Automated l10n update (.po files)

1 files changed, 918 insertions, 917 deletions

diff --git a/tde-i18n-nb/messages/tdebase/ksysguard.po b/tde-i18n-nb/messages/tdebase/ksysguard.po
index c78ed5bbc05..a5f3af58aa2 100644
--- a/tde-i18n-nb/messages/tdebase/ksysguard.po
+++ b/tde-i18n-nb/messages/tdebase/ksysguard.po
@@ -8,50 +8,17 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: ksysguard\n"
-"POT-Creation-Date: 2008-07-08 01:18+0200\n"
+"POT-Creation-Date: 2014-09-29 12:05-0500\n"
 "PO-Revision-Date: 2007-03-17 11:03+0100\n"
 "Last-Translator: Bjørn Steensrud <bjornst@powertech.no>\n"
 "Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "<number1@realityx.net>\n"
 "X-Generator: KBabel 1.11.4\n"
 
-#: KSysGuardApplet.cc:318 WorkSheet.cc:94
-#, c-format
-msgid "Cannot open the file %1."
-msgstr "Kan ikke åpne fila %1."
-
-#: KSysGuardApplet.cc:327 WorkSheet.cc:102
-msgid "The file %1 does not contain valid XML."
-msgstr "Fila %1 inneholder ikke gyldig XML."
-
-#: WorkSheet.cc:109
-msgid ""
-"The file %1 does not contain a valid worksheet definition, which must have a "
-"document type 'KSysGuardWorkSheet'."
-msgstr ""
-"Fila %1 inneholder ikke en gyldig definisjon på et arbeidsark, som må ha  "
-"dokumenttype «KSysGuardWorkSheet»."
-
-#: WorkSheet.cc:125
-msgid "The file %1 has an invalid worksheet size."
-msgstr "Ugyldig størrelse på arbeidsark i fil %1."
-
-#: KSysGuardApplet.cc:476 WorkSheet.cc:225
-#, c-format
-msgid "Cannot save file %1"
-msgstr "Kan ikke lagre fila %1"
-
-#: WorkSheet.cc:273
-msgid "The clipboard does not contain a valid display description."
-msgstr "Utklippsboka inneholder ikke en gyldig visningsbeskrivelse."
-
-#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
-msgid "It is impossible to connect to '%1'."
-msgstr "Kan ikke koble til «%1»."
-
 #: KSysGuardApplet.cc:209 WorkSheet.cc:331
 msgid "Select Display Type"
 msgstr "Velg visningstype"
@@ -64,589 +31,296 @@ msgstr "&Signalplotter"
 msgid "&Multimeter"
 msgstr "&Multimeter"
 
-#: WorkSheet.cc:334
-msgid "&BarGraph"
-msgstr "&Stolpediagram"
-
-#: WorkSheet.cc:335
-msgid "S&ensorLogger"
-msgstr "S&ensorlogger"
-
-#: ksgrd/SensorAgent.cc:88
-msgid ""
-"Message from %1:\n"
-"%2"
-msgstr ""
-"Beskjed fra %1:\n"
-"%2"
-
-#: ksgrd/TimerSettings.cc:36
-msgid "Timer Settings"
-msgstr "Innstillinger for tidtager"
-
-#: ksgrd/TimerSettings.cc:43
-msgid "Use update interval of worksheet"
-msgstr "Bruk oppdateringsintervallet til arbeidsarket"
-
-#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
-msgid "Update interval:"
-msgstr "Oppdateringsintervall:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
-#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
-#: rc.cpp:21
-#, no-c-format
-msgid " sec"
-msgstr " sek"
-
-#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
-msgid "All displays of the sheet are updated at the rate specified here."
-msgstr "Alle visninger av arket blir oppdaterte i den farten angitt her."
-
-#: ksgrd/HostConnector.cc:37
-msgid "Connect Host"
-msgstr "Tilkoblingsvert"
-
-#: ksgrd/HostConnector.cc:44
-msgid "Host:"
-msgstr "Vert:"
-
-#: ksgrd/HostConnector.cc:54
-msgid "Enter the name of the host you want to connect to."
-msgstr "Skriv inn navnet på verten du vil koble deg til."
-
-#: ksgrd/HostConnector.cc:61
-msgid "Connection Type"
-msgstr "Tilkoblingstype"
-
-#: ksgrd/HostConnector.cc:66
-msgid "ssh"
-msgstr "ssh"
-
-#: ksgrd/HostConnector.cc:69
-msgid "Select this to use the secure shell to login to the remote host."
-msgstr "Velg denne for å bruke ssh («secure shell») for å logge deg på verten."
-
-#: ksgrd/HostConnector.cc:72
-msgid "rsh"
-msgstr "rsh"
-
-#: ksgrd/HostConnector.cc:73
-msgid "Select this to use the remote shell to login to the remote host."
-msgstr ""
-"Velg denne for å bruke rsh («remote shell») for å koble deg til verten."
-
-#: ksgrd/HostConnector.cc:76
-msgid "Daemon"
-msgstr "Daemon"
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "&Dansende stolper"
 
-#: ksgrd/HostConnector.cc:77
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
 msgid ""
-"Select this if you want to connect to a ksysguard daemon that is running on the "
-"machine you want to connect to, and is listening for client requests."
+"The KSysGuard applet does not support displaying of this type of sensor. Please "
+"choose another sensor."
 msgstr ""
-"Velg denne hvis du vil koble deg til en ksysguard-daemon som kjører på maskinen "
-"du kobler deg til, og lytter etter forespørsler fra klienter."
-
-#: ksgrd/HostConnector.cc:80
-msgid "Custom command"
-msgstr "Selvvalgt kommando"
+"Systemvakt-appleten støtter ikke visning av denne sensortypen. Velg en annen "
+"sensor."
 
-#: ksgrd/HostConnector.cc:81
-msgid ""
-"Select this to use the command you entered below to start ksysguardd on the "
-"remote host."
-msgstr ""
-"Velg denne for å bruke kommandoen du skrev inn under for å starte ksysguardd på "
-"verten."
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "Kan ikke åpne fila %1."
 
-#: ksgrd/HostConnector.cc:84
-msgid "Port:"
-msgstr "Port:"
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "Fila %1 inneholder ikke gyldig XML."
 
-#: ksgrd/HostConnector.cc:90
+#: KSysGuardApplet.cc:334
 msgid ""
-"Enter the port number on which the ksysguard daemon is listening for "
-"connections."
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
 msgstr ""
-"Skriv inn portnummeret som ksysguard-demonen lytter etter tilkoblinger på."
-
-#: ksgrd/HostConnector.cc:93
-msgid "e.g.  3112"
-msgstr "f.eks  3112"
-
-#: ksgrd/HostConnector.cc:96
-msgid "Command:"
-msgstr "Kommando:"
-
-#: ksgrd/HostConnector.cc:105
-msgid "Enter the command that runs ksysguardd on the host you want to monitor."
-msgstr "Skriv inn kommandoen som kjører ksysguardd på verten du vil overvåke."
-
-#: ksgrd/HostConnector.cc:109
-msgid "e.g. ssh -l root remote.host.org ksysguardd"
-msgstr "f.eks. ssh -l root en.vert.no ksysguardd"
+"Fila %1 inneholder ikke en gyldig applett-definisjon, som må ha dokumenttypen\n"
+"'KSysGuardApplet'."
 
-#: ksgrd/StyleSettings.cc:41
-msgid "Global Style Settings"
-msgstr "Standard stilinnstillinger"
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "Kan ikke lagre fila %1"
 
-#: ksgrd/StyleSettings.cc:44
-msgid "Display Style"
-msgstr "Visningsstil"
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the TDE System Guard into this cell."
+msgstr "Dra sensorer fra TDE systemvakt til denne ruten."
 
-#: ksgrd/StyleSettings.cc:47
-msgid "First foreground color:"
-msgstr "Første forgrunnsfarge:"
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "Multimeter-innstillinger"
 
-#: ksgrd/StyleSettings.cc:54
-msgid "Second foreground color:"
-msgstr "Andre forgrunnsfarge:"
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "Navn"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
-#: ksgrd/StyleSettings.cc:61 rc.cpp:126
-#, no-c-format
-msgid "Alarm color:"
-msgstr "Alarmfarge:"
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
-#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
-#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
-#, no-c-format
-msgid "Background color:"
-msgstr "Bakgrunnsfarge:"
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:150
-#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
-msgid "Font size:"
-msgstr "Skriftstørrelse:"
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
 
-#: ksgrd/StyleSettings.cc:85
-msgid "Sensor Colors"
-msgstr "Sensorfarge"
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
 
-#: ksgrd/StyleSettings.cc:91
-msgid "Change Color..."
-msgstr "Endre farge …"
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "Status"
 
-#: ksgrd/StyleSettings.cc:166
+#: SensorDisplayLib/ProcessController.cc:60
 #, c-format
-msgid "Color %1"
-msgstr "Farge %1"
-
-#. i18n: file SystemLoad.sgrd line 5
-#: ksgrd/SensorManager.cc:50 rc.cpp:173
-msgid "CPU Load"
-msgstr "CPUlast"
+msgid "User%"
+msgstr "Bruker%"
 
-#: ksgrd/SensorManager.cc:51
-msgid "Idle Load"
-msgstr "Inaktiv last"
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "System%"
 
-#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
-#: ksysguard.cc:171
-msgid "System Load"
-msgstr "Systemlast"
+#: SensorDisplayLib/ProcessController.cc:62
+#: SensorDisplayLib/ProcessList.cc:776
+msgid "Nice"
+msgstr "Snill"
 
-#: ksgrd/SensorManager.cc:53
-msgid "Nice Load"
-msgstr "Snill-last"
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "VmSize"
 
-#: ksgrd/SensorManager.cc:54
-msgid "User Load"
-msgstr "Brukerlast"
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "VmRss"
 
-#: ksgrd/SensorManager.cc:55
-msgid "Memory"
-msgstr "Minne"
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "Brukernavn"
 
-#. i18n: file SystemLoad.sgrd line 13
-#: ksgrd/SensorManager.cc:56 rc.cpp:177
-msgid "Physical Memory"
-msgstr "Fysisk minne"
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "Kommando"
 
-#. i18n: file SystemLoad.sgrd line 21
-#: ksgrd/SensorManager.cc:57 rc.cpp:179
-msgid "Swap Memory"
-msgstr "Vekselminne"
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "Alle prossesser"
 
-#: ksgrd/SensorManager.cc:58
-msgid "Cached Memory"
-msgstr "Hutiglagerminne"
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "Systemprossesser"
 
-#: ksgrd/SensorManager.cc:59
-msgid "Buffered Memory"
-msgstr "Bufferminne"
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "Brukerprossesser"
 
-#: ksgrd/SensorManager.cc:60
-msgid "Used Memory"
-msgstr "Brukt minne"
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "Egne prossesser"
 
-#: ksgrd/SensorManager.cc:61
-msgid "Application Memory"
-msgstr "Programminne"
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "&Tre"
 
-#: ksgrd/SensorManager.cc:62
-msgid "Free Memory"
-msgstr "Ledig minne"
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "&Frisk opp"
 
-#: ksgrd/SensorManager.cc:63
-msgid "Process Count"
-msgstr "Prossessopptelling"
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "&Drep"
 
-#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
-msgid "Process Controller"
-msgstr "Prossesskontroll"
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1: Kjørende prossess"
 
-#: ksgrd/SensorManager.cc:65
-msgid "Disk Throughput"
-msgstr "Diskgjennomgang"
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "Du må velge en prossess først."
 
-#: ksgrd/SensorManager.cc:66
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
 msgid ""
-"_: CPU Load\n"
-"Load"
-msgstr "Last"
-
-#: ksgrd/SensorManager.cc:67
-msgid "Total Accesses"
-msgstr "Totale tilganger"
-
-#: ksgrd/SensorManager.cc:68
-msgid "Read Accesses"
-msgstr "Lese-tilganger"
-
-#: ksgrd/SensorManager.cc:69
-msgid "Write Accesses"
-msgstr "Skrive-tilganger"
-
-#: ksgrd/SensorManager.cc:70
-msgid "Read Data"
-msgstr "Lese data"
-
-#: ksgrd/SensorManager.cc:71
-msgid "Write Data"
-msgstr "Skrive data"
-
-#: ksgrd/SensorManager.cc:72
-msgid "Pages In"
-msgstr "Sider inn"
-
-#: ksgrd/SensorManager.cc:73
-msgid "Pages Out"
-msgstr "Sider ut"
-
-#: ksgrd/SensorManager.cc:74
-msgid "Context Switches"
-msgstr "Kontekstbytter"
-
-#: ksgrd/SensorManager.cc:75
-msgid "Network"
-msgstr "Nettverk"
-
-#: ksgrd/SensorManager.cc:76
-msgid "Interfaces"
-msgstr "Grensesnitt"
-
-#: ksgrd/SensorManager.cc:77
-msgid "Receiver"
-msgstr "Mottaker"
-
-#: ksgrd/SensorManager.cc:78
-msgid "Transmitter"
-msgstr "Sender"
-
-#: ksgrd/SensorManager.cc:79
-msgid "Data"
-msgstr "Data"
-
-#: ksgrd/SensorManager.cc:80
-msgid "Compressed Packets"
-msgstr "Komprimerte pakker"
-
-#: ksgrd/SensorManager.cc:81
-msgid "Dropped Packets"
-msgstr "Kasserte pakker"
-
-#: ksgrd/SensorManager.cc:82
-msgid "Errors"
-msgstr "Feil"
-
-#: ksgrd/SensorManager.cc:83
-msgid "FIFO Overruns"
-msgstr "FIFO overløp"
-
-#: ksgrd/SensorManager.cc:84
-msgid "Frame Errors"
-msgstr "Rammefeil"
-
-#: ksgrd/SensorManager.cc:85
-msgid "Multicast"
-msgstr "Flersending"
-
-#: ksgrd/SensorManager.cc:86
-msgid "Packets"
-msgstr "Pakker"
-
-#: ksgrd/SensorManager.cc:87
-msgid "Carrier"
-msgstr "Bærer"
-
-#: ksgrd/SensorManager.cc:88
-msgid "Collisions"
-msgstr "Kollisjoner"
-
-#: ksgrd/SensorManager.cc:89
-msgid "Sockets"
-msgstr "Kontakter"
-
-#: ksgrd/SensorManager.cc:90
-msgid "Total Number"
-msgstr "Totalt antall"
-
-#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
-msgid "Table"
-msgstr "Tabell"
-
-#: ksgrd/SensorManager.cc:92
-msgid "Advanced Power Management"
-msgstr "Avansert energihåndtering"
-
-#: ksgrd/SensorManager.cc:93
-msgid "ACPI"
-msgstr "ACPI"
-
-#: ksgrd/SensorManager.cc:94
-msgid "Thermal Zone"
-msgstr "Temperatursone"
-
-#: ksgrd/SensorManager.cc:95
-msgid "Temperature"
-msgstr "Temperatur"
-
-#: ksgrd/SensorManager.cc:96
-msgid "Fan"
-msgstr "Vifte"
-
-#: ksgrd/SensorManager.cc:97
-msgid "State"
-msgstr "Tilstand"
-
-#: ksgrd/SensorManager.cc:98
-msgid "Battery"
-msgstr "Batteri"
-
-#: ksgrd/SensorManager.cc:99
-msgid "Battery Charge"
-msgstr "Batteriladning"
-
-#: ksgrd/SensorManager.cc:100
-msgid "Battery Usage"
-msgstr "Batteribruk"
-
-#: ksgrd/SensorManager.cc:101
-msgid "Remaining Time"
-msgstr "Tid som gjenstår"
-
-#: ksgrd/SensorManager.cc:102
-msgid "Interrupts"
-msgstr "Avbrudd"
-
-#. i18n: file SystemLoad.sgrd line 10
-#: ksgrd/SensorManager.cc:103 rc.cpp:175
-msgid "Load Average (1 min)"
-msgstr "Gjennomsnittslast (1 min)"
-
-#: ksgrd/SensorManager.cc:104
-msgid "Load Average (5 min)"
-msgstr "Gjennomsnittslast (5 min)"
-
-#: ksgrd/SensorManager.cc:105
-msgid "Load Average (15 min)"
-msgstr "Gjennomsnittslast (15 min)"
-
-#: ksgrd/SensorManager.cc:106
-msgid "Clock Frequency"
-msgstr "Klokkefrekvens"
-
-#: ksgrd/SensorManager.cc:107
-msgid "Hardware Sensors"
-msgstr "Maskinsensorer"
-
-#: ksgrd/SensorManager.cc:108
-msgid "Partition Usage"
-msgstr "Bruk av diskpartisjoner"
-
-#: ksgrd/SensorManager.cc:109
-msgid "Used Space"
-msgstr "Brukt plass"
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr ""
+"Vil du drepe den valgte prosessen?\n"
+"Vil du drepe de valgte %n prosessene?"
 
-#: ksgrd/SensorManager.cc:110
-msgid "Free Space"
-msgstr "Fri plass"
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "Drep prossess"
 
-#: ksgrd/SensorManager.cc:111
-msgid "Fill Level"
-msgstr "Fyllingsgrad"
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "Drep"
 
-#: ksgrd/SensorManager.cc:115
-#, c-format
-msgid "CPU%1"
-msgstr "CPU%1"
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "Ikke spør igjen"
 
-#: ksgrd/SensorManager.cc:117
+#: SensorDisplayLib/ProcessController.cc:344
 #, c-format
-msgid "Disk%1"
-msgstr "Disk%1"
+msgid "Error while attempting to kill process %1."
+msgstr "Feil under forsøk på å drepe prossessen %1."
 
-#: ksgrd/SensorManager.cc:122
+#: SensorDisplayLib/ProcessController.cc:349
 #, c-format
-msgid "Fan%1"
-msgstr "Vifte%1"
+msgid "Insufficient permissions to kill process %1."
+msgstr "Mangler rettigheter for å drepe prossessen %1."
 
-#: ksgrd/SensorManager.cc:124
-#, c-format
-msgid "Temperature%1"
-msgstr "Temperatur%1"
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "Prossessen %1 har allerede forsvunnet."
 
-#: ksgrd/SensorManager.cc:127
-msgid "Total"
-msgstr "Totalt"
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "Ugyldig signal."
 
-#: ksgrd/SensorManager.cc:133
+#: SensorDisplayLib/ProcessController.cc:379
 #, c-format
-msgid "Int%1"
-msgstr "Heltall%1"
-
-#: ksgrd/SensorManager.cc:140
-msgid ""
-"_: the unit 1 per second\n"
-"1/s"
-msgstr "1/s"
-
-#: ksgrd/SensorManager.cc:141
-msgid "kBytes"
-msgstr "kBytes"
-
-#: ksgrd/SensorManager.cc:142
-msgid ""
-"_: the unit minutes\n"
-"min"
-msgstr "min"
-
-#: ksgrd/SensorManager.cc:143
-msgid ""
-"_: the frequency unit\n"
-"MHz"
-msgstr "MHz"
+msgid "Error while attempting to renice process %1."
+msgstr "Feil ved forsøk på å endre snillverdi på prosessen %1."
 
-#: ksgrd/SensorManager.cc:146
-msgid "Integer Value"
-msgstr "Heltallsverdi"
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "Mangler rettigheter for å endre snillverdi på prosessen %1."
 
-#: ksgrd/SensorManager.cc:147
-msgid "Floating Point Value"
-msgstr "Flyttallsverdi"
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "Ugyldig argument."
 
-#: ksgrd/SensorManager.cc:289
-msgid "Connection to %1 has been lost."
-msgstr "Forbindelsen til %1 er brutt."
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "Kan ikke koble til «%1»."
 
-#: ksgrd/SensorSocketAgent.cc:104
-msgid "Connection to %1 refused"
-msgstr "Forbindelse til %1 ble avvist"
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "Start &systemvakt"
 
-#: ksgrd/SensorSocketAgent.cc:108
-msgid "Host %1 not found"
-msgstr "Vert %1 ikke funnet"
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "&Egenskaper"
 
-#: ksgrd/SensorSocketAgent.cc:112
-#, c-format
-msgid "Timeout at host %1"
-msgstr "Tidsavbrudd ved verten %1"
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "&Fjern visning"
 
-#: ksgrd/SensorSocketAgent.cc:116
-#, c-format
-msgid "Network failure host %1"
-msgstr "Nettverksfeil ved verten %1"
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "&Tilpass oppdateringsintervall …"
 
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Øystein Skadsem"
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "&Fortsett oppdatering"
 
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "oskadsem@start.no"
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "&Pause i oppdatering"
 
-#: Workspace.cc:53
+#: SensorDisplayLib/SensorDisplay.cc:240
 msgid ""
-"This is your work space. It holds your worksheets. You need to create a new "
-"worksheet (Menu File->New) before you can drag sensors here."
+"<qt>"
+"<p>This is a sensor display. To customize a sensor display click and hold the "
+"right mouse button on either the frame or the display box and select the <i>"
+"Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
 msgstr ""
-"Dette er ditt arbeidsområde. Det inneholder arbeidsarkene dine. Du må lage et "
-"nytt arbeidsark (Meny->Fil->Ny) før du kan dra sensorer hit."
-
-#: Workspace.cc:105 ksysguard.cc:176
-msgid "Process Table"
-msgstr "Prosesstabell"
+"<qt>"
+"<p> Dette er en sensor-visning. For å tilpasse en sensorvisning, klikk og hold "
+"høyre museknapp over enten ramma eller visningsboksen og velg </>Egenskaper</i> "
+"fra menyen. Velg <i>Fjern</i> for å fjerne visningen fra arbeidsarket.</p>"
+"%1</qt>"
 
-#: Workspace.cc:135
-#, c-format
-msgid "Sheet %1"
-msgstr "Ark %1"
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "Slipp sensor her"
 
-#: Workspace.cc:165 Workspace.cc:305
+#: SensorDisplayLib/DummyDisplay.cc:38
 msgid ""
-"The worksheet '%1' contains unsaved data.\n"
-"Do you want to save the worksheet?"
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor the "
+"values of the sensor over time."
 msgstr ""
-"Arbeidsarket «%1» inneholder ulagrede data.\n"
-"Vil du lagre arbeidsarket?"
+"Dette er et tomrom i et arbeidsark. Dra en sensor fra sensorleseren og slipp "
+"den her. Da dukker det opp en sensorvisning som du kan bruke til å kontrollere "
+"sensorens verdier over tid."
 
-#: Workspace.cc:181 Workspace.cc:235
-msgid "*.sgrd|Sensor Files"
-msgstr "*.sgrd|Sensorfiler"
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "Innstillinger for sensorlogger"
 
-#: Workspace.cc:184
-msgid "Select Worksheet to Load"
-msgstr "Velg et arbeidsark å hente inn"
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "Logging"
 
-#: Workspace.cc:229 Workspace.cc:269
-msgid "You do not have a worksheet that could be saved."
-msgstr "Du har ikke noe arbeidsark som kan lagres."
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
+#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:129
+#, no-c-format
+msgid "Timer Interval"
+msgstr "Tidsgrenseintervall"
 
-#: Workspace.cc:239
-msgid "Save Current Worksheet As"
-msgstr "Lagre gjeldende arbeidsark som"
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "Sensornavn"
 
-#: Workspace.cc:320
-msgid "There are no worksheets that could be deleted."
-msgstr "Det er ingen arbeidsark som kunne slettes."
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "Vertsnavn"
 
-#: Workspace.cc:448
-msgid "Cannot find file ProcessTable.sgrd."
-msgstr "Finner ikke fila ProcessTable.sgrd."
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "Loggfil"
 
-#: KSGAppletSettings.cc:34
-msgid "System Guard Settings"
-msgstr "Innstillinger for System Guard"
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "Sensorlogger"
 
-#: KSGAppletSettings.cc:42
-msgid "Number of displays:"
-msgstr "Antall visninger:"
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "&Fjern sensor"
 
-#: KSGAppletSettings.cc:50
-msgid "Size ratio:"
-msgstr "Størrelsesforhold:"
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "&Rediger sensor …"
 
-#: KSGAppletSettings.cc:54
-#, c-format
-msgid "%"
-msgstr "%"
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "St&opp logging"
+
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "S&tart logging"
 
 #: SensorDisplayLib/ProcessList.cc:110
 msgid ""
@@ -690,132 +364,127 @@ msgid ""
 "idle"
 msgstr "inaktiv"
 
-#: SensorDisplayLib/ProcessList.cc:250
+#: SensorDisplayLib/ProcessList.cc:252
 msgid "Remove Column"
 msgstr "Fjern kolonne"
 
-#: SensorDisplayLib/ProcessList.cc:251
+#: SensorDisplayLib/ProcessList.cc:253
 msgid "Add Column"
 msgstr "Legg til kolonne"
 
-#: SensorDisplayLib/ProcessList.cc:252
+#: SensorDisplayLib/ProcessList.cc:254
 msgid "Help on Column"
 msgstr "Hjelp om kolonne"
 
-#: SensorDisplayLib/ProcessController.cc:62
-#: SensorDisplayLib/ProcessList.cc:771
-msgid "Nice"
-msgstr "Snill"
-
-#: SensorDisplayLib/ProcessList.cc:776
+#: SensorDisplayLib/ProcessList.cc:781
 msgid "Hide Column"
 msgstr "Skjul kolonne"
 
-#: SensorDisplayLib/ProcessList.cc:782
+#: SensorDisplayLib/ProcessList.cc:787
 msgid "Show Column"
 msgstr "Vis kolonne"
 
-#: SensorDisplayLib/ProcessList.cc:786
+#: SensorDisplayLib/ProcessList.cc:791
 msgid "Select All Processes"
 msgstr "Merk alle prosesser"
 
-#: SensorDisplayLib/ProcessList.cc:787
+#: SensorDisplayLib/ProcessList.cc:792
 msgid "Unselect All Processes"
 msgstr "Avmerk alle prosesser"
 
-#: SensorDisplayLib/ProcessList.cc:793
+#: SensorDisplayLib/ProcessList.cc:798
 msgid "Select All Child Processes"
 msgstr "Merk alle barneprosesser"
 
-#: SensorDisplayLib/ProcessList.cc:794
+#: SensorDisplayLib/ProcessList.cc:799
 msgid "Unselect All Child Processes"
 msgstr "Avmerk alle barneprosesser"
 
-#: SensorDisplayLib/ProcessList.cc:796
+#: SensorDisplayLib/ProcessList.cc:801
 msgid "SIGABRT"
 msgstr "SIGABRT"
 
-#: SensorDisplayLib/ProcessList.cc:797
+#: SensorDisplayLib/ProcessList.cc:802
 msgid "SIGALRM"
 msgstr "SIGALRM"
 
-#: SensorDisplayLib/ProcessList.cc:798
+#: SensorDisplayLib/ProcessList.cc:803
 msgid "SIGCHLD"
 msgstr "SIGCHLD"
 
-#: SensorDisplayLib/ProcessList.cc:799
+#: SensorDisplayLib/ProcessList.cc:804
 msgid "SIGCONT"
 msgstr "SIGCONT"
 
-#: SensorDisplayLib/ProcessList.cc:800
+#: SensorDisplayLib/ProcessList.cc:805
 msgid "SIGFPE"
 msgstr "SIGFPE"
 
-#: SensorDisplayLib/ProcessList.cc:801
+#: SensorDisplayLib/ProcessList.cc:806
 msgid "SIGHUP"
 msgstr "SIGHUP"
 
-#: SensorDisplayLib/ProcessList.cc:802
+#: SensorDisplayLib/ProcessList.cc:807
 msgid "SIGILL"
 msgstr "SIGILL"
 
-#: SensorDisplayLib/ProcessList.cc:803
+#: SensorDisplayLib/ProcessList.cc:808
 msgid "SIGINT"
 msgstr "SIGINT"
 
-#: SensorDisplayLib/ProcessList.cc:804
+#: SensorDisplayLib/ProcessList.cc:809
 msgid "SIGKILL"
 msgstr "SIGKILL"
 
-#: SensorDisplayLib/ProcessList.cc:805
+#: SensorDisplayLib/ProcessList.cc:810
 msgid "SIGPIPE"
 msgstr "SIGPIPE"
 
-#: SensorDisplayLib/ProcessList.cc:806
+#: SensorDisplayLib/ProcessList.cc:811
 msgid "SIGQUIT"
 msgstr "SIGQUIT"
 
-#: SensorDisplayLib/ProcessList.cc:807
+#: SensorDisplayLib/ProcessList.cc:812
 msgid "SIGSEGV"
 msgstr "SIGSEGV"
 
-#: SensorDisplayLib/ProcessList.cc:808
+#: SensorDisplayLib/ProcessList.cc:813
 msgid "SIGSTOP"
 msgstr "SIGSTOP"
 
-#: SensorDisplayLib/ProcessList.cc:809
+#: SensorDisplayLib/ProcessList.cc:814
 msgid "SIGTERM"
 msgstr "SIGTERM"
 
-#: SensorDisplayLib/ProcessList.cc:810
+#: SensorDisplayLib/ProcessList.cc:815
 msgid "SIGTSTP"
 msgstr "SIGTSTP"
 
-#: SensorDisplayLib/ProcessList.cc:811
+#: SensorDisplayLib/ProcessList.cc:816
 msgid "SIGTTIN"
 msgstr "SIGTTIN"
 
-#: SensorDisplayLib/ProcessList.cc:812
+#: SensorDisplayLib/ProcessList.cc:817
 msgid "SIGTTOU"
 msgstr "SIGTTOU"
 
-#: SensorDisplayLib/ProcessList.cc:813
+#: SensorDisplayLib/ProcessList.cc:818
 msgid "SIGUSR1"
 msgstr "SIGUSR1"
 
-#: SensorDisplayLib/ProcessList.cc:814
+#: SensorDisplayLib/ProcessList.cc:819
 msgid "SIGUSR2"
 msgstr "SIGUSR2"
 
-#: SensorDisplayLib/ProcessList.cc:817
+#: SensorDisplayLib/ProcessList.cc:822
 msgid "Send Signal"
 msgstr "Send signal"
 
-#: SensorDisplayLib/ProcessList.cc:825
+#: SensorDisplayLib/ProcessList.cc:830
 msgid "Renice Process..."
 msgstr "Endre prioritetsverdi på Prosess …"
 
-#: SensorDisplayLib/ProcessList.cc:873
+#: SensorDisplayLib/ProcessList.cc:878
 msgid ""
 "_n: Do you really want to send signal %1 to the selected process?\n"
 "Do you really want to send signal %1 to the %n selected processes?"
@@ -823,10 +492,42 @@ msgstr ""
 "Vil du virkelig sende signal %1 til den valgte prosessen?\n"
 "Vil du virkelig sende signal %1 til de %n valgte prosessene?"
 
-#: SensorDisplayLib/ProcessList.cc:877
+#: SensorDisplayLib/ProcessList.cc:882
 msgid "Send"
 msgstr "Send"
 
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "Endre snillverdi på Prosess"
+
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+"Du skal til å endre prioriteten for prosess %1. \n"
+"Bemerk at bare superbruker (root) kan senke \n"
+"«snill»-verdien for en prosess. Jo lavere tall, desto\n"
+"høyere prioritet. \n"
+"Skriv inn ønsket «snill»-verdi:"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
+#: SensorDisplayLib/LogFile.cc:88 rc.cpp:27
+#, no-c-format
+msgid "Foreground color:"
+msgstr "Forgrunnsfarge:"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 102
+#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
+#: ksgrd/StyleSettings.cc:68 rc.cpp:30 rc.cpp:69 rc.cpp:123 rc.cpp:171
+#, no-c-format
+msgid "Background color:"
+msgstr "Bakgrunnsfarge:"
+
 #: SensorDisplayLib/DancingBarsSettings.cc:43
 msgid "Edit BarGraph Preferences"
 msgstr "Endre innstillingene for stolpediagram"
@@ -835,16 +536,16 @@ msgstr "Endre innstillingene for stolpediagram"
 msgid "Range"
 msgstr "Område"
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 46
 #: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
-#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
+#: rc.cpp:21 rc.cpp:60 rc.cpp:75 rc.cpp:159
 #, no-c-format
 msgid "Title"
 msgstr "Tittel"
 
 #. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
 #: SensorDisplayLib/DancingBarsSettings.cc:54
-#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
+#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:78
 #, no-c-format
 msgid "Enter the title of the display here."
 msgstr "Skriv tittelen på ruta her."
@@ -882,13 +583,13 @@ msgstr ""
 "automatisk områdesjekk tatt i bruk."
 
 #. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
-#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
+#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:87
 #, no-c-format
 msgid "Alarms"
 msgstr "Alarmer"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
-#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 138
+#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:102 rc.cpp:135
 #, no-c-format
 msgid "Alarm for Minimum Value"
 msgstr "Alarm ved minimumverdi"
@@ -898,32 +599,32 @@ msgstr "Alarm ved minimumverdi"
 msgid "Enable alarm"
 msgstr "Skru på alarm"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
-#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 152
+#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:108 rc.cpp:141
 #, no-c-format
 msgid "Enable the minimum value alarm."
 msgstr "Skru på alarmen for minimum verdi."
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
-#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 180
+#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:111 rc.cpp:144
 #, no-c-format
 msgid "Lower limit:"
 msgstr "Nedre grense:"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
-#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 72
+#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:90 rc.cpp:147
 #, no-c-format
 msgid "Alarm for Maximum Value"
 msgstr "Alarm ved maksimumsverdi"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
-#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 86
+#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:96 rc.cpp:153
 #, no-c-format
 msgid "Enable the maximum value alarm."
 msgstr "Skru på alarm for maksimumsverdi."
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
-#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 114
+#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:99 rc.cpp:156
 #, no-c-format
 msgid "Upper limit:"
 msgstr "Øvre grense:"
@@ -940,6 +641,11 @@ msgstr "Normal linelinjefarge:"
 msgid "Out-of-range color:"
 msgstr "Farge for verdi utenfor grensene:"
 
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "Skriftstørrelse:"
+
 #: SensorDisplayLib/DancingBarsSettings.cc:154
 msgid ""
 "This determines the size of the font used to print a label underneath the bars. "
@@ -974,12 +680,6 @@ msgstr "Etikett"
 msgid "Unit"
 msgstr "Enhet"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:170
-#: SensorDisplayLib/FancyPlotterSettings.cc:234
-#: SensorDisplayLib/ProcessController.cc:59
-msgid "Status"
-msgstr "Status"
-
 #: SensorDisplayLib/DancingBarsSettings.cc:174
 msgid "Edit..."
 msgstr "Rediger …"
@@ -1102,7 +802,7 @@ msgid "Enter the number of horizontal lines here."
 msgstr "Skriv inn antall vannrette linjer her."
 
 #. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
-#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
+#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:18
 #, no-c-format
 msgid "Text"
 msgstr "Tekst"
@@ -1131,9 +831,9 @@ msgstr ""
 "Kryss av her for å slå på tittellinja. Dette er antakelig bare nyttig for "
 "applet-visninger. Titellinja synes bare dersom visningsvinduet er stort nok."
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
-#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
-#: rc.cpp:117 rc.cpp:138
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 64
+#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:24 rc.cpp:63 rc.cpp:114
+#: rc.cpp:162
 #, no-c-format
 msgid "Colors"
 msgstr "Farger"
@@ -1166,408 +866,636 @@ msgstr "Flytt opp"
 msgid "Move Down"
 msgstr "Flytt ned"
 
-#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
-msgid "Sensor Logger"
-msgstr "Sensorlogger"
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "Innstillinger for listevisning"
 
-#: SensorDisplayLib/SensorDisplay.cc:162
-msgid "Launch &System Guard"
-msgstr "Start &systemvakt"
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "Innstillinger for System Guard"
 
-#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
-msgid "&Properties"
-msgstr "&Egenskaper"
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "Antall visninger:"
 
-#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
-msgid "&Remove Display"
-msgstr "&Fjern visning"
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "Størrelsesforhold:"
 
-#: SensorDisplayLib/SensorDisplay.cc:169
-msgid "&Setup Update Interval..."
-msgstr "&Tilpass oppdateringsintervall …"
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
 
-#: SensorDisplayLib/SensorDisplay.cc:171
-msgid "&Continue Update"
-msgstr "&Fortsett oppdatering"
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "Oppdateringsintervall:"
 
-#: SensorDisplayLib/SensorDisplay.cc:173
-msgid "P&ause Update"
-msgstr "&Pause i oppdatering"
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
+#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#: rc.cpp:132
+#, no-c-format
+msgid " sec"
+msgstr " sek"
 
-#: SensorDisplayLib/SensorDisplay.cc:240
+#: WorkSheet.cc:109
 msgid ""
-"<qt>"
-"<p>This is a sensor display. To customize a sensor display click and hold the "
-"right mouse button on either the frame or the display box and select the <i>"
-"Properties</i> entry from the popup menu. Select <i>Remove</i> "
-"to delete the display from the worksheet.</p>%1</qt>"
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
 msgstr ""
-"<qt>"
-"<p> Dette er en sensor-visning. For å tilpasse en sensorvisning, klikk og hold "
-"høyre museknapp over enten ramma eller visningsboksen og velg </>Egenskaper</i> "
-"fra menyen. Velg <i>Fjern</i> for å fjerne visningen fra arbeidsarket.</p>"
-"%1</qt>"
+"Fila %1 inneholder ikke en gyldig definisjon på et arbeidsark, som må ha  "
+"dokumenttype «KSysGuardWorkSheet»."
 
-#: SensorDisplayLib/SensorLogger.cc:136
-msgid "Logging"
-msgstr "Logging"
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "Ugyldig størrelse på arbeidsark i fil %1."
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
-#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "Utklippsboka inneholder ikke en gyldig visningsbeskrivelse."
+
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "&Stolpediagram"
+
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "S&ensorlogger"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
+#: rc.cpp:15
 #, no-c-format
-msgid "Timer Interval"
-msgstr "Tidsgrenseintervall"
+msgid "Log File Settings"
+msgstr "Innstillinger for loggfil"
 
-#: SensorDisplayLib/SensorLogger.cc:138
-msgid "Sensor Name"
-msgstr "Sensornavn"
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
+#: rc.cpp:36
+#, no-c-format
+msgid "Select Font..."
+msgstr "Velg skrifttype …"
 
-#: SensorDisplayLib/SensorLogger.cc:139
-msgid "Host Name"
-msgstr "Vertsnavn"
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
+#: rc.cpp:39
+#, no-c-format
+msgid "Filter"
+msgstr "Filter"
 
-#: SensorDisplayLib/SensorLogger.cc:140
-msgid "Log File"
-msgstr "Loggfil"
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
+#: rc.cpp:42
+#, no-c-format
+msgid "&Add"
+msgstr "&Legg til"
 
-#: SensorDisplayLib/SensorLogger.cc:383
-msgid "&Remove Sensor"
-msgstr "&Fjern sensor"
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
+#: rc.cpp:48
+#, no-c-format
+msgid "&Change"
+msgstr "&Endre"
 
-#: SensorDisplayLib/SensorLogger.cc:384
-msgid "&Edit Sensor..."
-msgstr "&Rediger sensor …"
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 91
+#: rc.cpp:66 rc.cpp:165
+#, no-c-format
+msgid "Text color:"
+msgstr "Tekstfarge:"
 
-#: SensorDisplayLib/SensorLogger.cc:396
-msgid "St&op Logging"
-msgstr "St&opp logging"
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
+#: ksgrd/StyleSettings.cc:61 rc.cpp:72
+#, no-c-format
+msgid "Alarm color:"
+msgstr "Alarmfarge:"
 
-#: SensorDisplayLib/SensorLogger.cc:398
-msgid "S&tart Logging"
-msgstr "S&tart logging"
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
+#: rc.cpp:81
+#, no-c-format
+msgid "&Show unit"
+msgstr "&Vis enhet"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
-#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
+#: rc.cpp:84
 #, no-c-format
-msgid "Foreground color:"
-msgstr "Forgrunnsfarge:"
+msgid "Enable this to append the unit to the title of the display."
+msgstr "Velg denne for å legge til enheten som tittel på visningen."
 
-#: SensorDisplayLib/MultiMeterSettings.cc:26
-msgid "Multimeter Settings"
-msgstr "Multimeter-innstillinger"
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 83
+#: rc.cpp:93 rc.cpp:150
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "S&lå på alarm"
 
-#: SensorDisplayLib/ListViewSettings.cc:26
-msgid "List View Settings"
-msgstr "Innstillinger for listevisning"
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 149
+#: rc.cpp:105 rc.cpp:138
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "&Slå på alarm"
 
-#: SensorDisplayLib/ReniceDlg.cc:32
-msgid "Renice Process"
-msgstr "Endre snillverdi på Prosess"
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
+#: rc.cpp:117
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "Normal nummerfarge:"
 
-#: SensorDisplayLib/ReniceDlg.cc:40
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
+#: rc.cpp:120
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "Nummerfarge ved alarm:"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
+#: rc.cpp:168
+#, no-c-format
+msgid "Grid color:"
+msgstr "Rutefarge:"
+
+#. i18n: file SystemLoad.sgrd line 5
+#: ksgrd/SensorManager.cc:50 rc.cpp:173
+msgid "CPU Load"
+msgstr "CPUlast"
+
+#. i18n: file SystemLoad.sgrd line 10
+#: ksgrd/SensorManager.cc:103 rc.cpp:175
+msgid "Load Average (1 min)"
+msgstr "Gjennomsnittslast (1 min)"
+
+#. i18n: file SystemLoad.sgrd line 13
+#: ksgrd/SensorManager.cc:56 rc.cpp:177
+msgid "Physical Memory"
+msgstr "Fysisk minne"
+
+#. i18n: file SystemLoad.sgrd line 21
+#: ksgrd/SensorManager.cc:57 rc.cpp:179
+msgid "Swap Memory"
+msgstr "Vekselminne"
+
+#. i18n: file KSysGuardApplet.xml line 5
+#: rc.cpp:181
+msgid "CPU"
+msgstr "Prosessor"
+
+#. i18n: file KSysGuardApplet.xml line 10
+#: rc.cpp:183
+msgid "Mem"
+msgstr "Minne"
+
+#: _translatorinfo.cpp:1
 msgid ""
-"You are about to change the scheduling priority of\n"
-"process %1. Be aware that only the Superuser (root)\n"
-"can decrease the nice level of a process. The lower\n"
-"the number is the higher the priority.\n"
-"\n"
-"Please enter the desired nice level:"
-msgstr ""
-"Du skal til å endre prioriteten for prosess %1. \n"
-"Bemerk at bare superbruker (root) kan senke \n"
-"«snill»-verdien for en prosess. Jo lavere tall, desto\n"
-"høyere prioritet. \n"
-"Skriv inn ønsket «snill»-verdi:"
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Øystein Skadsem"
 
-#: SensorDisplayLib/SensorLoggerSettings.cc:26
-msgid "Sensor Logger Settings"
-msgstr "Innstillinger for sensorlogger"
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "oskadsem@start.no"
 
-#: SensorDisplayLib/DummyDisplay.cc:33
-msgid "Drop Sensor Here"
-msgstr "Slipp sensor her"
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "Inaktiv last"
 
-#: SensorDisplayLib/DummyDisplay.cc:38
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
+#: ksysguard.cc:171
+msgid "System Load"
+msgstr "Systemlast"
+
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "Snill-last"
+
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "Brukerlast"
+
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "Minne"
+
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "Hutiglagerminne"
+
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "Bufferminne"
+
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "Brukt minne"
+
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "Programminne"
+
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "Ledig minne"
+
+#: ksgrd/SensorManager.cc:63
+msgid "Process Count"
+msgstr "Prossessopptelling"
+
+#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
+msgid "Process Controller"
+msgstr "Prossesskontroll"
+
+#: ksgrd/SensorManager.cc:65
+msgid "Disk Throughput"
+msgstr "Diskgjennomgang"
+
+#: ksgrd/SensorManager.cc:66
 msgid ""
-"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
-"and drop it here. A sensor display will appear that allows you to monitor the "
-"values of the sensor over time."
-msgstr ""
-"Dette er et tomrom i et arbeidsark. Dra en sensor fra sensorleseren og slipp "
-"den her. Da dukker det opp en sensorvisning som du kan bruke til å kontrollere "
-"sensorens verdier over tid."
+"_: CPU Load\n"
+"Load"
+msgstr "Last"
 
-#: SensorDisplayLib/ProcessController.cc:54
-msgid "Name"
-msgstr "Navn"
+#: ksgrd/SensorManager.cc:67
+msgid "Total Accesses"
+msgstr "Totale tilganger"
 
-#: SensorDisplayLib/ProcessController.cc:55
-msgid "PID"
-msgstr "PID"
+#: ksgrd/SensorManager.cc:68
+msgid "Read Accesses"
+msgstr "Lese-tilganger"
 
-#: SensorDisplayLib/ProcessController.cc:56
-msgid "PPID"
-msgstr "PPID"
+#: ksgrd/SensorManager.cc:69
+msgid "Write Accesses"
+msgstr "Skrive-tilganger"
 
-#: SensorDisplayLib/ProcessController.cc:57
-msgid "UID"
-msgstr "UID"
+#: ksgrd/SensorManager.cc:70
+msgid "Read Data"
+msgstr "Lese data"
 
-#: SensorDisplayLib/ProcessController.cc:58
-msgid "GID"
-msgstr "GID"
+#: ksgrd/SensorManager.cc:71
+msgid "Write Data"
+msgstr "Skrive data"
 
-#: SensorDisplayLib/ProcessController.cc:60
-#, c-format
-msgid "User%"
-msgstr "Bruker%"
+#: ksgrd/SensorManager.cc:72
+msgid "Pages In"
+msgstr "Sider inn"
 
-#: SensorDisplayLib/ProcessController.cc:61
-#, c-format
-msgid "System%"
-msgstr "System%"
+#: ksgrd/SensorManager.cc:73
+msgid "Pages Out"
+msgstr "Sider ut"
 
-#: SensorDisplayLib/ProcessController.cc:63
-msgid "VmSize"
-msgstr "VmSize"
+#: ksgrd/SensorManager.cc:74
+msgid "Context Switches"
+msgstr "Kontekstbytter"
 
-#: SensorDisplayLib/ProcessController.cc:64
-msgid "VmRss"
-msgstr "VmRss"
+#: ksgrd/SensorManager.cc:75
+msgid "Network"
+msgstr "Nettverk"
 
-#: SensorDisplayLib/ProcessController.cc:65
-msgid "Login"
-msgstr "Brukernavn"
+#: ksgrd/SensorManager.cc:76
+msgid "Interfaces"
+msgstr "Grensesnitt"
 
-#: SensorDisplayLib/ProcessController.cc:66
-msgid "Command"
-msgstr "Kommando"
+#: ksgrd/SensorManager.cc:77
+msgid "Receiver"
+msgstr "Mottaker"
 
-#: SensorDisplayLib/ProcessController.cc:97
-msgid "All Processes"
-msgstr "Alle prossesser"
+#: ksgrd/SensorManager.cc:78
+msgid "Transmitter"
+msgstr "Sender"
 
-#: SensorDisplayLib/ProcessController.cc:98
-msgid "System Processes"
-msgstr "Systemprossesser"
+#: ksgrd/SensorManager.cc:79
+msgid "Data"
+msgstr "Data"
 
-#: SensorDisplayLib/ProcessController.cc:99
-msgid "User Processes"
-msgstr "Brukerprossesser"
+#: ksgrd/SensorManager.cc:80
+msgid "Compressed Packets"
+msgstr "Komprimerte pakker"
 
-#: SensorDisplayLib/ProcessController.cc:100
-msgid "Own Processes"
-msgstr "Egne prossesser"
+#: ksgrd/SensorManager.cc:81
+msgid "Dropped Packets"
+msgstr "Kasserte pakker"
 
-#: SensorDisplayLib/ProcessController.cc:103
-msgid "&Tree"
-msgstr "&Tre"
+#: ksgrd/SensorManager.cc:82
+msgid "Errors"
+msgstr "Feil"
 
-#: SensorDisplayLib/ProcessController.cc:116
-msgid "&Refresh"
-msgstr "&Frisk opp"
+#: ksgrd/SensorManager.cc:83
+msgid "FIFO Overruns"
+msgstr "FIFO overløp"
 
-#: SensorDisplayLib/ProcessController.cc:123
-msgid "&Kill"
-msgstr "&Drep"
+#: ksgrd/SensorManager.cc:84
+msgid "Frame Errors"
+msgstr "Rammefeil"
 
-#: SensorDisplayLib/ProcessController.cc:206
-msgid "%1: Running Processes"
-msgstr "%1: Kjørende prossess"
+#: ksgrd/SensorManager.cc:85
+msgid "Multicast"
+msgstr "Flersending"
 
-#: SensorDisplayLib/ProcessController.cc:239
-msgid "You need to select a process first."
-msgstr "Du må velge en prossess først."
+#: ksgrd/SensorManager.cc:86
+msgid "Packets"
+msgstr "Pakker"
 
-#: SensorDisplayLib/ProcessController.cc:245
-#, c-format
-msgid ""
-"_n: Do you want to kill the selected process?\n"
-"Do you want to kill the %n selected processes?"
-msgstr ""
-"Vil du drepe den valgte prosessen?\n"
-"Vil du drepe de valgte %n prosessene?"
+#: ksgrd/SensorManager.cc:87
+msgid "Carrier"
+msgstr "Bærer"
 
-#: SensorDisplayLib/ProcessController.cc:248
-msgid "Kill Process"
-msgstr "Drep prossess"
+#: ksgrd/SensorManager.cc:88
+msgid "Collisions"
+msgstr "Kollisjoner"
 
-#: SensorDisplayLib/ProcessController.cc:252
-msgid "Kill"
-msgstr "Drep"
+#: ksgrd/SensorManager.cc:89
+msgid "Sockets"
+msgstr "Kontakter"
 
-#: SensorDisplayLib/ProcessController.cc:258
-msgid "Do not ask again"
-msgstr "Ikke spør igjen"
+#: ksgrd/SensorManager.cc:90
+msgid "Total Number"
+msgstr "Totalt antall"
 
-#: SensorDisplayLib/ProcessController.cc:344
-#, c-format
-msgid "Error while attempting to kill process %1."
-msgstr "Feil under forsøk på å drepe prossessen %1."
+#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
+msgid "Table"
+msgstr "Tabell"
 
-#: SensorDisplayLib/ProcessController.cc:349
+#: ksgrd/SensorManager.cc:92
+msgid "Advanced Power Management"
+msgstr "Avansert energihåndtering"
+
+#: ksgrd/SensorManager.cc:93
+msgid "ACPI"
+msgstr "ACPI"
+
+#: ksgrd/SensorManager.cc:94
+msgid "Thermal Zone"
+msgstr "Temperatursone"
+
+#: ksgrd/SensorManager.cc:95
+msgid "Temperature"
+msgstr "Temperatur"
+
+#: ksgrd/SensorManager.cc:96
+msgid "Fan"
+msgstr "Vifte"
+
+#: ksgrd/SensorManager.cc:97
+msgid "State"
+msgstr "Tilstand"
+
+#: ksgrd/SensorManager.cc:98
+msgid "Battery"
+msgstr "Batteri"
+
+#: ksgrd/SensorManager.cc:99
+msgid "Battery Charge"
+msgstr "Batteriladning"
+
+#: ksgrd/SensorManager.cc:100
+msgid "Battery Usage"
+msgstr "Batteribruk"
+
+#: ksgrd/SensorManager.cc:101
+msgid "Remaining Time"
+msgstr "Tid som gjenstår"
+
+#: ksgrd/SensorManager.cc:102
+msgid "Interrupts"
+msgstr "Avbrudd"
+
+#: ksgrd/SensorManager.cc:104
+msgid "Load Average (5 min)"
+msgstr "Gjennomsnittslast (5 min)"
+
+#: ksgrd/SensorManager.cc:105
+msgid "Load Average (15 min)"
+msgstr "Gjennomsnittslast (15 min)"
+
+#: ksgrd/SensorManager.cc:106
+msgid "Clock Frequency"
+msgstr "Klokkefrekvens"
+
+#: ksgrd/SensorManager.cc:107
+msgid "Hardware Sensors"
+msgstr "Maskinsensorer"
+
+#: ksgrd/SensorManager.cc:108
+msgid "Partition Usage"
+msgstr "Bruk av diskpartisjoner"
+
+#: ksgrd/SensorManager.cc:109
+msgid "Used Space"
+msgstr "Brukt plass"
+
+#: ksgrd/SensorManager.cc:110
+msgid "Free Space"
+msgstr "Fri plass"
+
+#: ksgrd/SensorManager.cc:111
+msgid "Fill Level"
+msgstr "Fyllingsgrad"
+
+#: ksgrd/SensorManager.cc:115
 #, c-format
-msgid "Insufficient permissions to kill process %1."
-msgstr "Mangler rettigheter for å drepe prossessen %1."
+msgid "CPU%1"
+msgstr "CPU%1"
 
-#: SensorDisplayLib/ProcessController.cc:354
-#: SensorDisplayLib/ProcessController.cc:389
-msgid "Process %1 has already disappeared."
-msgstr "Prossessen %1 har allerede forsvunnet."
+#: ksgrd/SensorManager.cc:117
+#, c-format
+msgid "Disk%1"
+msgstr "Disk%1"
 
-#: SensorDisplayLib/ProcessController.cc:358
-msgid "Invalid Signal."
-msgstr "Ugyldig signal."
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Fan%1"
+msgstr "Vifte%1"
 
-#: SensorDisplayLib/ProcessController.cc:379
+#: ksgrd/SensorManager.cc:124
 #, c-format
-msgid "Error while attempting to renice process %1."
-msgstr "Feil ved forsøk på å endre snillverdi på prosessen %1."
+msgid "Temperature%1"
+msgstr "Temperatur%1"
 
-#: SensorDisplayLib/ProcessController.cc:384
+#: ksgrd/SensorManager.cc:127
+msgid "Total"
+msgstr "Totalt"
+
+#: ksgrd/SensorManager.cc:133
 #, c-format
-msgid "Insufficient permissions to renice process %1."
-msgstr "Mangler rettigheter for å endre snillverdi på prosessen %1."
+msgid "Int%1"
+msgstr "Heltall%1"
 
-#: SensorDisplayLib/ProcessController.cc:393
-msgid "Invalid argument."
-msgstr "Ugyldig argument."
+#: ksgrd/SensorManager.cc:140
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/s"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
-#: rc.cpp:27 rc.cpp:78
-#, no-c-format
-msgid "&Enable alarm"
-msgstr "&Slå på alarm"
+#: ksgrd/SensorManager.cc:141
+msgid "kBytes"
+msgstr "kBytes"
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
-#: rc.cpp:39 rc.cpp:66
-#, no-c-format
-msgid "E&nable alarm"
-msgstr "S&lå på alarm"
+#: ksgrd/SensorManager.cc:142
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "min"
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
-#: rc.cpp:54
-#, no-c-format
-msgid "&Show unit"
-msgstr "&Vis enhet"
+#: ksgrd/SensorManager.cc:143
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
-#: rc.cpp:57
-#, no-c-format
-msgid "Enable this to append the unit to the title of the display."
-msgstr "Velg denne for å legge til enheten som tittel på visningen."
+#: ksgrd/SensorManager.cc:146
+msgid "Integer Value"
+msgstr "Heltallsverdi"
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
-#: rc.cpp:90
-#, no-c-format
-msgid "Normal digit color:"
-msgstr "Normal nummerfarge:"
+#: ksgrd/SensorManager.cc:147
+msgid "Floating Point Value"
+msgstr "Flyttallsverdi"
 
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
-#: rc.cpp:93
-#, no-c-format
-msgid "Alarm digit color:"
-msgstr "Nummerfarge ved alarm:"
+#: ksgrd/SensorManager.cc:289
+msgid "Connection to %1 has been lost."
+msgstr "Forbindelsen til %1 er brutt."
 
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
-#: rc.cpp:105 rc.cpp:120
-#, no-c-format
-msgid "Text color:"
-msgstr "Tekstfarge:"
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "Standard stilinnstillinger"
 
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
-#: rc.cpp:108
-#, no-c-format
-msgid "Grid color:"
-msgstr "Rutefarge:"
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "Visningsstil"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
-#: rc.cpp:129
-#, no-c-format
-msgid "Log File Settings"
-msgstr "Innstillinger for loggfil"
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "Første forgrunnsfarge:"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
-#: rc.cpp:150
-#, no-c-format
-msgid "Select Font..."
-msgstr "Velg skrifttype …"
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "Andre forgrunnsfarge:"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
-#: rc.cpp:153
-#, no-c-format
-msgid "Filter"
-msgstr "Filter"
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "Sensorfarge"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
-#: rc.cpp:156
-#, no-c-format
-msgid "&Add"
-msgstr "&Legg til"
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "Endre farge …"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
-#: rc.cpp:162
-#, no-c-format
-msgid "&Change"
-msgstr "&Endre"
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "Farge %1"
 
-#. i18n: file KSysGuardApplet.xml line 5
-#: rc.cpp:181
-msgid "CPU"
-msgstr "Prosessor"
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "Forbindelse til %1 ble avvist"
 
-#. i18n: file KSysGuardApplet.xml line 10
-#: rc.cpp:183
-msgid "Mem"
-msgstr "Minne"
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "Vert %1 ikke funnet"
 
-#: WorkSheetSettings.cc:41
-msgid "Worksheet Properties"
-msgstr "Innstillinger for arbeidsark"
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "Tidsavbrudd ved verten %1"
 
-#: WorkSheetSettings.cc:67
-msgid "Rows:"
-msgstr "Rader:"
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "Nettverksfeil ved verten %1"
 
-#: WorkSheetSettings.cc:76
-msgid "Columns:"
-msgstr "Kolonner:"
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "Innstillinger for tidtager"
 
-#: WorkSheetSettings.cc:97
-msgid "Enter the number of rows the sheet should have."
-msgstr "Skriv inn her antall rader arket skal ha."
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "Bruk oppdateringsintervallet til arbeidsarket"
 
-#: WorkSheetSettings.cc:98
-msgid "Enter the number of columns the sheet should have."
-msgstr "Skriv inn her antall kolonner arket skal ha."
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr "Alle visninger av arket blir oppdaterte i den farten angitt her."
 
-#: WorkSheetSettings.cc:100
-msgid "Enter the title of the worksheet here."
-msgstr "Skriv tittelen på arbeidsarket."
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "Tilkoblingsvert"
 
-#: KSysGuardApplet.cc:212
-msgid "&Dancing Bars"
-msgstr "&Dansende stolper"
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "Vert:"
 
-#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "Skriv inn navnet på verten du vil koble deg til."
+
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "Tilkoblingstype"
+
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
+
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr "Velg denne for å bruke ssh («secure shell») for å logge deg på verten."
+
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
+
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr ""
+"Velg denne for å bruke rsh («remote shell») for å koble deg til verten."
+
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "Daemon"
+
+#: ksgrd/HostConnector.cc:77
 msgid ""
-"The KSysGuard applet does not support displaying of this type of sensor. Please "
-"choose another sensor."
+"Select this if you want to connect to a ksysguard daemon that is running on the "
+"machine you want to connect to, and is listening for client requests."
 msgstr ""
-"Systemvakt-appleten støtter ikke visning av denne sensortypen. Velg en annen "
-"sensor."
+"Velg denne hvis du vil koble deg til en ksysguard-daemon som kjører på maskinen "
+"du kobler deg til, og lytter etter forespørsler fra klienter."
 
-#: KSysGuardApplet.cc:334
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "Selvvalgt kommando"
+
+#: ksgrd/HostConnector.cc:81
 msgid ""
-"The file %1 does not contain a valid applet definition, which must have a "
-"document type 'KSysGuardApplet'."
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
 msgstr ""
-"Fila %1 inneholder ikke en gyldig applett-definisjon, som må ha dokumenttypen\n"
-"'KSysGuardApplet'."
+"Velg denne for å bruke kommandoen du skrev inn under for å starte ksysguardd på "
+"verten."
 
-#: KSysGuardApplet.cc:488
-msgid "Drag sensors from the TDE System Guard into this cell."
-msgstr "Dra sensorer fra TDE systemvakt til denne ruten."
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "Port:"
+
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr ""
+"Skriv inn portnummeret som ksysguard-demonen lytter etter tilkoblinger på."
+
+#: ksgrd/HostConnector.cc:93
+msgid "e.g.  3112"
+msgstr "f.eks  3112"
+
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "Kommando:"
+
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr "Skriv inn kommandoen som kjører ksysguardd på verten du vil overvåke."
+
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "f.eks. ssh -l root en.vert.no ksysguardd"
+
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"Beskjed fra %1:\n"
+"%2"
 
 #: SensorBrowser.cc:77
 msgid "Sensor Browser"
@@ -1599,6 +1527,30 @@ msgstr ""
 msgid "Drag sensors to empty fields in a worksheet."
 msgstr "Dra sensorer til tomme felt i et arbeidsark."
 
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "Innstillinger for arbeidsark"
+
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "Rader:"
+
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "Kolonner:"
+
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "Skriv inn her antall rader arket skal ha."
+
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "Skriv inn her antall kolonner arket skal ha."
+
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "Skriv tittelen på arbeidsarket."
+
 #: ksysguard.cc:64
 msgid "TDE system guard"
 msgstr "TDE systemvakt"
@@ -1671,6 +1623,10 @@ msgstr "Nullstill alle arbeidsark"
 msgid "Reset"
 msgstr "Tilbakestill"
 
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "Prosesstabell"
+
 #: ksysguard.cc:436
 #, c-format
 msgid ""
@@ -1716,3 +1672,48 @@ msgstr ""
 "William LeFebvreDo you really want to delete the display?Er du sikker på at du "
 "vil slette visningen?Delete DisplaySlett visningForeground "
 "Color:Forgrunnsfarge:Background Color:Bakgrunnsfarge:0"
+
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"Dette er ditt arbeidsområde. Det inneholder arbeidsarkene dine. Du må lage et "
+"nytt arbeidsark (Meny->Fil->Ny) før du kan dra sensorer hit."
+
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "Ark %1"
+
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"Arbeidsarket «%1» inneholder ulagrede data.\n"
+"Vil du lagre arbeidsarket?"
+
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|Sensorfiler"
+
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "Velg et arbeidsark å hente inn"
+
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "Du har ikke noe arbeidsark som kan lagres."
+
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "Lagre gjeldende arbeidsark som"
+
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "Det er ingen arbeidsark som kunne slettes."
+
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "Finner ikke fila ProcessTable.sgrd."