Remove additional unneeded tq method conversions

3 files changed, 43 insertions, 43 deletions

diff --git a/src/devices/pic/prog/pic_debug.cpp b/src/devices/pic/prog/pic_debug.cpp
index 7dda5c2..eef84cc 100644
--- a/src/devices/pic/prog/pic_debug.cpp
+++ b/src/devices/pic/prog/pic_debug.cpp
@@ -86,9 +86,9 @@ TQString Debugger::P16FSpecific::statusString() const
   uint bank = (status.bit(5) ? 1 : 0) + (status.bit(6) ? 2 : 0);
   BitValue wreg = Register::list().value(wregTypeData());
   return TQString("W:%1   %2 %3 %4   PC:%5   Bank:%6")
-         .tqarg(toHexLabel(wreg, rdata.nbChars())).tqarg(status.bit(2) ? "Z" : "z")
-         .tqarg(status.bit(1) ? "DC" : "dc").tqarg(status.bit(0) ? "C" : "c")
-         .tqarg(toHexLabel(_base.pc(), device().nbCharsAddress())).tqarg(bank);
+         .arg(toHexLabel(wreg, rdata.nbChars())).arg(status.bit(2) ? "Z" : "z")
+         .arg(status.bit(1) ? "DC" : "dc").arg(status.bit(0) ? "C" : "c")
+         .arg(toHexLabel(_base.pc(), device().nbCharsAddress())).arg(bank);
 }
 
 //----------------------------------------------------------------------------
@@ -111,8 +111,8 @@ TQString Debugger::P18FSpecific::statusString() const
   BitValue bsr = Register::list().value(base().registerTypeData("BSR"));
   BitValue wreg = Register::list().value(wregTypeData());
   return TQString("W:%1   %2 %3 %4 %5 %6  PC:%7   Bank:%8")
-         .tqarg(toHexLabel(wreg, rdata.nbChars())).tqarg(status.bit(4) ? "N" : "n")
-         .tqarg(status.bit(3) ? "OV" : "ov").tqarg(status.bit(2) ? "Z" : "z")
-         .tqarg(status.bit(1) ? "DC" : "dc").tqarg(status.bit(0) ? "C" : "c")
-         .tqarg(toHexLabel(base().pc(), device().nbCharsAddress())).tqarg(toLabel(bsr));
+         .arg(toHexLabel(wreg, rdata.nbChars())).arg(status.bit(4) ? "N" : "n")
+         .arg(status.bit(3) ? "OV" : "ov").arg(status.bit(2) ? "Z" : "z")
+         .arg(status.bit(1) ? "DC" : "dc").arg(status.bit(0) ? "C" : "c")
+         .arg(toHexLabel(base().pc(), device().nbCharsAddress())).arg(toLabel(bsr));
 }
diff --git a/src/devices/pic/prog/pic_prog.cpp b/src/devices/pic/prog/pic_prog.cpp
index f0c917d..b134303 100644
--- a/src/devices/pic/prog/pic_prog.cpp
+++ b/src/devices/pic/prog/pic_prog.cpp
@@ -106,9 +106,9 @@ bool Programmer::PicBase::readVoltages()
     if ( !group().canReadVoltage(Pic::VoltageType(i)) ) continue;
     if ( _voltages[i].error==true ) {
       ok = false;
-      log(Log::LineType::Error, i18n("  %1 = %2 V: error in voltage level.").tqarg(i18n(Pic::VOLTAGE_TYPE_LABELS[i])).tqarg(_voltages[i].value));
+      log(Log::LineType::Error, i18n("  %1 = %2 V: error in voltage level.").arg(i18n(Pic::VOLTAGE_TYPE_LABELS[i])).arg(_voltages[i].value));
     } else if ( _voltages[i].value!=UNKNOWN_VOLTAGE )
-      log(Log::DebugLevel::Normal, TQString("  %1 = %2 V").tqarg(i18n(Pic::VOLTAGE_TYPE_LABELS[i])).tqarg(_voltages[i].value));
+      log(Log::DebugLevel::Normal, TQString("  %1 = %2 V").arg(i18n(Pic::VOLTAGE_TYPE_LABELS[i])).arg(_voltages[i].value));
   }
   return ok;
 }
@@ -136,10 +136,10 @@ bool Programmer::PicBase::initProgramming(Task)
     const Pic::VoltageData &tvpp = device()->voltage(Pic::Vpp);
     if ( vpp()<tvpp.min )
       log(Log::LineType::Warning, i18n("Vpp (%1 V) is lower than the minimum required voltage (%2 V).")
-                        .tqarg(vpp()).tqarg(tvpp.min));
+                        .arg(vpp()).arg(tvpp.min));
     if ( vpp()>tvpp.max ) {
       TQString s = i18n("Vpp (%1 V) is higher than the maximum voltage (%2 V). You may damage the device.")
-                  .tqarg(vpp()).tqarg(tvpp.max);
+                  .arg(vpp()).arg(tvpp.max);
       log(Log::LineType::Warning, s);
       if ( !askContinue(s) ) {
         logUserAbort();
@@ -153,15 +153,15 @@ bool Programmer::PicBase::initProgramming(Task)
     if ( vdd()<tvdd.min ) {
       if ( type==Pic::VddBulkErase && device()->voltage(Pic::VddWrite).min!=tvdd.min )
         log(Log::LineType::Warning, i18n("Vdd (%1 V) is too low for high-voltage programming\n(piklab only supports high-voltage programming at the moment).\nMinimum required is %2 V.")
-                          .tqarg(vdd()).tqarg(tvdd.min));
+                          .arg(vdd()).arg(tvdd.min));
       else if ( type==Pic::VddRead && device()->voltage(Pic::VddWrite).min!=tvdd.min )
         log(Log::LineType::Warning, i18n("Vdd (%1 V) is too low for reading\nMinimum required is %2 V.")
-                          .tqarg(vdd()).tqarg(tvdd.min));
+                          .arg(vdd()).arg(tvdd.min));
       else log(Log::LineType::Warning, i18n("Vdd (%1 V) is too low for programming\nMinimum required is %2 V.")
-                            .tqarg(vdd()).tqarg(tvdd.min));
+                            .arg(vdd()).arg(tvdd.min));
     } else if ( vdd()>tvdd.max ) {
       TQString s = i18n("Vdd (%1 V) is higher than the maximum voltage (%2 V). You may damage the device.")
-                  .tqarg(vdd()).tqarg(tvdd.max);
+                  .arg(vdd()).arg(tvdd.max);
       log(Log::LineType::Warning, s);
       if ( !askContinue(s) ) {
         logUserAbort();
@@ -178,7 +178,7 @@ bool Programmer::PicBase::initProgramming(Task)
     _hasProtectedCode = _deviceMemory->isProtected(Pic::Protection::ProgramProtected, Pic::MemoryRangeType::Code);
     _hasProtectedEeprom = _deviceMemory->isProtected(Pic::Protection::ProgramProtected, Pic::MemoryRangeType::Eeprom);
     log(Log::DebugLevel::Normal, TQString("  protected: code=%1 data=%2")
-                          .tqarg(_hasProtectedCode ? "true" : "false").tqarg(_hasProtectedEeprom ? "true" : "false"));
+                          .arg(_hasProtectedCode ? "true" : "false").arg(_hasProtectedEeprom ? "true" : "false"));
     // read calibration
     if ( !readCalibration() ) return false;
   }
@@ -250,14 +250,14 @@ bool Programmer::PicBase::verifyDeviceId()
 {
   if ( !specific()->canReadRange(Pic::MemoryRangeType::DeviceId ) ) return true;
   if ( !device()->isReadable(Pic::MemoryRangeType::DeviceId) ) {
-    log(Log::LineType::Information, i18n("Device not autodetectable: continuing with the specified device name \"%1\"...").tqarg(device()->name()));
+    log(Log::LineType::Information, i18n("Device not autodetectable: continuing with the specified device name \"%1\"...").arg(device()->name()));
     return true;
   }
   BitValue rawId = readDeviceId();
   if ( hasError() ) return false;
   uint nbChars = device()->nbWords(Pic::MemoryRangeType::DeviceId) * device()->nbCharsWord(Pic::MemoryRangeType::DeviceId);
   if ( rawId==0x0 || rawId==device()->mask(Pic::MemoryRangeType::DeviceId) ) {
-    log(Log::LineType::Error, i18n("Missing or incorrect device (Read id is %1).").tqarg(toHexLabel(rawId, nbChars)));
+    log(Log::LineType::Error, i18n("Missing or incorrect device (Read id is %1).").arg(toHexLabel(rawId, nbChars)));
     return false;
   }
   TQMap<TQString, Device::IdData> ids;
@@ -270,18 +270,18 @@ bool Programmer::PicBase::verifyDeviceId()
     }
   TQString message;
   if ( ids.count()!=0 ) {
-    log(Log::LineType::Information, i18n("Read id: %1").tqarg(device()->idNames(ids).join("; ")));
+    log(Log::LineType::Information, i18n("Read id: %1").arg(device()->idNames(ids).join("; ")));
     if ( ids.contains(device()->name()) ) return true;
-    message = i18n("Read id does not match the specified device name \"%1\".").tqarg(device()->name());
+    message = i18n("Read id does not match the specified device name \"%1\".").arg(device()->name());
   } else {
-    log(Log::LineType::Warning, i18n("  Unknown or incorrect device (Read id is %1).").tqarg(toHexLabel(rawId, nbChars)));
+    log(Log::LineType::Warning, i18n("  Unknown or incorrect device (Read id is %1).").arg(toHexLabel(rawId, nbChars)));
     message = i18n("Unknown device.");
   }
   if ( !askContinue(message) ) {
     logUserAbort();
     return false;
   }
-  log(Log::LineType::Information, i18n("Continue with the specified device name: \"%1\"...").tqarg(device()->name()));
+  log(Log::LineType::Information, i18n("Continue with the specified device name: \"%1\"...").arg(device()->name()));
   return true;
 }
 
@@ -306,7 +306,7 @@ bool Programmer::PicBase::readCalibration()
     Device::Array data;
     if ( !specific()->read(Pic::MemoryRangeType::Cal, data, 0) ) return false;
     _deviceMemory->setArray(Pic::MemoryRangeType::Cal, data);
-    log(Log::DebugLevel::Normal, TQString("  Read osccal: %1").tqarg(prettyCalibration(data)));
+    log(Log::DebugLevel::Normal, TQString("  Read osccal: %1").arg(prettyCalibration(data)));
     TQString message;
     if ( !device()->checkCalibration(data, &message) ) log(Log::LineType::Warning, "  " + message);
     if ( device()->isReadable(Pic::MemoryRangeType::CalBackup) ) {
@@ -316,7 +316,7 @@ bool Programmer::PicBase::readCalibration()
       }
       if ( !specific()->read(Pic::MemoryRangeType::CalBackup, data, 0) ) return false;
       _deviceMemory->setArray(Pic::MemoryRangeType::CalBackup, data);
-      log(Log::DebugLevel::Normal, TQString("  Read osccal backup: %1").tqarg(prettyCalibration(data)));
+      log(Log::DebugLevel::Normal, TQString("  Read osccal backup: %1").arg(prettyCalibration(data)));
       if ( !device()->checkCalibration(data, &message) ) log(Log::LineType::Warning, "  " + message);
     }
   }
@@ -381,7 +381,7 @@ bool Programmer::PicBase::restoreBandGapBits()
     log(Log::LineType::Warning, i18n("Could not restore band gap bits because programmer does not support writing config bits."));
     return true;
   }
-  log(Log::DebugLevel::Normal, TQString("  Write config with band gap bits: %2").tqarg(toHexLabel(cdata[0], device()->nbCharsWord(Pic::MemoryRangeType::Config))));
+  log(Log::DebugLevel::Normal, TQString("  Write config with band gap bits: %2").arg(toHexLabel(cdata[0], device()->nbCharsWord(Pic::MemoryRangeType::Config))));
   if ( !programRange(Pic::MemoryRangeType::Config, cdata) ) return false;
   if ( !specific()->read(Pic::MemoryRangeType::Config, data, 0) ) return false;
   if ( data==cdata ) log(Log::LineType::Information, i18n("  Band gap bits have been preserved."));
@@ -464,7 +464,7 @@ bool Programmer::PicBase::internalEraseRange(Pic::MemoryRangeType type)
     log(Log::LineType::SoftError, i18n("Cannot erase specified range because of programmer limitations."));
     return false;
   }
-  if ( !askContinue(i18n("%1: Erasing this range only is not supported with this programmer. This will erase the whole chip and restore the other memory ranges.").tqarg(type.label())) ) {
+  if ( !askContinue(i18n("%1: Erasing this range only is not supported with this programmer. This will erase the whole chip and restore the other memory ranges.").arg(type.label())) ) {
     logUserAbort();
     return false;
   }
@@ -497,19 +497,19 @@ bool Programmer::PicBase::readRange(Pic::MemoryRangeType type, Pic::Memory *memo
 {
   if ( !device()->isReadable(type) ) return true;
   if ( !specific()->canReadRange(type) ) {
-    log(Log::LineType::Information, i18n("The selected programmer cannot read %1: operation skipped.").tqarg(type.label()));
+    log(Log::LineType::Information, i18n("The selected programmer cannot read %1: operation skipped.").arg(type.label()));
     return true;
   }
   VerifyData *vdata = (vd ? new VerifyData(vd->actions, vd->memory) : 0);
   if (vdata) {
-    log(Log::LineType::Information, i18n("  Verify memory: %1").tqarg(type.label()));
+    log(Log::LineType::Information, i18n("  Verify memory: %1").arg(type.label()));
     if ( !(vdata->actions & IgnoreProtectedVerify) ) {
       vdata->protectedRanges = static_cast<const Pic::Memory &>(vdata->memory).protectedRanges(Pic::Protection::ProgramProtected, type);
       if ( !vdata->protectedRanges.isEmpty() ) log(Log::LineType::Warning, i18n("  Part of device memory is protected (in %1) and cannot be verified.")
-                                               .tqarg(type.label()));
+                                               .arg(type.label()));
     } else vdata->protectedRanges.clear();
   } else {
-    log(Log::LineType::Information, i18n("  Read memory: %1").tqarg(type.label()));
+    log(Log::LineType::Information, i18n("  Read memory: %1").arg(type.label()));
     CRASH_ASSERT(memory);
   }
   Device::Array data;
@@ -562,7 +562,7 @@ bool Programmer::PicBase::programSingle(Pic::MemoryRangeType type, const Pic::Me
 
 bool Programmer::PicBase::programRange(Pic::MemoryRangeType mtype, const Device::Array &data)
 {
-  log(Log::LineType::Information, i18n("  Write memory: %1").tqarg(mtype.label()));
+  log(Log::LineType::Information, i18n("  Write memory: %1").arg(mtype.label()));
   bool only = ( readConfigEntry(Config::OnlyProgramNonMask).toBool()
                 && (mtype==Pic::MemoryRangeType::Code || mtype==Pic::MemoryRangeType::Eeprom) );
   return specific()->write(mtype, data, !only);
@@ -672,15 +672,15 @@ bool Programmer::PicBase::checkProgramCalibration(const Device::Array &data)
 {
   TQString message, s = prettyCalibration(data);
   if ( !device()->checkCalibration(data, &message) ) {
-    sorry(i18n("The calibration word %1 is not valid.").tqarg(s), message);
+    sorry(i18n("The calibration word %1 is not valid.").arg(s), message);
     return false;
   }
-  return askContinue(i18n("Do you want to overwrite the device calibration with %1?").tqarg(s));
+  return askContinue(i18n("Do you want to overwrite the device calibration with %1?").arg(s));
 }
 
 bool Programmer::PicBase::tryProgramCalibration(const Device::Array &data, bool &success)
 {
-  log(Log::LineType::Information, i18n("  Write memory: %1").tqarg(Pic::MemoryRangeType(Pic::MemoryRangeType::Cal).label()));
+  log(Log::LineType::Information, i18n("  Write memory: %1").arg(Pic::MemoryRangeType(Pic::MemoryRangeType::Cal).label()));
   success = true;
   if ( !specific()->write(Pic::MemoryRangeType::Cal, data, true) ) return false;
   Device::Array read;
@@ -691,7 +691,7 @@ bool Programmer::PicBase::tryProgramCalibration(const Device::Array &data, bool
   if ( device()->isWritable(Pic::MemoryRangeType::CalBackup) ) {
     if ( !specific()->read(Pic::MemoryRangeType::CalBackup, read, 0) ) return false;
     if ( device()->checkCalibration(read) ) return true; // do not overwrite correct backup value
-    log(Log::LineType::Information, i18n("  Write memory: %1").tqarg(Pic::MemoryRangeType(Pic::MemoryRangeType::CalBackup).label()));
+    log(Log::LineType::Information, i18n("  Write memory: %1").arg(Pic::MemoryRangeType(Pic::MemoryRangeType::CalBackup).label()));
     if ( !specific()->write(Pic::MemoryRangeType::CalBackup, data, true) ) return false;
     if ( !specific()->read(Pic::MemoryRangeType::CalBackup, read, 0) ) return false;
     for (uint i=0; i<data.count(); i++)
diff --git a/src/devices/pic/prog/pic_prog_specific.cpp b/src/devices/pic/prog/pic_prog_specific.cpp
index c8d958b..b37febb 100644
--- a/src/devices/pic/prog/pic_prog_specific.cpp
+++ b/src/devices/pic/prog/pic_prog_specific.cpp
@@ -29,10 +29,10 @@ uint Programmer::PicDeviceSpecific::findNonMaskStart(Pic::MemoryRangeType type,
   uint start = 0;
   for (; start<data.count(); start++)
     if ( data[start]!=device().mask(type) ) break;
-  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("start before align: %1").tqarg(start));
+  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("start before align: %1").arg(start));
   uint align = device().nbWordsWriteAlignment(type);
   start -= start % align;
-  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("start after align: %1 (align=%2)").tqarg(start).tqarg(align));
+  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("start after align: %1 (align=%2)").arg(start).arg(align));
   return start;
 }
 
@@ -41,10 +41,10 @@ uint Programmer::PicDeviceSpecific::findNonMaskEnd(Pic::MemoryRangeType type, co
   uint end = data.count()-1;
   for (; end>0; end--)
     if ( data[end]!=device().mask(type) ) break;
-  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("end before align: %1").tqarg(end));
+  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("end before align: %1").arg(end));
   uint align = device().nbWordsWriteAlignment(type);
   if ( (end+1) % align ) end += align - (end+1) % align;
-  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("end after align: %1 (align=%2)").tqarg(end).tqarg(align));
+  const_cast<PicDeviceSpecific *>(this)->log(Log::DebugLevel::Normal, TQString("end after align: %1 (align=%2)").arg(end).arg(align));
   Q_ASSERT(end<data.count());
   return end;
 }
@@ -99,11 +99,11 @@ bool Programmer::PicHardware::compareWords(Pic::MemoryRangeType type, uint index
   Address address = device().range(type).start + inc * index;
   if ( actions & ::Programmer::BlankCheckVerify )
     log(Log::LineType::SoftError, i18n("Device memory is not blank (in %1 at address %2: reading %3 and expecting %4).")
-      .tqarg(type.label()).tqarg(toHexLabel(address, device().nbCharsAddress()))
-      .tqarg(toHexLabel(d, device().nbCharsWord(type))).tqarg(toHexLabel(v, device().nbCharsWord(type))));
+      .arg(type.label()).arg(toHexLabel(address, device().nbCharsAddress()))
+      .arg(toHexLabel(d, device().nbCharsWord(type))).arg(toHexLabel(v, device().nbCharsWord(type))));
   else log(Log::LineType::SoftError, i18n("Device memory does not match hex file (in %1 at address %2: reading %3 and expecting %4).")
-      .tqarg(type.label()).tqarg(toHexLabel(address, device().nbCharsAddress()))
-      .tqarg(toHexLabel(d, device().nbCharsWord(type))).tqarg(toHexLabel(v, device().nbCharsWord(type))));
+      .arg(type.label()).arg(toHexLabel(address, device().nbCharsAddress()))
+      .arg(toHexLabel(d, device().nbCharsWord(type))).arg(toHexLabel(v, device().nbCharsWord(type))));
   return false;
 }