Second part of prior commit

1 files changed, 652 insertions, 0 deletions

diff --git a/tde-i18n-eu/messages/tdenetwork/kcmwifi.po b/tde-i18n-eu/messages/tdenetwork/kcmwifi.po
new file mode 100644
index 00000000000..cb86cc42558
--- /dev/null
+++ b/tde-i18n-eu/messages/tdenetwork/kcmwifi.po
@@ -0,0 +1,652 @@
+# translation of kcmwifi.po to
+# Copyright (C) 2003, 2005, 2006 Free Software Foundation, Inc.
+#
+# Marcos Goienetxe <marcos@euskalgnu.org>, 2003, 2005.
+# Ion Gaztañaga <igaztanaga@gmail.com>, 2005.
+# marcos <marcos@euskalgnu.org>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmwifi\n"
+"POT-Creation-Date: 2006-11-25 02:36+0100\n"
+"PO-Revision-Date: 2006-01-23 08:30+0100\n"
+"Last-Translator: marcos <marcos@euskalgnu.org>\n"
+"Language-Team:  <eu@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.1\n"
+
+#: ifconfigpage.cpp:136
+msgid "Configure Power Mode"
+msgstr "Konfiguratu energia modua"
+
+#: ifconfigpage.cpp:156
+msgid "Configure Encryption"
+msgstr "Konfiguratu enkriptatzea"
+
+#: kcmwifi.cpp:57 kcmwifi.cpp:172
+#, c-format
+msgid "Config &%1"
+msgstr "%1 Konfigurazioa"
+
+#: kcmwifi.cpp:82
+msgid ""
+"Error executing iwconfig. WLAN configurations can only be altered if the "
+"wireless tools are properly installed."
+msgstr ""
+"Errorea iwconfig exekutatzen. WLAN konfigurazioak kablerik gabeko tresnak ongi "
+"instalatuta badaude bakarrik alda daitezke."
+
+#: kcmwifi.cpp:84
+msgid "No Wireless Tools"
+msgstr "Kablerik gabeko tresnik ez"
+
+#: kcmwifi.cpp:149 mainconfig.cpp:94
+#, c-format
+msgid "Vendor %1"
+msgstr "Saltzailea: %1"
+
+#: kcmwifi.cpp:239
+msgid ""
+"Interface could not be shut down.  It is likely that your settings have not "
+"been applied."
+msgstr ""
+"Ezin izan da interfazea itzali. Seguruenik zure ezarpenak ez dira aplikatu."
+
+#: kcmwifi.cpp:252
+msgid "SSID could not be set."
+msgstr "Ezin izan da SSID-a ezarri."
+
+#: kcmwifi.cpp:265
+msgid "Operation mode could not be set."
+msgstr "Ezin izan da eragiketa modua ezarri."
+
+#: kcmwifi.cpp:278
+msgid "Speed settings could not be modified."
+msgstr "Ezin dira abiaduraren ezarpenak aldatu."
+
+#: kcmwifi.cpp:321
+msgid "Encryption settings could not be set."
+msgstr "Ezin izan dira enkriptazioaren ezarpenak ezarri."
+
+#: kcmwifi.cpp:348
+msgid "Power management settings could not be set."
+msgstr "Ezin izan dira energia-kudeaketaren ezarpenak ezarri."
+
+#: kcmwifi.cpp:359
+msgid "Interface could not be re-enabled."
+msgstr "Ezin izan da interfazea bergaitu."
+
+#: kcmwifi.cpp:369
+msgid "The following settings could not be applied:"
+msgstr "Ezin izan dira ondorengo ezarpenak ezarri:"
+
+#: mainconfig.cpp:42 mainconfig.cpp:99
+#, c-format
+msgid "Config %1"
+msgstr "%1 konfigurazioa"
+
+#. i18n: file configadvanced.ui line 41
+#: rc.cpp:3
+#, no-c-format
+msgid "Channel:"
+msgstr "Kanala:"
+
+#. i18n: file configadvanced.ui line 57
+#: rc.cpp:6
+#, no-c-format
+msgid "Transmit power:"
+msgstr "Transmisio potentzia:"
+
+#. i18n: file configadvanced.ui line 86
+#: rc.cpp:9
+#, no-c-format
+msgid "Force registration to an access point"
+msgstr "Behartu erregistroa atzipen gunean"
+
+#. i18n: file configadvanced.ui line 127
+#: rc.cpp:12
+#, no-c-format
+msgid "MAC address:"
+msgstr "MAC helbidea:"
+
+#. i18n: file configcrypto.ui line 35
+#: rc.cpp:15
+#, no-c-format
+msgid "Crypto Keys"
+msgstr "Giltza kriptografikoak"
+
+#. i18n: file configcrypto.ui line 46
+#: rc.cpp:18
+#, no-c-format
+msgid "Key 1:"
+msgstr "1. giltza:"
+
+#. i18n: file configcrypto.ui line 49
+#: rc.cpp:21
+#, no-c-format
+msgid ""
+"The first encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Lehenengo enkriptazio gakoa. 5 edo 13 karaktere ASCII karaktereak dira, 10 edo "
+"26 karaktere hamaseitarrak dira."
+
+#. i18n: file configcrypto.ui line 57
+#: rc.cpp:24
+#, no-c-format
+msgid "Key 3:"
+msgstr "3. giltza:"
+
+#. i18n: file configcrypto.ui line 60
+#: rc.cpp:27
+#, no-c-format
+msgid ""
+"The third encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Hirugarren enkriptazio gakoa. 5 edo 13 karaktere ASCII karaktereak dira, 10 edo "
+"26 karaktere hamaseitarrak dira."
+
+#. i18n: file configcrypto.ui line 68
+#: rc.cpp:30
+#, no-c-format
+msgid "Key 2:"
+msgstr "2. giltza:"
+
+#. i18n: file configcrypto.ui line 71
+#: rc.cpp:33
+#, no-c-format
+msgid ""
+"The second encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Bigarren enkriptazio gakoa. 5 edo 13 karaktere ASCII karaktereak dira, 10 edo "
+"26 karaktere hamaseitarrak dira."
+
+#. i18n: file configcrypto.ui line 79
+#: rc.cpp:36
+#, no-c-format
+msgid "Key 4:"
+msgstr "4. giltza:"
+
+#. i18n: file configcrypto.ui line 82
+#: rc.cpp:39
+#, no-c-format
+msgid ""
+"The fourth encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Laugarren enkriptazio gakoa. 5 edo 13 karaktere ASCII karaktereak dira, 10 edo "
+"26 karaktere hamaseitarrak dira."
+
+#. i18n: file configcrypto.ui line 98
+#: rc.cpp:42
+#, no-c-format
+msgid "<font color=\"#ff0000\">unrecognized</font>"
+msgstr "<font color=\"#ff0000\">ezezaguna</font>"
+
+#. i18n: file configcrypto.ui line 117
+#: rc.cpp:45 rc.cpp:48 rc.cpp:51
+#, no-c-format
+msgid "<font color=\"#ff0000\">unrecognised</font>"
+msgstr "<font color=\"#ff0000\">ezezaguna</font>"
+
+#. i18n: file configcrypto.ui line 220
+#: rc.cpp:54
+#, no-c-format
+msgid "Crypto Mode"
+msgstr "Kriptografia modua"
+
+#. i18n: file configcrypto.ui line 223
+#: rc.cpp:57
+#, no-c-format
+msgid "Sets which types of packets the card will accept."
+msgstr "Ezarri txartelak onartuko dituen pakete motak."
+
+#. i18n: file configcrypto.ui line 234
+#: rc.cpp:60
+#, no-c-format
+msgid "Ope&n"
+msgstr "I&reki"
+
+#. i18n: file configcrypto.ui line 237
+#: rc.cpp:63
+#, no-c-format
+msgid "Makes the card accept encrypted and unencrypted packets."
+msgstr ""
+"Txartelak enkriptatu eta desenktriptatutako paketeak onartzea gaitzen du."
+
+#. i18n: file configcrypto.ui line 245
+#: rc.cpp:66
+#, no-c-format
+msgid "Restricted"
+msgstr "Mutatuta"
+
+#. i18n: file configcrypto.ui line 248
+#: rc.cpp:69
+#, no-c-format
+msgid "Makes the card only accept encrypted packets."
+msgstr "Txartelak enktriptatutako paketeak bakarrik onartzea gaitzen du."
+
+#. i18n: file configcrypto.ui line 275
+#: rc.cpp:72
+#, no-c-format
+msgid "Key to use:"
+msgstr "Erabiltzeko giltzak:"
+
+#. i18n: file configcrypto.ui line 278
+#: rc.cpp:75
+#, no-c-format
+msgid "Sets which of the four keys is to be used for transmitting packets."
+msgstr "Paketeak bidaltzeko lau gakoetatik zein erabiliko den ezartzen du."
+
+#. i18n: file configcrypto.ui line 284
+#: rc.cpp:78
+#, no-c-format
+msgid "Key 1"
+msgstr "1. giltza"
+
+#. i18n: file configcrypto.ui line 289
+#: rc.cpp:81
+#, no-c-format
+msgid "Key 2"
+msgstr "2. giltza"
+
+#. i18n: file configcrypto.ui line 294
+#: rc.cpp:84
+#, no-c-format
+msgid "Key 3"
+msgstr "3. giltza"
+
+#. i18n: file configcrypto.ui line 299
+#: rc.cpp:87
+#, no-c-format
+msgid "Key 4"
+msgstr "4. giltza"
+
+#. i18n: file configpower.ui line 27
+#: rc.cpp:90
+#, no-c-format
+msgid "Sleep timeout:"
+msgstr "Itxaroteko atzerapena:"
+
+#. i18n: file configpower.ui line 30
+#: rc.cpp:93
+#, no-c-format
+msgid ""
+"Sets how long the card will be offline before looking for new packages again."
+msgstr ""
+"Pakete berrien bila berriro hasi aurretik txartela lineaz kanpo egongo den "
+"denbora ezartzen du."
+
+#. i18n: file configpower.ui line 55
+#: rc.cpp:96 rc.cpp:129
+#, no-c-format
+msgid " sec"
+msgstr " seg"
+
+#. i18n: file configpower.ui line 63
+#: rc.cpp:99
+#, no-c-format
+msgid "Wakeup period:"
+msgstr "Itzartzeko tartea:"
+
+#. i18n: file configpower.ui line 66
+#: rc.cpp:102
+#, no-c-format
+msgid ""
+"Sets how long the card will be online and looking for new packages before it "
+"falls asleep."
+msgstr ""
+"Txartelak lo hartu aurretik linean eta pakete berrien bila egongo den denbora "
+"ezartzen du."
+
+#. i18n: file configpower.ui line 74
+#: rc.cpp:105
+#, no-c-format
+msgid "Receive Packets"
+msgstr "Jasotako paketeak"
+
+#. i18n: file configpower.ui line 77
+#: rc.cpp:108
+#, no-c-format
+msgid "Sets which sort of packets to listen to."
+msgstr "Ezarri zein pakete motak entzungo dituen."
+
+#. i18n: file configpower.ui line 88
+#: rc.cpp:111
+#, no-c-format
+msgid "All"
+msgstr "Denak"
+
+#. i18n: file configpower.ui line 91
+#: rc.cpp:114
+#, no-c-format
+msgid "Listen to all packet types."
+msgstr "Entzun pakete mota guztiak."
+
+#. i18n: file configpower.ui line 99
+#: rc.cpp:117
+#, no-c-format
+msgid "Unicast only"
+msgstr "Unicast bakarrik"
+
+#. i18n: file configpower.ui line 102
+#: rc.cpp:120
+#, no-c-format
+msgid "Listen to Unicast packets only."
+msgstr "Entzun Unicast paketeak bakarrik."
+
+#. i18n: file configpower.ui line 110
+#: rc.cpp:123
+#, no-c-format
+msgid "Multicast/Broadcast only"
+msgstr "Multicast/Broadcast bakarrik"
+
+#. i18n: file configpower.ui line 113
+#: rc.cpp:126
+#, no-c-format
+msgid "Listen to Multicast and Broadcast packets only."
+msgstr "Entzun Multicast eta  Broadcast paketeak bakarrik."
+
+#. i18n: file ifconfigpagebase.ui line 32
+#: rc.cpp:132
+#, no-c-format
+msgid "Network name:"
+msgstr "Sare izena:"
+
+#. i18n: file ifconfigpagebase.ui line 35
+#: rc.cpp:135 rc.cpp:141
+#, no-c-format
+msgid ""
+"SSID of the network to connect to. \"any\" means \"arbitrary available "
+"network\"."
+msgstr ""
+"Konektatzeko sarearen SSID-a. \"edozein\"-ek \"eskuragarri dagoen sare "
+"arbitrarioa\" esan nahi du."
+
+#. i18n: file ifconfigpagebase.ui line 48
+#: rc.cpp:138
+#, fuzzy, no-c-format
+msgid "Interface:"
+msgstr "Interfazea: Autodetektatu?"
+
+#. i18n: file ifconfigpagebase.ui line 67
+#: rc.cpp:144
+#, fuzzy, no-c-format
+msgid "Autodetect"
+msgstr "Interfazea: Autodetektatu?"
+
+#. i18n: file ifconfigpagebase.ui line 105
+#: rc.cpp:147
+#, no-c-format
+msgid "Script:"
+msgstr "Script-a:"
+
+#. i18n: file ifconfigpagebase.ui line 108
+#: rc.cpp:150
+#, no-c-format
+msgid ""
+"Command to perform after the connection is established, e.g. for obtaining a "
+"DHCP lease."
+msgstr ""
+"Konexioa ezartzen den ondoren exekutatzeko agindua, adibidez, DHCP bidez "
+"helbide bat eskuratzeko."
+
+#. i18n: file ifconfigpagebase.ui line 151
+#: rc.cpp:153
+#, no-c-format
+msgid "Enable power management"
+msgstr "Gaitu energia-kudeaketa"
+
+#. i18n: file ifconfigpagebase.ui line 154
+#: rc.cpp:156
+#, no-c-format
+msgid "Enables advanced power management settings."
+msgstr "Energia-kudeaketa aurreratuaren ezarpenak gaitzen ditu."
+
+#. i18n: file ifconfigpagebase.ui line 165
+#: rc.cpp:159 rc.cpp:243
+#, no-c-format
+msgid "Configure..."
+msgstr "Konfiguratu..."
+
+#. i18n: file ifconfigpagebase.ui line 168
+#: rc.cpp:162
+#, no-c-format
+msgid "Clicking this button opens the Power Management menu."
+msgstr "Botoi hau klikatzen baduzu Energia-kudeaketa menua irekiko da."
+
+#. i18n: file ifconfigpagebase.ui line 203
+#: rc.cpp:165
+#, no-c-format
+msgid "Speed:"
+msgstr "Abiadura:"
+
+#. i18n: file ifconfigpagebase.ui line 206
+#: rc.cpp:168
+#, no-c-format
+msgid "Sets the connection speed. Not all cards support this."
+msgstr ""
+"Konexioaren abiadura ezartzen du. Txartel guztiek ez dute hau onartzen."
+
+#. i18n: file ifconfigpagebase.ui line 212
+#: rc.cpp:171
+#, no-c-format
+msgid "Auto"
+msgstr "Auto"
+
+#. i18n: file ifconfigpagebase.ui line 217
+#: rc.cpp:174
+#, no-c-format
+msgid "1 Mb/s"
+msgstr "1 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 222
+#: rc.cpp:177
+#, no-c-format
+msgid "2 Mb/s"
+msgstr "2 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 227
+#: rc.cpp:180
+#, no-c-format
+msgid "5.5 Mb/s"
+msgstr "5.5 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 232
+#: rc.cpp:183
+#, no-c-format
+msgid "6 Mb/s"
+msgstr "6 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 237
+#: rc.cpp:186
+#, no-c-format
+msgid "9 Mb/s"
+msgstr "9 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 242
+#: rc.cpp:189
+#, no-c-format
+msgid "11 Mb/s"
+msgstr "11 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 247
+#: rc.cpp:192
+#, no-c-format
+msgid "12 Mb/s"
+msgstr "12 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 252
+#: rc.cpp:195
+#, no-c-format
+msgid "18 Mb/s"
+msgstr "18 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 257
+#: rc.cpp:198
+#, no-c-format
+msgid "24 Mb/s"
+msgstr "24 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 262
+#: rc.cpp:201
+#, no-c-format
+msgid "36 Mb/s"
+msgstr "36 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 267
+#: rc.cpp:204
+#, no-c-format
+msgid "48 Mb/s"
+msgstr "48 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 272
+#: rc.cpp:207
+#, no-c-format
+msgid "54 Mb/s"
+msgstr "54 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 311
+#: rc.cpp:210
+#, no-c-format
+msgid "Operation mode:"
+msgstr "Eragiketa modua:"
+
+#. i18n: file ifconfigpagebase.ui line 314
+#: rc.cpp:213
+#, no-c-format
+msgid ""
+"Operation mode of the card. For standard infrastructure networks, \"Managed\" "
+"is appropriate."
+msgstr ""
+"Txartelaren eragiketa-modua. Azpiegitura estandarreko sareentzat \"Kudeatuta\" "
+"da egokia."
+
+#. i18n: file ifconfigpagebase.ui line 320
+#: rc.cpp:216
+#, no-c-format
+msgid "Ad-Hoc"
+msgstr "Ad-Hoc"
+
+#. i18n: file ifconfigpagebase.ui line 325
+#: rc.cpp:219
+#, no-c-format
+msgid "Managed"
+msgstr "Kudeatuta"
+
+#. i18n: file ifconfigpagebase.ui line 330
+#: rc.cpp:222
+#, no-c-format
+msgid "Repeater"
+msgstr "Errepikatzailea"
+
+#. i18n: file ifconfigpagebase.ui line 335
+#: rc.cpp:225
+#, no-c-format
+msgid "Master"
+msgstr "Maisua"
+
+#. i18n: file ifconfigpagebase.ui line 340
+#: rc.cpp:228
+#, no-c-format
+msgid "Secondary"
+msgstr "Menpekoa"
+
+#. i18n: file ifconfigpagebase.ui line 379
+#: rc.cpp:231
+#, no-c-format
+msgid "Execute script on connect"
+msgstr "Exekutatu script-a konektatzean"
+
+#. i18n: file ifconfigpagebase.ui line 382
+#: rc.cpp:234
+#, no-c-format
+msgid ""
+"Activates a script to perform arbitrary operations after associating with the "
+"network."
+msgstr ""
+"Sarearekin bateratzean exekutatuko den script pertsonalizatu bat aktibatzen du."
+
+#. i18n: file ifconfigpagebase.ui line 417
+#: rc.cpp:237
+#, no-c-format
+msgid "Use encryption"
+msgstr "Erabili enkriptatzea"
+
+#. i18n: file ifconfigpagebase.ui line 420
+#: rc.cpp:240
+#, no-c-format
+msgid "Enables WEP encryption."
+msgstr "WEP enkriptazioa gaitzen du."
+
+#. i18n: file ifconfigpagebase.ui line 434
+#: rc.cpp:246
+#, no-c-format
+msgid "Clicking this button opens the Encryption menu."
+msgstr "Botoi hau klikatzen baduzu Enkriptazioa menua irekiko da."
+
+#. i18n: file mainconfigbase.ui line 24
+#: rc.cpp:249
+#, no-c-format
+msgid "General Settings"
+msgstr "Ezarpen orokorrak"
+
+#. i18n: file mainconfigbase.ui line 35
+#: rc.cpp:252
+#, no-c-format
+msgid "&Activate"
+msgstr "&Aktibatu"
+
+#. i18n: file mainconfigbase.ui line 38
+#: rc.cpp:255
+#, no-c-format
+msgid "Applies the configuration to the interface."
+msgstr "Konfigurazioa interfazeari aplikatzen dio."
+
+#. i18n: file mainconfigbase.ui line 63
+#: rc.cpp:258
+#, no-c-format
+msgid "Number of configurations:"
+msgstr "Konfigurazio kopurua:"
+
+#. i18n: file mainconfigbase.ui line 66
+#: rc.cpp:261
+#, no-c-format
+msgid "Modifies the number of configurations that this tool should provide."
+msgstr ""
+"Tresna honek eskeini beharko lituzkeen konfigurazio kopurua aldatzen du."
+
+#. i18n: file mainconfigbase.ui line 74
+#: rc.cpp:264 rc.cpp:270
+#, no-c-format
+msgid "Selects which of the configurations is to be applied."
+msgstr "Zein konfigurazio aplikatuko den hautatzen du."
+
+#. i18n: file mainconfigbase.ui line 104
+#: rc.cpp:267
+#, no-c-format
+msgid "Configuration to load:"
+msgstr "Kargatzeko konfigurazioa:"
+
+#. i18n: file mainconfigbase.ui line 149
+#: rc.cpp:273
+#, no-c-format
+msgid "Load preset &configuration on startup"
+msgstr "Kargatu aurrezarritako &konfigurazioa abioan"
+
+#. i18n: file mainconfigbase.ui line 152
+#: rc.cpp:276
+#, no-c-format
+msgid ""
+"When this box is checked, your settings are applied when you launch the Control "
+"Center module."
+msgstr ""
+"Hau hautatzen baduzu, Kontrol Gunearen modulua abiatzean zure ezarpenak "
+"aplikatuko dira."
+
+#: wificonfig.cpp:239 wificonfig.cpp:261 wificonfig.cpp:280
+msgid "Unable to autodetect wireless interface."
+msgstr "Ezin izan da kablerik gabeko interfazea autodetektatu."