Initial import of extracted KDE i18n tarballs

12 files changed, 8377 insertions, 0 deletions

diff --git a/tde-i18n-zh_TW/messages/kdeadmin/Makefile.am b/tde-i18n-zh_TW/messages/kdeadmin/Makefile.am
new file mode 100644
index 00000000000..c37fe4d9a66
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/Makefile.am
@@ -0,0 +1,3 @@
+KDE_LANG = zh_TW
+SUBDIRS = $(AUTODIRS)
+POFILES = AUTO
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/Makefile.in b/tde-i18n-zh_TW/messages/kdeadmin/Makefile.in
new file mode 100644
index 00000000000..e92c4ef891c
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/Makefile.in
@@ -0,0 +1,671 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# KDE tags expanded automatically by am_edit - $Revision: 483858 $ 
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = messages/kdeadmin
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+#>- 	html-recursive info-recursive install-data-recursive \
+#>- 	install-dvi-recursive install-exec-recursive \
+#>- 	install-html-recursive install-info-recursive \
+#>- 	install-pdf-recursive install-ps-recursive install-recursive \
+#>- 	installcheck-recursive installdirs-recursive pdf-recursive \
+#>- 	ps-recursive uninstall-recursive
+#>+ 7
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+#>+ 1
+#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
+#>+ 1
+DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+ARTSCCONFIG = @ARTSCCONFIG@
+AUTOCONF = @AUTOCONF@
+AUTODIRS = @AUTODIRS@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CONF_FILES = @CONF_FILES@
+CYGPATH_W = @CYGPATH_W@
+DCOPIDL = @DCOPIDL@
+DCOPIDL2CPP = @DCOPIDL2CPP@
+DCOPIDLNG = @DCOPIDLNG@
+DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+GMSGFMT = @GMSGFMT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
+KCONFIG_COMPILER = @KCONFIG_COMPILER@
+KDECONFIG = @KDECONFIG@
+KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
+KDE_RPATH = @KDE_RPATH@
+KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
+MCOPIDL = @MCOPIDL@
+MEINPROC = @MEINPROC@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TOPSUBDIRS = @TOPSUBDIRS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XMLLINT = @XMLLINT@
+X_RPATH = @X_RPATH@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+#>- bindir = @bindir@
+#>+ 2
+DEPDIR = .deps
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+kde_appsdir = @kde_appsdir@
+kde_bindir = @kde_bindir@
+kde_confdir = @kde_confdir@
+kde_datadir = @kde_datadir@
+kde_htmldir = @kde_htmldir@
+kde_icondir = @kde_icondir@
+kde_kcfgdir = @kde_kcfgdir@
+kde_libs_htmldir = @kde_libs_htmldir@
+kde_libs_prefix = @kde_libs_prefix@
+kde_locale = @kde_locale@
+kde_mimedir = @kde_mimedir@
+kde_moduledir = @kde_moduledir@
+kde_servicesdir = @kde_servicesdir@
+kde_servicetypesdir = @kde_servicetypesdir@
+kde_sounddir = @kde_sounddir@
+kde_styledir = @kde_styledir@
+kde_templatesdir = @kde_templatesdir@
+kde_wallpaperdir = @kde_wallpaperdir@
+kde_widgetdir = @kde_widgetdir@
+kdeinitdir = @kdeinitdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xdg_appsdir = @xdg_appsdir@
+xdg_directorydir = @xdg_directorydir@
+xdg_menudir = @xdg_menudir@
+KDE_LANG = zh_TW
+#>- SUBDIRS = $(AUTODIRS)
+#>+ 1
+SUBDIRS =.
+#>- POFILES = AUTO
+#>+ 2
+POFILES = kfile_rpm.po kcron.po kfile_deb.po secpolicy.po knetworkconf.po ksysv.po kpackage.po kcmlilo.po kuser.po kdat.po
+GMOFILES = kfile_rpm.gmo kcron.gmo kfile_deb.gmo secpolicy.gmo knetworkconf.gmo ksysv.gmo kpackage.gmo kcmlilo.gmo kuser.gmo kdat.gmo
+#>- all: all-recursive
+#>+ 1
+all: all-nls docs-am  all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+#>- 	@for dep in $?; do \
+#>- 	  case '$(am__configure_deps)' in \
+#>- 	    *$$dep*) \
+#>- 	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+#>- 		&& exit 0; \
+#>- 	      exit 1;; \
+#>- 	  esac; \
+#>- 	done; \
+#>- 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  messages/kdeadmin/Makefile'; \
+#>- 	cd $(top_srcdir) && \
+#>- 	  $(AUTOMAKE) --gnu  messages/kdeadmin/Makefile
+#>+ 12
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  messages/kdeadmin/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  messages/kdeadmin/Makefile
+	cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin messages/kdeadmin/Makefile.in
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+#>- distdir: $(DISTFILES)
+#>+ 1
+distdir: distdir-nls  $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+#>- uninstall: uninstall-recursive
+#>+ 1
+uninstall: uninstall-nls  uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+#>- clean: clean-recursive
+#>+ 1
+clean: kde-rpo-clean  clean-recursive
+
+#>- clean-am: clean-generic mostlyclean-am
+#>+ 1
+clean-am: clean-bcheck  clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+#>- install-data-am:
+#>+ 1
+install-data-am: install-nls 
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+#>- maintainer-clean: maintainer-clean-recursive
+#>+ 1
+maintainer-clean: clean-nls  maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic ctags \
+	ctags-recursive distclean distclean-generic distclean-tags \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+	tags-recursive uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+
+#>+ 2
+KDE_DIST=secpolicy.po kdat.po kpackage.po kuser.po kfile_deb.po ksysv.po kcron.po Makefile.in kfile_rpm.po knetworkconf.po kcmlilo.po Makefile.am 
+
+#>+ 31
+kfile_rpm.gmo: kfile_rpm.po
+	rm -f kfile_rpm.gmo; $(GMSGFMT) -o kfile_rpm.gmo $(srcdir)/kfile_rpm.po
+	test ! -f kfile_rpm.gmo || touch kfile_rpm.gmo
+kcron.gmo: kcron.po
+	rm -f kcron.gmo; $(GMSGFMT) -o kcron.gmo $(srcdir)/kcron.po
+	test ! -f kcron.gmo || touch kcron.gmo
+kfile_deb.gmo: kfile_deb.po
+	rm -f kfile_deb.gmo; $(GMSGFMT) -o kfile_deb.gmo $(srcdir)/kfile_deb.po
+	test ! -f kfile_deb.gmo || touch kfile_deb.gmo
+secpolicy.gmo: secpolicy.po
+	rm -f secpolicy.gmo; $(GMSGFMT) -o secpolicy.gmo $(srcdir)/secpolicy.po
+	test ! -f secpolicy.gmo || touch secpolicy.gmo
+knetworkconf.gmo: knetworkconf.po
+	rm -f knetworkconf.gmo; $(GMSGFMT) -o knetworkconf.gmo $(srcdir)/knetworkconf.po
+	test ! -f knetworkconf.gmo || touch knetworkconf.gmo
+ksysv.gmo: ksysv.po
+	rm -f ksysv.gmo; $(GMSGFMT) -o ksysv.gmo $(srcdir)/ksysv.po
+	test ! -f ksysv.gmo || touch ksysv.gmo
+kpackage.gmo: kpackage.po
+	rm -f kpackage.gmo; $(GMSGFMT) -o kpackage.gmo $(srcdir)/kpackage.po
+	test ! -f kpackage.gmo || touch kpackage.gmo
+kcmlilo.gmo: kcmlilo.po
+	rm -f kcmlilo.gmo; $(GMSGFMT) -o kcmlilo.gmo $(srcdir)/kcmlilo.po
+	test ! -f kcmlilo.gmo || touch kcmlilo.gmo
+kuser.gmo: kuser.po
+	rm -f kuser.gmo; $(GMSGFMT) -o kuser.gmo $(srcdir)/kuser.po
+	test ! -f kuser.gmo || touch kuser.gmo
+kdat.gmo: kdat.po
+	rm -f kdat.gmo; $(GMSGFMT) -o kdat.gmo $(srcdir)/kdat.po
+	test ! -f kdat.gmo || touch kdat.gmo
+
+#>+ 3
+clean-nls:
+	-rm -f  kfile_rpm.gmo kcron.gmo kfile_deb.gmo secpolicy.gmo knetworkconf.gmo ksysv.gmo kpackage.gmo kcmlilo.gmo kuser.gmo kdat.gmo
+
+#>+ 10
+install-nls:
+	$(mkinstalldirs) $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES
+	@for base in kfile_rpm kcron kfile_deb secpolicy knetworkconf ksysv kpackage kcmlilo kuser kdat ; do \
+	  echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
+	  if test -f $$base.gmo; then $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
+	  elif test -f $(srcdir)/$$base.gmo; then $(INSTALL_DATA) $(srcdir)/$$base.gmo $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/$$base.mo ;\
+	  fi ;\
+	done
+
+
+#>+ 12
+uninstall-nls:
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kfile_rpm.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcron.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kfile_deb.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/secpolicy.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/knetworkconf.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/ksysv.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kpackage.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kcmlilo.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kuser.mo
+	rm -f $(DESTDIR)$(kde_locale)/$(KDE_LANG)/LC_MESSAGES/kdat.mo
+
+#>+ 2
+all-nls: $(GMOFILES)
+
+#>+ 8
+distdir-nls:$(GMOFILES)
+	for file in $(POFILES); do \
+	  cp $(srcdir)/$$file $(distdir); \
+	done
+	for file in $(GMOFILES); do \
+	  cp $(srcdir)/$$file $(distdir); \
+	done
+
+#>+ 2
+docs-am:
+
+#>+ 15
+force-reedit:
+		@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  messages/kdeadmin/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  messages/kdeadmin/Makefile
+	cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin messages/kdeadmin/Makefile.in
+
+
+#>+ 21
+clean-bcheck: 
+	rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
+
+bcheck: bcheck-recursive
+
+bcheck-am:
+	@for i in ; do \
+	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
+	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
+	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
+	        echo "$$i"; \
+	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy -c $$i.bchecktest.cc; then \
+	            rm -f $$i.bchecktest.cc; exit 1; \
+	        fi ; \
+	        echo "" >> $$i.bchecktest.cc.class; \
+	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
+	        rm -f a.out; \
+	    fi ; \
+	done
+
+
+#>+ 3
+final:
+	$(MAKE) all-am
+
+#>+ 3
+final-install:
+	$(MAKE) install-am
+
+#>+ 3
+no-final:
+	$(MAKE) all-am
+
+#>+ 3
+no-final-install:
+	$(MAKE) install-am
+
+#>+ 3
+kde-rpo-clean:
+	-rm -f *.rpo
+
+#>+ 3
+nmcheck: 
+nmcheck-am: nmcheck
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kcmlilo.po b/tde-i18n-zh_TW/messages/kdeadmin/kcmlilo.po
new file mode 100644
index 00000000000..d0494544509
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kcmlilo.po
@@ -0,0 +1,613 @@
+# traditional Chinese Translation of kcmlilo
+# Copyright (C) 2001-2002 Free Software Foundation, Inc.
+# Translator: Jing-Jong Shyue <shyue@sonoma.com.tw>, 2001.
+#             Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmlilo\n"
+"POT-Creation-Date: 2007-03-13 02:18+0100\n"
+"PO-Revision-Date: 2005-12-08 10:11+0800\n"
+"Last-Translator: Chao-Hsiung Liao <pesder.liao@msa.hinet.net>\n"
+"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8-bit\n"
+
+#: kde-qt-common/EditWidget.cpp:43
+msgid "Select..."
+msgstr "選擇..."
+
+#: kde-qt-common/expert.cpp:41
+msgid ""
+"You can edit the lilo.conf file directly here. All changes you make here are "
+"automatically transferred to the graphical interface."
+msgstr "您可以在這邊直接編輯 lilo.conf。所有的變更會自動傳遞到圖形介面中。"
+
+#: kde-qt-common/general.cpp:45
+msgid "Install &boot record to drive/partition:"
+msgstr "安裝開機紀錄到磁碟/分割區(&B):"
+
+#: kde-qt-common/general.cpp:55
+msgid ""
+"Select the drive or partition you want to install the LILO boot loader to here. "
+"Unless you intend to use other boot managers in addition to LILO, this should "
+"be the MBR (master boot record) of your boot drive."
+"<br>In this case, you should probably select <i>/dev/hda</i> "
+"if your boot drive is an IDE drive or <i>/dev/sda</i> "
+"if your boot drive is SCSI."
+msgstr ""
+"在此選擇您想要安裝 LILO 啟動載入器的磁碟或分割區。除非您預備使用 LILO 以外的啟動管理器，它應該被安裝在您的開機磁碟的 MBR (主要啟動紀錄) "
+"中。"
+"<br>在這種狀況下，如果您使用 IDE 磁碟，您應該會使用 <i>/dev/hda</i>；如果您使用 SCSI 磁碟，使用 <i>/dev/sda</i>"
+"。"
+
+#: kde-qt-common/general.cpp:58
+msgid "Boot the default kernel/OS &after:"
+msgstr "在...後啟動預設核心/作業系統(&A):"
+
+#: kde-qt-common/general.cpp:60
+msgid "/10 seconds"
+msgstr "/10 秒"
+
+#: kde-qt-common/general.cpp:64
+msgid ""
+"LILO will wait the amount of time specified here before booting the kernel (or "
+"OS) marked as <i>default</i> in the <b>Images</b> tab."
+msgstr "LILO 將會等待在這邊指定的時間之後，自動啟動在<b>映像</b>分頁中標記為<i>預設</i>的核心（或作業系統）。"
+
+#: kde-qt-common/general.cpp:67
+msgid "Use &linear mode"
+msgstr "使用線性模式(&L)"
+
+#: kde-qt-common/general.cpp:69
+msgid ""
+"Check this box if you want to use the linear mode."
+"<br>Linear mode tells the boot loader the location of kernels in linear "
+"addressing rather than sector/head/cylinder."
+"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
+"you're planning to create a boot disk to be used with a different computer."
+"<br>See the lilo.conf man page for details."
+msgstr ""
+"如果您要使用線性模式，核取此方塊。"
+"<br>線性模式會使啟動載入器以線性位置載入核心而不用 CHS 方式。"
+"<br>對有些 SCSI 磁碟而言，線性模式是必須的。除非您要建立在別台電腦上使用的開機磁碟，這也不會造成傷害。"
+"<br>詳細資料請參照 lilo.conf 手冊頁。"
+
+#: kde-qt-common/general.cpp:70
+msgid "Use &compact mode"
+msgstr "使用緊密模式(&C)"
+
+#: kde-qt-common/general.cpp:72
+msgid ""
+"Check this box if you want to use the compact mode."
+"<br>The compact mode tries to merge read requests for adjacent sectors into a "
+"single read request. This reduces load time and keeps the boot map smaller, but "
+"will not work on all systems."
+msgstr ""
+"如果您要使用緊密模式，核取此方塊。"
+"<br>緊密模式嘗試將多個磁區的讀取合併成一次讀取。這可以減少載入的時間並保持較小的啟動對應檔，但不是所有系統都能使用。"
+
+#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
+msgid "&Record boot command lines for defaults"
+msgstr "預設紀錄開機指令行(&R)"
+
+#: kde-qt-common/general.cpp:78
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
+"is manually overridden.\n"
+"This sets the <b>lock</b> option in lilo.conf."
+msgstr ""
+"核取這個方塊以自動紀錄開機命令成為往後開機的預設值。這種方式會讓 LILO “鎖定”這個選擇直到手動變更。\n"
+"這會設定 lilo.conf 中的 <b>lock</b> 選項。"
+
+#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
+msgid "R&estrict parameters"
+msgstr "限制參數(&E)"
+
+#: kde-qt-common/general.cpp:82
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"如果核取這個方塊，要變更任何參數時，在下面輸入的密碼是必須的。也就是使用者可以啟動 <i>linux</i> 但不能使用 <i>linux single</i> "
+"或 <i>linux init=/bin/sh</i>。\n"
+"這會設定 lilo.conf 中的 <b>restricted</b> 選項。這個會影響所有的核心。如果您希望在每個核心有不同的設定，請到 <i>"
+"作業系統</i> 分頁並選擇 <i>詳細資料</i>。"
+
+#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
+msgid "Require &password:"
+msgstr "需要密碼(&P):"
+
+#: kde-qt-common/general.cpp:93
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"在這邊輸入開機時需要的密碼。如果使用了上面的 <i>限制參數</i> 功能，必須要使用這個密碼才能變更參數。"
+"<br><b>警告：</b> 這個密碼是以未編碼的方式存在 /etc/lilo.conf "
+"中。您必須確定未授權的人不能讀取這個檔案。同時，建議不要使用您的一般/管理者密碼。"
+"<br>這個會影響所有的核心，如果您希望在每個核心有不同的設定，請到 <i>作業系統</i> 分頁並使用 <i>詳細資料</i>。"
+
+#: kde-qt-common/general.cpp:97
+msgid "&Default graphics mode on text console:"
+msgstr "在文字終端機上的預設圖形模式(&D):"
+
+#: kde-qt-common/general.cpp:100
+msgid ""
+"You can select the default graphics mode here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+"<br>This sets a default for all Linux kernels you want to boot. If you need a "
+"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
+"Details</i>."
+msgstr ""
+"您可以在這邊選擇預設的圖形模式。"
+"<br>如果您希望使用 VGA 圖形模式，您必須在編譯核心時加入 framebuffer 的支援。選擇 <i>詢問</i> 將會在開機時詢問您。"
+"<p>這個會影響所有的核心，如果您希望在每個核心有不同的設定，請到 <i>作業系統</i> 分頁並使用 <i>詳細資料</i>。"
+
+#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
+msgid "default"
+msgstr "預設"
+
+#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
+msgid "ask"
+msgstr "詢問"
+
+#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
+msgid "text 80x25 (0)"
+msgstr "文字 80x25 (0)"
+
+#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
+msgid "text 80x50 (1)"
+msgstr "文字 80x50 (1)"
+
+#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
+msgid "text 80x43 (2)"
+msgstr "文字 80x43 (2)"
+
+#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
+msgid "text 80x28 (3)"
+msgstr "文字 80x28 (3)"
+
+#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
+msgid "text 80x30 (4)"
+msgstr "文字 80x30 (4)"
+
+#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
+msgid "text 80x34 (5)"
+msgstr "文字 80x34 (5)"
+
+#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
+msgid "text 80x60 (6)"
+msgstr "文字 80x60 (6)"
+
+#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
+msgid "text 40x25 (7)"
+msgstr "文字 40x25 (7)"
+
+#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
+msgid "VGA 640x480, 256 colors (769)"
+msgstr "VGA 640x480, 256 色 (769)"
+
+#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
+msgid "VGA 640x480, 32767 colors (784)"
+msgstr "VGA 640x480, 32767 色 (784)"
+
+#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
+msgid "VGA 640x480, 65536 colors (785)"
+msgstr "VGA 640x480, 65536 色 (785)"
+
+#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
+msgid "VGA 640x480, 16.7M colors (786)"
+msgstr "VGA 640x480, 16.7M 色 (786)"
+
+#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
+msgid "VGA 800x600, 256 colors (771)"
+msgstr "VGA 800x600, 256 色 (771)"
+
+#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
+msgid "VGA 800x600, 32767 colors (787)"
+msgstr "VGA 800x600, 32767 色 (787)"
+
+#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
+msgid "VGA 800x600, 65536 colors (788)"
+msgstr "VGA 800x600, 65536 色 (788)"
+
+#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
+msgid "VGA 800x600, 16.7M colors (789)"
+msgstr "VGA 800x600, 16.7M 色 (789)"
+
+#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
+msgid "VGA 1024x768, 256 colors (773)"
+msgstr "VGA 1024x768, 256 色 (773)"
+
+#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
+msgid "VGA 1024x768, 32767 colors (790)"
+msgstr "VGA 1024x768, 32767 色 (790)"
+
+#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
+msgid "VGA 1024x768, 65536 colors (791)"
+msgstr "VGA 1024x768, 65536 色 (791)"
+
+#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
+msgid "VGA 1024x768, 16.7M colors (792)"
+msgstr "VGA 1024x768, 16.7M 色 (792)"
+
+#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
+msgid "VGA 1280x1024, 256 colors (775)"
+msgstr "VGA 1280x1024, 256 色 (775)"
+
+#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
+msgid "VGA 1280x1024, 32767 colors (793)"
+msgstr "VGA 1280x1024, 32767 色 (793)"
+
+#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
+msgid "VGA 1280x1024, 65536 colors (794)"
+msgstr "VGA 1280x1024, 65536 色 (794)"
+
+#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
+msgid "VGA 1280x1024, 16.7M colors (795)"
+msgstr "VGA 1280x1024, 16.7M 色 (795)"
+
+#: kde-qt-common/general.cpp:130
+msgid "Enter LILO &prompt automatically"
+msgstr "自動進入 LILO 提示(&P)"
+
+#: kde-qt-common/general.cpp:131
+msgid ""
+"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
+"pressed. If it is turned off, LILO boots the default operating system unless "
+"shift is pressed (in that case, it goes to the LILO prompt)."
+"<br>This sets the <i>prompt</i> option in lilo.conf."
+msgstr ""
+"如果核取這個方塊，不論是否有按下按鍵都會出現 LILO 提示。如果關閉， LILO 將會啟動預設的作業系統，除非您按下“shift”（這樣就會進入 LILO "
+"提示）。"
+"<br>這個會設定 lilo.conf 中的 <i>prompt</i> 選項。"
+
+#: kde-qt-common/images.cpp:53
+msgid ""
+"This is the list of kernels and operating systems you can currently boot. "
+"Select which one you want to edit here."
+msgstr "這是目前您可以啟動的核心與作業系統清單。請選擇您所要編輯的作業系統。"
+
+#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
+msgid "&Kernel:"
+msgstr "核心(&K):"
+
+#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
+msgid "Enter the filename of the kernel you want to boot here."
+msgstr "請在這邊輸入您要開機的核心檔案名稱。"
+
+#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
+#: kde-qt-common/images.cpp:216
+msgid "&Label:"
+msgstr "標籤(&L):"
+
+#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
+msgid "Enter the label (name) of the kernel you want to boot here."
+msgstr "請在這邊輸入您要開機的核心的標籤（名稱）。"
+
+#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
+msgid "&Root filesystem:"
+msgstr "根檔案系統(&R):"
+
+#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
+msgid ""
+"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
+"time) for the kernel you want to boot here."
+msgstr "請在這邊輸入您核心所需的根檔案系統（在開機時被掛載於 / 的分割區）。"
+
+#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
+msgid "&Initial ramdisk:"
+msgstr "初始化記憶體磁碟(&I):"
+
+#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
+msgid ""
+"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
+"filename here. Leave this field blank if you don't intend to use an initial "
+"ramdisk for this kernel."
+msgstr "如果您希望在這個核心上使用初始化記憶體磁碟(initrd)，請在這邊輸入檔案名稱。否則請留下空白。"
+
+#: kde-qt-common/images.cpp:71
+msgid "E&xtra parameters:"
+msgstr "額外參數(&X):"
+
+#: kde-qt-common/images.cpp:72
+msgid ""
+"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
+"can be left blank."
+"<br>This sets the <i>append</i> option in lilo.conf."
+msgstr "在這邊輸入任何您希望傳遞給核心的額外參數。通常您可以保留空白。<br>這會設定 lilo.conf 中的<i>append</i>選項。"
+
+#: kde-qt-common/images.cpp:79
+msgid "Set &Default"
+msgstr "設為預設值(&D)"
+
+#: kde-qt-common/images.cpp:80
+msgid "Boot this kernel/OS if the user doesn't make a different choice"
+msgstr "如果使用者沒有另外指定，啟動這個核心/作業系統。"
+
+#: kde-qt-common/images.cpp:82
+msgid "De&tails"
+msgstr "詳細資料(&T)"
+
+#: kde-qt-common/images.cpp:83
+msgid ""
+"This button brings up a dialog box with further, less commonly used, options."
+msgstr "這個按鈕開啟一些進階但較少使用的參數對話窗。"
+
+#: kde-qt-common/images.cpp:85
+msgid "&Probe"
+msgstr "偵測(&P)"
+
+#: kde-qt-common/images.cpp:87
+msgid ""
+"Automatically generate a (hopefully) reasonable lilo.conf for your system"
+msgstr "自動產生一個適當的（希望如此） lilo.conf 給您的系統"
+
+#: kde-qt-common/images.cpp:88
+msgid "&Check Configuration"
+msgstr "檢查組態設定(&C):"
+
+#: kde-qt-common/images.cpp:90
+msgid "Run LILO in test mode to see if the configuration is ok"
+msgstr "以測試模式執行 LILO 以確定組態檔是正確的"
+
+#: kde-qt-common/images.cpp:91
+msgid "Add &Kernel..."
+msgstr "增加核心(&K)..."
+
+#: kde-qt-common/images.cpp:93
+msgid "Add a new Linux kernel to the boot menu"
+msgstr "增加新的 Linux 核心到開機選單"
+
+#: kde-qt-common/images.cpp:94
+msgid "Add Other &OS..."
+msgstr "增加其他作業系統(&O)..."
+
+#: kde-qt-common/images.cpp:96
+msgid "Add a non-Linux OS to the boot menu"
+msgstr "增加一個非 Linux 作業系統到開機選單"
+
+#: kde-qt-common/images.cpp:97
+msgid "&Remove Entry"
+msgstr "移除項目(&R)"
+
+#: kde-qt-common/images.cpp:99
+msgid "Remove entry from the boot menu"
+msgstr "從開機選單移除項目"
+
+#: kde-qt-common/images.cpp:177
+msgid ""
+"Configuration ok. LILO said:\n"
+msgstr ""
+"組態正確。 LILO 說：\n"
+
+#: kde-qt-common/images.cpp:178
+msgid "Configuration OK"
+msgstr "組態設定正確"
+
+#: kde-qt-common/images.cpp:180
+msgid ""
+"Configuration NOT ok. LILO said:\n"
+msgstr ""
+"組態不正確。 LILO 說：\n"
+
+#: kde-qt-common/images.cpp:181
+msgid "Configuration NOT ok"
+msgstr "組態設定不正確"
+
+#: kde-qt-common/images.cpp:187
+msgid "&Kernel filename:"
+msgstr "核心檔案名稱(&K):"
+
+#: kde-qt-common/images.cpp:215
+msgid "Boot from dis&k:"
+msgstr "從磁碟開機(&K):"
+
+#: kde-qt-common/images.cpp:215
+msgid ""
+"Enter the partition containing the operating system you'd like to boot here."
+msgstr "在這邊輸入包含您希望啟動之作業系統的分割區。"
+
+#: kde-qt-common/images.cpp:216
+msgid "Enter the label (name) of the operating system here."
+msgstr "在這邊輸入作業系統的標籤（名稱）。"
+
+#: kde-qt-common/images.cpp:297
+msgid "Dis&k:"
+msgstr "磁碟(&K):"
+
+#: kde-qt-common/mainwidget.cpp:43
+msgid "&General Options"
+msgstr "一般選項(&G)"
+
+#: kde-qt-common/mainwidget.cpp:44
+msgid "&Operating Systems"
+msgstr "作業系統(&O)"
+
+#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
+#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
+msgid "&Expert"
+msgstr "專家模式(&E)"
+
+#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
+msgid "&General options"
+msgstr "一般選項(&G)"
+
+#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
+msgid "&Operating systems"
+msgstr "作業系統(&O)"
+
+#: kde/Details.cpp:44 qt/Details.cpp:44
+msgid "&Graphics mode on text console:"
+msgstr "在文字終端機上使用圖形模式(&G):"
+
+#: kde/Details.cpp:47 qt/Details.cpp:47
+msgid ""
+"You can select the graphics mode for this kernel here."
+"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
+"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
+"boot time."
+msgstr ""
+"您可以在這邊選擇核心所使用的圖形模式。"
+"<br>如果您要使用 VGA 圖形模式，您必須在編譯核心時加入 framebuffer 的支援。選擇 <i>詢問</i> 將會在開機時詢問您。"
+
+#: kde/Details.cpp:75 qt/Details.cpp:76
+msgid "Mount root filesystem &read-only"
+msgstr "以唯讀方式掛載根檔案系統(&R)"
+
+#: kde/Details.cpp:76 qt/Details.cpp:77
+msgid ""
+"Mount the root filesystem for this kernel read-only. Since the init scripts "
+"normally take care of remounting the root filesystem in read-write mode after "
+"running some checks, this should always be turned on."
+"<br>Don't turn this off unless you know what you're doing."
+msgstr ""
+"啟動這個核心時要以唯讀方式掛載的檔案系統。一般而言， init 命令稿會在一些檢查之後，將根檔案系統重新掛載為讀寫模式，這應該要被開啟。"
+"<br>不要關閉這個功能除非您非常確定。"
+
+#: kde/Details.cpp:78 qt/Details.cpp:80
+msgid "Do not check &partition table"
+msgstr "不要檢查分割表(&P)"
+
+#: kde/Details.cpp:79
+msgid ""
+"This turns off some sanity checks while writing the configuration. This should "
+"not be used under \"normal\" circumstances, but it can be useful, for example, "
+"by providing the capability of booting from a floppy disk, without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+"這個功能關閉一些寫入設定檔時的檢查。在“一般”的情形下，這不應該被使用，但是這仍是有用的，例如提供自軟碟開機的功能而不需要在每次執行 lilo 時放入軟碟片。"
+"<br>這會設定 lilo.conf 中的 <i>unsafe</i> 關鍵字。"
+
+#: kde/Details.cpp:83 qt/Details.cpp:86
+msgid ""
+"Checking this box enables automatic recording of boot command lines as the "
+"default for the following bootups. This way, lilo \"locks\" on a choice until "
+"it is manually overridden."
+"<br>This sets the <b>lock</b> option in lilo.conf"
+msgstr ""
+"啟動這個功能以啟動自動紀錄開機指令的功能，並將之作為往後開機的預設值。這種方式會讓 LILO “鎖定”這個選擇直到手動變更。"
+"<br>這會設定 lilo.conf 中的 <b>lock</b> 選項。"
+
+#: kde/Details.cpp:86 qt/Details.cpp:89
+msgid ""
+"If this box is checked, a password (entered below) is required only if any "
+"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
+"linux single</i> or <i>linux init=/bin/sh</i>).\n"
+"This sets the <b>restricted</b> option in lilo.conf."
+msgstr ""
+"如果核取這個方塊，要變更任何參數時，在下面輸入的密碼是必須的。也就是使用者可以啟動 <i>linux</i> 但不能使用 <i>linux single</i> "
+"或 <i>linux init=/bin/sh</i>。\n"
+"這會設定 lilo.conf 中的 <b>restricted</b> 選項。"
+
+#: kde/Details.cpp:94 qt/Details.cpp:98
+msgid ""
+"Enter the password required for bootup (if any) here. If <i>restricted</i> "
+"above is checked, the password is required for additional parameters only."
+"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
+"You'll want to make sure nobody untrusted can read this file. Also, you "
+"probably don't want to use your normal/root password here."
+msgstr ""
+"在這邊輸入開機時需要的密碼（如果有的話）。如果使用了上面的 <i>限制參數</i> 功能，必須要使用這個密碼才能變更參數。"
+"<br><b>警告：</b> 這個密碼是以未編碼的方式存在 /etc/lilo.conf "
+"中。您必須確定未授權的人不能讀取這個檔案。同時，建議不要使用您的一般/管理者密碼。"
+
+#: kde/kcontrol.cpp:48
+msgid "kcmlilo"
+msgstr "kcmlilo"
+
+#: kde/kcontrol.cpp:48
+msgid "LILO Configuration"
+msgstr "LILO 組態"
+
+#: kde/kcontrol.cpp:50
+msgid "(c) 2000, Bernhard Rosenkraenzer"
+msgstr "(c) 2000, Bernhard Rosenkraenzer"
+
+#: qt/Details.cpp:81
+msgid ""
+"This turns off some sanity checks while writing the configuration. This "
+"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
+"for installing the possibility to boot from a floppy disk without having a "
+"floppy in the drive every time you run lilo."
+"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
+msgstr ""
+"這個功能關閉一些寫入設定檔時的檢查，在“一般”的情形下，這不應該被使用。但是這仍是有用的，例如提供自軟碟開機的功能而不需要在每次執行 lilo 時放入軟碟片。"
+"<br>這會設定 lilo.conf 中的 <i>unsafe</i> 關鍵字。"
+
+#: qt/standalone.cpp:41
+msgid "&What's This?"
+msgstr "這是什麼？(&W)"
+
+#: qt/standalone.cpp:43
+msgid ""
+"The <i>What's This?</i> button is part of this program's help system. Click on "
+"the What's This? button then on any widget in the window to get information "
+"(like this) on it."
+msgstr "<i>這是什麼？</i> 按鈕是這個程式說明系統的一部份。按下這個按鈕以及任何程式元件以取得像這樣的說明視窗。"
+
+#: qt/standalone.cpp:47
+msgid ""
+"This button calls up the program's online help system. If it does nothing, no "
+"help file has been written (yet); in that case, use the <i>What's This</i> "
+"button on the left."
+msgstr "這個按鈕呼叫程式的線上說明系統。如果它沒有作用，是因為目前沒有說明檔案；此時，請使用右邊的 <i>這是什麼？</i> 按鈕。"
+
+#: qt/standalone.cpp:49
+msgid "&Default"
+msgstr "預設(&D)"
+
+#: qt/standalone.cpp:50
+msgid ""
+"This button resets all parameters to some (hopefully sane) default values."
+msgstr "這個按鈕重設所有的參數回預設值。"
+
+#: qt/standalone.cpp:52
+msgid "&Reset"
+msgstr "重設(&R)"
+
+#: qt/standalone.cpp:53
+msgid ""
+"This button resets all parameters to what they were before you started the "
+"program."
+msgstr "這個按鈕重設所有的參數回到您啟動此應用程式前的狀況。"
+
+#: qt/standalone.cpp:56
+msgid "This button saves all your changes without exiting."
+msgstr "這個按鈕儲存您的設定但不關閉程式。"
+
+#: qt/standalone.cpp:59
+msgid "This button saves all your changes and exits the program."
+msgstr "這個按鈕儲存您的設定並關閉程式。"
+
+#: qt/standalone.cpp:62
+msgid "This button exits the program without saving your changes."
+msgstr "這個按鈕關閉程式而不儲存您的設定。"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Chao-Hsiung Liao"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "pesder.liao@msa.hinet.net"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kcron.po b/tde-i18n-zh_TW/messages/kdeadmin/kcron.po
new file mode 100644
index 00000000000..339acce3c59
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kcron.po
@@ -0,0 +1,684 @@
+# translation of kcron.po to Traditional Chinese
+# Traditional Chinese Translation of kcron
+# Copyright (C) 2002, 2006 Free Software Foundation, Inc.
+# Eric Cheng <ericc@shinewave.com.tw>, 2001.
+# Yuan-Chen Cheng <ycheng@slat.org>, 2002.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kcron\n"
+"POT-Creation-Date: 2007-05-25 02:16+0200\n"
+"PO-Revision-Date: 2006-01-16 16:23+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Franklin"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: ctcron.cpp:54 ktlistcron.cpp:44
+msgid "(System Crontab)"
+msgstr "(系統 Crontab)"
+
+#: ctcron.cpp:63
+msgid "No password entry found for user '%1'"
+msgstr "找不到 user %1 的密碼資料。"
+
+#: ctcron.cpp:74
+msgid "No password entry found for uid '%1'"
+msgstr "找不到 uid %1 的密碼資料。"
+
+#: ctcron.cpp:274
+msgid "An error occurred while updating crontab."
+msgstr "更新 crontab 時發生錯誤。"
+
+#: ctdom.cpp:33 ctdow.cpp:58 cttask.cpp:316
+msgid "every day "
+msgstr "每天 "
+
+#: ctdom.cpp:50
+msgid "1st"
+msgstr "一日"
+
+#: ctdom.cpp:50
+msgid "2nd"
+msgstr "二日"
+
+#: ctdom.cpp:51
+msgid "3rd"
+msgstr "三日"
+
+#: ctdom.cpp:51
+msgid "4th"
+msgstr "四日"
+
+#: ctdom.cpp:52
+msgid "5th"
+msgstr "五日"
+
+#: ctdom.cpp:52
+msgid "6th"
+msgstr "六日"
+
+#: ctdom.cpp:53
+msgid "7th"
+msgstr "七日"
+
+#: ctdom.cpp:53
+msgid "8th"
+msgstr "八日"
+
+#: ctdom.cpp:54
+msgid "9th"
+msgstr "九日"
+
+#: ctdom.cpp:54
+msgid "10th"
+msgstr "十日"
+
+#: ctdom.cpp:55
+msgid "11th"
+msgstr "十一日"
+
+#: ctdom.cpp:55
+msgid "12th"
+msgstr "十二日"
+
+#: ctdom.cpp:56
+msgid "13th"
+msgstr "十三日"
+
+#: ctdom.cpp:56
+msgid "14th"
+msgstr "十四日"
+
+#: ctdom.cpp:57
+msgid "15th"
+msgstr "十五日"
+
+#: ctdom.cpp:57
+msgid "16th"
+msgstr "十六日"
+
+#: ctdom.cpp:58
+msgid "17th"
+msgstr "十七日"
+
+#: ctdom.cpp:58
+msgid "18th"
+msgstr "十八日"
+
+#: ctdom.cpp:59
+msgid "19th"
+msgstr "十九日"
+
+#: ctdom.cpp:59
+msgid "20th"
+msgstr "二十日"
+
+#: ctdom.cpp:60
+msgid "21st"
+msgstr "二十一日"
+
+#: ctdom.cpp:60
+msgid "22nd"
+msgstr "二十二日"
+
+#: ctdom.cpp:61
+msgid "23rd"
+msgstr "二十三日"
+
+#: ctdom.cpp:61
+msgid "24th"
+msgstr "二十四日"
+
+#: ctdom.cpp:62
+msgid "25th"
+msgstr "二十五日"
+
+#: ctdom.cpp:62
+msgid "26th"
+msgstr "二十六日"
+
+#: ctdom.cpp:63
+msgid "27th"
+msgstr "二十七日"
+
+#: ctdom.cpp:63
+msgid "28th"
+msgstr "二十八日"
+
+#: ctdom.cpp:64
+msgid "29th"
+msgstr "二十九日"
+
+#: ctdom.cpp:64
+msgid "30th"
+msgstr "三十日"
+
+#: ctdom.cpp:65
+msgid "31st"
+msgstr "三十一日"
+
+#: ctdow.cpp:60
+msgid "weekday "
+msgstr "工作日"
+
+#: ctdow.cpp:78
+msgid "Mon"
+msgstr "星期一"
+
+#: ctdow.cpp:78
+msgid "Tue"
+msgstr "星期二"
+
+#: ctdow.cpp:79
+msgid "Wed"
+msgstr "星期三"
+
+#: ctdow.cpp:79
+msgid "Thu"
+msgstr "星期四"
+
+#: ctdow.cpp:80
+msgid "Fri"
+msgstr "星期五"
+
+#: ctdow.cpp:80
+msgid "Sat"
+msgstr "星期六"
+
+#: ctdow.cpp:81
+msgid "Sun"
+msgstr "星期日"
+
+#: ctmonth.cpp:32
+msgid "every month "
+msgstr "每月 "
+
+#: ctmonth.cpp:49
+msgid "January"
+msgstr "一月"
+
+#: ctmonth.cpp:49
+msgid "February"
+msgstr "二月"
+
+#: ctmonth.cpp:50
+msgid "March"
+msgstr "三月"
+
+#: ctmonth.cpp:50
+msgid "April"
+msgstr "四月"
+
+#: ctmonth.cpp:51
+msgid ""
+"_: May long\n"
+"May"
+msgstr "五月"
+
+#: ctmonth.cpp:51
+msgid "June"
+msgstr "六月"
+
+#: ctmonth.cpp:52
+msgid "July"
+msgstr "七月"
+
+#: ctmonth.cpp:52
+msgid "August"
+msgstr "八月"
+
+#: ctmonth.cpp:53
+msgid "September"
+msgstr "九月"
+
+#: ctmonth.cpp:53
+msgid "October"
+msgstr "十月"
+
+#: ctmonth.cpp:54
+msgid "November"
+msgstr "十一月"
+
+#: ctmonth.cpp:54
+msgid "December"
+msgstr "十二月"
+
+#: cttask.cpp:251
+msgid "%H:%M"
+msgstr "%H:%M"
+
+#: cttask.cpp:252
+msgid ""
+"_: Please translator, read the README.translators file in kcron's source code\n"
+"DAYS_OF_MONTH of MONTHS"
+msgstr "MONTHS 月 DAYS_OF_MONTH 日"
+
+#: cttask.cpp:253
+msgid ""
+"_: Really, read that file\n"
+"every DAYS_OF_WEEK"
+msgstr "每 DAYS_OF_WEEK"
+
+#: cttask.cpp:254
+msgid "DOM_FORMAT as well as DOW_FORMAT"
+msgstr "DOM_FORMAT 以及 DOW_FORMAT"
+
+#: cttask.cpp:255
+msgid "At TIME"
+msgstr "在 TIME"
+
+#: cttask.cpp:256
+msgid "TIME_FORMAT, DATE_FORMAT"
+msgstr "TIME_FORMAT, DATE_FORMAT"
+
+#: cttask.cpp:302
+msgid ", and "
+msgstr "，和 "
+
+#: cttask.cpp:304 ctunit.cpp:187
+msgid " and "
+msgstr " 和 "
+
+#: cttask.cpp:306 ctunit.cpp:189
+msgid ", "
+msgstr "， "
+
+#: ctunit.cpp:186
+msgid ","
+msgstr "，"
+
+#: ktapp.cpp:42 ktapp.cpp:381
+msgid "Task Scheduler"
+msgstr "工作排程器"
+
+#: ktapp.cpp:72
+msgid ""
+"The following error occurred while initializing KCron:\n"
+"\n"
+"%1\n"
+"\n"
+"KCron will now exit.\n"
+msgstr ""
+"初始化 KCron 時發生以下錯誤：\n"
+"\n"
+"%1\n"
+"\n"
+"KCron 將會結束執行。\n"
+
+#: ktapp.cpp:96
+msgid ""
+"You can use this application to schedule programs to run in the background.\n"
+"To schedule a new task now, click on the Tasks folder and select Edit/New from "
+"the menu."
+msgstr ""
+"你可以使用這個程式來排程程式在背景執行。\n"
+"要立刻排程一個新工作，請按下工作資料夾並從選單中選編輯/新增。"
+
+#: ktapp.cpp:96
+msgid "Welcome to the Task Scheduler"
+msgstr "歡迎來到工作排程器"
+
+#: ktapp.cpp:131
+msgid "&New..."
+msgstr "新增(&N)..."
+
+#: ktapp.cpp:133
+msgid "M&odify..."
+msgstr "修改(&O)..."
+
+#: ktapp.cpp:135 kttask.cpp:171 ktvariable.cpp:74
+msgid "&Enabled"
+msgstr "啟用(&E)"
+
+#: ktapp.cpp:136
+msgid "&Run Now"
+msgstr "立即執行(&R)"
+
+#: ktapp.cpp:146 ktapp.cpp:257 ktapp.cpp:268 ktapp.cpp:288 ktapp.cpp:295
+#: ktapp.cpp:302 ktapp.cpp:309 ktapp.cpp:316 ktapp.cpp:323 ktapp.cpp:341
+#: ktapp.cpp:348 ktapp.cpp:361 ktapp.cpp:374
+msgid "Ready."
+msgstr "準備完成。"
+
+#: ktapp.cpp:214
+msgid ""
+"Scheduled tasks have been modified.\n"
+"Do you want to save changes?"
+msgstr ""
+"您已修改了排定的工作，\n"
+"您要儲存變更嗎?"
+
+#: ktapp.cpp:255
+msgid "Saving..."
+msgstr "儲存中..."
+
+#: ktapp.cpp:266
+msgid "Printing..."
+msgstr "列印中..."
+
+#: ktapp.cpp:285
+msgid "Cutting to clipboard..."
+msgstr "剪下至剪貼簿..."
+
+#: ktapp.cpp:293
+msgid "Copying to clipboard..."
+msgstr "複製至剪貼簿..."
+
+#: ktapp.cpp:300
+msgid "Pasting from clipboard..."
+msgstr "自剪貼簿貼上..."
+
+#: ktapp.cpp:307
+msgid "Adding new entry..."
+msgstr "新增項目..."
+
+#: ktapp.cpp:314
+msgid "Modifying entry..."
+msgstr "修改項目..."
+
+#: ktapp.cpp:321
+msgid "Deleting entry..."
+msgstr "刪除項目..."
+
+#: ktapp.cpp:331
+msgid "Disabling entry..."
+msgstr "停用項目..."
+
+#: ktapp.cpp:337
+msgid "Enabling entry..."
+msgstr "啟用項目..."
+
+#: ktapp.cpp:346
+msgid "Running command..."
+msgstr "執行指令..."
+
+#: ktapp.cpp:395
+msgid "Create a new task or variable."
+msgstr "建立新工作或變數。"
+
+#: ktapp.cpp:398
+msgid "Edit the selected task or variable."
+msgstr "編輯選定的工作或變數。"
+
+#: ktapp.cpp:401
+msgid "Delete the selected task or variable."
+msgstr "刪除選定的工作或變數。"
+
+#: ktapp.cpp:404
+msgid "Enable/disable the selected task or variable."
+msgstr "啟用/停用選定的工作或變數。"
+
+#: ktapp.cpp:407
+msgid "Run the selected task now."
+msgstr "立即執行選定的工作。"
+
+#: ktapp.cpp:421
+msgid "Enable/disable the tool bar."
+msgstr "啟用/停用工具列。"
+
+#: ktapp.cpp:424
+msgid "Enable/disable the status bar."
+msgstr "啟用/停用狀態列。"
+
+#: ktlisttask.cpp:43 ktlistvar.cpp:43
+msgid "Disabled"
+msgstr "停用"
+
+#: ktlisttask.cpp:57 ktlistvar.cpp:66
+msgid "Disabled."
+msgstr "停用。"
+
+#: ktlisttask.cpp:62
+msgid "Modify Task"
+msgstr "編輯工作"
+
+#: ktlisttasks.cpp:41
+msgid "Tasks"
+msgstr "工作"
+
+#: ktlisttasks.cpp:47
+msgid "Edit Task"
+msgstr "編輯工作"
+
+#: ktlisttasks.cpp:74
+msgid "Task name:"
+msgstr "工作名稱："
+
+#: ktlisttasks.cpp:75
+msgid "Program:"
+msgstr "程式:"
+
+#: ktlisttasks.cpp:76 ktlistvars.cpp:72
+msgid "Description:"
+msgstr "描述:"
+
+#: ktlisttasks.cpp:85
+msgid "No tasks..."
+msgstr "沒有工作..."
+
+#: ktlistvar.cpp:72
+msgid "Modify Variable"
+msgstr "編輯變數"
+
+#: ktlistvars.cpp:43
+msgid "Edit Variable"
+msgstr "編輯變數"
+
+#: ktlistvars.cpp:70
+msgid "Variable:"
+msgstr "變數:"
+
+#: ktlistvars.cpp:71
+msgid "Value:"
+msgstr "數值:"
+
+#: ktlistvars.cpp:81
+msgid "No variables..."
+msgstr "沒有變數..."
+
+#: ktlistvars.cpp:98
+msgid "Variables"
+msgstr "變數"
+
+#: ktprint.cpp:81
+msgid "Print Cron Tab"
+msgstr "列印 Crontab"
+
+#: ktprintopt.cpp:26
+msgid "Cron Options"
+msgstr "Cron 選項"
+
+#: ktprintopt.cpp:30
+msgid "Print cron&tab"
+msgstr "列印 Crontab(&T)"
+
+#: ktprintopt.cpp:33
+msgid "Print &all users"
+msgstr "列印所有使用者(&A)"
+
+#: kttask.cpp:112
+msgid "&Run as:"
+msgstr "執行成(&R):"
+
+#: kttask.cpp:138
+msgid "&Comment:"
+msgstr "註解(&C):"
+
+#: kttask.cpp:150
+msgid "&Program:"
+msgstr "程式(&P):"
+
+#: kttask.cpp:165
+msgid "&Browse..."
+msgstr "瀏覽(&B)..."
+
+#: kttask.cpp:176
+msgid "&Silent"
+msgstr "無聲(&S)"
+
+#: kttask.cpp:185
+msgid "Months"
+msgstr "個月"
+
+#: kttask.cpp:201 kttask.cpp:234 kttask.cpp:254 kttask.cpp:314 kttask.cpp:343
+#: kttask.cpp:712 kttask.cpp:741 kttask.cpp:750 kttask.cpp:779 kttask.cpp:788
+#: kttask.cpp:817 kttask.cpp:826 kttask.cpp:855 kttask.cpp:864 kttask.cpp:893
+msgid "Set All"
+msgstr "全部設定"
+
+#: kttask.cpp:207
+msgid "Days of Month"
+msgstr "月份中的天數"
+
+#: kttask.cpp:238
+msgid "Days of Week"
+msgstr "星期中的天數"
+
+#: kttask.cpp:260
+msgid "Daily"
+msgstr "每日"
+
+#: kttask.cpp:266
+msgid "Run every day"
+msgstr "每天執行"
+
+#: kttask.cpp:271
+msgid "Hours"
+msgstr "小時"
+
+#: kttask.cpp:276
+msgid "AM"
+msgstr "AM"
+
+#: kttask.cpp:299
+msgid "PM"
+msgstr "PM"
+
+#: kttask.cpp:318
+msgid "Minutes"
+msgstr "分鐘"
+
+#: kttask.cpp:528
+msgid ""
+"Please enter the following to schedule the task:\n"
+msgstr ""
+"請輸入下列資訊以方便安排工作:\n"
+
+#: kttask.cpp:534
+msgid "the program to run"
+msgstr "執行的程式"
+
+#: kttask.cpp:546
+msgid "the months"
+msgstr "月份"
+
+#: kttask.cpp:567
+msgid "either the days of the month or the days of the week"
+msgstr "月份中的天數或星期中的天數"
+
+#: kttask.cpp:583
+msgid "the hours"
+msgstr "小時"
+
+#: kttask.cpp:599
+msgid "the minutes"
+msgstr "分鐘"
+
+#: kttask.cpp:627
+msgid "Cannot locate program. Please re-enter."
+msgstr "找不到程式。請重新輸入。"
+
+#: kttask.cpp:635
+msgid "Program is not an executable file. Please re-enter."
+msgstr "程式不是可執行檔。請重新輸入。"
+
+#: kttask.cpp:703
+msgid "Only local or mounted files can be executed by crontab."
+msgstr "只有本機或掛載的檔案可以被 crontab 執行。"
+
+#: ktvariable.cpp:37
+msgid "&Variable:"
+msgstr "變數(&V):"
+
+#: ktvariable.cpp:55
+msgid "Va&lue:"
+msgstr "數值(&L):"
+
+#: ktvariable.cpp:64
+msgid "Co&mment:"
+msgstr "註解(&M):"
+
+#: ktvariable.cpp:106
+msgid "Override default home folder."
+msgstr "覆寫預設的家目錄。"
+
+#: ktvariable.cpp:111
+msgid "Email output to specified account."
+msgstr "將輸出結果郵寄到特定帳戶。"
+
+#: ktvariable.cpp:116
+msgid "Override default shell."
+msgstr "覆寫預設的 shell。"
+
+#: ktvariable.cpp:121
+msgid "Folders to search for program files."
+msgstr "搜尋程式檔案的目錄。"
+
+#: ktvariable.cpp:133
+msgid "Please enter the variable name."
+msgstr "請輸入變數名稱。"
+
+#: ktvariable.cpp:140
+msgid "Please enter the variable value."
+msgstr "請輸入變數數值。"
+
+#: ktview.cpp:104
+msgid "Users/Tasks/Variables"
+msgstr "使用者/工作/變數"
+
+#: ktview.cpp:106
+msgid "Tasks/Variables"
+msgstr "工作/變數"
+
+#: ktview.cpp:108
+msgid "Value"
+msgstr "數值"
+
+#: ktview.cpp:109
+msgid "Description"
+msgstr "描述"
+
+#: ktview.cpp:275
+msgid ""
+"_: user on host\n"
+"%1 <%2> on %3"
+msgstr "%1 <%2> 在 %3"
+
+#: ktview.cpp:283
+msgid "Scheduled Tasks"
+msgstr "排程的工作"
+
+#: main.cpp:20
+msgid "KDE Task Scheduler"
+msgstr "KDE 工作排程器"
+
+#: main.cpp:22
+msgid "KCron"
+msgstr "KCron"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kdat.po b/tde-i18n-zh_TW/messages/kdeadmin/kdat.po
new file mode 100644
index 00000000000..8d739a4c908
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kdat.po
@@ -0,0 +1,1231 @@
+# translation of kdat.po to Chinese (traditional)
+# Frank Weng <franklin at goodhorse dot idv dot tw>, 2005.
+msgid ""
+msgstr ""
+"Project-Id-Version: kdat\n"
+"POT-Creation-Date: 2008-07-08 01:20+0200\n"
+"PO-Revision-Date: 2005-12-08 14:19+0800\n"
+"Last-Translator: Frank Weng <franklin at goodhorse dot idv dot tw>\n"
+"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: ArchiveInfoWidget.cpp:42 BackupProfileWidget.cpp:42
+msgid "Archive name:"
+msgstr "歸檔名："
+
+#: ArchiveInfoWidget.cpp:43 FileInfoWidget.cpp:43 TapeInfoWidget.cpp:47
+msgid "Created on:"
+msgstr "建立時間："
+
+#: ArchiveInfoWidget.cpp:44 FileInfoWidget.cpp:46 TapeFileInfoWidget.cpp:38
+msgid "Size:"
+msgstr "大小："
+
+#: BackupDlg.cpp:79 BackupDlg.cpp:80
+msgid "KDat: Backup"
+msgstr "KDat：備份"
+
+#: BackupDlg.cpp:95 IndexDlg.cpp:72 VerifyDlg.cpp:91
+msgid "Elapsed time:"
+msgstr "用去時間："
+
+#: BackupDlg.cpp:98 BackupDlg.cpp:104 IndexDlg.cpp:75 VerifyDlg.cpp:94
+#: VerifyDlg.cpp:100
+msgid "00:00:00"
+msgstr "00:00:00"
+
+#: BackupDlg.cpp:101 VerifyDlg.cpp:97
+msgid "Time remaining:"
+msgstr "剩餘時間："
+
+#: BackupDlg.cpp:107 VerifyDlg.cpp:103
+msgid "Total KB:"
+msgstr "大小總計 (KB)："
+
+#: BackupDlg.cpp:113
+msgid "KB written:"
+msgstr "已寫 KB 數："
+
+#: BackupDlg.cpp:116 IndexDlg.cpp:87 VerifyDlg.cpp:112
+msgid "0KB"
+msgstr "0KB"
+
+#: BackupDlg.cpp:119 IndexDlg.cpp:96 VerifyDlg.cpp:115
+msgid "Transfer rate:"
+msgstr "傳輸速率："
+
+#: BackupDlg.cpp:122 IndexDlg.cpp:99 VerifyDlg.cpp:118
+msgid "0KB/min"
+msgstr "0KB/分"
+
+#: BackupDlg.cpp:125 IndexDlg.cpp:90 VerifyDlg.cpp:123
+msgid "Files:"
+msgstr "檔案："
+
+#: BackupDlg.cpp:128 IndexDlg.cpp:81 IndexDlg.cpp:93 IndexDlg.cpp:105
+msgid "0"
+msgstr "0"
+
+#: BackupDlg.cpp:131
+msgid "Backup log:"
+msgstr "備份紀錄："
+
+#: BackupDlg.cpp:138 IndexDlg.cpp:115
+msgid "Save Log..."
+msgstr "保存紀錄..."
+
+#: BackupDlg.cpp:279
+msgid "No files to back up. Aborting."
+msgstr "沒有要備份的檔案。放棄。"
+
+#: BackupDlg.cpp:342
+msgid "*** Write failed, giving up."
+msgstr "*** 寫入失敗，放棄。"
+
+#: BackupDlg.cpp:412 BackupDlg.cpp:422 IndexDlg.cpp:345 VerifyDlg.cpp:395
+#: VerifyDlg.cpp:405
+#, c-format
+msgid "%02d:%02d:%02d"
+msgstr "%02d:%02d:%02d"
+
+#: BackupDlg.cpp:429 IndexDlg.cpp:352 VerifyDlg.cpp:412
+msgid "%1/min"
+msgstr "%1/分鐘"
+
+#: BackupOptDlg.cpp:36 BackupOptDlg.cpp:37
+msgid "KDat: Backup Options"
+msgstr "KDat：備份選項"
+
+#: BackupProfileInfoWidget.cpp:43
+msgid "Backup profile name:"
+msgstr "備份設定檔名："
+
+#: BackupProfileInfoWidget.cpp:54
+msgid "Files >>"
+msgstr "檔案 >>"
+
+#: BackupProfileInfoWidget.cpp:57
+msgid "<< Files"
+msgstr "<< 檔案"
+
+#: BackupProfileWidget.cpp:40 KDatMainWindow.cpp:164 KDatMainWindow.cpp:492
+msgid "Backup"
+msgstr "備份"
+
+#: BackupProfileWidget.cpp:48
+msgid "Working folder:"
+msgstr "工作目錄："
+
+#: BackupProfileWidget.cpp:54
+msgid "Backup files:"
+msgstr "備份檔案："
+
+#: BackupProfileWidget.cpp:60
+msgid "Tar Options"
+msgstr "Tar 選項"
+
+#: BackupProfileWidget.cpp:62
+msgid "Stay on one filesystem"
+msgstr "留在同一檔案系統內"
+
+#: BackupProfileWidget.cpp:65
+msgid "GNU listed incremental"
+msgstr "GNU 列出遞增"
+
+#: BackupProfileWidget.cpp:69
+msgid "Snapshot file:"
+msgstr "快照檔案："
+
+#: BackupProfileWidget.cpp:75
+msgid "Remove snapshot file before backup"
+msgstr "在備份之前刪除快照檔案"
+
+#: ErrorHandler.cpp:51
+msgid ""
+" caught.\n"
+"Exit the program from File->Quit or do \"kill -9 <pid>\" if you like.\n"
+msgstr ""
+"出現。\n"
+"您可以由檔案->離開，或是用 kill -9 <pid> 來離開程式。\n"
+
+#: ErrorHandler.cpp:55
+msgid ""
+"You can dump core by selecting the \"Abort\" button.\n"
+"Please notify the maintainer (see Help->About KDat)."
+msgstr ""
+"您選擇「中斷」可以產生 core 檔案。\n"
+"並請知會維護者 (請參考「關於 KDat」)。"
+
+#: ErrorHandler.cpp:62
+msgid "An Error Signal was Received"
+msgstr "接到一個錯誤信號"
+
+#: ErrorHandler.cpp:69
+msgid "SIGHUP signal (\"Hangup (POSIX)\")"
+msgstr "收到 SIGHUP 信號 (POSIX Hangup 信號)"
+
+#: ErrorHandler.cpp:77
+msgid "SIGINT signal (\"Interrupt (ANSI)\")"
+msgstr "收到 SIGINT 信號 (ANSI 中斷信號)"
+
+#: ErrorHandler.cpp:85
+msgid "SIGFPE signal (\"Floating-point exception (ANSI)\")"
+msgstr "收到 SIGFPE 信號 (ANSI 的浮點運算錯誤信號)"
+
+#: ErrorHandler.cpp:93
+msgid "SIGSEGV signal (\"Segmentation violation (ANSI)\")"
+msgstr "收到 SIGSEGV 信號 (ANSI 區段記憶體錯誤信號)"
+
+#: ErrorHandler.cpp:102
+msgid "SIGTERM signal (\"Termination (ANSI)\")"
+msgstr "收到 SIGTERM 信號 (ANSI 結束信號)"
+
+#: FileInfoWidget.cpp:42 TapeFileInfoWidget.cpp:36
+msgid "File name:"
+msgstr "檔案名："
+
+#: FileInfoWidget.cpp:44 TapeFileInfoWidget.cpp:37 TapeInfoWidget.cpp:48
+msgid "Last modified:"
+msgstr "最後修改："
+
+#: FileInfoWidget.cpp:45
+msgid "Last accessed:"
+msgstr "最後讀取："
+
+#: FileInfoWidget.cpp:47
+msgid "Owner:"
+msgstr "擁有者："
+
+#: FileInfoWidget.cpp:48
+msgid "Group:"
+msgstr "群組："
+
+#: FormatOptDlg.cpp:40 FormatOptDlg.cpp:41
+msgid "KDat: Format Options"
+msgstr "KDat：格式化選項"
+
+#: FormatOptDlg.cpp:43 TapeInfoWidget.cpp:44
+msgid "Tape name:"
+msgstr "磁帶名："
+
+#: FormatOptDlg.cpp:44 TapeInfoWidget.cpp:45
+msgid "Tape size:"
+msgstr "磁帶容量："
+
+#: IndexDlg.cpp:59 IndexDlg.cpp:60
+msgid "KDat: Index"
+msgstr "KDat：索引"
+
+#: IndexDlg.cpp:78
+msgid "Archives:"
+msgstr "歸檔："
+
+#: IndexDlg.cpp:84 VerifyDlg.cpp:109
+msgid "KB read:"
+msgstr "已讀取 KB 數："
+
+#: IndexDlg.cpp:102
+msgid "Total files:"
+msgstr "所有檔案："
+
+#: IndexDlg.cpp:108
+msgid "Index log:"
+msgstr "索引紀錄："
+
+#: IndexDlg.cpp:120
+msgid "Abort"
+msgstr "中斷"
+
+#: IndexDlg.cpp:233
+msgid "Rewinding tape."
+msgstr "正在倒帶。"
+
+#: IndexDlg.cpp:235
+msgid "Cannot rewind tape. Indexing aborted."
+msgstr "不能倒帶。中止索引。"
+
+#: IndexDlg.cpp:239
+msgid "Cannot rewind tape."
+msgstr "不能倒帶。"
+
+#: IndexDlg.cpp:245
+msgid "Failed to skip tape ID. Indexing aborted."
+msgstr "無法跳過磁帶 ID。中止索引。"
+
+#: IndexDlg.cpp:249
+msgid "Failed to skip tape ID."
+msgstr "無法跳過磁帶 ID。"
+
+#: IndexDlg.cpp:278
+#, c-format
+msgid "Indexing archive %1."
+msgstr "正在對歸檔 %1 索引。"
+
+#: IndexDlg.cpp:281
+#, c-format
+msgid "Archive %1"
+msgstr "歸檔 %1"
+
+#: IndexDlg.cpp:330
+msgid "Reindexed Tape"
+msgstr "重新索引的磁帶"
+
+#: KDatMainWindow.cpp:96 KDatMainWindow.cpp:97 KDatMainWindow.cpp:1239
+msgid "KDat: <no tape>"
+msgstr "KDat：<無磁帶>"
+
+#: KDatMainWindow.cpp:101 KDatMainWindow.cpp:137 KDatMainWindow.cpp:251
+#: KDatMainWindow.cpp:1293
+msgid "Mount Tape"
+msgstr "掛載磁帶"
+
+#: KDatMainWindow.cpp:102 KDatMainWindow.cpp:138
+msgid "Recreate Tape Index"
+msgstr "重新建立磁帶索引"
+
+#: KDatMainWindow.cpp:104 KDatMainWindow.cpp:144
+msgid "Format Tape..."
+msgstr "格式化磁帶..."
+
+#: KDatMainWindow.cpp:107 KDatMainWindow.cpp:113 KDatMainWindow.cpp:141
+#: KDatMainWindow.cpp:781 KDatMainWindow.cpp:795
+msgid "Delete Archive"
+msgstr "刪除歸檔"
+
+#: KDatMainWindow.cpp:110 KDatMainWindow.cpp:116 KDatMainWindow.cpp:136
+msgid "Verify..."
+msgstr "檢驗..."
+
+#: KDatMainWindow.cpp:111 KDatMainWindow.cpp:117 KDatMainWindow.cpp:135
+msgid "Restore..."
+msgstr "資料重建..."
+
+#: KDatMainWindow.cpp:120 KDatMainWindow.cpp:129 KDatMainWindow.cpp:134
+msgid "Backup..."
+msgstr "備份..."
+
+#: KDatMainWindow.cpp:123 KDatMainWindow.cpp:829
+msgid "Delete Tape Index"
+msgstr "刪除磁帶索引"
+
+#: KDatMainWindow.cpp:126 KDatMainWindow.cpp:139
+msgid "Create Backup Profile"
+msgstr "建立備份設定"
+
+#: KDatMainWindow.cpp:131 KDatMainWindow.cpp:143 KDatMainWindow.cpp:951
+msgid "Delete Backup Profile"
+msgstr "刪除備份設定"
+
+#: KDatMainWindow.cpp:142
+msgid "Delete Index"
+msgstr "刪除索引"
+
+#: KDatMainWindow.cpp:149
+msgid "Configure KDat..."
+msgstr "設定 KDat..."
+
+#: KDatMainWindow.cpp:155
+msgid ""
+"KDat Version %1\n"
+"\n"
+"KDat is a tar-based tape archiver.\n"
+"\n"
+"Copyright (c) 1998-2000 Sean Vyain\n"
+"Copyright (c) 2001-2002 Lawrence Widman\n"
+"kdat@cardiothink.com"
+msgstr ""
+"KDat %1 版\n"
+"\n"
+"KDat是基於 tar 命令的磁帶歸檔程式。\n"
+"\n"
+"Copyright (c) 1998-2000 Sean Vyain\n"
+"Copyright (c) 2001-2002 Lawrence Widman\n"
+"kdat@cardiothink.com"
+
+#: KDatMainWindow.cpp:160
+msgid "Mount/unmount tape"
+msgstr "掛載/卸載磁帶"
+
+#: KDatMainWindow.cpp:168
+msgid "Verify"
+msgstr "檢驗"
+
+#: KDatMainWindow.cpp:173
+msgid "Ready."
+msgstr "就緒。"
+
+#: KDatMainWindow.cpp:248 KDatMainWindow.cpp:1290
+msgid "Unmount Tape"
+msgstr "卸載磁帶"
+
+#: KDatMainWindow.cpp:419
+msgid ""
+"KDat will dump your files properly to tape, but may not be able\n"
+"to restore them. To restore your files by hand, you need to know\n"
+"the name of the *non-rewinding* version of your tape device %1.\n"
+msgstr ""
+"KDat 會將您的檔案存進磁帶中。要將檔案從磁帶中取出，您必須知道您的磁帶機設備 %1 的「不迴帶設備名稱」 (non-rewinding device "
+"name)。\n"
+
+#: KDatMainWindow.cpp:423
+msgid ""
+"For example, if your device is /dev/st0, the non-rewinding version\n"
+"is /dev/nst0. If your device name doesn't look like that, type\n"
+"\"ls -l %2\" in a terminal window to see the real name of your\n"
+"tape drive. Substitute that name for /dev/nst0 below.\n"
+"Open a terminal window and type the following:\n"
+"  tar tfv /dev/nst0; tar tfv /dev/nst0\n"
+"  tar xfv /dev/nst0\n"
+"The third call to \"tar\" will retrieve your data into your\n"
+"current directory. Please let us know if this happens to you!\n"
+" - KDat Maintenance Team\n"
+msgstr ""
+"例如，如果您的磁帶機設備名稱是 /dev/st0，「不迴帶設備名稱」就是 /dev/nst0。\n"
+"如果您的設備名稱不是像這樣，請輸入 ls -l %2 看看您的磁帶機設備名稱，並將以下說明的 /dev/nst0 換成您的設備名稱。\n"
+"開啟終端機視窗，輸入下列命令：\n"
+"tar tfv /dev/nst0; tar tfv /dev/nst0\n"
+"tar xfv /dev/nst0\n"
+"第三個 tar 會將資料讀到您目前的目錄。如果這樣請讓我們知道。\n"
+" - KDat 維護團隊\n"
+
+#: KDatMainWindow.cpp:449
+#, c-format
+msgid "Archive created on %1"
+msgstr "歸檔建立時間為 %1"
+
+#: KDatMainWindow.cpp:467
+msgid "Performing backup..."
+msgstr "正在進行備份..."
+
+#: KDatMainWindow.cpp:472 KDatMainWindow.cpp:494
+msgid "Backup canceled."
+msgstr "取消備份。"
+
+#: KDatMainWindow.cpp:486
+msgid ""
+"WARNING: The estimated archive size is %1 KB but the tape has only %2 KB of "
+"space!\n"
+"Back up anyway?"
+msgstr ""
+"警告：歸檔大小估計為 %1 KB，但是磁帶只有 %2 KB 空間！\n"
+"\n"
+"繼續備份嗎？"
+
+#: KDatMainWindow.cpp:501 TapeDrive.cpp:525 TapeDrive.cpp:546
+msgid "Rewinding tape..."
+msgstr "正在倒帶..."
+
+#: KDatMainWindow.cpp:504
+msgid ""
+"Cannot rewind tape.\n"
+"Backup aborted."
+msgstr ""
+"不能倒帶。\n"
+"中止備份。"
+
+#: KDatMainWindow.cpp:505 KDatMainWindow.cpp:516
+msgid "Backup Error"
+msgstr "備份錯誤"
+
+#: KDatMainWindow.cpp:506 KDatMainWindow.cpp:517 KDatMainWindow.cpp:537
+msgid "Backup aborted."
+msgstr "備份中止。"
+
+#: KDatMainWindow.cpp:512
+msgid "Skipping to end of tape..."
+msgstr "正在跳到磁帶尾端..."
+
+#: KDatMainWindow.cpp:515
+msgid ""
+"Cannot get to end of tape.\n"
+"Backup aborted."
+msgstr ""
+"無法跳到磁帶尾端。\n"
+"中止備份。"
+
+#: KDatMainWindow.cpp:521
+msgid "Backup in progress..."
+msgstr "正在備份..."
+
+#: KDatMainWindow.cpp:535
+msgid "Backup complete."
+msgstr "完成備份。"
+
+#: KDatMainWindow.cpp:667
+msgid "Restore in progress..."
+msgstr "正在讀出資料..."
+
+#: KDatMainWindow.cpp:669
+msgid "Verify in progress..."
+msgstr "正在檢驗..."
+
+#: KDatMainWindow.cpp:676
+msgid "Restore complete."
+msgstr "資料讀取完成。"
+
+#: KDatMainWindow.cpp:678
+msgid "Verify complete."
+msgstr "檢驗完成。"
+
+#: KDatMainWindow.cpp:682
+msgid "Restore aborted."
+msgstr "停止讀出資料。"
+
+#: KDatMainWindow.cpp:684
+msgid "Verify aborted."
+msgstr "停止檢驗。"
+
+#: KDatMainWindow.cpp:695 KDatMainWindow.cpp:845
+msgid ""
+"There appears to be no tape in the drive %1. Please\n"
+"check \"Edit->Preferences\" to make sure the\n"
+"correct device is selected as the tape drive (e.g.\n"
+"/dev/st0). If you hear the tape drive moving, wait\n"
+"until it stops and then try mounting it again."
+msgstr ""
+"磁帶機 %1 中沒有磁帶。請檢查設定是否指向正確的磁帶機設備（如 /dev/st0）。如果您有聽到磁帶機在運轉中，請稍候直到運轉停止，並試著重新掛載。"
+
+#: KDatMainWindow.cpp:723
+msgid "The current tape index will be overwritten, continue?"
+msgstr "當前的磁帶索引會被覆蓋，確定要繼續嗎？"
+
+#: KDatMainWindow.cpp:724
+msgid "Index Tape"
+msgstr "索引磁帶"
+
+#: KDatMainWindow.cpp:724
+msgid "Overwrite"
+msgstr "覆蓋"
+
+#: KDatMainWindow.cpp:730 KDatMainWindow.cpp:1235
+#, c-format
+msgid "KDat: %1"
+msgstr "KDat: %1"
+
+#: KDatMainWindow.cpp:734
+msgid "Index complete."
+msgstr "完成索引。"
+
+#: KDatMainWindow.cpp:736
+msgid "Index aborted."
+msgstr "索引被中止。"
+
+#: KDatMainWindow.cpp:745
+msgid ""
+"No archive is selected.\n"
+"In order to delete an archive, the archive to be deleted must be selected in "
+"the tree first."
+msgstr ""
+"沒有選擇歸檔。\n"
+"請在樹狀列表中選擇要刪除的歸檔。"
+
+#: KDatMainWindow.cpp:779
+msgid ""
+"An archive cannot be removed from the middle of the tape. If\n"
+"the archive '%1' is deleted then\n"
+"the following archives will also be deleted:\n"
+"%2\n"
+"\n"
+"Delete all listed archives?"
+msgstr ""
+"不能從磁帶中間刪除一個歸檔。\n"
+"如果歸檔 %1 被刪除，那麼下列的歸檔也會被刪除：\n"
+"%2\n"
+"\n"
+"要刪除列出的歸檔嗎？"
+
+#: KDatMainWindow.cpp:784
+msgid "Archives deleted."
+msgstr "歸檔被刪除。"
+
+#: KDatMainWindow.cpp:793
+msgid "Really delete the archive '%1'?"
+msgstr "確定要刪除歸檔 %1？"
+
+#: KDatMainWindow.cpp:798
+msgid "Archive deleted."
+msgstr "歸檔被刪除。"
+
+#: KDatMainWindow.cpp:811
+msgid ""
+"No tape index is selected.\n"
+"In order to delete a tape index, the tape index to be deleted must be selected "
+"in the tree first."
+msgstr ""
+"沒有選擇磁帶索引。\n"
+"請在樹狀列表中選擇要刪除的磁帶索引。"
+
+#: KDatMainWindow.cpp:820
+msgid ""
+"Tape is still mounted. The index for a mounted tape cannot be deleted.\n"
+"Unmount the tape and try again."
+msgstr ""
+"目前磁帶機掛載中，因此無法刪除其索引。\n"
+"請先卸載磁帶，然後重試。"
+
+#: KDatMainWindow.cpp:827
+msgid "Really delete the index for '%1'?"
+msgstr "確定要刪除 %1 的索引嗎？"
+
+#: KDatMainWindow.cpp:832
+msgid "Tape index deleted."
+msgstr "磁帶索引被刪除。"
+
+#: KDatMainWindow.cpp:858
+msgid ""
+"The tape in the drive is write protected.\n"
+"Please disable write protection and try again."
+msgstr ""
+"磁帶機中的磁帶開啟了防寫保護。\n"
+"請關掉防寫保護，然後重試。"
+
+#: KDatMainWindow.cpp:863
+msgid ""
+"All data currently on the tape will be lost.\n"
+"Are you sure you want to continue?"
+msgstr ""
+"所有在磁帶上的資料都會不見。\n"
+"您確定要繼續嗎？"
+
+#: KDatMainWindow.cpp:865
+msgid "Format Tape"
+msgstr "格式化磁帶"
+
+#: KDatMainWindow.cpp:865 KDatMainWindow.cpp:1006
+msgid "Format"
+msgstr "格式化"
+
+#: KDatMainWindow.cpp:868
+#, c-format
+msgid "Tape created on %1"
+msgstr "磁帶建立的時間是 %1"
+
+#: KDatMainWindow.cpp:884
+msgid "Formatting tape..."
+msgstr "正在格式化磁帶..."
+
+#: KDatMainWindow.cpp:887
+msgid "Format complete."
+msgstr "完成格式化。"
+
+#: KDatMainWindow.cpp:901
+#, c-format
+msgid "Backup Profile %1"
+msgstr "備份設定 %1"
+
+#: KDatMainWindow.cpp:919
+msgid "Archive"
+msgstr "歸檔"
+
+#: KDatMainWindow.cpp:940
+msgid ""
+"In order to delete a backup profile, the backup profile to be deleted must be "
+"selected in the tree first."
+msgstr "請先在樹狀列表中選擇要刪除的備份設定。"
+
+#: KDatMainWindow.cpp:949
+msgid "Really delete backup profile '%1'?"
+msgstr "確定要刪除備份設定 %1？"
+
+#: KDatMainWindow.cpp:954
+msgid "Backup profile deleted."
+msgstr "已刪除備份設定。"
+
+#: KDatMainWindow.cpp:992
+msgid "Tape unmounted."
+msgstr "磁帶已卸載。"
+
+#: KDatMainWindow.cpp:996
+msgid "Reading tape header..."
+msgstr "正在讀取磁帶標頭..."
+
+#: KDatMainWindow.cpp:1003
+msgid "This tape has not been formatted by KDat."
+msgstr "這個磁帶沒有用 KDat 格式化。"
+
+#: KDatMainWindow.cpp:1006
+msgid ""
+"This tape has not been formatted by KDat.\n"
+"\n"
+"Would you like to format it now?"
+msgstr ""
+"這個磁帶沒有用 KDat 格式化。\n"
+"\n"
+"你想現在格式化嗎？"
+
+#: KDatMainWindow.cpp:1006
+msgid "Do Not Format"
+msgstr "不要"
+
+#: KDatMainWindow.cpp:1018
+msgid "Tape mounted."
+msgstr "磁帶已掛載。"
+
+#: KDatMainWindow.cpp:1105
+msgid "Estimating backup size: %1, %2"
+msgstr "正在估計備份的大小： %1，%2"
+
+#: KDatMainWindow.cpp:1240
+msgid "KDat: <no tape >"
+msgstr "KDat：<沒有磁帶>"
+
+#: KDatMainWindow.cpp:1330
+msgid ""
+"Click \"CANCEL\" to stop the backup process.\n"
+"For example, you may quickly see that the size of\n"
+"the files you selected will exceed the size of the\n"
+"backup tape, and may then decide to stop and remove\n"
+"some files from your list of files to backup.\n"
+"\n"
+"Click \"Continue\" to remove this message while\n"
+"continuing the backup."
+msgstr ""
+"按下「取消」停止備份。\n"
+"例如，您可能發現您選擇的檔案大小已超過磁帶機的容量，\n"
+"您可以停止並移除一些檔案。\n"
+"\n"
+"按下「繼續」會繼續備份，並不顯示此訊息。"
+
+#: KDatMainWindow.cpp:1337
+msgid "Stop estimating backup size"
+msgstr "停止估計備份的大小"
+
+#: LoggerWidget.cpp:63
+msgid "Log file exists, overwrite?"
+msgstr "紀錄檔案已存在，覆蓋嗎？"
+
+#: LoggerWidget.cpp:64
+msgid "KDat: Save Log"
+msgstr "KDat：保存紀錄"
+
+#: LoggerWidget.cpp:65
+msgid "&Overwrite"
+msgstr "覆蓋(&O)"
+
+#: Node.cpp:1185 Node.cpp:1255
+msgid "<no tape>"
+msgstr "<沒有磁帶>"
+
+#: Node.cpp:1335
+msgid "Tape Indexes"
+msgstr "磁帶索引"
+
+#: Node.cpp:1470
+msgid "Backup Profiles"
+msgstr "備份設定"
+
+#: Tape.cpp:42
+msgid "New Tape"
+msgstr "新磁帶"
+
+#: Tape.cpp:76 TapeDrive.cpp:226
+msgid "Rewinding tape failed."
+msgstr "無法倒帶。"
+
+#: Tape.cpp:76 Tape.cpp:82 Tape.cpp:91 Tape.cpp:98 Tape.cpp:105 Tape.cpp:109
+msgid "Format Failed"
+msgstr "格式化失敗"
+
+#: Tape.cpp:82
+msgid "Cannot set tape block size."
+msgstr "不能設置磁帶區塊大小。"
+
+#: Tape.cpp:91
+msgid "Writing magic string failed."
+msgstr "無法寫入 magic 字串。"
+
+#: Tape.cpp:98
+msgid "Writing version number failed."
+msgstr "無法寫入版本號。"
+
+#: Tape.cpp:105
+msgid "Writing tape ID length failed."
+msgstr "無法寫入磁帶 ID 長度。"
+
+#: Tape.cpp:109
+msgid "Writing tape ID failed."
+msgstr "無法寫入磁帶 ID。"
+
+#: Tape.cpp:154
+msgid ""
+"No index file was found for this tape.\n"
+"Recreate the index from tape?"
+msgstr ""
+"沒有找到和這個磁帶對應的索引檔案。\n"
+"從磁帶重新建立索引？"
+
+#: Tape.cpp:156 Tape.cpp:220
+msgid "Tape Index"
+msgstr "磁帶索引"
+
+#: Tape.cpp:157
+msgid "Recreate"
+msgstr "重建"
+
+#: Tape.cpp:178 TapeDrive.cpp:246
+msgid "Reading version number failed."
+msgstr "無法讀取版本號。"
+
+#: Tape.cpp:179 Tape.cpp:634 Tape.cpp:640 Tape.cpp:646 Tape.cpp:653
+#: Tape.cpp:660 Tape.cpp:668 Tape.cpp:675 Tape.cpp:683 Tape.cpp:691
+#: Tape.cpp:698 Tape.cpp:705 Tape.cpp:718 Tape.cpp:730 Tape.cpp:738
+#: Tape.cpp:745 Tape.cpp:752 Tape.cpp:781 Tape.cpp:787 Tape.cpp:793
+#: Tape.cpp:800 Tape.cpp:807 Tape.cpp:815 Tape.cpp:822 Tape.cpp:843
+#: Tape.cpp:849 Tape.cpp:886 Tape.cpp:892
+msgid "Index File Error"
+msgstr "索引檔案錯誤"
+
+#: Tape.cpp:219
+#, c-format
+msgid ""
+"The tape index file format is version %d. The index cannot be read by this "
+"version of KDat. Perhaps the tape index file was created by a newer version of "
+"KDat?"
+msgstr "磁帶索引檔案格式版本為 %d。你用的 KDat 不能讀取索引檔案。也許，磁帶索引檔案是用新版本的KDat生成的？"
+
+#: Tape.cpp:380
+msgid "Error during fseek #1 while accessing archive: \""
+msgstr "讀取歸檔時 fseek #1 發生錯誤：\""
+
+#: Tape.cpp:385 Tape.cpp:398 Tape.cpp:411 Tape.cpp:424 Tape.cpp:439
+msgid "File Access Error"
+msgstr "檔案存取錯誤"
+
+#: Tape.cpp:393
+msgid "Error while accessing string #1 in archive: \""
+msgstr "在歸檔中讀取字串 #1 時發生錯誤：\""
+
+#: Tape.cpp:406
+msgid "Error while accessing string #2 in archive: \""
+msgstr "在歸檔中讀取字串 #2 時發生錯誤：\""
+
+#: Tape.cpp:419
+msgid "Error during fseek #2 while accessing archive: \""
+msgstr "存取歸檔時 fseek #2 發生錯誤：\""
+
+#: Tape.cpp:436
+msgid "Error while updating archive name: "
+msgstr "更新歸檔名時發生錯誤："
+
+#: Tape.cpp:634 Tape.cpp:781 Tape.cpp:843 Tape.cpp:886 TapeDrive.cpp:263
+msgid "Reading tape ID failed."
+msgstr "無法讀取磁帶 ID。"
+
+#: Tape.cpp:640 Tape.cpp:787 Tape.cpp:849 Tape.cpp:892
+msgid "Tape ID on tape does not match tape ID in index file."
+msgstr "磁帶 ID 和索引檔案中的磁帶 ID 不匹配。"
+
+#: Tape.cpp:646 Tape.cpp:793
+msgid "Reading creation time failed."
+msgstr "無法讀取建立時間。"
+
+#: Tape.cpp:653 Tape.cpp:800
+msgid "Reading modification time failed."
+msgstr "無法讀取修改時間。"
+
+#: Tape.cpp:660 Tape.cpp:807
+msgid "Reading tape name failed."
+msgstr "無法讀取磁帶名。"
+
+#: Tape.cpp:668 Tape.cpp:815
+msgid "Reading tape size failed."
+msgstr "無法讀取磁帶大小。"
+
+#: Tape.cpp:675 Tape.cpp:822
+msgid "Reading archive count failed."
+msgstr "無法讀取歸檔計數。"
+
+#: Tape.cpp:683
+msgid "Reading archive name failed."
+msgstr "無法讀取歸檔名。"
+
+#: Tape.cpp:691
+msgid "Reading archive time stamp failed."
+msgstr "無法讀取歸檔時間紀錄。"
+
+#: Tape.cpp:698
+msgid "Reading archive start block failed."
+msgstr "無法讀取歸檔開始區塊。"
+
+#: Tape.cpp:705
+msgid "Reading archive end block failed."
+msgstr "無法讀取歸檔結束區塊。"
+
+#: Tape.cpp:718
+msgid "Reading archive file count failed."
+msgstr "無法讀取歸檔檔案計數。"
+
+#: Tape.cpp:730
+msgid "Reading file name failed."
+msgstr "無法讀取檔案名。"
+
+#: Tape.cpp:738
+msgid "Reading file size failed."
+msgstr "無法讀取檔案大小。"
+
+#: Tape.cpp:745
+msgid "Reading file modification time failed."
+msgstr "無法讀取檔案修改時間。"
+
+#: Tape.cpp:752
+msgid "Reading file record number failed."
+msgstr "無法讀取檔案記錄號。"
+
+#: TapeDrive.cpp:192
+msgid "Tape mounted readonly."
+msgstr "磁帶以唯讀方式掛載。"
+
+#: TapeDrive.cpp:194
+msgid "Tape mounted read/write."
+msgstr "磁帶以讀寫方式掛載。"
+
+#: TapeDrive.cpp:231
+msgid "Reading magic string..."
+msgstr "正在讀取 magic 字串..."
+
+#: TapeDrive.cpp:234
+msgid "Reading magic string failed."
+msgstr "無法讀取 magic 字串。"
+
+#: TapeDrive.cpp:243
+msgid "Reading version number..."
+msgstr "正在讀版本號..."
+
+#: TapeDrive.cpp:251
+msgid ""
+"Tape was formatted by a more recent version of KDat. Consider upgrading."
+msgstr "格式化磁帶所用的 KDat 是新版本的。請考慮升級你所用的 KDat。"
+
+#: TapeDrive.cpp:255
+msgid "Reading tape ID..."
+msgstr "讀取磁帶 ID..."
+
+#: TapeDrive.cpp:258
+msgid "Reading tape ID length failed."
+msgstr "無法讀取磁帶 ID 長度。"
+
+#: TapeDrive.cpp:520
+msgid "Skipping to archive..."
+msgstr "跳至歸檔..."
+
+#: TapeDrive.cpp:542
+msgid "Skipping to block..."
+msgstr "跳至區塊..."
+
+#: TapeFileInfoWidget.cpp:39
+msgid "Start record:"
+msgstr "開始記錄："
+
+#: TapeFileInfoWidget.cpp:40
+msgid "End record:"
+msgstr "結束記錄："
+
+#: TapeInfoWidget.cpp:46
+msgid "Tape ID:"
+msgstr "磁帶 ID："
+
+#: TapeInfoWidget.cpp:49
+msgid "Archive count:"
+msgstr "歸檔計數："
+
+#: TapeInfoWidget.cpp:50
+msgid "Space used:"
+msgstr "已使用空間："
+
+#: VerifyDlg.cpp:70 VerifyDlg.cpp:71
+msgid "KDat: Restore"
+msgstr "KDat：讀出資料"
+
+#: VerifyDlg.cpp:73 VerifyDlg.cpp:74
+msgid "KDat: Verify"
+msgstr "KDat：檢驗"
+
+#: VerifyDlg.cpp:126
+msgid "Differences:"
+msgstr "差異："
+
+#: VerifyDlg.cpp:134
+msgid "Restore log:"
+msgstr "重建紀錄："
+
+#: VerifyDlg.cpp:136
+msgid "Verify log:"
+msgstr "檢驗紀錄："
+
+#: VerifyDlg.cpp:144
+msgid "&Save Log..."
+msgstr "保存紀錄 (&S)..."
+
+#: VerifyDlg.cpp:149
+msgid "&Abort"
+msgstr "中斷(&A)"
+
+#: VerifyDlg.cpp:344
+msgid ""
+"failed while reading tape data.\n"
+msgstr ""
+"無法讀取磁帶資料。\n"
+
+#: VerifyOptDlg.cpp:41 VerifyOptDlg.cpp:42
+msgid "KDat: Restore Options"
+msgstr "KDat：資料讀取選項"
+
+#: VerifyOptDlg.cpp:44 VerifyOptDlg.cpp:45
+msgid "KDat: Verify Options"
+msgstr "KDat：檢驗選項"
+
+#: VerifyOptDlg.cpp:50
+msgid "Restore to folder:"
+msgstr "資料讀出到目錄："
+
+#: VerifyOptDlg.cpp:52
+msgid "Verify in folder:"
+msgstr "檢驗目錄："
+
+#. i18n: file OptionsDlgWidget.ui line 136
+#: VerifyOptDlg.cpp:60 rc.cpp:30 rc.cpp:42
+#, no-c-format
+msgid "..."
+msgstr "..."
+
+#: VerifyOptDlg.cpp:65
+msgid "Restore files:"
+msgstr "讀出檔案："
+
+#: VerifyOptDlg.cpp:67
+msgid "Verify files:"
+msgstr "檢驗檔案："
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Franklin"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: main.cpp:41
+msgid "tar-based DAT archiver for KDE"
+msgstr "以 tar 為基礎的 KDE 磁帶工具"
+
+#: main.cpp:48
+msgid "KDat"
+msgstr "KDat"
+
+#: main.cpp:59
+msgid "Can't allocate memory in kdat"
+msgstr "KDat 無法配置記憶體"
+
+#. i18n: file OptionsDlgWidget.ui line 17
+#: rc.cpp:3
+#, no-c-format
+msgid "Options Widget"
+msgstr "選項"
+
+#. i18n: file OptionsDlgWidget.ui line 53
+#: rc.cpp:6
+#, no-c-format
+msgid ""
+"This setting determines the capacity that KDat assumes your backup tapes to be. "
+" This is used when formatting the tapes."
+msgstr "這個設定是讓 KDat 猜測您的備份磁帶容量。用於格式化磁帶時。"
+
+#. i18n: file OptionsDlgWidget.ui line 67
+#: rc.cpp:9
+#, no-c-format
+msgid ""
+"Tape drives read and write data in individual blocks.  This setting controls "
+"the size of each block, and should be set to your tape drive's block size.  For "
+"floppy tape drives this should be set to <b>10240</b> bytes."
+msgstr ""
+"磁帶機於個別的區塊讀寫資料。這個設定控制區塊大小，應該與您的磁帶機的區塊大小一致。Floppy 磁帶機應該設定為 <b>10240</b> bytes。"
+
+#. i18n: file OptionsDlgWidget.ui line 73
+#: rc.cpp:12
+#, no-c-format
+msgid "MB"
+msgstr "MB"
+
+#. i18n: file OptionsDlgWidget.ui line 78
+#: rc.cpp:15
+#, no-c-format
+msgid "GB"
+msgstr "GB"
+
+#. i18n: file OptionsDlgWidget.ui line 88
+#: rc.cpp:18
+#, no-c-format
+msgid ""
+"This option chooses whether the default tape size to the left is in megabytes "
+"(MB) or gigabytes (GB)."
+msgstr "這個選項設定磁帶大小是以 MB 或 GB 為單位。"
+
+#. i18n: file OptionsDlgWidget.ui line 96
+#: rc.cpp:21
+#, no-c-format
+msgid "bytes"
+msgstr "位元組"
+
+#. i18n: file OptionsDlgWidget.ui line 104
+#: rc.cpp:24
+#, no-c-format
+msgid "Tape block size:"
+msgstr "磁帶區塊大小："
+
+#. i18n: file OptionsDlgWidget.ui line 115
+#: rc.cpp:27
+#, no-c-format
+msgid "Default tape size:"
+msgstr "預設磁帶大小："
+
+#. i18n: file OptionsDlgWidget.ui line 139
+#: rc.cpp:33
+#, no-c-format
+msgid "Browse for the tar command."
+msgstr "瀏覽 tar 命令。"
+
+#. i18n: file OptionsDlgWidget.ui line 147
+#: rc.cpp:36
+#, no-c-format
+msgid ""
+"The location in the filesystem of the <em>non-rewinding</em> "
+"tape device.  The default is <b>/dev/tape</b>."
+msgstr "<em>不迴帶設備名稱</em>在檔案系統中的位置。預設為<b>/dev/type</b>。"
+
+#. i18n: file OptionsDlgWidget.ui line 155
+#: rc.cpp:39
+#, no-c-format
+msgid "Tar command:"
+msgstr "Tar 命令："
+
+#. i18n: file OptionsDlgWidget.ui line 169
+#: rc.cpp:45
+#, no-c-format
+msgid "Browse for the tape device."
+msgstr "瀏覽磁帶設備。"
+
+#. i18n: file OptionsDlgWidget.ui line 177
+#: rc.cpp:48
+#, no-c-format
+msgid ""
+"This setting controls the command that KDat uses to perform the tape backup.  "
+"The full path should be given.  The default is <b>tar</b>."
+msgstr "這個設定控制 KDat 用於進行磁帶備份的命令。您應該用完整的路徑名稱。預設值為 <b>tar</b>。"
+
+#. i18n: file OptionsDlgWidget.ui line 185
+#: rc.cpp:51
+#, no-c-format
+msgid "Tape device:"
+msgstr "磁帶設備："
+
+#. i18n: file OptionsDlgWidget.ui line 198
+#: rc.cpp:54
+#, no-c-format
+msgid "Tape Drive Options"
+msgstr "磁帶機選項"
+
+#. i18n: file OptionsDlgWidget.ui line 209
+#: rc.cpp:57
+#, no-c-format
+msgid "Load tape on mount"
+msgstr "掛載磁帶時先載入"
+
+#. i18n: file OptionsDlgWidget.ui line 212
+#: rc.cpp:60
+#, no-c-format
+msgid "<qt>Issue an <tt>mtload</tt> command prior to mounting the tape.</qt>"
+msgstr "<qt>掛載磁帶前使用 <tt>mtload</tt> 命令。</qt>"
+
+#. i18n: file OptionsDlgWidget.ui line 217
+#: rc.cpp:63
+#, no-c-format
+msgid ""
+"This command issues an <tt>mtload</tt> command to the tape device before trying "
+"to mount it.\n"
+"\n"
+"This is required by some tape drives."
+msgstr ""
+"這個命令會在掛載前先對磁帶機執行 <tt>mtload</tt> 命令。\n"
+"\n"
+"某些磁帶機會需要這樣做。"
+
+#. i18n: file OptionsDlgWidget.ui line 225
+#: rc.cpp:68
+#, no-c-format
+msgid "Lock tape drive on mount"
+msgstr "掛載磁帶時鎖住磁帶"
+
+#. i18n: file OptionsDlgWidget.ui line 228
+#: rc.cpp:71
+#, no-c-format
+msgid "Disable the eject button after mounting the tape."
+msgstr "掛載磁帶後就無法使用跳出(eject)鍵。"
+
+#. i18n: file OptionsDlgWidget.ui line 233
+#: rc.cpp:74
+#, no-c-format
+msgid ""
+"This option makes KDat try to disable the eject button on the tape drive after "
+"the tape has been mounted.\n"
+"\n"
+"This doesn't work for all tape drives."
+msgstr ""
+"這個選項讓 KDat 在掛載磁帶後，會關掉跳出鍵 (eject)。\n"
+"\n"
+"這個選項不一定適用於所有的磁帶機。"
+
+#. i18n: file OptionsDlgWidget.ui line 241
+#: rc.cpp:79
+#, no-c-format
+msgid "Eject tape on unmount"
+msgstr "卸載磁帶時彈出磁帶"
+
+#. i18n: file OptionsDlgWidget.ui line 244
+#: rc.cpp:82
+#, no-c-format
+msgid "Try to eject the tape after it is unmounted.  Don't use this for ftape."
+msgstr "在卸載磁帶後直接跳出磁帶。不要對 floppy 磁帶機使用這個選項。"
+
+#. i18n: file OptionsDlgWidget.ui line 249
+#: rc.cpp:85
+#, no-c-format
+msgid ""
+"Try to eject the tape after it has been unmounted.\n"
+"\n"
+"This option should not be used for floppy-tape drives."
+msgstr ""
+"試圖在卸載磁帶後跳出磁帶。\n"
+"\n"
+"這個選項不應該用於 floppy 磁帶機。"
+
+#. i18n: file OptionsDlgWidget.ui line 257
+#: rc.cpp:90
+#, no-c-format
+msgid "Variable block size"
+msgstr "可變區塊大小"
+
+#. i18n: file OptionsDlgWidget.ui line 260
+#: rc.cpp:93
+#, no-c-format
+msgid "Enable variable-block size support in the tape drive."
+msgstr "開啟磁帶機支援可變區塊大小。"
+
+#. i18n: file OptionsDlgWidget.ui line 265
+#: rc.cpp:96
+#, no-c-format
+msgid ""
+"Some tape drives support different sizes of the data block.  With this option, "
+"KDat will attempt to enable that support.\n"
+"\n"
+"You must still specify the block size."
+msgstr ""
+"有些磁帶機支援可變資料區塊。這個選項會讓 KDat 試著開啟此支援。\n"
+"\n"
+"您還是必須指定區塊大小。"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kfile_deb.po b/tde-i18n-zh_TW/messages/kdeadmin/kfile_deb.po
new file mode 100644
index 00000000000..db7c17603d7
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kfile_deb.po
@@ -0,0 +1,35 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# Keanu <keanu@ms50.url.com.tw>, 2002.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kfile_deb.po\n"
+"POT-Creation-Date: 2004-10-12 01:17+0200\n"
+"PO-Revision-Date: 2002-06-27 10:17\n"
+"Last-Translator: Keanu <keanu@ms50.url.com.tw>\n"
+"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 0.9.5\n"
+
+#: kfile_deb.cpp:53
+msgid "General"
+msgstr "一般"
+
+#: kfile_deb.cpp:56
+msgid "Name"
+msgstr "名稱"
+
+#: kfile_deb.cpp:57
+msgid "Version"
+msgstr "版本"
+
+#: kfile_deb.cpp:58
+msgid "Summary"
+msgstr "摘要"
+
+#: kfile_deb.cpp:59
+msgid "Size"
+msgstr "大小"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kfile_rpm.po b/tde-i18n-zh_TW/messages/kdeadmin/kfile_rpm.po
new file mode 100644
index 00000000000..a3f501ab799
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kfile_rpm.po
@@ -0,0 +1,65 @@
+# translation of kfile_rpm.po to Traditional Chinese
+# Copyright (C) 2002, 2005 Free Software Foundation, Inc.
+# Keanu <keanu@ms50.url.com.tw>, 2002.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kfile_rpm\n"
+"POT-Creation-Date: 2004-10-12 01:17+0200\n"
+"PO-Revision-Date: 2005-12-15 15:38+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: kfile_rpm.cpp:46
+msgid "General"
+msgstr "一般"
+
+#: kfile_rpm.cpp:49
+msgid "Name"
+msgstr "名稱"
+
+#: kfile_rpm.cpp:50
+msgid "Version"
+msgstr "版本"
+
+#: kfile_rpm.cpp:51
+msgid "Release"
+msgstr "釋出"
+
+#: kfile_rpm.cpp:52
+msgid "Summary"
+msgstr "摘要"
+
+#: kfile_rpm.cpp:54
+msgid "Group"
+msgstr "群組"
+
+#: kfile_rpm.cpp:55
+msgid "Size"
+msgstr "大小"
+
+#: kfile_rpm.cpp:57
+msgid "Vendor"
+msgstr "製造商"
+
+#: kfile_rpm.cpp:58
+msgid "Packager"
+msgstr "包裝商"
+
+#: kfile_rpm.cpp:59
+msgid "Archive Offset"
+msgstr "Archive 位移值"
+
+#: kfile_rpm.cpp:60
+msgid "Comment"
+msgstr "註解"
+
+#: kfile_rpm.cpp:63
+msgid "All tags"
+msgstr "所有標記"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/knetworkconf.po b/tde-i18n-zh_TW/messages/kdeadmin/knetworkconf.po
new file mode 100644
index 00000000000..23ee89f6b8c
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/knetworkconf.po
@@ -0,0 +1,1028 @@
+# translation of knetworkconf.po to Chinese Traditional
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+# Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: knetworkconf\n"
+"POT-Creation-Date: 2008-07-08 01:20+0200\n"
+"PO-Revision-Date: 2006-06-19 09:12+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>\n"
+"Language-Team: Chinese Traditional <zh@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: kadddevicecontainer.cpp:129 kadddnsserverdlg.ui.h:42
+#: kaddknownhostdlg.ui.h:25
+msgid "The format of the specified IP address is not valid."
+msgstr "指定的 IP 位址格式不正確。"
+
+#: kadddevicecontainer.cpp:129 kadddevicecontainer.cpp:132
+#: kadddevicecontainer.cpp:135 kadddevicecontainer.cpp:138
+#: kadddnsserverdlg.ui.h:42 kaddknownhostdlg.ui.h:25 knetworkconf.cpp:589
+msgid "Invalid IP Address"
+msgstr "不正確的 IP 位址"
+
+#: kadddnsserverdlg.ui.h:54
+msgid "You have to type an alias first."
+msgstr "您必須先輸入一個別名。"
+
+#: kadddnsserverdlg.ui.h:54
+msgid "Invalid Text"
+msgstr "不合法的文字"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: kaddknownhostdlg.ui.h:29
+msgid "You must add at least one alias for the specified IP address."
+msgstr "您必須為這個 IP 位址至少指定一個別名。"
+
+#: kaddknownhostdlg.ui.h:29
+msgid "Insufficient Aliases"
+msgstr "不適當的別名"
+
+#: kaddknownhostdlg.ui.h:63
+msgid "Edit Alias"
+msgstr "編輯別名"
+
+#: kaddknownhostdlg.ui.h:64 kaddknownhostdlg.ui.h:92
+msgid "Alias:"
+msgstr "別名："
+
+#: kaddknownhostdlg.ui.h:91
+msgid "Add New Alias"
+msgstr "新增別名"
+
+#: knetworkconf.cpp:66
+msgid "Could not load network configuration information."
+msgstr "無法載入網路設定資訊。"
+
+#: knetworkconf.cpp:67
+msgid "Error Reading Configuration File"
+msgstr "讀取設定檔時發生錯誤。"
+
+#: knetworkconf.cpp:118 knetworkconf.cpp:755
+msgid "Enabled"
+msgstr "開啟"
+
+#: knetworkconf.cpp:128 knetworkconf.cpp:769
+msgid "Disabled"
+msgstr "關閉"
+
+#: knetworkconf.cpp:137 knetworkconf.cpp:304
+msgid "Manual"
+msgstr "手動"
+
+#: knetworkconf.cpp:158
+msgid ""
+"The new configuration has not been saved.\n"
+"Do you want to apply changes before quitting?"
+msgstr ""
+"新的設定尚未儲存。\n"
+"您要在離開前先套用新設定嗎？"
+
+#: knetworkconf.cpp:159 knetworkconf.cpp:830 knetworkconf.cpp:849
+msgid "New Configuration Not Saved"
+msgstr "不要儲存"
+
+#: knetworkconf.cpp:206
+msgid "Edit Server"
+msgstr "編輯伺服器"
+
+#: knetworkconf.cpp:233
+#, c-format
+msgid "Configure Device %1"
+msgstr "設定設備 %1"
+
+#: knetworkconf.cpp:442
+msgid "Could not open file '/etc/resolv.conf' for reading."
+msgstr "無法開啟 /etc/resolv.conf。"
+
+#: knetworkconf.cpp:443
+msgid "Error Loading Config Files"
+msgstr "載入設定檔時發生錯誤"
+
+#: knetworkconf.cpp:589
+msgid "The default Gateway IP address is invalid."
+msgstr "預設的閘道 IP 位址不正確。"
+
+#: knetworkconf.cpp:680
+msgid "Enabling interface <b>%1</b>"
+msgstr "開啟介面 <b>%1</b>"
+
+#: knetworkconf.cpp:682
+msgid "Disabling interface <b>%1</b>"
+msgstr "關閉介面 <b>%1</b>"
+
+#: knetworkconf.cpp:716
+msgid ""
+"Could not launch backend to change network device state. You will have to do it "
+"manually."
+msgstr "無法叫出後端來更新網路設備的狀態。您必須手動執行。"
+
+#: knetworkconf.cpp:737
+msgid ""
+"There was an error changing the device's state. You will have to do it "
+"manually."
+msgstr "更改設備狀態時發生錯誤。您必須手動執行。"
+
+#: knetworkconf.cpp:738
+msgid "Could Not Change Device State"
+msgstr "無法更改設備狀態"
+
+#: knetworkconf.cpp:829 knetworkconf.cpp:848
+msgid ""
+"The new configuration has not been saved.\n"
+"Apply changes?"
+msgstr ""
+"新的設定尚未儲存。\n"
+"您要套用新設定嗎？"
+
+#. i18n: file kaddknownhostdlg.ui line 16
+#: knetworkconf.cpp:866 rc.cpp:199
+#, no-c-format
+msgid "Add New Static Host"
+msgstr "新增靜態主機"
+
+#: knetworkconf.cpp:899
+msgid "Edit Static Host"
+msgstr "編輯靜態主機"
+
+#: knetworkconf.cpp:1034
+msgid "Could not load the selected Network Profile."
+msgstr "無法載入選擇的網路設定檔。"
+
+#: knetworkconf.cpp:1035
+msgid "Error Reading Profile"
+msgstr "讀取設定檔時發生錯誤。"
+
+#: knetworkconf.cpp:1058
+msgid "Create New Network Profile"
+msgstr "建立新的網路設定檔"
+
+#: knetworkconf.cpp:1059
+msgid "Name of new profile:"
+msgstr "新的網路設定檔名稱："
+
+#: knetworkconf.cpp:1088
+msgid "There is already another profile with that name."
+msgstr "已經有一個相同名稱的設定檔了。"
+
+#: kadddevicecontainer.cpp:53
+msgid "&Advanced Settings"
+msgstr "進階設定(&A)"
+
+#: kadddevicecontainer.cpp:54 kadddevicecontainer.cpp:55
+msgid "Toggle between advanced and basic settings"
+msgstr "切換基本或進階設定"
+
+#: kadddevicecontainer.cpp:57
+msgid "Apply changes"
+msgstr "套用變更"
+
+#: kadddevicecontainer.cpp:59
+msgid "Forget changes"
+msgstr "丟棄變更"
+
+#: kadddevicecontainer.cpp:132
+msgid "The format of the specified netmask is not valid."
+msgstr "網路遮罩格式不正確。"
+
+#: kadddevicecontainer.cpp:135
+msgid "The format of the specified broadcast is not valid."
+msgstr "網路廣播位址格式不正確。"
+
+#: kadddevicecontainer.cpp:138
+msgid "The format of the specified Gateway is not valid."
+msgstr "閘道位址格式不正確。"
+
+#: kadddevicecontainer.cpp:174
+msgid "Basic Settings"
+msgstr "基本設定"
+
+#: kadddevicecontainer.cpp:179
+msgid "Advanced Settings"
+msgstr "進階設定"
+
+#: kprofileslistviewtooltip.h:84
+msgid "<b>Network Configuration of this Profile:</b>"
+msgstr "<b>此設定檔的網路設定：</b>"
+
+#: kprofileslistviewtooltip.h:94
+#, c-format
+msgid "<p><b>Interface:</b> %1"
+msgstr "<p><b>介面：</b> %1"
+
+#: kprofileslistviewtooltip.h:95
+#, c-format
+msgid "<br><b>Type:</b> %1"
+msgstr "<br><b>型態：</b> %1"
+
+#: kprofileslistviewtooltip.h:101
+#, c-format
+msgid "<br><b>Boot Protocol:</b> %1"
+msgstr "<br><b>開機協定：</b> %1"
+
+#: kprofileslistviewtooltip.h:104
+#, c-format
+msgid "<br><b>IP Address:</b>   %1"
+msgstr "<br><b>IP 位址：</b>   %1"
+
+#: kprofileslistviewtooltip.h:105
+#, c-format
+msgid "<br><b>Broadcast Address:</b> %1"
+msgstr "<br><b>廣播位址：</b> %1"
+
+#: kprofileslistviewtooltip.h:107
+#, c-format
+msgid "<br><b>On Boot:</b> %1"
+msgstr "<br><b>開機時啟動：</b> %1"
+
+#: kprofileslistviewtooltip.h:111
+#, c-format
+msgid "</p><p><b>Default Gateway:</b>   %1"
+msgstr "</p><p><b>預設閘道：</b>   %1"
+
+#: kprofileslistviewtooltip.h:113
+#, c-format
+msgid "<br><b>Domain Name:</b> %1"
+msgstr "<br><b>網域名稱：</b> %1"
+
+#: kprofileslistviewtooltip.h:114
+#, c-format
+msgid "<br><b>Machine Name:</b> %1"
+msgstr "<br><b>機器名稱：</b> %1"
+
+#: kprofileslistviewtooltip.h:118
+#, c-format
+msgid "<br><b>DNS Name Server:</b> %1"
+msgstr "<br><b>DNS 名稱伺服器：</b> %1"
+
+#. i18n: file kadddevicedlg.ui line 44
+#: rc.cpp:3
+#, no-c-format
+msgid "Configure Interface"
+msgstr "設定介面"
+
+#. i18n: file kadddevicedlg.ui line 64
+#: rc.cpp:6
+#, no-c-format
+msgid "TCP/IP Address"
+msgstr "TCP/IP 位址"
+
+#. i18n: file kadddevicedlg.ui line 93
+#: rc.cpp:9
+#, no-c-format
+msgid "dhcp"
+msgstr "DHCP"
+
+#. i18n: file kadddevicedlg.ui line 98
+#: rc.cpp:12
+#, no-c-format
+msgid "bootp"
+msgstr "BOOTP"
+
+#. i18n: file kadddevicedlg.ui line 105
+#: rc.cpp:15 rc.cpp:18
+#, no-c-format
+msgid "The boot protocol this network device should use"
+msgstr "這個網路設備使用的開機協定"
+
+#. i18n: file kadddevicedlg.ui line 133
+#: rc.cpp:21
+#, no-c-format
+msgid "Manual:"
+msgstr "手動："
+
+#. i18n: file kadddevicedlg.ui line 136
+#: rc.cpp:24
+#, no-c-format
+msgid "Use a static IP address. Use the fields below to enter the values"
+msgstr "使用靜態 IP 位址。請在下面的欄位輸入資料"
+
+#. i18n: file kadddevicedlg.ui line 140
+#: rc.cpp:27
+#, no-c-format
+msgid ""
+"<p>Sets this interface to use static IP settings.</p>\n"
+"<p>In this case, please use the fields below to enter the desired values "
+"manually.</p>"
+msgstr ""
+"<p>設定這個介面使用靜態 IP。</p>\n"
+"<p>請在下面的欄位中輸入相關的資料。</p>"
+
+#. i18n: file kadddevicedlg.ui line 148
+#: rc.cpp:31
+#, no-c-format
+msgid "Automatic:"
+msgstr "自動："
+
+#. i18n: file kadddevicedlg.ui line 151
+#: rc.cpp:34
+#, no-c-format
+msgid "Use a dynamic IP address"
+msgstr "使用動態 IP 位址"
+
+#. i18n: file kadddevicedlg.ui line 156
+#: rc.cpp:37
+#, no-c-format
+msgid ""
+"<p>Using an dynamic IP address causes this device to get a free IP address "
+"automatically.</p>\n"
+"<p>The interface will try to contact an DHCP- or BOOTP-Server during the boot "
+"process.</p>\n"
+"<p>Rendevouz is not supported yet.</p>"
+msgstr ""
+"<p>使用動態 IP 位址，網路設備會自動取得 IP 位址。</p>\n"
+"<p>此介面會在開機時試著去尋找 DHCP 或 BOOTP 伺服器。</p> "
+"<p>Rendevouz 尚未支援。</p>"
+
+#. i18n: file kadddevicedlg.ui line 184
+#: rc.cpp:42
+#, no-c-format
+msgid "Activate when the computer starts"
+msgstr "於電腦開機時啟動"
+
+#. i18n: file kadddevicedlg.ui line 187
+#: rc.cpp:45
+#, no-c-format
+msgid "Ensures that this interface gets activated during boot time"
+msgstr "確保在開機期間此介面已經被開啟。"
+
+#. i18n: file kadddevicedlg.ui line 191
+#: rc.cpp:48
+#, no-c-format
+msgid ""
+"<p>Ensures that this interface gets activated during boot time.</p>\n"
+"<p>Otherwise, you will have to active the interface manually after you have "
+"logged in after the boot process.</p>"
+msgstr "<p>確保在開機期間此介面已經被開啟。</p> <p>不然您就必須在開完機後登入系統，再手動啟動介面。</p>"
+
+#. i18n: file kadddevicedlg.ui line 197
+#: rc.cpp:52
+#, no-c-format
+msgid "255.255.255.0"
+msgstr "255.255.255.0"
+
+#. i18n: file kadddevicedlg.ui line 202
+#: rc.cpp:55
+#, no-c-format
+msgid "255.255.0.0"
+msgstr "255.255.0.0"
+
+#. i18n: file kadddevicedlg.ui line 207
+#: rc.cpp:58
+#, no-c-format
+msgid "255.0.0.0"
+msgstr "255.0.0.0"
+
+#. i18n: file kadddevicedlg.ui line 212
+#: rc.cpp:61
+#, no-c-format
+msgid "255.255.255.128"
+msgstr "255.255.255.128"
+
+#. i18n: file kadddevicedlg.ui line 217
+#: rc.cpp:64
+#, no-c-format
+msgid "255.255.255.192"
+msgstr "255.255.255.192"
+
+#. i18n: file kadddevicedlg.ui line 222
+#: rc.cpp:67
+#, no-c-format
+msgid "255.255.255.240"
+msgstr "255.255.255.240"
+
+#. i18n: file kadddevicedlg.ui line 227
+#: rc.cpp:70
+#, no-c-format
+msgid "255.255.255.248"
+msgstr "255.255.255.248"
+
+#. i18n: file kadddevicedlg.ui line 237
+#: rc.cpp:73
+#, no-c-format
+msgid "Subnetmask of the network device"
+msgstr "此網路設備的子網路遮罩："
+
+#. i18n: file kadddevicedlg.ui line 242
+#: rc.cpp:76
+#, no-c-format
+msgid ""
+"<p>Please enter the desired subnetmask for the interface here.</p>\n"
+"<p>For small private networks, 255.255.255.0 will most often be a reasonable "
+"default value.</p>\n"
+"<p>This field will change from a popup box to a combo box as soon as you enable "
+"the advanced settings below.</p>"
+msgstr ""
+"<p>請輸入此介面的子網路遮罩。</p>\n"
+"<p>對某些小的私密網路而言，255.255.255.0 通常是合理的預設值。</p>\n"
+"<p>若您開啟進階設定的話，此欄位會有個選單可以選擇。</p>"
+
+#. i18n: file kadddevicedlg.ui line 284
+#: rc.cpp:81
+#, no-c-format
+msgid "Netmask:"
+msgstr "網路遮罩："
+
+#. i18n: file kadddevicedlg.ui line 287
+#: rc.cpp:84 rc.cpp:87
+#, no-c-format
+msgid ""
+"The netmask defines a range of IP numbers which will build a subnet inside the "
+"network."
+msgstr "網路遮罩定義子網路內可用的 IP 範圍。"
+
+#. i18n: file kadddevicedlg.ui line 301
+#: rc.cpp:90
+#, no-c-format
+msgid "IP address for the network device"
+msgstr "此網路設備的 IP 位址"
+
+#. i18n: file kadddevicedlg.ui line 311
+#: rc.cpp:93
+#, no-c-format
+msgid ""
+"<p>Here you should enter the IP address for the network interface.</p>\n"
+"<p>Please note: If your network is connected to the internet, you should only "
+"enter IP addresses you have been given by your provider.</p>\n"
+"<p>Otherwise, you should enter one of the IP addresses which are explicitly "
+"reserved for private use.</p>\n"
+"<p>Most small private networks use class C networks, which allow up to 255 "
+"computers in your network. So simply use addresses like 192.168.1.1, "
+"192.168.1.2, 192.168.1.171 and so on for your computers.</p>\n"
+"<p>Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13.</p>"
+"\n"
+"<p>Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5</p>\n"
+"<p>Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14</p>\n"
+"<p>Please ensure that all IP addresses you give to your computers are unique; "
+"you will have many problems if the same address is assigned to more than one "
+"network device.</p>"
+msgstr ""
+"<p>請在此輸入網路介面的 IP 位址。</p>\n"
+"<p>請注意：如果您是連接到網際網路上，您應該輸入您的網路服務提供者給您的 IP 位址。</p>\n"
+"<p>否則，您應該輸入私密網路的位址。</p>\n"
+"<p>大部份小的私密網路使用的是 C class 的網路，允許 255 台電腦在同一個網域內。</p> "
+"<p>C class 網路：192.168.0.0 到 192.168.255.255，例如 192.168.0.13。</p>\n"
+"<p>B class 網路：172.16.0.0 到 172.31.255.255，例如 172.28.2.5。</p>\n"
+"<p>A class 網路：10.0.0.0 到 10.255.255.255，例如 10.5.12.14。</p>\n"
+"<p>請確定您設定的 IP 位址不會跟別人衝突，否則您會遇到一大堆的麻煩。</p>"
+
+#. i18n: file kadddevicedlg.ui line 336
+#: rc.cpp:103 rc.cpp:184 rc.cpp:202 rc.cpp:286
+#, no-c-format
+msgid "IP address:"
+msgstr "IP 位址："
+
+#. i18n: file kadddevicedlg.ui line 339
+#: rc.cpp:106 rc.cpp:109 rc.cpp:142 rc.cpp:145
+#, no-c-format
+msgid ""
+"An IP address is an unique identifier of a networking device in an TCP/IP "
+"network"
+msgstr "IP 位址是在 TCP/IP 網路上用於辨識網路設備的代碼。"
+
+#. i18n: file kadddevicedlgextension.ui line 16
+#: rc.cpp:112
+#, no-c-format
+msgid "Advanced Options"
+msgstr "進階選項"
+
+#. i18n: file kadddevicedlgextension.ui line 27
+#: rc.cpp:115
+#, no-c-format
+msgid "Advanced Device Information"
+msgstr "進階設備資訊"
+
+#. i18n: file kadddevicedlgextension.ui line 30
+#: rc.cpp:118
+#, no-c-format
+msgid "Set advanced setting for the network device"
+msgstr "設定網路設備的進階設定"
+
+#. i18n: file kadddevicedlgextension.ui line 41
+#: rc.cpp:121
+#, no-c-format
+msgid "Description:"
+msgstr "描述："
+
+#. i18n: file kadddevicedlgextension.ui line 44
+#: rc.cpp:124 rc.cpp:133
+#, no-c-format
+msgid "IP address of the network device"
+msgstr "網路設備的 IP 位址"
+
+#. i18n: file kadddevicedlgextension.ui line 55
+#: rc.cpp:127 rc.cpp:130
+#, no-c-format
+msgid "Simply enter a short human-readable description for this device"
+msgstr "請簡短輸入此設備的描述"
+
+#. i18n: file kadddevicedlgextension.ui line 72
+#: rc.cpp:136
+#, no-c-format
+msgid ""
+"The Broadcast is a special address. All devices of a network respond if "
+"packages are sent to this address."
+msgstr "廣播位址是一個特殊位址，丟到此位址的封包，所有在此網路的設備都會收到。"
+
+#. i18n: file kadddevicedlgextension.ui line 80
+#: rc.cpp:139
+#, no-c-format
+msgid "Gateway:"
+msgstr "閘道位址："
+
+#. i18n: file kadddevicedlgextension.ui line 100
+#: rc.cpp:148
+#, no-c-format
+msgid "Default gateway for the network device"
+msgstr "網路設備的預設閘道位址"
+
+#. i18n: file kadddevicedlgextension.ui line 103
+#: rc.cpp:151
+#, no-c-format
+msgid ""
+"<p>Here you should enter the default gateway for the network device.</p>"
+msgstr "<p>您應該輸入網路設備的預設閘道位址。</p>"
+
+#. i18n: file kadddevicedlgextension.ui line 111
+#: rc.cpp:154
+#, no-c-format
+msgid "Broadcast:"
+msgstr "廣播："
+
+#. i18n: file kadddevicewifiext.ui line 18
+#: rc.cpp:157 rc.cpp:160
+#, no-c-format
+msgid "Wireless Settings"
+msgstr "無線設定"
+
+#. i18n: file kadddevicewifiext.ui line 43
+#: rc.cpp:163
+#, no-c-format
+msgid "WEP key:"
+msgstr "WEP 鍵值："
+
+#. i18n: file kadddevicewifiext.ui line 61
+#: rc.cpp:166
+#, no-c-format
+msgid "ESSID:"
+msgstr "ESSID："
+
+#. i18n: file kadddevicewifiext.ui line 69
+#: rc.cpp:169
+#, no-c-format
+msgid "Key type:"
+msgstr "鍵值型態："
+
+#. i18n: file kadddevicewifiext.ui line 75
+#: rc.cpp:172
+#, no-c-format
+msgid "ASCII"
+msgstr "ASCII"
+
+#. i18n: file kadddevicewifiext.ui line 80
+#: rc.cpp:175
+#, no-c-format
+msgid "Hexadecimal"
+msgstr "十六進位碼"
+
+#. i18n: file kadddnsserverdlg.ui line 28
+#: rc.cpp:178
+#, no-c-format
+msgid "Add New DNS Server"
+msgstr "新增 DNS 伺服器"
+
+#. i18n: file kadddnsserverdlg.ui line 59
+#: rc.cpp:181
+#, no-c-format
+msgid "IP address of the new DNS server"
+msgstr "新的 DNS 伺服器的 IP 位址"
+
+#. i18n: file kadddnsserverdlg.ui line 92
+#: rc.cpp:187
+#, no-c-format
+msgid "&Add"
+msgstr "新增(&A)"
+
+#. i18n: file kadddnsserverdlg.ui line 95
+#: rc.cpp:190
+#, no-c-format
+msgid "Add the server to the list"
+msgstr "新增伺服器到清單中"
+
+#. i18n: file kadddnsserverdlg.ui line 106
+#: rc.cpp:196
+#, no-c-format
+msgid "Forget it"
+msgstr "丟棄"
+
+#. i18n: file kaddknownhostdlg.ui line 154
+#: rc.cpp:211 rc.cpp:325
+#, no-c-format
+msgid "Aliases"
+msgstr "別名"
+
+#. i18n: file kaddknownhostdlg.ui line 184
+#: rc.cpp:214 rc.cpp:310 rc.cpp:328
+#, no-c-format
+msgid "&Add..."
+msgstr "新增(&A)..."
+
+#. i18n: file kaddknownhostdlg.ui line 201
+#: rc.cpp:217 rc.cpp:313 rc.cpp:331
+#, no-c-format
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#. i18n: file kdetectdistrodlg.ui line 16
+#: rc.cpp:223
+#, no-c-format
+msgid "Detecting Your Current Platform"
+msgstr "偵測您目前的平台"
+
+#. i18n: file kdetectdistrodlg.ui line 60
+#: rc.cpp:226
+#, no-c-format
+msgid "Please wait while detecting your current platform..."
+msgstr "請稍候，正在偵測您目前的平台..."
+
+#. i18n: file kinterfaceupdowndlg.ui line 16
+#: rc.cpp:229
+#, no-c-format
+msgid "Changing Interface State"
+msgstr "更改介面狀態"
+
+#. i18n: file kinterfaceupdowndlg.ui line 64
+#: rc.cpp:232
+#, no-c-format
+msgid "Bringing up interface <b>eth0</b>..."
+msgstr "帶起介面<b>eth0</b>..."
+
+#. i18n: file knetworkconfdlg.ui line 36
+#: rc.cpp:235
+#, no-c-format
+msgid "Network Settings"
+msgstr "網路設定"
+
+#. i18n: file knetworkconfdlg.ui line 42
+#: rc.cpp:238
+#, no-c-format
+msgid "Configure your TCP/IP settings"
+msgstr "設定您的 TCP/IP"
+
+#. i18n: file knetworkconfdlg.ui line 45
+#: rc.cpp:241
+#, no-c-format
+msgid "Change TCP/IP settings"
+msgstr "變更 TCP/IP 設定"
+
+#. i18n: file knetworkconfdlg.ui line 66
+#: rc.cpp:244
+#, no-c-format
+msgid "Network Interfaces"
+msgstr "網路介面"
+
+#. i18n: file knetworkconfdlg.ui line 85
+#: rc.cpp:247
+#, no-c-format
+msgid "Available Network Interfaces"
+msgstr "可用的網路介面"
+
+#. i18n: file knetworkconfdlg.ui line 110
+#: rc.cpp:250
+#, no-c-format
+msgid "Interface"
+msgstr "介面"
+
+#. i18n: file knetworkconfdlg.ui line 121
+#: rc.cpp:253 rc.cpp:322
+#, no-c-format
+msgid "IP Address"
+msgstr "IP 位址"
+
+#. i18n: file knetworkconfdlg.ui line 132
+#: rc.cpp:256
+#, no-c-format
+msgid "Protocol"
+msgstr "協定"
+
+#. i18n: file knetworkconfdlg.ui line 143
+#: rc.cpp:259
+#, no-c-format
+msgid "State"
+msgstr "狀態"
+
+#. i18n: file knetworkconfdlg.ui line 154
+#: rc.cpp:262
+#, no-c-format
+msgid "Comment"
+msgstr "註解"
+
+#. i18n: file knetworkconfdlg.ui line 175
+#: rc.cpp:265
+#, no-c-format
+msgid "List of configured network devices"
+msgstr "已設定網路設備清單"
+
+#. i18n: file knetworkconfdlg.ui line 194
+#: rc.cpp:268
+#, no-c-format
+msgid "Configure Interface..."
+msgstr "設定介面..."
+
+#. i18n: file knetworkconfdlg.ui line 197
+#: rc.cpp:271
+#, no-c-format
+msgid "Change the settings of the selected device"
+msgstr "更改已選擇設備的設定"
+
+#. i18n: file knetworkconfdlg.ui line 208
+#: rc.cpp:274
+#, no-c-format
+msgid "Enable Interface"
+msgstr "開啟介面"
+
+#. i18n: file knetworkconfdlg.ui line 219
+#: rc.cpp:277
+#, no-c-format
+msgid "Disable Interface"
+msgstr "關閉介面"
+
+#. i18n: file knetworkconfdlg.ui line 248
+#: rc.cpp:280
+#, no-c-format
+msgid "Routes"
+msgstr "路由"
+
+#. i18n: file knetworkconfdlg.ui line 265
+#: rc.cpp:283
+#, no-c-format
+msgid "Default Gateway"
+msgstr "預設閘道"
+
+#. i18n: file knetworkconfdlg.ui line 348
+#: rc.cpp:289
+#, no-c-format
+msgid "Default Gateway IP address"
+msgstr "預設閘道 IP 位址"
+
+#. i18n: file knetworkconfdlg.ui line 373
+#: rc.cpp:292
+#, no-c-format
+msgid "Device:"
+msgstr "設備："
+
+#. i18n: file knetworkconfdlg.ui line 401
+#: rc.cpp:295
+#, no-c-format
+msgid "Network device where to send packets"
+msgstr "用哪個網路設備送出封包"
+
+#. i18n: file knetworkconfdlg.ui line 432
+#: rc.cpp:298
+#, no-c-format
+msgid "Domain Name System"
+msgstr "網域名稱系統"
+
+#. i18n: file knetworkconfdlg.ui line 443
+#: rc.cpp:301
+#, no-c-format
+msgid "Domain Name Servers"
+msgstr "網域名稱伺服器(DNS)"
+
+#. i18n: file knetworkconfdlg.ui line 499
+#: rc.cpp:304
+#, no-c-format
+msgid "Move up the selected server on the list (higher priority)"
+msgstr "將選擇的伺服器往上移（較高優先順序）"
+
+#. i18n: file knetworkconfdlg.ui line 513
+#: rc.cpp:307
+#, no-c-format
+msgid "Move down the selected server on the list (less priority)"
+msgstr "將選擇的伺服器往下移（較低優先順序）"
+
+#. i18n: file knetworkconfdlg.ui line 637
+#: rc.cpp:319
+#, no-c-format
+msgid "Static Hosts"
+msgstr "靜態主機"
+
+#. i18n: file knetworkconfdlg.ui line 738
+#: rc.cpp:337
+#, no-c-format
+msgid "Host name:"
+msgstr "主機名稱："
+
+#. i18n: file knetworkconfdlg.ui line 762
+#: rc.cpp:340
+#, no-c-format
+msgid "Domain name:"
+msgstr "網域名稱："
+
+#. i18n: file knetworkconfdlg.ui line 772
+#: rc.cpp:343
+#, no-c-format
+msgid "Network Profiles"
+msgstr "網路設定檔"
+
+#. i18n: file knetworkconfdlg.ui line 783
+#: rc.cpp:346
+#, no-c-format
+msgid "Available Network Profiles"
+msgstr "可用的網路設定檔"
+
+#. i18n: file knetworkconfdlg.ui line 792
+#: rc.cpp:349
+#, no-c-format
+msgid "Name"
+msgstr "名稱"
+
+#. i18n: file knetworkconfdlg.ui line 821
+#: rc.cpp:352
+#, no-c-format
+msgid "&Load Selected"
+msgstr "載入選擇的(&L)"
+
+#. i18n: file knetworkconfdlg.ui line 829
+#: rc.cpp:355
+#, no-c-format
+msgid "&Save Selected"
+msgstr "儲存選擇的(&S)"
+
+#. i18n: file knetworkconfdlg.ui line 837
+#: rc.cpp:358
+#, no-c-format
+msgid "&Create New..."
+msgstr "建立新的(&C)..."
+
+#. i18n: file knetworkconfdlg.ui line 845
+#: rc.cpp:361
+#, no-c-format
+msgid "&Delete Selected"
+msgstr "刪除選擇的(&D)"
+
+#. i18n: file kreloadnetworkdlg.ui line 28
+#: knetworkconfigparser.cpp:303 rc.cpp:364
+#, no-c-format
+msgid "Reloading Network"
+msgstr "重新載入網路"
+
+#. i18n: file kreloadnetworkdlg.ui line 112
+#: rc.cpp:370
+#, no-c-format
+msgid ""
+"Please wait while the network is reloaded so\n"
+"the changes can take effect."
+msgstr "請稍候，等待網路重新載入，以便讓變更能生效。"
+
+#. i18n: file kselectdistrodlg.ui line 16
+#: rc.cpp:374
+#, no-c-format
+msgid "Unsupported Platform"
+msgstr "不支援的平台"
+
+#. i18n: file kselectdistrodlg.ui line 69
+#: rc.cpp:383
+#, no-c-format
+msgid "Do not ask again"
+msgstr "不要再詢問"
+
+#. i18n: file kselectdistrodlg.ui line 94
+#: rc.cpp:386
+#, no-c-format
+msgid ""
+"<font size=\"+1\"><p align=\"center\"><b>Your Platform is Not Supported</b></p>"
+"</font>"
+msgstr "<font size=\"+1\"><p align=\"center\"><b>未支援您的平台</b></p></font>"
+
+#. i18n: file kselectdistrodlg.ui line 102
+#: rc.cpp:389
+#, no-c-format
+msgid ""
+"You may choose one of the following supported platforms if you are <b>sure</b> "
+"your platform behaves the same as the chosen one. Please be sure, because your "
+"current network configuration could be damaged."
+msgstr "如果您<b>十分確定</b>您的平台的行為與以下的平台一樣，您可以選擇其中一個。但請您要十分確定，因為您的網路設定可能會損毀。"
+
+#: knetworkconfmodule.cpp:94
+msgid "KNetworkConf"
+msgstr "KNetworkConf"
+
+#: knetworkconfmodule.cpp:97
+msgid "Lead Developer"
+msgstr "主要開發者"
+
+#: knetworkconfmodule.cpp:99
+msgid "Provided the Network backend which KNetworkConf relies on."
+msgstr "提供 KNetworkConf 使用的網路後端。"
+
+#: knetworkconfmodule.cpp:101
+msgid "Conectiva Linux Support"
+msgstr "Conectiva Linux 支援"
+
+#: knetworkconfmodule.cpp:103
+msgid "Documentation maintainer, and German translator"
+msgstr "文件維護，德文翻譯"
+
+#: knetworkconfmodule.cpp:105
+msgid "Various bugfixes and features"
+msgstr "修正許多錯誤與提供許多功能"
+
+#: knetworkconfmodule.cpp:107
+msgid "Various bugfixes and Brazilian Portuguese translator"
+msgstr "修正許多錯誤，及巴西、葡萄牙翻譯"
+
+#: knetworkconfmodule.cpp:113
+msgid ""
+"%1Network configuration%2This module allows you to configure your TCP/IP "
+"settings.%3"
+msgstr "%1網路設定%2這個模組允許您設定您的 TCP/IP。%3"
+
+#: knetworkconfigparser.cpp:41
+msgid ""
+"Could not find the backend script for the network configuration detection. "
+"Something is wrong with your installation.\n"
+" Please check that  \n"
+"{KDE_PATH}/%1 \n"
+"file is present."
+msgstr ""
+"找不到偵測網路設定的後端文稿。您的系統可能有問題。\n"
+"請確定 {KDE_PATH}/%1 檔案存在。"
+
+#: knetworkconfigparser.cpp:42
+msgid "Could Not Find Network Configuration Backend Script"
+msgstr "找不到網路設定的後端文稿"
+
+#: knetworkconfigparser.cpp:65 knetworkconfigparser.cpp:95
+#: knetworkconfigparser.cpp:320 knetworkconfigparser.cpp:1016
+msgid ""
+"Could not execute backend script for the network configuration detection. "
+"Something is wrong with your installation."
+msgstr "無法執行偵測網路設定的後端文稿。您的系統可能有問題。"
+
+#: knetworkconfigparser.cpp:66 knetworkconfigparser.cpp:96
+#: knetworkconfigparser.cpp:321 knetworkconfigparser.cpp:1017
+msgid "Could Not Launch Network Configuration Backend Script"
+msgstr "無法叫出網路設定後端文稿"
+
+#: knetworkconfigparser.cpp:113 knetworkconfigparser.cpp:837
+msgid "Could not parse the XML output from the network configuration backend."
+msgstr "無法剖析網路設定後端的 XML 輸出。"
+
+#: knetworkconfigparser.cpp:114
+msgid "Error While Listing Network Interfaces"
+msgstr "列出網路介面時發生錯誤"
+
+#: knetworkconfigparser.cpp:191
+msgid "Could not open file /proc/net/route."
+msgstr "無法開啟檔案 /proc/net/route。"
+
+#: knetworkconfigparser.cpp:192
+msgid "Could Not Open File"
+msgstr "無法開啟檔案"
+
+#: knetworkconfigparser.cpp:304
+msgid "%1Please wait while saving the network settings...%2"
+msgstr "%1請稍候，正在儲存網路設定...%2"
+
+#: knetworkconfigparser.cpp:762
+msgid "Ethernet Network Device"
+msgstr "乙太網路設備"
+
+#: knetworkconfigparser.cpp:764
+msgid "Wireless Network Device"
+msgstr "無線網路設備"
+
+#: knetworkconfigparser.cpp:838
+msgid "Error Loading The Network Configuration"
+msgstr "載入網路設定時發生錯誤"
+
+#: knetworkconfigparser.cpp:1030
+msgid ""
+"Could not parse the list of supported platforms from the network configuration "
+"backend."
+msgstr "無法剖析網路後端送來的支援平台清單。"
+
+#: knetworkconfigparser.cpp:1031
+msgid "Error Obtaining Supported Platforms List"
+msgstr "取得支援平台清單時發生錯誤"
+
+#: version.h:5
+msgid ""
+"KNetworkConf - A KDE Control Center module to configure TCP/IP settings."
+msgstr "KNetworkConf - KDE 控制中心的模組，用於設定 TCP/IP。"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kpackage.po b/tde-i18n-zh_TW/messages/kdeadmin/kpackage.po
new file mode 100644
index 00000000000..3bdea0e8236
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kpackage.po
@@ -0,0 +1,1101 @@
+# translation of kpackage.po to Chinese Traditional
+# Copyright (C) 2001-2002, 2005, 2006 Free Software Foundation, Inc.
+#
+# Translator: Allen Huang <lancelot@pchome.com.tw>, 2001.
+#             Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
+#             Frank Weng <franklin at goodhorse dot idv dot tw>, 2005.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kpackage\n"
+"POT-Creation-Date: 2006-08-29 02:38+0200\n"
+"PO-Revision-Date: 2006-08-30 09:27+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Allen Huang,Chao-Hsiung Liao,Frank Weng"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+"lancelot@pchome.com.tw,pesder.liao@msa.hinet.net,franklin at goodhorse dot idv "
+"dot tw"
+
+#: cache.cpp:63 cache.cpp:84
+#, c-format
+msgid "Cannot create folder %1"
+msgstr "不能建立目錄 %1"
+
+#: cache.cpp:98 kpackage.cpp:588
+#, c-format
+msgid "Malformed URL: %1"
+msgstr "格式錯誤的 URL： %1"
+
+#: debAptInterface.cpp:49
+msgid "APT: Debian"
+msgstr "APT： Debian"
+
+#: debAptInterface.cpp:51
+msgid "Querying DEB APT package list: "
+msgstr "查詢 DEB 套件清單："
+
+#: debAptInterface.cpp:52
+msgid "KPackage: Waiting on APT-GET"
+msgstr "Kpackage： 等待 APT-GET"
+
+#: debAptInterface.cpp:56
+msgid "Location of Debian Packages"
+msgstr "Debian 套件的位置"
+
+#: debAptInterface.cpp:58
+msgid ""
+"_: APT sources\n"
+"A"
+msgstr "APT 來源"
+
+#: debAptInterface.cpp:59
+msgid "APT Sources Entries"
+msgstr "APT 來源項目"
+
+#: debAptInterface.cpp:60 debDpkgInterface.cpp:77 kissInterface.cpp:73
+#: slackInterface.cpp:91
+msgid ""
+"_: Folders\n"
+"F"
+msgstr "目錄"
+
+#: debAptInterface.cpp:62 debDpkgInterface.cpp:79
+msgid "Location of Folders Containing Debian Packages"
+msgstr "含有 Debian 套件的目錄位置"
+
+#: debAptInterface.cpp:67
+msgid "Download only"
+msgstr "只下載"
+
+#: debAptInterface.cpp:68
+msgid "No download"
+msgstr "不下載"
+
+#: debAptInterface.cpp:69
+msgid "Ignore missing"
+msgstr "忽略遺失的"
+
+#: debAptInterface.cpp:70
+msgid "Ignore hold"
+msgstr "忽略鎖定"
+
+#: debAptInterface.cpp:71
+msgid "Allow Unauthenticated"
+msgstr "允許未經認證"
+
+#: debAptInterface.cpp:72 debAptInterface.cpp:76
+msgid "Assume yes"
+msgstr "假設為“是”"
+
+#: debAptInterface.cpp:73 debAptInterface.cpp:77 debDpkgInterface.cpp:92
+#: fbsdInterface.cpp:86 rpmInterface.cpp:75 slackInterface.cpp:101
+msgid "Test (do not uninstall)"
+msgstr "測試（不要真的反安裝）"
+
+#: debAptInterface.cpp:75 debDpkgInterface.cpp:89
+msgid "Purge Config Files"
+msgstr "清除設定檔案"
+
+#: debAptInterface.cpp:107
+msgid "U&pgrade"
+msgstr "升級(&P)"
+
+#: debAptInterface.cpp:111
+msgid "&Fixup"
+msgstr "修補(&F)"
+
+#: debAptInterface.cpp:115
+msgid "&Apt-File Update"
+msgstr "Apt-File 更新(&A)"
+
+#: debAptInterface.cpp:159 debAptInterface.cpp:368
+msgid "The %1 program needs to be installed"
+msgstr "需要安裝 %1"
+
+#: debAptInterface.cpp:188
+#, c-format
+msgid "Querying DEB APT remote package list: %1"
+msgstr "查詢 DEB APT 遠端套件清單： %1"
+
+#: debAptInterface.cpp:194
+#, c-format
+msgid "Processing DEB APT remote package list: %1"
+msgstr "處理 DEB APT 遠端套件清單： %1"
+
+#: debAptInterface.cpp:231 debAptInterface.cpp:287 rpmInterface.cpp:200
+msgid "DEB APT"
+msgstr "DEB APT"
+
+#: debAptInterface.cpp:244
+msgid "Querying DEB APT available list"
+msgstr "查詢 DEB APT 可用的清單"
+
+#: debAptInterface.cpp:246
+#, c-format
+msgid "Querying DEB APT available list: %1"
+msgstr "查詢 DEB APT 可用的清單： %1"
+
+#: debAptInterface.cpp:251
+msgid "Processing DEB APT available list"
+msgstr "處理 DEB APT 可用的清單"
+
+#: debAptInterface.cpp:253
+#, c-format
+msgid "Processing DEB APT available list: %1"
+msgstr "處理 DEB APT 可用的清單： %1"
+
+#: debDpkgInterface.cpp:61
+msgid "DPKG: Debian"
+msgstr "DPKG: Debian"
+
+#: debDpkgInterface.cpp:64 debInterface.cpp:151
+msgid "Querying DEB package list: "
+msgstr "查詢 DEB 套件清單："
+
+#: debDpkgInterface.cpp:65
+msgid "Kpackage: Waiting on DPKG"
+msgstr "Kpackage： 等待 DPKG"
+
+#: debDpkgInterface.cpp:67
+msgid "Location of Debian Package Archives"
+msgstr "Debian 套件檔案庫的位置"
+
+#: debDpkgInterface.cpp:68
+msgid ""
+"_: Location\n"
+"L"
+msgstr "位置"
+
+#: debDpkgInterface.cpp:70
+msgid ""
+"Version\n"
+"Architecture"
+msgstr ""
+"版本\n"
+"結構"
+
+#: debDpkgInterface.cpp:71 debDpkgInterface.cpp:76
+msgid "Location of Base Folder of Debian Distribution"
+msgstr "Debian 發行版本基礎目錄的位置"
+
+#: debDpkgInterface.cpp:73
+msgid ""
+"_: Packages\n"
+"P"
+msgstr "套件"
+
+#: debDpkgInterface.cpp:75
+msgid "Location of 'Packages' Files for Sections of Debian Distributions"
+msgstr "Debian 發行版本區中“Packages”檔案的位置"
+
+#: debDpkgInterface.cpp:84
+msgid "Allow Downgrade"
+msgstr "可降級"
+
+#: debDpkgInterface.cpp:85
+msgid "Check Conflicts"
+msgstr "檢查是否衝突"
+
+#: debDpkgInterface.cpp:86 debDpkgInterface.cpp:91 fbsdInterface.cpp:81
+#: fbsdInterface.cpp:85 rpmInterface.cpp:69 rpmInterface.cpp:74
+msgid "Check Dependencies"
+msgstr "檢查是否有依附"
+
+#: debDpkgInterface.cpp:87 fbsdInterface.cpp:82 rpmInterface.cpp:70
+#: slackInterface.cpp:99
+msgid "Test (do not install)"
+msgstr "測試（不要真的安裝）"
+
+#: fbsdInterface.cpp:59
+msgid "BSD"
+msgstr "BSD"
+
+#: fbsdInterface.cpp:70
+msgid "Querying package list: "
+msgstr "查詢套件清單："
+
+#: fbsdInterface.cpp:72
+msgid "Location of BSD Packages and Ports"
+msgstr "BSD 套件及 ports 的位置"
+
+#: fbsdInterface.cpp:73
+msgid "Ports"
+msgstr "Ports"
+
+#: fbsdInterface.cpp:74
+msgid "Location of Ports Tree (e.g. /usr/ports or /usr/opt)"
+msgstr "ports 目錄樹(如 /usr/ports 或 /usr/opt)的位置"
+
+#: fbsdInterface.cpp:75
+msgid "Packages"
+msgstr "套件"
+
+#: fbsdInterface.cpp:76
+msgid "Location of Folders Containing BSD Packages or Package Trees"
+msgstr "含有 BSD 套件或套件目錄樹的目錄的位置"
+
+#: fbsdInterface.cpp:80 fbsdInterface.cpp:84
+msgid "Ignore Scripts"
+msgstr "忽略命令稿"
+
+#: fbsdInterface.cpp:131
+msgid "Getting package info"
+msgstr "擷取套件資訊"
+
+#: fbsdInterface.cpp:203 fbsdInterface.cpp:409 fbsdInterface.cpp:410
+#: fbsdInterface.cpp:559 fbsdInterface.cpp:561 packageProperties.cpp:175
+msgid "none"
+msgstr "無"
+
+#: fbsdInterface.cpp:204 fbsdInterface.cpp:411 fbsdInterface.cpp:562
+msgid "binary package and source port"
+msgstr "二進位套件及來源 port"
+
+#: fbsdInterface.cpp:204 fbsdInterface.cpp:411 fbsdInterface.cpp:562
+msgid "binary package"
+msgstr "二進位套件"
+
+#: fbsdInterface.cpp:204 fbsdInterface.cpp:411 fbsdInterface.cpp:562
+msgid "source port"
+msgstr "來源 port"
+
+#: fbsdInterface.cpp:237
+msgid "Getting file list"
+msgstr "擷取檔案清單"
+
+#: fbsdInterface.cpp:251
+msgid "Can't find package name!"
+msgstr "找不到套件名稱！"
+
+#: fbsdInterface.cpp:501
+msgid "Querying BSD packages database for installed packages"
+msgstr "查詢已安裝套件之 BSD 套件資料庫"
+
+#: fbsdInterface.cpp:530
+#, c-format
+msgid "Unexpected output from pkg_info (looking for package name): %1"
+msgstr "pkg_info 非預期的輸出（尋找套件名稱）： %1"
+
+#: findf.cpp:48
+msgid "Find File"
+msgstr "搜尋檔案"
+
+#: findf.cpp:50 search.cpp:42
+msgid "&Find"
+msgstr "搜尋(&F)"
+
+#: findf.cpp:59 search.cpp:40 search.cpp:50
+msgid "Find Package"
+msgstr "搜尋套件"
+
+#: findf.cpp:70
+msgid "Find:"
+msgstr "搜尋:"
+
+#: findf.cpp:76 managementWidget.cpp:83
+msgid "Installed"
+msgstr "已安裝"
+
+#: findf.cpp:77
+msgid "Type"
+msgstr "類型"
+
+#: findf.cpp:79 kplview.cpp:58
+msgid "Package"
+msgstr "套件"
+
+#: findf.cpp:80
+msgid "File Name"
+msgstr "檔案名稱"
+
+#: findf.cpp:85
+msgid "Also search uninstalled packages"
+msgstr "未安裝的套件一併搜尋"
+
+#: findf.cpp:87
+msgid "Also search uninstalled packages (apt-file needs to be installed)"
+msgstr "未安裝的套件一併搜尋(需要安裝 apt-file)"
+
+#: findf.cpp:174
+msgid "--Nothing found--"
+msgstr "--找不到任何東西--"
+
+#: findf.cpp:224
+msgid "Incorrect URL type"
+msgstr "不正確的 URL 類型"
+
+#: gentooInterface.cpp:58
+msgid "Gentoo"
+msgstr "Gentoo"
+
+#: gentooInterface.cpp:68
+msgid "Querying Gentoo package list: "
+msgstr "查詢 Gentoo 套件清單："
+
+#: gentooInterface.cpp:125
+msgid "Looking for Gentoo packages: "
+msgstr "尋找 Gentoo 套件:"
+
+#: kissInterface.cpp:62
+msgid "KISS"
+msgstr "KISS"
+
+#: kissInterface.cpp:72
+msgid "Location of KISS Packages"
+msgstr "KISS 套件的位置"
+
+#: kissInterface.cpp:75
+msgid "Location of Folders Containing KISS Packages"
+msgstr "含有 KISS 套件的目錄的位置"
+
+#: kissInterface.cpp:81 kissInterface.cpp:139
+msgid "Querying KISS package list: "
+msgstr "查詢 KISS 套件清單："
+
+#: kissInterface.cpp:82
+msgid "KPackage: Waiting on KISS"
+msgstr "Kpackage： 等待 KISS"
+
+#: kpPty.cpp:160
+msgid ""
+"The action you requested uses ssh. Please enter the password or pass phrase.\n"
+msgstr ""
+"您要求的動作需要 ssh。請輸入密碼或密碼片語。\n"
+
+#: kpPty.cpp:163
+msgid ""
+"The action you requested needs root privileges. Please enter root's password.\n"
+msgstr ""
+"您要求的動作需要 root 權限。請輸入 root 密碼。\n"
+
+#: kpPty.cpp:166
+msgid ""
+"The action you requested needs root privileges. Please enter your SUDO "
+"password.\n"
+msgstr ""
+"您要求的動作需要 root 權限。請輸入您的 sudo 密碼。\n"
+
+#: kpPty.cpp:182
+msgid "Login Problem: Please login manually"
+msgstr "登入問題：請手動登入"
+
+#: kpackage.cpp:103
+msgid "Find &Package..."
+msgstr "搜尋套件(&P)..."
+
+#: kpackage.cpp:107
+msgid "Find &File..."
+msgstr "搜尋檔案(&F)..."
+
+#: kpackage.cpp:124
+msgid "&Expand Tree"
+msgstr "展開樹狀結構(&E)"
+
+#: kpackage.cpp:128
+msgid "&Collapse Tree"
+msgstr "摺疊樹狀結構(&C)"
+
+#: kpackage.cpp:132
+msgid "Clear &Marked"
+msgstr "清除已標記的(&M)"
+
+#: kpackage.cpp:136
+msgid "Mark &All"
+msgstr "全部標記(&A)"
+
+#: kpackage.cpp:140
+msgid "&Install"
+msgstr "安裝(&I)"
+
+#: kpackage.cpp:148
+msgid "&Uninstall"
+msgstr "反安裝(&U)"
+
+#: kpackage.cpp:156
+msgid "&Install Marked"
+msgstr "安裝已標記的(&I)"
+
+#: kpackage.cpp:160
+msgid "&Uninstall Marked"
+msgstr "反安裝已標記的(&U)"
+
+#: kpackage.cpp:173
+msgid "Configure &KPackage..."
+msgstr "設定 Kpackage (&K)..."
+
+#: kpackage.cpp:177
+msgid "Clear Package &Folder Cache"
+msgstr "清除套件目錄快取(&F)"
+
+#: kpackage.cpp:181
+msgid "Clear &Package Cache"
+msgstr "清除套件快取(&P)"
+
+#: kpackage.cpp:372
+msgid "Management Mode"
+msgstr "管理模式"
+
+#: kpackage.cpp:427
+msgid "Select Package"
+msgstr "選擇套件"
+
+#: kpackage.cpp:488
+#, c-format
+msgid "Unknown package type: %1"
+msgstr "未知的套件類型： %1"
+
+#: kpackage.cpp:490
+#, c-format
+msgid "File not found: %1"
+msgstr "找不到檔案： %1"
+
+#: kpackage.cpp:646
+msgid "Starting KIO"
+msgstr "啟動 Kio"
+
+#: kpackage.cpp:651
+msgid "KIO finished"
+msgstr "Kio 完成"
+
+#: kpackage.cpp:663
+msgid "KIO failed"
+msgstr "Kio 失敗"
+
+#: kpackage.cpp:676
+msgid "Open location:"
+msgstr "開啟位置:"
+
+#: kplview.cpp:60
+msgid "Mark"
+msgstr "標記"
+
+#: kplview.cpp:62
+msgid "Summary"
+msgstr "摘要"
+
+#: kplview.cpp:64
+msgid "Size"
+msgstr "大小"
+
+#: kplview.cpp:66
+msgid "Version"
+msgstr "版本"
+
+#: kplview.cpp:68
+msgid "Old Version"
+msgstr "舊版本"
+
+#: main.cpp:59
+msgid "KDE Package installer"
+msgstr "KDE 套件安裝程式"
+
+#: main.cpp:63
+msgid "Remote host for Debian APT, via SSH"
+msgstr "Debian APT 遠端主機，透過 SSH"
+
+#: main.cpp:65
+msgid "Package to install"
+msgstr "要安裝的套件"
+
+#: main.cpp:83
+msgid "KPackage"
+msgstr "KPackage"
+
+#: managementWidget.cpp:84
+msgid "Updated"
+msgstr "已更新"
+
+#: managementWidget.cpp:85
+msgid "New"
+msgstr "新的"
+
+#: managementWidget.cpp:86
+msgid "All"
+msgstr "全部"
+
+#: managementWidget.cpp:138
+msgid "Clear Search"
+msgstr "清除搜尋結果"
+
+#: managementWidget.cpp:141
+msgid "Search: "
+msgstr "搜尋："
+
+#: managementWidget.cpp:164
+msgid "Uninstall Marked"
+msgstr "反安裝已標記的"
+
+#: managementWidget.cpp:168
+msgid "Install Marked"
+msgstr "安裝已標記的"
+
+#: managementWidget.cpp:193 pkgOptions.cpp:361 pkgOptions.cpp:363
+msgid "Uninstall"
+msgstr "反安裝"
+
+#: managementWidget.cpp:197 managementWidget.cpp:268 pkgOptions.cpp:346
+#: pkgOptions.cpp:348
+msgid "Install"
+msgstr "安裝"
+
+#: managementWidget.cpp:270
+msgid "Fetch"
+msgstr "取回"
+
+#: managementWidget.cpp:355
+msgid "Building package tree"
+msgstr "建立套件的樹狀結構"
+
+#: managementWidget.cpp:444
+msgid ""
+"Filename not available\n"
+msgstr ""
+"檔案名稱不存在\n"
+
+#: options.cpp:73
+msgid "&Types"
+msgstr "類型(&T)"
+
+#: options.cpp:75
+msgid "Handle Package Type"
+msgstr "處理套件類型"
+
+#: options.cpp:77
+msgid "Remote Host"
+msgstr "遠端主機"
+
+#: options.cpp:78
+msgid "Use remote host (Debian APT only):"
+msgstr "使用遠端主機(只有 Debian APT):"
+
+#: options.cpp:98
+msgid "%1: %2 not found"
+msgstr "%1: 找不到 %2"
+
+#: options.cpp:103
+msgid "Enable"
+msgstr "啟用"
+
+#: options.cpp:105
+msgid "Location of Packages"
+msgstr "套件的位置..."
+
+#: options.cpp:114
+msgid "Cac&he"
+msgstr "快取(&H)"
+
+#: options.cpp:117
+msgid "Cache Remote Package Folders"
+msgstr "快取遠端套件目錄"
+
+#: options.cpp:123 options.cpp:139
+msgid "Always"
+msgstr "永遠"
+
+#: options.cpp:126 options.cpp:142
+msgid "During a session"
+msgstr "工作階段期間"
+
+#: options.cpp:129 options.cpp:145
+msgid "Never"
+msgstr "永不"
+
+#: options.cpp:133
+msgid "Cache Remote Package Files"
+msgstr "快取遠端套件檔案"
+
+#: options.cpp:148
+msgid "Cache Folder"
+msgstr "快取目錄"
+
+#: options.cpp:155
+msgid "&Misc"
+msgstr "雜項(&M)"
+
+#: options.cpp:162
+msgid "Execute Privileged Commands Using"
+msgstr "執行已設限的命令用..."
+
+#: options.cpp:168
+msgid "su command"
+msgstr "su 命令"
+
+#: options.cpp:171
+msgid "sudo command"
+msgstr "sudo 命令"
+
+#: options.cpp:174
+msgid "ssh command"
+msgstr "ssh 命令"
+
+#: options.cpp:177
+msgid "Verify file list"
+msgstr "查證檔案清單"
+
+#: options.cpp:180
+msgid "Read information from all local package files"
+msgstr "從所有本地端套件檔案讀取資訊"
+
+#: packageDisplay.cpp:98
+msgid "File List"
+msgstr "檔案清單"
+
+#: packageDisplay.cpp:99
+msgid "Change Log"
+msgstr "更新紀錄"
+
+#: packageDisplay.cpp:265
+msgid " - No change log -"
+msgstr " - 沒有更新紀錄 -"
+
+#: packageDisplay.cpp:283 packageDisplay.cpp:309
+msgid "Updating File List"
+msgstr "更新檔案清單"
+
+#: packageDisplay.cpp:316
+msgid " Files"
+msgstr " 檔案"
+
+#: packageDisplay.cpp:375
+msgid "&Open With..."
+msgstr "開啟用...(&O)"
+
+#: packageInfo.cpp:114 slackInterface.cpp:344
+msgid "OTHER"
+msgstr "其他"
+
+#: packageProperties.cpp:68
+msgid "name"
+msgstr "名稱"
+
+#: packageProperties.cpp:69
+msgid "summary"
+msgstr "摘要"
+
+#: packageProperties.cpp:70
+msgid "version"
+msgstr "版本"
+
+#: packageProperties.cpp:71
+msgid "old-version"
+msgstr "舊版本"
+
+#: packageProperties.cpp:72
+msgid "status"
+msgstr "狀態"
+
+#: packageProperties.cpp:73
+msgid "group"
+msgstr "群組"
+
+#: packageProperties.cpp:74
+msgid "size"
+msgstr "大小"
+
+#: packageProperties.cpp:75
+msgid "file-size"
+msgstr "檔案大小"
+
+#: packageProperties.cpp:76
+msgid "description"
+msgstr "描述"
+
+#: packageProperties.cpp:77
+msgid "url"
+msgstr "URL"
+
+#: packageProperties.cpp:78
+msgid "architecture"
+msgstr "結構"
+
+#: packageProperties.cpp:80
+msgid "unsatisfied dependencies"
+msgstr "缺少的附屬套件"
+
+#: packageProperties.cpp:81
+msgid "pre-depends"
+msgstr "預先-依附"
+
+#: packageProperties.cpp:82
+msgid "dependencies"
+msgstr "附屬套件"
+
+#: packageProperties.cpp:83
+msgid "depends"
+msgstr "依附"
+
+#: packageProperties.cpp:84
+msgid "conflicts"
+msgstr "衝突"
+
+#: packageProperties.cpp:85
+msgid "provides"
+msgstr "提供"
+
+#: packageProperties.cpp:86
+msgid "recommends"
+msgstr "建議"
+
+#: packageProperties.cpp:87
+msgid "replaces"
+msgstr "取代"
+
+#: packageProperties.cpp:88
+msgid "suggests"
+msgstr "提議"
+
+#: packageProperties.cpp:89
+msgid "priority"
+msgstr "優先權"
+
+#: packageProperties.cpp:91
+msgid "essential"
+msgstr "必要的"
+
+#: packageProperties.cpp:92
+msgid "install time"
+msgstr "安裝時間"
+
+#: packageProperties.cpp:93
+msgid "config-version"
+msgstr "設定-版本"
+
+#: packageProperties.cpp:94
+msgid "distribution"
+msgstr "發行版本"
+
+#: packageProperties.cpp:95
+msgid "vendor"
+msgstr "廠商"
+
+#: packageProperties.cpp:96
+msgid "maintainer"
+msgstr "維護者"
+
+#: packageProperties.cpp:97
+msgid "packager"
+msgstr "包裝者"
+
+#: packageProperties.cpp:98
+msgid "source"
+msgstr "來源"
+
+#: packageProperties.cpp:99
+msgid "build-time"
+msgstr "建立-時間"
+
+#: packageProperties.cpp:100
+msgid "build-host"
+msgstr "建立-主機"
+
+#: packageProperties.cpp:101
+msgid "base"
+msgstr "基部"
+
+#: packageProperties.cpp:102
+msgid "filename"
+msgstr "檔案名稱"
+
+#: packageProperties.cpp:103
+msgid "serial"
+msgstr "序號"
+
+#: packageProperties.cpp:105
+msgid "also in"
+msgstr "也出現在"
+
+#: packageProperties.cpp:106
+msgid "run depends"
+msgstr "執行時依附"
+
+#: packageProperties.cpp:107
+msgid "build depends"
+msgstr "建立時依附"
+
+#: packageProperties.cpp:108
+msgid "available as"
+msgstr "存在於"
+
+#: pkgInterface.cpp:71
+msgid "'Delete this window to continue'"
+msgstr "'關掉本視窗以繼續"
+
+#: pkgInterface.cpp:260
+msgid "Starting Kio"
+msgstr "啟動 Kio"
+
+#: pkgInterface.cpp:265
+msgid "Kio finished"
+msgstr "Kio 完成"
+
+#: pkgInterface.cpp:275
+msgid "Kio failed"
+msgstr "Kio 失敗"
+
+#: pkgInterface.cpp:300
+#, c-format
+msgid "Cannot read folder %1"
+msgstr "不能讀取目錄 %1"
+
+#: pkgInterface.cpp:330
+msgid "Verifying"
+msgstr "查證中"
+
+#: pkgOptions.cpp:98
+msgid "Keep this window"
+msgstr "保持此視窗"
+
+#: pkgOptions.cpp:117
+msgid "PACKAGES"
+msgstr "套件"
+
+#: pkgOptions.cpp:205
+msgid ""
+"_n: %1: 1 %2 Package\n"
+"%1: %n %2 Packages"
+msgstr "%1: %n %2 個套件"
+
+#: pkgOptions.cpp:271
+msgid "Done"
+msgstr "完成"
+
+#: procbuf.cpp:121
+msgid "Kprocess Failure"
+msgstr "Kprocess 失敗"
+
+#: procbuf.cpp:139
+#, c-format
+msgid "Timeout: %1"
+msgstr "逾時： %1"
+
+#: procbuf.cpp:145
+#, c-format
+msgid "Kprocess error:%1"
+msgstr "Kprocess 錯誤：%1"
+
+#. i18n: file kpackageui.rc line 13
+#: rc.cpp:6
+#, no-c-format
+msgid "&Packages"
+msgstr "套件(&P)"
+
+#. i18n: file kpackageui.rc line 30
+#: rc.cpp:9
+#, no-c-format
+msgid "&Cache"
+msgstr "快取(&C)"
+
+#. i18n: file kpackageui.rc line 36
+#: rc.cpp:12
+#, no-c-format
+msgid "Spe&cial"
+msgstr "特別的(&C)"
+
+#. i18n: file kpackageui.rc line 38
+#: rc.cpp:15
+#, no-c-format
+msgid "&APT: Debian"
+msgstr "&APT: Debian"
+
+#: rpmInterface.cpp:48
+msgid "RPM"
+msgstr "RPM"
+
+#: rpmInterface.cpp:58
+msgid "Location of RPM Package Archives"
+msgstr "RPM 套件資料的位置"
+
+#: rpmInterface.cpp:59
+msgid ""
+"_: Folder\n"
+"F"
+msgstr "目錄"
+
+#: rpmInterface.cpp:60
+msgid "Location of Folders Containing RPM Packages"
+msgstr "含有 RPM 套件的目錄的位置"
+
+#: rpmInterface.cpp:66
+msgid "Upgrade"
+msgstr "升級"
+
+#: rpmInterface.cpp:67
+msgid "Replace Files"
+msgstr "取代檔案"
+
+#: rpmInterface.cpp:68
+msgid "Replace Packages"
+msgstr "取代套件"
+
+#: rpmInterface.cpp:72
+msgid "Remove all versions"
+msgstr "移除所有版本"
+
+#: rpmInterface.cpp:73
+msgid "Use Scripts"
+msgstr "使用命令稿"
+
+#: rpmInterface.cpp:78
+msgid "Querying RPM package list: "
+msgstr "查詢 RPM 套件清單："
+
+#: rpmInterface.cpp:163
+msgid "Querying RPM package list"
+msgstr "查詢 RPM 套件清單"
+
+#: rpmInterface.cpp:167
+msgid "Processing RPM package list"
+msgstr "處理 RPM 套件清單"
+
+#: search.cpp:64
+msgid "Sub string"
+msgstr "子字串"
+
+#: search.cpp:70
+msgid "Wrap search"
+msgstr "包裝搜尋"
+
+#: search.cpp:106
+msgid "Note"
+msgstr "附註"
+
+#: search.cpp:107
+msgid "%1 was not found."
+msgstr "找不到 %1"
+
+#: slackInterface.cpp:68
+msgid "Slackware"
+msgstr "Slackware"
+
+#: slackInterface.cpp:80 slackInterface.cpp:208 slackInterface.cpp:260
+#: slackInterface.cpp:621
+msgid "Querying SLACK package list: "
+msgstr "查詢 SLACK 套件清單："
+
+#: slackInterface.cpp:81
+msgid "KPackage: Waiting on SLACK"
+msgstr "Kpackage： 等待 SLACK"
+
+#: slackInterface.cpp:83
+msgid "Location of Slackware Package Archives"
+msgstr "Slackware 套件資料的位置"
+
+#: slackInterface.cpp:84
+msgid ""
+"_: Install location\n"
+"I"
+msgstr "安裝位置"
+
+#: slackInterface.cpp:86
+msgid "Location of a 'PACKAGES.TXT' File for Extended Information"
+msgstr "延伸資訊的“PACKAGES.TXT”檔案的位置"
+
+#: slackInterface.cpp:87
+msgid ""
+"_: Packages file\n"
+"P"
+msgstr "套件檔案"
+
+#: slackInterface.cpp:89
+msgid "Location of 'PACKAGES.TXT' File for Slackware Distribution"
+msgstr "Slackware 發行版本的“PACKAGES.TXT”檔案的位置"
+
+#: slackInterface.cpp:90
+msgid "Location of Base Folder of Slackware Distribution"
+msgstr "Slackware 發行版本起始目錄的位置"
+
+#: slackInterface.cpp:93
+msgid "Location of Folders Containing Slackware Packages"
+msgstr "含有 Slackware 套件的目錄的位置"
+
+#: slackInterface.cpp:119
+msgid "Base System"
+msgstr "起始系統"
+
+#: slackInterface.cpp:120
+msgid "Linux Applications"
+msgstr "Linux 應用程式"
+
+#: slackInterface.cpp:121
+msgid "Program Development"
+msgstr "程式開發"
+
+#: slackInterface.cpp:122
+msgid "GNU EMacs"
+msgstr "GNU EMacs"
+
+#: slackInterface.cpp:123
+msgid "FAQs"
+msgstr "常見問題"
+
+#: slackInterface.cpp:124
+msgid "Kernel Source"
+msgstr "核心源始碼"
+
+#: slackInterface.cpp:125
+msgid "Networking"
+msgstr "網路"
+
+#: slackInterface.cpp:126
+msgid "TeX Distribution"
+msgstr "TeX 分配套件"
+
+#: slackInterface.cpp:127
+msgid "TCL Script Language"
+msgstr "TCL 命令稿語言"
+
+#: slackInterface.cpp:128
+msgid "X Window System"
+msgstr "X 視窗系統"
+
+#: slackInterface.cpp:129
+msgid "X Applications"
+msgstr "X 應用程式"
+
+#: slackInterface.cpp:130
+msgid "X Development Tools"
+msgstr "X 開發工具"
+
+#: slackInterface.cpp:131
+msgid "XView and OpenLook"
+msgstr "XView 與 OpenLook"
+
+#: slackInterface.cpp:132
+msgid "Games"
+msgstr "遊戲"
+
+#: updateLoc.cpp:51 updateLoc.cpp:134
+msgid "Use"
+msgstr "使用"
+
+#: updateLoc.cpp:142
+msgid "Subfolders"
+msgstr "子目錄"
+
+#: updateLoc.cpp:224
+msgid "Package File"
+msgstr "套件檔案"
+
+#: updateLoc.cpp:243
+msgid "Package Archive"
+msgstr "套件檔案庫"
+
+#: updateLoc.cpp:344
+msgid "File truncated..."
+msgstr "檔案被截斷..."
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/ksysv.po b/tde-i18n-zh_TW/messages/kdeadmin/ksysv.po
new file mode 100644
index 00000000000..0aa090c8f6e
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/ksysv.po
@@ -0,0 +1,926 @@
+# Traditional Chinese Translation of ksysv
+# Copyright (C) 2001, 2005 Free Software Foundation, Inc.
+# Jing-Jong Shyue <shyue@sonoma.com.tw>, 2001.
+# Yuan-Chen Cheng <ycheng@slat.org>, 2002.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: ksysv\n"
+"POT-Creation-Date: 2007-09-19 01:14+0200\n"
+"PO-Revision-Date: 2005-12-15 15:45+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: IOCore.cpp:51
+msgid ""
+"<error>FAILED</error> to remove <cmd>%1</cmd> from <cmd>%2</cmd>: \"%3\""
+"<br/>"
+msgstr "從 <cmd>%2</cmd> 移除 <cmd>%1</cmd> <error>失敗</error>: \"%3\"<br/>"
+
+#: IOCore.cpp:55
+msgid ""
+"FAILED to remove %1 from %2: \"%3\"\n"
+msgstr ""
+"無法從 %2 移除 %1: \"%3\"\n"
+
+#: IOCore.cpp:62
+msgid "removed <cmd>%1</cmd> from <cmd>%2</cmd><br/>"
+msgstr "從 <cmd>%2</cmd> 移除 <cmd>%1</cmd><br/>"
+
+#: IOCore.cpp:66
+msgid ""
+"removed %1 from %2\n"
+msgstr ""
+"從 %2 移除 %1\n"
+
+#: IOCore.cpp:95
+msgid "created <cmd>%1</cmd> in <cmd>%2</cmd><br/>"
+msgstr "在 <cmd>%2</cmd> 建立 <cmd>%1</cmd><br/>"
+
+#: IOCore.cpp:96
+msgid ""
+"created %1 in %2\n"
+msgstr ""
+"在 %2 建立 %1\n"
+
+#: IOCore.cpp:100
+msgid ""
+"<error>FAILED</error> to create <cmd>%1</cmd> in <cmd>%2</cmd>: \"%3\""
+"<br/>"
+msgstr "在 <cmd>%2</cmd> 建立 <cmd>%1</cmd> <error>失敗</error>: \"%3\"<br/>"
+
+#: IOCore.cpp:105
+msgid ""
+"FAILED to create %1 in %2: \"%3\"\n"
+msgstr ""
+"無法在 %2 建立 %1: \"%3\"\n"
+
+#. i18n: file ksysvui.rc line 73
+#: OldView.cpp:89 OldView.cpp:91 rc.cpp:21 rc.cpp:27
+#, no-c-format
+msgid "Runlevel Menu"
+msgstr "啟動層級選單"
+
+#. i18n: file ksysvui.rc line 82
+#: OldView.cpp:93 rc.cpp:24
+#, no-c-format
+msgid "Services Menu"
+msgstr "服務選單"
+
+#: OldView.cpp:193
+msgid ""
+"&Available\n"
+"Services"
+msgstr ""
+"可用\n"
+"服務 (&A)"
+
+#: OldView.cpp:198
+msgid ""
+"<p>These are the <img src=\"small|exec\"/> <strong>services</strong> "
+"available on your computer. To start a service, drag it onto the <em>Start</em> "
+"section of a runlevel.</p>"
+"<p>To stop one, do the same for the <em>Stop</em> section.</p>"
+msgstr ""
+"<p>這式您系統紹可用的 <img src=\"small|exec\"/><strong>服務</strong>"
+". 要啟動一個服務, 拖曳他到執行層級的<em>啟動</em>區域.</p>"
+"<p>要停止, 拖曳到<em>停止</em>區域.</p>"
+
+#: OldView.cpp:242
+msgid ""
+"<p>You can drag services from a runlevel onto the <img src=\"small|trash\"/> "
+"<strong>trashcan</strong> to delete them from that runlevel.</p>"
+"<p>The <strong>Undo command</strong> can be used to restore deleted entries.</p>"
+msgstr ""
+"<p>您可以從啟動層級拖曳服務到 <img src=\"small|trash\"/> <strong>資源回收桶</strong> 以將之刪除.</p>"
+"<p><strong>復原</strong> 可以用來復原刪除的項目.</p>"
+
+#: OldView.cpp:254
+#, c-format
+msgid "Runlevel &%1"
+msgstr "啟動層級 &%1"
+
+#: OldView.cpp:256
+#, c-format
+msgid "Runlevel %1"
+msgstr "啟動層級 %1"
+
+#: OldView.cpp:260
+msgid ""
+"<p>These are the services <strong>started</strong> in runlevel %1.</p>"
+"<p>The number shown on the left of the <img src=\"user|ksysv_start\"/> "
+"icon determines the order in which the services are started. You can arrange "
+"them via drag and drop, as long as a suitable <em>sorting number</em> "
+"can be generated.</p>"
+"<p>If that's not possible, you have to change the number manually via the "
+"<strong>Properties dialog box</strong>.</p>"
+msgstr ""
+"<p>這是在啟動層級 %1 所<strong>啟動</strong> 的服務.</p>"
+"<p>在<img src=\"user|ksysv_start\"/>圖示左邊的編號決定了服務啟動的順序. 您可以經由拖放來排序, 如此適當的<em>"
+"排列編號</em>會被產生.</p>"
+"<p>如果沒有適當的產生, 您可以經由在<strong>內容對話方塊</strong>中手動改變編號.</p>"
+
+#: OldView.cpp:268
+msgid "Start"
+msgstr "啟動"
+
+#: OldView.cpp:278
+msgid ""
+"<p>These are the services <strong>stopped</strong> in runlevel %1.</p>"
+"<p>The number shown on the left of the <img src=\"user|ksysv_stop\"/> "
+"icon determines the order in which the services are stopped. You can arrange "
+"them via drag and drop, as long as a suitable <em>sorting number</em> "
+"can be generated.</p>"
+"<p>If that's not possible, you have to change the number manually via the "
+"<strong>Properties dialog box</strong>.</p>"
+msgstr ""
+"<p>這是在啟動層級 %1 所<strong>停止</strong> 的服務.</p>"
+"<p>在<img src=\"user|ksysv_stop\"/>圖示左邊的編號決定了服務停止的順序. 您可以經由拖放來排序, 如此適當的<em>"
+"排列編號</em>會被產生.</p>"
+"<p>如果沒有適當的產生, 您可以經由在<strong>內容對話方塊</strong>中手動改變編號.</p>"
+
+#: OldView.cpp:353
+#, c-format
+msgid ""
+"Drag here to start services\n"
+"when entering runlevel %1"
+msgstr ""
+"將進入啟動層級 %1 時要啟動的\n"
+"服務拖放到這兒"
+
+#: OldView.cpp:355
+#, c-format
+msgid ""
+"Drag here to stop services\n"
+"when entering runlevel %1"
+msgstr ""
+"將進入啟動層級 %1 時要停止的\n"
+"服務拖放到這兒"
+
+#: OldView.cpp:414
+msgid "The services available on your computer"
+msgstr "您電腦上可用的服務"
+
+#: OldView.cpp:474
+msgid "<vip>WRITING CONFIGURATION</vip>"
+msgstr "<vip>寫入組態設定中</vip>"
+
+#: OldView.cpp:475
+msgid "** WRITING CONFIGURATION **"
+msgstr "** 寫入組態設定中 **"
+
+#: OldView.cpp:479
+msgid "<rl>RUNLEVEL %1</rl>"
+msgstr "<rl>執行層級 %1</rl>"
+
+#: OldView.cpp:480
+msgid "** RUNLEVEL %1 **"
+msgstr "** 執行層級 %1 **"
+
+#: OldView.cpp:616
+msgid "** <stop>Stopping</stop> <cmd>%1</cmd> **<br/>"
+msgstr "** <stop>停止</stop> <cmd>%1</cmd> 中 **<br/>"
+
+#: OldView.cpp:617
+msgid "** Stopping %1 **"
+msgstr "** 停止 %1 中 **"
+
+#: OldView.cpp:622
+msgid " stop"
+msgstr " 停止"
+
+#: OldView.cpp:642
+msgid "** <start>Starting</start> <cmd>%1</cmd> **<br/>"
+msgstr "** <start>啟動</start> <cmd>%1</cmd> 中 **<br/>"
+
+#: OldView.cpp:643
+msgid "** Starting %1 **"
+msgstr "** 啟動 %1 中 **"
+
+#: OldView.cpp:648
+msgid " start"
+msgstr " 啟動"
+
+#: OldView.cpp:682
+msgid "** Re-starting <cmd>%1</cmd> **</br>"
+msgstr "** 重新啟動 <cmd>%1</cmd> 中 **</br>"
+
+#: OldView.cpp:683
+msgid "** Re-starting %1 **"
+msgstr "** 重新啟動 %1 中 **"
+
+#: OldView.cpp:688
+msgid " restart"
+msgstr " 重新啟動"
+
+#: OldView.cpp:937
+msgid ""
+"<p>You have specified that your system's init scripts are located in the folder "
+"<tt><b>%1</b></tt>, but this folder does not exist. You probably selected the "
+"wrong distribution during configuration.</p> "
+"<p>If you reconfigure %2, it may be possible to fix the problem. If you choose "
+"to reconfigure, you should shut down the application and the configuration "
+"wizard will appear the next time %3 is run. If you choose not to reconfigure, "
+"you will not be able to view or edit your system's init configuration.</p>"
+"<p>Would you like to reconfigure %4?</p>"
+msgstr ""
+"<p>你剛才將你系統的啟動 scrpit 目錄指定到 <tt><b>%1</b></tt>,但這個目錄並不存在。你可能在設定時選擇了錯誤的版本。</p> "
+"<p>如果你重新設定 %2,或許就可以修正這個錯誤。如果你選擇要重新設定，你應該將這個程式關掉, 這樣組態設定精靈就會在下一次 %3 "
+"啟動時執行。如果你選擇不要重新設定組態，你將無法檢視或是編輯你系統啟動時的設定。</p> "
+"<p>你願意重新設定 %4 ?</p>"
+
+#: OldView.cpp:954
+msgid "Folder Does Not Exist"
+msgstr "目錄不存在"
+
+#: OldView.cpp:954
+msgid "Reconfigure"
+msgstr "重新設定"
+
+#: OldView.cpp:954
+msgid "Do Not Reconfigure"
+msgstr "不要重新設定"
+
+#: OldView.cpp:965
+msgid ""
+"<p>You do not have the right permissions to edit your system's init "
+"configuration. However, you are free to browse the runlevels.</p>"
+"<p>If you really want to edit the configuration, either <strong>restart</strong> "
+"%1 <strong>as root</strong> (or another privileged user), or ask your sysadmin "
+"to install %2 <em>suid</em> or <em>sgid</em>.</p>"
+"<p>The latter way is not recommended though, due to security issues.</p>"
+msgstr ""
+"<p>抱歉, 您沒有足夠的權限可以編輯您系統的啟動組態.然而, 您可以瀏覽這個啟動層級.</p>"
+"<p>如果您比較希望編輯這個組態, 您可以<strong>用 root 的身分重新啟動</strong> "
+"%1 (或使用一個具有較多權限的使用者), 或要求您的系統管理者以 <em>suid</em> 或 <em>sgid</em> 模式安裝 %2.</p>"
+"<p>但因為安全的因素, 不建議後者.</p>"
+
+#: OldView.cpp:977
+msgid "Insufficient Permissions"
+msgstr "沒有足夠的權限"
+
+#: OldView.cpp:1029
+msgid "&Other..."
+msgstr "其他 (&O)..."
+
+#. i18n: file lookandfeelconfig.ui line 18
+#: PreferencesDialog.cpp:41 rc.cpp:111
+#, no-c-format
+msgid "Look & Feel"
+msgstr "外觀感覺"
+
+#. i18n: file configwizard.ui line 301
+#: PreferencesDialog.cpp:69 rc.cpp:75
+#, no-c-format
+msgid "Paths"
+msgstr "路徑"
+
+#: PreferencesDialog.cpp:79
+msgid "Settings Not Fitting Anywhere Else"
+msgstr "設定不用在任何其他地方"
+
+#: PreferencesDialog.cpp:143
+msgid ""
+"The service folder you specified does not exist.\n"
+"You can continue if you want to, or you can click Cancel to select a new "
+"folder."
+msgstr ""
+"您指定的服務目錄不存在.\n"
+"如果您希望, 您可以繼續; 或選擇放棄以選擇新的目錄."
+
+#: PreferencesDialog.cpp:154
+msgid ""
+"The runlevel folder you specified does not exist.\n"
+"You can continue if you want to, or you can click Cancel to select a new "
+"folder."
+msgstr ""
+"您指定的啟動層級不存在.\n"
+"如果您希望, 您可以繼續; 或選擇放棄以選擇新的目錄."
+
+#: Properties.cpp:42
+msgid "&Service"
+msgstr "服務 (&S)"
+
+#: Properties.cpp:50
+msgid "Description:"
+msgstr "描述說明:"
+
+#: Properties.cpp:57
+msgid "Actions"
+msgstr "動作"
+
+#: Properties.cpp:67
+msgid "S&top"
+msgstr "停止 (&T)"
+
+#: Properties.cpp:70
+msgid "&Restart"
+msgstr "重新啟動 (&R)"
+
+#: Properties.cpp:121
+msgid "&Entry"
+msgstr "項目 (&E)"
+
+#: Properties.cpp:126
+msgid "&Name:"
+msgstr "名稱 (&N):"
+
+#: Properties.cpp:131
+msgid "&Points to service:"
+msgstr "指向服務 (&P):"
+
+#: Properties.cpp:137
+msgid "&Sorting number:"
+msgstr "排序編號 (&S):"
+
+#: RunlevelAuthIcon.cpp:27
+msgid "Editing disabled - please check your permissions"
+msgstr "編輯被關閉 - 請檢查您的權限"
+
+#: RunlevelAuthIcon.cpp:28
+msgid "Editing enabled"
+msgstr "編輯已啟動"
+
+#: TopWidget.cpp:118
+msgid "Start Service"
+msgstr "啟動服務"
+
+#: TopWidget.cpp:119
+msgid "&Choose which service to start:"
+msgstr "選擇要啟動的服務 (&C):"
+
+#: TopWidget.cpp:121
+msgid "Stop Service"
+msgstr "停止服務"
+
+#: TopWidget.cpp:122
+msgid "&Choose which service to stop:"
+msgstr "選擇要停止的服務 (&C):"
+
+#: TopWidget.cpp:124
+msgid "Restart Service"
+msgstr "重新啟動服務"
+
+#: TopWidget.cpp:125
+msgid "&Choose which service to restart:"
+msgstr "選擇要重新啟動的服務 (&C):"
+
+#: TopWidget.cpp:127
+msgid "Edit Service"
+msgstr "編輯服務"
+
+#: TopWidget.cpp:128
+msgid "&Choose which service to edit:"
+msgstr "選擇要編輯的服務 (&C):"
+
+#: TopWidget.cpp:215
+msgid "Re&vert Configuration"
+msgstr "復原組態(&V)"
+
+#: TopWidget.cpp:221
+msgid "&Save Configuration"
+msgstr "儲存組態(&S)"
+
+#: TopWidget.cpp:226
+msgid "Save &Log..."
+msgstr "儲存紀錄 (&L)..."
+
+#: TopWidget.cpp:234
+msgid "&Print Log..."
+msgstr "列印紀錄 (&P)..."
+
+#: TopWidget.cpp:250
+msgid "P&roperties"
+msgstr "內容 (&R)"
+
+#: TopWidget.cpp:254
+msgid "&Open"
+msgstr "開啟 (&O)"
+
+#: TopWidget.cpp:258
+msgid "Open &With"
+msgstr "以...開啟 (&W)"
+
+#: TopWidget.cpp:267
+msgid "Show &Log"
+msgstr "顯示紀錄 (&L)"
+
+#: TopWidget.cpp:270
+msgid "Hide &Log"
+msgstr "隱藏紀錄(&L)"
+
+#: TopWidget.cpp:273
+msgid "&Start Service..."
+msgstr "啟動服務 (&S)..."
+
+#: TopWidget.cpp:277
+msgid "&Stop Service..."
+msgstr "停止服務 (&S)..."
+
+#: TopWidget.cpp:281
+msgid "&Restart Service..."
+msgstr "重新啟動服務 (&R)..."
+
+#: TopWidget.cpp:285
+msgid "&Edit Service..."
+msgstr "編輯服務 (&E)..."
+
+#: TopWidget.cpp:299
+msgid "There are unsaved changes. Are you sure you want to quit?"
+msgstr "有未儲存的變更. 您是否確定要離開?"
+
+#: TopWidget.cpp:313
+msgid "Do you really want to revert all unsaved changes?"
+msgstr "您是否確定要復原所有未儲存的變更?"
+
+#: TopWidget.cpp:314
+msgid "Revert Configuration"
+msgstr "復原組態"
+
+#: TopWidget.cpp:315
+msgid "&Revert"
+msgstr "復原 (&R)"
+
+#: TopWidget.cpp:326
+msgid ""
+"You're about to save the changes made to your init configuration. Wrong "
+"settings can make your system hang on startup.\n"
+"Do you wish to continue?"
+msgstr "您正要儲存您對啟動程式的變更.請認知錯誤的設定可以造成您系統啟動無法完成.您是否要繼續?"
+
+#: TopWidget.cpp:330
+msgid "Save Configuration"
+msgstr "儲存組態"
+
+#: TopWidget.cpp:398
+msgid ""
+"<p>Click on the checkboxes to <strong>show</strong> or <strong>hide</strong> "
+"runlevels.</p> "
+"<p>The list of currently visible runlevels is saved when you use the <strong>"
+"Save Options command</strong>.</p>"
+msgstr ""
+"<p>在方塊中點選以<strong>顯示</strong>或<strong>隱藏</strong>啟動層級.</p>"
+"<p>目前可見的執行層級列表會在您使用<strong>儲存選項</strong>時被儲存.</p>"
+
+#: TopWidget.cpp:402
+msgid "Show only the selected runlevels"
+msgstr "只顯示選擇的執行層級"
+
+#: TopWidget.cpp:404
+msgid "Show runlevels:"
+msgstr " 顯示啟動層級:"
+
+#: TopWidget.cpp:422
+msgid ""
+"<p>If the lock is closed <img src=\"user|ksysv_locked\"/>"
+", you don't have the right <strong>permissions</strong> "
+"to edit the init configuration.</p>"
+"<p>Either restart %1 as root (or another more privileged user), or ask your "
+"sysadmin to install %1 <em>suid</em> or <em>sgid</em>.</p>"
+"<p>The latter way is <strong>not</strong> recommended though, due to security "
+"issues.</p>"
+msgstr ""
+"<p>當鎖定被關閉<img src=\"user|ksysv_locked\"/>, 您不能得到正確的<strong>權限</strong>"
+"來編輯啟動組態.</p>"
+"<p>重新以 root 啟動 %1 (或是以一個擁有比較多權限的使用者) 或要求您的系統管理者以 <em>suid</em> 或 <em>sgid</em>"
+"安裝 %1.</p>"
+"<p>但因為安全的因素, <strong>不建議</strong>後者.</p>"
+
+#: TopWidget.cpp:566
+msgid " Changed"
+msgstr " 已改變"
+
+#: TopWidget.cpp:753
+msgid "Print Log File"
+msgstr "列印紀錄檔"
+
+#: TopWidget.cpp:768
+msgid "<h1>KDE Sys-V Init Editor Log</h1>"
+msgstr "<h1>KDE Sys-V 啟動編輯器紀錄</h1>"
+
+#: TopWidget.cpp:778
+msgid "<h3>Printed on %1</h3><br/><br/>"
+msgstr "<h3>列印在 %1</h3><br/><br/>"
+
+#: TopWidget.cpp:830
+msgid ""
+"<p>Unable to generate a valid sorting number for this position. This means that "
+"there was no number available between the two adjacent services, and the "
+"service did not fit in lexically.</p>"
+"<p>Please adjust the sorting numbers manually via the <strong>"
+"Properties dialog box</strong>.</p>"
+msgstr ""
+"<p>抱歉, 無法產生適當的排列號碼給這個位置. 這表示在前後相鄰的服務中沒有可用的編號, 且服務無法符合詞彙.</p>"
+"<p>請使用<strong>內容對話方塊</strong>手動調整排列編號.</p>"
+
+#: TopWidget.cpp:837
+msgid "Unable to Generate Sorting Number"
+msgstr "無法產生排序編號"
+
+#: TopWidget.cpp:841
+msgid "Unable to generate sorting number. Please change manually."
+msgstr "不能生成排序編號. 請手動變更."
+
+#: TopWidget.cpp:1055
+msgid "Configuration package saved successfully."
+msgstr "組態套件儲存成功."
+
+#: TopWidget.cpp:1085
+msgid "Configuration package loaded successfully."
+msgstr "組態套件載入成功."
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Jing-Jong Shyue, Yuan-Chen Cheng"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "shyue@sonoma.com.tw, ycheng@slat.org"
+
+#: ksv_core.cpp:35
+msgid "No description available."
+msgstr "沒有描述存在"
+
+#: ksv_core.cpp:155
+msgid " log files"
+msgstr " 紀錄檔案"
+
+#: ksv_core.cpp:163
+msgid "Saved Init Configurations"
+msgstr "儲存啟動組態"
+
+#: ksvdraglist.cpp:332
+msgid "No."
+msgstr "不。"
+
+#: ksvdraglist.cpp:336
+msgid "Name"
+msgstr "名稱"
+
+#: ksvdraglist.cpp:348 ksvdraglist.cpp:352 ksvdraglist.cpp:355
+msgid "Drag Menu"
+msgstr "拖曳目錄"
+
+#: main.cpp:58
+msgid "SysV-Init Editor"
+msgstr "Sys-V 啟動編輯器"
+
+#: main.cpp:59
+msgid "Editor for Sys-V like init configurations"
+msgstr "一個 Svs-V 樣式啟動組態的編輯器."
+
+#: main.cpp:62
+msgid ""
+"Similar to Red Hat's\"tksysv\", but SysV-Init Editor allows\n"
+"drag-and-drop, as well as keyboard use."
+msgstr ""
+"Sys-V 風格的啟動編輯器,與RedHat公司的 <em>tksysv</em> 相似, 但 <em>Sys-V 啟動編輯器</em>"
+"允許拖放操作,同時也可以使用鍵盤."
+
+#: main.cpp:65
+msgid "Main developer"
+msgstr "主要發展者"
+
+#. i18n: file configwizard.ui line 23
+#: rc.cpp:30
+#, no-c-format
+msgid "Configuration Wizard"
+msgstr "組態精靈"
+
+#. i18n: file configwizard.ui line 39
+#: rc.cpp:33
+#, no-c-format
+msgid "Operating System"
+msgstr "作業系統"
+
+#. i18n: file configwizard.ui line 58
+#: rc.cpp:36
+#, no-c-format
+msgid "<h3>What Operating System do you use?</h3>"
+msgstr "<h3>您使用哪種作業系統?</h3>"
+
+#. i18n: file configwizard.ui line 91
+#: rc.cpp:39
+#, no-c-format
+msgid "Choose Your Operating System"
+msgstr "選擇您的作業系統"
+
+#. i18n: file configwizard.ui line 110
+#: rc.cpp:42
+#, no-c-format
+msgid "&Linux"
+msgstr "&Linux"
+
+#. i18n: file configwizard.ui line 121
+#: rc.cpp:45 rc.cpp:72
+#, no-c-format
+msgid "&Other"
+msgstr "其他 (&O)"
+
+#. i18n: file configwizard.ui line 157
+#: rc.cpp:48
+#, no-c-format
+msgid "Distribution"
+msgstr "散佈版本"
+
+#. i18n: file configwizard.ui line 176
+#: rc.cpp:51
+#, no-c-format
+msgid "Choose Your Distribution"
+msgstr "選擇您的散佈版本"
+
+#. i18n: file configwizard.ui line 195
+#: rc.cpp:54
+#, no-c-format
+msgid "&Debian GNU/Linux"
+msgstr "&Debian GNU/Linux"
+
+#. i18n: file configwizard.ui line 210
+#: rc.cpp:57
+#, no-c-format
+msgid "&Red Hat Linux"
+msgstr "&Red Hat Linux"
+
+#. i18n: file configwizard.ui line 221
+#: rc.cpp:60
+#, no-c-format
+msgid "&SuSE Linux"
+msgstr "&SuSE Linux"
+
+#. i18n: file configwizard.ui line 232
+#: rc.cpp:63
+#, no-c-format
+msgid "&Mandrake Linux"
+msgstr "&Mandrake Linux"
+
+#. i18n: file configwizard.ui line 243
+#: rc.cpp:66
+#, no-c-format
+msgid "&Corel Linux OS"
+msgstr "&Corel Linux OS"
+
+#. i18n: file configwizard.ui line 254
+#: rc.cpp:69
+#, no-c-format
+msgid "Conec&tiva Linux"
+msgstr "Conectiva Linux(&T)"
+
+#. i18n: file configwizard.ui line 341
+#: rc.cpp:78 rc.cpp:211
+#, no-c-format
+msgid "&Service path:"
+msgstr "服務路徑 (&S):"
+
+#. i18n: file configwizard.ui line 389
+#: rc.cpp:81 rc.cpp:214
+#, no-c-format
+msgid "Enter the path to the folder containing the services"
+msgstr "輸入包含服務的資料夾路徑"
+
+#. i18n: file configwizard.ui line 400
+#: rc.cpp:84 rc.cpp:217
+#, no-c-format
+msgid "&Browse..."
+msgstr "瀏覽 (&B)..."
+
+#. i18n: file configwizard.ui line 404
+#: rc.cpp:87 rc.cpp:220
+#, no-c-format
+msgid "Select the folder containing the services"
+msgstr "選定這個資料夾包含服務"
+
+#. i18n: file configwizard.ui line 463
+#: rc.cpp:90 rc.cpp:223
+#, no-c-format
+msgid "&Runlevel path:"
+msgstr "啟動層級路徑 (&R):"
+
+#. i18n: file configwizard.ui line 511
+#: rc.cpp:93 rc.cpp:226
+#, no-c-format
+msgid "Enter the path to the folder containing the runlevel folders"
+msgstr "輸入包含啟動層級的資料夾路徑"
+
+#. i18n: file configwizard.ui line 522
+#: rc.cpp:96 rc.cpp:229
+#, no-c-format
+msgid "Br&owse..."
+msgstr "瀏覽 (&O)..."
+
+#. i18n: file configwizard.ui line 526
+#: rc.cpp:99 rc.cpp:232
+#, no-c-format
+msgid "Select the folder containing the runlevel folders "
+msgstr "選擇放置啟動層級的資料夾路徑"
+
+#. i18n: file configwizard.ui line 564
+#: rc.cpp:102
+#, no-c-format
+msgid "Configuration Complete"
+msgstr "組態設定完成"
+
+#. i18n: file configwizard.ui line 586
+#: rc.cpp:105
+#, no-c-format
+msgid ""
+"<h1>Congratulations!</h1>\n"
+"<p>\n"
+"You have finished the initial configuration of SysV-Init Editor. <b>Press</b> "
+"the button labeled <b>Finish</b> to start editing your init-configuration.\n"
+"</p>"
+msgstr ""
+"<h1>恭喜!</h1>\n"
+"<p>\n"
+"您完成了 Sys-V 啟動編輯器的初始化組態. <b>按下</b>標有<b>完成</b>的按鈕以開始編輯您的啟動組態.\n"
+"</p>"
+
+#. i18n: file lookandfeelconfig.ui line 70
+#: rc.cpp:117
+#, no-c-format
+msgid "C&hoose..."
+msgstr "選擇 (&H)..."
+
+#. i18n: file lookandfeelconfig.ui line 98
+#: rc.cpp:120 rc.cpp:123
+#, no-c-format
+msgid "dummy-font"
+msgstr "基本字型"
+
+#. i18n: file lookandfeelconfig.ui line 134
+#: rc.cpp:126
+#, no-c-format
+msgid "Services:"
+msgstr "服務:"
+
+#. i18n: file lookandfeelconfig.ui line 150
+#: rc.cpp:129
+#, no-c-format
+msgid "Sorting numbers:"
+msgstr "排序編號:"
+
+#. i18n: file lookandfeelconfig.ui line 166
+#: rc.cpp:132
+#, no-c-format
+msgid "&Choose..."
+msgstr "選擇 (&C)..."
+
+#. i18n: file lookandfeelconfig.ui line 203
+#: rc.cpp:135
+#, no-c-format
+msgid "Colors"
+msgstr "顏色"
+
+#. i18n: file lookandfeelconfig.ui line 251
+#: rc.cpp:138 rc.cpp:151 rc.cpp:164 rc.cpp:174
+#, no-c-format
+msgid "Dummy"
+msgstr "基本"
+
+#. i18n: file lookandfeelconfig.ui line 254
+#: rc.cpp:141
+#, no-c-format
+msgid "Choose a color for changed services"
+msgstr "選擇改變服務的顏色"
+
+#. i18n: file lookandfeelconfig.ui line 258
+#: rc.cpp:144
+#, no-c-format
+msgid ""
+"<p>Use the <strong>Select Color dialog box</strong> to pick a text color for "
+"<em>services that have been changed</em> (either order/sorting number or "
+"name).</p>\n"
+"<p>Changed service entries will be distinguished by this color.</p>"
+msgstr ""
+"<p>使用<strong>選擇顏色對話方塊</strong>來選取文字顏色給<em>已變更的服務</em> (改變順序或名稱).</p>\n"
+"<p>已變更的服務將會用這個顏色標示.</p>"
+
+#. i18n: file lookandfeelconfig.ui line 266
+#: rc.cpp:148
+#, no-c-format
+msgid "&Changed:"
+msgstr "改變的 (&C):"
+
+#. i18n: file lookandfeelconfig.ui line 302
+#: rc.cpp:154
+#, no-c-format
+msgid "Choose a color for service new to a runlevel"
+msgstr "選擇新增到執行層級的服務顏色"
+
+#. i18n: file lookandfeelconfig.ui line 306
+#: rc.cpp:157
+#, no-c-format
+msgid ""
+"<p>Use the <strong>Select Color dialog box</strong> to pick a text color for "
+"<em>services new to a runlevel</em>.</p>\n"
+"<p>New service entries will be distinguished by this color.</p>"
+msgstr ""
+"<p>使用<strong>選擇顏色對話方塊</strong>來選取文字顏色給<em>新增到啟動層級的服務</em>.</p>\n"
+"<p>新的服務將會用這個顏色標示.</p>"
+
+#. i18n: file lookandfeelconfig.ui line 314
+#: rc.cpp:161
+#, no-c-format
+msgid "&New:"
+msgstr "新增 (&N):"
+
+#. i18n: file lookandfeelconfig.ui line 350
+#: rc.cpp:167
+#, no-c-format
+msgid "Choose a color for changed services that are selected"
+msgstr "選擇被選取的服務變更後的顏色"
+
+#. i18n: file lookandfeelconfig.ui line 354
+#: rc.cpp:170
+#, no-c-format
+msgid ""
+"<p>Use the <strong>Select Color dialog box</strong> to pick a selected text "
+"color for <em>services that have been changed</em> (either order/sorting number "
+"or name).</p>\n"
+"<p>Changed service entries will be distinguished by this color while they are "
+"selected.</p>"
+msgstr ""
+"<p>使用<strong>選擇顏色對話方塊</strong>來選取一個選定的文字顏色給<em>已變更的服務</em> (改變順序或名稱).</p>\n"
+"<p>已變更的服務被選取時將會用這個顏色標示.</p>"
+
+#. i18n: file lookandfeelconfig.ui line 382
+#: rc.cpp:177
+#, no-c-format
+msgid "Choose a color for services new to a runlevel that are selected"
+msgstr "選擇被選取的服務新增的顏色"
+
+#. i18n: file lookandfeelconfig.ui line 386
+#: rc.cpp:180
+#, no-c-format
+msgid ""
+"<p>Use the <strong>Select Color dialog box</strong> to pick a selected text "
+"color for <em>services new to a runlevel</em>.</p>\n"
+"<p>New service entries will be distinguished by this color while they are "
+"selected.</p>"
+msgstr ""
+"<p>使用<strong>選擇顏色對話方塊</strong>來選取一個選定的文字顏色給<em>新增到啟動層級的服務</em>.</p>\n"
+"<p>新的服務被選取時將會用這個顏色標示.</p>"
+
+#. i18n: file lookandfeelconfig.ui line 394
+#: rc.cpp:184
+#, no-c-format
+msgid "New && &selected:"
+msgstr "新增與選擇的 (&S):"
+
+#. i18n: file lookandfeelconfig.ui line 410
+#: rc.cpp:187
+#, no-c-format
+msgid "Changed && s&elected:"
+msgstr "變更與選擇的 (&E):"
+
+#. i18n: file miscconfig.ui line 38
+#: rc.cpp:193
+#, no-c-format
+msgid "Informational Messages"
+msgstr "資訊訊息"
+
+#. i18n: file miscconfig.ui line 73
+#: rc.cpp:196
+#, no-c-format
+msgid "Show all messages again:"
+msgstr "再次顯示全部訊息:"
+
+#. i18n: file miscconfig.ui line 98
+#: rc.cpp:199
+#, no-c-format
+msgid "&Show All"
+msgstr "顯示全部 (&S)"
+
+#. i18n: file miscconfig.ui line 108
+#: rc.cpp:202
+#, no-c-format
+msgid "&Warn if not allowed to write configuration"
+msgstr "如果無法寫入組態時提出警告 (&W)"
+
+#. i18n: file miscconfig.ui line 116
+#: rc.cpp:205
+#, no-c-format
+msgid "Warn &if unable to generate a sorting number"
+msgstr "如果無法產生排序編號時提出警告"
+
+#. i18n: file pathconfig.ui line 26
+#: rc.cpp:208
+#, no-c-format
+msgid "Path Configuration"
+msgstr "路徑組態"
+
+#: trash.cpp:47 trash.cpp:48
+msgid "Drag here to remove services"
+msgstr "把要移除的服務拖放到這裡"
+
+#~ msgid "Unknown Host"
+#~ msgstr "未知的主機"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/kuser.po b/tde-i18n-zh_TW/messages/kdeadmin/kuser.po
new file mode 100644
index 00000000000..ac5051864f7
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/kuser.po
@@ -0,0 +1,1973 @@
+# translation of kuser.po to Chinese Traditional
+# traditional Chinese translation of kuser
+# Copyright (C) 2001-2002, 2005, 2006 Free Software Foundation, Inc.
+#
+# Translator: Jing-Jong Shyue <shyue@sonoma.com.tw>, 2001.
+#             Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2005.
+# Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kuser\n"
+"POT-Creation-Date: 2008-07-08 01:20+0200\n"
+"PO-Revision-Date: 2006-06-19 09:12+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>\n"
+"Language-Team: Chinese Traditional <zh@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Jing-Jong Shyue,Chao-Hsiung Liao,Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+"shyue@sonoma.com.tw,pesder.liao@msa.hinet.net,franklin at goodhorse dot idv dot "
+"tw"
+
+#: addUser.cpp:45
+msgid "New Account Options"
+msgstr "新帳號選項"
+
+#. i18n: file generalsettings.ui line 142
+#: addUser.cpp:49 rc.cpp:72 rc.cpp:264
+#, no-c-format
+msgid "Create home folder"
+msgstr "建立家目錄"
+
+#: addUser.cpp:51
+msgid "Copy skeleton"
+msgstr "複製架構"
+
+#: addUser.cpp:68
+msgid "User with UID %1 already exists."
+msgstr "UID %1 已被使用。"
+
+#: addUser.cpp:75
+msgid "User with RID %1 already exists."
+msgstr "RID %1 已被使用。"
+
+#: addUser.cpp:117
+msgid ""
+"Folder %1 already exists!\n"
+"%2 may become owner and permissions may change.\n"
+"Do you really want to use %3?"
+msgstr ""
+"目錄 %1 已經存在！\n"
+"%2 可能成為擁有者而權限可能變更。\n"
+"您真的要使用 %3 ？"
+
+#: addUser.cpp:124
+msgid "%1 is not a folder."
+msgstr "%1 不是一個目錄。"
+
+#: addUser.cpp:126 addUser.cpp:154
+#, c-format
+msgid "stat() failed on %1."
+msgstr "stat() 於 %1 執行失敗。"
+
+#: addUser.cpp:147
+msgid "Mailbox %1 already exists (uid=%2)."
+msgstr "信箱 %1 已經存在 (uid=%2)。"
+
+#: addUser.cpp:151
+msgid "%1 exists but is not a regular file."
+msgstr "%1 已經存在，但不是一般的檔案。"
+
+#: delUser.cpp:28
+msgid "Delete User"
+msgstr "刪除使用者"
+
+#: delUser.cpp:32
+msgid "<p>Deleting user <b>%1</b><p>Also perform the following actions:"
+msgstr "<p>正在刪除使用者<b>%1</b><p>同時進行下列動作："
+
+#: delUser.cpp:35
+#, c-format
+msgid "Delete &home folder: %1"
+msgstr "刪除家目錄(&H)： %1"
+
+#: delUser.cpp:37
+#, c-format
+msgid "Delete &mailbox: %1"
+msgstr "刪除信箱(&M)： %1"
+
+#: editDefaults.cpp:48 propdlg.cpp:151
+msgid "<Empty>"
+msgstr "<空>"
+
+#: editDefaults.cpp:50 editDefaults.cpp:73
+msgid "Connection"
+msgstr "連線"
+
+#: editDefaults.cpp:52
+msgid "Password Policy"
+msgstr "密碼原則"
+
+#: editDefaults.cpp:53
+msgid "General"
+msgstr "一般"
+
+#: editDefaults.cpp:53
+msgid "General Settings"
+msgstr "一般設定"
+
+#: editDefaults.cpp:56
+msgid "File Source Settings"
+msgstr "檔案來源設定"
+
+#: editDefaults.cpp:76
+msgid "Settings"
+msgstr "設定"
+
+#. i18n: file ldapsamba.ui line 24
+#: editDefaults.cpp:80 propdlg.cpp:267 rc.cpp:84
+#, no-c-format
+msgid "Samba"
+msgstr "Samba"
+
+#. i18n: file generalsettings.ui line 46
+#: editDefaults.cpp:81 rc.cpp:54
+#, no-c-format
+msgid "LDAP"
+msgstr "LDAP"
+
+#: editDefaults.cpp:81
+msgid "LDAP Source Settings"
+msgstr "LDAP 來源設定"
+
+#: editDefaults.cpp:115
+msgid "LDAP Query"
+msgstr "LDAP 查詢"
+
+#: editGroup.cpp:39
+msgid "Group Properties"
+msgstr "群組屬性"
+
+#: editGroup.cpp:49
+msgid "Domain Admins"
+msgstr "網域管理者"
+
+#: editGroup.cpp:49
+msgid "Admins"
+msgstr "管理者"
+
+#: editGroup.cpp:50
+msgid "Domain Users"
+msgstr "網域使用者"
+
+#: editGroup.cpp:50 mainView.cpp:50
+msgid "Users"
+msgstr "使用者"
+
+#: editGroup.cpp:51
+msgid "Domain Guests"
+msgstr "網域訪客"
+
+#: editGroup.cpp:51
+msgid "Guests"
+msgstr "訪客"
+
+#: editGroup.cpp:58
+msgid "Group number:"
+msgstr "群組號碼："
+
+#: editGroup.cpp:72
+msgid "Group rid:"
+msgstr "群組 RID："
+
+#: editGroup.cpp:90
+msgid "Group name:"
+msgstr "群組名稱："
+
+#: editGroup.cpp:104
+msgid "Description:"
+msgstr "描述："
+
+#: editGroup.cpp:113
+msgid "Display name:"
+msgstr "顯示名稱："
+
+#: editGroup.cpp:122
+msgid "Type:"
+msgstr "型態："
+
+#: editGroup.cpp:124 kgroupvw.cpp:69
+msgid "Domain"
+msgstr "網域"
+
+#: editGroup.cpp:125 kgroupvw.cpp:70
+msgid "Local"
+msgstr "本地端"
+
+#: editGroup.cpp:126 kgroupvw.cpp:71
+msgid "Builtin"
+msgstr "內建"
+
+#: editGroup.cpp:143 propdlg.cpp:309
+msgid "Domain SID:"
+msgstr "網域 SID："
+
+#: editGroup.cpp:151
+msgid "Disable Samba group information"
+msgstr "關掉 Samba 群組資訊"
+
+#: editGroup.cpp:163
+msgid "Users in Group"
+msgstr "使用者在群組"
+
+#: editGroup.cpp:168
+msgid "Add <-"
+msgstr "新增 <-"
+
+#: editGroup.cpp:169
+msgid "Remove ->"
+msgstr "移除 ->"
+
+#: editGroup.cpp:174
+msgid "Users NOT in Group"
+msgstr "使用者不在群組"
+
+#: editGroup.cpp:269
+msgid "You need to type a group name."
+msgstr "您需要輸入群組名稱"
+
+#: editGroup.cpp:277
+msgid "Group with name %1 already exists."
+msgstr "群組 %1 已經存在。"
+
+#: editGroup.cpp:284
+msgid "Group with SID %1 already exists."
+msgstr "群組 SID %1 已經存在。"
+
+#: editGroup.cpp:289
+msgid "Group with gid %1 already exists."
+msgstr "群組 GID %1 已經存在。"
+
+#: kgroupfiles.cpp:97
+msgid ""
+"stat call on file %1 failed: %2\n"
+"Check KUser settings."
+msgstr ""
+"呼叫檔案 %1 狀態失敗： %2\n"
+"請檢查 KUser 設定。"
+
+#: kgroupfiles.cpp:124 kuserfiles.cpp:158 kuserfiles.cpp:241
+msgid "Error opening %1 for reading."
+msgstr "開啟 %1 讀取時錯誤。"
+
+#: kgroupfiles.cpp:236 kgroupfiles.cpp:243 kgroupfiles.cpp:251
+#: kuserfiles.cpp:346 kuserfiles.cpp:352 kuserfiles.cpp:526
+msgid "Error opening %1 for writing."
+msgstr "開啟 %1 寫入時錯誤。"
+
+#: kgroupfiles.cpp:357
+msgid ""
+"Unable to process NIS group file without a minimum GID specified.\n"
+"Please update KUser settings (File Source Settings)."
+msgstr ""
+"沒有指定最低限度的 GID 無法處理 NIS 群組檔案。\n"
+"請更新 KUser 設定（檔案來源）。"
+
+#: kgroupfiles.cpp:361
+msgid ""
+"Specifying NIS minimum GID requires NIS file(s).\n"
+"Please update KUser settings (File Source Settings)."
+msgstr ""
+"指定 NIS 最小時 GID 需要 NIS 檔案。\n"
+"請更新 KUser 設定（檔案來源）。"
+
+#: kgroupfiles.cpp:367
+msgid "Unable to build NIS group databases."
+msgstr "無法建立 NIS 群組資料庫。"
+
+#: kgroupldap.cpp:164
+msgid "Loading Groups From LDAP"
+msgstr "從 LDAP 載入群組"
+
+#: kgroupldap.cpp:194 kuserldap.cpp:611
+msgid "LDAP Operation"
+msgstr "LDAP 運作"
+
+#: kgroupvw.cpp:72
+msgid "Unknown"
+msgstr "未知"
+
+#: kgroupvw.cpp:124
+msgid "GID"
+msgstr "GID"
+
+#: kgroupvw.cpp:126
+msgid "Group Name"
+msgstr "群組名稱"
+
+#: kgroupvw.cpp:129 kuservw.cpp:129
+msgid "Domain SID"
+msgstr "網域 SID"
+
+#: kgroupvw.cpp:130 kuservw.cpp:130
+msgid "RID"
+msgstr "RID"
+
+#: kgroupvw.cpp:131
+msgid "Type"
+msgstr "型態"
+
+#: kgroupvw.cpp:132
+msgid "Display Name"
+msgstr "顯示名稱"
+
+#: kgroupvw.cpp:133
+msgid "Description"
+msgstr "描述"
+
+#: kuser.cpp:551
+msgid "Cannot create home folder for %1: it is null or empty."
+msgstr "不能建立 %1 的家目錄：它可能是 null 或空的。"
+
+#: kuser.cpp:557
+msgid ""
+"Cannot create home folder %1.\n"
+"Error: %2"
+msgstr ""
+"無法建立家目錄 %1。\n"
+"錯誤： %2"
+
+#: kuser.cpp:563
+msgid ""
+"Cannot change owner of home folder %1.\n"
+"Error: %2"
+msgstr ""
+"無法改變家目錄 %1 的擁有者。\n"
+"錯誤： %2"
+
+#: kuser.cpp:568
+msgid ""
+"Cannot change permissions on home folder %1.\n"
+"Error: %2"
+msgstr ""
+"無法改變家目錄 %1 的權限。\n"
+"錯誤： %2"
+
+#: kuser.cpp:583
+msgid ""
+"Folder %1 already exists!\n"
+"Will make %2 owner and change permissions.\n"
+"Do you want to continue?"
+msgstr ""
+"目錄 %1 已經存在了！\n"
+"接下來會將該目錄權限與擁有者換成 %2。\n"
+"您確定繼續嗎？"
+
+#: kuser.cpp:587 kuser.cpp:605
+msgid ""
+"Cannot change owner of %1 folder.\n"
+"Error: %2"
+msgstr ""
+"無法改變目錄 %1 的擁有者。\n"
+"錯誤： %2"
+
+#: kuser.cpp:591
+msgid ""
+"Folder %1 left 'as is'.\n"
+"Verify ownership and permissions for user %2 who may not be able to log in!"
+msgstr ""
+"保持目錄 %1 不變。\n"
+"請驗證無法登入的使用者 %2 的所有權與權限！"
+
+#: kuser.cpp:595
+msgid "%1 exists and is not a folder. User %2 will not be able to log in!"
+msgstr "%1 已經存在了，但是卻不是目錄。使用者 %2 將會無法正常登入！"
+
+#: kuser.cpp:601
+msgid ""
+"Cannot create %1 folder.\n"
+"Error: %2"
+msgstr ""
+"無法建立 %1 目錄。\n"
+"錯誤： %2"
+
+#: kuser.cpp:609
+msgid ""
+"stat call on %1 failed.\n"
+"Error: %2"
+msgstr ""
+"取得 %1 狀態呼叫失敗。\n"
+"錯誤： %2"
+
+#: kuser.cpp:624
+msgid "Cannot create %1: %2"
+msgstr "無法建立 %1： %2"
+
+#: kuser.cpp:634
+msgid ""
+"Cannot change owner on mailbox: %1\n"
+"Error: %2"
+msgstr ""
+"無法改變郵件信箱 %1 之擁有者\n"
+"錯誤： %2"
+
+#: kuser.cpp:640
+msgid ""
+"Cannot change permissions on mailbox: %1\n"
+"Error: %2"
+msgstr ""
+"無法改變郵件信箱 %1 之權限\n"
+"錯誤： %2"
+
+#: kuser.cpp:685
+msgid ""
+"Error creating symlink %1.\n"
+"Error: %2"
+msgstr ""
+"無法建立符號連結 %1。\n"
+"錯誤： %2"
+
+#: kuser.cpp:695
+msgid ""
+"Cannot change owner of folder %1.\n"
+"Error: %2"
+msgstr ""
+"無法改變目錄 %1 之擁有者。\n"
+"錯誤： %2"
+
+#: kuser.cpp:700
+msgid ""
+"Cannot change permissions on folder %1.\n"
+"Error: %2"
+msgstr ""
+"無法改變目錄 %1 之權限。\n"
+"錯誤： %2"
+
+#: kuser.cpp:710
+msgid ""
+"Cannot change owner of file %1.\n"
+"Error: %2"
+msgstr ""
+"無法改變檔案 %1 之擁有者。\n"
+"錯誤： %2"
+
+#: kuser.cpp:715
+msgid ""
+"Cannot change permissions on file %1.\n"
+"Error: %2"
+msgstr ""
+"無法改變檔案 %1 之權限。\n"
+"錯誤： %2"
+
+#: kuser.cpp:729
+msgid "Folder %1 does not exist, cannot copy skeleton for %2."
+msgstr "目錄 %1 不存在，不能複製 %2 的架構。"
+
+#: kuser.cpp:734
+msgid "Folder %1 does not exist, cannot copy skeleton."
+msgstr "目錄 %1 不存在，不能複製架構。"
+
+#: kuser.cpp:752
+msgid ""
+"Cannot remove home folder %1.\n"
+"Error: %2"
+msgstr ""
+"無法移除家目錄 %1。\n"
+"錯誤： %2"
+
+#: kuser.cpp:756
+msgid "Removal of home folder %1 failed (uid = %2, gid = %3)."
+msgstr "刪除 %1 家目錄失敗 (uid = %2, gid = %3)。"
+
+#: kuser.cpp:759
+msgid ""
+"stat call on file %1 failed.\n"
+"Error: %2"
+msgstr ""
+"取得 %1 檔案狀態失敗。\n"
+"錯誤： %2"
+
+#: kuser.cpp:777
+msgid ""
+"Cannot remove crontab %1.\n"
+"Error: %2"
+msgstr ""
+"無法移除 crontab %1。\n"
+"錯誤： %2"
+
+#: kuser.cpp:791
+msgid ""
+"Cannot remove mailbox %1.\n"
+"Error: %2"
+msgstr ""
+"無法移除信箱 %1。\n"
+"錯誤： %2"
+
+#: kuser.cpp:811
+#, c-format
+msgid "Cannot fork while trying to kill processes for uid %1."
+msgstr "刪除 uid %1 的行程時 fork 失敗。"
+
+#: kuserfiles.cpp:118
+msgid ""
+"KUser sources were not configured.\n"
+"Local passwd source set to %1\n"
+"Local group source set to %2."
+msgstr ""
+"KUser 檔案來源尚未設定。\n"
+"本地端密碼來源指向到 %1\n"
+"本地端群組來源指向到 %2。"
+
+#: kuserfiles.cpp:131
+msgid ""
+"Stat call on file %1 failed: %2\n"
+"Check KUser settings."
+msgstr ""
+"呼叫檔案 %1 狀態失敗： %2\n"
+"請檢查 KUser 設定。"
+
+#: kuserfiles.cpp:253
+msgid ""
+"No /etc/passwd entry for %1.\n"
+"Entry will be removed at the next `Save'-operation."
+msgstr ""
+"%1 在 /etc/passwd 中沒有紀錄。\n"
+"下一個「儲存」動作會將此項目徹底移除。"
+
+#: kuserfiles.cpp:475
+msgid ""
+"Unable to process NIS passwd file without a minimum UID specified.\n"
+"Please update KUser settings (Files)."
+msgstr ""
+"沒有指定最小 UID 無法產生 NIS 密碼檔案。\n"
+"請更新 KUser 設定（檔案）。"
+
+#: kuserfiles.cpp:479
+msgid ""
+"Specifying NIS minimum UID requires NIS file(s).\n"
+"Please update KUser settings (Files)."
+msgstr ""
+"指定 NIS 最小 UID 編號需要 NIS 檔案。\n"
+"請更新 KUser 設定（檔案）。"
+
+#: kuserfiles.cpp:486
+msgid "Unable to build password database."
+msgstr "無法建立密碼資料庫。"
+
+#: kuserfiles.cpp:492
+msgid "Unable to build password databases."
+msgstr "無法建立密碼資料庫。"
+
+#: kuserldap.cpp:243
+msgid "Loading Users From LDAP"
+msgstr "從 LDAP 載入使用者設定"
+
+#: kuservw.cpp:120
+msgid "UID"
+msgstr "UID"
+
+#: kuservw.cpp:122
+msgid "User Login"
+msgstr "使用者登入"
+
+#: kuservw.cpp:123
+msgid "Full Name"
+msgstr "全名"
+
+#: kuservw.cpp:124
+msgid "Home Directory"
+msgstr "家目錄"
+
+#: kuservw.cpp:125
+msgid "Login Shell"
+msgstr "登入 Shell"
+
+#: kuservw.cpp:131
+msgid "Samba Login Script"
+msgstr "Samba 登入命令稿"
+
+#: kuservw.cpp:132
+msgid "Samba Profile Path"
+msgstr "Samba 設定路徑"
+
+#: kuservw.cpp:133
+msgid "Samba Home Drive"
+msgstr "Samba 家磁碟機"
+
+#: kuservw.cpp:134
+msgid "Samba Home Path"
+msgstr "Samba 家路徑"
+
+#: main.cpp:36
+msgid "KDE User Editor"
+msgstr "KDE 使用者編輯器"
+
+#: main.cpp:43
+msgid "KUser"
+msgstr "KUser"
+
+#: main.cpp:46 main.cpp:48
+msgid "kuser author"
+msgstr "kuser 作者"
+
+#: main.cpp:61
+msgid "KDE User Manager"
+msgstr "KDE 使用者管理員"
+
+#: mainView.cpp:53 propdlg.cpp:320 propdlg.cpp:325
+msgid "Groups"
+msgstr "群組"
+
+#: mainView.cpp:166
+msgid ""
+"You are using private groups.\n"
+"Do you want to delete the user's private group '%1'?"
+msgstr ""
+"您正在使用私人群組。\n"
+"您想要刪除使用者的私人群組 %1？"
+
+#: mainView.cpp:169
+msgid "Do Not Delete"
+msgstr "不要刪除"
+
+#: mainView.cpp:188
+msgid "You have run out of uid space."
+msgstr "驚死人！您已經用掉所有可用的 uid！"
+
+#: mainView.cpp:200
+msgid "Please type the name of the new user:"
+msgstr "請輸入新使用者名稱："
+
+#: mainView.cpp:206
+msgid "User with name %1 already exists."
+msgstr "以 %1 為名的使用者已經存在。"
+
+#: mainView.cpp:307
+msgid ""
+"You have selected %1 users. Do you really want to change the password for all "
+"the selected users?"
+msgstr "您已經選擇 %1 個使用者。您確定要變更這些使用者的密碼嗎？"
+
+#: mainView.cpp:308 propdlg.cpp:510
+msgid "Do Not Change"
+msgstr "不要變更"
+
+#: mainView.cpp:396
+msgid "You have run out of gid space."
+msgstr "驚死人！您已經用掉所有可用的 gid！"
+
+#: mainView.cpp:447
+msgid ""
+"The group '%1' is the primary group of one or more users (such as '%2'); it "
+"cannot be deleted."
+msgstr "群組 %1 有一個以上的使用者（如 %2）使用中，無法刪除。"
+
+#: mainView.cpp:460
+msgid "Do you really want to delete the group '%1'?"
+msgstr "您真的要刪除群組 %1 ？"
+
+#: mainView.cpp:465
+msgid "Do you really want to delete the %1 selected groups?"
+msgstr "您真的要刪除這 %1 個選擇的群組？"
+
+#: mainWidget.cpp:50
+msgid "Reading configuration"
+msgstr "讀取組態"
+
+#: mainWidget.cpp:56
+msgid "Ready"
+msgstr "設定完成"
+
+#: mainWidget.cpp:78 mainWidget.cpp:90
+msgid "&Add..."
+msgstr "增加(&A)..."
+
+#: mainWidget.cpp:81 mainWidget.cpp:93
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#: mainWidget.cpp:84
+msgid "&Delete..."
+msgstr "刪除(&D)..."
+
+#: mainWidget.cpp:87
+msgid "&Set Password..."
+msgstr "設定密碼(&S)..."
+
+#: mainWidget.cpp:104
+msgid "&Select Connection..."
+msgstr "設定連線(&S)..."
+
+#: mainWidget.cpp:108
+msgid "Show System Users/Groups"
+msgstr "顯示系統使用者/群組"
+
+#: mainWidget.cpp:111
+msgid "Hide System Users/Groups"
+msgstr "隱藏系統使用者/群組"
+
+#: misc.cpp:46
+#, c-format
+msgid "Can't create backup file for %1"
+msgstr "不能為 %1 建立備份檔案"
+
+#: misc.cpp:71
+msgid "File %1 does not exist."
+msgstr "檔案 %1 不存在。"
+
+#: misc.cpp:76
+msgid "Cannot open file %1 for reading."
+msgstr "不能開啟要讀取的檔案 %1 。"
+
+#: misc.cpp:81
+msgid "Cannot open file %1 for writing."
+msgstr "不能開啟要寫入的檔案 %1 。"
+
+#: propdlg.cpp:60 propdlg.cpp:91
+msgid "Do not change"
+msgstr "不要變更"
+
+#. i18n: file passwordpolicy.ui line 82
+#: propdlg.cpp:76 rc.cpp:198 rc.cpp:204 rc.cpp:213 rc.cpp:219
+#, no-c-format
+msgid " days"
+msgstr " 天"
+
+#. i18n: file passwordpolicy.ui line 85
+#: propdlg.cpp:81 propdlg.cpp:257 rc.cpp:201 rc.cpp:207 rc.cpp:216 rc.cpp:225
+#, no-c-format
+msgid "Never"
+msgstr "永不"
+
+#: propdlg.cpp:107
+msgid "User Info"
+msgstr "使用者資訊"
+
+#: propdlg.cpp:116
+msgid "User login:"
+msgstr "使用者登入："
+
+#: propdlg.cpp:121
+msgid "&User ID:"
+msgstr "使用者 ID(&U)："
+
+#: propdlg.cpp:125
+msgid "Set &Password..."
+msgstr "設定密碼(&P)..."
+
+#: propdlg.cpp:133
+msgid "Full &name:"
+msgstr "全名(&N)："
+
+#: propdlg.cpp:140
+msgid "Surname:"
+msgstr "姓氏："
+
+#: propdlg.cpp:145
+msgid "Email address:"
+msgstr "電子郵件地址："
+
+#: propdlg.cpp:159
+msgid "&Login shell:"
+msgstr "登入 Shell(&L)："
+
+#: propdlg.cpp:164
+msgid "&Home folder:"
+msgstr "家目錄(&H)："
+
+#: propdlg.cpp:172
+msgid "&Office:"
+msgstr "辦公室(&O)："
+
+#: propdlg.cpp:177
+msgid "Offi&ce Phone:"
+msgstr "辦公室電話(&C)："
+
+#: propdlg.cpp:182
+msgid "Ho&me Phone:"
+msgstr "住家電話(&M)："
+
+#: propdlg.cpp:187
+msgid "Login class:"
+msgstr "登入層級："
+
+#: propdlg.cpp:192
+msgid "&Office #1:"
+msgstr "辦公室 #1(&O)："
+
+#: propdlg.cpp:197
+msgid "O&ffice #2:"
+msgstr "辦公室 #2(&F)："
+
+#: propdlg.cpp:202
+msgid "&Address:"
+msgstr "地址(&A)："
+
+#: propdlg.cpp:206
+msgid "Account &disabled"
+msgstr "帳號已關閉(&D)"
+
+#: propdlg.cpp:212
+msgid "Disable &POSIX account information"
+msgstr "關閉 POSIX 帳號資訊(&P)"
+
+#: propdlg.cpp:224
+msgid "Password Management"
+msgstr "密碼管理"
+
+#: propdlg.cpp:230
+msgid "Last password change:"
+msgstr "上次密碼變更："
+
+#: propdlg.cpp:236
+msgid "POSIX parameters:"
+msgstr "POSIX 參數："
+
+#: propdlg.cpp:237
+msgid "Time before password may &not be changed after last password change:"
+msgstr "改變密碼之後多久不能再變更(&N)："
+
+#: propdlg.cpp:238
+msgid "Time when password &expires after last password change:"
+msgstr "改變密碼後多久會逾期(&E)："
+
+#: propdlg.cpp:239
+msgid "Time before password expires to &issue an expire warning:"
+msgstr "密碼逾期前多久提出警告(&I)："
+
+#: propdlg.cpp:240
+msgid "Time when account will be &disabled after expiration of password:"
+msgstr "密碼逾期多久後關閉帳號(&D)："
+
+#: propdlg.cpp:251
+msgid "&Account will expire on:"
+msgstr "帳號將逾期於(&A)："
+
+#: propdlg.cpp:274
+msgid "RID:"
+msgstr "RID："
+
+#: propdlg.cpp:279
+msgid "Login script:"
+msgstr "登入命令稿："
+
+#: propdlg.cpp:284
+msgid "Profile path:"
+msgstr "設定路徑："
+
+#. i18n: file ldapsamba.ui line 79
+#: propdlg.cpp:289 rc.cpp:93
+#, no-c-format
+msgid "Home drive:"
+msgstr "家磁碟："
+
+#: propdlg.cpp:294
+msgid "Home path:"
+msgstr "家路徑："
+
+#: propdlg.cpp:299
+msgid "User workstations:"
+msgstr "使用者工作站："
+
+#. i18n: file ldapsamba.ui line 169
+#: propdlg.cpp:304 rc.cpp:105
+#, no-c-format
+msgid "Domain name:"
+msgstr "網域名稱:"
+
+#: propdlg.cpp:315
+msgid "Disable &Samba account information"
+msgstr "關閉 Samba 帳號資訊(&S)"
+
+#: propdlg.cpp:330 propdlg.cpp:638 propdlg.cpp:673
+msgid "Primary group: "
+msgstr "主要群組："
+
+#: propdlg.cpp:333
+msgid "Set as Primary"
+msgstr "設成主要的"
+
+#: propdlg.cpp:344 propdlg.cpp:359
+msgid "User Properties"
+msgstr "使用者屬性"
+
+#: propdlg.cpp:349
+msgid "User Properties - %1 Selected Users"
+msgstr "使用者屬性 - %1 個已選擇的使用者"
+
+#: propdlg.cpp:882
+msgid "You need to specify an UID."
+msgstr "您需要指定一個 UID。"
+
+#: propdlg.cpp:887
+msgid "You must specify a home directory."
+msgstr "您需要指定一個家目錄。"
+
+#: propdlg.cpp:893
+msgid "You must fill the surname field."
+msgstr "您需要輸入姓氏。"
+
+#: propdlg.cpp:900
+msgid "You need to specify a samba RID."
+msgstr "您需要指定 Samba RID。"
+
+#: propdlg.cpp:944
+msgid "User with UID %1 already exists"
+msgstr "使用 UID %1 的使用者已經存在"
+
+#: propdlg.cpp:954
+msgid "User with RID %1 already exists"
+msgstr "使用 RID %1 的使用者已經存在"
+
+#: propdlg.cpp:968
+msgid ""
+"<p>The shell %1 is not yet listed in the file %2. In order to use this shell "
+"you must add it to this file first."
+"<p>Do you want to add it now?"
+msgstr "<p>shell %1 尚未列於檔案 %2。為了要使用這個 shell 您必須先將它加入到這個檔案。<p>您要現在加入它嗎？"
+
+#: propdlg.cpp:972
+msgid "Unlisted Shell"
+msgstr "未列出的 Shell"
+
+#: propdlg.cpp:973
+msgid "&Add Shell"
+msgstr "新增 Shell(&A)"
+
+#: propdlg.cpp:974
+msgid "Do &Not Add"
+msgstr "不要加入(&N)"
+
+#: pwddlg.cpp:29
+msgid "Enter Password"
+msgstr "輸入密碼"
+
+#: pwddlg.cpp:34
+msgid "Password:"
+msgstr "密碼："
+
+#: pwddlg.cpp:50
+msgid "Verify:"
+msgstr "驗證："
+
+#: pwddlg.cpp:74
+msgid ""
+"Passwords are not identical.\n"
+"Try again."
+msgstr ""
+"密碼不相同。\n"
+"請再試一次。"
+
+#. i18n: file kuserui.rc line 8
+#: rc.cpp:6
+#, no-c-format
+msgid "&User"
+msgstr "使用者(&U)"
+
+#. i18n: file kuserui.rc line 14
+#: rc.cpp:9
+#, no-c-format
+msgid "&Group"
+msgstr "群組(&G)"
+
+#. i18n: file filessettings.ui line 40
+#: rc.cpp:15
+#, no-c-format
+msgid "Local User Database Files"
+msgstr "本地端使用者資料庫檔案"
+
+#. i18n: file filessettings.ui line 51
+#: rc.cpp:18
+#, no-c-format
+msgid "Group file:"
+msgstr "群組檔案："
+
+#. i18n: file filessettings.ui line 62
+#: rc.cpp:21
+#, no-c-format
+msgid "Password file:"
+msgstr "密碼檔案："
+
+#. i18n: file filessettings.ui line 83
+#: rc.cpp:24
+#, no-c-format
+msgid "Shadow password file:"
+msgstr "Shadow 密碼檔案："
+
+#. i18n: file filessettings.ui line 104
+#: rc.cpp:27
+#, no-c-format
+msgid "Shadow group file:"
+msgstr "Shadow 群組檔案："
+
+#. i18n: file filessettings.ui line 115
+#: rc.cpp:30
+#, no-c-format
+msgid "MD5 shadow passwords"
+msgstr "MD5 加密密碼"
+
+#. i18n: file filessettings.ui line 133
+#: rc.cpp:33
+#, no-c-format
+msgid "NIS Settings"
+msgstr "NIS 設定"
+
+#. i18n: file filessettings.ui line 144
+#: rc.cpp:36
+#, no-c-format
+msgid "NIS password source:"
+msgstr "NIS 密碼來源："
+
+#. i18n: file filessettings.ui line 155
+#: rc.cpp:39
+#, no-c-format
+msgid "NIS group source:"
+msgstr "NIS 群組來源："
+
+#. i18n: file filessettings.ui line 166
+#: rc.cpp:42
+#, no-c-format
+msgid "NIS minimum UID:"
+msgstr "NIS 最小 UID："
+
+#. i18n: file filessettings.ui line 177
+#: rc.cpp:45
+#, no-c-format
+msgid "NIS minimum GID:"
+msgstr "NIS 最小 GID："
+
+#. i18n: file generalsettings.ui line 32
+#: rc.cpp:48
+#, no-c-format
+msgid "Source of user/group database:"
+msgstr "使用者/群組資料庫來源："
+
+#. i18n: file generalsettings.ui line 51
+#: rc.cpp:57
+#, no-c-format
+msgid "System"
+msgstr "系統"
+
+#. i18n: file generalsettings.ui line 78
+#: rc.cpp:60
+#, no-c-format
+msgid "First normal GID:"
+msgstr "第一個正常的 GID："
+
+#. i18n: file generalsettings.ui line 89
+#: rc.cpp:63 rc.cpp:99
+#, no-c-format
+msgid "Home path template:"
+msgstr "家路徑樣板："
+
+#. i18n: file generalsettings.ui line 100
+#: rc.cpp:66
+#, no-c-format
+msgid "Shell:"
+msgstr "Shell："
+
+#. i18n: file generalsettings.ui line 119
+#: rc.cpp:69
+#, no-c-format
+msgid "First normal UID:"
+msgstr "第一個正常的 UID："
+
+#. i18n: file generalsettings.ui line 153
+#: rc.cpp:75 rc.cpp:270
+#, no-c-format
+msgid "Copy skeleton to home folder"
+msgstr "複製家目錄架構到家目錄"
+
+#. i18n: file generalsettings.ui line 169
+#: rc.cpp:78 rc.cpp:276
+#, no-c-format
+msgid "User private groups"
+msgstr "使用者私人群組"
+
+#. i18n: file generalsettings.ui line 177
+#: rc.cpp:81
+#, no-c-format
+msgid "Default group:"
+msgstr "預設群組："
+
+#. i18n: file ldapsamba.ui line 38
+#: rc.cpp:87
+#, no-c-format
+msgid "Manage Samba user accounts/groups"
+msgstr "管理 Samba 使用者帳號/群組"
+
+#. i18n: file ldapsamba.ui line 65
+#: rc.cpp:90
+#, no-c-format
+msgid "Default login script:"
+msgstr "預設登入命令稿："
+
+#. i18n: file ldapsamba.ui line 93
+#: rc.cpp:96
+#, no-c-format
+msgid "Profile path template:"
+msgstr "設定路徑樣板："
+
+#. i18n: file ldapsamba.ui line 150
+#: rc.cpp:102 rc.cpp:522
+#, no-c-format
+msgid "Store LanManager hashed password"
+msgstr "儲存 LanManager hashed 密碼"
+
+#. i18n: file ldapsamba.ui line 191
+#: rc.cpp:108
+#, no-c-format
+msgid "&Query Server"
+msgstr "查詢伺服器(&Q)"
+
+#. i18n: file ldapsamba.ui line 204
+#: rc.cpp:111
+#, no-c-format
+msgid "Domain SID (you can obtain with 'net getlocalsid domain_name'):"
+msgstr "網域 SID（您可以用 \"net getlocalsid domain_name\" 來取得）："
+
+#. i18n: file ldapsamba.ui line 234
+#: rc.cpp:114
+#, no-c-format
+msgid "Algorithmic RID base:"
+msgstr "RID base 演算法："
+
+#. i18n: file ldapsettings.ui line 35
+#: rc.cpp:117 rc.cpp:168
+#, no-c-format
+msgid "cn"
+msgstr "cn"
+
+#. i18n: file ldapsettings.ui line 40
+#: rc.cpp:120
+#, no-c-format
+msgid "gidNumber"
+msgstr "gidNumber"
+
+#. i18n: file ldapsettings.ui line 55
+#: rc.cpp:123
+#, no-c-format
+msgid "Plain Text"
+msgstr "純文字"
+
+#. i18n: file ldapsettings.ui line 60
+#: rc.cpp:126
+#, no-c-format
+msgid "CRYPT"
+msgstr "加密"
+
+#. i18n: file ldapsettings.ui line 65
+#: rc.cpp:129
+#, no-c-format
+msgid "MD5"
+msgstr "MD5"
+
+#. i18n: file ldapsettings.ui line 70
+#: rc.cpp:132
+#, no-c-format
+msgid "SMD5"
+msgstr "SMD5"
+
+#. i18n: file ldapsettings.ui line 75
+#: rc.cpp:135
+#, no-c-format
+msgid "SHA"
+msgstr "SHA"
+
+#. i18n: file ldapsettings.ui line 80
+#: rc.cpp:138
+#, no-c-format
+msgid "SSHA"
+msgstr "SSHA"
+
+#. i18n: file ldapsettings.ui line 92
+#: rc.cpp:141
+#, no-c-format
+msgid "User base:"
+msgstr "使用者 base："
+
+#. i18n: file ldapsettings.ui line 103
+#: rc.cpp:144
+#, no-c-format
+msgid "Group filter:"
+msgstr "群組過濾器："
+
+#. i18n: file ldapsettings.ui line 114
+#: rc.cpp:147
+#, no-c-format
+msgid "Structural objectclass:"
+msgstr "Structural objectclass："
+
+#. i18n: file ldapsettings.ui line 125
+#: rc.cpp:150
+#, no-c-format
+msgid "User filter:"
+msgstr "使用者過濾器："
+
+#. i18n: file ldapsettings.ui line 144
+#: rc.cpp:153
+#, no-c-format
+msgid "account"
+msgstr "帳號"
+
+#. i18n: file ldapsettings.ui line 149
+#: rc.cpp:156
+#, no-c-format
+msgid "inetOrgPerson"
+msgstr "inetOrgPerson"
+
+#. i18n: file ldapsettings.ui line 161
+#: rc.cpp:159
+#, no-c-format
+msgid "Group RDN prefix:"
+msgstr "Group RDN prefix："
+
+#. i18n: file ldapsettings.ui line 170
+#: rc.cpp:162
+#, no-c-format
+msgid "uid"
+msgstr "uid"
+
+#. i18n: file ldapsettings.ui line 175
+#: rc.cpp:165
+#, no-c-format
+msgid "uidNumber"
+msgstr "uidNumber"
+
+#. i18n: file ldapsettings.ui line 192
+#: rc.cpp:171
+#, no-c-format
+msgid "Group base:"
+msgstr "群組 base："
+
+#. i18n: file ldapsettings.ui line 203
+#: rc.cpp:174
+#, no-c-format
+msgid "User RDN prefix:"
+msgstr "User RDN prefix："
+
+#. i18n: file ldapsettings.ui line 214
+#: rc.cpp:177
+#, no-c-format
+msgid "Password hash:"
+msgstr "密碼 hash："
+
+#. i18n: file ldapsettings.ui line 227
+#: rc.cpp:180
+#, no-c-format
+msgid "Manage shadowAccount objectclass"
+msgstr "管理 shadowAccount objectclass"
+
+#. i18n: file ldapsettings.ui line 235
+#: rc.cpp:183 rc.cpp:438
+#, no-c-format
+msgid "Store the user's full name in the cn attribute"
+msgstr "在 cn 屬性中儲存使用者的全名"
+
+#. i18n: file ldapsettings.ui line 243
+#: rc.cpp:186
+#, no-c-format
+msgid "Update the gecos attribute"
+msgstr "更新 gecos 屬性"
+
+#. i18n: file passwordpolicy.ui line 40
+#: rc.cpp:189
+#, no-c-format
+msgid "Time before password expires to issue an expire warning:"
+msgstr "密碼逾期多久前提出警告："
+
+#. i18n: file passwordpolicy.ui line 54
+#: rc.cpp:192
+#, no-c-format
+msgid "Time when password expires after last password change:"
+msgstr "改變密碼後多久逾期："
+
+#. i18n: file passwordpolicy.ui line 68
+#: rc.cpp:195
+#, no-c-format
+msgid "Time when account will be disabled after expiration of password:"
+msgstr "密碼逾期多久後關閉帳號："
+
+#. i18n: file passwordpolicy.ui line 116
+#: rc.cpp:210
+#, no-c-format
+msgid "Time before password may not be changed after last password change:"
+msgstr "密碼變更多久內不能再變更："
+
+#. i18n: file passwordpolicy.ui line 171
+#: rc.cpp:222
+#, no-c-format
+msgid "Account will expire on:"
+msgstr "帳號將逾期於："
+
+#. i18n: file kuser.kcfg line 16
+#: rc.cpp:228
+#, no-c-format
+msgid "Default connection"
+msgstr "預設連線"
+
+#. i18n: file kuser.kcfg line 20
+#: rc.cpp:231
+#, no-c-format
+msgid "Show system users"
+msgstr "顯示系統使用者"
+
+#. i18n: file kuser.kcfg line 26
+#: rc.cpp:234
+#, no-c-format
+msgid "The source of the user and group database"
+msgstr "使用者/群組資料庫的來源"
+
+#. i18n: file kuser.kcfg line 27
+#: rc.cpp:237
+#, no-c-format
+msgid ""
+"This option allows you to select where the user/group data stored. Currently "
+"three storage backends are supported. <BR><B>Files</B> "
+"stores user/group data in traditional /etc/passwd and /etc/group flat files. "
+"<BR><B>LDAP</B> stores data in a directory server using the posixAccount and "
+"posixGroup object classes; this backend allows the management of Samba "
+"users/groups via the sambaSamAccount object class.<BR><B>System</B> "
+"provides a read-only access to all users and groups which your installation "
+"knows about."
+msgstr ""
+"這個選項讓您選擇使用者與群組的資料要儲存在哪裡。目前有三種後端型態可以選擇。"
+"<br> 選擇<b>檔案</b>會將使用者與群組資料存放在傳統的 /etc/passwd 與 /etc/group 檔案中。"
+"<br> 選擇<b>LDAP</b>會將這些資料用 posixAccount 與 posixGroup object classes "
+"放在目錄伺服器中。這個選項也可以用來管理 Samba 使用者與群組，此時是使用 sambaSamAccount object class。"
+"<br> 選擇<b>系統</b>則會提供一種讓所有使用者與群組只能唯讀的方式。"
+
+#. i18n: file kuser.kcfg line 36
+#: rc.cpp:240
+#, no-c-format
+msgid "Shell"
+msgstr "Shell"
+
+#. i18n: file kuser.kcfg line 37
+#: rc.cpp:243
+#, no-c-format
+msgid ""
+"This option allows you to select the shell which will be the default for new "
+"users."
+msgstr "這個選項讓您選擇新使用者預設使用的 shell。"
+
+#. i18n: file kuser.kcfg line 40
+#: rc.cpp:246
+#, no-c-format
+msgid "Home path template"
+msgstr "家路徑樣板"
+
+#. i18n: file kuser.kcfg line 41
+#: rc.cpp:249
+#, no-c-format
+msgid ""
+"This option specifies the UNIX home path template for new users. The '%U' macro "
+"will replaced with the actual user name."
+msgstr "這個選項指定 UNIX 家路徑的樣板。%U 會被換成實際的使用者名稱。"
+
+#. i18n: file kuser.kcfg line 45
+#: rc.cpp:252
+#, no-c-format
+msgid "First UID"
+msgstr "第一個 UID"
+
+#. i18n: file kuser.kcfg line 46
+#: rc.cpp:255
+#, no-c-format
+msgid ""
+"This options specifies the first user ID where searching for an available UID "
+"starts."
+msgstr "這個選項指定第一個使用者代碼 (UID)，在尋找可用的 UID 時會從這個 UID 開始找。"
+
+#. i18n: file kuser.kcfg line 50
+#: rc.cpp:258
+#, no-c-format
+msgid "First GID"
+msgstr "第一個 GID"
+
+#. i18n: file kuser.kcfg line 51
+#: rc.cpp:261
+#, no-c-format
+msgid ""
+"This options specifies the first group ID where searching for an available GID "
+"starts."
+msgstr "這個選項指定第一個群組代碼 (GID)，在尋找可用的 GID 時會從這個 GID 開始找。"
+
+#. i18n: file kuser.kcfg line 56
+#: rc.cpp:267
+#, no-c-format
+msgid ""
+"If this option is checked then a home directory will created for the new user."
+msgstr "勾選這個選項的話，會為新使用者建立家目錄。"
+
+#. i18n: file kuser.kcfg line 61
+#: rc.cpp:273
+#, no-c-format
+msgid ""
+"If this option is checked then the contents of the skeleton folder will copied "
+"to the new user's home directory"
+msgstr "這個選項被勾選的話，會將架構(skeleton)目錄中的內容複製到新的家目錄中。"
+
+#. i18n: file kuser.kcfg line 66
+#: rc.cpp:279
+#, no-c-format
+msgid ""
+"If this option is enabled, new user creation will create a private group named "
+"as the user, and the primary group of the user will assigned to this private "
+"group."
+msgstr "打開這個選項的話，會為新使用者建立一個私密群組，名稱跟使用者一樣，而使用者的主要群組會設定為此新的群組。"
+
+#. i18n: file kuser.kcfg line 70
+#: rc.cpp:282
+#, no-c-format
+msgid "Default primary group"
+msgstr "預設主要群組"
+
+#. i18n: file kuser.kcfg line 71
+#: rc.cpp:285
+#, no-c-format
+msgid ""
+"This is the default primary group which will be assigned to a newly created "
+"user."
+msgstr "這是產生新使用者時預設的主要群組。"
+
+#. i18n: file kuser.kcfg line 76
+#: rc.cpp:288
+#, no-c-format
+msgid "smin"
+msgstr "smin"
+
+#. i18n: file kuser.kcfg line 80
+#: rc.cpp:291
+#, no-c-format
+msgid "smax"
+msgstr "smax"
+
+#. i18n: file kuser.kcfg line 84
+#: rc.cpp:294
+#, no-c-format
+msgid "swarn"
+msgstr "swarn"
+
+#. i18n: file kuser.kcfg line 88
+#: rc.cpp:297
+#, no-c-format
+msgid "sinact"
+msgstr "sinact"
+
+#. i18n: file kuser.kcfg line 92
+#: rc.cpp:300
+#, no-c-format
+msgid "sexpire"
+msgstr "sexpire"
+
+#. i18n: file kuser.kcfg line 93
+#: rc.cpp:303
+#, no-c-format
+msgid "This setting is for specifying a date when user accounts will expire."
+msgstr "這個設定指定使用者帳號逾期的日期。"
+
+#. i18n: file kuser.kcfg line 97
+#: rc.cpp:306
+#, no-c-format
+msgid "sneverexpire"
+msgstr "sneverexpire"
+
+#. i18n: file kuser.kcfg line 98
+#: rc.cpp:309
+#, no-c-format
+msgid "Check this if you want to user accounts never expire."
+msgstr "勾選這個選項使用者帳號就永不逾期。"
+
+#. i18n: file kuser.kcfg line 103
+#: rc.cpp:312
+#, no-c-format
+msgid "Password file"
+msgstr "密碼檔案"
+
+#. i18n: file kuser.kcfg line 104
+#: rc.cpp:315
+#, no-c-format
+msgid "This specifies the users database file (usually /etc/passwd)."
+msgstr "這裡指定使用者資料庫檔案（通常都是 /etc/passwd）。"
+
+#. i18n: file kuser.kcfg line 108
+#: rc.cpp:318
+#, no-c-format
+msgid "Group file"
+msgstr "群組檔案"
+
+#. i18n: file kuser.kcfg line 109
+#: rc.cpp:321
+#, no-c-format
+msgid "This specifies the groups database file (usually /etc/group)."
+msgstr "這裡指定群組資料庫檔案（通常都是 /etc/group）。"
+
+#. i18n: file kuser.kcfg line 113
+#: rc.cpp:324
+#, no-c-format
+msgid "MD5 Shadow passwords"
+msgstr "用 MD5 將密碼加密"
+
+#. i18n: file kuser.kcfg line 114
+#: rc.cpp:327
+#, no-c-format
+msgid ""
+"Check this if you want the passwords in the shadow file MD5 hashed. Leave this "
+"unchecked if DES encryption should be used."
+msgstr "如果您要用 MD5 加密密碼就勾選這個選項。否則會用 DES 加密。"
+
+#. i18n: file kuser.kcfg line 117
+#: rc.cpp:330
+#, no-c-format
+msgid "Shadow password file"
+msgstr "Shadow 密碼檔"
+
+#. i18n: file kuser.kcfg line 118
+#: rc.cpp:333
+#, no-c-format
+msgid ""
+"Specifies the shadow password file (usually /etc/shadow). Leave this empty if "
+"your system does not use a shadow password file."
+msgstr "這裡指定 shadow 密碼檔（通常都是 /etc/shadow）。如果您的系統沒有使用 shadow 密碼檔，就請留白。"
+
+#. i18n: file kuser.kcfg line 122
+#: rc.cpp:336
+#, no-c-format
+msgid "Group shadow file"
+msgstr "群組 shadow 檔"
+
+#. i18n: file kuser.kcfg line 123
+#: rc.cpp:339
+#, no-c-format
+msgid ""
+"Specifies the shadow group file (usually /etc/gshadow). Leave this empty if "
+"your system does not use a shadow group file."
+msgstr "這裡指定群組 shadow 檔（通常都是 /etc/gshadow）。如果您的系統沒有使用群組 shadow 密碼檔，就請留白。"
+
+#. i18n: file kuser.kcfg line 127
+#: rc.cpp:342
+#, no-c-format
+msgid "NIS password source"
+msgstr "NIS 密碼來源"
+
+#. i18n: file kuser.kcfg line 130
+#: rc.cpp:345
+#, no-c-format
+msgid "NIS minimum UID"
+msgstr "NIS 最小 UID"
+
+#. i18n: file kuser.kcfg line 133
+#: rc.cpp:348
+#, no-c-format
+msgid "NIS group source"
+msgstr "NIS 群組來源"
+
+#. i18n: file kuser.kcfg line 136
+#: rc.cpp:351
+#, no-c-format
+msgid "NIS minimum GID"
+msgstr "NIS 最小 GID"
+
+#. i18n: file kuser.kcfg line 140
+#: rc.cpp:354
+#, no-c-format
+msgid "LDAP User"
+msgstr "LDAP 使用者"
+
+#. i18n: file kuser.kcfg line 143
+#: rc.cpp:357
+#, no-c-format
+msgid "LDAP Password"
+msgstr "LDAP 密碼"
+
+#. i18n: file kuser.kcfg line 146
+#: rc.cpp:360
+#, no-c-format
+msgid "LDAP SASL Realm"
+msgstr "LDAP SASL Realm"
+
+#. i18n: file kuser.kcfg line 149
+#: rc.cpp:363
+#, no-c-format
+msgid "LDAP Bind DN"
+msgstr "LDAP Bind DN"
+
+#. i18n: file kuser.kcfg line 152
+#: rc.cpp:366
+#, no-c-format
+msgid "LDAP Host"
+msgstr "LDAP 站台"
+
+#. i18n: file kuser.kcfg line 155
+#: rc.cpp:369
+#, no-c-format
+msgid "LDAP Port"
+msgstr "LDAP 連接埠"
+
+#. i18n: file kuser.kcfg line 159
+#: rc.cpp:372
+#, no-c-format
+msgid "LDAP version"
+msgstr "LDAP 版本"
+
+#. i18n: file kuser.kcfg line 163
+#: rc.cpp:375
+#, no-c-format
+msgid "LDAP Size limit"
+msgstr "LDAP 大小限制"
+
+#. i18n: file kuser.kcfg line 167
+#: rc.cpp:378
+#, no-c-format
+msgid "LDAP Time limit"
+msgstr "LDAP 時間限制"
+
+#. i18n: file kuser.kcfg line 171
+#: rc.cpp:381
+#, no-c-format
+msgid "LDAP Base DN"
+msgstr "LDAP Base DN"
+
+#. i18n: file kuser.kcfg line 174
+#: rc.cpp:384
+#, no-c-format
+msgid "LDAP Filter"
+msgstr "LDAP 過濾器"
+
+#. i18n: file kuser.kcfg line 177
+#: rc.cpp:387
+#, no-c-format
+msgid "LDAP no encryption"
+msgstr "LDAP 不加密"
+
+#. i18n: file kuser.kcfg line 181
+#: rc.cpp:390
+#, no-c-format
+msgid "LDAP TLS"
+msgstr "LDAP TLS"
+
+#. i18n: file kuser.kcfg line 185
+#: rc.cpp:393
+#, no-c-format
+msgid "LDAP SSL"
+msgstr "LDAP SSL"
+
+#. i18n: file kuser.kcfg line 189
+#: rc.cpp:396
+#, no-c-format
+msgid "LDAP Anonymous"
+msgstr "LDAP 匿名"
+
+#. i18n: file kuser.kcfg line 193
+#: rc.cpp:399
+#, no-c-format
+msgid "LDAP Simple auth"
+msgstr "LDAP 簡單認證"
+
+#. i18n: file kuser.kcfg line 197
+#: rc.cpp:402
+#, no-c-format
+msgid "LDAP SASL auth"
+msgstr "LDAP SASL 認證"
+
+#. i18n: file kuser.kcfg line 201
+#: rc.cpp:405
+#, no-c-format
+msgid "LDAP SASL mechanism"
+msgstr "LDAP SASL 機制"
+
+#. i18n: file kuser.kcfg line 205
+#: rc.cpp:408
+#, no-c-format
+msgid "LDAP User container"
+msgstr "LDAP User 存放處"
+
+#. i18n: file kuser.kcfg line 206
+#: rc.cpp:411
+#, no-c-format
+msgid ""
+"This specifies where to store users' entries relative to the LDAP base DN."
+msgstr "這裡指定存放使用者資料的地方，相對於 LDAP base DN。"
+
+#. i18n: file kuser.kcfg line 210
+#: rc.cpp:414
+#, no-c-format
+msgid "LDAP User filter"
+msgstr "LDAP 使用者過濾器"
+
+#. i18n: file kuser.kcfg line 211
+#: rc.cpp:417
+#, no-c-format
+msgid "This specifies the filter used for user entries."
+msgstr "這裡指定用於過濾使用者資料的過濾器。"
+
+#. i18n: file kuser.kcfg line 214
+#: rc.cpp:420
+#, no-c-format
+msgid "LDAP Group container"
+msgstr "LDAP 群組存放處"
+
+#. i18n: file kuser.kcfg line 215
+#: rc.cpp:423
+#, no-c-format
+msgid ""
+"This specifies where to store groups' entries relative to the LDAP base DN."
+msgstr "這裡指定存放群組資料的地方，相對於 LDAP base DN。"
+
+#. i18n: file kuser.kcfg line 219
+#: rc.cpp:426
+#, no-c-format
+msgid "LDAP Group filter"
+msgstr "LDAP 群組過濾器"
+
+#. i18n: file kuser.kcfg line 220
+#: rc.cpp:429
+#, no-c-format
+msgid "This specifies the filter used for group entries."
+msgstr "這裡指定過濾群組資料的過濾器。"
+
+#. i18n: file kuser.kcfg line 223
+#: rc.cpp:432
+#, no-c-format
+msgid "LDAP User RDN prefix"
+msgstr "LDAP User RDN prefix"
+
+#. i18n: file kuser.kcfg line 224
+#: rc.cpp:435
+#, no-c-format
+msgid "This specifies what prefix will used for user entries."
+msgstr "這裡指定用於使用者資料的前置(prefix)。"
+
+#. i18n: file kuser.kcfg line 234
+#: rc.cpp:441
+#, no-c-format
+msgid ""
+"Check this if the user's full name should be stored in the cn (Canonical Name) "
+"attribute."
+msgstr "勾選這個選項的話，會將使用者全名存在 cn (Canonical Name) 屬性裡。"
+
+#. i18n: file kuser.kcfg line 238
+#: rc.cpp:444
+#, no-c-format
+msgid "Update the gecos field"
+msgstr "更新 gecos 欄位"
+
+#. i18n: file kuser.kcfg line 239
+#: rc.cpp:447
+#, no-c-format
+msgid "Check this if the gecos attribute should be updated."
+msgstr "勾選這個選項的話 gecos 屬性會被更新。"
+
+#. i18n: file kuser.kcfg line 243
+#: rc.cpp:450
+#, no-c-format
+msgid "Manage LDAP shadowAccount objectclass"
+msgstr "管理 LDAP shadowAccount objectclass"
+
+#. i18n: file kuser.kcfg line 244
+#: rc.cpp:453
+#, no-c-format
+msgid ""
+"Check this if the shadowAccount object should be used in the users' entries. It "
+"allows to enforce password change/expiration policies."
+msgstr "勾選這個選項的話，shadowAccount object 會用於使用者資料中。這樣可以強制使用者遵循使用密碼更換與逾期的原則。"
+
+#. i18n: file kuser.kcfg line 248
+#: rc.cpp:456
+#, no-c-format
+msgid "LDAP Structural objectclass"
+msgstr "LDAP Structural objectclass"
+
+#. i18n: file kuser.kcfg line 249
+#: rc.cpp:459
+#, no-c-format
+msgid ""
+"This option allows to specify the structural objectclass used with users' "
+"entries. If you want to use these entries not just for authentication, but for "
+"an addressbook, too, then choose inetOrgPerson."
+msgstr ""
+"這個選項用於指定使用者資料中的 structural objectclass。如果您不只是使用這些資料來認證，也要用於通訊錄時，請選擇 "
+"inetOrgPerson。"
+
+#. i18n: file kuser.kcfg line 257
+#: rc.cpp:462
+#, no-c-format
+msgid "LDAP Group RDN prefix"
+msgstr "LDAP Group RDN prefix"
+
+#. i18n: file kuser.kcfg line 258
+#: rc.cpp:465
+#, no-c-format
+msgid "This specifies what prefix will used for group entries."
+msgstr "這裡指定群組資料使用的 prefix。"
+
+#. i18n: file kuser.kcfg line 266
+#: rc.cpp:468
+#, no-c-format
+msgid "LDAP Password hash method"
+msgstr "LDAP 密碼 hash 方法。"
+
+#. i18n: file kuser.kcfg line 267
+#: rc.cpp:471
+#, no-c-format
+msgid "This specifies the password hashing method. The most secure is SSHA."
+msgstr "這裡指定密碼 hash 的方法。最安全的是 SSHA。"
+
+#. i18n: file kuser.kcfg line 279
+#: rc.cpp:474
+#, no-c-format
+msgid "Enable samba account management"
+msgstr "打開 Samba 帳號管理"
+
+#. i18n: file kuser.kcfg line 280
+#: rc.cpp:477
+#, no-c-format
+msgid ""
+"Check this if you want to use the user/group entries in a Samba domain. KUser "
+"will create sambaSamAccount objectclass for each entry which is usable with the "
+"ldapsam passdb backend with Samba version greater than 3.0."
+msgstr ""
+"如果您要使用使用者/群組資料於 Samba 網域中。KUser 會幫每個資料產生 sambaSamAccount objectclass，可以用於 "
+"ldapsam passdb 後端資料庫（Samba 版本必須大於 3.0）。"
+
+#. i18n: file kuser.kcfg line 283
+#: rc.cpp:480
+#, no-c-format
+msgid "Samba domain name"
+msgstr "Samba 網域名稱"
+
+#. i18n: file kuser.kcfg line 284
+#: rc.cpp:483
+#, no-c-format
+msgid "This specifies the samba domain name."
+msgstr "這裡指定 Samba 網域名稱"
+
+#. i18n: file kuser.kcfg line 287
+#: rc.cpp:486
+#, no-c-format
+msgid "Samba domain SID"
+msgstr "Samba 網域 SID"
+
+#. i18n: file kuser.kcfg line 288
+#: rc.cpp:489
+#, no-c-format
+msgid ""
+"This specifies the domain Security IDentifier. It is unique in a single domain. "
+"You can query the value of the domain SID with 'net getlocalsid domain_name'."
+msgstr ""
+"這裡指定 Samba 網域的安全代碼（Security ID）。每一個網域都要不同。您可以用 \"net getlocalsid domain_name\" "
+"來查詢網域的 SID。"
+
+#. i18n: file kuser.kcfg line 291
+#: rc.cpp:492
+#, no-c-format
+msgid "Algorithmic RID base"
+msgstr "Algorithmic RID base"
+
+#. i18n: file kuser.kcfg line 292
+#: rc.cpp:495
+#, no-c-format
+msgid ""
+"This value is an offset for the algorithmic mapping from uids and gids to rids. "
+"The default (and minimum) value is 1000, it must be even, and the LDAP database "
+"and smb.conf must store the same values."
+msgstr ""
+"這個值是將 uid 與 gid 映射到 rid 的偏移值。預設（也是最小）值是 1000。必須是雙數，LDAP 資料庫與 smb.conf 必須存同樣的值。"
+
+#. i18n: file kuser.kcfg line 296
+#: rc.cpp:498
+#, no-c-format
+msgid "Samba login script"
+msgstr "Samba 登入命令稿"
+
+#. i18n: file kuser.kcfg line 297
+#: rc.cpp:501
+#, no-c-format
+msgid ""
+"This specifies a name of a login script (in the `Netlogon` share) which will be "
+"executed as the user logs in to a Windows machine."
+msgstr "這裡指定登入命令稿名稱（在 Netlogon 的地方），使用者登入 Windows 機器時會執行。"
+
+#. i18n: file kuser.kcfg line 300
+#: rc.cpp:504
+#, no-c-format
+msgid "Samba home drive"
+msgstr "Samba 家磁碟"
+
+#. i18n: file kuser.kcfg line 301
+#: rc.cpp:507
+#, no-c-format
+msgid ""
+"Specifies a drive letter where the user's home directory will automatically "
+"mapped when he/she logs into a Windows machine."
+msgstr "指定使用者登入 Windows 機器時，其家目錄會自動映射的磁碟機代號。"
+
+#. i18n: file kuser.kcfg line 304
+#: rc.cpp:510
+#, no-c-format
+msgid "Samba profile path template"
+msgstr "Samba 設定路徑樣板"
+
+#. i18n: file kuser.kcfg line 305
+#: rc.cpp:513
+#, no-c-format
+msgid ""
+"This specifies the location of the roaming profile of the user. The '%U' macro "
+"will be replaced with the actual user name."
+msgstr "指定使用者設定檔的位置。%U 會被取代為實際的使用者名稱。"
+
+#. i18n: file kuser.kcfg line 308
+#: rc.cpp:516
+#, no-c-format
+msgid "Samba home path template"
+msgstr "Samba 家路徑樣板"
+
+#. i18n: file kuser.kcfg line 309
+#: rc.cpp:519
+#, no-c-format
+msgid ""
+"This specifies the location of the home directory of the user. This field is "
+"meaningful only for Windows machines. The '%U' macro will be replaced with the "
+"actual user name."
+msgstr "指定使用者家目錄的位置。這個欄位只對 Windows 機器有意義。%U 會被取代為實際使用者名稱。"
+
+#. i18n: file kuser.kcfg line 313
+#: rc.cpp:525
+#, no-c-format
+msgid ""
+"Store the LanManager hashed password in the sambaLMPassword attribute. Check "
+"this if you have older clients (Win9x series and before) on your network."
+msgstr ""
+"在 sambaLMPassword 屬性中儲存 LanManager hash 密碼。如果您使用較舊的（Win9x 系列或更早的）客戶端軟體，請勾選此項。"
+
+#: selectconn.cpp:38
+msgid "Connection Selection"
+msgstr "選擇連線"
+
+#: selectconn.cpp:42
+msgid "&New..."
+msgstr "新增(&N)..."
+
+#: selectconn.cpp:48
+msgid "Defined connections:"
+msgstr "已定義的連線："
+
+#: selectconn.cpp:81
+msgid "Please type the name of the new connection:"
+msgstr "請輸入新連線的名稱："
+
+#: selectconn.cpp:84
+msgid "A connection with this name already exists."
+msgstr "此連線已經存在。"
+
+#: selectconn.cpp:122
+msgid "Do you really want to delete the connection '%1'?"
+msgstr "您真的要刪除連線 %1？"
+
+#: selectconn.cpp:123
+msgid "Delete Connection"
+msgstr "刪除連線"
diff --git a/tde-i18n-zh_TW/messages/kdeadmin/secpolicy.po b/tde-i18n-zh_TW/messages/kdeadmin/secpolicy.po
new file mode 100644
index 00000000000..215c5d7ca19
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdeadmin/secpolicy.po
@@ -0,0 +1,47 @@
+# Traditional Chinese Translation for secpolicy
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# Shell Hung <shell@shellhung.org>
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: secpolicy\n"
+"POT-Creation-Date: 2005-02-06 01:20+0100\n"
+"PO-Revision-Date: 2001-08-29 10:03+CST\n"
+"Last-Translator: Shell Hung <shell@shellhung.org>\n"
+"Language-Team: Traditional Chinese <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: main.cpp:33
+msgid "Display PAM security policies"
+msgstr "顯示 PAM 安全原則"
+
+#: pamview.cpp:51
+msgid "Available services:"
+msgstr "可使用的服務:"
+
+#: pamview.cpp:58
+msgid "Category"
+msgstr "分類"
+
+#: pamview.cpp:59
+msgid "Level"
+msgstr "層次"
+
+#: pamview.cpp:60
+msgid "Module"
+msgstr "模組"
+
+#: pamview.cpp:82
+msgid ""
+"/etc/pam.d folder does not exist.\n"
+"Either your system does not have PAM support or there is some other "
+"configuration problem."
+msgstr ""
+"/etc/pam.d 目錄並不存在.\n"
+"可能是您的系統沒有 PAM 支援\n"
+"或是某部份的設定錯誤."
+
+#~ msgid "What does this do?"
+#~ msgstr "這個工作做些甚麼 ?"