Automated l10n update (.po files)

1 files changed, 4172 insertions, 4172 deletions

diff --git a/tde-i18n-bs/messages/tdelibs/tdeprint.po b/tde-i18n-bs/messages/tdelibs/tdeprint.po
index 8a1a68701f9..7a536573c4e 100644
--- a/tde-i18n-bs/messages/tdelibs/tdeprint.po
+++ b/tde-i18n-bs/messages/tdelibs/tdeprint.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: tdeprint\n"
-"POT-Creation-Date: 2014-09-29 00:46-0500\n"
+"POT-Creation-Date: 2014-09-29 12:05-0500\n"
 "PO-Revision-Date: 2006-02-12 15:41+0100\n"
 "Last-Translator: Mirza Nakicevic <mirza@linux.org.ba>\n"
 "Language-Team: Bosnian <lokal@linux.org.ba>\n"
@@ -18,17 +18,2449 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.1\n"
 
-#: ppdloader.cpp:173
-msgid "(line %1): "
-msgstr "(linija %1): "
+#: kpgeneralpage.cpp:86
+msgid "ISO A4"
+msgstr "ISO A4"
 
-#: marginpreview.cpp:135
-msgid "No preview available"
-msgstr "Pregled nije dostupan"
+#: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30
+msgid "US Letter"
+msgstr "US Letter"
 
-#: kmfactory.cpp:221
-msgid "<qt>There was an error loading %1. The diagnostic is:<p>%2</p></qt>"
-msgstr "<qt>Došlo je do greške u učitavanju %1. Dijagnostika je:<p>%2</p></qt>"
+#: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29
+msgid "US Legal"
+msgstr "US Legal"
+
+#: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28
+msgid "Ledger"
+msgstr "Ledger"
+
+#: kpgeneralpage.cpp:90
+msgid "Folio"
+msgstr "Folio"
+
+#: kpgeneralpage.cpp:91
+msgid "US #10 Envelope"
+msgstr "US #10 Envelope"
+
+#: kpgeneralpage.cpp:92
+msgid "ISO DL Envelope"
+msgstr "ISO DL Envelope"
+
+#: kpgeneralpage.cpp:93
+msgid "Tabloid"
+msgstr "Tabloid"
+
+#: kpgeneralpage.cpp:94
+msgid "ISO A3"
+msgstr "ISO A3"
+
+#: kpgeneralpage.cpp:95
+msgid "ISO A2"
+msgstr "ISO A2"
+
+#: kpgeneralpage.cpp:96
+msgid "ISO A1"
+msgstr "ISO A1"
+
+#: kpgeneralpage.cpp:97
+msgid "ISO A0"
+msgstr "ISO A0"
+
+#: kpgeneralpage.cpp:107
+msgid "Upper Tray"
+msgstr "Gornji držač"
+
+#: kpgeneralpage.cpp:108
+msgid "Lower Tray"
+msgstr "Donji držač"
+
+#: kpgeneralpage.cpp:109
+msgid "Multi-Purpose Tray"
+msgstr "Višenamjenski držač"
+
+#: kpgeneralpage.cpp:110
+msgid "Large Capacity Tray"
+msgstr "Držač velikog kapaciteta"
+
+#: kpgeneralpage.cpp:114
+msgid "Normal"
+msgstr "Normalno"
+
+#: kpgeneralpage.cpp:115
+msgid "Transparency"
+msgstr "Providnost"
+
+#: kpgeneralpage.cpp:124
+msgid ""
+" <qt>  "
+"<p><b>\"General\"</b> </p>  "
+"<p>This dialog page contains <em>general</em> print job settings. General "
+"settings are applicable to most printers, most jobs  and most job file types.  "
+"<p>To get more specific help, enable the \"WhatsThis\" cursor and click on any "
+"of the  text labels or GUI elements of this dialog.  </qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:132
+msgid ""
+" <qt>  "
+"<p><b>Page size:</b> Select paper size to be printed on from  the drop-down "
+"menu. </p> "
+"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed.</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o PageSize=...         # examples: \"A4\" or \"Letter\"  </pre> </p>  "
+"</qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:145
+msgid ""
+" <qt>  "
+"<p><b>Paper type:</b> Select paper type to be printed on from  the drop-down "
+"menu. </p> "
+"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed. </p> "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o MediaType=...        # example: \"Transparency\"  </pre> </p>  </qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:158
+msgid ""
+" <qt>  "
+"<p><b>Paper source:</b> Select paper source tray for the paper to be printed on "
+"from the drop-down menu.  "
+"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed. </p> "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
+"</pre> </p>  </qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:171
+msgid ""
+" <qt>  "
+"<p><b>Image Orientation:</b> Orientation of the printed  page image on your "
+"paper is controlled by the radio buttons. By default,  the orientation is <em>"
+"Portrait</em>  "
+"<p>You can select 4 alternatives:  "
+"<ul>  "
+"<li> <b>Portrait.</b>.Portrait is the default setting. </li>  "
+"<li> <b>Landscape.</b> </li>  "
+"<li> <b>Reverse Landscape.</b> Reverse Landscape prints the images upside down. "
+"</li>  "
+"<li> <b>Reverse Portrait.</b> Reverse Portrait prints the image upside "
+"down.</li>  </ul>  The icon changes according to your selection.</p> "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o orientation-requested=...       # examples: \"landscape\" or "
+"\"reverse-portrait\"  </pre> </p>  </qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:192
+msgid ""
+" <qt>  "
+"<p><b>Duplex Printing:</b> These controls may be grayed out if your printer  "
+"does not support <em>duplex printing</em> (i.e. printing on both sides of the "
+"sheet).  These controls are active if your printer supports duplex printing.  "
+"<p>  You can choose from 3 alternatives: </p> "
+"<ul>  "
+"<li> <b>None.</b> This prints each page of the job on one side of the sheets "
+"only. </li>  "
+"<li> <b>Long Side.</b> This prints the job on both sides of the paper sheets.  "
+"It prints the job in a way so that the backside has the same orientation as the "
+"front  side if you turn the paper over the long edge. (Some printer drivers "
+"name this mode  <em>duplex-non-tumbled</em>).  </li>  "
+"<li> <b>Short Side.</b> This prints the job on both sides of the paper sheets.  "
+"It prints the job so that the backside has the reverse orientation from the "
+"front  side if you turn the paper over the long edge, but the same orientation, "
+"if you turn it over  the short edge. (Some printer drivers name this mode  <em>"
+"duplex-tumbled</em>).  </li>  </ul>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
+" </pre> </p>  </qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:218
+msgid ""
+" <qt>  "
+"<p><b>Banner Page(s):</b> Select banner(s) to print one or two special sheets  "
+"of paper just before or after your main job. </p> "
+"<p>Banners may contain some pieces of job information, such as user name, time "
+"of printing, job title and more. </p> "
+"<p>Banner pages are useful to separate different jobs more easily, especially "
+"in a multi-user  environment. </p> "
+"<p><em><b>Hint:</em></b> You can design your own banner pages. To make use of "
+"them, just put the banner  file into the standard CUPS <em>banners</em> "
+"directory (This is usually <em>\"/usr/share/cups/banner/\"</em>  "
+"Your custom banner(s) must have one of the supported printable formats.  "
+"Supported formats are ASCII text, PostScript, PDF and nearly any image format "
+"such as PNG, JPEG or  GIF. Your added banner pages will appear in the drop down "
+"menu after a restart of CUPS. </p> "
+"<p>CUPS comes with a selection of banner pages. </p> "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
+"</pre> </p>  </qt>"
+msgstr ""
+
+#: kpgeneralpage.cpp:240
+msgid ""
+" <qt>  "
+"<p><b>Pages per Sheet:</b>  You can choose to print more than one page onto "
+"each sheet of paper.  This is sometimes useful to save paper. </p> "
+"<p><b>Note 1:</b> the page images get scaled down accordingly to print 2 or 4 "
+"pages per sheet.  The page image does not get scaled if you print 1 page per "
+"sheet (the default setting.).  "
+"<p><b>Note 2:</b> If you select multiple pages per sheet here, the scaling and "
+"re-arranging is done  by your printing system. Be aware, that some printers can "
+"by themselves print multiple pages per sheet.  In this case you find the option "
+"in the printer driver settings. Be careful: if you enable multiple  pages per "
+"sheet in both places, your printout will not look as you intended. </p> "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o number-up=...        # examples: \"2\" or \"4\"  </pre> </p>  </qt>"
+msgstr ""
+
+#: driver.cpp:377 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307
+#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54
+#: management/kmwend.cpp:49
+msgid "General"
+msgstr "Općenito"
+
+#: kpgeneralpage.cpp:264 kpqtpage.cpp:118
+msgid "Page s&ize:"
+msgstr "&Veličina papira:"
+
+#: kpgeneralpage.cpp:268
+msgid "Paper t&ype:"
+msgstr "&Tip papira:"
+
+#: kpgeneralpage.cpp:272
+msgid "Paper so&urce:"
+msgstr "&Izvor papira:"
+
+#: kpgeneralpage.cpp:292
+msgid "Duplex Printing"
+msgstr "Duplex štampanje"
+
+#: kpgeneralpage.cpp:295 kpqtpage.cpp:143
+msgid "Pages per Sheet"
+msgstr "Stranica po listu"
+
+#: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298
+msgid "Banners"
+msgstr "Trake"
+
+#: kpgeneralpage.cpp:301 kpqtpage.cpp:125
+msgid "&Portrait"
+msgstr "&Uspravno"
+
+#: kpgeneralpage.cpp:302 kpqtpage.cpp:128
+msgid "&Landscape"
+msgstr "&Položeno"
+
+#: kpgeneralpage.cpp:303
+msgid "&Reverse landscape"
+msgstr "O&brnuto položeno"
+
+#: kpgeneralpage.cpp:304
+msgid "R&everse portrait"
+msgstr "Ob&rnuto uspravno"
+
+#: kpgeneralpage.cpp:309
+msgid ""
+"_: duplex orientation\n"
+"&None"
+msgstr "&Nema"
+
+#: kpgeneralpage.cpp:310
+msgid ""
+"_: duplex orientation\n"
+"Lon&g side"
+msgstr "&Dužom stranom"
+
+#: kpgeneralpage.cpp:311
+msgid ""
+"_: duplex orientation\n"
+"S&hort side"
+msgstr "&Kraćom stranom"
+
+#: kpgeneralpage.cpp:323
+msgid "S&tart:"
+msgstr "&Početak:"
+
+#: kpgeneralpage.cpp:324
+msgid "En&d:"
+msgstr "&Kraj:"
+
+#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52
+msgid "Disabled"
+msgstr "Isključeno"
+
+#: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50
+msgid "Enabled"
+msgstr "Uključeno"
+
+#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45
+msgid "Margins"
+msgstr "Margine"
+
+#: posterpreview.cpp:115
+#, fuzzy
+msgid ""
+"Poster preview not available. Either the <b>poster</b> "
+"executable is not properly installed, or you don't have the required version"
+msgstr ""
+"Pregled postera nije dostupan. Ili <b>poster</b> izvršna datoteka nije ispravno "
+"instalirana ili nemate odgovarajuću verziju."
+
+#: management/kxmlcommandselector.cpp:54
+msgid "New command"
+msgstr "Nova naredba"
+
+#: management/kxmlcommandselector.cpp:55
+msgid "Edit command"
+msgstr "Izmijeni naredbu"
+
+#: management/kxmlcommandselector.cpp:72
+msgid "&Browse..."
+msgstr "Po&traži..."
+
+#: management/kxmlcommandselector.cpp:73
+msgid "Use co&mmand:"
+msgstr "Koristi &naredbu:"
+
+#: management/kxmlcommandselector.cpp:174
+msgid "Command Name"
+msgstr "Ime naredbe"
+
+#: management/kxmlcommandselector.cpp:174
+msgid "Enter an identification name for the new command:"
+msgstr "Unesite identifikaciono ime za novu naredbu:"
+
+#: management/kxmlcommandselector.cpp:183
+msgid ""
+"A command named %1 already exists. Do you want to continue and edit the "
+"existing one?"
+msgstr ""
+"Naredba pod imenom %1 već postoji. Želite li nastaviti i izmijeniti postojeću?"
+
+#: management/kxmlcommandselector.cpp:220
+msgid "Internal error. The XML driver for the command %1 could not be found."
+msgstr "Interna greška. Nisam pronašao XML drajver za naredbu %1."
+
+#: management/kxmlcommandselector.cpp:238
+msgid "output"
+msgstr "izlaz"
+
+#: management/kxmlcommandselector.cpp:242
+msgid "undefined"
+msgstr "neodređeno"
+
+#: management/kxmlcommandselector.cpp:247
+msgid "not allowed"
+msgstr "nije dozvoljeno"
+
+#: management/kxmlcommandselector.cpp:253
+msgid "(Unavailable: requirements not satisfied)"
+msgstr "(Nedostupno: nisu zadovoljeni zahtjevi)"
+
+#: management/kmwsmb.cpp:35
+msgid "SMB Printer Settings"
+msgstr "Postavke SMB štampača"
+
+#: management/kmwsmb.cpp:41
+msgid "Scan"
+msgstr "Pretraga"
+
+#: management/kmwsmb.cpp:42
+msgid "Abort"
+msgstr "Prekini"
+
+#: management/kmwsmb.cpp:44
+msgid "Workgroup:"
+msgstr "Radna grupa:"
+
+#: management/kmwsmb.cpp:45
+msgid "Server:"
+msgstr "Server:"
+
+#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99
+msgid "Printer:"
+msgstr "Štampač:"
+
+#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79
+msgid "Empty server name."
+msgstr "Prazno ime servera."
+
+#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45
+msgid "Empty printer name."
+msgstr "Prazno ime štampača."
+
+#: management/kmwsmb.cpp:99
+#, c-format
+msgid "Login: %1"
+msgstr "Login: %1"
+
+#: management/kmwsmb.cpp:99
+msgid "<anonymous>"
+msgstr "<anonymous>"
+
+#: management/kmwdriver.cpp:33
+msgid "Printer Model Selection"
+msgstr "Izbor modela štampača"
+
+#: management/kmwdriver.cpp:80 management/kmwend.cpp:106
+#: management/kmwname.cpp:83
+msgid "Raw printer"
+msgstr "Sirovi štampač"
+
+#: management/kmwdriver.cpp:113
+msgid "Internal error: unable to locate the driver."
+msgstr "Interna greška: ne mogu pronaći drajver."
+
+#: management/kmconfigdialog.cpp:38
+msgid "TDE Print Configuration"
+msgstr "Postavke TDE štampe"
+
+#: management/kmwizard.cpp:64 management/kmwizard.cpp:209
+msgid "&Next >"
+msgstr "&Sljedeći >>"
+
+#: management/kmwizard.cpp:66
+msgid "< &Back"
+msgstr "< &Nazad"
+
+#: management/kmwizard.cpp:131 management/kmwizard.cpp:166
+#: management/kmwizard.cpp:191
+msgid "Add Printer Wizard"
+msgstr "Čarobnjak za dodavanje štampača"
+
+#: management/kmwizard.cpp:166
+msgid "Modify Printer"
+msgstr "Izmijeni štampač"
+
+#: management/kmwizard.cpp:191
+msgid "Unable to find the requested page."
+msgstr "Ne mogu pronaći traženu stranicu."
+
+#: management/kmwizard.cpp:207 management/kmwizard.cpp:234
+msgid "&Finish"
+msgstr "&Završi"
+
+#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338
+msgid "&Subnetwork:"
+msgstr "Pod&mreža"
+
+#: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53
+#: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35
+msgid "&Port:"
+msgstr "&Port:"
+
+#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340
+msgid "&Timeout (ms):"
+msgstr "&Vrijeme čekanja (ms)"
+
+#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378
+msgid "Scan Configuration"
+msgstr "Postavke pretrage"
+
+#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110
+#: management/networkscanner.cpp:390 management/networkscanner.cpp:396
+msgid "Wrong subnetwork specification."
+msgstr "Navedena je neispravna podmreža."
+
+#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404
+msgid "Wrong timeout specification."
+msgstr "Dato je pogrešno vrijeme čekanja."
+
+#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407
+msgid "Wrong port specification."
+msgstr "Dat je pogrešan port."
+
+#: management/tdeprint_management_module.cpp:48
+msgid "Select Command"
+msgstr "Izaberite naredbu"
+
+#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38
+msgid ""
+"_: Physical Location\n"
+"Location:"
+msgstr "Lokacija:"
+
+#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39
+#: management/kmwname.cpp:41
+msgid "Description:"
+msgstr "Opis:"
+
+#: kprintdialog.cpp:282 management/kminfopage.cpp:48
+msgid "Type:"
+msgstr "Vrsta:"
+
+#: kprintdialog.cpp:280 management/kminfopage.cpp:50
+msgid ""
+"_: Status\n"
+"State:"
+msgstr "Status:"
+
+#: cups/kmwother.cpp:51 management/kminfopage.cpp:52
+#: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54
+msgid "URI:"
+msgstr "URI:"
+
+#: management/kminfopage.cpp:54 management/kminfopage.cpp:93
+#: tools/escputil/escpwidget.cpp:101
+msgid "Device:"
+msgstr "Uređaj:"
+
+#: management/kminfopage.cpp:56
+msgid "Model:"
+msgstr "Model:"
+
+#: management/kminfopage.cpp:92
+msgid "Members:"
+msgstr "Članovi:"
+
+#: management/kminfopage.cpp:112
+msgid "Implicit class"
+msgstr "Implicitna klasa"
+
+#: management/kminfopage.cpp:114
+msgid "Remote class"
+msgstr "Udaljena klasa"
+
+#: management/kminfopage.cpp:115
+msgid "Local class"
+msgstr "Lokalna klasa"
+
+#: management/kminfopage.cpp:117
+msgid "Remote printer"
+msgstr "Udaljeni štampač"
+
+#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274
+#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342
+#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118
+msgid "Local printer"
+msgstr "Lokalni štampač"
+
+#: management/kminfopage.cpp:120
+msgid "Special (pseudo) printer"
+msgstr "Posebni (pseudo) štampač"
+
+#: management/kminfopage.cpp:121
+msgid ""
+"_: Unknown class of printer\n"
+"Unknown"
+msgstr "Nepoznato"
+
+#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59
+msgid "Jobs"
+msgstr "Zadaci"
+
+#: management/kmpages.cpp:69
+msgid "Instances"
+msgstr "Instance"
+
+#: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90
+#: management/smbview.cpp:43
+msgid "Printer"
+msgstr "Štampač"
+
+#: management/smbview.cpp:44
+msgid "Comment"
+msgstr "Komentar"
+
+#: management/kmdbcreator.cpp:92
+msgid ""
+"No executable defined for the creation of the driver database. This operation "
+"is not implemented."
+msgstr ""
+"Nije definisana izvršna datoteka za pravljenje baze drajvera. Ova operacija "
+"nije implementirana."
+
+#: management/kmdbcreator.cpp:95
+msgid ""
+"The executable %1 could not be found in your PATH. Check that this program "
+"exists and is accessible in your PATH variable."
+msgstr ""
+"Ne mogu naći izvršnu datoteku %1 u vašem PATHu. Provjerite da li ovaj program "
+"postoji i da li je dostupan u vašoj PATH promjenljivoj."
+
+#: management/kmdbcreator.cpp:99
+msgid ""
+"Unable to start the creation of the driver database. The execution of %1 "
+"failed."
+msgstr "Ne mogu pokrenuti pravljenje baze drajvera. Izvršenje %1 nije uspjelo."
+
+#: management/kmdbcreator.cpp:113
+msgid "Please wait while TDE rebuilds a driver database."
+msgstr "Molimo sačekajte dok TDE izgradi bazu drajvera."
+
+#: management/kmdbcreator.cpp:114
+msgid "Driver Database"
+msgstr "Baza drajvera"
+
+#: management/kmdbcreator.cpp:171
+msgid ""
+"Error while creating driver database: abnormal child-process termination."
+msgstr ""
+"Greška prilikom pravljenja baze drajvera: nenormalan prekid procesa-djeteta."
+
+#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699
+msgid "Print Job Settings"
+msgstr "Postavke zadataka štampe"
+
+#: management/kmconfigjobs.cpp:37
+msgid "Jobs Shown"
+msgstr "Prikazani zadaci"
+
+#: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:170
+#: management/kmjobviewer.cpp:336
+msgid "Unlimited"
+msgstr "Neograničeno"
+
+#: management/kmconfigjobs.cpp:42
+msgid "Maximum number of jobs shown:"
+msgstr "Maksimalan broj prikazanih zadataka:"
+
+#: management/kmpropgeneral.cpp:37
+msgid "Printer name:"
+msgstr "Ime štampača:"
+
+#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55
+msgid "General Settings"
+msgstr "Opće postavke"
+
+#: management/kmwpassword.cpp:37
+msgid "User Identification"
+msgstr "Identifikacija korisnika"
+
+#: management/kmwpassword.cpp:43
+msgid ""
+"<p>This backend may require a login/password to work properly. Select the type "
+"of access to use and fill in the login and password entries if needed.</p>"
+msgstr ""
+"<p>Ovaj backend može zahtijevati login/šifru da bi ispravno radio. Izaberite "
+"vrstu pristupa koju ćete koristiti i popunite polja za login i šifru ako je "
+"potrebno.</p>"
+
+#: management/kmwpassword.cpp:49
+msgid "&Login:"
+msgstr "&Login:"
+
+#: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50
+msgid "&Password:"
+msgstr "Ši&fra:"
+
+#: management/kmwpassword.cpp:53
+msgid "&Anonymous (no login/password)"
+msgstr "&Anonimno (bez logina/šifre)"
+
+#: management/kmwpassword.cpp:54
+msgid "&Guest account (login=\"guest\")"
+msgstr "&Gostujući račun (login=\"guest\")"
+
+#: management/kmwpassword.cpp:55
+msgid "Nor&mal account"
+msgstr "O&bičan račun"
+
+#: management/kmwpassword.cpp:88
+msgid "Select one option"
+msgstr "Izaberite neku opciju"
+
+#: management/kmwpassword.cpp:90
+msgid "User name is empty."
+msgstr "Mjesto za korisničko ime je prazno."
+
+#: management/kmwdrivertest.cpp:41
+msgid "Printer Test"
+msgstr "Test štampača"
+
+#: management/kmwdrivertest.cpp:51
+msgid "<b>Manufacturer:</b>"
+msgstr "<b>Proizvođač:</b>"
+
+#: management/kmwdrivertest.cpp:52
+msgid "<b>Model:</b>"
+msgstr "<b>Model:</b>"
+
+#: management/kmwdrivertest.cpp:53
+msgid "<b>Description:</b>"
+msgstr "<b>Opis:</b<"
+
+#: management/kmwdrivertest.cpp:55
+msgid "&Test"
+msgstr "&Test"
+
+#: management/kmwdrivertest.cpp:59
+msgid ""
+"<p>Now you can test the printer before finishing installation. Use the <b>"
+"Settings</b> button to configure the printer driver and the <b>Test</b> "
+"button to test your configuration. Use the <b>Back</b> "
+"button to change the driver (your current configuration will be discarded).</p>"
+msgstr ""
+"<p>Sada možete testirati štampač prije završetka instalacije. Koristite dugme "
+"<b>Postavke</b> da biste podesili drajver štampača, a dugme <b>Test</b> "
+"da biste isprobali vašu konfiguraciju. Koristite dugme <b>Nazad</b> "
+"da promijenite drajver (vaša trenutna konfiguracija će biti odbačena).</p>"
+
+#: management/kmwdrivertest.cpp:117
+msgid "<qt>Unable to load the requested driver:<p>%1</p></qt>"
+msgstr "<qt>Ne mogu učitati traženi drajver:<p>%1</p></qt>"
+
+#: management/kmwdrivertest.cpp:146
+msgid ""
+"Test page successfully sent to printer. Wait until printing is complete, then "
+"click the OK button."
+msgstr ""
+"Testna stranica je uspješno poslana štampaču. Sačekajte dok se štampanje "
+"završi, a zatim kliknite na dugme OK."
+
+#: management/kmwdrivertest.cpp:148
+msgid "Unable to test printer: "
+msgstr "Ne mogu testirati štampač:"
+
+#: management/kmwdrivertest.cpp:150
+msgid "Unable to remove temporary printer."
+msgstr "Ne mogu obrisati privremeni štampač."
+
+#: management/kmwdrivertest.cpp:153
+msgid "Unable to create temporary printer."
+msgstr "Ne mogu napraviti privremeni štampač."
+
+#: management/kmwbackend.cpp:54
+msgid "Backend Selection"
+msgstr "Izbor backend-a"
+
+#: management/kmwbackend.cpp:68
+msgid "You must select a backend."
+msgstr "Morate izabrati backend."
+
+#: management/kmwbackend.cpp:115
+msgid "&Local printer (parallel, serial, USB)"
+msgstr "&Lokalni štampač (paralelni, serijski, USB)"
+
+#: management/kmwbackend.cpp:116
+msgid ""
+"<qt>"
+"<p>Locally-connected printer</p>"
+"<p>Use this for a printer connected to the computer via a parallel, serial or "
+"USB port.</p></qt>"
+msgstr ""
+"<qt>"
+"<p>Lokalno spojen štampač</p>"
+"<p>Koristite ovo za štampač spojen na računar putem paralelnog, serijskog ili "
+"USB porta.</p></qt>"
+
+#: management/kmwbackend.cpp:122
+msgid "&SMB shared printer (Windows)"
+msgstr "&SMB dijeljeni štampač (Windows)"
+
+#: management/kmwbackend.cpp:123
+msgid ""
+"<qt>"
+"<p>Shared Windows printer</p>"
+"<p>Use this for a printer installed on a Windows server and shared on the "
+"network using the SMB protocol (samba).</p></qt>"
+msgstr ""
+"<qt>"
+"<p>Dijeljeni Windows štampač</p>"
+"<p>Koristite ovo za štampač instaliran na Windows serveru i dijeljen na mreži "
+"korištenjem SMB protokola (samba).</p></qt>"
+
+#: management/kmwbackend.cpp:130
+msgid "&Remote LPD queue"
+msgstr "&Udaljeni LPD red"
+
+#: management/kmwbackend.cpp:131
+msgid ""
+"<qt>"
+"<p>Print queue on a remote LPD server</p>"
+"<p>Use this for a print queue existing on a remote machine running a LPD print "
+"server.</p></qt>"
+msgstr ""
+"<qt>"
+"<p>Red štampe na udaljenom LPD serveru</p>"
+"<p>Koristite ovo za red štampe koji se nalazi na udaljenoj mašini na kojoj se "
+"izvršava LPD server štampe.</p></qt>"
+
+#: management/kmwbackend.cpp:137
+msgid "Ne&twork printer (TCP)"
+msgstr "M&režni štampač (TCP)"
+
+#: management/kmwbackend.cpp:138
+msgid ""
+"<qt>"
+"<p>Network TCP printer</p>"
+"<p>Use this for a network-enabled printer using TCP (usually on port 9100) as "
+"communication protocol. Most network printers can use this mode.</p></qt>"
+msgstr ""
+"<qt>"
+"<p>Mrežni TCP štampač</p>"
+"<p>Koristite ovo za mrežni štampač koji koristi TCP kao svoj komunikacioni "
+"protokol (obično na portu 9100). Većina mrežnih štampača može koristiti ovaj "
+"režim.</p></qt>"
+
+#: management/kmwfile.cpp:35
+msgid "File Selection"
+msgstr "Odabir datoteke"
+
+#: management/kmwfile.cpp:41
+msgid ""
+"<p>The printing will be redirected to a file. Enter here the path of the file "
+"you want to use for redirection. Use an absolute path or the browse button for "
+"graphical selection.</p>"
+msgstr ""
+"<p>Štampanje će biti preusmjereno u datoteku. Ovdje unesite put do datoteke "
+"koju želite koristiti za preusmjerenje. Koristite apsolutni put ili dugme "
+"\"Potraži\" za grafički izbor.</p>"
+
+#: management/kmwfile.cpp:44
+msgid "Print to file:"
+msgstr "Štampaj u datoteku:"
+
+#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60
+msgid "Empty file name."
+msgstr "Prazan prostor za ime datoteke."
+
+#: management/kmwfile.cpp:66
+msgid "Directory does not exist."
+msgstr "Direktorij ne postoji."
+
+#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107
+msgid "String"
+msgstr "Tekst"
+
+#: management/kxmlcommanddlg.cpp:108
+msgid "Integer"
+msgstr "Cijeli broj"
+
+#: management/kxmlcommanddlg.cpp:109
+msgid "Float"
+msgstr "Decimalan broj"
+
+#: management/kxmlcommanddlg.cpp:110
+msgid "List"
+msgstr "Lista"
+
+#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111
+msgid "Boolean"
+msgstr "Booleov izraz"
+
+#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56
+#: management/kxmlcommanddlg.cpp:114
+msgid "&Name:"
+msgstr "&Ime:"
+
+#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115
+#: management/kxmlcommanddlg.cpp:866
+msgid "&Description:"
+msgstr "&Opis:"
+
+#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116
+msgid "&Format:"
+msgstr "&Format:"
+
+#: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117
+msgid "&Type:"
+msgstr "&Vrsta:"
+
+#: management/kxmlcommanddlg.cpp:118
+msgid "Default &value:"
+msgstr "Podrazumjevana &vrijednost:"
+
+#: management/kxmlcommanddlg.cpp:119
+msgid "Co&mmand:"
+msgstr "Na&redba:"
+
+#: management/kxmlcommanddlg.cpp:126
+msgid "&Persistent option"
+msgstr "&Trajna opcija"
+
+#: management/kxmlcommanddlg.cpp:128
+msgid "Va&lues"
+msgstr "Vri&jednosti"
+
+#: management/kxmlcommanddlg.cpp:136
+msgid "Minimum v&alue:"
+msgstr "Minimalna v&rijednost:"
+
+#: management/kxmlcommanddlg.cpp:137
+msgid "Ma&ximum value:"
+msgstr "Ma&ksimalna vrijednost:"
+
+#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237
+#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141
+#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101
+msgid "Name"
+msgstr "Ime i prezime"
+
+#: management/kmwend.cpp:53 management/kmwend.cpp:112
+#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545
+msgid "Description"
+msgstr "Opis"
+
+#: management/kxmlcommanddlg.cpp:150
+msgid "Add value"
+msgstr "Dodaj vrijednost"
+
+#: management/kxmlcommanddlg.cpp:151
+msgid "Delete value"
+msgstr "Pobriši vrijednost"
+
+#: management/kxmlcommanddlg.cpp:153
+msgid "Apply changes"
+msgstr "Primijeni promjene"
+
+#: management/kxmlcommanddlg.cpp:154
+msgid "Add group"
+msgstr "Dodaj grupu"
+
+#: management/kxmlcommanddlg.cpp:155
+msgid "Add option"
+msgstr "Dodaj opciju"
+
+#: management/kxmlcommanddlg.cpp:156
+msgid "Delete item"
+msgstr "Obriši stavku"
+
+#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135
+msgid "Move up"
+msgstr "Pomakni gore"
+
+#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142
+msgid "Move down"
+msgstr "Pomakni dole"
+
+#: management/kxmlcommanddlg.cpp:162
+msgid "&Input From"
+msgstr "&Ulaz iz"
+
+#: management/kxmlcommanddlg.cpp:163
+msgid "O&utput To"
+msgstr "&Izlaz u"
+
+#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166
+msgid "File:"
+msgstr "Datoteka:"
+
+#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167
+msgid "Pipe:"
+msgstr "Pipa:"
+
+#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176
+msgid "Comment:"
+msgstr "Komentar:"
+
+#: management/kxmlcommanddlg.cpp:285
+msgid ""
+"An identification string. Use only alphanumeric characters except spaces. The "
+"string <b>__root__</b> is reserved for internal use."
+msgstr ""
+"Identifikacioni string. Koristite samo alfanumeričke znakove osim razmaka. "
+"String <b>__root__</b> je rezervisan za internu upotrebu."
+
+#: management/kxmlcommanddlg.cpp:289
+msgid ""
+"A description string. This string is shown in the interface, and should be "
+"explicit enough about the role of the corresponding option."
+msgstr ""
+"Opisni string. Ovaj string će biti prikazan u interfejsu i treba dovoljno dobro "
+"opisati ulogu odgovarajuće opcije."
+
+#: management/kxmlcommanddlg.cpp:293
+msgid ""
+"The type of the option. This determines how the option is presented graphically "
+"to the user."
+msgstr ""
+"Vrsta opcije. Ovo određuje kako će opcija biti grafički prezentirana korisniku."
+
+#: management/kxmlcommanddlg.cpp:297
+msgid ""
+"The format of the option. This determines how the option is formatted for "
+"inclusion in the global command line. The tag <b>%value</b> "
+"can be used to represent the user selection. This tag will be replaced at "
+"run-time by a string representation of the option value."
+msgstr ""
+"Format opcije. Ovo određuje kako je opcija formatirana za uključivanje u "
+"globalnu komandnu liniju. Tag <b>%value</b> se može koristi za predstavljanje "
+"korisničkog izbora. Ovaj tag će prilikom izvršavanja biti zamijenjen znakovnom "
+"reprezentacijom vrijednosti opcije."
+
+#: management/kxmlcommanddlg.cpp:303
+msgid ""
+"The default value of the option. For non persistent options, nothing is added "
+"to the command line if the option has that default value. If this value does "
+"not correspond to the actual default value of the underlying utility, make the "
+"option persistent to avoid unwanted effects."
+msgstr ""
+"Podrazumijevana vrijednost za opciju. Za ne-trajne opcije, ništa nije dodato u "
+"komandnu liniju ako opcija ima podrazumijevanu vrijednost. Ako ova vrijednost "
+"ne odražava stvarnu podrazumijevanu vrijednost odgovarajućeg alata, načinite "
+"ovu opciju trajnom da biste izbjegli neželjene efekte."
+
+#: management/kxmlcommanddlg.cpp:309
+msgid ""
+"Make the option persistent. A persistent option is always written to the "
+"command line, whatever its value. This is useful when the chosen default value "
+"does not match with the actual default value of the underlying utility."
+msgstr ""
+"Učini opciju trajnom. Trajna opcija je uvijek upisana u komandnu liniju, bez "
+"obzira kakva joj je vrijednost. Ovo je korisno kada se odabrana podrazumijevana "
+"vrijednost ne poklapa sa podrazumijevanom vrijednošću odgovarajućeg alata."
+
+#: management/kxmlcommanddlg.cpp:313
+#, c-format
+msgid ""
+"The full command line to execute the associated underlying utility. This "
+"command line is based on a mechanism of tags that are replaced at run-time. The "
+"supported tags are:"
+"<ul>"
+"<li><b>%filterargs</b>: command options</li>"
+"<li><b>%filterinput</b>: input specification</li>"
+"<li><b>%filteroutput</b>: output specification</li>"
+"<li><b>%psu</b>: the page size in upper case</li>"
+"<li><b>%psl</b>: the page size in lower case</li></ul>"
+msgstr ""
+"Puna komandna linija za izvršavanje pridruženog alata. Ova komandna linija je "
+"bazirana na mehanizmu tagova koju se zamijenjuju za vrijeme izvršavanja. "
+"Podržani tagovi su: "
+"<ul>"
+"<li><b>%filterargs</b>: komandne opcije</li>"
+"<li><b>%filterinput</b>: ulazna specifikacija</li>"
+"<li><b>%filteroutput</b>: izlazna specifikacija</li>"
+"<li><b>%psu</b>: veličina stranice sa velikim slovima</li>"
+"<li><b>%psl</b>: veličina stranice sa malim slovima</li></ul>"
+
+#: management/kxmlcommanddlg.cpp:323
+#, c-format
+msgid ""
+"Input specification when the underlying utility reads input data from a file. "
+"Use the tag <b>%in</b> to represent the input filename."
+msgstr ""
+"Ulazna specifikacija kada odgovarajući alat čita ulazne podatke iz datoteke. "
+"Koristite tag <b>%in</b> za oznaku imena datoteke."
+
+#: management/kxmlcommanddlg.cpp:327
+#, c-format
+msgid ""
+"Output specification when the underlying utility writes output data to a file. "
+"Use the tag <b>%out</b> to represent the output filename."
+msgstr ""
+"Izlazna specifikacija kada odgovarajući alat ispisuje izlazne podatke u "
+"datoteke. Koristite tag <b>%out</b> za oznaku imena datoteke."
+
+#: management/kxmlcommanddlg.cpp:331
+msgid ""
+"Input specification when the underlying utility reads input data from its "
+"standard input."
+msgstr ""
+"Ulazna specifikacija kada odgovarajući alat čita ulazne podatke sa svog "
+"standardnog ulaza."
+
+#: management/kxmlcommanddlg.cpp:335
+msgid ""
+"Output specification when the underlying utility writes output data to its "
+"standard output."
+msgstr ""
+"Izlazna specifikacija kada odgovarajući alat čita ulazne podatke sa svog "
+"standardnog ulaza."
+
+#: management/kxmlcommanddlg.cpp:339
+msgid ""
+"A comment about the underlying utility, which can be viewed by the user from "
+"the interface. This comment string supports basic HTML tags like &lt;a&gt;, "
+"&lt;b&gt; or &lt;i&gt;."
+msgstr ""
+"Komentar o odgovarajućem alatu, koji korisnik može vidjeti iz interfejsa. Ovaj "
+"komentarski string podržava osnovne HTML tagove kao &lt;a&gt;, &lt;b&gt; ili "
+"&lt;i&gt;."
+
+#: management/kxmlcommanddlg.cpp:568
+msgid ""
+"Invalid identification name. Empty strings and \"__root__\" are not allowed."
+msgstr ""
+"Neispravno ime za identifikaciju. Prazni stringovi i \"__root__\" nisu "
+"dozvoljeni."
+
+#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652
+msgid "New Group"
+msgstr "Nova grupa"
+
+#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671
+msgid "New Option"
+msgstr "Nova opcija"
+
+#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939
+#, c-format
+msgid "Command Edit for %1"
+msgstr "Izmjena naredbe za %1"
+
+#: management/kxmlcommanddlg.cpp:833
+msgid "&Mime Type Settings"
+msgstr "Postavke &MIME tipa"
+
+#: management/kxmlcommanddlg.cpp:839
+msgid "Supported &Input Formats"
+msgstr "Podržani formati &ulaza"
+
+#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840
+msgid "Requirements"
+msgstr "Zahtjevi"
+
+#: management/kxmlcommanddlg.cpp:851
+msgid "&Edit Command..."
+msgstr "&Izmijeni naredbu..."
+
+#: management/kxmlcommanddlg.cpp:868
+msgid "Output &format:"
+msgstr "&Format izlaza:"
+
+#: management/kxmlcommanddlg.cpp:870
+msgid "ID name:"
+msgstr "ID ime:"
+
+#: management/kxmlcommanddlg.cpp:1033
+msgid "exec:/"
+msgstr "exec:/"
+
+#: management/kmdriverdbwidget.cpp:51
+msgid "&PostScript printer"
+msgstr "&PostScript štampač"
+
+#: management/kmdriverdbwidget.cpp:52
+msgid "&Raw printer (no driver needed)"
+msgstr "&Sirova štampa (nije potreban drajver)"
+
+#: management/kmdriverdbwidget.cpp:55
+msgid "&Other..."
+msgstr "&Ostalo..."
+
+#: management/kmdriverdbwidget.cpp:56
+msgid "&Manufacturer:"
+msgstr "&Proizvođač:"
+
+#: management/kmdriverdbwidget.cpp:57
+msgid "Mo&del:"
+msgstr "Mo&del:"
+
+#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166
+msgid "Loading..."
+msgstr "Otvaram..."
+
+#: management/kmdriverdbwidget.cpp:217
+msgid "Unable to find the PostScript driver."
+msgstr "Ne mogu pronaći PostScript drajver."
+
+#: management/kmdriverdbwidget.cpp:230
+msgid "Select Driver"
+msgstr "Izaberite drajver"
+
+#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249
+msgid "<Unknown>"
+msgstr "<Nepoznat>"
+
+#: management/kmdriverdbwidget.cpp:252
+msgid "Database"
+msgstr "Baza podataka"
+
+#: management/kmdriverdbwidget.cpp:259
+msgid "Wrong driver format."
+msgstr "Pogrešan format drajvera"
+
+#: management/kmdriverdbwidget.cpp:268
+msgid "Other"
+msgstr "Ostalo"
+
+#: management/kmwinfopage.cpp:32
+msgid "Introduction"
+msgstr "Uvod"
+
+#: management/kmwinfopage.cpp:37
+#, fuzzy
+msgid ""
+"<p>Welcome,</p>"
+"<br>"
+"<p>This wizard will help to install a new printer on your computer. It will "
+"guide you through the various steps of the process of installing and "
+"configuring a printer for your printing system. At each step, you can always go "
+"back using the <b>Back</b> button.</p>"
+"<br>"
+"<p>We hope you enjoy this tool!</p>"
+"<br>"
+msgstr ""
+"<p>Dobro došli,</p>"
+"<br>"
+"<p>Ovaj čarobnjak će vam pomoći da instalirate novi štampač na vaš računar. On "
+"će vas voditi kroz razne korake procesa instalacije i podešavanja štampača za "
+"vaš sistem štampe. Na svakom koraku, uvijek možete ići nazad koristeći dugme <b>"
+"Nazad</b>.</p>"
+"<br>"
+"<p>Nadamo se da ćete uživati u ovom alatu !</p>"
+"<br><p align=right><i>TDE printing team.</i></p>"
+
+#: management/kmlistview.cpp:125
+msgid "Print System"
+msgstr "Sistem štampe"
+
+#: management/kmlistview.cpp:128
+msgid "Classes"
+msgstr "Razredi"
+
+#: management/kmlistview.cpp:131
+msgid "Printers"
+msgstr "Štampači"
+
+#: management/kmlistview.cpp:134
+msgid "Specials"
+msgstr "Posebno"
+
+#: management/kmwlocal.cpp:38
+msgid "Local Port Selection"
+msgstr "Odabir lokalnog porta"
+
+#: management/kmwlocal.cpp:50
+msgid "Local System"
+msgstr "Lokalni sistem"
+
+#: management/kmwlocal.cpp:57
+msgid "Parallel"
+msgstr "Paralelni"
+
+#: management/kmwlocal.cpp:58
+msgid "Serial"
+msgstr "Serijski"
+
+#: management/kmwlocal.cpp:59
+msgid "USB"
+msgstr "USB"
+
+#: driver.cpp:389 management/kmwlocal.cpp:60
+msgid "Others"
+msgstr "Ostali"
+
+#: management/kmwlocal.cpp:63
+msgid ""
+"<p>Select a valid detected port, or enter directly the corresponding URI in the "
+"bottom edit field.</p>"
+msgstr ""
+"<p>Izaberite ispravan port među otkrivenim portovima ili direktno unesite "
+"odgovarajući URI u donje tekstualno polje.</p>"
+
+#: management/kmwlocal.cpp:78
+#, fuzzy
+msgid ""
+"_: The URI is empty\n"
+"Empty URI."
+msgstr ""
+"_: URI je razan\n"
+"Prazan URI."
+
+#: management/kmwlocal.cpp:83
+msgid "The local URI doesn't correspond to a detected port. Continue?"
+msgstr "Lokalni URI ne odgovara otkrivenom portu. Da nastavim?"
+
+#: management/kmwlocal.cpp:85
+msgid "Select a valid port."
+msgstr "Odaberite važeći port."
+
+#: management/kmwlocal.cpp:166
+msgid "Unable to detect local ports."
+msgstr "Ne mogu detektovati lokalne portove."
+
+#: management/kmconfigcommand.cpp:33
+msgid "Commands"
+msgstr "Naredbe"
+
+#: management/kmconfigcommand.cpp:34
+msgid "Command Settings"
+msgstr "Postavke naredbe"
+
+#: management/kmconfigcommand.cpp:37
+msgid "Edit/Create Commands"
+msgstr "Izmijeni/napravi naredbe"
+
+#: management/kmconfigcommand.cpp:39
+msgid ""
+"<p>Command objects perform a conversion from input to output."
+"<br>They are used as the basis to build both print filters and special "
+"printers. They are described by a command string, a set of options, a set of "
+"requirements and associated mime types. Here you can create new command objects "
+"and edit existing ones. All changes will only be effective for you."
+msgstr ""
+"<p>Naredbeni objekti vrše pretvorbu ulaza u izlaz."
+"<br>Oni se koriste i kao osnova za izgradnju filtera štampe i za posebne "
+"štampače. Oni se opisuju naredbenim stringom, skupom opcija, skupom zahtjeva i "
+"pridruženim MIME tipovima. Ovdje možete napraviti nove naredbene objekte ili "
+"izmijeniti postojeće. Sve promjene će se odnositi samo na vas."
+
+#: management/kmwclass.cpp:37
+msgid "Class Composition"
+msgstr "Kreiranje razreda"
+
+#: management/kmwclass.cpp:52
+msgid "Available printers:"
+msgstr "Dostupni štampači:"
+
+#: management/kmwclass.cpp:53
+msgid "Class printers:"
+msgstr "Štampači klase:"
+
+#: management/kmwclass.cpp:79
+msgid "You must select at least one printer."
+msgstr "Morate izabrati bar jedan štampač."
+
+#: management/kmconfigfilter.cpp:40
+msgid "Filter"
+msgstr "Filter"
+
+#: management/kmconfigfilter.cpp:41
+msgid "Printer Filtering Settings"
+msgstr "Postavke filtriranja štampača"
+
+#: management/kmconfigfilter.cpp:44
+msgid "Printer Filter"
+msgstr "Filter štampača"
+
+#: management/kmconfigfilter.cpp:56
+msgid ""
+"The printer filtering allows you to view only a specific set of printers "
+"instead of all of them. This may be useful when there are a lot of printers "
+"available but you only use a few ones. Select the printers you want to see from "
+"the list on the left or enter a <b>Location</b> filter (ex: Group_1*). Both are "
+"cumulative and ignored if empty."
+msgstr ""
+"Filtriranje štampača vam omogućuje da vidite samo određeni skup štampača "
+"umjesto sve. Ovo može biti korisno ako imate na raspolaganju mnogo štampača, od "
+"kojih koristite samo neke. Izaberite štampače koje želite vidjeti sa liste "
+"lijevo ili unesite <b>Filter lokacije</b> (npr: Group_1*). Oba su kumulativna i "
+"biće ignorisani ako su prazni."
+
+#: management/kmconfigfilter.cpp:62
+msgid "Location filter:"
+msgstr "Filter lokacije:"
+
+#: management/kmmainview.cpp:72
+msgid ""
+"The printer %1 already exists. Continuing will overwrite existing printer. Do "
+"you want to continue?"
+msgstr ""
+"Štampač %1 već postoji. Nastavak će prepisati postojeći štampač. Želite li "
+"nastaviti ?"
+
+#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
+#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
+msgid "Initializing manager..."
+msgstr "Inicijalizujem upravitelj..."
+
+#: management/kmmainview.cpp:180
+msgid "&Icons,&List,&Tree"
+msgstr "&Ikone,&Liste,&Stablo"
+
+#: management/kmmainview.cpp:184
+msgid "Start/Stop Printer"
+msgstr "Počni/prekini štampu"
+
+#: management/kmmainview.cpp:186
+msgid "&Start Printer"
+msgstr "&Počni štampu"
+
+#: management/kmmainview.cpp:187
+msgid "Sto&p Printer"
+msgstr "&Prekini štampu"
+
+#: management/kmmainview.cpp:189
+msgid "Enable/Disable Job Spooling"
+msgstr "Uključi/isključi spooliranje zadataka"
+
+#: management/kmmainview.cpp:191
+msgid "&Enable Job Spooling"
+msgstr "&Uključi spooliranje zadataka"
+
+#: management/kmmainview.cpp:192
+msgid "&Disable Job Spooling"
+msgstr "&Isključi spooliranje zadataka"
+
+#: management/kmmainview.cpp:195
+msgid "&Configure..."
+msgstr "&Podesi..."
+
+#: management/kmmainview.cpp:196
+msgid "Add &Printer/Class..."
+msgstr "Dodaj &štampač/razred..."
+
+#: management/kmmainview.cpp:197
+msgid "Add &Special (pseudo) Printer..."
+msgstr "Dodaj &poseban (pseudo) štampač..."
+
+#: management/kmmainview.cpp:198
+msgid "Set as &Local Default"
+msgstr "Postavi kao &lokalni podrazumjevani"
+
+#: management/kmmainview.cpp:199
+msgid "Set as &User Default"
+msgstr "Postavi kao &korisnički podrazumjevani"
+
+#: management/kmmainview.cpp:200
+msgid "&Test Printer..."
+msgstr "&Testiraj štampač..."
+
+#: management/kmmainview.cpp:201
+msgid "Configure &Manager..."
+msgstr "Podesi &menadžer..."
+
+#: management/kmmainview.cpp:202
+msgid "Initialize Manager/&View"
+msgstr "Inicijalizuj upravitelj/&Pogledaj"
+
+#: management/kmmainview.cpp:204
+msgid "&Orientation"
+msgstr "U&smjerenje"
+
+#: management/kmmainview.cpp:207
+msgid "&Vertical,&Horizontal"
+msgstr "&Uspravno, &Vodoravno"
+
+#: management/kmmainview.cpp:211
+msgid "R&estart Server"
+msgstr "R&estartaj server"
+
+#: management/kmmainview.cpp:212
+msgid "Configure &Server..."
+msgstr "Podesi &server..."
+
+#: management/kmmainview.cpp:213
+#, fuzzy
+msgid "Configure Server Access..."
+msgstr "Podesi &server..."
+
+#: management/kmmainview.cpp:216
+msgid "Hide &Toolbar"
+msgstr "Sakrij &traku alata"
+
+#: management/kmmainview.cpp:218
+msgid "Show Me&nu Toolbar"
+msgstr "Prikaži me&nije"
+
+#: management/kmmainview.cpp:219
+msgid "Hide Me&nu Toolbar"
+msgstr "Sakrij me&nije"
+
+#: management/kmmainview.cpp:221
+msgid "Show Pr&inter Details"
+msgstr "Prikaži &detalje štampača"
+
+#: management/kmmainview.cpp:222
+msgid "Hide Pr&inter Details"
+msgstr "Sakrij d&etalje štampača"
+
+#: management/kmmainview.cpp:226
+msgid "Toggle Printer &Filtering"
+msgstr "Prekidač &filtriranja štampača"
+
+#: management/kmmainview.cpp:230
+msgid "Pri&nter Tools"
+msgstr "&Alati za štampač"
+
+#: management/kmmainview.cpp:295
+msgid "Print Server"
+msgstr "Print server"
+
+#: management/kmmainview.cpp:301
+msgid "Print Manager"
+msgstr "Upravitelj štampom"
+
+#: management/kmmainview.cpp:334
+msgid "An error occurred while retrieving the printer list."
+msgstr "Došlo je do greške kod pribavljanja liste štampača."
+
+#: management/kmmainview.cpp:511
+#, c-format
+msgid "Unable to modify the state of printer %1."
+msgstr "Ne mogu izmijeniti stanje štampača %1."
+
+#: management/kmmainview.cpp:522
+msgid "Do you really want to remove %1?"
+msgstr "Da li stvarno želite obrisati %1?"
+
+#: management/kmmainview.cpp:526
+#, c-format
+msgid "Unable to remove special printer %1."
+msgstr "Ne mogu izbrisati posebni štampač %1."
+
+#: management/kmmainview.cpp:529
+#, c-format
+msgid "Unable to remove printer %1."
+msgstr "Ne mogu izbrisati štampač %1."
+
+#: management/kmmainview.cpp:559
+#, c-format
+msgid "Configure %1"
+msgstr "Podesi %1"
+
+#: management/kmmainview.cpp:566
+#, c-format
+msgid "Unable to modify settings of printer %1."
+msgstr "Ne mogu izmijeniti postavke štampača %1."
+
+#: management/kmmainview.cpp:570
+#, c-format
+msgid "Unable to load a valid driver for printer %1."
+msgstr "Ne mogu učitati ispravan drajver za štampač %1."
+
+#: management/kmmainview.cpp:582
+msgid "Unable to create printer."
+msgstr "Ne mogu napraviti štampač."
+
+#: management/kmmainview.cpp:594
+msgid "Unable to define printer %1 as default."
+msgstr "Ne mogu definisati štampač %1 kao uobičajeni."
+
+#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
+msgid "You are about to print a test page on %1. Do you want to continue?"
+msgstr "Upravo ćete odštampati testnu stranicu na %1. Želite li nastaviti?"
+
+#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
+msgid "Print Test Page"
+msgstr "Štampaj testnu stranicu"
+
+#: management/kminstancepage.cpp:270 management/kmmainview.cpp:632
+#, c-format
+msgid "Test page successfully sent to printer %1."
+msgstr "Testna stranica uspješno poslana na štampač %1."
+
+#: management/kmmainview.cpp:634
+#, c-format
+msgid "Unable to test printer %1."
+msgstr "Ne mogu testirati štampač %1."
+
+#: management/kmmainview.cpp:647
+msgid "Error message received from manager:</p><p>%1</p>"
+msgstr "Poruka o grešci koja je primljena od menadžera:</p><p>%1</p>"
+
+#: management/kmmainview.cpp:649
+msgid "Internal error (no error message)."
+msgstr "Interna greška (nema poruke o grešci)."
+
+#: management/kmmainview.cpp:667
+msgid "Unable to restart print server."
+msgstr "Ne mogu da restartujem print server."
+
+#: management/kmmainview.cpp:672
+msgid "Restarting server..."
+msgstr "Restartujem server..."
+
+#: management/kmmainview.cpp:682
+msgid "Unable to configure print server."
+msgstr "Ne mogu da podesim print server."
+
+#: management/kmmainview.cpp:687
+msgid "Configuring server..."
+msgstr "Podešavanje servera..."
+
+#: management/kmmainview.cpp:842
+msgid ""
+"Unable to start printer tool. Possible reasons are: no printer selected, the "
+"selected printer doesn't have any local device defined (printer port), or the "
+"tool library could not be found."
+msgstr ""
+"Ne mogu da pokrenem alat štampača. Mogući razlozi su: nije izabran štampač, "
+"izabrani štampač nema definisan nijedan lokalni uređaj (port) ili nije "
+"pronađena biblioteka alata."
+
+#: management/kmmainview.cpp:866
+msgid "Unable to retrieve the printer list."
+msgstr "Ne mogu da dobavim listu štampača."
+
+#: management/kmconfiggeneral.cpp:48
+msgid "Refresh Interval"
+msgstr "Interval osvježavanja"
+
+#: management/kmconfiggeneral.cpp:51
+msgid " sec"
+msgstr " sek"
+
+#: management/kmconfiggeneral.cpp:53
+msgid ""
+"This time setting controls the refresh rate of various <b>TDE Print</b> "
+"components like the print manager and the job viewer."
+msgstr ""
+"Ova postavka vremena određuje brzinu osvježavanja na raznim <b>TDE Print</b> "
+"komponentama kao što su menadžer štampe ili preglednik zadataka."
+
+#: management/kmconfiggeneral.cpp:57
+msgid "Test Page"
+msgstr "Probna stranica"
+
+#: management/kmconfiggeneral.cpp:58
+msgid "&Specify personal test page"
+msgstr "&Koristi vlastitu probnu stranicu"
+
+#: management/kmconfiggeneral.cpp:60
+msgid "Preview..."
+msgstr "Pregled..."
+
+#: management/kmconfiggeneral.cpp:70
+msgid "Sho&w printing status message box"
+msgstr "Po&kaži poruku o statusu štampe"
+
+#: management/kmconfiggeneral.cpp:71
+msgid "De&faults to the last printer used in the application"
+msgstr "&Podrazumjevan je zadnji štampač koji je korišten u toj aplikaciji"
+
+#: management/kmconfiggeneral.cpp:127
+msgid ""
+"The selected test page is not a PostScript file. You may not be able to test "
+"your printer anymore."
+msgstr ""
+"Odabrana testna stranica nije PostScript datoteka. Više ne možete testirati vaš "
+"štampač."
+
+#: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:158
+msgid "No Printer"
+msgstr "Nema štampača"
+
+#: management/kmjobviewer.cpp:138 management/kmjobviewer.cpp:177
+#: management/kmjobviewer.cpp:194 management/kmjobviewer.cpp:210
+#: management/kmjobviewer.cpp:356 management/kmjobviewer.cpp:543
+msgid "All Printers"
+msgstr "Svi štampači"
+
+#: management/kmjobviewer.cpp:151
+#, c-format
+msgid "Print Jobs for %1"
+msgstr "Zadaci štampe za %1"
+
+#: management/kmjobviewer.cpp:170 management/kmjobviewer.cpp:172
+#: management/kmjobviewer.cpp:336
+#, c-format
+msgid "Max.: %1"
+msgstr "Maks.: %1"
+
+#: management/kmjobviewer.cpp:235
+msgid "Job ID"
+msgstr "ID zadatka"
+
+#: management/kmjobviewer.cpp:236
+msgid "Owner"
+msgstr "Vlasnik"
+
+#: management/kmjobviewer.cpp:238
+msgid ""
+"_: Status\n"
+"State"
+msgstr "Status"
+
+#: management/kmjobviewer.cpp:239
+msgid "Size (KB)"
+msgstr "Veličina (KB)"
+
+#: management/kmjobviewer.cpp:240
+msgid "Page(s)"
+msgstr "Stranica"
+
+#: management/kmjobviewer.cpp:262
+msgid "&Hold"
+msgstr "&Zadrži"
+
+#: management/kmjobviewer.cpp:263
+msgid "&Resume"
+msgstr "&Nastavi"
+
+#: management/kmjobviewer.cpp:264
+msgid "Remo&ve"
+msgstr "&Ukloni"
+
+#: management/kmjobviewer.cpp:265
+msgid "Res&tart"
+msgstr "&Restartuj"
+
+#: management/kmjobviewer.cpp:266
+msgid "&Move to Printer"
+msgstr "&Pomjeri na štampač..."
+
+#: management/kmjobviewer.cpp:272
+msgid "&Toggle Completed Jobs"
+msgstr "Pre&kidač završenih zadataka"
+
+#: management/kmjobviewer.cpp:275
+msgid "Show Only User Jobs"
+msgstr "Pokaži samo zadatke korisnika"
+
+#: management/kmjobviewer.cpp:276
+msgid "Hide Only User Jobs"
+msgstr "Sakrij samo zadatke korisnika"
+
+#: management/kmjobviewer.cpp:284
+msgid "User Name"
+msgstr "Korisničko ime"
+
+#: management/kmjobviewer.cpp:301
+msgid "&Select Printer"
+msgstr "&Izaberite štampač"
+
+#: management/kmjobviewer.cpp:330
+msgid "Refresh"
+msgstr "Osvježi"
+
+#: management/kmjobviewer.cpp:334
+msgid "Keep window permanent"
+msgstr "Trajno sačuvaj prozor"
+
+#: management/kmjobviewer.cpp:479
+msgid ""
+"Unable to perform action \"%1\" on selected jobs. Error received from manager:"
+msgstr ""
+"Ne mogu da izvršim akciju \"%1\" na izabranim zadacima. Greška koja je "
+"primljena od menadžera:"
+
+#: management/kmjobviewer.cpp:491
+msgid "Hold"
+msgstr "Zadrži"
+
+#: management/kmjobviewer.cpp:496
+msgid "Resume"
+msgstr "Nastavi"
+
+#: management/kmjobviewer.cpp:506
+msgid "Restart"
+msgstr "Ponovi"
+
+#: management/kmjobviewer.cpp:514
+#, c-format
+msgid "Move to %1"
+msgstr "Pomjeri na %1"
+
+#: management/kmjobviewer.cpp:674
+msgid "Operation failed."
+msgstr "Operacija nije uspjela."
+
+#: management/kmwsocket.cpp:38
+msgid "Network Printer Information"
+msgstr "Informacije o mrežnom štampaču"
+
+#: management/kmwsocket.cpp:48
+msgid "&Printer address:"
+msgstr "&Adresa štampača"
+
+#: management/kmwsocket.cpp:49
+msgid "P&ort:"
+msgstr "P&ort:"
+
+#: management/kmwsocket.cpp:99
+msgid "You must enter a printer address."
+msgstr "Morate navesti adresu štampača."
+
+#: management/kmwsocket.cpp:110
+msgid "Wrong port number."
+msgstr "Pogrešan broj porta."
+
+#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117
+msgid "No printer found at this address/port."
+msgstr "Nije pronađen štampač na ovoj adresi/portu."
+
+#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136
+msgid ""
+"_: Unknown host - 1 is the IP\n"
+"<Unknown> (%1)"
+msgstr "<Nepoznat> (%1)"
+
+#: management/kmconfigfonts.cpp:43
+msgid "Font Settings"
+msgstr "Postavke fontova"
+
+#: management/kmconfigfonts.cpp:46
+msgid "Fonts Embedding"
+msgstr "Ugrađivanje fontova"
+
+#: management/kmconfigfonts.cpp:47
+msgid "Fonts Path"
+msgstr "Staza do fontova"
+
+#: management/kmconfigfonts.cpp:49
+msgid "&Embed fonts in PostScript data when printing"
+msgstr "&Ugradi fontove u PostScript podatke prilikom štampanja"
+
+#: management/kmconfigfonts.cpp:57
+msgid "&Up"
+msgstr "&Gore"
+
+#: management/kmconfigfonts.cpp:58
+msgid "&Down"
+msgstr "&Dole"
+
+#: management/kmconfigfonts.cpp:59
+msgid "&Add"
+msgstr "&Dodaj"
+
+#: management/kmconfigfonts.cpp:61
+msgid "Additional director&y:"
+msgstr "Dodatni &direktorij:"
+
+#: management/kmconfigfonts.cpp:85
+msgid ""
+"These options will automatically put fonts in the PostScript file which are not "
+"present on the printer. Font embedding usually produces better print results "
+"(closer to what you see on the screen), but larger print data as well."
+msgstr ""
+"Ova opcija automatski dodaje u PostScript datoteku fontove koji nisu prisutni u "
+"samom štampaču. Ugradnja fontova obično daje bolje rezultate štampe "
+"(približnije onome što vidite na ekranu), ali i više podataka koje treba "
+"štampati."
+
+#: management/kmconfigfonts.cpp:89
+msgid ""
+"When using font embedding you can select additional directories where TDE "
+"should search for embeddable font files. By default, the X server font path is "
+"used, so adding those directories is not needed. The default search path should "
+"be sufficient in most cases."
+msgstr ""
+"Kada koristite ugrađivanje fontova, možete izabrati dodatne direktorije gdje "
+"TDE treba tražiti ugradive datoteke fontova. Podrazumjevano je korištenje staze "
+"fontova X servera, tako da ne trebate dodavati te direktorije. Podrazumjevani "
+"put pretrage bi trebao biti dovoljan u većini slučajeva"
+
+#: management/networkscanner.cpp:104 management/networkscanner.cpp:184
+msgid "Sc&an"
+msgstr "Pr&etraži"
+
+#: management/networkscanner.cpp:111
+msgid "Network scan:"
+msgstr "Pretraga mreže:"
+
+#: management/networkscanner.cpp:112 management/networkscanner.cpp:299
+#: management/networkscanner.cpp:310
+#, c-format
+msgid "Subnet: %1"
+msgstr "Subnet: %1"
+
+#: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149
+msgid "&Abort"
+msgstr "&Prekini"
+
+#: management/networkscanner.cpp:161
+msgid ""
+"You are about to scan a subnet (%1.*) that does not correspond to the current "
+"subnet of this computer (%2.*). Do you want to scan the specified subnet "
+"anyway?"
+msgstr ""
+"Upravo ćete preskenirati subnet (%1.*) koji ne odgovara trenutnom subnetu ovog "
+"računara (%2.*). Želite li svejedno izvršiti skeniranje?"
+
+#: management/networkscanner.cpp:164
+msgid "&Scan"
+msgstr "&Skeniraj"
+
+#: management/kminstancepage.cpp:61
+msgid ""
+"Define/Edit here instances for the current selected printer. An instance is a "
+"combination of a real (physical) printer and a set of predefined options. For a "
+"single InkJet printer, you could define different print formats like <i>"
+"DraftQuality</i>, <i>PhotoQuality</i> or <i>TwoSided</i>"
+". Those instances appear as normal printers in the print dialog and allow you "
+"to quickly select the print format you want."
+msgstr ""
+"Ovdje definišete / mijenjate instance za trenutno izabrani štampač. Instanca je "
+"kombinacija stvarnog (fizičkog) štampača i skupa predefinisanih opcija. Za "
+"jedan InkJet štampač, možete definisati dva različita formata štampe npr. <i>"
+"DraftKvalitet</i>, <i>FotoKvalitet</i> ili <i>Dvostrano</i>"
+". Ove instance se javljaju kao obični štampači u dijalogu štampe i omogućuju "
+"vam da brzo izaberete koji format štampe želite."
+
+#: management/kminstancepage.cpp:87
+msgid "New..."
+msgstr "Novo..."
+
+#: management/kminstancepage.cpp:88
+msgid "Copy..."
+msgstr "Kopiraj..."
+
+#: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91
+msgid "Set as Default"
+msgstr "Postavi uobičajeno"
+
+#: management/kminstancepage.cpp:92
+msgid "Settings"
+msgstr "Postavke..."
+
+#: management/kminstancepage.cpp:94
+msgid "Test..."
+msgstr "Test..."
+
+#: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126
+#: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145
+#: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164
+#: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190
+#: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210
+#: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260
+msgid "(Default)"
+msgstr "(Uobičajen)"
+
+#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
+msgid "Instance Name"
+msgstr "Naziv instance"
+
+#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
+msgid "Enter name for new instance (leave untouched for default):"
+msgstr "Unesite naziv za novu instancu (ostavite nedirnuto za uobičajeni):"
+
+#: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187
+msgid "Instance name must not contain any spaces or slashes."
+msgstr "Naziv instance ne smije sadržavati razmake ili kose crte."
+
+#: management/kminstancepage.cpp:161
+msgid "Do you really want to remove instance %1?"
+msgstr "Da li stvarno želite obrisati instancu %1?"
+
+#: management/kminstancepage.cpp:161
+msgid ""
+"You can't remove the default instance. However all settings of %1 will be "
+"discarded. Continue?"
+msgstr ""
+"Ne možete pobrisati podrazumjevanu instancu. Ipak sve postavke za %1 će biti "
+"izgubljene. Da nastavim?"
+
+#: management/kminstancepage.cpp:213
+#, c-format
+msgid "Unable to find instance %1."
+msgstr "Ne mogu pronaći instancu %1."
+
+#: management/kminstancepage.cpp:215
+#, c-format
+msgid ""
+"Unable to retrieve printer information. Message from printing system: %1."
+msgstr "Ne mogu dobaviti informacije o štampaču. Poruka sistema štampe: %1."
+
+#: management/kminstancepage.cpp:232
+msgid "The instance name is empty. Please select an instance."
+msgstr "Ime instance je prazno. Molim izaberite instancu."
+
+#: management/kminstancepage.cpp:264
+msgid "Internal error: printer not found."
+msgstr "Interna greška: štampač nije pronađen."
+
+#: management/kminstancepage.cpp:268
+#, c-format
+msgid "Unable to send test page to %1."
+msgstr "Nisam uspio poslati testnu stranicu na %1."
+
+#: management/kmpropcontainer.cpp:35
+msgid "Change..."
+msgstr "Promijeni..."
+
+#: management/kmpropbackend.cpp:34
+msgid "Printer type:"
+msgstr "Tip štampača:"
+
+#: management/kmpropbackend.cpp:48
+msgid "Interface"
+msgstr "Interface"
+
+#: management/kmpropbackend.cpp:49
+msgid "Interface Settings"
+msgstr "Postavke interface-a"
+
+#: management/kmpropbackend.cpp:62
+msgid "IPP Printer"
+msgstr "IPP štampač"
+
+#: management/kmpropbackend.cpp:63
+msgid "Local USB Printer"
+msgstr "Lokalni USB štampač"
+
+#: management/kmpropbackend.cpp:64
+msgid "Local Parallel Printer"
+msgstr "Lokalni paralelni štampač"
+
+#: management/kmpropbackend.cpp:65
+msgid "Local Serial Printer"
+msgstr "Lokalni serijski štampač"
+
+#: management/kmpropbackend.cpp:66
+msgid "Network Printer (socket)"
+msgstr "Mrežni štampač (socket)"
+
+#: management/kmpropbackend.cpp:67
+msgid "SMB printers (Windows)"
+msgstr "SMB štampači (Windows)"
+
+#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68
+#: rlpr/kmwrlpr.cpp:116
+msgid "Remote LPD queue"
+msgstr "Udaljeni LPD red"
+
+#: management/kmpropbackend.cpp:69
+msgid "File printer"
+msgstr "Datotečni štampač"
+
+#: management/kmpropbackend.cpp:70
+msgid "Serial Fax/Modem printer"
+msgstr "Serijski fax/modem štampač"
+
+#: management/kmpropbackend.cpp:71
+msgid ""
+"_: Unknown Protocol\n"
+"Unknown"
+msgstr "Nepoznat"
+
+#: management/kmwname.cpp:34
+msgid "General Information"
+msgstr "Opće informacije"
+
+#: management/kmwname.cpp:37
+msgid ""
+"<p>Enter the information concerning your printer or class. <b>Name</b> "
+"is mandatory, <b>Location</b> and <b>Description</b> "
+"are not (they may even not be used on some systems).</p>"
+msgstr ""
+"<p>Unesite informacije koje se tiču vašeg štampača ili razreda.. <b>Ime</b> "
+"je obavezno, <b>Lokacija</b> i <b>Opis</b> nisu (na nekim sistemima možda neće "
+"biti ni korišteni).</p>"
+
+#: management/kmwname.cpp:39
+msgid "Name:"
+msgstr "Ime:"
+
+#: kprintdialog.cpp:284 management/kmwname.cpp:40
+msgid "Location:"
+msgstr "Lokacija:"
+
+#: management/kmwname.cpp:48
+msgid "You must supply at least a name."
+msgstr "Morate navesti bar ime."
+
+#: management/kmwname.cpp:56
+msgid ""
+"It is usually not a good idea to include spaces in printer name: it may prevent "
+"your printer from working correctly. The wizard can strip all spaces from the "
+"string you entered, resulting in %1; what do you want to do?"
+msgstr ""
+"Obično nije pametno stavljati razmake u ime štampača. To može izazvati da vaš "
+"štampač ne radi kako treba. Čarobnjak može pobrisati razmake iz teksta koji se "
+"unijeli, što će dati ovaj rezultat: %1. Šta želite uraditi?"
+
+#: management/kmwname.cpp:62
+msgid "Strip"
+msgstr "Pobriši razmake"
+
+#: kprinterimpl.cpp:510 management/kmwname.cpp:62
+msgid "Keep"
+msgstr "Zadrži"
+
+#: management/kmdriverdialog.cpp:48
+msgid ""
+"Some options are in conflict. You must resolve those conflicts before "
+"continuing."
+msgstr ""
+"Neke od izabranih opcija su u konfliktu. Morate razriješiti te konflikte prije "
+"nastavka."
+
+#: management/kmpropwidget.cpp:50
+msgid ""
+"<qt>Unable to change printer properties. Error received from manager:"
+"<p>%1</p></qt>"
+msgstr ""
+"<qt>Ne mogu da promijenim osobine štampača. Greška koja je primljena od "
+"menadžera:"
+"<p>%1</p></qt>"
+
+#: management/kmconfigpreview.cpp:35
+msgid "Preview"
+msgstr "Pregled"
+
+#: management/kmconfigpreview.cpp:36
+msgid "Preview Settings"
+msgstr "Postavke pregleda"
+
+#: management/kmconfigpreview.cpp:39
+msgid "Preview Program"
+msgstr "Program za pregled"
+
+#: management/kmconfigpreview.cpp:41
+msgid "&Use external preview program"
+msgstr "&Koristi vanjski program za pregled"
+
+#: management/kmconfigpreview.cpp:44
+msgid ""
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
+msgstr ""
+"Možete koristiti neki vanjski program za pregled (PS preglednik) umjesto "
+"TDEovog ugrađenog sistema za pregled. Obratite pažnju da ako nema TDEovog "
+"podrazumjevanog PS preglednika (KGhostView), TDE automatski pokušava naći neki "
+"drugi vanjski PostScript preglednik"
+
+#: management/kmpropdriver.cpp:36
+msgid "Manufacturer:"
+msgstr "Proizvođač:"
+
+#: management/kmpropdriver.cpp:37
+msgid "Printer model:"
+msgstr "Model štampača:"
+
+#: management/kmpropdriver.cpp:38
+msgid "Driver info:"
+msgstr "Drajver info:"
+
+#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53
+#: management/kmwend.cpp:104
+msgid "Driver"
+msgstr "Drajver"
+
+#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54
+msgid "Driver Settings"
+msgstr "Postavke drajvera"
+
+#: management/kaddprinterwizard.cpp:10
+msgid "Configure TDE Print"
+msgstr "Podesi TDE štampu"
+
+#: management/kaddprinterwizard.cpp:11
+msgid "Configure print server"
+msgstr "Podesi server štampe"
+
+#: management/kaddprinterwizard.cpp:18
+msgid "Start the add printer wizard"
+msgstr "Pokreni čarobnjak za dodavanje štampača"
+
+#: management/kmspecialprinterdlg.cpp:46
+msgid "Add Special Printer"
+msgstr "Dodaj poseban štampač"
+
+#: management/kmspecialprinterdlg.cpp:58
+msgid "&Location:"
+msgstr "&Lokacija:"
+
+#: management/kmspecialprinterdlg.cpp:66
+msgid "Command &Settings"
+msgstr "&Postavke naredbe"
+
+#: management/kmspecialprinterdlg.cpp:69
+msgid "Outp&ut File"
+msgstr "I&zlazna datoteka"
+
+#: management/kmspecialprinterdlg.cpp:71
+msgid "&Enable output file"
+msgstr "&Uključi izlaznu datoteku"
+
+#: management/kmspecialprinterdlg.cpp:88
+msgid "Filename e&xtension:"
+msgstr "&Ekstenzija imena datoteke:"
+
+#: management/kmspecialprinterdlg.cpp:105
+msgid ""
+"<p>The command will use an output file. If checked, make sure the command "
+"contains an output tag.</p>"
+msgstr ""
+"<p>Ova naredba će koristiti izlaznu datoteku. Ako je uključite, pobrinite se da "
+"naredba sadrži tag za izlaz.</p>"
+
+#: management/kmspecialprinterdlg.cpp:108
+#, c-format
+msgid ""
+"<p>The command to execute when printing on this special printer. Either enter "
+"the command to execute directly, or associate/create a command object with/for "
+"this special printer. The command object is the preferred method as it provides "
+"support for advanced settings like mime type checking, configurable options and "
+"requirement list (the plain command is only provided for backward "
+"compatibility). When using a plain command, the following tags are "
+"recognized:</p>"
+"<ul>"
+"<li><b>%in</b>: the input file (required).</li>"
+"<li><b>%out</b>: the output file (required if using an output file).</li>"
+"<li><b>%psl</b>: the paper size in lower case.</li>"
+"<li><b>%psu</b>: the paper size with the first letter in upper case.</li></ul>"
+msgstr ""
+"<p>Naredba koja će se izvršiti kod štampanja na ovaj posebni štampač. Ili "
+"unesite naredbu koja će se izvršiti direktno ili povežite/napravite naredbeni "
+"objekat sa/za ovaj posebni štampač. Naredbeni objekat je preferirani metod zato "
+"što pruža podršku za napredne postavke kao što je provjera MIME tipa, podesive "
+"opcije i lista zahtjeva (obična naredba je omogućena samo radi kompatibilnosti "
+"unatrag). Kada koristite običnu naredbu, prepoznati su ovi tagovi:</p>"
+"<ul>"
+"<li><b>%in</b>: ulazna datoteka (obavezno).</li>"
+"<li><b>%out</b>: izlazna datoteka (obavezno ako koristite izlaznu "
+"datoteku).</li>"
+"<li><b>%psl</b>: veličina papira malim slovima.</li>"
+"<li><b>%psu</b>: veličina papira gdje je prvo slovo veliko.</li></ul>"
+
+#: management/kmspecialprinterdlg.cpp:118
+msgid ""
+"<p>The default mimetype for the output file (e.g. application/postscript).</p>"
+msgstr ""
+"<p>Podrazumjevani MIME tip za izlaznu datoteku (npr.: "
+"application/postscript).</p>"
+
+#: management/kmspecialprinterdlg.cpp:121
+msgid "<p>The default extension for the output file (e.g. ps, pdf, ps.gz).</p>"
+msgstr ""
+"<p>Podrazumjevana ekstenzija za izlaznu datoteku (npr.: ps, pdf, ps.gz).</p>"
+
+#: management/kmspecialprinterdlg.cpp:170
+msgid "You must provide a non-empty name."
+msgstr "Morate navesti ime koje nije prazno."
+
+#: management/kmspecialprinterdlg.cpp:178
+#, c-format
+msgid "Invalid settings. %1."
+msgstr "Neispravne postavke. %1"
+
+#: management/kmspecialprinterdlg.cpp:197
+#, c-format
+msgid "Configuring %1"
+msgstr "Podešavam %1"
+
+#: management/kmwdriverselect.cpp:37
+msgid "Driver Selection"
+msgstr "Odabir drajvera"
+
+#: management/kmwdriverselect.cpp:43
+msgid ""
+"<p>Several drivers have been detected for this model. Select the driver you "
+"want to use. You will have the opportunity to test it as well as to change it "
+"if necessary.</p>"
+msgstr ""
+"<p>Otkriveno je nekoliko drarjvera za ovaj model. Izaberite onaj drajver koji "
+"želite koristiti. Imaćete mogućnost da ga testirate te da ga promijenite ako to "
+"bude potrebno.</p>"
+
+#: management/kmwdriverselect.cpp:46
+msgid "Driver Information"
+msgstr "Informacije o drajveru"
+
+#: management/kmwdriverselect.cpp:62
+msgid "You must select a driver."
+msgstr "Morate odabrati drajver."
+
+#: management/kmwdriverselect.cpp:82
+msgid " [recommended]"
+msgstr " [preporučeno]"
+
+#: management/kmwdriverselect.cpp:113
+msgid "No information about the selected driver."
+msgstr "Nema informacija o izabranom drajveru."
+
+#: management/kmwend.cpp:33
+msgid "Confirmation"
+msgstr "Odobrenje"
+
+#: management/kmwend.cpp:50 management/kmwend.cpp:106
+#: management/kmwend.cpp:109 tdefilelist.cpp:102
+msgid "Type"
+msgstr "Vrsta"
+
+#: management/kmwend.cpp:52
+msgid "Location"
+msgstr "Lokacija"
+
+#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59
+msgid "Members"
+msgstr "Članovi"
+
+#: management/kmwend.cpp:69
+msgid "Backend"
+msgstr "Backend"
+
+#: management/kmwend.cpp:74
+msgid "Device"
+msgstr "Uređaj"
+
+#: management/kmwend.cpp:77
+msgid "Printer IP"
+msgstr "IP štampača"
+
+#: management/kmwend.cpp:78 management/kmwend.cpp:89
+msgid "Port"
+msgstr "Port"
+
+#: management/kmwend.cpp:81 management/kmwend.cpp:88
+msgid "Host"
+msgstr "Računar"
+
+#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48
+msgid "Queue"
+msgstr "Red"
+
+#: management/kmwend.cpp:91
+msgid "Account"
+msgstr "Račun"
+
+#: management/kmwend.cpp:96
+msgid "URI"
+msgstr "URI"
+
+#: management/kmwend.cpp:109
+msgid "DB driver"
+msgstr "DB drajver"
+
+#: management/kmwend.cpp:109
+msgid "External driver"
+msgstr "Vanjski drajver"
+
+#: management/kmwend.cpp:110
+msgid "Manufacturer"
+msgstr "Proizvođač"
+
+#: management/kmwend.cpp:111
+msgid "Model"
+msgstr "Model"
+
+#: management/kmwlpd.cpp:41
+msgid "LPD Queue Information"
+msgstr "Informacije o LPD redu"
+
+#: management/kmwlpd.cpp:44
+msgid ""
+"<p>Enter the information concerning the remote LPD queue; this wizard will "
+"check it before continuing.</p>"
+msgstr ""
+"<p>Unesite informacije koje se tiču udaljenog LPD reda štampe. Ovaj čarobnjak "
+"će ih provjeriti prije nastavka.</p>"
+
+#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34
+#: rlpr/kmwrlpr.cpp:62
+msgid "Host:"
+msgstr "Računar:"
+
+#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63
+msgid "Queue:"
+msgstr "Red:"
+
+#: management/kmwlpd.cpp:54
+msgid "Some information is missing."
+msgstr "Neke informacije nedostaju."
+
+#: management/kmwlpd.cpp:61
+msgid "Cannot find queue %1 on server %2; do you want to continue anyway?"
+msgstr "Ne mogu naći red %1 na serveru %2. Želite li svejedno nastaviti?"
+
+#: management/kmpropmembers.cpp:40
+msgid "Class Members"
+msgstr "Članovi razreda"
+
+#: kmuimanager.cpp:158
+#, c-format
+msgid "Configuration of %1"
+msgstr "Konfiguracija %1"
+
+#: cups/kmwippprinter.cpp:187 kmprinter.cpp:139
+msgid "Idle"
+msgstr "Mirovanje"
+
+#: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140
+msgid "Processing..."
+msgstr "Procesiram..."
+
+#: cups/kmwippprinter.cpp:188 kmprinter.cpp:141
+msgid "Stopped"
+msgstr "Zaustavljen"
+
+#: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142
+msgid ""
+"_: Unknown State\n"
+"Unknown"
+msgstr "Nepoznato"
+
+#: kmprinter.cpp:144
+msgid "(rejecting jobs)"
+msgstr "(odbacujem zahtjeve)"
+
+#: kmprinter.cpp:144
+msgid "(accepting jobs)"
+msgstr "(prihvatam zahtjeve)"
+
+#: kmprinter.cpp:197 kprintdialog.cpp:983
+msgid "All Files"
+msgstr "Sve datoteke"
+
+#: kpqtpage.cpp:70
+msgid ""
+" <qt>  <b>Selection of color mode:</b> You can choose between 2 options:  "
+"<ul>"
+"<li><b>Color</b> and</li>  "
+"<li><b>Grayscale</b></li></ul>  <b>Note:</b> This selection field may be grayed "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
+"information about your print file. In this case the embedded color- or "
+"grayscale information  of your printfile, and the default handling of the "
+"printer take precedence.  </qt>"
+msgstr ""
+
+#: kpqtpage.cpp:79
+msgid ""
+" <qt>  <b>Selection of page size:</b> Select paper size to be printed on from  "
+"the drop-down menu.  "
+"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed.  </qt>"
+msgstr ""
+
+#: kpqtpage.cpp:84
+msgid ""
+" <qt>  <b>Selection of pages per sheet:</b>  You can choose to print more than "
+"one page onto each sheet of paper.  This is sometimes useful to save paper.  "
+"<p><b>Note 1:</b> the page images get scaled down accordingly to print 2 or 4 "
+"pages per sheet.  The page image does not get scaled if you print 1 page per "
+"sheet (the default setting.).  "
+"<p><b>Note 2:</b> If you select multiple pages per sheet here, the scaling and "
+"re-arranging is done  by your printing system.  "
+"<p><b>Note 3, regarding \"Other\":</b> You cannot really select <em>Other</em> "
+"as the number of  pages to print on one sheet.\"Other\" is checkmarked here for "
+"information purposes only.  "
+"<p>To select 8, 9, 16 or other numbers of  pages per sheet:  "
+"<ul>  "
+"<li> go to the tab headlined \"Filter\"</li> "
+"<li> enable the <em>Multiple Pages per Sheet</em> filter </li> "
+"<li> and configure it (bottom-most button on the right of the \"Filters\" tab). "
+"</li> </ul> </qt>"
+msgstr ""
+
+#: kpqtpage.cpp:102
+msgid ""
+" <qt>  <b>Selection of image orientation:</b> Orientation of the printed  "
+"pageimage on your paper is controlled by the radio buttons. By default,  the "
+"orientation is <em>Portrait</em>  "
+"<p>You can select 2 alternatives:  "
+"<ul>  "
+"<li> <b>Portrait.</b>.Portrait is the default setting. </li>  "
+"<li> <b>Landscape.</b> </li>  </ul>  The icon changes according to your "
+"selection. </qt>"
+msgstr ""
+
+#: kpqtpage.cpp:113
+msgid "Print Format"
+msgstr "Format štampe"
+
+#: kpqtpage.cpp:123
+msgid "Color Mode"
+msgstr "Mod boje"
+
+#: kpqtpage.cpp:135
+msgid "Colo&r"
+msgstr "&U boji"
+
+#: kpqtpage.cpp:138
+msgid "&Grayscale"
+msgstr "&Nijanse sive"
+
+#: kpqtpage.cpp:151
+msgid "Ot&her"
+msgstr "O&stalo"
 
 #: kprintdialog.cpp:97
 msgid ""
@@ -337,34 +2769,6 @@ msgstr ""
 "Razno</em>: <em>'Podrazumijevaj posljednje korišteni štampač u programu'</em> "
 "isključeno.)</qt>"
 
-#: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90
-#: management/smbview.cpp:43
-msgid "Printer"
-msgstr "Štampač"
-
-#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56
-#: management/kxmlcommanddlg.cpp:114
-msgid "&Name:"
-msgstr "&Ime:"
-
-#: kprintdialog.cpp:280 management/kminfopage.cpp:50
-msgid ""
-"_: Status\n"
-"State:"
-msgstr "Status:"
-
-#: kprintdialog.cpp:282 management/kminfopage.cpp:48
-msgid "Type:"
-msgstr "Vrsta:"
-
-#: kprintdialog.cpp:284 management/kmwname.cpp:40
-msgid "Location:"
-msgstr "Lokacija:"
-
-#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176
-msgid "Comment:"
-msgstr "Komentar:"
-
 #: kprintdialog.cpp:289
 msgid "P&roperties"
 msgstr "&Postavke"
@@ -445,267 +2849,482 @@ msgstr "Inicijalizujem sistem štampe..."
 msgid "Print to File"
 msgstr "Štampaj u datoteku"
 
-#: kmprinter.cpp:197 kprintdialog.cpp:983
-msgid "All Files"
-msgstr "Sve datoteke"
+#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85
+msgid "Empty host name."
+msgstr "Prazno ime računara."
 
-#: kprintprocess.cpp:75
-msgid "File transfer failed."
-msgstr "Transfer datoteke nije uspio."
+#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87
+msgid "Empty queue name."
+msgstr "Prazno ime reda."
 
-#: kprintprocess.cpp:81
-msgid "Abnormal process termination (<b>%1</b>)."
-msgstr "Nenormalan prekid procesa (<b>%1</b>)."
+#: rlpr/kmrlprmanager.cpp:63
+msgid "Printer not found."
+msgstr "Štampač nije pronađen."
 
-#: kprintprocess.cpp:83
-msgid "<b>%1</b>: execution failed with message:<p>%2</p>"
-msgstr "<b>%1</b>: izvršenje nije uspjelo uz poruku:<p>%2</p>"
+#: rlpr/kmrlprmanager.cpp:75
+msgid "Not implemented yet."
+msgstr "Još nije napravljeno."
 
-#: lpr/kmlprjobmanager.cpp:83
-msgid "Unsupported operation."
-msgstr "Operacija nije podržana."
+#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50
+msgid "Remote LPD Queue Settings"
+msgstr "Postavke udaljenog LPD reda"
 
-#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37
-msgid "Spooler"
-msgstr "Spooler"
+#: rlpr/kmproxywidget.cpp:32
+msgid "Proxy Settings"
+msgstr "Proxy postavke"
 
-#: lpr/kmconfiglpr.cpp:34
-msgid "Spooler Settings"
-msgstr "Postavke spoolera"
+#: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34
+msgid "&Host:"
+msgstr "&Računar:"
 
-#: lpr/kmlprmanager.cpp:289
-msgid "The printcap file is a remote file (NIS). It cannot be written."
-msgstr "printcap datoteka je udaljena datoteka (NIS). Ne može se pisati u nju."
+#: rlpr/kmproxywidget.cpp:36
+msgid "&Use proxy server"
+msgstr "&Koristi proxy server"
 
-#: lpr/kmlprmanager.cpp:305
-msgid ""
-"Unable to save printcap file. Check that you have write permissions for that "
-"file."
-msgstr ""
-"Ne mogu spasiti printcap datoteku. Provjerite da li imate privilegije za "
-"pisanje u tu datoteku."
+#: rlpr/kmwrlpr.cpp:124
+msgid "Remote queue %1 on %2"
+msgstr "Udaljeni red %1 na %2"
 
-#: lpr/kmlprmanager.cpp:330
-msgid "Internal error: no handler defined."
-msgstr "Interna greška: nije definisan handler."
+#: rlpr/kmwrlpr.cpp:199
+msgid "No Predefined Printers"
+msgstr "Nema predefinisanih štampača"
 
-#: lpr/kmlprmanager.cpp:344
-msgid "Couldn't determine spool directory. See options dialog."
-msgstr "Ne mogu odrediti spool direktorij. Pogledajte dijalog sa opcijama."
+#: rlpr/kmconfigproxy.cpp:29
+msgid "Proxy"
+msgstr "Proxy"
 
-#: lpr/kmlprmanager.cpp:350
+#: rlpr/kmconfigproxy.cpp:30
+msgid "RLPR Proxy Server Settings"
+msgstr "Postavke RLPR proxy servera"
+
+#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53
 msgid ""
-"Unable to create the spool directory %1. Check that you have the required "
-"permissions for that operation."
+"The <b>%1</b> executable could not be found in your path. Check your "
+"installation."
 msgstr ""
-"Ne mogu napraviti spool direktorij %1. Provjerite da li imate potrebne "
-"privilegije za tu operaciju."
+"Izvršna datoteka <b>%1</b> nije pronađena u vašem putu. Provjerite vašu "
+"instalaciju."
 
-#: lpr/kmlprmanager.cpp:382
-#, c-format
+#: rlpr/krlprprinterimpl.cpp:73
+msgid "The printer is incompletely defined. Try to reinstall it."
+msgstr "Štampač je nepotpuno definisan. Probajte ga reinstalirati."
+
+#: plugincombobox.cpp:33
 msgid ""
-"The printer has been created but the print daemon could not be restarted. %1"
+" <qt><b>Print Subsystem Selection</b> "
+"<p>This combo box shows (and lets you select) a print subsystem to be used by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
+"itself upon first startup. Most Linux distributions have \"CUPS\", the <em>"
+"Common UNIX Printing System</em>. </qt>"
 msgstr ""
-"Štampač je napravljen, ali demon za štampu nije mogao biti restartovan. %1"
+"<qt>Ovo kombinirano polje prikazuje (i omogućava vam da odaberete) podsistem za "
+"štampu koji će koristiti TDEPrint. (Ovaj podsistem za štampu mora, naravno, da "
+"bude instaliran unutar vašeg operativnog sistema). TDEPrint obično uspijeva sam "
+"da ga otkrije. Većina distribucija linux-a sadrži \"CUPS\", <em>"
+"Common Unix Printing System</em>.</qt>"
 
-#: lpr/kmlprmanager.cpp:410
+#: plugincombobox.cpp:45
+msgid "Print s&ystem currently used:"
+msgstr "Sist&em štampe koji se trenutno koristi:"
+
+#: plugincombobox.cpp:91
 msgid ""
-"Unable to remove spool directory %1. Check that you have write permissions for "
-"that directory."
+" <qt><b>Current Connection</b> "
+"<p>This line shows which CUPS server your PC is currently connected to for "
+"printing and retrieving printer info. To switch to a different CUPS server, "
+"click \"System Options\", then select \"Cups server\" and fill in the required "
+"info. </qt>"
 msgstr ""
-"Ne mogu brisati spool direktorij %1. Provjerite da li imate privilegije za "
-"pisanje u taj direktorij."
+"<qt>Ova linija prikazuje na koji CUPS server je trenutno povezan vaš računar, "
+"za štampanje i dobavljanje informacija o štampačima. Da biste se prebacili na "
+"drugi CUPS server, pritisnite dugme \"Sistemske opcije\", zatim odaberite "
+"\"CUPS server\" i popunite potrebne podatke.</qt>"
 
-#: lpr/kmlprmanager.cpp:458
-msgid "&Edit printcap Entry..."
-msgstr "&Izmijeni printcap unos..."
+#: kprinter.cpp:280
+msgid "Initialization..."
+msgstr "Inicijalizacija..."
 
-#: lpr/kmlprmanager.cpp:473
+#: kprinter.cpp:283 kprinter.cpp:909
+#, c-format
+msgid "Generating print data: page %1"
+msgstr "Generišem podatke za štampu: stranica %1"
+
+#: kprinter.cpp:429
+msgid "Previewing..."
+msgstr "Pregled..."
+
+#: kprinter.cpp:690 tdeprintd.cpp:158
+#, c-format
 msgid ""
-"Editing a printcap entry manually should only be done by confirmed system "
-"administrator. This may prevent your printer from working. Do you want to "
-"continue?"
+"<p><nobr>A print error occurred. Error message received from system:</nobr></p>"
+"<br>%1"
 msgstr ""
-"Izmjenu printcap unosa ručno treba raditi samo potvrđen sistemski "
-"administrator. Ona može učiniti da štampač više ne radi. Želite li nastaviti?"
+"<p><nobr>Došlo je do greške pri štampanju. Poruka od sistema:</nobr></p>"
+"<br>%1"
 
-#: lpr/kmlprmanager.cpp:489
-#, c-format
-msgid "Spooler type: %1"
-msgstr "Tip spoolera: %1"
+#: kprinterimpl.cpp:156
+msgid "Cannot copy multiple files into one file."
+msgstr "Ne mogu kopirati više datoteka u jednu datoteku."
 
-#: lpr/matichandler.cpp:82
-msgid "Network printer"
-msgstr "Mrežni štampač"
+#: kprinterimpl.cpp:165
+msgid "Cannot save print file to %1. Check that you have write access to it."
+msgstr ""
+"Ne mogu spasiti datoteku štampe u %1. Provjerite da li imate pristup za "
+"pisanje."
 
-#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86
+#: kprinterimpl.cpp:233
 #, c-format
-msgid "Local printer on %1"
-msgstr "Lokalni štampač na %1"
+msgid "Printing document: %1"
+msgstr "Štampam dokument: %1"
 
-#: lpr/matichandler.cpp:245
-msgid "Internal error."
-msgstr "Interna greška."
+#: kprinterimpl.cpp:251
+#, c-format
+msgid "Sending print data to printer: %1"
+msgstr "Šaljem podatke na štampač: %1"
 
-#: cups/kmcupsmanager.cpp:634 lpr/matichandler.cpp:254
-#: lpr/matichandler.cpp:358
+#: kprinterimpl.cpp:279
+msgid "Unable to start child print process. "
+msgstr "Ne mogu pokrenuti dijete-proces štampe. "
+
+#: kprinterimpl.cpp:281
 msgid ""
-"Unable to find the executable foomatic-datafile in your PATH. Check that "
-"Foomatic is correctly installed."
+"The TDE print server (<b>tdeprintd</b>) could not be contacted. Check that this "
+"server is running."
 msgstr ""
-"Ne mogu pronaći izvršni foomatic-datafile u vašem PATHu. Provjerite da li je "
-"Foomatic ispravno instaliran."
+"Ne mogu kontaktirati TDEov print server (<b>tdeprintd</b>"
+"). Provjerite da li je pokrenut."
 
-#: cups/kmcupsmanager.cpp:666 lpr/matichandler.cpp:286
-#: lpr/matichandler.cpp:405
+#: kprinterimpl.cpp:283
 msgid ""
-"Unable to create the Foomatic driver [%1,%2]. Either that driver does not "
-"exist, or you don't have the required permissions to perform that operation."
+"_: 1 is the command that <files> is given to\n"
+"Check the command syntax:\n"
+"%1 <files>"
 msgstr ""
-"Ne mogu da napravim Foomatic drajver [%1,%2]. Ili taj drajver ne postoji, ili "
-"nemate potrebne dozvole da obavite tu operaciju."
+"Provjerite sintaksu komande:\n"
+"%1 <datoteke>"
 
-#: lpr/matichandler.cpp:339
+#: kprinterimpl.cpp:290
+msgid "No valid file was found for printing. Operation aborted."
+msgstr "Nije pronađena ispravna datoteka za štampu. Operacija prekinuta."
+
+#: kprinterimpl.cpp:325
 msgid ""
-"You probably don't have the required permissions to perform that operation."
-msgstr "Vjerovatno nemate potrebne privilegije da obavite tu operaciju."
+"<p>Unable to perform the requested page selection. The filter <b>psselect</b> "
+"cannot be inserted in the current filter chain. See <b>Filter</b> "
+"tab in the printer properties dialog for further information.</p>"
+msgstr ""
+"<p>Ne mogu izvršiti zahtjevani izbor stranice. Filter<b>psselect</b> "
+"ne može biti dodan na trenutni lanac filtera. Pogledajte list <b>Filter</b> "
+"u osobinama štampača za daljnje informacije.</p>"
 
-#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276
-#: lpr/matichandler.cpp:421
-#, c-format
-msgid "Unsupported backend: %1."
-msgstr "Nepodržan backend: %1."
+#: kprinterimpl.cpp:355
+msgid "<p>Could not load filter description for <b>%1</b>.</p>"
+msgstr "<p>Greška prilikom čitanja opisa filtera <b>%1</b>.</p>"
 
-#: lpr/matichandler.cpp:426
+#: kprinterimpl.cpp:371
 msgid ""
-"Unable to find executable lpdomatic. Check that Foomatic is correctly installed "
-"and that lpdomatic is installed in a standard location."
+"<p>Error while reading filter description for <b>%1</b>"
+". Empty command line received.</p>"
 msgstr ""
-"Ne mogu da pronađem izvršni lpdomatic. Provjerite da li je Foomatic ispravno "
-"instaliran i da li je lpdomatic instaliran na uobičajenoj lokaciji."
+"<p>Greška prilikom čitanja opisa filtera <b>%1</b>. Primljena je prazna "
+"komandna linija.</p>"
 
-#: lpr/matichandler.cpp:457
-#, c-format
-msgid "Unable to remove driver file %1."
-msgstr "Ne mogu izbrisati drajver datoteku %1."
+#: kprinterimpl.cpp:385
+msgid ""
+"The MIME type %1 is not supported as input of the filter chain (this may happen "
+"with non-CUPS spoolers when performing page selection on a non-PostScript "
+"file). Do you want TDE to convert the file to a supported format?</p>"
+msgstr ""
+"MIME tip %1 nije podržan kao ulaz za lanac filtera (ovo se dešava sa ne-CUPS "
+"spoolerima kada pokušaju izvršiti izbor stranice na ne-PostScript datoteci). "
+"Želite li da TDE pretvori datoteku u neki od podržanih formata?</p>"
 
-#: lpr/editentrydialog.cpp:40
-msgid "Aliases:"
-msgstr "Aliasi:"
+#: kprinterimpl.cpp:389 kprinterimpl.cpp:509
+msgid "Convert"
+msgstr "Pretvori"
 
-#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107
-msgid "String"
-msgstr "Tekst"
+#: kprinterimpl.cpp:399
+msgid "Select MIME Type"
+msgstr "Izaberite MIME tip"
 
-#: lpr/editentrydialog.cpp:47
-msgid "Number"
-msgstr "Broj"
+#: kprinterimpl.cpp:400
+msgid "Select the target format for the conversion:"
+msgstr "Izaberite ciljni format za pretvaranje:"
 
-#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111
-msgid "Boolean"
-msgstr "Booleov izraz"
+#: kprinterimpl.cpp:404 kprinterimpl.cpp:430
+msgid "Operation aborted."
+msgstr "Operacija prekinuta."
 
-#: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50
-msgid "Enabled"
-msgstr "Uključeno"
+#: kprinterimpl.cpp:410
+msgid "No appropriate filter found. Select another target format."
+msgstr "Nije pronađen pogodan filter. Izaberite neki drugi ciljni format."
 
-#: lpr/editentrydialog.cpp:72
-#, c-format
-msgid "Printcap Entry: %1"
-msgstr "Printcap unos: %1"
+#: kprinterimpl.cpp:423
+msgid ""
+"<qt>Operation failed with message:"
+"<br>%1"
+"<br>Select another target format.</qt>"
+msgstr ""
+"<qt>Operacija nije uspjela uz poruku:"
+"<br>%1"
+"<br>Izaberite neki drugi ciljni format.</qt>"
 
-#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97
-msgid "Unknown (unrecognized entry)"
-msgstr "Nepoznato (stavka nije prepoznata)"
+#: kprinterimpl.cpp:441
+msgid "Filtering print data"
+msgstr "Filtriram podatke za štampu"
 
-#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91
-msgid "Remote queue (%1) on %2"
-msgstr "Udaljeni red %1 na %2"
+#: kprinterimpl.cpp:445
+msgid "Error while filtering. Command was: <b>%1</b>."
+msgstr "Greška prilikom filtriranja. Naredba je bila: <b>%1</b>."
 
-#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72
-msgid "Network printer (%1)"
-msgstr "Mrežni štampač (%1)"
+#: kprinterimpl.cpp:487
+msgid "<qt>The print file is empty and will be ignored:<p>%1</p></qt>"
+msgstr "<qt>Datoteka za štampu je prazna i biće ignorisana:<p>%1</p></qt>"
 
-#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116
-msgid "Unrecognized entry."
-msgstr "Nepoznata stavka."
+#: kprinterimpl.cpp:497
+msgid ""
+"<qt>The file format <em> %1 </em> is not directly supported by the current "
+"print system. You now have 3 options: "
+"<ul> "
+"<li> TDE can attempt to convert this file automatically to a supported format. "
+"(Select <em>Convert</em>) </li>"
+"<li> You can try to send the file to the printer without any conversion. "
+"(Select <em>Keep</em>) </li>"
+"<li> You can cancel the printjob. (Select <em>Cancel</em>) </li></ul> "
+"Do you want TDE to attempt and convert this file to %2?</qt>"
+msgstr ""
+"Trenutni sistem štampe ne podržava direktno format datoteke %1. TDE može "
+"pokušati da automatski pretvori ovu datoteku u neki od podržanih formata. "
+"Također možete pokušati poslati datoteku štampaču bez ikakvog pretvaranja. "
+"Želite li da TDE proba pretvoriti ovu datoteku u %2?"
 
-#: lpr/lprngtoolhandler.cpp:99
-msgid "IFHP Driver (%1)"
-msgstr "IFHPdrajver (%1)"
+#: kprinterimpl.cpp:518
+msgid ""
+"<qt>No appropriate filter was found to convert the file format %1 into %2."
+"<br>"
+"<ul>"
+"<li>Go to <i>System Options -> Commands</i> to look through the list of "
+"possible filters. Each filter executes an external program.</li>"
+"<li> See if the required external program is available.on your system.</li></ul>"
+"</qt>"
+msgstr ""
 
-#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170
-msgid "unknown"
-msgstr "nepoznato"
+#. i18n: file kprintpreviewui.rc line 13
+#: rc.cpp:9 rc.cpp:21
+#, no-c-format
+msgid "&PageMarks"
+msgstr "&PageMarks"
 
-#: lpr/lprngtoolhandler.cpp:162
-msgid "No driver defined for that printer. It might be a raw printer."
+#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72
+msgid ""
+"No valid print executable was found in your path. Check your installation."
 msgstr ""
-"Za ovaj štampač nije definisan drajver. Možda je u pitanju sirovi štampač."
+"Nije pronađena ispravna izvršna datoteka za štampu u vašem putu. Provjerite "
+"vašu instalaciju."
 
-#: lpr/lprngtoolhandler.cpp:170
-msgid "LPRngTool Common Driver (%1)"
-msgstr "Uobičajeni LPRngTool drajver (%1)"
+#: lpdunix/kmlpdunixmanager.cpp:210
+msgid "Description unavailable"
+msgstr "Opis nije dostupan"
 
-#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323
+#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271
+#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380
 #, c-format
-msgid "Invalid printer backend specification: %1"
-msgstr "Neispravna specifikacija backenda štampača: %1"
+msgid "Remote printer queue on %1"
+msgstr "Udaljeni red štampe na %1"
 
-#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291
-#: lpr/lpchelper.cpp:314
-msgid "The executable %1 couldn't be found in your PATH."
-msgstr "Izvršna datoteka %1 nije pronađena u vašem PATHu."
+#: kpfilterpage.cpp:42
+msgid ""
+" <qt> <b>Add Filter button</b> "
+"<p>This button calls a little dialog to let you select a filter here. </p> "
+"<p><b>Note 1:</b> You can chain different filters as long as you make  sure "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
+"filtering chain and will warn you if you fail to do so.</p>  "
+"<p><b>Note 2:</b> The filters you define here are applied to your jobfile  <em>"
+"<b>before</b></em> it is handed downstream to your spooler and print  subsystem "
+"(e.g. CUPS, LPRng, LPD).</p> </ul> </qt>"
+msgstr ""
 
-#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298
-msgid "Permission denied."
-msgstr "Pristup odbijen."
+#: kpfilterpage.cpp:54
+msgid ""
+" <qt> <b>Remove Filter button</b> "
+"<p>This button removes the highlighted filter from the list of filters. </qt>"
+msgstr ""
+"<qt>Ovo dugme uklanja istaknutu datoteku iz liste datoteka za štampanje.</qt>"
 
-#: lpr/lpchelper.cpp:259
-msgid "Printer %1 does not exist."
-msgstr "Štampač %1 ne postoji."
+#: kpfilterpage.cpp:59
+msgid ""
+" <qt> <b>Move Filter Up button</b> "
+"<p>This button moves the highlighted filter up in the list of filters, towards "
+"the front of the filtering chain. </p> </qt>"
+msgstr ""
+"<qt>"
+"<p>Ovo dugme pomjera istaknutu datoteku za jedno mesto na gore u listi datoteka "
+"za štampanje.</p>"
+"<p>Prosto rečeno, ovo mijenja redoslijed datoteka za štampanje.</p></qt>"
 
-#: lpr/lpchelper.cpp:263
-#, c-format
-msgid "Unknown error: %1"
-msgstr "Nepoznata greška: %1"
+#: kpfilterpage.cpp:64
+msgid ""
+" <qt> <b>Move Filter Down button</b> "
+"<p>This button moves the highlighted filter down in the list of filters, "
+"towards the end of the filtering chain..</p> </qt>"
+msgstr ""
+"<qt>"
+"<p>Ovo dugme pomjera istaknutu datoteku za jedno mesto na dolje u listi "
+"datoteka za štampanje.</p>"
+"<p>Prosto rečeno, ovo mijenja redoslijed datoteka za štampanje.</p></qt>"
 
-#: lpr/lpchelper.cpp:282
-#, c-format
-msgid "Execution of lprm failed: %1"
-msgstr "Izvršenje lprm-a nije uspjelo: %1"
+#: kpfilterpage.cpp:69
+msgid ""
+" <qt> <b>Configure Filter button</b> "
+"<p>This button lets you configure the currently highlighted filter. It opens a "
+"separate dialog.  </p> </qt>"
+msgstr ""
 
-#: lpr/apshandler.cpp:68
-msgid "APS Driver (%1)"
-msgstr "APS drajver (%1)"
+#: kpfilterpage.cpp:75
+msgid ""
+" <qt> <b>Filter Info Pane</b> "
+"<p>This field shows some general info about the selected filter.  Amongst them "
+"are:  "
+"<ul>  "
+"<li>the <em>filter name</em> (as displayed in the TDEPrint user interface); "
+"</li>  "
+"<li>the <em>filter requirements</em> (that is the external program that needs  "
+"to present and executable on this system); </li>  "
+"<li>the <em>filter input format</em> (in the form of one or several <em>"
+"MIME types</em> accepted by the filter); </li>  "
+"<li>the <em>filter output format</em> (in the form of a <em>MIME type</em>  "
+"generated by the filter); </li>  "
+"<li>a more or less verbose text describing the filter's operation.</li>  </ul>  "
+"</p> </qt>"
+msgstr ""
 
-#: lpr/apshandler.cpp:221
-#, c-format
-msgid "Unable to create directory %1."
-msgstr "Ne mogu da napravim direktorij %1."
+#: kpfilterpage.cpp:91
+msgid ""
+" <qt> <b>Filtering Chain</b> (if enabled, is run <em>before</em> "
+"actual  job submission to print system) "
+"<p>This field shows which filters are currently selected to act as "
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files <em>"
+"before</em> they are  send downstream to your real print subsystem. </p>  "
+"<p>The list shown in this field may be empty (default). </p>  "
+"<p>The pre-filters act on the printjob in the order they are listed (from top "
+"to bottom).  This is done by acting as a <em>filtering chain</em> "
+"where the output of one filter  acts as input to the next. By putting the "
+"filters into the wrong order, you can make  the filtering chain fail. For "
+"example: if your file is ASCII text, and you want the  output being processed "
+"by the 'Multipage per Sheet' filter, the first filter must be  one that "
+"processes ASCII into PostScript. </p>  "
+"<p>TDEPrint can utilize <em>any</em> external filtering program which you may "
+"find useful  through this interface. </p>  "
+"<p>TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work <em>for all</em> print subsystems supported by TDEPrint (such "
+"as CUPS, LPRng and LPD), because they are not depending on these.</p> ."
+"<p> Amongst the pre-configured filters shipping with TDEPrint are: </p>  "
+"<ul>  "
+"<li>the <em>Enscript text filter</em>  </li>  "
+"<li>a <em>Multiple Pages per Sheet filter</em </li>  "
+"<li>a <em>PostScript to PDF converter</em>.</li>  "
+"<li>a <em>Page Selection/Ordering filter</em>.</li>  "
+"<li>a <em>Poster Printing filter</em>.</li>  "
+"<li>and some more..</li>  </ul>  To insert a filter into this list, simply "
+"click on the <em>funnel</em> icon (topmost on  the right icon column group) and "
+"proceed. </p> "
+"<p>Please click on the other elements of this dialog to learn more about the "
+"TDEPrint  pre-filters.  </p> </qt>"
+msgstr ""
 
-#: lpr/apshandler.cpp:241
-#, c-format
-msgid "Missing element: %1."
-msgstr "Nedostajući element: %1."
+#: kpfilterpage.cpp:125
+msgid "Filters"
+msgstr "Filteri"
 
-#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367
-#, c-format
-msgid "Unable to create the file %1."
-msgstr "Ne mogu da napravim datoteku %1."
+#: kpfilterpage.cpp:141
+msgid "Add filter"
+msgstr "Dodaj filter"
 
-#: lpr/apshandler.cpp:322
-msgid "The APS driver is not defined."
-msgstr "APS drajver nije definisan."
+#: kpfilterpage.cpp:146
+msgid "Remove filter"
+msgstr "Ukloni filter"
 
-#: lpr/apshandler.cpp:380
+#: kpfilterpage.cpp:151
+msgid "Move filter up"
+msgstr "Pomjeri filter gore"
+
+#: kpfilterpage.cpp:156
+msgid "Move filter down"
+msgstr "Pomjeri filter dole"
+
+#: kpfilterpage.cpp:161
+msgid "Configure filter"
+msgstr "Podesi filter"
+
+#: kpfilterpage.cpp:279
+msgid "Internal error: unable to load filter."
+msgstr "Interna greška: ne mogu otvoriti filter."
+
+#: kpfilterpage.cpp:394
+msgid ""
+"<p>The filter chain is wrong. The output format of at least one filter is not "
+"supported by its follower. See <b>Filters</b> tab for more information.</p>"
+msgstr ""
+"<p>Lanac filtera je pogrešan. Izlazni format makar jednog od filtera nije "
+"podržan kao ulaz njegovog sljedbenika. Pogledajte list <b>Filteri</b> "
+"za više informacija.</p>"
+
+#: kpfilterpage.cpp:408
+msgid "Input"
+msgstr "Ulaz"
+
+#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217
+msgid "Output"
+msgstr "Izlaz"
+
+#: kpfileselectpage.cpp:33
+msgid "&Files"
+msgstr "&Datoteke"
+
+#: kprintpreview.cpp:140
+msgid "Do you want to continue printing anyway?"
+msgstr "Da li želite svejedno nastaviti sa štampanjem?"
+
+#: kprintpreview.cpp:148 kprintpreview.cpp:227
+msgid "Print Preview"
+msgstr "Pregled prije ispisa"
+
+#: kprintpreview.cpp:278
+msgid ""
+"The preview program %1 cannot be found. Check that the program is correctly "
+"installed and located in a directory included in your PATH environment "
+"variable."
+msgstr ""
+"Nisam mogao pronaći program za pregled <b>%1</b>. Provjerite da li je ovaj "
+"program ispravno instaliran i smješten u direktoriju koji je uključen u vašu <b>"
+"PATH</b> promjenljivu."
+
+#: kprintpreview.cpp:303
+msgid ""
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
+"other external PostScript viewer could be found."
+msgstr ""
+"Pregled nije uspio: nije pronađen niti interni TDE PostScript preglednik "
+"(KGhostView), niti bilo koji drugi vanjski PostScript preglednik."
+
+#: kprintpreview.cpp:307
 #, c-format
-msgid "Unable to remove directory %1."
-msgstr "Ne mogu da pobrišem direktorij %1."
+msgid ""
+"Preview failed: TDE could not find any application to preview files of type %1."
+msgstr ""
+"Pregled nije uspio: TDE ne može naći nijednu aplikaciju za pregledanje datoteka "
+"tipa %1."
 
-#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54
-msgid "Driver Settings"
-msgstr "Postavke drajvera"
+#: kprintpreview.cpp:317
+#, c-format
+msgid "Preview failed: unable to start program %1."
+msgstr "Pregled nije uspio: ne mogu pokrenuti %1."
+
+#: kprintpreview.cpp:322
+msgid "Do you want to continue printing?"
+msgstr "Da li želite nastaviti sa štampom?"
 
 #: kpdriverpage.cpp:48
 #, fuzzy
@@ -716,38 +3335,305 @@ msgstr ""
 "<qt>Neke od izabranih opcija su u konfliktu. Morate razriješiti te konflikte "
 "prije nastavka. Pogledajte list <b>Napredno</b> za detaljne informacije.</qt>"
 
-#: posterpreview.cpp:115
-#, fuzzy
+#: cups/kpimagepage.cpp:44
 msgid ""
-"Poster preview not available. Either the <b>poster</b> "
-"executable is not properly installed, or you don't have the required version"
+" <qt>  "
+"<p><b>Brightness:</b> Slider to control the brightness value of all colors "
+"used.</p> "
+"<p> The brightness value can range from 0 to 200. Values greater than 100 will  "
+"lighten the print. Values less than 100 will darken the print. </p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o brightness=...      # use range from \"0\" to \"200\"  </pre>  </p>  "
+"</qt>"
 msgstr ""
-"Pregled postera nije dostupan. Ili <b>poster</b> izvršna datoteka nije ispravno "
-"instalirana ili nemate odgovarajuću verziju."
 
-#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45
-msgid "Margins"
-msgstr "Margine"
+#: cups/kpimagepage.cpp:58
+msgid ""
+" <qt>  "
+"<p><b>Hue (Tint):</b> Slider to control the hue value for color rotation.</p> "
+"<p> The hue value is a number from -360 to 360 and represents the color hue "
+"rotation.  The following table summarizes the change you will see for the base "
+"colors:  "
+"<center>  <table border=\"1\" width=\"70%\">  "
+"<tr>"
+"<th><b>Original</b></th> "
+"<th><b>hue=-45</b></th> "
+"<th><b>hue=45</b></th>   </tr>  "
+"<tr>"
+"<td>Red</td>             "
+"<td>Purple</td>         "
+"<td>Yellow-orange</td>   </tr>  "
+"<tr>"
+"<td>Green</td>           "
+"<td>Yellow-green</td>   "
+"<td>Blue-green</td>      </tr>  "
+"<tr>"
+"<td>Yellow</td>          "
+"<td>Orange</td>         "
+"<td>Green-yellow</td>    </tr>  "
+"<tr>"
+"<td>Blue</td>            "
+"<td>Sky-blue</td>       "
+"<td>Purple</td>          </tr>  "
+"<tr>"
+"<td>Magenta</td>         "
+"<td>Indigo</td>         "
+"<td>Crimson</td>         </tr>  "
+"<tr>"
+"<td>Cyan</td>            "
+"<td>Blue-green</td>     "
+"<td>Light-navy-blue</td> </tr>  </table>  </center>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o hue=...     # use range from \"-360\" to \"360\"  </pre> </p>  </qt>"
+msgstr ""
 
-#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39
-msgid "Users"
-msgstr "Korisnici"
+#: cups/kpimagepage.cpp:83
+msgid ""
+" <qt>  "
+"<p><b>Saturation:</b> Slider to control the saturation value for all colors "
+"used.</p> "
+"<p> The saturation value adjusts the saturation of the colors in an image, "
+"similar to  the color knob on your television. The color saturation value.can "
+"range from 0 to 200. On inkjet printers, a higher saturation value uses more "
+"ink. On laserjet printers, a  higher saturation uses more toner.  A color "
+"saturation of 0 produces a black-and-white print, while a value of 200 will  "
+"make the colors extremely intense. </p> "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o saturation=...      # use range from \"0\" to \"200\"  </pre> </p>  "
+"</qt>"
+msgstr ""
 
-#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36
-msgid "Users Access Settings"
-msgstr "Postavke pristupa korisnika"
+#: cups/kpimagepage.cpp:101
+msgid ""
+" <qt>  "
+"<p><b>Gamma:</b> Slider to control the gamma value for color correction.</p> "
+"<p> The gamma value can range from 1 to 3000.  A gamma values greater than 1000 "
+"lightens the print. A gamma value less than 1000  darken the print. The default "
+"gamma is 1000. </p> "
+"<p><b>Note:</b></p> the gamma value adjustment is not visible in the thumbnail  "
+"preview. </p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o gamma=...      # use range from \"1\" to \"3000\"  </pre> </p>  "
+"</qt>"
+msgstr ""
 
-#: cups/kmpropusers.cpp:55
-msgid "Denied users"
-msgstr "Odbijeni korisnici"
+#: cups/kpimagepage.cpp:118
+msgid ""
+" <qt>  "
+"<p><b>Image Printing Options</b></p>  "
+"<p>All options controlled on this page only apply to printing images.  Most "
+"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF,  PNM "
+"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color "
+"output of image printouts are:  "
+"<ul>  "
+"<li> Brightness  </li> "
+"<li> Hue         </li> "
+"<li> Saturation  </li> "
+"<li> Gamma       </li> </ul>  "
+"<p>For a more detailed explanation about Brightness, Hue, Saturation and Gamma "
+"settings, please  look at the 'WhatsThis' items provided for these controls.  "
+"</p>  </p>  </qt>"
+msgstr ""
 
-#: cups/kmpropusers.cpp:62
-msgid "Allowed users"
-msgstr "Odobreni korisnici"
+#: cups/kpimagepage.cpp:136
+msgid ""
+" <qt>  "
+"<p><b>Coloration Preview Thumbnail</b></p>  "
+"<p>The coloration preview thumbnail indicates change of image coloration by "
+"different settings.  Options to influence output are:  "
+"<ul>  "
+"<li> Brightness  </li> "
+"<li> Hue (Tint)  </li> "
+"<li> Saturation  </li> "
+"<li> Gamma       </li> </ul>  </p>  "
+"<p>For a more detailed explanation about Brightness, Hue, Saturation and Gamma "
+"settings, please  look at the 'WhatsThis' items provided for these controls.  "
+"</p>  </qt>"
+msgstr ""
 
-#: cups/kmpropusers.cpp:76
-msgid "All users allowed"
-msgstr "Svi korisnici su odobreni"
+#: cups/kpimagepage.cpp:152
+msgid ""
+" <qt>  "
+"<p><b>Image Size:</b> Dropdown menu to control the image size on the printed "
+"paper. Dropdown  works in conjunction with slider below. Dropdown options "
+"are:.</p> "
+"<ul>  "
+"<li> <b>Natural Image Size:</b> Image prints in its natural image size. If it "
+"does not fit onto  one sheet, the printout will be spread across multiple "
+"sheets. Note, that the slider is disabled  when selecting 'natural image size' "
+"in the dropdown menu. </li> "
+"<li> <b>Resolution (ppi):</b> The resolution value slider covers a number range "
+"from 1 to 1200.  It specifies the resolution of the image in Pixels Per Inch "
+"(PPI). An image that is 3000x2400 pixels  will print 10x8 inches at 300 pixels "
+"per inch, for example, but 5x4 inches at 600 pixels per inch. If the specified "
+"resolution makes the image larger than the page, multiple pages will be "
+"printed.  Resolution defaults to 72 ppi.  </li> "
+"<li> <b>% of Page Size:</b> The percent value slider covers numbers from 1 to "
+"800. It specifies the size  in relation to the page (not the image). A scaling "
+"of 100 percent will fill the page as completely  as the image aspect ratio "
+"allows (doing auto-rotation of the image as needed).  A scaling of more than "
+"100 will print the image across multiple  sheets. A scaling of 200 percent will "
+"print on up to 4 pages. </li> Scaling in % of page size defaults to 100 %.  "
+"<li> <b>% of Natural Image Size:</b> The percent value slider moves from 1 to "
+"800. It specifies  the printout size in relation  to the natural image size. A "
+"scaling of 100 percent will print the image at its natural size, while a  "
+"scaling of 50 percent will print the image at half its natural size. If the "
+"specified scaling makes  the image larger than the page, multiple pages will be "
+"printed.  Scaling in % of natural image size defaults to 100 %.  </ul>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>     -o natural-scaling=...     # range in  %  is 1....800  "
+"<br>     -o scaling=...             # range in  %  is 1....800  "
+"<br>     -o ppi=...                 # range in ppi is 1...1200  </pre> </p>  "
+"</qt>"
+msgstr ""
+
+#: cups/kpimagepage.cpp:192
+msgid ""
+" <qt>  "
+"<p><b>Position Preview Thumbnail</b></p>  "
+"<p>This position preview thumbnail indicates the position of the image on the "
+"paper sheet.  "
+"<p>Click on horizontal and vertical radio buttons to move image alignment on "
+"paper around. Options are:  "
+"<ul>  "
+"<li> center      </li> "
+"<li> top         </li> "
+"<li> top-left    </li> "
+"<li> left        </li> "
+"<li> bottom-left </li> "
+"<li> bottom      </li> "
+"<li> bottom-right</li> "
+"<li> right       </li> "
+"<li> top-right   </li> </ul>  </p>  </qt>"
+msgstr ""
+
+#: cups/kpimagepage.cpp:210
+msgid ""
+" <qt>  "
+"<p><b>Reset to Default Values</b> </p>  "
+"<p> Reset all coloration settings to default values. Default values are:  "
+"<ul>  "
+"<li> Brightness: 100 </li> "
+"<li> Hue (Tint).   0 </li> "
+"<li> Saturation: 100 </li> "
+"<li> Gamma:     1000 </li> </ul>  </p>  </qt>"
+msgstr ""
+
+#: cups/kpimagepage.cpp:222
+msgid ""
+" <qt>  "
+"<p><b>Image Positioning:</b></p>  "
+"<p>Select a pair of radiobuttons to  move image to the position you want on the "
+"paper printout. Default  is 'center'. </p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o position=...       # examples: \"top-left\" or \"bottom\"  </pre> "
+"</p>  </qt>"
+msgstr ""
+
+#: cups/kpimagepage.cpp:237
+msgid "Image"
+msgstr "Slika"
+
+#: cups/kpimagepage.cpp:239
+msgid "Color Settings"
+msgstr "Postavke boje"
+
+#: cups/kpimagepage.cpp:241
+msgid "Image Size"
+msgstr "Veličina slike"
+
+#: cups/kpimagepage.cpp:243
+msgid "Image Position"
+msgstr "Položaj slike"
+
+#: cups/kpimagepage.cpp:247
+msgid "&Brightness:"
+msgstr "&Osvjetljenost:"
+
+#: cups/kpimagepage.cpp:252
+msgid "&Hue (Color rotation):"
+msgstr "&Hue (rotacija boja):"
+
+#: cups/kpimagepage.cpp:257
+msgid "&Saturation:"
+msgstr "&Saturation:"
+
+#: cups/kpimagepage.cpp:262
+msgid "&Gamma (Color correction):"
+msgstr "&Gamma (ispravka boje):"
+
+#: cups/kpimagepage.cpp:283
+msgid "&Default Settings"
+msgstr "&Uobičajene vrijednosti"
+
+#: cups/kpimagepage.cpp:289
+msgid "Natural Image Size"
+msgstr "Stvarna veličina slike"
+
+#: cups/kpimagepage.cpp:290
+msgid "Resolution (ppi)"
+msgstr "Rezolucija (ppi)"
+
+#: cups/kpimagepage.cpp:292
+#, no-c-format
+msgid "% of Page"
+msgstr "% stranice"
+
+#: cups/kpimagepage.cpp:294
+#, no-c-format
+msgid "% of Natural Image Size"
+msgstr "% prirodne veličine slike"
+
+#: cups/kpimagepage.cpp:304
+msgid "&Image size type:"
+msgstr "&Vrsta veličine slike:"
+
+#: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96
+msgid "&Period:"
+msgstr "&Period:"
+
+#: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97
+msgid "&Size limit (KB):"
+msgstr "&Ograničenje veličine (KB):"
+
+#: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98
+msgid "&Page limit:"
+msgstr "&Ograničenje stranica:"
+
+#: cups/kmpropquota.cpp:57
+msgid "Quotas"
+msgstr "Kvote"
+
+#: cups/kmpropquota.cpp:58
+msgid "Quota Settings"
+msgstr "Postavke kvota"
+
+#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84
+msgid "No quota"
+msgstr "Bez kvote"
+
+#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87
+#: cups/kmwquota.cpp:90
+msgid "None"
+msgstr "Nijedan"
 
 #: cups/kptextpage.cpp:41
 msgid ""
@@ -962,111 +3848,6 @@ msgstr "&Isključeno"
 msgid "&Enabled"
 msgstr "&Uključeno"
 
-#: cups/kmconfigcups.cpp:32
-msgid "CUPS Server"
-msgstr "CUPS server"
-
-#: cups/kmconfigcups.cpp:33
-msgid "CUPS Server Settings"
-msgstr "Postavke CUPS servera"
-
-#: cups/kphpgl2page.cpp:33
-msgid ""
-" <qt>  <b>Print in Black Only (Blackplot)</b>  "
-"<p>The 'blackplot' option specifies that all pens should plot in black-only: "
-"The default is to use the colors defined in the plot file, or the standard  pen "
-"colors defined in the HP-GL/2 reference manual from Hewlett Packard. </p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o blackplot=true  </pre>  </p>  </qt>"
-msgstr ""
-
-#: cups/kphpgl2page.cpp:48
-msgid ""
-" <qt>  <b>Scale Print Image to Page Size</b>  "
-"<p>The 'fitplot' option specifies that the HP-GL image should be scaled to fill "
-" exactly the page with the (elsewhere selected) media size. </p>  "
-"<p>The default is 'fitplot is disabled'. The default will therefore use the "
-"absolute  distances specified in the plot file. (You should be aware that HP-GL "
-"files are very  often CAD drawings intended for large format plotters. On "
-"standard office printers  they will therefore lead to the drawing printout "
-"being spread across multiple pages.) </p>  "
-"<p><b>Note:</b>This feature depends upon an accurate plot size (PS) command in "
-"the  HP-GL/2 file. If no plot size is given in the file the filter converting "
-"the HP-GL  to PostScript assumes the plot is ANSI E size. </p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches with the CUPS commandline job option parameter:</em>  "
-"<pre>     -o fitplot=true   </pre> </p>  </qt>"
-msgstr ""
-
-#: cups/kphpgl2page.cpp:68
-msgid ""
-" <qt>  <b>Set Pen Width for HP-GL (if not defined in file)</b>.  "
-"<p>The pen width value can be set here in case the original HP-GL file does not "
-"have it  set. The pen width specifies the value in micrometers. The default "
-"value of 1000 produces  lines that are 1000 micrometers == 1 millimeter in "
-"width. Specifying a pen width of 0  produces lines that are exactly 1 pixel "
-"wide. </p>  "
-"<p><b>Note:</b> The penwidth option set here is ignored if the pen widths are "
-"set inside  the plot file itself..</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o penwidth=...   # example: \"2000\" or \"500\"  </pre> </p>  </qt>"
-msgstr ""
-
-#: cups/kphpgl2page.cpp:85
-msgid ""
-" <qt>  <b>HP-GL Print Options</b>  "
-"<p>All options on this page are only applicable if you use TDEPrint to send "
-"HP-GL and  HP-GL/2 files to one of your printers. </p>  "
-"<p>HP-GL and HP-GL/2 are page description languages developed by "
-"Hewlett-Packard to drive  Pen Plotting devices. </p>  "
-"<p>TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
-"it  on any installed printer. </p>  "
-"<p><b>Note 1:</b> To print HP-GL files, start 'kprinter' and simply load the "
-"file into  the running kprinter.</p> "
-"<p><b>Note 2:</b> The 'fitplot' parameter provided on this dialog does also "
-"work for  printing PDF files (if your CUPS version is more recent than "
-"1.1.22).</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> These TDEPrint GUI elements "
-"match with CUPS commandline job option parameters:</em>  "
-"<pre>     -o blackplot=...  # examples: \"true\" or \"false\"  "
-"<br>     -o fitplot=...    # examples: \"true\" or \"false\"  "
-"<br>     -o penwidth=...   # examples: \"true\" or \"false\"  </pre> </p>  </qt>"
-msgstr ""
-
-#: cups/kphpgl2page.cpp:113
-msgid "HP-GL/2 Options"
-msgstr "HP-GL/2 postavke"
-
-#: cups/kphpgl2page.cpp:115
-msgid "&Use only black pen"
-msgstr "&Koristi samo crnu tintu"
-
-#: cups/kphpgl2page.cpp:118
-msgid "&Fit plot to page"
-msgstr "&Podesi plot prema stranici"
-
-#: cups/kphpgl2page.cpp:122
-msgid "&Pen width:"
-msgstr "&Širina olovke:"
-
-#: cups/kmwippselect.cpp:38
-msgid "Remote IPP Printer Selection"
-msgstr "Izbor udaljenog IPP štampača"
-
-#: cups/kmwippselect.cpp:51
-msgid "You must select a printer."
-msgstr "Morate odabrati štampač."
-
 #: cups/kmcupsuimanager.cpp:87
 msgid ""
 "<qt>"
@@ -1175,37 +3956,178 @@ msgstr "Prioritet"
 msgid "Billing Information"
 msgstr "Informacija za naplatu"
 
-#: cups/kmconfigcupsdir.cpp:34
-msgid "Folder"
-msgstr "Direktorij"
+#: cups/ipprequest.cpp:164
+msgid "You don't have access to the requested resource."
+msgstr "Nemate ovlasti za pisanje u traženi resurs."
 
-#: cups/kmconfigcupsdir.cpp:35
-msgid "CUPS Folder Settings"
-msgstr "Postavke CUPS direktorija"
+#: cups/ipprequest.cpp:167
+msgid "You are not authorized to access the requested resource."
+msgstr "Niste autorizovani za pristup traženom resursu."
 
-#: cups/kmconfigcupsdir.cpp:38
-msgid "Installation Folder"
-msgstr "Instalacioni direktorij"
+#: cups/ipprequest.cpp:170
+msgid "The requested operation cannot be completed."
+msgstr "Tražena operacija nije mogla biti završena."
 
-#: cups/kmconfigcupsdir.cpp:41
-msgid "Standard installation (/)"
-msgstr "Standardna instalacija (/)"
+#: cups/ipprequest.cpp:173
+msgid "The requested service is currently unavailable."
+msgstr "Traženi servis trenutno nije dostupan."
 
-#: cups/kmwusers.cpp:41
-msgid "Allowed Users"
-msgstr "Odobreni korisnici"
+#: cups/ipprequest.cpp:176
+msgid "The target printer is not accepting print jobs."
+msgstr "Ciljni štampač ne prima nove zadatke."
 
-#: cups/kmwusers.cpp:42
-msgid "Denied Users"
-msgstr "Odbijeni korisnici"
+#: cups/ipprequest.cpp:313
+msgid ""
+"Connection to CUPS server failed. Check that the CUPS server is correctly "
+"installed and running."
+msgstr ""
+"Spajanje na CUPS server nije uspjelo. Provjerite da li je CUPS server ispravno "
+"instaliran i pokrenut."
 
-#: cups/kmwusers.cpp:44
-msgid "Define here a group of allowed/denied users for this printer."
-msgstr "Ovdje definišite grupu odobrenih/odbijenih korisnika za ovaj štampač."
+#: cups/ipprequest.cpp:316
+msgid "The IPP request failed for an unknown reason."
+msgstr "IPP zahtjev nije uspio iz nepoznatog razloga."
 
-#: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117
-msgid "&Type:"
-msgstr "&Vrsta:"
+#: cups/ipprequest.cpp:461
+msgid "Attribute"
+msgstr "Atribut"
+
+#: cups/ipprequest.cpp:462
+msgid "Values"
+msgstr "Vrijednosti"
+
+#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
+msgid "True"
+msgstr "Tačno"
+
+#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
+msgid "False"
+msgstr "Netačno"
+
+#: cups/kmwfax.cpp:39
+msgid "Fax Serial Device"
+msgstr "Fax serijski uređaj"
+
+#: cups/kmwfax.cpp:43
+msgid "<p>Select the device which your serial Fax/Modem is connected to.</p>"
+msgstr "<p>Odaberite uređaj gdje je vaš serijski Fax/Modem spojen.</p>"
+
+#: cups/kmwfax.cpp:81
+msgid "You must select a device."
+msgstr "Morate odabrati uređaj."
+
+#: cups/kphpgl2page.cpp:33
+msgid ""
+" <qt>  <b>Print in Black Only (Blackplot)</b>  "
+"<p>The 'blackplot' option specifies that all pens should plot in black-only: "
+"The default is to use the colors defined in the plot file, or the standard  pen "
+"colors defined in the HP-GL/2 reference manual from Hewlett Packard. </p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o blackplot=true  </pre>  </p>  </qt>"
+msgstr ""
+
+#: cups/kphpgl2page.cpp:48
+msgid ""
+" <qt>  <b>Scale Print Image to Page Size</b>  "
+"<p>The 'fitplot' option specifies that the HP-GL image should be scaled to fill "
+" exactly the page with the (elsewhere selected) media size. </p>  "
+"<p>The default is 'fitplot is disabled'. The default will therefore use the "
+"absolute  distances specified in the plot file. (You should be aware that HP-GL "
+"files are very  often CAD drawings intended for large format plotters. On "
+"standard office printers  they will therefore lead to the drawing printout "
+"being spread across multiple pages.) </p>  "
+"<p><b>Note:</b>This feature depends upon an accurate plot size (PS) command in "
+"the  HP-GL/2 file. If no plot size is given in the file the filter converting "
+"the HP-GL  to PostScript assumes the plot is ANSI E size. </p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter:</em>  "
+"<pre>     -o fitplot=true   </pre> </p>  </qt>"
+msgstr ""
+
+#: cups/kphpgl2page.cpp:68
+msgid ""
+" <qt>  <b>Set Pen Width for HP-GL (if not defined in file)</b>.  "
+"<p>The pen width value can be set here in case the original HP-GL file does not "
+"have it  set. The pen width specifies the value in micrometers. The default "
+"value of 1000 produces  lines that are 1000 micrometers == 1 millimeter in "
+"width. Specifying a pen width of 0  produces lines that are exactly 1 pixel "
+"wide. </p>  "
+"<p><b>Note:</b> The penwidth option set here is ignored if the pen widths are "
+"set inside  the plot file itself..</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o penwidth=...   # example: \"2000\" or \"500\"  </pre> </p>  </qt>"
+msgstr ""
+
+#: cups/kphpgl2page.cpp:85
+msgid ""
+" <qt>  <b>HP-GL Print Options</b>  "
+"<p>All options on this page are only applicable if you use TDEPrint to send "
+"HP-GL and  HP-GL/2 files to one of your printers. </p>  "
+"<p>HP-GL and HP-GL/2 are page description languages developed by "
+"Hewlett-Packard to drive  Pen Plotting devices. </p>  "
+"<p>TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"it  on any installed printer. </p>  "
+"<p><b>Note 1:</b> To print HP-GL files, start 'kprinter' and simply load the "
+"file into  the running kprinter.</p> "
+"<p><b>Note 2:</b> The 'fitplot' parameter provided on this dialog does also "
+"work for  printing PDF files (if your CUPS version is more recent than "
+"1.1.22).</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> These TDEPrint GUI elements "
+"match with CUPS commandline job option parameters:</em>  "
+"<pre>     -o blackplot=...  # examples: \"true\" or \"false\"  "
+"<br>     -o fitplot=...    # examples: \"true\" or \"false\"  "
+"<br>     -o penwidth=...   # examples: \"true\" or \"false\"  </pre> </p>  </qt>"
+msgstr ""
+
+#: cups/kphpgl2page.cpp:113
+msgid "HP-GL/2 Options"
+msgstr "HP-GL/2 postavke"
+
+#: cups/kphpgl2page.cpp:115
+msgid "&Use only black pen"
+msgstr "&Koristi samo crnu tintu"
+
+#: cups/kphpgl2page.cpp:118
+msgid "&Fit plot to page"
+msgstr "&Podesi plot prema stranici"
+
+#: cups/kphpgl2page.cpp:122
+msgid "&Pen width:"
+msgstr "&Širina olovke:"
+
+#: cups/kmcupsconfigwidget.cpp:65
+msgid "Server Information"
+msgstr "Informacije o serveru"
+
+#: cups/kmcupsconfigwidget.cpp:66
+msgid "Account Information"
+msgstr "Inofmacije o računu (account)"
+
+#: cups/kmcupsconfigwidget.cpp:75
+msgid "&User:"
+msgstr "&Korisnik:"
+
+#: cups/kmcupsconfigwidget.cpp:76
+msgid "Pass&word:"
+msgstr "&Šifra:"
+
+#: cups/kmcupsconfigwidget.cpp:79
+msgid "&Store password in configuration file"
+msgstr "&Snimi šifru u datoteku sa postavkama"
+
+#: cups/kmcupsconfigwidget.cpp:81
+msgid "Use &anonymous access"
+msgstr "Koristi &anonimni pristup"
 
 #: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363
 msgid "&Export"
@@ -1223,10 +4145,6 @@ msgstr "&Korisničko ime:"
 msgid "&Samba server:"
 msgstr "&Samba server:"
 
-#: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50
-msgid "&Password:"
-msgstr "Ši&fra:"
-
 #: cups/cupsaddsmb2.cpp:79
 msgid ""
 "<p><b>Samba server</b></p>Adobe Windows PostScript driver files plus the CUPS "
@@ -1351,10 +4269,6 @@ msgstr ""
 msgid "Preparing to upload driver to host %1"
 msgstr "Pripremam slanje drajvera na računar %1"
 
-#: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149
-msgid "&Abort"
-msgstr "&Prekini"
-
 #: cups/cupsaddsmb2.cpp:415
 msgid "The driver for printer <b>%1</b> could not be found."
 msgstr "Nisam mogao naći drajver za štampač <b>%1</b>."
@@ -1364,103 +4278,111 @@ msgstr "Nisam mogao naći drajver za štampač <b>%1</b>."
 msgid "Preparing to install driver on host %1"
 msgstr "Pripremam instalaciju drajvera na računaru %1"
 
-#: cups/kmwquota.cpp:46
-msgid "second(s)"
-msgstr "sekundi"
+#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36
+msgid "Users Access Settings"
+msgstr "Postavke pristupa korisnika"
 
-#: cups/kmwquota.cpp:47
-msgid "minute(s)"
-msgstr "minuta"
+#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39
+msgid "Users"
+msgstr "Korisnici"
 
-#: cups/kmwquota.cpp:48
-msgid "hour(s)"
-msgstr "sati"
+#: cups/kmwusers.cpp:41
+msgid "Allowed Users"
+msgstr "Odobreni korisnici"
 
-#: cups/kmwquota.cpp:49
-msgid "day(s)"
-msgstr "dana"
+#: cups/kmwusers.cpp:42
+msgid "Denied Users"
+msgstr "Odbijeni korisnici"
 
-#: cups/kmwquota.cpp:50
-msgid "week(s)"
-msgstr "sedmica"
+#: cups/kmwusers.cpp:44
+msgid "Define here a group of allowed/denied users for this printer."
+msgstr "Ovdje definišite grupu odobrenih/odbijenih korisnika za ovaj štampač."
 
-#: cups/kmwquota.cpp:51
-msgid "month(s)"
-msgstr "mjeseci"
+#: cups/kmwippprinter.cpp:45
+msgid "IPP Printer Information"
+msgstr "IPP informacije o štampaču"
 
-#: cups/kmwquota.cpp:79
-msgid "Printer Quota Settings"
-msgstr "Postavke kvote štampača"
+#: cups/kmwippprinter.cpp:55
+msgid "&Printer URI:"
+msgstr "&URI štampača:"
 
-#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84
-msgid "No quota"
-msgstr "Bez kvote"
+#: cups/kmwippprinter.cpp:64
+msgid ""
+"<p>Either enter the printer URI directly, or use the network scanning "
+"facility.</p>"
+msgstr ""
+"<p>Ili unesite direktno URI štampača, ili koristite pogodnost pretraživanja "
+"mreže.</p>"
 
-#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87
-#: cups/kmwquota.cpp:90
-msgid "None"
-msgstr "Nijedan"
+#: cups/kmwippprinter.cpp:65
+msgid "&IPP Report"
+msgstr "IPP izvještaj"
 
-#: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96
-msgid "&Period:"
-msgstr "&Period:"
+#: cups/kmwippprinter.cpp:112
+msgid "You must enter a printer URI."
+msgstr "Morate unijeti URI štampača."
 
-#: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97
-msgid "&Size limit (KB):"
-msgstr "&Ograničenje veličine (KB):"
+#: cups/kmwippprinter.cpp:173
+msgid "<b>Name</b>: %1<br>"
+msgstr "<b>Ime</b>: %1<br>"
 
-#: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98
-msgid "&Page limit:"
-msgstr "&Ograničenje stranica:"
+#: cups/kmwippprinter.cpp:174
+msgid "<b>Location</b>: %1<br>"
+msgstr "<b>Lokacija</b>: %1<br>"
 
-#: cups/kmwquota.cpp:104
-msgid ""
-"<p>Set here the quota for this printer. Using limits of <b>0</b> "
-"means that no quota will be used. This is equivalent to set quota period to <b>"
-"<nobr>No quota</nobr></b> (-1). Quota limits are defined on a per-user base and "
-"applied to all users.</p>"
-msgstr ""
-"<p>Ovdje postavljate kvotu za ovaj štampač. Ako zadate ograničenje <b>0</b> "
-"to znači da se neće koristiti kvota. Ovo je ekvivivalentno postavljaju perioda "
-"kvote na <b><nobr>Bez kvote</nobr></b> (-1). Ograničenja kvote se definišu na "
-"nivou korisnika, a primijenjuju se na sve korisnike.</p>"
+#: cups/kmwippprinter.cpp:175
+msgid "<b>Description</b>: %1<br>"
+msgstr "<b>Opis</b>: %1<br>"
 
-#: cups/kmwquota.cpp:130
-msgid "You must specify at least one quota limit."
-msgstr "Morate makar navesti jedno ograničenje kvote."
+#: cups/kmwippprinter.cpp:182
+msgid "<b>Model</b>: %1<br>"
+msgstr "<b>Model</b>: %1<br>"
 
-#: cups/kmcupsconfigwidget.cpp:65
-msgid "Server Information"
-msgstr "Informacije o serveru"
+#: cups/kmwippprinter.cpp:192
+msgid "<b>State</b>: %1<br>"
+msgstr "<b>Status</b>: %1<br>"
 
-#: cups/kmcupsconfigwidget.cpp:66
-msgid "Account Information"
-msgstr "Inofmacije o računu (account)"
+#: cups/kmwippprinter.cpp:199
+#, c-format
+msgid "Unable to retrieve printer info. Printer answered:<br><br>%1"
+msgstr ""
+"Ne mogu dobaviti informacije o štampaču. Štampač je odgovorio:"
+"<br>"
+"<br>%1"
 
-#: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34
-msgid "&Host:"
-msgstr "&Računar:"
+#: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218
+#, c-format
+msgid "IPP Report for %1"
+msgstr "IPP izvještaj za %1"
 
-#: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53
-#: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35
-msgid "&Port:"
-msgstr "&Port:"
+#: cups/kmwippprinter.cpp:222
+msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)."
+msgstr ""
+"Ne mogu generisati izvještaj. IPP zahtjev nije uspio uz poruku: %1 (0x%2)."
 
-#: cups/kmcupsconfigwidget.cpp:75
-msgid "&User:"
-msgstr "&Korisnik:"
+#: cups/kmwipp.cpp:35
+msgid "Remote IPP server"
+msgstr "Udaljeni IPP server"
 
-#: cups/kmcupsconfigwidget.cpp:76
-msgid "Pass&word:"
-msgstr "&Šifra:"
+#: cups/kmwipp.cpp:39
+msgid ""
+"<p>Enter the information concerning the remote IPP server owning the targeted "
+"printer. This wizard will poll the server before continuing.</p>"
+msgstr ""
+"<p>Unesite informacije o udaljenom IPP serveru koji je vlasnik ciljnog "
+"štampača. Ovaj čarobnjak će kontaktirati server prije nastavka.</p>"
 
-#: cups/kmcupsconfigwidget.cpp:79
-msgid "&Store password in configuration file"
-msgstr "&Snimi šifru u datoteku sa postavkama"
+#: cups/kmwipp.cpp:43
+msgid "Port:"
+msgstr "Port:"
 
-#: cups/kmcupsconfigwidget.cpp:81
-msgid "Use &anonymous access"
-msgstr "Koristi &anonimni pristup"
+#: cups/kmwipp.cpp:59
+msgid "Incorrect port number."
+msgstr "Neispravan broj porta."
+
+#: cups/kmwipp.cpp:72
+msgid "<nobr>Unable to connect to <b>%1</b> on port <b>%2</b> .</nobr>"
+msgstr "<nobr>Ne mogu se spojiti na <b>%1</b> na port <b>%2</b> .</nobr>"
 
 #: cups/kpschedulepage.cpp:40
 msgid ""
@@ -1638,21 +4560,23 @@ msgstr "&Prioritet zadatka:"
 msgid "The time specified is not valid."
 msgstr "Specifirano vrijeme nije ispravno."
 
-#: cups/kmpropquota.cpp:57
-msgid "Quotas"
-msgstr "Kvote"
-
-#: cups/kmpropquota.cpp:58
-msgid "Quota Settings"
-msgstr "Postavke kvota"
-
-#: cups/ippreportdlg.cpp:34
-msgid "IPP Report"
-msgstr "IPP izvještaj"
+#: cups/kmcupsmanager.cpp:634 lpr/matichandler.cpp:254
+#: lpr/matichandler.cpp:358
+msgid ""
+"Unable to find the executable foomatic-datafile in your PATH. Check that "
+"Foomatic is correctly installed."
+msgstr ""
+"Ne mogu pronaći izvršni foomatic-datafile u vašem PATHu. Provjerite da li je "
+"Foomatic ispravno instaliran."
 
-#: cups/ippreportdlg.cpp:93
-msgid "Internal error: unable to generate HTML report."
-msgstr "Interna greška: nemogu generisati HTML izvještaj."
+#: cups/kmcupsmanager.cpp:666 lpr/matichandler.cpp:286
+#: lpr/matichandler.cpp:405
+msgid ""
+"Unable to create the Foomatic driver [%1,%2]. Either that driver does not "
+"exist, or you don't have the required permissions to perform that operation."
+msgstr ""
+"Ne mogu da napravim Foomatic drajver [%1,%2]. Ili taj drajver ne postoji, ili "
+"nemate potrebne dozvole da obavite tu operaciju."
 
 #: cups/kmcupsmanager.cpp:819
 msgid "Library cupsdconf not found. Check your installation."
@@ -1670,11 +4594,6 @@ msgstr "&Izvezi drajver..."
 msgid "&Printer IPP Report"
 msgstr "&Izvještaj IPP štampača..."
 
-#: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218
-#, c-format
-msgid "IPP Report for %1"
-msgstr "IPP izvještaj za %1"
-
 #: cups/kmcupsmanager.cpp:972
 msgid "Unable to retrieve printer information. Error received:"
 msgstr "Ne mogu dobaviti informacije o štampaču. Dobijam grešku:"
@@ -1717,139 +4636,6 @@ msgstr ""
 "Spajanje na CUPS server nije uspjelo. Provjerite da li je CUPS server ispravno "
 "instaliran i pokrenut. Greška: %1."
 
-#: cups/ipprequest.cpp:164
-msgid "You don't have access to the requested resource."
-msgstr "Nemate ovlasti za pisanje u traženi resurs."
-
-#: cups/ipprequest.cpp:167
-msgid "You are not authorized to access the requested resource."
-msgstr "Niste autorizovani za pristup traženom resursu."
-
-#: cups/ipprequest.cpp:170
-msgid "The requested operation cannot be completed."
-msgstr "Tražena operacija nije mogla biti završena."
-
-#: cups/ipprequest.cpp:173
-msgid "The requested service is currently unavailable."
-msgstr "Traženi servis trenutno nije dostupan."
-
-#: cups/ipprequest.cpp:176
-msgid "The target printer is not accepting print jobs."
-msgstr "Ciljni štampač ne prima nove zadatke."
-
-#: cups/ipprequest.cpp:313
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running."
-msgstr ""
-"Spajanje na CUPS server nije uspjelo. Provjerite da li je CUPS server ispravno "
-"instaliran i pokrenut."
-
-#: cups/ipprequest.cpp:316
-msgid "The IPP request failed for an unknown reason."
-msgstr "IPP zahtjev nije uspio iz nepoznatog razloga."
-
-#: cups/ipprequest.cpp:461
-msgid "Attribute"
-msgstr "Atribut"
-
-#: cups/ipprequest.cpp:462
-msgid "Values"
-msgstr "Vrijednosti"
-
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "True"
-msgstr "Tačno"
-
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "False"
-msgstr "Netačno"
-
-#: cups/kmwippprinter.cpp:45
-msgid "IPP Printer Information"
-msgstr "IPP informacije o štampaču"
-
-#: cups/kmwippprinter.cpp:55
-msgid "&Printer URI:"
-msgstr "&URI štampača:"
-
-#: cups/kmwippprinter.cpp:64
-msgid ""
-"<p>Either enter the printer URI directly, or use the network scanning "
-"facility.</p>"
-msgstr ""
-"<p>Ili unesite direktno URI štampača, ili koristite pogodnost pretraživanja "
-"mreže.</p>"
-
-#: cups/kmwippprinter.cpp:65
-msgid "&IPP Report"
-msgstr "IPP izvještaj"
-
-#: cups/kmwippprinter.cpp:112
-msgid "You must enter a printer URI."
-msgstr "Morate unijeti URI štampača."
-
-#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117
-msgid "No printer found at this address/port."
-msgstr "Nije pronađen štampač na ovoj adresi/portu."
-
-#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136
-msgid ""
-"_: Unknown host - 1 is the IP\n"
-"<Unknown> (%1)"
-msgstr "<Nepoznat> (%1)"
-
-#: cups/kmwippprinter.cpp:173
-msgid "<b>Name</b>: %1<br>"
-msgstr "<b>Ime</b>: %1<br>"
-
-#: cups/kmwippprinter.cpp:174
-msgid "<b>Location</b>: %1<br>"
-msgstr "<b>Lokacija</b>: %1<br>"
-
-#: cups/kmwippprinter.cpp:175
-msgid "<b>Description</b>: %1<br>"
-msgstr "<b>Opis</b>: %1<br>"
-
-#: cups/kmwippprinter.cpp:182
-msgid "<b>Model</b>: %1<br>"
-msgstr "<b>Model</b>: %1<br>"
-
-#: cups/kmwippprinter.cpp:187 kmprinter.cpp:139
-msgid "Idle"
-msgstr "Mirovanje"
-
-#: cups/kmwippprinter.cpp:188 kmprinter.cpp:141
-msgid "Stopped"
-msgstr "Zaustavljen"
-
-#: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140
-msgid "Processing..."
-msgstr "Procesiram..."
-
-#: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142
-msgid ""
-"_: Unknown State\n"
-"Unknown"
-msgstr "Nepoznato"
-
-#: cups/kmwippprinter.cpp:192
-msgid "<b>State</b>: %1<br>"
-msgstr "<b>Status</b>: %1<br>"
-
-#: cups/kmwippprinter.cpp:199
-#, c-format
-msgid "Unable to retrieve printer info. Printer answered:<br><br>%1"
-msgstr ""
-"Ne mogu dobaviti informacije o štampaču. Štampač je odgovorio:"
-"<br>"
-"<br>%1"
-
-#: cups/kmwippprinter.cpp:222
-msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)."
-msgstr ""
-"Ne mogu generisati izvještaj. IPP zahtjev nije uspio uz poruku: %1 (0x%2)."
-
 #: cups/kmwother.cpp:41
 msgid "URI Selection"
 msgstr "Odabir URIja"
@@ -1869,301 +4655,97 @@ msgstr ""
 "<li>lpd://server/queue</li>"
 "<li>parallel:/dev/lp0</li></ul>"
 
-#: cups/kmwother.cpp:51 management/kminfopage.cpp:52
-#: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54
-msgid "URI:"
-msgstr "URI:"
-
 #: cups/kmwother.cpp:78
 msgid "CUPS Server %1:%2"
 msgstr "CUPS server %1:%2"
 
-#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92
-msgid "&Starting banner:"
-msgstr "&Početna traka:"
-
-#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93
-msgid "&Ending banner:"
-msgstr "&Završna traka:"
-
-#: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298
-msgid "Banners"
-msgstr "Trake"
-
-#: cups/kmpropbanners.cpp:50
-msgid "Banner Settings"
-msgstr "Postavke trake"
-
-#: cups/kpimagepage.cpp:44
-msgid ""
-" <qt>  "
-"<p><b>Brightness:</b> Slider to control the brightness value of all colors "
-"used.</p> "
-"<p> The brightness value can range from 0 to 200. Values greater than 100 will  "
-"lighten the print. Values less than 100 will darken the print. </p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o brightness=...      # use range from \"0\" to \"200\"  </pre>  </p>  "
-"</qt>"
-msgstr ""
-
-#: cups/kpimagepage.cpp:58
-msgid ""
-" <qt>  "
-"<p><b>Hue (Tint):</b> Slider to control the hue value for color rotation.</p> "
-"<p> The hue value is a number from -360 to 360 and represents the color hue "
-"rotation.  The following table summarizes the change you will see for the base "
-"colors:  "
-"<center>  <table border=\"1\" width=\"70%\">  "
-"<tr>"
-"<th><b>Original</b></th> "
-"<th><b>hue=-45</b></th> "
-"<th><b>hue=45</b></th>   </tr>  "
-"<tr>"
-"<td>Red</td>             "
-"<td>Purple</td>         "
-"<td>Yellow-orange</td>   </tr>  "
-"<tr>"
-"<td>Green</td>           "
-"<td>Yellow-green</td>   "
-"<td>Blue-green</td>      </tr>  "
-"<tr>"
-"<td>Yellow</td>          "
-"<td>Orange</td>         "
-"<td>Green-yellow</td>    </tr>  "
-"<tr>"
-"<td>Blue</td>            "
-"<td>Sky-blue</td>       "
-"<td>Purple</td>          </tr>  "
-"<tr>"
-"<td>Magenta</td>         "
-"<td>Indigo</td>         "
-"<td>Crimson</td>         </tr>  "
-"<tr>"
-"<td>Cyan</td>            "
-"<td>Blue-green</td>     "
-"<td>Light-navy-blue</td> </tr>  </table>  </center>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o hue=...     # use range from \"-360\" to \"360\"  </pre> </p>  </qt>"
-msgstr ""
-
-#: cups/kpimagepage.cpp:83
-msgid ""
-" <qt>  "
-"<p><b>Saturation:</b> Slider to control the saturation value for all colors "
-"used.</p> "
-"<p> The saturation value adjusts the saturation of the colors in an image, "
-"similar to  the color knob on your television. The color saturation value.can "
-"range from 0 to 200. On inkjet printers, a higher saturation value uses more "
-"ink. On laserjet printers, a  higher saturation uses more toner.  A color "
-"saturation of 0 produces a black-and-white print, while a value of 200 will  "
-"make the colors extremely intense. </p> "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o saturation=...      # use range from \"0\" to \"200\"  </pre> </p>  "
-"</qt>"
-msgstr ""
+#: cups/kmwquota.cpp:46
+msgid "second(s)"
+msgstr "sekundi"
 
-#: cups/kpimagepage.cpp:101
-msgid ""
-" <qt>  "
-"<p><b>Gamma:</b> Slider to control the gamma value for color correction.</p> "
-"<p> The gamma value can range from 1 to 3000.  A gamma values greater than 1000 "
-"lightens the print. A gamma value less than 1000  darken the print. The default "
-"gamma is 1000. </p> "
-"<p><b>Note:</b></p> the gamma value adjustment is not visible in the thumbnail  "
-"preview. </p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o gamma=...      # use range from \"1\" to \"3000\"  </pre> </p>  "
-"</qt>"
-msgstr ""
+#: cups/kmwquota.cpp:47
+msgid "minute(s)"
+msgstr "minuta"
 
-#: cups/kpimagepage.cpp:118
-msgid ""
-" <qt>  "
-"<p><b>Image Printing Options</b></p>  "
-"<p>All options controlled on this page only apply to printing images.  Most "
-"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF,  PNM "
-"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color "
-"output of image printouts are:  "
-"<ul>  "
-"<li> Brightness  </li> "
-"<li> Hue         </li> "
-"<li> Saturation  </li> "
-"<li> Gamma       </li> </ul>  "
-"<p>For a more detailed explanation about Brightness, Hue, Saturation and Gamma "
-"settings, please  look at the 'WhatsThis' items provided for these controls.  "
-"</p>  </p>  </qt>"
-msgstr ""
+#: cups/kmwquota.cpp:48
+msgid "hour(s)"
+msgstr "sati"
 
-#: cups/kpimagepage.cpp:136
-msgid ""
-" <qt>  "
-"<p><b>Coloration Preview Thumbnail</b></p>  "
-"<p>The coloration preview thumbnail indicates change of image coloration by "
-"different settings.  Options to influence output are:  "
-"<ul>  "
-"<li> Brightness  </li> "
-"<li> Hue (Tint)  </li> "
-"<li> Saturation  </li> "
-"<li> Gamma       </li> </ul>  </p>  "
-"<p>For a more detailed explanation about Brightness, Hue, Saturation and Gamma "
-"settings, please  look at the 'WhatsThis' items provided for these controls.  "
-"</p>  </qt>"
-msgstr ""
+#: cups/kmwquota.cpp:49
+msgid "day(s)"
+msgstr "dana"
 
-#: cups/kpimagepage.cpp:152
-msgid ""
-" <qt>  "
-"<p><b>Image Size:</b> Dropdown menu to control the image size on the printed "
-"paper. Dropdown  works in conjunction with slider below. Dropdown options "
-"are:.</p> "
-"<ul>  "
-"<li> <b>Natural Image Size:</b> Image prints in its natural image size. If it "
-"does not fit onto  one sheet, the printout will be spread across multiple "
-"sheets. Note, that the slider is disabled  when selecting 'natural image size' "
-"in the dropdown menu. </li> "
-"<li> <b>Resolution (ppi):</b> The resolution value slider covers a number range "
-"from 1 to 1200.  It specifies the resolution of the image in Pixels Per Inch "
-"(PPI). An image that is 3000x2400 pixels  will print 10x8 inches at 300 pixels "
-"per inch, for example, but 5x4 inches at 600 pixels per inch. If the specified "
-"resolution makes the image larger than the page, multiple pages will be "
-"printed.  Resolution defaults to 72 ppi.  </li> "
-"<li> <b>% of Page Size:</b> The percent value slider covers numbers from 1 to "
-"800. It specifies the size  in relation to the page (not the image). A scaling "
-"of 100 percent will fill the page as completely  as the image aspect ratio "
-"allows (doing auto-rotation of the image as needed).  A scaling of more than "
-"100 will print the image across multiple  sheets. A scaling of 200 percent will "
-"print on up to 4 pages. </li> Scaling in % of page size defaults to 100 %.  "
-"<li> <b>% of Natural Image Size:</b> The percent value slider moves from 1 to "
-"800. It specifies  the printout size in relation  to the natural image size. A "
-"scaling of 100 percent will print the image at its natural size, while a  "
-"scaling of 50 percent will print the image at half its natural size. If the "
-"specified scaling makes  the image larger than the page, multiple pages will be "
-"printed.  Scaling in % of natural image size defaults to 100 %.  </ul>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>     -o natural-scaling=...     # range in  %  is 1....800  "
-"<br>     -o scaling=...             # range in  %  is 1....800  "
-"<br>     -o ppi=...                 # range in ppi is 1...1200  </pre> </p>  "
-"</qt>"
-msgstr ""
+#: cups/kmwquota.cpp:50
+msgid "week(s)"
+msgstr "sedmica"
 
-#: cups/kpimagepage.cpp:192
-msgid ""
-" <qt>  "
-"<p><b>Position Preview Thumbnail</b></p>  "
-"<p>This position preview thumbnail indicates the position of the image on the "
-"paper sheet.  "
-"<p>Click on horizontal and vertical radio buttons to move image alignment on "
-"paper around. Options are:  "
-"<ul>  "
-"<li> center      </li> "
-"<li> top         </li> "
-"<li> top-left    </li> "
-"<li> left        </li> "
-"<li> bottom-left </li> "
-"<li> bottom      </li> "
-"<li> bottom-right</li> "
-"<li> right       </li> "
-"<li> top-right   </li> </ul>  </p>  </qt>"
-msgstr ""
+#: cups/kmwquota.cpp:51
+msgid "month(s)"
+msgstr "mjeseci"
 
-#: cups/kpimagepage.cpp:210
-msgid ""
-" <qt>  "
-"<p><b>Reset to Default Values</b> </p>  "
-"<p> Reset all coloration settings to default values. Default values are:  "
-"<ul>  "
-"<li> Brightness: 100 </li> "
-"<li> Hue (Tint).   0 </li> "
-"<li> Saturation: 100 </li> "
-"<li> Gamma:     1000 </li> </ul>  </p>  </qt>"
-msgstr ""
+#: cups/kmwquota.cpp:79
+msgid "Printer Quota Settings"
+msgstr "Postavke kvote štampača"
 
-#: cups/kpimagepage.cpp:222
+#: cups/kmwquota.cpp:104
 msgid ""
-" <qt>  "
-"<p><b>Image Positioning:</b></p>  "
-"<p>Select a pair of radiobuttons to  move image to the position you want on the "
-"paper printout. Default  is 'center'. </p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o position=...       # examples: \"top-left\" or \"bottom\"  </pre> "
-"</p>  </qt>"
+"<p>Set here the quota for this printer. Using limits of <b>0</b> "
+"means that no quota will be used. This is equivalent to set quota period to <b>"
+"<nobr>No quota</nobr></b> (-1). Quota limits are defined on a per-user base and "
+"applied to all users.</p>"
 msgstr ""
+"<p>Ovdje postavljate kvotu za ovaj štampač. Ako zadate ograničenje <b>0</b> "
+"to znači da se neće koristiti kvota. Ovo je ekvivivalentno postavljaju perioda "
+"kvote na <b><nobr>Bez kvote</nobr></b> (-1). Ograničenja kvote se definišu na "
+"nivou korisnika, a primijenjuju se na sve korisnike.</p>"
 
-#: cups/kpimagepage.cpp:237
-msgid "Image"
-msgstr "Slika"
-
-#: cups/kpimagepage.cpp:239
-msgid "Color Settings"
-msgstr "Postavke boje"
-
-#: cups/kpimagepage.cpp:241
-msgid "Image Size"
-msgstr "Veličina slike"
+#: cups/kmwquota.cpp:130
+msgid "You must specify at least one quota limit."
+msgstr "Morate makar navesti jedno ograničenje kvote."
 
-#: cups/kpimagepage.cpp:243
-msgid "Image Position"
-msgstr "Položaj slike"
+#: cups/kmconfigcupsdir.cpp:34
+msgid "Folder"
+msgstr "Direktorij"
 
-#: cups/kpimagepage.cpp:247
-msgid "&Brightness:"
-msgstr "&Osvjetljenost:"
+#: cups/kmconfigcupsdir.cpp:35
+msgid "CUPS Folder Settings"
+msgstr "Postavke CUPS direktorija"
 
-#: cups/kpimagepage.cpp:252
-msgid "&Hue (Color rotation):"
-msgstr "&Hue (rotacija boja):"
+#: cups/kmconfigcupsdir.cpp:38
+msgid "Installation Folder"
+msgstr "Instalacioni direktorij"
 
-#: cups/kpimagepage.cpp:257
-msgid "&Saturation:"
-msgstr "&Saturation:"
+#: cups/kmconfigcupsdir.cpp:41
+msgid "Standard installation (/)"
+msgstr "Standardna instalacija (/)"
 
-#: cups/kpimagepage.cpp:262
-msgid "&Gamma (Color correction):"
-msgstr "&Gamma (ispravka boje):"
+#: cups/ippreportdlg.cpp:34
+msgid "IPP Report"
+msgstr "IPP izvještaj"
 
-#: cups/kpimagepage.cpp:283
-msgid "&Default Settings"
-msgstr "&Uobičajene vrijednosti"
+#: cups/ippreportdlg.cpp:93
+msgid "Internal error: unable to generate HTML report."
+msgstr "Interna greška: nemogu generisati HTML izvještaj."
 
-#: cups/kpimagepage.cpp:289
-msgid "Natural Image Size"
-msgstr "Stvarna veličina slike"
+#: cups/kmpropusers.cpp:55
+msgid "Denied users"
+msgstr "Odbijeni korisnici"
 
-#: cups/kpimagepage.cpp:290
-msgid "Resolution (ppi)"
-msgstr "Rezolucija (ppi)"
+#: cups/kmpropusers.cpp:62
+msgid "Allowed users"
+msgstr "Odobreni korisnici"
 
-#: cups/kpimagepage.cpp:292
-#, no-c-format
-msgid "% of Page"
-msgstr "% stranice"
+#: cups/kmpropusers.cpp:76
+msgid "All users allowed"
+msgstr "Svi korisnici su odobreni"
 
-#: cups/kpimagepage.cpp:294
-#, no-c-format
-msgid "% of Natural Image Size"
-msgstr "% prirodne veličine slike"
+#: cups/kmwippselect.cpp:38
+msgid "Remote IPP Printer Selection"
+msgstr "Izbor udaljenog IPP štampača"
 
-#: cups/kpimagepage.cpp:304
-msgid "&Image size type:"
-msgstr "&Vrsta veličine slike:"
+#: cups/kmwippselect.cpp:51
+msgid "You must select a printer."
+msgstr "Morate odabrati štampač."
 
 #: cups/kmcupsjobmanager.cpp:349
 msgid "Job Report"
@@ -2206,38 +4788,55 @@ msgstr "Atributi zadatka %1@%2 (%3)"
 msgid "Unable to set job attributes: "
 msgstr "Ne mogu podesiti atribute zadatka: "
 
-#: cups/kmwipp.cpp:35
-msgid "Remote IPP server"
-msgstr "Udaljeni IPP server"
+#: cups/kmwbanners.cpp:57
+msgid "No Banner"
+msgstr "Bez trake"
 
-#: cups/kmwipp.cpp:39
-msgid ""
-"<p>Enter the information concerning the remote IPP server owning the targeted "
-"printer. This wizard will poll the server before continuing.</p>"
-msgstr ""
-"<p>Unesite informacije o udaljenom IPP serveru koji je vlasnik ciljnog "
-"štampača. Ovaj čarobnjak će kontaktirati server prije nastavka.</p>"
+#: cups/kmwbanners.cpp:58
+msgid "Classified"
+msgstr "Povjerljivo"
 
-#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34
-#: rlpr/kmwrlpr.cpp:62
-msgid "Host:"
-msgstr "Računar:"
+#: cups/kmwbanners.cpp:59
+msgid "Confidential"
+msgstr "Povjerljivi"
 
-#: cups/kmwipp.cpp:43
-msgid "Port:"
-msgstr "Port:"
+#: cups/kmwbanners.cpp:60
+msgid "Secret"
+msgstr "Tajna"
 
-#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79
-msgid "Empty server name."
-msgstr "Prazno ime servera."
+#: cups/kmwbanners.cpp:61
+msgid "Standard"
+msgstr "Standardno"
 
-#: cups/kmwipp.cpp:59
-msgid "Incorrect port number."
-msgstr "Neispravan broj porta."
+#: cups/kmwbanners.cpp:62
+msgid "Top Secret"
+msgstr "Strogo povjerljivo"
 
-#: cups/kmwipp.cpp:72
-msgid "<nobr>Unable to connect to <b>%1</b> on port <b>%2</b> .</nobr>"
-msgstr "<nobr>Ne mogu se spojiti na <b>%1</b> na port <b>%2</b> .</nobr>"
+#: cups/kmwbanners.cpp:63
+msgid "Unclassified"
+msgstr "Neograničeno"
+
+#: cups/kmwbanners.cpp:86
+msgid "Banner Selection"
+msgstr "Izbor trake"
+
+#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92
+msgid "&Starting banner:"
+msgstr "&Početna traka:"
+
+#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93
+msgid "&Ending banner:"
+msgstr "&Završna traka:"
+
+#: cups/kmwbanners.cpp:99
+msgid ""
+"<p>Select the default banners associated with this printer. These banners will "
+"be inserted before and/or after each print job sent to the printer. If you "
+"don't want to use banners, select <b>No Banner</b>.</p>"
+msgstr ""
+"<p>Izaberite podrazumjevane trake koje će biti pridružene ovom štampaču. Ove "
+"trake će biti ubačene prije i/ili poslije svakog zadatka štampe koji se šalje "
+"štampaču. Ako ne želite koristiti trake, izaberite <b>Bez trake</b>.</p>"
 
 #: cups/kptagspage.cpp:36
 msgid ""
@@ -2290,12 +4889,6 @@ msgstr ""
 msgid "Additional Tags"
 msgstr "Dodatni tagovi"
 
-#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237
-#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141
-#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101
-msgid "Name"
-msgstr "Ime i prezime"
-
 #: cups/kptagspage.cpp:83
 msgid "Value"
 msgstr "Vrijednost"
@@ -2308,456 +4901,17 @@ msgstr "Samo za čitanje"
 msgid "The tag name must not contain any spaces, tabs or quotes: <b>%1</b>."
 msgstr "Naziv taga ne smije sadržavati razmake: <b>%1</b>."
 
-#: cups/kmwbanners.cpp:57
-msgid "No Banner"
-msgstr "Bez trake"
-
-#: cups/kmwbanners.cpp:58
-msgid "Classified"
-msgstr "Povjerljivo"
-
-#: cups/kmwbanners.cpp:59
-msgid "Confidential"
-msgstr "Povjerljivi"
-
-#: cups/kmwbanners.cpp:60
-msgid "Secret"
-msgstr "Tajna"
-
-#: cups/kmwbanners.cpp:61
-msgid "Standard"
-msgstr "Standardno"
-
-#: cups/kmwbanners.cpp:62
-msgid "Top Secret"
-msgstr "Strogo povjerljivo"
-
-#: cups/kmwbanners.cpp:63
-msgid "Unclassified"
-msgstr "Neograničeno"
-
-#: cups/kmwbanners.cpp:86
-msgid "Banner Selection"
-msgstr "Izbor trake"
-
-#: cups/kmwbanners.cpp:99
-msgid ""
-"<p>Select the default banners associated with this printer. These banners will "
-"be inserted before and/or after each print job sent to the printer. If you "
-"don't want to use banners, select <b>No Banner</b>.</p>"
-msgstr ""
-"<p>Izaberite podrazumjevane trake koje će biti pridružene ovom štampaču. Ove "
-"trake će biti ubačene prije i/ili poslije svakog zadatka štampe koji se šalje "
-"štampaču. Ako ne želite koristiti trake, izaberite <b>Bez trake</b>.</p>"
-
-#: cups/kmwfax.cpp:39
-msgid "Fax Serial Device"
-msgstr "Fax serijski uređaj"
-
-#: cups/kmwfax.cpp:43
-msgid "<p>Select the device which your serial Fax/Modem is connected to.</p>"
-msgstr "<p>Odaberite uređaj gdje je vaš serijski Fax/Modem spojen.</p>"
-
-#: cups/kmwfax.cpp:81
-msgid "You must select a device."
-msgstr "Morate odabrati uređaj."
-
-#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72
-msgid ""
-"No valid print executable was found in your path. Check your installation."
-msgstr ""
-"Nije pronađena ispravna izvršna datoteka za štampu u vašem putu. Provjerite "
-"vašu instalaciju."
-
-#: foomatic/kmfoomaticmanager.cpp:70
-msgid "This is not a Foomatic printer"
-msgstr "Ovo nije Foomatic štampač"
-
-#: foomatic/kmfoomaticmanager.cpp:75
-msgid "Some printer information are missing"
-msgstr "Neke informacije o štampaču nedostaju"
-
-#: kmmanager.cpp:70
-msgid "This operation is not implemented."
-msgstr "Ova operacija nije napravljena."
-
-#: kmmanager.cpp:169
-msgid "Unable to locate test page."
-msgstr "Ne mogu pronaći testnu stranicu."
-
-#: kmmanager.cpp:449
-msgid "Can't overwrite regular printer with special printer settings."
-msgstr "Ne mogu prepisati običan štampač sa posebnim postavkama štampača."
-
-#: kmmanager.cpp:478
-#, c-format
-msgid "Parallel Port #%1"
-msgstr "Paralelni port #%1"
-
-#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
-#, c-format
-msgid "Unable to load TDE print management library: %1"
-msgstr "Ne mogu učitati TDEovu biblioteku za upravljanje štampom:<br>%1"
-
-#: kmmanager.cpp:491 kxmlcommand.cpp:669
-msgid "Unable to find wizard object in management library."
-msgstr "Ne mogu pronaći čarobnjak u biblioteci za upravljanje."
-
-#: kmmanager.cpp:507
-msgid "Unable to find options dialog in management library."
-msgstr "Ne mogu pronaći dijalog opcija u biblioteci za upravljanje."
-
-#: kmmanager.cpp:534
-msgid "No plugin information available"
-msgstr "Informacije o dodatku (plugin-u) nisu dostupne"
-
-#: kprintpreview.cpp:140
-msgid "Do you want to continue printing anyway?"
-msgstr "Da li želite svejedno nastaviti sa štampanjem?"
-
-#: kprintpreview.cpp:148 kprintpreview.cpp:227
-msgid "Print Preview"
-msgstr "Pregled prije ispisa"
-
-#: kprintpreview.cpp:278
-msgid ""
-"The preview program %1 cannot be found. Check that the program is correctly "
-"installed and located in a directory included in your PATH environment "
-"variable."
-msgstr ""
-"Nisam mogao pronaći program za pregled <b>%1</b>. Provjerite da li je ovaj "
-"program ispravno instaliran i smješten u direktoriju koji je uključen u vašu <b>"
-"PATH</b> promjenljivu."
-
-#: kprintpreview.cpp:303
-msgid ""
-"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
-"other external PostScript viewer could be found."
-msgstr ""
-"Pregled nije uspio: nije pronađen niti interni TDE PostScript preglednik "
-"(KGhostView), niti bilo koji drugi vanjski PostScript preglednik."
-
-#: kprintpreview.cpp:307
-#, c-format
-msgid ""
-"Preview failed: TDE could not find any application to preview files of type %1."
-msgstr ""
-"Pregled nije uspio: TDE ne može naći nijednu aplikaciju za pregledanje datoteka "
-"tipa %1."
-
-#: kprintpreview.cpp:317
-#, c-format
-msgid "Preview failed: unable to start program %1."
-msgstr "Pregled nije uspio: ne mogu pokrenuti %1."
-
-#: kprintpreview.cpp:322
-msgid "Do you want to continue printing?"
-msgstr "Da li želite nastaviti sa štampom?"
-
-#: marginwidget.cpp:37
-msgid ""
-" <qt>  "
-"<p><b>Top Margin</b></p>.  "
-"<p>This spinbox/text edit field lets you control the top margin of your "
-"printout if the printing  application does not define its margins internally. "
-"</p>  "
-"<p>The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror.. </p> "
-"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o page-top=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  </pre> </p>  </qt>"
-msgstr ""
-
-#: marginwidget.cpp:57
-msgid ""
-" <qt>  "
-"<p><b>Bottom Margin</b></p>.  "
-"<p>This spinbox/text edit field lets you control the bottom margin of your "
-"printout if the printing  application does not define its margins internally. "
-"</p>  "
-"<p>The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror. </p> "
-"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  </pre> </qt>"
-msgstr ""
-
-#: marginwidget.cpp:76
-msgid ""
-" <qt>  "
-"<p><b>Left Margin</b></p>.  "
-"<p>This spinbox/text edit field lets you control the left margin of your "
-"printout if the printing  application does not define its margins internally. "
-"</p>  "
-"<p>The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror. </p> "
-"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  </pre> </qt>"
-msgstr ""
-
-#: marginwidget.cpp:95
-msgid ""
-" <qt>  "
-"<p><b>Right Margin</b></p>.  "
-"<p>This spinbox/text edit field lets you control the right margin of your "
-"printout if the printing  application does not define its margins internally. "
-"</p>  "
-"<p>The setting works for instance for ASCII text file printing, or for printing "
-"from KMail and  and Konqueror. </p> "
-"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
-"OpenOffice.org printing,  because these applications (or rather their users) "
-"are expected to do it by themselves.  It also does not work for PostScript or "
-"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
-"equal to 1 inch.  </pre> </qt>"
-msgstr ""
-
-#: marginwidget.cpp:114
-msgid ""
-" <qt>  "
-"<p><b>Change Measurement Unit<b></p>.  "
-"<p>You can change the units of measurement for the page margins here. Select "
-"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).  </p>  </qt>"
-msgstr ""
-
-#: marginwidget.cpp:121
-msgid ""
-" <qt>  "
-"<p><b>Custom Margins Checkbox</b></p>.  "
-"<p>Enable this checkbox if you want to modify the margins of your printouts  "
-"<p>You can change margin settings in 4 ways:  "
-"<ul>  "
-"<li>Edit the text fields. </li>  "
-"<li>Click spinbox arrows. </li>  "
-"<li>Scroll wheel of wheelmouses. </li>  "
-"<li>Drag margins in preview frame with mouse. </li>  </ul>  <b>Note:</b> "
-"The margin setting does not work if you load such files directly into  "
-"kprinter, which have their print margins hardcoded internally, like as most  "
-"PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
-"framework, such as OpenOffice.org. </p>  </qt>"
-msgstr ""
-
-#: marginwidget.cpp:138
-msgid ""
-" <qt>  "
-"<p><b>\"Drag-your-Margins\" </p>.  "
-"<p>Use your mouse to drag and set each margin on this little preview window. "
-"</p>  </qt>"
-msgstr ""
-
-#: marginwidget.cpp:148
-msgid "&Use custom margins"
-msgstr "&Koristi vlastite margine"
-
-#: marginwidget.cpp:158
-msgid "&Top:"
-msgstr "&Vrh:"
-
-#: marginwidget.cpp:159
-msgid "&Bottom:"
-msgstr "D&no:"
-
-#: marginwidget.cpp:160
-msgid "Le&ft:"
-msgstr "Lije&vo:"
-
-#: marginwidget.cpp:161
-msgid "&Right:"
-msgstr "&Desno:"
-
-#: marginwidget.cpp:164
-msgid "Pixels (1/72nd in)"
-msgstr "Piksela (1/72ina inča)"
-
-#: marginwidget.cpp:167
-msgid "Inches (in)"
-msgstr "Inča (in)"
-
-#: marginwidget.cpp:168
-msgid "Centimeters (cm)"
-msgstr "Centimetara (cm)"
-
-#: marginwidget.cpp:169
-msgid "Millimeters (mm)"
-msgstr "Milimetara (mm)"
-
-#: kprinterimpl.cpp:156
-msgid "Cannot copy multiple files into one file."
-msgstr "Ne mogu kopirati više datoteka u jednu datoteku."
-
-#: kprinterimpl.cpp:165
-msgid "Cannot save print file to %1. Check that you have write access to it."
-msgstr ""
-"Ne mogu spasiti datoteku štampe u %1. Provjerite da li imate pristup za "
-"pisanje."
-
-#: kprinterimpl.cpp:233
-#, c-format
-msgid "Printing document: %1"
-msgstr "Štampam dokument: %1"
-
-#: kprinterimpl.cpp:251
-#, c-format
-msgid "Sending print data to printer: %1"
-msgstr "Šaljem podatke na štampač: %1"
-
-#: kprinterimpl.cpp:279
-msgid "Unable to start child print process. "
-msgstr "Ne mogu pokrenuti dijete-proces štampe. "
-
-#: kprinterimpl.cpp:281
-msgid ""
-"The TDE print server (<b>tdeprintd</b>) could not be contacted. Check that this "
-"server is running."
-msgstr ""
-"Ne mogu kontaktirati TDEov print server (<b>tdeprintd</b>"
-"). Provjerite da li je pokrenut."
-
-#: kprinterimpl.cpp:283
-msgid ""
-"_: 1 is the command that <files> is given to\n"
-"Check the command syntax:\n"
-"%1 <files>"
-msgstr ""
-"Provjerite sintaksu komande:\n"
-"%1 <datoteke>"
-
-#: kprinterimpl.cpp:290
-msgid "No valid file was found for printing. Operation aborted."
-msgstr "Nije pronađena ispravna datoteka za štampu. Operacija prekinuta."
-
-#: kprinterimpl.cpp:325
-msgid ""
-"<p>Unable to perform the requested page selection. The filter <b>psselect</b> "
-"cannot be inserted in the current filter chain. See <b>Filter</b> "
-"tab in the printer properties dialog for further information.</p>"
-msgstr ""
-"<p>Ne mogu izvršiti zahtjevani izbor stranice. Filter<b>psselect</b> "
-"ne može biti dodan na trenutni lanac filtera. Pogledajte list <b>Filter</b> "
-"u osobinama štampača za daljnje informacije.</p>"
-
-#: kprinterimpl.cpp:355
-msgid "<p>Could not load filter description for <b>%1</b>.</p>"
-msgstr "<p>Greška prilikom čitanja opisa filtera <b>%1</b>.</p>"
-
-#: kprinterimpl.cpp:371
-msgid ""
-"<p>Error while reading filter description for <b>%1</b>"
-". Empty command line received.</p>"
-msgstr ""
-"<p>Greška prilikom čitanja opisa filtera <b>%1</b>. Primljena je prazna "
-"komandna linija.</p>"
-
-#: kprinterimpl.cpp:385
-msgid ""
-"The MIME type %1 is not supported as input of the filter chain (this may happen "
-"with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want TDE to convert the file to a supported format?</p>"
-msgstr ""
-"MIME tip %1 nije podržan kao ulaz za lanac filtera (ovo se dešava sa ne-CUPS "
-"spoolerima kada pokušaju izvršiti izbor stranice na ne-PostScript datoteci). "
-"Želite li da TDE pretvori datoteku u neki od podržanih formata?</p>"
-
-#: kprinterimpl.cpp:389 kprinterimpl.cpp:509
-msgid "Convert"
-msgstr "Pretvori"
-
-#: kprinterimpl.cpp:399
-msgid "Select MIME Type"
-msgstr "Izaberite MIME tip"
-
-#: kprinterimpl.cpp:400
-msgid "Select the target format for the conversion:"
-msgstr "Izaberite ciljni format za pretvaranje:"
-
-#: kprinterimpl.cpp:404 kprinterimpl.cpp:430
-msgid "Operation aborted."
-msgstr "Operacija prekinuta."
-
-#: kprinterimpl.cpp:410
-msgid "No appropriate filter found. Select another target format."
-msgstr "Nije pronađen pogodan filter. Izaberite neki drugi ciljni format."
-
-#: kprinterimpl.cpp:423
-msgid ""
-"<qt>Operation failed with message:"
-"<br>%1"
-"<br>Select another target format.</qt>"
-msgstr ""
-"<qt>Operacija nije uspjela uz poruku:"
-"<br>%1"
-"<br>Izaberite neki drugi ciljni format.</qt>"
-
-#: kprinterimpl.cpp:441
-msgid "Filtering print data"
-msgstr "Filtriram podatke za štampu"
-
-#: kprinterimpl.cpp:445
-msgid "Error while filtering. Command was: <b>%1</b>."
-msgstr "Greška prilikom filtriranja. Naredba je bila: <b>%1</b>."
-
-#: kprinterimpl.cpp:487
-msgid "<qt>The print file is empty and will be ignored:<p>%1</p></qt>"
-msgstr "<qt>Datoteka za štampu je prazna i biće ignorisana:<p>%1</p></qt>"
-
-#: kprinterimpl.cpp:497
-msgid ""
-"<qt>The file format <em> %1 </em> is not directly supported by the current "
-"print system. You now have 3 options: "
-"<ul> "
-"<li> TDE can attempt to convert this file automatically to a supported format. "
-"(Select <em>Convert</em>) </li>"
-"<li> You can try to send the file to the printer without any conversion. "
-"(Select <em>Keep</em>) </li>"
-"<li> You can cancel the printjob. (Select <em>Cancel</em>) </li></ul> "
-"Do you want TDE to attempt and convert this file to %2?</qt>"
-msgstr ""
-"Trenutni sistem štampe ne podržava direktno format datoteke %1. TDE može "
-"pokušati da automatski pretvori ovu datoteku u neki od podržanih formata. "
-"Također možete pokušati poslati datoteku štampaču bez ikakvog pretvaranja. "
-"Želite li da TDE proba pretvoriti ovu datoteku u %2?"
+#: cups/kmpropbanners.cpp:50
+msgid "Banner Settings"
+msgstr "Postavke trake"
 
-#: kprinterimpl.cpp:510 management/kmwname.cpp:62
-msgid "Keep"
-msgstr "Zadrži"
+#: cups/kmconfigcups.cpp:32
+msgid "CUPS Server"
+msgstr "CUPS server"
 
-#: kprinterimpl.cpp:518
-msgid ""
-"<qt>No appropriate filter was found to convert the file format %1 into %2."
-"<br>"
-"<ul>"
-"<li>Go to <i>System Options -> Commands</i> to look through the list of "
-"possible filters. Each filter executes an external program.</li>"
-"<li> See if the required external program is available.on your system.</li></ul>"
-"</qt>"
-msgstr ""
+#: cups/kmconfigcups.cpp:33
+msgid "CUPS Server Settings"
+msgstr "Postavke CUPS servera"
 
 #: tools/escputil/escpwidget.cpp:45
 msgid "EPSON InkJet Printer Utilities"
@@ -2767,15 +4921,6 @@ msgstr "Alati za EPSON InkJet štampače"
 msgid "&Use direct connection (might need root permissions)"
 msgstr "&Koristi direktnu vezu (možda će biti potrebne root privilegije)"
 
-#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99
-msgid "Printer:"
-msgstr "Štampač:"
-
-#: management/kminfopage.cpp:54 management/kminfopage.cpp:93
-#: tools/escputil/escpwidget.cpp:101
-msgid "Device:"
-msgstr "Uređaj:"
-
 #: tools/escputil/escpwidget.cpp:103
 msgid "Clea&n print head"
 msgstr "O&čisti glavu štampača"
@@ -2829,2327 +4974,180 @@ msgstr "Interna greška: ne mogu pokrenuti escputil proces."
 msgid "Operation terminated with errors."
 msgstr "Operacija je zaustavljena uz greške."
 
-#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217
-msgid "Output"
-msgstr "Izlaz"
-
-#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
-msgid "&Export..."
-msgstr "&Izvezi..."
-
-#: driver.cpp:385 foomatic2loader.cpp:268
-msgid "Adjustments"
-msgstr "Prilagodbe"
-
-#: kmprinter.cpp:144
-msgid "(rejecting jobs)"
-msgstr "(odbacujem zahtjeve)"
-
-#: kmprinter.cpp:144
-msgid "(accepting jobs)"
-msgstr "(prihvatam zahtjeve)"
-
-#: management/kmmainview.cpp:72
-msgid ""
-"The printer %1 already exists. Continuing will overwrite existing printer. Do "
-"you want to continue?"
-msgstr ""
-"Štampač %1 već postoji. Nastavak će prepisati postojeći štampač. Želite li "
-"nastaviti ?"
-
-#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
-#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
-msgid "Initializing manager..."
-msgstr "Inicijalizujem upravitelj..."
-
-#: management/kmmainview.cpp:180
-msgid "&Icons,&List,&Tree"
-msgstr "&Ikone,&Liste,&Stablo"
-
-#: management/kmmainview.cpp:184
-msgid "Start/Stop Printer"
-msgstr "Počni/prekini štampu"
-
-#: management/kmmainview.cpp:186
-msgid "&Start Printer"
-msgstr "&Počni štampu"
-
-#: management/kmmainview.cpp:187
-msgid "Sto&p Printer"
-msgstr "&Prekini štampu"
-
-#: management/kmmainview.cpp:189
-msgid "Enable/Disable Job Spooling"
-msgstr "Uključi/isključi spooliranje zadataka"
-
-#: management/kmmainview.cpp:191
-msgid "&Enable Job Spooling"
-msgstr "&Uključi spooliranje zadataka"
-
-#: management/kmmainview.cpp:192
-msgid "&Disable Job Spooling"
-msgstr "&Isključi spooliranje zadataka"
-
-#: management/kmmainview.cpp:195
-msgid "&Configure..."
-msgstr "&Podesi..."
-
-#: management/kmmainview.cpp:196
-msgid "Add &Printer/Class..."
-msgstr "Dodaj &štampač/razred..."
-
-#: management/kmmainview.cpp:197
-msgid "Add &Special (pseudo) Printer..."
-msgstr "Dodaj &poseban (pseudo) štampač..."
-
-#: management/kmmainview.cpp:198
-msgid "Set as &Local Default"
-msgstr "Postavi kao &lokalni podrazumjevani"
-
-#: management/kmmainview.cpp:199
-msgid "Set as &User Default"
-msgstr "Postavi kao &korisnički podrazumjevani"
-
-#: management/kmmainview.cpp:200
-msgid "&Test Printer..."
-msgstr "&Testiraj štampač..."
-
-#: management/kmmainview.cpp:201
-msgid "Configure &Manager..."
-msgstr "Podesi &menadžer..."
-
-#: management/kmmainview.cpp:202
-msgid "Initialize Manager/&View"
-msgstr "Inicijalizuj upravitelj/&Pogledaj"
-
-#: management/kmmainview.cpp:204
-msgid "&Orientation"
-msgstr "U&smjerenje"
-
-#: management/kmmainview.cpp:207
-msgid "&Vertical,&Horizontal"
-msgstr "&Uspravno, &Vodoravno"
-
-#: management/kmmainview.cpp:211
-msgid "R&estart Server"
-msgstr "R&estartaj server"
-
-#: management/kmmainview.cpp:212
-msgid "Configure &Server..."
-msgstr "Podesi &server..."
-
-#: management/kmmainview.cpp:213
-#, fuzzy
-msgid "Configure Server Access..."
-msgstr "Podesi &server..."
-
-#: management/kmmainview.cpp:216
-msgid "Hide &Toolbar"
-msgstr "Sakrij &traku alata"
-
-#: management/kmmainview.cpp:218
-msgid "Show Me&nu Toolbar"
-msgstr "Prikaži me&nije"
-
-#: management/kmmainview.cpp:219
-msgid "Hide Me&nu Toolbar"
-msgstr "Sakrij me&nije"
-
-#: management/kmmainview.cpp:221
-msgid "Show Pr&inter Details"
-msgstr "Prikaži &detalje štampača"
-
-#: management/kmmainview.cpp:222
-msgid "Hide Pr&inter Details"
-msgstr "Sakrij d&etalje štampača"
-
-#: management/kmmainview.cpp:226
-msgid "Toggle Printer &Filtering"
-msgstr "Prekidač &filtriranja štampača"
-
-#: management/kmmainview.cpp:230
-msgid "Pri&nter Tools"
-msgstr "&Alati za štampač"
-
-#: management/kmmainview.cpp:295
-msgid "Print Server"
-msgstr "Print server"
-
-#: management/kmmainview.cpp:301
-msgid "Print Manager"
-msgstr "Upravitelj štampom"
-
-#: management/kmmainview.cpp:334
-msgid "An error occurred while retrieving the printer list."
-msgstr "Došlo je do greške kod pribavljanja liste štampača."
-
-#: management/kmmainview.cpp:511
-#, c-format
-msgid "Unable to modify the state of printer %1."
-msgstr "Ne mogu izmijeniti stanje štampača %1."
-
-#: management/kmmainview.cpp:522
-msgid "Do you really want to remove %1?"
-msgstr "Da li stvarno želite obrisati %1?"
-
-#: management/kmmainview.cpp:526
-#, c-format
-msgid "Unable to remove special printer %1."
-msgstr "Ne mogu izbrisati posebni štampač %1."
-
-#: management/kmmainview.cpp:529
-#, c-format
-msgid "Unable to remove printer %1."
-msgstr "Ne mogu izbrisati štampač %1."
-
-#: management/kmmainview.cpp:559
-#, c-format
-msgid "Configure %1"
-msgstr "Podesi %1"
-
-#: management/kmmainview.cpp:566
-#, c-format
-msgid "Unable to modify settings of printer %1."
-msgstr "Ne mogu izmijeniti postavke štampača %1."
-
-#: management/kmmainview.cpp:570
-#, c-format
-msgid "Unable to load a valid driver for printer %1."
-msgstr "Ne mogu učitati ispravan drajver za štampač %1."
-
-#: management/kmmainview.cpp:582
-msgid "Unable to create printer."
-msgstr "Ne mogu napraviti štampač."
-
-#: management/kmmainview.cpp:594
-msgid "Unable to define printer %1 as default."
-msgstr "Ne mogu definisati štampač %1 kao uobičajeni."
-
-#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
-msgid "You are about to print a test page on %1. Do you want to continue?"
-msgstr "Upravo ćete odštampati testnu stranicu na %1. Želite li nastaviti?"
-
-#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
-msgid "Print Test Page"
-msgstr "Štampaj testnu stranicu"
-
-#: management/kminstancepage.cpp:270 management/kmmainview.cpp:632
-#, c-format
-msgid "Test page successfully sent to printer %1."
-msgstr "Testna stranica uspješno poslana na štampač %1."
-
-#: management/kmmainview.cpp:634
-#, c-format
-msgid "Unable to test printer %1."
-msgstr "Ne mogu testirati štampač %1."
-
-#: management/kmmainview.cpp:647
-msgid "Error message received from manager:</p><p>%1</p>"
-msgstr "Poruka o grešci koja je primljena od menadžera:</p><p>%1</p>"
-
-#: management/kmmainview.cpp:649
-msgid "Internal error (no error message)."
-msgstr "Interna greška (nema poruke o grešci)."
-
-#: management/kmmainview.cpp:667
-msgid "Unable to restart print server."
-msgstr "Ne mogu da restartujem print server."
-
-#: management/kmmainview.cpp:672
-msgid "Restarting server..."
-msgstr "Restartujem server..."
-
-#: management/kmmainview.cpp:682
-msgid "Unable to configure print server."
-msgstr "Ne mogu da podesim print server."
-
-#: management/kmmainview.cpp:687
-msgid "Configuring server..."
-msgstr "Podešavanje servera..."
-
-#: management/kmmainview.cpp:842
-msgid ""
-"Unable to start printer tool. Possible reasons are: no printer selected, the "
-"selected printer doesn't have any local device defined (printer port), or the "
-"tool library could not be found."
-msgstr ""
-"Ne mogu da pokrenem alat štampača. Mogući razlozi su: nije izabran štampač, "
-"izabrani štampač nema definisan nijedan lokalni uređaj (port) ili nije "
-"pronađena biblioteka alata."
-
-#: management/kmmainview.cpp:866
-msgid "Unable to retrieve the printer list."
-msgstr "Ne mogu da dobavim listu štampača."
-
-#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38
-msgid ""
-"_: Physical Location\n"
-"Location:"
-msgstr "Lokacija:"
-
-#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39
-#: management/kmwname.cpp:41
-msgid "Description:"
-msgstr "Opis:"
-
-#: management/kminfopage.cpp:56
-msgid "Model:"
-msgstr "Model:"
-
-#: management/kminfopage.cpp:92
-msgid "Members:"
-msgstr "Članovi:"
-
-#: management/kminfopage.cpp:112
-msgid "Implicit class"
-msgstr "Implicitna klasa"
-
-#: management/kminfopage.cpp:114
-msgid "Remote class"
-msgstr "Udaljena klasa"
+#: kprintprocess.cpp:75
+msgid "File transfer failed."
+msgstr "Transfer datoteke nije uspio."
 
-#: management/kminfopage.cpp:115
-msgid "Local class"
-msgstr "Lokalna klasa"
+#: kprintprocess.cpp:81
+msgid "Abnormal process termination (<b>%1</b>)."
+msgstr "Nenormalan prekid procesa (<b>%1</b>)."
 
-#: management/kminfopage.cpp:117
-msgid "Remote printer"
-msgstr "Udaljeni štampač"
+#: kprintprocess.cpp:83
+msgid "<b>%1</b>: execution failed with message:<p>%2</p>"
+msgstr "<b>%1</b>: izvršenje nije uspjelo uz poruku:<p>%2</p>"
 
-#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274
-#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342
-#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118
-msgid "Local printer"
-msgstr "Lokalni štampač"
+#: ppdloader.cpp:173
+msgid "(line %1): "
+msgstr "(linija %1): "
 
-#: management/kminfopage.cpp:120
-msgid "Special (pseudo) printer"
-msgstr "Posebni (pseudo) štampač"
+#: lpd/kmlpdmanager.cpp:87
+msgid "Local printer queue (%1)"
+msgstr "Lokalni red štampe (%1)"
 
-#: management/kminfopage.cpp:121
+#: lpd/kmlpdmanager.cpp:87
 msgid ""
-"_: Unknown class of printer\n"
+"_: Unknown type of local printer queue\n"
 "Unknown"
-msgstr "Nepoznato"
-
-#: management/kmpropcontainer.cpp:35
-msgid "Change..."
-msgstr "Promijeni..."
-
-#: management/kmwdrivertest.cpp:41
-msgid "Printer Test"
-msgstr "Test štampača"
-
-#: management/kmwdrivertest.cpp:51
-msgid "<b>Manufacturer:</b>"
-msgstr "<b>Proizvođač:</b>"
-
-#: management/kmwdrivertest.cpp:52
-msgid "<b>Model:</b>"
-msgstr "<b>Model:</b>"
-
-#: management/kmwdrivertest.cpp:53
-msgid "<b>Description:</b>"
-msgstr "<b>Opis:</b<"
-
-#: management/kmwdrivertest.cpp:55
-msgid "&Test"
-msgstr "&Test"
-
-#: management/kmwdrivertest.cpp:59
-msgid ""
-"<p>Now you can test the printer before finishing installation. Use the <b>"
-"Settings</b> button to configure the printer driver and the <b>Test</b> "
-"button to test your configuration. Use the <b>Back</b> "
-"button to change the driver (your current configuration will be discarded).</p>"
-msgstr ""
-"<p>Sada možete testirati štampač prije završetka instalacije. Koristite dugme "
-"<b>Postavke</b> da biste podesili drajver štampača, a dugme <b>Test</b> "
-"da biste isprobali vašu konfiguraciju. Koristite dugme <b>Nazad</b> "
-"da promijenite drajver (vaša trenutna konfiguracija će biti odbačena).</p>"
-
-#: management/kmwdrivertest.cpp:117
-msgid "<qt>Unable to load the requested driver:<p>%1</p></qt>"
-msgstr "<qt>Ne mogu učitati traženi drajver:<p>%1</p></qt>"
-
-#: management/kmwdrivertest.cpp:146
-msgid ""
-"Test page successfully sent to printer. Wait until printing is complete, then "
-"click the OK button."
-msgstr ""
-"Testna stranica je uspješno poslana štampaču. Sačekajte dok se štampanje "
-"završi, a zatim kliknite na dugme OK."
-
-#: management/kmwdrivertest.cpp:148
-msgid "Unable to test printer: "
-msgstr "Ne mogu testirati štampač:"
-
-#: management/kmwdrivertest.cpp:150
-msgid "Unable to remove temporary printer."
-msgstr "Ne mogu obrisati privremeni štampač."
-
-#: management/kmwdrivertest.cpp:153
-msgid "Unable to create temporary printer."
-msgstr "Ne mogu napraviti privremeni štampač."
-
-#: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:158
-msgid "No Printer"
-msgstr "Nema štampača"
-
-#: management/kmjobviewer.cpp:138 management/kmjobviewer.cpp:177
-#: management/kmjobviewer.cpp:194 management/kmjobviewer.cpp:210
-#: management/kmjobviewer.cpp:356 management/kmjobviewer.cpp:543
-msgid "All Printers"
-msgstr "Svi štampači"
-
-#: management/kmjobviewer.cpp:151
-#, c-format
-msgid "Print Jobs for %1"
-msgstr "Zadaci štampe za %1"
-
-#: management/kmjobviewer.cpp:170 management/kmjobviewer.cpp:172
-#: management/kmjobviewer.cpp:336
-#, c-format
-msgid "Max.: %1"
-msgstr "Maks.: %1"
-
-#: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:170
-#: management/kmjobviewer.cpp:336
-msgid "Unlimited"
-msgstr "Neograničeno"
-
-#: management/kmjobviewer.cpp:235
-msgid "Job ID"
-msgstr "ID zadatka"
-
-#: management/kmjobviewer.cpp:236
-msgid "Owner"
-msgstr "Vlasnik"
-
-#: management/kmjobviewer.cpp:238
-msgid ""
-"_: Status\n"
-"State"
-msgstr "Status"
-
-#: management/kmjobviewer.cpp:239
-msgid "Size (KB)"
-msgstr "Veličina (KB)"
-
-#: management/kmjobviewer.cpp:240
-msgid "Page(s)"
-msgstr "Stranica"
-
-#: management/kmjobviewer.cpp:262
-msgid "&Hold"
-msgstr "&Zadrži"
-
-#: management/kmjobviewer.cpp:263
-msgid "&Resume"
-msgstr "&Nastavi"
-
-#: management/kmjobviewer.cpp:264
-msgid "Remo&ve"
-msgstr "&Ukloni"
-
-#: management/kmjobviewer.cpp:265
-msgid "Res&tart"
-msgstr "&Restartuj"
-
-#: management/kmjobviewer.cpp:266
-msgid "&Move to Printer"
-msgstr "&Pomjeri na štampač..."
-
-#: management/kmjobviewer.cpp:272
-msgid "&Toggle Completed Jobs"
-msgstr "Pre&kidač završenih zadataka"
-
-#: management/kmjobviewer.cpp:275
-msgid "Show Only User Jobs"
-msgstr "Pokaži samo zadatke korisnika"
-
-#: management/kmjobviewer.cpp:276
-msgid "Hide Only User Jobs"
-msgstr "Sakrij samo zadatke korisnika"
-
-#: management/kmjobviewer.cpp:284
-msgid "User Name"
-msgstr "Korisničko ime"
-
-#: management/kmjobviewer.cpp:301
-msgid "&Select Printer"
-msgstr "&Izaberite štampač"
-
-#: management/kmjobviewer.cpp:330
-msgid "Refresh"
-msgstr "Osvježi"
-
-#: management/kmjobviewer.cpp:334
-msgid "Keep window permanent"
-msgstr "Trajno sačuvaj prozor"
-
-#: management/kmjobviewer.cpp:479
-msgid ""
-"Unable to perform action \"%1\" on selected jobs. Error received from manager:"
-msgstr ""
-"Ne mogu da izvršim akciju \"%1\" na izabranim zadacima. Greška koja je "
-"primljena od menadžera:"
-
-#: management/kmjobviewer.cpp:491
-msgid "Hold"
-msgstr "Zadrži"
-
-#: management/kmjobviewer.cpp:496
-msgid "Resume"
-msgstr "Nastavi"
-
-#: management/kmjobviewer.cpp:506
-msgid "Restart"
-msgstr "Ponovi"
-
-#: management/kmjobviewer.cpp:514
-#, c-format
-msgid "Move to %1"
-msgstr "Pomjeri na %1"
-
-#: management/kmjobviewer.cpp:674
-msgid "Operation failed."
-msgstr "Operacija nije uspjela."
-
-#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:699
-msgid "Print Job Settings"
-msgstr "Postavke zadataka štampe"
-
-#: management/kmconfigcommand.cpp:33
-msgid "Commands"
-msgstr "Naredbe"
-
-#: management/kmconfigcommand.cpp:34
-msgid "Command Settings"
-msgstr "Postavke naredbe"
-
-#: management/kmconfigcommand.cpp:37
-msgid "Edit/Create Commands"
-msgstr "Izmijeni/napravi naredbe"
-
-#: management/kmconfigcommand.cpp:39
-msgid ""
-"<p>Command objects perform a conversion from input to output."
-"<br>They are used as the basis to build both print filters and special "
-"printers. They are described by a command string, a set of options, a set of "
-"requirements and associated mime types. Here you can create new command objects "
-"and edit existing ones. All changes will only be effective for you."
-msgstr ""
-"<p>Naredbeni objekti vrše pretvorbu ulaza u izlaz."
-"<br>Oni se koriste i kao osnova za izgradnju filtera štampe i za posebne "
-"štampače. Oni se opisuju naredbenim stringom, skupom opcija, skupom zahtjeva i "
-"pridruženim MIME tipovima. Ovdje možete napraviti nove naredbene objekte ili "
-"izmijeniti postojeće. Sve promjene će se odnositi samo na vas."
-
-#: management/tdeprint_management_module.cpp:48
-msgid "Select Command"
-msgstr "Izaberite naredbu"
-
-#: management/kmwbackend.cpp:54
-msgid "Backend Selection"
-msgstr "Izbor backend-a"
-
-#: management/kmwbackend.cpp:68
-msgid "You must select a backend."
-msgstr "Morate izabrati backend."
-
-#: management/kmwbackend.cpp:115
-msgid "&Local printer (parallel, serial, USB)"
-msgstr "&Lokalni štampač (paralelni, serijski, USB)"
-
-#: management/kmwbackend.cpp:116
-msgid ""
-"<qt>"
-"<p>Locally-connected printer</p>"
-"<p>Use this for a printer connected to the computer via a parallel, serial or "
-"USB port.</p></qt>"
-msgstr ""
-"<qt>"
-"<p>Lokalno spojen štampač</p>"
-"<p>Koristite ovo za štampač spojen na računar putem paralelnog, serijskog ili "
-"USB porta.</p></qt>"
-
-#: management/kmwbackend.cpp:122
-msgid "&SMB shared printer (Windows)"
-msgstr "&SMB dijeljeni štampač (Windows)"
-
-#: management/kmwbackend.cpp:123
-msgid ""
-"<qt>"
-"<p>Shared Windows printer</p>"
-"<p>Use this for a printer installed on a Windows server and shared on the "
-"network using the SMB protocol (samba).</p></qt>"
-msgstr ""
-"<qt>"
-"<p>Dijeljeni Windows štampač</p>"
-"<p>Koristite ovo za štampač instaliran na Windows serveru i dijeljen na mreži "
-"korištenjem SMB protokola (samba).</p></qt>"
-
-#: management/kmwbackend.cpp:130
-msgid "&Remote LPD queue"
-msgstr "&Udaljeni LPD red"
-
-#: management/kmwbackend.cpp:131
-msgid ""
-"<qt>"
-"<p>Print queue on a remote LPD server</p>"
-"<p>Use this for a print queue existing on a remote machine running a LPD print "
-"server.</p></qt>"
-msgstr ""
-"<qt>"
-"<p>Red štampe na udaljenom LPD serveru</p>"
-"<p>Koristite ovo za red štampe koji se nalazi na udaljenoj mašini na kojoj se "
-"izvršava LPD server štampe.</p></qt>"
-
-#: management/kmwbackend.cpp:137
-msgid "Ne&twork printer (TCP)"
-msgstr "M&režni štampač (TCP)"
-
-#: management/kmwbackend.cpp:138
-msgid ""
-"<qt>"
-"<p>Network TCP printer</p>"
-"<p>Use this for a network-enabled printer using TCP (usually on port 9100) as "
-"communication protocol. Most network printers can use this mode.</p></qt>"
-msgstr ""
-"<qt>"
-"<p>Mrežni TCP štampač</p>"
-"<p>Koristite ovo za mrežni štampač koji koristi TCP kao svoj komunikacioni "
-"protokol (obično na portu 9100). Većina mrežnih štampača može koristiti ovaj "
-"režim.</p></qt>"
-
-#: management/kmwfile.cpp:35
-msgid "File Selection"
-msgstr "Odabir datoteke"
-
-#: management/kmwfile.cpp:41
-msgid ""
-"<p>The printing will be redirected to a file. Enter here the path of the file "
-"you want to use for redirection. Use an absolute path or the browse button for "
-"graphical selection.</p>"
-msgstr ""
-"<p>Štampanje će biti preusmjereno u datoteku. Ovdje unesite put do datoteke "
-"koju želite koristiti za preusmjerenje. Koristite apsolutni put ili dugme "
-"\"Potraži\" za grafički izbor.</p>"
-
-#: management/kmwfile.cpp:44
-msgid "Print to file:"
-msgstr "Štampaj u datoteku:"
-
-#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60
-msgid "Empty file name."
-msgstr "Prazan prostor za ime datoteke."
-
-#: management/kmwfile.cpp:66
-msgid "Directory does not exist."
-msgstr "Direktorij ne postoji."
-
-#: management/kmdriverdbwidget.cpp:51
-msgid "&PostScript printer"
-msgstr "&PostScript štampač"
-
-#: management/kmdriverdbwidget.cpp:52
-msgid "&Raw printer (no driver needed)"
-msgstr "&Sirova štampa (nije potreban drajver)"
-
-#: management/kmdriverdbwidget.cpp:55
-msgid "&Other..."
-msgstr "&Ostalo..."
-
-#: management/kmdriverdbwidget.cpp:56
-msgid "&Manufacturer:"
-msgstr "&Proizvođač:"
-
-#: management/kmdriverdbwidget.cpp:57
-msgid "Mo&del:"
-msgstr "Mo&del:"
-
-#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166
-msgid "Loading..."
-msgstr "Otvaram..."
-
-#: management/kmdriverdbwidget.cpp:217
-msgid "Unable to find the PostScript driver."
-msgstr "Ne mogu pronaći PostScript drajver."
-
-#: management/kmdriverdbwidget.cpp:230
-msgid "Select Driver"
-msgstr "Izaberite drajver"
-
-#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249
-msgid "<Unknown>"
-msgstr "<Nepoznat>"
-
-#: management/kmdriverdbwidget.cpp:252
-msgid "Database"
-msgstr "Baza podataka"
-
-#: management/kmdriverdbwidget.cpp:259
-msgid "Wrong driver format."
-msgstr "Pogrešan format drajvera"
-
-#: management/kmdriverdbwidget.cpp:268
-msgid "Other"
-msgstr "Ostalo"
-
-#: management/networkscanner.cpp:104 management/networkscanner.cpp:184
-msgid "Sc&an"
-msgstr "Pr&etraži"
-
-#: management/networkscanner.cpp:111
-msgid "Network scan:"
-msgstr "Pretraga mreže:"
-
-#: management/networkscanner.cpp:112 management/networkscanner.cpp:299
-#: management/networkscanner.cpp:310
-#, c-format
-msgid "Subnet: %1"
-msgstr "Subnet: %1"
-
-#: management/networkscanner.cpp:161
-msgid ""
-"You are about to scan a subnet (%1.*) that does not correspond to the current "
-"subnet of this computer (%2.*). Do you want to scan the specified subnet "
-"anyway?"
-msgstr ""
-"Upravo ćete preskenirati subnet (%1.*) koji ne odgovara trenutnom subnetu ovog "
-"računara (%2.*). Želite li svejedno izvršiti skeniranje?"
-
-#: management/networkscanner.cpp:164
-msgid "&Scan"
-msgstr "&Skeniraj"
-
-#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338
-msgid "&Subnetwork:"
-msgstr "Pod&mreža"
-
-#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340
-msgid "&Timeout (ms):"
-msgstr "&Vrijeme čekanja (ms)"
-
-#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378
-msgid "Scan Configuration"
-msgstr "Postavke pretrage"
-
-#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110
-#: management/networkscanner.cpp:390 management/networkscanner.cpp:396
-msgid "Wrong subnetwork specification."
-msgstr "Navedena je neispravna podmreža."
-
-#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404
-msgid "Wrong timeout specification."
-msgstr "Dato je pogrešno vrijeme čekanja."
-
-#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407
-msgid "Wrong port specification."
-msgstr "Dat je pogrešan port."
-
-#: management/kxmlcommandselector.cpp:54
-msgid "New command"
-msgstr "Nova naredba"
-
-#: management/kxmlcommandselector.cpp:55
-msgid "Edit command"
-msgstr "Izmijeni naredbu"
-
-#: management/kxmlcommandselector.cpp:72
-msgid "&Browse..."
-msgstr "Po&traži..."
-
-#: management/kxmlcommandselector.cpp:73
-msgid "Use co&mmand:"
-msgstr "Koristi &naredbu:"
-
-#: management/kxmlcommandselector.cpp:174
-msgid "Command Name"
-msgstr "Ime naredbe"
-
-#: management/kxmlcommandselector.cpp:174
-msgid "Enter an identification name for the new command:"
-msgstr "Unesite identifikaciono ime za novu naredbu:"
-
-#: management/kxmlcommandselector.cpp:183
-msgid ""
-"A command named %1 already exists. Do you want to continue and edit the "
-"existing one?"
-msgstr ""
-"Naredba pod imenom %1 već postoji. Želite li nastaviti i izmijeniti postojeću?"
-
-#: management/kxmlcommandselector.cpp:220
-msgid "Internal error. The XML driver for the command %1 could not be found."
-msgstr "Interna greška. Nisam pronašao XML drajver za naredbu %1."
-
-#: management/kxmlcommandselector.cpp:238
-msgid "output"
-msgstr "izlaz"
-
-#: management/kxmlcommandselector.cpp:242
-msgid "undefined"
-msgstr "neodređeno"
-
-#: management/kxmlcommandselector.cpp:247
-msgid "not allowed"
-msgstr "nije dozvoljeno"
-
-#: management/kxmlcommandselector.cpp:253
-msgid "(Unavailable: requirements not satisfied)"
-msgstr "(Nedostupno: nisu zadovoljeni zahtjevi)"
-
-#: management/kmconfigpreview.cpp:35
-msgid "Preview"
-msgstr "Pregled"
-
-#: management/kmconfigpreview.cpp:36
-msgid "Preview Settings"
-msgstr "Postavke pregleda"
-
-#: management/kmconfigpreview.cpp:39
-msgid "Preview Program"
-msgstr "Program za pregled"
-
-#: management/kmconfigpreview.cpp:41
-msgid "&Use external preview program"
-msgstr "&Koristi vanjski program za pregled"
-
-#: management/kmconfigpreview.cpp:44
-msgid ""
-"You can use an external preview program (PS viewer) instead of the TDE built-in "
-"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
-"found, TDE tries automatically to find another external PostScript viewer"
-msgstr ""
-"Možete koristiti neki vanjski program za pregled (PS preglednik) umjesto "
-"TDEovog ugrađenog sistema za pregled. Obratite pažnju da ako nema TDEovog "
-"podrazumjevanog PS preglednika (KGhostView), TDE automatski pokušava naći neki "
-"drugi vanjski PostScript preglednik"
-
-#: management/kmwclass.cpp:37
-msgid "Class Composition"
-msgstr "Kreiranje razreda"
-
-#: management/kmwclass.cpp:52
-msgid "Available printers:"
-msgstr "Dostupni štampači:"
-
-#: management/kmwclass.cpp:53
-msgid "Class printers:"
-msgstr "Štampači klase:"
-
-#: management/kmwclass.cpp:79
-msgid "You must select at least one printer."
-msgstr "Morate izabrati bar jedan štampač."
-
-#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59
-msgid "Members"
-msgstr "Članovi"
-
-#: management/kmpropmembers.cpp:40
-msgid "Class Members"
-msgstr "Članovi razreda"
-
-#: management/kaddprinterwizard.cpp:10
-msgid "Configure TDE Print"
-msgstr "Podesi TDE štampu"
-
-#: management/kaddprinterwizard.cpp:11
-msgid "Configure print server"
-msgstr "Podesi server štampe"
-
-#: management/kaddprinterwizard.cpp:18
-msgid "Start the add printer wizard"
-msgstr "Pokreni čarobnjak za dodavanje štampača"
-
-#: management/kmpropwidget.cpp:50
-msgid ""
-"<qt>Unable to change printer properties. Error received from manager:"
-"<p>%1</p></qt>"
-msgstr ""
-"<qt>Ne mogu da promijenim osobine štampača. Greška koja je primljena od "
-"menadžera:"
-"<p>%1</p></qt>"
-
-#: management/kmdbcreator.cpp:92
-msgid ""
-"No executable defined for the creation of the driver database. This operation "
-"is not implemented."
-msgstr ""
-"Nije definisana izvršna datoteka za pravljenje baze drajvera. Ova operacija "
-"nije implementirana."
-
-#: management/kmdbcreator.cpp:95
-msgid ""
-"The executable %1 could not be found in your PATH. Check that this program "
-"exists and is accessible in your PATH variable."
-msgstr ""
-"Ne mogu naći izvršnu datoteku %1 u vašem PATHu. Provjerite da li ovaj program "
-"postoji i da li je dostupan u vašoj PATH promjenljivoj."
-
-#: management/kmdbcreator.cpp:99
-msgid ""
-"Unable to start the creation of the driver database. The execution of %1 "
-"failed."
-msgstr "Ne mogu pokrenuti pravljenje baze drajvera. Izvršenje %1 nije uspjelo."
-
-#: management/kmdbcreator.cpp:113
-msgid "Please wait while TDE rebuilds a driver database."
-msgstr "Molimo sačekajte dok TDE izgradi bazu drajvera."
-
-#: management/kmdbcreator.cpp:114
-msgid "Driver Database"
-msgstr "Baza drajvera"
-
-#: management/kmdbcreator.cpp:171
-msgid ""
-"Error while creating driver database: abnormal child-process termination."
-msgstr ""
-"Greška prilikom pravljenja baze drajvera: nenormalan prekid procesa-djeteta."
-
-#: management/kmwname.cpp:34
-msgid "General Information"
-msgstr "Opće informacije"
-
-#: management/kmwname.cpp:37
-msgid ""
-"<p>Enter the information concerning your printer or class. <b>Name</b> "
-"is mandatory, <b>Location</b> and <b>Description</b> "
-"are not (they may even not be used on some systems).</p>"
-msgstr ""
-"<p>Unesite informacije koje se tiču vašeg štampača ili razreda.. <b>Ime</b> "
-"je obavezno, <b>Lokacija</b> i <b>Opis</b> nisu (na nekim sistemima možda neće "
-"biti ni korišteni).</p>"
-
-#: management/kmwname.cpp:39
-msgid "Name:"
-msgstr "Ime:"
-
-#: management/kmwname.cpp:48
-msgid "You must supply at least a name."
-msgstr "Morate navesti bar ime."
-
-#: management/kmwname.cpp:56
-msgid ""
-"It is usually not a good idea to include spaces in printer name: it may prevent "
-"your printer from working correctly. The wizard can strip all spaces from the "
-"string you entered, resulting in %1; what do you want to do?"
-msgstr ""
-"Obično nije pametno stavljati razmake u ime štampača. To može izazvati da vaš "
-"štampač ne radi kako treba. Čarobnjak može pobrisati razmake iz teksta koji se "
-"unijeli, što će dati ovaj rezultat: %1. Šta želite uraditi?"
-
-#: management/kmwname.cpp:62
-msgid "Strip"
-msgstr "Pobriši razmake"
-
-#: management/kmwdriver.cpp:80 management/kmwend.cpp:106
-#: management/kmwname.cpp:83
-msgid "Raw printer"
-msgstr "Sirovi štampač"
-
-#: management/kmwpassword.cpp:37
-msgid "User Identification"
-msgstr "Identifikacija korisnika"
-
-#: management/kmwpassword.cpp:43
-msgid ""
-"<p>This backend may require a login/password to work properly. Select the type "
-"of access to use and fill in the login and password entries if needed.</p>"
-msgstr ""
-"<p>Ovaj backend može zahtijevati login/šifru da bi ispravno radio. Izaberite "
-"vrstu pristupa koju ćete koristiti i popunite polja za login i šifru ako je "
-"potrebno.</p>"
-
-#: management/kmwpassword.cpp:49
-msgid "&Login:"
-msgstr "&Login:"
-
-#: management/kmwpassword.cpp:53
-msgid "&Anonymous (no login/password)"
-msgstr "&Anonimno (bez logina/šifre)"
-
-#: management/kmwpassword.cpp:54
-msgid "&Guest account (login=\"guest\")"
-msgstr "&Gostujući račun (login=\"guest\")"
-
-#: management/kmwpassword.cpp:55
-msgid "Nor&mal account"
-msgstr "O&bičan račun"
-
-#: management/kmwpassword.cpp:88
-msgid "Select one option"
-msgstr "Izaberite neku opciju"
-
-#: management/kmwpassword.cpp:90
-msgid "User name is empty."
-msgstr "Mjesto za korisničko ime je prazno."
-
-#: management/kmwdriverselect.cpp:37
-msgid "Driver Selection"
-msgstr "Odabir drajvera"
-
-#: management/kmwdriverselect.cpp:43
-msgid ""
-"<p>Several drivers have been detected for this model. Select the driver you "
-"want to use. You will have the opportunity to test it as well as to change it "
-"if necessary.</p>"
-msgstr ""
-"<p>Otkriveno je nekoliko drarjvera za ovaj model. Izaberite onaj drajver koji "
-"želite koristiti. Imaćete mogućnost da ga testirate te da ga promijenite ako to "
-"bude potrebno.</p>"
-
-#: management/kmwdriverselect.cpp:46
-msgid "Driver Information"
-msgstr "Informacije o drajveru"
-
-#: management/kmwdriverselect.cpp:62
-msgid "You must select a driver."
-msgstr "Morate odabrati drajver."
-
-#: management/kmwdriverselect.cpp:82
-msgid " [recommended]"
-msgstr " [preporučeno]"
-
-#: management/kmwdriverselect.cpp:113
-msgid "No information about the selected driver."
-msgstr "Nema informacija o izabranom drajveru."
-
-#: management/kmpropbackend.cpp:34
-msgid "Printer type:"
-msgstr "Tip štampača:"
-
-#: management/kmpropbackend.cpp:48
-msgid "Interface"
-msgstr "Interface"
-
-#: management/kmpropbackend.cpp:49
-msgid "Interface Settings"
-msgstr "Postavke interface-a"
-
-#: management/kmpropbackend.cpp:62
-msgid "IPP Printer"
-msgstr "IPP štampač"
-
-#: management/kmpropbackend.cpp:63
-msgid "Local USB Printer"
-msgstr "Lokalni USB štampač"
-
-#: management/kmpropbackend.cpp:64
-msgid "Local Parallel Printer"
-msgstr "Lokalni paralelni štampač"
-
-#: management/kmpropbackend.cpp:65
-msgid "Local Serial Printer"
-msgstr "Lokalni serijski štampač"
-
-#: management/kmpropbackend.cpp:66
-msgid "Network Printer (socket)"
-msgstr "Mrežni štampač (socket)"
-
-#: management/kmpropbackend.cpp:67
-msgid "SMB printers (Windows)"
-msgstr "SMB štampači (Windows)"
-
-#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68
-#: rlpr/kmwrlpr.cpp:116
-msgid "Remote LPD queue"
-msgstr "Udaljeni LPD red"
-
-#: management/kmpropbackend.cpp:69
-msgid "File printer"
-msgstr "Datotečni štampač"
+msgstr "Nepoznat"
 
-#: management/kmpropbackend.cpp:70
-msgid "Serial Fax/Modem printer"
-msgstr "Serijski fax/modem štampač"
+#: lpd/kmlpdmanager.cpp:88
+msgid "<Not available>"
+msgstr "<Nije dostupno>"
 
-#: management/kmpropbackend.cpp:71
+#: lpd/kmlpdmanager.cpp:89
 msgid ""
-"_: Unknown Protocol\n"
+"_: Unknown Driver\n"
 "Unknown"
 msgstr "Nepoznat"
 
-#: management/kmconfigdialog.cpp:38
-msgid "TDE Print Configuration"
-msgstr "Postavke TDE štampe"
-
-#: management/kmpropdriver.cpp:36
-msgid "Manufacturer:"
-msgstr "Proizvođač:"
-
-#: management/kmpropdriver.cpp:37
-msgid "Printer model:"
-msgstr "Model štampača:"
-
-#: management/kmpropdriver.cpp:38
-msgid "Driver info:"
-msgstr "Drajver info:"
-
-#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53
-#: management/kmwend.cpp:104
-msgid "Driver"
-msgstr "Drajver"
-
-#: management/kmwsocket.cpp:38
-msgid "Network Printer Information"
-msgstr "Informacije o mrežnom štampaču"
-
-#: management/kmwsocket.cpp:48
-msgid "&Printer address:"
-msgstr "&Adresa štampača"
-
-#: management/kmwsocket.cpp:49
-msgid "P&ort:"
-msgstr "P&ort:"
-
-#: management/kmwsocket.cpp:99
-msgid "You must enter a printer address."
-msgstr "Morate navesti adresu štampača."
-
-#: management/kmwsocket.cpp:110
-msgid "Wrong port number."
-msgstr "Pogrešan broj porta."
-
-#: management/kmwizard.cpp:64 management/kmwizard.cpp:209
-msgid "&Next >"
-msgstr "&Sljedeći >>"
-
-#: management/kmwizard.cpp:66
-msgid "< &Back"
-msgstr "< &Nazad"
-
-#: management/kmwizard.cpp:131 management/kmwizard.cpp:166
-#: management/kmwizard.cpp:191
-msgid "Add Printer Wizard"
-msgstr "Čarobnjak za dodavanje štampača"
-
-#: management/kmwizard.cpp:166
-msgid "Modify Printer"
-msgstr "Izmijeni štampač"
-
-#: management/kmwizard.cpp:191
-msgid "Unable to find the requested page."
-msgstr "Ne mogu pronaći traženu stranicu."
-
-#: management/kmwizard.cpp:207 management/kmwizard.cpp:234
-msgid "&Finish"
-msgstr "&Završi"
-
-#: management/kmwinfopage.cpp:32
-msgid "Introduction"
-msgstr "Uvod"
-
-#: management/kmwinfopage.cpp:37
-#, fuzzy
-msgid ""
-"<p>Welcome,</p>"
-"<br>"
-"<p>This wizard will help to install a new printer on your computer. It will "
-"guide you through the various steps of the process of installing and "
-"configuring a printer for your printing system. At each step, you can always go "
-"back using the <b>Back</b> button.</p>"
-"<br>"
-"<p>We hope you enjoy this tool!</p>"
-"<br>"
-msgstr ""
-"<p>Dobro došli,</p>"
-"<br>"
-"<p>Ovaj čarobnjak će vam pomoći da instalirate novi štampač na vaš računar. On "
-"će vas voditi kroz razne korake procesa instalacije i podešavanja štampača za "
-"vaš sistem štampe. Na svakom koraku, uvijek možete ići nazad koristeći dugme <b>"
-"Nazad</b>.</p>"
-"<br>"
-"<p>Nadamo se da ćete uživati u ovom alatu !</p>"
-"<br><p align=right><i>TDE printing team.</i></p>"
-
-#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59
-msgid "Jobs"
-msgstr "Zadaci"
-
-#: management/kmconfigjobs.cpp:37
-msgid "Jobs Shown"
-msgstr "Prikazani zadaci"
-
-#: management/kmconfigjobs.cpp:42
-msgid "Maximum number of jobs shown:"
-msgstr "Maksimalan broj prikazanih zadataka:"
-
-#: management/kxmlcommanddlg.cpp:108
-msgid "Integer"
-msgstr "Cijeli broj"
-
-#: management/kxmlcommanddlg.cpp:109
-msgid "Float"
-msgstr "Decimalan broj"
-
-#: management/kxmlcommanddlg.cpp:110
-msgid "List"
-msgstr "Lista"
-
-#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115
-#: management/kxmlcommanddlg.cpp:866
-msgid "&Description:"
-msgstr "&Opis:"
-
-#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116
-msgid "&Format:"
-msgstr "&Format:"
-
-#: management/kxmlcommanddlg.cpp:118
-msgid "Default &value:"
-msgstr "Podrazumjevana &vrijednost:"
-
-#: management/kxmlcommanddlg.cpp:119
-msgid "Co&mmand:"
-msgstr "Na&redba:"
-
-#: management/kxmlcommanddlg.cpp:126
-msgid "&Persistent option"
-msgstr "&Trajna opcija"
-
-#: management/kxmlcommanddlg.cpp:128
-msgid "Va&lues"
-msgstr "Vri&jednosti"
-
-#: management/kxmlcommanddlg.cpp:136
-msgid "Minimum v&alue:"
-msgstr "Minimalna v&rijednost:"
-
-#: management/kxmlcommanddlg.cpp:137
-msgid "Ma&ximum value:"
-msgstr "Ma&ksimalna vrijednost:"
-
-#: management/kmwend.cpp:53 management/kmwend.cpp:112
-#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545
-msgid "Description"
-msgstr "Opis"
-
-#: management/kxmlcommanddlg.cpp:150
-msgid "Add value"
-msgstr "Dodaj vrijednost"
-
-#: management/kxmlcommanddlg.cpp:151
-msgid "Delete value"
-msgstr "Pobriši vrijednost"
-
-#: management/kxmlcommanddlg.cpp:153
-msgid "Apply changes"
-msgstr "Primijeni promjene"
-
-#: management/kxmlcommanddlg.cpp:154
-msgid "Add group"
-msgstr "Dodaj grupu"
-
-#: management/kxmlcommanddlg.cpp:155
-msgid "Add option"
-msgstr "Dodaj opciju"
-
-#: management/kxmlcommanddlg.cpp:156
-msgid "Delete item"
-msgstr "Obriši stavku"
-
-#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135
-msgid "Move up"
-msgstr "Pomakni gore"
-
-#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142
-msgid "Move down"
-msgstr "Pomakni dole"
-
-#: management/kxmlcommanddlg.cpp:162
-msgid "&Input From"
-msgstr "&Ulaz iz"
-
-#: management/kxmlcommanddlg.cpp:163
-msgid "O&utput To"
-msgstr "&Izlaz u"
-
-#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166
-msgid "File:"
-msgstr "Datoteka:"
-
-#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167
-msgid "Pipe:"
-msgstr "Pipa:"
-
-#: management/kxmlcommanddlg.cpp:285
-msgid ""
-"An identification string. Use only alphanumeric characters except spaces. The "
-"string <b>__root__</b> is reserved for internal use."
-msgstr ""
-"Identifikacioni string. Koristite samo alfanumeričke znakove osim razmaka. "
-"String <b>__root__</b> je rezervisan za internu upotrebu."
-
-#: management/kxmlcommanddlg.cpp:289
-msgid ""
-"A description string. This string is shown in the interface, and should be "
-"explicit enough about the role of the corresponding option."
-msgstr ""
-"Opisni string. Ovaj string će biti prikazan u interfejsu i treba dovoljno dobro "
-"opisati ulogu odgovarajuće opcije."
-
-#: management/kxmlcommanddlg.cpp:293
-msgid ""
-"The type of the option. This determines how the option is presented graphically "
-"to the user."
-msgstr ""
-"Vrsta opcije. Ovo određuje kako će opcija biti grafički prezentirana korisniku."
-
-#: management/kxmlcommanddlg.cpp:297
-msgid ""
-"The format of the option. This determines how the option is formatted for "
-"inclusion in the global command line. The tag <b>%value</b> "
-"can be used to represent the user selection. This tag will be replaced at "
-"run-time by a string representation of the option value."
-msgstr ""
-"Format opcije. Ovo određuje kako je opcija formatirana za uključivanje u "
-"globalnu komandnu liniju. Tag <b>%value</b> se može koristi za predstavljanje "
-"korisničkog izbora. Ovaj tag će prilikom izvršavanja biti zamijenjen znakovnom "
-"reprezentacijom vrijednosti opcije."
-
-#: management/kxmlcommanddlg.cpp:303
-msgid ""
-"The default value of the option. For non persistent options, nothing is added "
-"to the command line if the option has that default value. If this value does "
-"not correspond to the actual default value of the underlying utility, make the "
-"option persistent to avoid unwanted effects."
-msgstr ""
-"Podrazumijevana vrijednost za opciju. Za ne-trajne opcije, ništa nije dodato u "
-"komandnu liniju ako opcija ima podrazumijevanu vrijednost. Ako ova vrijednost "
-"ne odražava stvarnu podrazumijevanu vrijednost odgovarajućeg alata, načinite "
-"ovu opciju trajnom da biste izbjegli neželjene efekte."
-
-#: management/kxmlcommanddlg.cpp:309
-msgid ""
-"Make the option persistent. A persistent option is always written to the "
-"command line, whatever its value. This is useful when the chosen default value "
-"does not match with the actual default value of the underlying utility."
-msgstr ""
-"Učini opciju trajnom. Trajna opcija je uvijek upisana u komandnu liniju, bez "
-"obzira kakva joj je vrijednost. Ovo je korisno kada se odabrana podrazumijevana "
-"vrijednost ne poklapa sa podrazumijevanom vrijednošću odgovarajućeg alata."
-
-#: management/kxmlcommanddlg.cpp:313
-#, c-format
-msgid ""
-"The full command line to execute the associated underlying utility. This "
-"command line is based on a mechanism of tags that are replaced at run-time. The "
-"supported tags are:"
-"<ul>"
-"<li><b>%filterargs</b>: command options</li>"
-"<li><b>%filterinput</b>: input specification</li>"
-"<li><b>%filteroutput</b>: output specification</li>"
-"<li><b>%psu</b>: the page size in upper case</li>"
-"<li><b>%psl</b>: the page size in lower case</li></ul>"
-msgstr ""
-"Puna komandna linija za izvršavanje pridruženog alata. Ova komandna linija je "
-"bazirana na mehanizmu tagova koju se zamijenjuju za vrijeme izvršavanja. "
-"Podržani tagovi su: "
-"<ul>"
-"<li><b>%filterargs</b>: komandne opcije</li>"
-"<li><b>%filterinput</b>: ulazna specifikacija</li>"
-"<li><b>%filteroutput</b>: izlazna specifikacija</li>"
-"<li><b>%psu</b>: veličina stranice sa velikim slovima</li>"
-"<li><b>%psl</b>: veličina stranice sa malim slovima</li></ul>"
-
-#: management/kxmlcommanddlg.cpp:323
-#, c-format
-msgid ""
-"Input specification when the underlying utility reads input data from a file. "
-"Use the tag <b>%in</b> to represent the input filename."
-msgstr ""
-"Ulazna specifikacija kada odgovarajući alat čita ulazne podatke iz datoteke. "
-"Koristite tag <b>%in</b> za oznaku imena datoteke."
-
-#: management/kxmlcommanddlg.cpp:327
-#, c-format
-msgid ""
-"Output specification when the underlying utility writes output data to a file. "
-"Use the tag <b>%out</b> to represent the output filename."
-msgstr ""
-"Izlazna specifikacija kada odgovarajući alat ispisuje izlazne podatke u "
-"datoteke. Koristite tag <b>%out</b> za oznaku imena datoteke."
-
-#: management/kxmlcommanddlg.cpp:331
-msgid ""
-"Input specification when the underlying utility reads input data from its "
-"standard input."
-msgstr ""
-"Ulazna specifikacija kada odgovarajući alat čita ulazne podatke sa svog "
-"standardnog ulaza."
-
-#: management/kxmlcommanddlg.cpp:335
-msgid ""
-"Output specification when the underlying utility writes output data to its "
-"standard output."
-msgstr ""
-"Izlazna specifikacija kada odgovarajući alat čita ulazne podatke sa svog "
-"standardnog ulaza."
-
-#: management/kxmlcommanddlg.cpp:339
-msgid ""
-"A comment about the underlying utility, which can be viewed by the user from "
-"the interface. This comment string supports basic HTML tags like &lt;a&gt;, "
-"&lt;b&gt; or &lt;i&gt;."
-msgstr ""
-"Komentar o odgovarajućem alatu, koji korisnik može vidjeti iz interfejsa. Ovaj "
-"komentarski string podržava osnovne HTML tagove kao &lt;a&gt;, &lt;b&gt; ili "
-"&lt;i&gt;."
-
-#: management/kxmlcommanddlg.cpp:568
-msgid ""
-"Invalid identification name. Empty strings and \"__root__\" are not allowed."
-msgstr ""
-"Neispravno ime za identifikaciju. Prazni stringovi i \"__root__\" nisu "
-"dozvoljeni."
-
-#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652
-msgid "New Group"
-msgstr "Nova grupa"
-
-#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671
-msgid "New Option"
-msgstr "Nova opcija"
-
-#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939
-#, c-format
-msgid "Command Edit for %1"
-msgstr "Izmjena naredbe za %1"
-
-#: management/kxmlcommanddlg.cpp:833
-msgid "&Mime Type Settings"
-msgstr "Postavke &MIME tipa"
-
-#: management/kxmlcommanddlg.cpp:839
-msgid "Supported &Input Formats"
-msgstr "Podržani formati &ulaza"
-
-#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840
-msgid "Requirements"
-msgstr "Zahtjevi"
-
-#: management/kxmlcommanddlg.cpp:851
-msgid "&Edit Command..."
-msgstr "&Izmijeni naredbu..."
-
-#: management/kxmlcommanddlg.cpp:868
-msgid "Output &format:"
-msgstr "&Format izlaza:"
-
-#: management/kxmlcommanddlg.cpp:870
-msgid "ID name:"
-msgstr "ID ime:"
-
-#: management/kxmlcommanddlg.cpp:1033
-msgid "exec:/"
-msgstr "exec:/"
-
-#: driver.cpp:377 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307
-#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54
-#: management/kmwend.cpp:49
-msgid "General"
-msgstr "Općenito"
-
-#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55
-msgid "General Settings"
-msgstr "Opće postavke"
-
-#: management/kmconfiggeneral.cpp:48
-msgid "Refresh Interval"
-msgstr "Interval osvježavanja"
-
-#: management/kmconfiggeneral.cpp:51
-msgid " sec"
-msgstr " sek"
-
-#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52
-msgid "Disabled"
-msgstr "Isključeno"
-
-#: management/kmconfiggeneral.cpp:53
-msgid ""
-"This time setting controls the refresh rate of various <b>TDE Print</b> "
-"components like the print manager and the job viewer."
-msgstr ""
-"Ova postavka vremena određuje brzinu osvježavanja na raznim <b>TDE Print</b> "
-"komponentama kao što su menadžer štampe ili preglednik zadataka."
-
-#: management/kmconfiggeneral.cpp:57
-msgid "Test Page"
-msgstr "Probna stranica"
-
-#: management/kmconfiggeneral.cpp:58
-msgid "&Specify personal test page"
-msgstr "&Koristi vlastitu probnu stranicu"
-
-#: management/kmconfiggeneral.cpp:60
-msgid "Preview..."
-msgstr "Pregled..."
-
-#: management/kmconfiggeneral.cpp:70
-msgid "Sho&w printing status message box"
-msgstr "Po&kaži poruku o statusu štampe"
-
-#: management/kmconfiggeneral.cpp:71
-msgid "De&faults to the last printer used in the application"
-msgstr "&Podrazumjevan je zadnji štampač koji je korišten u toj aplikaciji"
-
-#: management/kmconfiggeneral.cpp:127
-msgid ""
-"The selected test page is not a PostScript file. You may not be able to test "
-"your printer anymore."
-msgstr ""
-"Odabrana testna stranica nije PostScript datoteka. Više ne možete testirati vaš "
-"štampač."
-
-#: management/kminstancepage.cpp:61
-msgid ""
-"Define/Edit here instances for the current selected printer. An instance is a "
-"combination of a real (physical) printer and a set of predefined options. For a "
-"single InkJet printer, you could define different print formats like <i>"
-"DraftQuality</i>, <i>PhotoQuality</i> or <i>TwoSided</i>"
-". Those instances appear as normal printers in the print dialog and allow you "
-"to quickly select the print format you want."
-msgstr ""
-"Ovdje definišete / mijenjate instance za trenutno izabrani štampač. Instanca je "
-"kombinacija stvarnog (fizičkog) štampača i skupa predefinisanih opcija. Za "
-"jedan InkJet štampač, možete definisati dva različita formata štampe npr. <i>"
-"DraftKvalitet</i>, <i>FotoKvalitet</i> ili <i>Dvostrano</i>"
-". Ove instance se javljaju kao obični štampači u dijalogu štampe i omogućuju "
-"vam da brzo izaberete koji format štampe želite."
-
-#: management/kminstancepage.cpp:87
-msgid "New..."
-msgstr "Novo..."
-
-#: management/kminstancepage.cpp:88
-msgid "Copy..."
-msgstr "Kopiraj..."
-
-#: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91
-msgid "Set as Default"
-msgstr "Postavi uobičajeno"
-
-#: management/kminstancepage.cpp:92
-msgid "Settings"
-msgstr "Postavke..."
-
-#: management/kminstancepage.cpp:94
-msgid "Test..."
-msgstr "Test..."
-
-#: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126
-#: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145
-#: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164
-#: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190
-#: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210
-#: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260
-msgid "(Default)"
-msgstr "(Uobičajen)"
-
-#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
-msgid "Instance Name"
-msgstr "Naziv instance"
-
-#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
-msgid "Enter name for new instance (leave untouched for default):"
-msgstr "Unesite naziv za novu instancu (ostavite nedirnuto za uobičajeni):"
-
-#: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187
-msgid "Instance name must not contain any spaces or slashes."
-msgstr "Naziv instance ne smije sadržavati razmake ili kose crte."
-
-#: management/kminstancepage.cpp:161
-msgid "Do you really want to remove instance %1?"
-msgstr "Da li stvarno želite obrisati instancu %1?"
-
-#: management/kminstancepage.cpp:161
-msgid ""
-"You can't remove the default instance. However all settings of %1 will be "
-"discarded. Continue?"
-msgstr ""
-"Ne možete pobrisati podrazumjevanu instancu. Ipak sve postavke za %1 će biti "
-"izgubljene. Da nastavim?"
-
-#: management/kminstancepage.cpp:213
-#, c-format
-msgid "Unable to find instance %1."
-msgstr "Ne mogu pronaći instancu %1."
-
-#: management/kminstancepage.cpp:215
-#, c-format
-msgid ""
-"Unable to retrieve printer information. Message from printing system: %1."
-msgstr "Ne mogu dobaviti informacije o štampaču. Poruka sistema štampe: %1."
-
-#: management/kminstancepage.cpp:232
-msgid "The instance name is empty. Please select an instance."
-msgstr "Ime instance je prazno. Molim izaberite instancu."
-
-#: management/kminstancepage.cpp:264
-msgid "Internal error: printer not found."
-msgstr "Interna greška: štampač nije pronađen."
-
-#: management/kminstancepage.cpp:268
-#, c-format
-msgid "Unable to send test page to %1."
-msgstr "Nisam uspio poslati testnu stranicu na %1."
-
-#: management/kmdriverdialog.cpp:48
-msgid ""
-"Some options are in conflict. You must resolve those conflicts before "
-"continuing."
-msgstr ""
-"Neke od izabranih opcija su u konfliktu. Morate razriješiti te konflikte prije "
-"nastavka."
-
-#: management/kmlistview.cpp:125
-msgid "Print System"
-msgstr "Sistem štampe"
-
-#: management/kmlistview.cpp:128
-msgid "Classes"
-msgstr "Razredi"
-
-#: management/kmlistview.cpp:131
-msgid "Printers"
-msgstr "Štampači"
-
-#: management/kmlistview.cpp:134
-msgid "Specials"
-msgstr "Posebno"
-
-#: management/kmwlocal.cpp:38
-msgid "Local Port Selection"
-msgstr "Odabir lokalnog porta"
-
-#: management/kmwlocal.cpp:50
-msgid "Local System"
-msgstr "Lokalni sistem"
-
-#: management/kmwlocal.cpp:57
-msgid "Parallel"
-msgstr "Paralelni"
-
-#: management/kmwlocal.cpp:58
-msgid "Serial"
-msgstr "Serijski"
-
-#: management/kmwlocal.cpp:59
-msgid "USB"
-msgstr "USB"
-
-#: driver.cpp:389 management/kmwlocal.cpp:60
-msgid "Others"
-msgstr "Ostali"
-
-#: management/kmwlocal.cpp:63
-msgid ""
-"<p>Select a valid detected port, or enter directly the corresponding URI in the "
-"bottom edit field.</p>"
-msgstr ""
-"<p>Izaberite ispravan port među otkrivenim portovima ili direktno unesite "
-"odgovarajući URI u donje tekstualno polje.</p>"
-
-#: management/kmwlocal.cpp:78
-#, fuzzy
-msgid ""
-"_: The URI is empty\n"
-"Empty URI."
-msgstr ""
-"_: URI je razan\n"
-"Prazan URI."
-
-#: management/kmwlocal.cpp:83
-msgid "The local URI doesn't correspond to a detected port. Continue?"
-msgstr "Lokalni URI ne odgovara otkrivenom portu. Da nastavim?"
-
-#: management/kmwlocal.cpp:85
-msgid "Select a valid port."
-msgstr "Odaberite važeći port."
-
-#: management/kmwlocal.cpp:166
-msgid "Unable to detect local ports."
-msgstr "Ne mogu detektovati lokalne portove."
-
-#: management/kmwlpd.cpp:41
-msgid "LPD Queue Information"
-msgstr "Informacije o LPD redu"
-
-#: management/kmwlpd.cpp:44
-msgid ""
-"<p>Enter the information concerning the remote LPD queue; this wizard will "
-"check it before continuing.</p>"
-msgstr ""
-"<p>Unesite informacije koje se tiču udaljenog LPD reda štampe. Ovaj čarobnjak "
-"će ih provjeriti prije nastavka.</p>"
-
-#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63
-msgid "Queue:"
-msgstr "Red:"
-
-#: management/kmwlpd.cpp:54
-msgid "Some information is missing."
-msgstr "Neke informacije nedostaju."
-
-#: management/kmwlpd.cpp:61
-msgid "Cannot find queue %1 on server %2; do you want to continue anyway?"
-msgstr "Ne mogu naći red %1 na serveru %2. Želite li svejedno nastaviti?"
-
-#: management/kmconfigfilter.cpp:40
-msgid "Filter"
-msgstr "Filter"
-
-#: management/kmconfigfilter.cpp:41
-msgid "Printer Filtering Settings"
-msgstr "Postavke filtriranja štampača"
-
-#: management/kmconfigfilter.cpp:44
-msgid "Printer Filter"
-msgstr "Filter štampača"
-
-#: management/kmconfigfilter.cpp:56
-msgid ""
-"The printer filtering allows you to view only a specific set of printers "
-"instead of all of them. This may be useful when there are a lot of printers "
-"available but you only use a few ones. Select the printers you want to see from "
-"the list on the left or enter a <b>Location</b> filter (ex: Group_1*). Both are "
-"cumulative and ignored if empty."
-msgstr ""
-"Filtriranje štampača vam omogućuje da vidite samo određeni skup štampača "
-"umjesto sve. Ovo može biti korisno ako imate na raspolaganju mnogo štampača, od "
-"kojih koristite samo neke. Izaberite štampače koje želite vidjeti sa liste "
-"lijevo ili unesite <b>Filter lokacije</b> (npr: Group_1*). Oba su kumulativna i "
-"biće ignorisani ako su prazni."
-
-#: management/kmconfigfilter.cpp:62
-msgid "Location filter:"
-msgstr "Filter lokacije:"
-
-#: management/kmconfigfonts.cpp:43
-msgid "Font Settings"
-msgstr "Postavke fontova"
-
-#: management/kmconfigfonts.cpp:46
-msgid "Fonts Embedding"
-msgstr "Ugrađivanje fontova"
-
-#: management/kmconfigfonts.cpp:47
-msgid "Fonts Path"
-msgstr "Staza do fontova"
-
-#: management/kmconfigfonts.cpp:49
-msgid "&Embed fonts in PostScript data when printing"
-msgstr "&Ugradi fontove u PostScript podatke prilikom štampanja"
-
-#: management/kmconfigfonts.cpp:57
-msgid "&Up"
-msgstr "&Gore"
-
-#: management/kmconfigfonts.cpp:58
-msgid "&Down"
-msgstr "&Dole"
-
-#: management/kmconfigfonts.cpp:59
-msgid "&Add"
-msgstr "&Dodaj"
+#: lpd/kmlpdmanager.cpp:95
+msgid "Remote LPD queue %1@%2"
+msgstr "Udaljeni LPD red %1@%2"
 
-#: management/kmconfigfonts.cpp:61
-msgid "Additional director&y:"
-msgstr "Dodatni &direktorij:"
+#: lpd/kmlpdmanager.cpp:158
+msgid "Unable to create spool directory %1 for printer %2."
+msgstr "Ne mogu kreirati spool direktorij %1 za štampač <b>%2</b>."
 
-#: management/kmconfigfonts.cpp:85
-msgid ""
-"These options will automatically put fonts in the PostScript file which are not "
-"present on the printer. Font embedding usually produces better print results "
-"(closer to what you see on the screen), but larger print data as well."
-msgstr ""
-"Ova opcija automatski dodaje u PostScript datoteku fontove koji nisu prisutni u "
-"samom štampaču. Ugradnja fontova obično daje bolje rezultate štampe "
-"(približnije onome što vidite na ekranu), ali i više podataka koje treba "
-"štampati."
+#: lpd/kmlpdmanager.cpp:165
+msgid "Unable to save information for printer <b>%1</b>."
+msgstr "Ne mogu spasiti informacije za štampač <b>%1</b>."
 
-#: management/kmconfigfonts.cpp:89
+#: lpd/kmlpdmanager.cpp:193
 msgid ""
-"When using font embedding you can select additional directories where TDE "
-"should search for embeddable font files. By default, the X server font path is "
-"used, so adding those directories is not needed. The default search path should "
-"be sufficient in most cases."
+"Unable to set correct permissions on spool directory %1 for printer <b>%2</b>."
 msgstr ""
-"Kada koristite ugrađivanje fontova, možete izabrati dodatne direktorije gdje "
-"TDE treba tražiti ugradive datoteke fontova. Podrazumjevano je korištenje staze "
-"fontova X servera, tako da ne trebate dodavati te direktorije. Podrazumjevani "
-"put pretrage bi trebao biti dovoljan u većini slučajeva"
-
-#: management/kmspecialprinterdlg.cpp:46
-msgid "Add Special Printer"
-msgstr "Dodaj poseban štampač"
+"Ne mogu podesiti ispravne privilegije na spool direktoriju %1 za štampač <b>"
+"%2</b>."
 
-#: management/kmspecialprinterdlg.cpp:58
-msgid "&Location:"
-msgstr "&Lokacija:"
+#: lpd/kmlpdmanager.cpp:237
+msgid "Permission denied: you must be root."
+msgstr "Pristup odbijen: morate biti root."
 
-#: management/kmspecialprinterdlg.cpp:66
-msgid "Command &Settings"
-msgstr "&Postavke naredbe"
+#: lpd/kmlpdmanager.cpp:244
+msgid "Unable to execute command \"%1\"."
+msgstr "Ne mogu izvršiti naredbu \"%1\"."
 
-#: management/kmspecialprinterdlg.cpp:69
-msgid "Outp&ut File"
-msgstr "I&zlazna datoteka"
+#: lpd/kmlpdmanager.cpp:317
+msgid "Unable to write printcap file."
+msgstr "Ne mogu da pišem u printcap datoteku."
 
-#: management/kmspecialprinterdlg.cpp:71
-msgid "&Enable output file"
-msgstr "&Uključi izlaznu datoteku"
+#: lpd/kmlpdmanager.cpp:372
+msgid "Couldn't find driver <b>%1</b> in printtool database."
+msgstr "Nisam uspio pronaći drajver <b>%1</b> u printtool bazi."
 
-#: management/kmspecialprinterdlg.cpp:88
-msgid "Filename e&xtension:"
-msgstr "&Ekstenzija imena datoteke:"
+#: lpd/kmlpdmanager.cpp:411
+msgid "Couldn't find printer <b>%1</b> in printcap file."
+msgstr "Ne mogu naći štampač <b>%1</b> u printcap datoteci."
 
-#: management/kmspecialprinterdlg.cpp:105
-msgid ""
-"<p>The command will use an output file. If checked, make sure the command "
-"contains an output tag.</p>"
-msgstr ""
-"<p>Ova naredba će koristiti izlaznu datoteku. Ako je uključite, pobrinite se da "
-"naredba sadrži tag za izlaz.</p>"
+#: lpd/kmlpdmanager.cpp:440
+msgid "No driver found (raw printer)"
+msgstr "Nije pronađen drajver (sirova štampa)"
 
-#: management/kmspecialprinterdlg.cpp:108
-#, c-format
-msgid ""
-"<p>The command to execute when printing on this special printer. Either enter "
-"the command to execute directly, or associate/create a command object with/for "
-"this special printer. The command object is the preferred method as it provides "
-"support for advanced settings like mime type checking, configurable options and "
-"requirement list (the plain command is only provided for backward "
-"compatibility). When using a plain command, the following tags are "
-"recognized:</p>"
-"<ul>"
-"<li><b>%in</b>: the input file (required).</li>"
-"<li><b>%out</b>: the output file (required if using an output file).</li>"
-"<li><b>%psl</b>: the paper size in lower case.</li>"
-"<li><b>%psu</b>: the paper size with the first letter in upper case.</li></ul>"
-msgstr ""
-"<p>Naredba koja će se izvršiti kod štampanja na ovaj posebni štampač. Ili "
-"unesite naredbu koja će se izvršiti direktno ili povežite/napravite naredbeni "
-"objekat sa/za ovaj posebni štampač. Naredbeni objekat je preferirani metod zato "
-"što pruža podršku za napredne postavke kao što je provjera MIME tipa, podesive "
-"opcije i lista zahtjeva (obična naredba je omogućena samo radi kompatibilnosti "
-"unatrag). Kada koristite običnu naredbu, prepoznati su ovi tagovi:</p>"
-"<ul>"
-"<li><b>%in</b>: ulazna datoteka (obavezno).</li>"
-"<li><b>%out</b>: izlazna datoteka (obavezno ako koristite izlaznu "
-"datoteku).</li>"
-"<li><b>%psl</b>: veličina papira malim slovima.</li>"
-"<li><b>%psu</b>: veličina papira gdje je prvo slovo veliko.</li></ul>"
+#: lpd/kmlpdmanager.cpp:442
+msgid "Printer type not recognized."
+msgstr "Tip štampača nije prepoznat."
 
-#: management/kmspecialprinterdlg.cpp:118
+#: lpd/kmlpdmanager.cpp:452
 msgid ""
-"<p>The default mimetype for the output file (e.g. application/postscript).</p>"
-msgstr ""
-"<p>Podrazumjevani MIME tip za izlaznu datoteku (npr.: "
-"application/postscript).</p>"
-
-#: management/kmspecialprinterdlg.cpp:121
-msgid "<p>The default extension for the output file (e.g. ps, pdf, ps.gz).</p>"
+"The driver device <b>%1</b> is not compiled in your GhostScript distribution. "
+"Check your installation or use another driver."
 msgstr ""
-"<p>Podrazumjevana ekstenzija za izlaznu datoteku (npr.: ps, pdf, ps.gz).</p>"
-
-#: management/kmspecialprinterdlg.cpp:170
-msgid "You must provide a non-empty name."
-msgstr "Morate navesti ime koje nije prazno."
-
-#: management/kmspecialprinterdlg.cpp:178
-#, c-format
-msgid "Invalid settings. %1."
-msgstr "Neispravne postavke. %1"
-
-#: management/kmspecialprinterdlg.cpp:197
-#, c-format
-msgid "Configuring %1"
-msgstr "Podešavam %1"
-
-#: management/smbview.cpp:44
-msgid "Comment"
-msgstr "Komentar"
-
-#: management/kmwend.cpp:33
-msgid "Confirmation"
-msgstr "Odobrenje"
-
-#: management/kmwend.cpp:50 management/kmwend.cpp:106
-#: management/kmwend.cpp:109 tdefilelist.cpp:102
-msgid "Type"
-msgstr "Vrsta"
-
-#: management/kmwend.cpp:52
-msgid "Location"
-msgstr "Lokacija"
-
-#: management/kmwend.cpp:69
-msgid "Backend"
-msgstr "Backend"
-
-#: management/kmwend.cpp:74
-msgid "Device"
-msgstr "Uređaj"
-
-#: management/kmwend.cpp:77
-msgid "Printer IP"
-msgstr "IP štampača"
-
-#: management/kmwend.cpp:78 management/kmwend.cpp:89
-msgid "Port"
-msgstr "Port"
-
-#: management/kmwend.cpp:81 management/kmwend.cpp:88
-msgid "Host"
-msgstr "Računar"
-
-#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48
-msgid "Queue"
-msgstr "Red"
-
-#: management/kmwend.cpp:91
-msgid "Account"
-msgstr "Račun"
-
-#: management/kmwend.cpp:96
-msgid "URI"
-msgstr "URI"
-
-#: management/kmwend.cpp:109
-msgid "DB driver"
-msgstr "DB drajver"
-
-#: management/kmwend.cpp:109
-msgid "External driver"
-msgstr "Vanjski drajver"
-
-#: management/kmwend.cpp:110
-msgid "Manufacturer"
-msgstr "Proizvođač"
-
-#: management/kmwend.cpp:111
-msgid "Model"
-msgstr "Model"
-
-#: management/kmwdriver.cpp:33
-msgid "Printer Model Selection"
-msgstr "Izbor modela štampača"
-
-#: management/kmwdriver.cpp:113
-msgid "Internal error: unable to locate the driver."
-msgstr "Interna greška: ne mogu pronaći drajver."
-
-#: management/kmpropgeneral.cpp:37
-msgid "Printer name:"
-msgstr "Ime štampača:"
-
-#: management/kmwsmb.cpp:35
-msgid "SMB Printer Settings"
-msgstr "Postavke SMB štampača"
-
-#: management/kmwsmb.cpp:41
-msgid "Scan"
-msgstr "Pretraga"
-
-#: management/kmwsmb.cpp:42
-msgid "Abort"
-msgstr "Prekini"
-
-#: management/kmwsmb.cpp:44
-msgid "Workgroup:"
-msgstr "Radna grupa:"
-
-#: management/kmwsmb.cpp:45
-msgid "Server:"
-msgstr "Server:"
-
-#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45
-msgid "Empty printer name."
-msgstr "Prazno ime štampača."
-
-#: management/kmwsmb.cpp:99
-#, c-format
-msgid "Login: %1"
-msgstr "Login: %1"
-
-#: management/kmwsmb.cpp:99
-msgid "<anonymous>"
-msgstr "<anonymous>"
-
-#: management/kmpages.cpp:69
-msgid "Instances"
-msgstr "Instance"
-
-#: kpgeneralpage.cpp:86
-msgid "ISO A4"
-msgstr "ISO A4"
-
-#: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30
-msgid "US Letter"
-msgstr "US Letter"
-
-#: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29
-msgid "US Legal"
-msgstr "US Legal"
-
-#: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28
-msgid "Ledger"
-msgstr "Ledger"
-
-#: kpgeneralpage.cpp:90
-msgid "Folio"
-msgstr "Folio"
-
-#: kpgeneralpage.cpp:91
-msgid "US #10 Envelope"
-msgstr "US #10 Envelope"
-
-#: kpgeneralpage.cpp:92
-msgid "ISO DL Envelope"
-msgstr "ISO DL Envelope"
-
-#: kpgeneralpage.cpp:93
-msgid "Tabloid"
-msgstr "Tabloid"
-
-#: kpgeneralpage.cpp:94
-msgid "ISO A3"
-msgstr "ISO A3"
-
-#: kpgeneralpage.cpp:95
-msgid "ISO A2"
-msgstr "ISO A2"
-
-#: kpgeneralpage.cpp:96
-msgid "ISO A1"
-msgstr "ISO A1"
-
-#: kpgeneralpage.cpp:97
-msgid "ISO A0"
-msgstr "ISO A0"
-
-#: kpgeneralpage.cpp:107
-msgid "Upper Tray"
-msgstr "Gornji držač"
-
-#: kpgeneralpage.cpp:108
-msgid "Lower Tray"
-msgstr "Donji držač"
-
-#: kpgeneralpage.cpp:109
-msgid "Multi-Purpose Tray"
-msgstr "Višenamjenski držač"
-
-#: kpgeneralpage.cpp:110
-msgid "Large Capacity Tray"
-msgstr "Držač velikog kapaciteta"
+"Drajver uređaj <b>%1</b> nije kompajliran u vašu distribuciju GhostScript-a. "
+"Provjerite vašu instalaciju ili koristite neki drugi drajver."
 
-#: kpgeneralpage.cpp:114
-msgid "Normal"
-msgstr "Normalno"
+#: lpd/kmlpdmanager.cpp:560
+msgid "Unable to write driver associated files in spool directory."
+msgstr "Ne mogu da pišem u datoteke vezane za drajver u spool direktoriju."
 
-#: kpgeneralpage.cpp:115
-msgid "Transparency"
-msgstr "Providnost"
+#: lpd/kmlpduimanager.cpp:44
+msgid "Local printer (parallel, serial, USB)"
+msgstr "Lokalni štampač (paralelni, serijski, USB)"
 
-#: kpgeneralpage.cpp:124
-msgid ""
-" <qt>  "
-"<p><b>\"General\"</b> </p>  "
-"<p>This dialog page contains <em>general</em> print job settings. General "
-"settings are applicable to most printers, most jobs  and most job file types.  "
-"<p>To get more specific help, enable the \"WhatsThis\" cursor and click on any "
-"of the  text labels or GUI elements of this dialog.  </qt>"
-msgstr ""
+#: lpd/kmlpduimanager.cpp:46
+msgid "SMB shared printer (Windows)"
+msgstr "SMB dijeljeni štampač (Windows)"
 
-#: kpgeneralpage.cpp:132
-msgid ""
-" <qt>  "
-"<p><b>Page size:</b> Select paper size to be printed on from  the drop-down "
-"menu. </p> "
-"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
-"installed.</p>  "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o PageSize=...         # examples: \"A4\" or \"Letter\"  </pre> </p>  "
-"</qt>"
-msgstr ""
+#: lpd/kmlpduimanager.cpp:47
+msgid "Network printer (TCP)"
+msgstr "Mrežni štampač (TCP)"
 
-#: kpgeneralpage.cpp:145
-msgid ""
-" <qt>  "
-"<p><b>Paper type:</b> Select paper type to be printed on from  the drop-down "
-"menu. </p> "
-"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
-"installed. </p> "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o MediaType=...        # example: \"Transparency\"  </pre> </p>  </qt>"
-msgstr ""
+#: lpd/kmlpduimanager.cpp:48
+msgid "File printer (print to file)"
+msgstr "Datotečni štampač (štampa u datoteku)"
 
-#: kpgeneralpage.cpp:158
-msgid ""
-" <qt>  "
-"<p><b>Paper source:</b> Select paper source tray for the paper to be printed on "
-"from the drop-down menu.  "
-"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
-"installed. </p> "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
-"</pre> </p>  </qt>"
-msgstr ""
+#: lpd/lpdtools.cpp:31
+msgid "A4"
+msgstr "A4"
 
-#: kpgeneralpage.cpp:171
-msgid ""
-" <qt>  "
-"<p><b>Image Orientation:</b> Orientation of the printed  page image on your "
-"paper is controlled by the radio buttons. By default,  the orientation is <em>"
-"Portrait</em>  "
-"<p>You can select 4 alternatives:  "
-"<ul>  "
-"<li> <b>Portrait.</b>.Portrait is the default setting. </li>  "
-"<li> <b>Landscape.</b> </li>  "
-"<li> <b>Reverse Landscape.</b> Reverse Landscape prints the images upside down. "
-"</li>  "
-"<li> <b>Reverse Portrait.</b> Reverse Portrait prints the image upside "
-"down.</li>  </ul>  The icon changes according to your selection.</p> "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o orientation-requested=...       # examples: \"landscape\" or "
-"\"reverse-portrait\"  </pre> </p>  </qt>"
-msgstr ""
+#: lpd/lpdtools.cpp:32
+msgid "A3"
+msgstr "A3"
 
-#: kpgeneralpage.cpp:192
-msgid ""
-" <qt>  "
-"<p><b>Duplex Printing:</b> These controls may be grayed out if your printer  "
-"does not support <em>duplex printing</em> (i.e. printing on both sides of the "
-"sheet).  These controls are active if your printer supports duplex printing.  "
-"<p>  You can choose from 3 alternatives: </p> "
-"<ul>  "
-"<li> <b>None.</b> This prints each page of the job on one side of the sheets "
-"only. </li>  "
-"<li> <b>Long Side.</b> This prints the job on both sides of the paper sheets.  "
-"It prints the job in a way so that the backside has the same orientation as the "
-"front  side if you turn the paper over the long edge. (Some printer drivers "
-"name this mode  <em>duplex-non-tumbled</em>).  </li>  "
-"<li> <b>Short Side.</b> This prints the job on both sides of the paper sheets.  "
-"It prints the job so that the backside has the reverse orientation from the "
-"front  side if you turn the paper over the long edge, but the same orientation, "
-"if you turn it over  the short edge. (Some printer drivers name this mode  <em>"
-"duplex-tumbled</em>).  </li>  </ul>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
-" </pre> </p>  </qt>"
-msgstr ""
+#: lpd/lpdtools.cpp:33
+msgid "B4"
+msgstr "B4"
 
-#: kpgeneralpage.cpp:218
-msgid ""
-" <qt>  "
-"<p><b>Banner Page(s):</b> Select banner(s) to print one or two special sheets  "
-"of paper just before or after your main job. </p> "
-"<p>Banners may contain some pieces of job information, such as user name, time "
-"of printing, job title and more. </p> "
-"<p>Banner pages are useful to separate different jobs more easily, especially "
-"in a multi-user  environment. </p> "
-"<p><em><b>Hint:</em></b> You can design your own banner pages. To make use of "
-"them, just put the banner  file into the standard CUPS <em>banners</em> "
-"directory (This is usually <em>\"/usr/share/cups/banner/\"</em>  "
-"Your custom banner(s) must have one of the supported printable formats.  "
-"Supported formats are ASCII text, PostScript, PDF and nearly any image format "
-"such as PNG, JPEG or  GIF. Your added banner pages will appear in the drop down "
-"menu after a restart of CUPS. </p> "
-"<p>CUPS comes with a selection of banner pages. </p> "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
-"</pre> </p>  </qt>"
-msgstr ""
+#: lpd/lpdtools.cpp:34
+msgid "B5"
+msgstr "B5"
 
-#: kpgeneralpage.cpp:240
-msgid ""
-" <qt>  "
-"<p><b>Pages per Sheet:</b>  You can choose to print more than one page onto "
-"each sheet of paper.  This is sometimes useful to save paper. </p> "
-"<p><b>Note 1:</b> the page images get scaled down accordingly to print 2 or 4 "
-"pages per sheet.  The page image does not get scaled if you print 1 page per "
-"sheet (the default setting.).  "
-"<p><b>Note 2:</b> If you select multiple pages per sheet here, the scaling and "
-"re-arranging is done  by your printing system. Be aware, that some printers can "
-"by themselves print multiple pages per sheet.  In this case you find the option "
-"in the printer driver settings. Be careful: if you enable multiple  pages per "
-"sheet in both places, your printout will not look as you intended. </p> "
-"<br>  "
-"<hr>  "
-"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
-"matches  with the CUPS commandline job option parameter:</em>  "
-"<pre>    -o number-up=...        # examples: \"2\" or \"4\"  </pre> </p>  </qt>"
-msgstr ""
+#: lpd/lpdtools.cpp:233
+msgid "GhostScript settings"
+msgstr "GhostScript postavke"
 
-#: kpgeneralpage.cpp:264 kpqtpage.cpp:118
-msgid "Page s&ize:"
-msgstr "&Veličina papira:"
+#: lpd/lpdtools.cpp:254
+msgid "Resolution"
+msgstr "Rezolucija"
 
-#: kpgeneralpage.cpp:268
-msgid "Paper t&ype:"
-msgstr "&Tip papira:"
+#: lpd/lpdtools.cpp:277
+msgid "Color depth"
+msgstr "Dubina boja"
 
-#: kpgeneralpage.cpp:272
-msgid "Paper so&urce:"
-msgstr "&Izvor papira:"
+#: lpd/lpdtools.cpp:301
+msgid "Additional GS options"
+msgstr "Dodatne GS opcije"
 
-#: kpgeneralpage.cpp:292
-msgid "Duplex Printing"
-msgstr "Duplex štampanje"
+#: lpd/lpdtools.cpp:313
+msgid "Page size"
+msgstr "Veličina stranice"
 
-#: kpgeneralpage.cpp:295 kpqtpage.cpp:143
-msgid "Pages per Sheet"
+#: lpd/lpdtools.cpp:329
+msgid "Pages per sheet"
 msgstr "Stranica po listu"
 
-#: kpgeneralpage.cpp:301 kpqtpage.cpp:125
-msgid "&Portrait"
-msgstr "&Uspravno"
-
-#: kpgeneralpage.cpp:302 kpqtpage.cpp:128
-msgid "&Landscape"
-msgstr "&Položeno"
-
-#: kpgeneralpage.cpp:303
-msgid "&Reverse landscape"
-msgstr "O&brnuto položeno"
-
-#: kpgeneralpage.cpp:304
-msgid "R&everse portrait"
-msgstr "Ob&rnuto uspravno"
-
-#: kpgeneralpage.cpp:309
-msgid ""
-"_: duplex orientation\n"
-"&None"
-msgstr "&Nema"
-
-#: kpgeneralpage.cpp:310
-msgid ""
-"_: duplex orientation\n"
-"Lon&g side"
-msgstr "&Dužom stranom"
-
-#: kpgeneralpage.cpp:311
-msgid ""
-"_: duplex orientation\n"
-"S&hort side"
-msgstr "&Kraćom stranom"
-
-#: kpgeneralpage.cpp:323
-msgid "S&tart:"
-msgstr "&Početak:"
-
-#: kpgeneralpage.cpp:324
-msgid "En&d:"
-msgstr "&Kraj:"
-
-#: kpfileselectpage.cpp:33
-msgid "&Files"
-msgstr "&Datoteke"
-
-#: kpqtpage.cpp:70
-msgid ""
-" <qt>  <b>Selection of color mode:</b> You can choose between 2 options:  "
-"<ul>"
-"<li><b>Color</b> and</li>  "
-"<li><b>Grayscale</b></li></ul>  <b>Note:</b> This selection field may be grayed "
-"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
-"information about your print file. In this case the embedded color- or "
-"grayscale information  of your printfile, and the default handling of the "
-"printer take precedence.  </qt>"
-msgstr ""
-
-#: kpqtpage.cpp:79
-msgid ""
-" <qt>  <b>Selection of page size:</b> Select paper size to be printed on from  "
-"the drop-down menu.  "
-"<p>The exact list of choices depends on the printer driver (\"PPD\") you have "
-"installed.  </qt>"
-msgstr ""
-
-#: kpqtpage.cpp:84
-msgid ""
-" <qt>  <b>Selection of pages per sheet:</b>  You can choose to print more than "
-"one page onto each sheet of paper.  This is sometimes useful to save paper.  "
-"<p><b>Note 1:</b> the page images get scaled down accordingly to print 2 or 4 "
-"pages per sheet.  The page image does not get scaled if you print 1 page per "
-"sheet (the default setting.).  "
-"<p><b>Note 2:</b> If you select multiple pages per sheet here, the scaling and "
-"re-arranging is done  by your printing system.  "
-"<p><b>Note 3, regarding \"Other\":</b> You cannot really select <em>Other</em> "
-"as the number of  pages to print on one sheet.\"Other\" is checkmarked here for "
-"information purposes only.  "
-"<p>To select 8, 9, 16 or other numbers of  pages per sheet:  "
-"<ul>  "
-"<li> go to the tab headlined \"Filter\"</li> "
-"<li> enable the <em>Multiple Pages per Sheet</em> filter </li> "
-"<li> and configure it (bottom-most button on the right of the \"Filters\" tab). "
-"</li> </ul> </qt>"
-msgstr ""
-
-#: kpqtpage.cpp:102
-msgid ""
-" <qt>  <b>Selection of image orientation:</b> Orientation of the printed  "
-"pageimage on your paper is controlled by the radio buttons. By default,  the "
-"orientation is <em>Portrait</em>  "
-"<p>You can select 2 alternatives:  "
-"<ul>  "
-"<li> <b>Portrait.</b>.Portrait is the default setting. </li>  "
-"<li> <b>Landscape.</b> </li>  </ul>  The icon changes according to your "
-"selection. </qt>"
-msgstr ""
-
-#: kpqtpage.cpp:113
-msgid "Print Format"
-msgstr "Format štampe"
-
-#: kpqtpage.cpp:123
-msgid "Color Mode"
-msgstr "Mod boje"
+#: lpd/lpdtools.cpp:345
+msgid "Left/right margin (1/72 in)"
+msgstr "Lijeva/desna margina (1/72 in)"
 
-#: kpqtpage.cpp:135
-msgid "Colo&r"
-msgstr "&U boji"
+#: lpd/lpdtools.cpp:350
+msgid "Top/bottom margin (1/72 in)"
+msgstr "Gornja/donja margina (1/72 in)"
 
-#: kpqtpage.cpp:138
-msgid "&Grayscale"
-msgstr "&Nijanse sive"
+#: lpd/lpdtools.cpp:356
+msgid "Text options"
+msgstr "Tekst opcije"
 
-#: kpqtpage.cpp:151
-msgid "Ot&her"
-msgstr "O&stalo"
+#: lpd/lpdtools.cpp:362
+msgid "Send EOF after job to eject page"
+msgstr "Pošalji EOF nakon zadatka za izbacivanje lista"
 
-#: lpdunix/kmlpdunixmanager.cpp:210
-msgid "Description unavailable"
-msgstr "Opis nije dostupan"
+#: lpd/lpdtools.cpp:370
+msgid "Fix stair-stepping text"
+msgstr "Popravi stepenasti tekst"
 
-#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271
-#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380
-#, c-format
-msgid "Remote printer queue on %1"
-msgstr "Udaljeni red štampe na %1"
+#: lpd/lpdtools.cpp:382
+msgid "Fast text printing (non-PS printers only)"
+msgstr "Brzo štampanje teksta (samo za ne-PS štampače)"
 
 #: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138
 msgid "Printer Configuration"
@@ -5159,131 +5157,17 @@ msgstr "Postavke štampača"
 msgid "No configurable options for that printer."
 msgstr "Nema izmjenjivih postavki za ovaj štampač."
 
-#: kmvirtualmanager.cpp:161
-msgid ""
-"<qt>You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to TDE and will not be available outside TDE applications. "
-"Note that this will only make your personal default printer as undefined for "
-"non-TDE applications and should not prevent you from printing normally. Do you "
-"really want to set <b>%1</b> as your personal default?</qt>"
-msgstr ""
-"<qt>Upravo ćete podesiti pseudo-štampač kao vaš lični podrazumijevani štampač. "
-"Ova postavka je specifična za TDE i neće važiti izvan TDE programa. Zapamtite "
-"da će za ne-TDE programe ovo učiniti da ne bude definisan podrazumijevani "
-"štampač, što znači da morate izabrati štampač prilikom svakog pokušaja "
-"štampanja. Da li zaista želite podesiti <b>%1</b> kao vaš lični podrazumijevani "
-"štampač?</qt>"
-
-#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85
-msgid "Empty host name."
-msgstr "Prazno ime računara."
-
-#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87
-msgid "Empty queue name."
-msgstr "Prazno ime reda."
-
-#: rlpr/kmrlprmanager.cpp:63
-msgid "Printer not found."
-msgstr "Štampač nije pronađen."
-
-#: rlpr/kmrlprmanager.cpp:75
-msgid "Not implemented yet."
-msgstr "Još nije napravljeno."
-
-#: rlpr/kmconfigproxy.cpp:29
-msgid "Proxy"
-msgstr "Proxy"
-
-#: rlpr/kmconfigproxy.cpp:30
-msgid "RLPR Proxy Server Settings"
-msgstr "Postavke RLPR proxy servera"
-
-#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50
-msgid "Remote LPD Queue Settings"
-msgstr "Postavke udaljenog LPD reda"
-
-#: rlpr/kmproxywidget.cpp:32
-msgid "Proxy Settings"
-msgstr "Proxy postavke"
-
-#: rlpr/kmproxywidget.cpp:36
-msgid "&Use proxy server"
-msgstr "&Koristi proxy server"
-
-#: rlpr/kmwrlpr.cpp:124
-msgid "Remote queue %1 on %2"
-msgstr "Udaljeni red %1 na %2"
-
-#: rlpr/kmwrlpr.cpp:199
-msgid "No Predefined Printers"
-msgstr "Nema predefinisanih štampača"
-
-#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53
-msgid ""
-"The <b>%1</b> executable could not be found in your path. Check your "
-"installation."
-msgstr ""
-"Izvršna datoteka <b>%1</b> nije pronađena u vašem putu. Provjerite vašu "
-"instalaciju."
-
-#: rlpr/krlprprinterimpl.cpp:73
-msgid "The printer is incompletely defined. Try to reinstall it."
-msgstr "Štampač je nepotpuno definisan. Probajte ga reinstalirati."
-
-#: kmspecialmanager.cpp:53
-#, fuzzy
-msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
-"order to manage global pseudo printers."
-msgstr ""
-"U vašem lokalnom TDE direktoriju pronađena je datoteka "
-"share/tdeprint/specials.desktop. Ova datoteka je vjerovatno ostala od nekog od "
-"ranijih izdanja TDEa i treba je ukloniti kako bi se moglo upravljati globalnim "
-"pseudo štampačima."
-
-#: kmjob.cpp:114
-msgid "Queued"
-msgstr "Stavljeno u red"
-
-#: kmjob.cpp:117
-msgid "Held"
-msgstr "Zadržano"
-
-#: kmjob.cpp:123
-msgid "Canceled"
-msgstr "Poništeno"
-
-#: kmjob.cpp:126
-msgid "Aborted"
-msgstr "Prekinuto"
-
-#: kmjob.cpp:129
-msgid "Completed"
-msgstr "Završeno"
-
-#. i18n: file kprintpreviewui.rc line 13
-#: rc.cpp:9 rc.cpp:21
-#, no-c-format
-msgid "&PageMarks"
-msgstr "&PageMarks"
-
-#: kmuimanager.cpp:158
-#, c-format
-msgid "Configuration of %1"
-msgstr "Konfiguracija %1"
-
-#: ext/kextprinterimpl.cpp:47
-msgid "Empty print command."
-msgstr "Prazna naredba za štampu."
+#: droptionview.cpp:61
+msgid "Value:"
+msgstr "Vrijednost:"
 
-#: ext/kmextmanager.cpp:41
-msgid "PS_printer"
-msgstr "PS_printer"
+#: droptionview.cpp:167
+msgid "String value:"
+msgstr "Tekstualna vrijednost:"
 
-#: ext/kmextmanager.cpp:43
-msgid "PostScript file generator"
-msgstr "Generator PostScript datoteka"
+#: droptionview.cpp:306 droptionview.cpp:341
+msgid "No Option Selected"
+msgstr "Nijedna opcija nije izabrana"
 
 #: kpposterpage.cpp:42
 msgid " <qt>  5.  </qt>"
@@ -5444,106 +5328,434 @@ msgstr "Veži veličinu postera i veličinu štampe"
 msgid "Unknown"
 msgstr "Nepoznat"
 
-#: kprinter.cpp:690 tdeprintd.cpp:158
-#, c-format
+#: kmjob.cpp:114
+msgid "Queued"
+msgstr "Stavljeno u red"
+
+#: kmjob.cpp:117
+msgid "Held"
+msgstr "Zadržano"
+
+#: kmjob.cpp:123
+msgid "Canceled"
+msgstr "Poništeno"
+
+#: kmjob.cpp:126
+msgid "Aborted"
+msgstr "Prekinuto"
+
+#: kmjob.cpp:129
+msgid "Completed"
+msgstr "Završeno"
+
+#: foomatic/kmfoomaticmanager.cpp:70
+msgid "This is not a Foomatic printer"
+msgstr "Ovo nije Foomatic štampač"
+
+#: foomatic/kmfoomaticmanager.cpp:75
+msgid "Some printer information are missing"
+msgstr "Neke informacije o štampaču nedostaju"
+
+#: marginwidget.cpp:37
 msgid ""
-"<p><nobr>A print error occurred. Error message received from system:</nobr></p>"
-"<br>%1"
+" <qt>  "
+"<p><b>Top Margin</b></p>.  "
+"<p>This spinbox/text edit field lets you control the top margin of your "
+"printout if the printing  application does not define its margins internally. "
+"</p>  "
+"<p>The setting works for instance for ASCII text file printing, or for printing "
+"from KMail and  and Konqueror.. </p> "
+"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
+"OpenOffice.org printing,  because these applications (or rather their users) "
+"are expected to do it by themselves.  It also does not work for PostScript or "
+"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o page-top=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.  </pre> </p>  </qt>"
 msgstr ""
-"<p><nobr>Došlo je do greške pri štampanju. Poruka od sistema:</nobr></p>"
-"<br>%1"
 
-#: tdeprintd.cpp:176
+#: marginwidget.cpp:57
 msgid ""
-"Some of the files to print are not readable by the TDE print daemon. This may "
-"happen if you are trying to print as a different user to the one currently "
-"logged in. To continue printing, you need to provide root's password."
+" <qt>  "
+"<p><b>Bottom Margin</b></p>.  "
+"<p>This spinbox/text edit field lets you control the bottom margin of your "
+"printout if the printing  application does not define its margins internally. "
+"</p>  "
+"<p>The setting works for instance for ASCII text file printing, or for printing "
+"from KMail and  and Konqueror. </p> "
+"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
+"OpenOffice.org printing,  because these applications (or rather their users) "
+"are expected to do it by themselves.  It also does not work for PostScript or "
+"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.  </pre> </qt>"
 msgstr ""
-"Neke od datoteka za štampu nisu čitljive za TDE print demon. Ovo se može desiti "
-"ako pokušavate štampati kao korisnik različit od onoga koji je prijavljen. Za "
-"nastavak štampanja, morate navesti root šifru."
 
-#: tdeprintd.cpp:181
-msgid "Provide root's Password"
-msgstr "Navedite root šifru"
+#: marginwidget.cpp:76
+msgid ""
+" <qt>  "
+"<p><b>Left Margin</b></p>.  "
+"<p>This spinbox/text edit field lets you control the left margin of your "
+"printout if the printing  application does not define its margins internally. "
+"</p>  "
+"<p>The setting works for instance for ASCII text file printing, or for printing "
+"from KMail and  and Konqueror. </p> "
+"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
+"OpenOffice.org printing,  because these applications (or rather their users) "
+"are expected to do it by themselves.  It also does not work for PostScript or "
+"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o page-left=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.  </pre> </qt>"
+msgstr ""
 
-#: tdeprintd.cpp:200 tdeprintd.cpp:202
+#: marginwidget.cpp:95
+msgid ""
+" <qt>  "
+"<p><b>Right Margin</b></p>.  "
+"<p>This spinbox/text edit field lets you control the right margin of your "
+"printout if the printing  application does not define its margins internally. "
+"</p>  "
+"<p>The setting works for instance for ASCII text file printing, or for printing "
+"from KMail and  and Konqueror. </p> "
+"<p><b>Note:</b></p>This margin setting is not intended for KOffice or "
+"OpenOffice.org printing,  because these applications (or rather their users) "
+"are expected to do it by themselves.  It also does not work for PostScript or "
+"PDF file, which in most cases have their margins hardcoded  internally.</p>  "
+"<br>  "
+"<hr>  "
+"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
+"matches  with the CUPS commandline job option parameter:</em>  "
+"<pre>    -o page-right=...      # use values from \"0\" or higher. \"72\" is "
+"equal to 1 inch.  </pre> </qt>"
+msgstr ""
+
+#: marginwidget.cpp:114
+msgid ""
+" <qt>  "
+"<p><b>Change Measurement Unit<b></p>.  "
+"<p>You can change the units of measurement for the page margins here. Select "
+"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).  </p>  </qt>"
+msgstr ""
+
+#: marginwidget.cpp:121
+msgid ""
+" <qt>  "
+"<p><b>Custom Margins Checkbox</b></p>.  "
+"<p>Enable this checkbox if you want to modify the margins of your printouts  "
+"<p>You can change margin settings in 4 ways:  "
+"<ul>  "
+"<li>Edit the text fields. </li>  "
+"<li>Click spinbox arrows. </li>  "
+"<li>Scroll wheel of wheelmouses. </li>  "
+"<li>Drag margins in preview frame with mouse. </li>  </ul>  <b>Note:</b> "
+"The margin setting does not work if you load such files directly into  "
+"kprinter, which have their print margins hardcoded internally, like as most  "
+"PDF or PostScript files. It works for all ASCII text files however. It also may "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
+"framework, such as OpenOffice.org. </p>  </qt>"
+msgstr ""
+
+#: marginwidget.cpp:138
+msgid ""
+" <qt>  "
+"<p><b>\"Drag-your-Margins\" </p>.  "
+"<p>Use your mouse to drag and set each margin on this little preview window. "
+"</p>  </qt>"
+msgstr ""
+
+#: marginwidget.cpp:148
+msgid "&Use custom margins"
+msgstr "&Koristi vlastite margine"
+
+#: marginwidget.cpp:158
+msgid "&Top:"
+msgstr "&Vrh:"
+
+#: marginwidget.cpp:159
+msgid "&Bottom:"
+msgstr "D&no:"
+
+#: marginwidget.cpp:160
+msgid "Le&ft:"
+msgstr "Lije&vo:"
+
+#: marginwidget.cpp:161
+msgid "&Right:"
+msgstr "&Desno:"
+
+#: marginwidget.cpp:164
+msgid "Pixels (1/72nd in)"
+msgstr "Piksela (1/72ina inča)"
+
+#: marginwidget.cpp:167
+msgid "Inches (in)"
+msgstr "Inča (in)"
+
+#: marginwidget.cpp:168
+msgid "Centimeters (cm)"
+msgstr "Centimetara (cm)"
+
+#: marginwidget.cpp:169
+msgid "Millimeters (mm)"
+msgstr "Milimetara (mm)"
+
+#: kmvirtualmanager.cpp:161
+msgid ""
+"<qt>You are about to set a pseudo-printer as your personal default. This "
+"setting is specific to TDE and will not be available outside TDE applications. "
+"Note that this will only make your personal default printer as undefined for "
+"non-TDE applications and should not prevent you from printing normally. Do you "
+"really want to set <b>%1</b> as your personal default?</qt>"
+msgstr ""
+"<qt>Upravo ćete podesiti pseudo-štampač kao vaš lični podrazumijevani štampač. "
+"Ova postavka je specifična za TDE i neće važiti izvan TDE programa. Zapamtite "
+"da će za ne-TDE programe ovo učiniti da ne bude definisan podrazumijevani "
+"štampač, što znači da morate izabrati štampač prilikom svakog pokušaja "
+"štampanja. Da li zaista želite podesiti <b>%1</b> kao vaš lični podrazumijevani "
+"štampač?</qt>"
+
+#: lpr/editentrydialog.cpp:40
+msgid "Aliases:"
+msgstr "Aliasi:"
+
+#: lpr/editentrydialog.cpp:47
+msgid "Number"
+msgstr "Broj"
+
+#: lpr/editentrydialog.cpp:72
 #, c-format
-msgid "Printing Status - %1"
-msgstr "Status štampe - %1"
+msgid "Printcap Entry: %1"
+msgstr "Printcap unos: %1"
 
-#: tdeprintd.cpp:263
-msgid "Printing system"
-msgstr "Sistem štampe"
+#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291
+#: lpr/lpchelper.cpp:314
+msgid "The executable %1 couldn't be found in your PATH."
+msgstr "Izvršna datoteka %1 nije pronađena u vašem PATHu."
 
-#: tdeprintd.cpp:266
-msgid "Authentication failed (user name=%1)"
-msgstr "Prijava nije uspjela (korisničko ime=%1)"
+#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298
+msgid "Permission denied."
+msgstr "Pristup odbijen."
 
-#: kprinter.cpp:280
-msgid "Initialization..."
-msgstr "Inicijalizacija..."
+#: lpr/lpchelper.cpp:259
+msgid "Printer %1 does not exist."
+msgstr "Štampač %1 ne postoji."
 
-#: kprinter.cpp:283 kprinter.cpp:909
+#: lpr/lpchelper.cpp:263
 #, c-format
-msgid "Generating print data: page %1"
-msgstr "Generišem podatke za štampu: stranica %1"
+msgid "Unknown error: %1"
+msgstr "Nepoznata greška: %1"
 
-#: kprinter.cpp:429
-msgid "Previewing..."
-msgstr "Pregled..."
+#: lpr/lpchelper.cpp:282
+#, c-format
+msgid "Execution of lprm failed: %1"
+msgstr "Izvršenje lprm-a nije uspjelo: %1"
 
-#: driverview.cpp:47
+#: lpr/matichandler.cpp:82
+msgid "Network printer"
+msgstr "Mrežni štampač"
+
+#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86
+#, c-format
+msgid "Local printer on %1"
+msgstr "Lokalni štampač na %1"
+
+#: lpr/matichandler.cpp:245
+msgid "Internal error."
+msgstr "Interna greška."
+
+#: lpr/matichandler.cpp:339
 msgid ""
-" <qt>  <b>List of Driver Options (from PPD)</b>.  "
-"<p>The upper pane of this dialog page contains all printjob options as laid  "
-"down in the printer's description file (PostScript Printer Description == "
-"'PPD') </p> "
-"<p>Click on any item in the list and watch the lower pane of this dialog page  "
-"display the available values. </p>  "
-"<p>Set the values as needed. Then use one of the pushbuttons below to "
-"proceed:</p>  "
-"<ul>  "
-"<li><em>'Save'</em> your settings if you want to re-use  them in your next "
-"job(s) too. <em>'Save'</em> will store your settings permanently until  you "
-"change them again. </li>. "
-"<li>Click <em>'OK'</em> (without a prior click on <em>'Save'</em>"
-", if you want to use  your selected settings just once, for the next print job. "
-"<em>'OK'</em>  will forget your current settings when kprinter is closed again, "
-"and will start next time  with the previously saved defaults. </li> "
-"<li><em>'Cancel'</em> will not change anything. If you proceed to print after "
-"clicking  <em>'Cancel'</em>, the job will print with the default settings of "
-"this queue.  </ul> "
-"<p><b>Note.</b> The number of available job options depends strongly on the "
-"actual  driver used for your print queue. <em>'Raw'</em> "
-"queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by TDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
+"You probably don't have the required permissions to perform that operation."
+msgstr "Vjerovatno nemate potrebne privilegije da obavite tu operaciju."
+
+#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276
+#: lpr/matichandler.cpp:421
+#, c-format
+msgid "Unsupported backend: %1."
+msgstr "Nepodržan backend: %1."
+
+#: lpr/matichandler.cpp:426
+msgid ""
+"Unable to find executable lpdomatic. Check that Foomatic is correctly installed "
+"and that lpdomatic is installed in a standard location."
 msgstr ""
+"Ne mogu da pronađem izvršni lpdomatic. Provjerite da li je Foomatic ispravno "
+"instaliran i da li je lpdomatic instaliran na uobičajenoj lokaciji."
 
-#: driverview.cpp:71
+#: lpr/matichandler.cpp:457
+#, c-format
+msgid "Unable to remove driver file %1."
+msgstr "Ne mogu izbrisati drajver datoteku %1."
+
+#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72
+msgid "Network printer (%1)"
+msgstr "Mrežni štampač (%1)"
+
+#: lpr/lprngtoolhandler.cpp:99
+msgid "IFHP Driver (%1)"
+msgstr "IFHPdrajver (%1)"
+
+#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170
+msgid "unknown"
+msgstr "nepoznato"
+
+#: lpr/lprngtoolhandler.cpp:162
+msgid "No driver defined for that printer. It might be a raw printer."
+msgstr ""
+"Za ovaj štampač nije definisan drajver. Možda je u pitanju sirovi štampač."
+
+#: lpr/lprngtoolhandler.cpp:170
+msgid "LPRngTool Common Driver (%1)"
+msgstr "Uobičajeni LPRngTool drajver (%1)"
+
+#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323
+#, c-format
+msgid "Invalid printer backend specification: %1"
+msgstr "Neispravna specifikacija backenda štampača: %1"
+
+#: lpr/kmlprmanager.cpp:289
+msgid "The printcap file is a remote file (NIS). It cannot be written."
+msgstr "printcap datoteka je udaljena datoteka (NIS). Ne može se pisati u nju."
+
+#: lpr/kmlprmanager.cpp:305
 msgid ""
-" <qt>  <b>List of Possible Values for given Option (from PPD)</b>.  "
-"<p>The lower pane of this dialog page contains all possible values of the "
-"printoption  highlighted above, as laid  down in the printer's description file "
-"(PostScript Printer Description == 'PPD') </p> "
-"<p>Select the value you want and proceed. </p>  "
-"<p>Then use one of the pushbuttons below to leave this dialog:</p>  "
-"<ul>  "
-"<li><em>'Save'</em> your settings if you want to re-use  them in your next "
-"job(s) too. <em>'Save'</em> will store your settings permanently until  you "
-"change them again. </li>. "
-"<li>Click <em>'OK'</em> if you want to use your selected settings just once, "
-"for the  next print job. <em>'OK'</em>  will forget your current settings when "
-"kprinter is closed again, and will start next time  with your previous "
-"defaults. </li> "
-"<li><em>'Cancel'</em> will not change anything. If you proceed to print after "
-"clicking  <em>'Cancel'</em>, the job will print with the default settings of "
-"this queue.  </ul> "
-"<p><b>Note.</b> The number of available job options depends strongly on the "
-"actual  driver used for your print queue. <em>'Raw'</em> "
-"queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by TDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
+"Unable to save printcap file. Check that you have write permissions for that "
+"file."
+msgstr ""
+"Ne mogu spasiti printcap datoteku. Provjerite da li imate privilegije za "
+"pisanje u tu datoteku."
+
+#: lpr/kmlprmanager.cpp:330
+msgid "Internal error: no handler defined."
+msgstr "Interna greška: nije definisan handler."
+
+#: lpr/kmlprmanager.cpp:344
+msgid "Couldn't determine spool directory. See options dialog."
+msgstr "Ne mogu odrediti spool direktorij. Pogledajte dijalog sa opcijama."
+
+#: lpr/kmlprmanager.cpp:350
+msgid ""
+"Unable to create the spool directory %1. Check that you have the required "
+"permissions for that operation."
+msgstr ""
+"Ne mogu napraviti spool direktorij %1. Provjerite da li imate potrebne "
+"privilegije za tu operaciju."
+
+#: lpr/kmlprmanager.cpp:382
+#, c-format
+msgid ""
+"The printer has been created but the print daemon could not be restarted. %1"
+msgstr ""
+"Štampač je napravljen, ali demon za štampu nije mogao biti restartovan. %1"
+
+#: lpr/kmlprmanager.cpp:410
+msgid ""
+"Unable to remove spool directory %1. Check that you have write permissions for "
+"that directory."
+msgstr ""
+"Ne mogu brisati spool direktorij %1. Provjerite da li imate privilegije za "
+"pisanje u taj direktorij."
+
+#: lpr/kmlprmanager.cpp:458
+msgid "&Edit printcap Entry..."
+msgstr "&Izmijeni printcap unos..."
+
+#: lpr/kmlprmanager.cpp:473
+msgid ""
+"Editing a printcap entry manually should only be done by confirmed system "
+"administrator. This may prevent your printer from working. Do you want to "
+"continue?"
 msgstr ""
+"Izmjenu printcap unosa ručno treba raditi samo potvrđen sistemski "
+"administrator. Ona može učiniti da štampač više ne radi. Želite li nastaviti?"
+
+#: lpr/kmlprmanager.cpp:489
+#, c-format
+msgid "Spooler type: %1"
+msgstr "Tip spoolera: %1"
+
+#: lpr/apshandler.cpp:68
+msgid "APS Driver (%1)"
+msgstr "APS drajver (%1)"
+
+#: lpr/apshandler.cpp:221
+#, c-format
+msgid "Unable to create directory %1."
+msgstr "Ne mogu da napravim direktorij %1."
+
+#: lpr/apshandler.cpp:241
+#, c-format
+msgid "Missing element: %1."
+msgstr "Nedostajući element: %1."
+
+#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367
+#, c-format
+msgid "Unable to create the file %1."
+msgstr "Ne mogu da napravim datoteku %1."
+
+#: lpr/apshandler.cpp:322
+msgid "The APS driver is not defined."
+msgstr "APS drajver nije definisan."
+
+#: lpr/apshandler.cpp:380
+#, c-format
+msgid "Unable to remove directory %1."
+msgstr "Ne mogu da pobrišem direktorij %1."
+
+#: lpr/kmlprjobmanager.cpp:83
+msgid "Unsupported operation."
+msgstr "Operacija nije podržana."
+
+#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97
+msgid "Unknown (unrecognized entry)"
+msgstr "Nepoznato (stavka nije prepoznata)"
+
+#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91
+msgid "Remote queue (%1) on %2"
+msgstr "Udaljeni red %1 na %2"
+
+#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116
+msgid "Unrecognized entry."
+msgstr "Nepoznata stavka."
+
+#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37
+msgid "Spooler"
+msgstr "Spooler"
+
+#: lpr/kmconfiglpr.cpp:34
+msgid "Spooler Settings"
+msgstr "Postavke spoolera"
+
+#: ext/kmextmanager.cpp:41
+msgid "PS_printer"
+msgstr "PS_printer"
+
+#: ext/kmextmanager.cpp:43
+msgid "PostScript file generator"
+msgstr "Generator PostScript datoteka"
+
+#: ext/kextprinterimpl.cpp:47
+msgid "Empty print command."
+msgstr "Prazna naredba za štampu."
+
+#: driver.cpp:385 foomatic2loader.cpp:268
+msgid "Adjustments"
+msgstr "Prilagodbe"
+
+#: driver.cpp:387
+msgid "JCL"
+msgstr "JCL"
 
 #: kpcopiespage.cpp:46
 msgid ""
@@ -5777,38 +5989,6 @@ msgstr "Sku&p stranica:"
 msgid "Pages"
 msgstr "Stranica"
 
-#: plugincombobox.cpp:33
-msgid ""
-" <qt><b>Print Subsystem Selection</b> "
-"<p>This combo box shows (and lets you select) a print subsystem to be used by "
-"TDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
-"itself upon first startup. Most Linux distributions have \"CUPS\", the <em>"
-"Common UNIX Printing System</em>. </qt>"
-msgstr ""
-"<qt>Ovo kombinirano polje prikazuje (i omogućava vam da odaberete) podsistem za "
-"štampu koji će koristiti TDEPrint. (Ovaj podsistem za štampu mora, naravno, da "
-"bude instaliran unutar vašeg operativnog sistema). TDEPrint obično uspijeva sam "
-"da ga otkrije. Većina distribucija linux-a sadrži \"CUPS\", <em>"
-"Common Unix Printing System</em>.</qt>"
-
-#: plugincombobox.cpp:45
-msgid "Print s&ystem currently used:"
-msgstr "Sist&em štampe koji se trenutno koristi:"
-
-#: plugincombobox.cpp:91
-msgid ""
-" <qt><b>Current Connection</b> "
-"<p>This line shows which CUPS server your PC is currently connected to for "
-"printing and retrieving printer info. To switch to a different CUPS server, "
-"click \"System Options\", then select \"Cups server\" and fill in the required "
-"info. </qt>"
-msgstr ""
-"<qt>Ova linija prikazuje na koji CUPS server je trenutno povezan vaš računar, "
-"za štampanje i dobavljanje informacija o štampačima. Da biste se prebacili na "
-"drugi CUPS server, pritisnite dugme \"Sistemske opcije\", zatim odaberite "
-"\"CUPS server\" i popunite potrebne podatke.</qt>"
-
 #: tdefilelist.cpp:42
 msgid ""
 " <qt> <b>Add File button</b> "
@@ -5926,180 +6106,43 @@ msgstr ""
 "Povucite datoteku(e) ovdje ili koristite dugme da biste otvorili datotečni "
 "dijalog. Ostavite praznim za <b>&lt;STDIN&gt;</b>."
 
-#: droptionview.cpp:61
-msgid "Value:"
-msgstr "Vrijednost:"
-
-#: droptionview.cpp:167
-msgid "String value:"
-msgstr "Tekstualna vrijednost:"
-
-#: droptionview.cpp:306 droptionview.cpp:341
-msgid "No Option Selected"
-msgstr "Nijedna opcija nije izabrana"
-
-#: lpd/kmlpduimanager.cpp:44
-msgid "Local printer (parallel, serial, USB)"
-msgstr "Lokalni štampač (paralelni, serijski, USB)"
-
-#: lpd/kmlpduimanager.cpp:46
-msgid "SMB shared printer (Windows)"
-msgstr "SMB dijeljeni štampač (Windows)"
-
-#: lpd/kmlpduimanager.cpp:47
-msgid "Network printer (TCP)"
-msgstr "Mrežni štampač (TCP)"
-
-#: lpd/kmlpduimanager.cpp:48
-msgid "File printer (print to file)"
-msgstr "Datotečni štampač (štampa u datoteku)"
-
-#: lpd/lpdtools.cpp:31
-msgid "A4"
-msgstr "A4"
-
-#: lpd/lpdtools.cpp:32
-msgid "A3"
-msgstr "A3"
-
-#: lpd/lpdtools.cpp:33
-msgid "B4"
-msgstr "B4"
-
-#: lpd/lpdtools.cpp:34
-msgid "B5"
-msgstr "B5"
-
-#: lpd/lpdtools.cpp:233
-msgid "GhostScript settings"
-msgstr "GhostScript postavke"
-
-#: lpd/lpdtools.cpp:254
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: lpd/lpdtools.cpp:277
-msgid "Color depth"
-msgstr "Dubina boja"
-
-#: lpd/lpdtools.cpp:301
-msgid "Additional GS options"
-msgstr "Dodatne GS opcije"
-
-#: lpd/lpdtools.cpp:313
-msgid "Page size"
-msgstr "Veličina stranice"
-
-#: lpd/lpdtools.cpp:329
-msgid "Pages per sheet"
-msgstr "Stranica po listu"
-
-#: lpd/lpdtools.cpp:345
-msgid "Left/right margin (1/72 in)"
-msgstr "Lijeva/desna margina (1/72 in)"
-
-#: lpd/lpdtools.cpp:350
-msgid "Top/bottom margin (1/72 in)"
-msgstr "Gornja/donja margina (1/72 in)"
-
-#: lpd/lpdtools.cpp:356
-msgid "Text options"
-msgstr "Tekst opcije"
-
-#: lpd/lpdtools.cpp:362
-msgid "Send EOF after job to eject page"
-msgstr "Pošalji EOF nakon zadatka za izbacivanje lista"
-
-#: lpd/lpdtools.cpp:370
-msgid "Fix stair-stepping text"
-msgstr "Popravi stepenasti tekst"
-
-#: lpd/lpdtools.cpp:382
-msgid "Fast text printing (non-PS printers only)"
-msgstr "Brzo štampanje teksta (samo za ne-PS štampače)"
-
-#: lpd/kmlpdmanager.cpp:87
-msgid "Local printer queue (%1)"
-msgstr "Lokalni red štampe (%1)"
-
-#: lpd/kmlpdmanager.cpp:87
-msgid ""
-"_: Unknown type of local printer queue\n"
-"Unknown"
-msgstr "Nepoznat"
-
-#: lpd/kmlpdmanager.cpp:88
-msgid "<Not available>"
-msgstr "<Nije dostupno>"
-
-#: lpd/kmlpdmanager.cpp:89
-msgid ""
-"_: Unknown Driver\n"
-"Unknown"
-msgstr "Nepoznat"
-
-#: lpd/kmlpdmanager.cpp:95
-msgid "Remote LPD queue %1@%2"
-msgstr "Udaljeni LPD red %1@%2"
-
-#: lpd/kmlpdmanager.cpp:158
-msgid "Unable to create spool directory %1 for printer %2."
-msgstr "Ne mogu kreirati spool direktorij %1 za štampač <b>%2</b>."
-
-#: lpd/kmlpdmanager.cpp:165
-msgid "Unable to save information for printer <b>%1</b>."
-msgstr "Ne mogu spasiti informacije za štampač <b>%1</b>."
-
-#: lpd/kmlpdmanager.cpp:193
-msgid ""
-"Unable to set correct permissions on spool directory %1 for printer <b>%2</b>."
-msgstr ""
-"Ne mogu podesiti ispravne privilegije na spool direktoriju %1 za štampač <b>"
-"%2</b>."
-
-#: lpd/kmlpdmanager.cpp:237
-msgid "Permission denied: you must be root."
-msgstr "Pristup odbijen: morate biti root."
-
-#: lpd/kmlpdmanager.cpp:244
-msgid "Unable to execute command \"%1\"."
-msgstr "Ne mogu izvršiti naredbu \"%1\"."
+#: kmmanager.cpp:70
+msgid "This operation is not implemented."
+msgstr "Ova operacija nije napravljena."
 
-#: lpd/kmlpdmanager.cpp:317
-msgid "Unable to write printcap file."
-msgstr "Ne mogu da pišem u printcap datoteku."
+#: kmmanager.cpp:169
+msgid "Unable to locate test page."
+msgstr "Ne mogu pronaći testnu stranicu."
 
-#: lpd/kmlpdmanager.cpp:372
-msgid "Couldn't find driver <b>%1</b> in printtool database."
-msgstr "Nisam uspio pronaći drajver <b>%1</b> u printtool bazi."
+#: kmmanager.cpp:449
+msgid "Can't overwrite regular printer with special printer settings."
+msgstr "Ne mogu prepisati običan štampač sa posebnim postavkama štampača."
 
-#: lpd/kmlpdmanager.cpp:411
-msgid "Couldn't find printer <b>%1</b> in printcap file."
-msgstr "Ne mogu naći štampač <b>%1</b> u printcap datoteci."
+#: kmmanager.cpp:478
+#, c-format
+msgid "Parallel Port #%1"
+msgstr "Paralelni port #%1"
 
-#: lpd/kmlpdmanager.cpp:440
-msgid "No driver found (raw printer)"
-msgstr "Nije pronađen drajver (sirova štampa)"
+#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
+#, c-format
+msgid "Unable to load TDE print management library: %1"
+msgstr "Ne mogu učitati TDEovu biblioteku za upravljanje štampom:<br>%1"
 
-#: lpd/kmlpdmanager.cpp:442
-msgid "Printer type not recognized."
-msgstr "Tip štampača nije prepoznat."
+#: kmmanager.cpp:491 kxmlcommand.cpp:669
+msgid "Unable to find wizard object in management library."
+msgstr "Ne mogu pronaći čarobnjak u biblioteci za upravljanje."
 
-#: lpd/kmlpdmanager.cpp:452
-msgid ""
-"The driver device <b>%1</b> is not compiled in your GhostScript distribution. "
-"Check your installation or use another driver."
-msgstr ""
-"Drajver uređaj <b>%1</b> nije kompajliran u vašu distribuciju GhostScript-a. "
-"Provjerite vašu instalaciju ili koristite neki drugi drajver."
+#: kmmanager.cpp:507
+msgid "Unable to find options dialog in management library."
+msgstr "Ne mogu pronaći dijalog opcija u biblioteci za upravljanje."
 
-#: lpd/kmlpdmanager.cpp:560
-msgid "Unable to write driver associated files in spool directory."
-msgstr "Ne mogu da pišem u datoteke vezane za drajver u spool direktoriju."
+#: kmmanager.cpp:534
+msgid "No plugin information available"
+msgstr "Informacije o dodatku (plugin-u) nisu dostupne"
 
-#: driver.cpp:387
-msgid "JCL"
-msgstr "JCL"
+#: marginpreview.cpp:135
+msgid "No preview available"
+msgstr "Pregled nije dostupan"
 
 #: kxmlcommand.cpp:789
 msgid "One of the command object's requirements is not met."
@@ -6110,147 +6153,104 @@ msgstr "Jedan od zahtjeva naredbenog objekta nije ispunjen."
 msgid "The command does not contain the required tag %1."
 msgstr "Naredba ne sadrži potrebni tag %1."
 
-#: kpfilterpage.cpp:42
-msgid ""
-" <qt> <b>Add Filter button</b> "
-"<p>This button calls a little dialog to let you select a filter here. </p> "
-"<p><b>Note 1:</b> You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (TDEPrint  checks your "
-"filtering chain and will warn you if you fail to do so.</p>  "
-"<p><b>Note 2:</b> The filters you define here are applied to your jobfile  <em>"
-"<b>before</b></em> it is handed downstream to your spooler and print  subsystem "
-"(e.g. CUPS, LPRng, LPD).</p> </ul> </qt>"
-msgstr ""
-
-#: kpfilterpage.cpp:54
+#: driverview.cpp:47
 msgid ""
-" <qt> <b>Remove Filter button</b> "
-"<p>This button removes the highlighted filter from the list of filters. </qt>"
+" <qt>  <b>List of Driver Options (from PPD)</b>.  "
+"<p>The upper pane of this dialog page contains all printjob options as laid  "
+"down in the printer's description file (PostScript Printer Description == "
+"'PPD') </p> "
+"<p>Click on any item in the list and watch the lower pane of this dialog page  "
+"display the available values. </p>  "
+"<p>Set the values as needed. Then use one of the pushbuttons below to "
+"proceed:</p>  "
+"<ul>  "
+"<li><em>'Save'</em> your settings if you want to re-use  them in your next "
+"job(s) too. <em>'Save'</em> will store your settings permanently until  you "
+"change them again. </li>. "
+"<li>Click <em>'OK'</em> (without a prior click on <em>'Save'</em>"
+", if you want to use  your selected settings just once, for the next print job. "
+"<em>'OK'</em>  will forget your current settings when kprinter is closed again, "
+"and will start next time  with the previously saved defaults. </li> "
+"<li><em>'Cancel'</em> will not change anything. If you proceed to print after "
+"clicking  <em>'Cancel'</em>, the job will print with the default settings of "
+"this queue.  </ul> "
+"<p><b>Note.</b> The number of available job options depends strongly on the "
+"actual  driver used for your print queue. <em>'Raw'</em> "
+"queues do not have a driver or a   PPD. For raw queues this tab page is not "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
 msgstr ""
-"<qt>Ovo dugme uklanja istaknutu datoteku iz liste datoteka za štampanje.</qt>"
 
-#: kpfilterpage.cpp:59
+#: driverview.cpp:71
 msgid ""
-" <qt> <b>Move Filter Up button</b> "
-"<p>This button moves the highlighted filter up in the list of filters, towards "
-"the front of the filtering chain. </p> </qt>"
+" <qt>  <b>List of Possible Values for given Option (from PPD)</b>.  "
+"<p>The lower pane of this dialog page contains all possible values of the "
+"printoption  highlighted above, as laid  down in the printer's description file "
+"(PostScript Printer Description == 'PPD') </p> "
+"<p>Select the value you want and proceed. </p>  "
+"<p>Then use one of the pushbuttons below to leave this dialog:</p>  "
+"<ul>  "
+"<li><em>'Save'</em> your settings if you want to re-use  them in your next "
+"job(s) too. <em>'Save'</em> will store your settings permanently until  you "
+"change them again. </li>. "
+"<li>Click <em>'OK'</em> if you want to use your selected settings just once, "
+"for the  next print job. <em>'OK'</em>  will forget your current settings when "
+"kprinter is closed again, and will start next time  with your previous "
+"defaults. </li> "
+"<li><em>'Cancel'</em> will not change anything. If you proceed to print after "
+"clicking  <em>'Cancel'</em>, the job will print with the default settings of "
+"this queue.  </ul> "
+"<p><b>Note.</b> The number of available job options depends strongly on the "
+"actual  driver used for your print queue. <em>'Raw'</em> "
+"queues do not have a driver or a   PPD. For raw queues this tab page is not "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.</p>  </qt>"
 msgstr ""
-"<qt>"
-"<p>Ovo dugme pomjera istaknutu datoteku za jedno mesto na gore u listi datoteka "
-"za štampanje.</p>"
-"<p>Prosto rečeno, ovo mijenja redoslijed datoteka za štampanje.</p></qt>"
 
-#: kpfilterpage.cpp:64
-msgid ""
-" <qt> <b>Move Filter Down button</b> "
-"<p>This button moves the highlighted filter down in the list of filters, "
-"towards the end of the filtering chain..</p> </qt>"
-msgstr ""
-"<qt>"
-"<p>Ovo dugme pomjera istaknutu datoteku za jedno mesto na dolje u listi "
-"datoteka za štampanje.</p>"
-"<p>Prosto rečeno, ovo mijenja redoslijed datoteka za štampanje.</p></qt>"
+#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
+msgid "&Export..."
+msgstr "&Izvezi..."
 
-#: kpfilterpage.cpp:69
-msgid ""
-" <qt> <b>Configure Filter button</b> "
-"<p>This button lets you configure the currently highlighted filter. It opens a "
-"separate dialog.  </p> </qt>"
-msgstr ""
+#: kmfactory.cpp:221
+msgid "<qt>There was an error loading %1. The diagnostic is:<p>%2</p></qt>"
+msgstr "<qt>Došlo je do greške u učitavanju %1. Dijagnostika je:<p>%2</p></qt>"
 
-#: kpfilterpage.cpp:75
+#: kmspecialmanager.cpp:53
+#, fuzzy
 msgid ""
-" <qt> <b>Filter Info Pane</b> "
-"<p>This field shows some general info about the selected filter.  Amongst them "
-"are:  "
-"<ul>  "
-"<li>the <em>filter name</em> (as displayed in the TDEPrint user interface); "
-"</li>  "
-"<li>the <em>filter requirements</em> (that is the external program that needs  "
-"to present and executable on this system); </li>  "
-"<li>the <em>filter input format</em> (in the form of one or several <em>"
-"MIME types</em> accepted by the filter); </li>  "
-"<li>the <em>filter output format</em> (in the form of a <em>MIME type</em>  "
-"generated by the filter); </li>  "
-"<li>a more or less verbose text describing the filter's operation.</li>  </ul>  "
-"</p> </qt>"
+"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
+"This file probably comes from a previous KDE release and should be removed in "
+"order to manage global pseudo printers."
 msgstr ""
+"U vašem lokalnom TDE direktoriju pronađena je datoteka "
+"share/tdeprint/specials.desktop. Ova datoteka je vjerovatno ostala od nekog od "
+"ranijih izdanja TDEa i treba je ukloniti kako bi se moglo upravljati globalnim "
+"pseudo štampačima."
 
-#: kpfilterpage.cpp:91
+#: tdeprintd.cpp:176
 msgid ""
-" <qt> <b>Filtering Chain</b> (if enabled, is run <em>before</em> "
-"actual  job submission to print system) "
-"<p>This field shows which filters are currently selected to act as "
-"'pre-filters'  for TDEPrint. Pre-filters are processing the print files <em>"
-"before</em> they are  send downstream to your real print subsystem. </p>  "
-"<p>The list shown in this field may be empty (default). </p>  "
-"<p>The pre-filters act on the printjob in the order they are listed (from top "
-"to bottom).  This is done by acting as a <em>filtering chain</em> "
-"where the output of one filter  acts as input to the next. By putting the "
-"filters into the wrong order, you can make  the filtering chain fail. For "
-"example: if your file is ASCII text, and you want the  output being processed "
-"by the 'Multipage per Sheet' filter, the first filter must be  one that "
-"processes ASCII into PostScript. </p>  "
-"<p>TDEPrint can utilize <em>any</em> external filtering program which you may "
-"find useful  through this interface. </p>  "
-"<p>TDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from TDEPrint. These "
-"pre-filters work <em>for all</em> print subsystems supported by TDEPrint (such "
-"as CUPS, LPRng and LPD), because they are not depending on these.</p> ."
-"<p> Amongst the pre-configured filters shipping with TDEPrint are: </p>  "
-"<ul>  "
-"<li>the <em>Enscript text filter</em>  </li>  "
-"<li>a <em>Multiple Pages per Sheet filter</em </li>  "
-"<li>a <em>PostScript to PDF converter</em>.</li>  "
-"<li>a <em>Page Selection/Ordering filter</em>.</li>  "
-"<li>a <em>Poster Printing filter</em>.</li>  "
-"<li>and some more..</li>  </ul>  To insert a filter into this list, simply "
-"click on the <em>funnel</em> icon (topmost on  the right icon column group) and "
-"proceed. </p> "
-"<p>Please click on the other elements of this dialog to learn more about the "
-"TDEPrint  pre-filters.  </p> </qt>"
+"Some of the files to print are not readable by the TDE print daemon. This may "
+"happen if you are trying to print as a different user to the one currently "
+"logged in. To continue printing, you need to provide root's password."
 msgstr ""
+"Neke od datoteka za štampu nisu čitljive za TDE print demon. Ovo se može desiti "
+"ako pokušavate štampati kao korisnik različit od onoga koji je prijavljen. Za "
+"nastavak štampanja, morate navesti root šifru."
 
-#: kpfilterpage.cpp:125
-msgid "Filters"
-msgstr "Filteri"
-
-#: kpfilterpage.cpp:141
-msgid "Add filter"
-msgstr "Dodaj filter"
-
-#: kpfilterpage.cpp:146
-msgid "Remove filter"
-msgstr "Ukloni filter"
-
-#: kpfilterpage.cpp:151
-msgid "Move filter up"
-msgstr "Pomjeri filter gore"
-
-#: kpfilterpage.cpp:156
-msgid "Move filter down"
-msgstr "Pomjeri filter dole"
-
-#: kpfilterpage.cpp:161
-msgid "Configure filter"
-msgstr "Podesi filter"
+#: tdeprintd.cpp:181
+msgid "Provide root's Password"
+msgstr "Navedite root šifru"
 
-#: kpfilterpage.cpp:279
-msgid "Internal error: unable to load filter."
-msgstr "Interna greška: ne mogu otvoriti filter."
+#: tdeprintd.cpp:200 tdeprintd.cpp:202
+#, c-format
+msgid "Printing Status - %1"
+msgstr "Status štampe - %1"
 
-#: kpfilterpage.cpp:394
-msgid ""
-"<p>The filter chain is wrong. The output format of at least one filter is not "
-"supported by its follower. See <b>Filters</b> tab for more information.</p>"
-msgstr ""
-"<p>Lanac filtera je pogrešan. Izlazni format makar jednog od filtera nije "
-"podržan kao ulaz njegovog sljedbenika. Pogledajte list <b>Filteri</b> "
-"za više informacija.</p>"
+#: tdeprintd.cpp:263
+msgid "Printing system"
+msgstr "Sistem štampe"
 
-#: kpfilterpage.cpp:408
-msgid "Input"
-msgstr "Ulaz"
+#: tdeprintd.cpp:266
+msgid "Authentication failed (user name=%1)"
+msgstr "Prijava nije uspjela (korisničko ime=%1)"
 
 #~ msgid "%1 &Handbook"
 #~ msgstr "%1 &Priručnik"