Automated l10n update (.po files)

1 files changed, 1438 insertions, 1415 deletions

diff --git a/tde-i18n-zh_TW/messages/tdesdk/tdecachegrind.po b/tde-i18n-zh_TW/messages/tdesdk/tdecachegrind.po
index bdd2657aeda..d7b56dc4dfe 100644
--- a/tde-i18n-zh_TW/messages/tdesdk/tdecachegrind.po
+++ b/tde-i18n-zh_TW/messages/tdesdk/tdecachegrind.po
@@ -6,180 +6,344 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: tdecachegrind\n"
-"POT-Creation-Date: 2008-07-08 01:21+0200\n"
+"POT-Creation-Date: 2014-09-29 00:48-0500\n"
 "PO-Revision-Date: 2007-10-03 10:39+0800\n"
 "Last-Translator: Chih-Wei Huang <cwhuang@linux.org.tw>\n"
 "Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.4\n"
 
-#: instritem.cpp:106 sourceitem.cpp:86
-msgid "Active call to '%1'"
-msgstr "使用中到 %1 的呼叫"
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin),Franklin Weng"
 
-#: instritem.cpp:108 sourceitem.cpp:88
+#: _translatorinfo.cpp:3
 msgid ""
-"_n: %n call to '%1'\n"
-"%n calls to '%1'"
-msgstr "%n 個到 %1 的呼叫"
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
 
-#: instritem.cpp:137
-msgid "Jump %1 of %2 times to 0x%3"
-msgstr "跳躍到 0x%3 %1 次，共要 %2 次"
+#: cachegrindloader.cpp:141
+msgid "Import filter for Cachegrind/Callgrind generated profile data files"
+msgstr "Cachegrind/Callgrind 產生的分析檔資料檔匯入過濾器"
 
-#: instritem.cpp:142
-msgid "Jump %1 times to 0x%2"
-msgstr "跳躍到 0x%2 %1 次"
+#: cachegrindloader.cpp:738
+#, c-format
+msgid "Loading %1"
+msgstr "載入 %1 中"
 
-#: instritem.cpp:185 sourceitem.cpp:169
-msgid "(cycle)"
-msgstr "（循環）"
+#: tabview.cpp:64
+msgid "Move to Top"
+msgstr "移動到頂端"
 
-#: tracedata.cpp:157
-msgid "Abstract Item"
-msgstr "抽象項目"
+#: tabview.cpp:68
+msgid "Move to Right"
+msgstr "移動到右方"
 
-#: tracedata.cpp:158
-msgid "Cost Item"
-msgstr "花費項目"
+#: tabview.cpp:72
+msgid "Move to Bottom"
+msgstr "移動到底端"
 
-#: tracedata.cpp:159
-msgid "Part Source Line"
-msgstr "源碼行部件"
+#: tabview.cpp:76
+msgid "Move to Bottom Left"
+msgstr "移動到左下方"
 
-#: tracedata.cpp:160
-msgid "Source Line"
-msgstr "源碼行"
+#: tabview.cpp:77 tabview.cpp:94 treemap.cpp:2908
+msgid "Bottom Left"
+msgstr "左下方"
 
-#: tracedata.cpp:161
-msgid "Part Line Call"
-msgstr "行呼叫部件"
+#: tabview.cpp:79
+msgid "Move Area To"
+msgstr "移動區域到"
 
-#: tracedata.cpp:162
-msgid "Line Call"
-msgstr "行呼叫"
+#: tabview.cpp:81
+msgid "Hide This Tab"
+msgstr "隱藏此分頁"
 
-#: tracedata.cpp:163
-msgid "Part Jump"
-msgstr "跳躍部件"
+#: tabview.cpp:82
+msgid "Hide Area"
+msgstr "隱藏範圍"
 
-#: tracedata.cpp:164
-msgid "Jump"
-msgstr "跳躍"
+#: tabview.cpp:95
+msgid "Show Hidden On"
+msgstr "顯示隱藏於"
 
-#: tracedata.cpp:165
-msgid "Part Instruction"
-msgstr "指令部件"
+#: tabview.cpp:242
+msgid "(No profile data file loaded)"
+msgstr "（沒有載入分析資料檔）"
 
-#: tracedata.cpp:166
-msgid "Instruction"
-msgstr "指令"
+#: tabview.cpp:281
+msgid "Types"
+msgstr "類型"
 
-#: tracedata.cpp:167
-msgid "Part Instruction Jump"
-msgstr "指令跳躍部件"
+#: tabview.cpp:284
+msgid "Callers"
+msgstr "呼叫者"
 
-#: tracedata.cpp:168
-msgid "Instruction Jump"
-msgstr "指令跳躍"
+#: tabview.cpp:287
+msgid "All Callers"
+msgstr "所有呼叫者"
 
-#: tracedata.cpp:169
-msgid "Part Instruction Call"
-msgstr "指令呼叫部件"
+#: tabview.cpp:290
+msgid "Caller Map"
+msgstr "呼叫者地圖"
 
-#: tracedata.cpp:170
-msgid "Instruction Call"
-msgstr "指令呼叫"
+#: tabview.cpp:293
+msgid "Source"
+msgstr "來源"
 
-#: tracedata.cpp:171
-msgid "Part Call"
-msgstr "呼叫部件"
+#: tabview.cpp:297
+msgid "Parts"
+msgstr "部件"
 
-#: tracedata.cpp:172
-msgid "Call"
-msgstr "呼叫"
+#: tabview.cpp:300
+msgid "Call Graph"
+msgstr "呼叫圖"
 
-#: tracedata.cpp:173
-msgid "Part Function"
-msgstr "函式部件"
+#: tabview.cpp:303
+msgid "Callees"
+msgstr "被呼叫者"
 
-#: tracedata.cpp:174
-msgid "Function Source File"
-msgstr "函式源碼檔案"
+#: tabview.cpp:306
+msgid "All Callees"
+msgstr "所有被呼叫者"
 
-#. i18n: file dumpselectionbase.ui line 300
-#: rc.cpp:144 rc.cpp:273 rc.cpp:318 rc.cpp:342 tracedata.cpp:175
-#, no-c-format
-msgid "Function"
-msgstr "函式"
+#: tabview.cpp:310
+msgid "Callee Map"
+msgstr "被呼叫者地圖"
 
-#: tracedata.cpp:176
-msgid "Function Cycle"
-msgstr "函式循環"
+#: instrview.cpp:131 tabview.cpp:313
+msgid "Assembler"
+msgstr "組譯器"
 
-#: tracedata.cpp:177
-msgid "Part Class"
-msgstr "類別部件"
+#: tabview.cpp:553
+msgid ""
+"<b>Information Tabs</b>"
+"<p>This widget shows information for the current selected function in different "
+"tabs: "
+"<ul>"
+"<li>The Costs tab shows a list of available event types and the inclusive and "
+"self costs regarding to these types.</li>"
+"<li>The Parts tab shows a list of trace parts if the trace consists of more "
+"than one part (otherwise, this tab is hided). The cost of the selected function "
+"spent in the different parts together with the calls happening is shown.</li>"
+"<li>The Call Lists tab shows direct callers and callees of the function in more "
+"detail.</li>"
+"<li>The Coverage tab shows the same is the Call Lists tab, but not only direct "
+"callers and callees but also indirect ones.</li>"
+"<li>The Call Graph tab shows a graphical visualization of the calls done by "
+"this function.</li>"
+"<li>The Source tab presents annotated source code if debugging information and "
+"the source file is available.</li>"
+"<li>The Assembler tab presents annotated assembler code if trace information on "
+"instruction level is available.</li></ul>For more information, see the <em>"
+"What's This?</em> help of the corresponding tab widget</p>"
+msgstr ""
+"<b>資訊分頁</b>"
+"<p>本畫面以不同分頁顯示目前所選擇函數的資訊： "
+"<ul>"
+"<li>「花費」分頁顯示可用的事件型態清單，以及它們的引入與自身花費。</li>"
+"<li>「部件」分頁在有一個以上的追蹤時顯示追蹤部件清單。（若只有一個則會隱藏此分頁。）也會顯示選取的函式在不同的部件，以及呼叫的花費。</li>"
+"<li>「呼叫清單」分頁顯示此函式內直接呼叫的函式，與直接呼叫此函式的函式詳情。</li>"
+"<li>「總體呼叫」分頁顯示的跟「呼叫清單」差不多，不過還包括間接呼叫。</li>"
+"<li>「呼叫圖」分頁顯示此函式與呼叫者之間的圖形關係。</li>"
+"<li>「源碼」分頁在除錯資訊與程式源碼檔可用時顯示源碼。</li>"
+"<li>「組合」分頁顯示追蹤資訊的機械碼。</li></ul>更多詳情可以參考「這是什麼？」的說明元件。</p>"
 
-#: tracedata.cpp:178
-msgid "Class"
-msgstr "類別"
+#: tabview.cpp:630
+msgid "(No Data loaded)"
+msgstr "（沒有載入資料）"
 
-#: tracedata.cpp:179
-msgid "Part Source File"
-msgstr "程式源碼檔案部件"
+#: tabview.cpp:631
+msgid "(No function selected)"
+msgstr "（沒有選取函式）"
 
-#: tracedata.cpp:180
-msgid "Source File"
-msgstr "程式源碼檔案"
+#: tips.txt:3
+msgid ""
+"<p>...that the <em>What's This?</em> help for every GUI widget\n"
+"in KCachegrind contains detailed usage information for this widget?\n"
+"It is highly recommended to read at least these help texts on first\n"
+"use. Request <em>What's This?</em> help by pressing\n"
+"Shift+F1 and clicking on the widget.</p>\n"
+msgstr ""
+"<p>每個使用者介面元件中的「這是什麼？」說明內含了此元件的詳細用法資訊。建議第一次使用時先閱讀它。您以可以按 Shift+F1 叫出。</p>\n"
 
-#: tracedata.cpp:181
-msgid "Part ELF Object"
-msgstr "ELF 物件部件"
+#: tips.txt:12
+msgid ""
+"<p>...that you can get profile information at instruction level\n"
+"with Calltree when you provide the option <em>--dump-instr=yes</em>?\n"
+"Use the Assembler View for the instruction annotations.\n"
+"</p>\n"
+msgstr ""
+"<p>若您提供這個選項：<em>--dump-instr=yes</em>，您可以在呼叫樹模式取得指令層級的分析檔資訊。\n"
+"用「組譯器檢視」取得指令的註記。</p>\n"
 
-#: tracedata.cpp:182
-msgid "ELF Object"
-msgstr "ELF 物件"
+#: tips.txt:20
+msgid ""
+"<p>...that you can use Alt-Left/Right keys of your keyboard to go\n"
+"back/forward in the active object history ?</p>\n"
+msgstr ""
+"<p>您可以用 Alt 加上左右鍵來在目前的物件歷史中往返。</p>\n"
 
-#: partview.cpp:46 tracedata.cpp:183
-msgid "Profile Part"
-msgstr "分析檔部件"
+#: tips.txt:26
+msgid ""
+"<p>...that you can navigate in the Callee/Caller Map View using\n"
+"arrow keys? Use Left/Right to change to siblings of the current\n"
+"item; use Up/Down to go one nesting level up/down. To select\n"
+"the current item, press Space, and to activate it, press Return.\n"
+"</p>\n"
+msgstr ""
+"<p>您可以用方向鍵在呼叫者/被呼叫者地圖中導覽。用左右鍵來跳到相鄰的節點，上下鍵則在不同的巢狀等級間來回。要選取目前的項目，您可以按空白鍵，按下 Enter "
+"鍵則是啟用。</p>\n"
 
-#: tracedata.cpp:184
-msgid "Program Trace"
-msgstr "程式追蹤"
+#: tips.txt:35
+msgid ""
+"<p>...that you can navigate in the Call Graph View using\n"
+"arrow keys? Use Up/Down to go one calling level up/down, alternating\n"
+"between calls and functions. Use Left/Right to change to siblings of a current\n"
+"selected call. To activate the current item, press Return.\n"
+"</p>\n"
+msgstr ""
+"<p>您可以用方向鍵在呼叫圖檢視中導覽。用左右鍵來跳到與目前選取的呼叫相鄰的節點，上下鍵則在不同的呼叫等級間來回，切換呼叫函式。按下 Enter "
+"鍵則是啟用目前的項目。</p>\n"
 
-#: tracedata.cpp:245
-msgid "%1 from %2"
-msgstr "%1 從 %2"
+#: tips.txt:44
+msgid ""
+"<p>...that you can rapidly locate a function by entering part of its\n"
+"name (case-insensitive) into the edit line of the toolbar\n"
+"and hit return?</p>\n"
+msgstr ""
+"<p>您可以在工具列的編輯欄中輸入某函式的部份名稱（不分大小寫），再按下 Enter 鍵就可以快速找到該函式的位置。</p>\n"
 
-#: partgraph.cpp:423 tracedata.cpp:253 tracedata.cpp:258 tracedata.cpp:2828
-#: tracedata.cpp:3245 tracedata.cpp:3331 tracedata.cpp:4169 tracedata.cpp:4177
-#: tracedata.cpp:4242
-msgid "(unknown)"
-msgstr "（未知）"
+#: tips.txt:51
+msgid ""
+"<p>...that you can assign custom colors to \n"
+"ELF objects/C++ Classes/Source Files for graph coloring\n"
+"in <em>Settings->Configure KCachegrind...</em>?</p>\n"
+msgstr ""
+"<p>您可以指定自訂的顏色給圖形中的 ELF 物件、C++ 類別或源碼檔。您只要在「設定」─「設定 KCachegrind...」中設定即可。</p>\n"
 
-#: tracedata.cpp:2587
-msgid "(no caller)"
-msgstr "（無呼叫者）"
+#: tips.txt:58
+msgid ""
+"<p>...that you can see if debug info is available for a selected \n"
+"function by looking at the location label in the Info tab or\n"
+"the source listing header in the source tab?</p>\n"
+"<p>There must be the name of the source file (with extension).\n"
+"If KCachegrind still doesn't show the source, make sure that you\n"
+"have added the directory of the source file to the\n"
+"<em>Source Directories</em> list in the configuration.\n"
+msgstr ""
+"<p>如果有提供除錯資訊的話，您可以在資訊分頁中的「位置」標籤處，或是源碼分頁處的源碼標頭處看到所選取函式的除錯資訊。</p>\n"
+"<p>必須要有源碼檔的檔名（包括副檔名）。如果 KCachegrind 還是沒有顯示源碼，請確定您已將源碼檔所在的路徑加到設定中的「源碼目錄」清單中。</p>"
+"\n"
 
-#: tracedata.cpp:2594 tracedata.cpp:2613
-msgid "%1 via %2"
-msgstr "%1 經過 %2"
+#: tips.txt:69
+msgid ""
+"<p>...that you can configure whether KCachgrind should\n"
+"show absolute event counts or relative ones (percentage display)?</p>\n"
+msgstr ""
+"<p>您可以設定是否要讓 KCachegrind 顯示絕對事件計數或相對事件計數（以百分比顯示）。</p>\n"
 
-#: tracedata.cpp:2603
-msgid "(no callee)"
-msgstr "（無被呼叫者）"
+#: tips.txt:75
+msgid ""
+"<p>...that you can configure the maximum number of items\n"
+"for all function lists in KCachegrind? Limiting the number\n"
+"of items is done to get a fast reacting GUI. The last item in\n"
+"the list will show you the number of skipped functions, together\n"
+"with a cost condition for these skipped functions.</p>\n"
+"<p>To activate a function with small costs, search for it and select\n"
+"it in the flat profile. Selecting functions with small cost will\n"
+"temporarily add them to the flat profile list.</p>\n"
+msgstr ""
+"<p>您可以在 KCachegrind "
+"中設定所有函式清單中的最大顯示數目。這樣的話，清單中的最後一個項目會顯示出還有多少函式未顯示出來，以及這些未顯示函式的花費。</p>\n"
+"<p>要啟動較少花費的函式，您可以搜尋並在簡單分析檔中選取。這樣會暫時新增到簡單分析檔清單中。</p>\n"
 
-#: tracedata.cpp:4471
-msgid "(not found)"
-msgstr "（未找到）"
+#: tips.txt:87
+msgid ""
+"<p>...that the Coverage tab - in contrast to the Call Lists tab -\n"
+"shows <em>all</em> functions that are calling the selected function\n"
+"(upper part) / are called by the selected function (bottom part),\n"
+"no matter how many function are between them on the stack?</p>\n"
+"<p>Examples:</p>\n"
+"<p>An entry in the upper list for function foo1() with a value of 50%\n"
+"with function bar() selected means that 50% of all the cost of function\n"
+"bar() happened while called from function foo1().</p>\n"
+"<p>An entry in the bottom list for function foo2() with a value of 50%\n"
+"with function bar() selected means that 50% of all the cost of function\n"
+"bar() happened while calling foo2() from bar().</p>\n"
+msgstr ""
+"<p>「總體呼叫頁」顯示的是呼叫選取的函式的所有函式（上半部），以及被選取的函式呼叫的函式（下半部），包括直接與間接呼叫。</p>\n"
+"<p>例如：</p>\n"
+"<p>選取函式 bar()，上半部清單中的函式 foo1() 數值 50% 表示從 foo1() 呼叫 bar() 時的花費佔全部花費的 50%。</p>\n"
+"<p>下半部清單中的函式 foo2() 數值 50% 表示 bar() 呼叫 foo2() 時的花費佔全部花費的 50%。</p>\n"
 
-#: tracedata.cpp:5021
-msgid "Recalculating Function Cycles..."
-msgstr "重新計算函式循環..."
+#: tips.txt:102
+msgid ""
+"<p>...that waiting for the tool tip inside of a tree map\n"
+"shows the list of names of the nested rectangles the mouse\n"
+"pointer is over?</p>\n"
+"<p>Items from this list can be selected by pressing the right\n"
+"mouse button.</p>\n"
+msgstr ""
+"<p>滑鼠指標指在樹狀地圖中上頭時稍等一下，會跑出逼個工具提示，裡面會顯示巢狀矩形的名稱清單。</p>\n"
+"<p>清單中的項目可以用滑鼠右鍵選取。</p>\n"
+
+#: tips.txt:111
+msgid ""
+"<p>...that you can constrain the cost counts shown to only a\n"
+"few parts of the whole trace by selecting these parts in the\n"
+"\"Trace Selection\" Dockable?</p>\n"
+"<p>To generate multiple parts in a profiling run with\n"
+"cachegrind, use e.g. option --cachedumps=xxx for parts\n"
+"of a length of xxx basic blocks (A basic block is a run\n"
+"of not-branching assembler statements inside of your program\n"
+"code).</p>\n"
+msgstr ""
+"<p>您可以限制只顯示一小部份部件的花費計數，只要在「追蹤選擇」元件中選取這些部件即可。</p>\n"
+"<p>要在 cachegrind 的分析執行中產生多個部件，可以用像這樣的選項：--cachedumps=xxx 表示 xxx "
+"個基本區塊。（基本區塊是在您的程式碼中不分支的組譯敘述）。</p>\n"
+
+#. i18n: file dumpselectionbase.ui line 824
+#: configdlg.cpp:58 rc.cpp:249
+#, no-c-format
+msgid "ELF Objects"
+msgstr "ELF 物件"
+
+#: configdlg.cpp:60
+msgid "Source Files"
+msgstr "程式源碼檔案"
+
+#: configdlg.cpp:61
+msgid "C++ Classes"
+msgstr "C++ 類別"
+
+#: configdlg.cpp:62
+msgid "Function (no Grouping)"
+msgstr "功能（無群組）"
+
+#: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371
+msgid "(always)"
+msgstr "（總是）"
+
+#: configdlg.cpp:210
+msgid "KCachegrind Configuration"
+msgstr "KCachegrind 設定"
+
+#: configdlg.cpp:211
+msgid ""
+"The Maximum Number of List Items should be below 500.The previous set value "
+"(%1) will still be used."
+msgstr "最大的清單項目數應該在 500 以下。將改用之前的設定值（%1）。"
+
+#: configdlg.cpp:384
+msgid "Choose Source Folder"
+msgstr "選擇來源資料夾"
 
 #. i18n: file dumpselectionbase.ui line 550
 #: callmapview.cpp:59 partselection.cpp:58 rc.cpp:192
@@ -222,11 +386,11 @@ msgstr "隱藏已選取的部件"
 msgid "Unhide Hidden Parts"
 msgstr "重新顯示隱藏的部件"
 
-#: partselection.cpp:302 toplevel.cpp:1692
+#: partselection.cpp:302 toplevel.cpp:1687
 msgid "Go Back"
 msgstr "返回"
 
-#: callgraphview.cpp:2571 partselection.cpp:320
+#: callgraphview.cpp:2570 partselection.cpp:320
 msgid "Visualization"
 msgstr "視覺化"
 
@@ -282,9 +446,203 @@ msgstr "顯示資訊"
 msgid "(no trace loaded)"
 msgstr "（未載入追蹤）"
 
-#: costtypeview.cpp:42
-msgid "Event Type"
-msgstr "事件類型"
+#. i18n: file dumpselectionbase.ui line 950
+#: callmapview.cpp:61 rc.cpp:276 rc.cpp:321
+#, no-c-format
+msgid "Location"
+msgstr "位置"
+
+#. i18n: file dumpselectionbase.ui line 754
+#: callmapview.cpp:63 rc.cpp:234 rc.cpp:339
+#, no-c-format
+msgid "Calls"
+msgstr "呼叫"
+
+#: callmapview.cpp:98
+msgid ""
+"<b>Caller Map</b>"
+"<p>This graph shows the nested hierarchy of all callers of the current "
+"activated function. Each colored rectangle represents a function; its size "
+"tries to be proportional to the cost spent therein while the active function is "
+"running (however, there are drawing constrains).</p>"
+msgstr ""
+"<b>呼叫者地圖</b> "
+"<p>這個圖形顯示目前活躍的函式所有呼叫者的巢狀架構。每個彩色的矩形表示一個函式，大小會與該函式執行時的花費成比例。（不過畫圖形時會有所限制，所以是盡量成比例）"
+"。</p>"
+
+#: callmapview.cpp:105
+msgid ""
+"<b>Call Map</b>"
+"<p>This graph shows the nested hierarchy of all callees of the current "
+"activated function. Each colored rectangle represents a function; its size "
+"tries to be proportional to the cost spent therein while the active function is "
+"running (however, there are drawing constrains).</p>"
+msgstr ""
+"<b>呼叫地圖</b> "
+"<p>這個圖形顯示目前活躍的函式所有呼叫的巢狀架構。每個彩色的矩形表示一個函式，大小會與該函式執行時的花費成比例。（不過畫圖形時會有所限制，所以是盡量成比例）。"
+"</p>"
+
+#: callmapview.cpp:113
+msgid ""
+"<p>Appearance options can be found in the in the context menu. To get exact "
+"size proportions, choose 'Hide incorrect borders'. As this mode can be <em>"
+"very</em> time consuming, you may want to limit the maximum drawn nesting level "
+"before. 'Best' determinates the split direction for children from the aspect "
+"ratio of the parent. 'Always Best' decides on remaining space for each sibling. "
+"'Ignore Proportions' takes space for function name drawing <em>before</em> "
+"drawing children. Note that size proportions can get <em>heavily</em> wrong.</p>"
+"<p>This is a <em>TreeMap</em> widget. Keyboard navigation is available with the "
+"left/right arrow keys for traversing siblings, and up/down arrow keys to go a "
+"nesting level up/down. <em>Return</em> activates the current item.</p>"
+msgstr ""
+"<p>外觀選項可以在選單中找到。要取得精準的大小比例，選擇「隱藏不正確的框線」。這個模式可能會<em>非常</em>"
+"花時間，您可能要先限制一下最多的巢狀等級。「最佳」會依父函式的比例來分離子函式的方向。「總是最佳」會依剩餘空間來決定。「忽略比例」會在畫子函式前先保留函式名稱空"
+"間。注意大小的比例有可能會錯得很離譜。</p> "
+"<p>有一種「樹狀地圖」元件。可以用鍵盤左右鍵來導覽所有的子節點，上下鍵則可以進出巢狀等級。Enter 鍵會啟動目前的項目。</p>"
+
+#: callmapview.cpp:167
+msgid "Go To"
+msgstr "跳到"
+
+#: callmapview.cpp:184
+msgid "Stop at Depth"
+msgstr "停止於深度"
+
+#: callmapview.cpp:187 treemap.cpp:3101
+msgid "No Depth Limit"
+msgstr "沒有深度限制"
+
+#: callmapview.cpp:190
+msgid "Depth 10"
+msgstr "深度 10"
+
+#: callmapview.cpp:192
+msgid "Depth 15"
+msgstr "深度 15"
+
+#: callmapview.cpp:194
+msgid "Depth 20"
+msgstr "深度 20"
+
+#: callmapview.cpp:198 treemap.cpp:3107
+msgid "Depth of '%1' (%2)"
+msgstr "%1 的深度（%2）"
+
+#: callmapview.cpp:204
+msgid "Decrement Depth (to %1)"
+msgstr "遞減深度（到 %1）"
+
+#: callmapview.cpp:205
+msgid "Increment Depth (to %1)"
+msgstr "遞增深度（到 %1）"
+
+#: callmapview.cpp:209
+msgid "Stop at Function"
+msgstr "停止於函式"
+
+#: callmapview.cpp:210
+msgid "No Function Limit"
+msgstr "無函式限制"
+
+#: callmapview.cpp:240
+msgid "Stop at Area"
+msgstr "停止於區域"
+
+#: callmapview.cpp:243 treemap.cpp:3039
+msgid "No Area Limit"
+msgstr "沒有區域限制"
+
+#: callmapview.cpp:246
+msgid "50 Pixels"
+msgstr "50 像素"
+
+#: callmapview.cpp:248
+msgid "100 Pixels"
+msgstr "100 像素"
+
+#: callmapview.cpp:250
+msgid "200 Pixels"
+msgstr "200 像素"
+
+#: callmapview.cpp:252
+msgid "500 Pixels"
+msgstr "500 像素"
+
+#: callmapview.cpp:258 treemap.cpp:3045
+msgid "Area of '%1' (%2)"
+msgstr "%1 的區域 (%2)"
+
+#: callmapview.cpp:264 treemap.cpp:3071
+msgid "Double Area Limit (to %1)"
+msgstr "將區域限制加倍（到 %1）"
+
+#: callmapview.cpp:266
+msgid "Half Area Limit (to %1)"
+msgstr "將區域限制減半（到 %1）"
+
+#: callmapview.cpp:273
+msgid "Visualisation"
+msgstr "視覺化"
+
+#: callmapview.cpp:277
+msgid "Split Direction"
+msgstr "分割方向"
+
+#: callmapview.cpp:279
+msgid "Skip Incorrect Borders"
+msgstr "略過不正確的邊框"
+
+#: callmapview.cpp:284
+msgid "Border Width"
+msgstr "邊框寬度"
+
+#: callmapview.cpp:285
+msgid "Border 0"
+msgstr "邊框 0"
+
+#: callmapview.cpp:288
+msgid "Border 1"
+msgstr "邊框 1"
+
+#: callmapview.cpp:290
+msgid "Border 2"
+msgstr "邊框 2"
+
+#: callmapview.cpp:292
+msgid "Border 3"
+msgstr "邊框 3"
+
+#: callmapview.cpp:297
+msgid "Draw Symbol Names"
+msgstr "繪製符號名稱"
+
+#: callmapview.cpp:298
+msgid "Draw Cost"
+msgstr "繪製花費"
+
+#: callmapview.cpp:299
+msgid "Draw Location"
+msgstr "繪製位置"
+
+#: callmapview.cpp:300
+msgid "Draw Calls"
+msgstr "繪製呼叫"
+
+#: callmapview.cpp:321 treemap.cpp:2889
+msgid "Shading"
+msgstr "遮蔽"
+
+#: callmapview.cpp:431
+msgid "Call Map: Current is '%1'"
+msgstr "呼叫映射：目前是 %1"
+
+#: callmapview.cpp:599
+msgid "(no function)"
+msgstr "（無函式）"
+
+#: callmapview.cpp:741 callmapview.cpp:858
+msgid "(no call)"
+msgstr "（無呼叫）"
 
 #. i18n: file dumpselectionbase.ui line 917
 #: costtypeview.cpp:43 coverageview.cpp:46 partview.cpp:47 rc.cpp:267
@@ -293,6 +651,20 @@ msgstr "事件類型"
 msgid "Incl."
 msgstr "引入"
 
+#: coverageview.cpp:48 coverageview.cpp:54
+msgid "Distance"
+msgstr "距離"
+
+#. i18n: file dumpselectionbase.ui line 928
+#: coverageview.cpp:49 partview.cpp:49 rc.cpp:270 rc.cpp:315
+#, no-c-format
+msgid "Called"
+msgstr "已呼叫"
+
+#: callview.cpp:48 coverageview.cpp:50
+msgid "Caller"
+msgstr "呼叫者"
+
 #. i18n: file functionselectionbase.ui line 62
 #: costtypeview.cpp:44 coverageview.cpp:53 partview.cpp:48 rc.cpp:303
 #: rc.cpp:312
@@ -300,86 +672,290 @@ msgstr "引入"
 msgid "Self"
 msgstr "自身"
 
-#: costtypeview.cpp:45
-msgid "Short"
-msgstr "短"
+#: coverageview.cpp:55
+msgid "Calling"
+msgstr "呼叫中"
 
-#: costtypeview.cpp:47
-msgid "Formula"
-msgstr "公式"
+#: callview.cpp:52 coverageview.cpp:56
+msgid "Callee"
+msgstr "被呼叫者"
 
-#: costtypeview.cpp:81
+#: coverageview.cpp:90
 msgid ""
-"<b>Cost Types List</b>"
-"<p>This list shows all cost types available and what the self/inclusive cost of "
-"the current selected function is for that cost type.</p>"
-"<p>By choosing a cost type from the list, you change the cost type of costs "
-"shown all over KCachegrind to be the selected one.</p>"
+"<b>List of all Callers</b>"
+"<p>This list shows all functions calling the current selected one, either "
+"directly or with several functions in-between on the stack; the number of "
+"functions in-between plus one is called the <em>Distance</em> "
+"(e.g. for function A,B,C there exists a call from A to C when A calls B and B "
+"calls C, i.e. A => B => C. The distance here is 2).</p>"
+"<p>Absolute cost shown is the cost spent in the selected function while a "
+"listed function is active; relative cost is the percentage of all cost spent in "
+"the selected function while the listed one is active. The cost graphic shows "
+"logarithmic percentage with a different color for each distance.</p>"
+"<p>As there can be many calls from the same function, the distance column "
+"sometimes shows the range of distances for all calls happening; then, in "
+"parentheses, there is the medium distance, i.e. the distance where most of the "
+"call costs happened.</p>"
+"<p>Selecting a function makes it the current selected one of this information "
+"panel. If there are two panels (Split mode), the function of the other panel is "
+"changed instead.</p>"
 msgstr ""
-"<b>花費類型清單</b>"
-"<p>這份清單顯示所有可用的花費類型（cost type）以及目前所選取的函式在該類型的自身與引入的花費。</p> "
-"<p>選取其中一種類型，您可以改變所有 KCachegrind 的花費成為該類型。</p>"
+"<b>所有呼叫者清單</b> "
+"<p>此清單顯示目前選取函式的所有呼叫者函式，包括直接呼叫與間接呼叫。間接呼叫的數字加一稱為「距離」（例如，函式 A 呼叫函式 B，函式 B 又呼叫函式 "
+"C，則函式 A 到 C 的距離為 2）</p> "
+"<p>顯示的「絕對花費」是當一個已列出的所選函式使用時的花費；「相對花費」是此函式相對於所有已選函式的花費。花費圖形以對每個距離以不同顏色顯示對數百分比。</p"
+"> "
+"<p>因為有可能同一個函式中會有許多呼叫，距離欄位有時會顯示所有發生呼叫的函式的距離範圍，這種狀況下，括弧中顯示的是平均距離，也就是發生呼叫最多花費的地方。</"
+"p> "
+"<p>選擇某函式可以看每個函式的資訊。如果在分割模式下的兩個面板，會在另一個面板改變。</p>"
 
-#: costtypeview.cpp:98
-msgid "Set Secondary Event Type"
-msgstr "設定次要事件類型"
+#: coverageview.cpp:120
+msgid ""
+"<b>List of all Callees</b>"
+"<p>This list shows all functions called by the current selected one, either "
+"directly or with several function in-between on the stack; the number of "
+"function in-between plus one is called the <em>Distance</em> "
+"(e.g. for function A,B,C there exists a call from A to C when A calls B and B "
+"calls C, i.e. A => B => C. The distance here is 2).</p>"
+"<p>Absolute cost shown is the cost spent in the listed function while the "
+"selected is active; relative cost is the percentage of all cost spent in the "
+"listed function while the selected one is active. The cost graphic always shows "
+"logarithmic percentage with a different color for each distance.</p>"
+"<p>As there can be many calls to the same function, the distance column "
+"sometimes shows the range of distances for all calls happening; then, in "
+"parentheses, there is the medium distance, i.e. the distance where most of the "
+"call costs happened.</p>"
+"<p>Selecting a function makes it the current selected one of this information "
+"panel. If there are two panels (Split mode), the function of the other panel is "
+"changed instead.</p>"
+msgstr ""
+"<b>被呼叫者清單</b>"
+"<p>這份清單顯示所有被目前選取的函式呼叫的函式，包括直接與間接呼叫。間接呼叫的數字加一稱為「距離」（例如，函式 A 呼叫函式 B，函式 B 又呼叫函式 "
+"C，則函式 A 到 C 的距離為 2）</p> "
+"<p>顯示的「絕對花費」是當一個已列出的所選函式使用時的花費；「相對花費」是此函式相對於所有已選函式的花費。花費圖形以對每個距離以不同顏色顯示對數百分比。</p"
+"> "
+"<p>因為有可能同一個函式中會有許多呼叫，距離欄位有時會顯示所有發生呼叫的函式的距離範圍，這種狀況下，括弧中顯示的是平均距離，也就是發生呼叫最多花費的地方。</"
+"p> "
+"<p>選擇某函式可以看每個函式的資訊。如果在分割模式下的兩個面板，會在另一個面板改變。</p>"
 
-#: costtypeview.cpp:100
-msgid "Remove Secondary Event Type"
-msgstr "移除次要事件類型"
+#: callgraphview.cpp:2396 callgraphview.cpp:2400 callgraphview.cpp:2418
+#: callview.cpp:123 callview.cpp:128 coverageview.cpp:166 instrview.cpp:191
+#: sourceview.cpp:116
+msgid "Go to '%1'"
+msgstr "跳到 %1"
 
-#: costtypeview.cpp:105
-msgid "Edit Long Name"
-msgstr "編輯長名稱"
+#: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52
+msgid "Cost 2"
+msgstr "花費 2"
 
-#: costtypeview.cpp:106
-msgid "Edit Short Name"
-msgstr "編輯短名稱"
+#: callview.cpp:47 callview.cpp:51
+msgid "Count"
+msgstr "計數"
 
-#: costtypeview.cpp:107
-msgid "Edit Formula"
-msgstr "編輯公式"
+#: callview.cpp:85
+msgid ""
+"<b>List of direct Callers</b>"
+"<p>This list shows all functions calling the current selected one directly, "
+"together with a call count and the cost spent in the current selected function "
+"while being called from the function from the list.</p>"
+"<p>An icon instead of an inclusive cost specifies that this is a call inside of "
+"a recursive cycle. An inclusive cost makes no sense here.</p>"
+"<p>Selecting a function makes it the current selected one of this information "
+"panel. If there are two panels (Split mode), the function of the other panel is "
+"changed instead.</p>"
+msgstr ""
+"<b>直接呼叫者清單</b> "
+"<p>這個清單顯示直接呼叫目前選取函式的所有函式，以及呼叫次數與呼叫花費。</p> "
+"<p>如果顯示一圖示而非引入花費，則表示這個呼叫是在遞迴循環之中。引入花費在此沒有意義。</p> "
+"<p>選擇某個函式會在目前資訊面板的顯示中跳到該函式。如果有兩個面板（分割模式），則會變換另一個面板的函式。</p>"
 
-#: costtypeview.cpp:115
-msgid "New Cost Type ..."
-msgstr "新增花費類型..."
+#: callview.cpp:98
+msgid ""
+"<b>List of direct Callees</b>"
+"<p>This list shows all functions called by the current selected one directly, "
+"together with a call count and the cost spent in this function while being "
+"called from the selected function.</p>"
+"<p>Selecting a function makes it the current selected one of this information "
+"panel. If there are two panels (Split mode), the function of the other panel is "
+"changed instead.</p>"
+msgstr ""
+"<b>直接被呼叫者清單</b> "
+"<p>這個清單顯示目前選取函式直接呼叫的所有函式，以及呼叫次數與呼叫花費。</p> "
+"<p>選擇某個函式會在目前資訊面板的顯示中跳到該函式。如果有兩個面板（分割模式），則會變換另一個面板的函式。</p>"
 
-#: costtypeview.cpp:149 costtypeview.cpp:154
-#, c-format
-msgid "New%1"
-msgstr "新增%1"
+#: instritem.cpp:106 sourceitem.cpp:86
+msgid "Active call to '%1'"
+msgstr "使用中到 %1 的呼叫"
 
-#: costtypeview.cpp:155
-#, c-format
-msgid "New Cost Type %1"
-msgstr "新增花費類型 %1"
+#: instritem.cpp:108 sourceitem.cpp:88
+msgid ""
+"_n: %n call to '%1'\n"
+"%n calls to '%1'"
+msgstr "%n 個到 %1 的呼叫"
 
-#: sourceitem.cpp:125
-msgid "Jump %1 of %2 times to %3"
-msgstr "跳到 %3 %1 次，總共需要 %2 次"
+#: instritem.cpp:137
+msgid "Jump %1 of %2 times to 0x%3"
+msgstr "跳躍到 0x%3 %1 次，共要 %2 次"
 
-#: sourceitem.cpp:130
-msgid "Jump %1 times to %2"
-msgstr "跳躍到 %2 %1 次"
+#: instritem.cpp:142
+msgid "Jump %1 times to 0x%2"
+msgstr "跳躍到 0x%2 %1 次"
 
-#: costlistitem.cpp:60
-#, c-format
-msgid ""
-"_n: (%n item skipped)\n"
-"(%n items skipped)"
-msgstr "略過 %n 個項目"
+#: instritem.cpp:185 sourceitem.cpp:169
+msgid "(cycle)"
+msgstr "（循環）"
 
-#: traceitemview.cpp:53
-msgid "No description available"
-msgstr "沒有可用的描述"
+#: tracedata.cpp:153
+msgid "Abstract Item"
+msgstr "抽象項目"
+
+#: tracedata.cpp:154
+msgid "Cost Item"
+msgstr "花費項目"
+
+#: tracedata.cpp:155
+msgid "Part Source Line"
+msgstr "源碼行部件"
+
+#: tracedata.cpp:156
+msgid "Source Line"
+msgstr "源碼行"
+
+#: tracedata.cpp:157
+msgid "Part Line Call"
+msgstr "行呼叫部件"
+
+#: tracedata.cpp:158
+msgid "Line Call"
+msgstr "行呼叫"
+
+#: tracedata.cpp:159
+msgid "Part Jump"
+msgstr "跳躍部件"
+
+#: tracedata.cpp:160
+msgid "Jump"
+msgstr "跳躍"
+
+#: tracedata.cpp:161
+msgid "Part Instruction"
+msgstr "指令部件"
+
+#: tracedata.cpp:162
+msgid "Instruction"
+msgstr "指令"
+
+#: tracedata.cpp:163
+msgid "Part Instruction Jump"
+msgstr "指令跳躍部件"
+
+#: tracedata.cpp:164
+msgid "Instruction Jump"
+msgstr "指令跳躍"
+
+#: tracedata.cpp:165
+msgid "Part Instruction Call"
+msgstr "指令呼叫部件"
+
+#: tracedata.cpp:166
+msgid "Instruction Call"
+msgstr "指令呼叫"
+
+#: tracedata.cpp:167
+msgid "Part Call"
+msgstr "呼叫部件"
+
+#: tracedata.cpp:168
+msgid "Call"
+msgstr "呼叫"
+
+#: tracedata.cpp:169
+msgid "Part Function"
+msgstr "函式部件"
+
+#: tracedata.cpp:170
+msgid "Function Source File"
+msgstr "函式源碼檔案"
+
+#. i18n: file dumpselectionbase.ui line 300
+#: rc.cpp:144 rc.cpp:273 rc.cpp:318 rc.cpp:342 tracedata.cpp:171
+#, no-c-format
+msgid "Function"
+msgstr "函式"
+
+#: tracedata.cpp:172
+msgid "Function Cycle"
+msgstr "函式循環"
+
+#: tracedata.cpp:173
+msgid "Part Class"
+msgstr "類別部件"
+
+#: tracedata.cpp:174
+msgid "Class"
+msgstr "類別"
+
+#: tracedata.cpp:175
+msgid "Part Source File"
+msgstr "程式源碼檔案部件"
+
+#: tracedata.cpp:176
+msgid "Source File"
+msgstr "程式源碼檔案"
+
+#: tracedata.cpp:177
+msgid "Part ELF Object"
+msgstr "ELF 物件部件"
+
+#: tracedata.cpp:178
+msgid "ELF Object"
+msgstr "ELF 物件"
+
+#: partview.cpp:46 tracedata.cpp:179
+msgid "Profile Part"
+msgstr "分析檔部件"
+
+#: tracedata.cpp:180
+msgid "Program Trace"
+msgstr "程式追蹤"
+
+#: tracedata.cpp:241
+msgid "%1 from %2"
+msgstr "%1 從 %2"
+
+#: partgraph.cpp:423 tracedata.cpp:249 tracedata.cpp:254 tracedata.cpp:2824
+#: tracedata.cpp:3241 tracedata.cpp:3327 tracedata.cpp:4165 tracedata.cpp:4173
+#: tracedata.cpp:4238
+msgid "(unknown)"
+msgstr "（未知）"
+
+#: tracedata.cpp:2583
+msgid "(no caller)"
+msgstr "（無呼叫者）"
+
+#: tracedata.cpp:2590 tracedata.cpp:2609
+msgid "%1 via %2"
+msgstr "%1 經過 %2"
+
+#: tracedata.cpp:2599
+msgid "(no callee)"
+msgstr "（無被呼叫者）"
+
+#: tracedata.cpp:4467
+msgid "(not found)"
+msgstr "（未找到）"
+
+#: tracedata.cpp:5017
+msgid "Recalculating Function Cycles..."
+msgstr "重新計算函式循環..."
 
 #. i18n: file partselectionbase.ui line 16
-#: rc.cpp:324 toplevel.cpp:281 toplevel.cpp:581
+#: rc.cpp:324 toplevel.cpp:276 toplevel.cpp:576
 #, no-c-format
 msgid "Parts Overview"
 msgstr "部件概觀"
 
-#: toplevel.cpp:288
+#: toplevel.cpp:283
 msgid ""
 "<b>The Parts Overview</b>"
 "<p>A trace consists of multiple trace parts when there are several profile data "
@@ -408,11 +984,11 @@ msgstr ""
 "<li>被呼叫者（Callee）模式：顯示一個矩形，代表此追蹤部件裡目前所選取的函式的總花費。這裡面又分成小矩形，代表每個被呼叫者的花費。</li></ul>"
 "</p>"
 
-#: toplevel.cpp:318
+#: toplevel.cpp:313
 msgid "Top Cost Call Stack"
 msgstr "頂端花費呼叫堆疊"
 
-#: toplevel.cpp:320
+#: toplevel.cpp:315
 msgid ""
 "<b>The Top Cost Call Stack</b>"
 "<p>This is a purely fictional 'most probable' call stack. It is built up by "
@@ -425,11 +1001,11 @@ msgstr ""
 "<p>這只是純虛構的「最有可能的」呼叫堆疊。它是從目前選取的函式開始，針對每個呼叫者與被呼叫者的最高花費放到堆疊中。</p> "
 "<p><b>花費</b>與<b>呼叫</b>欄位顯示呼叫所使用的花費。</p>"
 
-#: toplevel.cpp:333
+#: toplevel.cpp:328
 msgid "Flat Profile"
 msgstr "簡單分析檔"
 
-#: toplevel.cpp:343
+#: toplevel.cpp:338
 msgid ""
 "<b>The Flat Profile</b>"
 "<p>The flat profile contains a group and a function selection list. The group "
@@ -446,12 +1022,12 @@ msgstr ""
 "<p>函式清單則包含了所選取的群組的函式，（如果群組型態為「函式」則包含所有的函式），依花費排序。花費少於 1% 的則預設為隱藏。</p>"
 
 #. i18n: file dumpselectionbase.ui line 16
-#: rc.cpp:84 toplevel.cpp:357 toplevel.cpp:609
+#: rc.cpp:84 toplevel.cpp:352 toplevel.cpp:604
 #, no-c-format
 msgid "Profile Dumps"
 msgstr "分析檔傾印"
 
-#: toplevel.cpp:367
+#: toplevel.cpp:362
 msgid ""
 "<b>Profile Dumps</b>"
 "<p>This dockable shows in the top part the list of loadable profile dumps in "
@@ -491,88 +1067,88 @@ msgstr ""
 "<li><b>狀態</b>只對目前執行中的分析檔有用。按下「更新」可以看執行中的計數器，程式堆疊目前的位置。檢查每一個選項，讓 KCachegrind "
 "可以常規性地輪詢這些資料。檢查同步選項讓此元件同步。</li></ul></p>"
 
-#: toplevel.cpp:455
+#: toplevel.cpp:450
 msgid "&Duplicate"
 msgstr "複製(&D)"
 
-#: toplevel.cpp:459
+#: toplevel.cpp:454
 msgid ""
 "<b>Duplicate Current Layout</b>"
 "<p>Make a copy of the current layout.</p>"
 msgstr "<b>複製目前的佈局</b><p>複製目前的佈局。</p>"
 
-#: toplevel.cpp:466
+#: toplevel.cpp:461
 msgid ""
 "<b>Remove Current Layout</b>"
 "<p>Delete current layout and make the previous active.</p>"
 msgstr "<b>移除目前的佈局</b><p>刪除目前的佈局，並回到上一個。</p>"
 
-#: toplevel.cpp:470
+#: toplevel.cpp:465
 msgid "&Go to Next"
 msgstr "跳到下一個(&G)"
 
-#: toplevel.cpp:474
+#: toplevel.cpp:469
 msgid "Go to Next Layout"
 msgstr "跳到下一個佈局"
 
-#: toplevel.cpp:477
+#: toplevel.cpp:472
 msgid "&Go to Previous"
 msgstr "跳到上一個(&G)"
 
-#: toplevel.cpp:481
+#: toplevel.cpp:476
 msgid "Go to Previous Layout"
 msgstr "跳到上一個佈局"
 
-#: toplevel.cpp:484
+#: toplevel.cpp:479
 msgid "&Restore to Default"
 msgstr "還原預設值(&R)"
 
-#: toplevel.cpp:487
+#: toplevel.cpp:482
 msgid "Restore Layouts to Default"
 msgstr "還原佈局預設值"
 
-#: toplevel.cpp:490
+#: toplevel.cpp:485
 msgid "&Save as Default"
 msgstr "儲存為預設值(&S)"
 
-#: toplevel.cpp:493
+#: toplevel.cpp:488
 msgid "Save Layouts as Default"
 msgstr "儲存佈局為預設值"
 
-#: toplevel.cpp:504
+#: toplevel.cpp:499
 msgid "<b>New</b><p>Open new empty KCachegrind window.</p>"
 msgstr "<b>新增</b><p>開啟新的空白 KCachegrind 視窗。</p>"
 
-#: toplevel.cpp:507
+#: toplevel.cpp:502
 msgid "&Add..."
 msgstr "新增(&A)..."
 
-#: toplevel.cpp:510
+#: toplevel.cpp:505
 msgid ""
 "<b>Add Profile Data</b>"
 "<p>This opens an additional profile data file in the current window.</p>"
 msgstr "<b>新增分析檔資料</b> <p>在目前視窗中開啟新的分析資料檔。</p>"
 
-#: toplevel.cpp:522
+#: toplevel.cpp:517
 msgid "<b>Reload Profile Data</b><p>This loads any new created parts, too.</p>"
 msgstr "<b>重新載入分析資料</b><p>這也會載入任何新建立的部件。</p>"
 
-#: toplevel.cpp:526
+#: toplevel.cpp:521
 msgid "&Export Graph"
 msgstr "匯出圖形(&E)"
 
-#: toplevel.cpp:530
+#: toplevel.cpp:525
 msgid ""
 "<b>Export Call Graph</b>"
 "<p>Generates a file with extension .dot for the tools of the GraphViz "
 "package.</p>"
 msgstr "<b>匯出呼叫圖</b> <p>產生副檔名為 .dot 的 GraphViz 套件工具的檔案。</p>"
 
-#: toplevel.cpp:536
+#: toplevel.cpp:531
 msgid "&Force Dump"
 msgstr "強制傾印(&F)"
 
-#: toplevel.cpp:545
+#: toplevel.cpp:540
 msgid ""
 "<b>Force Dump</b>"
 "<p>This forces a dump for a Callgrind profile run in the current directory. "
@@ -599,59 +1175,59 @@ msgstr ""
 "<p>注意：Callgrind 執行時只會在實際執行的時間（只有幾毫秒）才會偵測 callgrind.cmd "
 "檔的存在與否，休眠（Sleep）時並不會偵測。提示：若是使用者介面的程式分析檔，您可以用調整視窗大小來叫醒 Callgrind。</p>"
 
-#: toplevel.cpp:570
+#: toplevel.cpp:565
 msgid ""
 "<b>Open Profile Data</b>"
 "<p>This opens a profile data file, with possible multiple parts</p>"
 msgstr "<b>開啟分析檔資料</b><p>開啟分析檔資料。</p>"
 
-#: toplevel.cpp:586
+#: toplevel.cpp:581
 msgid "Show/Hide the Parts Overview Dockable"
 msgstr "顯示/隱藏部件概觀嵌入面板"
 
-#: toplevel.cpp:590
+#: toplevel.cpp:585
 msgid "Call Stack"
 msgstr "呼叫堆疊"
 
-#: toplevel.cpp:595
+#: toplevel.cpp:590
 msgid "Show/Hide the Call Stack Dockable"
 msgstr "顯示/隱藏呼叫堆疊嵌入面板"
 
 #. i18n: file functionselectionbase.ui line 16
-#: rc.cpp:297 toplevel.cpp:599
+#: rc.cpp:297 toplevel.cpp:594
 #, no-c-format
 msgid "Function Profile"
 msgstr "函式分析檔"
 
-#: toplevel.cpp:604
+#: toplevel.cpp:599
 msgid "Show/Hide the Function Profile Dockable"
 msgstr "顯示/隱藏函式分析檔嵌入面板"
 
-#: toplevel.cpp:614
+#: toplevel.cpp:609
 msgid "Show/Hide the Profile Dumps Dockable"
 msgstr "顯示/隱藏分析檔傾印嵌入面板"
 
-#: toplevel.cpp:619
+#: toplevel.cpp:614
 msgid "Show Relative Costs"
 msgstr "顯示相對花費"
 
-#: toplevel.cpp:626
+#: toplevel.cpp:621
 msgid "Show Absolute Costs"
 msgstr "顯示絕對花費"
 
-#: toplevel.cpp:629
+#: toplevel.cpp:624
 msgid "Show relative instead of absolute costs"
 msgstr "顯示相對花費而非絕對花費"
 
-#: toplevel.cpp:633
+#: toplevel.cpp:628
 msgid "Percentage Relative to Parent"
 msgstr "相對於父項目的百分比"
 
-#: toplevel.cpp:639
+#: toplevel.cpp:634
 msgid "Show percentage costs relative to parent"
 msgstr "顯示相對於父項目的相關花費百分比"
 
-#: toplevel.cpp:643
+#: toplevel.cpp:638
 msgid ""
 "<b>Show percentage costs relative to parent</b>"
 "<p>If this is switched off, percentage costs are always shown relative to the "
@@ -698,15 +1274,15 @@ msgstr ""
 "<td>函式累積</td></tr></table></p> "
 "<p>(*)：只有在打開函式群組時（例如 ELF 物件群組）</p>"
 
-#: toplevel.cpp:658
+#: toplevel.cpp:653
 msgid "Do Cycle Detection"
 msgstr "執行循環偵測"
 
-#: toplevel.cpp:664
+#: toplevel.cpp:659
 msgid "Skip Cycle Detection"
 msgstr "略過循環偵測"
 
-#: toplevel.cpp:667
+#: toplevel.cpp:662
 msgid ""
 "<b>Detect recursive cycles</b>"
 "<p>If this is switched off, the treemap drawing will show black areas when a "
@@ -726,78 +1302,80 @@ msgstr ""
 "<p>勾選此選項的話，會去偵測並展開所有的函式成為一虛擬函式，以便正確處理。不過，對使用者介面的應用程式來說，這會產生巨大的假循環，變得無法分析。因此，就必須關"
 "掉這個選項。</p>"
 
-#: toplevel.cpp:689 toplevel.cpp:729
+#: toplevel.cpp:684 toplevel.cpp:724
 msgid "Go back in function selection history"
 msgstr "在函式選擇歷史中往後"
 
-#: toplevel.cpp:695 toplevel.cpp:741
+#: toplevel.cpp:690 toplevel.cpp:736
 msgid "Go forward in function selection history"
 msgstr "在函式選擇歷史中往前"
 
-#: toplevel.cpp:701 toplevel.cpp:715
+#: toplevel.cpp:696 toplevel.cpp:710
 msgid ""
 "<b>Go Up</b>"
 "<p>Go to last selected caller of current function. If no caller was visited, "
 "use that with highest cost.</p>"
 msgstr "<b>往上</b><p>到此函式最後一個選取的呼叫者。如果沒有，則使用最高花費。</p>"
 
-#: toplevel.cpp:707
+#: toplevel.cpp:702
 msgid "&Up"
 msgstr "向上(&U)"
 
-#: toplevel.cpp:746 toplevel.cpp:1651
+#: toplevel.cpp:741 toplevel.cpp:1646
 msgid "Primary Event Type"
 msgstr "主要事件型態"
 
-#: toplevel.cpp:748
+#: toplevel.cpp:743
 msgid "Select primary event type of costs"
 msgstr "選擇花費的主要事件型態"
 
-#: toplevel.cpp:758 toplevel.cpp:1654
+#: toplevel.cpp:753 toplevel.cpp:1649
 msgid "Secondary Event Type"
 msgstr "次要事件型態"
 
-#: toplevel.cpp:760
+#: toplevel.cpp:755
 msgid "Select secondary event type for cost e.g. shown in annotations"
 msgstr "選擇花費的次要事件型態。"
 
-#: functionselection.cpp:243 toplevel.cpp:768
+#: functionselection.cpp:243 toplevel.cpp:763
 msgid "Grouping"
 msgstr "群組"
 
-#: toplevel.cpp:771
+#: toplevel.cpp:766
 msgid "Select how functions are grouped into higher level cost items"
 msgstr "選擇函式要怎麼併入高階花費項目"
 
-#: functionselection.cpp:52 toplevel.cpp:777
+#: functionselection.cpp:52 toplevel.cpp:772
 msgid "(No Grouping)"
 msgstr "（無群組）"
 
-#: toplevel.cpp:787
+#: toplevel.cpp:782
 msgid "Split"
 msgstr "分割"
 
-#: toplevel.cpp:791
+#: toplevel.cpp:786
 msgid "Show two information panels"
 msgstr "顯示兩個資訊面板"
 
-#: toplevel.cpp:795
-msgid "Split Horizontal"
+#: toplevel.cpp:790
+#, fuzzy
+msgid "SplitQt::Horizontal"
 msgstr "水平分割"
 
-#: toplevel.cpp:800
-msgid "Change Split Orientation when main window is split."
+#: toplevel.cpp:795
+#, fuzzy
+msgid "Change Split Qt::Orientation when main window is split."
 msgstr "主視窗分割時變更分割方向"
 
-#: toplevel.cpp:808
+#: toplevel.cpp:803
 msgid "Tip of the &Day..."
 msgstr "每日提示(&D)..."
 
-#: toplevel.cpp:809
+#: toplevel.cpp:804
 msgid "Show \"Tip of the Day\""
 msgstr "顯示「每日提示」"
 
-#: toplevel.cpp:1012 toplevel.cpp:1061
+#: toplevel.cpp:1007 toplevel.cpp:1056
 msgid ""
 "cachegrind.out* callgrind.out*|Callgrind Profile Data\n"
 "*|All Files"
@@ -805,638 +1383,153 @@ msgstr ""
 "cachegrind.out* callgrind.out*|Callgrind 分析資料檔\n"
 "*|所有檔案"
 
-#: toplevel.cpp:1014
+#: toplevel.cpp:1009
 msgid "Select Callgrind Profile Data"
 msgstr "選擇 Callgrind 分析資料"
 
-#: toplevel.cpp:1063
+#: toplevel.cpp:1058
 msgid "Add Callgrind Profile Data"
 msgstr "新增 Callgrind 分析資料"
 
-#: toplevel.cpp:1221 toplevel.cpp:1574
+#: toplevel.cpp:1216 toplevel.cpp:1569
 msgid "(Hidden)"
 msgstr "（隱藏）"
 
-#: toplevel.cpp:1626
+#: toplevel.cpp:1621
 msgid "Hide"
 msgstr "隱藏"
 
-#: toplevel.cpp:1659
+#: toplevel.cpp:1654
 msgid "Show Absolute Cost"
 msgstr "顯示絕對花費"
 
-#: toplevel.cpp:1662
+#: toplevel.cpp:1657
 msgid "Show Relative Cost"
 msgstr "顯示相對花費"
 
-#: toplevel.cpp:1693
+#: toplevel.cpp:1688
 msgid "Go Forward"
 msgstr "往前"
 
-#: toplevel.cpp:1694
+#: toplevel.cpp:1689
 msgid "Go Up"
 msgstr "往上"
 
-#: toplevel.cpp:1926
+#: toplevel.cpp:1921
 #, c-format
 msgid "Layout Count: %1"
 msgstr "佈局計數：%1"
 
-#: toplevel.cpp:1933
+#: toplevel.cpp:1928
 msgid "No profile data file loaded."
 msgstr "沒有載入分析資料檔。"
 
-#: toplevel.cpp:1942
+#: toplevel.cpp:1937
 msgid "Total %1 Cost: %2"
 msgstr "總計 %1 花費：%2"
 
-#: toplevel.cpp:1954
+#: toplevel.cpp:1949
 msgid "No event type selected"
 msgstr "（沒有選擇事件型態）"
 
-#: toplevel.cpp:2199 toplevel.cpp:2235 toplevel.cpp:2271
+#: toplevel.cpp:2194 toplevel.cpp:2230 toplevel.cpp:2266
 msgid "(No Stack)"
 msgstr "（沒有堆疊）"
 
-#: toplevel.cpp:2205
+#: toplevel.cpp:2200
 msgid "(No next function)"
 msgstr "（沒有下一個函式）"
 
-#: toplevel.cpp:2241
+#: toplevel.cpp:2236
 msgid "(No previous function)"
 msgstr "（沒有前一個函式）"
 
-#: toplevel.cpp:2276
+#: toplevel.cpp:2271
 msgid "(No Function Up)"
 msgstr "（沒有函式往上）"
 
-#. i18n: file dumpselectionbase.ui line 906
-#: instrview.cpp:125 rc.cpp:264 sourceview.cpp:50
-#, no-c-format
-msgid "#"
-msgstr "#"
-
-#: callview.cpp:45 instrview.cpp:127 sourceview.cpp:52
-msgid "Cost 2"
-msgstr "花費 2"
-
-#: instrview.cpp:129
-msgid "Hex"
-msgstr "十六進位值"
-
-#: instrview.cpp:131 tabview.cpp:313
-msgid "Assembler"
-msgstr "組譯器"
-
-#: instrview.cpp:132
-msgid "Source Position"
-msgstr "源碼位置"
-
-#: instrview.cpp:163
-msgid ""
-"<b>Annotated Assembler</b>"
-"<p>The annotated assembler list shows the machine code instructions of the "
-"current selected function together with (self) cost spent while executing an "
-"instruction. If this is a call instruction, lines with details on the call "
-"happening are inserted into the source: the cost spent inside of the call, the "
-"number of calls happening, and the call destination.</p>"
-"<p>The disassembler output shown is generated with the 'objdump' utility from "
-"the 'binutils' package.</p>"
-"<p>Select a line with call information to make the destination function of this "
-"call current.</p>"
-msgstr ""
-"<b>註記組譯器（Annotated Assembler）</b> "
-"<p>註記組譯器顯示目前選取的函式的機器碼指令，以及執行該指令時的花費。如果是呼叫指令，則呼叫時發生的詳情會插入到源碼中，包括呼叫的花費，呼叫的次數，以及呼叫的"
-"目的地。</p> "
-"<p>反組譯輸出可以用 objdump 產生，通常會包在 binutils 套件中。</p> "
-"<p>選取呼叫資訊中的某一行可以眺到被呼叫的函式。</p>"
-
-#: callgraphview.cpp:2397 callgraphview.cpp:2401 callgraphview.cpp:2419
-#: callview.cpp:123 callview.cpp:128 coverageview.cpp:166 instrview.cpp:191
-#: sourceview.cpp:116
-msgid "Go to '%1'"
-msgstr "跳到 %1"
-
-#: instrview.cpp:195
-#, c-format
-msgid "Go to Address %1"
-msgstr "跳到位址 %1"
-
-#: instrview.cpp:207
-msgid "Hex Code"
-msgstr "十六進位碼"
-
-#: instrview.cpp:426
-msgid "There is no instruction info in the profile data file."
-msgstr "此分析資料檔中沒有指令資訊。"
-
-#: instrview.cpp:428
-msgid "For the Valgrind Calltree Skin, rerun with option"
-msgstr "要用 Valgrind Calltree Skin，請重新執行並指定選項"
-
-#: instrview.cpp:429
-msgid "      --dump-instr=yes"
-msgstr "      --dump-instr=yes"
-
-#: instrview.cpp:430
-msgid "To see (conditional) jumps, additionally specify"
-msgstr "想要看條件式的跳躍，請額外指定選項"
-
-#: instrview.cpp:431
-msgid "      --trace-jump=yes"
-msgstr "      --trace-jump=yes"
-
-#: instrview.cpp:629
-msgid "There is an error trying to execute the command"
-msgstr "執行此指令時發生錯誤"
-
-#: instrview.cpp:634 instrview.cpp:900
-msgid "Check that you have installed 'objdump'."
-msgstr "請檢查您是否已安裝 objdump。"
-
-#: instrview.cpp:636 instrview.cpp:902
-msgid "This utility can be found in the 'binutils' package."
-msgstr "這個工具可以在 binutils 套件中找到。"
-
-#: instrview.cpp:739
-msgid "(No Assembler)"
-msgstr "（沒有組譯器）"
-
-#: instrview.cpp:875
-#, c-format
-msgid ""
-"_n: There is %n cost line without assembler code.\n"
-"There are %n cost lines without assembler code."
-msgstr "有 %n 個花費線沒有組譯碼。"
-
-#: instrview.cpp:877
-msgid "This happens because the code of"
-msgstr "發生的原因是因為這個的程式碼："
-
-#: instrview.cpp:880
-msgid "does not seem to match the profile data file."
-msgstr "似乎無法符合此分析資料檔。"
-
-#: instrview.cpp:883
-msgid "Are you using an old profile data file or is the above mentioned"
-msgstr "您正使用舊的分析資料檔，還是像上面提到的"
-
-#: instrview.cpp:885
-msgid "ELF object from an updated installation/another machine?"
-msgstr "這是從已更新的安裝或其他機器來的 ELF 物件嗎？"
-
-#: instrview.cpp:893
-msgid "There seems to be an error trying to execute the command"
-msgstr "試著執行此命令時發生錯誤"
-
-#: instrview.cpp:898
-msgid "Check that the ELF object used in the command exists."
-msgstr "請檢查命令中使用的 ELF 物件存在。"
-
-#: callgraphview.cpp:306
-#, c-format
-msgid "Call(s) from %1"
-msgstr "從 %1 來的呼叫"
-
-#: callgraphview.cpp:307
+#: costlistitem.cpp:60
 #, c-format
-msgid "Call(s) to %1"
-msgstr "呼叫 %1"
-
-#: callgraphview.cpp:308
-msgid "(unknown call)"
-msgstr "（未知的呼叫）"
-
-#: callgraphview.cpp:1425
 msgid ""
-"<b>Call Graph around active Function</b>"
-"<p>Depending on configuration, this view shows the call graph environment of "
-"the active function. Note: the shown cost is <b>only</b> "
-"the cost which is spent while the active function was actually running; i.e. "
-"the cost shown for main() - if it's visible - should be the same as the cost of "
-"the active function, as that's the part of inclusive cost of main() spent while "
-"the active function was running.</p>"
-"<p>For cycles, blue call arrows indicate that this is an artificial call added "
-"for correct drawing which actually never happened.</p>"
-"<p>If the graph is larger than the widget area, an overview panner is shown in "
-"one edge. There are similar visualization options to the Call Treemap; the "
-"selected function is highlighted."
-"<p>"
-msgstr ""
-"<b>活躍函式的呼叫圖環境</b> "
-"<p>根據設定，此檢視顯示活躍函式的呼叫圖環境。注意：顯示的花費只表示此函式執行中的花費，也就是說，main() 函式顯示的花費會跟此函式的花費一樣，因為那是 "
-"main() 的引入花費。</p> "
-"<p>對循環而言，藍色的呼叫箭頭表示是人工加上去修正的，實際上不會發生。</p> "
-"<p>如果此圖大於元件的大小，則會在一邊顯示略圖。類似呼叫樹狀圖的視覺選項，選取的函式會被突顯。</p>"
-
-#: callgraphview.cpp:1789
-msgid ""
-"Warning: a long lasting graph layouting is in progress.\n"
-"Reduce node/edge limits for speedup.\n"
-msgstr ""
-"警告：正在進行長而持續的佈局作業。\n"
-"要加速，請降低節點與邊線的限制。\n"
-
-#: callgraphview.cpp:1792
-msgid ""
-"Layouting stopped.\n"
-msgstr ""
-"佈局停止。\n"
+"_n: (%n item skipped)\n"
+"(%n items skipped)"
+msgstr "略過 %n 個項目"
 
-#: callgraphview.cpp:1794
-msgid ""
-"The call graph has %1 nodes and %2 edges.\n"
-msgstr ""
-"呼叫圖中含有 %1 個節點與 %2 個邊線。\n"
+#: sourceitem.cpp:125
+msgid "Jump %1 of %2 times to %3"
+msgstr "跳到 %3 %1 次，總共需要 %2 次"
 
-#: callgraphview.cpp:1827
-msgid "No item activated for which to draw the call graph."
-msgstr "沒有激發要繪製呼叫圖的項目。"
+#: sourceitem.cpp:130
+msgid "Jump %1 times to %2"
+msgstr "跳躍到 %2 %1 次"
 
-#: callgraphview.cpp:1838
-msgid "No call graph can be drawn for the active item."
-msgstr "沒有目前活躍的項目可繪製呼叫圖。"
+#: costtypeview.cpp:42
+msgid "Event Type"
+msgstr "事件類型"
 
-#: callgraphview.cpp:1867
-msgid ""
-"No call graph is available because the following\n"
-"command cannot be run:\n"
-"'%1'\n"
-msgstr ""
-"沒有可用的呼叫圖，因為以下的指令無法執行：\n"
-"%1\n"
+#: costtypeview.cpp:45
+msgid "Short"
+msgstr "短"
 
-#: callgraphview.cpp:1870 callgraphview.cpp:2200
-msgid "Please check that 'dot' is installed (package GraphViz)."
-msgstr "請檢查 dot 已安裝（在 GraphViz 套件中）"
+#: costtypeview.cpp:47
+msgid "Formula"
+msgstr "公式"
 
-#: callgraphview.cpp:2199
+#: costtypeview.cpp:81
 msgid ""
-"Error running the graph layouting tool.\n"
+"<b>Cost Types List</b>"
+"<p>This list shows all cost types available and what the self/inclusive cost of "
+"the current selected function is for that cost type.</p>"
+"<p>By choosing a cost type from the list, you change the cost type of costs "
+"shown all over KCachegrind to be the selected one.</p>"
 msgstr ""
-"執行圖形佈局工具時發生錯誤。\n"
-
-#: callgraphview.cpp:2207
-msgid ""
-"There is no call graph available for function\n"
-"\t'%1'\n"
-"because it has no cost of the selected event type."
-msgstr "沒有函式 %1 的呼叫圖，因為沒有所選取事件型態的花費。"
-
-#: callgraphview.cpp:2428
-msgid "Stop Layouting"
-msgstr "停止佈局"
-
-#: callgraphview.cpp:2436
-msgid "As PostScript"
-msgstr "為 PostScript 檔"
-
-#: callgraphview.cpp:2437
-msgid "As Image ..."
-msgstr "為影像檔..."
-
-#: callgraphview.cpp:2439
-msgid "Export Graph"
-msgstr "匯出圖形"
-
-#: callgraphview.cpp:2444 callgraphview.cpp:2467
-msgid "Unlimited"
-msgstr "無限制"
-
-#: callgraphview.cpp:2447 callgraphview.cpp:2470
-msgid "None"
-msgstr "無"
-
-#: callgraphview.cpp:2448 callgraphview.cpp:2471
-msgid "max. 2"
-msgstr "最大 2"
-
-#: callgraphview.cpp:2449 callgraphview.cpp:2472
-msgid "max. 5"
-msgstr "最大 5"
-
-#: callgraphview.cpp:2450 callgraphview.cpp:2473
-msgid "max. 10"
-msgstr "最大 10"
-
-#: callgraphview.cpp:2451 callgraphview.cpp:2474
-msgid "max. 15"
-msgstr "最大 15"
-
-#: callgraphview.cpp:2461 callgraphview.cpp:2484
-#, c-format
-msgid "< %1"
-msgstr "< %1"
-
-#: callgraphview.cpp:2490
-msgid "No Minimum"
-msgstr "無最小值"
-
-#: callgraphview.cpp:2494
-#, c-format
-msgid "50 %"
-msgstr "50 %"
-
-#: callgraphview.cpp:2495
-#, c-format
-msgid "20 %"
-msgstr "20 %"
-
-#: callgraphview.cpp:2496
-#, c-format
-msgid "10 %"
-msgstr "10 %"
-
-#: callgraphview.cpp:2497
-#, c-format
-msgid "5 %"
-msgstr "5 %"
+"<b>花費類型清單</b>"
+"<p>這份清單顯示所有可用的花費類型（cost type）以及目前所選取的函式在該類型的自身與引入的花費。</p> "
+"<p>選取其中一種類型，您可以改變所有 KCachegrind 的花費成為該類型。</p>"
 
-#: callgraphview.cpp:2498
-#, c-format
-msgid "3 %"
-msgstr "3 %"
+#: costtypeview.cpp:98
+msgid "Set Secondary Event Type"
+msgstr "設定次要事件類型"
 
-#: callgraphview.cpp:2499
-#, c-format
-msgid "2 %"
-msgstr "2 %"
+#: costtypeview.cpp:100
+msgid "Remove Secondary Event Type"
+msgstr "移除次要事件類型"
 
-#: callgraphview.cpp:2500
-#, c-format
-msgid "1.5 %"
-msgstr "1.5 %"
+#: costtypeview.cpp:105
+msgid "Edit Long Name"
+msgstr "編輯長名稱"
 
-#: callgraphview.cpp:2501
-#, c-format
-msgid "1 %"
-msgstr "1 %"
+#: costtypeview.cpp:106
+msgid "Edit Short Name"
+msgstr "編輯短名稱"
 
-#: callgraphview.cpp:2517
-msgid "Same as Node"
-msgstr "與節點相同"
+#: costtypeview.cpp:107
+msgid "Edit Formula"
+msgstr "編輯公式"
 
-#: callgraphview.cpp:2518
-#, c-format
-msgid "50 % of Node"
-msgstr "50% 的節點"
+#: costtypeview.cpp:115
+msgid "New Cost Type ..."
+msgstr "新增花費類型..."
 
-#: callgraphview.cpp:2519
+#: costtypeview.cpp:149 costtypeview.cpp:154
 #, c-format
-msgid "20 % of Node"
-msgstr "20% 的節點"
+msgid "New%1"
+msgstr "新增%1"
 
-#: callgraphview.cpp:2520
+#: costtypeview.cpp:155
 #, c-format
-msgid "10 % of Node"
-msgstr "10% 的節點"
-
-#: callgraphview.cpp:2530
-msgid "Caller Depth"
-msgstr "呼叫者深度"
-
-#: callgraphview.cpp:2531
-msgid "Callee Depth"
-msgstr "被呼叫者深度"
-
-#: callgraphview.cpp:2532
-msgid "Min. Node Cost"
-msgstr "最小節點花費"
-
-#: callgraphview.cpp:2533
-msgid "Min. Call Cost"
-msgstr "最小呼叫花費"
-
-#: callgraphview.cpp:2535
-msgid "Arrows for Skipped Calls"
-msgstr "被略過呼叫的箭頭"
-
-#: callgraphview.cpp:2537
-msgid "Inner-cycle Calls"
-msgstr "內部循環呼叫"
-
-#: callgraphview.cpp:2539
-msgid "Cluster Groups"
-msgstr "叢集群組"
-
-#: callgraphview.cpp:2544
-msgid "Compact"
-msgstr "簡潔"
-
-#: callgraphview.cpp:2545
-msgid "Normal"
-msgstr "正常"
-
-#: callgraphview.cpp:2546
-msgid "Tall"
-msgstr "高"
-
-#: callgraphview.cpp:2551
-msgid "Top to Down"
-msgstr "上到下"
-
-#: callgraphview.cpp:2552
-msgid "Left to Right"
-msgstr "左到右"
-
-#: callgraphview.cpp:2553
-msgid "Circular"
-msgstr "圓形"
-
-#: callgraphview.cpp:2559
-msgid "TopLeft"
-msgstr "左上方"
-
-#: callgraphview.cpp:2560
-msgid "TopRight"
-msgstr "右上方"
-
-#: callgraphview.cpp:2561
-msgid "BottomLeft"
-msgstr "左下方"
+msgid "New Cost Type %1"
+msgstr "新增花費類型 %1"
 
-#: callgraphview.cpp:2562
-msgid "BottomRight"
-msgstr "右下方"
+#: costtypeitem.cpp:56
+msgid "Unknown Type"
+msgstr "未知類型"
 
-#. i18n: file configdlgbase.ui line 246
-#: callgraphview.cpp:2563 rc.cpp:42 rc.cpp:51 rc.cpp:54
+#. i18n: file dumpselectionbase.ui line 906
+#: instrview.cpp:125 rc.cpp:264 sourceview.cpp:50
 #, no-c-format
-msgid "Automatic"
-msgstr "自動"
-
-#: callgraphview.cpp:2570
-msgid "Graph"
-msgstr "圖"
-
-#: callgraphview.cpp:2572
-msgid "Birds-eye View"
-msgstr "鳥瞰檢視"
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Frank Weng (a.k.a. Franklin),Franklin Weng"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "franklin at goodhorse dot idv dot tw"
-
-#: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72
-#, c-format
-msgid ""
-"_n: (%n function skipped)\n"
-"(%n functions skipped)"
-msgstr "（已略過 %n 個函式）"
-
-#: main.cpp:38
-msgid "Run <exec> under cachegrind"
-msgstr "在 cachegrind 下執行<exec>"
-
-#: main.cpp:39
-msgid "Show information of this trace"
-msgstr "顯示此追蹤的資訊"
-
-#: main.cpp:46
-msgid "KCachegrind"
-msgstr "KCachegrind"
-
-#: main.cpp:48
-msgid "TDE Frontend for Cachegrind"
-msgstr "Cachegrind 的 TDE 前端程式"
-
-#: main.cpp:50
-msgid "(C) 2002, 2003, 2004"
-msgstr "(c) 2002, 2003, 2004"
-
-#: main.cpp:53
-msgid "Author/Maintainer"
-msgstr "作者/維護者"
-
-#: tabview.cpp:64
-msgid "Move to Top"
-msgstr "移動到頂端"
-
-#: tabview.cpp:68
-msgid "Move to Right"
-msgstr "移動到右方"
-
-#: tabview.cpp:72
-msgid "Move to Bottom"
-msgstr "移動到底端"
-
-#: tabview.cpp:76
-msgid "Move to Bottom Left"
-msgstr "移動到左下方"
-
-#: tabview.cpp:77 tabview.cpp:94 treemap.cpp:2908
-msgid "Bottom Left"
-msgstr "左下方"
-
-#: tabview.cpp:79
-msgid "Move Area To"
-msgstr "移動區域到"
-
-#: tabview.cpp:81
-msgid "Hide This Tab"
-msgstr "隱藏此分頁"
-
-#: tabview.cpp:82
-msgid "Hide Area"
-msgstr "隱藏範圍"
-
-#: tabview.cpp:95
-msgid "Show Hidden On"
-msgstr "顯示隱藏於"
-
-#: tabview.cpp:242
-msgid "(No profile data file loaded)"
-msgstr "（沒有載入分析資料檔）"
-
-#: tabview.cpp:281
-msgid "Types"
-msgstr "類型"
-
-#: tabview.cpp:284
-msgid "Callers"
-msgstr "呼叫者"
-
-#: tabview.cpp:287
-msgid "All Callers"
-msgstr "所有呼叫者"
-
-#: tabview.cpp:290
-msgid "Caller Map"
-msgstr "呼叫者地圖"
-
-#: tabview.cpp:293
-msgid "Source"
-msgstr "來源"
-
-#: tabview.cpp:297
-msgid "Parts"
-msgstr "部件"
-
-#: tabview.cpp:300
-msgid "Call Graph"
-msgstr "呼叫圖"
-
-#: tabview.cpp:303
-msgid "Callees"
-msgstr "被呼叫者"
-
-#: tabview.cpp:306
-msgid "All Callees"
-msgstr "所有被呼叫者"
-
-#: tabview.cpp:310
-msgid "Callee Map"
-msgstr "被呼叫者地圖"
-
-#: tabview.cpp:553
-msgid ""
-"<b>Information Tabs</b>"
-"<p>This widget shows information for the current selected function in different "
-"tabs: "
-"<ul>"
-"<li>The Costs tab shows a list of available event types and the inclusive and "
-"self costs regarding to these types.</li>"
-"<li>The Parts tab shows a list of trace parts if the trace consists of more "
-"than one part (otherwise, this tab is hided). The cost of the selected function "
-"spent in the different parts together with the calls happening is shown.</li>"
-"<li>The Call Lists tab shows direct callers and callees of the function in more "
-"detail.</li>"
-"<li>The Coverage tab shows the same is the Call Lists tab, but not only direct "
-"callers and callees but also indirect ones.</li>"
-"<li>The Call Graph tab shows a graphical visualization of the calls done by "
-"this function.</li>"
-"<li>The Source tab presents annotated source code if debugging information and "
-"the source file is available.</li>"
-"<li>The Assembler tab presents annotated assembler code if trace information on "
-"instruction level is available.</li></ul>For more information, see the <em>"
-"What's This?</em> help of the corresponding tab widget</p>"
-msgstr ""
-"<b>資訊分頁</b>"
-"<p>本畫面以不同分頁顯示目前所選擇函數的資訊： "
-"<ul>"
-"<li>「花費」分頁顯示可用的事件型態清單，以及它們的引入與自身花費。</li>"
-"<li>「部件」分頁在有一個以上的追蹤時顯示追蹤部件清單。（若只有一個則會隱藏此分頁。）也會顯示選取的函式在不同的部件，以及呼叫的花費。</li>"
-"<li>「呼叫清單」分頁顯示此函式內直接呼叫的函式，與直接呼叫此函式的函式詳情。</li>"
-"<li>「總體呼叫」分頁顯示的跟「呼叫清單」差不多，不過還包括間接呼叫。</li>"
-"<li>「呼叫圖」分頁顯示此函式與呼叫者之間的圖形關係。</li>"
-"<li>「源碼」分頁在除錯資訊與程式源碼檔可用時顯示源碼。</li>"
-"<li>「組合」分頁顯示追蹤資訊的機械碼。</li></ul>更多詳情可以參考「這是什麼？」的說明元件。</p>"
-
-#: tabview.cpp:630
-msgid "(No Data loaded)"
-msgstr "（沒有載入資料）"
-
-#: tabview.cpp:631
-msgid "(No function selected)"
-msgstr "（沒有選取函式）"
+msgid "#"
+msgstr "#"
 
 #: sourceview.cpp:54 sourceview.cpp:554
 msgid "Source (unknown)"
@@ -1519,18 +1612,6 @@ msgstr "新增此檔案所在的資料夾到程式源碼資料夾清單中。"
 msgid "The list can be found in the configuration dialog."
 msgstr "這個清單可以在設定對話框中找到。"
 
-#: partlistitem.cpp:49
-msgid " (Thread %1)"
-msgstr "（執行緒 %1）"
-
-#: partlistitem.cpp:56
-msgid "(none)"
-msgstr "（無）"
-
-#: callitem.cpp:82 partlistitem.cpp:152
-msgid "(active)"
-msgstr "（活躍）"
-
 #: functionselection.cpp:176
 #, c-format
 msgid "Go to %1"
@@ -1544,146 +1625,6 @@ msgstr "顯示全部項目"
 msgid "No Grouping"
 msgstr "未群組"
 
-#: coverageview.cpp:48 coverageview.cpp:54
-msgid "Distance"
-msgstr "距離"
-
-#. i18n: file dumpselectionbase.ui line 928
-#: coverageview.cpp:49 partview.cpp:49 rc.cpp:270 rc.cpp:315
-#, no-c-format
-msgid "Called"
-msgstr "已呼叫"
-
-#: callview.cpp:48 coverageview.cpp:50
-msgid "Caller"
-msgstr "呼叫者"
-
-#: coverageview.cpp:55
-msgid "Calling"
-msgstr "呼叫中"
-
-#: callview.cpp:52 coverageview.cpp:56
-msgid "Callee"
-msgstr "被呼叫者"
-
-#: coverageview.cpp:90
-msgid ""
-"<b>List of all Callers</b>"
-"<p>This list shows all functions calling the current selected one, either "
-"directly or with several functions in-between on the stack; the number of "
-"functions in-between plus one is called the <em>Distance</em> "
-"(e.g. for function A,B,C there exists a call from A to C when A calls B and B "
-"calls C, i.e. A => B => C. The distance here is 2).</p>"
-"<p>Absolute cost shown is the cost spent in the selected function while a "
-"listed function is active; relative cost is the percentage of all cost spent in "
-"the selected function while the listed one is active. The cost graphic shows "
-"logarithmic percentage with a different color for each distance.</p>"
-"<p>As there can be many calls from the same function, the distance column "
-"sometimes shows the range of distances for all calls happening; then, in "
-"parentheses, there is the medium distance, i.e. the distance where most of the "
-"call costs happened.</p>"
-"<p>Selecting a function makes it the current selected one of this information "
-"panel. If there are two panels (Split mode), the function of the other panel is "
-"changed instead.</p>"
-msgstr ""
-"<b>所有呼叫者清單</b> "
-"<p>此清單顯示目前選取函式的所有呼叫者函式，包括直接呼叫與間接呼叫。間接呼叫的數字加一稱為「距離」（例如，函式 A 呼叫函式 B，函式 B 又呼叫函式 "
-"C，則函式 A 到 C 的距離為 2）</p> "
-"<p>顯示的「絕對花費」是當一個已列出的所選函式使用時的花費；「相對花費」是此函式相對於所有已選函式的花費。花費圖形以對每個距離以不同顏色顯示對數百分比。</p"
-"> "
-"<p>因為有可能同一個函式中會有許多呼叫，距離欄位有時會顯示所有發生呼叫的函式的距離範圍，這種狀況下，括弧中顯示的是平均距離，也就是發生呼叫最多花費的地方。</"
-"p> "
-"<p>選擇某函式可以看每個函式的資訊。如果在分割模式下的兩個面板，會在另一個面板改變。</p>"
-
-#: coverageview.cpp:120
-msgid ""
-"<b>List of all Callees</b>"
-"<p>This list shows all functions called by the current selected one, either "
-"directly or with several function in-between on the stack; the number of "
-"function in-between plus one is called the <em>Distance</em> "
-"(e.g. for function A,B,C there exists a call from A to C when A calls B and B "
-"calls C, i.e. A => B => C. The distance here is 2).</p>"
-"<p>Absolute cost shown is the cost spent in the listed function while the "
-"selected is active; relative cost is the percentage of all cost spent in the "
-"listed function while the selected one is active. The cost graphic always shows "
-"logarithmic percentage with a different color for each distance.</p>"
-"<p>As there can be many calls to the same function, the distance column "
-"sometimes shows the range of distances for all calls happening; then, in "
-"parentheses, there is the medium distance, i.e. the distance where most of the "
-"call costs happened.</p>"
-"<p>Selecting a function makes it the current selected one of this information "
-"panel. If there are two panels (Split mode), the function of the other panel is "
-"changed instead.</p>"
-msgstr ""
-"<b>被呼叫者清單</b>"
-"<p>這份清單顯示所有被目前選取的函式呼叫的函式，包括直接與間接呼叫。間接呼叫的數字加一稱為「距離」（例如，函式 A 呼叫函式 B，函式 B 又呼叫函式 "
-"C，則函式 A 到 C 的距離為 2）</p> "
-"<p>顯示的「絕對花費」是當一個已列出的所選函式使用時的花費；「相對花費」是此函式相對於所有已選函式的花費。花費圖形以對每個距離以不同顏色顯示對數百分比。</p"
-"> "
-"<p>因為有可能同一個函式中會有許多呼叫，距離欄位有時會顯示所有發生呼叫的函式的距離範圍，這種狀況下，括弧中顯示的是平均距離，也就是發生呼叫最多花費的地方。</"
-"p> "
-"<p>選擇某函式可以看每個函式的資訊。如果在分割模式下的兩個面板，會在另一個面板改變。</p>"
-
-#: configuration.cpp:63
-msgid "Instruction Fetch"
-msgstr "指令抓取"
-
-#: configuration.cpp:64
-msgid "Data Read Access"
-msgstr "資料讀取存取"
-
-#: configuration.cpp:65
-msgid "Data Write Access"
-msgstr "資料寫入存取"
-
-#: configuration.cpp:66
-msgid "L1 Instr. Fetch Miss"
-msgstr "L1 指令抓取失誤"
-
-#: configuration.cpp:67
-msgid "L1 Data Read Miss"
-msgstr "L1 資料讀取失誤"
-
-#: configuration.cpp:68
-msgid "L1 Data Write Miss"
-msgstr "L1 資料寫入失誤"
-
-#: configuration.cpp:69
-msgid "L2 Instr. Fetch Miss"
-msgstr "L2 指令抓取失誤"
-
-#: configuration.cpp:70
-msgid "L2 Data Read Miss"
-msgstr "L2 資料讀取失誤"
-
-#: configuration.cpp:71
-msgid "L2 Data Write Miss"
-msgstr "L2 資料寫入失誤"
-
-#: configuration.cpp:72
-msgid "Samples"
-msgstr "樣本"
-
-#: configuration.cpp:73
-msgid "System Time"
-msgstr "系統時間"
-
-#: configuration.cpp:74
-msgid "User Time"
-msgstr "使用者時間"
-
-#: configuration.cpp:75
-msgid "L1 Miss Sum"
-msgstr "L1 失誤總和"
-
-#: configuration.cpp:76
-msgid "L2 Miss Sum"
-msgstr "L2 失誤總和"
-
-#: configuration.cpp:77
-msgid "Cycle Estimation"
-msgstr "循環估計"
-
 #. i18n: file tdecachegrindui.rc line 15
 #: rc.cpp:9
 #, no-c-format
@@ -1738,6 +1679,12 @@ msgstr "清單中最大項目數："
 msgid "Cost Item Colors"
 msgstr "花費項目顏色"
 
+#. i18n: file configdlgbase.ui line 246
+#: callgraphview.cpp:2562 rc.cpp:42 rc.cpp:51 rc.cpp:54
+#, no-c-format
+msgid "Automatic"
+msgstr "自動"
+
 #. i18n: file configdlgbase.ui line 254
 #: rc.cpp:45
 #, no-c-format
@@ -2050,12 +1997,6 @@ msgstr "已執行"
 msgid "Basic Blocks"
 msgstr "基本區塊"
 
-#. i18n: file dumpselectionbase.ui line 754
-#: callmapview.cpp:63 rc.cpp:234 rc.cpp:339
-#, no-c-format
-msgid "Calls"
-msgstr "呼叫"
-
 #. i18n: file dumpselectionbase.ui line 796
 #: rc.cpp:243
 #, no-c-format
@@ -2068,12 +2009,6 @@ msgstr "Ir"
 msgid "Distinct"
 msgstr "不同"
 
-#. i18n: file dumpselectionbase.ui line 824
-#: configdlg.cpp:58 rc.cpp:249
-#, no-c-format
-msgid "ELF Objects"
-msgstr "ELF 物件"
-
 #. i18n: file dumpselectionbase.ui line 838
 #: rc.cpp:252
 #, no-c-format
@@ -2098,12 +2033,6 @@ msgstr "堆疊追蹤:"
 msgid "Sync."
 msgstr "同步"
 
-#. i18n: file dumpselectionbase.ui line 950
-#: callmapview.cpp:61 rc.cpp:276 rc.cpp:321
-#, no-c-format
-msgid "Location"
-msgstr "位置"
-
 #. i18n: file dumpselectionbase.ui line 976
 #: rc.cpp:279
 #, no-c-format
@@ -2164,6 +2093,429 @@ msgstr "堆疊選擇"
 msgid "Cost2"
 msgstr "花費2"
 
+#: partgraph.cpp:167
+#, c-format
+msgid "Profile Part %1"
+msgstr "分析檔部件 %1"
+
+#: partgraph.cpp:226
+msgid "(no trace)"
+msgstr "（無追蹤）"
+
+#: partgraph.cpp:229
+msgid "(no part)"
+msgstr "（無部件）"
+
+#: configuration.cpp:67
+msgid "Instruction Fetch"
+msgstr "指令抓取"
+
+#: configuration.cpp:68
+msgid "Data Read Access"
+msgstr "資料讀取存取"
+
+#: configuration.cpp:69
+msgid "Data Write Access"
+msgstr "資料寫入存取"
+
+#: configuration.cpp:70
+msgid "L1 Instr. Fetch Miss"
+msgstr "L1 指令抓取失誤"
+
+#: configuration.cpp:71
+msgid "L1 Data Read Miss"
+msgstr "L1 資料讀取失誤"
+
+#: configuration.cpp:72
+msgid "L1 Data Write Miss"
+msgstr "L1 資料寫入失誤"
+
+#: configuration.cpp:73
+msgid "L2 Instr. Fetch Miss"
+msgstr "L2 指令抓取失誤"
+
+#: configuration.cpp:74
+msgid "L2 Data Read Miss"
+msgstr "L2 資料讀取失誤"
+
+#: configuration.cpp:75
+msgid "L2 Data Write Miss"
+msgstr "L2 資料寫入失誤"
+
+#: configuration.cpp:76
+#, fuzzy
+msgid "LL Instr. Fetch Miss"
+msgstr "L1 指令抓取失誤"
+
+#: configuration.cpp:77
+#, fuzzy
+msgid "LL Data Read Miss"
+msgstr "L1 資料讀取失誤"
+
+#: configuration.cpp:78
+#, fuzzy
+msgid "LL Data Write Miss"
+msgstr "L1 資料寫入失誤"
+
+#: configuration.cpp:79
+msgid "Samples"
+msgstr "樣本"
+
+#: configuration.cpp:80
+msgid "System Time"
+msgstr "系統時間"
+
+#: configuration.cpp:81
+msgid "User Time"
+msgstr "使用者時間"
+
+#: configuration.cpp:82
+msgid "L1 Miss Sum"
+msgstr "L1 失誤總和"
+
+#: configuration.cpp:83
+msgid "L2 Miss Sum"
+msgstr "L2 失誤總和"
+
+#: configuration.cpp:84
+#, fuzzy
+msgid "LL Miss Sum"
+msgstr "L1 失誤總和"
+
+#: configuration.cpp:85
+msgid "Cycle Estimation"
+msgstr "循環估計"
+
+#: partview.cpp:51
+msgid "Comment"
+msgstr "註解"
+
+#: partview.cpp:73
+msgid ""
+"<b>Trace Part List</b>"
+"<p>This list shows all trace parts of the loaded trace. For each part, the "
+"self/inclusive cost of the current selected function, spent in the part, is "
+"shown; percentage costs are always relative to the total cost <em>"
+"of the part</em> (not to the whole trace as in the Trace Part Overview). Also "
+"shown are the calls happening to/from the current function inside of the trace "
+"part.</p>"
+"<p>By choosing one or more trace parts from the list, the costs shown all over "
+"KCachegrind will only be the ones spent in the selected part(s). If no list "
+"selection is shown, in fact all trace parts are selected implicitly.</p>"
+"<p>This is a multi-selection list. You can select ranges by dragging the mouse "
+"or use SHIFT/CTRL modifiers. Selection/Deselection of trace parts can also be "
+"done by using the Trace Part Overview Dockable. This one also supports multiple "
+"selection.</p>"
+"<p>Note that the list is hidden if only one trace part is loaded.</p>"
+msgstr ""
+"<b>追蹤部件清單</b> "
+"<p>這份清單顯示載入的追蹤的所有追蹤部件。每個部件中包含目前選取的函式在該部件中的自身與引入的花費，百分比是相對於該部件的總花費（不是追蹤部件概觀中的總花費）"
+"。另外也會呼叫目前函式的呼叫者與被呼叫者。</p> "
+"<p>若從清單中選擇追蹤部件，就只會顯示選取的部件的花費。如果沒有選擇任何部件，則預設是選取所有的部件。</p> "
+"<p>這是可以多重選擇的清單，您可以拖曳滑鼠來選取一個範圍，或是用 Shift 或 Ctrl 鍵來在「追蹤部件概觀」元件中選擇部件。</p> "
+"<p>注意若是只載入一個追蹤部件，則此元件是隱藏的。</p>"
+
+#: partview.cpp:106
+msgid "Select '%1'"
+msgstr "選擇 %1"
+
+#: partview.cpp:107
+msgid "Hide '%1'"
+msgstr "隱藏 %1"
+
+#: partview.cpp:111
+msgid "Hide Selected"
+msgstr "隱藏已選取項目"
+
+#: partview.cpp:112
+msgid "Show All"
+msgstr "全部顯示"
+
+#: traceitemview.cpp:53
+msgid "No description available"
+msgstr "沒有可用的描述"
+
+#: coverageitem.cpp:65 coverageitem.cpp:205 functionitem.cpp:72
+#, c-format
+msgid ""
+"_n: (%n function skipped)\n"
+"(%n functions skipped)"
+msgstr "（已略過 %n 個函式）"
+
+#: callgraphview.cpp:306
+#, c-format
+msgid "Call(s) from %1"
+msgstr "從 %1 來的呼叫"
+
+#: callgraphview.cpp:307
+#, c-format
+msgid "Call(s) to %1"
+msgstr "呼叫 %1"
+
+#: callgraphview.cpp:308
+msgid "(unknown call)"
+msgstr "（未知的呼叫）"
+
+#: callgraphview.cpp:1425
+msgid ""
+"<b>Call Graph around active Function</b>"
+"<p>Depending on configuration, this view shows the call graph environment of "
+"the active function. Note: the shown cost is <b>only</b> "
+"the cost which is spent while the active function was actually running; i.e. "
+"the cost shown for main() - if it's visible - should be the same as the cost of "
+"the active function, as that's the part of inclusive cost of main() spent while "
+"the active function was running.</p>"
+"<p>For cycles, blue call arrows indicate that this is an artificial call added "
+"for correct drawing which actually never happened.</p>"
+"<p>If the graph is larger than the widget area, an overview panner is shown in "
+"one edge. There are similar visualization options to the Call Treemap; the "
+"selected function is highlighted."
+"<p>"
+msgstr ""
+"<b>活躍函式的呼叫圖環境</b> "
+"<p>根據設定，此檢視顯示活躍函式的呼叫圖環境。注意：顯示的花費只表示此函式執行中的花費，也就是說，main() 函式顯示的花費會跟此函式的花費一樣，因為那是 "
+"main() 的引入花費。</p> "
+"<p>對循環而言，藍色的呼叫箭頭表示是人工加上去修正的，實際上不會發生。</p> "
+"<p>如果此圖大於元件的大小，則會在一邊顯示略圖。類似呼叫樹狀圖的視覺選項，選取的函式會被突顯。</p>"
+
+#: callgraphview.cpp:1789
+msgid ""
+"Warning: a long lasting graph layouting is in progress.\n"
+"Reduce node/edge limits for speedup.\n"
+msgstr ""
+"警告：正在進行長而持續的佈局作業。\n"
+"要加速，請降低節點與邊線的限制。\n"
+
+#: callgraphview.cpp:1792
+msgid ""
+"Layouting stopped.\n"
+msgstr ""
+"佈局停止。\n"
+
+#: callgraphview.cpp:1794
+msgid ""
+"The call graph has %1 nodes and %2 edges.\n"
+msgstr ""
+"呼叫圖中含有 %1 個節點與 %2 個邊線。\n"
+
+#: callgraphview.cpp:1827
+msgid "No item activated for which to draw the call graph."
+msgstr "沒有激發要繪製呼叫圖的項目。"
+
+#: callgraphview.cpp:1838
+msgid "No call graph can be drawn for the active item."
+msgstr "沒有目前活躍的項目可繪製呼叫圖。"
+
+#: callgraphview.cpp:1867
+msgid ""
+"No call graph is available because the following\n"
+"command cannot be run:\n"
+"'%1'\n"
+msgstr ""
+"沒有可用的呼叫圖，因為以下的指令無法執行：\n"
+"%1\n"
+
+#: callgraphview.cpp:1870 callgraphview.cpp:2199
+msgid "Please check that 'dot' is installed (package GraphViz)."
+msgstr "請檢查 dot 已安裝（在 GraphViz 套件中）"
+
+#: callgraphview.cpp:2198
+msgid ""
+"Error running the graph layouting tool.\n"
+msgstr ""
+"執行圖形佈局工具時發生錯誤。\n"
+
+#: callgraphview.cpp:2206
+msgid ""
+"There is no call graph available for function\n"
+"\t'%1'\n"
+"because it has no cost of the selected event type."
+msgstr "沒有函式 %1 的呼叫圖，因為沒有所選取事件型態的花費。"
+
+#: callgraphview.cpp:2427
+msgid "Stop Layouting"
+msgstr "停止佈局"
+
+#: callgraphview.cpp:2435
+msgid "As PostScript"
+msgstr "為 PostScript 檔"
+
+#: callgraphview.cpp:2436
+msgid "As Image ..."
+msgstr "為影像檔..."
+
+#: callgraphview.cpp:2438
+msgid "Export Graph"
+msgstr "匯出圖形"
+
+#: callgraphview.cpp:2443 callgraphview.cpp:2466
+msgid "Unlimited"
+msgstr "無限制"
+
+#: callgraphview.cpp:2446 callgraphview.cpp:2469
+msgid "None"
+msgstr "無"
+
+#: callgraphview.cpp:2447 callgraphview.cpp:2470
+msgid "max. 2"
+msgstr "最大 2"
+
+#: callgraphview.cpp:2448 callgraphview.cpp:2471
+msgid "max. 5"
+msgstr "最大 5"
+
+#: callgraphview.cpp:2449 callgraphview.cpp:2472
+msgid "max. 10"
+msgstr "最大 10"
+
+#: callgraphview.cpp:2450 callgraphview.cpp:2473
+msgid "max. 15"
+msgstr "最大 15"
+
+#: callgraphview.cpp:2460 callgraphview.cpp:2483
+#, c-format
+msgid "< %1"
+msgstr "< %1"
+
+#: callgraphview.cpp:2489
+msgid "No Minimum"
+msgstr "無最小值"
+
+#: callgraphview.cpp:2493
+#, c-format
+msgid "50 %"
+msgstr "50 %"
+
+#: callgraphview.cpp:2494
+#, c-format
+msgid "20 %"
+msgstr "20 %"
+
+#: callgraphview.cpp:2495
+#, c-format
+msgid "10 %"
+msgstr "10 %"
+
+#: callgraphview.cpp:2496
+#, c-format
+msgid "5 %"
+msgstr "5 %"
+
+#: callgraphview.cpp:2497
+#, c-format
+msgid "3 %"
+msgstr "3 %"
+
+#: callgraphview.cpp:2498
+#, c-format
+msgid "2 %"
+msgstr "2 %"
+
+#: callgraphview.cpp:2499
+#, c-format
+msgid "1.5 %"
+msgstr "1.5 %"
+
+#: callgraphview.cpp:2500
+#, c-format
+msgid "1 %"
+msgstr "1 %"
+
+#: callgraphview.cpp:2516
+msgid "Same as Node"
+msgstr "與節點相同"
+
+#: callgraphview.cpp:2517
+#, c-format
+msgid "50 % of Node"
+msgstr "50% 的節點"
+
+#: callgraphview.cpp:2518
+#, c-format
+msgid "20 % of Node"
+msgstr "20% 的節點"
+
+#: callgraphview.cpp:2519
+#, c-format
+msgid "10 % of Node"
+msgstr "10% 的節點"
+
+#: callgraphview.cpp:2529
+msgid "Caller Depth"
+msgstr "呼叫者深度"
+
+#: callgraphview.cpp:2530
+msgid "Callee Depth"
+msgstr "被呼叫者深度"
+
+#: callgraphview.cpp:2531
+msgid "Min. Node Cost"
+msgstr "最小節點花費"
+
+#: callgraphview.cpp:2532
+msgid "Min. Call Cost"
+msgstr "最小呼叫花費"
+
+#: callgraphview.cpp:2534
+msgid "Arrows for Skipped Calls"
+msgstr "被略過呼叫的箭頭"
+
+#: callgraphview.cpp:2536
+msgid "Inner-cycle Calls"
+msgstr "內部循環呼叫"
+
+#: callgraphview.cpp:2538
+msgid "Cluster Groups"
+msgstr "叢集群組"
+
+#: callgraphview.cpp:2543
+msgid "Compact"
+msgstr "簡潔"
+
+#: callgraphview.cpp:2544
+msgid "Normal"
+msgstr "正常"
+
+#: callgraphview.cpp:2545
+msgid "Tall"
+msgstr "高"
+
+#: callgraphview.cpp:2550
+msgid "Top to Down"
+msgstr "上到下"
+
+#: callgraphview.cpp:2551
+msgid "Left to Right"
+msgstr "左到右"
+
+#: callgraphview.cpp:2552
+msgid "Circular"
+msgstr "圓形"
+
+#: callgraphview.cpp:2558
+msgid "TopLeft"
+msgstr "左上方"
+
+#: callgraphview.cpp:2559
+msgid "TopRight"
+msgstr "右上方"
+
+#: callgraphview.cpp:2560
+msgid "BottomLeft"
+msgstr "左下方"
+
+#: callgraphview.cpp:2561
+msgid "BottomRight"
+msgstr "右下方"
+
+#: callgraphview.cpp:2569
+msgid "Graph"
+msgstr "圖"
+
+#: callgraphview.cpp:2571
+msgid "Birds-eye View"
+msgstr "鳥瞰檢視"
+
 #: treemap.cpp:1281
 #, c-format
 msgid "Text %1"
@@ -2210,10 +2562,6 @@ msgstr "只有正確的框線"
 msgid "Width %1"
 msgstr "寬度 %1"
 
-#: callmapview.cpp:321 treemap.cpp:2889
-msgid "Shading"
-msgstr "遮蔽"
-
 #: treemap.cpp:2902
 msgid "Visible"
 msgstr "可見的"
@@ -2246,14 +2594,6 @@ msgstr "右下方"
 msgid "No %1 Limit"
 msgstr "沒有 %1 限制"
 
-#: callmapview.cpp:243 treemap.cpp:3039
-msgid "No Area Limit"
-msgstr "沒有區域限制"
-
-#: callmapview.cpp:258 treemap.cpp:3045
-msgid "Area of '%1' (%2)"
-msgstr "%1 的區域 (%2)"
-
 #: treemap.cpp:3056 treemap.cpp:3067
 #, c-format
 msgid ""
@@ -2261,22 +2601,10 @@ msgid ""
 "%n Pixels"
 msgstr "%n 像素"
 
-#: callmapview.cpp:264 treemap.cpp:3071
-msgid "Double Area Limit (to %1)"
-msgstr "將區域限制加倍（到 %1）"
-
 #: treemap.cpp:3073
 msgid "Halve Area Limit (to %1)"
 msgstr "將區域限制減半（到 %1）"
 
-#: callmapview.cpp:187 treemap.cpp:3101
-msgid "No Depth Limit"
-msgstr "沒有深度限制"
-
-#: callmapview.cpp:198 treemap.cpp:3107
-msgid "Depth of '%1' (%2)"
-msgstr "%1 的深度（%2）"
-
 #: treemap.cpp:3118
 #, c-format
 msgid "Depth %1"
@@ -2290,446 +2618,141 @@ msgstr "遞減（到 %1）"
 msgid "Increment (to %1)"
 msgstr "遞增（到 %1）"
 
-#: callmapview.cpp:98
-msgid ""
-"<b>Caller Map</b>"
-"<p>This graph shows the nested hierarchy of all callers of the current "
-"activated function. Each colored rectangle represents a function; its size "
-"tries to be proportional to the cost spent therein while the active function is "
-"running (however, there are drawing constrains).</p>"
-msgstr ""
-"<b>呼叫者地圖</b> "
-"<p>這個圖形顯示目前活躍的函式所有呼叫者的巢狀架構。每個彩色的矩形表示一個函式，大小會與該函式執行時的花費成比例。（不過畫圖形時會有所限制，所以是盡量成比例）"
-"。</p>"
-
-#: callmapview.cpp:105
-msgid ""
-"<b>Call Map</b>"
-"<p>This graph shows the nested hierarchy of all callees of the current "
-"activated function. Each colored rectangle represents a function; its size "
-"tries to be proportional to the cost spent therein while the active function is "
-"running (however, there are drawing constrains).</p>"
-msgstr ""
-"<b>呼叫地圖</b> "
-"<p>這個圖形顯示目前活躍的函式所有呼叫的巢狀架構。每個彩色的矩形表示一個函式，大小會與該函式執行時的花費成比例。（不過畫圖形時會有所限制，所以是盡量成比例）。"
-"</p>"
-
-#: callmapview.cpp:113
-msgid ""
-"<p>Appearance options can be found in the in the context menu. To get exact "
-"size proportions, choose 'Hide incorrect borders'. As this mode can be <em>"
-"very</em> time consuming, you may want to limit the maximum drawn nesting level "
-"before. 'Best' determinates the split direction for children from the aspect "
-"ratio of the parent. 'Always Best' decides on remaining space for each sibling. "
-"'Ignore Proportions' takes space for function name drawing <em>before</em> "
-"drawing children. Note that size proportions can get <em>heavily</em> wrong.</p>"
-"<p>This is a <em>TreeMap</em> widget. Keyboard navigation is available with the "
-"left/right arrow keys for traversing siblings, and up/down arrow keys to go a "
-"nesting level up/down. <em>Return</em> activates the current item.</p>"
-msgstr ""
-"<p>外觀選項可以在選單中找到。要取得精準的大小比例，選擇「隱藏不正確的框線」。這個模式可能會<em>非常</em>"
-"花時間，您可能要先限制一下最多的巢狀等級。「最佳」會依父函式的比例來分離子函式的方向。「總是最佳」會依剩餘空間來決定。「忽略比例」會在畫子函式前先保留函式名稱空"
-"間。注意大小的比例有可能會錯得很離譜。</p> "
-"<p>有一種「樹狀地圖」元件。可以用鍵盤左右鍵來導覽所有的子節點，上下鍵則可以進出巢狀等級。Enter 鍵會啟動目前的項目。</p>"
-
-#: callmapview.cpp:167
-msgid "Go To"
-msgstr "跳到"
-
-#: callmapview.cpp:184
-msgid "Stop at Depth"
-msgstr "停止於深度"
-
-#: callmapview.cpp:190
-msgid "Depth 10"
-msgstr "深度 10"
-
-#: callmapview.cpp:192
-msgid "Depth 15"
-msgstr "深度 15"
-
-#: callmapview.cpp:194
-msgid "Depth 20"
-msgstr "深度 20"
-
-#: callmapview.cpp:204
-msgid "Decrement Depth (to %1)"
-msgstr "遞減深度（到 %1）"
-
-#: callmapview.cpp:205
-msgid "Increment Depth (to %1)"
-msgstr "遞增深度（到 %1）"
-
-#: callmapview.cpp:209
-msgid "Stop at Function"
-msgstr "停止於函式"
-
-#: callmapview.cpp:210
-msgid "No Function Limit"
-msgstr "無函式限制"
-
-#: callmapview.cpp:240
-msgid "Stop at Area"
-msgstr "停止於區域"
-
-#: callmapview.cpp:246
-msgid "50 Pixels"
-msgstr "50 像素"
-
-#: callmapview.cpp:248
-msgid "100 Pixels"
-msgstr "100 像素"
-
-#: callmapview.cpp:250
-msgid "200 Pixels"
-msgstr "200 像素"
-
-#: callmapview.cpp:252
-msgid "500 Pixels"
-msgstr "500 像素"
-
-#: callmapview.cpp:266
-msgid "Half Area Limit (to %1)"
-msgstr "將區域限制減半（到 %1）"
-
-#: callmapview.cpp:273
-msgid "Visualisation"
-msgstr "視覺化"
-
-#: callmapview.cpp:277
-msgid "Split Direction"
-msgstr "分割方向"
-
-#: callmapview.cpp:279
-msgid "Skip Incorrect Borders"
-msgstr "略過不正確的邊框"
-
-#: callmapview.cpp:284
-msgid "Border Width"
-msgstr "邊框寬度"
-
-#: callmapview.cpp:285
-msgid "Border 0"
-msgstr "邊框 0"
-
-#: callmapview.cpp:288
-msgid "Border 1"
-msgstr "邊框 1"
-
-#: callmapview.cpp:290
-msgid "Border 2"
-msgstr "邊框 2"
-
-#: callmapview.cpp:292
-msgid "Border 3"
-msgstr "邊框 3"
-
-#: callmapview.cpp:297
-msgid "Draw Symbol Names"
-msgstr "繪製符號名稱"
-
-#: callmapview.cpp:298
-msgid "Draw Cost"
-msgstr "繪製花費"
-
-#: callmapview.cpp:299
-msgid "Draw Location"
-msgstr "繪製位置"
-
-#: callmapview.cpp:300
-msgid "Draw Calls"
-msgstr "繪製呼叫"
-
-#: callmapview.cpp:431
-msgid "Call Map: Current is '%1'"
-msgstr "呼叫映射：目前是 %1"
-
-#: callmapview.cpp:599
-msgid "(no function)"
-msgstr "（無函式）"
-
-#: callmapview.cpp:741 callmapview.cpp:858
-msgid "(no call)"
-msgstr "（無呼叫）"
-
-#: cachegrindloader.cpp:141
-msgid "Import filter for Cachegrind/Callgrind generated profile data files"
-msgstr "Cachegrind/Callgrind 產生的分析檔資料檔匯入過濾器"
-
-#: cachegrindloader.cpp:738
-#, c-format
-msgid "Loading %1"
-msgstr "載入 %1 中"
-
-#: callview.cpp:47 callview.cpp:51
-msgid "Count"
-msgstr "計數"
-
-#: callview.cpp:85
-msgid ""
-"<b>List of direct Callers</b>"
-"<p>This list shows all functions calling the current selected one directly, "
-"together with a call count and the cost spent in the current selected function "
-"while being called from the function from the list.</p>"
-"<p>An icon instead of an inclusive cost specifies that this is a call inside of "
-"a recursive cycle. An inclusive cost makes no sense here.</p>"
-"<p>Selecting a function makes it the current selected one of this information "
-"panel. If there are two panels (Split mode), the function of the other panel is "
-"changed instead.</p>"
-msgstr ""
-"<b>直接呼叫者清單</b> "
-"<p>這個清單顯示直接呼叫目前選取函式的所有函式，以及呼叫次數與呼叫花費。</p> "
-"<p>如果顯示一圖示而非引入花費，則表示這個呼叫是在遞迴循環之中。引入花費在此沒有意義。</p> "
-"<p>選擇某個函式會在目前資訊面板的顯示中跳到該函式。如果有兩個面板（分割模式），則會變換另一個面板的函式。</p>"
+#: callitem.cpp:82 partlistitem.cpp:152
+msgid "(active)"
+msgstr "（活躍）"
 
-#: callview.cpp:98
-msgid ""
-"<b>List of direct Callees</b>"
-"<p>This list shows all functions called by the current selected one directly, "
-"together with a call count and the cost spent in this function while being "
-"called from the selected function.</p>"
-"<p>Selecting a function makes it the current selected one of this information "
-"panel. If there are two panels (Split mode), the function of the other panel is "
-"changed instead.</p>"
-msgstr ""
-"<b>直接被呼叫者清單</b> "
-"<p>這個清單顯示目前選取函式直接呼叫的所有函式，以及呼叫次數與呼叫花費。</p> "
-"<p>選擇某個函式會在目前資訊面板的顯示中跳到該函式。如果有兩個面板（分割模式），則會變換另一個面板的函式。</p>"
+#: instrview.cpp:129
+msgid "Hex"
+msgstr "十六進位值"
 
-#: costtypeitem.cpp:56
-msgid "Unknown Type"
-msgstr "未知類型"
+#: instrview.cpp:132
+msgid "Source Position"
+msgstr "源碼位置"
 
-#: tips.cpp:3
+#: instrview.cpp:163
 msgid ""
-"<p>...that the <em>What's This?</em> help for every GUI widget\n"
-"in KCachegrind contains detailed usage information for this widget?\n"
-"It is highly recommended to read at least these help texts on first\n"
-"use. Request <em>What's This?</em> help by pressing\n"
-"Shift+F1 and clicking on the widget.</p>\n"
+"<b>Annotated Assembler</b>"
+"<p>The annotated assembler list shows the machine code instructions of the "
+"current selected function together with (self) cost spent while executing an "
+"instruction. If this is a call instruction, lines with details on the call "
+"happening are inserted into the source: the cost spent inside of the call, the "
+"number of calls happening, and the call destination.</p>"
+"<p>The disassembler output shown is generated with the 'objdump' utility from "
+"the 'binutils' package.</p>"
+"<p>Select a line with call information to make the destination function of this "
+"call current.</p>"
 msgstr ""
-"<p>每個使用者介面元件中的「這是什麼？」說明內含了此元件的詳細用法資訊。建議第一次使用時先閱讀它。您以可以按 Shift+F1 叫出。</p>\n"
+"<b>註記組譯器（Annotated Assembler）</b> "
+"<p>註記組譯器顯示目前選取的函式的機器碼指令，以及執行該指令時的花費。如果是呼叫指令，則呼叫時發生的詳情會插入到源碼中，包括呼叫的花費，呼叫的次數，以及呼叫的"
+"目的地。</p> "
+"<p>反組譯輸出可以用 objdump 產生，通常會包在 binutils 套件中。</p> "
+"<p>選取呼叫資訊中的某一行可以眺到被呼叫的函式。</p>"
 
-#: tips.cpp:12
-msgid ""
-"<p>...that you can get profile information at instruction level\n"
-"with Calltree when you provide the option <em>--dump-instr=yes</em>?\n"
-"Use the Assembler View for the instruction annotations.\n"
-"</p>\n"
-msgstr ""
-"<p>若您提供這個選項：<em>--dump-instr=yes</em>，您可以在呼叫樹模式取得指令層級的分析檔資訊。\n"
-"用「組譯器檢視」取得指令的註記。</p>\n"
+#: instrview.cpp:195
+#, c-format
+msgid "Go to Address %1"
+msgstr "跳到位址 %1"
 
-#: tips.cpp:20
-msgid ""
-"<p>...that you can use Alt-Left/Right keys of your keyboard to go\n"
-"back/forward in the active object history ?</p>\n"
-msgstr ""
-"<p>您可以用 Alt 加上左右鍵來在目前的物件歷史中往返。</p>\n"
+#: instrview.cpp:207
+msgid "Hex Code"
+msgstr "十六進位碼"
 
-#: tips.cpp:26
-msgid ""
-"<p>...that you can navigate in the Callee/Caller Map View using\n"
-"arrow keys? Use Left/Right to change to siblings of the current\n"
-"item; use Up/Down to go one nesting level up/down. To select\n"
-"the current item, press Space, and to activate it, press Return.\n"
-"</p>\n"
-msgstr ""
-"<p>您可以用方向鍵在呼叫者/被呼叫者地圖中導覽。用左右鍵來跳到相鄰的節點，上下鍵則在不同的巢狀等級間來回。要選取目前的項目，您可以按空白鍵，按下 Enter "
-"鍵則是啟用。</p>\n"
+#: instrview.cpp:426
+msgid "There is no instruction info in the profile data file."
+msgstr "此分析資料檔中沒有指令資訊。"
 
-#: tips.cpp:35
-msgid ""
-"<p>...that you can navigate in the Call Graph View using\n"
-"arrow keys? Use Up/Down to go one calling level up/down, alternating\n"
-"between calls and functions. Use Left/Right to change to siblings of a current\n"
-"selected call. To activate the current item, press Return.\n"
-"</p>\n"
-msgstr ""
-"<p>您可以用方向鍵在呼叫圖檢視中導覽。用左右鍵來跳到與目前選取的呼叫相鄰的節點，上下鍵則在不同的呼叫等級間來回，切換呼叫函式。按下 Enter "
-"鍵則是啟用目前的項目。</p>\n"
+#: instrview.cpp:428
+msgid "For the Valgrind Calltree Skin, rerun with option"
+msgstr "要用 Valgrind Calltree Skin，請重新執行並指定選項"
 
-#: tips.cpp:44
-msgid ""
-"<p>...that you can rapidly locate a function by entering part of its\n"
-"name (case-insensitive) into the edit line of the toolbar\n"
-"and hit return?</p>\n"
-msgstr ""
-"<p>您可以在工具列的編輯欄中輸入某函式的部份名稱（不分大小寫），再按下 Enter 鍵就可以快速找到該函式的位置。</p>\n"
+#: instrview.cpp:429
+msgid "      --dump-instr=yes"
+msgstr "      --dump-instr=yes"
 
-#: tips.cpp:51
-msgid ""
-"<p>...that you can assign custom colors to \n"
-"ELF objects/C++ Classes/Source Files for graph coloring\n"
-"in <em>Settings->Configure KCachegrind...</em>?</p>\n"
-msgstr ""
-"<p>您可以指定自訂的顏色給圖形中的 ELF 物件、C++ 類別或源碼檔。您只要在「設定」─「設定 KCachegrind...」中設定即可。</p>\n"
+#: instrview.cpp:430
+msgid "To see (conditional) jumps, additionally specify"
+msgstr "想要看條件式的跳躍，請額外指定選項"
 
-#: tips.cpp:58
-msgid ""
-"<p>...that you can see if debug info is available for a selected \n"
-"function by looking at the location label in the Info tab or\n"
-"the source listing header in the source tab?</p>\n"
-"<p>There must be the name of the source file (with extension).\n"
-"If KCachegrind still doesn't show the source, make sure that you\n"
-"have added the directory of the source file to the\n"
-"<em>Source Directories</em> list in the configuration.\n"
-msgstr ""
-"<p>如果有提供除錯資訊的話，您可以在資訊分頁中的「位置」標籤處，或是源碼分頁處的源碼標頭處看到所選取函式的除錯資訊。</p>\n"
-"<p>必須要有源碼檔的檔名（包括副檔名）。如果 KCachegrind 還是沒有顯示源碼，請確定您已將源碼檔所在的路徑加到設定中的「源碼目錄」清單中。</p>"
-"\n"
+#: instrview.cpp:431
+msgid "      --trace-jump=yes"
+msgstr "      --trace-jump=yes"
 
-#: tips.cpp:69
-msgid ""
-"<p>...that you can configure whether KCachgrind should\n"
-"show absolute event counts or relative ones (percentage display)?</p>\n"
-msgstr ""
-"<p>您可以設定是否要讓 KCachegrind 顯示絕對事件計數或相對事件計數（以百分比顯示）。</p>\n"
+#: instrview.cpp:629
+msgid "There is an error trying to execute the command"
+msgstr "執行此指令時發生錯誤"
 
-#: tips.cpp:75
-msgid ""
-"<p>...that you can configure the maximum number of items\n"
-"for all function lists in KCachegrind? Limiting the number\n"
-"of items is done to get a fast reacting GUI. The last item in\n"
-"the list will show you the number of skipped functions, together\n"
-"with a cost condition for these skipped functions.</p>\n"
-"<p>To activate a function with small costs, search for it and select\n"
-"it in the flat profile. Selecting functions with small cost will\n"
-"temporarily add them to the flat profile list.</p>\n"
-msgstr ""
-"<p>您可以在 KCachegrind "
-"中設定所有函式清單中的最大顯示數目。這樣的話，清單中的最後一個項目會顯示出還有多少函式未顯示出來，以及這些未顯示函式的花費。</p>\n"
-"<p>要啟動較少花費的函式，您可以搜尋並在簡單分析檔中選取。這樣會暫時新增到簡單分析檔清單中。</p>\n"
+#: instrview.cpp:634 instrview.cpp:900
+msgid "Check that you have installed 'objdump'."
+msgstr "請檢查您是否已安裝 objdump。"
 
-#: tips.cpp:87
-msgid ""
-"<p>...that the Coverage tab - in contrast to the Call Lists tab -\n"
-"shows <em>all</em> functions that are calling the selected function\n"
-"(upper part) / are called by the selected function (bottom part),\n"
-"no matter how many function are between them on the stack?</p>\n"
-"<p>Examples:</p>\n"
-"<p>An entry in the upper list for function foo1() with a value of 50%\n"
-"with function bar() selected means that 50% of all the cost of function\n"
-"bar() happened while called from function foo1().</p>\n"
-"<p>An entry in the bottom list for function foo2() with a value of 50%\n"
-"with function bar() selected means that 50% of all the cost of function\n"
-"bar() happened while calling foo2() from bar().</p>\n"
-msgstr ""
-"<p>「總體呼叫頁」顯示的是呼叫選取的函式的所有函式（上半部），以及被選取的函式呼叫的函式（下半部），包括直接與間接呼叫。</p>\n"
-"<p>例如：</p>\n"
-"<p>選取函式 bar()，上半部清單中的函式 foo1() 數值 50% 表示從 foo1() 呼叫 bar() 時的花費佔全部花費的 50%。</p>\n"
-"<p>下半部清單中的函式 foo2() 數值 50% 表示 bar() 呼叫 foo2() 時的花費佔全部花費的 50%。</p>\n"
+#: instrview.cpp:636 instrview.cpp:902
+msgid "This utility can be found in the 'binutils' package."
+msgstr "這個工具可以在 binutils 套件中找到。"
 
-#: tips.cpp:102
-msgid ""
-"<p>...that waiting for the tool tip inside of a tree map\n"
-"shows the list of names of the nested rectangles the mouse\n"
-"pointer is over?</p>\n"
-"<p>Items from this list can be selected by pressing the right\n"
-"mouse button.</p>\n"
-msgstr ""
-"<p>滑鼠指標指在樹狀地圖中上頭時稍等一下，會跑出逼個工具提示，裡面會顯示巢狀矩形的名稱清單。</p>\n"
-"<p>清單中的項目可以用滑鼠右鍵選取。</p>\n"
+#: instrview.cpp:739
+msgid "(No Assembler)"
+msgstr "（沒有組譯器）"
 
-#: tips.cpp:111
+#: instrview.cpp:875
+#, c-format
 msgid ""
-"<p>...that you can constrain the cost counts shown to only a\n"
-"few parts of the whole trace by selecting these parts in the\n"
-"\"Trace Selection\" Dockable?</p>\n"
-"<p>To generate multiple parts in a profiling run with\n"
-"cachegrind, use e.g. option --cachedumps=xxx for parts\n"
-"of a length of xxx basic blocks (A basic block is a run\n"
-"of not-branching assembler statements inside of your program\n"
-"code).</p>\n"
-msgstr ""
-"<p>您可以限制只顯示一小部份部件的花費計數，只要在「追蹤選擇」元件中選取這些部件即可。</p>\n"
-"<p>要在 cachegrind 的分析執行中產生多個部件，可以用像這樣的選項：--cachedumps=xxx 表示 xxx "
-"個基本區塊。（基本區塊是在您的程式碼中不分支的組譯敘述）。</p>\n"
-
-#: configdlg.cpp:60
-msgid "Source Files"
-msgstr "程式源碼檔案"
-
-#: configdlg.cpp:61
-msgid "C++ Classes"
-msgstr "C++ 類別"
+"_n: There is %n cost line without assembler code.\n"
+"There are %n cost lines without assembler code."
+msgstr "有 %n 個花費線沒有組譯碼。"
 
-#: configdlg.cpp:62
-msgid "Function (no Grouping)"
-msgstr "功能（無群組）"
+#: instrview.cpp:877
+msgid "This happens because the code of"
+msgstr "發生的原因是因為這個的程式碼："
 
-#: configdlg.cpp:157 configdlg.cpp:350 configdlg.cpp:371
-msgid "(always)"
-msgstr "（總是）"
+#: instrview.cpp:880
+msgid "does not seem to match the profile data file."
+msgstr "似乎無法符合此分析資料檔。"
 
-#: configdlg.cpp:210
-msgid "KCachegrind Configuration"
-msgstr "KCachegrind 設定"
+#: instrview.cpp:883
+msgid "Are you using an old profile data file or is the above mentioned"
+msgstr "您正使用舊的分析資料檔，還是像上面提到的"
 
-#: configdlg.cpp:211
-msgid ""
-"The Maximum Number of List Items should be below 500.The previous set value "
-"(%1) will still be used."
-msgstr "最大的清單項目數應該在 500 以下。將改用之前的設定值（%1）。"
+#: instrview.cpp:885
+msgid "ELF object from an updated installation/another machine?"
+msgstr "這是從已更新的安裝或其他機器來的 ELF 物件嗎？"
 
-#: configdlg.cpp:384
-msgid "Choose Source Folder"
-msgstr "選擇來源資料夾"
+#: instrview.cpp:893
+msgid "There seems to be an error trying to execute the command"
+msgstr "試著執行此命令時發生錯誤"
 
-#: partgraph.cpp:167
-#, c-format
-msgid "Profile Part %1"
-msgstr "分析檔部件 %1"
+#: instrview.cpp:898
+msgid "Check that the ELF object used in the command exists."
+msgstr "請檢查命令中使用的 ELF 物件存在。"
 
-#: partgraph.cpp:226
-msgid "(no trace)"
-msgstr "（無追蹤）"
+#: partlistitem.cpp:49
+msgid " (Thread %1)"
+msgstr "（執行緒 %1）"
 
-#: partgraph.cpp:229
-msgid "(no part)"
-msgstr "（無部件）"
+#: partlistitem.cpp:56
+msgid "(none)"
+msgstr "（無）"
 
-#: partview.cpp:51
-msgid "Comment"
-msgstr "註解"
+#: main.cpp:38
+msgid "Run <exec> under cachegrind"
+msgstr "在 cachegrind 下執行<exec>"
 
-#: partview.cpp:73
-msgid ""
-"<b>Trace Part List</b>"
-"<p>This list shows all trace parts of the loaded trace. For each part, the "
-"self/inclusive cost of the current selected function, spent in the part, is "
-"shown; percentage costs are always relative to the total cost <em>"
-"of the part</em> (not to the whole trace as in the Trace Part Overview). Also "
-"shown are the calls happening to/from the current function inside of the trace "
-"part.</p>"
-"<p>By choosing one or more trace parts from the list, the costs shown all over "
-"KCachegrind will only be the ones spent in the selected part(s). If no list "
-"selection is shown, in fact all trace parts are selected implicitly.</p>"
-"<p>This is a multi-selection list. You can select ranges by dragging the mouse "
-"or use SHIFT/CTRL modifiers. Selection/Deselection of trace parts can also be "
-"done by using the Trace Part Overview Dockable. This one also supports multiple "
-"selection.</p>"
-"<p>Note that the list is hidden if only one trace part is loaded.</p>"
-msgstr ""
-"<b>追蹤部件清單</b> "
-"<p>這份清單顯示載入的追蹤的所有追蹤部件。每個部件中包含目前選取的函式在該部件中的自身與引入的花費，百分比是相對於該部件的總花費（不是追蹤部件概觀中的總花費）"
-"。另外也會呼叫目前函式的呼叫者與被呼叫者。</p> "
-"<p>若從清單中選擇追蹤部件，就只會顯示選取的部件的花費。如果沒有選擇任何部件，則預設是選取所有的部件。</p> "
-"<p>這是可以多重選擇的清單，您可以拖曳滑鼠來選取一個範圍，或是用 Shift 或 Ctrl 鍵來在「追蹤部件概觀」元件中選擇部件。</p> "
-"<p>注意若是只載入一個追蹤部件，則此元件是隱藏的。</p>"
+#: main.cpp:39
+msgid "Show information of this trace"
+msgstr "顯示此追蹤的資訊"
 
-#: partview.cpp:106
-msgid "Select '%1'"
-msgstr "選擇 %1"
+#: main.cpp:46
+msgid "KCachegrind"
+msgstr "KCachegrind"
 
-#: partview.cpp:107
-msgid "Hide '%1'"
-msgstr "隱藏 %1"
+#: main.cpp:48
+msgid "TDE Frontend for Cachegrind"
+msgstr "Cachegrind 的 TDE 前端程式"
 
-#: partview.cpp:111
-msgid "Hide Selected"
-msgstr "隱藏已選取項目"
+#: main.cpp:50
+msgid "(C) 2002, 2003, 2004"
+msgstr "(c) 2002, 2003, 2004"
 
-#: partview.cpp:112
-msgid "Show All"
-msgstr "全部顯示"
+#: main.cpp:53
+msgid "Author/Maintainer"
+msgstr "作者/維護者"