diff options
Diffstat (limited to 'tde-i18n-eu/install-sh')
| -rwxr-xr-x | tde-i18n-eu/install-sh | 401 |
1 files changed, 401 insertions, 0 deletions
diff --git a/tde-i18n-eu/install-sh b/tde-i18n-eu/install-sh new file mode 100755 index 00000000000..0ae12c0ebea --- /dev/null +++ b/tde-i18n-eu/install-sh @@ -0,0 +1,401 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2005-11-07.23 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +posix_glob= +posix_mkdir= + +# Symbolic mode for testing mkdir with directories. +# It is the same as 755, but also tests that "u+" works. +test_mode=u=rwx,g=rx,o=rx,u+wx + +# Desired mode of installed file. +mode=0755 + +# Desired mode of newly created intermediate directories. +# It is empty if not known yet. +intermediate_mode= + +chmodcmd=$chmodprog +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15 + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + posix_mkdir=false + if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then + posix_mkdir=true + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null + fi ;; + esac + + if + $posix_mkdir && { + + # With -d, create the new directory with the user-specified mode. + # Otherwise, create it using the same intermediate mode that + # mkdir -p would use when creating intermediate directories. + # POSIX says that this mode is "$(umask -S),u+wx", so use that + # if umask -S works. + + if test -n "$dir_arg"; then + mkdir_mode=$mode + else + case $intermediate_mode in + '') + if umask_S=`(umask -S) 2>/dev/null`; then + intermediate_mode=$umask_S,u+wx + else + intermediate_mode=$test_mode + fi ;; + esac + mkdir_mode=$intermediate_mode + fi + + $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" + } + then : + else + + # mkdir does not conform to POSIX, or it failed possibly due to + # a race condition. Create the directory the slow way, step by + # step, checking for races as we go. + + case $dstdir in + /*) pathcomp=/ ;; + -*) pathcomp=./ ;; + *) pathcomp= ;; + esac + + case $posix_glob in + '') + if (set -f) 2>/dev/null; then + posix_glob=true + else + posix_glob=false + fi ;; + esac + + oIFS=$IFS + IFS=/ + $posix_glob && set -f + set fnord $dstdir + shift + $posix_glob && set +f + IFS=$oIFS + + for d + do + test "x$d" = x && continue + + pathcomp=$pathcomp$d + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # Don't fail if two instances are running concurrently. + test -d "$pathcomp" || exit 1 + fi + pathcomp=$pathcomp/ + done + obsolete_mkdir_used=true + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dst"; then + $doit $rmcmd -f "$dst" 2>/dev/null \ + || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ + && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ + || { + echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + } || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: |