1 files changed, 2230 insertions, 0 deletions
diff --git a/tde-i18n-hi/messages/tdenetwork/kppp.po b/tde-i18n-hi/messages/tdenetwork/kppp.po
new file mode 100644
index 00000000000..4e78ae3808d
--- /dev/null
+++ b/tde-i18n-hi/messages/tdenetwork/kppp.po
@@ -0,0 +1,2230 @@
+# translation of kppp.po to Hindi
+# Ravishankar Shrivastava <raviratlami@yahoo.com>, 2004.
+# Ravishankar Shrivastava <raviratlami@gmail.com>, 2004.
+msgid ""
+msgstr ""
+"Project-Id-Version: kppp\n"
+"POT-Creation-Date: 2006-06-13 04:00+0200\n"
+"PO-Revision-Date: 2004-08-22 15:40+0530\n"
+"Last-Translator: Ravishankar Shrivastava <raviratlami@gmail.com>\n"
+"Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.3.1\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "रविशंकर श्रीवास्तव"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "raviratlami@yahoo.com , http://www.geocities.com/raviratlami/"
+
+#: accounts.cpp:74 modems.cpp:73
+msgid "&Edit..."
+msgstr "संपादन... (&E)"
+
+#: accounts.cpp:76 modems.cpp:75
+msgid "Allows you to modify the selected account"
+msgstr "चुने गए खाते को परिवर्धित करने देता है"
+
+#: accounts.cpp:84 modems.cpp:83
+msgid "&New..."
+msgstr "नया... (&N)"
+
+#: accounts.cpp:87 modems.cpp:86
+msgid ""
+"Create a new dialup connection\n"
+"to the Internet"
+msgstr ""
+"इंटरनेट के लिए नया डायलअप कनेक्शन\n"
+"बनाएँ"
+
+#: accounts.cpp:90 modems.cpp:89
+msgid "Co&py"
+msgstr "नक़ल (&p)"
+
+#: accounts.cpp:94 modems.cpp:93
+msgid ""
+"Makes a copy of the selected account. All\n"
+"settings of the selected account are copied\n"
+"to a new account that you can modify to fit your\n"
+"needs"
+msgstr ""
+
+#: accounts.cpp:99 modems.cpp:98
+msgid "De&lete"
+msgstr "मिटाएँ (&l)"
+
+#: accounts.cpp:103 modems.cpp:102
+msgid ""
+"<p>Deletes the selected account\n"
+"\n"
+"<font color=\"red\"><b>Use with care!</b></font>"
+msgstr ""
+"<p>चुने गए खाते को मिटाता है\n"
+"\n"
+"<font color=\"red\"><b>Use with care!</b></font>"
+
+#: accounts.cpp:113
+msgid "Phone costs:"
+msgstr "दूरभाष खर्चः"
+
+#: accounts.cpp:123
+msgid ""
+"<p>This shows the accumulated phone costs\n"
+"for the selected account.\n"
+"\n"
+"<b>Important</b>: If you have more than one \n"
+"account - beware, this is <b>NOT</b> the sum \n"
+"of the phone costs of all your accounts!"
+msgstr ""
+
+#: accounts.cpp:132 conwindow.cpp:52
+msgid "Volume:"
+msgstr "आवाज़ निर्धारक:"
+
+#: accounts.cpp:141
+msgid ""
+"<p>This shows the number of bytes transferred\n"
+"for the selected account (not for all of your\n"
+"accounts. You can select what to display in\n"
+"the accounting dialog.\n"
+"\n"
+"<a href=\"#volaccounting\">More on volume accounting</a>"
+msgstr ""
+
+#: accounts.cpp:156
+msgid "&Reset..."
+msgstr "रीसेट... (&R)"
+
+#: accounts.cpp:162
+msgid "&View Logs"
+msgstr "लॉग देखें (&V)"
+
+#: accounts.cpp:262 accounts.cpp:307
+msgid "Maximum number of accounts reached."
+msgstr "खातों की अधिकतम संख्या आ चुकी"
+
+#: accounts.cpp:268
+msgid ""
+"Do you want to use the wizard to create the new account or the standard, "
+"dialog-based setup?\n"
+"The wizard is easier and sufficient in most cases. If you need very special "
+"settings, you might want to try the standard, dialog-based setup."
+msgstr ""
+
+#: accounts.cpp:273 providerdb.cpp:55
+msgid "Create New Account"
+msgstr "नया ख़ाता बनाएँ"
+
+#: accounts.cpp:274
+msgid "&Wizard"
+msgstr "विजार्ड (&W)"
+
+#: accounts.cpp:274
+msgid "&Manual Setup"
+msgstr "मेनुअल सेटअप (&M)"
+
+#: accounts.cpp:312
+msgid "No account selected."
+msgstr "कोई ख़ाता चुने गए नहीं."
+
+#: accounts.cpp:326
+msgid ""
+"Are you sure you want to delete\n"
+"the account \"%1\"?"
+msgstr ""
+"क्या आप वाक़ई\n"
+"खाता\"%1\" को मिटाना चाहते हैं?"
+
+#: accounts.cpp:329 modems.cpp:195
+msgid "Confirm"
+msgstr "पक्का करें"
+
+#: accounts.cpp:351
+msgid "New Account"
+msgstr "नया खाता"
+
+#: accounts.cpp:354
+msgid "Edit Account: "
+msgstr "खाता संपादनः"
+
+#: accounts.cpp:360
+msgid "Dial"
+msgstr "डॉयल"
+
+#: accounts.cpp:360
+msgid "Dial Setup"
+msgstr "डायल सेटअप"
+
+#: accounts.cpp:361
+msgid "IP"
+msgstr "आईपी"
+
+#: accounts.cpp:361
+msgid "IP Setup"
+msgstr "आईपी सेटअप"
+
+#: accounts.cpp:362
+msgid "Gateway"
+msgstr "गेटवे"
+
+#: accounts.cpp:362
+msgid "Gateway Setup"
+msgstr "गेटवे सेटअप"
+
+#: accounts.cpp:363
+msgid "DNS"
+msgstr "डीएनएस"
+
+#: accounts.cpp:363
+msgid "DNS Servers"
+msgstr "डीएनएस सर्वर्स"
+
+#: accounts.cpp:364
+msgid "Login Script"
+msgstr "लॉगइन स्क्रिप्ट"
+
+#: accounts.cpp:364
+msgid "Edit Login Script"
+msgstr "लॉगइन स्क्रिप्ट संपादन"
+
+#: accounts.cpp:365
+msgid "Execute"
+msgstr "चलाएँ"
+
+#: accounts.cpp:365
+msgid "Execute Programs"
+msgstr "प्रोग्राम चलाएँ"
+
+#: accounts.cpp:366
+msgid "Accounting"
+msgstr "हिसाब किताब"
+
+#: accounts.cpp:386
+msgid ""
+"You must enter a unique\n"
+"account name"
+msgstr ""
+"आपको एक विशिष्ट\n"
+"खाता नाम प्रविष्ट करना होगा"
+
+#: accounts.cpp:391
+msgid "Login script has unbalanced loop Start/End"
+msgstr "लॉगइन स्क्रिप्ट में असंतुलित लूप प्रारंभ/अंत है"
+
+#: accounts.cpp:405 conwindow.cpp:98 modems.cpp:259
+msgid "Byte"
+msgstr "बाइट"
+
+#: accounts.cpp:405 conwindow.cpp:98 modems.cpp:259
+msgid "KB"
+msgstr "केबी"
+
+#: accounts.cpp:406 conwindow.cpp:99 modems.cpp:260
+msgid "MB"
+msgstr "एमबी"
+
+#: accounts.cpp:406 conwindow.cpp:99 modems.cpp:260
+msgid "GB"
+msgstr "जीबी"
+
+#: accounts.cpp:431
+msgid "Reset Accounting"
+msgstr "हिसाब किताब रीसेट करें"
+
+#: accounts.cpp:434
+msgid "What to Reset"
+msgstr "क्या रीसेट करें"
+
+#: accounts.cpp:437
+msgid "Reset the accumulated p&hone costs"
+msgstr "संचित दूरभाष खर्च रीसेट करें (&h)"
+
+#: accounts.cpp:440
+msgid ""
+"Check this to set the phone costs\n"
+"to zero. Typically you will want to\n"
+"do this once a month."
+msgstr ""
+
+#: accounts.cpp:444
+msgid "Reset &volume accounting"
+msgstr "परिमाण ख़ाता रीसेट करें (&v)"
+
+#: accounts.cpp:447
+msgid ""
+"Check this to set the volume accounting\n"
+"to zero. Typically you will want to do this\n"
+"once a month."
+msgstr ""
+
+#: acctselect.cpp:61
+msgid "&Enable accounting"
+msgstr "हिसाब किताब सक्षम करें (&E)"
+
+#: acctselect.cpp:74
+msgid "Check for rule updates"
+msgstr "नियम अद्यतन के लिए चेक करें"
+
+#: acctselect.cpp:84
+msgid "Selected:"
+msgstr "चुने गएः"
+
+#: acctselect.cpp:97
+msgid "Volume accounting:"
+msgstr "परिमाण खाताः"
+
+#: acctselect.cpp:99
+msgid "No Accounting"
+msgstr "कोई खाता-बही नहीं"
+
+#: acctselect.cpp:100
+msgid "Bytes In"
+msgstr "बाइट्स आए"
+
+#: acctselect.cpp:101
+msgid "Bytes Out"
+msgstr "बाइट्स गए"
+
+#: acctselect.cpp:102
+msgid "Bytes In & Out"
+msgstr "बाइट्स आए व गए"
+
+#: acctselect.cpp:254
+msgid "Available Rules"
+msgstr "उपलब्ध नियम"
+
+#: acctselect.cpp:282
+msgid "(none)"
+msgstr "(कुछ नहीं)"
+
+#: connect.cpp:104
+msgid "Connecting to: "
+msgstr "से कनेक्ट हो रहेः"
+
+#: connect.cpp:113 connect.cpp:247 miniterm.cpp:135 modeminfo.cpp:58
+#: modeminfo.cpp:135
+msgid "Unable to create modem lock file."
+msgstr "मॉडम लॉक फ़ाइल बनाने में अक्षम."
+
+#: connect.cpp:118 connect.cpp:186 modeminfo.cpp:63
+msgid "Looking for modem..."
+msgstr "मॉडम के लिए देख रहे..."
+
+#: connect.cpp:126
+msgid "&Log"
+msgstr "लॉग (&L)"
+
+#: connect.cpp:213 kpppwidget.cpp:778
+#, c-format
+msgid "Connecting to: %1"
+msgstr " %1: से जुड़ रहे"
+
+#: connect.cpp:223 connect.cpp:224
+msgid "Running pre-startup command..."
+msgstr "प्री-स्टार्टअप कमांड चला रहे..."
+
+#: connect.cpp:241 miniterm.cpp:130 modeminfo.cpp:129
+msgid "Modem device is locked."
+msgstr "मॉडेम उपकरण तालाबन्द है."
+
+#: connect.cpp:294 connect.cpp:295
+msgid "Initializing modem..."
+msgstr "मॉडम प्रारंभ किया जा रहा है..."
+
+#: connect.cpp:332
+msgid "Setting "
+msgstr "विन्यास"
+
+#: connect.cpp:355 connect.cpp:356
+msgid "Setting speaker volume..."
+msgstr "स्पीकर आवाज़ नियत किया जा रहा है..."
+
+#: connect.cpp:371
+msgid "Turning off dial tone waiting..."
+msgstr "डायल डोन इंतजार बंद किया जा रहा है..."
+
+#: connect.cpp:390
+msgid "Waiting for callback..."
+msgstr ""
+
+#: connect.cpp:401
+#, c-format
+msgid "Dialing %1"
+msgstr "डायल किया जा रहा है %1"
+
+#: connect.cpp:432
+msgid "Line busy. Hanging up..."
+msgstr "लाइन व्यस्त है. हैंगिंग अप..."
+
+#: connect.cpp:437
+msgid "Line busy. Waiting: %1 seconds"
+msgstr "लाइन व्यस्त है. इंतजारः %1 सेकण्ड"
+
+#: connect.cpp:457
+msgid "No Dial Tone"
+msgstr "डायल टोन नहीं"
+
+#: connect.cpp:470
+#, fuzzy
+msgid "No carrier. Waiting: %1 seconds"
+msgstr "लाइन व्यस्त है. इंतजारः %1 सेकण्ड"
+
+#: connect.cpp:487
+msgid "No Carrier"
+msgstr "कोई कैरियर नहीं"
+
+#: connect.cpp:498
+msgid "Digital Line Protection Detected."
+msgstr "डिजिटल लाइन सुरक्षा पता लगा."
+
+#: connect.cpp:502
+msgid ""
+"A Digital Line Protection (DLP) error response has been detected.\n"
+"Please disconnect the phone line.\n"
+"\n"
+"Do NOT connect this modem to a digital phone line or the modem could get "
+"permanently damaged"
+msgstr ""
+
+#: connect.cpp:556
+#, c-format
+msgid "Scanning %1"
+msgstr "स्कैन किया जा रहा है %1"
+
+#: connect.cpp:566
+#, c-format
+msgid "Saving %1"
+msgstr "सहेज रहे %1"
+
+#: connect.cpp:584
+#, c-format
+msgid "Sending %1"
+msgstr "भेज रहे %1"
+
+#: connect.cpp:609
+#, c-format
+msgid "Expecting %1"
+msgstr "प्रत्याशित %1"
+
+#: connect.cpp:623
+msgid "Pause %1 seconds"
+msgstr "ठहरें %1 सेकण्ड"
+
+#: connect.cpp:640
+msgid "Timeout %1 seconds"
+msgstr "टाइमआउट %1 सेकण्ड"
+
+#: connect.cpp:652 connect.cpp:653
+msgid "Hangup"
+msgstr "हैंगअप"
+
+#: connect.cpp:666 connect.cpp:667
+msgid "Answer"
+msgstr "उत्तर"
+
+#: connect.cpp:675
+#, c-format
+msgid "ID %1"
+msgstr "आईडी %1"
+
+#: connect.cpp:711
+#, c-format
+msgid "Password %1"
+msgstr "पासवर्ड %1"
+
+#: connect.cpp:748
+#, c-format
+msgid "Prompting %1"
+msgstr "बता रहे %1"
+
+#: connect.cpp:785
+#, c-format
+msgid "PW Prompt %1"
+msgstr "पीडब्ल्यू संकेत %1"
+
+#: connect.cpp:810
+#, c-format
+msgid "Loop Start %1"
+msgstr "लूप चालू करें %1"
+
+#: connect.cpp:818
+msgid "ERROR: Nested too deep, ignored."
+msgstr "त्रुटिः नेस्टेड बहुत गहरा है, नज़र अंदाज़ किया."
+
+#: connect.cpp:821
+#, fuzzy
+msgid "Loops nested too deeply."
+msgstr "लूप्स नेस्टेड बहुत गहरा है!"
+
+#: connect.cpp:835
+#, c-format
+msgid "Loop End %1"
+msgstr "लूप ख़त्म %1"
+
+#: connect.cpp:837
+#, fuzzy, c-format
+msgid "LoopEnd without matching Start. Line: %1"
+msgstr "बिना जोड़ प्रारंभ के लूप ख़त्म! पंक्ति: %1"
+
+#: connect.cpp:922
+msgid "Starting pppd..."
+msgstr "पीपीडी चालू किया जा रहा है..."
+
+#: connect.cpp:1006
+#, c-format
+msgid "Scan Var: %1"
+msgstr "स्कैन वीएआर: %1"
+
+#: connect.cpp:1016
+#, c-format
+msgid "Found: %1"
+msgstr "मिला: %1"
+
+#: connect.cpp:1027
+#, c-format
+msgid "Looping: %1"
+msgstr "लूपिंग: %1"
+
+#: connect.cpp:1061 modeminfo.cpp:226
+msgid "One moment please..."
+msgstr "कृपया एक क्षण..."
+
+#: connect.cpp:1105
+#, fuzzy
+msgid "Script timed out."
+msgstr "स्क्रिप्ट टाइम्ड आउट!"
+
+#: connect.cpp:1120
+#, c-format
+msgid "Scanning: %1"
+msgstr "स्कैन किया जा रहा है: %1"
+
+#: connect.cpp:1129
+#, c-format
+msgid "Expecting: %1"
+msgstr "प्रत्याशित %1"
+
+#: connect.cpp:1164
+msgid "Logging on to network..."
+msgstr "नेटवर्क पर लागिंग..."
+
+#: connect.cpp:1198
+msgid "Running startup command..."
+msgstr "शुरुआती कमांड चलाए जा रहे हैं..."
+
+#: connect.cpp:1203 connect.cpp:1210
+msgid "Done"
+msgstr "सम्पन्न"
+
+#: connect.cpp:1279 edit.cpp:157 general.cpp:262 modem.cpp:187
+msgid "None"
+msgstr "कोई नहीं"
+
+#: connect.cpp:1281 general.cpp:260 modem.cpp:188 pppdata.cpp:546
+msgid "Hardware [CRTSCTS]"
+msgstr "हार्डवेयर [CRTSCTS]"
+
+#: connect.cpp:1339
+msgid "pppd command + command-line arguments exceed 2024 characters in length."
+msgstr ""
+
+#: conwindow.cpp:46
+msgid "Connected at:"
+msgstr "इस पर कनेक्टेडः"
+
+#: conwindow.cpp:49
+msgid "Time connected:"
+msgstr "समय से कनेक्टेडः"
+
+#: conwindow.cpp:56
+msgid "Session bill:"
+msgstr "सत्र खर्चः"
+
+#: conwindow.cpp:58
+msgid "Total bill:"
+msgstr "कुल खर्चः"
+
+#: conwindow.cpp:64
+msgid "&Disconnect"
+msgstr "डिस्कनेक्ट (&D)"
+
+#: conwindow.cpp:68
+msgid "De&tails"
+msgstr "विवरण (&t)"
+
+#: conwindow.cpp:264
+msgid ""
+"Connection: %1\n"
+"Connected at: %2\n"
+"Time connected: %3"
+msgstr ""
+"कनेक्शन: %1\n"
+"इस पर कनेक्टेड: %2\n"
+"इतने समय से कनेक्टेड: %3"
+
+#: conwindow.cpp:271
+msgid ""
+"\n"
+"Session Bill: %1\n"
+"Total Bill: %2"
+msgstr ""
+"\n"
+"सत्र बिल: %1\n"
+"कुल बिल: %2"
+
+#: debug.cpp:51
+msgid "Login Script Debug Window"
+msgstr "लॉगइन स्क्रिप्ट डिबग विंडो"
+
+#: docking.cpp:54
+msgid "Details"
+msgstr "विवरण"
+
+#: docking.cpp:56
+msgid "Disconnect"
+msgstr "डिस्कनेक्ट"
+
+#: docking.cpp:125
+msgid "Minimize"
+msgstr "न्यूनतम "
+
+#: edit.cpp:54
+msgid "Connection &name:"
+msgstr "कनेक्शन नामः (&n)"
+
+#: edit.cpp:62
+msgid "Type in a unique name for this connection"
+msgstr "इस कनेक्शन के लिए विशिष्ट नाम भरें"
+
+#: edit.cpp:68
+msgid "P&hone number:"
+msgstr "दूरभाष क्रमांकः (&h)"
+
+#: edit.cpp:80
+msgid "&Add..."
+msgstr "जोड़ें...(&A)"
+
+#: edit.cpp:104
+msgid ""
+"<p>Specifies the phone numbers to dial. You\n"
+"can supply multiple numbers here, simply\n"
+"click on \"Add\". You can arrange the\n"
+"order the numbers are tried by using the\n"
+"arrow buttons.\n"
+"\n"
+"When a number is busy or fails, <i>kppp</i> will \n"
+"try the next number and so on"
+msgstr ""
+
+#: edit.cpp:115
+msgid "A&uthentication:"
+msgstr "प्रमाणीकरणः (&u)"
+
+#: edit.cpp:120
+msgid "Script-based"
+msgstr "स्क्रिप्ट-आधारित"
+
+#: edit.cpp:121
+msgid "PAP"
+msgstr "पीएपी"
+
+#: edit.cpp:122
+msgid "Terminal-based"
+msgstr "टर्मिनल-आधारित"
+
+#: edit.cpp:123
+msgid "CHAP"
+msgstr "सीएचएपी"
+
+#: edit.cpp:124
+msgid "PAP/CHAP"
+msgstr "पीएपी/सीएचएपी"
+
+#: edit.cpp:126
+msgid ""
+"<p>Specifies the method used to identify yourself to\n"
+"the PPP server. Most universities still use\n"
+"<b>Terminal</b>- or <b>Script</b>-based authentication,\n"
+"while most ISP use <b>PAP</b> and/or <b>CHAP</b>. If\n"
+"unsure, contact your ISP.\n"
+"\n"
+"If you can choose between PAP and CHAP,\n"
+"choose CHAP, because it's much safer. If you don't know\n"
+"whether PAP or CHAP is right, choose PAP/CHAP."
+msgstr ""
+
+#: edit.cpp:139
+msgid "Store &password"
+msgstr "पासवर्ड भंडारित करें (&p)"
+
+#: edit.cpp:143
+msgid ""
+"<p>When this is turned on, your ISP password\n"
+"will be saved in <i>kppp</i>'s config file, so\n"
+"you do not need to type it in every time.\n"
+"\n"
+"<b><font color=\"red\">Warning:</font> your password will be stored as\n"
+"plain text in the config file, which is\n"
+"readable only to you. Make sure nobody\n"
+"gains access to this file!"
+msgstr ""
+
+#: edit.cpp:152
+msgid "&Callback type:"
+msgstr ""
+
+#: edit.cpp:158
+msgid "Administrator-defined"
+msgstr ""
+
+#: edit.cpp:159
+msgid "User-defined"
+msgstr ""
+
+#: edit.cpp:163
+msgid "Callback type"
+msgstr ""
+
+#: edit.cpp:168
+msgid "Call&back number:"
+msgstr ""
+
+#: edit.cpp:175
+#, fuzzy
+msgid "Callback phone number"
+msgstr "दूरभाष क्रमांक प्रविष्ट करें:"
+
+#: edit.cpp:180
+msgid "Customize &pppd Arguments..."
+msgstr "पीपीपीडी आर्गुमेंट्स मनपसंद बनाएँ... (&p)"
+
+#: edit.cpp:321
+msgid ""
+"Here you can select commands to run at certain stages of the\n"
+"connection. The commands are run with your real user id, so\n"
+"you cannot run any commands here requiring root permissions\n"
+"(unless, of course, you are root).\n"
+"\n"
+"Be sure to supply the whole path to the program otherwise\n"
+"kppp might be unable to find it."
+msgstr ""
+
+#: edit.cpp:336
+msgid "&Before connect:"
+msgstr "कनेक्शन से पहलेः (&B)"
+
+#: edit.cpp:343
+msgid ""
+"Allows you to run a program <b>before</b> a connection\n"
+"is established. It is called immediately before\n"
+"dialing has begun.\n"
+"\n"
+"This might be useful, e.g. to stop HylaFAX blocking the\n"
+"modem."
+msgstr ""
+
+#: edit.cpp:352
+msgid "&Upon connect:"
+msgstr "कनेक्शन परः (&U)"
+
+#: edit.cpp:359
+msgid ""
+"Allows you to run a program <b>after</b> a connection\n"
+"is established. When your program is called, all\n"
+"preparations for an Internet connection are finished.\n"
+"\n"
+"Very useful for fetching mail and news"
+msgstr ""
+
+#: edit.cpp:368
+msgid "Before &disconnect:"
+msgstr "डिस्कनेक्ट से पहलेः (&d)"
+
+#: edit.cpp:376
+msgid ""
+"Allows you to run a program <b>before</b> a connection\n"
+"is closed. The connection will stay open until\n"
+"the program exits."
+msgstr ""
+
+#: edit.cpp:383
+msgid "U&pon disconnect:"
+msgstr "डिस्कनेक्ट होने परः (&p)"
+
+#: edit.cpp:392
+msgid ""
+"Allows you to run a program <b>after</b> a connection\n"
+"has been closed."
+msgstr ""
+
+#: edit.cpp:436 edit.cpp:791
+msgid "C&onfiguration"
+msgstr "कॉन्फ़िगरेशन (&o)"
+
+#: edit.cpp:445
+msgid "Dynamic IP address"
+msgstr "डायनामिक आईपी पता"
+
+#: edit.cpp:447
+msgid ""
+"Select this option when your computer gets an\n"
+"internet address (IP) every time a\n"
+"connection is made.\n"
+"\n"
+"Almost every Internet Service Provider uses\n"
+"this method, so this should be turned on."
+msgstr ""
+
+#: edit.cpp:455
+msgid "Static IP address"
+msgstr "स्टेटिक आईपी पता"
+
+#: edit.cpp:459
+msgid ""
+"Select this option when your computer has a\n"
+"fixed internet address (IP). Most computers\n"
+"don't have this, so you should probably select\n"
+"dynamic IP addressing unless you know what you\n"
+"are doing."
+msgstr ""
+
+#: edit.cpp:469
+msgid "&IP address:"
+msgstr "आईपी पता: (&I)"
+
+#: edit.cpp:470
+msgid ""
+"If your computer has a permanent internet\n"
+"address, you must supply your IP address here."
+msgstr ""
+
+#: edit.cpp:481
+msgid "&Subnet mask:"
+msgstr "सबनेट मास्कः (&S)"
+
+#: edit.cpp:482
+msgid ""
+"<p>If your computer has a static Internet address,\n"
+"you must supply a network mask here. In almost\n"
+"all cases this netmask will be <b>255.255.255.0</b>,\n"
+"but your mileage may vary.\n"
+"\n"
+"If unsure, contact your Internet Service Provider"
+msgstr ""
+
+#: edit.cpp:497
+msgid "&Auto-configure hostname from this IP"
+msgstr "इस आईपी से होस्ट नाम स्वचलित कॉन्फ़िगर करें (&A)"
+
+#: edit.cpp:503
+msgid ""
+"<p>Whenever you connect, this reconfigures\n"
+"your hostname to match the IP address you\n"
+"got from the PPP server. This may be useful\n"
+"if you need to use a protocol which depends\n"
+"on this information, but it can also cause several\n"
+"<a href=\"kppp-7.html#autohostname\">problems</a>.\n"
+"\n"
+"Do not enable this unless you really need it."
+msgstr ""
+
+#: edit.cpp:544
+msgid ""
+"Selecting this option might cause some weird problems with the X-server and "
+"applications while kppp is connected. Don't use it until you know what you are "
+"doing!\n"
+"For more information take a look at the handbook (or help) in the section "
+"\"Frequently asked questions\"."
+msgstr ""
+
+#: edit.cpp:592
+msgid "Domain &name:"
+msgstr "डोमेन नामः (&n)"
+
+#: edit.cpp:599
+msgid ""
+"If you enter a domain name here, this domain\n"
+"name is used for your computer while you are\n"
+"connected. When the connection is closed, the\n"
+"original domain name of your computer is\n"
+"restored.\n"
+"\n"
+"If you leave this field blank, no changes are\n"
+"made to the domain name."
+msgstr ""
+
+#: edit.cpp:611
+msgid "C&onfiguration:"
+msgstr "कॉन्फ़िगरेशनः (&o)"
+
+#: edit.cpp:619
+msgid "Automatic"
+msgstr "स्वचलित"
+
+#: edit.cpp:626
+msgid "Manual"
+msgstr "हस्तचालित"
+
+#: edit.cpp:630
+msgid "DNS &IP address:"
+msgstr "डीएनएस आईपी पताः (&I)"
+
+#: edit.cpp:643
+msgid ""
+"<p>Allows you to specify a new DNS server to be\n"
+"used while you are connected. When the\n"
+"connection is closed, this DNS entry will be\n"
+"removed again.\n"
+"\n"
+"To add a DNS server, type in the IP address of\n"
+"the DNS server here and click on <b>Add</b>"
+msgstr ""
+
+#: edit.cpp:656 edit.cpp:887 pppdargs.cpp:76
+msgid "&Add"
+msgstr "जोड़ें (&A)"
+
+#: edit.cpp:664
+msgid ""
+"Click this button to add the DNS server\n"
+"specified in the field above. The entry\n"
+"will then be added to the list below"
+msgstr ""
+
+#: edit.cpp:675
+msgid ""
+"Click this button to remove the selected DNS\n"
+"server entry from the list below"
+msgstr ""
+
+#: edit.cpp:678
+msgid "DNS address &list:"
+msgstr "डीएनएस पता सूचीः (&l)"
+
+#: edit.cpp:688
+msgid ""
+"<p>This shows all defined DNS servers to use\n"
+"while you are connected. Use the <b>Add</b> and\n"
+"<b>Remove</b> buttons to modify the list"
+msgstr ""
+
+#: edit.cpp:696
+msgid "&Disable existing DNS servers during connection"
+msgstr "कनेक्शन के दौरान मौज़ूदा डीएनएस सर्वर्स अक्षम करें (&D)"
+
+#: edit.cpp:701
+msgid ""
+"<p>When this option is selected, all DNS\n"
+"servers specified in <tt>/etc/resolv.conf</tt> are\n"
+"temporary disabled while the dialup connection\n"
+"is established. After the connection is\n"
+"closed, the servers will be re-enabled\n"
+"\n"
+"Typically, there is no reason to use this\n"
+"option, but it may become useful under \n"
+"some circumstances."
+msgstr ""
+
+#: edit.cpp:799
+msgid "Default gateway"
+msgstr "डिफ़ॉल्ट गेटवे"
+
+#: edit.cpp:802
+msgid ""
+"This makes the PPP peer computer (the computer\n"
+"you are connected to with your modem) to act as\n"
+"a gateway. Your computer will send all packets not\n"
+"going to a computer inside your local net to this\n"
+"computer, which will route these packets.\n"
+"\n"
+"This is the default for most ISPs, so you should\n"
+"probably leave this option on."
+msgstr ""
+
+#: edit.cpp:813
+msgid "Static gateway"
+msgstr "स्थिर गेटवे"
+
+#: edit.cpp:816
+msgid ""
+"<p>Allows you to specify which computer you want\n"
+"to use as gateway (see <i>Default Gateway</i> above)"
+msgstr ""
+
+#: edit.cpp:820
+msgid "Gateway &IP address:"
+msgstr "गेटवे आईपी पताः (&I)"
+
+#: edit.cpp:824
+msgid "&Assign the default route to this gateway"
+msgstr "इस गेटवे पर डिफ़ॉल्ट रूट आबंटित करें (&A)"
+
+#: edit.cpp:827
+msgid ""
+"If this option is enabled, all packets not\n"
+"going to the local net are routed through\n"
+"the PPP connection.\n"
+"\n"
+"Normally, you should turn this on"
+msgstr ""
+
+#: edit.cpp:1204
+msgid "Add Phone Number"
+msgstr "दूरभाष क्रमांक जोड़ें"
+
+#: edit.cpp:1212
+msgid "Enter a phone number:"
+msgstr "दूरभाष क्रमांक प्रविष्ट करें:"
+
+#: general.cpp:56
+msgid "pppd version:"
+msgstr "पीपीपीडी संस्करण:"
+
+#: general.cpp:66
+msgid "pppd &timeout:"
+msgstr "पीपीपीडी टाइम-आउटः (&t)"
+
+#: general.cpp:68 general.cpp:384 general.cpp:470
+msgid " sec"
+msgstr "सेक."
+
+#: general.cpp:72
+msgid ""
+"<i>kppp</i> will wait this number of seconds\n"
+"to see if a PPP connection is established.\n"
+"If no connection is made in this time frame,\n"
+"<i>kppp</i> will give up and kill pppd."
+msgstr ""
+
+#: general.cpp:82
+msgid "Doc&k into panel on connect"
+msgstr "जुड़ने पर फलक पर डाक करें (&k)"
+
+#: general.cpp:84
+msgid ""
+"<p>After a connection is established, the\n"
+"window is minimized and a small icon\n"
+"in the KDE panel represents this window.\n"
+"\n"
+"Clicking on this icon will restore the\n"
+"window to its original location and\n"
+"size."
+msgstr ""
+
+#: general.cpp:97
+msgid "A&utomatic redial on disconnect"
+msgstr "डिस्कनेक्ट होने पर स्वचलित फिर से  डायल करें (&u)"
+
+#: general.cpp:103
+msgid ""
+"<p>When a connection is established and\n"
+"it somehow gets disconnected, <i>kppp</i>\n"
+"will try to reconnect to the same account.\n"
+"\n"
+"See <a href=\"#redial\">here</a> for more on this topic."
+msgstr ""
+
+#: general.cpp:109
+#, fuzzy
+msgid "Automatic redial on NO &CARRIER"
+msgstr "डिस्कनेक्ट होने पर स्वचलित फिर से  डायल करें (&u)"
+
+#: general.cpp:115
+msgid ""
+"<p>When dialing if modem returns NO CARRIER\n"
+"the program will make a new attempt to redial\n"
+"instead of waiting for user to click <CANCEL>\n"
+"button."
+msgstr ""
+
+#: general.cpp:120
+msgid "&Show clock on caption"
+msgstr "शीर्षक में घड़ी दिखाएँ (&S)"
+
+#: general.cpp:126
+msgid ""
+"When this option is checked, the window\n"
+"title shows the time since a connection\n"
+"was established. Very useful, so you \n"
+"should turn this on"
+msgstr ""
+
+#: general.cpp:131
+msgid "Disco&nnect on X server shutdown"
+msgstr "एक्स सर्वर के शटडाउन होने पर डिस्कनेक्ट हों (&n)"
+
+#: general.cpp:137
+msgid ""
+"<p>Checking this option will close any\n"
+"open connection when the X-server is\n"
+"shut down. You should enable this option\n"
+"unless you know what you are doing.\n"
+"\n"
+"See <a href=\"#disxserver\">here</a> for more on this."
+msgstr ""
+
+#: general.cpp:144
+msgid "&Quit on disconnect"
+msgstr "डिस्कनेक्ट पर बाहर हों (&Q)"
+
+#: general.cpp:150
+msgid ""
+"When this option is turned on, <i>kppp</i>\n"
+"will be closed when you disconnect"
+msgstr ""
+"यदि यह विकल्प सक्षम किया जाता है, <i>के-पीपीपी</i>\n"
+"बन्द हो जाएगा जब आप डिस्कनेक्ट होंगे"
+
+#: general.cpp:153
+msgid "Minimi&ze window on connect"
+msgstr "कनेक्ट होने पर विंडो न्यूनतम करें (&z)"
+
+#: general.cpp:159
+msgid ""
+"Iconifies <i>kppp</i>'s window when a\n"
+"connection is established"
+msgstr ""
+"<i>के-पीपीपी</i>' विंडो को चिह्व रूप में बना देता है जब एक\n"
+"कनेक्शन स्थापित होता है"
+
+#: general.cpp:211
+#, fuzzy
+msgid "Modem &name:"
+msgstr "मॉडम आवाजः (&v)"
+
+#: general.cpp:219
+#, fuzzy
+msgid "Type in a unique name for this modem"
+msgstr "इस कनेक्शन के लिए विशिष्ट नाम भरें"
+
+#: general.cpp:224
+msgid "Modem de&vice:"
+msgstr "मॉडम उपकरणः (&v)"
+
+#: general.cpp:243
+msgid ""
+"This specifies the serial port your modem is attached \n"
+"to. On Linux/x86, typically this is either /dev/ttyS0 \n"
+"(COM1 under DOS) or /dev/ttyS1 (COM2 under DOS).\n"
+"\n"
+"If you have an internal ISDN card with AT command\n"
+"emulation (most cards under Linux support this), you\n"
+"should select one of the /dev/ttyIx devices."
+msgstr ""
+
+#: general.cpp:255
+msgid "&Flow control:"
+msgstr "फ्लो कंट्रोलः (&F)"
+
+#: general.cpp:261
+msgid "Software [XON/XOFF]"
+msgstr "सॉफ्टवेयर [XON/XOFF]"
+
+#: general.cpp:272
+msgid ""
+"<p>Specifies how the serial port and modem\n"
+"communicate. You should not change this unless\n"
+"you know what you are doing.\n"
+"\n"
+"<b>Default</b>: CRTSCTS"
+msgstr ""
+
+#: general.cpp:281
+msgid "&Line termination:"
+msgstr "पंक्ति की समाप्ति (&L)"
+
+#: general.cpp:291
+msgid ""
+"<p>Specifies how AT commands are sent to your\n"
+"modem. Most modems will work fine with the\n"
+"default <i>CR/LF</i>. If your modem does not react\n"
+"to the init string, you should try different\n"
+"settings here\n"
+"\n"
+"<b>Default</b>: CR/LF"
+msgstr ""
+
+#: general.cpp:302
+msgid "Co&nnection speed:"
+msgstr "कनेक्शन गतिः (&n)"
+
+#: general.cpp:343
+msgid ""
+"Specifies the speed your modem and the serial\n"
+"port talk to each other. You should begin with\n"
+"at least 115200 bits/sec (or more if you know\n"
+"that your serial port supports higher speeds).\n"
+"If you have connection problems, try to reduce\n"
+"this value."
+msgstr ""
+
+#: general.cpp:361
+msgid "&Use lock file"
+msgstr "लाक फ़ाइल इस्तेमाल करें (&U)"
+
+#: general.cpp:369
+msgid ""
+"<p>To prevent other programs from accessing the\n"
+"modem while a connection is established, a\n"
+"file can be created to indicate that the modem\n"
+"is in use. On Linux an example file would be\n"
+"<tt>/var/lock/LCK..ttyS1</tt>\n"
+"Here you can select whether this locking will\n"
+"be done.\n"
+"\n"
+"<b>Default</b>: On"
+msgstr ""
+
+#: general.cpp:382
+msgid "Modem &timeout:"
+msgstr "मॉडम टाइम-आउटः (&t)"
+
+#: general.cpp:390
+msgid ""
+"This specifies how long <i>kppp</i> waits for a\n"
+"<i>CONNECT</i> response from your modem. The\n"
+"recommended value is 30 seconds."
+msgstr ""
+
+#: general.cpp:454
+msgid "&Wait for dial tone before dialing"
+msgstr "डायल करने से पहले डायल टोन का इंतजार करें (&W)"
+
+#: general.cpp:459
+msgid ""
+"<p>Normally the modem waits for a dial tone\n"
+"from your phone line, indicating that it can\n"
+"start to dial a number. If your modem does not\n"
+"recognize this sound, or your local phone system\n"
+"does not emit such a tone, uncheck this option\n"
+"\n"
+"<b>Default:</b>: On"
+msgstr ""
+
+#: general.cpp:468
+msgid "B&usy wait:"
+msgstr "व्यस्त इंतजारः (&u)"
+
+#: general.cpp:475
+msgid ""
+"Specifies the number of seconds to wait before\n"
+"redial if all dialed numbers are busy. This is\n"
+"necessary because some modems get stuck if the\n"
+"same number is busy too often.\n"
+"\n"
+"The default is 0 seconds, you should not change\n"
+"this unless you need to."
+msgstr ""
+
+#: general.cpp:488
+msgid "Modem &volume:"
+msgstr "मॉडम आवाजः (&v)"
+
+#: general.cpp:499
+msgid ""
+"Most modems have a speaker which makes\n"
+"a lot of noise when dialing. Here you can\n"
+"either turn this completely off or select a\n"
+"lower volume.\n"
+"\n"
+"If this does not work for your modem,\n"
+"you must modify the modem volume command."
+msgstr ""
+
+#: general.cpp:513
+msgid "Modem asserts CD line"
+msgstr "मॉडम एसर्ट्स सीडी लाइन"
+
+#: general.cpp:521
+msgid ""
+"This controls how <i>kppp</i> detects that the modem\n"
+"is not responding. Unless you are having\n"
+"problems with this, do not modify this setting.\n"
+"\n"
+"<b>Default</b>: Off"
+msgstr ""
+
+#: general.cpp:528
+msgid "Mod&em Commands..."
+msgstr "मॉडम कमांड्स... (&e)"
+
+#: general.cpp:530
+msgid ""
+"Allows you to change the AT command for\n"
+"your modem."
+msgstr ""
+"आपके मॉडम के लिए इसके एटी कमांड्स को बदलने\n"
+"की अनुमति देता है."
+
+#: general.cpp:533
+msgid "&Query Modem..."
+msgstr "मॉडम क्वैरी करें... (&Q)"
+
+#: general.cpp:535
+msgid ""
+"Most modems support the ATI command set to\n"
+"find out vendor and revision of your modem.\n"
+"\n"
+"Press this button to query your modem for\n"
+"this information. It can be useful to help\n"
+"you set up the modem"
+msgstr ""
+
+#: general.cpp:542
+msgid "&Terminal..."
+msgstr "टर्मिनल... (&T)"
+
+#: general.cpp:544
+msgid ""
+"Opens the built-in terminal program. You\n"
+"can use this if you want to play around\n"
+"with your modem's AT command set"
+msgstr ""
+
+#: general.cpp:619
+msgid "&Enable throughput graph"
+msgstr "थ्रोपुट ग्राफ सक्षम करें (&E)"
+
+#: general.cpp:623
+msgid "Graph Colors"
+msgstr "ग्राफ रंग"
+
+#: general.cpp:628
+msgid "Bac&kground:"
+msgstr "पृष्ठभूमि: (&k)"
+
+#: general.cpp:633
+msgid "&Text:"
+msgstr "पाठः (&T)"
+
+#: general.cpp:638
+msgid "I&nput bytes:"
+msgstr "इनपुट बाइट्स: (&n)"
+
+#: general.cpp:643
+msgid "O&utput bytes:"
+msgstr "आउटपुट बाइट्स: (&u)"
+
+#: kpppwidget.cpp:102
+msgid "C&onnect to: "
+msgstr "को कनेक्टः (&o)"
+
+#: kpppwidget.cpp:112
+#, fuzzy
+msgid "Use &modem: "
+msgstr "मॉडम रीसेट करें"
+
+#: kpppwidget.cpp:122
+msgid "&Login ID:"
+msgstr "लॉगइन आईडी: (&L)"
+
+#: kpppwidget.cpp:131
+msgid ""
+"<p>Type in the username that you got from your\n"
+"ISP. This is especially important for PAP\n"
+"and CHAP. You may omit this when you use\n"
+"terminal-based or script-based authentication.\n"
+"\n"
+"<b>Important</b>: case is important here:\n"
+"<i>myusername</i> is not the same as <i>MyUserName</i>."
+msgstr ""
+
+#: kpppwidget.cpp:142
+msgid "&Password:"
+msgstr "पासवर्ड: (&P)"
+
+#: kpppwidget.cpp:152
+msgid ""
+"<p>Type in the password that you got from your\n"
+"ISP. This is especially important for PAP\n"
+"and CHAP. You may omit this when you use\n"
+"terminal-based or script-based authentication.\n"
+"\n"
+"<b>Important</b>: case is important here:\n"
+"<i>mypassword</i> is not the same as <i>MyPassword</i>."
+msgstr ""
+
+#: kpppwidget.cpp:168
+msgid "Show lo&g window"
+msgstr "लॉग विंडो दिखाएँ (&g)"
+
+#: kpppwidget.cpp:175
+msgid ""
+"<p>This controls whether a log window is shown.\n"
+"A log window shows the communication between\n"
+"<i>kppp</i> and your modem. This will help you\n"
+"in tracking down problems.\n"
+"\n"
+"Turn it off if <i>kppp</i> routinely connects without\n"
+"problems"
+msgstr ""
+
+#: kpppwidget.cpp:195
+msgid "Co&nfigure..."
+msgstr "कॉन्फ़िगर... (&n)"
+
+#: kpppwidget.cpp:212
+msgid "&Connect"
+msgstr "कनेक्ट (&C)"
+
+#: kpppwidget.cpp:308
+msgid ""
+"No such Modem:\n"
+"%1\n"
+"Falling back to default"
+msgstr ""
+
+#: kpppwidget.cpp:318
+#, c-format
+msgid ""
+"No such Account:\n"
+"%1"
+msgstr ""
+"ऐसा कोई ख़ाता नहीं:\n"
+"%1"
+
+#: kpppwidget.cpp:384
+msgid "KPPP Configuration"
+msgstr "के-पीपीपी कॉन्फ़िगरेशन"
+
+#: kpppwidget.cpp:393
+msgid "&Accounts"
+msgstr "खाते (&A)"
+
+#: kpppwidget.cpp:393
+msgid "Account Setup"
+msgstr "खाता सेटअप"
+
+#: kpppwidget.cpp:401
+#, fuzzy
+msgid "&Modems"
+msgstr "मॉडेम (&M)"
+
+#: kpppwidget.cpp:401
+#, fuzzy
+msgid "Modems Setup"
+msgstr "मॉडम विन्यास"
+
+#: kpppwidget.cpp:405
+msgid "&Graph"
+msgstr "ग्राफ (&G)"
+
+#: kpppwidget.cpp:405
+msgid "Throughput Graph"
+msgstr "थ्रोपुट ग्राफ"
+
+#: kpppwidget.cpp:406
+msgid "M&isc"
+msgstr "विविध (&i)"
+
+#: kpppwidget.cpp:406
+msgid "Miscellaneous Settings"
+msgstr "विविध विन्यास"
+
+#: kpppwidget.cpp:616
+msgid "Timeout expired while waiting for the PPP interface to come up."
+msgstr ""
+
+#: kpppwidget.cpp:619
+msgid "<p>The pppd daemon died unexpectedly!</p>"
+msgstr "<p>पीपीपीडी डेमन अप्रत्याशित रूप से बन्द हो गया!</p>"
+
+#: kpppwidget.cpp:622
+#, c-format
+msgid "<p>Exit status: %1"
+msgstr "<p>बाहर स्थिति: %1"
+
+#: kpppwidget.cpp:623
+msgid ""
+"</p>"
+"<p>See 'man pppd' for an explanation of the error codes or take a look at the "
+"kppp FAQ on   <a href=\"%1\">%2</a></p>"
+msgstr ""
+
+#: kpppwidget.cpp:631
+#, fuzzy
+msgid "&Details"
+msgstr "विवरण"
+
+#: kpppwidget.cpp:664
+msgid ""
+"kppp's helper process just died.\n"
+"Since further execution would be pointless, kppp will shut down now."
+msgstr ""
+
+#: kpppwidget.cpp:706
+msgid ""
+"Cannot find the PPP daemon!\n"
+"Make sure that pppd is installed and that you have entered the correct path."
+msgstr ""
+
+#: kpppwidget.cpp:715
+msgid ""
+"kppp cannot execute:\n"
+" %1\n"
+"Please make sure that you have given kppp setuid permission and that pppd is "
+"executable."
+msgstr ""
+
+#: kpppwidget.cpp:736
+msgid ""
+"kppp can not find:\n"
+" %1\n"
+"Please make sure you have setup your modem device properly and/or adjust the "
+"location of the modem device on the modem tab of the setup dialog."
+msgstr ""
+
+#: kpppwidget.cpp:753
+msgid ""
+"You have selected the authentication method PAP or CHAP. This requires that you "
+"supply a username and a password."
+msgstr ""
+
+#: kpppwidget.cpp:762
+msgid ""
+"Cannot create PAP/CHAP authentication\n"
+"file \"%1\""
+msgstr ""
+"पीएपी/सीएचएपी प्रमाणीकरण फ़ाइल \"%1\"\n"
+"तैयार नहीं कर सकता"
+
+#: kpppwidget.cpp:771
+#, fuzzy
+msgid "You must specify a telephone number."
+msgstr "आपको एक दूरभाष क्रमांक उल्लेखित करना होगा!"
+
+#: kpppwidget.cpp:804
+msgid "Disconnecting..."
+msgstr "डिस्कनेक्ट हो रहे..."
+
+#: kpppwidget.cpp:807
+msgid "Executing command before disconnection."
+msgstr "डिस्कनेक्ट करने से पहले कमांड चलाएँ"
+
+#: kpppwidget.cpp:821
+#, fuzzy
+msgid "Announcing disconnection."
+msgstr "डिस्कनेक्ट पर बाहर हों (&Q)"
+
+#: kpppwidget.cpp:873
+msgid "Exiting kPPP will close your PPP Session."
+msgstr "के-पीपीपी से बाहर होने पर आपका पीपीपी सत्र बन्द होगा."
+
+#: kpppwidget.cpp:874
+msgid "Quit kPPP?"
+msgstr "के-पीपीपी से बाहर हों?"
+
+#: kpppwidget.cpp:924
+#, fuzzy
+msgid "Can not load the accounting ruleset \"%1\"."
+msgstr "लेखा रूलसेट \"%1\" लोड नहीं कर सका!"
+
+#: kpppwidget.cpp:1014
+msgid "Recent Changes in KPPP"
+msgstr "के-पीपीपी में हालिया परिवर्तन"
+
+#: kpppwidget.cpp:1027
+msgid ""
+"From version 1.4.8 on, kppp has a new feature\n"
+"called \"Quickhelp\". It's similar to a tooltip,\n"
+"but you can activate it whenever you want.\n"
+"\n"
+"To activate it, simply click on a control like\n"
+"a button or a label with the right mouse button.\n"
+"If the item supports Quickhelp, a popup menu\n"
+"will appear leading to Quickhelp.\n"
+"\n"
+"To test it, right-click somewhere in this text."
+msgstr ""
+
+#: kpppwidget.cpp:1039
+msgid "Don't show this hint again"
+msgstr "इस संकेत को दुबारा न दिखाएँ"
+
+#: kpppwidget.cpp:1055
+msgid ""
+"This is an example of <b>QuickHelp</b>.\n"
+"This window will stay open until you\n"
+"click a mouse button or a press a key.\n"
+msgstr ""
+
+#: loginterm.cpp:99
+msgid "Login Terminal Window"
+msgstr "लॉगइन टर्मिनल विंडो"
+
+#: main.cpp:66
+#, fuzzy
+msgid "A dialer and front-end to pppd"
+msgstr "पीपीडी के लिए डायलर फ्रन्ट-एण्ड."
+
+#: main.cpp:70
+msgid "Connect using 'account_name'"
+msgstr "'खाता-नाम' का प्रयोग कर कनेक्ट हों"
+
+#: main.cpp:71
+#, fuzzy
+msgid "Connect using 'modem_name'"
+msgstr "'खाता-नाम' का प्रयोग कर कनेक्ट हों"
+
+#: main.cpp:72
+msgid "Terminate an existing connection"
+msgstr "उपलब्ध कनेक्शन बन्द करें"
+
+#: main.cpp:73
+msgid "Quit after end of connection"
+msgstr "कनेक्शन ख़त्म होने के बाद बाहर हों"
+
+#: main.cpp:74
+msgid "Check syntax of rule_file"
+msgstr "नियम-फ़ाइल का सिंटेक्स जाँचें"
+
+#: main.cpp:75
+msgid "Enable test-mode"
+msgstr "टेस्ट-मोड सक्षम करें"
+
+#: main.cpp:76
+msgid "Use the specified device"
+msgstr ""
+
+#: main.cpp:203
+msgid "KPPP"
+msgstr "केपीपीपी"
+
+#: main.cpp:205
+msgid "(c) 1999-2002, The KPPP Developers"
+msgstr "(c) 1999-2002, केपीपीपी डेवलपर्स"
+
+#: main.cpp:206
+msgid "Current maintainer"
+msgstr "वर्तमान मेंटेनर"
+
+#: main.cpp:207
+msgid "Original author"
+msgstr "मूल लेखक"
+
+#: main.cpp:244
+#, c-format
+msgid ""
+"kppp can't create or read from\n"
+"%1."
+msgstr ""
+"केपीपीपी बना या पढ़ नहीं सका\n"
+"%1 से."
+
+#: main.cpp:275
+msgid ""
+"kppp has detected a %1 file.\n"
+"Another instance of kppp seems to be running under process-ID %2.\n"
+"Please click Exit, make sure that you are not running another kppp, delete the "
+"pid file, and restart kppp.\n"
+"Alternatively, if you have determined that there is no other kppp running, "
+"please click Continue to begin."
+msgstr ""
+
+#: main.cpp:286
+msgid "Exit"
+msgstr "बाहर"
+
+#: miniterm.cpp:53
+msgid "Kppp Mini-Terminal"
+msgstr "के-पीपीपी मिनी-टर्मिनल"
+
+#: miniterm.cpp:59
+msgid "&Reset Modem"
+msgstr "मॉडम रीसेट करें (&R)"
+
+#: miniterm.cpp:62
+msgid ""
+"MiniTerm - A terminal emulation for KPPP\n"
+"\n"
+"(c) 1997 Bernd Johannes Wuebben <wuebben@kde.org>\n"
+"(c) 1998 Harri Porten <porten@kde.org>\n"
+"(c) 1998 Mario Weilguni <mweilguni@kde.org>\n"
+"\n"
+"This program is published under the GNU GPL\n"
+"(GNU General Public License)"
+msgstr ""
+
+#: miniterm.cpp:72 modems.cpp:226
+msgid "&Modem"
+msgstr "मॉडेम (&M)"
+
+#: miniterm.cpp:107
+msgid "Close MiniTerm"
+msgstr "मिनी-टर्म बन्द करें"
+
+#: miniterm.cpp:111
+msgid "Reset Modem"
+msgstr "मॉडम रीसेट करें"
+
+#: miniterm.cpp:125
+msgid "Initializing Modem"
+msgstr "मॉडम प्रारंभ किया जा रहा है..."
+
+#: miniterm.cpp:151 miniterm.cpp:213 modeminfo.cpp:145
+msgid "Modem Ready"
+msgstr "मॉडम तैयार है."
+
+#: miniterm.cpp:192
+msgid "Hanging up..."
+msgstr "हैंगिंग अप..."
+
+#: miniterm.cpp:206
+msgid "Resetting Modem"
+msgstr "मॉडम रीसेट किया जा रहा है..."
+
+#: modem.cpp:131
+msgid "Unable to open modem."
+msgstr "मॉडम खोलने में अक्षम."
+
+#: modem.cpp:138
+msgid "Unable to detect state of CD line."
+msgstr "सीडी लाइन की स्थिति पता लगाने में अक्षम."
+
+#: modem.cpp:144
+msgid "The modem is not ready."
+msgstr "मॉडम तैयार नहीं है."
+
+#: modem.cpp:160 modem.cpp:208
+msgid "The modem is busy."
+msgstr "मॉडम व्यस्त है."
+
+#: modem.cpp:214
+msgid "Modem Ready."
+msgstr "मॉडम तैयार है."
+
+#: modem.cpp:226
+msgid ""
+"Can't restore tty settings: tcsetattr()\n"
+msgstr ""
+"tty विन्यास बहाल नहीं करें: tcsetattr()\n"
+
+#: modem.cpp:381
+msgid "The modem does not respond."
+msgstr "मॉडम प्रतिक्रिया नहीं दे रहा है."
+
+#: modem.cpp:520
+msgid "Unknown speed"
+msgstr "अज्ञात गति"
+
+#: modemcmds.cpp:49
+msgid "Edit Modem Commands"
+msgstr "मॉडम कमांड का संपादन करें"
+
+#: modemcmds.cpp:81
+msgid "Pre-init delay (sec/100):"
+msgstr "प्री-इनिट देरी (सेक./100):"
+
+#: modemcmds.cpp:86
+msgid "Initialization string %1:"
+msgstr "इनिशियलाइजेशन स्ट्रिंग %1:"
+
+#: modemcmds.cpp:105
+msgid "Post-init delay (sec/100):"
+msgstr "पोस्ट-इनिट देरी (सेक./100):"
+
+#: modemcmds.cpp:121
+msgid "Dialing speed (sec/100):"
+msgstr "डायलिंग गति (सेक./100):"
+
+#: modemcmds.cpp:126
+msgid "Init &response:"
+msgstr "इनिट जवाबः (&r)"
+
+#: modemcmds.cpp:133
+msgid "No di&al tone detection:"
+msgstr "डायल टोन पता नहीं लगाएँ: (&a)"
+
+#: modemcmds.cpp:140
+msgid "Dial &string:"
+msgstr "डायल स्ट्रिंग (&s)"
+
+#: modemcmds.cpp:147
+msgid "Co&nnect response:"
+msgstr "कनेक्ट जवाबः (&n)"
+
+#: modemcmds.cpp:154
+msgid "Busy response:"
+msgstr "व्यस्त जवाबः"
+
+#: modemcmds.cpp:160
+msgid "No carr&ier response:"
+msgstr "कोई कैरियर जवाब नहीं: (&i)"
+
+#: modemcmds.cpp:167
+msgid "No dial tone response:"
+msgstr "कोई डायलटोन जवाब नहीं:"
+
+#: modemcmds.cpp:173
+msgid "&Hangup string:"
+msgstr "हैंगअप स्ट्रिंगः (&H)"
+
+#: modemcmds.cpp:180
+msgid "Hangup response:"
+msgstr "हैंगअप जवाबः"
+
+#: modemcmds.cpp:186
+msgid "Answ&er string:"
+msgstr "उत्तर स्ट्रिंगः (&e)"
+
+#: modemcmds.cpp:193
+msgid "Ring response:"
+msgstr "रिंग जवाबः"
+
+#: modemcmds.cpp:199
+msgid "Ans&wer response:"
+msgstr "जवाब उत्तरः (&w)"
+
+#: modemcmds.cpp:206
+msgid "DLP response:"
+msgstr "डीएलपी जवाबः"
+
+#: modemcmds.cpp:212
+msgid "Escape strin&g:"
+msgstr "एस्केप स्ट्रिंगः (&g)"
+
+#: modemcmds.cpp:219
+msgid "Escape response:"
+msgstr "एस्केप जवाबः"
+
+#: modemcmds.cpp:237
+msgid "Guard time (sec/50):"
+msgstr "गार्ड समय (सेक./50):"
+
+#: modemcmds.cpp:240
+msgid "Volume off/low/high:"
+msgstr "आवाज़ बन्द/कम/ज्यादा:"
+
+#: modemdb.cpp:47
+msgid "Select Modem Type"
+msgstr "मॉडम क़िस्म चुनें"
+
+#: modemdb.cpp:49
+msgid ""
+"To set up your modem, first choose its vendor in the list to the left, and then "
+"select the model from the right list. If you don't know which modem you have, "
+"you can try out one of the \"Generic\" modems."
+msgstr ""
+
+#: modemdb.cpp:149 modemdb.cpp:151 modemdb.cpp:222 modemdb.cpp:237
+msgid "<Generic>"
+msgstr "<जेनेरिक>"
+
+#: modemdb.cpp:219
+msgid "Hayes(tm) compatible modem"
+msgstr "हेयस(टीएम) संगत मॉडम"
+
+#: modeminfo.cpp:41
+msgid "ATI Query"
+msgstr "एटीआई क्वेरी"
+
+#: modeminfo.cpp:117
+msgid "Modem query timed out."
+msgstr "मॉडम क्वैरी टाइम आउट हो गया."
+
+#: modeminfo.cpp:248
+msgid "Modem Query Results"
+msgstr "मॉडम क्वैरी परिणाम"
+
+#: modems.cpp:149 modems.cpp:173
+#, fuzzy
+msgid "Maximum number of modems reached."
+msgstr "खातों की अधिकतम संख्या आ चुकी"
+
+#: modems.cpp:178
+#, fuzzy
+msgid "No modem selected."
+msgstr "कोई ख़ाता चुने गए नहीं."
+
+#: modems.cpp:192
+#, fuzzy
+msgid ""
+"Are you sure you want to delete\n"
+"the modem \"%1\"?"
+msgstr ""
+"क्या आप वाक़ई\n"
+"खाता\"%1\" को मिटाना चाहते हैं?"
+
+#: modems.cpp:217
+#, fuzzy
+msgid "New Modem"
+msgstr "मॉडम रीसेट करें"
+
+#: modems.cpp:220
+#, fuzzy
+msgid "Edit Modem: "
+msgstr "मॉडम कमांड का संपादन करें"
+
+#: modems.cpp:225
+msgid "&Device"
+msgstr "उपकरण (&D)"
+
+#: modems.cpp:225
+msgid "Serial Device"
+msgstr "सीरियल उपकरण"
+
+#: modems.cpp:226
+msgid "Modem Settings"
+msgstr "मॉडम विन्यास"
+
+#: modems.cpp:241
+#, fuzzy
+msgid ""
+"You must enter a unique\n"
+"modem name"
+msgstr ""
+"आपको एक विशिष्ट\n"
+"खाता नाम प्रविष्ट करना होगा"
+
+#: pppdargs.cpp:46
+msgid "Customize pppd Arguments"
+msgstr "मनपसंद पीपीपीडी आर्गुमेंट्स"
+
+#: pppdargs.cpp:59
+msgid "Arg&ument:"
+msgstr "आर्गुमेंटः (&u)"
+
+#: pppdata.cpp:63
+msgid ""
+"The application-specific config file could not be opened in either read-write "
+"or read-only mode.\n"
+"The superuser might have to change its ownership by issuing the following "
+"command in your home directory:\n"
+"chown {YourUsername} .kde/share/config/kppprc"
+msgstr ""
+
+#: pppdata.cpp:501 pppdata.cpp:1029
+msgid "%1_copy"
+msgstr "%1_नक़ल"
+
+#: ppplog.cpp:61
+msgid "Cannot open any of the following logfiles:"
+msgstr "निम्न में से किसी भी लॉग फ़ाइल को खोल नहीं सकाः"
+
+#: ppplog.cpp:135
+msgid ""
+"You have launched pppd before the remote server was ready to establish a PPP "
+"connection.\n"
+"Please use the terminal-based login to verify"
+msgstr ""
+
+#: ppplog.cpp:140
+msgid "You haven't started the PPP software on the peer system."
+msgstr "आपने पीअर तंत्र में पीपीपी सॉफ्टवेयर प्रारंभ नहीं किया है."
+
+#: ppplog.cpp:143
+#, fuzzy
+msgid "Check that you supplied the correct username and password."
+msgstr "जाँचें कि आपने सही उपयोक्ता नाम और पासवर्ड दिया है!"
+
+#: ppplog.cpp:146
+msgid ""
+"You shouldn't pass 'lock' as an argument to pppd. Check /etc/ppp/options and "
+"~/.ppprc"
+msgstr ""
+
+#: ppplog.cpp:150
+msgid ""
+"The remote system does not seem to answer to\n"
+"configuration request. Contact your provider."
+msgstr ""
+
+#: ppplog.cpp:154
+msgid ""
+"You have passed an invalid option to pppd. See 'man pppd' for a complete list "
+"of valid arguments."
+msgstr ""
+
+#: ppplog.cpp:172
+msgid ""
+"Notice that the remote system has sent the following message:\n"
+"\"%1\"\n"
+"This may give you a hint why the the connection has failed."
+msgstr ""
+
+#: ppplog.cpp:191
+msgid "Unable to provide help."
+msgstr "मदद प्रदान करने में असमर्थ रहा."
+
+#: ppplog.cpp:215
+msgid ""
+"KPPP could not prepare a PPP log. It's very likely that pppd was started "
+"without the \"debug\" option.\n"
+"Without this option it's difficult to find out PPP problems, so you should turn "
+"on the debug option.\n"
+"Shall I turn it on now?"
+msgstr ""
+
+#: ppplog.cpp:219
+#, fuzzy
+msgid "Restart pppd"
+msgstr "पीपीडी चालू किया जा रहा है..."
+
+#: ppplog.cpp:219
+msgid "Do Not Restart"
+msgstr ""
+
+#: ppplog.cpp:224
+msgid ""
+"The \"debug\" option has been added. You should now try to reconnect. If that "
+"fails again, you will get a PPP log that may help you to track down the "
+"connection problem."
+msgstr ""
+
+#: ppplog.cpp:238
+msgid "PPP Log"
+msgstr "पीपीपी लॉग"
+
+#: ppplog.cpp:242
+msgid "kppp's diagnosis (just guessing):"
+msgstr "के-पीपीपी का निदान (सिर्फ अनुमान लगा रहे):"
+
+#: ppplog.cpp:247
+msgid "Write to File"
+msgstr "फ़ाइल पर लिखें"
+
+#: ppplog.cpp:281
+msgid ""
+"The PPP log has been saved\n"
+"as \"%1\"!\n"
+"\n"
+"If you want to send a bug report, or have\n"
+"problems connecting to the Internet, please\n"
+"attach this file. It will help the maintainers\n"
+"to find the bug and to improve KPPP"
+msgstr ""
+
+#: pppstatdlg.cpp:55
+msgid "kppp Statistics"
+msgstr "के-पीपीपी आंकड़े"
+
+#: pppstatdlg.cpp:61
+msgid "Statistics"
+msgstr "आंकड़े"
+
+#: pppstatdlg.cpp:89
+msgid "Local Addr:"
+msgstr "स्थानीय पताः"
+
+#: pppstatdlg.cpp:95
+msgid "Remote Addr:"
+msgstr "रिमोट पताः"
+
+#: pppstatdlg.cpp:122
+msgid "bytes in"
+msgstr "बाइट्स आए"
+
+#: pppstatdlg.cpp:123
+msgid "bytes out"
+msgstr "बाइट्स गए"
+
+#: pppstatdlg.cpp:125
+msgid "packets in"
+msgstr "पैकेट्स आए"
+
+#: pppstatdlg.cpp:126
+msgid "packets out"
+msgstr "पैकेट्स गए"
+
+#: pppstatdlg.cpp:128
+msgid "vjcomp in"
+msgstr "वीजेकॉम्प आए"
+
+#: pppstatdlg.cpp:129
+msgid "vjcomp out"
+msgstr "वीजेकॉम्प गए"
+
+#: pppstatdlg.cpp:131
+msgid "vjunc in"
+msgstr "वीजंक आए"
+
+#: pppstatdlg.cpp:132
+msgid "vjunc out"
+msgstr "वीजंक गए"
+
+#: pppstatdlg.cpp:134
+msgid "vjerr"
+msgstr "vjerr"
+
+#: pppstatdlg.cpp:135
+msgid "non-vj"
+msgstr "नॉन-वीजे"
+
+#: pppstatdlg.cpp:292
+msgid "%1 (max. %2) kb/sec"
+msgstr "%1 (अधि. %2) केबी/सेक."
+
+#: pppstatdlg.cpp:408 pppstatdlg.cpp:415
+msgid "unavailable"
+msgstr "अनुपलब्ध "
+
+#: providerdb.cpp:168
+msgid ""
+"You will be asked a few questions on information\n"
+"which is needed to establish an Internet connection\n"
+"with your Internet Service Provider (ISP).\n"
+"\n"
+"Make sure you have the registration form from your\n"
+"ISP handy. If you have any problems, try the online\n"
+"help first. If any information is missing, contact\n"
+"your ISP."
+msgstr ""
+
+#: providerdb.cpp:186
+msgid ""
+"Select the location where you plan to use this\n"
+"account from the list below. If your country or\n"
+"location is not listed, you have to create the\n"
+"account with the normal, dialog based setup.\n"
+"\n"
+"If you click \"Cancel\", the dialog based setup\n"
+"will start."
+msgstr ""
+
+#: providerdb.cpp:264
+msgid ""
+"Select your Internet Service Provider (ISP) from\n"
+"the list below. If the ISP is not in this list,\n"
+"you have to click on \"Cancel\" and create this\n"
+"account using the normal, dialog-based setup.\n"
+"\n"
+"Click on \"Next\" when you have finished your\n"
+"selection."
+msgstr ""
+
+#: providerdb.cpp:339
+msgid ""
+"To log on to your ISP, kppp needs the username\n"
+"and the password you got from your ISP. Type\n"
+"in this information in the fields below.\n"
+"\n"
+"Word case is important here."
+msgstr ""
+
+#: providerdb.cpp:348
+msgid "Username:"
+msgstr "उपयोक्ता नाम:"
+
+#: providerdb.cpp:350
+msgid "Password:"
+msgstr "पासवर्ड: "
+
+#: providerdb.cpp:393
+msgid ""
+"If you need a special dial prefix (e.g. if you\n"
+"are using a telephone switch) you can specify\n"
+"it here. This prefix is dialed just before the\n"
+"phone number.\n"
+"\n"
+"If you have a telephone switch, you probably need\n"
+"to write \"0\" or \"0,\" here."
+msgstr ""
+
+#: providerdb.cpp:404
+msgid "Dial prefix:"
+msgstr "डायल उपसर्गः"
+
+#: providerdb.cpp:429
+msgid ""
+"Finished!\n"
+"\n"
+"A new account has been created. Click \"Finish\" to\n"
+"go back to the setup dialog. If you want to\n"
+"check the settings of the newly created account,\n"
+"you can use \"Edit\" in the setup dialog."
+msgstr ""
+
+#: ruleset.cpp:538
+msgid ""
+"kppp: no rulefile specified\n"
+msgstr ""
+"के-पीपीपीः कोई नियम-फ़ाइल निर्दिष्ट नहीं है\n"
+
+#: ruleset.cpp:544
+#, c-format
+msgid ""
+"kppp: rulefile \"%s\" not found\n"
+msgstr ""
+"के-पीपीपी: नियमफ़ाइल \"%s\" नहीं मिला\n"
+
+#: ruleset.cpp:549
+msgid ""
+"kppp: rulefiles must have the extension \".rst\"\n"
+msgstr ""
+"के-पीपीपी: नियमफ़ाइल में एक्सटेंशन होना चाहिए \".rst\"\n"
+
+#: ruleset.cpp:558
+msgid ""
+"kppp: error parsing the ruleset\n"
+msgstr ""
+"के-पीपीपी: रूलसेट पारसिंग करने में त्रुटि\n"
+
+#: ruleset.cpp:563
+#, c-format
+msgid ""
+"kppp: parse error in line %d\n"
+msgstr ""
+"के-पीपीपी: पारसिंग त्रुटि पंक्ति %d पर\n"
+
+#: ruleset.cpp:569
+msgid ""
+"kppp: rulefile does not contain a default rule\n"
+msgstr ""
+"के-पीपीपी: नियमफ़ाइल में डिफ़ॉल्ट नियम नहीं है\n"
+
+#: ruleset.cpp:574
+msgid ""
+"kppp: rulefile does not contain a \"name=...\" line\n"
+msgstr ""
+"के-पीपीपी: नियमफ़ाइल में \"name=...\" पंक्ति नहीं है\n"
+
+#: ruleset.cpp:578
+msgid ""
+"kppp: rulefile is ok\n"
+msgstr ""
+"के-पीपीपी: नियमफ़ाइल ठीक है\n"
+
+#: runtests.cpp:219
+msgid ""
+"You're not allowed to dial out with kppp.\n"
+"Contact your system administrator."
+msgstr ""
+
+#: runtests.cpp:230
+msgid ""
+"Cannot find the PPP daemon!\n"
+"Make sure that pppd is installed."
+msgstr ""
+"पीपीपी डेमन नहीं मिला!\n"
+"सुनिश्चित हों कि पीपीपीडी संस्थापित है."
+
+#: runtests.cpp:240
+msgid ""
+"You do not have the permission to start pppd!\n"
+"Contact your system administrator and ask to get access to pppd."
+msgstr ""
+
+#: runtests.cpp:253
+msgid ""
+"You don't have sufficient permission to run\n"
+"%1\n"
+"Please make sure that kppp is owned by root and has the SUID bit set."
+msgstr ""
+
+#: runtests.cpp:265
+msgid ""
+"%1 is missing or can't be read!\n"
+"Ask your system administrator to create this file (can be empty) with "
+"appropriate read and write permissions."
+msgstr ""
+
+#~ msgid "&Details..."
+#~ msgstr "विवरण... (&D)"