Clean automake files and unusued 'po' folder.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>
(cherry picked from commit 71ae23a29f60f1da7cfe659db0aa18ef71b4c4db)

16 files changed, 0 insertions, 790 deletions

diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index 425507e..0000000
--- a/Makefile.am
+++ /dev/null
@@ -1,24 +0,0 @@
-EXTRA_DIST = config.rpath m4/ChangeLog
-LIBTOOL_DEPS = @LIBTOOL_DEPS@
-instdir = @libdir@/pkgconfig
-ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = po src man
-SED_REPLACE = \
-	-e 's=\@prefix\@=@prefix@=' \
-	-e 's=\@libdir\@=@libdir@=' \
-	-e 's=\@VERSION\@=@VERSION@=' \
-	-e 's=\@exec_prefix\@=@exec_prefix@=' \
-	-e 's=\@includedir\@=@includedir@/libr='
-
-libtool: $(LIBTOOL_DEPS)
-	$(SHELL) ./config.status --recheck
-
-# Generate the pkg-config configuration file with all of
-# the accurate installation parameters
-libr.pc: libr.pc.in
-	cat libr.pc.in | sed $(SED_REPLACE) > libr.pc
-CLEANFILES=libr.pc
-
-# Install the pkg-config configuration file
-dist_inst_DATA = \
-	libr.pc
diff --git a/autogen.sh b/autogen.sh
deleted file mode 100755
index 3e16f15..0000000
--- a/autogen.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-
-autoreconf -iv
-autoconf
-automake
diff --git a/configure.ac b/configure.ac
deleted file mode 100644
index 2851b66..0000000
--- a/configure.ac
+++ /dev/null
@@ -1,82 +0,0 @@
-AC_INIT(libr.c)
-AM_INIT_AUTOMAKE(libr,0.6.0)
-AC_CONFIG_SRCDIR([src/libr.c])
-
-AC_PROG_CC
-AC_PROG_CC_STDC
-AC_HEADER_STDC
-AC_PROG_INSTALL
-AM_GNU_GETTEXT([external])
-AM_GNU_GETTEXT_VERSION(0.17)
-
-# It is important to build both a static and a shared version of the libr 
-# library.  The shared version is for future-proofing, whereas the static 
-# version should be used to make a more portable binary until libr is
-# more widely distributed (as in distributed at all).
-AC_ENABLE_SHARED
-AC_ENABLE_STATIC
-
-# Setup libtool
-AC_PROG_LIBTOOL
-AC_SUBST(LIBTOOL_DEPS)
-
-## Handle optional libraries (only header files are used)
-PKG_CHECK_MODULES(LIBGLADE, libglade-2.0 >= 2.0.0)
-
-## Handle required components
-# Is this the best check for zlib that can be made?
-AC_CHECK_HEADERS(zlib.h math.h pthread.h)
-EXTRA_LIBS="-lz -lm -lpthread"
-EXTRA_CFLAGS="-fvisibility=hidden"
-AC_SUBST(EXTRA_CFLAGS)
-AC_SUBST(EXTRA_LIBS)
-
-## Handle backend configuration
-LIBR_BACKEND="bfd"
-BACKEND_NAME="libbfd"
-AC_ARG_ENABLE(libelf, [  --enable-libelf         use the libelf backend ], [
-	if   test "$enableval" = "yes" ; then
-		LIBR_BACKEND="elf"
-		BACKEND_NAME="libelf"
-	fi
-])
-AC_ARG_ENABLE(libbfd, [  --enable-libbfd         use the libbfd backend (default) ], [
-	if test "$enableval" == "yes" ; then
-		LIBR_BACKEND="bfd"
-		BACKEND_NAME="libbfd"
-	fi
-])
-AC_ARG_ENABLE(ro, [  --enable-ro             use the read-only backend ], [
-	if test "$enableval" == "yes" ; then
-		LIBR_BACKEND="ro"
-		BACKEND_NAME="readonly"
-	fi
-])
-echo "Using ${BACKEND_NAME} backend."
-if test "${LIBR_BACKEND}" == "bfd" ; then
-	AC_CHECK_HEADER([bfd.h], [], [
-		AC_MSG_ERROR([Could not find libbfd header file (bfd.h)! This file is usually included in the package binutils-dev.])
-	])
-	BACKEND_PKG="binutils"
-	BACKEND_LIBS="-lbfd"
-	BACKEND_CFLAGS=""
-	AC_SUBST(BACKEND_LIBS)
-	AC_SUBST(BACKEND_CFLAGS)
-elif test "${LIBR_BACKEND}" == "elf" ; then
-	# Is libelf 0.8.2 safe enough? testing is currently on 0.8.6
-	BACKEND_PKG="elfutils"
-	pkg_modules="libelf >= 0.8.2"
-	PKG_CHECK_MODULES(BACKEND, [$pkg_modules])
-fi
-AC_SUBST(BACKEND_NAME)
-AC_SUBST(LIBR_BACKEND)
-AC_SUBST(BACKEND_PKG)
-
-
-AC_CONFIG_HEADERS(config.h)
-AC_OUTPUT(
-	src/Makefile
-	man/Makefile
-	po/Makefile.in
-	Makefile
-)
diff --git a/man/Makefile.am b/man/Makefile.am
deleted file mode 100644
index 2113960..0000000
--- a/man/Makefile.am
+++ /dev/null
@@ -1,5 +0,0 @@
-man3/*.3:
-	doxygen ../doc/libr.cfg
-
-man_MANS = man3/*.3
-CLEANFILES = man3/*.3
diff --git a/po/ChangeLog b/po/ChangeLog
deleted file mode 100644
index 9f6f67e..0000000
--- a/po/ChangeLog
+++ /dev/null
@@ -1,12 +0,0 @@
-2009-09-08  gettextize  <bug-gnu-gettext@gnu.org>
-
-	* Makefile.in.in: New file, from gettext-0.17.
-	* Rules-quot: New file, from gettext-0.17.
-	* boldquot.sed: New file, from gettext-0.17.
-	* en@boldquot.header: New file, from gettext-0.17.
-	* en@quot.header: New file, from gettext-0.17.
-	* insert-header.sin: New file, from gettext-0.17.
-	* quot.sed: New file, from gettext-0.17.
-	* remove-potcdate.sin: New file, from gettext-0.17.
-	* POTFILES.in: New file.
-
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
deleted file mode 100644
index fecf500..0000000
--- a/po/Makefile.in.in
+++ /dev/null
@@ -1,429 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.17
-GETTEXT_MACRO_VERSION = 0.17
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-localedir = @localedir@
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-
-# We use $(mkdir_p).
-# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
-# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
-# @install_sh@ does not start with $(SHELL), so we add it.
-# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
-# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
-# versions, $(mkinstalldirs) and $(install_sh) are unused.
-mkinstalldirs = $(SHELL) @install_sh@ -d
-install_sh = $(SHELL) @install_sh@
-MKDIR_P = @MKDIR_P@
-mkdir_p = @mkdir_p@
-
-GMSGFMT_ = @GMSGFMT@
-GMSGFMT_no = @GMSGFMT@
-GMSGFMT_yes = @GMSGFMT_015@
-GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
-MSGFMT_ = @MSGFMT@
-MSGFMT_no = @MSGFMT@
-MSGFMT_yes = @MSGFMT_015@
-MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
-XGETTEXT_ = @XGETTEXT@
-XGETTEXT_no = @XGETTEXT@
-XGETTEXT_yes = @XGETTEXT_015@
-XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
-
-.po.mo:
-	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
-	@lang=`echo $* | sed -e 's,.*/,,'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
-	sed -e '/^#/d' $< > t-$@
-	mv t-$@ $@
-
-
-all: check-macro-version all-@USE_NLS@
-
-all-yes: stamp-po
-all-no:
-
-# Ensure that the gettext macros and this Makefile.in.in are in sync.
-check-macro-version:
-	@test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
-	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
-	       exit 1; \
-	     }
-
-# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
-# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
-# we don't want to bother translators with empty POT files). We assume that
-# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
-# In this case, stamp-po is a nop (i.e. a phony target).
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
-	test ! -f $(srcdir)/$(DOMAIN).pot || \
-	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
-	  echo "touch stamp-po" && \
-	  echo timestamp > stamp-poT && \
-	  mv stamp-poT stamp-po; \
-	}
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
-	  package_gnu='GNU '; \
-	else \
-	  package_gnu=''; \
-	fi; \
-	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
-	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
-	else \
-	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
-	fi; \
-	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
-	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
-	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
-	      --files-from=$(srcdir)/POTFILES.in \
-	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	      --msgid-bugs-address="$$msgid_bugs_address" \
-	    ;; \
-	  *) \
-	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
-	      --files-from=$(srcdir)/POTFILES.in \
-	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	      --package-name="$${package_gnu}@PACKAGE@" \
-	      --package-version='@VERSION@' \
-	      --msgid-bugs-address="$$msgid_bugs_address" \
-	    ;; \
-	esac
-	test ! -f $(DOMAIN).po || { \
-	  if test -f $(srcdir)/$(DOMAIN).pot; then \
-	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
-	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
-	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
-	    else \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
-	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	    fi; \
-	  else \
-	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	  fi; \
-	}
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
-	$(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
-	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	if test -f "$(srcdir)/$${lang}.po"; then \
-	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	  cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
-	else \
-	  $(MAKE) $${lang}.po-create; \
-	fi
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    $(INSTALL_DATA) $(srcdir)/$$file \
-			    $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	  for file in Makevars; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkdir_p) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkdir_p) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
-	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
-	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
-	    fi; \
-	  done; \
-	done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
-	else \
-	  : ; \
-	fi
-installdirs-data-no:
-installdirs-data-yes:
-	$(mkdir_p) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkdir_p) $(DESTDIR)$$dir; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	    fi; \
-	  done; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  for file in $(DISTFILES.common) Makevars.template; do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-uninstall-data-no:
-uninstall-data-yes:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
-	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	  done; \
-	done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
-	rm -f remove-potcdate.sed
-	rm -f stamp-poT
-	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: stamp-po $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  dists="$$dists Makevars.template"; \
-	fi; \
-	if test -f $(srcdir)/$(DOMAIN).pot; then \
-	  dists="$$dists $(DOMAIN).pot stamp-po"; \
-	fi; \
-	if test -f $(srcdir)/ChangeLog; then \
-	  dists="$$dists ChangeLog"; \
-	fi; \
-	for i in 0 1 2 3 4 5 6 7 8 9; do \
-	  if test -f $(srcdir)/ChangeLog.$$i; then \
-	    dists="$$dists ChangeLog.$$i"; \
-	  fi; \
-	done; \
-	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
-	for file in $$dists; do \
-	  if test -f $$file; then \
-	    cp -p $$file $(distdir) || exit 1; \
-	  else \
-	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
-	  fi; \
-	done
-
-update-po: Makefile
-	$(MAKE) $(DOMAIN).pot-update
-	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
-	$(MAKE) update-gmo
-
-# General rule for creating PO files.
-
-.nop.po-create:
-	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
-	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
-	exit 1
-
-# General rule for updating PO files.
-
-.nop.po-update:
-	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
-	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
-	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "msgmerge for $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
-	cd $(top_builddir) \
-	  && $(SHELL) ./config.status $(subdir)/$@.in po-directories
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/po/Makevars b/po/Makevars
deleted file mode 100644
index 32692ab..0000000
--- a/po/Makevars
+++ /dev/null
@@ -1,41 +0,0 @@
-# Makefile variables for PO directory in any package using GNU gettext.
-
-# Usually the message domain is the same as the package name.
-DOMAIN = $(PACKAGE)
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ..
-
-# These options get passed to xgettext.
-XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
-
-# This is the copyright holder that gets inserted into the header of the
-# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
-# package.  (Note that the msgstr strings, extracted from the package's
-# sources, belong to the copyright holder of the package.)  Translators are
-# expected to transfer the copyright for their translations to this person
-# or entity, or to disclaim their copyright.  The empty string stands for
-# the public domain; in this case the translators are expected to disclaim
-# their copyright.
-COPYRIGHT_HOLDER = Free Software Foundation, Inc.
-
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-#   in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-#   understood.
-# - Strings which make invalid assumptions about notation of date, time or
-#   money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS =
-
-# This is the list of locale categories, beyond LC_MESSAGES, for which the
-# message catalogs shall be used.  It is usually empty.
-EXTRA_LOCALE_CATEGORIES =
diff --git a/po/POTFILES.in b/po/POTFILES.in
deleted file mode 100644
index 667e27c..0000000
--- a/po/POTFILES.in
+++ /dev/null
@@ -1 +0,0 @@
-# List of source files which contain translatable strings.
diff --git a/po/Rules-quot b/po/Rules-quot
deleted file mode 100644
index 9c2a995..0000000
--- a/po/Rules-quot
+++ /dev/null
@@ -1,47 +0,0 @@
-# Special Makefile rules for English message catalogs with quotation marks.
-
-DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
-
-.SUFFIXES: .insert-header .po-update-en
-
-en@quot.po-create:
-	$(MAKE) en@quot.po-update
-en@boldquot.po-create:
-	$(MAKE) en@boldquot.po-update
-
-en@quot.po-update: en@quot.po-update-en
-en@boldquot.po-update: en@boldquot.po-update-en
-
-.insert-header.po-update-en:
-	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
-	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	ll=`echo $$lang | sed -e 's/@.*//'`; \
-	LC_ALL=C; export LC_ALL; \
-	cd $(srcdir); \
-	if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "creation of $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-en@quot.insert-header: insert-header.sin
-	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
-
-en@boldquot.insert-header: insert-header.sin
-	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
-
-mostlyclean: mostlyclean-quot
-mostlyclean-quot:
-	rm -f *.insert-header
diff --git a/po/boldquot.sed b/po/boldquot.sed
deleted file mode 100644
index 4b937aa..0000000
--- a/po/boldquot.sed
+++ /dev/null
@@ -1,10 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
-s/“/“/g
-s/”/”/g
-s/‘/‘/g
-s/’/’/g
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
deleted file mode 100644
index fedb6a0..0000000
--- a/po/en@boldquot.header
+++ /dev/null
@@ -1,25 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
-# This catalog furthermore displays the text between the quotation marks in
-# bold face, assuming the VT100/XTerm escape sequences.
-#
diff --git a/po/en@quot.header b/po/en@quot.header
deleted file mode 100644
index a9647fc..0000000
--- a/po/en@quot.header
+++ /dev/null
@@ -1,22 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
diff --git a/po/insert-header.sin b/po/insert-header.sin
deleted file mode 100644
index b26de01..0000000
--- a/po/insert-header.sin
+++ /dev/null
@@ -1,23 +0,0 @@
-# Sed script that inserts the file called HEADER before the header entry.
-#
-# At each occurrence of a line starting with "msgid ", we execute the following
-# commands. At the first occurrence, insert the file. At the following
-# occurrences, do nothing. The distinction between the first and the following
-# occurrences is achieved by looking at the hold space.
-/^msgid /{
-x
-# Test if the hold space is empty.
-s/m/m/
-ta
-# Yes it was empty. First occurrence. Read the file.
-r HEADER
-# Output the file's contents by reading the next line. But don't lose the
-# current line while doing this.
-g
-N
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/po/quot.sed b/po/quot.sed
deleted file mode 100644
index 0122c46..0000000
--- a/po/quot.sed
+++ /dev/null
@@ -1,6 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
deleted file mode 100644
index 2436c49..0000000
--- a/po/remove-potcdate.sin
+++ /dev/null
@@ -1,19 +0,0 @@
-# Sed script that remove the POT-Creation-Date line in the header entry
-# from a POT file.
-#
-# The distinction between the first and the following occurrences of the
-# pattern is achieved by looking at the hold space.
-/^"POT-Creation-Date: .*"$/{
-x
-# Test if the hold space is empty.
-s/P/P/
-ta
-# Yes it was empty. First occurrence. Remove the line.
-g
-d
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/src/Makefile.am b/src/Makefile.am
deleted file mode 100644
index 5fbf00b..0000000
--- a/src/Makefile.am
+++ /dev/null
@@ -1,39 +0,0 @@
-libr_la_includedir = $(includedir)/libr
-LIBTOOL_DEPS = @LIBTOOL_DEPS@
-
-INCLUDES = \
-	-D__LIBR_BACKEND_@BACKEND_NAME@__ \
-	-D__LIBR_BUILD__ \
-	@LIBGLADE_CFLAGS@ \
-	@BACKEND_CFLAGS@ \
-	@EXTRA_CFLAGS@
-
-lib_LTLIBRARIES = \
-	libr.la
-
-libr_la_SOURCES = \
-	libr-@LIBR_BACKEND@.c \
-	tempfiles.c \
-	onecanvas.c \
-	libr-icons.c \
-	libr-i18n.c \
-	libr-gtk.c \
-	libr.c
-
-libr_la_include_HEADERS = \
-	gettext.h \
-	libr-icons.h \
-	libr-i18n.h \
-	libr-gtk.h \
-	libr.h
-
-libr_la_LIBADD = \
-	@BACKEND_LIBS@ \
-	@EXTRA_LIBS@
-
-# If not in a fakeroot environment then run ldconfig
-install: install-am
-	@if [ ! -n "${FAKEROOTKEY}" ]; then \
-		echo "Regenerating system dependencies..."; \
-		ldconfig; \
-	fi