Second part of prior commit

1 files changed, 1712 insertions, 0 deletions

diff --git a/tde-i18n-et/messages/tdebase/ksysguard.po b/tde-i18n-et/messages/tdebase/ksysguard.po
new file mode 100644
index 00000000000..3e22cffb6ab
--- /dev/null
+++ b/tde-i18n-et/messages/tdebase/ksysguard.po
@@ -0,0 +1,1712 @@
+# translation of ksysguard.po to Estonian
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+# Hasso Tepper <hasso@estpak.ee>, 2002.
+# Marek Laane <bald@starman.ee>, 2003-2006.
+# Hasso Tepper <hasso@kde.org>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: ksysguard\n"
+"POT-Creation-Date: 2008-07-08 01:18+0200\n"
+"PO-Revision-Date: 2006-12-05 20:10+0200\n"
+"Last-Translator: Marek Laane <bald@starman.ee>\n"
+"Language-Team: Estonian <kde-et@linux.ee>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10\n"
+
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "Faili %1 pole võimalik avada."
+
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "Fail %1 ei sisalda korrektset XML-koodi."
+
+#: WorkSheet.cc:109
+msgid ""
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
+msgstr ""
+"Fail %1 ei sisalda korrektset töölaua definitsiooni, mis peab olema dokument "
+"tüübiga 'KSysGuardWorkSheet'."
+
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "Failis %1 on töölehe suurus vale."
+
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "Faili %1 salvestamine ebaõnnestus"
+
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "Lõikepuhver ei sisalda korrektset ekraanikirjeldust."
+
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "Ühendust masinaga '%1' pole võimalik luua."
+
+#: KSysGuardApplet.cc:209 WorkSheet.cc:331
+msgid "Select Display Type"
+msgstr "Vali ekraani tüüp"
+
+#: KSysGuardApplet.cc:210 WorkSheet.cc:332
+msgid "&Signal Plotter"
+msgstr "&Signaali plotter"
+
+#: KSysGuardApplet.cc:211 WorkSheet.cc:333
+msgid "&Multimeter"
+msgstr "&Tester"
+
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "&Ribagraafik"
+
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "S&ensorite logija"
+
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"Teade %1 käest:\n"
+"%2"
+
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "Taimeri seadistused"
+
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "Töölehe värskendamise intervalli kasutamine"
+
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "Värskendamise intervall:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
+#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#: rc.cpp:21
+#, no-c-format
+msgid " sec"
+msgstr " sek."
+
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr "Töölehe kõiki ekraane uuendatakse siin määratud aja järel."
+
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "Ühenduse loomine masinaga"
+
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "Masin:"
+
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "Sisesta siia masina nimi, millega sa soovid ühendust luua."
+
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "Ühenduse tüüp"
+
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
+
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr "Vali see, kui soovid teise masinaga ühenduse loomiseks kasutada ssh'd."
+
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
+
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr "Vali see, kui soovid teise masinaga ühenduse loomiseks kasutada rsh'd."
+
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "Deemon"
+
+#: ksgrd/HostConnector.cc:77
+msgid ""
+"Select this if you want to connect to a ksysguard daemon that is running on the "
+"machine you want to connect to, and is listening for client requests."
+msgstr ""
+"Vali see, kui soovid võtta ühendust ksysguardi deemoniga masinas, millega "
+"soovid ühendust võtta, ja kui see on valmis vastu võtma klientide päringuid."
+
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "Kohandatud käsk"
+
+#: ksgrd/HostConnector.cc:81
+msgid ""
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
+msgstr ""
+"Vali see, kui soovid teises masinas ksysguardd käivitamiseks kasutada alloleval "
+"väljal toodud käsurida."
+
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "Port:"
+
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr "Sisesta pordi number, kus ksysguardi deemon ühendusi jälgib."
+
+#: ksgrd/HostConnector.cc:93
+msgid "e.g.  3112"
+msgstr "nt.  3112"
+
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "Käsk:"
+
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr ""
+"Siia sisesta käsk, millega ksysguardd käivitatakse masinas, mida sa jälgida "
+"soovid."
+
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "nt. ssh -l root teine.masin.ee ksysguardd"
+
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "Globaalsed stiili seadistused"
+
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "Ekraani stiil"
+
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "Esimene esiplaani värv:"
+
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "Teine esiplaani värv:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
+#: ksgrd/StyleSettings.cc:61 rc.cpp:126
+#, no-c-format
+msgid "Alarm color:"
+msgstr "Alarmi värv:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
+#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
+#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
+#, no-c-format
+msgid "Background color:"
+msgstr "Tausta värv:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "Fondi suurus:"
+
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "Sensorite värvid"
+
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "Muuda värvi..."
+
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "Värv %1"
+
+#. i18n: file SystemLoad.sgrd line 5
+#: ksgrd/SensorManager.cc:50 rc.cpp:173
+msgid "CPU Load"
+msgstr "CPU koormus"
+
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "Jõudekoormus"
+
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
+#: ksysguard.cc:171
+msgid "System Load"
+msgstr "Süsteemi koormus"
+
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "Viisakas koormus"
+
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "Kasutaja koormus"
+
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "Mälu"
+
+#. i18n: file SystemLoad.sgrd line 13
+#: ksgrd/SensorManager.cc:56 rc.cpp:177
+msgid "Physical Memory"
+msgstr "Füüsiline mälu"
+
+#. i18n: file SystemLoad.sgrd line 21
+#: ksgrd/SensorManager.cc:57 rc.cpp:179
+msgid "Swap Memory"
+msgstr "Saalemälu"
+
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "Vahemälu"
+
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "Puhverdatud mälu"
+
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "Kasutatud mälu"
+
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "Rakenduse mälu"
+
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "Vaba mälu"
+
+#: ksgrd/SensorManager.cc:63
+msgid "Process Count"
+msgstr "Protsessi loendur"
+
+#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
+msgid "Process Controller"
+msgstr "Protsessi kontroller"
+
+#: ksgrd/SensorManager.cc:65
+msgid "Disk Throughput"
+msgstr "Ketta läbilaskevõime"
+
+#: ksgrd/SensorManager.cc:66
+msgid ""
+"_: CPU Load\n"
+"Load"
+msgstr "Koormus"
+
+#: ksgrd/SensorManager.cc:67
+msgid "Total Accesses"
+msgstr "Pöördumisi kokku"
+
+#: ksgrd/SensorManager.cc:68
+msgid "Read Accesses"
+msgstr "Pöördumisi lugemiseks"
+
+#: ksgrd/SensorManager.cc:69
+msgid "Write Accesses"
+msgstr "Pöördumisi kirjutamiseks"
+
+#: ksgrd/SensorManager.cc:70
+msgid "Read Data"
+msgstr "Andmete lugemine"
+
+#: ksgrd/SensorManager.cc:71
+msgid "Write Data"
+msgstr "Andmete kirjutamine"
+
+#: ksgrd/SensorManager.cc:72
+msgid "Pages In"
+msgstr "Lehekülgi sisse"
+
+#: ksgrd/SensorManager.cc:73
+msgid "Pages Out"
+msgstr "Lehekülgi välja"
+
+#: ksgrd/SensorManager.cc:74
+msgid "Context Switches"
+msgstr "Konteksti lülitid"
+
+#: ksgrd/SensorManager.cc:75
+msgid "Network"
+msgstr "Võrk"
+
+#: ksgrd/SensorManager.cc:76
+msgid "Interfaces"
+msgstr "Liidesed"
+
+#: ksgrd/SensorManager.cc:77
+msgid "Receiver"
+msgstr "Vastuvõtmine"
+
+#: ksgrd/SensorManager.cc:78
+msgid "Transmitter"
+msgstr "Saatmine"
+
+#: ksgrd/SensorManager.cc:79
+msgid "Data"
+msgstr "Andmed"
+
+#: ksgrd/SensorManager.cc:80
+msgid "Compressed Packets"
+msgstr "Pakitud paketid"
+
+#: ksgrd/SensorManager.cc:81
+msgid "Dropped Packets"
+msgstr "Mahavisatud paketid"
+
+#: ksgrd/SensorManager.cc:82
+msgid "Errors"
+msgstr "Vead"
+
+#: ksgrd/SensorManager.cc:83
+msgid "FIFO Overruns"
+msgstr "FIFO ületäitumised"
+
+#: ksgrd/SensorManager.cc:84
+msgid "Frame Errors"
+msgstr "Kaadri vead"
+
+#: ksgrd/SensorManager.cc:85
+msgid "Multicast"
+msgstr "Multicast"
+
+#: ksgrd/SensorManager.cc:86
+msgid "Packets"
+msgstr "Paketid"
+
+#: ksgrd/SensorManager.cc:87
+msgid "Carrier"
+msgstr "Carrier"
+
+#: ksgrd/SensorManager.cc:88
+msgid "Collisions"
+msgstr "Kollisioonid"
+
+#: ksgrd/SensorManager.cc:89
+msgid "Sockets"
+msgstr "Pesad"
+
+#: ksgrd/SensorManager.cc:90
+msgid "Total Number"
+msgstr "Koguarv"
+
+#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
+msgid "Table"
+msgstr "Tabel"
+
+#: ksgrd/SensorManager.cc:92
+msgid "Advanced Power Management"
+msgstr "Täiustatud energiahaldus"
+
+#: ksgrd/SensorManager.cc:93
+msgid "ACPI"
+msgstr "ACPI"
+
+#: ksgrd/SensorManager.cc:94
+msgid "Thermal Zone"
+msgstr "Soojustsoon"
+
+#: ksgrd/SensorManager.cc:95
+msgid "Temperature"
+msgstr "Temperatuur"
+
+#: ksgrd/SensorManager.cc:96
+msgid "Fan"
+msgstr "Ventilaator"
+
+#: ksgrd/SensorManager.cc:97
+msgid "State"
+msgstr "Olek"
+
+#: ksgrd/SensorManager.cc:98
+msgid "Battery"
+msgstr "Aku"
+
+#: ksgrd/SensorManager.cc:99
+msgid "Battery Charge"
+msgstr "Aku täituvus"
+
+#: ksgrd/SensorManager.cc:100
+msgid "Battery Usage"
+msgstr "Aku kasutus"
+
+#: ksgrd/SensorManager.cc:101
+msgid "Remaining Time"
+msgstr "Järelejäänud aeg"
+
+#: ksgrd/SensorManager.cc:102
+msgid "Interrupts"
+msgstr "Katkestused"
+
+#. i18n: file SystemLoad.sgrd line 10
+#: ksgrd/SensorManager.cc:103 rc.cpp:175
+msgid "Load Average (1 min)"
+msgstr "Keskmine koormus (1 min.)"
+
+#: ksgrd/SensorManager.cc:104
+msgid "Load Average (5 min)"
+msgstr "Keskmine koormus (5 min.)"
+
+#: ksgrd/SensorManager.cc:105
+msgid "Load Average (15 min)"
+msgstr "Keskmine koormus (15 min.)"
+
+#: ksgrd/SensorManager.cc:106
+msgid "Clock Frequency"
+msgstr "Kella sagedus"
+
+#: ksgrd/SensorManager.cc:107
+msgid "Hardware Sensors"
+msgstr "Riistvara sensorid"
+
+#: ksgrd/SensorManager.cc:108
+msgid "Partition Usage"
+msgstr "Partitsiooni kasutamine"
+
+#: ksgrd/SensorManager.cc:109
+msgid "Used Space"
+msgstr "Kasutatud ruum"
+
+#: ksgrd/SensorManager.cc:110
+msgid "Free Space"
+msgstr "Vaba ruum"
+
+#: ksgrd/SensorManager.cc:111
+msgid "Fill Level"
+msgstr "Täitumise tase"
+
+#: ksgrd/SensorManager.cc:115
+#, c-format
+msgid "CPU%1"
+msgstr "CPU%1"
+
+#: ksgrd/SensorManager.cc:117
+#, c-format
+msgid "Disk%1"
+msgstr "Ketas%1"
+
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Fan%1"
+msgstr "Ventilaator%1"
+
+#: ksgrd/SensorManager.cc:124
+#, c-format
+msgid "Temperature%1"
+msgstr "Temperatuur%1"
+
+#: ksgrd/SensorManager.cc:127
+msgid "Total"
+msgstr "Kokku"
+
+#: ksgrd/SensorManager.cc:133
+#, c-format
+msgid "Int%1"
+msgstr "Int%1"
+
+#: ksgrd/SensorManager.cc:140
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/s"
+
+#: ksgrd/SensorManager.cc:141
+msgid "kBytes"
+msgstr "kBaiti"
+
+#: ksgrd/SensorManager.cc:142
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "min."
+
+#: ksgrd/SensorManager.cc:143
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
+
+#: ksgrd/SensorManager.cc:146
+msgid "Integer Value"
+msgstr "Täisarvväärtus"
+
+#: ksgrd/SensorManager.cc:147
+msgid "Floating Point Value"
+msgstr "Ujukomaväärtus"
+
+#: ksgrd/SensorManager.cc:289
+msgid "Connection to %1 has been lost."
+msgstr "Ühendus masinaga %1 on katkenud."
+
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "Masin %1 keeldus ühendusest!"
+
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "Masinat %1 ei leitud"
+
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "Aegumine masinas %1"
+
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "Võrguviga masinas %1"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Hasso Tepper, Marek Laane"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "hasso@linux.ee, bald@starman.ee"
+
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"See on sinu tööruum. Siin hoitakse töölehti. Enne kui hakkad siia uusi "
+"sensoreid lohistama, pead looma uue töölehe (Fail -> Uus)."
+
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "Protsessitabel"
+
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "Leht %1"
+
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"Tööleht '%1' sisaldab salvestamata andmeid.\n"
+"Kas soovid töölehe salvestada?"
+
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|Sensorifailid"
+
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "Avatava töölehe valik"
+
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "Sul pole töölehte, mida oleks võimalik salvestada."
+
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "Aktiivse töölehe salvestamine"
+
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "Töölehte, mida oleks võimalik kustutada, ei ole olemas."
+
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "Faili ProcessTable.sgrd pole võimalik leida."
+
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "Süsteemi valvuri seadistused"
+
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "Ekraanide arv:"
+
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "Suuruse suhe:"
+
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
+
+#: SensorDisplayLib/ProcessList.cc:110
+msgid ""
+"_: process status\n"
+"running"
+msgstr "käivitatud"
+
+#: SensorDisplayLib/ProcessList.cc:112
+msgid ""
+"_: process status\n"
+"sleeping"
+msgstr "magav"
+
+#: SensorDisplayLib/ProcessList.cc:114
+msgid ""
+"_: process status\n"
+"disk sleep"
+msgstr "kettal magav"
+
+#: SensorDisplayLib/ProcessList.cc:115
+msgid ""
+"_: process status\n"
+"zombie"
+msgstr "zombi"
+
+#: SensorDisplayLib/ProcessList.cc:117
+msgid ""
+"_: process status\n"
+"stopped"
+msgstr "peatatud"
+
+#: SensorDisplayLib/ProcessList.cc:118
+msgid ""
+"_: process status\n"
+"paging"
+msgstr "saalitud"
+
+#: SensorDisplayLib/ProcessList.cc:119
+msgid ""
+"_: process status\n"
+"idle"
+msgstr "jõude"
+
+#: SensorDisplayLib/ProcessList.cc:250
+msgid "Remove Column"
+msgstr "Eemalda veerg"
+
+#: SensorDisplayLib/ProcessList.cc:251
+msgid "Add Column"
+msgstr "Lisa veerg"
+
+#: SensorDisplayLib/ProcessList.cc:252
+msgid "Help on Column"
+msgstr "Abi veeru kohta"
+
+#: SensorDisplayLib/ProcessController.cc:62
+#: SensorDisplayLib/ProcessList.cc:771
+msgid "Nice"
+msgstr "Viisakus"
+
+#: SensorDisplayLib/ProcessList.cc:776
+msgid "Hide Column"
+msgstr "Peida veerg"
+
+#: SensorDisplayLib/ProcessList.cc:782
+msgid "Show Column"
+msgstr "Näita veergu"
+
+#: SensorDisplayLib/ProcessList.cc:786
+msgid "Select All Processes"
+msgstr "Vali kõik protsessid"
+
+#: SensorDisplayLib/ProcessList.cc:787
+msgid "Unselect All Processes"
+msgstr "Tühista kõigi protsesside valimine"
+
+#: SensorDisplayLib/ProcessList.cc:793
+msgid "Select All Child Processes"
+msgstr "Vali kõik alamprotsessid"
+
+#: SensorDisplayLib/ProcessList.cc:794
+msgid "Unselect All Child Processes"
+msgstr "Tühista kõigi alamprotsesside valimine"
+
+#: SensorDisplayLib/ProcessList.cc:796
+msgid "SIGABRT"
+msgstr "SIGABRT"
+
+#: SensorDisplayLib/ProcessList.cc:797
+msgid "SIGALRM"
+msgstr "SIGALRM"
+
+#: SensorDisplayLib/ProcessList.cc:798
+msgid "SIGCHLD"
+msgstr "SIGCHLD"
+
+#: SensorDisplayLib/ProcessList.cc:799
+msgid "SIGCONT"
+msgstr "SIGCONT"
+
+#: SensorDisplayLib/ProcessList.cc:800
+msgid "SIGFPE"
+msgstr "SIGFPE"
+
+#: SensorDisplayLib/ProcessList.cc:801
+msgid "SIGHUP"
+msgstr "SIGHUP"
+
+#: SensorDisplayLib/ProcessList.cc:802
+msgid "SIGILL"
+msgstr "SIGILL"
+
+#: SensorDisplayLib/ProcessList.cc:803
+msgid "SIGINT"
+msgstr "SIGINT"
+
+#: SensorDisplayLib/ProcessList.cc:804
+msgid "SIGKILL"
+msgstr "SIGKILL"
+
+#: SensorDisplayLib/ProcessList.cc:805
+msgid "SIGPIPE"
+msgstr "SIGPIPE"
+
+#: SensorDisplayLib/ProcessList.cc:806
+msgid "SIGQUIT"
+msgstr "SIGQUIT"
+
+#: SensorDisplayLib/ProcessList.cc:807
+msgid "SIGSEGV"
+msgstr "SIGSEGV"
+
+#: SensorDisplayLib/ProcessList.cc:808
+msgid "SIGSTOP"
+msgstr "SIGSTOP"
+
+#: SensorDisplayLib/ProcessList.cc:809
+msgid "SIGTERM"
+msgstr "SIGTERM"
+
+#: SensorDisplayLib/ProcessList.cc:810
+msgid "SIGTSTP"
+msgstr "SIGTSTP"
+
+#: SensorDisplayLib/ProcessList.cc:811
+msgid "SIGTTIN"
+msgstr "SIGTTIN"
+
+#: SensorDisplayLib/ProcessList.cc:812
+msgid "SIGTTOU"
+msgstr "SIGTTOU"
+
+#: SensorDisplayLib/ProcessList.cc:813
+msgid "SIGUSR1"
+msgstr "SIGUSR1"
+
+#: SensorDisplayLib/ProcessList.cc:814
+msgid "SIGUSR2"
+msgstr "SIGUSR2"
+
+#: SensorDisplayLib/ProcessList.cc:817
+msgid "Send Signal"
+msgstr "Saada signaal"
+
+#: SensorDisplayLib/ProcessList.cc:825
+msgid "Renice Process..."
+msgstr "Muuda protsessi viisakust..."
+
+#: SensorDisplayLib/ProcessList.cc:873
+msgid ""
+"_n: Do you really want to send signal %1 to the selected process?\n"
+"Do you really want to send signal %1 to the %n selected processes?"
+msgstr ""
+"Kas tõesti saata valitud protsessile signaal %1?\n"
+"Kas tõesti saata %n valitud protsessile signaal %1?"
+
+#: SensorDisplayLib/ProcessList.cc:877
+msgid "Send"
+msgstr "Saada"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:43
+msgid "Edit BarGraph Preferences"
+msgstr "Ribagraafikute eelistuste redigeerimine"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:47
+msgid "Range"
+msgstr "Piirkond"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
+#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
+#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
+#, no-c-format
+msgid "Title"
+msgstr "Tiitel"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
+#: SensorDisplayLib/DancingBarsSettings.cc:54
+#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
+#, no-c-format
+msgid "Enter the title of the display here."
+msgstr "Sisesta siia ekraani tiitel."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:59
+msgid "Display Range"
+msgstr "Ekraani piirkond"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:63
+#: SensorDisplayLib/FancyPlotterSettings.cc:89
+msgid "Minimum value:"
+msgstr "Minimaalne väärtus:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:67
+#: SensorDisplayLib/FancyPlotterSettings.cc:95
+msgid ""
+"Enter the minimum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Siia sisesta minimaalne väärtus. Kui mõlemad väärtused on nullid, püütakse "
+"vahemik automaatselt ära arvata."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:71
+#: SensorDisplayLib/FancyPlotterSettings.cc:99
+msgid "Maximum value:"
+msgstr "Maksimaalne väärtus:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:75
+#: SensorDisplayLib/FancyPlotterSettings.cc:105
+msgid ""
+"Enter the maximum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Siia sisesta maksimaalne väärtus. Kui mõlemad väärtused on nullid, püütakse "
+"vahemik automaatselt ära arvata."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
+#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
+#, no-c-format
+msgid "Alarms"
+msgstr "Alarmid"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
+#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
+#, no-c-format
+msgid "Alarm for Minimum Value"
+msgstr "Alarm miinimumväärtuse korral"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:91
+#: SensorDisplayLib/DancingBarsSettings.cc:109
+msgid "Enable alarm"
+msgstr "Alarmi lubamine"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
+#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
+#, no-c-format
+msgid "Enable the minimum value alarm."
+msgstr "Minimaalse väärtuse alarmi lubamine."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
+#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
+#, no-c-format
+msgid "Lower limit:"
+msgstr "Alumine limiit:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
+#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
+#, no-c-format
+msgid "Alarm for Maximum Value"
+msgstr "Alarm maksimumväärtuse korral"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
+#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
+#, no-c-format
+msgid "Enable the maximum value alarm."
+msgstr "Maksimaalse väärtuse alarmi lubamine."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
+#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
+#, no-c-format
+msgid "Upper limit:"
+msgstr "Ülemine limiit:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:126
+msgid "Look"
+msgstr "Välimus"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:129
+msgid "Normal bar color:"
+msgstr "Tavaline ribagraafik:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:136
+msgid "Out-of-range color:"
+msgstr "Piirkonnast väljas värv:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:154
+msgid ""
+"This determines the size of the font used to print a label underneath the bars. "
+"Bars are automatically suppressed if text becomes too large, so it is advisable "
+"to use a small font size here."
+msgstr ""
+"See määrab ribagraafiku pealdise fondi suuruse. Graafikut tõmmatakse "
+"automaatselt koomale, kui tekst liiga suureks muutub, nii et soovitav on siin "
+"väikseid fonte kasutada."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:161
+#: SensorDisplayLib/FancyPlotterSettings.cc:224
+msgid "Sensors"
+msgstr "Sensorid"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:166
+#: SensorDisplayLib/FancyPlotterSettings.cc:231
+msgid "Host"
+msgstr "Masin"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:167
+#: SensorDisplayLib/FancyPlotterSettings.cc:232
+msgid "Sensor"
+msgstr "Sensor"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:168
+msgid "Label"
+msgstr "Pealdis"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:169
+#: SensorDisplayLib/FancyPlotterSettings.cc:233
+msgid "Unit"
+msgstr "Ühik"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "Staatus"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:174
+msgid "Edit..."
+msgstr "Muuda..."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:176
+msgid "Push this button to configure the label."
+msgstr "Pealdise seadistamiseks klõpsa sellel nupul."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:181
+#: SensorDisplayLib/FancyPlotterSettings.cc:249
+msgid "Push this button to delete the sensor."
+msgstr "Sensori kustutamiseks klõpsa sellel nupul."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:356
+msgid "Label of Bar Graph"
+msgstr "Ribagraafiku pealdis"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:357
+msgid "Enter new label:"
+msgstr "Sisesta uus pealdis:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:47
+msgid "Signal Plotter Settings"
+msgstr "Signaali plotteri seadistused"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:57
+msgid "Style"
+msgstr "Stiil"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:60
+msgid "Title:"
+msgstr "Tiitel:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:69
+msgid "Graph Drawing Style"
+msgstr "Graafiku joonistamise stiil"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:71
+msgid "Basic polygons"
+msgstr "Polügoonid"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:73
+msgid "Original - single line per data point"
+msgstr "Originaal - üksik joon andmepunktile"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:78
+msgid "Scales"
+msgstr "Skaalad"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:81
+msgid "Vertical Scale"
+msgstr "Vertikaalne skaala"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:85
+msgid "Automatic range detection"
+msgstr "Automaatne piirkonna valimine"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:86
+msgid ""
+"Check this box if you want the display range to adapt dynamically to the "
+"currently displayed values; if you do not check this, you have to specify the "
+"range you want in the fields below."
+msgstr ""
+"Lülita see sisse, kui soovid, et näitamise piirkonna suurus seataks "
+"automaatselt vastavalt näidatavatele väärtustele. Kui sa seda ei tee, siis pead "
+"määrama piirkonna allolevatel väljadel."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:111
+msgid "Horizontal Scale"
+msgstr "Horisontaalne skaala"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:120
+msgid "pixel(s) per time period"
+msgstr "pikslit ajavahemiku kohta"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:126
+msgid "Grid"
+msgstr "Alusvõrk"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:129
+msgid "Lines"
+msgstr "Jooned"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:133
+msgid "Vertical lines"
+msgstr "Vertikaalsed jooned"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:134
+msgid "Check this to activate the vertical lines if display is large enough."
+msgstr ""
+"Lülita see sisse, kui soovid näha graafikul vertikaalseid jooni (seda juhul, "
+"kui selleks ruumi on)."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:137
+msgid "Distance:"
+msgstr "Vahemaa:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:143
+msgid "Enter the distance between two vertical lines here."
+msgstr "Sisesta siia vahemaa kahe vertikaalse joone vahel."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:147
+msgid "Vertical lines scroll"
+msgstr "Vertikaalsete joonte kerimine"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:150
+msgid "Horizontal lines"
+msgstr "Horisontaalsed jooned"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:151
+msgid "Check this to enable horizontal lines if display is large enough."
+msgstr "Lülita see sisse, kui soovid näha horisontaalseid jooni graafikul."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:154
+msgid "Count:"
+msgstr "Arv:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:160
+msgid "Enter the number of horizontal lines here."
+msgstr "Sisesta siia horisontaalsete joonte arv."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
+#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
+#, no-c-format
+msgid "Text"
+msgstr "Tekst"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:172
+msgid "Labels"
+msgstr "Pealdised"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:173
+msgid ""
+"Check this box if horizontal lines should be decorated with the values they "
+"mark."
+msgstr ""
+"Lülita see sisse, kui soovid, et horisontaalsete joonte juures oleksid ka "
+"väärtused, mida nad tähistavad."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:185
+msgid "Top bar"
+msgstr "Ülemine riba"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:186
+msgid ""
+"Check this to active the display title bar. This is probably only useful for "
+"applet displays. The bar is only visible if the display is large enough."
+msgstr ""
+"Lülita see sisse, kui soovid näha tiitliriba. See on ilmselt mõttekas ainult "
+"apleti puhul. Riba näidatakse ainult siis, kui ekraan on piisavalt suur."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
+#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
+#: rc.cpp:117 rc.cpp:138
+#, no-c-format
+msgid "Colors"
+msgstr "Värvid"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:196
+msgid "Vertical lines:"
+msgstr "Vertikaalsed jooned:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:203
+msgid "Horizontal lines:"
+msgstr "Horisontaalsed jooned:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:210
+msgid "Background:"
+msgstr "Taust:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:242
+msgid "Set Color..."
+msgstr "Vali värv..."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:244
+msgid "Push this button to configure the color of the sensor in the diagram."
+msgstr "Selle sensori diagrammi värvi seadistamiseks klõpsa sellel nupul."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:252
+msgid "Move Up"
+msgstr "Liiguta üles"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:256
+msgid "Move Down"
+msgstr "Liiguta alla"
+
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "Sensorite logija"
+
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "Käivita &süsteemi valvur"
+
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "&Omadused"
+
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "&Eemalda ekraan"
+
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "&Määra värskendamise intervall..."
+
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "Jät&ka värskendamist"
+
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "Pea&ta värskendamine"
+
+#: SensorDisplayLib/SensorDisplay.cc:240
+msgid ""
+"<qt>"
+"<p>This is a sensor display. To customize a sensor display click and hold the "
+"right mouse button on either the frame or the display box and select the <i>"
+"Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
+msgstr ""
+"<qt>"
+"<p>See on sensorite ekraan. Sensorite ekraani kohandamiseks klõpsa ja hoia all "
+"paremat hiirenuppu kas raamil või ekraani kastil ning vali hüpikmenüüst <i>"
+"Omadused</i>. Ekraani eemaldamiseks lehelt vali <i>Eemalda</i>.</p>%1</qt>"
+
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "Logimine"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
+#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
+#, no-c-format
+msgid "Timer Interval"
+msgstr "Taimeri intervall"
+
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "Sensori nimi"
+
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "Masina nimi"
+
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "Logifail"
+
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "&Eemalda sensor"
+
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "&Redigeeri sensorit"
+
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "&Peata logimine"
+
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "Alus&ta logimist"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
+#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
+#, no-c-format
+msgid "Foreground color:"
+msgstr "Esiplaani värv:"
+
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "Testri seadistused"
+
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "Nimekirjavaate seadistused"
+
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "Protsessi viisakuse muutmine"
+
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+"Sa soovisid muuta protsessi %1 planeerimise prioriteeti.\n"
+"Ainult administraator (root) saab vähendada protsessi viisakuse\n"
+"astet. Mida väiksem on arv, seda kõrgem on prioriteet.\n"
+"\n"
+"Palun sisesta soovitud viisakuse aste:"
+
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "Sensorite logija seadistused"
+
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "Kukuta sensor siia"
+
+#: SensorDisplayLib/DummyDisplay.cc:38
+msgid ""
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor the "
+"values of the sensor over time."
+msgstr ""
+"See on vaba ruum töölehel. Lohista ja kukuta sensorite lehitsejast mõni sensor "
+"siia. Ilmub sensori ekraan, mis võimaldab jälgida sensori väärtuse muutumist "
+"ajas."
+
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "Nimi"
+
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
+
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
+
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
+
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
+
+#: SensorDisplayLib/ProcessController.cc:60
+#, c-format
+msgid "User%"
+msgstr "Kasutaja%"
+
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "Süsteemi%"
+
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "VM suurus"
+
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "VMRss"
+
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "Kasutajanimi"
+
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "Käsk"
+
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "Kõik protsessid"
+
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "Süsteemsed protsessid"
+
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "Kasutaja protsessid"
+
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "Oma protsessid"
+
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "&Puu"
+
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "&Värskenda"
+
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "&Tapa"
+
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1: jooksvad protsessid"
+
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "Esmalt tuleb valida protsess."
+
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
+msgid ""
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr ""
+"Soovid sa valitud protsessi maha tappa?\n"
+"Soovid sa %n valitud protsessi maha tappa?"
+
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "Protsessi tapmine"
+
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "Tapa"
+
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "Rohkem ei küsita"
+
+#: SensorDisplayLib/ProcessController.cc:344
+#, c-format
+msgid "Error while attempting to kill process %1."
+msgstr "Viga protsessi %1 tapmiskatsel."
+
+#: SensorDisplayLib/ProcessController.cc:349
+#, c-format
+msgid "Insufficient permissions to kill process %1."
+msgstr "Sul pole õigust tappa protsessi %1."
+
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "Protsess %1 on juba kadunud."
+
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "Vigane signaal."
+
+#: SensorDisplayLib/ProcessController.cc:379
+#, c-format
+msgid "Error while attempting to renice process %1."
+msgstr "Viga protsessi %1 viisakuse astme muutmiskatsel."
+
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "Sul pole õigust muuta %1 viisakuse astet."
+
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "Vigane argument."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
+#: rc.cpp:27 rc.cpp:78
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "Alarmi lubamin&e"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
+#: rc.cpp:39 rc.cpp:66
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "Alarmi lubami&ne"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
+#: rc.cpp:54
+#, no-c-format
+msgid "&Show unit"
+msgstr "Ü&hiku näitamine"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
+#: rc.cpp:57
+#, no-c-format
+msgid "Enable this to append the unit to the title of the display."
+msgstr "Lülita see sisse, kui soovid lisada elemendi ekraani tiitlile."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
+#: rc.cpp:90
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "Tavalise numbri värv:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
+#: rc.cpp:93
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "Alarmi numbri värv:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
+#: rc.cpp:105 rc.cpp:120
+#, no-c-format
+msgid "Text color:"
+msgstr "Teksti värv:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
+#: rc.cpp:108
+#, no-c-format
+msgid "Grid color:"
+msgstr "Alusvõrgu värv:"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
+#: rc.cpp:129
+#, no-c-format
+msgid "Log File Settings"
+msgstr "Logifaili seadistused"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
+#: rc.cpp:150
+#, no-c-format
+msgid "Select Font..."
+msgstr "Vali font..."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
+#: rc.cpp:153
+#, no-c-format
+msgid "Filter"
+msgstr "Filter"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
+#: rc.cpp:156
+#, no-c-format
+msgid "&Add"
+msgstr "Lis&a"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
+#: rc.cpp:162
+#, no-c-format
+msgid "&Change"
+msgstr "&Muuda"
+
+#. i18n: file KSysGuardApplet.xml line 5
+#: rc.cpp:181
+msgid "CPU"
+msgstr "CPU"
+
+#. i18n: file KSysGuardApplet.xml line 10
+#: rc.cpp:183
+msgid "Mem"
+msgstr "Mälu"
+
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "Töölehe omadused"
+
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "Read:"
+
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "Veerud:"
+
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "Sisesta siia arv, kui palju peaks töölehel ridu olema."
+
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "Sisesta siia arv, kui palju peaks töölehel olema veerge."
+
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "Sisesta siia töölehe tiitel."
+
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "&Tantsisklevad ribagraafikud"
+
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+msgid ""
+"The KSysGuard applet does not support displaying of this type of sensor. Please "
+"choose another sensor."
+msgstr ""
+"KDE süsteemi valvuri aplett ei toeta seda tüüpi sensori näitamist. Palun vali "
+"mõni muu sensor."
+
+#: KSysGuardApplet.cc:334
+msgid ""
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
+msgstr ""
+"Fail %1 ei sisalda korrektset apleti definitsiooni, mis peab olema dokument "
+"tüübiga 'KSysGuardWorkSheet'"
+
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the KDE System Guard into this cell."
+msgstr "Lohista siia sensorid KDE süsteemi valvurist."
+
+#: SensorBrowser.cc:77
+msgid "Sensor Browser"
+msgstr "Sensorite brauser"
+
+#: SensorBrowser.cc:78
+msgid "Sensor Type"
+msgstr "Sensori tüüp"
+
+#: SensorBrowser.cc:81
+msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+msgstr "Väljade puhastamiseks töölehel või paneeli apletil lohista sensoreid."
+
+#: SensorBrowser.cc:88
+msgid ""
+"The sensor browser lists the connected hosts and the sensors that they provide. "
+"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
+"display will appear that visualizes the values provided by the sensor. Some "
+"sensor displays can display values of multiple sensors. Simply drag other "
+"sensors on to the display to add more sensors."
+msgstr ""
+"Sensorite lehitsemise nimekirjas on masinad ja sensorid, mida on võimalik "
+"kasutada. Sensoreid on võimalik lohistada töölehe või paneeli apleti kukutamise "
+"tsooni. Ilmub ekraan, kus näidatakse sensori jälgitava väärtuse muutumist ajas. "
+"Mõned sensori ekraanid suudavad näidata mitme sensori väärtusi. Sensorite "
+"lisamiseks lohista nad lihtsalt ekraanile."
+
+#: SensorBrowser.cc:148
+msgid "Drag sensors to empty fields in a worksheet."
+msgstr "Lohista sensorid töölehe tühjadele väljadele."
+
+#: ksysguard.cc:64
+msgid "KDE system guard"
+msgstr "KDE süsteemi valvur"
+
+#: ksysguard.cc:74 ksysguard.cc:556
+msgid "KDE System Guard"
+msgstr "KDE süsteemi valvur"
+
+#: ksysguard.cc:100
+msgid "88888 Processes"
+msgstr "88888 protsessi"
+
+#: ksysguard.cc:101
+msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+msgstr "Mälu: 88888888888 kB kasutusel, 88888888888 kB vaba"
+
+#: ksysguard.cc:103
+msgid "Swap: 888888888 kB used, 888888888 kB free"
+msgstr "Saalemälu: 888888888 kB kasutusel, 888888888 kB vaba"
+
+#: ksysguard.cc:108
+msgid "&New Worksheet..."
+msgstr "&Uus tööleht..."
+
+#: ksysguard.cc:111
+msgid "Import Worksheet..."
+msgstr "Impordi tööleht..."
+
+#: ksysguard.cc:114
+msgid "&Import Recent Worksheet"
+msgstr "&Impordi viimati kasutatud tööleht"
+
+#: ksysguard.cc:117
+msgid "&Remove Worksheet"
+msgstr "&Eemalda tööleht"
+
+#: ksysguard.cc:120
+msgid "&Export Worksheet..."
+msgstr "Ekspo&rdi tööleht..."
+
+#: ksysguard.cc:125
+msgid "C&onnect Host..."
+msgstr "L&oo ühendus masinaga..."
+
+#: ksysguard.cc:127
+msgid "D&isconnect Host"
+msgstr "&Katkesta ühendus masinaga"
+
+#: ksysguard.cc:133
+msgid "&Worksheet Properties"
+msgstr "&Töölehe omadused"
+
+#: ksysguard.cc:136
+msgid "Load Standard Sheets"
+msgstr "Laadi standardsed töölehed"
+
+#: ksysguard.cc:140
+msgid "Configure &Style..."
+msgstr "Seadista &stiili..."
+
+#: ksysguard.cc:157
+msgid "Do you really want to restore the default worksheets?"
+msgstr "Kas tõesti taastada vaiketöölehed?"
+
+#: ksysguard.cc:158
+msgid "Reset All Worksheets"
+msgstr "Kõigi töölehtede lähtestamine"
+
+#: ksysguard.cc:159
+msgid "Reset"
+msgstr "Taasta"
+
+#: ksysguard.cc:436
+#, c-format
+msgid ""
+"_n: 1 Process\n"
+"%n Processes"
+msgstr ""
+"1 protsess\n"
+"%n protsessi"
+
+#: ksysguard.cc:446
+msgid "Memory: %1 %2 used, %3 %4 free"
+msgstr "Mälu: %1 %2 kasutusel, %3 %4 vaba"
+
+#: ksysguard.cc:504
+msgid "No swap space available"
+msgstr "Saalemälu pole saadaval"
+
+#: ksysguard.cc:506
+msgid "Swap: %1 %2 used, %3 %4 free"
+msgstr "Saalemälu: %1 %2 kasutusel, %3 %4 vaba"
+
+#: ksysguard.cc:515
+msgid "Show only process list of local host"
+msgstr "Näita ainult kohaliku masina protsessitabelit"
+
+#: ksysguard.cc:516
+msgid "Optional worksheet files to load"
+msgstr "Täiendav avatav tööleht"
+
+#: ksysguard.cc:558
+msgid "(c) 1996-2002 The KSysGuard Developers"
+msgstr "(c) 1996-2002: KSysGuardi arendajad"
+
+#: ksysguard.cc:566
+msgid ""
+"Solaris Support\n"
+"Parts derived (by permission) from the sunos5\n"
+"module of William LeFebvre's \"top\" utility."
+msgstr ""
+"Solarise tugi\n"
+"Osaliselt (loaga) võetud William LeFebvre'i utiliidi\n"
+"\"top\" sunos5 moodulist."