diff options
Diffstat (limited to 'tde-i18n-en_GB/missing')
| -rwxr-xr-x | tde-i18n-en_GB/missing | 346 |
1 files changed, 0 insertions, 346 deletions
diff --git a/tde-i18n-en_GB/missing b/tde-i18n-en_GB/missing deleted file mode 100755 index d55d3ad42ff..00000000000 --- a/tde-i18n-en_GB/missing +++ /dev/null @@ -1,346 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2004-09-07.08 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to <bug-automake@gnu.org>." - exit 0 - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit 0 - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 |