diff options
Diffstat (limited to 'tde-i18n-ga/messages/tdegraphics')
| -rw-r--r-- | tde-i18n-ga/messages/tdegraphics/kdvi.po | 646 |
1 files changed, 326 insertions, 320 deletions
diff --git a/tde-i18n-ga/messages/tdegraphics/kdvi.po b/tde-i18n-ga/messages/tdegraphics/kdvi.po index 8c94bb54d4a..63a55a768ba 100644 --- a/tde-i18n-ga/messages/tdegraphics/kdvi.po +++ b/tde-i18n-ga/messages/tdegraphics/kdvi.po @@ -1,7 +1,7 @@ msgid "" msgstr "" "Project-Id-Version: tdegraphics/kdvi.po\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-21 14:20+0100\n" "PO-Revision-Date: 2004-12-03 14:52-0500\n" "Last-Translator: Kevin Patrick Scannell <scannell@SLU.EDU>\n" "Language-Team: ga <LL@li.org>\n" @@ -10,6 +10,18 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Séamus Ó Ciardhuáin,Kevin Scannell" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "seoc at iolfree dot ie,scannell at slu dot edu" + #: TeXFontDefinition.cpp:108 msgid "Cannot find font %1, file %2." msgstr "Ní féidir cló %1, comhad %2 a aimsiú." @@ -38,7 +50,8 @@ msgstr "" #: TeXFont_PFB.cpp:44 msgid "" -"The font file %1 could be opened and read, but its font format is unsupported." +"The font file %1 could be opened and read, but its font format is " +"unsupported." msgstr "" #: TeXFont_PFB.cpp:50 @@ -100,27 +113,15 @@ msgstr "Droch-chomhad pk (%1), an iomarca giotáin" msgid "Font has non-square aspect ratio " msgstr "" -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Séamus Ó Ciardhuáin,Kevin Scannell" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "seoc at iolfree dot ie,scannell at slu dot edu" - #: dviFile.cpp:112 msgid "The DVI file does not start with the preamble." msgstr "" #: dviFile.cpp:117 msgid "" -"The DVI file contains the wrong version of DVI output for this program. Hint: " -"If you use the typesetting system Omega, you have to use a special program, " -"such as oxdvi." +"The DVI file contains the wrong version of DVI output for this program. " +"Hint: If you use the typesetting system Omega, you have to use a special " +"program, such as oxdvi." msgstr "" #: dviFile.cpp:155 @@ -164,9 +165,13 @@ msgstr "KDVI: Eolas" #: dviRenderer.cpp:277 msgid "" -"<qt>This DVI file contains source file information. You may click into the text " -"with the middle mouse button, and an editor will open the TeX-source file " -"immediately.</qt>" +"<qt>This DVI file contains source file information. You may click into the " +"text with the middle mouse button, and an editor will open the TeX-source " +"file immediately.</qt>" +msgstr "" + +#: dviRenderer.cpp:284 +msgid "Do not show this message again" msgstr "" #: dviRenderer.cpp:286 @@ -189,8 +194,8 @@ msgstr "" #: dviRenderer.cpp:439 msgid "" -"<qt><strong>File error.</strong> The specified file '%1' does not exist. KDVI " -"already tried to add the ending '.dvi'.</qt>" +"<qt><strong>File error.</strong> The specified file '%1' does not exist. " +"KDVI already tried to add the ending '.dvi'.</qt>" msgstr "" #: dviRenderer.cpp:441 @@ -199,23 +204,23 @@ msgstr "Earráid Chomhaid!" #: dviRenderer.cpp:452 msgid "" -"<qt>Could not open file <nobr><strong>%1</strong></nobr> which has type <strong>" -"%2</strong>. KDVI can only load DVI (.dvi) files.</qt>" +"<qt>Could not open file <nobr><strong>%1</strong></nobr> which has type " +"<strong>%2</strong>. KDVI can only load DVI (.dvi) files.</qt>" msgstr "" #: dviRenderer.cpp:463 dviRenderer.cpp:481 msgid "" -"<qt>File corruption! KDVI had trouble interpreting your DVI file. Most likely " -"this means that the DVI file is broken.</qt>" +"<qt>File corruption! KDVI had trouble interpreting your DVI file. Most " +"likely this means that the DVI file is broken.</qt>" msgstr "" #: dviRenderer.cpp:640 msgid "" -"<qt>You have asked KDVI to locate the place in the DVI file which corresponds " -"to line %1 in the TeX-file <strong>%2</strong>. It seems, however, that the DVI " -"file does not contain the necessary source file information. We refer to the " -"manual of KDVI for a detailed explanation on how to include this information. " -"Press the F1 key to open the manual.</qt>" +"<qt>You have asked KDVI to locate the place in the DVI file which " +"corresponds to line %1 in the TeX-file <strong>%2</strong>. It seems, " +"however, that the DVI file does not contain the necessary source file " +"information. We refer to the manual of KDVI for a detailed explanation on " +"how to include this information. Press the F1 key to open the manual.</qt>" msgstr "" #: dviRenderer.cpp:645 dviRenderer.cpp:685 @@ -224,14 +229,14 @@ msgstr "" #: dviRenderer.cpp:683 msgid "" -"<qt>KDVI was not able to locate the place in the DVI file which corresponds to " -"line %1 in the TeX-file <strong>%2</strong>.</qt>" +"<qt>KDVI was not able to locate the place in the DVI file which corresponds " +"to line %1 in the TeX-file <strong>%2</strong>.</qt>" msgstr "" #: dviRenderer.cpp:737 msgid "" -"The DVI-file refers to the TeX-file <strong>%1</strong> " -"which could not be found." +"The DVI-file refers to the TeX-file <strong>%1</strong> which could not be " +"found." msgstr "" #: dviRenderer.cpp:740 @@ -241,8 +246,8 @@ msgstr "Níorbh fhéidir comhad a aimsiú" #: dviRenderer.cpp:747 msgid "" "You have not yet specified an editor for inverse search. Please choose your " -"favorite editor in the <strong>DVI options dialog</strong> " -"which you will find in the <strong>Settings</strong>-menu." +"favorite editor in the <strong>DVI options dialog</strong> which you will " +"find in the <strong>Settings</strong>-menu." msgstr "" #: dviRenderer.cpp:752 @@ -255,15 +260,12 @@ msgstr "" #: dviRenderer.cpp:785 msgid "" -"<qt>The external program" -"<br>" -"<br><tt><strong>%1</strong></tt>" -"<br/>" -"<br/>which was used to call the editor for inverse search, reported an error. " -"You might wish to look at the <strong>document info dialog</strong> " -"which you will find in the File-Menu for a precise error report. The manual for " -"KDVI contains a detailed explanation how to set up your editor for use with " -"KDVI, and a list of common problems.</qt>" +"<qt>The external program<br><br><tt><strong>%1</strong></tt><br/><br/>which " +"was used to call the editor for inverse search, reported an error. You might " +"wish to look at the <strong>document info dialog</strong> which you will " +"find in the File-Menu for a precise error report. The manual for KDVI " +"contains a detailed explanation how to set up your editor for use with KDVI, " +"and a list of common problems.</qt>" msgstr "" #: dviRenderer.cpp:791 @@ -300,14 +302,14 @@ msgstr "" #: dviRenderer_export.cpp:84 msgid "" -"KDVI could not locate the program 'dvipdfm' on your computer. That program is " -"essential for the export function to work. You can, however, convert the " -"DVI-file to PDF using the print function of KDVI, but that will often produce " -"documents which print ok, but are of inferior quality if viewed in the Acrobat " -"Reader. It may be wise to upgrade to a more recent version of your TeX " -"distribution which includes the 'dvipdfm' program.\n" -"Hint to the perplexed system administrator: KDVI uses the shell's PATH variable " -"when looking for programs." +"KDVI could not locate the program 'dvipdfm' on your computer. That program " +"is essential for the export function to work. You can, however, convert the " +"DVI-file to PDF using the print function of KDVI, but that will often " +"produce documents which print ok, but are of inferior quality if viewed in " +"the Acrobat Reader. It may be wise to upgrade to a more recent version of " +"your TeX distribution which includes the 'dvipdfm' program.\n" +"Hint to the perplexed system administrator: KDVI uses the shell's PATH " +"variable when looking for programs." msgstr "" #: dviRenderer_export.cpp:99 @@ -318,8 +320,7 @@ msgstr "*.pdf|Formáid Doiciméad Iniompartha (*.pdf)" msgid "Export File As" msgstr "Easpórtáil Comhad Mar" -#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 -#: kdvi_multipage.cpp:164 +#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 kdvi_multipage.cpp:164 msgid "" "The file %1\n" "exists. Do you want to overwrite that file?" @@ -327,8 +328,7 @@ msgstr "" "Tá an comhad %1\n" "ann cheana. An bhfuil tú cinnte gur mian leat scríobh air?" -#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 -#: kdvi_multipage.cpp:165 +#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 kdvi_multipage.cpp:165 msgid "Overwrite File" msgstr "Forscríobh Comhad" @@ -342,9 +342,9 @@ msgstr "Ag úsáid dvipdfm chun an comhad a easpórtáil go PDF" #: dviRenderer_export.cpp:114 msgid "" -"KDVI is currently using the external program 'dvipdfm' to convert your DVI-file " -"to PDF. Sometimes that can take a while because dvipdfm needs to generate its " -"own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvipdfm' to convert your DVI-" +"file to PDF. Sometimes that can take a while because dvipdfm needs to " +"generate its own bitmap fonts Please be patient." msgstr "" #: dviRenderer_export.cpp:118 @@ -361,9 +361,10 @@ msgstr "Fan go fóill, le do thoil..." #: dviRenderer_export.cpp:137 msgid "" -"<qt>The external program 'dvipdf', which was used to export the file, reported " -"an error. You might wish to look at the <strong>document info dialog</strong> " -"which you will find in the File-Menu for a precise error report.</qt>" +"<qt>The external program 'dvipdf', which was used to export the file, " +"reported an error. You might wish to look at the <strong>document info " +"dialog</strong> which you will find in the File-Menu for a precise error " +"report.</qt>" msgstr "" #: dviRenderer_export.cpp:140 @@ -376,11 +377,10 @@ msgid "" "PostScript format, and cannot be handled by the <strong>dvips</strong> " "program that KDVI uses interally to print or to export to PostScript. The " "functionality that you require is therefore unavailable in this version of " -"KDVI.</p>" -"<p>As a workaround, you can use the <strong>File/Export As</strong>" -"-Menu to save this file in PDF format, and then use a PDF viewer.</p>" -"<p>The author of KDVI apologizes for the inconvenience. If enough users " -"complain, the missing functionality might later be added.</p></qt>" +"KDVI.</p><p>As a workaround, you can use the <strong>File/Export As</strong>-" +"Menu to save this file in PDF format, and then use a PDF viewer.</p><p>The " +"author of KDVI apologizes for the inconvenience. If enough users complain, " +"the missing functionality might later be added.</p></qt>" msgstr "" #: dviRenderer_export.cpp:188 @@ -397,9 +397,9 @@ msgstr "Ag úsáid dvips chun an comhad a easpórtáil go PostScript" #: dviRenderer_export.cpp:217 msgid "" -"KDVI is currently using the external program 'dvips' to convert your DVI-file " -"to PostScript. Sometimes that can take a while because dvips needs to generate " -"its own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvips' to convert your DVI-" +"file to PostScript. Sometimes that can take a while because dvips needs to " +"generate its own bitmap fonts Please be patient." msgstr "" #: dviRenderer_export.cpp:221 @@ -412,9 +412,10 @@ msgstr "Dialóg dul chun cinn dvips" #: dviRenderer_export.cpp:300 msgid "" -"<qt>The external program 'dvips', which was used to export the file, reported " -"an error. You might wish to look at the <strong>document info dialog</strong> " -"which you will find in the File-Menu for a precise error report.</qt>" +"<qt>The external program 'dvips', which was used to export the file, " +"reported an error. You might wish to look at the <strong>document info " +"dialog</strong> which you will find in the File-Menu for a precise error " +"report.</qt>" msgstr "" #: dviRenderer_export.cpp:303 @@ -428,8 +429,7 @@ msgstr "%1 á leabú" #: dviRenderer_prescan.cpp:105 msgid "" -"Page %1: The PostScript file <strong>%2</strong> could not be found." -"<br>" +"Page %1: The PostScript file <strong>%2</strong> could not be found.<br>" msgstr "" #: dviRenderer_prescan.cpp:255 @@ -451,8 +451,9 @@ msgstr "" #: fontpool.cpp:48 msgid "" "KDVI is currently generating bitmap fonts which are needed to display your " -"document. For this, KDVI uses a number of external programs, such as MetaFont. " -"You can find the output of these programs later in the document info dialog." +"document. For this, KDVI uses a number of external programs, such as " +"MetaFont. You can find the output of these programs later in the document " +"info dialog." msgstr "" #: fontpool.cpp:51 @@ -475,6 +476,10 @@ msgstr "Ainm TeX" msgid "Family" msgstr "Clann" +#: fontpool.cpp:192 +msgid "Zoom" +msgstr "" + #: fontpool.cpp:193 msgid "Type" msgstr "Cineál" @@ -493,8 +498,7 @@ msgstr "Comhad cló gan aimsiú" #: fontpool.cpp:284 msgid "" -"<qt>" -"<p>KDVI was not able to locate all the font files which are necessary to " +"<qt><p>KDVI was not able to locate all the font files which are necessary to " "display the current DVI file. Your document might be unreadable.</p></qt>" msgstr "" @@ -516,9 +520,8 @@ msgstr "" msgid "" "<p>The shell process for the kpsewhich program could not be started. " "Consequently, some font files could not be found, and your document might by " -"unreadable. If this error is reproducable please report the issue to the KDVI " -"developers using the 'Help' menu." -"<p>" +"unreadable. If this error is reproducable please report the issue to the " +"KDVI developers using the 'Help' menu.<p>" msgstr "" #: fontpool.cpp:367 fontpool.cpp:405 @@ -532,14 +535,14 @@ msgstr "" #: fontpool.cpp:394 msgid "" "<p>There were problems running kpsewhich. As a result, some font files could " -"not be located, and your document might be unreadable.</p>" -"<p><b>Possible reason:</b> The kpsewhich program is perhaps not installed on " -"your system, or it cannot be found in the current search path.</p>" -"<p><b>What you can do:</b> The kpsewhich program is normally contained in " -"distributions of the TeX typesetting system. If TeX is not installed on your " -"system, you could install the TeTeX distribution (www.tetex.org). If you are " -"sure that TeX is installed, please try to use the kpsewhich program from the " -"command line to check if it really works.</p>" +"not be located, and your document might be unreadable.</p><p><b>Possible " +"reason:</b> The kpsewhich program is perhaps not installed on your system, " +"or it cannot be found in the current search path.</p><p><b>What you can do:</" +"b> The kpsewhich program is normally contained in distributions of the TeX " +"typesetting system. If TeX is not installed on your system, you could " +"install the TeTeX distribution (www.tetex.org). If you are sure that TeX is " +"installed, please try to use the kpsewhich program from the command line to " +"check if it really works.</p>" msgstr "" #: fontpool.cpp:590 @@ -570,6 +573,11 @@ msgstr "Comhad DVI" msgid "Information on the currently loaded DVI-file." msgstr "" +#: infodialog.cpp:33 +#, fuzzy +msgid "Fonts" +msgstr "Clónna TeX" + #: infodialog.cpp:38 msgid "Information on currently loaded fonts." msgstr "" @@ -577,8 +585,8 @@ msgstr "" #: infodialog.cpp:39 msgid "" "This text field shows detailed information about the currently loaded fonts. " -"This is useful for experts who want to locate problems in the setup of TeX or " -"KDVI." +"This is useful for experts who want to locate problems in the setup of TeX " +"or KDVI." msgstr "" #: infodialog.cpp:43 @@ -596,8 +604,8 @@ msgstr "" #: infodialog.cpp:48 msgid "" "KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text " -"field shows the output of these programs. That is useful for experts who want " -"to find problems in the setup of TeX or KDVI." +"field shows the output of these programs. That is useful for experts who " +"want to find problems in the setup of TeX or KDVI." msgstr "" #: infodialog.cpp:64 @@ -656,8 +664,8 @@ msgstr "" #: kdvi_multipage.cpp:105 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik." msgstr "" @@ -709,8 +717,8 @@ msgstr "Priontáil %1" #: kdvi_multipage.cpp:251 msgid "" "The list of pages you selected was empty.\n" -"Maybe you made an error in selecting the pages, e.g. by giving an invalid range " -"like '7-2'." +"Maybe you made an error in selecting the pages, e.g. by giving an invalid " +"range like '7-2'." msgstr "" #: kdvi_multipage.cpp:414 @@ -722,8 +730,8 @@ msgid "" "<qt>This function searches the DVI file for plain text. Unfortunately, this " "version of KDVI treats only plain ASCII characters properly. Symbols, " "ligatures, mathematical formulae, accented characters, and non-English text, " -"such as Russian or Korean, will most likely be messed up completely. Continue " -"anyway?</qt>" +"such as Russian or Korean, will most likely be messed up completely. " +"Continue anyway?</qt>" msgstr "" #: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64 @@ -758,8 +766,8 @@ msgstr "Comhaid le luchtú" #: main.cpp:37 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "This KDVI version is based on original code from KDVI version 0.43 and xdvik." msgstr "" @@ -769,8 +777,8 @@ msgstr "Tá URL %1 míchumtha." #: main.cpp:86 msgid "" -"The URL %1 does not point to a local file. You can only specify local files if " -"you are using the '--unique' option." +"The URL %1 does not point to a local file. You can only specify local files " +"if you are using the '--unique' option." msgstr "" #: optionDialogFontsWidget.cpp:34 @@ -824,336 +832,334 @@ msgstr "" #: psgs.cpp:250 msgid "" "<qt>The version of Ghostview that is installed on this computer does not " -"contain any of the Ghostview device drivers that are known to KDVI. PostScript " -"support has therefore been turned off in KDVI.</qt>" +"contain any of the Ghostview device drivers that are known to KDVI. " +"PostScript support has therefore been turned off in KDVI.</qt>" msgstr "" #: psgs.cpp:253 msgid "" -"<qt>" -"<p>The Ghostview program, which KDVI uses internally to display the PostScript " -"graphics that is included in this DVI file, is generally able to write its " -"output in a variety of formats. The sub-programs that Ghostview uses for these " -"tasks are called 'device drivers'; there is one device driver for each format " -"that Ghostview is able to write. Different versions of Ghostview often have " -"different sets of device drivers available. It seems that the version of " -"Ghostview that is installed on this computer does not contain <strong>" -"any</strong> of the device drivers that are known to KDVI.</p>" -"<p>It seems unlikely that a regular installation of Ghostview would not contain " -"these drivers. This error may therefore point to a serious misconfiguration of " -"the Ghostview installation on your computer.</p>" -"<p>If you want to fix the problems with Ghostview, you can use the command " -"<strong>gs --help</strong> to display the list of device drivers contained in " -"Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' drivers. " -"Note that KDVI needs to be restarted to re-enable PostScript support.</p></qt>" -msgstr "" - -#. i18n: file kdvi_part.rc line 6 -#: rc.cpp:6 -#, no-c-format -msgid "Export As" -msgstr "Easpórtáil Mar" +"<qt><p>The Ghostview program, which KDVI uses internally to display the " +"PostScript graphics that is included in this DVI file, is generally able to " +"write its output in a variety of formats. The sub-programs that Ghostview " +"uses for these tasks are called 'device drivers'; there is one device driver " +"for each format that Ghostview is able to write. Different versions of " +"Ghostview often have different sets of device drivers available. It seems " +"that the version of Ghostview that is installed on this computer does not " +"contain <strong>any</strong> of the device drivers that are known to KDVI.</" +"p><p>It seems unlikely that a regular installation of Ghostview would not " +"contain these drivers. This error may therefore point to a serious " +"misconfiguration of the Ghostview installation on your computer.</p><p>If " +"you want to fix the problems with Ghostview, you can use the command " +"<strong>gs --help</strong> to display the list of device drivers contained " +"in Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' " +"drivers. Note that KDVI needs to be restarted to re-enable PostScript " +"support.</p></qt>" +msgstr "" -#. i18n: file optionDialogFontsWidget_base.ui line 28 -#: rc.cpp:18 -#, no-c-format -msgid "Use font hinting for Type 1 fonts, if available" +#: special.cpp:39 +msgid "That makes 25 errors. Further error messages will not be printed." msgstr "" -#. i18n: file optionDialogFontsWidget_base.ui line 31 -#: rc.cpp:21 -#, no-c-format +#: special.cpp:224 msgid "" -"You should enable this, if the use of font hinting improves readability on your " -"machine." +"Error in DVIfile '%1', page %2. Color pop command issued when the color " +"stack is empty." msgstr "" -#. i18n: file optionDialogFontsWidget_base.ui line 34 -#: rc.cpp:24 -#, no-c-format +#: special.cpp:309 msgid "" -"Many modern fonts contain \"font hinting\" information which can be used to " -"improve the appearance of a font on low-resolution displays, such as a computer " -"monitor, or a notebook screen. However, many people find the \"improved\" fonts " -"quite ugly and prefer to have this option disabled." +"Malformed parameter in the epsf special command.\n" +"Expected a float to follow %1 in %2" msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 27 -#: rc.cpp:27 -#, no-c-format -msgid "Show PostScript specials" +#: special.cpp:435 +#, c-format +msgid "" +"File not found: \n" +" %1" msgstr "" +"Comhad gan aimsiú: \n" +" %1" -#. i18n: file optionDialogSpecialWidget_base.ui line 30 -#: rc.cpp:30 -#, no-c-format -msgid "If in doubt, enable this option." +#: special.cpp:702 +msgid "" +"Error in DVIfile '%1', page %2. Could not interpret angle in text rotation " +"special." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 33 -#: rc.cpp:33 rc.cpp:83 -#, no-c-format +#: special.cpp:725 +msgid "The special command '%1' is not implemented." +msgstr "" + +#: util.cpp:75 +msgid "Fatal Error! " +msgstr "Earráid Mharfach! " + +#: util.cpp:78 msgid "" -"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " -"Ghostview PostScript interpreter to display these. You probably want to enable " -"this option, unless you have a DVI-file whose PostScript part is broken, or too " -"large for your machine." +"Fatal error.\n" +"\n" msgstr "" +"Earráid mharfach.\n" +"\n" -#. i18n: file optionDialogSpecialWidget_base.ui line 41 -#: rc.cpp:36 -#, no-c-format -msgid "Editor for Inverse Search" +#: util.cpp:80 +msgid "" +"\n" +"\n" +"This probably means that either you found a bug in KDVI,\n" +"or that the DVI file, or auxiliary files (such as font files, \n" +"or virtual font files) were really badly broken.\n" +"KDVI will abort after this message. If you believe that you \n" +"found a bug, or that KDVI should behave better in this situation\n" +"please report the problem." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 60 -#: rc.cpp:39 -#, no-c-format -msgid "Choose an editor which is used in inverse search." +#: vf.cpp:86 +msgid "Checksum mismatch" msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 64 -#: rc.cpp:42 -#, no-c-format -msgid "" -"<p>Some DVI files contain 'inverse search' information. If such a DVI file is " -"loaded, you can right-click into KDVI and an editor will open, load the TeX " -"file and jump to the correct position. You can select your favorite editor " -"here. If in doubt, 'nedit' is usually a good choice.</p>\n" -"<p>Check the KDVI manual to see how to prepare DVI files which support the " -"inverse search.</p>" +#: vf.cpp:87 +msgid " in font file " +msgstr " i gcomhad clófhoirne " + +#: vf.cpp:132 +msgid "Could not allocate memory for a macro table." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 80 -#: rc.cpp:46 -#, no-c-format -msgid "Description:" -msgstr "Cur Síos:" +#: vf.cpp:149 +msgid "Virtual character " +msgstr "Carachtar fíorúil " -#. i18n: file optionDialogSpecialWidget_base.ui line 96 -#: rc.cpp:49 -#, no-c-format -msgid "Shell command:" -msgstr "Ordú blaoisce:" +#: vf.cpp:149 +msgid " in font " +msgstr " i gclófhoirne " + +#: vf.cpp:150 +msgid " ignored." +msgstr ": rinneadh neamhshuim air." + +#: vf.cpp:180 +#, c-format +msgid "Wrong command byte found in VF macro list: %1" +msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 115 -#: rc.cpp:52 +#: kdvi.kcfg:10 #, no-c-format msgid "" -"Explains about the editor's capabilities in conjunction with inverse search." +"Use MetaFont to generate missing fonts. If in doubt, enable this option." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 119 -#: rc.cpp:55 +#: kdvi.kcfg:11 #, no-c-format msgid "" -"<p>Not all editors are well suited for inverse search. For instance, many " -"editors have no command like 'If the file is not yet loaded, load it. " -"Otherwise, bring the window with the file to the front'. If you are using an " -"editor like this, clicking into the DVI file will always open a new editor, " -"even if the TeX file is already open. Likewise, many editors have no command " -"line argument that would allow KDVI to specify the exact line which you wish to " -"edit.</p>\n" -"<p>If you feel that KDVI's support for a certain editor is inadequate, please " -"contact the Trinity developers at www.trinitydesktop.org.</p>" +"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " +"specific reason, you probably want to enable this option." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 135 -#: rc.cpp:59 +#: kdvi.kcfg:15 #, no-c-format -msgid "Shell-command line used to start the editor." +msgid "Show PostScript specials. If in doubt, enable this option." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 138 -#: rc.cpp:62 +#: kdvi.kcfg:16 optionDialogSpecialWidget_base.ui:33 #, no-c-format msgid "" -"If you are using inverse search, KDVI uses this command line to start the " -"editor. The field '%f' is replaced with the filename, and '%l' is replaced with " -"the line number." +"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " +"Ghostview PostScript interpreter to display these. You probably want to " +"enable this option, unless you have a DVI-file whose PostScript part is " +"broken, or too large for your machine." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 154 -#: rc.cpp:65 +#: kdvi.kcfg:20 #, no-c-format -msgid "Editor:" -msgstr "Eagarthóir:" +msgid "" +"Use font hinting. You should enable this, if the use of font hinting " +"improves readability on your machine." +msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 170 -#: rc.cpp:68 +#: kdvi.kcfg:21 #, no-c-format -msgid "What is 'inverse search'? " +msgid "" +"Many modern fonts contain "font hinting" information which can be " +"used to improve the appearance of a font on low-resolution displays, such as " +"a computer monitor, or a notebook screen. However, many people find the " +""improved" fonts quite ugly and prefer to have this option " +"disabled." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 176 -#: rc.cpp:71 +#: kdvi_part.rc:4 +#, fuzzy, no-c-format +msgid "&File" +msgstr "Comhad DVI" + +#: kdvi_part.rc:6 #, no-c-format -msgid "inv-search" -msgstr "" +msgid "Export As" +msgstr "Easpórtáil Mar" -#. i18n: file kdvi.kcfg line 10 -#: rc.cpp:74 +#: kdvi_part.rc:12 +#, fuzzy, no-c-format +msgid "&Edit" +msgstr "Eagarthóir:" + +#: kdvi_part.rc:17 #, no-c-format -msgid "" -"Use MetaFont to generate missing fonts. If in doubt, enable this option." +msgid "&Settings" msgstr "" -#. i18n: file kdvi.kcfg line 11 -#: rc.cpp:77 +#: kdvi_part.rc:21 #, no-c-format -msgid "" -"Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " -"specific reason, you probably want to enable this option." +msgid "&Help" msgstr "" -#. i18n: file kdvi.kcfg line 15 -#: rc.cpp:80 +#: optionDialogFontsWidget_base.ui:28 #, no-c-format -msgid "Show PostScript specials. If in doubt, enable this option." +msgid "Use font hinting for Type 1 fonts, if available" msgstr "" -#. i18n: file kdvi.kcfg line 20 -#: rc.cpp:86 +#: optionDialogFontsWidget_base.ui:31 #, no-c-format msgid "" -"Use font hinting. You should enable this, if the use of font hinting improves " -"readability on your machine." +"You should enable this, if the use of font hinting improves readability on " +"your machine." msgstr "" -#. i18n: file kdvi.kcfg line 21 -#: rc.cpp:89 +#: optionDialogFontsWidget_base.ui:34 #, no-c-format msgid "" -"Many modern fonts contain "font hinting" information which can be " -"used to improve the appearance of a font on low-resolution displays, such as a " +"Many modern fonts contain \"font hinting\" information which can be used to " +"improve the appearance of a font on low-resolution displays, such as a " "computer monitor, or a notebook screen. However, many people find the " -""improved" fonts quite ugly and prefer to have this option disabled." +"\"improved\" fonts quite ugly and prefer to have this option disabled." msgstr "" -#: special.cpp:39 -msgid "That makes 25 errors. Further error messages will not be printed." +#: optionDialogSpecialWidget_base.ui:27 +#, no-c-format +msgid "Show PostScript specials" msgstr "" -#: special.cpp:224 -msgid "" -"Error in DVIfile '%1', page %2. Color pop command issued when the color stack " -"is empty." +#: optionDialogSpecialWidget_base.ui:30 +#, no-c-format +msgid "If in doubt, enable this option." msgstr "" -#: special.cpp:309 -msgid "" -"Malformed parameter in the epsf special command.\n" -"Expected a float to follow %1 in %2" +#: optionDialogSpecialWidget_base.ui:41 +#, no-c-format +msgid "Editor for Inverse Search" msgstr "" -#: special.cpp:435 -#, c-format -msgid "" -"File not found: \n" -" %1" +#: optionDialogSpecialWidget_base.ui:60 +#, no-c-format +msgid "Choose an editor which is used in inverse search." msgstr "" -"Comhad gan aimsiú: \n" -" %1" -#: special.cpp:702 +#: optionDialogSpecialWidget_base.ui:63 +#, no-c-format msgid "" -"Error in DVIfile '%1', page %2. Could not interpret angle in text rotation " -"special." +"<p>Some DVI files contain 'inverse search' information. If such a DVI file " +"is loaded, you can right-click into KDVI and an editor will open, load the " +"TeX file and jump to the correct position. You can select your favorite " +"editor here. If in doubt, 'nedit' is usually a good choice.</p>\n" +"<p>Check the KDVI manual to see how to prepare DVI files which support the " +"inverse search.</p>" msgstr "" -#: special.cpp:725 -msgid "The special command '%1' is not implemented." -msgstr "" +#: optionDialogSpecialWidget_base.ui:80 +#, no-c-format +msgid "Description:" +msgstr "Cur Síos:" -#: util.cpp:75 -msgid "Fatal Error! " -msgstr "Earráid Mharfach! " +#: optionDialogSpecialWidget_base.ui:96 +#, no-c-format +msgid "Shell command:" +msgstr "Ordú blaoisce:" -#: util.cpp:78 +#: optionDialogSpecialWidget_base.ui:115 +#, no-c-format msgid "" -"Fatal error.\n" -"\n" +"Explains about the editor's capabilities in conjunction with inverse search." msgstr "" -"Earráid mharfach.\n" -"\n" -#: util.cpp:80 +#: optionDialogSpecialWidget_base.ui:118 +#, no-c-format msgid "" -"\n" -"\n" -"This probably means that either you found a bug in KDVI,\n" -"or that the DVI file, or auxiliary files (such as font files, \n" -"or virtual font files) were really badly broken.\n" -"KDVI will abort after this message. If you believe that you \n" -"found a bug, or that KDVI should behave better in this situation\n" -"please report the problem." +"<p>Not all editors are well suited for inverse search. For instance, many " +"editors have no command like 'If the file is not yet loaded, load it. " +"Otherwise, bring the window with the file to the front'. If you are using an " +"editor like this, clicking into the DVI file will always open a new editor, " +"even if the TeX file is already open. Likewise, many editors have no command " +"line argument that would allow KDVI to specify the exact line which you wish " +"to edit.</p>\n" +"<p>If you feel that KDVI's support for a certain editor is inadequate, " +"please contact the Trinity developers at www.trinitydesktop.org.</p>" msgstr "" -#: vf.cpp:86 -msgid "Checksum mismatch" +#: optionDialogSpecialWidget_base.ui:135 +#, no-c-format +msgid "Shell-command line used to start the editor." msgstr "" -#: vf.cpp:87 -msgid " in font file " -msgstr " i gcomhad clófhoirne " - -#: vf.cpp:132 -msgid "Could not allocate memory for a macro table." +#: optionDialogSpecialWidget_base.ui:138 +#, no-c-format +msgid "" +"If you are using inverse search, KDVI uses this command line to start the " +"editor. The field '%f' is replaced with the filename, and '%l' is replaced " +"with the line number." msgstr "" -#: vf.cpp:149 -msgid "Virtual character " -msgstr "Carachtar fíorúil " - -#: vf.cpp:149 -msgid " in font " -msgstr " i gclófhoirne " +#: optionDialogSpecialWidget_base.ui:154 +#, no-c-format +msgid "Editor:" +msgstr "Eagarthóir:" -#: vf.cpp:150 -msgid " ignored." -msgstr ": rinneadh neamhshuim air." +#: optionDialogSpecialWidget_base.ui:170 +#, no-c-format +msgid "What is 'inverse search'? " +msgstr "" -#: vf.cpp:180 -#, c-format -msgid "Wrong command byte found in VF macro list: %1" +#: optionDialogSpecialWidget_base.ui:176 +#, no-c-format +msgid "inv-search" msgstr "" -#: tips.txt:3 -msgid "" -"<p>...that KDVI can also load compressed DVI-files? \n" +#: tips:3 +msgid "<p>...that KDVI can also load compressed DVI-files? \n" msgstr "" -#: tips.txt:8 +#: tips:9 msgid "" "<p>...that you can mark text with the right mouse button and paste it\n" "into any application?\n" msgstr "" -#: tips.txt:14 +#: tips:16 msgid "" -"<p>...that KDVI now supports inverse search? You can click into your DVI file \n" +"<p>...that KDVI now supports inverse search? You can click into your DVI " +"file \n" "with the middle mouse button and your editor opens, loads the TeX file, and\n" "jumps to the proper line! <a href=\"help:/kdvi/inverse-search.html\">The \n" "manual explains how to set up your editor for this.</a> \n" msgstr "" -#: tips.txt:22 +#: tips:25 msgid "" -"<p>...that KDVI supports forward search? If you use Emacs or XEmacs, you can \n" +"<p>...that KDVI supports forward search? If you use Emacs or XEmacs, you " +"can \n" "jump directly from the TeX file to the associated place in the DVI file. \n" -"<a href=\"help:/kdvi/forward-search.html\">The manual explains how to set up \n" +"<a href=\"help:/kdvi/forward-search.html\">The manual explains how to set " +"up \n" "your editor for this.</a> \n" msgstr "" -#: tips.txt:30 -msgid "" -"<p>...that KDVI now offers full text search? \n" +#: tips:34 +msgid "<p>...that KDVI now offers full text search? \n" msgstr "" -#: tips.txt:35 +#: tips:40 msgid "" -"<p>...that KDVI can save your DVI file as PostScript, PDF, and even plain text? " -"\n" +"<p>...that KDVI can save your DVI file as PostScript, PDF, and even plain " +"text? \n" msgstr "" #~ msgid "Text..." |