Update translation files

Updated by Update PO files to match POT (msgmerge) hook in Weblate.

(cherry picked from commit da09f211a04674f2d78dbbbf493e08bcffd2bb7a)

1 files changed, 321 insertions, 328 deletions

diff --git a/tde-i18n-zh_TW/messages/tdenetwork/kcmlanbrowser.po b/tde-i18n-zh_TW/messages/tdenetwork/kcmlanbrowser.po
index f962afcbb6f..1194f365d0d 100644
--- a/tde-i18n-zh_TW/messages/tdenetwork/kcmlanbrowser.po
+++ b/tde-i18n-zh_TW/messages/tdenetwork/kcmlanbrowser.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: kcmlanbrowser\n"
-"POT-Creation-Date: 2014-09-29 12:06-0500\n"
+"POT-Creation-Date: 2018-12-20 01:34+0100\n"
 "PO-Revision-Date: 2006-06-19 12:55+0800\n"
 "Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
 "dot tw>\n"
@@ -18,313 +18,45 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.11.2\n"
 
-#: setupwizard.cpp:63
-msgid "LISa Network Neighborhood Setup"
-msgstr "LISa 網路芳鄰設定"
-
-#: setupwizard.cpp:71 setupwizard.cpp:512
-msgid "Advanced Settings"
-msgstr "進階設定"
-
-#: setupwizard.cpp:126
-msgid ""
-"<qt>"
-"<p>This wizard will ask you a few questions about your network.</p> "
-"<p>Usually you can simply keep the suggested settings.</p> "
-"<p>After you have finished the wizard, you will be able to browse and use "
-"shared resources on your LAN, not only Samba/Windows shares, but also FTP, HTTP "
-"and NFS resources exactly the same way.</p> "
-"<p>Therefore you need to setup the <i>LAN Information Server</i> "
-"(LISa) on your machine. Think of the LISa server as an FTP or HTTP server; it "
-"has to be run by root, it should be started during the boot process and only "
-"one LISa server can run on one machine.</qt>"
-msgstr ""
-"<qt>"
-"<p>這個精靈將會問您一點點關於您網路的問題。</p>"
-"<p>通常您可以簡單地保留建議設定。</p>"
-"<p>在您結束這個精靈之後，您將可以瀏覽並且使用在您區域網路上分享的資源，不只是 Samba/Windows 的分享，還有 FTP, HTTP 和 NFS "
-"的資源。</p>"
-"<p>因此您需要在您的機器上設定<i>區域網路資訊伺服器</i>(LISa)。將 LISa 當作像是 FTP 或 HTTP 伺服器一樣，它可以以 root "
-"身份來執行，它應該在 boot 時期被啟動，並且一部機器只跑一個 LISa server 。</p></qt>"
-
-#: setupwizard.cpp:149
-msgid ""
-"<qt>"
-"<p>More than one network interface card was found on your system.</p>"
-"<p>Please choose the one to which your LAN is connected.</p></qt>"
-msgstr "<qt><p>在您的機器上發現超過一張以上的網路卡。</p><p>請選擇您的區域網路有連結的那一張。</p></qt>"
-
-#: setupwizard.cpp:164
-msgid ""
-"<qt>"
-"<p><b>No network interface card was found on your system.</b></p>"
-"<p>Possible reason: no network card is installed. You probably want to cancel "
-"now or enter your IP address and network manually</p>Example: <code>"
-"192.168.0.1/255.255.255.0</code>.</qt>"
-msgstr ""
-"<qt>"
-"<p><b>在您的機器上沒有發現網路卡。</b></p>"
-"<p>可能的理由：沒有安裝網路卡。您現在也許想要離開，或是手動地輸入您的 IP 位址和網路設定。</p>例如：<code>"
-"192.168.0.1/255.255.255.0</code>。</qt>"
-
-#: setupwizard.cpp:185
-msgid "There are two ways LISa can search hosts on your network."
-msgstr "LISa 在您的網路上有兩個可以搜尋主機的方法。"
-
-#: setupwizard.cpp:187
-msgid "Send pings"
-msgstr "送出 pings"
-
-#: setupwizard.cpp:188
-msgid ""
-"All hosts with TCP/IP will respond,"
-"<br>whether or not they are samba servers."
-"<br>Don't use it if your network is very large, i.e. more than 1000 hosts."
-"<br>"
-msgstr ""
-"所有 TCP/IP 的主機將回應，"
-"<br> 不論他們是否是 samba 伺服器。"
-"<br> 如果您的網路非常大，例如，超過 1000 台主機，請不要使用。"
-"<br>"
-
-#: setupwizard.cpp:191
-msgid "Send NetBIOS broadcasts"
-msgstr "送出 NetBIOS 廣播"
-
-#: setupwizard.cpp:192
-msgid ""
-"You need to have the samba package (nmblookup) installed."
-"<br>Only samba/windows servers will respond."
-"<br>This method is not very reliable."
-"<br>You should enable it if you are part of a large network."
-msgstr ""
-"您需要安裝 samba 套件(nmblookup)。"
-"<br> 只有 samba/windows 伺服器會回應。"
-"<br> 這個方法並不十分可靠。"
-"<br> 但是如果您所在的網路很大，您應該用此選項。"
-
-#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249
-#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340
-msgid "<b>If unsure, keep it as is.</b>"
-msgstr "<b>如果不確定，保持原狀。</b>"
-
-#: setupwizard.cpp:210
-msgid ""
-"All IP addresses included in the specified range will be pinged."
-"<br>If you are part of a small network, e.g. with network mask 255.255.255.0"
-"<br>use your IP address/network mask."
-"<br>"
-msgstr ""
-"所有包含在指定範圍內的 IP 位址將會被測試。"
-"<br> 如果您是一個小型網路的一部分，例如，網路遮罩為 255.255.255.0，"
-"<br> 則請使用您的 IP 位址/網路遮罩。"
-"<br>"
-
-#: setupwizard.cpp:215
-msgid ""
-"<br>There are four ways to specify address ranges:"
-"<br>1. IP address/network mask, like <code>192.168.0.0/255.255.255.0;</code>"
-"<br>2. single IP addresses, like <code>10.0.0.23;</code>"
-"<br>3. continuous ranges, like <code>10.0.1.0-10.0.1.200;</code>"
-"<br>4. ranges for each part of the address, like <code>"
-"10-10.1-5.1-25.1-3;</code>"
-"<br>You can also enter combinations of 1 to 4, separated by \";\", like"
-"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
-"<br>"
-msgstr ""
-"<br>有四個方法來指定位址範圍："
-"<br> 1. IP 位址/網路遮罩，像是<code>192.168.0.0/255.255.255.0</code>。"
-"<br> 2. 單一 IP 位址，像是<code>10.0.0.23</code>。"
-"<br> 3. 連續的範圍，例如<code>10.0.1.0-10.0.1.200</code>。"
-"<br> 4. 位址每個部份的範圍，像是<code>10-10.1-5.1-25.1-3</code>。"
-"<br> 您也可以輸入 1 到 4 的組合，使用\";\"分開，"
-"<br> 像是<code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100</code>"
-"<br>"
-
-#: setupwizard.cpp:236
-msgid ""
-"This is a security related setting."
-"<br>It provides a simple IP address based way to specify \"trusted\" hosts."
-"<br>Only hosts which fit into the addresses given here are accepted by LISa as "
-"clients. The list of hosts published by LISa will also only contain hosts which "
-"fit into this scheme."
-"<br>Usually you enter your IP address/network mask here."
-msgstr ""
-"這是一個安全相關的設定。"
-"<br>它提供一個簡易的以 IP 位址為基礎的方式來指定\"被信任的\"主機。"
-"<br>只有這裡提供的合適位址才會被客戶端的 LISa 所接受。由 LISa 所發佈的主機列表也只包含適合這項計劃的主機。"
-"<br>通常您可在這兒輸入您的 IP 位址/網路遮罩。"
-
-#: setupwizard.cpp:258
-msgid ""
-"<br>Enter your IP address and network mask here, like <code>"
-"192.168.0.1/255.255.255.0</code>"
-msgstr "<br>在這兒輸入您的 IP 位址和網路遮罩，像是<code>192.168.0.1/255.255.255.0</code>"
-
-#: setupwizard.cpp:261
-msgid ""
-"<br>To reduce the network load, the LISa servers in one network"
-"<br>cooperate with each other. Therefore you have to enter the broadcast"
-"<br>address here. If you are connected to more than one network, choose "
-"<br>one of the broadcast addresses."
-msgstr ""
-"<br>為了減少網路負載，在網路上的 LISa 伺服器"
-"<br>會彼此合作。因此您可以在此輸入廣播位址。"
-"<br>如果您連結一個以上的網路，請選則其中一個"
-"<br>廣播位址。"
-
-#: setupwizard.cpp:280
-msgid ""
-"<br>Enter the interval after which LISa, if busy, will update its host list."
-msgstr "<br>輸入當 LISa 忙碌時，下一次更新主機列表的時間間隔。"
-
-#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284
-msgid " sec"
-msgstr " 秒"
-
-#: setupwizard.cpp:286
-msgid ""
-"<br>Please note that the update interval will grow automatically by up to 16 "
-"times the value you enter here, if nobody accesses the LISa server. So if you "
-"enter 300 sec = 5 min here, this does not mean that LISa will ping your whole "
-"network every 5 minutes. The interval will increase up to 16 x 5 min = 80 min."
-msgstr ""
-"<br>請注意，若是都沒有人去存取 LISa 伺服器，更新間隔會自動拉大到您所輸入數值的十六倍。若是您輸入 300 秒（五分鐘），這並不表示 LISa "
-"會每五分鐘 ping 一次您的網路。最大可能會 5x16=80 分鐘才會 ping 一次。"
-
-#: setupwizard.cpp:305
-msgid ""
-"This page contains several settings you usually only"
-"<br>need if LISa doesn't find all hosts in your network."
-msgstr "如果 LISa 無法在您的網路上發現所有主機，<br>本頁包含一些您需要的設定。"
-
-#: setupwizard.cpp:308
-msgid "Re&port unnamed hosts"
-msgstr "回覆未命名的主機(&P)"
-
-#: setupwizard.cpp:309
-msgid ""
-"Should hosts for which LISa can't resolve the name be included in the host "
-"list?"
-"<br>"
-msgstr "LISa 無法分析的主機名稱的主機，該被包含在主機列表裡嗎？<br>"
-
-#: setupwizard.cpp:313
-msgid "Wait for replies after first scan"
-msgstr "等待第一次掃描後的回覆"
-
-#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115
-#: setupwizard.cpp:315 setupwizard.cpp:333
-msgid " ms"
-msgstr " 毫秒"
-
-#: setupwizard.cpp:316
-msgid ""
-"How long should LISa wait for answers to pings?"
-"<br>If LISa doesn't find all hosts, try to increase this value."
-"<br>"
-msgstr "LISa 應該等待 ping 的結果多久？<br> 如果 LISa 無法發現所有的主機，試著增加這個值。<br>"
-
-#: setupwizard.cpp:320
-msgid "Max. number of pings to send at once"
-msgstr "同時送出 ping 封包的數字"
-
-#: setupwizard.cpp:323
-msgid ""
-"How many ping packets should LISa send at once?"
-"<br>If LISa doesn't find all hosts you could try to decrease this value."
-"<br>"
-msgstr "LISa 應該同時送出多少的 ping 封包？<br> 如果 LISa 無法發現所有的主機，試著減少這個值。<br>"
-
-#: setupwizard.cpp:326
-msgid "Al&ways scan twice"
-msgstr "總是掃描兩次(&W)"
-
-#: setupwizard.cpp:330
-msgid "Wait for replies after second scan"
-msgstr "等待第二次掃描後的回覆"
-
-#: setupwizard.cpp:334
-msgid "If LISa doesn't find all hosts, enable this option."
-msgstr "如果 LISa 無法發現所有的主機，試著開啟這個選項。"
-
-#: setupwizard.cpp:350
+#: _translatorinfo:1
 msgid ""
-"<br>Your LAN browsing has been successfully set up."
-"<br>"
-"<br>Make sure that the LISa server is started during the boot process. How this "
-"is done depends on your distribution and OS. Usually you have to insert it "
-"somewhere in a boot script under <code>/etc</code>."
-"<br>Start the LISa server as root and without any command line options."
-"<br>The config file will now be saved to <code>/etc/lisarc</code>."
-"<br>To test the server, try <code>lan:/</code> in Konqueror."
-"<br>"
-"<br>If you have problems or suggestions, visit "
-"http://lisa-home.sourceforge.net."
+"_: NAME OF TRANSLATORS\n"
+"Your names"
 msgstr ""
-"<br>成功地建立了您的區域網路瀏覽。"
-"<br>"
-"<br>請確定lisa 伺服器已在 boot 過程中被啟動。如何完成啟動端視您的版本和作業系統。通常您必需在<code>/etc</code>"
-"下的 boot script 的某處插入設定。"
-"<br>以 root 身份啟動 lisa 伺服器，並且不要其它的命令列選項。"
-"<br>設定檔將被儲存於<code>/etc/lisarc</code>。"
-"<br>然後像在 Konqueror 中試試<code>lan:/</code>並且祝玩得愉快！:-)"
-"<br>"
-"<br>如果您有任何問題或建議，請參觀 http://lisa-home.sourceforge.net 。"
-
-#: setupwizard.cpp:437
-msgid "Congratulations!"
-msgstr "恭喜！"
 
-#: setupwizard.cpp:462
-msgid "You can use the same syntax as on the previous page.<br>"
-msgstr "您可以使用如同上一頁的相同語法。<br>"
-
-#: setupwizard.cpp:464
+#: _translatorinfo:2
 msgid ""
-"There are three ways to specify IP addresses:"
-"<br>1. IP address/network mask, like<code> 192.168.0.0/255.255.255.0;</code>"
-"<br>2. continuous ranges, like<code> 10.0.1.0-10.0.1.200;</code>"
-"<br>3. single IP addresses, like<code> 10.0.0.23;</code>"
-"<br>You can also enter combinations of 1 to 3, separated by \";\", "
-"<br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
-"<br>"
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
 msgstr ""
-"這裡有三個方法去指定 IP 位址："
-"<br> 1. IP 位址/網路遮罩，像是<code>192.168.0.0/255.255.255.0</code>。"
-"<br> 2. 連續範圍，像是<code> 10.0.1.0-10.0.1.200</code>。"
-"<br> 3. 單一 IP 位址，像是<code> 10.0.0.23</code>。"
-"<br> 您也可以輸入 1 到 3 的組合，其中以\";\"隔開"
-"<br> 像是<code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100</code>。"
-"<br>"
 
-#: setupwizard.cpp:490
-msgid "Multiple Network Interfaces Found"
-msgstr "發現多個網路介面"
+#: findnic.cpp:107 findnic.cpp:174
+msgid "Up"
+msgstr "上"
 
-#: setupwizard.cpp:493
-msgid "No Network Interface Found"
-msgstr "沒有發現網路介面"
+#: findnic.cpp:109 findnic.cpp:176
+msgid "Down"
+msgstr "下"
 
-#: setupwizard.cpp:498
-msgid "Specify Search Method"
-msgstr "指定搜尋方式"
+#: findnic.cpp:112 findnic.cpp:280
+msgid "Broadcast"
+msgstr "廣播"
 
-#: setupwizard.cpp:501
-msgid "Specify Address Range LISa Will Ping"
-msgstr "指定位址範圍給 LISa 檢測"
+#: findnic.cpp:114 findnic.cpp:273
+msgid "Point to Point"
+msgstr "點對點"
 
-#: setupwizard.cpp:504
-msgid "\"Trusted\" Hosts"
-msgstr "\"可信賴的\"主機"
+#: findnic.cpp:117 findnic.cpp:287
+msgid "Multicast"
+msgstr "Multicast"
 
-#: setupwizard.cpp:507
-msgid "Your Broadcast Address"
-msgstr "您的廣播位址"
+#: findnic.cpp:120 findnic.cpp:294
+msgid "Loopback"
+msgstr "Loopback"
 
-#: setupwizard.cpp:510
-msgid "LISa Update Interval"
-msgstr "LISa 更新時間間隔"
+#: findnic.cpp:122 findnic.cpp:134
+msgid "Unknown"
+msgstr "未知的"
 
 #: kcmlisa.cpp:63
 msgid "Tell LISa Daemon How to Search for Hosts"
@@ -354,7 +86,9 @@ msgstr "掃描這些位址(&I)："
 msgid ""
 "Enter all ranges to scan, using the format "
 "'192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0'"
-msgstr "輸入所有掃描的範圍，使用的格式為 '192.168.0.1/255.255.255.255.0;10.0.0.1;255.0.0.0'。"
+msgstr ""
+"輸入所有掃描的範圍，使用的格式為 "
+"'192.168.0.1/255.255.255.255.0;10.0.0.1;255.0.0.0'。"
 
 #: kcmlisa.cpp:88
 msgid "&Broadcast network address:"
@@ -409,6 +143,10 @@ msgstr "主機清單更新間隔："
 msgid "Search hosts after this number of seconds"
 msgstr "在幾秒後搜尋主機"
 
+#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284
+msgid " sec"
+msgstr " 秒"
+
 #: kcmlisa.cpp:141 kcmreslisa.cpp:103
 msgid "Always check twice for hosts when searching"
 msgstr "搜尋時檢查主機兩次"
@@ -422,6 +160,11 @@ msgstr "等待第一次掃描後的回覆："
 msgid "How long to wait for replies to the ICMP echo requests from hosts"
 msgstr "花多久的時間等待主機的 ICMP 回應要求的結果"
 
+#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115
+#: setupwizard.cpp:315 setupwizard.cpp:333
+msgid " ms"
+msgstr " 毫秒"
+
 #: kcmlisa.cpp:150 kcmreslisa.cpp:112
 msgid "Wait for replies from hosts after second scan:"
 msgstr "等待第二次掃描後的回覆："
@@ -440,13 +183,12 @@ msgstr "沒有發現網路介面。"
 
 #: kcmlisa.cpp:332 kcmreslisa.cpp:232
 msgid ""
-"You have more than one network interface installed."
-"<br>Please make sure the suggested settings are correct."
-"<br>"
-"<br>The following interfaces were found:"
-"<br>"
-"<br>"
-msgstr "您安裝了一個以上的網路介面。<br> 請確定建議的設定值是正確的。<br><br> 發現以下的介面：<br><br>"
+"You have more than one network interface installed.<br>Please make sure the "
+"suggested settings are correct.<br><br>The following interfaces were found:"
+"<br><br>"
+msgstr ""
+"您安裝了一個以上的網路介面。<br> 請確定建議的設定值是正確的。<br><br> 發現以"
+"下的介面：<br><br>"
 
 #: kcmlisa.cpp:381
 msgid ""
@@ -498,9 +240,11 @@ msgstr "您似乎沒有安裝任何網路介面裝置在您的系統上。"
 
 #: kcmreslisa.cpp:242
 msgid ""
-"The ResLISa daemon is now configured correctly, hopefully."
-"<br>Make sure that the reslisa binary is installed <i>suid root</i>."
-msgstr "希望 ResLISa 守護程式現在已經被正確地設定了。<br> 請確定 reslisa 執行檔已裝好並設定為 suid root。"
+"The ResLISa daemon is now configured correctly, hopefully.<br>Make sure that "
+"the reslisa binary is installed <i>suid root</i>."
+msgstr ""
+"希望 ResLISa 守護程式現在已經被正確地設定了。<br> 請確定 reslisa 執行檔已裝好"
+"並設定為 suid root。"
 
 #: kcmtdeiolan.cpp:41
 msgid "Show Links for Following Services"
@@ -546,30 +290,279 @@ msgstr "永遠"
 msgid "Never"
 msgstr "永不"
 
-#: findnic.cpp:107 findnic.cpp:174
-msgid "Up"
-msgstr "上"
+#: setupwizard.cpp:63
+msgid "LISa Network Neighborhood Setup"
+msgstr "LISa 網路芳鄰設定"
 
-#: findnic.cpp:109 findnic.cpp:176
-msgid "Down"
-msgstr "下"
+#: setupwizard.cpp:71 setupwizard.cpp:512
+msgid "Advanced Settings"
+msgstr "進階設定"
 
-#: findnic.cpp:112 findnic.cpp:280
-msgid "Broadcast"
-msgstr "廣播"
+#: setupwizard.cpp:126
+msgid ""
+"<qt><p>This wizard will ask you a few questions about your network.</p> "
+"<p>Usually you can simply keep the suggested settings.</p> <p>After you have "
+"finished the wizard, you will be able to browse and use shared resources on "
+"your LAN, not only Samba/Windows shares, but also FTP, HTTP and NFS "
+"resources exactly the same way.</p> <p>Therefore you need to setup the "
+"<i>LAN Information Server</i> (LISa) on your machine. Think of the LISa "
+"server as an FTP or HTTP server; it has to be run by root, it should be "
+"started during the boot process and only one LISa server can run on one "
+"machine.</qt>"
+msgstr ""
+"<qt><p>這個精靈將會問您一點點關於您網路的問題。</p><p>通常您可以簡單地保留建"
+"議設定。</p><p>在您結束這個精靈之後，您將可以瀏覽並且使用在您區域網路上分享的"
+"資源，不只是 Samba/Windows 的分享，還有 FTP, HTTP 和 NFS 的資源。</p><p>因此"
+"您需要在您的機器上設定<i>區域網路資訊伺服器</i>(LISa)。將 LISa 當作像是 FTP "
+"或 HTTP 伺服器一樣，它可以以 root 身份來執行，它應該在 boot 時期被啟動，並且"
+"一部機器只跑一個 LISa server 。</p></qt>"
 
-#: findnic.cpp:114 findnic.cpp:273
-msgid "Point to Point"
-msgstr "點對點"
+#: setupwizard.cpp:149
+msgid ""
+"<qt><p>More than one network interface card was found on your system.</"
+"p><p>Please choose the one to which your LAN is connected.</p></qt>"
+msgstr ""
+"<qt><p>在您的機器上發現超過一張以上的網路卡。</p><p>請選擇您的區域網路有連結"
+"的那一張。</p></qt>"
 
-#: findnic.cpp:117 findnic.cpp:287
-msgid "Multicast"
-msgstr "Multicast"
+#: setupwizard.cpp:164
+msgid ""
+"<qt><p><b>No network interface card was found on your system.</b></"
+"p><p>Possible reason: no network card is installed. You probably want to "
+"cancel now or enter your IP address and network manually</p>Example: "
+"<code>192.168.0.1/255.255.255.0</code>.</qt>"
+msgstr ""
+"<qt><p><b>在您的機器上沒有發現網路卡。</b></p><p>可能的理由：沒有安裝網路卡。"
+"您現在也許想要離開，或是手動地輸入您的 IP 位址和網路設定。</p>例如："
+"<code>192.168.0.1/255.255.255.0</code>。</qt>"
 
-#: findnic.cpp:120 findnic.cpp:294
-msgid "Loopback"
-msgstr "Loopback"
+#: setupwizard.cpp:185
+msgid "There are two ways LISa can search hosts on your network."
+msgstr "LISa 在您的網路上有兩個可以搜尋主機的方法。"
 
-#: findnic.cpp:122 findnic.cpp:134
-msgid "Unknown"
-msgstr "未知的"
+#: setupwizard.cpp:187
+msgid "Send pings"
+msgstr "送出 pings"
+
+#: setupwizard.cpp:188
+msgid ""
+"All hosts with TCP/IP will respond,<br>whether or not they are samba servers."
+"<br>Don't use it if your network is very large, i.e. more than 1000 hosts."
+"<br>"
+msgstr ""
+"所有 TCP/IP 的主機將回應，<br> 不論他們是否是 samba 伺服器。<br> 如果您的網路"
+"非常大，例如，超過 1000 台主機，請不要使用。<br>"
+
+#: setupwizard.cpp:191
+msgid "Send NetBIOS broadcasts"
+msgstr "送出 NetBIOS 廣播"
+
+#: setupwizard.cpp:192
+msgid ""
+"You need to have the samba package (nmblookup) installed.<br>Only samba/"
+"windows servers will respond.<br>This method is not very reliable.<br>You "
+"should enable it if you are part of a large network."
+msgstr ""
+"您需要安裝 samba 套件(nmblookup)。<br> 只有 samba/windows 伺服器會回應。<br> "
+"這個方法並不十分可靠。<br> 但是如果您所在的網路很大，您應該用此選項。"
+
+#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249
+#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340
+msgid "<b>If unsure, keep it as is.</b>"
+msgstr "<b>如果不確定，保持原狀。</b>"
+
+#: setupwizard.cpp:210
+msgid ""
+"All IP addresses included in the specified range will be pinged.<br>If you "
+"are part of a small network, e.g. with network mask 255.255.255.0<br>use "
+"your IP address/network mask.<br>"
+msgstr ""
+"所有包含在指定範圍內的 IP 位址將會被測試。<br> 如果您是一個小型網路的一部分，"
+"例如，網路遮罩為 255.255.255.0，<br> 則請使用您的 IP 位址/網路遮罩。<br>"
+
+#: setupwizard.cpp:215
+msgid ""
+"<br>There are four ways to specify address ranges:<br>1. IP address/network "
+"mask, like <code>192.168.0.0/255.255.255.0;</code><br>2. single IP "
+"addresses, like <code>10.0.0.23;</code><br>3. continuous ranges, like "
+"<code>10.0.1.0-10.0.1.200;</code><br>4. ranges for each part of the address, "
+"like <code>10-10.1-5.1-25.1-3;</code><br>You can also enter combinations of "
+"1 to 4, separated by \";\", "
+"like<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</"
+"code><br>"
+msgstr ""
+"<br>有四個方法來指定位址範圍：<br> 1. IP 位址/網路遮罩，像是"
+"<code>192.168.0.0/255.255.255.0</code>。<br> 2. 單一 IP 位址，像是"
+"<code>10.0.0.23</code>。<br> 3. 連續的範圍，例如<code>10.0.1.0-10.0.1.200</"
+"code>。<br> 4. 位址每個部份的範圍，像是<code>10-10.1-5.1-25.1-3</code>。<br> "
+"您也可以輸入 1 到 4 的組合，使用\";\"分開，<br> 像是"
+"<code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100</code><br>"
+
+#: setupwizard.cpp:236
+msgid ""
+"This is a security related setting.<br>It provides a simple IP address based "
+"way to specify \"trusted\" hosts.<br>Only hosts which fit into the addresses "
+"given here are accepted by LISa as clients. The list of hosts published by "
+"LISa will also only contain hosts which fit into this scheme.<br>Usually you "
+"enter your IP address/network mask here."
+msgstr ""
+"這是一個安全相關的設定。<br>它提供一個簡易的以 IP 位址為基礎的方式來指定\"被"
+"信任的\"主機。<br>只有這裡提供的合適位址才會被客戶端的 LISa 所接受。由 LISa "
+"所發佈的主機列表也只包含適合這項計劃的主機。<br>通常您可在這兒輸入您的 IP 位"
+"址/網路遮罩。"
+
+#: setupwizard.cpp:258
+msgid ""
+"<br>Enter your IP address and network mask here, like "
+"<code>192.168.0.1/255.255.255.0</code>"
+msgstr ""
+"<br>在這兒輸入您的 IP 位址和網路遮罩，像是<code>192.168.0.1/255.255.255.0</"
+"code>"
+
+#: setupwizard.cpp:261
+msgid ""
+"<br>To reduce the network load, the LISa servers in one network<br>cooperate "
+"with each other. Therefore you have to enter the broadcast<br>address here. "
+"If you are connected to more than one network, choose <br>one of the "
+"broadcast addresses."
+msgstr ""
+"<br>為了減少網路負載，在網路上的 LISa 伺服器<br>會彼此合作。因此您可以在此輸"
+"入廣播位址。<br>如果您連結一個以上的網路，請選則其中一個<br>廣播位址。"
+
+#: setupwizard.cpp:280
+msgid ""
+"<br>Enter the interval after which LISa, if busy, will update its host list."
+msgstr "<br>輸入當 LISa 忙碌時，下一次更新主機列表的時間間隔。"
+
+#: setupwizard.cpp:286
+msgid ""
+"<br>Please note that the update interval will grow automatically by up to 16 "
+"times the value you enter here, if nobody accesses the LISa server. So if "
+"you enter 300 sec = 5 min here, this does not mean that LISa will ping your "
+"whole network every 5 minutes. The interval will increase up to 16 x 5 min = "
+"80 min."
+msgstr ""
+"<br>請注意，若是都沒有人去存取 LISa 伺服器，更新間隔會自動拉大到您所輸入數值"
+"的十六倍。若是您輸入 300 秒（五分鐘），這並不表示 LISa 會每五分鐘 ping 一次您"
+"的網路。最大可能會 5x16=80 分鐘才會 ping 一次。"
+
+#: setupwizard.cpp:305
+msgid ""
+"This page contains several settings you usually only<br>need if LISa doesn't "
+"find all hosts in your network."
+msgstr "如果 LISa 無法在您的網路上發現所有主機，<br>本頁包含一些您需要的設定。"
+
+#: setupwizard.cpp:308
+msgid "Re&port unnamed hosts"
+msgstr "回覆未命名的主機(&P)"
+
+#: setupwizard.cpp:309
+msgid ""
+"Should hosts for which LISa can't resolve the name be included in the host "
+"list?<br>"
+msgstr "LISa 無法分析的主機名稱的主機，該被包含在主機列表裡嗎？<br>"
+
+#: setupwizard.cpp:313
+msgid "Wait for replies after first scan"
+msgstr "等待第一次掃描後的回覆"
+
+#: setupwizard.cpp:316
+msgid ""
+"How long should LISa wait for answers to pings?<br>If LISa doesn't find all "
+"hosts, try to increase this value.<br>"
+msgstr ""
+"LISa 應該等待 ping 的結果多久？<br> 如果 LISa 無法發現所有的主機，試著增加這"
+"個值。<br>"
+
+#: setupwizard.cpp:320
+msgid "Max. number of pings to send at once"
+msgstr "同時送出 ping 封包的數字"
+
+#: setupwizard.cpp:323
+msgid ""
+"How many ping packets should LISa send at once?<br>If LISa doesn't find all "
+"hosts you could try to decrease this value.<br>"
+msgstr ""
+"LISa 應該同時送出多少的 ping 封包？<br> 如果 LISa 無法發現所有的主機，試著減"
+"少這個值。<br>"
+
+#: setupwizard.cpp:326
+msgid "Al&ways scan twice"
+msgstr "總是掃描兩次(&W)"
+
+#: setupwizard.cpp:330
+msgid "Wait for replies after second scan"
+msgstr "等待第二次掃描後的回覆"
+
+#: setupwizard.cpp:334
+msgid "If LISa doesn't find all hosts, enable this option."
+msgstr "如果 LISa 無法發現所有的主機，試著開啟這個選項。"
+
+#: setupwizard.cpp:350
+msgid ""
+"<br>Your LAN browsing has been successfully set up.<br><br>Make sure that "
+"the LISa server is started during the boot process. How this is done depends "
+"on your distribution and OS. Usually you have to insert it somewhere in a "
+"boot script under <code>/etc</code>.<br>Start the LISa server as root and "
+"without any command line options.<br>The config file will now be saved to "
+"<code>/etc/lisarc</code>.<br>To test the server, try <code>lan:/</code> in "
+"Konqueror.<br><br>If you have problems or suggestions, visit http://lisa-"
+"home.sourceforge.net."
+msgstr ""
+"<br>成功地建立了您的區域網路瀏覽。<br><br>請確定lisa 伺服器已在 boot 過程中被"
+"啟動。如何完成啟動端視您的版本和作業系統。通常您必需在<code>/etc</code>下的 "
+"boot script 的某處插入設定。<br>以 root 身份啟動 lisa 伺服器，並且不要其它的"
+"命令列選項。<br>設定檔將被儲存於<code>/etc/lisarc</code>。<br>然後像在 "
+"Konqueror 中試試<code>lan:/</code>並且祝玩得愉快！:-)<br><br>如果您有任何問題"
+"或建議，請參觀 http://lisa-home.sourceforge.net 。"
+
+#: setupwizard.cpp:437
+msgid "Congratulations!"
+msgstr "恭喜！"
+
+#: setupwizard.cpp:462
+msgid "You can use the same syntax as on the previous page.<br>"
+msgstr "您可以使用如同上一頁的相同語法。<br>"
+
+#: setupwizard.cpp:464
+msgid ""
+"There are three ways to specify IP addresses:<br>1. IP address/network mask, "
+"like<code> 192.168.0.0/255.255.255.0;</code><br>2. continuous ranges, "
+"like<code> 10.0.1.0-10.0.1.200;</code><br>3. single IP addresses, like<code> "
+"10.0.0.23;</code><br>You can also enter combinations of 1 to 3, separated by "
+"\";\", <br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;"
+"</code><br>"
+msgstr ""
+"這裡有三個方法去指定 IP 位址：<br> 1. IP 位址/網路遮罩，像是"
+"<code>192.168.0.0/255.255.255.0</code>。<br> 2. 連續範圍，像是<code> "
+"10.0.1.0-10.0.1.200</code>。<br> 3. 單一 IP 位址，像是<code> 10.0.0.23</"
+"code>。<br> 您也可以輸入 1 到 3 的組合，其中以\";\"隔開<br> 像是"
+"<code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100</code>。<br>"
+
+#: setupwizard.cpp:490
+msgid "Multiple Network Interfaces Found"
+msgstr "發現多個網路介面"
+
+#: setupwizard.cpp:493
+msgid "No Network Interface Found"
+msgstr "沒有發現網路介面"
+
+#: setupwizard.cpp:498
+msgid "Specify Search Method"
+msgstr "指定搜尋方式"
+
+#: setupwizard.cpp:501
+msgid "Specify Address Range LISa Will Ping"
+msgstr "指定位址範圍給 LISa 檢測"
+
+#: setupwizard.cpp:504
+msgid "\"Trusted\" Hosts"
+msgstr "\"可信賴的\"主機"
+
+#: setupwizard.cpp:507
+msgid "Your Broadcast Address"
+msgstr "您的廣播位址"
+
+#: setupwizard.cpp:510
+msgid "LISa Update Interval"
+msgstr "LISa 更新時間間隔"