Second part of prior commit

1 files changed, 579 insertions, 0 deletions

diff --git a/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po b/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po
new file mode 100644
index 00000000000..9bd328aee97
--- /dev/null
+++ b/tde-i18n-zh_CN/messages/tdenetwork/kcmlanbrowser.po
@@ -0,0 +1,579 @@
+# translation of kcmlanbrowser.po to Simplified Chinese
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# Xuedong Zhang <zxd@bu.edu>, 2001
+# Xiong Jiang <jxiong@offtopic.org>, 2002
+# Funda Wang <fundawang@linux.net.cn>, 2002, 2003
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmlanbrowser\n"
+"POT-Creation-Date: 2005-08-10 10:18+0200\n"
+"PO-Revision-Date: 2005-08-02 17:23+0800\n"
+"Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
+"Language-Team: Simplified Chinese <i18n-translation@lists.linux.net.cn>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0\n"
+
+#: setupwizard.cpp:63
+msgid "LISa Network Neighborhood Setup"
+msgstr "LISa 网络邻居设置"
+
+#: setupwizard.cpp:71 setupwizard.cpp:512
+msgid "Advanced Settings"
+msgstr "高级设置"
+
+#: setupwizard.cpp:126
+msgid ""
+"<qt>"
+"<p>This wizard will ask you a few questions about your network.</p> "
+"<p>Usually you can simply keep the suggested settings.</p> "
+"<p>After you have finished the wizard, you will be able to browse and use "
+"shared resources on your LAN, not only Samba/Windows shares, but also FTP, HTTP "
+"and NFS resources exactly the same way.</p> "
+"<p>Therefore you need to setup the <i>LAN Information Server</i> "
+"(LISa) on your machine. Think of the LISa server as an FTP or HTTP server; it "
+"has to be run by root, it should be started during the boot process and only "
+"one LISa server can run on one machine.</qt>"
+msgstr ""
+"<qt>"
+"<p>此向导将询问几个关于您网络的问题。</p>"
+"<p>通常您只需保留推荐设置。</p>"
+"<p>在您完成此向导后，您就可以用相同方式浏览并使用您局域网上的各种共享资源，不仅包括 Samba/Windows 共享，还包括 FTP，HTTP 和 NFS "
+"资源。</p>"
+"<p>因此，您需要在计算机上正确设置 <i>LAN 信息服务器</i> (LISa)。LISa 服务器类似于 FTP 或 HTTP 服务器；该程序必须由 "
+"root 运行，必须在启动阶段运行，并且一台机器上只能运行一个 LISa 服务器。</qt>"
+
+#: setupwizard.cpp:149
+msgid ""
+"<qt>"
+"<p>More than one network interface card was found on your system.</p>"
+"<p>Please choose the one to which your LAN is connected.</p></qt>"
+msgstr "<qt><p>在您的系统上找到了多张网卡。</p><p>请选择您连接局域网的那一张网卡。</p></qt>"
+
+#: setupwizard.cpp:164
+msgid ""
+"<qt>"
+"<p><b>No network interface card was found on your system.</b></p>"
+"<p>Possible reason: no network card is installed. You probably want to cancel "
+"now or enter your IP address and network manually</p>Example: <code>"
+"192.168.0.1/255.255.255.0</code>.</qt>"
+msgstr ""
+"<qt>"
+"<p><b>未在系统中找到网卡。</b></p>"
+"<p>可能的原因：没有安装网卡。您可能想要现在取消，或者手工输入您的 IP 地址和网络。</p>示例：<code>"
+"192.168.0.1/255.255.255.0</code>。</qt>"
+
+#: setupwizard.cpp:185
+msgid "There are two ways LISa can search hosts on your network."
+msgstr "LISa 使用两种方法搜索您网络上的主机。"
+
+#: setupwizard.cpp:187
+msgid "Send pings"
+msgstr "发送 pings"
+
+#: setupwizard.cpp:188
+msgid ""
+"All hosts with TCP/IP will respond,"
+"<br>whether or not they are samba servers."
+"<br>Don't use it if your network is very large, i.e. more than 1000 hosts."
+"<br>"
+msgstr ""
+"所有使用 TCP/IP 的主机都会响应，"
+"<br>而不管他们是不是 Samba 服务器。"
+"<br>如果您的网络非常大，如超过 1000 台主机，则不要使用此选项。"
+"<br>"
+
+#: setupwizard.cpp:191
+msgid "Send NetBIOS broadcasts"
+msgstr "发送 NetBIOS 广播"
+
+#: setupwizard.cpp:192
+msgid ""
+"You need to have the samba package (nmblookup) installed."
+"<br>Only samba/windows servers will respond."
+"<br>This method is not very reliable."
+"<br>You should enable it if you are part of a large network."
+msgstr ""
+"您需要安装了 Samba 包(nmblookup)。"
+"<br>仅有 Samba/Windows 服务器会响应。"
+"<br>这种方式不是非常可靠。"
+"<br>如果您处于大网络中，则应该启用此选项。"
+
+#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249
+#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340
+msgid "<b>If unsure, keep it as is.</b>"
+msgstr "<b>如果不确定的话，请不要更改。</b>"
+
+#: setupwizard.cpp:210
+msgid ""
+"All IP addresses included in the specified range will be pinged."
+"<br>If you are part of a small network, e.g. with network mask 255.255.255.0"
+"<br>use your IP address/network mask."
+"<br>"
+msgstr ""
+"位于指定范围内的所有 IP 地址都会被 ping。"
+"<br>如果您位于小网络中，如子网掩码为 255.255.255.0"
+"<br>请使用您的 IP 地址/子网掩码。"
+"<br>"
+
+#: setupwizard.cpp:215
+msgid ""
+"<br>There are four ways to specify address ranges:"
+"<br>1. IP address/network mask, like <code>192.168.0.0/255.255.255.0;</code>"
+"<br>2. single IP addresses, like <code>10.0.0.23;</code>"
+"<br>3. continuous ranges, like <code>10.0.1.0-10.0.1.200;</code>"
+"<br>4. ranges for each part of the address, like <code>"
+"10-10.1-5.1-25.1-3;</code>"
+"<br>You can also enter combinations of 1 to 4, separated by \";\", like"
+"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
+"<br>"
+msgstr ""
+"<br>有四种格式可以指定地址范围："
+"<br>1. IP 地址/子网掩码，如 <code>192.168.0.0/255.255.255.0；</code>"
+"<br>2. 单个 IP 地址，如 <code>10.0.0.23；</code>"
+"<br>3. 连续范围，如 <code>10.0.1.0-10.0.1.200；</code>"
+"<br>4. 地址每一部分的范围，如 <code>10-10.1-5.1-25.1-3；</code>"
+"<br>您可以组合使用格式 1 到 4，中间用“;”分隔，如"
+"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100；</code>"
+"<br>"
+
+#: setupwizard.cpp:236
+msgid ""
+"This is a security related setting."
+"<br>It provides a simple IP address based way to specify \"trusted\" hosts."
+"<br>Only hosts which fit into the addresses given here are accepted by LISa as "
+"clients. The list of hosts published by LISa will also only contain hosts which "
+"fit into this scheme."
+"<br>Usually you enter your IP address/network mask here."
+msgstr ""
+"这是与安全有关的设置。"
+"<br>您可以在这里简单的根据 IP 地址指定“信任的”主机。"
+"<br>仅有那些符合指定地址的主机会被 LISa 接受为客户。而 LISa 公布的主机清单也仅包含符合此条件的主机。"
+"<br>通常您需要在这里输入您的 IP 地址/子网掩码。"
+
+#: setupwizard.cpp:258
+msgid ""
+"<br>Enter your IP address and network mask here, like <code>"
+"192.168.0.1/255.255.255.0</code>"
+msgstr "<br>在这里输入您的网络地址/子网掩码，如 <code>192.168.0.1/255.255.255.0</code>"
+
+#: setupwizard.cpp:261
+msgid ""
+"<br>To reduce the network load, the LISa servers in one network"
+"<br>cooperate with each other. Therefore you have to enter the broadcast"
+"<br>address here. If you are connected to more than one network, choose "
+"<br>one of the broadcast addresses."
+msgstr ""
+"<br>为了减少网络流量，一个网络中的 LISa 服务器是互相合作的。"
+"<br>因此您需要在此输入广播地址。如果您连接到了多个网络，请从"
+"<br>广播地址中选择一个。"
+
+#: setupwizard.cpp:280
+msgid ""
+"<br>Enter the interval after which LISa, if busy, will update its host list."
+msgstr "<br>输入 LISa 更新主机清单的间隔。"
+
+#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284
+msgid " sec"
+msgstr " 秒"
+
+#: setupwizard.cpp:286
+msgid ""
+"<br>Please note that the update interval will grow automatically by up to 16 "
+"times the value you enter here, if nobody accesses the LISa server. So if you "
+"enter 300 sec = 5 min here, this does not mean that LISa will ping your whole "
+"network every 5 minutes. The interval will increase up to 16 x 5 min = 80 min."
+msgstr ""
+"<br>请注意，若没有人访问 LISa 服务器，更新间隔将会自动增长，最到可达您在这里输入的值的 16 倍。所以，如果您在这里输入 300 秒 = 5 "
+"分钟，并不意味着 LISa 将会每隔 5 分钟 ping 您的整个网络。间隔将会增至最大 16 x 5 分钟 = 80 分钟。"
+
+#: setupwizard.cpp:305
+msgid ""
+"This page contains several settings you usually only"
+"<br>need if LISa doesn't find all hosts in your network."
+msgstr "此页面包含的设置，一般您只会在 LISa 找不到<br>您网络中的所有主机时才会用到。"
+
+#: setupwizard.cpp:308
+msgid "Re&port unnamed hosts"
+msgstr "报告不知名主机(&P)"
+
+#: setupwizard.cpp:309
+msgid ""
+"Should hosts for which LISa can't resolve the name be included in the host "
+"list?"
+"<br>"
+msgstr "LISa 无法解析名称的主机是否要包含在主机清单中？<br>"
+
+#: setupwizard.cpp:313
+msgid "Wait for replies after first scan"
+msgstr "第一次扫描后等待应答"
+
+#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115
+#: setupwizard.cpp:315 setupwizard.cpp:333
+msgid " ms"
+msgstr " 毫秒"
+
+#: setupwizard.cpp:316
+msgid ""
+"How long should LISa wait for answers to pings?"
+"<br>If LISa doesn't find all hosts, try to increase this value."
+"<br>"
+msgstr "LISa 应该等待 pings 应答多久？<br>如果 LISa 找不到全部主机，请试着增加此值。<br>"
+
+#: setupwizard.cpp:320
+msgid "Max. number of pings to send at once"
+msgstr "一次发送 ping 包的最大数目"
+
+#: setupwizard.cpp:323
+msgid ""
+"How many ping packets should LISa send at once?"
+"<br>If LISa doesn't find all hosts you could try to decrease this value."
+"<br>"
+msgstr "LISa 一次应该发送多少个 ping 包？<br>如果 LISa 找不到全部主机，请试着增加此值。<br>"
+
+#: setupwizard.cpp:326
+msgid "Al&ways scan twice"
+msgstr "总是扫描两次(&W)"
+
+#: setupwizard.cpp:330
+msgid "Wait for replies after second scan"
+msgstr "第二次扫描后等待应答"
+
+#: setupwizard.cpp:334
+msgid "If LISa doesn't find all hosts, enable this option."
+msgstr "<br>如果 LISa 找不到全部主机，请启用此选项。<br>"
+
+#: setupwizard.cpp:350
+msgid ""
+"<br>Your LAN browsing has been successfully set up."
+"<br>"
+"<br>Make sure that the LISa server is started during the boot process. How this "
+"is done depends on your distribution and OS. Usually you have to insert it "
+"somewhere in a boot script under <code>/etc</code>."
+"<br>Start the LISa server as root and without any command line options."
+"<br>The config file will now be saved to <code>/etc/lisarc</code>."
+"<br>To test the server, try <code>lan:/</code> in Konqueror."
+"<br>"
+"<br>If you have problems or suggestions, visit "
+"http://lisa-home.sourceforge.net."
+msgstr ""
+"<br>您的局域网浏览已经成功设置了。"
+"<br>"
+"<br>请确定启动阶段会自动运行 LISa 服务器。至于如何进行这一设置，取决于您的发行商和操作系统。通常您需要在 <code>/etc</code> "
+"下的启动脚本中添加一些命令。"
+"<br>请用 root 身份不带任何命令行选项启动 LISa 服务器。"
+"<br>配置文件现在将被保存为 <code>/etc/lisarc</code>。"
+"<br>要测试服务器，请在 Konqueror 中试用 <code>lan:/</code>。"
+"<br>"
+"<br>如果您还有问题或者建议，请参见 http://lisa-home.sourceforge.net。"
+
+#: setupwizard.cpp:437
+msgid "Congratulations!"
+msgstr "恭喜！"
+
+#: setupwizard.cpp:462
+msgid "You can use the same syntax as on the previous page.<br>"
+msgstr "您可以使用和上一页相同的语法。<br>"
+
+#: setupwizard.cpp:464
+msgid ""
+"There are three ways to specify IP addresses:"
+"<br>1. IP address/network mask, like<code> 192.168.0.0/255.255.255.0;</code>"
+"<br>2. continuous ranges, like<code> 10.0.1.0-10.0.1.200;</code>"
+"<br>3. single IP addresses, like<code> 10.0.0.23;</code>"
+"<br>You can also enter combinations of 1 to 3, separated by \";\", "
+"<br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
+"<br>"
+msgstr ""
+"<br>有三种格式可以指定地址范围："
+"<br>1. IP 地址/子网掩码，如 <code>192.168.0.0/255.255.255.0；</code>"
+"<br>2. 连续范围，如 <code> 10.0.1.0-10.0.1.200；</code>"
+"<br>3. 单个 IP 地址，如 <code>10.0.0.23；</code>"
+"<br>您还可以组合使用格式 1 到 3，中间用“;”分隔，如"
+"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100；</code>"
+"<br>"
+
+#: setupwizard.cpp:490
+msgid "Multiple Network Interfaces Found"
+msgstr "找到了多张网卡"
+
+#: setupwizard.cpp:493
+msgid "No Network Interface Found"
+msgstr "没有找到网卡"
+
+#: setupwizard.cpp:498
+msgid "Specify Search Method"
+msgstr "指定搜索方法"
+
+#: setupwizard.cpp:501
+msgid "Specify Address Range LISa Will Ping"
+msgstr "指定 LISa 将要 Ping 的地址范围"
+
+#: setupwizard.cpp:504
+msgid "\"Trusted\" Hosts"
+msgstr "“信任的”主机"
+
+#: setupwizard.cpp:507
+msgid "Your Broadcast Address"
+msgstr "您的广播地址"
+
+#: setupwizard.cpp:510
+msgid "LISa Update Interval"
+msgstr "LISa 更新间隔"
+
+#: kcmlisa.cpp:63
+msgid "Tell LISa Daemon How to Search for Hosts"
+msgstr "告诉 LISa 守护进程如何搜索主机"
+
+#: kcmlisa.cpp:66
+msgid "Send &NetBIOS broadcasts using nmblookup"
+msgstr "使用 nmblookup 发送 &NetBIOS 广播"
+
+#: kcmlisa.cpp:67 kcmreslisa.cpp:63
+msgid "Only hosts running SMB servers will answer"
+msgstr "只有运行 SMB 服务器的主机会应答"
+
+#: kcmlisa.cpp:69
+msgid "Send &pings (ICMP echo packets)"
+msgstr "发送 &Ping 包(ICMP 响应包)"
+
+#: kcmlisa.cpp:70
+msgid "All hosts running TCP/IP will answer"
+msgstr "所有运行 TCP/IP 的主机都会应答"
+
+#: kcmlisa.cpp:77
+msgid "To these &IP addresses:"
+msgstr "到这些 &IP 地址："
+
+#: kcmlisa.cpp:78
+msgid ""
+"Enter all ranges to scan, using the format "
+"'192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0'"
+msgstr "输入要扫描的全部范围，格式为“192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0”"
+
+#: kcmlisa.cpp:88
+msgid "&Broadcast network address:"
+msgstr "广播网络地址(&B)："
+
+#: kcmlisa.cpp:89
+msgid "Your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)"
+msgstr "您的网络地址/子网掩码(例如，192.168.0.0/255.255.255.0;)"
+
+#: kcmlisa.cpp:96
+msgid "&Trusted IP addresses:"
+msgstr "信任的 IP 地址(&T)："
+
+#: kcmlisa.cpp:97 kcmreslisa.cpp:71
+msgid ""
+"Usually your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)"
+msgstr "通常是您使用的网络地址/子网掩码(例如，192.168.0.0/255.255.255.0;)"
+
+#: kcmlisa.cpp:110
+msgid "Setup Wizard..."
+msgstr "设置向导..."
+
+#: kcmlisa.cpp:113 kcmreslisa.cpp:80
+msgid "&Suggest Settings"
+msgstr "推荐设置(&S)"
+
+#: kcmlisa.cpp:117
+msgid "Ad&vanced Settings..."
+msgstr "高级设置(&V)..."
+
+#: kcmlisa.cpp:119
+msgid "Advanced Settings for LISa"
+msgstr "LISa 高级设置"
+
+#: kcmlisa.cpp:124
+msgid "&Additionally Check These Hosts"
+msgstr "另外也检查这些主机(&A)"
+
+#: kcmlisa.cpp:126
+msgid "The hosts listed here will be pinged"
+msgstr "在此列出的主机将会被 Ping"
+
+#: kcmlisa.cpp:130 kcmreslisa.cpp:92
+msgid "Show &hosts without DNS names"
+msgstr "显示没有 DNS 名字的主机(&H)"
+
+#: kcmlisa.cpp:135 kcmreslisa.cpp:97
+msgid "Host list update interval:"
+msgstr "主机清单更新间隔："
+
+#: kcmlisa.cpp:136 kcmlisa.cpp:139 kcmreslisa.cpp:98 kcmreslisa.cpp:101
+msgid "Search hosts after this number of seconds"
+msgstr "经过多少秒后搜索主机"
+
+#: kcmlisa.cpp:141 kcmreslisa.cpp:103
+msgid "Always check twice for hosts when searching"
+msgstr "搜索时总是检查两次"
+
+#: kcmlisa.cpp:144 kcmreslisa.cpp:106
+msgid "Wait for replies from hosts after first scan:"
+msgstr "第一次扫描后等待主机应答："
+
+#: kcmlisa.cpp:145 kcmlisa.cpp:148 kcmlisa.cpp:151 kcmlisa.cpp:154
+#: kcmreslisa.cpp:107 kcmreslisa.cpp:110 kcmreslisa.cpp:113 kcmreslisa.cpp:116
+msgid "How long to wait for replies to the ICMP echo requests from hosts"
+msgstr "等待主机应答 ICMP 响应请求的时间"
+
+#: kcmlisa.cpp:150 kcmreslisa.cpp:112
+msgid "Wait for replies from hosts after second scan:"
+msgstr "第二次扫描后等待应答："
+
+#: kcmlisa.cpp:156 kcmreslisa.cpp:118
+msgid "Max. number of ping packets to send at once:"
+msgstr "一次发送 ping 包的最大数目："
+
+#: kcmlisa.cpp:301
+msgid "Saving the results to %1 failed."
+msgstr "无法将结果保存为 %1。"
+
+#: kcmlisa.cpp:310
+msgid "No network interface cards found."
+msgstr "没有找到网卡。"
+
+#: kcmlisa.cpp:332 kcmreslisa.cpp:232
+msgid ""
+"You have more than one network interface installed."
+"<br>Please make sure the suggested settings are correct."
+"<br>"
+"<br>The following interfaces were found:"
+"<br>"
+"<br>"
+msgstr "您安装了多个网卡。<br>请确定推荐设置是正确的。<br><br>发现以下网卡：<br><br>"
+
+#: kcmlisa.cpp:381
+msgid ""
+"The configuration has been saved to /etc/lisarc.\n"
+"Make sure that the LISa daemon is started,\n"
+" e.g. using an init script when booting.\n"
+"You can find examples and documentation at http://lisa-home.sourceforge.net ."
+msgstr ""
+"配置已经保存为 /etc/lisarc。\n"
+"请确定 LISa 守护程序已启动，\n"
+"即系统启动时已通过初始化脚本启动。\n"
+"您可以在 http://lisa-home.sourceforge.net 上找到示例和文档。"
+
+#: kcmreslisa.cpp:59
+msgid "Tell ResLISa Daemon How to Search for Hosts"
+msgstr "告诉 ResLISa 守护进程如何搜索主机"
+
+#: kcmreslisa.cpp:62
+msgid "Send &NetBIOS broadcasts using &nmblookup"
+msgstr "使用 nmblookup 发送 NetBIOS 广播(&N)"
+
+#: kcmreslisa.cpp:65
+msgid "A&dditionally Check These Hosts"
+msgstr "另外也检查这些主机(&D)"
+
+#: kcmreslisa.cpp:66
+msgid "The hosts listed here will be pinged."
+msgstr "在此列出的主机将会被 Ping。"
+
+#: kcmreslisa.cpp:70
+msgid "&Trusted addresses:"
+msgstr "信任的地址(&T)："
+
+#: kcmreslisa.cpp:77
+msgid "Use &rlan:/ instead of lan:/ in Konqueror's navigation panel"
+msgstr "在 Konqueror 的导航面板中使用 &rlan:/ 而不是 lan:/"
+
+#: kcmreslisa.cpp:84
+msgid "Ad&vanced Settings"
+msgstr "高级设置(&V)"
+
+#: kcmreslisa.cpp:87
+msgid "Advanced Settings for ResLISa"
+msgstr "ResLISa 高级设置"
+
+#: kcmreslisa.cpp:214
+msgid ""
+"It appears you do not have any network interfaces installed on your system."
+msgstr "您的系统上好像没有安装网卡。"
+
+#: kcmreslisa.cpp:242
+msgid ""
+"The ResLISa daemon is now configured correctly, hopefully."
+"<br>Make sure that the reslisa binary is installed <i>suid root</i>."
+msgstr "现在应该已经正确配置了 ResLISa 守护进程。<br>请确定已经以 <i>suid root</i> 身份安装了 reslisa 程序。"
+
+#: kcmkiolan.cpp:41
+msgid "Show Links for Following Services"
+msgstr "显示下列服务的链接"
+
+#: kcmkiolan.cpp:43
+msgid "FTP (TCP, port 21): "
+msgstr "FTP (TCP 端口 21)："
+
+#: kcmkiolan.cpp:44
+msgid "HTTP (TCP, port 80): "
+msgstr "HTTP (TCP 端口 80)"
+
+#: kcmkiolan.cpp:45
+msgid "NFS (TCP, port 2049): "
+msgstr "NFS (TCP 端口 2049)："
+
+#: kcmkiolan.cpp:46
+msgid "Windows shares (TCP, ports 445 and 139):"
+msgstr "Windows 共享(TCP 端口 445 和 139)："
+
+#: kcmkiolan.cpp:47
+msgid "Secure Shell/Fish (TCP, port 22): "
+msgstr "安全 Shell/Fish(TCP 端口 22)："
+
+#: kcmkiolan.cpp:48
+msgid "Show &short hostnames (without domain suffix)"
+msgstr "显示短主机名(不显示域名后缀)(&S)"
+
+#: kcmkiolan.cpp:51
+msgid "Default LISa server host: "
+msgstr "默认 LISa 服务器主机："
+
+#: portsettingsbar.cpp:33
+msgid "Check Availability"
+msgstr "检查可用性"
+
+#: portsettingsbar.cpp:34
+msgid "Always"
+msgstr "总是"
+
+#: portsettingsbar.cpp:35
+msgid "Never"
+msgstr "从不"
+
+#: findnic.cpp:107 findnic.cpp:174
+msgid "Up"
+msgstr "连"
+
+#: findnic.cpp:109 findnic.cpp:176
+msgid "Down"
+msgstr "断"
+
+#: findnic.cpp:112 findnic.cpp:280
+msgid "Broadcast"
+msgstr "广播"
+
+#: findnic.cpp:114 findnic.cpp:273
+msgid "Point to Point"
+msgstr "点对点"
+
+#: findnic.cpp:117 findnic.cpp:287
+msgid "Multicast"
+msgstr "多播"
+
+#: findnic.cpp:120 findnic.cpp:294
+msgid "Loopback"
+msgstr "回环"
+
+#: findnic.cpp:122 findnic.cpp:134
+msgid "Unknown"
+msgstr "未知"
+
+#~ msgid "&Guided LISa Setup..."
+#~ msgstr "LISa 设置向导(&G)..."
+
+#~ msgid "Show FISH (ssh) Service Links (TCP, port 22)"
+#~ msgstr "显示 FISH(ssh) 服务链接(TCP 端口 22)"