Second part of prior commit

1 files changed, 1678 insertions, 0 deletions

diff --git a/tde-i18n-ko/messages/tdebase/ksysguard.po b/tde-i18n-ko/messages/tdebase/ksysguard.po
new file mode 100644
index 00000000000..04eb8a62313
--- /dev/null
+++ b/tde-i18n-ko/messages/tdebase/ksysguard.po
@@ -0,0 +1,1678 @@
+# Translation of ksysguard.po to Korean
+# Copyright (C) 2001,2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+# Sae-keun Kim <segni@susekorea.net>, 2001.
+# Choe Hwanjin <hjchoe@hancom.com>, 2003, 2004.
+# Kyuhyong <root@localhost.localdomain>, 2004.
+# Youngbin Park <shrike@nate.com>, 2005.
+# Sung-Jae, Cho <jachin@hanafos.com>, 2005.
+# Park Shinjo <peremen@gmail.com>, 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: ksysguard\n"
+"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
+"POT-Creation-Date: 2008-07-08 01:18+0200\n"
+"PO-Revision-Date: 2008-01-30 20:56+0900\n"
+"Last-Translator: Park Shinjo <peremen@gmail.com>\n"
+"Language-Team: Korean <jachin@hanafos.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "파일 %1을(를) 열 수 없습니다."
+
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "파일 %1은(는) 올바른 XML을 포함하지 않습니다."
+
+#: WorkSheet.cc:109
+msgid ""
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
+msgstr ""
+"파일 %1에는 올바른 워크시트가 정의되어 있지 않습니다. 문서 형식은 'KSysGuardWorkSheet' 형식을 가져야 합니다."
+
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "파일 %1의 워크시트 크기가 잘못되었습니다."
+
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "파일 %1을(를) 저장할 수 없습니다"
+
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "클립보드에 올바른 디스플레이 설명이 없습니다."
+
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "'%1'에 연결할 수 없습니다."
+
+#: KSysGuardApplet.cc:209 WorkSheet.cc:331
+msgid "Select Display Type"
+msgstr "디스플레이 종류 선택"
+
+#: KSysGuardApplet.cc:210 WorkSheet.cc:332
+msgid "&Signal Plotter"
+msgstr "신호 플로터(&S)"
+
+#: KSysGuardApplet.cc:211 WorkSheet.cc:333
+msgid "&Multimeter"
+msgstr "멀티미터(&M)"
+
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "막대 그래프(&B)"
+
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "센서 로그기록기(&E)"
+
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"%1에서의 메시지:\n"
+"%2"
+
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "타이머 설정"
+
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "워크시트의 새로 고침 주기 사용하기"
+
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "새로 고침 주기:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
+#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#: rc.cpp:21
+#, no-c-format
+msgid " sec"
+msgstr " 초"
+
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr "시트에 있는 모든 디스플레이는 다음 시간마다 갱신됩니다."
+
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "호스트 연결"
+
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "호스트:"
+
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "연결하려는 호스트를 입력하십시오."
+
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "연결 방식"
+
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
+
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr "원격 호스트에 안전한 셸을 사용해서 연결하려면 선택하십시오."
+
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
+
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr "원격 호스트에 원격 셸을 사용해서 연결하려면 선택하십시오."
+
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "데몬"
+
+#: ksgrd/HostConnector.cc:77
+msgid ""
+"Select this if you want to connect to a ksysguard daemon that is running on the "
+"machine you want to connect to, and is listening for client requests."
+msgstr "연결하려는 장치에서 실행하고 있는 ksysguard 데몬에 연결하려면 선택하십시오."
+
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "사용자 정의 명령"
+
+#: ksgrd/HostConnector.cc:81
+msgid ""
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
+msgstr "원격 호스트에서 ksysguardd를 시작하기 위해서 아래에 입력한 명령을 사용하려면 선택하십시오."
+
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "포트:"
+
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr "ksysgard 데몬이 연결을 받을 포트 번호를 입력하십시오."
+
+#: ksgrd/HostConnector.cc:93
+msgid "e.g.  3112"
+msgstr "예.  3112"
+
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "명령:"
+
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr "감시하려고 하는 호스트에서 ksysguardd를 실행하는 명령을 입력하십시오."
+
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "예. ssh -l root remote.host.org ksysguardd"
+
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "전역 스타일 설정"
+
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "표시 스타일"
+
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "첫 번째 글자색:"
+
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "두 번째 글자색:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
+#: ksgrd/StyleSettings.cc:61 rc.cpp:126
+#, no-c-format
+msgid "Alarm color:"
+msgstr "경고 색상:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
+#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
+#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
+#, no-c-format
+msgid "Background color:"
+msgstr "배경색:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "글꼴 크기:"
+
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "센서 색상"
+
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "색상 설정..."
+
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "색상 %1"
+
+#. i18n: file SystemLoad.sgrd line 5
+#: ksgrd/SensorManager.cc:50 rc.cpp:173
+msgid "CPU Load"
+msgstr "CPU 사용량"
+
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "대기 상태 부하"
+
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
+#: ksysguard.cc:171
+msgid "System Load"
+msgstr "시스템 사용량"
+
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "Nice 사용량"
+
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "사용자 사용량"
+
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "메모리"
+
+#. i18n: file SystemLoad.sgrd line 13
+#: ksgrd/SensorManager.cc:56 rc.cpp:177
+msgid "Physical Memory"
+msgstr "물리적 메모리"
+
+#. i18n: file SystemLoad.sgrd line 21
+#: ksgrd/SensorManager.cc:57 rc.cpp:179
+msgid "Swap Memory"
+msgstr "스왑 메모리"
+
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "캐시 메모리"
+
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "버퍼 메모리"
+
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "사용한 메모리"
+
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "프로그램 메모리"
+
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "남은 메모리"
+
+#: ksgrd/SensorManager.cc:63
+msgid "Process Count"
+msgstr "프로세스 개수"
+
+#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
+msgid "Process Controller"
+msgstr "프로세스 제어기"
+
+#: ksgrd/SensorManager.cc:65
+msgid "Disk Throughput"
+msgstr "디스크 처리량"
+
+#: ksgrd/SensorManager.cc:66
+msgid ""
+"_: CPU Load\n"
+"Load"
+msgstr "CPU 사용량"
+
+#: ksgrd/SensorManager.cc:67
+msgid "Total Accesses"
+msgstr "전체 접근"
+
+#: ksgrd/SensorManager.cc:68
+msgid "Read Accesses"
+msgstr "읽기 접근"
+
+#: ksgrd/SensorManager.cc:69
+msgid "Write Accesses"
+msgstr "쓰기 접근"
+
+#: ksgrd/SensorManager.cc:70
+msgid "Read Data"
+msgstr "읽은 데이터"
+
+#: ksgrd/SensorManager.cc:71
+msgid "Write Data"
+msgstr "쓴 데이터"
+
+#: ksgrd/SensorManager.cc:72
+msgid "Pages In"
+msgstr "페이지 입력"
+
+#: ksgrd/SensorManager.cc:73
+msgid "Pages Out"
+msgstr "페이지 출력"
+
+#: ksgrd/SensorManager.cc:74
+msgid "Context Switches"
+msgstr "컨텍스트 전환"
+
+#: ksgrd/SensorManager.cc:75
+msgid "Network"
+msgstr "네트워크"
+
+#: ksgrd/SensorManager.cc:76
+msgid "Interfaces"
+msgstr "인터페이스"
+
+#: ksgrd/SensorManager.cc:77
+msgid "Receiver"
+msgstr "수신자"
+
+#: ksgrd/SensorManager.cc:78
+msgid "Transmitter"
+msgstr "발신자"
+
+#: ksgrd/SensorManager.cc:79
+msgid "Data"
+msgstr "데이터"
+
+#: ksgrd/SensorManager.cc:80
+msgid "Compressed Packets"
+msgstr "압축된 패킷"
+
+#: ksgrd/SensorManager.cc:81
+msgid "Dropped Packets"
+msgstr "손실된 패킷"
+
+#: ksgrd/SensorManager.cc:82
+msgid "Errors"
+msgstr "오류"
+
+#: ksgrd/SensorManager.cc:83
+msgid "FIFO Overruns"
+msgstr "FIFO 과부하"
+
+#: ksgrd/SensorManager.cc:84
+msgid "Frame Errors"
+msgstr "프레임 오류"
+
+#: ksgrd/SensorManager.cc:85
+msgid "Multicast"
+msgstr "멀티캐스트"
+
+#: ksgrd/SensorManager.cc:86
+msgid "Packets"
+msgstr "패킷"
+
+#: ksgrd/SensorManager.cc:87
+msgid "Carrier"
+msgstr "전달자"
+
+#: ksgrd/SensorManager.cc:88
+msgid "Collisions"
+msgstr "충돌"
+
+#: ksgrd/SensorManager.cc:89
+msgid "Sockets"
+msgstr "소켓"
+
+#: ksgrd/SensorManager.cc:90
+msgid "Total Number"
+msgstr "총 개수"
+
+#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
+msgid "Table"
+msgstr "표"
+
+#: ksgrd/SensorManager.cc:92
+msgid "Advanced Power Management"
+msgstr "고급 전원 관리(APM)"
+
+#: ksgrd/SensorManager.cc:93
+msgid "ACPI"
+msgstr "ACPI"
+
+#: ksgrd/SensorManager.cc:94
+msgid "Thermal Zone"
+msgstr "열 영역"
+
+#: ksgrd/SensorManager.cc:95
+msgid "Temperature"
+msgstr "온도"
+
+#: ksgrd/SensorManager.cc:96
+msgid "Fan"
+msgstr "팬"
+
+#: ksgrd/SensorManager.cc:97
+msgid "State"
+msgstr "상태"
+
+#: ksgrd/SensorManager.cc:98
+msgid "Battery"
+msgstr "배터리"
+
+#: ksgrd/SensorManager.cc:99
+msgid "Battery Charge"
+msgstr "배터리 충전률"
+
+#: ksgrd/SensorManager.cc:100
+msgid "Battery Usage"
+msgstr "배터리 사용량"
+
+#: ksgrd/SensorManager.cc:101
+msgid "Remaining Time"
+msgstr "남은 시간"
+
+#: ksgrd/SensorManager.cc:102
+msgid "Interrupts"
+msgstr "인터럽트"
+
+#. i18n: file SystemLoad.sgrd line 10
+#: ksgrd/SensorManager.cc:103 rc.cpp:175
+msgid "Load Average (1 min)"
+msgstr "평균 부하 (1분)"
+
+#: ksgrd/SensorManager.cc:104
+msgid "Load Average (5 min)"
+msgstr "평균 부하 (5분)"
+
+#: ksgrd/SensorManager.cc:105
+msgid "Load Average (15 min)"
+msgstr "평균 부하 (15분)"
+
+#: ksgrd/SensorManager.cc:106
+msgid "Clock Frequency"
+msgstr "클럭 주파수"
+
+#: ksgrd/SensorManager.cc:107
+msgid "Hardware Sensors"
+msgstr "하드웨어 센서"
+
+#: ksgrd/SensorManager.cc:108
+msgid "Partition Usage"
+msgstr "파티션 사용량"
+
+#: ksgrd/SensorManager.cc:109
+msgid "Used Space"
+msgstr "사용한 공간"
+
+#: ksgrd/SensorManager.cc:110
+msgid "Free Space"
+msgstr "남은 공간"
+
+#: ksgrd/SensorManager.cc:111
+msgid "Fill Level"
+msgstr "채우기 레벨"
+
+#: ksgrd/SensorManager.cc:115
+#, c-format
+msgid "CPU%1"
+msgstr "CPU %1"
+
+#: ksgrd/SensorManager.cc:117
+#, c-format
+msgid "Disk%1"
+msgstr "디스크 %1"
+
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Fan%1"
+msgstr "팬 %1"
+
+#: ksgrd/SensorManager.cc:124
+#, c-format
+msgid "Temperature%1"
+msgstr "온도계 %1"
+
+#: ksgrd/SensorManager.cc:127
+msgid "Total"
+msgstr "전체"
+
+#: ksgrd/SensorManager.cc:133
+#, c-format
+msgid "Int%1"
+msgstr "정수 %1"
+
+#: ksgrd/SensorManager.cc:140
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/초"
+
+#: ksgrd/SensorManager.cc:141
+msgid "kBytes"
+msgstr "kB"
+
+#: ksgrd/SensorManager.cc:142
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "분"
+
+#: ksgrd/SensorManager.cc:143
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
+
+#: ksgrd/SensorManager.cc:146
+msgid "Integer Value"
+msgstr "정수 값"
+
+#: ksgrd/SensorManager.cc:147
+msgid "Floating Point Value"
+msgstr "실수 값"
+
+#: ksgrd/SensorManager.cc:289
+msgid "Connection to %1 has been lost."
+msgstr "%1과(와)의 연결이 끊어졌습니다."
+
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "%1과(와)의 연결이 거부되었습니다"
+
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "호스트 %1을(를) 찾을 수 없습니다"
+
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "호스트 %1의 시간 초과"
+
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "호스트 %1의 네트워크 실패"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Park Shinjo"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "peremen@gmail.com"
+
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"이것은 작업 공간이며 워크시트를 포함합니다. 파일->새로 만들기 메뉴를 눌러서 새로운 워크시트를 만든 다음 센서를 끌어다 놓아서 추가하십시오."
+
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "프로세스 목록"
+
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "시트 %1"
+
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"워크시트 '%1'의 데이터가 저장되지 않았습니다.\n"
+"워크시트를 저장하시겠습니까?"
+
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|센서 파일"
+
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "가져올 워크시트 선택"
+
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "저장할 워크시트가 없습니다."
+
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "현재 워크시트 다른 이름으로 저장하기"
+
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "삭제할 워크시트가 없습니다."
+
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "ProcessTable.sgrd 파일을 찾을 수 없습니다."
+
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "시스템 관리 설정"
+
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "표시 개수:"
+
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "크기 비율:"
+
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
+
+#: SensorDisplayLib/ProcessList.cc:110
+msgid ""
+"_: process status\n"
+"running"
+msgstr "실행 중"
+
+#: SensorDisplayLib/ProcessList.cc:112
+msgid ""
+"_: process status\n"
+"sleeping"
+msgstr "수면 중"
+
+#: SensorDisplayLib/ProcessList.cc:114
+msgid ""
+"_: process status\n"
+"disk sleep"
+msgstr "디스크 수면 중"
+
+#: SensorDisplayLib/ProcessList.cc:115
+msgid ""
+"_: process status\n"
+"zombie"
+msgstr "좀비"
+
+#: SensorDisplayLib/ProcessList.cc:117
+msgid ""
+"_: process status\n"
+"stopped"
+msgstr "정지됨"
+
+#: SensorDisplayLib/ProcessList.cc:118
+msgid ""
+"_: process status\n"
+"paging"
+msgstr "페이징"
+
+#: SensorDisplayLib/ProcessList.cc:119
+msgid ""
+"_: process status\n"
+"idle"
+msgstr "휴식 중"
+
+#: SensorDisplayLib/ProcessList.cc:250
+msgid "Remove Column"
+msgstr "열 삭제"
+
+#: SensorDisplayLib/ProcessList.cc:251
+msgid "Add Column"
+msgstr "열 추가"
+
+#: SensorDisplayLib/ProcessList.cc:252
+msgid "Help on Column"
+msgstr "열 도움말"
+
+#: SensorDisplayLib/ProcessController.cc:62
+#: SensorDisplayLib/ProcessList.cc:771
+msgid "Nice"
+msgstr "Nice"
+
+#: SensorDisplayLib/ProcessList.cc:776
+msgid "Hide Column"
+msgstr "열 숨기기"
+
+#: SensorDisplayLib/ProcessList.cc:782
+msgid "Show Column"
+msgstr "열 보이기"
+
+#: SensorDisplayLib/ProcessList.cc:786
+msgid "Select All Processes"
+msgstr "모든 프로세스 선택"
+
+#: SensorDisplayLib/ProcessList.cc:787
+msgid "Unselect All Processes"
+msgstr "모든 프로세스 선택 해제"
+
+#: SensorDisplayLib/ProcessList.cc:793
+msgid "Select All Child Processes"
+msgstr "모든 자식 프로세스 선택"
+
+#: SensorDisplayLib/ProcessList.cc:794
+msgid "Unselect All Child Processes"
+msgstr "모든 자식 프로세스 선택 해제"
+
+#: SensorDisplayLib/ProcessList.cc:796
+msgid "SIGABRT"
+msgstr "SIGABRT"
+
+#: SensorDisplayLib/ProcessList.cc:797
+msgid "SIGALRM"
+msgstr "SIGALRM"
+
+#: SensorDisplayLib/ProcessList.cc:798
+msgid "SIGCHLD"
+msgstr "SIGCHLD"
+
+#: SensorDisplayLib/ProcessList.cc:799
+msgid "SIGCONT"
+msgstr "SIGCONT"
+
+#: SensorDisplayLib/ProcessList.cc:800
+msgid "SIGFPE"
+msgstr "SIGFPE"
+
+#: SensorDisplayLib/ProcessList.cc:801
+msgid "SIGHUP"
+msgstr "SIGHUP"
+
+#: SensorDisplayLib/ProcessList.cc:802
+msgid "SIGILL"
+msgstr "SIGILL"
+
+#: SensorDisplayLib/ProcessList.cc:803
+msgid "SIGINT"
+msgstr "SIGINT"
+
+#: SensorDisplayLib/ProcessList.cc:804
+msgid "SIGKILL"
+msgstr "SIGKILL"
+
+#: SensorDisplayLib/ProcessList.cc:805
+msgid "SIGPIPE"
+msgstr "SIGPIPE"
+
+#: SensorDisplayLib/ProcessList.cc:806
+msgid "SIGQUIT"
+msgstr "SIGQUIT"
+
+#: SensorDisplayLib/ProcessList.cc:807
+msgid "SIGSEGV"
+msgstr "SIGSEGV"
+
+#: SensorDisplayLib/ProcessList.cc:808
+msgid "SIGSTOP"
+msgstr "SIGSTOP"
+
+#: SensorDisplayLib/ProcessList.cc:809
+msgid "SIGTERM"
+msgstr "SIGTERM"
+
+#: SensorDisplayLib/ProcessList.cc:810
+msgid "SIGTSTP"
+msgstr "SIGTSTP"
+
+#: SensorDisplayLib/ProcessList.cc:811
+msgid "SIGTTIN"
+msgstr "SIGTTIN"
+
+#: SensorDisplayLib/ProcessList.cc:812
+msgid "SIGTTOU"
+msgstr "SIGTTOU"
+
+#: SensorDisplayLib/ProcessList.cc:813
+msgid "SIGUSR1"
+msgstr "SIGUSR1"
+
+#: SensorDisplayLib/ProcessList.cc:814
+msgid "SIGUSR2"
+msgstr "SIGUSR2"
+
+#: SensorDisplayLib/ProcessList.cc:817
+msgid "Send Signal"
+msgstr "신호 보내기"
+
+#: SensorDisplayLib/ProcessList.cc:825
+msgid "Renice Process..."
+msgstr "프로세스 nice 값 조정..."
+
+#: SensorDisplayLib/ProcessList.cc:873
+msgid ""
+"_n: Do you really want to send signal %1 to the selected process?\n"
+"Do you really want to send signal %1 to the %n selected processes?"
+msgstr "%n개의 선택한 프로세스에 신호 %1을(를) 보내시겠습니까?"
+
+#: SensorDisplayLib/ProcessList.cc:877
+msgid "Send"
+msgstr "보내기"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:43
+msgid "Edit BarGraph Preferences"
+msgstr "막대 그래프 속성 편집"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:47
+msgid "Range"
+msgstr "범위"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
+#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
+#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
+#, no-c-format
+msgid "Title"
+msgstr "제목"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
+#: SensorDisplayLib/DancingBarsSettings.cc:54
+#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
+#, no-c-format
+msgid "Enter the title of the display here."
+msgstr "표시할 제목을 입력하십시오."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:59
+msgid "Display Range"
+msgstr "표시 범위"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:63
+#: SensorDisplayLib/FancyPlotterSettings.cc:89
+msgid "Minimum value:"
+msgstr "최소 값:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:67
+#: SensorDisplayLib/FancyPlotterSettings.cc:95
+msgid ""
+"Enter the minimum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr "표시할 최소값을 입력하십시오. 두 값이 모두 0이면, 범위가 자동으로 지정됩니다."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:71
+#: SensorDisplayLib/FancyPlotterSettings.cc:99
+msgid "Maximum value:"
+msgstr "최대 값:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:75
+#: SensorDisplayLib/FancyPlotterSettings.cc:105
+msgid ""
+"Enter the maximum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr "표시할 최대값을 입력하십시오. 두 값이 모두 0이면, 범위가 자동으로 지정됩니다."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
+#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
+#, no-c-format
+msgid "Alarms"
+msgstr "알람"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
+#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
+#, no-c-format
+msgid "Alarm for Minimum Value"
+msgstr "최소값 알람"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:91
+#: SensorDisplayLib/DancingBarsSettings.cc:109
+msgid "Enable alarm"
+msgstr "알람 사용"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
+#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
+#, no-c-format
+msgid "Enable the minimum value alarm."
+msgstr "최소값 알람 사용"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
+#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
+#, no-c-format
+msgid "Lower limit:"
+msgstr "최소 한계"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
+#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
+#, no-c-format
+msgid "Alarm for Maximum Value"
+msgstr "최대값 알람"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
+#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
+#, no-c-format
+msgid "Enable the maximum value alarm."
+msgstr "최대값 알람 사용"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
+#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
+#, no-c-format
+msgid "Upper limit:"
+msgstr "최대 한계"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:126
+msgid "Look"
+msgstr "보기"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:129
+msgid "Normal bar color:"
+msgstr "일반 막대 색상:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:136
+msgid "Out-of-range color:"
+msgstr "범위-초과 색상:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:154
+msgid ""
+"This determines the size of the font used to print a label underneath the bars. "
+"Bars are automatically suppressed if text becomes too large, so it is advisable "
+"to use a small font size here."
+msgstr ""
+"막대 밑에 들어갈 이름에 사용할 글꼴의 크기를 결정합니다. 들어갈 말이 너무 크게되면 자동적으로 알맞는 작은크기의 글꼴로 제한이 됩니다."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:161
+#: SensorDisplayLib/FancyPlotterSettings.cc:224
+msgid "Sensors"
+msgstr "센서"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:166
+#: SensorDisplayLib/FancyPlotterSettings.cc:231
+msgid "Host"
+msgstr "호스트"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:167
+#: SensorDisplayLib/FancyPlotterSettings.cc:232
+msgid "Sensor"
+msgstr "센서"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:168
+msgid "Label"
+msgstr "이름표"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:169
+#: SensorDisplayLib/FancyPlotterSettings.cc:233
+msgid "Unit"
+msgstr "단위"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "상태"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:174
+msgid "Edit..."
+msgstr "편집..."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:176
+msgid "Push this button to configure the label."
+msgstr "레이블을 설정하려면 이 단추를 누르십시오."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:181
+#: SensorDisplayLib/FancyPlotterSettings.cc:249
+msgid "Push this button to delete the sensor."
+msgstr "센서를 지우려면 이 단추를 누르십시오."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:356
+msgid "Label of Bar Graph"
+msgstr "막대 그래프의 레이블"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:357
+msgid "Enter new label:"
+msgstr "새 레이블 입력:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:47
+msgid "Signal Plotter Settings"
+msgstr "신호 플로터 설정"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:57
+msgid "Style"
+msgstr "스타일"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:60
+msgid "Title:"
+msgstr "제목:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:69
+msgid "Graph Drawing Style"
+msgstr "그래프 그리기 스타일"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:71
+msgid "Basic polygons"
+msgstr "기본 다각형"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:73
+msgid "Original - single line per data point"
+msgstr "전통적 - 데이터 점 당 하나의 선"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:78
+msgid "Scales"
+msgstr "눈금"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:81
+msgid "Vertical Scale"
+msgstr "세로 눈금"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:85
+msgid "Automatic range detection"
+msgstr "범위 자동 검색"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:86
+msgid ""
+"Check this box if you want the display range to adapt dynamically to the "
+"currently displayed values; if you do not check this, you have to specify the "
+"range you want in the fields below."
+msgstr ""
+"표시할수 있는 범위내에서 현재 표시된 값을 동적으로 적용하여 보여줄려면 이 박스를 체크하세요. 만약 이박스를 체크하지 않으면, 원하는 필드 "
+"아래에 특별한 범위를 지정해야만 합니다."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:111
+msgid "Horizontal Scale"
+msgstr "가로 눈금"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:120
+msgid "pixel(s) per time period"
+msgstr "주기당 픽셀"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:126
+msgid "Grid"
+msgstr "격자 모양"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:129
+msgid "Lines"
+msgstr "선"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:133
+msgid "Vertical lines"
+msgstr "세로선"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:134
+msgid "Check this to activate the vertical lines if display is large enough."
+msgstr "화면 크기가 충분하다면, 이것을 클릭하여 가로선을 활성화 하십시오."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:137
+msgid "Distance:"
+msgstr "간격:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:143
+msgid "Enter the distance between two vertical lines here."
+msgstr "두 세로선 사이의 간격을 입력하십시오."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:147
+msgid "Vertical lines scroll"
+msgstr "세로선 스크롤"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:150
+msgid "Horizontal lines"
+msgstr "가로선"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:151
+msgid "Check this to enable horizontal lines if display is large enough."
+msgstr "화면 크기가 충분하다면, 이것을 클릭하여 가로선을 사용하십시오."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:154
+msgid "Count:"
+msgstr "횟수:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:160
+msgid "Enter the number of horizontal lines here."
+msgstr "가로선의 개수를 입력하십시오."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
+#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
+#, no-c-format
+msgid "Text"
+msgstr "텍스트"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:172
+msgid "Labels"
+msgstr "레이블"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:173
+msgid ""
+"Check this box if horizontal lines should be decorated with the values they "
+"mark."
+msgstr "가로선 옆에 값을 함께 표시합니다."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:185
+msgid "Top bar"
+msgstr "최상위 바"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:186
+msgid ""
+"Check this to active the display title bar. This is probably only useful for "
+"applet displays. The bar is only visible if the display is large enough."
+msgstr ""
+"제목줄 표시를 활성화 할려면 이것을 선택하세요. 이는 applet 표시하는것에만 유용합니다. 이 제목줄은 화면이 충분히 커야만 보여질 "
+"것입니다."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
+#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
+#: rc.cpp:117 rc.cpp:138
+#, no-c-format
+msgid "Colors"
+msgstr "색상"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:196
+msgid "Vertical lines:"
+msgstr "세로선:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:203
+msgid "Horizontal lines:"
+msgstr "가로선:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:210
+msgid "Background:"
+msgstr "배경:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:242
+msgid "Set Color..."
+msgstr "색상 설정..."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:244
+msgid "Push this button to configure the color of the sensor in the diagram."
+msgstr "그래프의 색상을 변경합니다."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:252
+msgid "Move Up"
+msgstr "위로 이동"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:256
+msgid "Move Down"
+msgstr "아래로 이동"
+
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "센서 로그기록기"
+
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "시스템 가드 실행(&S)"
+
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "속성(&P)"
+
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "화면 지우기(&R)"
+
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "새로 고침 주기 설정(&S)..."
+
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "업데이트 다시 시작(&C)"
+
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "업데이트 일시 정지(&A)"
+
+#: SensorDisplayLib/SensorDisplay.cc:240
+msgid ""
+"<qt>"
+"<p>This is a sensor display. To customize a sensor display click and hold the "
+"right mouse button on either the frame or the display box and select the <i>"
+"Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
+msgstr ""
+"<qt>"
+"<p>이것은 센서 디스플레이입니다. 센서 디스플레이를 설정하려면 여기에서 마우스 오른쪽 단추를 누르고 팝업 메뉴의 <i>속성</i>"
+"을 선택하십시오. 워크시트에서 디스플레이를 지우려면 <i>삭제</i>를 선택하십시오.</p>%1</qt>"
+
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "로그 작성"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
+#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
+#, no-c-format
+msgid "Timer Interval"
+msgstr "타이머 간격"
+
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "센서 이름"
+
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "호스트 이름"
+
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "로그 파일"
+
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "센서 삭제(&R)"
+
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "센서 편집(&E)..."
+
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "로그 작성 중지하기(&O)"
+
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "로그 작성 시작하기(&T)"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
+#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
+#, no-c-format
+msgid "Foreground color:"
+msgstr "글자색:"
+
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "멀티미터 설정"
+
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "목록 보기 설정"
+
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "프로세스 nice 값 설정"
+
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "센서 로그 기록기 설정"
+
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "여기에 센서를 끌어 놓으십시오"
+
+#: SensorDisplayLib/DummyDisplay.cc:38
+msgid ""
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor the "
+"values of the sensor over time."
+msgstr ""
+"이것은 워크시트의 빈 공간입니다. 센서 탐색기에서 이 곳에 센서를 끌어다 놓으십시오. 일정한 시간마다 센서의 값을 관찰하기 위한 디스플레이가 "
+"나타날 것입니다."
+
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "이름"
+
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
+
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
+
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
+
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
+
+#: SensorDisplayLib/ProcessController.cc:60
+#, c-format
+msgid "User%"
+msgstr "사용자%"
+
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "시스템%"
+
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "VmSize"
+
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "VmRss"
+
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "로그인"
+
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "명령"
+
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "모든 프로세스"
+
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "시스템 프로세스"
+
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "사용자 프로세스"
+
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "소유한 프로세스"
+
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "트리(&T)"
+
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "새로 고침(&R)"
+
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "죽이기(&K)"
+
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1: 실행 중인 프로세스"
+
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "프로세스를 먼저 선택해야 합니다."
+
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
+msgid ""
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr "%n개의 선택한 프로세스를 죽이시겠습니까?"
+
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "프로세스 죽이기"
+
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "죽이기"
+
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "다시 묻지 않기"
+
+#: SensorDisplayLib/ProcessController.cc:344
+#, c-format
+msgid "Error while attempting to kill process %1."
+msgstr "프로세스 %1을(를) 죽이는 중 오류가 발생했습니다."
+
+#: SensorDisplayLib/ProcessController.cc:349
+#, c-format
+msgid "Insufficient permissions to kill process %1."
+msgstr "프로세스 %1을(를) 죽일 수 있는 권한이 없습니다."
+
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "프로세스 %1이(가) 이미 사라졌습니다."
+
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "잘못된 신호."
+
+#: SensorDisplayLib/ProcessController.cc:379
+#, c-format
+msgid "Error while attempting to renice process %1."
+msgstr "프로세스 %1의 nice 값을 조정하는 중 오류가 발생했습니다."
+
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "프로세스 %1의 nice 값을 조정할 수 있는 권한이 없습니다."
+
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "인자가 잘못되었습니다."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
+#: rc.cpp:27 rc.cpp:78
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "알람 사용하기(&E)"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
+#: rc.cpp:39 rc.cpp:66
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "알람 사용하기(&N)"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
+#: rc.cpp:54
+#, no-c-format
+msgid "&Show unit"
+msgstr "단위 보이기(&S)"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
+#: rc.cpp:57
+#, no-c-format
+msgid "Enable this to append the unit to the title of the display."
+msgstr "디스플레이의 제목에 단위를 표시하려면 선택하십시오."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
+#: rc.cpp:90
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "보통 숫자 색상:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
+#: rc.cpp:93
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "경고 숫자 색상:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
+#: rc.cpp:105 rc.cpp:120
+#, no-c-format
+msgid "Text color:"
+msgstr "텍스트 색상:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
+#: rc.cpp:108
+#, no-c-format
+msgid "Grid color:"
+msgstr "격자 색상:"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
+#: rc.cpp:129
+#, no-c-format
+msgid "Log File Settings"
+msgstr "로그 파일 설정"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
+#: rc.cpp:150
+#, no-c-format
+msgid "Select Font..."
+msgstr "글꼴 설정..."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
+#: rc.cpp:153
+#, no-c-format
+msgid "Filter"
+msgstr "필터"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
+#: rc.cpp:156
+#, no-c-format
+msgid "&Add"
+msgstr "추가(&A)"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
+#: rc.cpp:162
+#, no-c-format
+msgid "&Change"
+msgstr "변경(&C)"
+
+#. i18n: file KSysGuardApplet.xml line 5
+#: rc.cpp:181
+msgid "CPU"
+msgstr "CPU"
+
+#. i18n: file KSysGuardApplet.xml line 10
+#: rc.cpp:183
+msgid "Mem"
+msgstr "메모리"
+
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "워크시트 속성"
+
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "줄:"
+
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "칸:"
+
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "시트의 줄 개수를 입력하십시오."
+
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "시트의 칸 개수를 입력하십시오."
+
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "워크시트의 제목을 입력하십시오."
+
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "움직이는 바(&D)"
+
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+msgid ""
+"The KSysGuard applet does not support displaying of this type of sensor. Please "
+"choose another sensor."
+msgstr "KSysGuard 애플릿에서는 이 형태의 센서를 표시할 수 없습니다. 다른 센서를 선택하십시오."
+
+#: KSysGuardApplet.cc:334
+msgid ""
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
+msgstr "파일 %1에는 올바른 애플릿 정의가 들어있는 것 같지 않습니다. 문서 형식은 'KSysGuardApplet'이어야 합니다."
+
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the KDE System Guard into this cell."
+msgstr "KDE 시스템 모니터에서 이 공간으로 센서를 끌어다 놓으십시오."
+
+#: SensorBrowser.cc:77
+msgid "Sensor Browser"
+msgstr "센서 탐색기"
+
+#: SensorBrowser.cc:78
+msgid "Sensor Type"
+msgstr "센서 종류"
+
+#: SensorBrowser.cc:81
+msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+msgstr "워크시트나 패널 애플릿으로 센서를 끌어다 놓으십시오."
+
+#: SensorBrowser.cc:88
+msgid ""
+"The sensor browser lists the connected hosts and the sensors that they provide. "
+"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
+"display will appear that visualizes the values provided by the sensor. Some "
+"sensor displays can display values of multiple sensors. Simply drag other "
+"sensors on to the display to add more sensors."
+msgstr ""
+"센서 탐색기는 연결된 호스트와 호스트의 센서 목록을 보여 줍니다. 워크시트나 패널의 애플릿에 센서를 끌어다 놓으십시오. 센서의 값을 보여 주는 "
+"디스플레이가 나타납니다. 몇몇 센서 디스플레이들은 한 개 이상의 센서의 값을 보여 줍니다. 디스플레이에 센서를 끌어다 놓으면 센서를 더 추가할 "
+"수 있습니다."
+
+#: SensorBrowser.cc:148
+msgid "Drag sensors to empty fields in a worksheet."
+msgstr "워크시트의 비어 있는 필드로 센서를 끌어다 놓으십시오."
+
+#: ksysguard.cc:64
+msgid "KDE system guard"
+msgstr "KDE 시스템 모니터"
+
+#: ksysguard.cc:74 ksysguard.cc:556
+msgid "KDE System Guard"
+msgstr "KDE 시스템 모니터"
+
+#: ksysguard.cc:100
+msgid "88888 Processes"
+msgstr "프로세스 88888개"
+
+#: ksysguard.cc:101
+msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+msgstr "메모리: 88888888888 kB 사용됨, 88888888888 kB 남음"
+
+#: ksysguard.cc:103
+msgid "Swap: 888888888 kB used, 888888888 kB free"
+msgstr "스왑: 888888888 kB 사용됨, 888888888 kB 남음"
+
+#: ksysguard.cc:108
+msgid "&New Worksheet..."
+msgstr "새 워크시트(&N)..."
+
+#: ksysguard.cc:111
+msgid "Import Worksheet..."
+msgstr "워크시트 가져오기..."
+
+#: ksysguard.cc:114
+msgid "&Import Recent Worksheet"
+msgstr "최근 워크시트 가져오기(&I)..."
+
+#: ksysguard.cc:117
+msgid "&Remove Worksheet"
+msgstr "워크시트 지우기(&R)"
+
+#: ksysguard.cc:120
+msgid "&Export Worksheet..."
+msgstr "워크시트 내보내기(&E)..."
+
+#: ksysguard.cc:125
+msgid "C&onnect Host..."
+msgstr "호스트에 연결하기(&O)..."
+
+#: ksysguard.cc:127
+msgid "D&isconnect Host"
+msgstr "호스트 연결 끊기(&I)"
+
+#: ksysguard.cc:133
+msgid "&Worksheet Properties"
+msgstr "워크시트 속성(&W)"
+
+#: ksysguard.cc:136
+msgid "Load Standard Sheets"
+msgstr "표준 시트 불러오기"
+
+#: ksysguard.cc:140
+msgid "Configure &Style..."
+msgstr "스타일 설정(&S)..."
+
+#: ksysguard.cc:157
+msgid "Do you really want to restore the default worksheets?"
+msgstr "기본 워크시트를 복원하시겠습니까?"
+
+#: ksysguard.cc:158
+msgid "Reset All Worksheets"
+msgstr "모든 워크시트 초기화"
+
+#: ksysguard.cc:159
+msgid "Reset"
+msgstr "초기화"
+
+#: ksysguard.cc:436
+#, c-format
+msgid ""
+"_n: 1 Process\n"
+"%n Processes"
+msgstr "프로세스 %n개"
+
+#: ksysguard.cc:446
+msgid "Memory: %1 %2 used, %3 %4 free"
+msgstr "메모리: %1 %2 사용됨, %3 %4 남음"
+
+#: ksysguard.cc:504
+msgid "No swap space available"
+msgstr "사용 가능한 스왑 없음"
+
+#: ksysguard.cc:506
+msgid "Swap: %1 %2 used, %3 %4 free"
+msgstr "스왑: %1 %2 사용됨, %3 %4 남음"
+
+#: ksysguard.cc:515
+msgid "Show only process list of local host"
+msgstr "로컬호스트의 프로세스 목록만 보이기"
+
+#: ksysguard.cc:516
+msgid "Optional worksheet files to load"
+msgstr "불러올 추가 워크시트 파일"
+
+#: ksysguard.cc:558
+msgid "(c) 1996-2002 The KSysGuard Developers"
+msgstr "(c) 1996-2002 KDE 시스템 모니터 개발자"
+
+#: ksysguard.cc:566
+msgid ""
+"Solaris Support\n"
+"Parts derived (by permission) from the sunos5\n"
+"module of William LeFebvre's \"top\" utility."
+msgstr ""
+"솔라리스 지원\n"
+"William LeFebvre의 \"top\" 유틸리티의 sunos5\n"
+"모듈의 일부분 사용."