have libkipi installed]) + else + AC_WARN([Can't find KIPI headers, KSquirrel won't be compiled with KIPI support]) + fi + + CXXFLAGS=$_cxxflags + LDFLAGS=$_ldflags + ], + [AC_WARN([KIPI development file (.pc) was not found. KIPI support will be disabled.])] +) +fi + +# +# KEXIF +# +have_kexif=no +if test x$sq_kexif = xyes; then +PKG_CHECK_MODULES([libkexif], libkexif, [ + _cxxflags=$CXXFLAGS + _ldflags=$LDFLAGS + + CXXFLAGS="$libkexif_CFLAGS $CXXFLAGS" + LDFLAGS="$LDFLAGS $libkexif_LIBS" + + KDE_CHECK_HEADER(libkexif/kexifdata.h, have_kexif=yes, have_kexif=no) + if test "$have_kexif" = "yes"; then + AC_DEFINE(SQ_HAVE_KEXIF, [], [If we have libkexif installed]) + else + AC_WARN([Can't find KEXIF headers, KSquirrel won't be compiled with KEXIF support]) + fi + + CXXFLAGS=$_cxxflags + LDFLAGS=$_ldflags + ], + [AC_WARN([KEXIF development file (.pc) was not found. KEXIF support will be disabled.])] +) +fi + +AM_CONDITIONAL(SQ_HAVE_KIPI, test x$have_kipi = xyes) +AM_CONDITIONAL(SQ_HAVE_KEXIF, test x$have_kexif = xyes) +KDE_CREATE_SUBDIRSLIST +AC_CONFIG_FILES([ Makefile ]) +AC_CONFIG_FILES([ doc/Makefile ]) +AC_CONFIG_FILES([ doc/ru/Makefile ]) +AC_CONFIG_FILES([ ksquirrel/Makefile ]) +AC_CONFIG_FILES([ ksquirrel/imageedit/Makefile ]) +AC_CONFIG_FILES([ ksquirrel/ksquirrel-libs-configurator/Makefile ]) +AC_CONFIG_FILES([ ksquirrel/ksquirrelpart/Makefile ]) +AC_CONFIG_FILES([ ksquirrel/mime/Makefile ]) +AC_CONFIG_FILES([ ksquirrel/sidebar/Makefile ]) +AC_CONFIG_FILES([ pics/Makefile ]) +AC_CONFIG_FILES([ pics/imageedit/Makefile ]) +AC_CONFIG_FILES([ pics/menu/Makefile ]) +AC_CONFIG_FILES([ pics/toolbar/Makefile ]) +AC_CONFIG_FILES([ po/Makefile ]) +AC_OUTPUT +echo +echo "Results:" +echo "--------" +echo +echo "Version: ${VERSION}" +echo "KPart object: $have_kpart" +echo "ksquirrel-libs configurator: $have_klconf" +echo +echo "C compiler: ${CC}" +echo "C++ compiler: ${CXX}" +echo "CXXFLAGS: ${CXXFLAGS}" +echo +echo "Prefix: ${prefix}" +echo "KDE prefix: ${kde_libs_prefix}" +echo +echo "KIPI support: ${have_kipi}" +echo "KEXIF support: ${have_kexif}" +echo "ASM flags: ${KSQUIRREL_ASM_DEFS}" +# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure +if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then + # And if so, warn when they don't match + if test "$kde_libs_prefix" != "$given_prefix"; then + # And if kde doesn't know about the prefix yet + echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null + if test $? -ne 0; then + echo "" + echo "Warning: you chose to install this package in $given_prefix," + echo "but KDE was found in $kde_libs_prefix." + echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" + echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" + echo "Then restart KDE." + echo "" + fi + fi +fi + +if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then + echo "" + echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" + echo "was not included. Therefore, GCC symbol visibility support remains disabled." + echo "" + echo "For better performance, consider including the Qt visibility supporting patch" + echo "located at:" + echo "" + echo "http://bugs.kde.org/show_bug.cgi?id=109386" + echo "" + echo "and recompile all of Qt and KDE. Note, this is entirely optional and" + echo "everything will continue to work just fine without it." + echo "" +fi + +if test "$all_tests" = "bad"; then + if test ! "$cache_file" = "/dev/null"; then + echo "" + echo "Please remove the file $cache_file after changing your setup" + echo "so that configure will find the changes next time." + echo "" + fi +else + echo "" + echo "Good - your configure finished. Start make now" + echo "" +fi -- cgit v1.2.1