Initial import of extracted KDE i18n tarballs

1 files changed, 1718 insertions, 0 deletions

diff --git a/tde-i18n-nb/messages/kdebase/ksysguard.po b/tde-i18n-nb/messages/kdebase/ksysguard.po
new file mode 100644
index 00000000000..84c342b4e1d
--- /dev/null
+++ b/tde-i18n-nb/messages/kdebase/ksysguard.po
@@ -0,0 +1,1718 @@
+# translation of ksysguard.po to Norwegian Bokmål
+# Norwegian translation.
+# Copyright (C) 1999-2000 Hans Petter Bieker.
+#
+# Hans Petter Bieker <bieker@kde.org>, 1998.
+# Knut Yrvin <knuty@skolelinux.no>, 2002, 2005.
+# Axel Bojer <axelb@skolelinux.no>, 2003--2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: ksysguard\n"
+"POT-Creation-Date: 2008-07-08 01:18+0200\n"
+"PO-Revision-Date: 2007-03-17 11:03+0100\n"
+"Last-Translator: Bjørn Steensrud <bjornst@powertech.no>\n"
+"Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"<number1@realityx.net>\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "Kan ikke åpne fila %1."
+
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "Fila %1 inneholder ikke gyldig XML."
+
+#: WorkSheet.cc:109
+msgid ""
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
+msgstr ""
+"Fila %1 inneholder ikke en gyldig definisjon på et arbeidsark, som må ha  "
+"dokumenttype «KSysGuardWorkSheet»."
+
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "Ugyldig størrelse på arbeidsark i fil %1."
+
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "Kan ikke lagre fila %1"
+
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "Utklippsboka inneholder ikke en gyldig visningsbeskrivelse."
+
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "Kan ikke koble til «%1»."
+
+#: KSysGuardApplet.cc:209 WorkSheet.cc:331
+msgid "Select Display Type"
+msgstr "Velg visningstype"
+
+#: KSysGuardApplet.cc:210 WorkSheet.cc:332
+msgid "&Signal Plotter"
+msgstr "&Signalplotter"
+
+#: KSysGuardApplet.cc:211 WorkSheet.cc:333
+msgid "&Multimeter"
+msgstr "&Multimeter"
+
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "&Stolpediagram"
+
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "S&ensorlogger"
+
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"Beskjed fra %1:\n"
+"%2"
+
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "Innstillinger for tidtager"
+
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "Bruk oppdateringsintervallet til arbeidsarket"
+
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "Oppdateringsintervall:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
+#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#: rc.cpp:21
+#, no-c-format
+msgid " sec"
+msgstr " sek"
+
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr "Alle visninger av arket blir oppdaterte i den farten angitt her."
+
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "Tilkoblingsvert"
+
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "Vert:"
+
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "Skriv inn navnet på verten du vil koble deg til."
+
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "Tilkoblingstype"
+
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
+
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr "Velg denne for å bruke ssh («secure shell») for å logge deg på verten."
+
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
+
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr ""
+"Velg denne for å bruke rsh («remote shell») for å koble deg til verten."
+
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "Daemon"
+
+#: ksgrd/HostConnector.cc:77
+msgid ""
+"Select this if you want to connect to a ksysguard daemon that is running on the "
+"machine you want to connect to, and is listening for client requests."
+msgstr ""
+"Velg denne hvis du vil koble deg til en ksysguard-daemon som kjører på maskinen "
+"du kobler deg til, og lytter etter forespørsler fra klienter."
+
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "Selvvalgt kommando"
+
+#: ksgrd/HostConnector.cc:81
+msgid ""
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
+msgstr ""
+"Velg denne for å bruke kommandoen du skrev inn under for å starte ksysguardd på "
+"verten."
+
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "Port:"
+
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr ""
+"Skriv inn portnummeret som ksysguard-demonen lytter etter tilkoblinger på."
+
+#: ksgrd/HostConnector.cc:93
+msgid "e.g.  3112"
+msgstr "f.eks  3112"
+
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "Kommando:"
+
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr "Skriv inn kommandoen som kjører ksysguardd på verten du vil overvåke."
+
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "f.eks. ssh -l root en.vert.no ksysguardd"
+
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "Standard stilinnstillinger"
+
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "Visningsstil"
+
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "Første forgrunnsfarge:"
+
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "Andre forgrunnsfarge:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
+#: ksgrd/StyleSettings.cc:61 rc.cpp:126
+#, no-c-format
+msgid "Alarm color:"
+msgstr "Alarmfarge:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
+#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
+#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
+#, no-c-format
+msgid "Background color:"
+msgstr "Bakgrunnsfarge:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "Skriftstørrelse:"
+
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "Sensorfarge"
+
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "Endre farge …"
+
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "Farge %1"
+
+#. i18n: file SystemLoad.sgrd line 5
+#: ksgrd/SensorManager.cc:50 rc.cpp:173
+msgid "CPU Load"
+msgstr "CPUlast"
+
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "Inaktiv last"
+
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
+#: ksysguard.cc:171
+msgid "System Load"
+msgstr "Systemlast"
+
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "Snill-last"
+
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "Brukerlast"
+
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "Minne"
+
+#. i18n: file SystemLoad.sgrd line 13
+#: ksgrd/SensorManager.cc:56 rc.cpp:177
+msgid "Physical Memory"
+msgstr "Fysisk minne"
+
+#. i18n: file SystemLoad.sgrd line 21
+#: ksgrd/SensorManager.cc:57 rc.cpp:179
+msgid "Swap Memory"
+msgstr "Vekselminne"
+
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "Hutiglagerminne"
+
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "Bufferminne"
+
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "Brukt minne"
+
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "Programminne"
+
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "Ledig minne"
+
+#: ksgrd/SensorManager.cc:63
+msgid "Process Count"
+msgstr "Prossessopptelling"
+
+#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
+msgid "Process Controller"
+msgstr "Prossesskontroll"
+
+#: ksgrd/SensorManager.cc:65
+msgid "Disk Throughput"
+msgstr "Diskgjennomgang"
+
+#: ksgrd/SensorManager.cc:66
+msgid ""
+"_: CPU Load\n"
+"Load"
+msgstr "Last"
+
+#: ksgrd/SensorManager.cc:67
+msgid "Total Accesses"
+msgstr "Totale tilganger"
+
+#: ksgrd/SensorManager.cc:68
+msgid "Read Accesses"
+msgstr "Lese-tilganger"
+
+#: ksgrd/SensorManager.cc:69
+msgid "Write Accesses"
+msgstr "Skrive-tilganger"
+
+#: ksgrd/SensorManager.cc:70
+msgid "Read Data"
+msgstr "Lese data"
+
+#: ksgrd/SensorManager.cc:71
+msgid "Write Data"
+msgstr "Skrive data"
+
+#: ksgrd/SensorManager.cc:72
+msgid "Pages In"
+msgstr "Sider inn"
+
+#: ksgrd/SensorManager.cc:73
+msgid "Pages Out"
+msgstr "Sider ut"
+
+#: ksgrd/SensorManager.cc:74
+msgid "Context Switches"
+msgstr "Kontekstbytter"
+
+#: ksgrd/SensorManager.cc:75
+msgid "Network"
+msgstr "Nettverk"
+
+#: ksgrd/SensorManager.cc:76
+msgid "Interfaces"
+msgstr "Grensesnitt"
+
+#: ksgrd/SensorManager.cc:77
+msgid "Receiver"
+msgstr "Mottaker"
+
+#: ksgrd/SensorManager.cc:78
+msgid "Transmitter"
+msgstr "Sender"
+
+#: ksgrd/SensorManager.cc:79
+msgid "Data"
+msgstr "Data"
+
+#: ksgrd/SensorManager.cc:80
+msgid "Compressed Packets"
+msgstr "Komprimerte pakker"
+
+#: ksgrd/SensorManager.cc:81
+msgid "Dropped Packets"
+msgstr "Kasserte pakker"
+
+#: ksgrd/SensorManager.cc:82
+msgid "Errors"
+msgstr "Feil"
+
+#: ksgrd/SensorManager.cc:83
+msgid "FIFO Overruns"
+msgstr "FIFO overløp"
+
+#: ksgrd/SensorManager.cc:84
+msgid "Frame Errors"
+msgstr "Rammefeil"
+
+#: ksgrd/SensorManager.cc:85
+msgid "Multicast"
+msgstr "Flersending"
+
+#: ksgrd/SensorManager.cc:86
+msgid "Packets"
+msgstr "Pakker"
+
+#: ksgrd/SensorManager.cc:87
+msgid "Carrier"
+msgstr "Bærer"
+
+#: ksgrd/SensorManager.cc:88
+msgid "Collisions"
+msgstr "Kollisjoner"
+
+#: ksgrd/SensorManager.cc:89
+msgid "Sockets"
+msgstr "Kontakter"
+
+#: ksgrd/SensorManager.cc:90
+msgid "Total Number"
+msgstr "Totalt antall"
+
+#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
+msgid "Table"
+msgstr "Tabell"
+
+#: ksgrd/SensorManager.cc:92
+msgid "Advanced Power Management"
+msgstr "Avansert energihåndtering"
+
+#: ksgrd/SensorManager.cc:93
+msgid "ACPI"
+msgstr "ACPI"
+
+#: ksgrd/SensorManager.cc:94
+msgid "Thermal Zone"
+msgstr "Temperatursone"
+
+#: ksgrd/SensorManager.cc:95
+msgid "Temperature"
+msgstr "Temperatur"
+
+#: ksgrd/SensorManager.cc:96
+msgid "Fan"
+msgstr "Vifte"
+
+#: ksgrd/SensorManager.cc:97
+msgid "State"
+msgstr "Tilstand"
+
+#: ksgrd/SensorManager.cc:98
+msgid "Battery"
+msgstr "Batteri"
+
+#: ksgrd/SensorManager.cc:99
+msgid "Battery Charge"
+msgstr "Batteriladning"
+
+#: ksgrd/SensorManager.cc:100
+msgid "Battery Usage"
+msgstr "Batteribruk"
+
+#: ksgrd/SensorManager.cc:101
+msgid "Remaining Time"
+msgstr "Tid som gjenstår"
+
+#: ksgrd/SensorManager.cc:102
+msgid "Interrupts"
+msgstr "Avbrudd"
+
+#. i18n: file SystemLoad.sgrd line 10
+#: ksgrd/SensorManager.cc:103 rc.cpp:175
+msgid "Load Average (1 min)"
+msgstr "Gjennomsnittslast (1 min)"
+
+#: ksgrd/SensorManager.cc:104
+msgid "Load Average (5 min)"
+msgstr "Gjennomsnittslast (5 min)"
+
+#: ksgrd/SensorManager.cc:105
+msgid "Load Average (15 min)"
+msgstr "Gjennomsnittslast (15 min)"
+
+#: ksgrd/SensorManager.cc:106
+msgid "Clock Frequency"
+msgstr "Klokkefrekvens"
+
+#: ksgrd/SensorManager.cc:107
+msgid "Hardware Sensors"
+msgstr "Maskinsensorer"
+
+#: ksgrd/SensorManager.cc:108
+msgid "Partition Usage"
+msgstr "Bruk av diskpartisjoner"
+
+#: ksgrd/SensorManager.cc:109
+msgid "Used Space"
+msgstr "Brukt plass"
+
+#: ksgrd/SensorManager.cc:110
+msgid "Free Space"
+msgstr "Fri plass"
+
+#: ksgrd/SensorManager.cc:111
+msgid "Fill Level"
+msgstr "Fyllingsgrad"
+
+#: ksgrd/SensorManager.cc:115
+#, c-format
+msgid "CPU%1"
+msgstr "CPU%1"
+
+#: ksgrd/SensorManager.cc:117
+#, c-format
+msgid "Disk%1"
+msgstr "Disk%1"
+
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Fan%1"
+msgstr "Vifte%1"
+
+#: ksgrd/SensorManager.cc:124
+#, c-format
+msgid "Temperature%1"
+msgstr "Temperatur%1"
+
+#: ksgrd/SensorManager.cc:127
+msgid "Total"
+msgstr "Totalt"
+
+#: ksgrd/SensorManager.cc:133
+#, c-format
+msgid "Int%1"
+msgstr "Heltall%1"
+
+#: ksgrd/SensorManager.cc:140
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/s"
+
+#: ksgrd/SensorManager.cc:141
+msgid "kBytes"
+msgstr "kBytes"
+
+#: ksgrd/SensorManager.cc:142
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "min"
+
+#: ksgrd/SensorManager.cc:143
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
+
+#: ksgrd/SensorManager.cc:146
+msgid "Integer Value"
+msgstr "Heltallsverdi"
+
+#: ksgrd/SensorManager.cc:147
+msgid "Floating Point Value"
+msgstr "Flyttallsverdi"
+
+#: ksgrd/SensorManager.cc:289
+msgid "Connection to %1 has been lost."
+msgstr "Forbindelsen til %1 er brutt."
+
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "Forbindelse til %1 ble avvist"
+
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "Vert %1 ikke funnet"
+
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "Tidsavbrudd ved verten %1"
+
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "Nettverksfeil ved verten %1"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Øystein Skadsem"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "oskadsem@start.no"
+
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"Dette er ditt arbeidsområde. Det inneholder arbeidsarkene dine. Du må lage et "
+"nytt arbeidsark (Meny->Fil->Ny) før du kan dra sensorer hit."
+
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "Prosesstabell"
+
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "Ark %1"
+
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"Arbeidsarket «%1» inneholder ulagrede data.\n"
+"Vil du lagre arbeidsarket?"
+
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|Sensorfiler"
+
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "Velg et arbeidsark å hente inn"
+
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "Du har ikke noe arbeidsark som kan lagres."
+
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "Lagre gjeldende arbeidsark som"
+
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "Det er ingen arbeidsark som kunne slettes."
+
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "Finner ikke fila ProcessTable.sgrd."
+
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "Innstillinger for System Guard"
+
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "Antall visninger:"
+
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "Størrelsesforhold:"
+
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
+
+#: SensorDisplayLib/ProcessList.cc:110
+msgid ""
+"_: process status\n"
+"running"
+msgstr "kjører"
+
+#: SensorDisplayLib/ProcessList.cc:112
+msgid ""
+"_: process status\n"
+"sleeping"
+msgstr "sover"
+
+#: SensorDisplayLib/ProcessList.cc:114
+msgid ""
+"_: process status\n"
+"disk sleep"
+msgstr "sover disk"
+
+#: SensorDisplayLib/ProcessList.cc:115
+msgid ""
+"_: process status\n"
+"zombie"
+msgstr "zombie"
+
+#: SensorDisplayLib/ProcessList.cc:117
+msgid ""
+"_: process status\n"
+"stopped"
+msgstr "stoppet"
+
+#: SensorDisplayLib/ProcessList.cc:118
+msgid ""
+"_: process status\n"
+"paging"
+msgstr "sideveksler"
+
+#: SensorDisplayLib/ProcessList.cc:119
+msgid ""
+"_: process status\n"
+"idle"
+msgstr "inaktiv"
+
+#: SensorDisplayLib/ProcessList.cc:250
+msgid "Remove Column"
+msgstr "Fjern kolonne"
+
+#: SensorDisplayLib/ProcessList.cc:251
+msgid "Add Column"
+msgstr "Legg til kolonne"
+
+#: SensorDisplayLib/ProcessList.cc:252
+msgid "Help on Column"
+msgstr "Hjelp om kolonne"
+
+#: SensorDisplayLib/ProcessController.cc:62
+#: SensorDisplayLib/ProcessList.cc:771
+msgid "Nice"
+msgstr "Snill"
+
+#: SensorDisplayLib/ProcessList.cc:776
+msgid "Hide Column"
+msgstr "Skjul kolonne"
+
+#: SensorDisplayLib/ProcessList.cc:782
+msgid "Show Column"
+msgstr "Vis kolonne"
+
+#: SensorDisplayLib/ProcessList.cc:786
+msgid "Select All Processes"
+msgstr "Merk alle prosesser"
+
+#: SensorDisplayLib/ProcessList.cc:787
+msgid "Unselect All Processes"
+msgstr "Avmerk alle prosesser"
+
+#: SensorDisplayLib/ProcessList.cc:793
+msgid "Select All Child Processes"
+msgstr "Merk alle barneprosesser"
+
+#: SensorDisplayLib/ProcessList.cc:794
+msgid "Unselect All Child Processes"
+msgstr "Avmerk alle barneprosesser"
+
+#: SensorDisplayLib/ProcessList.cc:796
+msgid "SIGABRT"
+msgstr "SIGABRT"
+
+#: SensorDisplayLib/ProcessList.cc:797
+msgid "SIGALRM"
+msgstr "SIGALRM"
+
+#: SensorDisplayLib/ProcessList.cc:798
+msgid "SIGCHLD"
+msgstr "SIGCHLD"
+
+#: SensorDisplayLib/ProcessList.cc:799
+msgid "SIGCONT"
+msgstr "SIGCONT"
+
+#: SensorDisplayLib/ProcessList.cc:800
+msgid "SIGFPE"
+msgstr "SIGFPE"
+
+#: SensorDisplayLib/ProcessList.cc:801
+msgid "SIGHUP"
+msgstr "SIGHUP"
+
+#: SensorDisplayLib/ProcessList.cc:802
+msgid "SIGILL"
+msgstr "SIGILL"
+
+#: SensorDisplayLib/ProcessList.cc:803
+msgid "SIGINT"
+msgstr "SIGINT"
+
+#: SensorDisplayLib/ProcessList.cc:804
+msgid "SIGKILL"
+msgstr "SIGKILL"
+
+#: SensorDisplayLib/ProcessList.cc:805
+msgid "SIGPIPE"
+msgstr "SIGPIPE"
+
+#: SensorDisplayLib/ProcessList.cc:806
+msgid "SIGQUIT"
+msgstr "SIGQUIT"
+
+#: SensorDisplayLib/ProcessList.cc:807
+msgid "SIGSEGV"
+msgstr "SIGSEGV"
+
+#: SensorDisplayLib/ProcessList.cc:808
+msgid "SIGSTOP"
+msgstr "SIGSTOP"
+
+#: SensorDisplayLib/ProcessList.cc:809
+msgid "SIGTERM"
+msgstr "SIGTERM"
+
+#: SensorDisplayLib/ProcessList.cc:810
+msgid "SIGTSTP"
+msgstr "SIGTSTP"
+
+#: SensorDisplayLib/ProcessList.cc:811
+msgid "SIGTTIN"
+msgstr "SIGTTIN"
+
+#: SensorDisplayLib/ProcessList.cc:812
+msgid "SIGTTOU"
+msgstr "SIGTTOU"
+
+#: SensorDisplayLib/ProcessList.cc:813
+msgid "SIGUSR1"
+msgstr "SIGUSR1"
+
+#: SensorDisplayLib/ProcessList.cc:814
+msgid "SIGUSR2"
+msgstr "SIGUSR2"
+
+#: SensorDisplayLib/ProcessList.cc:817
+msgid "Send Signal"
+msgstr "Send signal"
+
+#: SensorDisplayLib/ProcessList.cc:825
+msgid "Renice Process..."
+msgstr "Endre prioritetsverdi på Prosess …"
+
+#: SensorDisplayLib/ProcessList.cc:873
+msgid ""
+"_n: Do you really want to send signal %1 to the selected process?\n"
+"Do you really want to send signal %1 to the %n selected processes?"
+msgstr ""
+"Vil du virkelig sende signal %1 til den valgte prosessen?\n"
+"Vil du virkelig sende signal %1 til de %n valgte prosessene?"
+
+#: SensorDisplayLib/ProcessList.cc:877
+msgid "Send"
+msgstr "Send"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:43
+msgid "Edit BarGraph Preferences"
+msgstr "Endre innstillingene for stolpediagram"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:47
+msgid "Range"
+msgstr "Område"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
+#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
+#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
+#, no-c-format
+msgid "Title"
+msgstr "Tittel"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
+#: SensorDisplayLib/DancingBarsSettings.cc:54
+#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
+#, no-c-format
+msgid "Enter the title of the display here."
+msgstr "Skriv tittelen på ruta her."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:59
+msgid "Display Range"
+msgstr "Vis område"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:63
+#: SensorDisplayLib/FancyPlotterSettings.cc:89
+msgid "Minimum value:"
+msgstr "Minimumsverdi:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:67
+#: SensorDisplayLib/FancyPlotterSettings.cc:95
+msgid ""
+"Enter the minimum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Oppgi den minste verdien for ruta her. Dersom begge verdiene er 0, blir "
+"automatisk områdesjekk tatt i bruk."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:71
+#: SensorDisplayLib/FancyPlotterSettings.cc:99
+msgid "Maximum value:"
+msgstr "Maksimumverdi:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:75
+#: SensorDisplayLib/FancyPlotterSettings.cc:105
+msgid ""
+"Enter the maximum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Oppgi den høyeste verdien for ruta her. Dersom begge verdiene er 0, blir "
+"automatisk områdesjekk tatt i bruk."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
+#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
+#, no-c-format
+msgid "Alarms"
+msgstr "Alarmer"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
+#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
+#, no-c-format
+msgid "Alarm for Minimum Value"
+msgstr "Alarm ved minimumverdi"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:91
+#: SensorDisplayLib/DancingBarsSettings.cc:109
+msgid "Enable alarm"
+msgstr "Skru på alarm"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
+#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
+#, no-c-format
+msgid "Enable the minimum value alarm."
+msgstr "Skru på alarmen for minimum verdi."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
+#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
+#, no-c-format
+msgid "Lower limit:"
+msgstr "Nedre grense:"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
+#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
+#, no-c-format
+msgid "Alarm for Maximum Value"
+msgstr "Alarm ved maksimumsverdi"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
+#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
+#, no-c-format
+msgid "Enable the maximum value alarm."
+msgstr "Skru på alarm for maksimumsverdi."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
+#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
+#, no-c-format
+msgid "Upper limit:"
+msgstr "Øvre grense:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:126
+msgid "Look"
+msgstr "Se"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:129
+msgid "Normal bar color:"
+msgstr "Normal linelinjefarge:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:136
+msgid "Out-of-range color:"
+msgstr "Farge for verdi utenfor grensene:"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:154
+msgid ""
+"This determines the size of the font used to print a label underneath the bars. "
+"Bars are automatically suppressed if text becomes too large, so it is advisable "
+"to use a small font size here."
+msgstr ""
+"Dette bestemmer skriftstørrelsen som brukes for etikettene under stolpene. "
+"Stolper sløyfes automatisk hvis teksten blir for stor, så det er tilrådelig å "
+"bruke en liten skriftstørrelse her."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:161
+#: SensorDisplayLib/FancyPlotterSettings.cc:224
+msgid "Sensors"
+msgstr "Sensorer"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:166
+#: SensorDisplayLib/FancyPlotterSettings.cc:231
+msgid "Host"
+msgstr "Vert"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:167
+#: SensorDisplayLib/FancyPlotterSettings.cc:232
+msgid "Sensor"
+msgstr "Sensor"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:168
+msgid "Label"
+msgstr "Etikett"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:169
+#: SensorDisplayLib/FancyPlotterSettings.cc:233
+msgid "Unit"
+msgstr "Enhet"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "Status"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:174
+msgid "Edit..."
+msgstr "Rediger …"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:176
+msgid "Push this button to configure the label."
+msgstr "Trykk på denne knappen for å sette opp etiketten."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:181
+#: SensorDisplayLib/FancyPlotterSettings.cc:249
+msgid "Push this button to delete the sensor."
+msgstr "Trykk på denne knappen for å slette sensoren."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:356
+msgid "Label of Bar Graph"
+msgstr "Redigér etikett på stolpediagrammet"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:357
+msgid "Enter new label:"
+msgstr "Skriv ny etikett:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:47
+msgid "Signal Plotter Settings"
+msgstr "Innstillinger for signalplotteren"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:57
+msgid "Style"
+msgstr "Stil"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:60
+msgid "Title:"
+msgstr "Tittel:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:69
+msgid "Graph Drawing Style"
+msgstr "Graftegnestil"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:71
+msgid "Basic polygons"
+msgstr "Enkle polygoner"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:73
+msgid "Original - single line per data point"
+msgstr "Original – enkel linje for hvert datapunkt"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:78
+msgid "Scales"
+msgstr "Skalaer"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:81
+msgid "Vertical Scale"
+msgstr "Vertikal vekt"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:85
+msgid "Automatic range detection"
+msgstr "Automatisk gjenkjenning av verdiområdet"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:86
+msgid ""
+"Check this box if you want the display range to adapt dynamically to the "
+"currently displayed values; if you do not check this, you have to specify the "
+"range you want in the fields below."
+msgstr ""
+"Kryss av her dersom du vil at visningsområdet skal justere seg dynamisk til de "
+"verdiene som vises til enhver tid. Hvis du ikke krysser av, må du velge området "
+"du vil ha i feltene nedenfor."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:111
+msgid "Horizontal Scale"
+msgstr "Horisontal skala"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:120
+msgid "pixel(s) per time period"
+msgstr "piksler per tidsperiode"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:126
+msgid "Grid"
+msgstr "Rutenett"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:129
+msgid "Lines"
+msgstr "Linjer"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:133
+msgid "Vertical lines"
+msgstr "Lodrette linjer"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:134
+msgid "Check this to activate the vertical lines if display is large enough."
+msgstr ""
+"Kryss av denne for å slå på loddrette linjer hvis skjermen er stor nok."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:137
+msgid "Distance:"
+msgstr "Avstand:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:143
+msgid "Enter the distance between two vertical lines here."
+msgstr "Skriv inn avstanden mellom to loddrette linjer her."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:147
+msgid "Vertical lines scroll"
+msgstr "Loddrette rullefelt"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:150
+msgid "Horizontal lines"
+msgstr "Vanrette linjer"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:151
+msgid "Check this to enable horizontal lines if display is large enough."
+msgstr ""
+"Kryss av denne boksen for å slå på vannrette linjer hvis skjermen er stor nok."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:154
+msgid "Count:"
+msgstr "Antall:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:160
+msgid "Enter the number of horizontal lines here."
+msgstr "Skriv inn antall vannrette linjer her."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
+#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
+#, no-c-format
+msgid "Text"
+msgstr "Tekst"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:172
+msgid "Labels"
+msgstr "Etiketter"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:173
+msgid ""
+"Check this box if horizontal lines should be decorated with the values they "
+"mark."
+msgstr ""
+"Kryss av denne boksen hvis vannrette linjer skal dekoreres med verdiene de "
+"merker."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:185
+msgid "Top bar"
+msgstr "Topplinje"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:186
+msgid ""
+"Check this to active the display title bar. This is probably only useful for "
+"applet displays. The bar is only visible if the display is large enough."
+msgstr ""
+"Kryss av her for å slå på tittellinja. Dette er antakelig bare nyttig for "
+"applet-visninger. Titellinja synes bare dersom visningsvinduet er stort nok."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
+#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
+#: rc.cpp:117 rc.cpp:138
+#, no-c-format
+msgid "Colors"
+msgstr "Farger"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:196
+msgid "Vertical lines:"
+msgstr "Loddrette linjer:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:203
+msgid "Horizontal lines:"
+msgstr "Vannrette linjer:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:210
+msgid "Background:"
+msgstr "Bakgrunn:"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:242
+msgid "Set Color..."
+msgstr "Sett farge …"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:244
+msgid "Push this button to configure the color of the sensor in the diagram."
+msgstr "Trykk på denne knappen for å velge farge på sensoren i diagrammet."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:252
+msgid "Move Up"
+msgstr "Flytt opp"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:256
+msgid "Move Down"
+msgstr "Flytt ned"
+
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "Sensorlogger"
+
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "Start &systemvakt"
+
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "&Egenskaper"
+
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "&Fjern visning"
+
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "&Tilpass oppdateringsintervall …"
+
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "&Fortsett oppdatering"
+
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "&Pause i oppdatering"
+
+#: SensorDisplayLib/SensorDisplay.cc:240
+msgid ""
+"<qt>"
+"<p>This is a sensor display. To customize a sensor display click and hold the "
+"right mouse button on either the frame or the display box and select the <i>"
+"Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
+msgstr ""
+"<qt>"
+"<p> Dette er en sensor-visning. For å tilpasse en sensorvisning, klikk og hold "
+"høyre museknapp over enten ramma eller visningsboksen og velg </>Egenskaper</i> "
+"fra menyen. Velg <i>Fjern</i> for å fjerne visningen fra arbeidsarket.</p>"
+"%1</qt>"
+
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "Logging"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
+#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
+#, no-c-format
+msgid "Timer Interval"
+msgstr "Tidsgrenseintervall"
+
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "Sensornavn"
+
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "Vertsnavn"
+
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "Loggfil"
+
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "&Fjern sensor"
+
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "&Rediger sensor …"
+
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "St&opp logging"
+
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "S&tart logging"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
+#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
+#, no-c-format
+msgid "Foreground color:"
+msgstr "Forgrunnsfarge:"
+
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "Multimeter-innstillinger"
+
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "Innstillinger for listevisning"
+
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "Endre snillverdi på Prosess"
+
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+"Du skal til å endre prioriteten for prosess %1. \n"
+"Bemerk at bare superbruker (root) kan senke \n"
+"«snill»-verdien for en prosess. Jo lavere tall, desto\n"
+"høyere prioritet. \n"
+"Skriv inn ønsket «snill»-verdi:"
+
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "Innstillinger for sensorlogger"
+
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "Slipp sensor her"
+
+#: SensorDisplayLib/DummyDisplay.cc:38
+msgid ""
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor the "
+"values of the sensor over time."
+msgstr ""
+"Dette er et tomrom i et arbeidsark. Dra en sensor fra sensorleseren og slipp "
+"den her. Da dukker det opp en sensorvisning som du kan bruke til å kontrollere "
+"sensorens verdier over tid."
+
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "Navn"
+
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
+
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
+
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
+
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
+
+#: SensorDisplayLib/ProcessController.cc:60
+#, c-format
+msgid "User%"
+msgstr "Bruker%"
+
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "System%"
+
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "VmSize"
+
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "VmRss"
+
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "Brukernavn"
+
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "Kommando"
+
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "Alle prossesser"
+
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "Systemprossesser"
+
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "Brukerprossesser"
+
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "Egne prossesser"
+
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "&Tre"
+
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "&Frisk opp"
+
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "&Drep"
+
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1: Kjørende prossess"
+
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "Du må velge en prossess først."
+
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
+msgid ""
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr ""
+"Vil du drepe den valgte prosessen?\n"
+"Vil du drepe de valgte %n prosessene?"
+
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "Drep prossess"
+
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "Drep"
+
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "Ikke spør igjen"
+
+#: SensorDisplayLib/ProcessController.cc:344
+#, c-format
+msgid "Error while attempting to kill process %1."
+msgstr "Feil under forsøk på å drepe prossessen %1."
+
+#: SensorDisplayLib/ProcessController.cc:349
+#, c-format
+msgid "Insufficient permissions to kill process %1."
+msgstr "Mangler rettigheter for å drepe prossessen %1."
+
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "Prossessen %1 har allerede forsvunnet."
+
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "Ugyldig signal."
+
+#: SensorDisplayLib/ProcessController.cc:379
+#, c-format
+msgid "Error while attempting to renice process %1."
+msgstr "Feil ved forsøk på å endre snillverdi på prosessen %1."
+
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "Mangler rettigheter for å endre snillverdi på prosessen %1."
+
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "Ugyldig argument."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
+#: rc.cpp:27 rc.cpp:78
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "&Slå på alarm"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
+#: rc.cpp:39 rc.cpp:66
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "S&lå på alarm"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
+#: rc.cpp:54
+#, no-c-format
+msgid "&Show unit"
+msgstr "&Vis enhet"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
+#: rc.cpp:57
+#, no-c-format
+msgid "Enable this to append the unit to the title of the display."
+msgstr "Velg denne for å legge til enheten som tittel på visningen."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
+#: rc.cpp:90
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "Normal nummerfarge:"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
+#: rc.cpp:93
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "Nummerfarge ved alarm:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
+#: rc.cpp:105 rc.cpp:120
+#, no-c-format
+msgid "Text color:"
+msgstr "Tekstfarge:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
+#: rc.cpp:108
+#, no-c-format
+msgid "Grid color:"
+msgstr "Rutefarge:"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
+#: rc.cpp:129
+#, no-c-format
+msgid "Log File Settings"
+msgstr "Innstillinger for loggfil"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
+#: rc.cpp:150
+#, no-c-format
+msgid "Select Font..."
+msgstr "Velg skrifttype …"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
+#: rc.cpp:153
+#, no-c-format
+msgid "Filter"
+msgstr "Filter"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
+#: rc.cpp:156
+#, no-c-format
+msgid "&Add"
+msgstr "&Legg til"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
+#: rc.cpp:162
+#, no-c-format
+msgid "&Change"
+msgstr "&Endre"
+
+#. i18n: file KSysGuardApplet.xml line 5
+#: rc.cpp:181
+msgid "CPU"
+msgstr "Prosessor"
+
+#. i18n: file KSysGuardApplet.xml line 10
+#: rc.cpp:183
+msgid "Mem"
+msgstr "Minne"
+
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "Innstillinger for arbeidsark"
+
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "Rader:"
+
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "Kolonner:"
+
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "Skriv inn her antall rader arket skal ha."
+
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "Skriv inn her antall kolonner arket skal ha."
+
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "Skriv tittelen på arbeidsarket."
+
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "&Dansende stolper"
+
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+msgid ""
+"The KSysGuard applet does not support displaying of this type of sensor. Please "
+"choose another sensor."
+msgstr ""
+"Systemvakt-appleten støtter ikke visning av denne sensortypen. Velg en annen "
+"sensor."
+
+#: KSysGuardApplet.cc:334
+msgid ""
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
+msgstr ""
+"Fila %1 inneholder ikke en gyldig applett-definisjon, som må ha dokumenttypen\n"
+"'KSysGuardApplet'."
+
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the KDE System Guard into this cell."
+msgstr "Dra sensorer fra KDE systemvakt til denne ruten."
+
+#: SensorBrowser.cc:77
+msgid "Sensor Browser"
+msgstr "Sensorleser"
+
+#: SensorBrowser.cc:78
+msgid "Sensor Type"
+msgstr "Sensortype"
+
+#: SensorBrowser.cc:81
+msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+msgstr "Dra sensorer til tomme felt i et arbeidsark eller miniprogram."
+
+#: SensorBrowser.cc:88
+msgid ""
+"The sensor browser lists the connected hosts and the sensors that they provide. "
+"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
+"display will appear that visualizes the values provided by the sensor. Some "
+"sensor displays can display values of multiple sensors. Simply drag other "
+"sensors on to the display to add more sensors."
+msgstr ""
+"Sensorleseren viser tilkoblede verter og de sensorene som de tilbyr. Klikk og "
+"dra sensorer til slippsonene i et arbeidsark eller panel-appleten. Verdiene som "
+"sensoren melder vil bli vist. Noen sensorvisninger kan vise verdier fra flere "
+"sensorer. Dra ganske enkelt andre sensorer oppå visningen for å legge til flere "
+"sensorer."
+
+#: SensorBrowser.cc:148
+msgid "Drag sensors to empty fields in a worksheet."
+msgstr "Dra sensorer til tomme felt i et arbeidsark."
+
+#: ksysguard.cc:64
+msgid "KDE system guard"
+msgstr "KDE systemvakt"
+
+#: ksysguard.cc:74 ksysguard.cc:556
+msgid "KDE System Guard"
+msgstr "KDE systemvakt"
+
+#: ksysguard.cc:100
+msgid "88888 Processes"
+msgstr "88888 prosesser"
+
+#: ksysguard.cc:101
+msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+msgstr "Minne: 88888888888 kB brukt, 88888888888 kB ledig"
+
+#: ksysguard.cc:103
+msgid "Swap: 888888888 kB used, 888888888 kB free"
+msgstr "Vekselminne: 888888888 kB brukt, 888888888 kB ledig"
+
+#: ksysguard.cc:108
+msgid "&New Worksheet..."
+msgstr "&Nytt arbeidsark …"
+
+#: ksysguard.cc:111
+msgid "Import Worksheet..."
+msgstr "Importer arbeidsark"
+
+#: ksysguard.cc:114
+msgid "&Import Recent Worksheet"
+msgstr "&Importer nylig brukt arbeidsark …"
+
+#: ksysguard.cc:117
+msgid "&Remove Worksheet"
+msgstr "&Fjern arbeidsark"
+
+#: ksysguard.cc:120
+msgid "&Export Worksheet..."
+msgstr "&Eksporter arbeidsark …"
+
+#: ksysguard.cc:125
+msgid "C&onnect Host..."
+msgstr "Koble &til vert …"
+
+#: ksysguard.cc:127
+msgid "D&isconnect Host"
+msgstr "Koble &fra vert"
+
+#: ksysguard.cc:133
+msgid "&Worksheet Properties"
+msgstr "Egenskaper for &arbeidsark"
+
+#: ksysguard.cc:136
+msgid "Load Standard Sheets"
+msgstr "Last inn standardark"
+
+#: ksysguard.cc:140
+msgid "Configure &Style..."
+msgstr "Sette opp &stil …"
+
+#: ksysguard.cc:157
+msgid "Do you really want to restore the default worksheets?"
+msgstr "Er du sikker på at du vil tilbakestille til standard arbeidsark?"
+
+#: ksysguard.cc:158
+msgid "Reset All Worksheets"
+msgstr "Nullstill alle arbeidsark"
+
+#: ksysguard.cc:159
+msgid "Reset"
+msgstr "Tilbakestill"
+
+#: ksysguard.cc:436
+#, c-format
+msgid ""
+"_n: 1 Process\n"
+"%n Processes"
+msgstr ""
+"1 prosess\n"
+"%n prosesser"
+
+#: ksysguard.cc:446
+msgid "Memory: %1 %2 used, %3 %4 free"
+msgstr "Minne: %1 %2 brukt, %3 %4 ledig"
+
+#: ksysguard.cc:504
+msgid "No swap space available"
+msgstr "Veksleområde er ikke tilgjengelig"
+
+#: ksysguard.cc:506
+msgid "Swap: %1 %2 used, %3 %4 free"
+msgstr "Vekselminne: %1 %2 brukt, %3 %4 ledig"
+
+#: ksysguard.cc:515
+msgid "Show only process list of local host"
+msgstr "Vis bare prossesslista for lokal vert"
+
+#: ksysguard.cc:516
+msgid "Optional worksheet files to load"
+msgstr "Valgfrie arbeidsark som skal lastes"
+
+#: ksysguard.cc:558
+msgid "(c) 1996-2002 The KSysGuard Developers"
+msgstr "© 1996–2002 The KSysGuard-utviklere"
+
+#: ksysguard.cc:566
+msgid ""
+"Solaris Support\n"
+"Parts derived (by permission) from the sunos5\n"
+"module of William LeFebvre's \"top\" utility."
+msgstr ""
+"Støtte for Solaris\n"
+"Fått deler (med tillatelse) fra sunos5-\n"
+"modulen til verktøyet  «top» av\n"
+"William LeFebvreDo you really want to delete the display?Er du sikker på at du "
+"vil slette visningen?Delete DisplaySlett visningForeground "
+"Color:Forgrunnsfarge:Background Color:Bakgrunnsfarge:0"