Add Qt3 development HEAD version

2 files changed, 189 insertions, 0 deletions

diff --git a/mkspecs/solaris-cc-64/qmake.conf b/mkspecs/solaris-cc-64/qmake.conf
new file mode 100644
index 0000000..5064778
--- /dev/null
+++ b/mkspecs/solaris-cc-64/qmake.conf
@@ -0,0 +1,102 @@
+#
+#
+# qmake configuration for solaris-cc-64
+#
+# Written for Sun WorkShop 5.0, Forte Developer 6, and Sun ONE Studio 7.
+#
+# From the standards(5) manual page:
+# 	The XNS4 specification is safe for use only in ILP32 (32-bit)
+# 	environments and should not be used for LP64 (64-bit)
+# 	application environments. Use XNS5, which has LP64-clean
+# 	interfaces that are portable across ILP32 and LP64 environments.
+# 	[...]
+# 	For platforms supporting the LP64 (64-bit) programming environment
+# 	where the SC5.0 Compilers have been installed, SUSv2-conforming LP64
+# 	applications using XNS5 library calls should be built with command
+# 	lines of the form:
+# 		c89 $(getconf XBS5_LP64_OFF64_CFLAGS) -D_XOPEN_SOURCE=500 \
+# 		    $(getconf XBS5_LP64_OFF64_LDFLAGS) foo.c -o foo \
+# 		    $(getconf XBS5_LP64_OFF64_LIBS) -lxnet
+# So it appears that _XOPEN_SOURCE=500 should be defined when building
+# 64-bit applications (on Solaris 7 and better). But then __EXTENSIONS__
+# should be defined as well to recover all the default system interface.
+#
+
+MAKEFILE_GENERATOR	= UNIX
+TEMPLATE		= app
+CONFIG			+= qt warn_on release link_prl
+
+QMAKE_CC		= cc
+QMAKE_LEX		= flex
+QMAKE_LEXFLAGS		=
+QMAKE_YACC		= yacc
+QMAKE_YACCFLAGS		= -d
+QMAKE_CFLAGS		= -xarch=generic64 -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
+QMAKE_CFLAGS_DEPS	= -xM
+QMAKE_CFLAGS_WARN_ON	=
+QMAKE_CFLAGS_WARN_OFF	= -w
+QMAKE_CFLAGS_RELEASE	= -O
+QMAKE_CFLAGS_DEBUG	= -g
+QMAKE_CFLAGS_SHLIB	= -KPIC
+QMAKE_CFLAGS_YACC	=
+QMAKE_CFLAGS_THREAD	= -mt
+
+QMAKE_CXX		= CC
+QMAKE_CXXFLAGS		= $$QMAKE_CFLAGS
+QMAKE_CXXFLAGS_DEPS	= $$QMAKE_CFLAGS_DEPS
+QMAKE_CXXFLAGS_WARN_ON	= $$QMAKE_CFLAGS_WARN_ON
+QMAKE_CXXFLAGS_WARN_OFF	= $$QMAKE_CFLAGS_WARN_OFF
+QMAKE_CXXFLAGS_RELEASE	= -O2
+QMAKE_CXXFLAGS_DEBUG	= $$QMAKE_CFLAGS_DEBUG
+QMAKE_CXXFLAGS_SHLIB	= $$QMAKE_CFLAGS_SHLIB
+QMAKE_CXXFLAGS_YACC	= $$QMAKE_CFLAGS_YACC
+QMAKE_CXXFLAGS_THREAD	= $$QMAKE_CFLAGS_THREAD
+
+QMAKE_INCDIR		=
+QMAKE_LIBDIR		=
+QMAKE_INCDIR_X11	= /usr/openwin/include
+QMAKE_LIBDIR_X11	= /usr/openwin/lib
+QMAKE_INCDIR_QT		= $(QTDIR)/include
+QMAKE_LIBDIR_QT		= $(QTDIR)/lib
+QMAKE_INCDIR_OPENGL	= /usr/openwin/include
+QMAKE_LIBDIR_OPENGL	= /usr/openwin/lib
+
+QMAKE_LINK		= CC
+QMAKE_LINK_SHLIB	= CC
+QMAKE_LFLAGS		= -xarch=generic64
+QMAKE_LFLAGS_RELEASE	=
+QMAKE_LFLAGS_DEBUG	=
+QMAKE_LFLAGS_SHLIB	= -G
+QMAKE_LFLAGS_PLUGIN	= $$QMAKE_LFLAGS_SHLIB
+QMAKE_LFLAGS_SONAME	= -h$$LITERAL_WHITESPACE
+QMAKE_LFLAGS_THREAD	= -mt
+QMAKE_RPATH		= -R
+
+QMAKE_LIBS		=
+QMAKE_LIBS_DYNLOAD	= -ldl
+QMAKE_LIBS_X11		= -lXext -lX11 -lresolv -lsocket -lnsl
+QMAKE_LIBS_X11SM	= -lSM -lICE
+QMAKE_LIBS_NIS		=
+QMAKE_LIBS_QT		= -lqt
+QMAKE_LIBS_QT_THREAD	= -lqt-mt
+QMAKE_LIBS_OPENGL	= -lGLU -lGL -lXmu
+QMAKE_LIBS_OPENGL_QT	= -lGL -lXmu
+QMAKE_LIBS_THREAD	= -lpthread -lrt
+
+QMAKE_MOC		= $(QTDIR)/bin/moc
+QMAKE_UIC		= $(QTDIR)/bin/uic
+
+QMAKE_AR		= CC -xar -o
+QMAKE_RANLIB		=
+
+QMAKE_CLEAN		= -r $(OBJECTS_DIR)Templates.DB $(OBJECTS_DIR)SunWS_cache
+
+QMAKE_TAR		= tar -cf
+QMAKE_GZIP		= gzip -9f
+
+QMAKE_COPY		= cp -f
+QMAKE_MOVE		= mv -f
+QMAKE_DEL_FILE		= rm -f
+QMAKE_DEL_DIR		= rmdir
+QMAKE_CHK_DIR_EXISTS	= test -d
+QMAKE_MKDIR		= mkdir -p
diff --git a/mkspecs/solaris-cc-64/qplatformdefs.h b/mkspecs/solaris-cc-64/qplatformdefs.h
new file mode 100644
index 0000000..30bc56d
--- /dev/null
+++ b/mkspecs/solaris-cc-64/qplatformdefs.h
@@ -0,0 +1,87 @@
+#ifndef QPLATFORMDEFS_H
+#define QPLATFORMDEFS_H
+
+// Get Qt defines/settings
+
+#include "qglobal.h"
+
+// Set any POSIX/XOPEN defines at the top of this file to turn on specific APIs
+
+#include <unistd.h>
+
+
+// We are hot - unistd.h should have turned on the specific APIs we requested
+
+
+#ifdef QT_THREAD_SUPPORT
+#include <pthread.h>
+#endif
+
+#include <dirent.h>
+#include <fcntl.h>
+#include <grp.h>
+#include <pwd.h>
+#include <signal.h>
+#include <dlfcn.h>
+
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#include <sys/filio.h>
+#include <sys/ipc.h>
+#include <sys/time.h>
+#include <sys/shm.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+// DNS header files are not fully covered by X/Open specifications.
+// In particular nothing is said about res_* :/
+// On Solaris header files <netinet/in.h> and <arpa/nameser.h> are not
+// included by <resolv.h>. Note that <arpa/nameser.h> must be included
+// before <resolv.h>.
+#include <netinet/in.h>
+#include <arpa/nameser.h>
+#include <resolv.h>
+
+
+#if !defined(QT_NO_COMPAT)
+#define QT_STATBUF		struct stat
+#define QT_STATBUF4TSTAT	struct stat
+#define QT_STAT			::stat
+#define QT_FSTAT		::fstat
+#define QT_STAT_REG		S_IFREG
+#define QT_STAT_DIR		S_IFDIR
+#define QT_STAT_MASK		S_IFMT
+#define QT_STAT_LNK		S_IFLNK
+#define QT_FILENO		fileno
+#define QT_OPEN			::open
+#define QT_CLOSE		::close
+#define QT_LSEEK		::lseek
+#define QT_READ			::read
+#define QT_WRITE		::write
+#define QT_ACCESS		::access
+#define QT_GETCWD		::getcwd
+#define QT_CHDIR		::chdir
+#define QT_MKDIR		::mkdir
+#define QT_RMDIR		::rmdir
+#define QT_OPEN_RDONLY		O_RDONLY
+#define QT_OPEN_WRONLY		O_WRONLY
+#define QT_OPEN_RDWR		O_RDWR
+#define QT_OPEN_CREAT		O_CREAT
+#define QT_OPEN_TRUNC		O_TRUNC
+#define QT_OPEN_APPEND		O_APPEND
+#endif
+
+#define QT_SIGNAL_RETTYPE	void
+#define QT_SIGNAL_ARGS		int
+#define QT_SIGNAL_IGNORE	SIG_IGN
+
+// On 64-bit platforms (Solaris 7 and better) sockets use socklen_t.
+#define QT_SOCKLEN_T		socklen_t
+
+// Supported on 64-bit platforms (Solaris 7 and better).
+#define QT_SNPRINTF		::snprintf
+#define QT_VSNPRINTF		::vsnprintf
+
+
+#endif // QPLATFORMDEFS_H