Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

(cherry picked from commit d7880955df02fdec515d26c93acd13ae25bc5554)

1 files changed, 127 insertions, 117 deletions

diff --git a/tde-i18n-zh_TW/messages/tdemultimedia/krec.po b/tde-i18n-zh_TW/messages/tdemultimedia/krec.po
index be88de79385..8562d0a2e78 100644
--- a/tde-i18n-zh_TW/messages/tdemultimedia/krec.po
+++ b/tde-i18n-zh_TW/messages/tdemultimedia/krec.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: krec\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-17 02:58+0100\n"
 "PO-Revision-Date: 2006-02-21 13:12+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -19,73 +19,13 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.10.2\n"
 
-#: mp3_export/krecexport_mp3.cpp:34
-msgid "Unknown encoding error."
-msgstr "未知的編碼錯誤。"
-
-#: mp3_export/krecexport_mp3.cpp:35
-msgid "Buffer was too small."
-msgstr "暫存器太小。"
-
-#: mp3_export/krecexport_mp3.cpp:36
-msgid "Memory allocation problem."
-msgstr "配置記憶體錯誤。"
-
-#: mp3_export/krecexport_mp3.cpp:37
-msgid "Parameter initialisation not performed."
-msgstr "參數未初始化。"
-
-#: mp3_export/krecexport_mp3.cpp:38
-msgid "Psycho acoustic problems."
-msgstr "Psycho acoustic 問題。"
-
-#: mp3_export/krecexport_mp3.cpp:39
-msgid "OGG cleanup encoding error."
-msgstr "OGG 清除編碼錯誤。"
-
-#: mp3_export/krecexport_mp3.cpp:40
-msgid "OGG frame encoding error"
-msgstr "OGG frame 編碼錯誤"
-
-#: mp3_export/krecexport_mp3.cpp:78
-msgid "At this time MP3-Export only supports files in stereo and 16bit."
-msgstr "目前 MP3 匯出只支援立體聲與十六位元音效檔。"
-
-#: mp3_export/krecexport_mp3.cpp:83
-msgid ""
-"Please note that this plugin takes its qualitysettings from the corresponding "
-"section of the Audio CDs Control Center module configuration. Make use of the "
-"Control Center to configure these settings."
-msgstr "請注意，這個外掛程式是從 Audio CD 控制中心模組設定中取得音效的品質設定。請到控制中心去設定這些值。"
-
-#: mp3_export/krecexport_mp3.cpp:87 ogg_export/krecexport_ogg.cpp:78
-msgid "Quality Configuration"
-msgstr "品質設定"
-
-#: mp3_export/krecexport_mp3.cpp:127 mp3_export/krecexport_mp3.cpp:144
-msgid "MP3 encoding error."
-msgstr "MP3 編碼錯誤。"
-
-#: ogg_export/krecexport_ogg.cpp:69
-msgid ""
-"At this time OGG-export only supports files in 44kHz samplingrate, 16bit and 2 "
-"channels."
-msgstr "此時 OGG 匯出只支援取樣頻率為 44 千赫，十六位元及雙聲道的檔案。"
-
-#: ogg_export/krecexport_ogg.cpp:75
-msgid ""
-"Please note that this plugin takes its qualitysettings from the corresponding "
-"section of the audiocd:/ configuration. Make use of the Control Center to "
-"configure these settings."
-msgstr "請注意，這個外掛程式是從 audiocd:/ 設定中取得音效的品質設定。請到控制中心去設定這些值。"
-
-#: _translatorinfo.cpp:1
+#: _translatorinfo:1
 msgid ""
 "_: NAME OF TRANSLATORS\n"
 "Your names"
 msgstr "Tse-Chun Ho, Frank Weng (a.k.a. Franklin)"
 
-#: _translatorinfo.cpp:3
+#: _translatorinfo:2
 msgid ""
 "_: EMAIL OF TRANSLATORS\n"
 "Your emails"
@@ -205,8 +145,8 @@ msgstr "將所有隱藏的訊息重新打開"
 
 #: krecconfigure.cpp:94
 msgid ""
-"<qt><i>All messages with the \"Don't show this message again\" option are shown "
-"again after selecting this button.</i></qt>"
+"<qt><i>All messages with the \"Don't show this message again\" option are "
+"shown again after selecting this button.</i></qt>"
 msgstr "<qt><i>將之前所有設定「不要再顯示」的訊息通通解禁。</i></qt>"
 
 #: krecfile.cpp:56
@@ -375,21 +315,18 @@ msgstr "抱歉，無法決定編碼方法。"
 
 #: krecord.cpp:173
 msgid ""
-"<qt>This can have several reasons:"
-"<ul>"
-"<li>You did not specify an ending.</li>"
-"<li>You specified an ending but there is no plugin available for this ending. "
-"In both cases be sure to choose an ending of the list presented in the previous "
-"dialog.</li>"
-"<li>The plugin loading mechanism isn't working. If you are sure you did "
-"everything right, please file a bugreport saying what you where about to do and "
-"please quote the following line:<br />%1</li></ul></qt>"
+"<qt>This can have several reasons:<ul><li>You did not specify an ending.</"
+"li><li>You specified an ending but there is no plugin available for this "
+"ending. In both cases be sure to choose an ending of the list presented in "
+"the previous dialog.</li><li>The plugin loading mechanism isn't working. If "
+"you are sure you did everything right, please file a bugreport saying what "
+"you where about to do and please quote the following line:<br />%1</li></"
+"ul></qt>"
 msgstr ""
-"<qt>這有幾個理由： "
-"<ul> "
-"<li>您沒有指定結束（ending）。</li> "
-"<li>您指定了結束，但沒有此結束的外掛。請確認您已從之前的清單中選取了結束。</li> "
-"<li>外掛載入時有問題。如果您確定您每一步驟都沒有弄錯，請回報錯誤，說明您所做的動作，並加入下一行：<br /> %1 </li></ul></qt>"
+"<qt>這有幾個理由： <ul> <li>您沒有指定結束（ending）。</li> <li>您指定了結"
+"束，但沒有此結束的外掛。請確認您已從之前的清單中選取了結束。</li> <li>外掛載"
+"入時有問題。如果您確定您每一步驟都沒有弄錯，請回報錯誤，說明您所做的動作，並"
+"加入下一行：<br /> %1 </li></ul></qt>"
 
 #: krecord.cpp:183
 msgid "Could not determine encodingmethod"
@@ -407,8 +344,7 @@ msgstr "匯出..."
 msgid "&Record"
 msgstr "錄音(&R)"
 
-#. i18n: file krecui.rc line 8
-#: krecord.cpp:302 rc.cpp:3
+#: krecord.cpp:302 krecui.rc:8
 #, no-c-format
 msgid "&Play"
 msgstr "播放(&P)"
@@ -440,7 +376,8 @@ msgstr "啟動 KMix"
 #: krecord.cpp:342
 msgid ""
 "Your system is missing the Synth_STEREO_COMPRESSOR aRts module.\n"
-"You will be able to use KRec but without the great functions of the compressor."
+"You will be able to use KRec but without the great functions of the "
+"compressor."
 msgstr ""
 "您的系統沒有 Synth_STEREO_COMPRESSOR aRts 模組。\n"
 "您可以使用 KRec 但是會沒辦法使用壓縮的功能。"
@@ -501,80 +438,153 @@ msgid ""
 "patches."
 msgstr "他們間接寫出匯出程式。至少是我從他們寫的檔案與補丁學來的。"
 
-#. i18n: file krecui.rc line 35
-#: rc.cpp:9
+#: mp3_export/krecexport_mp3.cpp:34
+msgid "Unknown encoding error."
+msgstr "未知的編碼錯誤。"
+
+#: mp3_export/krecexport_mp3.cpp:35
+msgid "Buffer was too small."
+msgstr "暫存器太小。"
+
+#: mp3_export/krecexport_mp3.cpp:36
+msgid "Memory allocation problem."
+msgstr "配置記憶體錯誤。"
+
+#: mp3_export/krecexport_mp3.cpp:37
+msgid "Parameter initialisation not performed."
+msgstr "參數未初始化。"
+
+#: mp3_export/krecexport_mp3.cpp:38
+msgid "Psycho acoustic problems."
+msgstr "Psycho acoustic 問題。"
+
+#: mp3_export/krecexport_mp3.cpp:39
+msgid "OGG cleanup encoding error."
+msgstr "OGG 清除編碼錯誤。"
+
+#: mp3_export/krecexport_mp3.cpp:40
+msgid "OGG frame encoding error"
+msgstr "OGG frame 編碼錯誤"
+
+#: mp3_export/krecexport_mp3.cpp:78
+msgid "At this time MP3-Export only supports files in stereo and 16bit."
+msgstr "目前 MP3 匯出只支援立體聲與十六位元音效檔。"
+
+#: mp3_export/krecexport_mp3.cpp:83
+msgid ""
+"Please note that this plugin takes its qualitysettings from the "
+"corresponding section of the Audio CDs Control Center module configuration. "
+"Make use of the Control Center to configure these settings."
+msgstr ""
+"請注意，這個外掛程式是從 Audio CD 控制中心模組設定中取得音效的品質設定。請到"
+"控制中心去設定這些值。"
+
+#: mp3_export/krecexport_mp3.cpp:87 ogg_export/krecexport_ogg.cpp:78
+msgid "Quality Configuration"
+msgstr "品質設定"
+
+#: mp3_export/krecexport_mp3.cpp:127 mp3_export/krecexport_mp3.cpp:144
+msgid "MP3 encoding error."
+msgstr "MP3 編碼錯誤。"
+
+#: ogg_export/krecexport_ogg.cpp:69
+msgid ""
+"At this time OGG-export only supports files in 44kHz samplingrate, 16bit and "
+"2 channels."
+msgstr "此時 OGG 匯出只支援取樣頻率為 44 千赫，十六位元及雙聲道的檔案。"
+
+#: ogg_export/krecexport_ogg.cpp:75
+msgid ""
+"Please note that this plugin takes its qualitysettings from the "
+"corresponding section of the audiocd:/ configuration. Make use of the "
+"Control Center to configure these settings."
+msgstr ""
+"請注意，這個外掛程式是從 audiocd:/ 設定中取得音效的品質設定。請到控制中心去設"
+"定這些值。"
+
+#: krecui.rc:28
+#, no-c-format
+msgid "Main Toolbar"
+msgstr ""
+
+#: krecui.rc:35
 #, no-c-format
 msgid "Play"
 msgstr "播放"
 
-#. i18n: file krecui.rc line 43
-#: rc.cpp:12
+#: krecui.rc:43
 #, no-c-format
 msgid "Compressor"
 msgstr "壓縮程式"
 
-#: tips.txt:3
+#: tips:3
 msgid ""
 "<h4>...that KRec does non-destructive Recording?</h4>\n"
 "<p>\n"
-"That means if you have a recording and want to record only a part for a second "
-"(third or more) time, your first (and second and later) version is still on "
-"disc and can still be restored. Only for Playback/Export the old version is "
-"overlayed by the newer one.\n"
+"That means if you have a recording and want to record only a part for a "
+"second (third or more) time, your first (and second and later) version is "
+"still on disc and can still be restored. Only for Playback/Export the old "
+"version is overlayed by the newer one.\n"
 "</p>\n"
 msgstr ""
 "<h4>KRec 可以做錄音回覆嗎？</h4>\n"
-"<p>這是指說，如果您已經有一段錄音，然後在其中一部份要錄第二次（或更多次），您第一次錄的音並不會被清掉，隨時可以回復。只有播放/匯出時，舊的錄音會被新的蓋過去"
-"。</p>\n"
+"<p>這是指說，如果您已經有一段錄音，然後在其中一部份要錄第二次（或更多次），您"
+"第一次錄的音並不會被清掉，隨時可以回復。只有播放/匯出時，舊的錄音會被新的蓋過"
+"去。</p>\n"
 
-#: tips.txt:11
+#: tips:12
 msgid ""
 "<h4>...which event caused the first version of KRec?</h4>\n"
 "<p>\n"
-"Some friends of mine asked me whether I could do the recordings for a radioplay "
-"for them. So I was searching for an easy-to-use recording tool running on my "
-"favorite OS. After some searching (without finding something suitable) I "
-"started a first version of KRec.\n"
+"Some friends of mine asked me whether I could do the recordings for a "
+"radioplay for them. So I was searching for an easy-to-use recording tool "
+"running on my favorite OS. After some searching (without finding something "
+"suitable) I started a first version of KRec.\n"
 "</p>\n"
 msgstr ""
 "<h4>第一版的 KRec 是怎麼來的？</h4> \n"
-"<p>一些朋友問我是不是能錄下收音機裡的音樂。所以我去搜尋在我的作業系統上好用的錄音工具。找了一陣之後，我決定自己來寫第一版的 KRec。</p>\n"
+"<p>一些朋友問我是不是能錄下收音機裡的音樂。所以我去搜尋在我的作業系統上好用的"
+"錄音工具。找了一陣之後，我決定自己來寫第一版的 KRec。</p>\n"
 
-#: tips.txt:19
+#: tips:21
 msgid ""
 "<h4>...that developers are very happy to hear from the users?</h4>\n"
 "<p>\n"
-"Most developers are very happy to see their applications used by other people. "
-"So if you want to say \"Thank you\" or you have some problems, don't hesitate "
-"to mail us/me. You can find the email addresses of the author in the "
-"\"Help\"-menu under \"About KRec\".\n"
+"Most developers are very happy to see their applications used by other "
+"people. So if you want to say \"Thank you\" or you have some problems, don't "
+"hesitate to mail us/me. You can find the email addresses of the author in "
+"the \"Help\"-menu under \"About KRec\".\n"
 "</p>\n"
 msgstr ""
 "<h4>程式開發者總是喜歡從使用者那裡得到回饋。</h4>\n"
-"<p> 大部份的程式開發者都希望他們寫的應用程式能被使用者廣泛使用。所以如果您想向他們說聲「謝謝」，或是您有些問題，請寫信給我們。您可以在「關於 "
-"KRec」的「說明」中找到作者的電子郵件地址。</p>\n"
+"<p> 大部份的程式開發者都希望他們寫的應用程式能被使用者廣泛使用。所以如果您想"
+"向他們說聲「謝謝」，或是您有些問題，請寫信給我們。您可以在「關於 KRec」的「說"
+"明」中找到作者的電子郵件地址。</p>\n"
 
-#: tips.txt:27
+#: tips:30
 msgid ""
 "<h4>...that you are invited to report bugs?</h4>\n"
 "<p>\n"
-"Altough a lot of testing is done, our capabilities of catching every possible "
-"event/configuration are limited. So if you find a bug use \"Report Bug\" in the "
-"\"Help\"-menu or go directly to http://bugs.trinitydesktop.org.\n"
+"Altough a lot of testing is done, our capabilities of catching every "
+"possible event/configuration are limited. So if you find a bug use \"Report "
+"Bug\" in the \"Help\"-menu or go directly to http://bugs.trinitydesktop."
+"org.\n"
 "</p>\n"
 msgstr ""
 "<h4>您能回報錯誤給我們。</h4>\n"
-"<p> 雖然已經做過很多的測試，但是還是很有限。所以如果您找到問題，請用「說明」中的「報告問題」，或是直接到 http://bugs.trinitydesktop.org "
-"去回報問題。</p>\n"
+"<p> 雖然已經做過很多的測試，但是還是很有限。所以如果您找到問題，請用「說明」"
+"中的「報告問題」，或是直接到 http://bugs.trinitydesktop.org 去回報問題。</"
+"p>\n"
 
-#: tips.txt:35
+#: tips:39
 msgid ""
 "<h4>...that KRec is far from complete?</h4>\n"
 "<p>\n"
-"So if you have a nice feature you think KRec should incorporate please tell us! "
-"To avoid duplicates and improve productivity please do it via bugs.trinitydesktop.org or "
-"the bug reporting tools and us wishlist as severity.\n"
+"So if you have a nice feature you think KRec should incorporate please tell "
+"us! To avoid duplicates and improve productivity please do it via bugs."
+"trinitydesktop.org or the bug reporting tools and us wishlist as severity.\n"
 "</p>\n"
 msgstr ""
 "<h4>KRec 還沒完成。</h4>\n"
-"<p> 所以如果您對 KRec 有任何意見與好點子，請告訴我們。要避免與別人回報的意見重複，請透過 bugs.trinitydesktop.org 或回報錯誤的工具。</p>\n"
+"<p> 所以如果您對 KRec 有任何意見與好點子，請告訴我們。要避免與別人回報的意見"
+"重複，請透過 bugs.trinitydesktop.org 或回報錯誤的工具。</p>\n"