summaryrefslogtreecommitdiffstats
path: root/tde-i18n-fr/messages/tdebase/ksysguard.po
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-fr/messages/tdebase/ksysguard.po')
-rw-r--r--tde-i18n-fr/messages/tdebase/ksysguard.po1742
1 files changed, 1742 insertions, 0 deletions
diff --git a/tde-i18n-fr/messages/tdebase/ksysguard.po b/tde-i18n-fr/messages/tdebase/ksysguard.po
new file mode 100644
index 00000000000..b7ec0fa5587
--- /dev/null
+++ b/tde-i18n-fr/messages/tdebase/ksysguard.po
@@ -0,0 +1,1742 @@
+# translation of ksysguard.po to Français
+# translation of ksysguard.po to
+# traduction de ksysguard.po en français
+# traduction de ksysguard.po en Français
+#
+# Gérard Delafond <gerard@delafond.org>, 2002, 2004.
+# Matthieu Robin <kde@macolu.org>, 2003, 2005, 2006.
+# Yann Verley <yann.verley@free.fr>, 2004, 2005.
+# Nicolas Ternisien <nicolas.ternisien@gmail.com>, 2005.
+# Pierre Buard <pierre.buard@gmail.com>, 2008.
+# Copyright (C) 2002, 2003, 2004, 2005, 2006, 2008 Free Software Foundation, Inc.
+msgid ""
+msgstr ""
+"Project-Id-Version: ksysguard\n"
+"POT-Creation-Date: 2008-07-08 01:18+0200\n"
+"PO-Revision-Date: 2008-08-05 17:29+0200\n"
+"Last-Translator: Pierre Buard <pierre.buard@gmail.com>\n"
+"Language-Team: Français <kde-francophone@kde.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: KSysGuardApplet.cc:318 WorkSheet.cc:94
+#, c-format
+msgid "Cannot open the file %1."
+msgstr "Impossible d'ouvrir le fichier « %1 »."
+
+#: KSysGuardApplet.cc:327 WorkSheet.cc:102
+msgid "The file %1 does not contain valid XML."
+msgstr "Le fichier « %1 » n'est pas un fichier XML valable."
+
+#: WorkSheet.cc:109
+msgid ""
+"The file %1 does not contain a valid worksheet definition, which must have a "
+"document type 'KSysGuardWorkSheet'."
+msgstr ""
+"Le fichier « %1 » ne contient pas de définition de feuille de données valable, "
+"dont le type doit être « KSysGuardWorkSheet »."
+
+#: WorkSheet.cc:125
+msgid "The file %1 has an invalid worksheet size."
+msgstr "Le fichier « %1 » a une taille de feuille de données non valable."
+
+#: KSysGuardApplet.cc:476 WorkSheet.cc:225
+#, c-format
+msgid "Cannot save file %1"
+msgstr "Impossible d'enregistrer le fichier « %1 »"
+
+#: WorkSheet.cc:273
+msgid "The clipboard does not contain a valid display description."
+msgstr "Le presse-papiers ne contient aucune description d'affichage valable."
+
+#: SensorDisplayLib/SensorDisplay.cc:104 WorkSheet.cc:315
+msgid "It is impossible to connect to '%1'."
+msgstr "Impossible de se connecter à « %1 »."
+
+#: KSysGuardApplet.cc:209 WorkSheet.cc:331
+msgid "Select Display Type"
+msgstr "Choisissez un type d'affichage"
+
+#: KSysGuardApplet.cc:210 WorkSheet.cc:332
+msgid "&Signal Plotter"
+msgstr "&Traceur"
+
+#: KSysGuardApplet.cc:211 WorkSheet.cc:333
+msgid "&Multimeter"
+msgstr "&Multimètre"
+
+#: WorkSheet.cc:334
+msgid "&BarGraph"
+msgstr "Graphe en &barres"
+
+#: WorkSheet.cc:335
+msgid "S&ensorLogger"
+msgstr "Journal de capt&eur"
+
+#: ksgrd/SensorAgent.cc:88
+msgid ""
+"Message from %1:\n"
+"%2"
+msgstr ""
+"Message de %1 :\n"
+"%2"
+
+#: ksgrd/TimerSettings.cc:36
+msgid "Timer Settings"
+msgstr "Configuration du temps"
+
+#: ksgrd/TimerSettings.cc:43
+msgid "Use update interval of worksheet"
+msgstr "Utiliser l'intervalle de rafraîchissement de la feuille de données"
+
+#: KSGAppletSettings.cc:59 WorkSheetSettings.cc:85 ksgrd/TimerSettings.cc:46
+msgid "Update interval:"
+msgstr "Intervalle de rafraîchissement :"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 68
+#: KSGAppletSettings.cc:64 WorkSheetSettings.cc:91 ksgrd/TimerSettings.cc:51
+#: rc.cpp:21
+#, no-c-format
+msgid " sec"
+msgstr " sec"
+
+#: WorkSheetSettings.cc:99 ksgrd/TimerSettings.cc:54
+msgid "All displays of the sheet are updated at the rate specified here."
+msgstr ""
+"Tous les affichages de la feuille de données seront rafraîchis à la vitesse "
+"indiquée ici."
+
+#: ksgrd/HostConnector.cc:37
+msgid "Connect Host"
+msgstr "Se connecter à un hôte"
+
+#: ksgrd/HostConnector.cc:44
+msgid "Host:"
+msgstr "Hôte :"
+
+#: ksgrd/HostConnector.cc:54
+msgid "Enter the name of the host you want to connect to."
+msgstr "Saisissez ici le nom de l'hôte auquel vous voulez vous connecter."
+
+#: ksgrd/HostConnector.cc:61
+msgid "Connection Type"
+msgstr "Type de connexion"
+
+#: ksgrd/HostConnector.cc:66
+msgid "ssh"
+msgstr "ssh"
+
+#: ksgrd/HostConnector.cc:69
+msgid "Select this to use the secure shell to login to the remote host."
+msgstr ""
+"Si vous cochez cette option, le Secure SHell sera utilisé pour établir la "
+"connexion à l'hôte distant."
+
+#: ksgrd/HostConnector.cc:72
+msgid "rsh"
+msgstr "rsh"
+
+#: ksgrd/HostConnector.cc:73
+msgid "Select this to use the remote shell to login to the remote host."
+msgstr ""
+"Si vous cochez cette option, le Remote SHell sera utilisé pour établir la "
+"connexion à l'hôte distant."
+
+#: ksgrd/HostConnector.cc:76
+msgid "Daemon"
+msgstr "Démon"
+
+#: ksgrd/HostConnector.cc:77
+msgid ""
+"Select this if you want to connect to a ksysguard daemon that is running on the "
+"machine you want to connect to, and is listening for client requests."
+msgstr ""
+"Cochez cette option si l'hôte auquel vous voulez vous connecter dispose d'un "
+"démon KSysGuardD en fonctionnement et que vous voulez l'utiliser pour établir "
+"la connexion."
+
+#: ksgrd/HostConnector.cc:80
+msgid "Custom command"
+msgstr "Commande personnalisée"
+
+#: ksgrd/HostConnector.cc:81
+msgid ""
+"Select this to use the command you entered below to start ksysguardd on the "
+"remote host."
+msgstr ""
+"Cochez cette option pour que la commande saisie ci-dessous soit utilisée pour "
+"démarrer le démon KSysGuardD sur l'hôte distant."
+
+#: ksgrd/HostConnector.cc:84
+msgid "Port:"
+msgstr "Port :"
+
+#: ksgrd/HostConnector.cc:90
+msgid ""
+"Enter the port number on which the ksysguard daemon is listening for "
+"connections."
+msgstr ""
+"Saisissez le numéro de port que le démon KSysGuard surveille pour les "
+"connexions."
+
+#: ksgrd/HostConnector.cc:93
+msgid "e.g. 3112"
+msgstr "par exemple 3112"
+
+#: ksgrd/HostConnector.cc:96
+msgid "Command:"
+msgstr "Commande :"
+
+#: ksgrd/HostConnector.cc:105
+msgid "Enter the command that runs ksysguardd on the host you want to monitor."
+msgstr ""
+"Saisissez la commande démarrant KSysGuardD sur l'hôte auquel vous voulez vous "
+"connecter."
+
+#: ksgrd/HostConnector.cc:109
+msgid "e.g. ssh -l root remote.host.org ksysguardd"
+msgstr "par exemple SSH -l root hote.distant.org ksysguardd"
+
+#: ksgrd/StyleSettings.cc:41
+msgid "Global Style Settings"
+msgstr "Configuration du style global"
+
+#: ksgrd/StyleSettings.cc:44
+msgid "Display Style"
+msgstr "Style d'affichage"
+
+#: ksgrd/StyleSettings.cc:47
+msgid "First foreground color:"
+msgstr "Première couleur de premier plan :"
+
+#: ksgrd/StyleSettings.cc:54
+msgid "Second foreground color:"
+msgstr "Seconde couleur de premier plan :"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerSettingsWidget.ui line 107
+#: ksgrd/StyleSettings.cc:61 rc.cpp:126
+#, no-c-format
+msgid "Alarm color:"
+msgstr "Couleur d'alarme :"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 241
+#: SensorDisplayLib/DancingBarsSettings.cc:143 SensorDisplayLib/LogFile.cc:90
+#: ksgrd/StyleSettings.cc:68 rc.cpp:96 rc.cpp:111 rc.cpp:123 rc.cpp:144
+#, no-c-format
+msgid "Background color:"
+msgstr "Couleur de fond :"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:150
+#: SensorDisplayLib/FancyPlotterSettings.cc:176 ksgrd/StyleSettings.cc:75
+msgid "Font size:"
+msgstr "Taille de la police :"
+
+#: ksgrd/StyleSettings.cc:85
+msgid "Sensor Colors"
+msgstr "Couleurs des capteurs"
+
+#: ksgrd/StyleSettings.cc:91
+msgid "Change Color..."
+msgstr "Modifier la couleur..."
+
+#: ksgrd/StyleSettings.cc:166
+#, c-format
+msgid "Color %1"
+msgstr "Couleur %1"
+
+#. i18n: file SystemLoad.sgrd line 5
+#: ksgrd/SensorManager.cc:50 rc.cpp:173
+msgid "CPU Load"
+msgstr "Charge CPU"
+
+#: ksgrd/SensorManager.cc:51
+msgid "Idle Load"
+msgstr "Charge inactifs"
+
+#: Workspace.cc:100 Workspace.cc:109 ksgrd/SensorManager.cc:52
+#: ksysguard.cc:171
+msgid "System Load"
+msgstr "Charge système"
+
+#: ksgrd/SensorManager.cc:53
+msgid "Nice Load"
+msgstr "Charge courtoisie"
+
+#: ksgrd/SensorManager.cc:54
+msgid "User Load"
+msgstr "Charge utilisateur"
+
+#: ksgrd/SensorManager.cc:55
+msgid "Memory"
+msgstr "Mémoire"
+
+#. i18n: file SystemLoad.sgrd line 13
+#: ksgrd/SensorManager.cc:56 rc.cpp:177
+msgid "Physical Memory"
+msgstr "Mémoire physique"
+
+#. i18n: file SystemLoad.sgrd line 21
+#: ksgrd/SensorManager.cc:57 rc.cpp:179
+msgid "Swap Memory"
+msgstr "Mémoire d'échange"
+
+#: ksgrd/SensorManager.cc:58
+msgid "Cached Memory"
+msgstr "Mémoire en cache"
+
+#: ksgrd/SensorManager.cc:59
+msgid "Buffered Memory"
+msgstr "Mémoire tampon"
+
+#: ksgrd/SensorManager.cc:60
+msgid "Used Memory"
+msgstr "Mémoire utilisée"
+
+#: ksgrd/SensorManager.cc:61
+msgid "Application Memory"
+msgstr "Mémoire pour les applications"
+
+#: ksgrd/SensorManager.cc:62
+msgid "Free Memory"
+msgstr "Mémoire libre"
+
+#: ksgrd/SensorManager.cc:63
+msgid "Process Count"
+msgstr "Nombre de processus"
+
+#: ksgrd/SensorManager.cc:64 ksgrd/SensorManager.cc:148
+msgid "Process Controller"
+msgstr "Contrôleur de processus"
+
+#: ksgrd/SensorManager.cc:65
+msgid "Disk Throughput"
+msgstr "Débit disque"
+
+#: ksgrd/SensorManager.cc:66
+msgid ""
+"_: CPU Load\n"
+"Load"
+msgstr "Charge"
+
+#: ksgrd/SensorManager.cc:67
+msgid "Total Accesses"
+msgstr "Accès"
+
+#: ksgrd/SensorManager.cc:68
+msgid "Read Accesses"
+msgstr "Accès en lecture"
+
+#: ksgrd/SensorManager.cc:69
+msgid "Write Accesses"
+msgstr "Accès en écriture"
+
+#: ksgrd/SensorManager.cc:70
+msgid "Read Data"
+msgstr "Données lues"
+
+#: ksgrd/SensorManager.cc:71
+msgid "Write Data"
+msgstr "Données écrites"
+
+#: ksgrd/SensorManager.cc:72
+msgid "Pages In"
+msgstr "Pages entrantes"
+
+#: ksgrd/SensorManager.cc:73
+msgid "Pages Out"
+msgstr "Pages sortantes"
+
+#: ksgrd/SensorManager.cc:74
+msgid "Context Switches"
+msgstr "Changements de contexte"
+
+#: ksgrd/SensorManager.cc:75
+msgid "Network"
+msgstr "Réseau"
+
+#: ksgrd/SensorManager.cc:76
+msgid "Interfaces"
+msgstr "Interfaces"
+
+#: ksgrd/SensorManager.cc:77
+msgid "Receiver"
+msgstr "Récepteur"
+
+#: ksgrd/SensorManager.cc:78
+msgid "Transmitter"
+msgstr "Émetteur"
+
+#: ksgrd/SensorManager.cc:79
+msgid "Data"
+msgstr "Données"
+
+#: ksgrd/SensorManager.cc:80
+msgid "Compressed Packets"
+msgstr "Paquets compressés"
+
+#: ksgrd/SensorManager.cc:81
+msgid "Dropped Packets"
+msgstr "Paquets abandonnés"
+
+#: ksgrd/SensorManager.cc:82
+msgid "Errors"
+msgstr "Erreurs"
+
+#: ksgrd/SensorManager.cc:83
+msgid "FIFO Overruns"
+msgstr "Débordements de file"
+
+#: ksgrd/SensorManager.cc:84
+msgid "Frame Errors"
+msgstr "Erreurs de frame"
+
+#: ksgrd/SensorManager.cc:85
+msgid "Multicast"
+msgstr "Multicast"
+
+#: ksgrd/SensorManager.cc:86
+msgid "Packets"
+msgstr "Paquets"
+
+#: ksgrd/SensorManager.cc:87
+msgid "Carrier"
+msgstr "Porteuse"
+
+#: ksgrd/SensorManager.cc:88
+msgid "Collisions"
+msgstr "Collisions"
+
+#: ksgrd/SensorManager.cc:89
+msgid "Sockets"
+msgstr "Sockets"
+
+#: ksgrd/SensorManager.cc:90
+msgid "Total Number"
+msgstr "Nombre total"
+
+#: ksgrd/SensorManager.cc:91 ksgrd/SensorManager.cc:149
+msgid "Table"
+msgstr "Table"
+
+#: ksgrd/SensorManager.cc:92
+msgid "Advanced Power Management"
+msgstr "Gestion avancée de l'énergie (APM)"
+
+#: ksgrd/SensorManager.cc:93
+msgid "ACPI"
+msgstr "ACPI"
+
+#: ksgrd/SensorManager.cc:94
+msgid "Thermal Zone"
+msgstr "Zone thermale"
+
+#: ksgrd/SensorManager.cc:95
+msgid "Temperature"
+msgstr "Température "
+
+#: ksgrd/SensorManager.cc:96
+msgid "Fan"
+msgstr "Ventilateur "
+
+#: ksgrd/SensorManager.cc:97
+msgid "State"
+msgstr "État"
+
+#: ksgrd/SensorManager.cc:98
+msgid "Battery"
+msgstr "Batterie"
+
+#: ksgrd/SensorManager.cc:99
+msgid "Battery Charge"
+msgstr "Charge de la batterie"
+
+#: ksgrd/SensorManager.cc:100
+msgid "Battery Usage"
+msgstr "Usage de la batterie"
+
+#: ksgrd/SensorManager.cc:101
+msgid "Remaining Time"
+msgstr "Temps restant"
+
+#: ksgrd/SensorManager.cc:102
+msgid "Interrupts"
+msgstr "Interruptions"
+
+#. i18n: file SystemLoad.sgrd line 10
+#: ksgrd/SensorManager.cc:103 rc.cpp:175
+msgid "Load Average (1 min)"
+msgstr "Charge moyenne (sur 1 min.)"
+
+#: ksgrd/SensorManager.cc:104
+msgid "Load Average (5 min)"
+msgstr "Charge moyenne (sur 5 min.)"
+
+#: ksgrd/SensorManager.cc:105
+msgid "Load Average (15 min)"
+msgstr "Charge moyenne (sur 15 min.)"
+
+#: ksgrd/SensorManager.cc:106
+msgid "Clock Frequency"
+msgstr "Fréquence d'horloge"
+
+#: ksgrd/SensorManager.cc:107
+msgid "Hardware Sensors"
+msgstr "Capteurs matériels"
+
+#: ksgrd/SensorManager.cc:108
+msgid "Partition Usage"
+msgstr "Utilisation de la partition"
+
+#: ksgrd/SensorManager.cc:109
+msgid "Used Space"
+msgstr "Espace utilisé"
+
+#: ksgrd/SensorManager.cc:110
+msgid "Free Space"
+msgstr "Espace libre"
+
+#: ksgrd/SensorManager.cc:111
+msgid "Fill Level"
+msgstr "Niveau de remplissage"
+
+#: ksgrd/SensorManager.cc:115
+#, c-format
+msgid "CPU%1"
+msgstr "Processeur %1"
+
+#: ksgrd/SensorManager.cc:117
+#, c-format
+msgid "Disk%1"
+msgstr "Disque %1"
+
+#: ksgrd/SensorManager.cc:122
+#, c-format
+msgid "Fan%1"
+msgstr "Ventilateur %1"
+
+#: ksgrd/SensorManager.cc:124
+#, c-format
+msgid "Temperature%1"
+msgstr "Température %1"
+
+#: ksgrd/SensorManager.cc:127
+msgid "Total"
+msgstr "Total"
+
+#: ksgrd/SensorManager.cc:133
+#, c-format
+msgid "Int%1"
+msgstr "Int%1"
+
+#: ksgrd/SensorManager.cc:140
+msgid ""
+"_: the unit 1 per second\n"
+"1/s"
+msgstr "1/s"
+
+#: ksgrd/SensorManager.cc:141
+msgid "kBytes"
+msgstr "ko"
+
+#: ksgrd/SensorManager.cc:142
+msgid ""
+"_: the unit minutes\n"
+"min"
+msgstr "min."
+
+#: ksgrd/SensorManager.cc:143
+msgid ""
+"_: the frequency unit\n"
+"MHz"
+msgstr "MHz"
+
+#: ksgrd/SensorManager.cc:146
+msgid "Integer Value"
+msgstr "Valeur entière"
+
+#: ksgrd/SensorManager.cc:147
+msgid "Floating Point Value"
+msgstr "Valeur réelle"
+
+#: ksgrd/SensorManager.cc:289
+msgid "Connection to %1 has been lost."
+msgstr "La connexion à %1 a été coupée."
+
+#: ksgrd/SensorSocketAgent.cc:104
+msgid "Connection to %1 refused"
+msgstr "La connexion à %1 a été refusée"
+
+#: ksgrd/SensorSocketAgent.cc:108
+msgid "Host %1 not found"
+msgstr "Impossible de trouver l'hôte %1"
+
+#: ksgrd/SensorSocketAgent.cc:112
+#, c-format
+msgid "Timeout at host %1"
+msgstr "Délai dépassé pour l'hôte %1"
+
+#: ksgrd/SensorSocketAgent.cc:116
+#, c-format
+msgid "Network failure host %1"
+msgstr "Échec de connexion réseau vers l'hôte %1"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "François-Xavier Duranceau,Thibaut Cousin,Yann Verley,Nicolas Ternisien"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+"duranceau@kde.org,cousin@kde.org,yann.verley@free.fr,"
+"nicolas.ternisien@gmail.com"
+
+#: Workspace.cc:53
+msgid ""
+"This is your work space. It holds your worksheets. You need to create a new "
+"worksheet (Menu File->New) before you can drag sensors here."
+msgstr ""
+"Ceci est votre espace de travail. Il contient vos feuilles de données. Vous "
+"devez créer une nouvelle feuille de données (menu Fichier->"
+"Nouveau) avant de pouvoir glisser-déposer des capteurs ici."
+
+#: Workspace.cc:105 ksysguard.cc:176
+msgid "Process Table"
+msgstr "Table des processus"
+
+#: Workspace.cc:135
+#, c-format
+msgid "Sheet %1"
+msgstr "Feuille %1"
+
+#: Workspace.cc:165 Workspace.cc:305
+msgid ""
+"The worksheet '%1' contains unsaved data.\n"
+"Do you want to save the worksheet?"
+msgstr ""
+"La feuille « %1 » contient des données non enregistrées. \n"
+"Voulez-vous l'enregistrer ?"
+
+#: Workspace.cc:181 Workspace.cc:235
+msgid "*.sgrd|Sensor Files"
+msgstr "*.sgrd|Fichiers de capteurs"
+
+#: Workspace.cc:184
+msgid "Select Worksheet to Load"
+msgstr "Sélectionner une feuille de données à ouvrir"
+
+#: Workspace.cc:229 Workspace.cc:269
+msgid "You do not have a worksheet that could be saved."
+msgstr "Aucune feuille de données ne peut être enregistrée."
+
+#: Workspace.cc:239
+msgid "Save Current Worksheet As"
+msgstr "Enregistrer la feuille de données actuelle sous"
+
+#: Workspace.cc:320
+msgid "There are no worksheets that could be deleted."
+msgstr "Aucune feuille de données ne peut être supprimée."
+
+#: Workspace.cc:448
+msgid "Cannot find file ProcessTable.sgrd."
+msgstr "Impossible de trouver le fichier ProcessTable.sgrd."
+
+#: KSGAppletSettings.cc:34
+msgid "System Guard Settings"
+msgstr "Configuration du surveillant système"
+
+#: KSGAppletSettings.cc:42
+msgid "Number of displays:"
+msgstr "Nombre d'affichages :"
+
+#: KSGAppletSettings.cc:50
+msgid "Size ratio:"
+msgstr "Rapport de taille :"
+
+#: KSGAppletSettings.cc:54
+#, c-format
+msgid "%"
+msgstr "%"
+
+#: SensorDisplayLib/ProcessList.cc:110
+msgid ""
+"_: process status\n"
+"running"
+msgstr "en exécution"
+
+#: SensorDisplayLib/ProcessList.cc:112
+msgid ""
+"_: process status\n"
+"sleeping"
+msgstr "arrêté"
+
+#: SensorDisplayLib/ProcessList.cc:114
+msgid ""
+"_: process status\n"
+"disk sleep"
+msgstr "disque arrêté"
+
+#: SensorDisplayLib/ProcessList.cc:115
+msgid ""
+"_: process status\n"
+"zombie"
+msgstr "zombie"
+
+#: SensorDisplayLib/ProcessList.cc:117
+msgid ""
+"_: process status\n"
+"stopped"
+msgstr "arrêté"
+
+#: SensorDisplayLib/ProcessList.cc:118
+msgid ""
+"_: process status\n"
+"paging"
+msgstr "pagination"
+
+#: SensorDisplayLib/ProcessList.cc:119
+msgid ""
+"_: process status\n"
+"idle"
+msgstr "inactif"
+
+#: SensorDisplayLib/ProcessList.cc:250
+msgid "Remove Column"
+msgstr "Supprimer la colonne"
+
+#: SensorDisplayLib/ProcessList.cc:251
+msgid "Add Column"
+msgstr "Ajouter une colonne"
+
+#: SensorDisplayLib/ProcessList.cc:252
+msgid "Help on Column"
+msgstr "Aide sur la colonne"
+
+#: SensorDisplayLib/ProcessController.cc:62
+#: SensorDisplayLib/ProcessList.cc:771
+msgid "Nice"
+msgstr "Courtoisie"
+
+#: SensorDisplayLib/ProcessList.cc:776
+msgid "Hide Column"
+msgstr "Masquer la colonne"
+
+#: SensorDisplayLib/ProcessList.cc:782
+msgid "Show Column"
+msgstr "Afficher la colonne"
+
+#: SensorDisplayLib/ProcessList.cc:786
+msgid "Select All Processes"
+msgstr "Sélectionner tous les processus"
+
+#: SensorDisplayLib/ProcessList.cc:787
+msgid "Unselect All Processes"
+msgstr "Désélectionner tous les processus"
+
+#: SensorDisplayLib/ProcessList.cc:793
+msgid "Select All Child Processes"
+msgstr "Sélectionner tous les processus enfants"
+
+#: SensorDisplayLib/ProcessList.cc:794
+msgid "Unselect All Child Processes"
+msgstr "Désélectionner tous les processus enfants"
+
+#: SensorDisplayLib/ProcessList.cc:796
+msgid "SIGABRT"
+msgstr "SIGABRT"
+
+#: SensorDisplayLib/ProcessList.cc:797
+msgid "SIGALRM"
+msgstr "SIGALRM"
+
+#: SensorDisplayLib/ProcessList.cc:798
+msgid "SIGCHLD"
+msgstr "SIGCHLD"
+
+#: SensorDisplayLib/ProcessList.cc:799
+msgid "SIGCONT"
+msgstr "SIGCONT"
+
+#: SensorDisplayLib/ProcessList.cc:800
+msgid "SIGFPE"
+msgstr "SIGFPE"
+
+#: SensorDisplayLib/ProcessList.cc:801
+msgid "SIGHUP"
+msgstr "SIGHUP"
+
+#: SensorDisplayLib/ProcessList.cc:802
+msgid "SIGILL"
+msgstr "SIGILL"
+
+#: SensorDisplayLib/ProcessList.cc:803
+msgid "SIGINT"
+msgstr "SIGINT"
+
+#: SensorDisplayLib/ProcessList.cc:804
+msgid "SIGKILL"
+msgstr "SIGKILL"
+
+#: SensorDisplayLib/ProcessList.cc:805
+msgid "SIGPIPE"
+msgstr "SIGPIPE"
+
+#: SensorDisplayLib/ProcessList.cc:806
+msgid "SIGQUIT"
+msgstr "SIGQUIT"
+
+#: SensorDisplayLib/ProcessList.cc:807
+msgid "SIGSEGV"
+msgstr "SIGSEGV"
+
+#: SensorDisplayLib/ProcessList.cc:808
+msgid "SIGSTOP"
+msgstr "SIGSTOP"
+
+#: SensorDisplayLib/ProcessList.cc:809
+msgid "SIGTERM"
+msgstr "SIGTERM"
+
+#: SensorDisplayLib/ProcessList.cc:810
+msgid "SIGTSTP"
+msgstr "SIGTSTP"
+
+#: SensorDisplayLib/ProcessList.cc:811
+msgid "SIGTTIN"
+msgstr "SIGTTIN"
+
+#: SensorDisplayLib/ProcessList.cc:812
+msgid "SIGTTOU"
+msgstr "SIGTTOU"
+
+#: SensorDisplayLib/ProcessList.cc:813
+msgid "SIGUSR1"
+msgstr "SIGUSR1"
+
+#: SensorDisplayLib/ProcessList.cc:814
+msgid "SIGUSR2"
+msgstr "SIGUSR2"
+
+#: SensorDisplayLib/ProcessList.cc:817
+msgid "Send Signal"
+msgstr "Envoyer un signal"
+
+#: SensorDisplayLib/ProcessList.cc:825
+msgid "Renice Process..."
+msgstr "Modifier la courtoisie du processus..."
+
+#: SensorDisplayLib/ProcessList.cc:873
+msgid ""
+"_n: Do you really want to send signal %1 to the selected process?\n"
+"Do you really want to send signal %1 to the %n selected processes?"
+msgstr ""
+"Voulez-vous vraiment envoyer le signal %1 au processus sélectionné ?\n"
+"Voulez-vous vraiment envoyer le signal %1 aux %n processus sélectionnés ?"
+
+#: SensorDisplayLib/ProcessList.cc:877
+msgid "Send"
+msgstr "Envoyer"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:43
+msgid "Edit BarGraph Preferences"
+msgstr "Modifier la configuration du graphe en barres"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:47
+msgid "Range"
+msgstr "Plage"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 25
+#: SensorDisplayLib/DancingBarsSettings.cc:50 WorkSheetSettings.cc:48
+#: rc.cpp:48 rc.cpp:99 rc.cpp:114 rc.cpp:135
+#, no-c-format
+msgid "Title"
+msgstr "Titre"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 36
+#: SensorDisplayLib/DancingBarsSettings.cc:54
+#: SensorDisplayLib/FancyPlotterSettings.cc:64 rc.cpp:51
+#, no-c-format
+msgid "Enter the title of the display here."
+msgstr "Saisissez ici le titre de l'afficheur."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:59
+msgid "Display Range"
+msgstr "Plage d'affichage"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:63
+#: SensorDisplayLib/FancyPlotterSettings.cc:89
+msgid "Minimum value:"
+msgstr "Valeur minimale :"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:67
+#: SensorDisplayLib/FancyPlotterSettings.cc:95
+msgid ""
+"Enter the minimum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Saisissez ici la valeur minimale pour l'affichage. Si les deux valeurs sont à "
+"0, la détection automatique de zone est activée."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:71
+#: SensorDisplayLib/FancyPlotterSettings.cc:99
+msgid "Maximum value:"
+msgstr "Valeur maximale :"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:75
+#: SensorDisplayLib/FancyPlotterSettings.cc:105
+msgid ""
+"Enter the maximum value for the display here. If both values are 0, automatic "
+"range detection is enabled."
+msgstr ""
+"Saisissez la valeur maximale pour l'affichage ici. Si les deux valeurs sont à "
+"0, la détection automatique de zone est activée."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 61
+#: SensorDisplayLib/DancingBarsSettings.cc:84 rc.cpp:60
+#, no-c-format
+msgid "Alarms"
+msgstr "Alarmes"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 78
+#: SensorDisplayLib/DancingBarsSettings.cc:87 rc.cpp:24 rc.cpp:75
+#, no-c-format
+msgid "Alarm for Minimum Value"
+msgstr "Alarme de valeur minimale"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:91
+#: SensorDisplayLib/DancingBarsSettings.cc:109
+msgid "Enable alarm"
+msgstr "Activer l'alarme"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 92
+#: SensorDisplayLib/DancingBarsSettings.cc:92 rc.cpp:30 rc.cpp:81
+#, no-c-format
+msgid "Enable the minimum value alarm."
+msgstr "Activer l'alarme de valeur minimale."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 120
+#: SensorDisplayLib/DancingBarsSettings.cc:95 rc.cpp:33 rc.cpp:84
+#, no-c-format
+msgid "Lower limit:"
+msgstr "Limite inférieure :"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 144
+#: SensorDisplayLib/DancingBarsSettings.cc:105 rc.cpp:36 rc.cpp:63
+#, no-c-format
+msgid "Alarm for Maximum Value"
+msgstr "Alarme de valeur maximale"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 158
+#: SensorDisplayLib/DancingBarsSettings.cc:110 rc.cpp:42 rc.cpp:69
+#, no-c-format
+msgid "Enable the maximum value alarm."
+msgstr "Activer l'alarme de valeur maximale."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 186
+#: SensorDisplayLib/DancingBarsSettings.cc:113 rc.cpp:45 rc.cpp:72
+#, no-c-format
+msgid "Upper limit:"
+msgstr "Limite supérieure :"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:126
+msgid "Look"
+msgstr "Apparence"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:129
+msgid "Normal bar color:"
+msgstr "Couleur normale des barres :"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:136
+msgid "Out-of-range color:"
+msgstr "Couleur en cas de sortie de plage :"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:154
+msgid ""
+"This determines the size of the font used to print a label underneath the bars. "
+"Bars are automatically suppressed if text becomes too large, so it is advisable "
+"to use a small font size here."
+msgstr ""
+"Cela détermine la taille de la police utilisée pour afficher une légende sous "
+"les barres. Ces dernières sont automatiquement supprimées si le texte est trop "
+"long, choisissez donc une police assez petite."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:161
+#: SensorDisplayLib/FancyPlotterSettings.cc:224
+msgid "Sensors"
+msgstr "Capteurs"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:166
+#: SensorDisplayLib/FancyPlotterSettings.cc:231
+msgid "Host"
+msgstr "Hôte"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:167
+#: SensorDisplayLib/FancyPlotterSettings.cc:232
+msgid "Sensor"
+msgstr "Capteur"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:168
+msgid "Label"
+msgstr "Légende"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:169
+#: SensorDisplayLib/FancyPlotterSettings.cc:233
+msgid "Unit"
+msgstr "Unité"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:170
+#: SensorDisplayLib/FancyPlotterSettings.cc:234
+#: SensorDisplayLib/ProcessController.cc:59
+msgid "Status"
+msgstr "État"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:174
+msgid "Edit..."
+msgstr "Modifier..."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:176
+msgid "Push this button to configure the label."
+msgstr "Cliquez sur ce bouton pour déterminer la légende."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:181
+#: SensorDisplayLib/FancyPlotterSettings.cc:249
+msgid "Push this button to delete the sensor."
+msgstr "Cliquez sur ce bouton pour supprimer le capteur."
+
+#: SensorDisplayLib/DancingBarsSettings.cc:356
+msgid "Label of Bar Graph"
+msgstr "Légende du graphe en barres"
+
+#: SensorDisplayLib/DancingBarsSettings.cc:357
+msgid "Enter new label:"
+msgstr "Saisissez une nouvelle légende :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:47
+msgid "Signal Plotter Settings"
+msgstr "Configuration du traceur"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:57
+msgid "Style"
+msgstr "Style"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:60
+msgid "Title:"
+msgstr "Titre :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:69
+msgid "Graph Drawing Style"
+msgstr "Présentation par graphe"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:71
+msgid "Basic polygons"
+msgstr "Polygones simples"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:73
+msgid "Original - single line per data point"
+msgstr "Classique (une seule ligne par point de donnée)"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:78
+msgid "Scales"
+msgstr "Échelles"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:81
+msgid "Vertical Scale"
+msgstr "Échelle verticale"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:85
+msgid "Automatic range detection"
+msgstr "Détection automatique de la plage"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:86
+msgid ""
+"Check this box if you want the display range to adapt dynamically to the "
+"currently displayed values; if you do not check this, you have to specify the "
+"range you want in the fields below."
+msgstr ""
+"Cochez cette case si vous voulez que la plage d'affichage s'adapte "
+"dynamiquement aux valeurs affichées. Si vous ne cochez pas cette option, vous "
+"devrez indiquer la plage désirée ci-dessous."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:111
+msgid "Horizontal Scale"
+msgstr "Échelle horizontale"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:120
+msgid "pixel(s) per time period"
+msgstr "pixel(s) par intervalle de temps"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:126
+msgid "Grid"
+msgstr "Grille"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:129
+msgid "Lines"
+msgstr "Lignes"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:133
+msgid "Vertical lines"
+msgstr "Lignes verticales"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:134
+msgid "Check this to activate the vertical lines if display is large enough."
+msgstr ""
+"Cochez cette option pour afficher des lignes verticales si l'affichage est "
+"assez grand."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:137
+msgid "Distance:"
+msgstr "Distance :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:143
+msgid "Enter the distance between two vertical lines here."
+msgstr "Saisissez ici la distance entre deux lignes verticales."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:147
+msgid "Vertical lines scroll"
+msgstr "Défilement des lignes verticales"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:150
+msgid "Horizontal lines"
+msgstr "Lignes horizontales"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:151
+msgid "Check this to enable horizontal lines if display is large enough."
+msgstr ""
+"Cochez cette option pour afficher des lignes horizontales si l'affichage est "
+"assez large."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:154
+msgid "Count:"
+msgstr "Nombre :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:160
+msgid "Enter the number of horizontal lines here."
+msgstr "Saisissez ici le nombre de lignes horizontales."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 35
+#: SensorDisplayLib/FancyPlotterSettings.cc:168 rc.cpp:132
+#, no-c-format
+msgid "Text"
+msgstr "Texte"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:172
+msgid "Labels"
+msgstr "Légendes"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:173
+msgid ""
+"Check this box if horizontal lines should be decorated with the values they "
+"mark."
+msgstr ""
+"Cochez cette case si vous voulez que les valeurs qu'elles représentent soient "
+"affichées sur les lignes horizontales."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:185
+msgid "Top bar"
+msgstr "Barre de titre"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:186
+msgid ""
+"Check this to active the display title bar. This is probably only useful for "
+"applet displays. The bar is only visible if the display is large enough."
+msgstr ""
+"Cochez cette option pour afficher la barre de titre. Cela n'est probablement "
+"utile que pour les applets. La barre ne sera réellement affichée que s'il y a "
+"la place."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 206
+#: SensorDisplayLib/FancyPlotterSettings.cc:193 rc.cpp:87 rc.cpp:102
+#: rc.cpp:117 rc.cpp:138
+#, no-c-format
+msgid "Colors"
+msgstr "Couleurs"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:196
+msgid "Vertical lines:"
+msgstr "Lignes verticales :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:203
+msgid "Horizontal lines:"
+msgstr "Lignes horizontales :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:210
+msgid "Background:"
+msgstr "Fond :"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:242
+msgid "Set Color..."
+msgstr "Choisir la couleur..."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:244
+msgid "Push this button to configure the color of the sensor in the diagram."
+msgstr ""
+"Cliquez sur ce bouton pour choisir la couleur à utiliser pour le capteur dans "
+"l'affichage."
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:252
+msgid "Move Up"
+msgstr "Déplacer vers le haut"
+
+#: SensorDisplayLib/FancyPlotterSettings.cc:256
+msgid "Move Down"
+msgstr "Déplacer vers le bas"
+
+#: SensorDisplayLib/SensorLogger.cc:151 SensorDisplayLib/SensorLoggerDlg.cc:28
+msgid "Sensor Logger"
+msgstr "Journalisation des capteurs"
+
+#: SensorDisplayLib/SensorDisplay.cc:162
+msgid "Launch &System Guard"
+msgstr "Démarrer le &surveillant système"
+
+#: SensorDisplayLib/SensorDisplay.cc:166 SensorDisplayLib/SensorLogger.cc:380
+msgid "&Properties"
+msgstr "&Propriétés"
+
+#: SensorDisplayLib/SensorDisplay.cc:167 SensorDisplayLib/SensorLogger.cc:381
+msgid "&Remove Display"
+msgstr "&Supprimer l'affichage"
+
+#: SensorDisplayLib/SensorDisplay.cc:169
+msgid "&Setup Update Interval..."
+msgstr "Inter&valle de rafraîchissement..."
+
+#: SensorDisplayLib/SensorDisplay.cc:171
+msgid "&Continue Update"
+msgstr "&Poursuivre le rafraîchissement"
+
+#: SensorDisplayLib/SensorDisplay.cc:173
+msgid "P&ause Update"
+msgstr "In&terrompre le rafraîchissement"
+
+#: SensorDisplayLib/SensorDisplay.cc:240
+msgid ""
+"<qt>"
+"<p>This is a sensor display. To customize a sensor display click and hold the "
+"right mouse button on either the frame or the display box and select the <i>"
+"Properties</i> entry from the popup menu. Select <i>Remove</i> "
+"to delete the display from the worksheet.</p>%1</qt>"
+msgstr ""
+"<qt>"
+"<p>Ceci est l'afficheur d'un capteur. Pour le personnaliser, cliquez avec le "
+"bouton droit de la souris soit sur le cadre, soit dans l'affichage et maintenez "
+"le bouton enfoncé, puis cliquez sur <i>Propriétés</i> "
+"dans le menu contextuel. Sélectionnez <i>Supprimer l'affichage</i> "
+"pour supprimer cet afficheur de la feuille de données.</p>%1</qt>"
+
+#: SensorDisplayLib/SensorLogger.cc:136
+msgid "Logging"
+msgstr "Journalisation"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 48
+#: SensorDisplayLib/SensorLogger.cc:137 rc.cpp:18
+#, no-c-format
+msgid "Timer Interval"
+msgstr "Intervalle de temps"
+
+#: SensorDisplayLib/SensorLogger.cc:138
+msgid "Sensor Name"
+msgstr "Nom du capteur"
+
+#: SensorDisplayLib/SensorLogger.cc:139
+msgid "Host Name"
+msgstr "Nom d'hôte"
+
+#: SensorDisplayLib/SensorLogger.cc:140
+msgid "Log File"
+msgstr "Fichier journal"
+
+#: SensorDisplayLib/SensorLogger.cc:383
+msgid "&Remove Sensor"
+msgstr "&Supprimer le capteur"
+
+#: SensorDisplayLib/SensorLogger.cc:384
+msgid "&Edit Sensor..."
+msgstr "&Modifier le capteur..."
+
+#: SensorDisplayLib/SensorLogger.cc:396
+msgid "St&op Logging"
+msgstr "A&rrêter la journalisation"
+
+#: SensorDisplayLib/SensorLogger.cc:398
+msgid "S&tart Logging"
+msgstr "&Démarrer la journalisation"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 94
+#: SensorDisplayLib/LogFile.cc:88 rc.cpp:141
+#, no-c-format
+msgid "Foreground color:"
+msgstr "Couleur du texte :"
+
+#: SensorDisplayLib/MultiMeterSettings.cc:26
+msgid "Multimeter Settings"
+msgstr "Configuration du multimètre"
+
+#: SensorDisplayLib/ListViewSettings.cc:26
+msgid "List View Settings"
+msgstr "Configuration de la vue en liste"
+
+#: SensorDisplayLib/ReniceDlg.cc:32
+msgid "Renice Process"
+msgstr "Modifier la courtoisie du processus"
+
+#: SensorDisplayLib/ReniceDlg.cc:40
+msgid ""
+"You are about to change the scheduling priority of\n"
+"process %1. Be aware that only the Superuser (root)\n"
+"can decrease the nice level of a process. The lower\n"
+"the number is the higher the priority.\n"
+"\n"
+"Please enter the desired nice level:"
+msgstr ""
+"Vous allez modifier la priorité d'ordonnancement du\n"
+"processus %1. Seul le superutilisateur peut\n"
+"diminuer la courtoisie d'un processus.\n"
+"Plus le nombre est petit, plus la priorité est élevée.\n"
+"\n"
+"Saisissez la courtoisie désirée :"
+
+#: SensorDisplayLib/SensorLoggerSettings.cc:26
+msgid "Sensor Logger Settings"
+msgstr "Configuration de la journalisation des capteurs"
+
+#: SensorDisplayLib/DummyDisplay.cc:33
+msgid "Drop Sensor Here"
+msgstr "Déposez un capteur ici"
+
+#: SensorDisplayLib/DummyDisplay.cc:38
+msgid ""
+"This is an empty space in a worksheet. Drag a sensor from the Sensor Browser "
+"and drop it here. A sensor display will appear that allows you to monitor the "
+"values of the sensor over time."
+msgstr ""
+"Ceci est un emplacement vide dans une feuille de données. Tirez un capteur du "
+"navigateur de capteurs et lâchez-le ici. Un affichage de capteur apparaîtra, "
+"vous permettant de surveiller l'évolution des valeurs du capteur dans le temps."
+
+#: SensorDisplayLib/ProcessController.cc:54
+msgid "Name"
+msgstr "Nom"
+
+#: SensorDisplayLib/ProcessController.cc:55
+msgid "PID"
+msgstr "PID"
+
+#: SensorDisplayLib/ProcessController.cc:56
+msgid "PPID"
+msgstr "PPID"
+
+#: SensorDisplayLib/ProcessController.cc:57
+msgid "UID"
+msgstr "UID"
+
+#: SensorDisplayLib/ProcessController.cc:58
+msgid "GID"
+msgstr "GID"
+
+#: SensorDisplayLib/ProcessController.cc:60
+#, c-format
+msgid "User%"
+msgstr "% utilisateur"
+
+#: SensorDisplayLib/ProcessController.cc:61
+#, c-format
+msgid "System%"
+msgstr "% système"
+
+#: SensorDisplayLib/ProcessController.cc:63
+msgid "VmSize"
+msgstr "VmSize"
+
+#: SensorDisplayLib/ProcessController.cc:64
+msgid "VmRss"
+msgstr "VmRss"
+
+#: SensorDisplayLib/ProcessController.cc:65
+msgid "Login"
+msgstr "Utilisateur"
+
+#: SensorDisplayLib/ProcessController.cc:66
+msgid "Command"
+msgstr "Commande"
+
+#: SensorDisplayLib/ProcessController.cc:97
+msgid "All Processes"
+msgstr "Tous les processus"
+
+#: SensorDisplayLib/ProcessController.cc:98
+msgid "System Processes"
+msgstr "Processus système"
+
+#: SensorDisplayLib/ProcessController.cc:99
+msgid "User Processes"
+msgstr "Processus utilisateur"
+
+#: SensorDisplayLib/ProcessController.cc:100
+msgid "Own Processes"
+msgstr "Processus personnels"
+
+#: SensorDisplayLib/ProcessController.cc:103
+msgid "&Tree"
+msgstr "&Arborescence"
+
+#: SensorDisplayLib/ProcessController.cc:116
+msgid "&Refresh"
+msgstr "&Rafraîchir"
+
+#: SensorDisplayLib/ProcessController.cc:123
+msgid "&Kill"
+msgstr "&Tuer"
+
+#: SensorDisplayLib/ProcessController.cc:206
+msgid "%1: Running Processes"
+msgstr "%1 : processus en exécution"
+
+#: SensorDisplayLib/ProcessController.cc:239
+msgid "You need to select a process first."
+msgstr "Vous devez d'abord sélectionner un processus."
+
+#: SensorDisplayLib/ProcessController.cc:245
+#, c-format
+msgid ""
+"_n: Do you want to kill the selected process?\n"
+"Do you want to kill the %n selected processes?"
+msgstr ""
+"Voulez-vous tuer le processus sélectionné ?\n"
+"Voulez-vous tuer les %n processus sélectionnés ?"
+
+#: SensorDisplayLib/ProcessController.cc:248
+msgid "Kill Process"
+msgstr "Tuer le processus"
+
+#: SensorDisplayLib/ProcessController.cc:252
+msgid "Kill"
+msgstr "Tuer"
+
+#: SensorDisplayLib/ProcessController.cc:258
+msgid "Do not ask again"
+msgstr "Ne plus demander"
+
+#: SensorDisplayLib/ProcessController.cc:344
+#, c-format
+msgid "Error while attempting to kill process %1."
+msgstr "Problème en essayant de tuer le processus %1."
+
+#: SensorDisplayLib/ProcessController.cc:349
+#, c-format
+msgid "Insufficient permissions to kill process %1."
+msgstr "Permissions insuffisantes pour tuer le processus %1."
+
+#: SensorDisplayLib/ProcessController.cc:354
+#: SensorDisplayLib/ProcessController.cc:389
+msgid "Process %1 has already disappeared."
+msgstr "Le processus %1 n'existe plus."
+
+#: SensorDisplayLib/ProcessController.cc:358
+msgid "Invalid Signal."
+msgstr "Signal non valable."
+
+#: SensorDisplayLib/ProcessController.cc:379
+#, c-format
+msgid "Error while attempting to renice process %1."
+msgstr "Problème en essayant de modifier la courtoisie du processus %1."
+
+#: SensorDisplayLib/ProcessController.cc:384
+#, c-format
+msgid "Insufficient permissions to renice process %1."
+msgstr "Permissions insuffisantes pour modifier la courtoisie du processus %1."
+
+#: SensorDisplayLib/ProcessController.cc:393
+msgid "Invalid argument."
+msgstr "Argument non valable."
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 89
+#: rc.cpp:27 rc.cpp:78
+#, no-c-format
+msgid "&Enable alarm"
+msgstr "Activ&er l'alarme"
+
+#. i18n: file ./SensorDisplayLib/SensorLoggerDlgWidget.ui line 155
+#: rc.cpp:39 rc.cpp:66
+#, no-c-format
+msgid "E&nable alarm"
+msgstr "Activer l'alar&me"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 44
+#: rc.cpp:54
+#, no-c-format
+msgid "&Show unit"
+msgstr "Afficher les unité&s"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 47
+#: rc.cpp:57
+#, no-c-format
+msgid "Enable this to append the unit to the title of the display."
+msgstr "Cochez ceci pour ajouter l'unité au titre de l'affichage."
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 225
+#: rc.cpp:90
+#, no-c-format
+msgid "Normal digit color:"
+msgstr "Couleur normale des chiffres :"
+
+#. i18n: file ./SensorDisplayLib/MultiMeterSettingsWidget.ui line 233
+#: rc.cpp:93
+#, no-c-format
+msgid "Alarm digit color:"
+msgstr "Couleur des chiffres d'alarme :"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 82
+#: rc.cpp:105 rc.cpp:120
+#, no-c-format
+msgid "Text color:"
+msgstr "Couleur du texte :"
+
+#. i18n: file ./SensorDisplayLib/ListViewSettingsWidget.ui line 90
+#: rc.cpp:108
+#, no-c-format
+msgid "Grid color:"
+msgstr "Couleur du quadrillage :"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 17
+#: rc.cpp:129
+#, no-c-format
+msgid "Log File Settings"
+msgstr "Configuration du journal"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 187
+#: rc.cpp:150
+#, no-c-format
+msgid "Select Font..."
+msgstr "Sélectionner la police..."
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 199
+#: rc.cpp:153
+#, no-c-format
+msgid "Filter"
+msgstr "Filtre"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 238
+#: rc.cpp:156
+#, no-c-format
+msgid "&Add"
+msgstr "A&jouter"
+
+#. i18n: file ./SensorDisplayLib/LogFileSettings.ui line 254
+#: rc.cpp:162
+#, no-c-format
+msgid "&Change"
+msgstr "&Modifier"
+
+#. i18n: file KSysGuardApplet.xml line 5
+#: rc.cpp:181
+msgid "CPU"
+msgstr "Proc"
+
+#. i18n: file KSysGuardApplet.xml line 10
+#: rc.cpp:183
+msgid "Mem"
+msgstr "Mém"
+
+#: WorkSheetSettings.cc:41
+msgid "Worksheet Properties"
+msgstr "Propriétés de la feuille de données"
+
+#: WorkSheetSettings.cc:67
+msgid "Rows:"
+msgstr "Lignes :"
+
+#: WorkSheetSettings.cc:76
+msgid "Columns:"
+msgstr "Colonnes :"
+
+#: WorkSheetSettings.cc:97
+msgid "Enter the number of rows the sheet should have."
+msgstr "Saisissez ici le nombre de lignes de la feuille de données."
+
+#: WorkSheetSettings.cc:98
+msgid "Enter the number of columns the sheet should have."
+msgstr "Saisissez ici le nombre de colonnes de la feuille de données."
+
+#: WorkSheetSettings.cc:100
+msgid "Enter the title of the worksheet here."
+msgstr "Saisissez ici le titre de la feuille de données."
+
+#: KSysGuardApplet.cc:212
+msgid "&Dancing Bars"
+msgstr "Barres &dansantes"
+
+#: KSysGuardApplet.cc:242 KSysGuardApplet.cc:394
+msgid ""
+"The KSysGuard applet does not support displaying of this type of sensor. Please "
+"choose another sensor."
+msgstr ""
+"L'applet KSysGuard ne permet pas l'affichage de ce type de capteur. Veuillez en "
+"choisir un autre."
+
+#: KSysGuardApplet.cc:334
+msgid ""
+"The file %1 does not contain a valid applet definition, which must have a "
+"document type 'KSysGuardApplet'."
+msgstr ""
+"Le fichier « %1 » ne contient pas de définition d'applet valable, et dont le "
+"type de document doit être « KSysGuardApplet »."
+
+#: KSysGuardApplet.cc:488
+msgid "Drag sensors from the KDE System Guard into this cell."
+msgstr "Déposez des capteurs de KSysGuard dans cette cellule."
+
+#: SensorBrowser.cc:77
+msgid "Sensor Browser"
+msgstr "Navigateur de capteurs"
+
+#: SensorBrowser.cc:78
+msgid "Sensor Type"
+msgstr "Type de capteur"
+
+#: SensorBrowser.cc:81
+msgid "Drag sensors to empty cells of a worksheet or the panel applet."
+msgstr ""
+"Déposez les capteurs dans les emplacements vides des feuilles de données ou "
+"dans l'applet du tableau de bord."
+
+#: SensorBrowser.cc:88
+msgid ""
+"The sensor browser lists the connected hosts and the sensors that they provide. "
+"Click and drag sensors into drop zones of a worksheet or the panel applet. A "
+"display will appear that visualizes the values provided by the sensor. Some "
+"sensor displays can display values of multiple sensors. Simply drag other "
+"sensors on to the display to add more sensors."
+msgstr ""
+"Le navigateur de capteur liste les hôtes connectés et les capteurs qu'ils "
+"fournissent. Glissez les capteurs à la souris dans les cellules de la feuille "
+"de données. Un affichage apparaîtra afin de consulter les valeurs fournies par "
+"le capteur. Certains affichages de capteurs peuvent afficher des valeurs de "
+"plusieurs capteurs. Glissez-déposez simplement d'autres capteurs vers "
+"l'affichage pour les y ajouter."
+
+#: SensorBrowser.cc:148
+msgid "Drag sensors to empty fields in a worksheet."
+msgstr ""
+"Déposez les valeurs à mesurer dans les emplacements vides des feuilles de "
+"données."
+
+#: ksysguard.cc:64
+msgid "KDE system guard"
+msgstr "Surveillant système de KDE"
+
+#: ksysguard.cc:74 ksysguard.cc:556
+msgid "KDE System Guard"
+msgstr "Surveillant système de KDE"
+
+#: ksysguard.cc:100
+msgid "88888 Processes"
+msgstr "88888 processus"
+
+#: ksysguard.cc:101
+msgid "Memory: 88888888888 kB used, 88888888888 kB free"
+msgstr "Mémoire : 88888888888 ko utilisés, 88888888888 ko libres"
+
+#: ksysguard.cc:103
+msgid "Swap: 888888888 kB used, 888888888 kB free"
+msgstr "Partition d'échange : 888888888 ko utilisés, 888888888 ko libres"
+
+#: ksysguard.cc:108
+msgid "&New Worksheet..."
+msgstr "&Nouvelle feuille de travail..."
+
+#: ksysguard.cc:111
+msgid "Import Worksheet..."
+msgstr "Importer une feuille de travail..."
+
+#: ksysguard.cc:114
+msgid "&Import Recent Worksheet"
+msgstr "&Importer une feuille de travail récente"
+
+#: ksysguard.cc:117
+msgid "&Remove Worksheet"
+msgstr "&Supprimer la feuille de travail"
+
+#: ksysguard.cc:120
+msgid "&Export Worksheet..."
+msgstr "&Exporter la feuille de travail..."
+
+#: ksysguard.cc:125
+msgid "C&onnect Host..."
+msgstr "Se &connecter à l'hôte..."
+
+#: ksysguard.cc:127
+msgid "D&isconnect Host"
+msgstr "Se &déconnecter de l'hôte"
+
+#: ksysguard.cc:133
+msgid "&Worksheet Properties"
+msgstr "&Propriétés de la feuille de données"
+
+#: ksysguard.cc:136
+msgid "Load Standard Sheets"
+msgstr "Charger les feuilles standard"
+
+#: ksysguard.cc:140
+msgid "Configure &Style..."
+msgstr "Configurer le &style..."
+
+#: ksysguard.cc:157
+msgid "Do you really want to restore the default worksheets?"
+msgstr "Voulez-vous vraiment restaurer les feuilles de données par défaut ?"
+
+#: ksysguard.cc:158
+msgid "Reset All Worksheets"
+msgstr "Réinitialiser toutes les feuilles de travail"
+
+#: ksysguard.cc:159
+msgid "Reset"
+msgstr "Aucun filtre"
+
+#: ksysguard.cc:436
+#, c-format
+msgid ""
+"_n: 1 Process\n"
+"%n Processes"
+msgstr ""
+"1 processus\n"
+"%n processus"
+
+#: ksysguard.cc:446
+msgid "Memory: %1 %2 used, %3 %4 free"
+msgstr "Mémoire : %1 %2 utilisés, %3 %4 libres"
+
+#: ksysguard.cc:504
+msgid "No swap space available"
+msgstr "Plus d'espace d'échange disponible"
+
+#: ksysguard.cc:506
+msgid "Swap: %1 %2 used, %3 %4 free"
+msgstr "Échange : %1 %2 utilisés, %3 %4 libres"
+
+#: ksysguard.cc:515
+msgid "Show only process list of local host"
+msgstr "N'afficher que la liste des processus locaux"
+
+#: ksysguard.cc:516
+msgid "Optional worksheet files to load"
+msgstr "Fichiers de feuilles de données optionnels à ouvrir"
+
+#: ksysguard.cc:558
+msgid "(c) 1996-2002 The KSysGuard Developers"
+msgstr "(c) 1996-2002 Les développeurs de KSysGuard"
+
+#: ksysguard.cc:566
+msgid ""
+"Solaris Support\n"
+"Parts derived (by permission) from the sunos5\n"
+"module of William LeFebvre's \"top\" utility."
+msgstr ""
+"Prise en charge de Solaris\n"
+"Parties dérivées (avec la permission) du module\n"
+"sunos5 de l'utilitaire « top » de William LeFebvre."