Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: tdeutils/kcmlirc
Translate-URL: https://mirror.git.trinitydesktop.org/weblate/projects/tdeutils/kcmlirc/
(cherry picked from commit 54a7c0fcde1c0999303d9895f0965a72849587be)

1 files changed, 184 insertions, 237 deletions

diff --git a/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po b/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po
index b5c8463e3b9..2f89266974b 100644
--- a/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po
+++ b/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po
@@ -4,7 +4,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmlirc\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-25 19:23+0100\n"
 "PO-Revision-Date: 2006-02-13 11:12+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -15,13 +15,13 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.10.2\n"
 
-#: _translatorinfo.cpp:1
+#: _translatorinfo:1
 msgid ""
 "_: NAME OF TRANSLATORS\n"
 "Your names"
 msgstr "Frank Weng (a.k.a. Franklin)"
 
-#: _translatorinfo.cpp:3
+#: _translatorinfo:2
 msgid ""
 "_: EMAIL OF TRANSLATORS\n"
 "Your emails"
@@ -29,8 +29,8 @@ msgstr "franklin at goodhorse dot idv dot tw"
 
 #: addaction.cpp:99
 msgid ""
-"You did not select a mode of that remote control. Please use %1, or revert back "
-"to select a different mode."
+"You did not select a mode of that remote control. Please use %1, or revert "
+"back to select a different mode."
 msgstr "您尚未選取遙控模式。請使用 %1，或是退回重新選擇不同的模式。"
 
 #: addaction.cpp:101
@@ -45,348 +45,331 @@ msgstr "<匿名>"
 msgid "anonymous"
 msgstr "匿名"
 
-#: editaction.cpp:65 editaction.cpp:108 kcmlirc.cpp:132
+#: editaction.cpp:65 editaction.cpp:108 kcmlirc.cpp:133
 msgid "[Exit current mode]"
 msgstr "【離開目前的模式】"
 
-#: kcmlirc.cpp:55
+#: kcmlirc.cpp:56
 msgid "TDE Lirc"
 msgstr "TDE Lirc"
 
-#: kcmlirc.cpp:55
+#: kcmlirc.cpp:56
 msgid "The TDE IR Remote Control System"
 msgstr "TDE 紅外線遙控系統"
 
-#: kcmlirc.cpp:55
+#: kcmlirc.cpp:56
 msgid ""
-"Use this to configure TDE's infrared remote control system in order to control "
-"any TDE application with your infrared remote control."
+"Use this to configure TDE's infrared remote control system in order to "
+"control any TDE application with your infrared remote control."
 msgstr "用這個來設定 TDE 的紅外線遙控系統。"
 
-#: kcmlirc.cpp:57
+#: kcmlirc.cpp:58
 msgid ""
-"<h1>Remote Controls</h1>"
-"<p>This module allows you to configure bindings between your remote controls "
-"and TDE applications. Simply select your remote control and click Add under the "
-"Actions/Buttons list. If you want TDE to attempt to automatically assign "
-"buttons to a supported application's actions, try clicking the Auto-Populate "
-"button.</p>"
-"<p>To view the recognised applications and remote controls, simply select the "
-"<em>Loaded Extensions</em> tab.</p>"
+"<h1>Remote Controls</h1><p>This module allows you to configure bindings "
+"between your remote controls and TDE applications. Simply select your remote "
+"control and click Add under the Actions/Buttons list. If you want TDE to "
+"attempt to automatically assign buttons to a supported application's "
+"actions, try clicking the Auto-Populate button.</p><p>To view the recognised "
+"applications and remote controls, simply select the <em>Loaded Extensions</"
+"em> tab.</p>"
 msgstr ""
-"<h1>遙控</h1>"
-"<p>這個模組讓您可以設定您的遙控按鍵與 TDE 應用程式之間的關聯。只要按下您要的按鍵，並點選「動作/按鈕清單」中的「加入」鍵即可。如果您要讓 TDE "
-"自動分配按鍵給已支援的應用程式，試著點選「自動分配」鍵。</p> "
-"<p>要顯示已加入遙控的應用程式，請選擇<em>載入的延伸程式</em>頁。,/p>"
+"<h1>遙控</h1><p>這個模組讓您可以設定您的遙控按鍵與 TDE 應用程式之間的關聯。只"
+"要按下您要的按鍵，並點選「動作/按鈕清單」中的「加入」鍵即可。如果您要讓 TDE "
+"自動分配按鍵給已支援的應用程式，試著點選「自動分配」鍵。</p> <p>要顯示已加入"
+"遙控的應用程式，請選擇<em>載入的延伸程式</em>頁。,/p>"
 
-#: kcmlirc.cpp:61
+#: kcmlirc.cpp:62
 msgid ""
 "The Infrared Remote Control software is not currently running. This "
-"configuration module will not work properly without it. Would you like to start "
-"it now?"
+"configuration module will not work properly without it. Would you like to "
+"start it now?"
 msgstr "紅外線遙控軟體尚未執行中，如此這個設定無法正確運作。您要啟動它嗎？"
 
-#: kcmlirc.cpp:61
+#: kcmlirc.cpp:62
 msgid "Software Not Running"
 msgstr "軟體未啟動"
 
-#: kcmlirc.cpp:61
+#: kcmlirc.cpp:62
 msgid "Start"
 msgstr "請啟動它"
 
-#: kcmlirc.cpp:61 kcmlirc.cpp:66
+#: kcmlirc.cpp:62 kcmlirc.cpp:67
 msgid "Do Not Start"
 msgstr "不要啟動"
 
-#: kcmlirc.cpp:66
+#: kcmlirc.cpp:67
 msgid ""
-"Would you like the infrared remote control software to start automatically when "
-"you begin TDE?"
+"Would you like the infrared remote control software to start automatically "
+"when you begin TDE?"
 msgstr "您要在 TDE 開始時自動啟動紅外線遙控軟體嗎？"
 
-#: kcmlirc.cpp:66
+#: kcmlirc.cpp:67
 msgid "Automatically Start?"
 msgstr "要自動啟動嗎？"
 
-#: kcmlirc.cpp:66
+#: kcmlirc.cpp:67
 msgid "Start Automatically"
 msgstr "要"
 
-#: kcmlirc.cpp:336
+#: kcmlirc.cpp:337
 msgid "Are you sure you want to remove %1 and all its actions?"
 msgstr "您確定要移除 %1 及它所有關聯的動作？"
 
-#: kcmlirc.cpp:336
+#: kcmlirc.cpp:337
 msgid "Erase Actions?"
 msgstr "移除動作？"
 
-#: kcmlirc.cpp:358
+#: kcmlirc.cpp:359
 msgid ""
 "You may only drag the selected items onto a mode of the same remote control"
 msgstr "您只能將選擇的元件拖曳到同一個遙控系統下的其他模式。"
 
-#: kcmlirc.cpp:358
+#: kcmlirc.cpp:359
 msgid "You May Not Drag Here"
 msgstr "無法拖曳到這裡"
 
-#: kcmlirc.cpp:380
+#: kcmlirc.cpp:381
 msgid "Actions <i>always</i> available"
 msgstr "動作可以在<i>所有的模式</i>下使用。"
 
-#: kcmlirc.cpp:380
+#: kcmlirc.cpp:381
 msgid "Actions available only in mode <b>%1</b>"
 msgstr "動作只能在模式<b>%1</b>下使用。"
 
-#. i18n: file addactionbase.ui line 94
-#: kcmlirc.cpp:441 kcmlirc.cpp:471 kcmlirc.cpp:476 rc.cpp:12
+#: kcmlirc.cpp:424 kcmlircbase.ui.h:28
+msgid "Default"
+msgstr ""
+
+#: addactionbase.ui:94 kcmlirc.cpp:442 kcmlirc.cpp:472 kcmlirc.cpp:477
 #, no-c-format
 msgid "Applications"
 msgstr "應用程式"
 
-#. i18n: file newmode.ui line 25
-#: kcmlirc.cpp:450 kcmlirc.cpp:473 kcmlirc.cpp:486 rc.cpp:336
+#: kcmlirc.cpp:451 kcmlirc.cpp:474 kcmlirc.cpp:487 newmode.ui:25
 #, no-c-format
 msgid "Remote Controls"
 msgstr "遙控鍵"
 
-#: kcmlirc.cpp:470 kcmlirc.cpp:484 kcmlirc.cpp:494
+#: kcmlirc.cpp:471 kcmlirc.cpp:485 kcmlirc.cpp:495
 msgid "Information on <b>%1</b>:"
 msgstr "<b>%1</b>的資訊："
 
-#: kcmlirc.cpp:472
+#: kcmlirc.cpp:473
 msgid "Number of Applications"
 msgstr "應用程式數量"
 
-#: kcmlirc.cpp:474
+#: kcmlirc.cpp:475
 msgid "Number of Remote Controls"
 msgstr "遙控鍵數量"
 
-#: kcmlirc.cpp:480 kcmlirc.cpp:490
+#: kcmlirc.cpp:481 kcmlirc.cpp:491
 msgid "Extension Name"
 msgstr "延伸程式名稱"
 
-#: kcmlirc.cpp:481 kcmlirc.cpp:491
+#: kcmlirc.cpp:482 kcmlirc.cpp:492
 msgid "Extension Author"
 msgstr "延伸程式作者"
 
-#: kcmlirc.cpp:482
+#: kcmlirc.cpp:483
 msgid "Application Identifier"
 msgstr "應用程式代碼"
 
-#: kcmlirc.cpp:483
+#: kcmlirc.cpp:484
 msgid "Number of Actions"
 msgstr "動作數量"
 
-#: kcmlirc.cpp:492
+#: kcmlirc.cpp:493
 msgid "Remote Control Identifier"
 msgstr "遙控代碼"
 
-#: kcmlirc.cpp:493
+#: kcmlirc.cpp:494
 msgid "Number of Buttons"
 msgstr "按鍵數量"
 
-#. i18n: file addactionbase.ui line 17
-#: rc.cpp:3
+#: kcmlircbase.ui.h:27
+msgid "Remote Control"
+msgstr "遙控"
+
+#: kcmlircbase.ui.h:29
+msgid "Icon"
+msgstr "圖示"
+
+#: addactionbase.ui:17
 #, no-c-format
 msgid "Add Action"
 msgstr "新增動作"
 
-#. i18n: file addactionbase.ui line 24
-#: rc.cpp:6
+#: addactionbase.ui:24
 #, no-c-format
 msgid "Select Action to Carry Out on Button Press"
 msgstr "選擇此按鍵按下後要執行的動作"
 
-#. i18n: file addactionbase.ui line 60
-#: rc.cpp:9
+#: addactionbase.ui:60
 #, no-c-format
 msgid "I wish to select an &application below for usage:"
 msgstr "我希望選擇以下的應用程式之一(&A)："
 
-#. i18n: file addactionbase.ui line 159
-#: rc.cpp:15
+#: addactionbase.ui:159
 #, no-c-format
 msgid "I wish to manually select a &function from a running program"
 msgstr "我希望手動選擇要執行的程式功能(&F)"
 
-#. i18n: file addactionbase.ui line 184
-#: rc.cpp:18
+#: addactionbase.ui:184
 #, no-c-format
 msgid "I wish to change the remote control's &mode"
 msgstr "我希望變更遙控模式(&M)"
 
-#. i18n: file addactionbase.ui line 213
-#: rc.cpp:21
+#: addactionbase.ui:213
 #, no-c-format
 msgid "Select Button to Configure"
 msgstr "選擇要設定的按鍵"
 
-#. i18n: file addactionbase.ui line 224
-#: rc.cpp:24
+#: addactionbase.ui:224
 #, no-c-format
 msgid ""
 "You are attempting to configure an action for a button on [remote] (in mode "
 "[mode]). Press a button on this remote control or select from the list."
-msgstr "您決定設定某一遙控按鍵的動作(在模式 [mode] 下)。請按下此按鍵，或是從清單中選擇。"
+msgstr ""
+"您決定設定某一遙控按鍵的動作(在模式 [mode] 下)。請按下此按鍵，或是從清單中選"
+"擇。"
 
-#. i18n: file addactionbase.ui line 258
-#: rc.cpp:27 rc.cpp:294
+#: addactionbase.ui:258 kcmlircbase.ui:227
 #, no-c-format
 msgid "Button"
 msgstr "按鍵"
 
-#. i18n: file addactionbase.ui line 308
-#: rc.cpp:30 rc.cpp:69
+#: addactionbase.ui:308 addactionbase.ui:482
 #, no-c-format
 msgid "Select Program Function"
 msgstr "選擇程式功能"
 
-#. i18n: file addactionbase.ui line 324
-#: rc.cpp:33 rc.cpp:297
+#: addactionbase.ui:324 kcmlircbase.ui:238
 #, no-c-format
 msgid "Program"
 msgstr "程式"
 
-#. i18n: file addactionbase.ui line 335
-#: rc.cpp:36
+#: addactionbase.ui:335
 #, no-c-format
 msgid "IR Kick"
 msgstr "IR Kick"
 
-#. i18n: file addactionbase.ui line 343
-#: rc.cpp:39
+#: addactionbase.ui:343
 #, no-c-format
 msgid "Xine"
 msgstr "Xine"
 
-#. i18n: file addactionbase.ui line 351
-#: rc.cpp:42 rc.cpp:45
+#: addactionbase.ui:351 addactionbase.ui:358
 #, no-c-format
 msgid "kicker"
 msgstr "kicker"
 
-#. i18n: file addactionbase.ui line 367
-#: rc.cpp:48 rc.cpp:57
+#: addactionbase.ui:367 addactionbase.ui:390
 #, no-c-format
 msgid "noatun"
 msgstr "noatun"
 
-#. i18n: file addactionbase.ui line 374
-#: rc.cpp:51
+#: addactionbase.ui:374
 #, no-c-format
 msgid "Marquis"
 msgstr "Marquis"
 
-#. i18n: file addactionbase.ui line 382
-#: rc.cpp:54
+#: addactionbase.ui:382
 #, no-c-format
 msgid "Noatun"
 msgstr "Noatun"
 
-#. i18n: file addactionbase.ui line 429
-#: rc.cpp:60 rc.cpp:75 rc.cpp:159 rc.cpp:300
+#: addactionbase.ui:429 addactionbase.ui:541 editactionbase.ui:34
+#: kcmlircbase.ui:249
 #, no-c-format
 msgid "Function"
 msgstr "功能"
 
-#. i18n: file addactionbase.ui line 440
-#: rc.cpp:63
+#: addactionbase.ui:440
 #, no-c-format
 msgid "Parameter"
 msgstr "參數"
 
-#. i18n: file addactionbase.ui line 451
-#: rc.cpp:66
+#: addactionbase.ui:451
 #, no-c-format
 msgid "Prototype"
 msgstr "原型"
 
-#. i18n: file addactionbase.ui line 507
-#: rc.cpp:72
+#: addactionbase.ui:507
 #, no-c-format
 msgid "&Perform a function in the application:"
 msgstr "執行應用程式中的功能(&P)："
 
-#. i18n: file addactionbase.ui line 563
-#: rc.cpp:81
+#: addactionbase.ui:552 editactionbase.ui:603 kcmlircbase.ui:260
+#, fuzzy, no-c-format
+msgid "Options"
+msgstr "<b>選項</b>"
+
+#: addactionbase.ui:563
 #, no-c-format
 msgid "Description"
 msgstr "描述"
 
-#. i18n: file addactionbase.ui line 594
-#: rc.cpp:84
+#: addactionbase.ui:594
 #, no-c-format
 msgid "&Just start the application. Do not do anything else."
 msgstr "只要啟動應用程式，不做任何其他動作(&J)。"
 
-#. i18n: file addactionbase.ui line 623
-#: rc.cpp:87
+#: addactionbase.ui:623
 #, no-c-format
 msgid "Populate Parameters"
 msgstr "分配參數"
 
-#. i18n: file addactionbase.ui line 632
-#: rc.cpp:90
+#: addactionbase.ui:632
 #, no-c-format
 msgid "Option Description"
 msgstr "選項描述"
 
-#. i18n: file addactionbase.ui line 643
-#: rc.cpp:93
+#: addactionbase.ui:643
 #, no-c-format
 msgid "Value"
 msgstr "值"
 
-#. i18n: file addactionbase.ui line 654
-#: rc.cpp:96
+#: addactionbase.ui:654
 #, no-c-format
 msgid "Type"
 msgstr "型態"
 
-#. i18n: file addactionbase.ui line 665
-#: rc.cpp:99
+#: addactionbase.ui:665
 #, no-c-format
 msgid "Place"
 msgstr "地方"
 
-#. i18n: file addactionbase.ui line 727
-#: rc.cpp:102
+#: addactionbase.ui:727
 #, no-c-format
 msgid "Parameter:"
 msgstr "參數："
 
-#. i18n: file addactionbase.ui line 976
-#: rc.cpp:105
+#: addactionbase.ui:976
 #, no-c-format
 msgid "Finishing Up"
 msgstr "結束"
 
-#. i18n: file addactionbase.ui line 992
-#: rc.cpp:108
+#: addactionbase.ui:992
 #, no-c-format
 msgid "Miscellaneous Options"
 msgstr "其他選項"
 
-#. i18n: file addactionbase.ui line 1014
-#: rc.cpp:111
+#: addactionbase.ui:1014
 #, no-c-format
 msgid "This action is &repeatable if the button is held down"
 msgstr "這個動作在按鍵持續按住的狀況下會重複執行(&R)"
 
-#. i18n: file addactionbase.ui line 1022
-#: rc.cpp:114
+#: addactionbase.ui:1022
 #, no-c-format
 msgid "This action causes the application to &start if not already running"
 msgstr "這個動作會偵測此應用程式是否已啟動。如果未啟動的話就會幫它啟動(&S)"
 
-#. i18n: file addactionbase.ui line 1058
-#: rc.cpp:117 rc.cpp:213
+#: addactionbase.ui:1058 editactionbase.ui:741
 #, no-c-format
 msgid "Multiple Instances"
 msgstr "多個實體"
 
-#. i18n: file addactionbase.ui line 1086
-#: rc.cpp:120 rc.cpp:216
+#: addactionbase.ui:1086 editactionbase.ui:769
 #, no-c-format
 msgid ""
 "This application may have multiple instances. In the case of having multiple "
@@ -394,330 +377,294 @@ msgid ""
 "action:"
 msgstr "這個應用程式可能有多個實體。請選擇您要將動作送到哪個實體："
 
-#. i18n: file addactionbase.ui line 1123
-#: rc.cpp:123 rc.cpp:219
+#: addactionbase.ui:1123 editactionbase.ui:806
 #, no-c-format
 msgid "&Ignore the action"
 msgstr "忽略此動作(&I)"
 
-#. i18n: file addactionbase.ui line 1137
-#: rc.cpp:126
+#: addactionbase.ui:1137
 #, no-c-format
 msgid "Send the action to the instance hi&ghest in the window stacking order"
 msgstr "送出動作到視窗堆疊中最高的實體(&L)"
 
-#. i18n: file addactionbase.ui line 1148
-#: rc.cpp:129 rc.cpp:225
+#: addactionbase.ui:1148 editactionbase.ui:831
 #, no-c-format
 msgid "Send the action to the instance &lowest in window stacking order"
 msgstr "送出動作到視窗堆疊中最低的實體(&L)"
 
-#. i18n: file addactionbase.ui line 1159
-#: rc.cpp:132
+#: addactionbase.ui:1159
 #, no-c-format
 msgid "Send the action to &all instances"
 msgstr "送出動作到所有的實體(&A)"
 
-#. i18n: file addactionbase.ui line 1188
-#: rc.cpp:135
+#: addactionbase.ui:1188
 #, no-c-format
 msgid "Select Required Mode Change"
 msgstr "選擇要更換的模式"
 
-#. i18n: file addactionbase.ui line 1216
-#: rc.cpp:138
+#: addactionbase.ui:1216
 #, no-c-format
 msgid "&Switch to mode:"
 msgstr "切換到模式(&S)："
 
-#. i18n: file addactionbase.ui line 1247
-#: rc.cpp:141
+#: addactionbase.ui:1247
 #, no-c-format
 msgid "Mode"
 msgstr "模式"
 
-#. i18n: file addactionbase.ui line 1295
-#: rc.cpp:144
+#: addactionbase.ui:1295
 #, no-c-format
 msgid "&Exit current mode"
 msgstr "離開目前的模式(&E)"
 
-#. i18n: file addactionbase.ui line 1323
-#: rc.cpp:147
+#: addactionbase.ui:1323
 #, no-c-format
 msgid "<b>Options</b>"
 msgstr "<b>選項</b>"
 
-#. i18n: file addactionbase.ui line 1345
-#: rc.cpp:150 rc.cpp:207
+#: addactionbase.ui:1345 editactionbase.ui:694
 #, no-c-format
 msgid "E&xecute all other actions before mode change (in original mode)"
 msgstr "在模式更換前在原模式中執行所有其他的動作(&X)"
 
-#. i18n: file addactionbase.ui line 1356
-#: rc.cpp:153 rc.cpp:210
+#: addactionbase.ui:1356 editactionbase.ui:708
 #, no-c-format
 msgid "Exec&ute all actions after mode change (in new mode)"
 msgstr "更換模式後在新模式中執行所有的動作(&U)"
 
-#. i18n: file editactionbase.ui line 16
-#: rc.cpp:156
+#: editactionbase.ui:16
 #, no-c-format
 msgid "Edit Action"
 msgstr "編輯動作"
 
-#. i18n: file editactionbase.ui line 89
-#: rc.cpp:162
+#: editactionbase.ui:89
 #, no-c-format
 msgid "O&bject:"
 msgstr "物件(&B)："
 
-#. i18n: file editactionbase.ui line 125
-#: rc.cpp:165
+#: editactionbase.ui:125
 #, no-c-format
 msgid "&Perform function:"
 msgstr "執行功能(&P)："
 
-#. i18n: file editactionbase.ui line 149
-#: rc.cpp:168
+#: editactionbase.ui:149
 #, no-c-format
 msgid "Just start application"
 msgstr "只要啟動應用程式"
 
-#. i18n: file editactionbase.ui line 162
-#: rc.cpp:171
+#: editactionbase.ui:162
 #, no-c-format
 msgid "Fu&nction:"
 msgstr "功能(&N)："
 
-#. i18n: file editactionbase.ui line 173
-#: rc.cpp:174
+#: editactionbase.ui:173
 #, no-c-format
 msgid "&Application:"
 msgstr "應用程式(&A)："
 
-#. i18n: file editactionbase.ui line 205
-#: rc.cpp:177
+#: editactionbase.ui:205
 #, no-c-format
 msgid "&Use application:"
 msgstr "使用應用程式(&U)："
 
-#. i18n: file editactionbase.ui line 219
-#: rc.cpp:180
+#: editactionbase.ui:219
 #, no-c-format
 msgid "App&lication:"
 msgstr "應用程式(&L)："
 
-#. i18n: file editactionbase.ui line 230
-#: rc.cpp:183
+#: editactionbase.ui:230
 #, no-c-format
 msgid "Use &DCOP:"
 msgstr "使用 DCOP(&D)："
 
-#. i18n: file editactionbase.ui line 518
-#: rc.cpp:186
+#: editactionbase.ui:518
 #, no-c-format
 msgid "A&pplication/DCOP options:"
 msgstr "應用程式/DCOP 選項(&P)："
 
-#. i18n: file editactionbase.ui line 556
-#: rc.cpp:189
+#: editactionbase.ui:556
 #, no-c-format
 msgid "Change &mode to:"
 msgstr "更換模式到(&M)："
 
-#. i18n: file editactionbase.ui line 614
-#: rc.cpp:195
+#: editactionbase.ui:614
 #, no-c-format
 msgid "<b>DCOP/Application Action Options</b>"
 msgstr "<b>DCOP/應用程式動作選項</b>"
 
-#. i18n: file editactionbase.ui line 636
-#: rc.cpp:198
+#: editactionbase.ui:636
 #, no-c-format
 msgid "&Action repeats if button is held down"
 msgstr "按鍵按住的話就重複動作(&A)"
 
-#. i18n: file editactionbase.ui line 644
-#: rc.cpp:201
+#: editactionbase.ui:644
 #, no-c-format
 msgid "&Start program/service if not already running"
 msgstr "如果未執行的話就啟動程式或服務(&S)"
 
-#. i18n: file editactionbase.ui line 669
-#: rc.cpp:204
+#: editactionbase.ui:669
 #, no-c-format
 msgid "<b>Mode Change Options</b>"
 msgstr "<b>模式更換選項</b>"
 
-#. i18n: file editactionbase.ui line 820
-#: rc.cpp:222
+#: editactionbase.ui:820
 #, no-c-format
 msgid "Send the action to the instance hi&ghest in window stacking order"
 msgstr "送出此動作到視窗堆疊中最高的實體(&G)"
 
-#. i18n: file editactionbase.ui line 842
-#: rc.cpp:228
+#: editactionbase.ui:842
 #, no-c-format
 msgid "Send the action to all i&nstances"
 msgstr "送出所有實體的動作(&N)"
 
-#. i18n: file editactionbase.ui line 889
-#: rc.cpp:234
+#: editactionbase.ui:886
+#, no-c-format
+msgid "&Help"
+msgstr ""
+
+#: editactionbase.ui:889
 #, no-c-format
 msgid "F1"
 msgstr "F1"
 
-#. i18n: file editmodebase.ui line 16
-#: rc.cpp:243
+#: editactionbase.ui:917 editmodebase.ui:246 newmode.ui:111 selectprofile.ui:88
+#, no-c-format
+msgid "&OK"
+msgstr ""
+
+#: editactionbase.ui:931 editmodebase.ui:254 newmode.ui:119 selectprofile.ui:99
+#, no-c-format
+msgid "&Cancel"
+msgstr ""
+
+#: editmodebase.ui:16
 #, no-c-format
 msgid "Edit Mode"
 msgstr "編輯模式"
 
-#. i18n: file editmodebase.ui line 27
-#: rc.cpp:246
+#: editmodebase.ui:27
 #, no-c-format
 msgid "<b>Description</b>"
 msgstr "<b>描述</b>"
 
-#. i18n: file editmodebase.ui line 57
-#: rc.cpp:249
+#: editmodebase.ui:57
 #, no-c-format
 msgid "&Icon for system tray:"
 msgstr "系統匣圖示(&I)："
 
-#. i18n: file editmodebase.ui line 130
-#: rc.cpp:252
+#: editmodebase.ui:130
 #, no-c-format
 msgid "&Mode name:"
 msgstr "模式名稱(&M)："
 
-#. i18n: file editmodebase.ui line 160
-#: rc.cpp:255
+#: editmodebase.ui:160
 #, no-c-format
 msgid "<b>Behavior</b>"
 msgstr "<b>行為</b>"
 
-#. i18n: file editmodebase.ui line 182
-#: rc.cpp:258
+#: editmodebase.ui:182
 #, no-c-format
 msgid "Mo&de is the default for its remote control"
 msgstr "Mode 為它的遙控預設模式。"
 
-#. i18n: file kcmlircbase.ui line 17
-#: rc.cpp:267
+#: kcmlircbase.ui:17
 #, no-c-format
 msgid "Linux Infrared Remote Control"
 msgstr "Linux 紅外線遙控"
 
-#. i18n: file kcmlircbase.ui line 38
-#: rc.cpp:270
+#: kcmlircbase.ui:38
 #, no-c-format
 msgid "Controller Functions"
 msgstr "控制功能"
 
-#. i18n: file kcmlircbase.ui line 75
-#: rc.cpp:273
+#: kcmlircbase.ui:75
 #, no-c-format
 msgid ""
 "There are currently no remote controls available. You must first set up LIRC "
 "correctly; see www.lirc.org for more information."
 msgstr "目前沒有遙控系統。您必須先設定 LIRC，請參考 www.lirc.org 的說明。"
 
-#. i18n: file kcmlircbase.ui line 104
-#: rc.cpp:276
+#: kcmlircbase.ui:104
 #, no-c-format
 msgid "Remote controls and modes:"
 msgstr "遙控鍵與模式："
 
-#. i18n: file kcmlircbase.ui line 110
-#: rc.cpp:279 rc.cpp:282
+#: kcmlircbase.ui:110 kcmlircbase.ui:121
 #, no-c-format
 msgid "New Column"
 msgstr "新欄位"
 
-#. i18n: file kcmlircbase.ui line 176
-#: rc.cpp:285
+#: kcmlircbase.ui:176
 #, no-c-format
 msgid "&Add..."
 msgstr "新增(&A)..."
 
-#. i18n: file kcmlircbase.ui line 187
-#: rc.cpp:288
+#: kcmlircbase.ui:187
 #, no-c-format
 msgid "&Edit..."
 msgstr "編輯(&E)..."
 
-#. i18n: file kcmlircbase.ui line 271
-#: rc.cpp:306
+#: kcmlircbase.ui:198
+#, fuzzy, no-c-format
+msgid "&Remove"
+msgstr "移除(&M)"
+
+#: kcmlircbase.ui:271
 #, no-c-format
 msgid "Notes"
 msgstr "備註"
 
-#. i18n: file kcmlircbase.ui line 342
-#: rc.cpp:309
+#: kcmlircbase.ui:342
 #, no-c-format
 msgid "Auto-Populate..."
 msgstr "自動分配..."
 
-#. i18n: file kcmlircbase.ui line 356
-#: rc.cpp:312
+#: kcmlircbase.ui:356
 #, no-c-format
 msgid "A&dd..."
 msgstr "新增(&D)..."
 
-#. i18n: file kcmlircbase.ui line 367
-#: rc.cpp:315
+#: kcmlircbase.ui:367
 #, no-c-format
 msgid "Ed&it..."
 msgstr "編輯(&I)..."
 
-#. i18n: file kcmlircbase.ui line 378
-#: rc.cpp:318
+#: kcmlircbase.ui:378
 #, no-c-format
 msgid "Re&move"
 msgstr "移除(&M)"
 
-#. i18n: file kcmlircbase.ui line 395
-#: rc.cpp:321
+#: kcmlircbase.ui:395
 #, no-c-format
 msgid "Loaded Extensions"
 msgstr "載入的延伸程式"
 
-#. i18n: file kcmlircbase.ui line 411
-#: rc.cpp:324 rc.cpp:327
+#: kcmlircbase.ui:411 kcmlircbase.ui:452
 #, no-c-format
 msgid "Name"
 msgstr "名稱"
 
-#. i18n: file newmode.ui line 16
-#: rc.cpp:333
+#: kcmlircbase.ui:463
+#, fuzzy, no-c-format
+msgid "Information"
+msgstr "忽略此動作(&I)"
+
+#: newmode.ui:16
 #, no-c-format
 msgid "New Mode"
 msgstr "新模式"
 
-#. i18n: file newmode.ui line 54
-#: rc.cpp:339
+#: newmode.ui:54
 #, no-c-format
 msgid "Name:"
 msgstr "名稱："
 
-#. i18n: file selectprofile.ui line 16
-#: rc.cpp:348
+#: selectprofile.ui:16
 #, no-c-format
 msgid "Select Profile to Add"
 msgstr "選擇要加入的設定檔"
 
-#. i18n: file selectprofile.ui line 25
-#: rc.cpp:351
+#: selectprofile.ui:25
 #, no-c-format
 msgid "Profile Name"
 msgstr "設定檔名稱"
-
-#: kcmlircbase.ui.h:27
-msgid "Remote Control"
-msgstr "遙控"
-
-#: kcmlircbase.ui.h:29
-msgid "Icon"
-msgstr "圖示"