Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

(cherry picked from commit d571620133187d2852ee5da9abcaeb24c2049392)

1 files changed, 124 insertions, 198 deletions

diff --git a/tde-i18n-nl/messages/tdenetwork/kcmwifi.po b/tde-i18n-nl/messages/tdenetwork/kcmwifi.po
index 7767c66d060..5794acbb213 100644
--- a/tde-i18n-nl/messages/tdenetwork/kcmwifi.po
+++ b/tde-i18n-nl/messages/tdenetwork/kcmwifi.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmwifi\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-20 01:35+0100\n"
 "PO-Revision-Date: 2006-11-25 00:14+0100\n"
 "Last-Translator: Bram Schoenmakers <bramschoenmakers@kde.nl>\n"
 "Language-Team: Nederlands <kde-i18n-nl@kde.org>\n"
@@ -18,6 +18,18 @@ msgstr ""
 "X-Generator: KBabel 1.11.4\n"
 "Plural-Forms:  nplurals=2; plural=(n != 1);\n"
 
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr ""
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+
 #: ifconfigpage.cpp:136
 msgid "Configure Power Mode"
 msgstr "Energieverbruik instellen"
@@ -36,9 +48,9 @@ msgid ""
 "Error executing iwconfig. WLAN configurations can only be altered if the "
 "wireless tools are properly installed."
 msgstr ""
-"Er trad een fout op bij het uitvoeren van iwconfig. WLAN-configuraties kunnen "
-"alleen worden veranderd als de hulpprogramma's voor draadloze netwerken correct "
-"geïnstalleerd zijn."
+"Er trad een fout op bij het uitvoeren van iwconfig. WLAN-configuraties "
+"kunnen alleen worden veranderd als de hulpprogramma's voor draadloze "
+"netwerken correct geïnstalleerd zijn."
 
 #: kcmwifi.cpp:84
 msgid "No Wireless Tools"
@@ -54,8 +66,8 @@ msgid ""
 "Interface could not be shut down.  It is likely that your settings have not "
 "been applied."
 msgstr ""
-"De interface kon niet worden afgesloten. Er lijkt erop dat uw instellingen niet "
-"zijn toegepast."
+"De interface kon niet worden afgesloten. Er lijkt erop dat uw instellingen "
+"niet zijn toegepast."
 
 #: kcmwifi.cpp:252
 msgid "SSID could not be set."
@@ -90,196 +102,167 @@ msgstr "De volgende instellingen konden niet worden toegepast:"
 msgid "Config %1"
 msgstr "%1 instellen"
 
-#. i18n: file configadvanced.ui line 41
-#: rc.cpp:3
+#: configadvanced.ui:41
 #, no-c-format
 msgid "Channel:"
 msgstr "Kanaal:"
 
-#. i18n: file configadvanced.ui line 57
-#: rc.cpp:6
+#: configadvanced.ui:57
 #, no-c-format
 msgid "Transmit power:"
 msgstr "Zendkracht:"
 
-#. i18n: file configadvanced.ui line 86
-#: rc.cpp:9
+#: configadvanced.ui:86
 #, no-c-format
 msgid "Force registration to an access point"
 msgstr "Registratie bij een accespoint forceren"
 
-#. i18n: file configadvanced.ui line 127
-#: rc.cpp:12
+#: configadvanced.ui:127
 #, no-c-format
 msgid "MAC address:"
 msgstr "MAC-adres:"
 
-#. i18n: file configcrypto.ui line 35
-#: rc.cpp:15
+#: configcrypto.ui:35
 #, no-c-format
 msgid "Crypto Keys"
 msgstr "Cryptografische sleutels"
 
-#. i18n: file configcrypto.ui line 46
-#: rc.cpp:18
+#: configcrypto.ui:46
 #, no-c-format
 msgid "Key 1:"
 msgstr "Sleutel 1:"
 
-#. i18n: file configcrypto.ui line 49
-#: rc.cpp:21
+#: configcrypto.ui:49
 #, no-c-format
 msgid ""
 "The first encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
 "characters are hexadecimal keys."
 msgstr ""
-"De eerste cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, 10 "
-"of 26 lettertekens zijn hexadecimale sleutels."
+"De eerste cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, "
+"10 of 26 lettertekens zijn hexadecimale sleutels."
 
-#. i18n: file configcrypto.ui line 57
-#: rc.cpp:24
+#: configcrypto.ui:57
 #, no-c-format
 msgid "Key 3:"
 msgstr "Sleutel 3:"
 
-#. i18n: file configcrypto.ui line 60
-#: rc.cpp:27
+#: configcrypto.ui:60
 #, no-c-format
 msgid ""
 "The third encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
 "characters are hexadecimal keys."
 msgstr ""
-"De derde cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, 10 "
-"of 26 lettertekens zijn hexadecimale sleutels."
+"De derde cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, "
+"10 of 26 lettertekens zijn hexadecimale sleutels."
 
-#. i18n: file configcrypto.ui line 68
-#: rc.cpp:30
+#: configcrypto.ui:68
 #, no-c-format
 msgid "Key 2:"
 msgstr "Sleutel 2:"
 
-#. i18n: file configcrypto.ui line 71
-#: rc.cpp:33
+#: configcrypto.ui:71
 #, no-c-format
 msgid ""
 "The second encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
 "characters are hexadecimal keys."
 msgstr ""
-"De tweede cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, 10 "
-"of 26 lettertekens zijn hexadecimale sleutels."
+"De tweede cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, "
+"10 of 26 lettertekens zijn hexadecimale sleutels."
 
-#. i18n: file configcrypto.ui line 79
-#: rc.cpp:36
+#: configcrypto.ui:79
 #, no-c-format
 msgid "Key 4:"
 msgstr "Sleutel 4:"
 
-#. i18n: file configcrypto.ui line 82
-#: rc.cpp:39
+#: configcrypto.ui:82
 #, no-c-format
 msgid ""
 "The fourth encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
 "characters are hexadecimal keys."
 msgstr ""
-"De vierde cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, 10 "
-"of 26 lettertekens zijn hexadecimale sleutels."
+"De vierde cryptografische sleutel. 5 of 13 lettertekens zijn ASCII-sleutels, "
+"10 of 26 lettertekens zijn hexadecimale sleutels."
 
-#. i18n: file configcrypto.ui line 98
-#: rc.cpp:42
+#: configcrypto.ui:98
 #, no-c-format
 msgid "<font color=\"#ff0000\">unrecognized</font>"
 msgstr "<font color=\"#ff0000\">niet herkend</font>"
 
-#. i18n: file configcrypto.ui line 117
-#: rc.cpp:45 rc.cpp:48 rc.cpp:51
+#: configcrypto.ui:117 configcrypto.ui:162 configcrypto.ui:194
 #, no-c-format
 msgid "<font color=\"#ff0000\">unrecognised</font>"
 msgstr "<font color=\"#ff0000\">niet herkend</font>"
 
-#. i18n: file configcrypto.ui line 220
-#: rc.cpp:54
+#: configcrypto.ui:220
 #, no-c-format
 msgid "Crypto Mode"
 msgstr "Versleutelingsmodus"
 
-#. i18n: file configcrypto.ui line 223
-#: rc.cpp:57
+#: configcrypto.ui:223
 #, no-c-format
 msgid "Sets which types of packets the card will accept."
 msgstr "Geeft aan welke pakkettypen de kaart zal accepteren."
 
-#. i18n: file configcrypto.ui line 234
-#: rc.cpp:60
+#: configcrypto.ui:234
 #, no-c-format
 msgid "Ope&n"
 msgstr "Ope&nen"
 
-#. i18n: file configcrypto.ui line 237
-#: rc.cpp:63
+#: configcrypto.ui:237
 #, no-c-format
 msgid "Makes the card accept encrypted and unencrypted packets."
 msgstr ""
 "Zorgt ervoor dat de kaart versleutelde en niet-versleutelde pakketten "
 "accepteert."
 
-#. i18n: file configcrypto.ui line 245
-#: rc.cpp:66
+#: configcrypto.ui:245
 #, no-c-format
 msgid "Restricted"
 msgstr "Beperkt"
 
-#. i18n: file configcrypto.ui line 248
-#: rc.cpp:69
+#: configcrypto.ui:248
 #, no-c-format
 msgid "Makes the card only accept encrypted packets."
 msgstr "Zorgt ervoor dat de kaart alleen versleutelde pakketten accepteert."
 
-#. i18n: file configcrypto.ui line 275
-#: rc.cpp:72
+#: configcrypto.ui:275
 #, no-c-format
 msgid "Key to use:"
 msgstr "Te gebruiken sleutel:"
 
-#. i18n: file configcrypto.ui line 278
-#: rc.cpp:75
+#: configcrypto.ui:278
 #, no-c-format
 msgid "Sets which of the four keys is to be used for transmitting packets."
 msgstr ""
-"Bepaalt welke van de vier sleutels zal worden gebruikt voor het versturen van "
-"pakketten."
+"Bepaalt welke van de vier sleutels zal worden gebruikt voor het versturen "
+"van pakketten."
 
-#. i18n: file configcrypto.ui line 284
-#: rc.cpp:78
+#: configcrypto.ui:284
 #, no-c-format
 msgid "Key 1"
 msgstr "Sleutel 1"
 
-#. i18n: file configcrypto.ui line 289
-#: rc.cpp:81
+#: configcrypto.ui:289
 #, no-c-format
 msgid "Key 2"
 msgstr "Sleutel 2"
 
-#. i18n: file configcrypto.ui line 294
-#: rc.cpp:84
+#: configcrypto.ui:294
 #, no-c-format
 msgid "Key 3"
 msgstr "Sleutel 3"
 
-#. i18n: file configcrypto.ui line 299
-#: rc.cpp:87
+#: configcrypto.ui:299
 #, no-c-format
 msgid "Key 4"
 msgstr "Sleutel 4"
 
-#. i18n: file configpower.ui line 27
-#: rc.cpp:90
+#: configpower.ui:27
 #, no-c-format
 msgid "Sleep timeout:"
 msgstr "Slaapstand-timeout:"
 
-#. i18n: file configpower.ui line 30
-#: rc.cpp:93
+#: configpower.ui:30
 #, no-c-format
 msgid ""
 "Sets how long the card will be offline before looking for new packages again."
@@ -287,20 +270,17 @@ msgstr ""
 "Bepaalt hoe lang de kaart offline zal zijn voordat er opnieuw wordt "
 "gecontroleerd op nieuwe pakketten."
 
-#. i18n: file configpower.ui line 55
-#: rc.cpp:96 rc.cpp:129
+#: configpower.ui:55 configpower.ui:137
 #, no-c-format
 msgid " sec"
 msgstr " sec"
 
-#. i18n: file configpower.ui line 63
-#: rc.cpp:99
+#: configpower.ui:63
 #, no-c-format
 msgid "Wakeup period:"
 msgstr "Ontwaakperiode:"
 
-#. i18n: file configpower.ui line 66
-#: rc.cpp:102
+#: configpower.ui:66
 #, no-c-format
 msgid ""
 "Sets how long the card will be online and looking for new packages before it "
@@ -309,62 +289,52 @@ msgstr ""
 "Bepaalt hoe lang de kaart online zal zijn en zal controleren op nieuwe "
 "pakketten voordat de kaart offline gaat."
 
-#. i18n: file configpower.ui line 74
-#: rc.cpp:105
+#: configpower.ui:74
 #, no-c-format
 msgid "Receive Packets"
 msgstr "Pakketten ontvangen"
 
-#. i18n: file configpower.ui line 77
-#: rc.cpp:108
+#: configpower.ui:77
 #, no-c-format
 msgid "Sets which sort of packets to listen to."
 msgstr "Bepaalt naar welke pakketsoorten er geluisterd zal worden."
 
-#. i18n: file configpower.ui line 88
-#: rc.cpp:111
+#: configpower.ui:88
 #, no-c-format
 msgid "All"
 msgstr "Alles"
 
-#. i18n: file configpower.ui line 91
-#: rc.cpp:114
+#: configpower.ui:91
 #, no-c-format
 msgid "Listen to all packet types."
 msgstr "Naar alle pakkettypen luisteren."
 
-#. i18n: file configpower.ui line 99
-#: rc.cpp:117
+#: configpower.ui:99
 #, no-c-format
 msgid "Unicast only"
 msgstr "Alleen unicast"
 
-#. i18n: file configpower.ui line 102
-#: rc.cpp:120
+#: configpower.ui:102
 #, no-c-format
 msgid "Listen to Unicast packets only."
 msgstr "Alleen naar Unicast-pakketten luisteren."
 
-#. i18n: file configpower.ui line 110
-#: rc.cpp:123
+#: configpower.ui:110
 #, no-c-format
 msgid "Multicast/Broadcast only"
 msgstr "Alleen multi-/broadcast"
 
-#. i18n: file configpower.ui line 113
-#: rc.cpp:126
+#: configpower.ui:113
 #, no-c-format
 msgid "Listen to Multicast and Broadcast packets only."
 msgstr "Alleen naar Multicast- en Broadcast-pakketten luisteren."
 
-#. i18n: file ifconfigpagebase.ui line 32
-#: rc.cpp:132
+#: ifconfigpagebase.ui:32
 #, no-c-format
 msgid "Network name:"
 msgstr "Netwerknaam:"
 
-#. i18n: file ifconfigpagebase.ui line 35
-#: rc.cpp:135 rc.cpp:141
+#: ifconfigpagebase.ui:35 ifconfigpagebase.ui:51
 #, no-c-format
 msgid ""
 "SSID of the network to connect to. \"any\" means \"arbitrary available "
@@ -373,26 +343,22 @@ msgstr ""
 "SSID van het netwerk waarmee verbinding zal worden gemaakt. \"elk\" betekent "
 "\"willekeurig beschikbaar netwerk\"."
 
-#. i18n: file ifconfigpagebase.ui line 48
-#: rc.cpp:138
+#: ifconfigpagebase.ui:48
 #, no-c-format
 msgid "Interface:"
 msgstr "Interface:"
 
-#. i18n: file ifconfigpagebase.ui line 67
-#: rc.cpp:144
+#: ifconfigpagebase.ui:67
 #, no-c-format
 msgid "Autodetect"
 msgstr "Automatisch detecteren"
 
-#. i18n: file ifconfigpagebase.ui line 105
-#: rc.cpp:147
+#: ifconfigpagebase.ui:105
 #, no-c-format
 msgid "Script:"
 msgstr "Script:"
 
-#. i18n: file ifconfigpagebase.ui line 108
-#: rc.cpp:150
+#: ifconfigpagebase.ui:108
 #, no-c-format
 msgid ""
 "Command to perform after the connection is established, e.g. for obtaining a "
@@ -401,257 +367,217 @@ msgstr ""
 "Commando om uit te voeren als de verbinding is opgebouwd, zoals voor het "
 "verkrijgen van een DHCP-lease."
 
-#. i18n: file ifconfigpagebase.ui line 151
-#: rc.cpp:153
+#: ifconfigpagebase.ui:151
 #, no-c-format
 msgid "Enable power management"
 msgstr "Energiebeheer inschakelen"
 
-#. i18n: file ifconfigpagebase.ui line 154
-#: rc.cpp:156
+#: ifconfigpagebase.ui:154
 #, no-c-format
 msgid "Enables advanced power management settings."
 msgstr "Activeert de instellingen voor geavanceerd energiebeheer"
 
-#. i18n: file ifconfigpagebase.ui line 165
-#: rc.cpp:159 rc.cpp:243
+#: ifconfigpagebase.ui:165 ifconfigpagebase.ui:431
 #, no-c-format
 msgid "Configure..."
 msgstr "Instellen..."
 
-#. i18n: file ifconfigpagebase.ui line 168
-#: rc.cpp:162
+#: ifconfigpagebase.ui:168
 #, no-c-format
 msgid "Clicking this button opens the Power Management menu."
 msgstr "Deze knop opent het energiebeheermenu"
 
-#. i18n: file ifconfigpagebase.ui line 203
-#: rc.cpp:165
+#: ifconfigpagebase.ui:203
 #, no-c-format
 msgid "Speed:"
 msgstr "Snelheid:"
 
-#. i18n: file ifconfigpagebase.ui line 206
-#: rc.cpp:168
+#: ifconfigpagebase.ui:206
 #, no-c-format
 msgid "Sets the connection speed. Not all cards support this."
 msgstr "Bepaalt de verbindingssnelheid. Niet alle kaarten ondersteunen dit."
 
-#. i18n: file ifconfigpagebase.ui line 212
-#: rc.cpp:171
+#: ifconfigpagebase.ui:212
 #, no-c-format
 msgid "Auto"
 msgstr "Automatisch"
 
-#. i18n: file ifconfigpagebase.ui line 217
-#: rc.cpp:174
+#: ifconfigpagebase.ui:217
 #, no-c-format
 msgid "1 Mb/s"
 msgstr "1 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 222
-#: rc.cpp:177
+#: ifconfigpagebase.ui:222
 #, no-c-format
 msgid "2 Mb/s"
 msgstr "2 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 227
-#: rc.cpp:180
+#: ifconfigpagebase.ui:227
 #, no-c-format
 msgid "5.5 Mb/s"
 msgstr "5.5 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 232
-#: rc.cpp:183
+#: ifconfigpagebase.ui:232
 #, no-c-format
 msgid "6 Mb/s"
 msgstr "6 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 237
-#: rc.cpp:186
+#: ifconfigpagebase.ui:237
 #, no-c-format
 msgid "9 Mb/s"
 msgstr "9 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 242
-#: rc.cpp:189
+#: ifconfigpagebase.ui:242
 #, no-c-format
 msgid "11 Mb/s"
 msgstr "11 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 247
-#: rc.cpp:192
+#: ifconfigpagebase.ui:247
 #, no-c-format
 msgid "12 Mb/s"
 msgstr "12 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 252
-#: rc.cpp:195
+#: ifconfigpagebase.ui:252
 #, no-c-format
 msgid "18 Mb/s"
 msgstr "18 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 257
-#: rc.cpp:198
+#: ifconfigpagebase.ui:257
 #, no-c-format
 msgid "24 Mb/s"
 msgstr "24 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 262
-#: rc.cpp:201
+#: ifconfigpagebase.ui:262
 #, no-c-format
 msgid "36 Mb/s"
 msgstr "36 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 267
-#: rc.cpp:204
+#: ifconfigpagebase.ui:267
 #, no-c-format
 msgid "48 Mb/s"
 msgstr "48 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 272
-#: rc.cpp:207
+#: ifconfigpagebase.ui:272
 #, no-c-format
 msgid "54 Mb/s"
 msgstr "54 Mb/s"
 
-#. i18n: file ifconfigpagebase.ui line 311
-#: rc.cpp:210
+#: ifconfigpagebase.ui:311
 #, no-c-format
 msgid "Operation mode:"
 msgstr "Operatiemodus:"
 
-#. i18n: file ifconfigpagebase.ui line 314
-#: rc.cpp:213
+#: ifconfigpagebase.ui:314
 #, no-c-format
 msgid ""
-"Operation mode of the card. For standard infrastructure networks, \"Managed\" "
-"is appropriate."
+"Operation mode of the card. For standard infrastructure networks, \"Managed"
+"\" is appropriate."
 msgstr ""
 "Operatiemodus van de kaart. Voor standaardinfrastructuurnetwerken is "
 "\"Beheerd\" geschikt."
 
-#. i18n: file ifconfigpagebase.ui line 320
-#: rc.cpp:216
+#: ifconfigpagebase.ui:320
 #, no-c-format
 msgid "Ad-Hoc"
 msgstr "Ad-Hoc"
 
-#. i18n: file ifconfigpagebase.ui line 325
-#: rc.cpp:219
+#: ifconfigpagebase.ui:325
 #, no-c-format
 msgid "Managed"
 msgstr "Beheerd"
 
-#. i18n: file ifconfigpagebase.ui line 330
-#: rc.cpp:222
+#: ifconfigpagebase.ui:330
 #, no-c-format
 msgid "Repeater"
 msgstr "Herhaler"
 
-#. i18n: file ifconfigpagebase.ui line 335
-#: rc.cpp:225
+#: ifconfigpagebase.ui:335
 #, no-c-format
 msgid "Master"
 msgstr "Master"
 
-#. i18n: file ifconfigpagebase.ui line 340
-#: rc.cpp:228
+#: ifconfigpagebase.ui:340
 #, no-c-format
 msgid "Secondary"
 msgstr "Secondair"
 
-#. i18n: file ifconfigpagebase.ui line 379
-#: rc.cpp:231
+#: ifconfigpagebase.ui:379
 #, no-c-format
 msgid "Execute script on connect"
 msgstr "Script uitvoeren bij verbinden"
 
-#. i18n: file ifconfigpagebase.ui line 382
-#: rc.cpp:234
+#: ifconfigpagebase.ui:382
 #, no-c-format
 msgid ""
-"Activates a script to perform arbitrary operations after associating with the "
-"network."
+"Activates a script to perform arbitrary operations after associating with "
+"the network."
 msgstr ""
-"Activeert een script dat willekeurige operaties uitvoert na het associëren met "
-"het netwerk."
+"Activeert een script dat willekeurige operaties uitvoert na het associëren "
+"met het netwerk."
 
-#. i18n: file ifconfigpagebase.ui line 417
-#: rc.cpp:237
+#: ifconfigpagebase.ui:417
 #, no-c-format
 msgid "Use encryption"
 msgstr "Versleuteling gebruiken"
 
-#. i18n: file ifconfigpagebase.ui line 420
-#: rc.cpp:240
+#: ifconfigpagebase.ui:420
 #, no-c-format
 msgid "Enables WEP encryption."
 msgstr "Activeert WEP-versleuteling."
 
-#. i18n: file ifconfigpagebase.ui line 434
-#: rc.cpp:246
+#: ifconfigpagebase.ui:434
 #, no-c-format
 msgid "Clicking this button opens the Encryption menu."
 msgstr "Deze knop opent het versleutelingsmenu."
 
-#. i18n: file mainconfigbase.ui line 24
-#: rc.cpp:249
+#: mainconfigbase.ui:24
 #, no-c-format
 msgid "General Settings"
 msgstr "Algemene instellingen"
 
-#. i18n: file mainconfigbase.ui line 35
-#: rc.cpp:252
+#: mainconfigbase.ui:35
 #, no-c-format
 msgid "&Activate"
 msgstr "&Activeren"
 
-#. i18n: file mainconfigbase.ui line 38
-#: rc.cpp:255
+#: mainconfigbase.ui:38
 #, no-c-format
 msgid "Applies the configuration to the interface."
 msgstr "Past de configuratie toe op de interface."
 
-#. i18n: file mainconfigbase.ui line 63
-#: rc.cpp:258
+#: mainconfigbase.ui:63
 #, no-c-format
 msgid "Number of configurations:"
 msgstr "Aantal configuraties:"
 
-#. i18n: file mainconfigbase.ui line 66
-#: rc.cpp:261
+#: mainconfigbase.ui:66
 #, no-c-format
 msgid "Modifies the number of configurations that this tool should provide."
 msgstr "Wijzigt het aantal configuraties dat dit programma moet aanleveren."
 
-#. i18n: file mainconfigbase.ui line 74
-#: rc.cpp:264 rc.cpp:270
+#: mainconfigbase.ui:74 mainconfigbase.ui:107
 #, no-c-format
 msgid "Selects which of the configurations is to be applied."
 msgstr "Bepaalt welke configuratie er zal worden toegepast."
 
-#. i18n: file mainconfigbase.ui line 104
-#: rc.cpp:267
+#: mainconfigbase.ui:104
 #, no-c-format
 msgid "Configuration to load:"
 msgstr "Te laden configuratie:"
 
-#. i18n: file mainconfigbase.ui line 149
-#: rc.cpp:273
+#: mainconfigbase.ui:149
 #, no-c-format
 msgid "Load preset &configuration on startup"
 msgstr "Vooringestelde &configuratie laden bij opstarten"
 
-#. i18n: file mainconfigbase.ui line 152
-#: rc.cpp:276
+#: mainconfigbase.ui:152
 #, no-c-format
 msgid ""
-"When this box is checked, your settings are applied when you launch the Control "
-"Center module."
+"When this box is checked, your settings are applied when you launch the "
+"Control Center module."
 msgstr ""
-"Als dit keuzevakje is ingeschakeld, dan worden uw instellingen toegepast als u "
-"de configuratiemodule opstart."
+"Als dit keuzevakje is ingeschakeld, dan worden uw instellingen toegepast als "
+"u de configuratiemodule opstart."
 
 #~ msgid "Unable to autodetect wireless interface."
 #~ msgstr "De draadloze interface kon niet automatisch worden gedetecteerd."