Second part of prior commit

1 files changed, 0 insertions, 1724 deletions

diff --git a/tde-i18n-bs/messages/kdebase/ksysguard.po b/tde-i18n-bs/messages/kdebase/ksysguard.po
deleted file mode 100644
index 2a5dddc3bee..00000000000
--- a/tde-i18n-bs/messages/kdebase/ksysguard.po
+++ /dev/null
@@ -1,1724 +0,0 @@
-# translation of ksysguard.po to Bosanski
-# translation of ksysguard.po to Bosnian
-# KTranslator Generated File
-# Copyright (C) 1998,2004, 2005, 2006 Free Software Foundation, Inc.
-# Vedran Ljubovic <vljubovic@smartnet.ba>, 2002,2004, 2005, 2006.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: ksysguard\n"
-"POT-Creation-Date: 2008-07-08 01:18+0200\n"
-"PO-Revision-Date: 2006-02-11 20:01+0100\n"
-"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
-"Language-Team: Bosnian <lokal@linux.org.ba>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.10.2\n"
-
-#: KSysGuardApplet.cc:318 WorkSheet.cc:94
-#, c-format
-msgid "Cannot open the file %1."
-msgstr "Ne mogu otvoriti datoteku %1."
-
-#: KSysGuardApplet.cc:327 WorkSheet.cc:102
-msgid "The file %1 does not contain valid XML."
-msgstr "Datoteka %1 ne sadrži ispravan XML"
-
-#: WorkSheet.cc:109
-msgid ""
-"The file %1 does not contain a valid worksheet definition, which must have a "
-"document type 'KSysGuardWorkSheet'."
-msgstr ""
-"Datoteka %1 ne sadrži ispravan opis radnog lista, jer on mora biti dokument "
-"tipa 'KSysGuardWorkSheet'."
-
-#: WorkSheet.cc:125
-msgid "The file %1 has an invalid worksheet size."
-msgstr "Datoteka %1 ima neispravnu veličinu radnog lista."
-
-#: KSysGuardApplet.cc:476 WorkSheet.cc:225
-#, c-format
-msgid "Cannot save file %1"
-msgstr "Ne mogu snimiti datoteku %1"
-
-#: WorkSheet.cc:273
-msgid "The clipboard does not contain a valid display description."
-msgstr "Clipboard ne sadrži ispravan opis pokazivača."
-
-#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
-msgid "It is impossible to connect to '%1'."
-msgstr "Nije moguće spojiti se na '%1'."
-
-#: KSysGuardApplet.cc:209 WorkSheet.cc:331
-msgid "Select Display Type"
-msgstr "Odaberite vrstu pokazivača"
-
-#: KSysGuardApplet.cc:210 WorkSheet.cc:332
-msgid "&Signal Plotter"
-msgstr "&Ploter signala"
-
-#: KSysGuardApplet.cc:211 WorkSheet.cc:333
-msgid "&Multimeter"
-msgstr "&Multimetar"
-
-#: WorkSheet.cc:334
-msgid "&BarGraph"
-msgstr "&BarGraph"
-
-#: WorkSheet.cc:335
-msgid "S&ensorLogger"
-msgstr "Dnevnik s&enzora"
-
-#: ksgrd/SensorAgent.cc:88
-msgid ""
-"Message from %1:\n"
-"%2"
-msgstr ""
-"Poruka od %1:\n"
-"%2"
-
-#: ksgrd/TimerSettings.cc:36
-msgid "Timer Settings"
-msgstr "Postavke timera"
-
-#: ksgrd/TimerSettings.cc:43
-msgid "Use update interval of worksheet"
-msgstr "Koristi interval osvježavanja radnog lista"
-
-#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
-msgid "Update interval:"
-msgstr "Vrijeme osvježavanja:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
-#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
-#: rc.cpp:21
-#, no-c-format
-msgid " sec"
-msgstr " sek"
-
-#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
-msgid "All displays of the sheet are updated at the rate specified here."
-msgstr "Svi pokazivači na listu se obnavljaju u navedenom vremenu."
-
-#: ksgrd/HostConnector.cc:37
-msgid "Connect Host"
-msgstr "Spoji računar"
-
-#: ksgrd/HostConnector.cc:44
-msgid "Host:"
-msgstr "Računar:"
-
-#: ksgrd/HostConnector.cc:54
-msgid "Enter the name of the host you want to connect to."
-msgstr "Unesite ime računara na koji se želite spojiti."
-
-#: ksgrd/HostConnector.cc:61
-msgid "Connection Type"
-msgstr "Vrsta konekcije"
-
-#: ksgrd/HostConnector.cc:66
-msgid "ssh"
-msgstr "ssh"
-
-#: ksgrd/HostConnector.cc:69
-msgid "Select this to use the secure shell to login to the remote host."
-msgstr ""
-"Izaberite ovu opciju ako želite koristiti secure shell za prijavu na udaljeni "
-"računar."
-
-#: ksgrd/HostConnector.cc:72
-msgid "rsh"
-msgstr "rsh"
-
-#: ksgrd/HostConnector.cc:73
-msgid "Select this to use the remote shell to login to the remote host."
-msgstr ""
-"Izaberite ovu opciju ako želite koristiti remote shell za prijavu na udaljeni "
-"računar."
-
-#: ksgrd/HostConnector.cc:76
-msgid "Daemon"
-msgstr "Daemon"
-
-#: ksgrd/HostConnector.cc:77
-msgid ""
-"Select this if you want to connect to a ksysguard daemon that is running on the "
-"machine you want to connect to, and is listening for client requests."
-msgstr ""
-"Izaberite ovo ako želite da se spojite na ksysguard demon koji je pokrenut na "
-"računaru na koji se želite spojiti, i koji sluša za zahtjeve klijenata."
-
-#: ksgrd/HostConnector.cc:80
-msgid "Custom command"
-msgstr "Vlastita naredba"
-
-#: ksgrd/HostConnector.cc:81
-msgid ""
-"Select this to use the command you entered below to start ksysguardd on the "
-"remote host."
-msgstr ""
-"Izaberite ovo da biste koristili naredbu unesenu ispod za pokretanje ksysguardd "
-"na udaljenom računaru."
-
-#: ksgrd/HostConnector.cc:84
-msgid "Port:"
-msgstr "Port:"
-
-#: ksgrd/HostConnector.cc:90
-msgid ""
-"Enter the port number on which the ksysguard daemon is listening for "
-"connections."
-msgstr "Unesite broj porta na kojem ksysguard demon očekuje konekcije."
-
-#: ksgrd/HostConnector.cc:93
-msgid "e.g.  3112"
-msgstr "npr.  3112"
-
-#: ksgrd/HostConnector.cc:96
-msgid "Command:"
-msgstr "Naredba:"
-
-#: ksgrd/HostConnector.cc:105
-msgid "Enter the command that runs ksysguardd on the host you want to monitor."
-msgstr ""
-"Unesite naredbu za pokretanje ksysguardd na računaru koji želite pratiti."
-
-#: ksgrd/HostConnector.cc:109
-msgid "e.g. ssh -l root remote.host.org ksysguardd"
-msgstr "npr.. ssh -l root remote.host.org ksysguardd"
-
-#: ksgrd/StyleSettings.cc:41
-msgid "Global Style Settings"
-msgstr "Postavke globalnog stila"
-
-#: ksgrd/StyleSettings.cc:44
-msgid "Display Style"
-msgstr "Stil pokazivača"
-
-#: ksgrd/StyleSettings.cc:47
-msgid "First foreground color:"
-msgstr "Prva boja teksta:"
-
-#: ksgrd/StyleSettings.cc:54
-msgid "Second foreground color:"
-msgstr "Druga boja teksta:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
-#: ksgrd/StyleSettings.cc:61 rc.cpp:126
-#, no-c-format
-msgid "Alarm color:"
-msgstr "Boja kod alarma:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
-#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
-#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
-#, no-c-format
-msgid "Background color:"
-msgstr "Boja pozadine:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:150
-#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
-msgid "Font size:"
-msgstr "Veličina slova:"
-
-#: ksgrd/StyleSettings.cc:85
-msgid "Sensor Colors"
-msgstr "Boja senzora"
-
-#: ksgrd/StyleSettings.cc:91
-msgid "Change Color..."
-msgstr "Izmjeni boju..."
-
-#: ksgrd/StyleSettings.cc:166
-#, c-format
-msgid "Color %1"
-msgstr "Boja %1"
-
-#. i18n: file SystemLoad.sgrd line 5
-#: ksgrd/SensorManager.cc:50 rc.cpp:173
-msgid "CPU Load"
-msgstr "CPU Load"
-
-#: ksgrd/SensorManager.cc:51
-msgid "Idle Load"
-msgstr "Idle Load"
-
-#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
-#: ksysguard.cc:171
-msgid "System Load"
-msgstr "System Load"
-
-#: ksgrd/SensorManager.cc:53
-msgid "Nice Load"
-msgstr "Nice Load"
-
-#: ksgrd/SensorManager.cc:54
-msgid "User Load"
-msgstr "User Load"
-
-#: ksgrd/SensorManager.cc:55
-msgid "Memory"
-msgstr "Memorija"
-
-#. i18n: file SystemLoad.sgrd line 13
-#: ksgrd/SensorManager.cc:56 rc.cpp:177
-msgid "Physical Memory"
-msgstr "Fizička memorija"
-
-#. i18n: file SystemLoad.sgrd line 21
-#: ksgrd/SensorManager.cc:57 rc.cpp:179
-msgid "Swap Memory"
-msgstr "Swap memorija"
-
-#: ksgrd/SensorManager.cc:58
-msgid "Cached Memory"
-msgstr "Cached memorija"
-
-#: ksgrd/SensorManager.cc:59
-msgid "Buffered Memory"
-msgstr "Buffered memorija"
-
-#: ksgrd/SensorManager.cc:60
-msgid "Used Memory"
-msgstr "Upotrijebljena memorija"
-
-#: ksgrd/SensorManager.cc:61
-msgid "Application Memory"
-msgstr "Memorija za aplikacije"
-
-#: ksgrd/SensorManager.cc:62
-msgid "Free Memory"
-msgstr "Slobodna memorija"
-
-#: ksgrd/SensorManager.cc:63
-msgid "Process Count"
-msgstr "Brojač procesa"
-
-#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
-msgid "Process Controller"
-msgstr "Kontroler procesa"
-
-#: ksgrd/SensorManager.cc:65
-msgid "Disk Throughput"
-msgstr "Propusnost diska"
-
-#: ksgrd/SensorManager.cc:66
-msgid ""
-"_: CPU Load\n"
-"Load"
-msgstr "Opterećenje"
-
-#: ksgrd/SensorManager.cc:67
-msgid "Total Accesses"
-msgstr "Ukupno pristupa"
-
-#: ksgrd/SensorManager.cc:68
-msgid "Read Accesses"
-msgstr "Pristupa za čitanje"
-
-#: ksgrd/SensorManager.cc:69
-msgid "Write Accesses"
-msgstr "Pristupa za pisanje"
-
-#: ksgrd/SensorManager.cc:70
-msgid "Read Data"
-msgstr "Čitanje podataka"
-
-#: ksgrd/SensorManager.cc:71
-msgid "Write Data"
-msgstr "Pisanje podataka"
-
-#: ksgrd/SensorManager.cc:72
-msgid "Pages In"
-msgstr "Ulaznih stranica"
-
-#: ksgrd/SensorManager.cc:73
-msgid "Pages Out"
-msgstr "Izlaznih stranica"
-
-#: ksgrd/SensorManager.cc:74
-msgid "Context Switches"
-msgstr "Context Switches"
-
-#: ksgrd/SensorManager.cc:75
-msgid "Network"
-msgstr "Mreža"
-
-#: ksgrd/SensorManager.cc:76
-msgid "Interfaces"
-msgstr "Interfejsi"
-
-#: ksgrd/SensorManager.cc:77
-msgid "Receiver"
-msgstr "Prijemnik"
-
-#: ksgrd/SensorManager.cc:78
-msgid "Transmitter"
-msgstr "Predajnik"
-
-#: ksgrd/SensorManager.cc:79
-msgid "Data"
-msgstr "Podaci"
-
-#: ksgrd/SensorManager.cc:80
-msgid "Compressed Packets"
-msgstr "Kompresovani paketi"
-
-#: ksgrd/SensorManager.cc:81
-msgid "Dropped Packets"
-msgstr "Ispušteni paketi"
-
-#: ksgrd/SensorManager.cc:82
-msgid "Errors"
-msgstr "Greške"
-
-#: ksgrd/SensorManager.cc:83
-msgid "FIFO Overruns"
-msgstr "FIFO Overruns"
-
-#: ksgrd/SensorManager.cc:84
-msgid "Frame Errors"
-msgstr "Frame Errors"
-
-#: ksgrd/SensorManager.cc:85
-msgid "Multicast"
-msgstr "Multicast"
-
-#: ksgrd/SensorManager.cc:86
-msgid "Packets"
-msgstr "Paketi"
-
-#: ksgrd/SensorManager.cc:87
-msgid "Carrier"
-msgstr "Carrier"
-
-#: ksgrd/SensorManager.cc:88
-msgid "Collisions"
-msgstr "Sudari"
-
-#: ksgrd/SensorManager.cc:89
-msgid "Sockets"
-msgstr "Sockets"
-
-#: ksgrd/SensorManager.cc:90
-msgid "Total Number"
-msgstr "Ukupan broj"
-
-#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
-msgid "Table"
-msgstr "Tabela"
-
-#: ksgrd/SensorManager.cc:92
-msgid "Advanced Power Management"
-msgstr "Napredno upravljanje energijom"
-
-#: ksgrd/SensorManager.cc:93
-msgid "ACPI"
-msgstr "ACPI"
-
-#: ksgrd/SensorManager.cc:94
-msgid "Thermal Zone"
-msgstr "Termalna zona"
-
-#: ksgrd/SensorManager.cc:95
-msgid "Temperature"
-msgstr "Temperatura"
-
-#: ksgrd/SensorManager.cc:96
-msgid "Fan"
-msgstr "Ventilator"
-
-#: ksgrd/SensorManager.cc:97
-msgid "State"
-msgstr "Status"
-
-#: ksgrd/SensorManager.cc:98
-msgid "Battery"
-msgstr "Baterija"
-
-#: ksgrd/SensorManager.cc:99
-msgid "Battery Charge"
-msgstr "Punjenje baterije"
-
-#: ksgrd/SensorManager.cc:100
-msgid "Battery Usage"
-msgstr "Upotreba baterije"
-
-#: ksgrd/SensorManager.cc:101
-msgid "Remaining Time"
-msgstr "Preostalo vrijeme"
-
-#: ksgrd/SensorManager.cc:102
-msgid "Interrupts"
-msgstr "Prekidi"
-
-#. i18n: file SystemLoad.sgrd line 10
-#: ksgrd/SensorManager.cc:103 rc.cpp:175
-msgid "Load Average (1 min)"
-msgstr "Prosječno opterećenje (1 min)"
-
-#: ksgrd/SensorManager.cc:104
-msgid "Load Average (5 min)"
-msgstr "Prosječno opterećenje (5 min)"
-
-#: ksgrd/SensorManager.cc:105
-msgid "Load Average (15 min)"
-msgstr "Prosječno opterećenje (15 min)"
-
-#: ksgrd/SensorManager.cc:106
-msgid "Clock Frequency"
-msgstr "Frekvencija sata"
-
-#: ksgrd/SensorManager.cc:107
-msgid "Hardware Sensors"
-msgstr "Hardverski senzori"
-
-#: ksgrd/SensorManager.cc:108
-msgid "Partition Usage"
-msgstr "Iskorištenost particija"
-
-#: ksgrd/SensorManager.cc:109
-msgid "Used Space"
-msgstr "Iskorišteni prostor"
-
-#: ksgrd/SensorManager.cc:110
-msgid "Free Space"
-msgstr "Slobodan prostor"
-
-#: ksgrd/SensorManager.cc:111
-msgid "Fill Level"
-msgstr "Nivo popunjenosti"
-
-#: ksgrd/SensorManager.cc:115
-#, c-format
-msgid "CPU%1"
-msgstr "CPU%1"
-
-#: ksgrd/SensorManager.cc:117
-#, c-format
-msgid "Disk%1"
-msgstr "Disk%1"
-
-#: ksgrd/SensorManager.cc:122
-#, c-format
-msgid "Fan%1"
-msgstr "Ventilator%1"
-
-#: ksgrd/SensorManager.cc:124
-#, c-format
-msgid "Temperature%1"
-msgstr "Temperatura%1"
-
-#: ksgrd/SensorManager.cc:127
-msgid "Total"
-msgstr "Ukupno"
-
-#: ksgrd/SensorManager.cc:133
-#, c-format
-msgid "Int%1"
-msgstr "Int%1"
-
-#: ksgrd/SensorManager.cc:140
-msgid ""
-"_: the unit 1 per second\n"
-"1/s"
-msgstr "1/s"
-
-#: ksgrd/SensorManager.cc:141
-msgid "kBytes"
-msgstr "kBajta"
-
-#: ksgrd/SensorManager.cc:142
-msgid ""
-"_: the unit minutes\n"
-"min"
-msgstr "min"
-
-#: ksgrd/SensorManager.cc:143
-msgid ""
-"_: the frequency unit\n"
-"MHz"
-msgstr "MHz"
-
-#: ksgrd/SensorManager.cc:146
-msgid "Integer Value"
-msgstr "Cjelobrojna vrijednost"
-
-#: ksgrd/SensorManager.cc:147
-msgid "Floating Point Value"
-msgstr "Vrijednost sa tekućim zarezom"
-
-#: ksgrd/SensorManager.cc:289
-msgid "Connection to %1 has been lost."
-msgstr "Konekcija na %1 je izgubljena."
-
-#: ksgrd/SensorSocketAgent.cc:104
-msgid "Connection to %1 refused"
-msgstr "%1 odbija konekciju"
-
-#: ksgrd/SensorSocketAgent.cc:108
-msgid "Host %1 not found"
-msgstr "Računar %1 nije pronađen"
-
-#: ksgrd/SensorSocketAgent.cc:112
-#, c-format
-msgid "Timeout at host %1"
-msgstr "Greška u čitanju sa računara %1"
-
-#: ksgrd/SensorSocketAgent.cc:116
-#, c-format
-msgid "Network failure host %1"
-msgstr "Mrežna greška računar %1"
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Vedran Ljubović"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "vljubovic@smartnet.ba"
-
-#: Workspace.cc:53
-msgid ""
-"This is your work space. It holds your worksheets. You need to create a new "
-"worksheet (Menu File->New) before you can drag sensors here."
-msgstr ""
-"Ovo je vaš radni prostor. On sadrži vaše radne listove. Možete napraviti novi "
-"radni list (u meniju Datoteka -> Novi) prije nego što ovdje dovučete senzore."
-
-#: Workspace.cc:105 ksysguard.cc:176
-msgid "Process Table"
-msgstr "Tabela procesa"
-
-#: Workspace.cc:135
-#, c-format
-msgid "Sheet %1"
-msgstr "List %1"
-
-#: Workspace.cc:165 Workspace.cc:305
-msgid ""
-"The worksheet '%1' contains unsaved data.\n"
-"Do you want to save the worksheet?"
-msgstr ""
-"List '%1' sadrži podatke koji nisu snimljeni.\n"
-"Da li želite snimiti list?"
-
-#: Workspace.cc:181 Workspace.cc:235
-msgid "*.sgrd|Sensor Files"
-msgstr "*.sgrd|Senzor datoteke"
-
-#: Workspace.cc:184
-msgid "Select Worksheet to Load"
-msgstr "Odaberite radni list za učitavanje"
-
-#: Workspace.cc:229 Workspace.cc:269
-msgid "You do not have a worksheet that could be saved."
-msgstr "Ne postoji niti jedan radni list koji možete snimiti."
-
-#: Workspace.cc:239
-msgid "Save Current Worksheet As"
-msgstr "Snimi sadašnji radni list kao"
-
-#: Workspace.cc:320
-msgid "There are no worksheets that could be deleted."
-msgstr "Ne postoji niti jedan radni list koji možete obrisati."
-
-#: Workspace.cc:448
-msgid "Cannot find file ProcessTable.sgrd."
-msgstr "Ne mogu pronaći datoteku ProcessTable.sgrd."
-
-#: KSGAppletSettings.cc:34
-#, fuzzy
-msgid "System Guard Settings"
-msgstr "Postavke KSysguard appleta"
-
-#: KSGAppletSettings.cc:42
-msgid "Number of displays:"
-msgstr "Broj pokazivača:"
-
-#: KSGAppletSettings.cc:50
-msgid "Size ratio:"
-msgstr "Omjer veličine:"
-
-#: KSGAppletSettings.cc:54
-#, c-format
-msgid "%"
-msgstr "%"
-
-#: SensorDisplayLib/ProcessList.cc:110
-msgid ""
-"_: process status\n"
-"running"
-msgstr "aktivan"
-
-#: SensorDisplayLib/ProcessList.cc:112
-msgid ""
-"_: process status\n"
-"sleeping"
-msgstr "spava"
-
-#: SensorDisplayLib/ProcessList.cc:114
-msgid ""
-"_: process status\n"
-"disk sleep"
-msgstr "spava na disku"
-
-#: SensorDisplayLib/ProcessList.cc:115
-msgid ""
-"_: process status\n"
-"zombie"
-msgstr "zombi"
-
-#: SensorDisplayLib/ProcessList.cc:117
-msgid ""
-"_: process status\n"
-"stopped"
-msgstr "zaustavljen"
-
-#: SensorDisplayLib/ProcessList.cc:118
-msgid ""
-"_: process status\n"
-"paging"
-msgstr "na stranici"
-
-#: SensorDisplayLib/ProcessList.cc:119
-msgid ""
-"_: process status\n"
-"idle"
-msgstr "čeka"
-
-#: SensorDisplayLib/ProcessList.cc:250
-msgid "Remove Column"
-msgstr "Ukloni kolonu"
-
-#: SensorDisplayLib/ProcessList.cc:251
-msgid "Add Column"
-msgstr "Dodaj kolonu"
-
-#: SensorDisplayLib/ProcessList.cc:252
-msgid "Help on Column"
-msgstr "Pomoć o koloni"
-
-#: SensorDisplayLib/ProcessController.cc:62
-#: SensorDisplayLib/ProcessList.cc:771
-msgid "Nice"
-msgstr "Nice"
-
-#: SensorDisplayLib/ProcessList.cc:776
-msgid "Hide Column"
-msgstr "Sakrij kolonu"
-
-#: SensorDisplayLib/ProcessList.cc:782
-msgid "Show Column"
-msgstr "Prikaži kolonu"
-
-#: SensorDisplayLib/ProcessList.cc:786
-msgid "Select All Processes"
-msgstr "Izaberi sve procese"
-
-#: SensorDisplayLib/ProcessList.cc:787
-msgid "Unselect All Processes"
-msgstr "Odznači sve procese"
-
-#: SensorDisplayLib/ProcessList.cc:793
-msgid "Select All Child Processes"
-msgstr "Izaberi sve procese - djecu"
-
-#: SensorDisplayLib/ProcessList.cc:794
-msgid "Unselect All Child Processes"
-msgstr "Odznači sve procese - djecu"
-
-#: SensorDisplayLib/ProcessList.cc:796
-msgid "SIGABRT"
-msgstr "SIGABRT"
-
-#: SensorDisplayLib/ProcessList.cc:797
-msgid "SIGALRM"
-msgstr "SIGALRM"
-
-#: SensorDisplayLib/ProcessList.cc:798
-msgid "SIGCHLD"
-msgstr "SIGCHLD"
-
-#: SensorDisplayLib/ProcessList.cc:799
-msgid "SIGCONT"
-msgstr "SIGCONT"
-
-#: SensorDisplayLib/ProcessList.cc:800
-msgid "SIGFPE"
-msgstr "SIGFPE"
-
-#: SensorDisplayLib/ProcessList.cc:801
-msgid "SIGHUP"
-msgstr "SIGHUP"
-
-#: SensorDisplayLib/ProcessList.cc:802
-msgid "SIGILL"
-msgstr "SIGILL"
-
-#: SensorDisplayLib/ProcessList.cc:803
-msgid "SIGINT"
-msgstr "SIGINT"
-
-#: SensorDisplayLib/ProcessList.cc:804
-msgid "SIGKILL"
-msgstr "SIGKILL"
-
-#: SensorDisplayLib/ProcessList.cc:805
-msgid "SIGPIPE"
-msgstr "SIGPIPE"
-
-#: SensorDisplayLib/ProcessList.cc:806
-msgid "SIGQUIT"
-msgstr "SIGQUIT"
-
-#: SensorDisplayLib/ProcessList.cc:807
-msgid "SIGSEGV"
-msgstr "SIGSEGV"
-
-#: SensorDisplayLib/ProcessList.cc:808
-msgid "SIGSTOP"
-msgstr "SIGSTOP"
-
-#: SensorDisplayLib/ProcessList.cc:809
-msgid "SIGTERM"
-msgstr "SIGTERM"
-
-#: SensorDisplayLib/ProcessList.cc:810
-msgid "SIGTSTP"
-msgstr "SIGTSTP"
-
-#: SensorDisplayLib/ProcessList.cc:811
-msgid "SIGTTIN"
-msgstr "SIGTTIN"
-
-#: SensorDisplayLib/ProcessList.cc:812
-msgid "SIGTTOU"
-msgstr "SIGTTOU"
-
-#: SensorDisplayLib/ProcessList.cc:813
-msgid "SIGUSR1"
-msgstr "SIGUSR1"
-
-#: SensorDisplayLib/ProcessList.cc:814
-msgid "SIGUSR2"
-msgstr "SIGUSR2"
-
-#: SensorDisplayLib/ProcessList.cc:817
-msgid "Send Signal"
-msgstr "Pošalji signal"
-
-#: SensorDisplayLib/ProcessList.cc:825
-msgid "Renice Process..."
-msgstr "Renice procesa..."
-
-#: SensorDisplayLib/ProcessList.cc:873
-msgid ""
-"_n: Do you really want to send signal %1 to the selected process?\n"
-"Do you really want to send signal %1 to the %n selected processes?"
-msgstr ""
-"Da li stvarno želite poslati signal %1 za %n izabrani proces?\n"
-"Da li stvarno želite poslati signal %1 za %n izabrana procesa?\n"
-"Da li stvarno želite poslati signal %1 za %n izabranih procesa?"
-
-#: SensorDisplayLib/ProcessList.cc:877
-msgid "Send"
-msgstr "Pošalji"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:43
-msgid "Edit BarGraph Preferences"
-msgstr "Izmjeni postavke bar grafa"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:47
-msgid "Range"
-msgstr "Opseg"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
-#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
-#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
-#, no-c-format
-msgid "Title"
-msgstr "Naslov"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
-#: SensorDisplayLib/DancingBarsSettings.cc:54
-#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
-#, no-c-format
-msgid "Enter the title of the display here."
-msgstr "Unesite naslov pokazivača."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:59
-msgid "Display Range"
-msgstr "Opseg pokazivača"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:63
-#: SensorDisplayLib/FancyPlotterSettings.cc:89
-msgid "Minimum value:"
-msgstr "Minimalna vrijednost:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:67
-#: SensorDisplayLib/FancyPlotterSettings.cc:95
-msgid ""
-"Enter the minimum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-"Unesite najmanju vrijednost pokazivača. Ako su obje vrijednosti 0, tada će se "
-"automatski određivati opseg."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:71
-#: SensorDisplayLib/FancyPlotterSettings.cc:99
-msgid "Maximum value:"
-msgstr "Maksimalna vrijednost:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:75
-#: SensorDisplayLib/FancyPlotterSettings.cc:105
-msgid ""
-"Enter the maximum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-"Unesite najveću vrijednost pokazivača. Ako su obje vrijednosti 0, tada će se "
-"automatski određivati opseg."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
-#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
-#, no-c-format
-msgid "Alarms"
-msgstr "Alarmi"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
-#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
-#, no-c-format
-msgid "Alarm for Minimum Value"
-msgstr "Alarm za minimalnu vrijednost"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:91
-#: SensorDisplayLib/DancingBarsSettings.cc:109
-msgid "Enable alarm"
-msgstr "Uključi alarm"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
-#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
-#, no-c-format
-msgid "Enable the minimum value alarm."
-msgstr "Uključi alarm za najmanju vrijedost."
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
-#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
-#, no-c-format
-msgid "Lower limit:"
-msgstr "Donja granica:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
-#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
-#, no-c-format
-msgid "Alarm for Maximum Value"
-msgstr "Alarm za maksimalnu vrijednost"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
-#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
-#, no-c-format
-msgid "Enable the maximum value alarm."
-msgstr "Uključi alarm za najveću vrijedost."
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
-#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
-#, no-c-format
-msgid "Upper limit:"
-msgstr "Gornja granica:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:126
-msgid "Look"
-msgstr "Pogled"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:129
-msgid "Normal bar color:"
-msgstr "Obična boja trake:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:136
-msgid "Out-of-range color:"
-msgstr "Boja za prekoračenje:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:154
-msgid ""
-"This determines the size of the font used to print a label underneath the bars. "
-"Bars are automatically suppressed if text becomes too large, so it is advisable "
-"to use a small font size here."
-msgstr ""
-"Ovdje se određuje veličina fonta kojim će se ispisivati oznake ispod traka. "
-"Veličina trake će biti smanjena ukoliko je tekst prevelik, pa je bolje ne "
-"pretjerati s veličinom slova."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:161
-#: SensorDisplayLib/FancyPlotterSettings.cc:224
-msgid "Sensors"
-msgstr "Senzori"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:166
-#: SensorDisplayLib/FancyPlotterSettings.cc:231
-msgid "Host"
-msgstr "Računar"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:167
-#: SensorDisplayLib/FancyPlotterSettings.cc:232
-msgid "Sensor"
-msgstr "Senzor"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:168
-msgid "Label"
-msgstr "Oznaka"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:169
-#: SensorDisplayLib/FancyPlotterSettings.cc:233
-msgid "Unit"
-msgstr "Jedinica"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:170
-#: SensorDisplayLib/FancyPlotterSettings.cc:234
-#: SensorDisplayLib/ProcessController.cc:59
-msgid "Status"
-msgstr "Status"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:174
-msgid "Edit..."
-msgstr "Izmjeni..."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:176
-msgid "Push this button to configure the label."
-msgstr "Pritnisnite ovo dugme da podesite naslov."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:181
-#: SensorDisplayLib/FancyPlotterSettings.cc:249
-msgid "Push this button to delete the sensor."
-msgstr "Pritnisnite ovo dugme za brisanje senzora."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:356
-msgid "Label of Bar Graph"
-msgstr "Naslov bar grafa"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:357
-msgid "Enter new label:"
-msgstr "Unesite novu oznaku:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:47
-msgid "Signal Plotter Settings"
-msgstr "Postavke plotera signala"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:57
-msgid "Style"
-msgstr "Stil"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:60
-msgid "Title:"
-msgstr "Naslov:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:69
-msgid "Graph Drawing Style"
-msgstr "Stil crtanja krivulje"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:71
-msgid "Basic polygons"
-msgstr "Osnovni poligoni"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:73
-msgid "Original - single line per data point"
-msgstr "Original - jedna linija za jednu tačku"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:78
-msgid "Scales"
-msgstr "Stepenice"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:81
-msgid "Vertical Scale"
-msgstr "Uspravna skala"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:85
-msgid "Automatic range detection"
-msgstr "Automatsko određivanje opsega"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:86
-msgid ""
-"Check this box if you want the display range to adapt dynamically to the "
-"currently displayed values; if you do not check this, you have to specify the "
-"range you want in the fields below."
-msgstr ""
-"Uključite ovu opciju ako želite automatsko prilagođavanje opsega prema "
-"trenutnim vrijednostima, u suprotnom trebate unijeti opseg koji želite u "
-"poljima ispod."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:111
-msgid "Horizontal Scale"
-msgstr "Vodoravna skala"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:120
-msgid "pixel(s) per time period"
-msgstr "piksela po jedinici vremena"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:126
-msgid "Grid"
-msgstr "Mreža"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:129
-msgid "Lines"
-msgstr "Linije"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:133
-msgid "Vertical lines"
-msgstr "Uspravne linije"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:134
-msgid "Check this to activate the vertical lines if display is large enough."
-msgstr ""
-"Uključite ovo da aktivirate vertikalne linije ako je prikaz dovoljno velik."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:137
-msgid "Distance:"
-msgstr "Razmak:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:143
-msgid "Enter the distance between two vertical lines here."
-msgstr "Unesite razmak između dvije uspravne linije."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:147
-msgid "Vertical lines scroll"
-msgstr "Skrolovanje uspravnih linija"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:150
-msgid "Horizontal lines"
-msgstr "Vodoravne linije"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:151
-msgid "Check this to enable horizontal lines if display is large enough."
-msgstr ""
-"Ovdje možete omogućiti prikaz vodoravnim trakama ako je prikaz dovoljno velik."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:154
-msgid "Count:"
-msgstr "Broj:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:160
-msgid "Enter the number of horizontal lines here."
-msgstr "Unesite broj vodoravnih linija."
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
-#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
-#, no-c-format
-msgid "Text"
-msgstr "Tekst"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:172
-msgid "Labels"
-msgstr "Oznake"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:173
-msgid ""
-"Check this box if horizontal lines should be decorated with the values they "
-"mark."
-msgstr ""
-"Ovdje možete omogućiti hoće li vodoravne linije biti ukrašene vrijednostima "
-"koje pokazuju."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:185
-msgid "Top bar"
-msgstr " Gornja traka"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:186
-msgid ""
-"Check this to active the display title bar. This is probably only useful for "
-"applet displays. The bar is only visible if the display is large enough."
-msgstr ""
-"Ovdje možete uključiti traku s nazivom, što je vjerovatno korisno smo kod "
-"prikazivanja appleta, jer je traka vidljiva samo ako je prikaz dovoljno velik."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
-#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
-#: rc.cpp:117 rc.cpp:138
-#, no-c-format
-msgid "Colors"
-msgstr "Boje"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:196
-msgid "Vertical lines:"
-msgstr "Uspravne linije:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:203
-msgid "Horizontal lines:"
-msgstr "Vodoravne linije:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:210
-msgid "Background:"
-msgstr "Pozadina:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:242
-msgid "Set Color..."
-msgstr "Podesi boju..."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:244
-msgid "Push this button to configure the color of the sensor in the diagram."
-msgstr "Pritisnite ovo dugme za podešavanje boje senzora u dijagramu."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:252
-msgid "Move Up"
-msgstr "Pomakni gore"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:256
-msgid "Move Down"
-msgstr "Pomakni dole"
-
-#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
-msgid "Sensor Logger"
-msgstr "Dnevnik senzora"
-
-#: SensorDisplayLib/SensorDisplay.cc:162
-msgid "Launch &System Guard"
-msgstr "Pokreni &System Guard"
-
-#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
-msgid "&Properties"
-msgstr "&Postavke"
-
-#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
-msgid "&Remove Display"
-msgstr "&Ukloni pokazivač"
-
-#: SensorDisplayLib/SensorDisplay.cc:169
-msgid "&Setup Update Interval..."
-msgstr "&Podesi vrijeme osvježavanja..."
-
-#: SensorDisplayLib/SensorDisplay.cc:171
-msgid "&Continue Update"
-msgstr "&Nastavi obnavljanje"
-
-#: SensorDisplayLib/SensorDisplay.cc:173
-msgid "P&ause Update"
-msgstr "P&auziraj obnavljanje"
-
-#: SensorDisplayLib/SensorDisplay.cc:240
-msgid ""
-"<qt>"
-"<p>This is a sensor display. To customize a sensor display click and hold the "
-"right mouse button on either the frame or the display box and select the <i>"
-"Properties</i> entry from the popup menu. Select <i>Remove</i> "
-"to delete the display from the worksheet.</p>%1</qt>"
-msgstr ""
-"<qt>"
-"<p>Ovo je prikaz senzora. Da biste podesili prikaz senzora, kliknite i držite "
-"desno dugme miša na ili okvir ili kocku sa prikazom i odaberite stavku <i>"
-"Osobine</i> sa menija. Izaberite <i>Ukloni</i> ako želite obrisati prikaz sa "
-"radnog lista.</p>%1</qt>"
-
-#: SensorDisplayLib/SensorLogger.cc:136
-msgid "Logging"
-msgstr "Vođenje dnevnika"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
-#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
-#, no-c-format
-msgid "Timer Interval"
-msgstr "Vremenski razmak"
-
-#: SensorDisplayLib/SensorLogger.cc:138
-msgid "Sensor Name"
-msgstr "Ime senzora"
-
-#: SensorDisplayLib/SensorLogger.cc:139
-msgid "Host Name"
-msgstr "Ime računara"
-
-#: SensorDisplayLib/SensorLogger.cc:140
-msgid "Log File"
-msgstr "Dnevnik"
-
-#: SensorDisplayLib/SensorLogger.cc:383
-msgid "&Remove Sensor"
-msgstr "&Ukloni senzor"
-
-#: SensorDisplayLib/SensorLogger.cc:384
-msgid "&Edit Sensor..."
-msgstr "&Izmjeni senzor..."
-
-#: SensorDisplayLib/SensorLogger.cc:396
-msgid "St&op Logging"
-msgstr "Prekini &zapisivanje u dnevnk"
-
-#: SensorDisplayLib/SensorLogger.cc:398
-msgid "S&tart Logging"
-msgstr "Počni &vođenje dnevnika"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
-#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
-#, no-c-format
-msgid "Foreground color:"
-msgstr "Boja teksta:"
-
-#: SensorDisplayLib/MultiMeterSettings.cc:26
-msgid "Multimeter Settings"
-msgstr "Postavke multimetra"
-
-#: SensorDisplayLib/ListViewSettings.cc:26
-msgid "List View Settings"
-msgstr "Postavke prikaza liste"
-
-#: SensorDisplayLib/ReniceDlg.cc:32
-msgid "Renice Process"
-msgstr "Renice procesa"
-
-#: SensorDisplayLib/ReniceDlg.cc:40
-msgid ""
-"You are about to change the scheduling priority of\n"
-"process %1. Be aware that only the Superuser (root)\n"
-"can decrease the nice level of a process. The lower\n"
-"the number is the higher the priority.\n"
-"\n"
-"Please enter the desired nice level:"
-msgstr ""
-"Upravo ćete promjeniti raspored prioriteta procesa\n"
-"%1. Imajte na umu da samo administrator (root) može\n"
-"smanjiti 'nice' nivo procesa. Što je niži 'nice', to je veći \n"
-"prioritet procesa.\n"
-"\n"
-"Molim unesite željeni 'nice' nivo:"
-
-#: SensorDisplayLib/SensorLoggerSettings.cc:26
-msgid "Sensor Logger Settings"
-msgstr "Postavke dnevnika senzora"
-
-#: SensorDisplayLib/DummyDisplay.cc:33
-msgid "Drop Sensor Here"
-msgstr "Ovdje ispustite senzor"
-
-#: SensorDisplayLib/DummyDisplay.cc:38
-msgid ""
-"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
-"and drop it here. A sensor display will appear that allows you to monitor the "
-"values of the sensor over time."
-msgstr ""
-"Ovo je slobodan prostor na radnom listu. Povucite senzor sa Preglednika senzora "
-"i ispustite ga ovdje. Pojaviće se pokazivač senzora pomoću kojeg možete pratiti "
-"vrijednosti senzora kroz vrijeme."
-
-#: SensorDisplayLib/ProcessController.cc:54
-msgid "Name"
-msgstr "Ime"
-
-#: SensorDisplayLib/ProcessController.cc:55
-msgid "PID"
-msgstr "PID"
-
-#: SensorDisplayLib/ProcessController.cc:56
-msgid "PPID"
-msgstr "PPID"
-
-#: SensorDisplayLib/ProcessController.cc:57
-msgid "UID"
-msgstr "UID"
-
-#: SensorDisplayLib/ProcessController.cc:58
-msgid "GID"
-msgstr "GID"
-
-#: SensorDisplayLib/ProcessController.cc:60
-#, c-format
-msgid "User%"
-msgstr "Korisnik%"
-
-#: SensorDisplayLib/ProcessController.cc:61
-#, c-format
-msgid "System%"
-msgstr "Sistem%"
-
-#: SensorDisplayLib/ProcessController.cc:63
-msgid "VmSize"
-msgstr "VmSize"
-
-#: SensorDisplayLib/ProcessController.cc:64
-msgid "VmRss"
-msgstr "VmRss"
-
-#: SensorDisplayLib/ProcessController.cc:65
-msgid "Login"
-msgstr "Login"
-
-#: SensorDisplayLib/ProcessController.cc:66
-msgid "Command"
-msgstr "Naredba"
-
-#: SensorDisplayLib/ProcessController.cc:97
-msgid "All Processes"
-msgstr "Svi procesi"
-
-#: SensorDisplayLib/ProcessController.cc:98
-msgid "System Processes"
-msgstr "Sistemski procesi"
-
-#: SensorDisplayLib/ProcessController.cc:99
-msgid "User Processes"
-msgstr "Korisnički procesi"
-
-#: SensorDisplayLib/ProcessController.cc:100
-msgid "Own Processes"
-msgstr "Vlastiti procesi"
-
-#: SensorDisplayLib/ProcessController.cc:103
-msgid "&Tree"
-msgstr "S&tablo"
-
-#: SensorDisplayLib/ProcessController.cc:116
-msgid "&Refresh"
-msgstr "&Osvježi"
-
-#: SensorDisplayLib/ProcessController.cc:123
-msgid "&Kill"
-msgstr "&Ubij"
-
-#: SensorDisplayLib/ProcessController.cc:206
-msgid "%1: Running Processes"
-msgstr "%1: pokrenutih procesa"
-
-#: SensorDisplayLib/ProcessController.cc:239
-msgid "You need to select a process first."
-msgstr "Prvo morate izabrati proces."
-
-#: SensorDisplayLib/ProcessController.cc:245
-#, c-format
-msgid ""
-"_n: Do you want to kill the selected process?\n"
-"Do you want to kill the %n selected processes?"
-msgstr ""
-"Da li želite ubiti %n izabrani proces?\n"
-"Da li želite ubiti %n izabrana procesa?\n"
-"Da li želite ubiti %n izabranih procesa?"
-
-#: SensorDisplayLib/ProcessController.cc:248
-msgid "Kill Process"
-msgstr "Ubij proces"
-
-#: SensorDisplayLib/ProcessController.cc:252
-msgid "Kill"
-msgstr "Ubij"
-
-#: SensorDisplayLib/ProcessController.cc:258
-msgid "Do not ask again"
-msgstr "Ne pitaj više"
-
-#: SensorDisplayLib/ProcessController.cc:344
-#, c-format
-msgid "Error while attempting to kill process %1."
-msgstr "Greška pri pokušaju ubijanja procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:349
-#, c-format
-msgid "Insufficient permissions to kill process %1."
-msgstr "Nedovoljne privilegije za ubijanje procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:354
-#: SensorDisplayLib/ProcessController.cc:389
-msgid "Process %1 has already disappeared."
-msgstr "Proces %1 je već nestao."
-
-#: SensorDisplayLib/ProcessController.cc:358
-msgid "Invalid Signal."
-msgstr "Neispravan signal."
-
-#: SensorDisplayLib/ProcessController.cc:379
-#, c-format
-msgid "Error while attempting to renice process %1."
-msgstr "Greška pri pokušaju renice-a procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:384
-#, c-format
-msgid "Insufficient permissions to renice process %1."
-msgstr "Nedovoljne privilegije za renice procesa %1."
-
-#: SensorDisplayLib/ProcessController.cc:393
-msgid "Invalid argument."
-msgstr "Neispravan argument."
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
-#: rc.cpp:27 rc.cpp:78
-#, no-c-format
-msgid "&Enable alarm"
-msgstr "&Uključi alarm"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
-#: rc.cpp:39 rc.cpp:66
-#, no-c-format
-msgid "E&nable alarm"
-msgstr "U&ključi alarm"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
-#: rc.cpp:54
-#, no-c-format
-msgid "&Show unit"
-msgstr "P&rikaži jedinice"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
-#: rc.cpp:57
-#, no-c-format
-msgid "Enable this to append the unit to the title of the display."
-msgstr "Ovdje možete omogućiti ispis jedinice na naslovu prikaza."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
-#: rc.cpp:90
-#, no-c-format
-msgid "Normal digit color:"
-msgstr "Obična boja cifara:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
-#: rc.cpp:93
-#, no-c-format
-msgid "Alarm digit color:"
-msgstr "Boja cifara kod alarma:"
-
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
-#: rc.cpp:105 rc.cpp:120
-#, no-c-format
-msgid "Text color:"
-msgstr "Boja teksta:"
-
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
-#: rc.cpp:108
-#, no-c-format
-msgid "Grid color:"
-msgstr "Boja mreže:"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
-#: rc.cpp:129
-#, no-c-format
-msgid "Log File Settings"
-msgstr "Postavke datoteke s dnevnikom"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
-#: rc.cpp:150
-#, no-c-format
-msgid "Select Font..."
-msgstr "Izaberi font..."
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
-#: rc.cpp:153
-#, no-c-format
-msgid "Filter"
-msgstr "Filter"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
-#: rc.cpp:156
-#, no-c-format
-msgid "&Add"
-msgstr "&Dodaj"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
-#: rc.cpp:162
-#, no-c-format
-msgid "&Change"
-msgstr "&Promjeni"
-
-#. i18n: file KSysGuardApplet.xml line 5
-#: rc.cpp:181
-msgid "CPU"
-msgstr "CPU"
-
-#. i18n: file KSysGuardApplet.xml line 10
-#: rc.cpp:183
-msgid "Mem"
-msgstr "Mem"
-
-#: WorkSheetSettings.cc:41
-msgid "Worksheet Properties"
-msgstr "Postavke radnog lista"
-
-#: WorkSheetSettings.cc:67
-msgid "Rows:"
-msgstr "Redovi:"
-
-#: WorkSheetSettings.cc:76
-msgid "Columns:"
-msgstr "Kolone:"
-
-#: WorkSheetSettings.cc:97
-msgid "Enter the number of rows the sheet should have."
-msgstr "Unesite broj redova lista."
-
-#: WorkSheetSettings.cc:98
-msgid "Enter the number of columns the sheet should have."
-msgstr "Unesite broj kolona lista."
-
-#: WorkSheetSettings.cc:100
-msgid "Enter the title of the worksheet here."
-msgstr "Ovdje unosite naslov lista."
-
-#: KSysGuardApplet.cc:212
-msgid "&Dancing Bars"
-msgstr "P&lešuće trake"
-
-#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
-msgid ""
-"The KSysGuard applet does not support displaying of this type of sensor. Please "
-"choose another sensor."
-msgstr ""
-"KSysGuard ne podržava prikaz ove vrste senzora. Molim odaberite drugi senzor."
-
-#: KSysGuardApplet.cc:334
-msgid ""
-"The file %1 does not contain a valid applet definition, which must have a "
-"document type 'KSysGuardApplet'."
-msgstr ""
-"Datoteka %1 ne sadrži ispravan opis applet-a, koji mora biti dokument tipa "
-"'KSysGuardApplet'."
-
-#: KSysGuardApplet.cc:488
-msgid "Drag sensors from the KDE System Guard into this cell."
-msgstr "Dovucite senzore sa KDE System Guard-a na ovo mjesto."
-
-#: SensorBrowser.cc:77
-msgid "Sensor Browser"
-msgstr "Preglednik senzora"
-
-#: SensorBrowser.cc:78
-msgid "Sensor Type"
-msgstr "Vrsta senzora"
-
-#: SensorBrowser.cc:81
-msgid "Drag sensors to empty cells of a worksheet or the panel applet."
-msgstr "Dovucite senzore u prazna polja radnog lista ili appleta na panelu."
-
-#: SensorBrowser.cc:88
-msgid ""
-"The sensor browser lists the connected hosts and the sensors that they provide. "
-"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
-"display will appear that visualizes the values provided by the sensor. Some "
-"sensor displays can display values of multiple sensors. Simply drag other "
-"sensors on to the display to add more sensors."
-msgstr ""
-"Pretraživač senzora daje listu računara na koje ste konektovani i senzora koje "
-"oni pružaju. Kliknite i odvucite senzore u za to predviđene oblasti radnog "
-"lista ili appleta na panelu. Tada će se pojaviti pokazivač koji prikazuje "
-"vrijednosti očitane sa senzora. Neki pokazivači mogu pokazivati vrijednosti "
-"više senzora, jednostavno povucite druge senzore na prikaz i oni će biti dodani "
-"istom."
-
-#: SensorBrowser.cc:148
-msgid "Drag sensors to empty fields in a worksheet."
-msgstr "Povucite senzore na prazna polja na radnom listu."
-
-#: ksysguard.cc:64
-msgid "KDE system guard"
-msgstr "KDE system guard"
-
-#: ksysguard.cc:74 ksysguard.cc:556
-msgid "KDE System Guard"
-msgstr "KDE System Guard"
-
-#: ksysguard.cc:100
-msgid "88888 Processes"
-msgstr "88888 Procesa"
-
-#: ksysguard.cc:101
-msgid "Memory: 88888888888 kB used, 88888888888 kB free"
-msgstr "Memorija: 88888888888 kB zauzeto, 88888888888 kB slobodno"
-
-#: ksysguard.cc:103
-msgid "Swap: 888888888 kB used, 888888888 kB free"
-msgstr "Swap: 888888888 kB zauzeto, 888888888 kB slobodno"
-
-#: ksysguard.cc:108
-msgid "&New Worksheet..."
-msgstr "&Novi radni list..."
-
-#: ksysguard.cc:111
-msgid "Import Worksheet..."
-msgstr "Uvezi radni list..."
-
-#: ksysguard.cc:114
-msgid "&Import Recent Worksheet"
-msgstr "&Uvezi skorašnje listove"
-
-#: ksysguard.cc:117
-msgid "&Remove Worksheet"
-msgstr "&Ukloni radni list"
-
-#: ksysguard.cc:120
-msgid "&Export Worksheet..."
-msgstr "&Izvezi radni list..."
-
-#: ksysguard.cc:125
-msgid "C&onnect Host..."
-msgstr "&Spoji računar..."
-
-#: ksysguard.cc:127
-msgid "D&isconnect Host"
-msgstr "O&dspoji računar"
-
-#: ksysguard.cc:133
-msgid "&Worksheet Properties"
-msgstr "&Postavke radnog lista"
-
-#: ksysguard.cc:136
-msgid "Load Standard Sheets"
-msgstr "Učitaj standardne listove"
-
-#: ksysguard.cc:140
-msgid "Configure &Style..."
-msgstr "Podešavanje &stila..."
-
-#: ksysguard.cc:157
-msgid "Do you really want to restore the default worksheets?"
-msgstr "Zaista želite vratiti podrazumjevane radne listove?"
-
-#: ksysguard.cc:158
-msgid "Reset All Worksheets"
-msgstr "Resetuj sve radne listove"
-
-#: ksysguard.cc:159
-msgid "Reset"
-msgstr "Poništi"
-
-#: ksysguard.cc:436
-#, c-format
-msgid ""
-"_n: 1 Process\n"
-"%n Processes"
-msgstr ""
-"%b proces\n"
-"%n procesa\n"
-"%n procesa"
-
-#: ksysguard.cc:446
-msgid "Memory: %1 %2 used, %3 %4 free"
-msgstr "Memorija: %1 %2 zauzeto, %3 %4 slobodno"
-
-#: ksysguard.cc:504
-msgid "No swap space available"
-msgstr "Nema slobodnog swap prostora"
-
-#: ksysguard.cc:506
-msgid "Swap: %1 %2 used, %3 %4 free"
-msgstr "Swap: %1 %2 zauzeto, %3 %4 slobodno"
-
-#: ksysguard.cc:515
-msgid "Show only process list of local host"
-msgstr "Prikaži samo procese na lokalnom računaru"
-
-#: ksysguard.cc:516
-msgid "Optional worksheet files to load"
-msgstr "Ostale datoteke s radnim listovima za učitavanje"
-
-#: ksysguard.cc:558
-msgid "(c) 1996-2002 The KSysGuard Developers"
-msgstr "(c) 1996-2002 KSysGuard programeri"
-
-#: ksysguard.cc:566
-msgid ""
-"Solaris Support\n"
-"Parts derived (by permission) from the sunos5\n"
-"module of William LeFebvre's \"top\" utility."
-msgstr ""
-"Solaris podrška\n"
-"Dijelovi izvedeni (uz dozvolu) iz sunos5\n"
-"modula \"top\" alata čiji je autor William LeFebvre."
-
-#~ msgid "#"
-#~ msgstr "#"