From a6d58bb6052ac8cb01805a48c4ad2f129126116f Mon Sep 17 00:00:00 2001 From: tpearson Date: Wed, 24 Feb 2010 02:13:59 +0000 Subject: Added KDE3 version of kvirc git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/kvirc@1095341 283d02a7-25f6-0310-bc7c-ecb5cbfe19da --- INSTALL | 753 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 753 insertions(+) create mode 100644 INSTALL (limited to 'INSTALL') diff --git a/INSTALL b/INSTALL new file mode 100644 index 00000000..fc7caf68 --- /dev/null +++ b/INSTALL @@ -0,0 +1,753 @@ +Szymon Stefanek Mon Mar 04 2008 +############################################################################### +General notes for the installation of the 3.4.0 release of KVIrc +############################################################################### + + This document contains the procedures to compile and install + the version 3.4.0 of KVIrc. + +############################################################################### +# 0. Table of contents +############################################################################### + + 1. Introduction + 2. Guru-level installation + 3. Hacker-level installation + 4. Human (detailed) installation instructions + 5. How to compile KVIrc with Qt-embedded + 6. Compiling KVIrc on Mac OS X + 7. A note about Windows 95/98/ME + +############################################################################### +# 1. Introduction +############################################################################### + + This document contains the procedures to compile and install + the version 3.4.0 of KVIrc. + + If you have found this document in a binary distribution then + KVIrc has been probably already installed by your favorite package + manager and maybe something is not working as expected. In this case + this document and the accompanying FAQ can help you in guessing + what's wrong. + + If you have found this document in a source distribution or you + have downloaded it by using the svn then well... + this is a standard INSTALL file :) + +############################################################################### +# 2. Guru installation: +############################################################################### + + # ./configure + # make install + +############################################################################### +# 3. Hacker installation: +############################################################################### + + If you're compiling the svn version of KVirc run ./autogen.sh + (You NEED automake >= 1.5 for autogen.sh to run). + + # export QTDIR="your qtlibrary path" + + eventually: + + # export KDEDIR="your kde library path" + + We're using GNU tools here. + + # ./configure --help + # ./configure [your options] + # make + # make install + +############################################################################### +# 4. Human (detailed) installation: +############################################################################### + + If you're not a guru, or have problems with the installation + read these instructions carefully. + + ### + ### Step 0 (ONLY FOR THE SVN VERSION) + ### + + If (*** AND ONLY IF ***) you're compiling the svn version of kvirc + you need to generate the configure script. If you're compiling + a downloaded tar.gz (or tar.bz2) package or you don't know what + svn is then jump directly to step 1! + + You need a recent automake and autoconf installed on your system. + It is also reccomended to have a recent (matching) libtool installed + (libtool is not strictly necessary since KVIrc has a bundled one, + but a libtool matching your automake/autoconf versions will probably + run better on your system). + + Anyway, run: + + # ./autogen.sh + + If it runs without any error (it will tell you "Done") then + you may skip to step 1, otherwise read on. + + First of all check your auomake version. + You need automake >= 1.5: older versions will NOT WORK. + You can check the automake version with the command + + # automake --version + + If your automake version is lower than 1.5 upgrade it. + You can find it at http://www.gnu.org/software/automake/ (source) + or on your favorite distribution site as auto-installing package. + + Automake installation tip: automake installs in /usr/local/ + by default. If you have an older automake installation that + resides in /usr/ it's better to remove it or (better) overwrite it + with the new installation. + If you choose to overwrite the old installation with the new + one then just use "./configure --prefix=/usr" as the automake's + configure command. + If you choose to remove the old version then the files to be + removed are /usr/bin/automake /usr/bin/aclocal /usr/share/automake + /usr/share/aclocal. If you feel unsure about removing it, rename it. + + If the script fails to run then you might try + + # ./autogen.sh --bundled-libtool + + to force the usage of the bundled libtool version. + If you later have unexplicable problems with the compilation tools + you might also try the bundled libtool. + + ### + ### Step 1 : Matching the requirements + ### + + - You NEED a fully working C++ compiler. + + Most linux distributions have it pre-installed and if you have + already compiled other programs before then you're probably ok, + so actually skip this check and go ahead. If anything fails + in the following steps then this is the very first thing to verify. + A broken compiler installation usually manifests itself + in failed ./configure tests (dlopen capabilities). + Try + + # gcc -v + # g++ -v + + on the commandline. If it says something about "command not found" + then you miss some gcc related package. Install it from the distro cd. + + + - You NEED the Qt library. + + You can download the latest version from ftp://ftp.trolltech.com. + The main Qt www site is http://www.trolltech.com. + Note for the GPL maniacs: Qt IS GPL. + The minimum required version is 3.1.2 (older versions *might* work) + Download and install it by following the rules + explained in the excellent documentation that comes with the library. + + + - You need a decent pthread implementation. + + This is usually included in your distribution and is probably + already installed. The library is called libpthread.so. + You can look for it with the "find" command: + + # find / -name libpthread.so + + On my system the output is: + + # /usr/lib/libpthread.so + + If you don't have it (the configure script will tell you) + you can download it from your favorite GNU mirror. + + On Solaris you can use the native libthread.so library instead + but you will have to pass the specific option to configure (see below). + FreeBSD has a native implementation of pthreads in libc_r and + the gcc compiler has a special -pthread flag to link to it. + If you're on FreeBSD, use the --with-freebsd-pthread configure + option and make sure that you don't have other pthread wrappers + installed (that might collide with the native header files). + + The configure script will also fail if the library is + hidden somewhere on your system (eg. not in /lib , /usr/lib or + /usr/local/lib): you should probably move it. + + + - You need the dynamic linker interface library libdl.so. + + This is usually installed on your system , so don't care until + configure complatins about it. Some system have the interface + builtin in libc. The configure script can detect it. + + + - (Optional) If you want to compile the KDE integration support + you obviousy need KDE. The kdelibs package should suffice. + + + - (Optional) If you want the translations to non-english languages to work + then you need the GNU gettext package. In particular KVIrc uses + the msgfmt program. + + This is usually included in your distribution and is probably + already installed. You can check it by running + + # msgfmt --version + + KVIrc will not complain if the command above is missing: it will + just skip the creation of the translation files. + If the command above fails then you need to install the gettext package + if you want any language other than english. + + + - (Optional) If you want DCC VOICE to support the gsm codec, + you need a recent copy of libgsm. This is not strictly required + at compile time since KVIrc will look for the library at run-time, + and only if the DCC VOICE with the gsm codec is requested. + You can check for libgsm using the 'find' command. + + # find / -name libgsm* + + The output should be sometihg like + + # /usr/lib/libgsm.so + + This library is included in most distributions. Some distros ship + only the static version of the library "libgsm.a": if the previous + find returned only something similar to "/usr/lib/libgsm.a" , you might + create manually the shared archive by running: + + # cd /usr/lib + # ld --whole-archive -shared -o libgsm.so.1 libgsm.a + # ln -s libgsm.so.1 libgsm.so + # ldconfig + + If you don't have it installed at all, you might have a look in your + distribution CD, or download it from the web. + + + - (Optional) If you want the /snd plugin to play various audio formats + you either need a running artsd, a running esd or a reasonably recent + audiofile library. Without these KVIrc will be only able to play *.au + files. + + + - (Optional) If you want to generate the on-line documentation + you also need perl: any version will do (I guess). + + + - (Optional) If you want the secure socket layer support to be compiled + you need the OpenSSL library and headers. (libssl.so and openssl/ssl.h) + + + - (Optional) If you want perl scripting support to be compiled + you need a working perl installation. Your libperl.so MUST be compiled + with the MULTIPLICITY option. (You can check it with perl -V). + + ### + ### Step 2 : Running the configure script (mandatory) + ### + + First of all you must run the configure script that will guess some + info about your system and prepare the compilation. + You may try to "simply run" it and check if it works...the configure + script tries to be smart , but in some cases it will fail. + + So before running the script make sure that the enviroinement + variable $QTDIR points to the right location. This will help + in finding the correct version of Qt. + You might eventually set it with the command: + + # export QTDIR="your qt dir" + + On my system qt is installed in /usr/local/kde/qt + so I actually execute + + # export QTDIR="/usr/local/kde/qt" + + If you want to compile the KDE support you might want to do the same + with KDEDIR + + # export KDEDIR="your kde dir" + + In my case KDE is installed in /usr/local/kde so I use + + # export KDEDIR="/usr/local/kde" + + The configure script has a lot of options that can be listed by using + + # ./configure --help + + Here's a list with explainations (the most common are at the top): + + --enable-debug + This is for debugging and reporting problems. + It sets the compiler options in order to leave the debugging + informations into the kvirc executable and the libraries. + In this way you will be able to produce a gdb backtrace + in case of a crash. + YOU NEED THIS OPTION IF YOU WANT TO REPORT A PROGRAM CRASH. + + --enable-pipes + Asks the compiler to use pipes instead of files for the + compilation stage. The pipes will help in reducing disk usage and + will probably shorten the compilation a bit. Use this option if + your platform supports it. + + --with-qt-library-dir= + Look for the qt library in . + You might want to use this if the configure script has trouble + in finding the qt library. + You should have no problems if you use export QTDIR="" + before launching the configure script, but it might help you + if you have a non standard Qt installation. + + --with-qt-include-dir= + Look for the qt headers in . + You might want to use this if the configure script has trouble + in finding the qt headers. It may especially help if your headers + are in a place different than $QTDIR/include (and thus you have + a non standard installation) + + --with-qt-moc= + Use the qt meta-object compiler found in + The path is usually $QTDIR/bin/moc , and the + configure script will find it if you have a standard + Qt installation and $QTDIR points to the right directory. + Thus should have no problems if you use export QTDIR="" + before launching the configure script, but it might help you + if you have a non standard Qt installation. + This will also help if you have the moc compiler renamed + in some way: like "moc2" or sth... + in this case is a FULL path: directory/program_name! + + --disable-qt-check + This disables Qt checking at compilation time. + If this is the only way to compile and run + the kvirc executable , then there is something + wrong with the configure script. + + --without-kde-support + The configure script will look for the KDE headers and libraries + and if found it will enable the KDE support. If you don't want + the KDE support even if KDE is detected, just use this switch. + + --with-kde-library-dir= + Look for the KDE libraries in + If $KDEDIR points to the right place, you shouldn't need this. + + --with-kde-include-dir= + Look for the KDE headers in + If $KDEDIR points to the right place, you shouldn't need this. + + --with-kde-services-dir= + Install the kde service protocol files in + If $KDEDIR points to the right place, you shouldn't need this. + This is also non-critical for kvirc: if the configure script + can't find this directory, you will only looose the support for + irc:// urls in konqueror + + --without-kde-check + Similar to --without-qt-check but for KDE. + + --enable-optimisation= + Enables the compiler optimisation flag -o. + Possible values are 0 , 1, 2 and 3 (but if you compiler supports + more optimisation levels , you might use other numbers here). + Increases compilation time but may produce a slightly faster + executable. + + --with-other-libs= + Explicitly link to the specified libraries. + Example: --with-other-libs="-lmylib -lstrangesystemsupport" + + --with-other-ldirs= + Explicitly add the specified library search paths + Example: --with-other-ldirs="-L/home/pippo/lib/ -L/my/library/" + + --with-other-idirs + Explicitly add the specified include search path + Example: --with-other-idirs="-I/home/pippo/include/ -I/tmp/inc/" + + --enable-objprelink + This is an experimental support for object prelinking that improves + significantly the executable startup time. In order to use it you + need to have the "objprelink" program in the PATH. The objprelink + program is included in the distribution in the admin directory. + In order to use it, you will need to: + + # cd admin + # make objprelink + # cp objprelink /somewhere_on_your_path + + All this AFTER running ./configure and BEFORE running make. + + --with-no-pthread-check + Do not check if the pthread stuff works. + If configure fails in the pthread library check , you might want to + try this...(but then you will have really to "pray" that + the check has been broken by some "unusual" conditions and the + compilation will succeed). + + --x-includes=DIR + Specifies explicitly the path to the X header files. + You might want to use this if the configure script + has trouble in finding it. + + --x-libraries=DIR + Specifies explicitly the path to the X libraries. + You might want to use this if the configure script + has trouble in finding it. + + --with-qt-name= + Use instead of "qt" as the Qt library name. + This is useful on systems where Qt has been installed with + a name different than the default "qt". + It happens often that to allow multiple copies of qt to work + the newest have the version name appended to it. + For example, on FreeBSD I have found "qt" being Qt1.* and + "qt2" being Qt 2.*. Since you need Qt 2.* for kvirc to work, + you will need to use --with-qt-name=qt2. + If you use this option, you will probably also need to remap + the moc compiler path/name with --with-qt-moc. + + --disable-qt-mt + Disable checking for the multithreaded version of Qt. + By default , KVIrc will try to link to the multithreaded version + if found on the system. + NOTE: if you enable the KDE support , KVIrc MUST be linked to the + qt library that KDE is linked to. + + --with-ix86-asm + KVIrc contains some ix86 assembly routines that *could* + performs some things faster (this is not always true, depends + on the compiler). You might want to try it if your kvirc seems to + be really slow... + + --without-ipv6-support + The IPV6 support is compiled by default on the platforms that + support it: this option disables it. + Even if you have a plain IPV4-only connection, you might want to + keep the IPV6 support: you will be able to lookup IPV6 hostnames. + + --without-system-memmove + This will disable the use of the system memmove() memcpy() and + memset() functions and enable the bundled implementations. Use + it if you have undefined references to these functions while + compiling. + + --with-ignore-sigalarm + This is a hack mainly for Solaris. + Use this option if kvirc exits with no apparent reason and + the system prints a message related to an "Alarm" :) + + This is a mail that suggests an explaination for the SIGALARM fault. + If you experience the problem please drop me a mail at pragma at kvirc dot net + and we'll try to look for a solution. + + From: "Andre Stechert" (astechert at email dot com) + Date: 26/7/2005 09:36 + + Hi, +         I noticed in your readme that you were having problems with sigalarm + in your solaris port and you weren't sure why.  I quickly scanned your + source code and noticed that you use usleep and threads.  That's the problem, + if you haven't already figured it out. On Solaris, usleep is implemented with + SIGALARM. So is threading. So if you the active thread changes while + a usleep is in progress, bang, the process is dead. + + --without-crypt-support + Disables the cryptographic engines and the whole + cryptography/text-transformation support. Produces a slightly + smaller executable. Anyway, if you don't know what the + ctryptography/text-transformation + support is ,I suggest you to avoid using this option. + + --enable-new-kvs + Developers only! + This enables the compilation of the new KVS parser, currently + under heavy development. This will produce a bigger and possibly + unstable executable: do not use if you don't know what you're doing. + + --enable-new-kvs-only + Developers only! + This hardwires the new KVS parser to be used as the main scripting + engine in KVIrc. Be aware that the new KVS engine is NOT YET 100% COMPLETE + so some scripts will simply fail. + + --without-transparency + This option disables pseudo-transparency support. + The pseudo transparency support makes the KVirc windows + look like semi-transparent (this is NOT real transparency: this is + just a nice-looking hack). + If KDE support is enabled, KVirc will have an option that + makes all windows use a faded KDE desktop background image + as background. Without KDE support you will be able to choose + a fake background image and use it as background. (You can still + choose your desktop wallpaper: this will (more-or-less) work in + all the window managers). + It is cool-looking but usually eats some memory when enabled. + It also eats some executable size. + So this option allows to disable the pseudo-transparency. + + --with-solaris-lthread + If you're on Solaris and don't have the pthread library (A wrapper + I guess) you might try this option: it attempts to use the native + Solaris threading support. + + --with-freebsd-pthread + If you're on FreeBSD, you NEED this option. This enables the usage + of the native FreeBSD pthread implementation found in libc_r. + This requires you to use the native gcc compiler: it has a special + -pthread flag that enables the linkage to libc_r instead + of plain libc. + + --with-libresolv + Link to libresolv. I guess that this is required for Solaris + + --with-libsocket + Link to libsocket. I guess that this is required for Solaris + + --with-libnsl + Link to libnsl. I guess that this is required for Solaris + + --with-libcompat + Link to libcompat. This might be required for some systems... + but I have no idea which ones. If you find it useful: mail me. + + --enable-fno-rtti + Disables compiler runtime type information generation. + This is probably needed only with qt-embedded. + DON'T use it if you don't exactly know what it does. + Actually this may even make KVIrc crash in some situations. + For example the KDE sources use __dynamic_cast... + + --disable-x-support + Disables completely the X Windows support. + This is useful in environments where X is not needed to compile KVIrc + such as Qt-Mac on MacOSX, QtEmbedded or Windows. + This switch implies also --without-x-bell + + --without-x-bell + Disables the usage of the XBell function (needed if you want to + compile KVIrc with qt-embedded (no X at all)) + This is implied by --disable-x-support + + --with-qt-embedded + You need this to compile KVIrc with qt-embedded + + --without-ipc + Disables support for inter-process communication. + You will be not able to send remote commands to running + kvirc sessions: this basically means that every time you run + the kvirc executable , a new session will be started. + If you don't use this switch, a new session will be started + only if no session is running on the same display or + "new session" has been forced by a commandline switch. + If a session is already running, the commandline will be + passed to that session via IPC (X-event-based communication). + This option saves some KB of the KVIrc executable, + so if you're really short in memory , you might use it, + otherwise, IPC is a nice feature. + + --without-dyn-labels + You should not need this option. + It disables compilation of code that relies on a particular + compiler feature (jumping to a dynamic label with a goto). + Not all compilers support this , but configure shoud detect + it automatically. Anyway , if you get compilation errors on + kvi_ircview.cpp, you may try this option... + This may also help if the configure script seems to hang + when checking for the "compiler dynamic label support". + + --without-splash-screen + Do not compile the splash screen code. + This will remove you that nice "banner" image that pops up + while kvirc is starting up. It will maybe help in making an + executable smaller by a couple of KB and save a couple + of extra milliseconds during the startup. Use it if you're + tring to build a performance critical executable and you're + short both in memory and CPU time :) + + --without-gsm + Explicitly disable the usage of the GSM library. This will + disable the DCC VOICE gsm codec but might help when the + compilation stops complaining of something related to GSM :) + + --without-dcc-sound + Explicitly disable the DCC VOICE sound support. This might help + if you have problems in compilation of src/modules/dcc/voice.cpp. + It will disable the sound support + (and thus make DCC VOICE not usable). + + --disable-ssl + Disables the secure socket layer support. The SSL support is + automatically enabled if OpenSSL is detected at ./configure time. + This option forces it to be left out. + + --with-memory-profile + Debug stuff...enables memory allocation profiling (don't use it :) + + --with-memory-checks + Enables malloc() memory checks. This will print a nice message + if your system goes out of memory... + It can't save you from buying new RAM, + but at least you will know that your system went out of memory + and it is not a proper kvirc fault. Actually you probably have + no reason in using it. + + --with-big-channels + Minor hash table optimisations: higher memory usage but + faster user lookups. Use it if you often stay in channels with + a lot of users. (this is not critical anyway) + + --enable-profiling + Asks the compiler/linker to include profiling informations in the + executable. This is useful only if you want to profile KVIrc by + using the gprof program. Note that this will generate a bigger + and slower executable. + + --disable-perl + Forcibly disable perl support. + + So finally you have to run + + # ./configure + + For example , my common options are: + + # ./configure --enable-pipes --enable-debug + + On FreeBSD I have found useful this command line: + + # ./configure --with-qt-name=qt2 --with-qt-moc=//moc2 \ + --with-freebsd-pthread + + Once the configure script ran succesfully you can go to the next step. + + ### + ### Step 3 : Compiling (mandatory) + ### + + This step is easy: + Cross your fingers and run + + # make kvirc + + If your make is not a GNU make (this happens on FreeBSD for example) + you should use "gmake" instead. + The compilation process will take from 6-7 minutes to several hours + depending on the machine capabilities and load. + If you have a slow cpu but have a couple of computers in a lan you + might consider using distcc to distribute the compilation. + + Once the compilation has been succesfull, run + + # make install + + Same as above: use "gmake install" if your make is not GNU make. + + This will install the executable in /usr/local/bin + (if you don't have specified a different --prefix option in + the configure script) , the libraries in /usr/local/lib + and the shared data in /usr/local/share/kvirc. + If you had a previous kvirc installation , the default prefix + will be referring to the directory where the old kvirc + executable was found. + + Make sure that /usr/local/lib is in your /etc/ld.so.conf , + if it isn't there , put it there and run + + # ldconfig + + If you have decided to use the KDE support the installation + might have placed all these files in your $KDEDIR tree + instead of /usr/local. In this case you should be OK since + KDE requires its library dir to be in /etc/ld.so.conf + + ### + ### Step 4: Having fun + ### + + # kvirc & + + That's all folks. + + +############################################################################### +# 5. Compiling KVIrc on qt-embedded +############################################################################### + + Do you want KVIrc 3 on your hand computer ? + On your Nokia 9999910 ? + On your LINUX CONSOLE? + + Well, for the third it's really easy, just follow carefully those steps: + + 1. Install qt-embedded libraries (including the development files). + This can be as easy as: apt-get install libqt-emb-dev on Debian. + + 2. cd to the KVIrc3 source directory + + 3. run configure with the following parameters: + + # ./configure --with-qt-name=qte --with-fno-rtti --without-x-calls + --without-ipc --without-splash-screen --without-transparency + --with-qt-embedded --without-x-bell + + then run make and make install as usual + + 4. Try to have a life for the next minutes while kvirc3 compiles + + 5. You need your kernel with framebuffer support (it's under 'Console') + so if your kernel don't have it reconfigure and recompile your kernel. + + 6. switch to a console + + 7. export QTDIR=[path] On Debian is '/usr' + + 8. Read http://doc.trolltech.com/3.0/envvars.html and configure your + environment vars until kvirc3-emb loads (it will give you an error + indicating what went wrong else). Pay especial attention to + QWS_MOUSE_PROTO, QWS_CARD_SLOT and QWS_DISPLAY + + 9. Enjoy :) + +############################################################################### +# 6. Compiling KVIrc on MacOSX +############################################################################### + + There is a detailed compilation and installation HOWTO for MacOSX systems + located in the doc dorectory. + +############################################################################### +# 7. A note about Windows 95/98/ME +############################################################################### + + On Windows versions prior to 2000 the KVIrc binary may refuse to start + because of an incompatible msvcrt.dll included in the distribution. + + If this happens to you then you may try the following tricks: + + - Find msvcrt.dll in your C:\Windows directory. It may also be + in C:\Windows\System or C:\Windows\System32 + Copy it to the KVIrc installation folder overwriting the existing + msvcrt.dll shipped with kvirc. + + - Find msvcrt.dll somewhere on the net. An url hint might be: + http://www.dll-files.com/dllindex/dll-files.shtml?msvcrt + Download the file and copy it to the KVIrc installation folder + overwriting the existing msvcrt.dll shipped with kvirc. + + If none of the two steps work for you please write a mail to + pragma at kvirc dot net reporting your exact Windows version and build + and including the exact messages that the system reports when trying + to run the KVIrc executable. + + Thanx to Dusan Hokuv for reporting this and suggesting the fixes. + -- cgit v1.2.1