Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

(cherry picked from commit 35b21b24c54a679bcefcb2d129a9d213b3044d7f)

1 files changed, 1068 insertions, 1519 deletions

diff --git a/tde-i18n-sk/messages/tdebase/ksysguard.po b/tde-i18n-sk/messages/tdebase/ksysguard.po
index fb7107afdd4..612a852e3c1 100644
--- a/tde-i18n-sk/messages/tdebase/ksysguard.po
+++ b/tde-i18n-sk/messages/tdebase/ksysguard.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: ksysguard\n"
-"POT-Creation-Date: 2014-11-05 10:15-0600\n"
+"POT-Creation-Date: 2018-12-06 20:16+0100\n"
 "PO-Revision-Date: 2006-12-17 10:04+0100\n"
 "Last-Translator: Jozef Riha <jose1711@gmail.com\n"
 "Language-Team: Slovak <sk@li.org>\n"
@@ -19,1708 +19,1257 @@ msgstr ""
 "X-Generator: KBabel 1.11.4\n"
 "Plural-Forms:  nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
-#: KSysGuardApplet.cc:209 WorkSheet.cc:331
-msgid "Select Display Type"
-msgstr "Vyberte typ displeja"
+#: SystemLoad.sgrd:5
+msgid "CPU Load"
+msgstr "Zaťaž CPU"
 
-#: KSysGuardApplet.cc:210 WorkSheet.cc:332
-msgid "&Signal Plotter"
-msgstr "Kreslenie &signálu"
+#: SystemLoad.sgrd:10
+msgid "Load Average (1 min)"
+msgstr "Priemerná záťaž (1 min)"
 
-#: KSysGuardApplet.cc:211 WorkSheet.cc:333
-msgid "&Multimeter"
-msgstr "&Multimeter"
+#: SystemLoad.sgrd:13
+msgid "Physical Memory"
+msgstr "Fyzická pamäť"
 
-#: KSysGuardApplet.cc:212
-msgid "&Dancing Bars"
-msgstr "&Tancujúce stĺpce"
+#: SystemLoad.sgrd:21
+msgid "Swap Memory"
+msgstr "Odkladací priestor"
 
-#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
-msgid ""
-"The KSysGuard applet does not support displaying of this type of sensor. Please "
-"choose another sensor."
-msgstr ""
-"Applet KSysGuard nepodporuje zobrazovanie tohto typu senzorov. Prosím, vyberte "
-"iný senzor."
+#: KSysGuardApplet.xml:5
+msgid "CPU"
+msgstr "CPU"
 
-#: KSysGuardApplet.cc:318 WorkSheet.cc:94
-#, c-format
-msgid "Cannot open the file %1."
-msgstr "Nemôžem otvoriť súbor %1."
+#: KSysGuardApplet.xml:10
+msgid "Mem"
+msgstr "Pamäť"
 
-#: KSysGuardApplet.cc:327 WorkSheet.cc:102
-msgid "The file %1 does not contain valid XML."
-msgstr "Súbor %1 neobsahuje platné XML."
+#~ msgid "Select Display Type"
+#~ msgstr "Vyberte typ displeja"
 
-#: KSysGuardApplet.cc:334
-msgid ""
-"The file %1 does not contain a valid applet definition, which must have a "
-"document type 'KSysGuardApplet'."
-msgstr ""
-"Súbor %1 neobsahuje platnú definíciu appletu, ktorý musí mať typ dokumentu "
-"'KSysGuardApplet'."
-
-#: KSysGuardApplet.cc:476 WorkSheet.cc:225
-#, c-format
-msgid "Cannot save file %1"
-msgstr "Nemôžem uložiť súbor %1"
-
-#: KSysGuardApplet.cc:488
-msgid "Drag sensors from the TDE System Guard into this cell."
-msgstr "Sem pretiahnite senzory z TDE Strážcu systému."
-
-#: SensorDisplayLib/MultiMeterSettings.cc:26
-msgid "Multimeter Settings"
-msgstr "Nastavenie multimetra"
-
-#: SensorDisplayLib/ProcessController.cc:54
-msgid "Name"
-msgstr "Meno"
-
-#: SensorDisplayLib/ProcessController.cc:55
-msgid "PID"
-msgstr "PID"
-
-#: SensorDisplayLib/ProcessController.cc:56
-msgid "PPID"
-msgstr "PPID"
-
-#: SensorDisplayLib/ProcessController.cc:57
-msgid "UID"
-msgstr "UID"
-
-#: SensorDisplayLib/ProcessController.cc:58
-msgid "GID"
-msgstr "GID"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:170
-#: SensorDisplayLib/FancyPlotterSettings.cc:234
-#: SensorDisplayLib/ProcessController.cc:59
-msgid "Status"
-msgstr "Stav"
-
-#: SensorDisplayLib/ProcessController.cc:60
-#, c-format
-msgid "User%"
-msgstr "Užívateľ%"
-
-#: SensorDisplayLib/ProcessController.cc:61
-#, c-format
-msgid "System%"
-msgstr "Systém%"
-
-#: SensorDisplayLib/ProcessController.cc:62
-#: SensorDisplayLib/ProcessList.cc:783
-msgid "Nice"
-msgstr "Nice"
-
-#: SensorDisplayLib/ProcessController.cc:63
-msgid "VmSize"
-msgstr "VmSize"
-
-#: SensorDisplayLib/ProcessController.cc:64
-msgid "VmRss"
-msgstr "VmRss"
-
-#: SensorDisplayLib/ProcessController.cc:65
-msgid "Login"
-msgstr "Prihlásenie"
-
-#: SensorDisplayLib/ProcessController.cc:66
-msgid "Command"
-msgstr "Príkaz"
-
-#: SensorDisplayLib/ProcessController.cc:97
-msgid "All Processes"
-msgstr "Všetky procesy"
-
-#: SensorDisplayLib/ProcessController.cc:98
-msgid "System Processes"
-msgstr "Systémové procesy"
-
-#: SensorDisplayLib/ProcessController.cc:99
-msgid "User Processes"
-msgstr "Užívateľské procesy"
-
-#: SensorDisplayLib/ProcessController.cc:100
-msgid "Own Processes"
-msgstr "Vlastné procesy"
-
-#: SensorDisplayLib/ProcessController.cc:103
-msgid "&Tree"
-msgstr "&Strom"
-
-#: SensorDisplayLib/ProcessController.cc:116
-msgid "&Refresh"
-msgstr "&Aktualizovať"
-
-#: SensorDisplayLib/ProcessController.cc:123
-msgid "&Kill"
-msgstr "U&končiť úlohu"
-
-#: SensorDisplayLib/ProcessController.cc:206
-msgid "%1: Running Processes"
-msgstr "%1: Bežiace procesy"
-
-#: SensorDisplayLib/ProcessController.cc:239
-msgid "You need to select a process first."
-msgstr "Najprv musíte vybrať proces."
-
-#: SensorDisplayLib/ProcessController.cc:245
-#, c-format
-msgid ""
-"_n: Do you want to kill the selected process?\n"
-"Do you want to kill the %n selected processes?"
-msgstr ""
-"Chcete zabiť %n vybraný proces?\n"
-"Chcete zabiť %n vybrané procesy?\n"
-"Chcete zabiť %n vybraných procesov?"
-
-#: SensorDisplayLib/ProcessController.cc:248
-msgid "Kill Process"
-msgstr "Zabiť proces"
-
-#: SensorDisplayLib/ProcessController.cc:252
-msgid "Kill"
-msgstr "Ukončiť"
-
-#: SensorDisplayLib/ProcessController.cc:258
-msgid "Do not ask again"
-msgstr "Nepýtať sa znova"
-
-#: SensorDisplayLib/ProcessController.cc:344
-#, c-format
-msgid "Error while attempting to kill process %1."
-msgstr "Chyba počas zabíjania procesu %1."
-
-#: SensorDisplayLib/ProcessController.cc:349
-#, c-format
-msgid "Insufficient permissions to kill process %1."
-msgstr "Nedostatočné práva pre zabitie procesu %1."
-
-#: SensorDisplayLib/ProcessController.cc:354
-#: SensorDisplayLib/ProcessController.cc:389
-msgid "Process %1 has already disappeared."
-msgstr "Proces %1 už zmizol."
-
-#: SensorDisplayLib/ProcessController.cc:358
-msgid "Invalid Signal."
-msgstr "Neplatný signál."
-
-#: SensorDisplayLib/ProcessController.cc:379
-#, c-format
-msgid "Error while attempting to renice process %1."
-msgstr "Chyba počas zmene nice procesu %1."
-
-#: SensorDisplayLib/ProcessController.cc:384
-#, c-format
-msgid "Insufficient permissions to renice process %1."
-msgstr "Nedostatočné práva pre zmenu nice procesu %1."
-
-#: SensorDisplayLib/ProcessController.cc:393
-msgid "Invalid argument."
-msgstr "Neplatný argument."
-
-#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
-msgid "It is impossible to connect to '%1'."
-msgstr "Nemožné spojenie s '%1'."
-
-#: SensorDisplayLib/SensorDisplay.cc:162
-msgid "Launch &System Guard"
-msgstr "Spustiť &Strážcu systému"
-
-#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
-msgid "&Properties"
-msgstr "&Vlastnosti"
-
-#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
-msgid "&Remove Display"
-msgstr "&Odstrániť displej"
-
-#: SensorDisplayLib/SensorDisplay.cc:169
-msgid "&Setup Update Interval..."
-msgstr "&Nastaviť interval aktualizácie..."
-
-#: SensorDisplayLib/SensorDisplay.cc:171
-msgid "&Continue Update"
-msgstr "&Pokračovať v aktualizácii"
-
-#: SensorDisplayLib/SensorDisplay.cc:173
-msgid "P&ause Update"
-msgstr "Po&zastaviť aktualizáciu"
-
-#: SensorDisplayLib/SensorDisplay.cc:240
-msgid ""
-"<qt>"
-"<p>This is a sensor display. To customize a sensor display click and hold the "
-"right mouse button on either the frame or the display box and select the <i>"
-"Properties</i> entry from the popup menu. Select <i>Remove</i> "
-"to delete the display from the worksheet.</p>%1</qt>"
-msgstr ""
-"<qt> "
-"<p>Toto je displej senzoru. Pre jeho úpravu kliknite a držte pravé tlačidlo "
-"myši buď na ráme alebo na boxe displeja a vyberte z kontextového menu <i>"
-"Vlastnosti</i>. Displej zo zošita odstránite výberom <i>Odstrániť</i>.</p>"
-"%1</qt>"
+#~ msgid "&Signal Plotter"
+#~ msgstr "Kreslenie &signálu"
 
-#: SensorDisplayLib/DummyDisplay.cc:33
-msgid "Drop Sensor Here"
-msgstr "Tu pustiť senzor"
+#~ msgid "&Multimeter"
+#~ msgstr "&Multimeter"
 
-#: SensorDisplayLib/DummyDisplay.cc:38
-msgid ""
-"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
-"and drop it here. A sensor display will appear that allows you to monitor the "
-"values of the sensor over time."
-msgstr ""
-"Toto je prázdna plocha na pracovnom liste. Z prehliadača senzorov sem nejaký "
-"pretiahnite a pusťte. Zobrazí sa displej pre tento senzor, ktorý vám umožní "
-"monitorovať hodnoty zo senzoru."
+#~ msgid "&Dancing Bars"
+#~ msgstr "&Tancujúce stĺpce"
 
-#: SensorDisplayLib/SensorLoggerSettings.cc:26
-msgid "Sensor Logger Settings"
-msgstr "Nastavenie záznamu signálu"
+#~ msgid ""
+#~ "The KSysGuard applet does not support displaying of this type of sensor. "
+#~ "Please choose another sensor."
+#~ msgstr ""
+#~ "Applet KSysGuard nepodporuje zobrazovanie tohto typu senzorov. Prosím, "
+#~ "vyberte iný senzor."
 
-#: SensorDisplayLib/SensorLogger.cc:136
-msgid "Logging"
-msgstr "Záznam"
+#~ msgid "Cannot open the file %1."
+#~ msgstr "Nemôžem otvoriť súbor %1."
 
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
-#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:129
-#, no-c-format
-msgid "Timer Interval"
-msgstr "Interval časovača"
+#~ msgid "The file %1 does not contain valid XML."
+#~ msgstr "Súbor %1 neobsahuje platné XML."
 
-#: SensorDisplayLib/SensorLogger.cc:138
-msgid "Sensor Name"
-msgstr "Meno senzoru"
+#~ msgid ""
+#~ "The file %1 does not contain a valid applet definition, which must have a "
+#~ "document type 'KSysGuardApplet'."
+#~ msgstr ""
+#~ "Súbor %1 neobsahuje platnú definíciu appletu, ktorý musí mať typ "
+#~ "dokumentu 'KSysGuardApplet'."
 
-#: SensorDisplayLib/SensorLogger.cc:139
-msgid "Host Name"
-msgstr "Hostiteľ"
+#~ msgid "Cannot save file %1"
+#~ msgstr "Nemôžem uložiť súbor %1"
 
-#: SensorDisplayLib/SensorLogger.cc:140
-msgid "Log File"
-msgstr "Súbor so záznamom"
+#~ msgid "Drag sensors from the TDE System Guard into this cell."
+#~ msgstr "Sem pretiahnite senzory z TDE Strážcu systému."
 
-#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
-msgid "Sensor Logger"
-msgstr "Záznam senzoru"
+#~ msgid "Multimeter Settings"
+#~ msgstr "Nastavenie multimetra"
 
-#: SensorDisplayLib/SensorLogger.cc:383
-msgid "&Remove Sensor"
-msgstr "&Odstrániť senzor"
+#~ msgid "Name"
+#~ msgstr "Meno"
 
-#: SensorDisplayLib/SensorLogger.cc:384
-msgid "&Edit Sensor..."
-msgstr "&Upraviť senzor..."
+#~ msgid "PID"
+#~ msgstr "PID"
 
-#: SensorDisplayLib/SensorLogger.cc:396
-msgid "St&op Logging"
-msgstr "&Zastaviť záznam"
+#~ msgid "PPID"
+#~ msgstr "PPID"
 
-#: SensorDisplayLib/SensorLogger.cc:398
-msgid "S&tart Logging"
-msgstr "&Spustiť záznam"
+#~ msgid "UID"
+#~ msgstr "UID"
 
-#: SensorDisplayLib/ProcessList.cc:110
-msgid ""
-"_: process status\n"
-"running"
-msgstr "bežiaci"
+#~ msgid "GID"
+#~ msgstr "GID"
 
-#: SensorDisplayLib/ProcessList.cc:112
-msgid ""
-"_: process status\n"
-"sleeping"
-msgstr "spiaci"
+#~ msgid "Status"
+#~ msgstr "Stav"
 
-#: SensorDisplayLib/ProcessList.cc:114
-msgid ""
-"_: process status\n"
-"disk sleep"
-msgstr "spiaci na disku"
+#~ msgid "User%"
+#~ msgstr "Užívateľ%"
 
-#: SensorDisplayLib/ProcessList.cc:115
-msgid ""
-"_: process status\n"
-"zombie"
-msgstr "zombie"
+#~ msgid "System%"
+#~ msgstr "Systém%"
 
-#: SensorDisplayLib/ProcessList.cc:117
-msgid ""
-"_: process status\n"
-"stopped"
-msgstr "zastavený"
+#~ msgid "Nice"
+#~ msgstr "Nice"
 
-#: SensorDisplayLib/ProcessList.cc:118
-msgid ""
-"_: process status\n"
-"paging"
-msgstr "swapujúci"
+#~ msgid "VmSize"
+#~ msgstr "VmSize"
 
-#: SensorDisplayLib/ProcessList.cc:119
-msgid ""
-"_: process status\n"
-"idle"
-msgstr "nečinný"
+#~ msgid "VmRss"
+#~ msgstr "VmRss"
 
-#: SensorDisplayLib/ProcessList.cc:259
-msgid "Remove Column"
-msgstr "Odstrániť stĺpec"
+#~ msgid "Login"
+#~ msgstr "Prihlásenie"
 
-#: SensorDisplayLib/ProcessList.cc:260
-msgid "Add Column"
-msgstr "Pridať stĺpec"
+#~ msgid "Command"
+#~ msgstr "Príkaz"
 
-#: SensorDisplayLib/ProcessList.cc:261
-msgid "Help on Column"
-msgstr "Pomocník na stĺpec"
+#~ msgid "All Processes"
+#~ msgstr "Všetky procesy"
 
-#: SensorDisplayLib/ProcessList.cc:788
-msgid "Hide Column"
-msgstr "Skryť stĺpec"
+#~ msgid "System Processes"
+#~ msgstr "Systémové procesy"
 
-#: SensorDisplayLib/ProcessList.cc:794
-msgid "Show Column"
-msgstr "Zobraziť stĺpec"
+#~ msgid "User Processes"
+#~ msgstr "Užívateľské procesy"
 
-#: SensorDisplayLib/ProcessList.cc:798
-msgid "Select All Processes"
-msgstr "Vybrať všetky procesy"
+#~ msgid "Own Processes"
+#~ msgstr "Vlastné procesy"
 
-#: SensorDisplayLib/ProcessList.cc:799
-msgid "Unselect All Processes"
-msgstr "Zrušiť výber procesov"
+#~ msgid "&Tree"
+#~ msgstr "&Strom"
 
-#: SensorDisplayLib/ProcessList.cc:805
-msgid "Select All Child Processes"
-msgstr "Vybrať všetkých potomkov"
+#~ msgid "&Refresh"
+#~ msgstr "&Aktualizovať"
 
-#: SensorDisplayLib/ProcessList.cc:806
-msgid "Unselect All Child Processes"
-msgstr "Zrušiť výber potomkov"
+#~ msgid "&Kill"
+#~ msgstr "U&končiť úlohu"
 
-#: SensorDisplayLib/ProcessList.cc:808
-msgid "SIGABRT"
-msgstr "SIGABRT"
+#~ msgid "%1: Running Processes"
+#~ msgstr "%1: Bežiace procesy"
 
-#: SensorDisplayLib/ProcessList.cc:809
-msgid "SIGALRM"
-msgstr "SIGALRM"
+#~ msgid "You need to select a process first."
+#~ msgstr "Najprv musíte vybrať proces."
 
-#: SensorDisplayLib/ProcessList.cc:810
-msgid "SIGCHLD"
-msgstr "SIGCHLD"
+#~ msgid ""
+#~ "_n: Do you want to kill the selected process?\n"
+#~ "Do you want to kill the %n selected processes?"
+#~ msgstr ""
+#~ "Chcete zabiť %n vybraný proces?\n"
+#~ "Chcete zabiť %n vybrané procesy?\n"
+#~ "Chcete zabiť %n vybraných procesov?"
 
-#: SensorDisplayLib/ProcessList.cc:811
-msgid "SIGCONT"
-msgstr "SIGCONT"
+#~ msgid "Kill Process"
+#~ msgstr "Zabiť proces"
 
-#: SensorDisplayLib/ProcessList.cc:812
-msgid "SIGFPE"
-msgstr "SIGFPE"
+#~ msgid "Kill"
+#~ msgstr "Ukončiť"
 
-#: SensorDisplayLib/ProcessList.cc:813
-msgid "SIGHUP"
-msgstr "SIGHUP"
+#~ msgid "Do not ask again"
+#~ msgstr "Nepýtať sa znova"
 
-#: SensorDisplayLib/ProcessList.cc:814
-msgid "SIGILL"
-msgstr "SIGILL"
+#~ msgid "Error while attempting to kill process %1."
+#~ msgstr "Chyba počas zabíjania procesu %1."
 
-#: SensorDisplayLib/ProcessList.cc:815
-msgid "SIGINT"
-msgstr "SIGINT"
+#~ msgid "Insufficient permissions to kill process %1."
+#~ msgstr "Nedostatočné práva pre zabitie procesu %1."
 
-#: SensorDisplayLib/ProcessList.cc:816
-msgid "SIGKILL"
-msgstr "SIGKILL"
+#~ msgid "Process %1 has already disappeared."
+#~ msgstr "Proces %1 už zmizol."
 
-#: SensorDisplayLib/ProcessList.cc:817
-msgid "SIGPIPE"
-msgstr "SIGPIPE"
+#~ msgid "Invalid Signal."
+#~ msgstr "Neplatný signál."
 
-#: SensorDisplayLib/ProcessList.cc:818
-msgid "SIGQUIT"
-msgstr "SIGQUIT"
+#~ msgid "Error while attempting to renice process %1."
+#~ msgstr "Chyba počas zmene nice procesu %1."
 
-#: SensorDisplayLib/ProcessList.cc:819
-msgid "SIGSEGV"
-msgstr "SIGSEGV"
+#~ msgid "Insufficient permissions to renice process %1."
+#~ msgstr "Nedostatočné práva pre zmenu nice procesu %1."
 
-#: SensorDisplayLib/ProcessList.cc:820
-msgid "SIGSTOP"
-msgstr "SIGSTOP"
+#~ msgid "Invalid argument."
+#~ msgstr "Neplatný argument."
 
-#: SensorDisplayLib/ProcessList.cc:821
-msgid "SIGTERM"
-msgstr "SIGTERM"
+#~ msgid "It is impossible to connect to '%1'."
+#~ msgstr "Nemožné spojenie s '%1'."
 
-#: SensorDisplayLib/ProcessList.cc:822
-msgid "SIGTSTP"
-msgstr "SIGTSTP"
+#~ msgid "Launch &System Guard"
+#~ msgstr "Spustiť &Strážcu systému"
 
-#: SensorDisplayLib/ProcessList.cc:823
-msgid "SIGTTIN"
-msgstr "SIGTTIN"
+#~ msgid "&Properties"
+#~ msgstr "&Vlastnosti"
 
-#: SensorDisplayLib/ProcessList.cc:824
-msgid "SIGTTOU"
-msgstr "SIGTTOU"
+#~ msgid "&Remove Display"
+#~ msgstr "&Odstrániť displej"
 
-#: SensorDisplayLib/ProcessList.cc:825
-msgid "SIGUSR1"
-msgstr "SIGUSR1"
+#~ msgid "&Setup Update Interval..."
+#~ msgstr "&Nastaviť interval aktualizácie..."
 
-#: SensorDisplayLib/ProcessList.cc:826
-msgid "SIGUSR2"
-msgstr "SIGUSR2"
+#~ msgid "&Continue Update"
+#~ msgstr "&Pokračovať v aktualizácii"
 
-#: SensorDisplayLib/ProcessList.cc:829
-msgid "Send Signal"
-msgstr "Poslať signál"
+#~ msgid "P&ause Update"
+#~ msgstr "Po&zastaviť aktualizáciu"
 
-#: SensorDisplayLib/ProcessList.cc:837
-msgid "Renice Process..."
-msgstr "Renice procesu..."
+#~ msgid ""
+#~ "<qt><p>This is a sensor display. To customize a sensor display click and "
+#~ "hold the right mouse button on either the frame or the display box and "
+#~ "select the <i>Properties</i> entry from the popup menu. Select <i>Remove</"
+#~ "i> to delete the display from the worksheet.</p>%1</qt>"
+#~ msgstr ""
+#~ "<qt> <p>Toto je displej senzoru. Pre jeho úpravu kliknite a držte pravé "
+#~ "tlačidlo myši buď na ráme alebo na boxe displeja a vyberte z kontextového "
+#~ "menu <i>Vlastnosti</i>. Displej zo zošita odstránite výberom "
+#~ "<i>Odstrániť</i>.</p>%1</qt>"
 
-#: SensorDisplayLib/ProcessList.cc:885
-msgid ""
-"_n: Do you really want to send signal %1 to the selected process?\n"
-"Do you really want to send signal %1 to the %n selected processes?"
-msgstr ""
-"Naozaj chcete poslať signál %1 %n vybranému procesu?\n"
-"Naozaj chcete poslať signál %1 %n vybraným procesom?\n"
-"Naozaj chcete poslať signál %1 %n vybraným procesom?"
+#~ msgid "Drop Sensor Here"
+#~ msgstr "Tu pustiť senzor"
 
-#: SensorDisplayLib/ProcessList.cc:889
-msgid "Send"
-msgstr "Poslať"
+#~ msgid ""
+#~ "This is an empty space in a worksheet. Drag a sensor from the Sensor "
+#~ "Browser and drop it here. A sensor display will appear that allows you to "
+#~ "monitor the values of the sensor over time."
+#~ msgstr ""
+#~ "Toto je prázdna plocha na pracovnom liste. Z prehliadača senzorov sem "
+#~ "nejaký pretiahnite a pusťte. Zobrazí sa displej pre tento senzor, ktorý "
+#~ "vám umožní monitorovať hodnoty zo senzoru."
 
-#: SensorDisplayLib/ReniceDlg.cc:32
-msgid "Renice Process"
-msgstr "Renice procesu"
+#~ msgid "Sensor Logger Settings"
+#~ msgstr "Nastavenie záznamu signálu"
 
-#: SensorDisplayLib/ReniceDlg.cc:40
-msgid ""
-"You are about to change the scheduling priority of\n"
-"process %1. Be aware that only the Superuser (root)\n"
-"can decrease the nice level of a process. The lower\n"
-"the number is the higher the priority.\n"
-"\n"
-"Please enter the desired nice level:"
-msgstr ""
-"Práve chcete zmeniť prioritu plánovania procesu %1.\n"
-"Nezabudnite, že len Superužívateľ (root) môže znížiť\n"
-"nice hodnotu procesu. Čím nižšie číslo, tým vyššia priorita.\n"
-"\n"
-"Prosím zadajte žiadanú hodnotu nice:"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
-#: SensorDisplayLib/LogFile.cc:88 rc.cpp:27
-#, no-c-format
-msgid "Foreground color:"
-msgstr "Farba popredia:"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 102
-#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
-#: ksgrd/StyleSettings.cc:68 rc.cpp:30 rc.cpp:69 rc.cpp:123 rc.cpp:171
-#, no-c-format
-msgid "Background color:"
-msgstr "Farba pozadia:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:43
-msgid "Edit BarGraph Preferences"
-msgstr "Upraviť nastavenie stĺpcového grafu"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:47
-msgid "Range"
-msgstr "Rozsah"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 46
-#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
-#: rc.cpp:21 rc.cpp:60 rc.cpp:75 rc.cpp:159
-#, no-c-format
-msgid "Title"
-msgstr "Titulok"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
-#: SensorDisplayLib/DancingBarsSettings.cc:54
-#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:78
-#, no-c-format
-msgid "Enter the title of the display here."
-msgstr "Tu zadajte titulok displeja."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:59
-msgid "Display Range"
-msgstr "Rozsah displeja"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:63
-#: SensorDisplayLib/FancyPlotterSettings.cc:89
-msgid "Minimum value:"
-msgstr "Minimálna hodnota:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:67
-#: SensorDisplayLib/FancyPlotterSettings.cc:95
-msgid ""
-"Enter the minimum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-"Zadajte minimálnu hodnotu displeja. Ak sú obidve hodnoty 0, použije sa "
-"automatické určenie rozsahu."
+#~ msgid "Logging"
+#~ msgstr "Záznam"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:71
-#: SensorDisplayLib/FancyPlotterSettings.cc:99
-msgid "Maximum value:"
-msgstr "Maximálna hodnota:"
+#~ msgid "Timer Interval"
+#~ msgstr "Interval časovača"
 
-#: SensorDisplayLib/DancingBarsSettings.cc:75
-#: SensorDisplayLib/FancyPlotterSettings.cc:105
-msgid ""
-"Enter the maximum value for the display here. If both values are 0, automatic "
-"range detection is enabled."
-msgstr ""
-"Zadajte maximálnu hodnotu displeja. Ak sú obidve hodnoty 0, použije sa "
-"automatické určenie rozsahu."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
-#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:87
-#, no-c-format
-msgid "Alarms"
-msgstr "Alarmy"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 138
-#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:102 rc.cpp:135
-#, no-c-format
-msgid "Alarm for Minimum Value"
-msgstr "Poplach pri minimálnej hodnote"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:91
-#: SensorDisplayLib/DancingBarsSettings.cc:109
-msgid "Enable alarm"
-msgstr "Povoliť poplach"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 152
-#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:108 rc.cpp:141
-#, no-c-format
-msgid "Enable the minimum value alarm."
-msgstr "Povoliť alarm pre minimálnu hodnotu."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 180
-#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:111 rc.cpp:144
-#, no-c-format
-msgid "Lower limit:"
-msgstr "Dolný limit:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 72
-#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:90 rc.cpp:147
-#, no-c-format
-msgid "Alarm for Maximum Value"
-msgstr "Poplach pri maximálnej hodnote"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 86
-#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:96 rc.cpp:153
-#, no-c-format
-msgid "Enable the maximum value alarm."
-msgstr "Povoliť alarm pre maximálnu hodnotu."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 114
-#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:99 rc.cpp:156
-#, no-c-format
-msgid "Upper limit:"
-msgstr "Horný limit:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:126
-msgid "Look"
-msgstr "Vzhľad"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:129
-msgid "Normal bar color:"
-msgstr "Farba normálneho stĺpca:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:136
-msgid "Out-of-range color:"
-msgstr "Farba pre \"Mimo rozsah\":"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:150
-#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
-msgid "Font size:"
-msgstr "Veľkosť písma:"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:154
-msgid ""
-"This determines the size of the font used to print a label underneath the bars. "
-"Bars are automatically suppressed if text becomes too large, so it is advisable "
-"to use a small font size here."
-msgstr ""
-"Určuje veľkosť použitého písma pre nápisy pod stĺpcami. Stĺpce automaticky "
-"zmiznú v prípade, že niektorý z nich je výrazne väčší. Takže sa hodí sem zadať "
-"malú veľkosť."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:161
-#: SensorDisplayLib/FancyPlotterSettings.cc:224
-msgid "Sensors"
-msgstr "Senzory"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:166
-#: SensorDisplayLib/FancyPlotterSettings.cc:231
-msgid "Host"
-msgstr "Hostiteľ"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:167
-#: SensorDisplayLib/FancyPlotterSettings.cc:232
-msgid "Sensor"
-msgstr "Senzor"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:168
-msgid "Label"
-msgstr "Popis"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:169
-#: SensorDisplayLib/FancyPlotterSettings.cc:233
-msgid "Unit"
-msgstr "Jednotka"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:174
-msgid "Edit..."
-msgstr "Upraviť..."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:176
-msgid "Push this button to configure the label."
-msgstr "Stlačením tlačidla nastavíte popis."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:181
-#: SensorDisplayLib/FancyPlotterSettings.cc:249
-msgid "Push this button to delete the sensor."
-msgstr "Stlačením odstránite senzor."
-
-#: SensorDisplayLib/DancingBarsSettings.cc:356
-msgid "Label of Bar Graph"
-msgstr "Popis stĺpcového grafu"
-
-#: SensorDisplayLib/DancingBarsSettings.cc:357
-msgid "Enter new label:"
-msgstr "Zadajte nový popis:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:47
-msgid "Signal Plotter Settings"
-msgstr "Nastavenie kreslenia signálu"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:57
-msgid "Style"
-msgstr "Štýl"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:60
-msgid "Title:"
-msgstr "Titul:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:69
-msgid "Graph Drawing Style"
-msgstr "Štýl kreslenia grafu"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:71
-msgid "Basic polygons"
-msgstr "Základné mnohouholníky"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:73
-msgid "Original - single line per data point"
-msgstr "Pôvodné - jeden riadok pre bod dát"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:78
-msgid "Scales"
-msgstr "Mierky"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:81
-msgid "Vertical Scale"
-msgstr "Vertikálna mierka"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:85
-msgid "Automatic range detection"
-msgstr "Automatické určenie rozsahu"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:86
-msgid ""
-"Check this box if you want the display range to adapt dynamically to the "
-"currently displayed values; if you do not check this, you have to specify the "
-"range you want in the fields below."
-msgstr ""
-"Ak chcete, aby sa rozsah displeja automaticky prispôsobil aktuálne zobrazeným "
-"hodnotám, použite túto voľbu. Inak musíte ručne zadať hodnoty do polí dole."
+#~ msgid "Sensor Name"
+#~ msgstr "Meno senzoru"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:111
-msgid "Horizontal Scale"
-msgstr "Horizontálna mierka"
+#~ msgid "Host Name"
+#~ msgstr "Hostiteľ"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:120
-msgid "pixel(s) per time period"
-msgstr "bodov za časovú periódu"
+#~ msgid "Log File"
+#~ msgstr "Súbor so záznamom"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:126
-msgid "Grid"
-msgstr "Mriežka"
+#~ msgid "Sensor Logger"
+#~ msgstr "Záznam senzoru"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:129
-msgid "Lines"
-msgstr "Čiary"
+#~ msgid "&Remove Sensor"
+#~ msgstr "&Odstrániť senzor"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:133
-msgid "Vertical lines"
-msgstr "Vertikálne čiary"
+#~ msgid "&Edit Sensor..."
+#~ msgstr "&Upraviť senzor..."
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:134
-msgid "Check this to activate the vertical lines if display is large enough."
-msgstr ""
-"Použite túto voľbu, ak chcete povoliť vertikálne čiary v prípade, že je displej "
-"dosť veľký."
+#~ msgid "St&op Logging"
+#~ msgstr "&Zastaviť záznam"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:137
-msgid "Distance:"
-msgstr "Vzdialenosť:"
+#~ msgid "S&tart Logging"
+#~ msgstr "&Spustiť záznam"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:143
-msgid "Enter the distance between two vertical lines here."
-msgstr "Zadajte vzdialenosť medzi dvoma vertikálnymi čiarami."
+#~ msgid ""
+#~ "_: process status\n"
+#~ "running"
+#~ msgstr "bežiaci"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:147
-msgid "Vertical lines scroll"
-msgstr "Posun vertikálnych čiar"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "sleeping"
+#~ msgstr "spiaci"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:150
-msgid "Horizontal lines"
-msgstr "Horizontálne čiary"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "disk sleep"
+#~ msgstr "spiaci na disku"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:151
-msgid "Check this to enable horizontal lines if display is large enough."
-msgstr ""
-"Použite túto voľbu, ak chcete povoliť horizontálne čiary v prípade, že je "
-"displej dosť veľký."
+#~ msgid ""
+#~ "_: process status\n"
+#~ "zombie"
+#~ msgstr "zombie"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:154
-msgid "Count:"
-msgstr "Počet:"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "stopped"
+#~ msgstr "zastavený"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:160
-msgid "Enter the number of horizontal lines here."
-msgstr "Tu zadajte počet horizontálnych čiar."
+#~ msgid ""
+#~ "_: process status\n"
+#~ "paging"
+#~ msgstr "swapujúci"
 
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
-#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:18
-#, no-c-format
-msgid "Text"
-msgstr "Text"
+#~ msgid ""
+#~ "_: process status\n"
+#~ "idle"
+#~ msgstr "nečinný"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:172
-msgid "Labels"
-msgstr "Popisy"
+#~ msgid "Remove Column"
+#~ msgstr "Odstrániť stĺpec"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:173
-msgid ""
-"Check this box if horizontal lines should be decorated with the values they "
-"mark."
-msgstr ""
-"Toto použite, ak majú horizontálne čiary obsahovať hodnoty, ktoré označujú."
+#~ msgid "Add Column"
+#~ msgstr "Pridať stĺpec"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:185
-msgid "Top bar"
-msgstr "Horný pruh"
+#~ msgid "Help on Column"
+#~ msgstr "Pomocník na stĺpec"
 
-#: SensorDisplayLib/FancyPlotterSettings.cc:186
-msgid ""
-"Check this to active the display title bar. This is probably only useful for "
-"applet displays. The bar is only visible if the display is large enough."
-msgstr ""
-"Toto použite, ak chcete aktívny titulok. To má asi zmysel iba pre applety. Pruh "
-"je viditeľný, ak je displej dosť veľký."
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 64
-#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:24 rc.cpp:63 rc.cpp:114
-#: rc.cpp:162
-#, no-c-format
-msgid "Colors"
-msgstr "Farby"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:196
-msgid "Vertical lines:"
-msgstr "Vertikálne čiary:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:203
-msgid "Horizontal lines:"
-msgstr "Horizontálne čiary:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:210
-msgid "Background:"
-msgstr "Pozadie:"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:242
-msgid "Set Color..."
-msgstr "Nastaviť farbu..."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:244
-msgid "Push this button to configure the color of the sensor in the diagram."
-msgstr "Stlačením tlačidla môžete nastaviť farbu senzoru v diagrame."
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:252
-msgid "Move Up"
-msgstr "Presunúť hore"
-
-#: SensorDisplayLib/FancyPlotterSettings.cc:256
-msgid "Move Down"
-msgstr "Presunúť dole"
-
-#: SensorDisplayLib/ListViewSettings.cc:26
-msgid "List View Settings"
-msgstr "Nastavenie pohľadu zoznamu"
-
-#: KSGAppletSettings.cc:34
-msgid "System Guard Settings"
-msgstr "Nastavenia strážcu systému"
-
-#: KSGAppletSettings.cc:42
-msgid "Number of displays:"
-msgstr "Počet displejov:"
-
-#: KSGAppletSettings.cc:50
-msgid "Size ratio:"
-msgstr "Pomer veľkosti:"
-
-#: KSGAppletSettings.cc:54
-#, c-format
-msgid "%"
-msgstr "%"
-
-#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
-msgid "Update interval:"
-msgstr "Interval aktualizácie:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
-#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
-#: rc.cpp:132
-#, no-c-format
-msgid " sec"
-msgstr " sek"
-
-#: WorkSheet.cc:109
-msgid ""
-"The file %1 does not contain a valid worksheet definition, which must have a "
-"document type 'KSysGuardWorkSheet'."
-msgstr ""
-"Súbor %1 neobsahuje platnú definíciu pracovného zošitu, ktorý musí mať typ "
-"dokumentu 'KSysGuardWorkSheet'."
-
-#: WorkSheet.cc:125
-msgid "The file %1 has an invalid worksheet size."
-msgstr "Súbor %1 má neplatnú veľkosť pracovného zošitu."
-
-#: WorkSheet.cc:273
-msgid "The clipboard does not contain a valid display description."
-msgstr "Schránka neobsahuje platný popis displeja."
-
-#: WorkSheet.cc:334
-msgid "&BarGraph"
-msgstr "&Stĺpcový graf"
-
-#: WorkSheet.cc:335
-msgid "S&ensorLogger"
-msgstr "&Záznam senzoru"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
-#: rc.cpp:15
-#, no-c-format
-msgid "Log File Settings"
-msgstr "Nastavenie súboru so záznamom"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
-#: rc.cpp:36
-#, no-c-format
-msgid "Select Font..."
-msgstr "Vybrať písmo..."
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
-#: rc.cpp:39
-#, no-c-format
-msgid "Filter"
-msgstr "Filter"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
-#: rc.cpp:42
-#, no-c-format
-msgid "&Add"
-msgstr "&Pridať"
-
-#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
-#: rc.cpp:48
-#, no-c-format
-msgid "&Change"
-msgstr "&Zmeniť"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 91
-#: rc.cpp:66 rc.cpp:165
-#, no-c-format
-msgid "Text color:"
-msgstr "Farba textu:"
-
-#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
-#: ksgrd/StyleSettings.cc:61 rc.cpp:72
-#, no-c-format
-msgid "Alarm color:"
-msgstr "Farba poplachu:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
-#: rc.cpp:81
-#, no-c-format
-msgid "&Show unit"
-msgstr "Zobraziť &jednotku"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
-#: rc.cpp:84
-#, no-c-format
-msgid "Enable this to append the unit to the title of the display."
-msgstr "Pre pridávanie jednotky k titulku displeja použite túto voľbu."
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 83
-#: rc.cpp:93 rc.cpp:150
-#, no-c-format
-msgid "E&nable alarm"
-msgstr "Po&voliť poplach"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 149
-#: rc.cpp:105 rc.cpp:138
-#, no-c-format
-msgid "&Enable alarm"
-msgstr "&Povoliť poplach"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
-#: rc.cpp:117
-#, no-c-format
-msgid "Normal digit color:"
-msgstr "Farba normálnych čísel:"
-
-#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
-#: rc.cpp:120
-#, no-c-format
-msgid "Alarm digit color:"
-msgstr "Farba poplašných čísel:"
-
-#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
-#: rc.cpp:168
-#, no-c-format
-msgid "Grid color:"
-msgstr "Farba mriežky:"
-
-#. i18n: file SystemLoad.sgrd line 5
-#: ksgrd/SensorManager.cc:50 rc.cpp:173
-msgid "CPU Load"
-msgstr "Zaťaž CPU"
+#~ msgid "Hide Column"
+#~ msgstr "Skryť stĺpec"
 
-#. i18n: file SystemLoad.sgrd line 10
-#: ksgrd/SensorManager.cc:103 rc.cpp:175
-msgid "Load Average (1 min)"
-msgstr "Priemerná záťaž (1 min)"
+#~ msgid "Show Column"
+#~ msgstr "Zobraziť stĺpec"
 
-#. i18n: file SystemLoad.sgrd line 13
-#: ksgrd/SensorManager.cc:56 rc.cpp:177
-msgid "Physical Memory"
-msgstr "Fyzická pamäť"
+#~ msgid "Select All Processes"
+#~ msgstr "Vybrať všetky procesy"
 
-#. i18n: file SystemLoad.sgrd line 21
-#: ksgrd/SensorManager.cc:57 rc.cpp:179
-msgid "Swap Memory"
-msgstr "Odkladací priestor"
+#~ msgid "Unselect All Processes"
+#~ msgstr "Zrušiť výber procesov"
 
-#. i18n: file KSysGuardApplet.xml line 5
-#: rc.cpp:181
-msgid "CPU"
-msgstr "CPU"
+#~ msgid "Select All Child Processes"
+#~ msgstr "Vybrať všetkých potomkov"
 
-#. i18n: file KSysGuardApplet.xml line 10
-#: rc.cpp:183
-msgid "Mem"
-msgstr "Pamäť"
+#~ msgid "Unselect All Child Processes"
+#~ msgstr "Zrušiť výber potomkov"
 
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Stanislav Višňovský,Pavol Cvengroš"
+#~ msgid "SIGABRT"
+#~ msgstr "SIGABRT"
 
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "visnovsky@nenya.ms.mff.cuni.cz,orpheus@hq.alert.sk"
+#~ msgid "SIGALRM"
+#~ msgstr "SIGALRM"
 
-#: ksgrd/SensorManager.cc:51
-msgid "Idle Load"
-msgstr "Nečinnosť"
+#~ msgid "SIGCHLD"
+#~ msgstr "SIGCHLD"
 
-#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
-#: ksysguard.cc:171
-msgid "System Load"
-msgstr "Systém"
+#~ msgid "SIGCONT"
+#~ msgstr "SIGCONT"
 
-#: ksgrd/SensorManager.cc:53
-msgid "Nice Load"
-msgstr "Nice"
+#~ msgid "SIGFPE"
+#~ msgstr "SIGFPE"
 
-#: ksgrd/SensorManager.cc:54
-msgid "User Load"
-msgstr "Užívateľ"
+#~ msgid "SIGHUP"
+#~ msgstr "SIGHUP"
 
-#: ksgrd/SensorManager.cc:55
-msgid "Memory"
-msgstr "Pamäť"
+#~ msgid "SIGILL"
+#~ msgstr "SIGILL"
 
-#: ksgrd/SensorManager.cc:58
-msgid "Cached Memory"
-msgstr "Vyrovnávacia pamäť"
+#~ msgid "SIGINT"
+#~ msgstr "SIGINT"
 
-#: ksgrd/SensorManager.cc:59
-msgid "Buffered Memory"
-msgstr "Bufferovaná pamäť"
+#~ msgid "SIGKILL"
+#~ msgstr "SIGKILL"
 
-#: ksgrd/SensorManager.cc:60
-msgid "Used Memory"
-msgstr "Použitá pamäť"
+#~ msgid "SIGPIPE"
+#~ msgstr "SIGPIPE"
 
-#: ksgrd/SensorManager.cc:61
-msgid "Application Memory"
-msgstr "Pamäť aplikácie"
+#~ msgid "SIGQUIT"
+#~ msgstr "SIGQUIT"
 
-#: ksgrd/SensorManager.cc:62
-msgid "Free Memory"
-msgstr "Voľná pamäť"
+#~ msgid "SIGSEGV"
+#~ msgstr "SIGSEGV"
 
-#: ksgrd/SensorManager.cc:63
-msgid "Process Count"
-msgstr "Počet procesov"
+#~ msgid "SIGSTOP"
+#~ msgstr "SIGSTOP"
 
-#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
-msgid "Process Controller"
-msgstr "Ovládanie procesov"
+#~ msgid "SIGTERM"
+#~ msgstr "SIGTERM"
 
-#: ksgrd/SensorManager.cc:65
-msgid "Disk Throughput"
-msgstr "Prenos disku"
+#~ msgid "SIGTSTP"
+#~ msgstr "SIGTSTP"
 
-#: ksgrd/SensorManager.cc:66
-msgid ""
-"_: CPU Load\n"
-"Load"
-msgstr "Zaťaženie"
+#~ msgid "SIGTTIN"
+#~ msgstr "SIGTTIN"
 
-#: ksgrd/SensorManager.cc:67
-msgid "Total Accesses"
-msgstr "Celkom prístupov"
+#~ msgid "SIGTTOU"
+#~ msgstr "SIGTTOU"
 
-#: ksgrd/SensorManager.cc:68
-msgid "Read Accesses"
-msgstr "Čítanie"
+#~ msgid "SIGUSR1"
+#~ msgstr "SIGUSR1"
 
-#: ksgrd/SensorManager.cc:69
-msgid "Write Accesses"
-msgstr "Zápis"
+#~ msgid "SIGUSR2"
+#~ msgstr "SIGUSR2"
 
-#: ksgrd/SensorManager.cc:70
-msgid "Read Data"
-msgstr "Čítanie dát"
+#~ msgid "Send Signal"
+#~ msgstr "Poslať signál"
 
-#: ksgrd/SensorManager.cc:71
-msgid "Write Data"
-msgstr "Zápis dát"
+#~ msgid "Renice Process..."
+#~ msgstr "Renice procesu..."
 
-#: ksgrd/SensorManager.cc:72
-msgid "Pages In"
-msgstr "Stránok dnu"
+#~ msgid ""
+#~ "_n: Do you really want to send signal %1 to the selected process?\n"
+#~ "Do you really want to send signal %1 to the %n selected processes?"
+#~ msgstr ""
+#~ "Naozaj chcete poslať signál %1 %n vybranému procesu?\n"
+#~ "Naozaj chcete poslať signál %1 %n vybraným procesom?\n"
+#~ "Naozaj chcete poslať signál %1 %n vybraným procesom?"
 
-#: ksgrd/SensorManager.cc:73
-msgid "Pages Out"
-msgstr "Stránok von"
+#~ msgid "Send"
+#~ msgstr "Poslať"
 
-#: ksgrd/SensorManager.cc:74
-msgid "Context Switches"
-msgstr "Prepnutí kontextu"
+#~ msgid "Renice Process"
+#~ msgstr "Renice procesu"
 
-#: ksgrd/SensorManager.cc:75
-msgid "Network"
-msgstr "Sieť"
+#~ msgid ""
+#~ "You are about to change the scheduling priority of\n"
+#~ "process %1. Be aware that only the Superuser (root)\n"
+#~ "can decrease the nice level of a process. The lower\n"
+#~ "the number is the higher the priority.\n"
+#~ "\n"
+#~ "Please enter the desired nice level:"
+#~ msgstr ""
+#~ "Práve chcete zmeniť prioritu plánovania procesu %1.\n"
+#~ "Nezabudnite, že len Superužívateľ (root) môže znížiť\n"
+#~ "nice hodnotu procesu. Čím nižšie číslo, tým vyššia priorita.\n"
+#~ "\n"
+#~ "Prosím zadajte žiadanú hodnotu nice:"
 
-#: ksgrd/SensorManager.cc:76
-msgid "Interfaces"
-msgstr "Rozhrania"
+#~ msgid "Foreground color:"
+#~ msgstr "Farba popredia:"
 
-#: ksgrd/SensorManager.cc:77
-msgid "Receiver"
-msgstr "Príjemca"
+#~ msgid "Background color:"
+#~ msgstr "Farba pozadia:"
 
-#: ksgrd/SensorManager.cc:78
-msgid "Transmitter"
-msgstr "Prenos"
+#~ msgid "Edit BarGraph Preferences"
+#~ msgstr "Upraviť nastavenie stĺpcového grafu"
 
-#: ksgrd/SensorManager.cc:79
-msgid "Data"
-msgstr "Dáta"
+#~ msgid "Range"
+#~ msgstr "Rozsah"
 
-#: ksgrd/SensorManager.cc:80
-msgid "Compressed Packets"
-msgstr "Komprimované pakety"
+#~ msgid "Title"
+#~ msgstr "Titulok"
 
-#: ksgrd/SensorManager.cc:81
-msgid "Dropped Packets"
-msgstr "Zahodené pakety"
+#~ msgid "Enter the title of the display here."
+#~ msgstr "Tu zadajte titulok displeja."
 
-#: ksgrd/SensorManager.cc:82
-msgid "Errors"
-msgstr "Chyby"
+#~ msgid "Display Range"
+#~ msgstr "Rozsah displeja"
 
-#: ksgrd/SensorManager.cc:83
-msgid "FIFO Overruns"
-msgstr "Pretečenia FIFO"
+#~ msgid "Minimum value:"
+#~ msgstr "Minimálna hodnota:"
 
-#: ksgrd/SensorManager.cc:84
-msgid "Frame Errors"
-msgstr "Chyby rámcov"
+#~ msgid ""
+#~ "Enter the minimum value for the display here. If both values are 0, "
+#~ "automatic range detection is enabled."
+#~ msgstr ""
+#~ "Zadajte minimálnu hodnotu displeja. Ak sú obidve hodnoty 0, použije sa "
+#~ "automatické určenie rozsahu."
 
-#: ksgrd/SensorManager.cc:85
-msgid "Multicast"
-msgstr "Multicast"
+#~ msgid "Maximum value:"
+#~ msgstr "Maximálna hodnota:"
 
-#: ksgrd/SensorManager.cc:86
-msgid "Packets"
-msgstr "Pakety"
-
-#: ksgrd/SensorManager.cc:87
-msgid "Carrier"
-msgstr "Nosná"
-
-#: ksgrd/SensorManager.cc:88
-msgid "Collisions"
-msgstr "Kolízie"
-
-#: ksgrd/SensorManager.cc:89
-msgid "Sockets"
-msgstr "Sokety"
-
-#: ksgrd/SensorManager.cc:90
-msgid "Total Number"
-msgstr "Celkom"
-
-#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
-msgid "Table"
-msgstr "Tabuľka"
+#~ msgid ""
+#~ "Enter the maximum value for the display here. If both values are 0, "
+#~ "automatic range detection is enabled."
+#~ msgstr ""
+#~ "Zadajte maximálnu hodnotu displeja. Ak sú obidve hodnoty 0, použije sa "
+#~ "automatické určenie rozsahu."
 
-#: ksgrd/SensorManager.cc:92
-msgid "Advanced Power Management"
-msgstr "Pokročilá správa napájania (APM)"
-
-#: ksgrd/SensorManager.cc:93
-msgid "ACPI"
-msgstr "ACPI"
+#~ msgid "Alarms"
+#~ msgstr "Alarmy"
 
-#: ksgrd/SensorManager.cc:94
-msgid "Thermal Zone"
-msgstr "Termálna zóna"
+#~ msgid "Alarm for Minimum Value"
+#~ msgstr "Poplach pri minimálnej hodnote"
 
-#: ksgrd/SensorManager.cc:95
-msgid "Temperature"
-msgstr "Teplota"
+#~ msgid "Enable alarm"
+#~ msgstr "Povoliť poplach"
 
-#: ksgrd/SensorManager.cc:96
-msgid "Fan"
-msgstr "Vetrák"
+#~ msgid "Enable the minimum value alarm."
+#~ msgstr "Povoliť alarm pre minimálnu hodnotu."
 
-#: ksgrd/SensorManager.cc:97
-msgid "State"
-msgstr "Stav"
+#~ msgid "Lower limit:"
+#~ msgstr "Dolný limit:"
 
-#: ksgrd/SensorManager.cc:98
-msgid "Battery"
-msgstr "Batérie"
+#~ msgid "Alarm for Maximum Value"
+#~ msgstr "Poplach pri maximálnej hodnote"
 
-#: ksgrd/SensorManager.cc:99
-msgid "Battery Charge"
-msgstr "Nabitie batérií"
+#~ msgid "Enable the maximum value alarm."
+#~ msgstr "Povoliť alarm pre maximálnu hodnotu."
 
-#: ksgrd/SensorManager.cc:100
-msgid "Battery Usage"
-msgstr "Použitie batérie"
+#~ msgid "Upper limit:"
+#~ msgstr "Horný limit:"
 
-#: ksgrd/SensorManager.cc:101
-msgid "Remaining Time"
-msgstr "Zostávajúci čas"
+#~ msgid "Look"
+#~ msgstr "Vzhľad"
 
-#: ksgrd/SensorManager.cc:102
-msgid "Interrupts"
-msgstr "Prerušenia"
+#~ msgid "Normal bar color:"
+#~ msgstr "Farba normálneho stĺpca:"
 
-#: ksgrd/SensorManager.cc:104
-msgid "Load Average (5 min)"
-msgstr "Priemerná záťaž (5 min)"
+#~ msgid "Out-of-range color:"
+#~ msgstr "Farba pre \"Mimo rozsah\":"
 
-#: ksgrd/SensorManager.cc:105
-msgid "Load Average (15 min)"
-msgstr "Priemerná záťaž (15 min)"
+#~ msgid "Font size:"
+#~ msgstr "Veľkosť písma:"
 
-#: ksgrd/SensorManager.cc:106
-msgid "Clock Frequency"
-msgstr "Frekvencia hodín"
+#~ msgid ""
+#~ "This determines the size of the font used to print a label underneath the "
+#~ "bars. Bars are automatically suppressed if text becomes too large, so it "
+#~ "is advisable to use a small font size here."
+#~ msgstr ""
+#~ "Určuje veľkosť použitého písma pre nápisy pod stĺpcami. Stĺpce "
+#~ "automaticky zmiznú v prípade, že niektorý z nich je výrazne väčší. Takže "
+#~ "sa hodí sem zadať malú veľkosť."
 
-#: ksgrd/SensorManager.cc:107
-msgid "Hardware Sensors"
-msgstr "Hardwarové senzory"
+#~ msgid "Sensors"
+#~ msgstr "Senzory"
 
-#: ksgrd/SensorManager.cc:108
-msgid "Partition Usage"
-msgstr "Využitie oddielu"
+#~ msgid "Host"
+#~ msgstr "Hostiteľ"
 
-#: ksgrd/SensorManager.cc:109
-msgid "Used Space"
-msgstr "Využitý priestor"
+#~ msgid "Sensor"
+#~ msgstr "Senzor"
 
-#: ksgrd/SensorManager.cc:110
-msgid "Free Space"
-msgstr "Voľný priestor"
+#~ msgid "Label"
+#~ msgstr "Popis"
 
-#: ksgrd/SensorManager.cc:111
-msgid "Fill Level"
-msgstr "Úroveň naplnenia"
+#~ msgid "Unit"
+#~ msgstr "Jednotka"
 
-#: ksgrd/SensorManager.cc:115
-#, c-format
-msgid "CPU%1"
-msgstr "CPU%1"
-
-#: ksgrd/SensorManager.cc:117
-#, c-format
-msgid "Disk%1"
-msgstr "Disk%1"
-
-#: ksgrd/SensorManager.cc:122
-#, c-format
-msgid "Fan%1"
-msgstr "Vetrák%1"
-
-#: ksgrd/SensorManager.cc:124
-#, c-format
-msgid "Temperature%1"
-msgstr "Teplota%1"
+#~ msgid "Edit..."
+#~ msgstr "Upraviť..."
 
-#: ksgrd/SensorManager.cc:127
-msgid "Total"
-msgstr "Celkom"
+#~ msgid "Push this button to configure the label."
+#~ msgstr "Stlačením tlačidla nastavíte popis."
 
-#: ksgrd/SensorManager.cc:133
-#, c-format
-msgid "Int%1"
-msgstr "Int%1"
-
-#: ksgrd/SensorManager.cc:140
-msgid ""
-"_: the unit 1 per second\n"
-"1/s"
-msgstr "1/s"
+#~ msgid "Push this button to delete the sensor."
+#~ msgstr "Stlačením odstránite senzor."
 
-#: ksgrd/SensorManager.cc:141
-msgid "kBytes"
-msgstr "kBajtov"
+#~ msgid "Label of Bar Graph"
+#~ msgstr "Popis stĺpcového grafu"
 
-#: ksgrd/SensorManager.cc:142
-msgid ""
-"_: the unit minutes\n"
-"min"
-msgstr "min"
+#~ msgid "Enter new label:"
+#~ msgstr "Zadajte nový popis:"
 
-#: ksgrd/SensorManager.cc:143
-msgid ""
-"_: the frequency unit\n"
-"MHz"
-msgstr "MHz"
-
-#: ksgrd/SensorManager.cc:146
-msgid "Integer Value"
-msgstr "Celočíselná hodnota"
-
-#: ksgrd/SensorManager.cc:147
-msgid "Floating Point Value"
-msgstr "Reálna hodnota"
-
-#: ksgrd/SensorManager.cc:289
-msgid "Connection to %1 has been lost."
-msgstr "Spojenie s %1 bolo stratené."
-
-#: ksgrd/StyleSettings.cc:41
-msgid "Global Style Settings"
-msgstr "Globálne nastavenie štýlu"
-
-#: ksgrd/StyleSettings.cc:44
-msgid "Display Style"
-msgstr "Štýl displeja"
-
-#: ksgrd/StyleSettings.cc:47
-msgid "First foreground color:"
-msgstr "Prvá farba popredia:"
-
-#: ksgrd/StyleSettings.cc:54
-msgid "Second foreground color:"
-msgstr "Druhá farba popredia:"
-
-#: ksgrd/StyleSettings.cc:85
-msgid "Sensor Colors"
-msgstr "Farby senzorov"
-
-#: ksgrd/StyleSettings.cc:91
-msgid "Change Color..."
-msgstr "Upraviť farbu..."
-
-#: ksgrd/StyleSettings.cc:166
-#, c-format
-msgid "Color %1"
-msgstr "Farba %1"
-
-#: ksgrd/SensorSocketAgent.cc:104
-msgid "Connection to %1 refused"
-msgstr "Spojenie na %1 odmietnuté"
-
-#: ksgrd/SensorSocketAgent.cc:108
-msgid "Host %1 not found"
-msgstr "Počítač %1 nenájdený"
-
-#: ksgrd/SensorSocketAgent.cc:112
-#, c-format
-msgid "Timeout at host %1"
-msgstr "Timeout na počítači %1"
-
-#: ksgrd/SensorSocketAgent.cc:116
-#, c-format
-msgid "Network failure host %1"
-msgstr "Sieťová chyba počítača %1"
-
-#: ksgrd/TimerSettings.cc:36
-msgid "Timer Settings"
-msgstr "Nastavenie časovača"
-
-#: ksgrd/TimerSettings.cc:43
-msgid "Use update interval of worksheet"
-msgstr "Použiť interval aktualizácie zošita"
-
-#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
-msgid "All displays of the sheet are updated at the rate specified here."
-msgstr "Všetky displeje v zošite budú aktualizované v tomto intervale."
-
-#: ksgrd/HostConnector.cc:37
-msgid "Connect Host"
-msgstr "Spojiť sa s hostiteľom"
-
-#: ksgrd/HostConnector.cc:44
-msgid "Host:"
-msgstr "Hostiteľ:"
-
-#: ksgrd/HostConnector.cc:54
-msgid "Enter the name of the host you want to connect to."
-msgstr "Zadajte meno hostiteľa, ku ktorému sa chcete pripojiť."
-
-#: ksgrd/HostConnector.cc:61
-msgid "Connection Type"
-msgstr "Typ spojenia"
-
-#: ksgrd/HostConnector.cc:66
-msgid "ssh"
-msgstr "ssh"
-
-#: ksgrd/HostConnector.cc:69
-msgid "Select this to use the secure shell to login to the remote host."
-msgstr ""
-"Toto použite, ak sa chcete prihlásiť na vzdialený počítač pomocou secure shell."
+#~ msgid "Signal Plotter Settings"
+#~ msgstr "Nastavenie kreslenia signálu"
 
-#: ksgrd/HostConnector.cc:72
-msgid "rsh"
-msgstr "rsh"
+#~ msgid "Style"
+#~ msgstr "Štýl"
 
-#: ksgrd/HostConnector.cc:73
-msgid "Select this to use the remote shell to login to the remote host."
-msgstr ""
-"Toto použite, ak sa chcete prihlásiť na vzdialený počítač pomocou remote shell."
+#~ msgid "Title:"
+#~ msgstr "Titul:"
 
-#: ksgrd/HostConnector.cc:76
-msgid "Daemon"
-msgstr "Démon"
+#~ msgid "Graph Drawing Style"
+#~ msgstr "Štýl kreslenia grafu"
 
-#: ksgrd/HostConnector.cc:77
-msgid ""
-"Select this if you want to connect to a ksysguard daemon that is running on the "
-"machine you want to connect to, and is listening for client requests."
-msgstr ""
-"Toto použite, ak sa chcete pripojiť k démonovi ksysguard, ktorý beží na "
-"počítači, ku ktorému sa chcete pripojiť, a čaká na požiadavky klientov."
+#~ msgid "Basic polygons"
+#~ msgstr "Základné mnohouholníky"
 
-#: ksgrd/HostConnector.cc:80
-msgid "Custom command"
-msgstr "Vlastný príkaz"
+#~ msgid "Original - single line per data point"
+#~ msgstr "Pôvodné - jeden riadok pre bod dát"
 
-#: ksgrd/HostConnector.cc:81
-msgid ""
-"Select this to use the command you entered below to start ksysguardd on the "
-"remote host."
-msgstr ""
-"Toto použite, ak chcete na spustenie ksysguardd na vzdialenom počítači použiť "
-"príkaz zadaný nižšie."
+#~ msgid "Scales"
+#~ msgstr "Mierky"
 
-#: ksgrd/HostConnector.cc:84
-msgid "Port:"
-msgstr "Port:"
+#~ msgid "Vertical Scale"
+#~ msgstr "Vertikálna mierka"
 
-#: ksgrd/HostConnector.cc:90
-msgid ""
-"Enter the port number on which the ksysguard daemon is listening for "
-"connections."
-msgstr "Zadajte číslo portu, na ktorom počúva démon ksysguard na spojenia."
+#~ msgid "Automatic range detection"
+#~ msgstr "Automatické určenie rozsahu"
 
-#: ksgrd/HostConnector.cc:93
-msgid "e.g.  3112"
-msgstr "napr. 3112"
+#~ msgid ""
+#~ "Check this box if you want the display range to adapt dynamically to the "
+#~ "currently displayed values; if you do not check this, you have to specify "
+#~ "the range you want in the fields below."
+#~ msgstr ""
+#~ "Ak chcete, aby sa rozsah displeja automaticky prispôsobil aktuálne "
+#~ "zobrazeným hodnotám, použite túto voľbu. Inak musíte ručne zadať hodnoty "
+#~ "do polí dole."
 
-#: ksgrd/HostConnector.cc:96
-msgid "Command:"
-msgstr "Príkaz:"
+#~ msgid "Horizontal Scale"
+#~ msgstr "Horizontálna mierka"
 
-#: ksgrd/HostConnector.cc:105
-msgid "Enter the command that runs ksysguardd on the host you want to monitor."
-msgstr ""
-"Zadajte príkaz pre spustenie ksysguardd na hostiteľovi, ktorého chcete "
-"monitorovať."
+#~ msgid "pixel(s) per time period"
+#~ msgstr "bodov za časovú periódu"
 
-#: ksgrd/HostConnector.cc:109
-msgid "e.g. ssh -l root remote.host.org ksysguardd"
-msgstr "napr. ssh -l root vzdialeny.pocitac.org ksysguardd"
+#~ msgid "Grid"
+#~ msgstr "Mriežka"
 
-#: ksgrd/SensorAgent.cc:88
-msgid ""
-"Message from %1:\n"
-"%2"
-msgstr ""
-"Správa od %1:\n"
-"%2"
+#~ msgid "Lines"
+#~ msgstr "Čiary"
 
-#: SensorBrowser.cc:77
-msgid "Sensor Browser"
-msgstr "Prehliadač senzoru"
+#~ msgid "Vertical lines"
+#~ msgstr "Vertikálne čiary"
 
-#: SensorBrowser.cc:78
-msgid "Sensor Type"
-msgstr "Typ senzoru"
+#~ msgid ""
+#~ "Check this to activate the vertical lines if display is large enough."
+#~ msgstr ""
+#~ "Použite túto voľbu, ak chcete povoliť vertikálne čiary v prípade, že je "
+#~ "displej dosť veľký."
 
-#: SensorBrowser.cc:81
-msgid "Drag sensors to empty cells of a worksheet or the panel applet."
-msgstr ""
-"Ťahajte senzory do prázdnych buniek v pracovnom zošite alebo do appletu v "
-"paneli."
+#~ msgid "Distance:"
+#~ msgstr "Vzdialenosť:"
 
-#: SensorBrowser.cc:88
-msgid ""
-"The sensor browser lists the connected hosts and the sensors that they provide. "
-"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
-"display will appear that visualizes the values provided by the sensor. Some "
-"sensor displays can display values of multiple sensors. Simply drag other "
-"sensors on to the display to add more sensors."
-msgstr ""
-"Prehliadač senzorov zobrazuje zoznam pripojených hostiteľov a senzorov, ktoré "
-"sú na nich k dispozícii. Myšou senzory pretiahnite do pracovného listu alebo "
-"appletu. Zobrazí sa displej, ktorý predstavuje hodnoty získané zo senzoru. "
-"Niektoré displeje sú schopné zobrazovať hodnoty viacerých senzorov. Jednoducho "
-"na nich pustite ďalšie senzory, ktoré chcete pridať."
+#~ msgid "Enter the distance between two vertical lines here."
+#~ msgstr "Zadajte vzdialenosť medzi dvoma vertikálnymi čiarami."
 
-#: SensorBrowser.cc:148
-msgid "Drag sensors to empty fields in a worksheet."
-msgstr "Ťahajte senzory do prázdnych polí v pracovnom zošite."
+#~ msgid "Vertical lines scroll"
+#~ msgstr "Posun vertikálnych čiar"
 
-#: WorkSheetSettings.cc:41
-msgid "Worksheet Properties"
-msgstr "Vlastnosti pracovného zošita"
-
-#: WorkSheetSettings.cc:67
-msgid "Rows:"
-msgstr "Riadky:"
-
-#: WorkSheetSettings.cc:76
-msgid "Columns:"
-msgstr "Stĺpce:"
-
-#: WorkSheetSettings.cc:97
-msgid "Enter the number of rows the sheet should have."
-msgstr "Zadajte počet riadkov zošitu."
-
-#: WorkSheetSettings.cc:98
-msgid "Enter the number of columns the sheet should have."
-msgstr "Zadajte počet stĺpcov zošitu."
-
-#: WorkSheetSettings.cc:100
-msgid "Enter the title of the worksheet here."
-msgstr "Tu zadajte titulok pracovného zošitu."
-
-#: ksysguard.cc:64
-msgid "TDE system guard"
-msgstr "TDE Strážca systému"
-
-#: ksysguard.cc:74 ksysguard.cc:556
-msgid "TDE System Guard"
-msgstr "TDE Strážca systému"
-
-#: ksysguard.cc:100
-msgid "88888 Processes"
-msgstr "88888 Procesov"
-
-#: ksysguard.cc:101
-msgid "Memory: 88888888888 kB used, 88888888888 kB free"
-msgstr "Pamäť: 88888888888 kB použitých, 88888888888 kB voľných"
-
-#: ksysguard.cc:103
-msgid "Swap: 888888888 kB used, 888888888 kB free"
-msgstr "Swap: 888888888 kB použitých, 888888888 kB voľných"
-
-#: ksysguard.cc:108
-msgid "&New Worksheet..."
-msgstr "&Nový pracovný list..."
-
-#: ksysguard.cc:111
-msgid "Import Worksheet..."
-msgstr "Importovať pracovný list..."
-
-#: ksysguard.cc:114
-msgid "&Import Recent Worksheet"
-msgstr "&Importovať ostatný pracovný list"
-
-#: ksysguard.cc:117
-msgid "&Remove Worksheet"
-msgstr "&Odstrániť pracovný list"
-
-#: ksysguard.cc:120
-msgid "&Export Worksheet..."
-msgstr "&Exportovať pracovný list..."
-
-#: ksysguard.cc:125
-msgid "C&onnect Host..."
-msgstr "&Spojiť sa s hostiteľom..."
-
-#: ksysguard.cc:127
-msgid "D&isconnect Host"
-msgstr "&Odpojiť sa od hostiteľa"
-
-#: ksysguard.cc:133
-msgid "&Worksheet Properties"
-msgstr "&Vlastnosti pracovného zošita"
-
-#: ksysguard.cc:136
-msgid "Load Standard Sheets"
-msgstr "Načítať štandardné listy"
-
-#: ksysguard.cc:140
-msgid "Configure &Style..."
-msgstr "Nastaviť &štýl..."
-
-#: ksysguard.cc:157
-msgid "Do you really want to restore the default worksheets?"
-msgstr "Naozaj chcete obnoviť štandardné pracovné listy?"
-
-#: ksysguard.cc:158
-msgid "Reset All Worksheets"
-msgstr "Obnoviť všetky pracovné listy"
+#~ msgid "Horizontal lines"
+#~ msgstr "Horizontálne čiary"
 
-#: ksysguard.cc:159
-msgid "Reset"
-msgstr "Obnoviť"
+#~ msgid "Check this to enable horizontal lines if display is large enough."
+#~ msgstr ""
+#~ "Použite túto voľbu, ak chcete povoliť horizontálne čiary v prípade, že je "
+#~ "displej dosť veľký."
 
-#: Workspace.cc:105 ksysguard.cc:176
-msgid "Process Table"
-msgstr "Tabuľka procesov"
+#~ msgid "Count:"
+#~ msgstr "Počet:"
 
-#: ksysguard.cc:436
-#, c-format
-msgid ""
-"_n: 1 Process\n"
-"%n Processes"
-msgstr ""
-"%n proces\n"
-"%n procesy\n"
-"%n procesov"
+#~ msgid "Enter the number of horizontal lines here."
+#~ msgstr "Tu zadajte počet horizontálnych čiar."
 
-#: ksysguard.cc:446
-msgid "Memory: %1 %2 used, %3 %4 free"
-msgstr "Pamäť: %1 %2 použitých, %3 %4 voľných"
+#~ msgid "Text"
+#~ msgstr "Text"
 
-#: ksysguard.cc:504
-msgid "No swap space available"
-msgstr "Nie je k dispozícii miesto na swap"
+#~ msgid "Labels"
+#~ msgstr "Popisy"
 
-#: ksysguard.cc:506
-msgid "Swap: %1 %2 used, %3 %4 free"
-msgstr "Swap: %1 %2 použitých, %3 %4 voľných"
+#~ msgid ""
+#~ "Check this box if horizontal lines should be decorated with the values "
+#~ "they mark."
+#~ msgstr ""
+#~ "Toto použite, ak majú horizontálne čiary obsahovať hodnoty, ktoré "
+#~ "označujú."
 
-#: ksysguard.cc:515
-msgid "Show only process list of local host"
-msgstr "Zobrazovať iba zoznam lokálnych procesov"
+#~ msgid "Top bar"
+#~ msgstr "Horný pruh"
 
-#: ksysguard.cc:516
-msgid "Optional worksheet files to load"
-msgstr "Nepovinné súbory pracovného listu pre načítanie"
+#~ msgid ""
+#~ "Check this to active the display title bar. This is probably only useful "
+#~ "for applet displays. The bar is only visible if the display is large "
+#~ "enough."
+#~ msgstr ""
+#~ "Toto použite, ak chcete aktívny titulok. To má asi zmysel iba pre "
+#~ "applety. Pruh je viditeľný, ak je displej dosť veľký."
 
-#: ksysguard.cc:558
-msgid "(c) 1996-2002 The KSysGuard Developers"
-msgstr "(c) 1996-2002 Vývojári KSysGuard"
+#~ msgid "Colors"
+#~ msgstr "Farby"
 
-#: ksysguard.cc:566
-msgid ""
-"Solaris Support\n"
-"Parts derived (by permission) from the sunos5\n"
-"module of William LeFebvre's \"top\" utility."
-msgstr ""
-"Podpora Solarisu\n"
-"Časti odvodené (s povolením) z sunos5\n"
-"modulu z \"top\" pomôcky od Williama LeFebvra."
+#~ msgid "Vertical lines:"
+#~ msgstr "Vertikálne čiary:"
 
-#: Workspace.cc:53
-msgid ""
-"This is your work space. It holds your worksheets. You need to create a new "
-"worksheet (Menu File->New) before you can drag sensors here."
-msgstr ""
-"Toto je vaša pracovná plocha. Obsahuje vaše pracovné listy. Musíte vytvoriť "
-"nový list (menu Súbor->Nový) pred ťahaním a pustením senzorov sem."
+#~ msgid "Horizontal lines:"
+#~ msgstr "Horizontálne čiary:"
 
-#: Workspace.cc:135
-#, c-format
-msgid "Sheet %1"
-msgstr "Zošit %1"
+#~ msgid "Background:"
+#~ msgstr "Pozadie:"
 
-#: Workspace.cc:165 Workspace.cc:305
-msgid ""
-"The worksheet '%1' contains unsaved data.\n"
-"Do you want to save the worksheet?"
-msgstr ""
-"Zošit '%1' obsahuje neuložené dáta.\n"
-"Chcete uložiť tento zošit?"
+#~ msgid "Set Color..."
+#~ msgstr "Nastaviť farbu..."
+
+#~ msgid ""
+#~ "Push this button to configure the color of the sensor in the diagram."
+#~ msgstr "Stlačením tlačidla môžete nastaviť farbu senzoru v diagrame."
+
+#~ msgid "Move Up"
+#~ msgstr "Presunúť hore"
+
+#~ msgid "Move Down"
+#~ msgstr "Presunúť dole"
+
+#~ msgid "List View Settings"
+#~ msgstr "Nastavenie pohľadu zoznamu"
+
+#~ msgid "System Guard Settings"
+#~ msgstr "Nastavenia strážcu systému"
+
+#~ msgid "Number of displays:"
+#~ msgstr "Počet displejov:"
+
+#~ msgid "Size ratio:"
+#~ msgstr "Pomer veľkosti:"
+
+#~ msgid "%"
+#~ msgstr "%"
+
+#~ msgid "Update interval:"
+#~ msgstr "Interval aktualizácie:"
+
+#~ msgid " sec"
+#~ msgstr " sek"
+
+#~ msgid ""
+#~ "The file %1 does not contain a valid worksheet definition, which must "
+#~ "have a document type 'KSysGuardWorkSheet'."
+#~ msgstr ""
+#~ "Súbor %1 neobsahuje platnú definíciu pracovného zošitu, ktorý musí mať "
+#~ "typ dokumentu 'KSysGuardWorkSheet'."
+
+#~ msgid "The file %1 has an invalid worksheet size."
+#~ msgstr "Súbor %1 má neplatnú veľkosť pracovného zošitu."
+
+#~ msgid "The clipboard does not contain a valid display description."
+#~ msgstr "Schránka neobsahuje platný popis displeja."
+
+#~ msgid "&BarGraph"
+#~ msgstr "&Stĺpcový graf"
+
+#~ msgid "S&ensorLogger"
+#~ msgstr "&Záznam senzoru"
+
+#~ msgid "Log File Settings"
+#~ msgstr "Nastavenie súboru so záznamom"
+
+#~ msgid "Select Font..."
+#~ msgstr "Vybrať písmo..."
+
+#~ msgid "Filter"
+#~ msgstr "Filter"
+
+#~ msgid "&Add"
+#~ msgstr "&Pridať"
+
+#~ msgid "&Change"
+#~ msgstr "&Zmeniť"
+
+#~ msgid "Text color:"
+#~ msgstr "Farba textu:"
+
+#~ msgid "Alarm color:"
+#~ msgstr "Farba poplachu:"
+
+#~ msgid "&Show unit"
+#~ msgstr "Zobraziť &jednotku"
+
+#~ msgid "Enable this to append the unit to the title of the display."
+#~ msgstr "Pre pridávanie jednotky k titulku displeja použite túto voľbu."
+
+#~ msgid "E&nable alarm"
+#~ msgstr "Po&voliť poplach"
+
+#~ msgid "&Enable alarm"
+#~ msgstr "&Povoliť poplach"
+
+#~ msgid "Normal digit color:"
+#~ msgstr "Farba normálnych čísel:"
+
+#~ msgid "Alarm digit color:"
+#~ msgstr "Farba poplašných čísel:"
+
+#~ msgid "Grid color:"
+#~ msgstr "Farba mriežky:"
+
+#~ msgid ""
+#~ "_: NAME OF TRANSLATORS\n"
+#~ "Your names"
+#~ msgstr "Stanislav Višňovský,Pavol Cvengroš"
+
+#~ msgid ""
+#~ "_: EMAIL OF TRANSLATORS\n"
+#~ "Your emails"
+#~ msgstr "visnovsky@nenya.ms.mff.cuni.cz,orpheus@hq.alert.sk"
+
+#~ msgid "Idle Load"
+#~ msgstr "Nečinnosť"
+
+#~ msgid "System Load"
+#~ msgstr "Systém"
+
+#~ msgid "Nice Load"
+#~ msgstr "Nice"
+
+#~ msgid "User Load"
+#~ msgstr "Užívateľ"
+
+#~ msgid "Memory"
+#~ msgstr "Pamäť"
+
+#~ msgid "Cached Memory"
+#~ msgstr "Vyrovnávacia pamäť"
+
+#~ msgid "Buffered Memory"
+#~ msgstr "Bufferovaná pamäť"
+
+#~ msgid "Used Memory"
+#~ msgstr "Použitá pamäť"
+
+#~ msgid "Application Memory"
+#~ msgstr "Pamäť aplikácie"
+
+#~ msgid "Free Memory"
+#~ msgstr "Voľná pamäť"
+
+#~ msgid "Process Count"
+#~ msgstr "Počet procesov"
+
+#~ msgid "Process Controller"
+#~ msgstr "Ovládanie procesov"
+
+#~ msgid "Disk Throughput"
+#~ msgstr "Prenos disku"
+
+#~ msgid ""
+#~ "_: CPU Load\n"
+#~ "Load"
+#~ msgstr "Zaťaženie"
+
+#~ msgid "Total Accesses"
+#~ msgstr "Celkom prístupov"
+
+#~ msgid "Read Accesses"
+#~ msgstr "Čítanie"
+
+#~ msgid "Write Accesses"
+#~ msgstr "Zápis"
+
+#~ msgid "Read Data"
+#~ msgstr "Čítanie dát"
+
+#~ msgid "Write Data"
+#~ msgstr "Zápis dát"
+
+#~ msgid "Pages In"
+#~ msgstr "Stránok dnu"
+
+#~ msgid "Pages Out"
+#~ msgstr "Stránok von"
+
+#~ msgid "Context Switches"
+#~ msgstr "Prepnutí kontextu"
+
+#~ msgid "Network"
+#~ msgstr "Sieť"
+
+#~ msgid "Interfaces"
+#~ msgstr "Rozhrania"
+
+#~ msgid "Receiver"
+#~ msgstr "Príjemca"
+
+#~ msgid "Transmitter"
+#~ msgstr "Prenos"
+
+#~ msgid "Data"
+#~ msgstr "Dáta"
+
+#~ msgid "Compressed Packets"
+#~ msgstr "Komprimované pakety"
+
+#~ msgid "Dropped Packets"
+#~ msgstr "Zahodené pakety"
+
+#~ msgid "Errors"
+#~ msgstr "Chyby"
+
+#~ msgid "FIFO Overruns"
+#~ msgstr "Pretečenia FIFO"
+
+#~ msgid "Frame Errors"
+#~ msgstr "Chyby rámcov"
+
+#~ msgid "Multicast"
+#~ msgstr "Multicast"
+
+#~ msgid "Packets"
+#~ msgstr "Pakety"
+
+#~ msgid "Carrier"
+#~ msgstr "Nosná"
+
+#~ msgid "Collisions"
+#~ msgstr "Kolízie"
+
+#~ msgid "Sockets"
+#~ msgstr "Sokety"
+
+#~ msgid "Total Number"
+#~ msgstr "Celkom"
+
+#~ msgid "Table"
+#~ msgstr "Tabuľka"
+
+#~ msgid "Advanced Power Management"
+#~ msgstr "Pokročilá správa napájania (APM)"
+
+#~ msgid "ACPI"
+#~ msgstr "ACPI"
+
+#~ msgid "Thermal Zone"
+#~ msgstr "Termálna zóna"
+
+#~ msgid "Temperature"
+#~ msgstr "Teplota"
+
+#~ msgid "Fan"
+#~ msgstr "Vetrák"
+
+#~ msgid "State"
+#~ msgstr "Stav"
+
+#~ msgid "Battery"
+#~ msgstr "Batérie"
+
+#~ msgid "Battery Charge"
+#~ msgstr "Nabitie batérií"
+
+#~ msgid "Battery Usage"
+#~ msgstr "Použitie batérie"
+
+#~ msgid "Remaining Time"
+#~ msgstr "Zostávajúci čas"
+
+#~ msgid "Interrupts"
+#~ msgstr "Prerušenia"
+
+#~ msgid "Load Average (5 min)"
+#~ msgstr "Priemerná záťaž (5 min)"
+
+#~ msgid "Load Average (15 min)"
+#~ msgstr "Priemerná záťaž (15 min)"
+
+#~ msgid "Clock Frequency"
+#~ msgstr "Frekvencia hodín"
+
+#~ msgid "Hardware Sensors"
+#~ msgstr "Hardwarové senzory"
+
+#~ msgid "Partition Usage"
+#~ msgstr "Využitie oddielu"
+
+#~ msgid "Used Space"
+#~ msgstr "Využitý priestor"
+
+#~ msgid "Free Space"
+#~ msgstr "Voľný priestor"
+
+#~ msgid "Fill Level"
+#~ msgstr "Úroveň naplnenia"
+
+#~ msgid "CPU%1"
+#~ msgstr "CPU%1"
+
+#~ msgid "Disk%1"
+#~ msgstr "Disk%1"
+
+#~ msgid "Fan%1"
+#~ msgstr "Vetrák%1"
+
+#~ msgid "Temperature%1"
+#~ msgstr "Teplota%1"
+
+#~ msgid "Total"
+#~ msgstr "Celkom"
+
+#~ msgid "Int%1"
+#~ msgstr "Int%1"
+
+#~ msgid ""
+#~ "_: the unit 1 per second\n"
+#~ "1/s"
+#~ msgstr "1/s"
+
+#~ msgid "kBytes"
+#~ msgstr "kBajtov"
+
+#~ msgid ""
+#~ "_: the unit minutes\n"
+#~ "min"
+#~ msgstr "min"
+
+#~ msgid ""
+#~ "_: the frequency unit\n"
+#~ "MHz"
+#~ msgstr "MHz"
+
+#~ msgid "Integer Value"
+#~ msgstr "Celočíselná hodnota"
+
+#~ msgid "Floating Point Value"
+#~ msgstr "Reálna hodnota"
+
+#~ msgid "Connection to %1 has been lost."
+#~ msgstr "Spojenie s %1 bolo stratené."
+
+#~ msgid "Global Style Settings"
+#~ msgstr "Globálne nastavenie štýlu"
+
+#~ msgid "Display Style"
+#~ msgstr "Štýl displeja"
+
+#~ msgid "First foreground color:"
+#~ msgstr "Prvá farba popredia:"
+
+#~ msgid "Second foreground color:"
+#~ msgstr "Druhá farba popredia:"
+
+#~ msgid "Sensor Colors"
+#~ msgstr "Farby senzorov"
+
+#~ msgid "Change Color..."
+#~ msgstr "Upraviť farbu..."
+
+#~ msgid "Color %1"
+#~ msgstr "Farba %1"
+
+#~ msgid "Connection to %1 refused"
+#~ msgstr "Spojenie na %1 odmietnuté"
+
+#~ msgid "Host %1 not found"
+#~ msgstr "Počítač %1 nenájdený"
+
+#~ msgid "Timeout at host %1"
+#~ msgstr "Timeout na počítači %1"
+
+#~ msgid "Network failure host %1"
+#~ msgstr "Sieťová chyba počítača %1"
+
+#~ msgid "Timer Settings"
+#~ msgstr "Nastavenie časovača"
+
+#~ msgid "Use update interval of worksheet"
+#~ msgstr "Použiť interval aktualizácie zošita"
+
+#~ msgid "All displays of the sheet are updated at the rate specified here."
+#~ msgstr "Všetky displeje v zošite budú aktualizované v tomto intervale."
+
+#~ msgid "Connect Host"
+#~ msgstr "Spojiť sa s hostiteľom"
+
+#~ msgid "Host:"
+#~ msgstr "Hostiteľ:"
+
+#~ msgid "Enter the name of the host you want to connect to."
+#~ msgstr "Zadajte meno hostiteľa, ku ktorému sa chcete pripojiť."
+
+#~ msgid "Connection Type"
+#~ msgstr "Typ spojenia"
+
+#~ msgid "ssh"
+#~ msgstr "ssh"
+
+#~ msgid "Select this to use the secure shell to login to the remote host."
+#~ msgstr ""
+#~ "Toto použite, ak sa chcete prihlásiť na vzdialený počítač pomocou secure "
+#~ "shell."
+
+#~ msgid "rsh"
+#~ msgstr "rsh"
+
+#~ msgid "Select this to use the remote shell to login to the remote host."
+#~ msgstr ""
+#~ "Toto použite, ak sa chcete prihlásiť na vzdialený počítač pomocou remote "
+#~ "shell."
+
+#~ msgid "Daemon"
+#~ msgstr "Démon"
+
+#~ msgid ""
+#~ "Select this if you want to connect to a ksysguard daemon that is running "
+#~ "on the machine you want to connect to, and is listening for client "
+#~ "requests."
+#~ msgstr ""
+#~ "Toto použite, ak sa chcete pripojiť k démonovi ksysguard, ktorý beží na "
+#~ "počítači, ku ktorému sa chcete pripojiť, a čaká na požiadavky klientov."
+
+#~ msgid "Custom command"
+#~ msgstr "Vlastný príkaz"
+
+#~ msgid ""
+#~ "Select this to use the command you entered below to start ksysguardd on "
+#~ "the remote host."
+#~ msgstr ""
+#~ "Toto použite, ak chcete na spustenie ksysguardd na vzdialenom počítači "
+#~ "použiť príkaz zadaný nižšie."
+
+#~ msgid "Port:"
+#~ msgstr "Port:"
+
+#~ msgid ""
+#~ "Enter the port number on which the ksysguard daemon is listening for "
+#~ "connections."
+#~ msgstr "Zadajte číslo portu, na ktorom počúva démon ksysguard na spojenia."
+
+#~ msgid "e.g.  3112"
+#~ msgstr "napr. 3112"
+
+#~ msgid "Command:"
+#~ msgstr "Príkaz:"
+
+#~ msgid ""
+#~ "Enter the command that runs ksysguardd on the host you want to monitor."
+#~ msgstr ""
+#~ "Zadajte príkaz pre spustenie ksysguardd na hostiteľovi, ktorého chcete "
+#~ "monitorovať."
+
+#~ msgid "e.g. ssh -l root remote.host.org ksysguardd"
+#~ msgstr "napr. ssh -l root vzdialeny.pocitac.org ksysguardd"
+
+#~ msgid ""
+#~ "Message from %1:\n"
+#~ "%2"
+#~ msgstr ""
+#~ "Správa od %1:\n"
+#~ "%2"
+
+#~ msgid "Sensor Browser"
+#~ msgstr "Prehliadač senzoru"
+
+#~ msgid "Sensor Type"
+#~ msgstr "Typ senzoru"
+
+#~ msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+#~ msgstr ""
+#~ "Ťahajte senzory do prázdnych buniek v pracovnom zošite alebo do appletu v "
+#~ "paneli."
+
+#~ msgid ""
+#~ "The sensor browser lists the connected hosts and the sensors that they "
+#~ "provide. Click and drag sensors into drop zones of a worksheet or the "
+#~ "panel applet. A display will appear that visualizes the values provided "
+#~ "by the sensor. Some sensor displays can display values of multiple "
+#~ "sensors. Simply drag other sensors on to the display to add more sensors."
+#~ msgstr ""
+#~ "Prehliadač senzorov zobrazuje zoznam pripojených hostiteľov a senzorov, "
+#~ "ktoré sú na nich k dispozícii. Myšou senzory pretiahnite do pracovného "
+#~ "listu alebo appletu. Zobrazí sa displej, ktorý predstavuje hodnoty "
+#~ "získané zo senzoru. Niektoré displeje sú schopné zobrazovať hodnoty "
+#~ "viacerých senzorov. Jednoducho na nich pustite ďalšie senzory, ktoré "
+#~ "chcete pridať."
+
+#~ msgid "Drag sensors to empty fields in a worksheet."
+#~ msgstr "Ťahajte senzory do prázdnych polí v pracovnom zošite."
+
+#~ msgid "Worksheet Properties"
+#~ msgstr "Vlastnosti pracovného zošita"
+
+#~ msgid "Rows:"
+#~ msgstr "Riadky:"
+
+#~ msgid "Columns:"
+#~ msgstr "Stĺpce:"
+
+#~ msgid "Enter the number of rows the sheet should have."
+#~ msgstr "Zadajte počet riadkov zošitu."
+
+#~ msgid "Enter the number of columns the sheet should have."
+#~ msgstr "Zadajte počet stĺpcov zošitu."
+
+#~ msgid "Enter the title of the worksheet here."
+#~ msgstr "Tu zadajte titulok pracovného zošitu."
+
+#~ msgid "TDE system guard"
+#~ msgstr "TDE Strážca systému"
+
+#~ msgid "TDE System Guard"
+#~ msgstr "TDE Strážca systému"
+
+#~ msgid "88888 Processes"
+#~ msgstr "88888 Procesov"
+
+#~ msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+#~ msgstr "Pamäť: 88888888888 kB použitých, 88888888888 kB voľných"
+
+#~ msgid "Swap: 888888888 kB used, 888888888 kB free"
+#~ msgstr "Swap: 888888888 kB použitých, 888888888 kB voľných"
+
+#~ msgid "&New Worksheet..."
+#~ msgstr "&Nový pracovný list..."
+
+#~ msgid "Import Worksheet..."
+#~ msgstr "Importovať pracovný list..."
+
+#~ msgid "&Import Recent Worksheet"
+#~ msgstr "&Importovať ostatný pracovný list"
+
+#~ msgid "&Remove Worksheet"
+#~ msgstr "&Odstrániť pracovný list"
+
+#~ msgid "&Export Worksheet..."
+#~ msgstr "&Exportovať pracovný list..."
+
+#~ msgid "C&onnect Host..."
+#~ msgstr "&Spojiť sa s hostiteľom..."
+
+#~ msgid "D&isconnect Host"
+#~ msgstr "&Odpojiť sa od hostiteľa"
+
+#~ msgid "&Worksheet Properties"
+#~ msgstr "&Vlastnosti pracovného zošita"
+
+#~ msgid "Load Standard Sheets"
+#~ msgstr "Načítať štandardné listy"
+
+#~ msgid "Configure &Style..."
+#~ msgstr "Nastaviť &štýl..."
+
+#~ msgid "Do you really want to restore the default worksheets?"
+#~ msgstr "Naozaj chcete obnoviť štandardné pracovné listy?"
+
+#~ msgid "Reset All Worksheets"
+#~ msgstr "Obnoviť všetky pracovné listy"
+
+#~ msgid "Reset"
+#~ msgstr "Obnoviť"
+
+#~ msgid "Process Table"
+#~ msgstr "Tabuľka procesov"
+
+#~ msgid ""
+#~ "_n: 1 Process\n"
+#~ "%n Processes"
+#~ msgstr ""
+#~ "%n proces\n"
+#~ "%n procesy\n"
+#~ "%n procesov"
+
+#~ msgid "Memory: %1 %2 used, %3 %4 free"
+#~ msgstr "Pamäť: %1 %2 použitých, %3 %4 voľných"
+
+#~ msgid "No swap space available"
+#~ msgstr "Nie je k dispozícii miesto na swap"
+
+#~ msgid "Swap: %1 %2 used, %3 %4 free"
+#~ msgstr "Swap: %1 %2 použitých, %3 %4 voľných"
+
+#~ msgid "Show only process list of local host"
+#~ msgstr "Zobrazovať iba zoznam lokálnych procesov"
+
+#~ msgid "Optional worksheet files to load"
+#~ msgstr "Nepovinné súbory pracovného listu pre načítanie"
+
+#~ msgid "(c) 1996-2002 The KSysGuard Developers"
+#~ msgstr "(c) 1996-2002 Vývojári KSysGuard"
+
+#~ msgid ""
+#~ "Solaris Support\n"
+#~ "Parts derived (by permission) from the sunos5\n"
+#~ "module of William LeFebvre's \"top\" utility."
+#~ msgstr ""
+#~ "Podpora Solarisu\n"
+#~ "Časti odvodené (s povolením) z sunos5\n"
+#~ "modulu z \"top\" pomôcky od Williama LeFebvra."
+
+#~ msgid ""
+#~ "This is your work space. It holds your worksheets. You need to create a "
+#~ "new worksheet (Menu File->New) before you can drag sensors here."
+#~ msgstr ""
+#~ "Toto je vaša pracovná plocha. Obsahuje vaše pracovné listy. Musíte "
+#~ "vytvoriť nový list (menu Súbor->Nový) pred ťahaním a pustením senzorov "
+#~ "sem."
+
+#~ msgid "Sheet %1"
+#~ msgstr "Zošit %1"
+
+#~ msgid ""
+#~ "The worksheet '%1' contains unsaved data.\n"
+#~ "Do you want to save the worksheet?"
+#~ msgstr ""
+#~ "Zošit '%1' obsahuje neuložené dáta.\n"
+#~ "Chcete uložiť tento zošit?"
 
-#: Workspace.cc:181 Workspace.cc:235
-msgid "*.sgrd|Sensor Files"
-msgstr "*.sgrd|Súbory senzorov"
+#~ msgid "*.sgrd|Sensor Files"
+#~ msgstr "*.sgrd|Súbory senzorov"
 
-#: Workspace.cc:184
-msgid "Select Worksheet to Load"
-msgstr "Výber pracovného listu pre načítanie"
+#~ msgid "Select Worksheet to Load"
+#~ msgstr "Výber pracovného listu pre načítanie"
 
-#: Workspace.cc:229 Workspace.cc:269
-msgid "You do not have a worksheet that could be saved."
-msgstr "Neexistujú žiadne pracovné listy, ktoré by mohli byť uložené."
+#~ msgid "You do not have a worksheet that could be saved."
+#~ msgstr "Neexistujú žiadne pracovné listy, ktoré by mohli byť uložené."
 
-#: Workspace.cc:239
-msgid "Save Current Worksheet As"
-msgstr "Uložiť aktuálny pracovný list ako"
+#~ msgid "Save Current Worksheet As"
+#~ msgstr "Uložiť aktuálny pracovný list ako"
 
-#: Workspace.cc:320
-msgid "There are no worksheets that could be deleted."
-msgstr "Neexistujú žiadne pracovné listy, ktoré by mohli byť odstránené."
+#~ msgid "There are no worksheets that could be deleted."
+#~ msgstr "Neexistujú žiadne pracovné listy, ktoré by mohli byť odstránené."
 
-#: Workspace.cc:448
-msgid "Cannot find file ProcessTable.sgrd."
-msgstr "Nenájdený súbor ProcessTable.sgrd."
+#~ msgid "Cannot find file ProcessTable.sgrd."
+#~ msgstr "Nenájdený súbor ProcessTable.sgrd."
 
 #~ msgid "#"
 #~ msgstr "#"