Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

1 files changed, 456 insertions, 505 deletions

diff --git a/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po b/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po
index 080c041c6fe..8b2e50a4091 100644
--- a/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po
+++ b/tde-i18n-zh_TW/messages/tdeadmin/knetworkconf.po
@@ -5,9 +5,10 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: knetworkconf\n"
-"POT-Creation-Date: 2014-11-05 10:17-0600\n"
+"POT-Creation-Date: 2018-12-13 14:10+0100\n"
 "PO-Revision-Date: 2006-06-19 09:12+0800\n"
-"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com."
+"tw>\n"
 "Language-Team: Chinese Traditional <zh@li.org>\n"
 "Language: \n"
 "MIME-Version: 1.0\n"
@@ -15,27 +16,132 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.2\n"
 
-#: knetworkconf.cpp:66
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: knetworkconf/kadddevicecontainer.cpp:53
+msgid "&Advanced Settings"
+msgstr "進階設定(&A)"
+
+#: knetworkconf/kadddevicecontainer.cpp:54
+#: knetworkconf/kadddevicecontainer.cpp:55
+msgid "Toggle between advanced and basic settings"
+msgstr "切換基本或進階設定"
+
+#: knetworkconf/kadddevicecontainer.cpp:56
+#: knetworkconf/kaddknownhostdlg.ui.h:69 knetworkconf/kaddknownhostdlg.ui:129
+#: knetworkconf/knetworkconf.cpp:210 knetworkconf/kreloadnetworkdlg.ui:73
+#: knetworkconf/tdeselectdistrodlg.ui:38
+#, no-c-format
+msgid "&OK"
+msgstr ""
+
+#: knetworkconf/kadddevicecontainer.cpp:57
+msgid "Apply changes"
+msgstr "套用變更"
+
+#: knetworkconf/kadddevicecontainer.cpp:58 knetworkconf/kadddnsserverdlg.ui:103
+#: knetworkconf/kaddknownhostdlg.ui:104 knetworkconf/tdeselectdistrodlg.ui:55
+#, no-c-format
+msgid "&Cancel"
+msgstr ""
+
+#: knetworkconf/kadddevicecontainer.cpp:59
+msgid "Forget changes"
+msgstr "丟棄變更"
+
+#: knetworkconf/kadddevicecontainer.cpp:129
+#: knetworkconf/kadddnsserverdlg.ui.h:42 knetworkconf/kaddknownhostdlg.ui.h:25
+msgid "The format of the specified IP address is not valid."
+msgstr "指定的 IP 位址格式不正確。"
+
+#: knetworkconf/kadddevicecontainer.cpp:129
+#: knetworkconf/kadddevicecontainer.cpp:132
+#: knetworkconf/kadddevicecontainer.cpp:135
+#: knetworkconf/kadddevicecontainer.cpp:138
+#: knetworkconf/kadddnsserverdlg.ui.h:42 knetworkconf/kaddknownhostdlg.ui.h:25
+#: knetworkconf/knetworkconf.cpp:590
+msgid "Invalid IP Address"
+msgstr "不正確的 IP 位址"
+
+#: knetworkconf/kadddevicecontainer.cpp:132
+msgid "The format of the specified netmask is not valid."
+msgstr "網路遮罩格式不正確。"
+
+#: knetworkconf/kadddevicecontainer.cpp:135
+msgid "The format of the specified broadcast is not valid."
+msgstr "網路廣播位址格式不正確。"
+
+#: knetworkconf/kadddevicecontainer.cpp:138
+msgid "The format of the specified Gateway is not valid."
+msgstr "閘道位址格式不正確。"
+
+#: knetworkconf/kadddevicecontainer.cpp:174
+msgid "Basic Settings"
+msgstr "基本設定"
+
+#: knetworkconf/kadddevicecontainer.cpp:179
+msgid "Advanced Settings"
+msgstr "進階設定"
+
+#: knetworkconf/kadddnsserverdlg.ui.h:54
+msgid "You have to type an alias first."
+msgstr "您必須先輸入一個別名。"
+
+#: knetworkconf/kadddnsserverdlg.ui.h:54
+msgid "Invalid Text"
+msgstr "不合法的文字"
+
+#: knetworkconf/kaddknownhostdlg.ui.h:29
+msgid "You must add at least one alias for the specified IP address."
+msgstr "您必須為這個 IP 位址至少指定一個別名。"
+
+#: knetworkconf/kaddknownhostdlg.ui.h:29
+msgid "Insufficient Aliases"
+msgstr "不適當的別名"
+
+#: knetworkconf/kaddknownhostdlg.ui.h:63
+msgid "Edit Alias"
+msgstr "編輯別名"
+
+#: knetworkconf/kaddknownhostdlg.ui.h:64 knetworkconf/kaddknownhostdlg.ui.h:92
+msgid "Alias:"
+msgstr "別名："
+
+#: knetworkconf/kaddknownhostdlg.ui.h:91
+msgid "Add New Alias"
+msgstr "新增別名"
+
+#: knetworkconf/knetworkconf.cpp:66
 msgid "Could not load network configuration information."
 msgstr "無法載入網路設定資訊。"
 
-#: knetworkconf.cpp:67
+#: knetworkconf/knetworkconf.cpp:67
 msgid "Error Reading Configuration File"
 msgstr "讀取設定檔時發生錯誤。"
 
-#: knetworkconf.cpp:118 knetworkconf.cpp:756
+#: knetworkconf/knetworkconf.cpp:118 knetworkconf/knetworkconf.cpp:756
 msgid "Enabled"
 msgstr "開啟"
 
-#: knetworkconf.cpp:128 knetworkconf.cpp:770
+#: knetworkconf/knetworkconf.cpp:128 knetworkconf/knetworkconf.cpp:770
 msgid "Disabled"
 msgstr "關閉"
 
-#: knetworkconf.cpp:137 knetworkconf.cpp:304
+#: knetworkconf/knetworkconf.cpp:137 knetworkconf/knetworkconf.cpp:304
 msgid "Manual"
 msgstr "手動"
 
-#: knetworkconf.cpp:158
+#: knetworkconf/knetworkconf.cpp:158
 msgid ""
 "The new configuration has not been saved.\n"
 "Do you want to apply changes before quitting?"
@@ -43,62 +149,61 @@ msgstr ""
 "新的設定尚未儲存。\n"
 "您要在離開前先套用新設定嗎？"
 
-#: knetworkconf.cpp:159 knetworkconf.cpp:831 knetworkconf.cpp:850
+#: knetworkconf/knetworkconf.cpp:159 knetworkconf/knetworkconf.cpp:831
+#: knetworkconf/knetworkconf.cpp:850
 msgid "New Configuration Not Saved"
 msgstr "不要儲存"
 
-#: knetworkconf.cpp:206
+#: knetworkconf/knetworkconf.cpp:206
 msgid "Edit Server"
 msgstr "編輯伺服器"
 
-#: knetworkconf.cpp:233
+#: knetworkconf/knetworkconf.cpp:233
 #, c-format
 msgid "Configure Device %1"
 msgstr "設定設備 %1"
 
-#: knetworkconf.cpp:442
+#: knetworkconf/knetworkconf.cpp:442
 msgid "Could not open file '/etc/resolv.conf' for reading."
 msgstr "無法開啟 /etc/resolv.conf。"
 
-#: knetworkconf.cpp:443
+#: knetworkconf/knetworkconf.cpp:443
 msgid "Error Loading Config Files"
 msgstr "載入設定檔時發生錯誤"
 
-#: knetworkconf.cpp:590
+#: knetworkconf/knetworkconf.cpp:590
 msgid "The default Gateway IP address is invalid."
 msgstr "預設的閘道 IP 位址不正確。"
 
-#: kadddevicecontainer.cpp:129 kadddevicecontainer.cpp:132
-#: kadddevicecontainer.cpp:135 kadddevicecontainer.cpp:138
-#: kadddnsserverdlg.ui.h:42 kaddknownhostdlg.ui.h:25 knetworkconf.cpp:590
-msgid "Invalid IP Address"
-msgstr "不正確的 IP 位址"
-
-#: knetworkconf.cpp:681
+#: knetworkconf/knetworkconf.cpp:681
 msgid "Enabling interface <b>%1</b>"
 msgstr "開啟介面 <b>%1</b>"
 
-#: knetworkconf.cpp:683
+#: knetworkconf/knetworkconf.cpp:683
 msgid "Disabling interface <b>%1</b>"
 msgstr "關閉介面 <b>%1</b>"
 
-#: knetworkconf.cpp:717
+#: knetworkconf/knetworkconf.cpp:717
 msgid ""
-"Could not launch backend to change network device state. You will have to do it "
-"manually."
+"Could not launch backend to change network device state. You will have to do "
+"it manually."
 msgstr "無法叫出後端來更新網路設備的狀態。您必須手動執行。"
 
-#: knetworkconf.cpp:738
+#: knetworkconf/knetworkconf.cpp:718 knetworkconf/knetworkconf.cpp:1093
+msgid "Error"
+msgstr ""
+
+#: knetworkconf/knetworkconf.cpp:738
 msgid ""
 "There was an error changing the device's state. You will have to do it "
 "manually."
 msgstr "更改設備狀態時發生錯誤。您必須手動執行。"
 
-#: knetworkconf.cpp:739
+#: knetworkconf/knetworkconf.cpp:739
 msgid "Could Not Change Device State"
 msgstr "無法更改設備狀態"
 
-#: knetworkconf.cpp:830 knetworkconf.cpp:849
+#: knetworkconf/knetworkconf.cpp:830 knetworkconf/knetworkconf.cpp:849
 msgid ""
 "The new configuration has not been saved.\n"
 "Apply changes?"
@@ -106,80 +211,245 @@ msgstr ""
 "新的設定尚未儲存。\n"
 "您要套用新設定嗎？"
 
-#. i18n: file kaddknownhostdlg.ui line 16
-#: knetworkconf.cpp:867 rc.cpp:199
+#: knetworkconf/kaddknownhostdlg.ui:16 knetworkconf/knetworkconf.cpp:867
 #, no-c-format
 msgid "Add New Static Host"
 msgstr "新增靜態主機"
 
-#: knetworkconf.cpp:900
+#: knetworkconf/knetworkconf.cpp:900
 msgid "Edit Static Host"
 msgstr "編輯靜態主機"
 
-#: knetworkconf.cpp:1038
+#: knetworkconf/knetworkconf.cpp:1038
 msgid "Could not load the selected Network Profile."
 msgstr "無法載入選擇的網路設定檔。"
 
-#: knetworkconf.cpp:1039
+#: knetworkconf/knetworkconf.cpp:1039
 msgid "Error Reading Profile"
 msgstr "讀取設定檔時發生錯誤。"
 
-#: knetworkconf.cpp:1062
+#: knetworkconf/knetworkconf.cpp:1062
 msgid "Create New Network Profile"
 msgstr "建立新的網路設定檔"
 
-#: knetworkconf.cpp:1063
+#: knetworkconf/knetworkconf.cpp:1063
 msgid "Name of new profile:"
 msgstr "新的網路設定檔名稱："
 
-#: knetworkconf.cpp:1092
+#: knetworkconf/knetworkconf.cpp:1092
 msgid "There is already another profile with that name."
 msgstr "已經有一個相同名稱的設定檔了。"
 
-#. i18n: file kadddevicedlg.ui line 44
-#: rc.cpp:3
+#: knetworkconf/knetworkconfigparser.cpp:41
+#, fuzzy
+msgid ""
+"Could not find the backend script for the network configuration detection. "
+"Something is wrong with your installation.\n"
+" Please check that \n"
+"{TDE_PATH}/%1 \n"
+"file is present."
+msgstr ""
+"找不到偵測網路設定的後端文稿。您的系統可能有問題。\n"
+"請確定 {TDE_PATH}/%1 檔案存在。"
+
+#: knetworkconf/knetworkconfigparser.cpp:42
+msgid "Could Not Find Network Configuration Backend Script"
+msgstr "找不到網路設定的後端文稿"
+
+#: knetworkconf/knetworkconfigparser.cpp:65
+#: knetworkconf/knetworkconfigparser.cpp:95
+#: knetworkconf/knetworkconfigparser.cpp:320
+#: knetworkconf/knetworkconfigparser.cpp:1016
+msgid ""
+"Could not execute backend script for the network configuration detection. "
+"Something is wrong with your installation."
+msgstr "無法執行偵測網路設定的後端文稿。您的系統可能有問題。"
+
+#: knetworkconf/knetworkconfigparser.cpp:66
+#: knetworkconf/knetworkconfigparser.cpp:96
+#: knetworkconf/knetworkconfigparser.cpp:321
+#: knetworkconf/knetworkconfigparser.cpp:1017
+msgid "Could Not Launch Network Configuration Backend Script"
+msgstr "無法叫出網路設定後端文稿"
+
+#: knetworkconf/knetworkconfigparser.cpp:113
+#: knetworkconf/knetworkconfigparser.cpp:837
+msgid "Could not parse the XML output from the network configuration backend."
+msgstr "無法剖析網路設定後端的 XML 輸出。"
+
+#: knetworkconf/knetworkconfigparser.cpp:114
+msgid "Error While Listing Network Interfaces"
+msgstr "列出網路介面時發生錯誤"
+
+#: knetworkconf/knetworkconfigparser.cpp:191
+msgid "Could not open file /proc/net/route."
+msgstr "無法開啟檔案 /proc/net/route。"
+
+#: knetworkconf/knetworkconfigparser.cpp:192
+msgid "Could Not Open File"
+msgstr "無法開啟檔案"
+
+#: knetworkconf/knetworkconfigparser.cpp:303
+#: knetworkconf/kreloadnetworkdlg.ui:28
+#, no-c-format
+msgid "Reloading Network"
+msgstr "重新載入網路"
+
+#: knetworkconf/knetworkconfigparser.cpp:304
+msgid "%1Please wait while saving the network settings...%2"
+msgstr "%1請稍候，正在儲存網路設定...%2"
+
+#: knetworkconf/knetworkconfigparser.cpp:762
+msgid "Ethernet Network Device"
+msgstr "乙太網路設備"
+
+#: knetworkconf/knetworkconfigparser.cpp:764
+msgid "Wireless Network Device"
+msgstr "無線網路設備"
+
+#: knetworkconf/knetworkconfigparser.cpp:838
+msgid "Error Loading The Network Configuration"
+msgstr "載入網路設定時發生錯誤"
+
+#: knetworkconf/knetworkconfigparser.cpp:1030
+msgid ""
+"Could not parse the list of supported platforms from the network "
+"configuration backend."
+msgstr "無法剖析網路後端送來的支援平台清單。"
+
+#: knetworkconf/knetworkconfigparser.cpp:1031
+msgid "Error Obtaining Supported Platforms List"
+msgstr "取得支援平台清單時發生錯誤"
+
+#: knetworkconf/knetworkconfmodule.cpp:94
+msgid "KNetworkConf"
+msgstr "KNetworkConf"
+
+#: knetworkconf/knetworkconfmodule.cpp:97
+msgid "Lead Developer"
+msgstr "主要開發者"
+
+#: knetworkconf/knetworkconfmodule.cpp:99
+msgid "Provided the Network backend which KNetworkConf relies on."
+msgstr "提供 KNetworkConf 使用的網路後端。"
+
+#: knetworkconf/knetworkconfmodule.cpp:101
+msgid "Conectiva Linux Support"
+msgstr "Conectiva Linux 支援"
+
+#: knetworkconf/knetworkconfmodule.cpp:103
+msgid "Documentation maintainer, and German translator"
+msgstr "文件維護，德文翻譯"
+
+#: knetworkconf/knetworkconfmodule.cpp:105
+msgid "Various bugfixes and features"
+msgstr "修正許多錯誤與提供許多功能"
+
+#: knetworkconf/knetworkconfmodule.cpp:107
+msgid "Various bugfixes and Brazilian Portuguese translator"
+msgstr "修正許多錯誤，及巴西、葡萄牙翻譯"
+
+#: knetworkconf/knetworkconfmodule.cpp:113
+msgid ""
+"%1Network configuration%2This module allows you to configure your TCP/IP "
+"settings.%3"
+msgstr "%1網路設定%2這個模組允許您設定您的 TCP/IP。%3"
+
+#: knetworkconf/kprofileslistviewtooltip.h:84
+msgid "<b>Network Configuration of this Profile:</b>"
+msgstr "<b>此設定檔的網路設定：</b>"
+
+#: knetworkconf/kprofileslistviewtooltip.h:94
+#, c-format
+msgid "<p><b>Interface:</b> %1"
+msgstr "<p><b>介面：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:95
+#, c-format
+msgid "<br><b>Type:</b> %1"
+msgstr "<br><b>型態：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:101
+#, c-format
+msgid "<br><b>Boot Protocol:</b> %1"
+msgstr "<br><b>開機協定：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:104
+#, c-format
+msgid "<br><b>IP Address:</b>   %1"
+msgstr "<br><b>IP 位址：</b>   %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:105
+#, c-format
+msgid "<br><b>Broadcast Address:</b> %1"
+msgstr "<br><b>廣播位址：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:107
+#, c-format
+msgid "<br><b>On Boot:</b> %1"
+msgstr "<br><b>開機時啟動：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:111
+#, c-format
+msgid "</p><p><b>Default Gateway:</b>   %1"
+msgstr "</p><p><b>預設閘道：</b>   %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:113
+#, c-format
+msgid "<br><b>Domain Name:</b> %1"
+msgstr "<br><b>網域名稱：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:114
+#, c-format
+msgid "<br><b>Machine Name:</b> %1"
+msgstr "<br><b>機器名稱：</b> %1"
+
+#: knetworkconf/kprofileslistviewtooltip.h:118
+#, c-format
+msgid "<br><b>DNS Name Server:</b> %1"
+msgstr "<br><b>DNS 名稱伺服器：</b> %1"
+
+#: knetworkconf/version.h:5
+msgid ""
+"KNetworkConf - A Trinity Control Center module to configure TCP/IP settings."
+msgstr "KNetworkConf - TDE 控制中心的模組，用於設定 TCP/IP。"
+
+#: knetworkconf/kadddevicedlg.ui:44
 #, no-c-format
 msgid "Configure Interface"
 msgstr "設定介面"
 
-#. i18n: file kadddevicedlg.ui line 64
-#: rc.cpp:6
+#: knetworkconf/kadddevicedlg.ui:64
 #, no-c-format
 msgid "TCP/IP Address"
 msgstr "TCP/IP 位址"
 
-#. i18n: file kadddevicedlg.ui line 93
-#: rc.cpp:9
+#: knetworkconf/kadddevicedlg.ui:93
 #, no-c-format
 msgid "dhcp"
 msgstr "DHCP"
 
-#. i18n: file kadddevicedlg.ui line 98
-#: rc.cpp:12
+#: knetworkconf/kadddevicedlg.ui:98
 #, no-c-format
 msgid "bootp"
 msgstr "BOOTP"
 
-#. i18n: file kadddevicedlg.ui line 105
-#: rc.cpp:15 rc.cpp:18
+#: knetworkconf/kadddevicedlg.ui:105 knetworkconf/kadddevicedlg.ui:108
 #, no-c-format
 msgid "The boot protocol this network device should use"
 msgstr "這個網路設備使用的開機協定"
 
-#. i18n: file kadddevicedlg.ui line 133
-#: rc.cpp:21
+#: knetworkconf/kadddevicedlg.ui:133
 #, no-c-format
 msgid "Manual:"
 msgstr "手動："
 
-#. i18n: file kadddevicedlg.ui line 136
-#: rc.cpp:24
+#: knetworkconf/kadddevicedlg.ui:136
 #, no-c-format
 msgid "Use a static IP address. Use the fields below to enter the values"
 msgstr "使用靜態 IP 位址。請在下面的欄位輸入資料"
 
-#. i18n: file kadddevicedlg.ui line 140
-#: rc.cpp:27
+#: knetworkconf/kadddevicedlg.ui:139
 #, no-c-format
 msgid ""
 "<p>Sets this interface to use static IP settings.</p>\n"
@@ -189,842 +459,523 @@ msgstr ""
 "<p>設定這個介面使用靜態 IP。</p>\n"
 "<p>請在下面的欄位中輸入相關的資料。</p>"
 
-#. i18n: file kadddevicedlg.ui line 148
-#: rc.cpp:31
+#: knetworkconf/kadddevicedlg.ui:148
 #, no-c-format
 msgid "Automatic:"
 msgstr "自動："
 
-#. i18n: file kadddevicedlg.ui line 151
-#: rc.cpp:34
+#: knetworkconf/kadddevicedlg.ui:151
 #, no-c-format
 msgid "Use a dynamic IP address"
 msgstr "使用動態 IP 位址"
 
-#. i18n: file kadddevicedlg.ui line 156
-#: rc.cpp:37
+#: knetworkconf/kadddevicedlg.ui:154
 #, no-c-format
 msgid ""
 "<p>Using an dynamic IP address causes this device to get a free IP address "
 "automatically.</p>\n"
-"<p>The interface will try to contact an DHCP- or BOOTP-Server during the boot "
-"process.</p>\n"
+"<p>The interface will try to contact an DHCP- or BOOTP-Server during the "
+"boot process.</p>\n"
 "<p>Rendevouz is not supported yet.</p>"
 msgstr ""
 "<p>使用動態 IP 位址，網路設備會自動取得 IP 位址。</p>\n"
-"<p>此介面會在開機時試著去尋找 DHCP 或 BOOTP 伺服器。</p> "
-"<p>Rendevouz 尚未支援。</p>"
+"<p>此介面會在開機時試著去尋找 DHCP 或 BOOTP 伺服器。</p> <p>Rendevouz 尚未支"
+"援。</p>"
 
-#. i18n: file kadddevicedlg.ui line 184
-#: rc.cpp:42
+#: knetworkconf/kadddevicedlg.ui:184
 #, no-c-format
 msgid "Activate when the computer starts"
 msgstr "於電腦開機時啟動"
 
-#. i18n: file kadddevicedlg.ui line 187
-#: rc.cpp:45
+#: knetworkconf/kadddevicedlg.ui:187
 #, no-c-format
 msgid "Ensures that this interface gets activated during boot time"
 msgstr "確保在開機期間此介面已經被開啟。"
 
-#. i18n: file kadddevicedlg.ui line 191
-#: rc.cpp:48
+#: knetworkconf/kadddevicedlg.ui:190
 #, no-c-format
 msgid ""
 "<p>Ensures that this interface gets activated during boot time.</p>\n"
 "<p>Otherwise, you will have to active the interface manually after you have "
 "logged in after the boot process.</p>"
-msgstr "<p>確保在開機期間此介面已經被開啟。</p> <p>不然您就必須在開完機後登入系統，再手動啟動介面。</p>"
+msgstr ""
+"<p>確保在開機期間此介面已經被開啟。</p> <p>不然您就必須在開完機後登入系統，再"
+"手動啟動介面。</p>"
 
-#. i18n: file kadddevicedlg.ui line 197
-#: rc.cpp:52
+#: knetworkconf/kadddevicedlg.ui:197
 #, no-c-format
 msgid "255.255.255.0"
 msgstr "255.255.255.0"
 
-#. i18n: file kadddevicedlg.ui line 202
-#: rc.cpp:55
+#: knetworkconf/kadddevicedlg.ui:202
 #, no-c-format
 msgid "255.255.0.0"
 msgstr "255.255.0.0"
 
-#. i18n: file kadddevicedlg.ui line 207
-#: rc.cpp:58
+#: knetworkconf/kadddevicedlg.ui:207
 #, no-c-format
 msgid "255.0.0.0"
 msgstr "255.0.0.0"
 
-#. i18n: file kadddevicedlg.ui line 212
-#: rc.cpp:61
+#: knetworkconf/kadddevicedlg.ui:212
 #, no-c-format
 msgid "255.255.255.128"
 msgstr "255.255.255.128"
 
-#. i18n: file kadddevicedlg.ui line 217
-#: rc.cpp:64
+#: knetworkconf/kadddevicedlg.ui:217
 #, no-c-format
 msgid "255.255.255.192"
 msgstr "255.255.255.192"
 
-#. i18n: file kadddevicedlg.ui line 222
-#: rc.cpp:67
+#: knetworkconf/kadddevicedlg.ui:222
 #, no-c-format
 msgid "255.255.255.240"
 msgstr "255.255.255.240"
 
-#. i18n: file kadddevicedlg.ui line 227
-#: rc.cpp:70
+#: knetworkconf/kadddevicedlg.ui:227
 #, no-c-format
 msgid "255.255.255.248"
 msgstr "255.255.255.248"
 
-#. i18n: file kadddevicedlg.ui line 237
-#: rc.cpp:73
+#: knetworkconf/kadddevicedlg.ui:237
 #, no-c-format
 msgid "Subnetmask of the network device"
 msgstr "此網路設備的子網路遮罩："
 
-#. i18n: file kadddevicedlg.ui line 242
-#: rc.cpp:76
+#: knetworkconf/kadddevicedlg.ui:240
 #, no-c-format
 msgid ""
 "<p>Please enter the desired subnetmask for the interface here.</p>\n"
 "<p>For small private networks, 255.255.255.0 will most often be a reasonable "
 "default value.</p>\n"
-"<p>This field will change from a popup box to a combo box as soon as you enable "
-"the advanced settings below.</p>"
+"<p>This field will change from a popup box to a combo box as soon as you "
+"enable the advanced settings below.</p>"
 msgstr ""
 "<p>請輸入此介面的子網路遮罩。</p>\n"
 "<p>對某些小的私密網路而言，255.255.255.0 通常是合理的預設值。</p>\n"
 "<p>若您開啟進階設定的話，此欄位會有個選單可以選擇。</p>"
 
-#. i18n: file kadddevicedlg.ui line 284
-#: rc.cpp:81
+#: knetworkconf/kadddevicedlg.ui:284
 #, no-c-format
 msgid "Netmask:"
 msgstr "網路遮罩："
 
-#. i18n: file kadddevicedlg.ui line 287
-#: rc.cpp:84 rc.cpp:87
+#: knetworkconf/kadddevicedlg.ui:287 knetworkconf/kadddevicedlg.ui:290
 #, no-c-format
 msgid ""
-"The netmask defines a range of IP numbers which will build a subnet inside the "
-"network."
+"The netmask defines a range of IP numbers which will build a subnet inside "
+"the network."
 msgstr "網路遮罩定義子網路內可用的 IP 範圍。"
 
-#. i18n: file kadddevicedlg.ui line 301
-#: rc.cpp:90
+#: knetworkconf/kadddevicedlg.ui:301
 #, no-c-format
 msgid "IP address for the network device"
 msgstr "此網路設備的 IP 位址"
 
-#. i18n: file kadddevicedlg.ui line 311
-#: rc.cpp:93
+#: knetworkconf/kadddevicedlg.ui:304
 #, no-c-format
 msgid ""
 "<p>Here you should enter the IP address for the network interface.</p>\n"
-"<p>Please note: If your network is connected to the internet, you should only "
-"enter IP addresses you have been given by your provider.</p>\n"
+"<p>Please note: If your network is connected to the internet, you should "
+"only enter IP addresses you have been given by your provider.</p>\n"
 "<p>Otherwise, you should enter one of the IP addresses which are explicitly "
 "reserved for private use.</p>\n"
 "<p>Most small private networks use class C networks, which allow up to 255 "
 "computers in your network. So simply use addresses like 192.168.1.1, "
 "192.168.1.2, 192.168.1.171 and so on for your computers.</p>\n"
-"<p>Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13.</p>"
-"\n"
-"<p>Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5</p>\n"
+"<p>Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13."
+"</p>\n"
+"<p>Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5</"
+"p>\n"
 "<p>Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14</p>\n"
-"<p>Please ensure that all IP addresses you give to your computers are unique; "
-"you will have many problems if the same address is assigned to more than one "
-"network device.</p>"
+"<p>Please ensure that all IP addresses you give to your computers are "
+"unique; you will have many problems if the same address is assigned to more "
+"than one network device.</p>"
 msgstr ""
 "<p>請在此輸入網路介面的 IP 位址。</p>\n"
-"<p>請注意：如果您是連接到網際網路上，您應該輸入您的網路服務提供者給您的 IP 位址。</p>\n"
+"<p>請注意：如果您是連接到網際網路上，您應該輸入您的網路服務提供者給您的 IP 位"
+"址。</p>\n"
 "<p>否則，您應該輸入私密網路的位址。</p>\n"
-"<p>大部份小的私密網路使用的是 C class 的網路，允許 255 台電腦在同一個網域內。</p> "
-"<p>C class 網路：192.168.0.0 到 192.168.255.255，例如 192.168.0.13。</p>\n"
+"<p>大部份小的私密網路使用的是 C class 的網路，允許 255 台電腦在同一個網域內。"
+"</p> <p>C class 網路：192.168.0.0 到 192.168.255.255，例如 192.168.0.13。</"
+"p>\n"
 "<p>B class 網路：172.16.0.0 到 172.31.255.255，例如 172.28.2.5。</p>\n"
 "<p>A class 網路：10.0.0.0 到 10.255.255.255，例如 10.5.12.14。</p>\n"
 "<p>請確定您設定的 IP 位址不會跟別人衝突，否則您會遇到一大堆的麻煩。</p>"
 
-#. i18n: file kadddevicedlg.ui line 336
-#: rc.cpp:103 rc.cpp:184 rc.cpp:202 rc.cpp:286
+#: knetworkconf/kadddevicedlg.ui:336 knetworkconf/kadddnsserverdlg.ui:84
+#: knetworkconf/kaddknownhostdlg.ui:38 knetworkconf/knetworkconfdlg.ui:296
 #, no-c-format
 msgid "IP address:"
 msgstr "IP 位址："
 
-#. i18n: file kadddevicedlg.ui line 339
-#: rc.cpp:106 rc.cpp:109 rc.cpp:142 rc.cpp:145
+#: knetworkconf/kadddevicedlg.ui:339 knetworkconf/kadddevicedlg.ui:342
+#: knetworkconf/kadddevicedlgextension.ui:86
+#: knetworkconf/kadddevicedlgextension.ui:89
 #, no-c-format
 msgid ""
 "An IP address is an unique identifier of a networking device in an TCP/IP "
 "network"
 msgstr "IP 位址是在 TCP/IP 網路上用於辨識網路設備的代碼。"
 
-#. i18n: file kadddevicedlgextension.ui line 16
-#: rc.cpp:112
+#: knetworkconf/kadddevicedlgextension.ui:16
 #, no-c-format
 msgid "Advanced Options"
 msgstr "進階選項"
 
-#. i18n: file kadddevicedlgextension.ui line 27
-#: rc.cpp:115
+#: knetworkconf/kadddevicedlgextension.ui:27
 #, no-c-format
 msgid "Advanced Device Information"
 msgstr "進階設備資訊"
 
-#. i18n: file kadddevicedlgextension.ui line 30
-#: rc.cpp:118
+#: knetworkconf/kadddevicedlgextension.ui:30
 #, no-c-format
 msgid "Set advanced setting for the network device"
 msgstr "設定網路設備的進階設定"
 
-#. i18n: file kadddevicedlgextension.ui line 41
-#: rc.cpp:121
+#: knetworkconf/kadddevicedlgextension.ui:41
 #, no-c-format
 msgid "Description:"
 msgstr "描述："
 
-#. i18n: file kadddevicedlgextension.ui line 44
-#: rc.cpp:124 rc.cpp:133
+#: knetworkconf/kadddevicedlgextension.ui:44
+#: knetworkconf/kadddevicedlgextension.ui:69
 #, no-c-format
 msgid "IP address of the network device"
 msgstr "網路設備的 IP 位址"
 
-#. i18n: file kadddevicedlgextension.ui line 55
-#: rc.cpp:127 rc.cpp:130
+#: knetworkconf/kadddevicedlgextension.ui:55
+#: knetworkconf/kadddevicedlgextension.ui:58
 #, no-c-format
 msgid "Simply enter a short human-readable description for this device"
 msgstr "請簡短輸入此設備的描述"
 
-#. i18n: file kadddevicedlgextension.ui line 72
-#: rc.cpp:136
+#: knetworkconf/kadddevicedlgextension.ui:72
 #, no-c-format
 msgid ""
 "The Broadcast is a special address. All devices of a network respond if "
 "packages are sent to this address."
 msgstr "廣播位址是一個特殊位址，丟到此位址的封包，所有在此網路的設備都會收到。"
 
-#. i18n: file kadddevicedlgextension.ui line 80
-#: rc.cpp:139
+#: knetworkconf/kadddevicedlgextension.ui:80
 #, no-c-format
 msgid "Gateway:"
 msgstr "閘道位址："
 
-#. i18n: file kadddevicedlgextension.ui line 100
-#: rc.cpp:148
+#: knetworkconf/kadddevicedlgextension.ui:100
 #, no-c-format
 msgid "Default gateway for the network device"
 msgstr "網路設備的預設閘道位址"
 
-#. i18n: file kadddevicedlgextension.ui line 103
-#: rc.cpp:151
+#: knetworkconf/kadddevicedlgextension.ui:103
 #, no-c-format
 msgid ""
 "<p>Here you should enter the default gateway for the network device.</p>"
 msgstr "<p>您應該輸入網路設備的預設閘道位址。</p>"
 
-#. i18n: file kadddevicedlgextension.ui line 111
-#: rc.cpp:154
+#: knetworkconf/kadddevicedlgextension.ui:111
 #, no-c-format
 msgid "Broadcast:"
 msgstr "廣播："
 
-#. i18n: file kadddevicewifiext.ui line 18
-#: rc.cpp:157 rc.cpp:160
+#: knetworkconf/kadddevicewifiext.ui:18 knetworkconf/kadddevicewifiext.ui:32
 #, no-c-format
 msgid "Wireless Settings"
 msgstr "無線設定"
 
-#. i18n: file kadddevicewifiext.ui line 43
-#: rc.cpp:163
+#: knetworkconf/kadddevicewifiext.ui:43
 #, no-c-format
 msgid "WEP key:"
 msgstr "WEP 鍵值："
 
-#. i18n: file kadddevicewifiext.ui line 61
-#: rc.cpp:166
+#: knetworkconf/kadddevicewifiext.ui:61
 #, no-c-format
 msgid "ESSID:"
 msgstr "ESSID："
 
-#. i18n: file kadddevicewifiext.ui line 69
-#: rc.cpp:169
+#: knetworkconf/kadddevicewifiext.ui:69
 #, no-c-format
 msgid "Key type:"
 msgstr "鍵值型態："
 
-#. i18n: file kadddevicewifiext.ui line 75
-#: rc.cpp:172
+#: knetworkconf/kadddevicewifiext.ui:75
 #, no-c-format
 msgid "ASCII"
 msgstr "ASCII"
 
-#. i18n: file kadddevicewifiext.ui line 80
-#: rc.cpp:175
+#: knetworkconf/kadddevicewifiext.ui:80
 #, no-c-format
 msgid "Hexadecimal"
 msgstr "十六進位碼"
 
-#. i18n: file kadddnsserverdlg.ui line 28
-#: rc.cpp:178
+#: knetworkconf/kadddnsserverdlg.ui:28
 #, no-c-format
 msgid "Add New DNS Server"
 msgstr "新增 DNS 伺服器"
 
-#. i18n: file kadddnsserverdlg.ui line 59
-#: rc.cpp:181
+#: knetworkconf/kadddnsserverdlg.ui:59
 #, no-c-format
 msgid "IP address of the new DNS server"
 msgstr "新的 DNS 伺服器的 IP 位址"
 
-#. i18n: file kadddnsserverdlg.ui line 92
-#: rc.cpp:187
+#: knetworkconf/kadddnsserverdlg.ui:92
 #, no-c-format
 msgid "&Add"
 msgstr "新增(&A)"
 
-#. i18n: file kadddnsserverdlg.ui line 95
-#: rc.cpp:190
+#: knetworkconf/kadddnsserverdlg.ui:95
 #, no-c-format
 msgid "Add the server to the list"
 msgstr "新增伺服器到清單中"
 
-#. i18n: file kadddnsserverdlg.ui line 106
-#: rc.cpp:196
+#: knetworkconf/kadddnsserverdlg.ui:106
 #, no-c-format
 msgid "Forget it"
 msgstr "丟棄"
 
-#. i18n: file kaddknownhostdlg.ui line 154
-#: rc.cpp:211 rc.cpp:325
+#: knetworkconf/kaddknownhostdlg.ui:154 knetworkconf/knetworkconfdlg.ui:657
 #, no-c-format
 msgid "Aliases"
 msgstr "別名"
 
-#. i18n: file kaddknownhostdlg.ui line 184
-#: rc.cpp:214 rc.cpp:310 rc.cpp:328
+#: knetworkconf/kaddknownhostdlg.ui:184 knetworkconf/knetworkconfdlg.ui:571
+#: knetworkconf/knetworkconfdlg.ui:689
 #, no-c-format
 msgid "&Add..."
 msgstr "新增(&A)..."
 
-#. i18n: file kaddknownhostdlg.ui line 201
-#: rc.cpp:217 rc.cpp:313 rc.cpp:331
+#: knetworkconf/kaddknownhostdlg.ui:201 knetworkconf/knetworkconfdlg.ui:588
+#: knetworkconf/knetworkconfdlg.ui:706
 #, no-c-format
 msgid "&Edit..."
 msgstr "編輯(&E)..."
 
-#. i18n: file kdetectdistrodlg.ui line 16
-#: rc.cpp:223
+#: knetworkconf/kaddknownhostdlg.ui:218 knetworkconf/knetworkconfdlg.ui:605
+#: knetworkconf/knetworkconfdlg.ui:723
+#, no-c-format
+msgid "&Remove"
+msgstr ""
+
+#: knetworkconf/kdetectdistrodlg.ui:16
 #, no-c-format
 msgid "Detecting Your Current Platform"
 msgstr "偵測您目前的平台"
 
-#. i18n: file kdetectdistrodlg.ui line 60
-#: rc.cpp:226
+#: knetworkconf/kdetectdistrodlg.ui:60
 #, no-c-format
 msgid "Please wait while detecting your current platform..."
 msgstr "請稍候，正在偵測您目前的平台..."
 
-#. i18n: file kinterfaceupdowndlg.ui line 16
-#: rc.cpp:229
+#: knetworkconf/kinterfaceupdowndlg.ui:16
 #, no-c-format
 msgid "Changing Interface State"
 msgstr "更改介面狀態"
 
-#. i18n: file kinterfaceupdowndlg.ui line 64
-#: rc.cpp:232
+#: knetworkconf/kinterfaceupdowndlg.ui:64
 #, no-c-format
 msgid "Bringing up interface <b>eth0</b>..."
 msgstr "帶起介面<b>eth0</b>..."
 
-#. i18n: file knetworkconfdlg.ui line 36
-#: rc.cpp:235
+#: knetworkconf/knetworkconfdlg.ui:36
 #, no-c-format
 msgid "Network Settings"
 msgstr "網路設定"
 
-#. i18n: file knetworkconfdlg.ui line 42
-#: rc.cpp:238
+#: knetworkconf/knetworkconfdlg.ui:42
 #, no-c-format
 msgid "Configure your TCP/IP settings"
 msgstr "設定您的 TCP/IP"
 
-#. i18n: file knetworkconfdlg.ui line 45
-#: rc.cpp:241
+#: knetworkconf/knetworkconfdlg.ui:45
 #, no-c-format
 msgid "Change TCP/IP settings"
 msgstr "變更 TCP/IP 設定"
 
-#. i18n: file knetworkconfdlg.ui line 66
-#: rc.cpp:244
+#: knetworkconf/knetworkconfdlg.ui:66
 #, no-c-format
 msgid "Network Interfaces"
 msgstr "網路介面"
 
-#. i18n: file knetworkconfdlg.ui line 85
-#: rc.cpp:247
+#: knetworkconf/knetworkconfdlg.ui:85
 #, no-c-format
 msgid "Available Network Interfaces"
 msgstr "可用的網路介面"
 
-#. i18n: file knetworkconfdlg.ui line 110
-#: rc.cpp:250
+#: knetworkconf/knetworkconfdlg.ui:110
 #, no-c-format
 msgid "Interface"
 msgstr "介面"
 
-#. i18n: file knetworkconfdlg.ui line 121
-#: rc.cpp:253 rc.cpp:322
+#: knetworkconf/knetworkconfdlg.ui:121 knetworkconf/knetworkconfdlg.ui:646
 #, no-c-format
 msgid "IP Address"
 msgstr "IP 位址"
 
-#. i18n: file knetworkconfdlg.ui line 132
-#: rc.cpp:256
+#: knetworkconf/knetworkconfdlg.ui:132
 #, no-c-format
 msgid "Protocol"
 msgstr "協定"
 
-#. i18n: file knetworkconfdlg.ui line 143
-#: rc.cpp:259
+#: knetworkconf/knetworkconfdlg.ui:143
 #, no-c-format
 msgid "State"
 msgstr "狀態"
 
-#. i18n: file knetworkconfdlg.ui line 154
-#: rc.cpp:262
+#: knetworkconf/knetworkconfdlg.ui:154
 #, no-c-format
 msgid "Comment"
 msgstr "註解"
 
-#. i18n: file knetworkconfdlg.ui line 175
-#: rc.cpp:265
+#: knetworkconf/knetworkconfdlg.ui:175
 #, no-c-format
 msgid "List of configured network devices"
 msgstr "已設定網路設備清單"
 
-#. i18n: file knetworkconfdlg.ui line 194
-#: rc.cpp:268
+#: knetworkconf/knetworkconfdlg.ui:194
 #, no-c-format
 msgid "Configure Interface..."
 msgstr "設定介面..."
 
-#. i18n: file knetworkconfdlg.ui line 197
-#: rc.cpp:271
+#: knetworkconf/knetworkconfdlg.ui:197
 #, no-c-format
 msgid "Change the settings of the selected device"
 msgstr "更改已選擇設備的設定"
 
-#. i18n: file knetworkconfdlg.ui line 208
-#: rc.cpp:274
+#: knetworkconf/knetworkconfdlg.ui:208
 #, no-c-format
 msgid "Enable Interface"
 msgstr "開啟介面"
 
-#. i18n: file knetworkconfdlg.ui line 219
-#: rc.cpp:277
+#: knetworkconf/knetworkconfdlg.ui:219
 #, no-c-format
 msgid "Disable Interface"
 msgstr "關閉介面"
 
-#. i18n: file knetworkconfdlg.ui line 248
-#: rc.cpp:280
+#: knetworkconf/knetworkconfdlg.ui:248
 #, no-c-format
 msgid "Routes"
 msgstr "路由"
 
-#. i18n: file knetworkconfdlg.ui line 265
-#: rc.cpp:283
+#: knetworkconf/knetworkconfdlg.ui:265
 #, no-c-format
 msgid "Default Gateway"
 msgstr "預設閘道"
 
-#. i18n: file knetworkconfdlg.ui line 348
-#: rc.cpp:289
+#: knetworkconf/knetworkconfdlg.ui:348
 #, no-c-format
 msgid "Default Gateway IP address"
 msgstr "預設閘道 IP 位址"
 
-#. i18n: file knetworkconfdlg.ui line 373
-#: rc.cpp:292
+#: knetworkconf/knetworkconfdlg.ui:373
 #, no-c-format
 msgid "Device:"
 msgstr "設備："
 
-#. i18n: file knetworkconfdlg.ui line 401
-#: rc.cpp:295
+#: knetworkconf/knetworkconfdlg.ui:401
 #, no-c-format
 msgid "Network device where to send packets"
 msgstr "用哪個網路設備送出封包"
 
-#. i18n: file knetworkconfdlg.ui line 432
-#: rc.cpp:298
+#: knetworkconf/knetworkconfdlg.ui:432
 #, no-c-format
 msgid "Domain Name System"
 msgstr "網域名稱系統"
 
-#. i18n: file knetworkconfdlg.ui line 443
-#: rc.cpp:301
+#: knetworkconf/knetworkconfdlg.ui:443
 #, no-c-format
 msgid "Domain Name Servers"
 msgstr "網域名稱伺服器(DNS)"
 
-#. i18n: file knetworkconfdlg.ui line 499
-#: rc.cpp:304
+#: knetworkconf/knetworkconfdlg.ui:499
 #, no-c-format
 msgid "Move up the selected server on the list (higher priority)"
 msgstr "將選擇的伺服器往上移（較高優先順序）"
 
-#. i18n: file knetworkconfdlg.ui line 513
-#: rc.cpp:307
+#: knetworkconf/knetworkconfdlg.ui:513
 #, no-c-format
 msgid "Move down the selected server on the list (less priority)"
 msgstr "將選擇的伺服器往下移（較低優先順序）"
 
-#. i18n: file knetworkconfdlg.ui line 637
-#: rc.cpp:319
+#: knetworkconf/knetworkconfdlg.ui:637
 #, no-c-format
 msgid "Static Hosts"
 msgstr "靜態主機"
 
-#. i18n: file knetworkconfdlg.ui line 738
-#: rc.cpp:337
+#: knetworkconf/knetworkconfdlg.ui:738
 #, no-c-format
 msgid "Host name:"
 msgstr "主機名稱："
 
-#. i18n: file knetworkconfdlg.ui line 762
-#: rc.cpp:340
+#: knetworkconf/knetworkconfdlg.ui:762
 #, no-c-format
 msgid "Domain name:"
 msgstr "網域名稱："
 
-#. i18n: file knetworkconfdlg.ui line 772
-#: rc.cpp:343
+#: knetworkconf/knetworkconfdlg.ui:772
 #, no-c-format
 msgid "Network Profiles"
 msgstr "網路設定檔"
 
-#. i18n: file knetworkconfdlg.ui line 783
-#: rc.cpp:346
+#: knetworkconf/knetworkconfdlg.ui:783
 #, no-c-format
 msgid "Available Network Profiles"
 msgstr "可用的網路設定檔"
 
-#. i18n: file knetworkconfdlg.ui line 792
-#: rc.cpp:349
+#: knetworkconf/knetworkconfdlg.ui:792
 #, no-c-format
 msgid "Name"
 msgstr "名稱"
 
-#. i18n: file knetworkconfdlg.ui line 821
-#: rc.cpp:352
+#: knetworkconf/knetworkconfdlg.ui:821
 #, no-c-format
 msgid "&Load Selected"
 msgstr "載入選擇的(&L)"
 
-#. i18n: file knetworkconfdlg.ui line 829
-#: rc.cpp:355
+#: knetworkconf/knetworkconfdlg.ui:829
 #, no-c-format
 msgid "&Save Selected"
 msgstr "儲存選擇的(&S)"
 
-#. i18n: file knetworkconfdlg.ui line 837
-#: rc.cpp:358
+#: knetworkconf/knetworkconfdlg.ui:837
 #, no-c-format
 msgid "&Create New..."
 msgstr "建立新的(&C)..."
 
-#. i18n: file knetworkconfdlg.ui line 845
-#: rc.cpp:361
+#: knetworkconf/knetworkconfdlg.ui:845
 #, no-c-format
 msgid "&Delete Selected"
 msgstr "刪除選擇的(&D)"
 
-#. i18n: file kreloadnetworkdlg.ui line 28
-#: knetworkconfigparser.cpp:303 rc.cpp:364
-#, no-c-format
-msgid "Reloading Network"
-msgstr "重新載入網路"
-
-#. i18n: file kreloadnetworkdlg.ui line 112
-#: rc.cpp:370
+#: knetworkconf/kreloadnetworkdlg.ui:111
 #, no-c-format
 msgid ""
 "Please wait while the network is reloaded so\n"
 "the changes can take effect."
 msgstr "請稍候，等待網路重新載入，以便讓變更能生效。"
 
-#. i18n: file tdeselectdistrodlg.ui line 16
-#: rc.cpp:374
+#: knetworkconf/tdeselectdistrodlg.ui:16
 #, no-c-format
 msgid "Unsupported Platform"
 msgstr "不支援的平台"
 
-#. i18n: file tdeselectdistrodlg.ui line 69
-#: rc.cpp:383
+#: knetworkconf/tdeselectdistrodlg.ui:69
 #, no-c-format
 msgid "Do not ask again"
 msgstr "不要再詢問"
 
-#. i18n: file tdeselectdistrodlg.ui line 94
-#: rc.cpp:386
+#: knetworkconf/tdeselectdistrodlg.ui:94
 #, no-c-format
 msgid ""
-"<font size=\"+1\"><p align=\"center\"><b>Your Platform is Not Supported</b></p>"
-"</font>"
+"<font size=\"+1\"><p align=\"center\"><b>Your Platform is Not Supported</b></"
+"p></font>"
 msgstr "<font size=\"+1\"><p align=\"center\"><b>未支援您的平台</b></p></font>"
 
-#. i18n: file tdeselectdistrodlg.ui line 102
-#: rc.cpp:389
+#: knetworkconf/tdeselectdistrodlg.ui:102
 #, no-c-format
 msgid ""
-"You may choose one of the following supported platforms if you are <b>sure</b> "
-"your platform behaves the same as the chosen one. Please be sure, because your "
-"current network configuration could be damaged."
-msgstr "如果您<b>十分確定</b>您的平台的行為與以下的平台一樣，您可以選擇其中一個。但請您要十分確定，因為您的網路設定可能會損毀。"
-
-#: kadddevicecontainer.cpp:53
-msgid "&Advanced Settings"
-msgstr "進階設定(&A)"
-
-#: kadddevicecontainer.cpp:54 kadddevicecontainer.cpp:55
-msgid "Toggle between advanced and basic settings"
-msgstr "切換基本或進階設定"
-
-#: kadddevicecontainer.cpp:57
-msgid "Apply changes"
-msgstr "套用變更"
-
-#: kadddevicecontainer.cpp:59
-msgid "Forget changes"
-msgstr "丟棄變更"
-
-#: kadddevicecontainer.cpp:129 kadddnsserverdlg.ui.h:42
-#: kaddknownhostdlg.ui.h:25
-msgid "The format of the specified IP address is not valid."
-msgstr "指定的 IP 位址格式不正確。"
-
-#: kadddevicecontainer.cpp:132
-msgid "The format of the specified netmask is not valid."
-msgstr "網路遮罩格式不正確。"
-
-#: kadddevicecontainer.cpp:135
-msgid "The format of the specified broadcast is not valid."
-msgstr "網路廣播位址格式不正確。"
-
-#: kadddevicecontainer.cpp:138
-msgid "The format of the specified Gateway is not valid."
-msgstr "閘道位址格式不正確。"
-
-#: kadddevicecontainer.cpp:174
-msgid "Basic Settings"
-msgstr "基本設定"
-
-#: kadddevicecontainer.cpp:179
-msgid "Advanced Settings"
-msgstr "進階設定"
-
-#: kprofileslistviewtooltip.h:84
-msgid "<b>Network Configuration of this Profile:</b>"
-msgstr "<b>此設定檔的網路設定：</b>"
-
-#: kprofileslistviewtooltip.h:94
-#, c-format
-msgid "<p><b>Interface:</b> %1"
-msgstr "<p><b>介面：</b> %1"
-
-#: kprofileslistviewtooltip.h:95
-#, c-format
-msgid "<br><b>Type:</b> %1"
-msgstr "<br><b>型態：</b> %1"
-
-#: kprofileslistviewtooltip.h:101
-#, c-format
-msgid "<br><b>Boot Protocol:</b> %1"
-msgstr "<br><b>開機協定：</b> %1"
-
-#: kprofileslistviewtooltip.h:104
-#, c-format
-msgid "<br><b>IP Address:</b>   %1"
-msgstr "<br><b>IP 位址：</b>   %1"
-
-#: kprofileslistviewtooltip.h:105
-#, c-format
-msgid "<br><b>Broadcast Address:</b> %1"
-msgstr "<br><b>廣播位址：</b> %1"
-
-#: kprofileslistviewtooltip.h:107
-#, c-format
-msgid "<br><b>On Boot:</b> %1"
-msgstr "<br><b>開機時啟動：</b> %1"
-
-#: kprofileslistviewtooltip.h:111
-#, c-format
-msgid "</p><p><b>Default Gateway:</b>   %1"
-msgstr "</p><p><b>預設閘道：</b>   %1"
-
-#: kprofileslistviewtooltip.h:113
-#, c-format
-msgid "<br><b>Domain Name:</b> %1"
-msgstr "<br><b>網域名稱：</b> %1"
-
-#: kprofileslistviewtooltip.h:114
-#, c-format
-msgid "<br><b>Machine Name:</b> %1"
-msgstr "<br><b>機器名稱：</b> %1"
-
-#: kprofileslistviewtooltip.h:118
-#, c-format
-msgid "<br><b>DNS Name Server:</b> %1"
-msgstr "<br><b>DNS 名稱伺服器：</b> %1"
-
-#: kaddknownhostdlg.ui.h:29
-msgid "You must add at least one alias for the specified IP address."
-msgstr "您必須為這個 IP 位址至少指定一個別名。"
-
-#: kaddknownhostdlg.ui.h:29
-msgid "Insufficient Aliases"
-msgstr "不適當的別名"
-
-#: kaddknownhostdlg.ui.h:63
-msgid "Edit Alias"
-msgstr "編輯別名"
-
-#: kaddknownhostdlg.ui.h:64 kaddknownhostdlg.ui.h:92
-msgid "Alias:"
-msgstr "別名："
-
-#: kaddknownhostdlg.ui.h:91
-msgid "Add New Alias"
-msgstr "新增別名"
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Frank Weng (a.k.a. Franklin)"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "franklin at goodhorse dot idv dot tw"
-
-#: version.h:5
-msgid ""
-"KNetworkConf - A Trinity Control Center module to configure TCP/IP settings."
-msgstr "KNetworkConf - TDE 控制中心的模組，用於設定 TCP/IP。"
-
-#: knetworkconfmodule.cpp:94
-msgid "KNetworkConf"
-msgstr "KNetworkConf"
-
-#: knetworkconfmodule.cpp:97
-msgid "Lead Developer"
-msgstr "主要開發者"
-
-#: knetworkconfmodule.cpp:99
-msgid "Provided the Network backend which KNetworkConf relies on."
-msgstr "提供 KNetworkConf 使用的網路後端。"
-
-#: knetworkconfmodule.cpp:101
-msgid "Conectiva Linux Support"
-msgstr "Conectiva Linux 支援"
-
-#: knetworkconfmodule.cpp:103
-msgid "Documentation maintainer, and German translator"
-msgstr "文件維護，德文翻譯"
-
-#: knetworkconfmodule.cpp:105
-msgid "Various bugfixes and features"
-msgstr "修正許多錯誤與提供許多功能"
-
-#: knetworkconfmodule.cpp:107
-msgid "Various bugfixes and Brazilian Portuguese translator"
-msgstr "修正許多錯誤，及巴西、葡萄牙翻譯"
-
-#: knetworkconfmodule.cpp:113
-msgid ""
-"%1Network configuration%2This module allows you to configure your TCP/IP "
-"settings.%3"
-msgstr "%1網路設定%2這個模組允許您設定您的 TCP/IP。%3"
-
-#: kadddnsserverdlg.ui.h:54
-msgid "You have to type an alias first."
-msgstr "您必須先輸入一個別名。"
-
-#: kadddnsserverdlg.ui.h:54
-msgid "Invalid Text"
-msgstr "不合法的文字"
-
-#: knetworkconfigparser.cpp:41
-#, fuzzy
-msgid ""
-"Could not find the backend script for the network configuration detection. "
-"Something is wrong with your installation.\n"
-" Please check that \n"
-"{TDE_PATH}/%1 \n"
-"file is present."
+"You may choose one of the following supported platforms if you are <b>sure</"
+"b> your platform behaves the same as the chosen one. Please be sure, because "
+"your current network configuration could be damaged."
 msgstr ""
-"找不到偵測網路設定的後端文稿。您的系統可能有問題。\n"
-"請確定 {TDE_PATH}/%1 檔案存在。"
-
-#: knetworkconfigparser.cpp:42
-msgid "Could Not Find Network Configuration Backend Script"
-msgstr "找不到網路設定的後端文稿"
-
-#: knetworkconfigparser.cpp:65 knetworkconfigparser.cpp:95
-#: knetworkconfigparser.cpp:320 knetworkconfigparser.cpp:1016
-msgid ""
-"Could not execute backend script for the network configuration detection. "
-"Something is wrong with your installation."
-msgstr "無法執行偵測網路設定的後端文稿。您的系統可能有問題。"
-
-#: knetworkconfigparser.cpp:66 knetworkconfigparser.cpp:96
-#: knetworkconfigparser.cpp:321 knetworkconfigparser.cpp:1017
-msgid "Could Not Launch Network Configuration Backend Script"
-msgstr "無法叫出網路設定後端文稿"
-
-#: knetworkconfigparser.cpp:113 knetworkconfigparser.cpp:837
-msgid "Could not parse the XML output from the network configuration backend."
-msgstr "無法剖析網路設定後端的 XML 輸出。"
-
-#: knetworkconfigparser.cpp:114
-msgid "Error While Listing Network Interfaces"
-msgstr "列出網路介面時發生錯誤"
-
-#: knetworkconfigparser.cpp:191
-msgid "Could not open file /proc/net/route."
-msgstr "無法開啟檔案 /proc/net/route。"
-
-#: knetworkconfigparser.cpp:192
-msgid "Could Not Open File"
-msgstr "無法開啟檔案"
-
-#: knetworkconfigparser.cpp:304
-msgid "%1Please wait while saving the network settings...%2"
-msgstr "%1請稍候，正在儲存網路設定...%2"
-
-#: knetworkconfigparser.cpp:762
-msgid "Ethernet Network Device"
-msgstr "乙太網路設備"
-
-#: knetworkconfigparser.cpp:764
-msgid "Wireless Network Device"
-msgstr "無線網路設備"
-
-#: knetworkconfigparser.cpp:838
-msgid "Error Loading The Network Configuration"
-msgstr "載入網路設定時發生錯誤"
-
-#: knetworkconfigparser.cpp:1030
-msgid ""
-"Could not parse the list of supported platforms from the network configuration "
-"backend."
-msgstr "無法剖析網路後端送來的支援平台清單。"
-
-#: knetworkconfigparser.cpp:1031
-msgid "Error Obtaining Supported Platforms List"
-msgstr "取得支援平台清單時發生錯誤"
+"如果您<b>十分確定</b>您的平台的行為與以下的平台一樣，您可以選擇其中一個。但請"
+"您要十分確定，因為您的網路設定可能會損毀。"