Second part of prior commit

1 files changed, 648 insertions, 0 deletions

diff --git a/tde-i18n-nb/messages/tdenetwork/kcmwifi.po b/tde-i18n-nb/messages/tdenetwork/kcmwifi.po
new file mode 100644
index 00000000000..aa39d37f97b
--- /dev/null
+++ b/tde-i18n-nb/messages/tdenetwork/kcmwifi.po
@@ -0,0 +1,648 @@
+# translation of kcmwifi.po to Norwegian bokmål
+# Copyright (C) 2003, 2005, 2006 Free Software Foundation, Inc.
+#
+# Knut Yrvin <knuty@skolelinux.no>, 2003.
+# Bjørn Steensrud <bjornst@powertech.no>, 2005.
+# Nils Kristian Tomren <project@nilsk.net>, 2005.
+# Axel Bojer <axelb@skolelinux.no>, 2005, 2006, 2007
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmwifi\n"
+"POT-Creation-Date: 2006-11-25 02:36+0100\n"
+"PO-Revision-Date: 2006-06-26 13:57+0200\n"
+"Last-Translator: Axel Bojer <axelb@skolelinux.no>\n"
+"Language-Team: Norwegian bokmål <i18n-nb@lister.pping.uio.no>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: ifconfigpage.cpp:136
+msgid "Configure Power Mode"
+msgstr "Endre innstillingene for strømsparing"
+
+#: ifconfigpage.cpp:156
+msgid "Configure Encryption"
+msgstr "Endre innstillingene for kryptering"
+
+#: kcmwifi.cpp:57 kcmwifi.cpp:172
+#, c-format
+msgid "Config &%1"
+msgstr "Oppsett &%1"
+
+#: kcmwifi.cpp:82
+msgid ""
+"Error executing iwconfig. WLAN configurations can only be altered if the "
+"wireless tools are properly installed."
+msgstr ""
+"Feil ved kjøring av iwconfig. WLAN -innstillingene kan bare endres hvis "
+"verktøyene for trådløst nettverk er rett installert."
+
+#: kcmwifi.cpp:84
+msgid "No Wireless Tools"
+msgstr "Ingen verktøy for trådløst nettverk"
+
+#: kcmwifi.cpp:149 mainconfig.cpp:94
+#, c-format
+msgid "Vendor %1"
+msgstr "Leverandør %1"
+
+#: kcmwifi.cpp:239
+msgid ""
+"Interface could not be shut down.  It is likely that your settings have not "
+"been applied."
+msgstr ""
+"Klarte ikke å slå av grensesnittet. Innstillingene dine er er antakelig ikke "
+"tatt i bruk."
+
+#: kcmwifi.cpp:252
+msgid "SSID could not be set."
+msgstr "Klarte ikke å angi SSID."
+
+#: kcmwifi.cpp:265
+msgid "Operation mode could not be set."
+msgstr "Klarte ikke å angi driftsmodus."
+
+#: kcmwifi.cpp:278
+msgid "Speed settings could not be modified."
+msgstr "Klarte ikke å endre hastighetsinnstillingene."
+
+#: kcmwifi.cpp:321
+msgid "Encryption settings could not be set."
+msgstr "Klarte ikke å angi krypteringsinnstillingene."
+
+#: kcmwifi.cpp:348
+msgid "Power management settings could not be set."
+msgstr "Klarte ikke å angi effektstyringsinnstillingene."
+
+#: kcmwifi.cpp:359
+msgid "Interface could not be re-enabled."
+msgstr "Klarte ikke å slå på grensesnittet igjen."
+
+#: kcmwifi.cpp:369
+msgid "The following settings could not be applied:"
+msgstr "Følgende innstillinger kunne ikke tas i bruk:"
+
+#: mainconfig.cpp:42 mainconfig.cpp:99
+#, c-format
+msgid "Config %1"
+msgstr "Oppsett %1"
+
+#. i18n: file configadvanced.ui line 41
+#: rc.cpp:3
+#, no-c-format
+msgid "Channel:"
+msgstr "Kanal:"
+
+#. i18n: file configadvanced.ui line 57
+#: rc.cpp:6
+#, no-c-format
+msgid "Transmit power:"
+msgstr "Sendestyrke:"
+
+#. i18n: file configadvanced.ui line 86
+#: rc.cpp:9
+#, no-c-format
+msgid "Force registration to an access point"
+msgstr "Lås registreringa til et aksesspunkt"
+
+#. i18n: file configadvanced.ui line 127
+#: rc.cpp:12
+#, no-c-format
+msgid "MAC address:"
+msgstr "MAC-adresse:"
+
+#. i18n: file configcrypto.ui line 35
+#: rc.cpp:15
+#, no-c-format
+msgid "Crypto Keys"
+msgstr "Krypteringsnøkler"
+
+#. i18n: file configcrypto.ui line 46
+#: rc.cpp:18
+#, no-c-format
+msgid "Key 1:"
+msgstr "Nøkkel 1:"
+
+#. i18n: file configcrypto.ui line 49
+#: rc.cpp:21
+#, no-c-format
+msgid ""
+"The first encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Første krypteringsnøkkel: 5 eller 13 tegn er ASCII-nøkler, 10 eller 26 tegn er "
+"heksadesimale nøkler."
+
+#. i18n: file configcrypto.ui line 57
+#: rc.cpp:24
+#, no-c-format
+msgid "Key 3:"
+msgstr "Nøkkel 3:"
+
+#. i18n: file configcrypto.ui line 60
+#: rc.cpp:27
+#, no-c-format
+msgid ""
+"The third encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Tredje krypteringsnøkkel: 5 eller 13 tegn er ASCII-nøkler, 10 eller 26 tegn er "
+"heksadesimale nøkler."
+
+#. i18n: file configcrypto.ui line 68
+#: rc.cpp:30
+#, no-c-format
+msgid "Key 2:"
+msgstr "Nøkkel 2:"
+
+#. i18n: file configcrypto.ui line 71
+#: rc.cpp:33
+#, no-c-format
+msgid ""
+"The second encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Andre krypteringsnøkkel: 5 eller 13 tegn er ASCII-nøkler, 10 eller 26 tegn er "
+"heksadesimale nøkler."
+
+#. i18n: file configcrypto.ui line 79
+#: rc.cpp:36
+#, no-c-format
+msgid "Key 4:"
+msgstr "Nøkkel 4:"
+
+#. i18n: file configcrypto.ui line 82
+#: rc.cpp:39
+#, no-c-format
+msgid ""
+"The fourth encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr ""
+"Fjerde krypteringsnøkkel: 5 eller 13 tegn er ASCII-nøkler, 10 eller 26 tegn er "
+"heksadesimale nøkler."
+
+#. i18n: file configcrypto.ui line 98
+#: rc.cpp:42
+#, no-c-format
+msgid "<font color=\"#ff0000\">unrecognized</font>"
+msgstr "<font color=\"#ff0000\">ikke gjenkjent</font>"
+
+#. i18n: file configcrypto.ui line 117
+#: rc.cpp:45 rc.cpp:48 rc.cpp:51
+#, no-c-format
+msgid "<font color=\"#ff0000\">unrecognised</font>"
+msgstr "<font color=\"#ff0000\">ikke gjenkjent</font>"
+
+#. i18n: file configcrypto.ui line 220
+#: rc.cpp:54
+#, no-c-format
+msgid "Crypto Mode"
+msgstr "Krypteringsvalg"
+
+#. i18n: file configcrypto.ui line 223
+#: rc.cpp:57
+#, no-c-format
+msgid "Sets which types of packets the card will accept."
+msgstr "Angi hva slags pakker kortet vil ta imot."
+
+#. i18n: file configcrypto.ui line 234
+#: rc.cpp:60
+#, no-c-format
+msgid "Ope&n"
+msgstr "Åp&ent"
+
+#. i18n: file configcrypto.ui line 237
+#: rc.cpp:63
+#, no-c-format
+msgid "Makes the card accept encrypted and unencrypted packets."
+msgstr "La kortet ta imot både krypterte og ukrypterte pakker."
+
+#. i18n: file configcrypto.ui line 245
+#: rc.cpp:66
+#, no-c-format
+msgid "Restricted"
+msgstr "Begrenset"
+
+#. i18n: file configcrypto.ui line 248
+#: rc.cpp:69
+#, no-c-format
+msgid "Makes the card only accept encrypted packets."
+msgstr "Bare la kortet ta imot krypterte pakker."
+
+#. i18n: file configcrypto.ui line 275
+#: rc.cpp:72
+#, no-c-format
+msgid "Key to use:"
+msgstr "Valgt nøkkel:"
+
+#. i18n: file configcrypto.ui line 278
+#: rc.cpp:75
+#, no-c-format
+msgid "Sets which of the four keys is to be used for transmitting packets."
+msgstr "Angi hvilken av de fire nøklene som skal brukes til å sende pakker."
+
+#. i18n: file configcrypto.ui line 284
+#: rc.cpp:78
+#, no-c-format
+msgid "Key 1"
+msgstr "Nøkkel 1"
+
+#. i18n: file configcrypto.ui line 289
+#: rc.cpp:81
+#, no-c-format
+msgid "Key 2"
+msgstr "Nøkkel 2"
+
+#. i18n: file configcrypto.ui line 294
+#: rc.cpp:84
+#, no-c-format
+msgid "Key 3"
+msgstr "Nøkkel 3"
+
+#. i18n: file configcrypto.ui line 299
+#: rc.cpp:87
+#, no-c-format
+msgid "Key 4"
+msgstr "Nøkkel 4"
+
+#. i18n: file configpower.ui line 27
+#: rc.cpp:90
+#, no-c-format
+msgid "Sleep timeout:"
+msgstr "Tidsavbrudd for sovemodus:"
+
+#. i18n: file configpower.ui line 30
+#: rc.cpp:93
+#, no-c-format
+msgid ""
+"Sets how long the card will be offline before looking for new packages again."
+msgstr ""
+"Angi hvor lenge kortet skal være frakoblet før det ser etter nye pakker igjen."
+
+#. i18n: file configpower.ui line 55
+#: rc.cpp:96 rc.cpp:129
+#, no-c-format
+msgid " sec"
+msgstr " s"
+
+#. i18n: file configpower.ui line 63
+#: rc.cpp:99
+#, no-c-format
+msgid "Wakeup period:"
+msgstr "Arbeidsperiode:"
+
+#. i18n: file configpower.ui line 66
+#: rc.cpp:102
+#, no-c-format
+msgid ""
+"Sets how long the card will be online and looking for new packages before it "
+"falls asleep."
+msgstr ""
+"Angi hvor lenge kortet skal være tilkoblet og se etter nye pakker før det går i "
+"sovemodus."
+
+#. i18n: file configpower.ui line 74
+#: rc.cpp:105
+#, no-c-format
+msgid "Receive Packets"
+msgstr "Motta pakker"
+
+#. i18n: file configpower.ui line 77
+#: rc.cpp:108
+#, no-c-format
+msgid "Sets which sort of packets to listen to."
+msgstr "Angi hvilke pakketyper kortet skal lytte etter."
+
+#. i18n: file configpower.ui line 88
+#: rc.cpp:111
+#, no-c-format
+msgid "All"
+msgstr "Alle"
+
+#. i18n: file configpower.ui line 91
+#: rc.cpp:114
+#, no-c-format
+msgid "Listen to all packet types."
+msgstr "Lytt etter alle pakketyper."
+
+#. i18n: file configpower.ui line 99
+#: rc.cpp:117
+#, no-c-format
+msgid "Unicast only"
+msgstr "Bare unicast"
+
+#. i18n: file configpower.ui line 102
+#: rc.cpp:120
+#, no-c-format
+msgid "Listen to Unicast packets only."
+msgstr "Bare lytt etter unicast-pakker."
+
+#. i18n: file configpower.ui line 110
+#: rc.cpp:123
+#, no-c-format
+msgid "Multicast/Broadcast only"
+msgstr "Bare multicast/kringkasting"
+
+#. i18n: file configpower.ui line 113
+#: rc.cpp:126
+#, no-c-format
+msgid "Listen to Multicast and Broadcast packets only."
+msgstr "Bare lytt etter multi/broadcast-pakker."
+
+#. i18n: file ifconfigpagebase.ui line 32
+#: rc.cpp:132
+#, no-c-format
+msgid "Network name:"
+msgstr "Nettverksnavn:"
+
+#. i18n: file ifconfigpagebase.ui line 35
+#: rc.cpp:135 rc.cpp:141
+#, no-c-format
+msgid ""
+"SSID of the network to connect to. \"any\" means \"arbitrary available "
+"network\"."
+msgstr ""
+"SSID for nettet som det skal kobles til. «any» betyr «hvilket som helst "
+"tilgjengelig nettverk»."
+
+#. i18n: file ifconfigpagebase.ui line 48
+#: rc.cpp:138
+#, no-c-format
+msgid "Interface:"
+msgstr "Grensesnitt:"
+
+#. i18n: file ifconfigpagebase.ui line 67
+#: rc.cpp:144
+#, no-c-format
+msgid "Autodetect"
+msgstr "Finn grensesnittet automatisk"
+
+#. i18n: file ifconfigpagebase.ui line 105
+#: rc.cpp:147
+#, no-c-format
+msgid "Script:"
+msgstr "Skript:"
+
+#. i18n: file ifconfigpagebase.ui line 108
+#: rc.cpp:150
+#, no-c-format
+msgid ""
+"Command to perform after the connection is established, e.g. for obtaining a "
+"DHCP lease."
+msgstr ""
+"Kommando som skal kjøres etter at tilkoblingen er etablert, f.eks. for å hente "
+"en DHCP-adresse."
+
+#. i18n: file ifconfigpagebase.ui line 151
+#: rc.cpp:153
+#, no-c-format
+msgid "Enable power management"
+msgstr "Skru på strømsparing"
+
+#. i18n: file ifconfigpagebase.ui line 154
+#: rc.cpp:156
+#, no-c-format
+msgid "Enables advanced power management settings."
+msgstr "Skru på avanserte strømsparingsinnstillinger."
+
+#. i18n: file ifconfigpagebase.ui line 165
+#: rc.cpp:159 rc.cpp:243
+#, no-c-format
+msgid "Configure..."
+msgstr "Oppsett …"
+
+#. i18n: file ifconfigpagebase.ui line 168
+#: rc.cpp:162
+#, no-c-format
+msgid "Clicking this button opens the Power Management menu."
+msgstr "Trykk her for å åpne strømsparingsmenyen."
+
+#. i18n: file ifconfigpagebase.ui line 203
+#: rc.cpp:165
+#, no-c-format
+msgid "Speed:"
+msgstr "Hastighet:"
+
+#. i18n: file ifconfigpagebase.ui line 206
+#: rc.cpp:168
+#, no-c-format
+msgid "Sets the connection speed. Not all cards support this."
+msgstr "Angi tilkoblingshastigheten. Ikke alle kort støtter dette."
+
+#. i18n: file ifconfigpagebase.ui line 212
+#: rc.cpp:171
+#, no-c-format
+msgid "Auto"
+msgstr "Auto"
+
+#. i18n: file ifconfigpagebase.ui line 217
+#: rc.cpp:174
+#, no-c-format
+msgid "1 Mb/s"
+msgstr "1 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 222
+#: rc.cpp:177
+#, no-c-format
+msgid "2 Mb/s"
+msgstr "2 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 227
+#: rc.cpp:180
+#, no-c-format
+msgid "5.5 Mb/s"
+msgstr "5.5 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 232
+#: rc.cpp:183
+#, no-c-format
+msgid "6 Mb/s"
+msgstr "6 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 237
+#: rc.cpp:186
+#, no-c-format
+msgid "9 Mb/s"
+msgstr "9 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 242
+#: rc.cpp:189
+#, no-c-format
+msgid "11 Mb/s"
+msgstr "11 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 247
+#: rc.cpp:192
+#, no-c-format
+msgid "12 Mb/s"
+msgstr "12 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 252
+#: rc.cpp:195
+#, no-c-format
+msgid "18 Mb/s"
+msgstr "18 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 257
+#: rc.cpp:198
+#, no-c-format
+msgid "24 Mb/s"
+msgstr "24 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 262
+#: rc.cpp:201
+#, no-c-format
+msgid "36 Mb/s"
+msgstr "36 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 267
+#: rc.cpp:204
+#, no-c-format
+msgid "48 Mb/s"
+msgstr "48 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 272
+#: rc.cpp:207
+#, no-c-format
+msgid "54 Mb/s"
+msgstr "54 MBit/s"
+
+#. i18n: file ifconfigpagebase.ui line 311
+#: rc.cpp:210
+#, no-c-format
+msgid "Operation mode:"
+msgstr "Driftsmodus:"
+
+#. i18n: file ifconfigpagebase.ui line 314
+#: rc.cpp:213
+#, no-c-format
+msgid ""
+"Operation mode of the card. For standard infrastructure networks, \"Managed\" "
+"is appropriate."
+msgstr "Driftsmodus for kortet. «Styrt» passer for vanlige lokale nettverk."
+
+#. i18n: file ifconfigpagebase.ui line 320
+#: rc.cpp:216
+#, no-c-format
+msgid "Ad-Hoc"
+msgstr "Ustyrt"
+
+#. i18n: file ifconfigpagebase.ui line 325
+#: rc.cpp:219
+#, no-c-format
+msgid "Managed"
+msgstr "Styrt"
+
+#. i18n: file ifconfigpagebase.ui line 330
+#: rc.cpp:222
+#, no-c-format
+msgid "Repeater"
+msgstr "Reléstasjon"
+
+#. i18n: file ifconfigpagebase.ui line 335
+#: rc.cpp:225
+#, no-c-format
+msgid "Master"
+msgstr "Sjef"
+
+#. i18n: file ifconfigpagebase.ui line 340
+#: rc.cpp:228
+#, no-c-format
+msgid "Secondary"
+msgstr "Sekundær"
+
+#. i18n: file ifconfigpagebase.ui line 379
+#: rc.cpp:231
+#, no-c-format
+msgid "Execute script on connect"
+msgstr "Kjør skript ved tilkobling"
+
+#. i18n: file ifconfigpagebase.ui line 382
+#: rc.cpp:234
+#, no-c-format
+msgid ""
+"Activates a script to perform arbitrary operations after associating with the "
+"network."
+msgstr ""
+"Start et skript for å utføre handlinger etter at nettverket er tilkoblet."
+
+#. i18n: file ifconfigpagebase.ui line 417
+#: rc.cpp:237
+#, no-c-format
+msgid "Use encryption"
+msgstr "Bruk kryptering"
+
+#. i18n: file ifconfigpagebase.ui line 420
+#: rc.cpp:240
+#, no-c-format
+msgid "Enables WEP encryption."
+msgstr "Slå på WEP-kryptering"
+
+#. i18n: file ifconfigpagebase.ui line 434
+#: rc.cpp:246
+#, no-c-format
+msgid "Clicking this button opens the Encryption menu."
+msgstr "Trykk på denne knappen for å åpne krypteringsmenyen."
+
+#. i18n: file mainconfigbase.ui line 24
+#: rc.cpp:249
+#, no-c-format
+msgid "General Settings"
+msgstr "Generelle innstillinger"
+
+#. i18n: file mainconfigbase.ui line 35
+#: rc.cpp:252
+#, no-c-format
+msgid "&Activate"
+msgstr "&Ta i bruk"
+
+#. i18n: file mainconfigbase.ui line 38
+#: rc.cpp:255
+#, no-c-format
+msgid "Applies the configuration to the interface."
+msgstr "Ta i bruk grensesnittoppsettet."
+
+#. i18n: file mainconfigbase.ui line 63
+#: rc.cpp:258
+#, no-c-format
+msgid "Number of configurations:"
+msgstr "Antall oppsett:"
+
+#. i18n: file mainconfigbase.ui line 66
+#: rc.cpp:261
+#, no-c-format
+msgid "Modifies the number of configurations that this tool should provide."
+msgstr "Endre antall oppsett som dette verktøyet skal tilby."
+
+#. i18n: file mainconfigbase.ui line 74
+#: rc.cpp:264 rc.cpp:270
+#, no-c-format
+msgid "Selects which of the configurations is to be applied."
+msgstr "Velg hvilket oppsett som skal tas i bruk."
+
+#. i18n: file mainconfigbase.ui line 104
+#: rc.cpp:267
+#, no-c-format
+msgid "Configuration to load:"
+msgstr "Bruk dette oppsettet:"
+
+#. i18n: file mainconfigbase.ui line 149
+#: rc.cpp:273
+#, no-c-format
+msgid "Load preset &configuration on startup"
+msgstr "Last inn forhåndsvalgte &innstillinger ved oppstart"
+
+#. i18n: file mainconfigbase.ui line 152
+#: rc.cpp:276
+#, no-c-format
+msgid ""
+"When this box is checked, your settings are applied when you launch the Control "
+"Center module."
+msgstr ""
+"Hvis du krysser av for dette, tas innstillingene dine i bruk når du starter "
+"kontrollpanel-modulen."
+
+#: wificonfig.cpp:239 wificonfig.cpp:261 wificonfig.cpp:280
+msgid "Unable to autodetect wireless interface."
+msgstr "Klarte ikke finne det trådløse grensesnittet automatisk."