Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: tdeutils/kcmlaptop
Translate-URL: https://mirror.git.trinitydesktop.org/weblate/projects/tdeutils/kcmlaptop/
(cherry picked from commit f952c65dd52514e68d6569a0823d6c2d833ae367)

1 files changed, 568 insertions, 517 deletions

diff --git a/tde-i18n-zh_TW/messages/tdeutils/kcmlaptop.po b/tde-i18n-zh_TW/messages/tdeutils/kcmlaptop.po
index 2abb24fd48e..e5fedb1f5c7 100644
--- a/tde-i18n-zh_TW/messages/tdeutils/kcmlaptop.po
+++ b/tde-i18n-zh_TW/messages/tdeutils/kcmlaptop.po
@@ -3,7 +3,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmlaptop\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-25 18:26+0100\n"
 "PO-Revision-Date: 2006-10-16 12:51+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -14,6 +14,257 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.4\n"
 
+#: _translatorinfo:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo:2
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: acpi.cpp:64
+msgid ""
+"This panel provides information about your system's ACPI implementation and "
+"lets you have access to some of the extra features provided by ACPI"
+msgstr ""
+"這個面板提供關於您電腦的 ACPI 資訊，並讓您調整 ACPI 提供的一些額外功能。"
+
+#: acpi.cpp:69
+msgid ""
+"NOTE: the Linux ACPI implementation is still a 'work in progress'. Some "
+"features, in particular suspend and hibernate are not yet available under "
+"2.4 - and under 2.5 some particular ACPI implementations are still unstable, "
+"these check boxes let you only enable the things that work reliably. You "
+"should test these features very gingerly - save all your work, check them on "
+"and try a suspend/standby/hibernate from the popup menu on the battery icon "
+"in the panel if it fails to come back successfully uncheck the box again."
+msgstr ""
+"注意：Linux ACPI 實作還在實驗中。有些功能，特別是暫停(suspend)與冬眠"
+"(hibernate)在 2.4 版核心中尚未支援。另外在 2.5 版核心中某些版本的 ACPI 還不穩"
+"定，這裡只讓您開啟部份穩定的功能選項。您必須非常小心的測試這些功能─儲存好您的"
+"工作，再試試從電池面板圖示的目錄中開啟暫停/待命/冬眠等功能。如果有問題的話，"
+"取消這些功能。"
+
+#: acpi.cpp:79 apm.cpp:77
+msgid ""
+"Some changes made on this page may require you to quit the laptop panel and "
+"start it again to take effect"
+msgstr "您改變的部份設定需要請您先離開面板並重新啟動。"
+
+#: acpi.cpp:85 apm.cpp:83
+msgid "Enable standby"
+msgstr "開啟待命狀態"
+
+#: acpi.cpp:87 apm.cpp:85
+msgid ""
+"If checked this box enables transitions to the 'standby' state - a temporary "
+"powered down state"
+msgstr "開啟這個選項讓系統可以切入待命(standby)的狀態。"
+
+#: acpi.cpp:91 apm.cpp:89
+msgid "Enable &suspend"
+msgstr "開啟暫停狀態(&S)"
+
+#: acpi.cpp:93 apm.cpp:91
+msgid ""
+"If checked this box enables transitions to the 'suspend' state - a semi-"
+"powered down state, sometimes called 'suspend-to-ram'"
+msgstr "開啟這個選項讓系統可以切入暫停(suspend)的狀態。"
+
+#: acpi.cpp:98
+msgid "Enable &hibernate"
+msgstr "開啟冬眠狀態(&H)"
+
+#: acpi.cpp:100
+msgid ""
+"If checked this box enables transitions to the 'hibernate' state - a powered "
+"down state, sometimes called 'suspend-to-disk'"
+msgstr "開啟這個選項讓系統可以切入冬眠(hibernate)的狀態。"
+
+#: acpi.cpp:105
+msgid "Use software suspend for hibernate"
+msgstr "使用軟體暫停(software suspend)來執行冬眠功能"
+
+#: acpi.cpp:107
+msgid ""
+"If checked this box enables transitions to the 'hibernate' state - a powered "
+"down state, sometimes called 'suspend-to-disk' - the kernel 'Software "
+"Suspend' mechanism will be used instead of using ACPI directly"
+msgstr ""
+"開啟這個選項的話，會用核心中的「軟體暫停」(Software Suspend)機制而不用 ACPI "
+"的控制來執行冬眠狀態。"
+
+#: acpi.cpp:117
+msgid "Enable &performance profiles"
+msgstr "開啟效能設定(&P)"
+
+#: acpi.cpp:119
+msgid ""
+"If checked this box enables access to ACPI performance profiles - usually OK "
+"in 2.4 and later"
+msgstr ""
+"開啟這個選項以便設定 ACPI 效能設定。通常在 2.4 版以後的核心都可以使用。"
+
+#: acpi.cpp:123
+msgid "Enable &CPU throttling"
+msgstr "開啟 CPU 效能上限(&C)"
+
+#: acpi.cpp:125
+msgid ""
+"If checked this box enables access to ACPI throttle speed changes - usually "
+"OK in 2.4 and later"
+msgstr ""
+"開啟這個選項以便設定 ACPI 對 CPU 效能上限的控制。通常在 2.4 版以後的核心都可"
+"以使用。"
+
+#: acpi.cpp:129
+msgid ""
+"If the above boxes are disabled then there is no 'helper' application set up "
+"to help change ACPI states, there are two ways you can enable this "
+"application, either make the file /proc/acpi/sleep writeable by anyone every "
+"time your system boots or use the button below to make the TDE ACPI helper "
+"application set-uid root"
+msgstr ""
+"如果以上的選項都關閉，則沒有其他應用程式可以改變 ACPI 狀態。這種狀況下有兩個"
+"方法，一個是在開機時將 /proc/acpi/sleep 檔設定為所有人都可以讀寫，或是用底下"
+"的按鈕將 TDE ACPI 設定程式設為 set-uid root。"
+
+#: acpi.cpp:138 apm.cpp:107
+msgid "Setup Helper Application"
+msgstr "設定 ACPI 設定應用程式"
+
+#: acpi.cpp:140
+msgid "This button can be used to enable the ACPI helper application"
+msgstr "這個按鈕可以開啟 ACPI 設定應用程式"
+
+#: acpi.cpp:148 apm.cpp:144 buttons.cpp:281 power.cpp:320 profile.cpp:216
+#: sony.cpp:102 warning.cpp:291
+#, c-format
+msgid "Version: %1"
+msgstr "版本：%1"
+
+#: acpi.cpp:172 apm.cpp:194
+msgid ""
+"You will need to supply a root password to allow the privileges of the "
+"klaptop_acpi_helper to change."
+msgstr "您需要輸入 root 的密碼。"
+
+#: acpi.cpp:174 acpi.cpp:186 apm.cpp:174 apm.cpp:196 apm.cpp:208 sony.cpp:115
+#: sony.cpp:127
+msgid "KLaptopDaemon"
+msgstr "KLaptopDaemon"
+
+#: acpi.cpp:185
+msgid ""
+"The ACPI helper cannot be enabled because tdesu cannot be found.  Please "
+"make sure that it is installed correctly."
+msgstr ""
+"ACPI 設定程式無法開啟，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
+
+#: acpi.cpp:268
+msgid ""
+"<h1>ACPI Setup</h1>This module allows you to configure ACPI for your system"
+msgstr "<h1>設定 ACPI</h1>這個模組可以讓您控制電腦的 ACPI 設定。"
+
+#: apm.cpp:64
+msgid ""
+"This panel lets you configure your APM system and lets you have access to "
+"some of the extra features provided by it"
+msgstr "這個面板讓您設定您的 APM 系統，並讓您能存取它提供的額外功能。"
+
+#: apm.cpp:69
+msgid ""
+"NOTE: some APM implementations have buggy suspend/standby implementations. "
+"You should test these features very gingerly - save all your work, check "
+"them on and try a suspend/standby from the popup menu on the battery icon in "
+"the panel if it fails to come back successfully uncheck the box again."
+msgstr ""
+"注意：有些 APM 實作暫停/待命狀態時是有問題的。您必須非常小心的測試這些功能─儲"
+"存好您的工作，再試試從電池圖示的目錄中開啟暫停/待命功能。"
+
+#: apm.cpp:98
+msgid ""
+"If the above boxes are disabled then there is no 'helper' application set up "
+"to help change APM states, there are two ways you can enable this "
+"application, either make the file /proc/apm writeable by anyone every time "
+"your system boots or use the button below to make the %1 application set-uid "
+"root"
+msgstr ""
+"如果以上的選項都關閉，則沒有其他應用程式可以改變 APM 狀態。這種狀況下有兩個方"
+"法，一個是在開機時將 /proc/apm 檔設定為所有人都可以讀寫，或是用底下的按鈕將 "
+"%1 程式設為 set-uid root。"
+
+#: apm.cpp:109
+msgid "This button can be used to enable the APM helper application"
+msgstr "這個按鈕可以開啟 APM 設定應用程式"
+
+#: apm.cpp:114
+msgid ""
+"Your system seems to have 'Software Suspend' installed, this can be used to "
+"hibernate or 'suspend to disk' your system if you want to use this for "
+"hibernation check the box below"
+msgstr ""
+"您的系統上有安裝軟體暫停功能，您可以勾選來使用它讓系統進入冬眠(hibernate)狀"
+"態。"
+
+#: apm.cpp:119
+msgid "Enable software suspend for hibernate"
+msgstr "冬眠時使用軟體暫停模式"
+
+#: apm.cpp:121
+msgid ""
+"If checked this box enables transitions to the 'hibernate' state using the "
+"'Software Suspend' mechanism"
+msgstr "開啟這個選項的話，會使用軟體暫停(Software Suspend)來進入冬眠模式。"
+
+#: apm.cpp:124
+msgid ""
+"If the above box is disabled then you need to be logged in as root or need a "
+"helper application to invoke the Software Suspend utility - TDE provides a "
+"utility to do this, if you wish to use it you must make it set-uid root, the "
+"button below will do this for you"
+msgstr ""
+"如果關閉以上的選項，您需要登入為 root 或一支可以叫出軟體暫停功能的程式。TDE "
+"有提供這樣的功能，如果您要使用 TDE 提供的功能，您必須將它設定為 setuid root。"
+"底下的按鈕可以提供您更改其權限。"
+
+#: apm.cpp:132
+msgid "Setup SS Helper Application"
+msgstr "設定軟體暫停應用程式"
+
+#: apm.cpp:134
+msgid ""
+"This button can be used to enable the Software Suspend helper application"
+msgstr "這個按鈕可以開啟軟體暫停設定程式。"
+
+#: apm.cpp:160
+msgid ""
+"You will need to supply a root password to allow the privileges of the %1 "
+"application to change."
+msgstr "您需要 root 密碼才能改變 %1 的權限。"
+
+#: apm.cpp:173
+msgid ""
+"%1 cannot be enabled because tdesu cannot be found.  Please make sure that "
+"it is installed correctly."
+msgstr "%1 無法開啟，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
+
+#: apm.cpp:207
+msgid ""
+"The Software Suspend helper cannot be enabled because tdesu cannot be "
+"found.  Please make sure that it is installed correctly."
+msgstr ""
+"無法開啟軟體暫停設定，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
+
+#: apm.cpp:271
+msgid ""
+"<h1>APM Setup</h1>This module allows you to configure APM for your system"
+msgstr "<h1>APM 設定</h1>這個模組讓您設定 APM。"
+
 #: battery.cpp:72
 msgid "&Show battery monitor"
 msgstr "顯示電池監控器(&S)"
@@ -28,8 +279,8 @@ msgstr "顯示電池電量百分比"
 
 #: battery.cpp:81
 msgid ""
-"This box enables a text message near the battery state icon containing battery "
-"level percentage"
+"This box enables a text message near the battery state icon containing "
+"battery level percentage"
 msgstr "開啟這個選項的話，會在面板中的電池圖示附近顯示的電量的百分比。"
 
 #: battery.cpp:84
@@ -97,14 +348,18 @@ msgid ""
 "<h1>Laptop Battery</h1>This module allows you to monitor your batteries. To "
 "make use of this module, you must have power management system software "
 "installed. (And, of course, you should have batteries in your machine.)"
-msgstr "<h1>電池監視器</h1>這個模組可以讓您監視電池。要使用這個模組，您必須安裝電源管理系統的軟體。當然，您的機器內必須安裝電池。"
+msgstr ""
+"<h1>電池監視器</h1>這個模組可以讓您監視電池。要使用這個模組，您必須安裝電源管"
+"理系統的軟體。當然，您的機器內必須安裝電池。"
 
 #: battery.cpp:286
 msgid ""
 "<qt>The battery monitor has been started, but the tray icon is currently "
-"disabled.  You can make it appear by selecting the <b>Show battery monitor</b> "
-"entry on this page and applying your changes.</qt>"
-msgstr "<qt>電池監視器已經開始，但目前系統匣圖示是關閉的。您可以用<b>顯示電池監視器</b>來開啟系統匣圖示。</qt>"
+"disabled.  You can make it appear by selecting the <b>Show battery monitor</"
+"b> entry on this page and applying your changes.</qt>"
+msgstr ""
+"<qt>電池監視器已經開始，但目前系統匣圖示是關閉的。您可以用<b>顯示電池監視器</"
+"b>來開啟系統匣圖示。</qt>"
 
 #: battery.cpp:361
 msgid "Present"
@@ -114,6 +369,139 @@ msgstr "存在"
 msgid "Not present"
 msgstr "不存在"
 
+#: buttons.cpp:122
+msgid "Lid Switch Closed"
+msgstr "關上螢幕的設定"
+
+#: buttons.cpp:124
+msgid "Select which actions will occur when the laptop's lid is closed"
+msgstr "選擇在電腦關上螢幕時要執行的動作"
+
+#: buttons.cpp:128 power.cpp:129 warning.cpp:241
+msgid "Standb&y"
+msgstr "待命(&Y)"
+
+#: buttons.cpp:129 buttons.cpp:205
+msgid "Causes the laptop to move into the standby temporary low-power state"
+msgstr "將電腦切換到待命(standby)狀態。"
+
+#: buttons.cpp:132 power.cpp:133 warning.cpp:247
+msgid "&Suspend"
+msgstr "暫停(&S)"
+
+#: buttons.cpp:133 buttons.cpp:209
+msgid "Causes the laptop to move into the suspend 'save-to-ram' state"
+msgstr "將電腦切換到暫停(suspend)狀態。"
+
+#: buttons.cpp:136 power.cpp:137 warning.cpp:253
+msgid "H&ibernate"
+msgstr "冬眠(&I)"
+
+#: buttons.cpp:137 buttons.cpp:213
+msgid "Causes the laptop to move into the hibernate 'save-to-disk' state"
+msgstr "將電腦切換到冬眠(hibernate)狀態。"
+
+#: buttons.cpp:140 buttons.cpp:216 warning.cpp:262
+msgid "System power off"
+msgstr "關閉系統"
+
+#: buttons.cpp:141 buttons.cpp:217
+msgid "Causes the laptop to power down"
+msgstr "將電腦電源關閉。"
+
+#: buttons.cpp:144 buttons.cpp:220
+msgid "Logout"
+msgstr "登出"
+
+#: buttons.cpp:145 buttons.cpp:221
+msgid "Causes you to be logged out"
+msgstr "讓您登出。"
+
+#: buttons.cpp:148
+msgid "&Off"
+msgstr "關閉(&O)"
+
+#: buttons.cpp:150 buttons.cpp:226 power.cpp:143 power.cpp:236
+msgid "Brightness"
+msgstr "亮度"
+
+#: buttons.cpp:151 buttons.cpp:227
+msgid "Causes the back panel brightness to be set"
+msgstr "設定背板亮度"
+
+#: buttons.cpp:157 buttons.cpp:232
+msgid "How bright the back panel will be set to"
+msgstr "背板亮度要設定為"
+
+#: buttons.cpp:164 buttons.cpp:240 power.cpp:158 power.cpp:251 profile.cpp:102
+#: profile.cpp:165 warning.cpp:192
+msgid "System performance"
+msgstr "系統效能"
+
+#: buttons.cpp:165 buttons.cpp:241
+msgid "Causes the performance profile to be changed"
+msgstr "更換效能設定"
+
+#: buttons.cpp:170 buttons.cpp:246
+msgid "The performance profile to switch to"
+msgstr "效能設定要切換為"
+
+#: buttons.cpp:178 buttons.cpp:254 power.cpp:173 power.cpp:266 profile.cpp:184
+msgid "CPU throttle"
+msgstr "CPU 效能上限 (throttle)"
+
+#: buttons.cpp:179 buttons.cpp:255
+msgid "Causes the CPU to be throttled back"
+msgstr "設定 CPU 效能上限"
+
+#: buttons.cpp:184 buttons.cpp:260
+msgid "How much to throttle back the CPU"
+msgstr "要將 CPU 效能上限設定為"
+
+#: buttons.cpp:198
+msgid "Power Switch Pressed"
+msgstr "按下電腦電源鍵"
+
+#: buttons.cpp:200
+msgid ""
+"Select which actions will occur when the laptop's power button is pressed"
+msgstr "選擇按下電腦電源鍵時要做的動作。"
+
+#: buttons.cpp:204 power.cpp:222
+msgid "Sta&ndby"
+msgstr "待命(&N)"
+
+#: buttons.cpp:208 power.cpp:226
+msgid "S&uspend"
+msgstr "暫停(&U)"
+
+#: buttons.cpp:212 power.cpp:230
+msgid "Hi&bernate"
+msgstr "冬眠(&B)"
+
+#: buttons.cpp:224
+msgid "O&ff"
+msgstr "關閉(&F)"
+
+#: buttons.cpp:272
+msgid ""
+"This panel enables actions that are triggered when the lid closure switch or "
+"power switch on your laptop is pressed. Some laptops may already "
+"automatically do things like this, if you cannot disable them in your BIOS "
+"you probably should not enable anything in this panel."
+msgstr ""
+"這個面板開啟在關上螢幕或是切換電源時要啟動的動作。有些電腦可能會自己做一些動"
+"作，如果您無法從 BIOS 關閉的話您可能最好不要開啟這個面板上的任何設定。"
+
+#: buttons.cpp:614
+msgid ""
+"<h1>Laptop Power Control</h1>This module allows you to configure the power "
+"switch or lid closure switch on your laptop so they can trigger system "
+"actions"
+msgstr ""
+"<h1>筆記型電腦電源控制</h1>這個模組可以讓您設定電源切換或是關上螢幕時啟動的動"
+"作。"
+
 #: main.cpp:155
 msgid "&Battery"
 msgstr "電池(&B)"
@@ -167,7 +555,9 @@ msgid ""
 "<h1>Laptop Battery</h1>This module allows you to monitor your batteries. To "
 "make use of this module, you must have power management software installed. "
 "(And, of course, you should have batteries in your machine.)"
-msgstr "<h1>電池監視器</h1>這個模組可以讓您監視電池。要使用這個模組，您必須安裝電源管理系統的軟體。當然，您的機器內必須安裝電池。"
+msgstr ""
+"<h1>電池監視器</h1>這個模組可以讓您監視電池。要使用這個模組，您必須安裝電源管"
+"理系統的軟體。當然，您的機器內必須安裝電池。"
 
 #: pcmcia.cpp:44
 msgid "kcmlaptop"
@@ -187,9 +577,10 @@ msgstr "版本："
 
 #: pcmcia.cpp:118
 msgid ""
-"<h1>PCMCIA Config</h1>This module shows information about the PCMCIA cards in "
-"your system, if there are PCMCIA cards."
-msgstr "<h1>PCMCIA 設定</h1>這個模組可以讓您顯示您系統上安裝的 PCMCIA 卡片資訊。"
+"<h1>PCMCIA Config</h1>This module shows information about the PCMCIA cards "
+"in your system, if there are PCMCIA cards."
+msgstr ""
+"<h1>PCMCIA 設定</h1>這個模組可以讓您顯示您系統上安裝的 PCMCIA 卡片資訊。"
 
 #: power.cpp:123 profile.cpp:76
 msgid "Not Powered"
@@ -201,26 +592,14 @@ msgid ""
 "been idle for a while"
 msgstr "這裡的選項會在電腦未插電並且停留一陣子之後啟用。"
 
-#: buttons.cpp:128 power.cpp:129 warning.cpp:241
-msgid "Standb&y"
-msgstr "待命(&Y)"
-
 #: power.cpp:130 power.cpp:223
 msgid "Causes the laptop to change to a standby temporary-low power state"
 msgstr "讓電腦切換到低耗電待命的狀態。"
 
-#: buttons.cpp:132 power.cpp:133 warning.cpp:247
-msgid "&Suspend"
-msgstr "暫停(&S)"
-
 #: power.cpp:134 power.cpp:227
 msgid "Causes the laptop to change to a suspend 'save-to-ram' state"
 msgstr "讓電腦進入暫停狀態並把目前狀態存到 RAM 中。"
 
-#: buttons.cpp:136 power.cpp:137 warning.cpp:253
-msgid "H&ibernate"
-msgstr "冬眠(&I)"
-
 #: power.cpp:138 power.cpp:231
 msgid "Causes the laptop to change to a hibernate 'save-to-disk' state"
 msgstr "讓電腦進入冬眠狀態，並把目前狀態儲存在磁碟中。"
@@ -229,10 +608,6 @@ msgstr "讓電腦進入冬眠狀態，並把目前狀態儲存在磁碟中。"
 msgid "None"
 msgstr "無"
 
-#: buttons.cpp:150 buttons.cpp:226 power.cpp:143 power.cpp:236
-msgid "Brightness"
-msgstr "亮度"
-
 #: power.cpp:144 power.cpp:237
 msgid "Enables changing the laptop's back panel brightness"
 msgstr "開啟以便調整電腦背板的亮度。"
@@ -241,11 +616,6 @@ msgstr "開啟以便調整電腦背板的亮度。"
 msgid "How bright to change the back panel"
 msgstr "要將背板調整到多亮"
 
-#: buttons.cpp:164 buttons.cpp:240 power.cpp:158 power.cpp:251 profile.cpp:102
-#: profile.cpp:165 warning.cpp:192
-msgid "System performance"
-msgstr "系統效能"
-
 #: power.cpp:159 power.cpp:252
 msgid "Enables changing the laptop's performance profile"
 msgstr "開啟以便調整電腦的效能設定"
@@ -254,10 +624,6 @@ msgstr "開啟以便調整電腦的效能設定"
 msgid "Which profile to change it to"
 msgstr "要使用哪種設定"
 
-#: buttons.cpp:178 buttons.cpp:254 power.cpp:173 power.cpp:266 profile.cpp:184
-msgid "CPU throttle"
-msgstr "CPU 效能上限 (throttle)"
-
 #: power.cpp:174 power.cpp:267
 msgid "Enables throttling the laptop's CPU"
 msgstr "開啟這個選項以便調整電腦 CPU 的效能上限 (throttle)"
@@ -272,9 +638,11 @@ msgstr "如果系統平均負擔大於多少時則停止動作"
 
 #: power.cpp:198 power.cpp:288
 msgid ""
-"If enabled and the system load average is greater than this value none of the "
-"above options will be applied"
-msgstr "如果開啟這個選項的話，在系統平均負擔大於特定值以上時，則以上的選項將不會被套用。"
+"If enabled and the system load average is greater than this value none of "
+"the above options will be applied"
+msgstr ""
+"如果開啟這個選項的話，在系統平均負擔大於特定值以上時，則以上的選項將不會被套"
+"用。"
 
 #: power.cpp:204
 msgid "&Wait for:"
@@ -296,22 +664,10 @@ msgstr "有電源狀態下："
 
 #: power.cpp:218
 msgid ""
-"Options in this box apply when the laptop is plugged into the wall and has been "
-"idle for a while"
+"Options in this box apply when the laptop is plugged into the wall and has "
+"been idle for a while"
 msgstr "這裡的選項會在電腦插上電源並且停留一陣子之後啟用。"
 
-#: buttons.cpp:204 power.cpp:222
-msgid "Sta&ndby"
-msgstr "待命(&N)"
-
-#: buttons.cpp:208 power.cpp:226
-msgid "S&uspend"
-msgstr "暫停(&U)"
-
-#: buttons.cpp:212 power.cpp:230
-msgid "Hi&bernate"
-msgstr "冬眠(&B)"
-
 #: power.cpp:294
 msgid "Wai&t for:"
 msgstr "等待(&T)："
@@ -319,29 +675,159 @@ msgstr "等待(&T)："
 #: power.cpp:304
 msgid ""
 "This panel configures the behavior of the automatic power-down feature - it "
-"works as a sort of extreme screen saver. You can configure different timeouts "
-"and types of behavior depending on whether or not your laptop is plugged in to "
-"the mains supply."
-msgstr "這個面板控制自動關機功能─像一種超級螢幕保護程式。您可以針對使用市電或電池以設置不同的延遲時間。"
+"works as a sort of extreme screen saver. You can configure different "
+"timeouts and types of behavior depending on whether or not your laptop is "
+"plugged in to the mains supply."
+msgstr ""
+"這個面板控制自動關機功能─像一種超級螢幕保護程式。您可以針對使用市電或電池以設"
+"置不同的延遲時間。"
 
 #: power.cpp:312
 msgid ""
 "Different laptops may respond to 'standby' in different ways - in many it is "
 "only a temporary state and may not be useful for you."
-msgstr "不同的筆記電腦有不同的「待命」方式─它可能只是是一個臨時狀態，不一定對您有用。"
-
-#: acpi.cpp:148 apm.cpp:144 buttons.cpp:281 power.cpp:320 profile.cpp:216
-#: sony.cpp:102 warning.cpp:291
-#, c-format
-msgid "Version: %1"
-msgstr "版本：%1"
+msgstr ""
+"不同的筆記電腦有不同的「待命」方式─它可能只是是一個臨時狀態，不一定對您有用。"
 
 #: power.cpp:581
 msgid ""
 "<h1>Laptop Power Control</h1>This module allows you to control the power "
-"settings of your laptop and set timouts that will trigger state changes you can "
-"use to save power"
-msgstr "<h1>筆記型電腦電源控制</h1>這個模組可以讓您控制筆記型電腦的電源設定，並設定各種狀態啟用的條件以節省電力。"
+"settings of your laptop and set timouts that will trigger state changes you "
+"can use to save power"
+msgstr ""
+"<h1>筆記型電腦電源控制</h1>這個模組可以讓您控制筆記型電腦的電源設定，並設定各"
+"種狀態啟用的條件以節省電力。"
+
+#: profile.cpp:77
+msgid ""
+"Items in this box take effect whenever the laptop is unplugged from the wall"
+msgstr "這裡的選項會在電腦不使用插座電源時啟動。"
+
+#: profile.cpp:81 profile.cpp:145
+msgid "Back panel brightness"
+msgstr "背板亮度"
+
+#: profile.cpp:82 profile.cpp:146
+msgid "Enables the changing of the back panel brightness"
+msgstr "開啟這個選項以改變背板亮度"
+
+#: profile.cpp:89 profile.cpp:153
+msgid "How bright it should be when it is changed"
+msgstr "要設定為多亮"
+
+#: profile.cpp:103 profile.cpp:166
+msgid "Enables the changing of the system performance profile"
+msgstr "開啟以改變系統效能設定"
+
+#: profile.cpp:108 profile.cpp:173
+msgid "The new system performance profile to change to"
+msgstr "新的系統效能設定為"
+
+#: profile.cpp:121 warning.cpp:215
+msgid "CPU throttling"
+msgstr "CPU 效能上限"
+
+#: profile.cpp:122 profile.cpp:185
+msgid "Enables the throttling of the CPU performance"
+msgstr "開啟以改變 CPU 效能上限"
+
+#: profile.cpp:129 profile.cpp:192
+msgid "How much to throttle the CPU by"
+msgstr "CPU 效能上限設定為"
+
+#: profile.cpp:141
+msgid ""
+"Items in this box take effect whenever the laptop is plugged into the wall"
+msgstr "這裡的選項會在電腦使用插座電源時啟動。"
+
+#: profile.cpp:205
+msgid ""
+"This panel allows you to set default values for system attributes so that "
+"they change when the laptop is plugged in to the wall or running on "
+"batteries."
+msgstr "這個面板讓您設定系統屬性的預設值，在電腦電源切換時可以應用。"
+
+#: profile.cpp:211
+msgid ""
+"You can also set options for these values that will be set by low battery "
+"conditions, or system inactivity in the other panels"
+msgstr "您也可以在其他面板設定電腦在低電位狀態，或是系統不動作時的值。"
+
+#: profile.cpp:411
+msgid ""
+"<h1>Laptop Power Profile Setup</h1>This module allows you to configure "
+"default values for static laptop system attributes that will change when the "
+"laptop is plugged in or unplugged from the wall."
+msgstr ""
+"<h1>筆記型電腦電源控制設定</h1>這個模組讓您設定系統屬性的預設值，在電腦電源切"
+"換時可以應用。"
+
+#: sony.cpp:69
+msgid ""
+"This panel allows you to control some of the features of the\n"
+"'sonypi' device for your laptop - you should not enable the options below if "
+"you\n"
+"also use the 'sonypid' program in your system"
+msgstr ""
+"這個面板讓您控制您的電腦中 sonypi 設備的某些功能。如果您已經使用 sonypid 這支"
+"程式，請不要打開此選項。"
+
+#: sony.cpp:73
+msgid "Enable &scroll bar"
+msgstr "開啟捲軸(&S)"
+
+#: sony.cpp:74
+msgid "When checked this box enables the scrollbar so that it works under TDE"
+msgstr "開啟這個選項可以在 TDE 下使用捲軸功能。"
+
+#: sony.cpp:78
+msgid "&Emulate middle mouse button with scroll bar press"
+msgstr "按下捲軸時模擬滑鼠中鍵功能(&E)"
+
+#: sony.cpp:79
+msgid ""
+"When checked this box enables pressing the scroll bar to act in the same way "
+"as pressing the middle button on a 3 button mouse"
+msgstr "開啟這個選項的話，按住捲軸的行為就會跟按下滑鼠中鍵一樣。"
+
+#: sony.cpp:88
+msgid ""
+"The /dev/sonypi is not accessable, if you wish to use the above features "
+"its\n"
+"protections need to be changed. Clicking on the button below will change "
+"them\n"
+msgstr ""
+"/dev/sonypi 無法存取。如果您要使用這個功能，請改變它的權限。按下底下的按鈕可"
+"以改變其權限。\n"
+
+#: sony.cpp:91
+msgid "Setup /dev/sonypi"
+msgstr "設定 /dev/sonypi"
+
+#: sony.cpp:93
+msgid "This button can be used to enable the sony specific features"
+msgstr "這個按鈕可以開啟 sony 特殊功能設定。"
+
+#: sony.cpp:113
+msgid ""
+"You will need to supply a root password to allow the protections of /dev/"
+"sonypi to be changed."
+msgstr "您需要 root 密碼才能改變 /dev/sonypi 權限。"
+
+#: sony.cpp:126
+msgid ""
+"The /dev/sonypi protections cannot be changed because tdesu cannot be "
+"found.  Please make sure that it is installed correctly."
+msgstr ""
+"/dev/sonypi 權限無法改變，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安"
+"裝。"
+
+#: sony.cpp:187
+msgid ""
+"<h1>Sony Laptop Hardware Setup</h1>This module allows you to configure some "
+"Sony laptop hardware for your system"
+msgstr ""
+"<h1>Sony 筆記型電腦設定</h1>這個模組可以讓您設定部份 Sony 筆記型電腦硬體。"
 
 #: warning.cpp:78 warning.cpp:79
 msgid "Critical &trigger:"
@@ -411,10 +897,6 @@ msgstr "開啟這個選項以改變電腦的電源效能設定。"
 msgid "The performance profile to change to"
 msgstr "電源效能設定改為"
 
-#: profile.cpp:121 warning.cpp:215
-msgid "CPU throttling"
-msgstr "CPU 效能上限"
-
 #: warning.cpp:216
 msgid "If enabled the CPU performance will be throttled"
 msgstr "開啟這個選項的話，會控制 CPU 的效能上限。"
@@ -441,16 +923,13 @@ msgstr "將系統切入暫停(suspend)狀態─又稱 save-to-ram，將目前狀
 
 #: warning.cpp:254
 msgid "Move the system into the hibernate state - also known as 'save-to-disk'"
-msgstr "將系統切入冬眠(hibernate)狀態─又稱 save-to-disk，將目前狀態存入磁碟中。"
+msgstr ""
+"將系統切入冬眠(hibernate)狀態─又稱 save-to-disk，將目前狀態存入磁碟中。"
 
 #: warning.cpp:259
 msgid "&Logout"
 msgstr "登出(&L)"
 
-#: buttons.cpp:140 buttons.cpp:216 warning.cpp:262
-msgid "System power off"
-msgstr "關閉系統"
-
 #: warning.cpp:263
 msgid "Power the laptop off"
 msgstr "關閉電腦"
@@ -461,14 +940,14 @@ msgstr "無(&N)"
 
 #: warning.cpp:275
 msgid ""
-"This panel controls how and when you receive warnings that your battery power "
-"is going to run out VERY VERY soon."
+"This panel controls how and when you receive warnings that your battery "
+"power is going to run out VERY VERY soon."
 msgstr "這個面板控制電池「即將」用完時如何處理。"
 
 #: warning.cpp:277
 msgid ""
-"This panel controls how and when you receive warnings that your battery power "
-"is about to run out"
+"This panel controls how and when you receive warnings that your battery "
+"power is about to run out"
 msgstr "這個面板控制電池快用完時如何處理。"
 
 #: warning.cpp:570 warning.cpp:587
@@ -477,445 +956,17 @@ msgstr "目前只支援本地端檔案。"
 
 #: warning.cpp:598
 msgid ""
-"<h1>Low battery Warning</h1>This module allows you to set an alarm in case your "
-"battery's charge is about to run out."
+"<h1>Low battery Warning</h1>This module allows you to set an alarm in case "
+"your battery's charge is about to run out."
 msgstr "<h1>低電位警告</h1>這個模組可以讓您設定當電池電量不足時的警告。"
 
-#: acpi.cpp:64
-msgid ""
-"This panel provides information about your system's ACPI implementation and "
-"lets you have access to some of the extra features provided by ACPI"
-msgstr "這個面板提供關於您電腦的 ACPI 資訊，並讓您調整 ACPI 提供的一些額外功能。"
-
-#: acpi.cpp:69
-msgid ""
-"NOTE: the Linux ACPI implementation is still a 'work in progress'. Some "
-"features, in particular suspend and hibernate are not yet available under 2.4 - "
-"and under 2.5 some particular ACPI implementations are still unstable, these "
-"check boxes let you only enable the things that work reliably. You should test "
-"these features very gingerly - save all your work, check them on and try a "
-"suspend/standby/hibernate from the popup menu on the battery icon in the panel "
-"if it fails to come back successfully uncheck the box again."
-msgstr ""
-"注意：Linux ACPI 實作還在實驗中。有些功能，特別是暫停(suspend)與冬眠(hibernate)在 2.4 版核心中尚未支援。另外在 2.5 "
-"版核心中某些版本的 ACPI "
-"還不穩定，這裡只讓您開啟部份穩定的功能選項。您必須非常小心的測試這些功能─儲存好您的工作，再試試從電池面板圖示的目錄中開啟暫停/待命/冬眠等功能。如果有問題的話"
-"，取消這些功能。"
-
-#: acpi.cpp:79 apm.cpp:77
-msgid ""
-"Some changes made on this page may require you to quit the laptop panel and "
-"start it again to take effect"
-msgstr "您改變的部份設定需要請您先離開面板並重新啟動。"
-
-#: acpi.cpp:85 apm.cpp:83
-msgid "Enable standby"
-msgstr "開啟待命狀態"
-
-#: acpi.cpp:87 apm.cpp:85
-msgid ""
-"If checked this box enables transitions to the 'standby' state - a temporary "
-"powered down state"
-msgstr "開啟這個選項讓系統可以切入待命(standby)的狀態。"
-
-#: acpi.cpp:91 apm.cpp:89
-msgid "Enable &suspend"
-msgstr "開啟暫停狀態(&S)"
-
-#: acpi.cpp:93 apm.cpp:91
-msgid ""
-"If checked this box enables transitions to the 'suspend' state - a semi-powered "
-"down state, sometimes called 'suspend-to-ram'"
-msgstr "開啟這個選項讓系統可以切入暫停(suspend)的狀態。"
-
-#: acpi.cpp:98
-msgid "Enable &hibernate"
-msgstr "開啟冬眠狀態(&H)"
-
-#: acpi.cpp:100
-msgid ""
-"If checked this box enables transitions to the 'hibernate' state - a powered "
-"down state, sometimes called 'suspend-to-disk'"
-msgstr "開啟這個選項讓系統可以切入冬眠(hibernate)的狀態。"
-
-#: acpi.cpp:105
-msgid "Use software suspend for hibernate"
-msgstr "使用軟體暫停(software suspend)來執行冬眠功能"
-
-#: acpi.cpp:107
-msgid ""
-"If checked this box enables transitions to the 'hibernate' state - a powered "
-"down state, sometimes called 'suspend-to-disk' - the kernel 'Software Suspend' "
-"mechanism will be used instead of using ACPI directly"
-msgstr "開啟這個選項的話，會用核心中的「軟體暫停」(Software Suspend)機制而不用 ACPI 的控制來執行冬眠狀態。"
-
-#: acpi.cpp:117
-msgid "Enable &performance profiles"
-msgstr "開啟效能設定(&P)"
-
-#: acpi.cpp:119
-msgid ""
-"If checked this box enables access to ACPI performance profiles - usually OK in "
-"2.4 and later"
-msgstr "開啟這個選項以便設定 ACPI 效能設定。通常在 2.4 版以後的核心都可以使用。"
-
-#: acpi.cpp:123
-msgid "Enable &CPU throttling"
-msgstr "開啟 CPU 效能上限(&C)"
-
-#: acpi.cpp:125
-msgid ""
-"If checked this box enables access to ACPI throttle speed changes - usually OK "
-"in 2.4 and later"
-msgstr "開啟這個選項以便設定 ACPI 對 CPU 效能上限的控制。通常在 2.4 版以後的核心都可以使用。"
-
-#: acpi.cpp:129
-msgid ""
-"If the above boxes are disabled then there is no 'helper' application set up to "
-"help change ACPI states, there are two ways you can enable this application, "
-"either make the file /proc/acpi/sleep writeable by anyone every time your "
-"system boots or use the button below to make the TDE ACPI helper application "
-"set-uid root"
-msgstr ""
-"如果以上的選項都關閉，則沒有其他應用程式可以改變 ACPI 狀態。這種狀況下有兩個方法，一個是在開機時將 /proc/acpi/sleep "
-"檔設定為所有人都可以讀寫，或是用底下的按鈕將 TDE ACPI 設定程式設為 set-uid root。"
-
-#: acpi.cpp:138 apm.cpp:107
-msgid "Setup Helper Application"
-msgstr "設定 ACPI 設定應用程式"
-
-#: acpi.cpp:140
-msgid "This button can be used to enable the ACPI helper application"
-msgstr "這個按鈕可以開啟 ACPI 設定應用程式"
-
-#: acpi.cpp:172 apm.cpp:194
-msgid ""
-"You will need to supply a root password to allow the privileges of the "
-"klaptop_acpi_helper to change."
-msgstr "您需要輸入 root 的密碼。"
-
-#: acpi.cpp:174 acpi.cpp:186 apm.cpp:174 apm.cpp:196 apm.cpp:208 sony.cpp:115
-#: sony.cpp:127
-msgid "KLaptopDaemon"
-msgstr "KLaptopDaemon"
-
-#: acpi.cpp:185
-msgid ""
-"The ACPI helper cannot be enabled because tdesu cannot be found.  Please make "
-"sure that it is installed correctly."
-msgstr "ACPI 設定程式無法開啟，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
-
-#: acpi.cpp:268
-msgid ""
-"<h1>ACPI Setup</h1>This module allows you to configure ACPI for your system"
-msgstr "<h1>設定 ACPI</h1>這個模組可以讓您控制電腦的 ACPI 設定。"
-
-#: sony.cpp:69
-msgid ""
-"This panel allows you to control some of the features of the\n"
-"'sonypi' device for your laptop - you should not enable the options below if "
-"you\n"
-"also use the 'sonypid' program in your system"
-msgstr "這個面板讓您控制您的電腦中 sonypi 設備的某些功能。如果您已經使用 sonypid 這支程式，請不要打開此選項。"
-
-#: sony.cpp:73
-msgid "Enable &scroll bar"
-msgstr "開啟捲軸(&S)"
-
-#: sony.cpp:74
-msgid "When checked this box enables the scrollbar so that it works under TDE"
-msgstr "開啟這個選項可以在 TDE 下使用捲軸功能。"
-
-#: sony.cpp:78
-msgid "&Emulate middle mouse button with scroll bar press"
-msgstr "按下捲軸時模擬滑鼠中鍵功能(&E)"
-
-#: sony.cpp:79
-msgid ""
-"When checked this box enables pressing the scroll bar to act in the same way as "
-"pressing the middle button on a 3 button mouse"
-msgstr "開啟這個選項的話，按住捲軸的行為就會跟按下滑鼠中鍵一樣。"
-
-#: sony.cpp:88
-msgid ""
-"The /dev/sonypi is not accessable, if you wish to use the above features its\n"
-"protections need to be changed. Clicking on the button below will change them\n"
-msgstr ""
-"/dev/sonypi 無法存取。如果您要使用這個功能，請改變它的權限。按下底下的按鈕可以改變其權限。\n"
-
-#: sony.cpp:91
-msgid "Setup /dev/sonypi"
-msgstr "設定 /dev/sonypi"
-
-#: sony.cpp:93
-msgid "This button can be used to enable the sony specific features"
-msgstr "這個按鈕可以開啟 sony 特殊功能設定。"
-
-#: sony.cpp:113
-msgid ""
-"You will need to supply a root password to allow the protections of /dev/sonypi "
-"to be changed."
-msgstr "您需要 root 密碼才能改變 /dev/sonypi 權限。"
-
-#: sony.cpp:126
-msgid ""
-"The /dev/sonypi protections cannot be changed because tdesu cannot be found.  "
-"Please make sure that it is installed correctly."
-msgstr "/dev/sonypi 權限無法改變，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
-
-#: sony.cpp:187
-msgid ""
-"<h1>Sony Laptop Hardware Setup</h1>This module allows you to configure some "
-"Sony laptop hardware for your system"
-msgstr "<h1>Sony 筆記型電腦設定</h1>這個模組可以讓您設定部份 Sony 筆記型電腦硬體。"
-
-#: profile.cpp:77
-msgid ""
-"Items in this box take effect whenever the laptop is unplugged from the wall"
-msgstr "這裡的選項會在電腦不使用插座電源時啟動。"
-
-#: profile.cpp:81 profile.cpp:145
-msgid "Back panel brightness"
-msgstr "背板亮度"
-
-#: profile.cpp:82 profile.cpp:146
-msgid "Enables the changing of the back panel brightness"
-msgstr "開啟這個選項以改變背板亮度"
-
-#: profile.cpp:89 profile.cpp:153
-msgid "How bright it should be when it is changed"
-msgstr "要設定為多亮"
-
-#: profile.cpp:103 profile.cpp:166
-msgid "Enables the changing of the system performance profile"
-msgstr "開啟以改變系統效能設定"
-
-#: profile.cpp:108 profile.cpp:173
-msgid "The new system performance profile to change to"
-msgstr "新的系統效能設定為"
-
-#: profile.cpp:122 profile.cpp:185
-msgid "Enables the throttling of the CPU performance"
-msgstr "開啟以改變 CPU 效能上限"
-
-#: profile.cpp:129 profile.cpp:192
-msgid "How much to throttle the CPU by"
-msgstr "CPU 效能上限設定為"
-
-#: profile.cpp:141
-msgid ""
-"Items in this box take effect whenever the laptop is plugged into the wall"
-msgstr "這裡的選項會在電腦使用插座電源時啟動。"
-
-#: profile.cpp:205
-msgid ""
-"This panel allows you to set default values for system attributes so that they "
-"change when the laptop is plugged in to the wall or running on batteries."
-msgstr "這個面板讓您設定系統屬性的預設值，在電腦電源切換時可以應用。"
-
-#: profile.cpp:211
-msgid ""
-"You can also set options for these values that will be set by low battery "
-"conditions, or system inactivity in the other panels"
-msgstr "您也可以在其他面板設定電腦在低電位狀態，或是系統不動作時的值。"
-
-#: profile.cpp:411
-msgid ""
-"<h1>Laptop Power Profile Setup</h1>This module allows you to configure default "
-"values for static laptop system attributes that will change when the laptop is "
-"plugged in or unplugged from the wall."
-msgstr "<h1>筆記型電腦電源控制設定</h1>這個模組讓您設定系統屬性的預設值，在電腦電源切換時可以應用。"
-
-#: buttons.cpp:122
-msgid "Lid Switch Closed"
-msgstr "關上螢幕的設定"
-
-#: buttons.cpp:124
-msgid "Select which actions will occur when the laptop's lid is closed"
-msgstr "選擇在電腦關上螢幕時要執行的動作"
-
-#: buttons.cpp:129 buttons.cpp:205
-msgid "Causes the laptop to move into the standby temporary low-power state"
-msgstr "將電腦切換到待命(standby)狀態。"
-
-#: buttons.cpp:133 buttons.cpp:209
-msgid "Causes the laptop to move into the suspend 'save-to-ram' state"
-msgstr "將電腦切換到暫停(suspend)狀態。"
-
-#: buttons.cpp:137 buttons.cpp:213
-msgid "Causes the laptop to move into the hibernate 'save-to-disk' state"
-msgstr "將電腦切換到冬眠(hibernate)狀態。"
-
-#: buttons.cpp:141 buttons.cpp:217
-msgid "Causes the laptop to power down"
-msgstr "將電腦電源關閉。"
-
-#: buttons.cpp:144 buttons.cpp:220
-msgid "Logout"
-msgstr "登出"
-
-#: buttons.cpp:145 buttons.cpp:221
-msgid "Causes you to be logged out"
-msgstr "讓您登出。"
-
-#: buttons.cpp:148
-msgid "&Off"
-msgstr "關閉(&O)"
-
-#: buttons.cpp:151 buttons.cpp:227
-msgid "Causes the back panel brightness to be set"
-msgstr "設定背板亮度"
-
-#: buttons.cpp:157 buttons.cpp:232
-msgid "How bright the back panel will be set to"
-msgstr "背板亮度要設定為"
-
-#: buttons.cpp:165 buttons.cpp:241
-msgid "Causes the performance profile to be changed"
-msgstr "更換效能設定"
-
-#: buttons.cpp:170 buttons.cpp:246
-msgid "The performance profile to switch to"
-msgstr "效能設定要切換為"
-
-#: buttons.cpp:179 buttons.cpp:255
-msgid "Causes the CPU to be throttled back"
-msgstr "設定 CPU 效能上限"
-
-#: buttons.cpp:184 buttons.cpp:260
-msgid "How much to throttle back the CPU"
-msgstr "要將 CPU 效能上限設定為"
-
-#: buttons.cpp:198
-msgid "Power Switch Pressed"
-msgstr "按下電腦電源鍵"
-
-#: buttons.cpp:200
-msgid ""
-"Select which actions will occur when the laptop's power button is pressed"
-msgstr "選擇按下電腦電源鍵時要做的動作。"
-
-#: buttons.cpp:224
-msgid "O&ff"
-msgstr "關閉(&F)"
-
-#: buttons.cpp:272
-msgid ""
-"This panel enables actions that are triggered when the lid closure switch or "
-"power switch on your laptop is pressed. Some laptops may already automatically "
-"do things like this, if you cannot disable them in your BIOS you probably "
-"should not enable anything in this panel."
-msgstr ""
-"這個面板開啟在關上螢幕或是切換電源時要啟動的動作。有些電腦可能會自己做一些動作，如果您無法從 BIOS 關閉的話您可能最好不要開啟這個面板上的任何設定。"
-
-#: buttons.cpp:614
-msgid ""
-"<h1>Laptop Power Control</h1>This module allows you to configure the power "
-"switch or lid closure switch on your laptop so they can trigger system actions"
-msgstr "<h1>筆記型電腦電源控制</h1>這個模組可以讓您設定電源切換或是關上螢幕時啟動的動作。"
-
-#: apm.cpp:64
-msgid ""
-"This panel lets you configure your APM system and lets you have access to some "
-"of the extra features provided by it"
-msgstr "這個面板讓您設定您的 APM 系統，並讓您能存取它提供的額外功能。"
-
-#: apm.cpp:69
-msgid ""
-"NOTE: some APM implementations have buggy suspend/standby implementations. You "
-"should test these features very gingerly - save all your work, check them on "
-"and try a suspend/standby from the popup menu on the battery icon in the panel "
-"if it fails to come back successfully uncheck the box again."
-msgstr ""
-"注意：有些 APM 實作暫停/待命狀態時是有問題的。您必須非常小心的測試這些功能─儲存好您的工作，再試試從電池圖示的目錄中開啟暫停/待命功能。"
-
-#: apm.cpp:98
-msgid ""
-"If the above boxes are disabled then there is no 'helper' application set up to "
-"help change APM states, there are two ways you can enable this application, "
-"either make the file /proc/apm writeable by anyone every time your system boots "
-"or use the button below to make the %1 application set-uid root"
-msgstr ""
-"如果以上的選項都關閉，則沒有其他應用程式可以改變 APM 狀態。這種狀況下有兩個方法，一個是在開機時將 /proc/apm "
-"檔設定為所有人都可以讀寫，或是用底下的按鈕將 %1 程式設為 set-uid root。"
-
-#: apm.cpp:109
-msgid "This button can be used to enable the APM helper application"
-msgstr "這個按鈕可以開啟 APM 設定應用程式"
-
-#: apm.cpp:114
-msgid ""
-"Your system seems to have 'Software Suspend' installed, this can be used to "
-"hibernate or 'suspend to disk' your system if you want to use this for "
-"hibernation check the box below"
-msgstr "您的系統上有安裝軟體暫停功能，您可以勾選來使用它讓系統進入冬眠(hibernate)狀態。"
-
-#: apm.cpp:119
-msgid "Enable software suspend for hibernate"
-msgstr "冬眠時使用軟體暫停模式"
-
-#: apm.cpp:121
-msgid ""
-"If checked this box enables transitions to the 'hibernate' state using the "
-"'Software Suspend' mechanism"
-msgstr "開啟這個選項的話，會使用軟體暫停(Software Suspend)來進入冬眠模式。"
-
-#: apm.cpp:124
-msgid ""
-"If the above box is disabled then you need to be logged in as root or need a "
-"helper application to invoke the Software Suspend utility - TDE provides a "
-"utility to do this, if you wish to use it you must make it set-uid root, the "
-"button below will do this for you"
-msgstr ""
-"如果關閉以上的選項，您需要登入為 root 或一支可以叫出軟體暫停功能的程式。TDE 有提供這樣的功能，如果您要使用 TDE 提供的功能，您必須將它設定為 "
-"setuid root。底下的按鈕可以提供您更改其權限。"
-
-#: apm.cpp:132
-msgid "Setup SS Helper Application"
-msgstr "設定軟體暫停應用程式"
-
-#: apm.cpp:134
-msgid ""
-"This button can be used to enable the Software Suspend helper application"
-msgstr "這個按鈕可以開啟軟體暫停設定程式。"
-
-#: apm.cpp:160
-msgid ""
-"You will need to supply a root password to allow the privileges of the %1 "
-"application to change."
-msgstr "您需要 root 密碼才能改變 %1 的權限。"
-
-#: apm.cpp:173
-msgid ""
-"%1 cannot be enabled because tdesu cannot be found.  Please make sure that it "
-"is installed correctly."
-msgstr "%1 無法開啟，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
-
-#: apm.cpp:207
-msgid ""
-"The Software Suspend helper cannot be enabled because tdesu cannot be found.  "
-"Please make sure that it is installed correctly."
-msgstr "無法開啟軟體暫停設定，因為找不到 tdesu 這支程式。請確定您的 TDE 有正確安裝。"
-
-#: apm.cpp:271
-msgid ""
-"<h1>APM Setup</h1>This module allows you to configure APM for your system"
-msgstr "<h1>APM 設定</h1>這個模組讓您設定 APM。"
-
-#: _translatorinfo.cpp:1
-msgid ""
-"_: NAME OF TRANSLATORS\n"
-"Your names"
-msgstr "Frank Weng (a.k.a. Franklin)"
-
-#: _translatorinfo.cpp:3
-msgid ""
-"_: EMAIL OF TRANSLATORS\n"
-"Your emails"
-msgstr "franklin at goodhorse dot idv dot tw"
-
-#~ msgid "The %1 application does not seem to have the same size or checksum as when it was compiled we do NOT recommend you proceed with making it setuid-root without further investigation"
-#~ msgstr "%1 這個軟體的大小或是檢查碼不正確。我們不建議在您弄清楚怎麼回事之前就將此軟體設定為 setuid-root."
+#~ msgid ""
+#~ "The %1 application does not seem to have the same size or checksum as "
+#~ "when it was compiled we do NOT recommend you proceed with making it "
+#~ "setuid-root without further investigation"
+#~ msgstr ""
+#~ "%1 這個軟體的大小或是檢查碼不正確。我們不建議在您弄清楚怎麼回事之前就將此"
+#~ "軟體設定為 setuid-root."
 
 #~ msgid "Run Nevertheless"
 #~ msgstr "還是要做"