diff options
Diffstat (limited to 'tde-i18n-pa/messages/tdenetwork/kcmlanbrowser.po')
| -rw-r--r-- | tde-i18n-pa/messages/tdenetwork/kcmlanbrowser.po | 535 |
1 files changed, 265 insertions, 270 deletions
diff --git a/tde-i18n-pa/messages/tdenetwork/kcmlanbrowser.po b/tde-i18n-pa/messages/tdenetwork/kcmlanbrowser.po index 2a85b10e5ab..db9890cc8ea 100644 --- a/tde-i18n-pa/messages/tdenetwork/kcmlanbrowser.po +++ b/tde-i18n-pa/messages/tdenetwork/kcmlanbrowser.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: kcmlanbrowser\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-20 01:34+0100\n" "PO-Revision-Date: 2007-01-17 11:00+0530\n" "Last-Translator: A S Alam <aalam@users.sf.net>\n" "Language-Team: Punjabi <punjabi-l10n@lists.sf.net>\n" @@ -16,258 +16,45 @@ msgstr "" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: setupwizard.cpp:63 -msgid "LISa Network Neighborhood Setup" -msgstr "LISa ਨੈੱਟਵਰਕ ਗੁਆਂਢ ਸੰਰਚਨਾ" - -#: setupwizard.cpp:71 setupwizard.cpp:512 -msgid "Advanced Settings" -msgstr "ਤਕਨੀਕੀ ਸਥਾਪਨ" - -#: setupwizard.cpp:126 -msgid "" -"<qt>" -"<p>This wizard will ask you a few questions about your network.</p> " -"<p>Usually you can simply keep the suggested settings.</p> " -"<p>After you have finished the wizard, you will be able to browse and use " -"shared resources on your LAN, not only Samba/Windows shares, but also FTP, HTTP " -"and NFS resources exactly the same way.</p> " -"<p>Therefore you need to setup the <i>LAN Information Server</i> " -"(LISa) on your machine. Think of the LISa server as an FTP or HTTP server; it " -"has to be run by root, it should be started during the boot process and only " -"one LISa server can run on one machine.</qt>" -msgstr "" - -#: setupwizard.cpp:149 -msgid "" -"<qt>" -"<p>More than one network interface card was found on your system.</p>" -"<p>Please choose the one to which your LAN is connected.</p></qt>" -msgstr "" - -#: setupwizard.cpp:164 -msgid "" -"<qt>" -"<p><b>No network interface card was found on your system.</b></p>" -"<p>Possible reason: no network card is installed. You probably want to cancel " -"now or enter your IP address and network manually</p>Example: <code>" -"192.168.0.1/255.255.255.0</code>.</qt>" -msgstr "" - -#: setupwizard.cpp:185 -msgid "There are two ways LISa can search hosts on your network." -msgstr "ਆਪਣੇ ਨੈੱਟਵਰਕ ਤੇ LISa ਦੋ ਢੰਗਾਂ ਨਾਲ ਮੇਜ਼ਬਾਨ ਲੱਭ ਸਕਦਾ ਹੈ।" - -#: setupwizard.cpp:187 -msgid "Send pings" -msgstr "ਪਿੰਗ ਭੇਜਣਾ" - -#: setupwizard.cpp:188 -msgid "" -"All hosts with TCP/IP will respond," -"<br>whether or not they are samba servers." -"<br>Don't use it if your network is very large, i.e. more than 1000 hosts." -"<br>" -msgstr "" - -#: setupwizard.cpp:191 -msgid "Send NetBIOS broadcasts" -msgstr "NetBIOS ਪ੍ਰਸਾਰਿਤ ਕਰਨਾ" - -#: setupwizard.cpp:192 -msgid "" -"You need to have the samba package (nmblookup) installed." -"<br>Only samba/windows servers will respond." -"<br>This method is not very reliable." -"<br>You should enable it if you are part of a large network." -msgstr "" - -#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249 -#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340 -msgid "<b>If unsure, keep it as is.</b>" -msgstr "<b>ਜੇਕਰ ਯਕੀਨੀ ਨਾ ਹੋਵੇ ਤਾਂ ਇਸ ਨੂੰ ਰੱਖੋ।</b>" - -#: setupwizard.cpp:210 -msgid "" -"All IP addresses included in the specified range will be pinged." -"<br>If you are part of a small network, e.g. with network mask 255.255.255.0" -"<br>use your IP address/network mask." -"<br>" -msgstr "" - -#: setupwizard.cpp:215 -msgid "" -"<br>There are four ways to specify address ranges:" -"<br>1. IP address/network mask, like <code>192.168.0.0/255.255.255.0;</code>" -"<br>2. single IP addresses, like <code>10.0.0.23;</code>" -"<br>3. continuous ranges, like <code>10.0.1.0-10.0.1.200;</code>" -"<br>4. ranges for each part of the address, like <code>" -"10-10.1-5.1-25.1-3;</code>" -"<br>You can also enter combinations of 1 to 4, separated by \";\", like" -"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>" -"<br>" -msgstr "" - -#: setupwizard.cpp:236 -msgid "" -"This is a security related setting." -"<br>It provides a simple IP address based way to specify \"trusted\" hosts." -"<br>Only hosts which fit into the addresses given here are accepted by LISa as " -"clients. The list of hosts published by LISa will also only contain hosts which " -"fit into this scheme." -"<br>Usually you enter your IP address/network mask here." -msgstr "" - -#: setupwizard.cpp:258 -msgid "" -"<br>Enter your IP address and network mask here, like <code>" -"192.168.0.1/255.255.255.0</code>" -msgstr "" -"<br>ਆਪਣਾ IP ਸਿਰਨਾਵਾਂ ਅਤੇ ਨੈਟਵਰਕ ਮਾਸਕ ਇੱਥੇ ਦਿਓ, ਜਿਵੇਂ <code> " -"192.168.0.1/255.255.255.0</code>" - -#: setupwizard.cpp:261 -msgid "" -"<br>To reduce the network load, the LISa servers in one network" -"<br>cooperate with each other. Therefore you have to enter the broadcast" -"<br>address here. If you are connected to more than one network, choose " -"<br>one of the broadcast addresses." -msgstr "" - -#: setupwizard.cpp:280 -msgid "" -"<br>Enter the interval after which LISa, if busy, will update its host list." -msgstr "" - -#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284 -msgid " sec" -msgstr " ਸਕਿੰਟ" - -#: setupwizard.cpp:286 -msgid "" -"<br>Please note that the update interval will grow automatically by up to 16 " -"times the value you enter here, if nobody accesses the LISa server. So if you " -"enter 300 sec = 5 min here, this does not mean that LISa will ping your whole " -"network every 5 minutes. The interval will increase up to 16 x 5 min = 80 min." -msgstr "" - -#: setupwizard.cpp:305 -msgid "" -"This page contains several settings you usually only" -"<br>need if LISa doesn't find all hosts in your network." -msgstr "" - -#: setupwizard.cpp:308 -msgid "Re&port unnamed hosts" -msgstr "" - -#: setupwizard.cpp:309 +#: _translatorinfo:1 msgid "" -"Should hosts for which LISa can't resolve the name be included in the host " -"list?" -"<br>" -msgstr "" - -#: setupwizard.cpp:313 -msgid "Wait for replies after first scan" -msgstr "ਪਹਿਲੀ ਜਾਂਚ ਬਾਅਦ ਜਵਾਬ ਦੀ ਉਡੀਕ" - -#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115 -#: setupwizard.cpp:315 setupwizard.cpp:333 -msgid " ms" -msgstr " ms" - -#: setupwizard.cpp:316 -msgid "" -"How long should LISa wait for answers to pings?" -"<br>If LISa doesn't find all hosts, try to increase this value." -"<br>" -msgstr "" - -#: setupwizard.cpp:320 -msgid "Max. number of pings to send at once" -msgstr "ਇੱਕ ਵਾਰ ਅਧਿਕਤਮ ਭੇਜਣ ਵਾਲੀ ਪਿੰਗ ਕਮਾਂਡ ਦੀ ਗਿਣਤੀ" - -#: setupwizard.cpp:323 -msgid "" -"How many ping packets should LISa send at once?" -"<br>If LISa doesn't find all hosts you could try to decrease this value." -"<br>" -msgstr "" - -#: setupwizard.cpp:326 -msgid "Al&ways scan twice" -msgstr "ਹਮੇਸ਼ਾ ਦੋ ਵਾਰ ਜਾਂਚੋ(&w)" - -#: setupwizard.cpp:330 -msgid "Wait for replies after second scan" -msgstr "ਦੂਜੀ ਜਾਂਚ ਤੋਂ ਪਹਿਲਾਂ ਜਵਾਬ ਦੀ ਉਡੀਕ ਕਰੋ" - -#: setupwizard.cpp:334 -msgid "If LISa doesn't find all hosts, enable this option." +"_: NAME OF TRANSLATORS\n" +"Your names" msgstr "" -#: setupwizard.cpp:350 +#: _translatorinfo:2 msgid "" -"<br>Your LAN browsing has been successfully set up." -"<br>" -"<br>Make sure that the LISa server is started during the boot process. How this " -"is done depends on your distribution and OS. Usually you have to insert it " -"somewhere in a boot script under <code>/etc</code>." -"<br>Start the LISa server as root and without any command line options." -"<br>The config file will now be saved to <code>/etc/lisarc</code>." -"<br>To test the server, try <code>lan:/</code> in Konqueror." -"<br>" -"<br>If you have problems or suggestions, visit " -"http://lisa-home.sourceforge.net." -msgstr "" - -#: setupwizard.cpp:437 -msgid "Congratulations!" -msgstr "ਮੁਬਾਰਕ!" - -#: setupwizard.cpp:462 -msgid "You can use the same syntax as on the previous page.<br>" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" msgstr "" -#: setupwizard.cpp:464 -msgid "" -"There are three ways to specify IP addresses:" -"<br>1. IP address/network mask, like<code> 192.168.0.0/255.255.255.0;</code>" -"<br>2. continuous ranges, like<code> 10.0.1.0-10.0.1.200;</code>" -"<br>3. single IP addresses, like<code> 10.0.0.23;</code>" -"<br>You can also enter combinations of 1 to 3, separated by \";\", " -"<br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>" -"<br>" -msgstr "" - -#: setupwizard.cpp:490 -msgid "Multiple Network Interfaces Found" -msgstr "ਬਹੁ ਨੈਟਵਰਕ ਇੰਟਰਫੇਸ ਮਿਲਿਆ" +#: findnic.cpp:107 findnic.cpp:174 +msgid "Up" +msgstr "ਉੱਪਰ" -#: setupwizard.cpp:493 -msgid "No Network Interface Found" -msgstr "ਕਈ ਨੈੱਟਵਰਕ ਇੰਟਰਫੇਸ ਨਹੀਂ ਲੱਭਾ" +#: findnic.cpp:109 findnic.cpp:176 +msgid "Down" +msgstr "ਹੇਠਾਂ" -#: setupwizard.cpp:498 -msgid "Specify Search Method" -msgstr "ਖਾਸ ਖੋਜ ਢੰਗ ਨਿਰਧਾਰਨ" +#: findnic.cpp:112 findnic.cpp:280 +msgid "Broadcast" +msgstr "ਪ੍ਰਸਾਰਿਤ" -#: setupwizard.cpp:501 -msgid "Specify Address Range LISa Will Ping" -msgstr "" +#: findnic.cpp:114 findnic.cpp:273 +msgid "Point to Point" +msgstr "ਪੁਆਇੰਟ ਤੋਂ ਪੁਆਇੰਟ(P2P)" -#: setupwizard.cpp:504 -msgid "\"Trusted\" Hosts" -msgstr "\"Trusted\" ਮੇਜ਼ਬਾਨ" +#: findnic.cpp:117 findnic.cpp:287 +msgid "Multicast" +msgstr "ਮਲਟੀਕਾਸਟ" -#: setupwizard.cpp:507 -msgid "Your Broadcast Address" -msgstr "ਤੁਹਾਡਾ ਪ੍ਰਸਾਰਨ ਸਿਰਨਾਵਾਂ" +#: findnic.cpp:120 findnic.cpp:294 +msgid "Loopback" +msgstr "ਲੂਪਬੈਕ" -#: setupwizard.cpp:510 -msgid "LISa Update Interval" -msgstr "LISa ਨਵੀਨੀਕਰਨ ਅੰਤਰਾਲ" +#: findnic.cpp:122 findnic.cpp:134 +msgid "Unknown" +msgstr "ਅਣਜਾਣ" #: kcmlisa.cpp:63 msgid "Tell LISa Daemon How to Search for Hosts" @@ -352,6 +139,10 @@ msgstr "" msgid "Search hosts after this number of seconds" msgstr "" +#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284 +msgid " sec" +msgstr " ਸਕਿੰਟ" + #: kcmlisa.cpp:141 kcmreslisa.cpp:103 msgid "Always check twice for hosts when searching" msgstr "" @@ -365,6 +156,11 @@ msgstr "" msgid "How long to wait for replies to the ICMP echo requests from hosts" msgstr "" +#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115 +#: setupwizard.cpp:315 setupwizard.cpp:333 +msgid " ms" +msgstr " ms" + #: kcmlisa.cpp:150 kcmreslisa.cpp:112 msgid "Wait for replies from hosts after second scan:" msgstr "" @@ -383,12 +179,9 @@ msgstr "ਕੋਈ ਨੈੱਟਵਰਕ ਇੰਟਰਫੇਸ ਕਾਰਡ ਨ #: kcmlisa.cpp:332 kcmreslisa.cpp:232 msgid "" -"You have more than one network interface installed." -"<br>Please make sure the suggested settings are correct." -"<br>" -"<br>The following interfaces were found:" -"<br>" -"<br>" +"You have more than one network interface installed.<br>Please make sure the " +"suggested settings are correct.<br><br>The following interfaces were found:" +"<br><br>" msgstr "" #: kcmlisa.cpp:381 @@ -438,8 +231,8 @@ msgstr "" #: kcmreslisa.cpp:242 msgid "" -"The ResLISa daemon is now configured correctly, hopefully." -"<br>Make sure that the reslisa binary is installed <i>suid root</i>." +"The ResLISa daemon is now configured correctly, hopefully.<br>Make sure that " +"the reslisa binary is installed <i>suid root</i>." msgstr "" #: kcmtdeiolan.cpp:41 @@ -486,30 +279,232 @@ msgstr "ਹਮੇਸ਼ਾ" msgid "Never" msgstr "ਕਦੇ ਨਹੀਂ" -#: findnic.cpp:107 findnic.cpp:174 -msgid "Up" -msgstr "ਉੱਪਰ" +#: setupwizard.cpp:63 +msgid "LISa Network Neighborhood Setup" +msgstr "LISa ਨੈੱਟਵਰਕ ਗੁਆਂਢ ਸੰਰਚਨਾ" -#: findnic.cpp:109 findnic.cpp:176 -msgid "Down" -msgstr "ਹੇਠਾਂ" +#: setupwizard.cpp:71 setupwizard.cpp:512 +msgid "Advanced Settings" +msgstr "ਤਕਨੀਕੀ ਸਥਾਪਨ" -#: findnic.cpp:112 findnic.cpp:280 -msgid "Broadcast" -msgstr "ਪ੍ਰਸਾਰਿਤ" +#: setupwizard.cpp:126 +msgid "" +"<qt><p>This wizard will ask you a few questions about your network.</p> " +"<p>Usually you can simply keep the suggested settings.</p> <p>After you have " +"finished the wizard, you will be able to browse and use shared resources on " +"your LAN, not only Samba/Windows shares, but also FTP, HTTP and NFS " +"resources exactly the same way.</p> <p>Therefore you need to setup the " +"<i>LAN Information Server</i> (LISa) on your machine. Think of the LISa " +"server as an FTP or HTTP server; it has to be run by root, it should be " +"started during the boot process and only one LISa server can run on one " +"machine.</qt>" +msgstr "" -#: findnic.cpp:114 findnic.cpp:273 -msgid "Point to Point" -msgstr "ਪੁਆਇੰਟ ਤੋਂ ਪੁਆਇੰਟ(P2P)" +#: setupwizard.cpp:149 +msgid "" +"<qt><p>More than one network interface card was found on your system.</" +"p><p>Please choose the one to which your LAN is connected.</p></qt>" +msgstr "" -#: findnic.cpp:117 findnic.cpp:287 -msgid "Multicast" -msgstr "ਮਲਟੀਕਾਸਟ" +#: setupwizard.cpp:164 +msgid "" +"<qt><p><b>No network interface card was found on your system.</b></" +"p><p>Possible reason: no network card is installed. You probably want to " +"cancel now or enter your IP address and network manually</p>Example: " +"<code>192.168.0.1/255.255.255.0</code>.</qt>" +msgstr "" -#: findnic.cpp:120 findnic.cpp:294 -msgid "Loopback" -msgstr "ਲੂਪਬੈਕ" +#: setupwizard.cpp:185 +msgid "There are two ways LISa can search hosts on your network." +msgstr "ਆਪਣੇ ਨੈੱਟਵਰਕ ਤੇ LISa ਦੋ ਢੰਗਾਂ ਨਾਲ ਮੇਜ਼ਬਾਨ ਲੱਭ ਸਕਦਾ ਹੈ।" -#: findnic.cpp:122 findnic.cpp:134 -msgid "Unknown" -msgstr "ਅਣਜਾਣ" +#: setupwizard.cpp:187 +msgid "Send pings" +msgstr "ਪਿੰਗ ਭੇਜਣਾ" + +#: setupwizard.cpp:188 +msgid "" +"All hosts with TCP/IP will respond,<br>whether or not they are samba servers." +"<br>Don't use it if your network is very large, i.e. more than 1000 hosts." +"<br>" +msgstr "" + +#: setupwizard.cpp:191 +msgid "Send NetBIOS broadcasts" +msgstr "NetBIOS ਪ੍ਰਸਾਰਿਤ ਕਰਨਾ" + +#: setupwizard.cpp:192 +msgid "" +"You need to have the samba package (nmblookup) installed.<br>Only samba/" +"windows servers will respond.<br>This method is not very reliable.<br>You " +"should enable it if you are part of a large network." +msgstr "" + +#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249 +#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340 +msgid "<b>If unsure, keep it as is.</b>" +msgstr "<b>ਜੇਕਰ ਯਕੀਨੀ ਨਾ ਹੋਵੇ ਤਾਂ ਇਸ ਨੂੰ ਰੱਖੋ।</b>" + +#: setupwizard.cpp:210 +msgid "" +"All IP addresses included in the specified range will be pinged.<br>If you " +"are part of a small network, e.g. with network mask 255.255.255.0<br>use " +"your IP address/network mask.<br>" +msgstr "" + +#: setupwizard.cpp:215 +msgid "" +"<br>There are four ways to specify address ranges:<br>1. IP address/network " +"mask, like <code>192.168.0.0/255.255.255.0;</code><br>2. single IP " +"addresses, like <code>10.0.0.23;</code><br>3. continuous ranges, like " +"<code>10.0.1.0-10.0.1.200;</code><br>4. ranges for each part of the address, " +"like <code>10-10.1-5.1-25.1-3;</code><br>You can also enter combinations of " +"1 to 4, separated by \";\", " +"like<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</" +"code><br>" +msgstr "" + +#: setupwizard.cpp:236 +msgid "" +"This is a security related setting.<br>It provides a simple IP address based " +"way to specify \"trusted\" hosts.<br>Only hosts which fit into the addresses " +"given here are accepted by LISa as clients. The list of hosts published by " +"LISa will also only contain hosts which fit into this scheme.<br>Usually you " +"enter your IP address/network mask here." +msgstr "" + +#: setupwizard.cpp:258 +msgid "" +"<br>Enter your IP address and network mask here, like " +"<code>192.168.0.1/255.255.255.0</code>" +msgstr "" +"<br>ਆਪਣਾ IP ਸਿਰਨਾਵਾਂ ਅਤੇ ਨੈਟਵਰਕ ਮਾਸਕ ਇੱਥੇ ਦਿਓ, ਜਿਵੇਂ <code> " +"192.168.0.1/255.255.255.0</code>" + +#: setupwizard.cpp:261 +msgid "" +"<br>To reduce the network load, the LISa servers in one network<br>cooperate " +"with each other. Therefore you have to enter the broadcast<br>address here. " +"If you are connected to more than one network, choose <br>one of the " +"broadcast addresses." +msgstr "" + +#: setupwizard.cpp:280 +msgid "" +"<br>Enter the interval after which LISa, if busy, will update its host list." +msgstr "" + +#: setupwizard.cpp:286 +msgid "" +"<br>Please note that the update interval will grow automatically by up to 16 " +"times the value you enter here, if nobody accesses the LISa server. So if " +"you enter 300 sec = 5 min here, this does not mean that LISa will ping your " +"whole network every 5 minutes. The interval will increase up to 16 x 5 min = " +"80 min." +msgstr "" + +#: setupwizard.cpp:305 +msgid "" +"This page contains several settings you usually only<br>need if LISa doesn't " +"find all hosts in your network." +msgstr "" + +#: setupwizard.cpp:308 +msgid "Re&port unnamed hosts" +msgstr "" + +#: setupwizard.cpp:309 +msgid "" +"Should hosts for which LISa can't resolve the name be included in the host " +"list?<br>" +msgstr "" + +#: setupwizard.cpp:313 +msgid "Wait for replies after first scan" +msgstr "ਪਹਿਲੀ ਜਾਂਚ ਬਾਅਦ ਜਵਾਬ ਦੀ ਉਡੀਕ" + +#: setupwizard.cpp:316 +msgid "" +"How long should LISa wait for answers to pings?<br>If LISa doesn't find all " +"hosts, try to increase this value.<br>" +msgstr "" + +#: setupwizard.cpp:320 +msgid "Max. number of pings to send at once" +msgstr "ਇੱਕ ਵਾਰ ਅਧਿਕਤਮ ਭੇਜਣ ਵਾਲੀ ਪਿੰਗ ਕਮਾਂਡ ਦੀ ਗਿਣਤੀ" + +#: setupwizard.cpp:323 +msgid "" +"How many ping packets should LISa send at once?<br>If LISa doesn't find all " +"hosts you could try to decrease this value.<br>" +msgstr "" + +#: setupwizard.cpp:326 +msgid "Al&ways scan twice" +msgstr "ਹਮੇਸ਼ਾ ਦੋ ਵਾਰ ਜਾਂਚੋ(&w)" + +#: setupwizard.cpp:330 +msgid "Wait for replies after second scan" +msgstr "ਦੂਜੀ ਜਾਂਚ ਤੋਂ ਪਹਿਲਾਂ ਜਵਾਬ ਦੀ ਉਡੀਕ ਕਰੋ" + +#: setupwizard.cpp:334 +msgid "If LISa doesn't find all hosts, enable this option." +msgstr "" + +#: setupwizard.cpp:350 +msgid "" +"<br>Your LAN browsing has been successfully set up.<br><br>Make sure that " +"the LISa server is started during the boot process. How this is done depends " +"on your distribution and OS. Usually you have to insert it somewhere in a " +"boot script under <code>/etc</code>.<br>Start the LISa server as root and " +"without any command line options.<br>The config file will now be saved to " +"<code>/etc/lisarc</code>.<br>To test the server, try <code>lan:/</code> in " +"Konqueror.<br><br>If you have problems or suggestions, visit http://lisa-" +"home.sourceforge.net." +msgstr "" + +#: setupwizard.cpp:437 +msgid "Congratulations!" +msgstr "ਮੁਬਾਰਕ!" + +#: setupwizard.cpp:462 +msgid "You can use the same syntax as on the previous page.<br>" +msgstr "" + +#: setupwizard.cpp:464 +msgid "" +"There are three ways to specify IP addresses:<br>1. IP address/network mask, " +"like<code> 192.168.0.0/255.255.255.0;</code><br>2. continuous ranges, " +"like<code> 10.0.1.0-10.0.1.200;</code><br>3. single IP addresses, like<code> " +"10.0.0.23;</code><br>You can also enter combinations of 1 to 3, separated by " +"\";\", <br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;" +"</code><br>" +msgstr "" + +#: setupwizard.cpp:490 +msgid "Multiple Network Interfaces Found" +msgstr "ਬਹੁ ਨੈਟਵਰਕ ਇੰਟਰਫੇਸ ਮਿਲਿਆ" + +#: setupwizard.cpp:493 +msgid "No Network Interface Found" +msgstr "ਕਈ ਨੈੱਟਵਰਕ ਇੰਟਰਫੇਸ ਨਹੀਂ ਲੱਭਾ" + +#: setupwizard.cpp:498 +msgid "Specify Search Method" +msgstr "ਖਾਸ ਖੋਜ ਢੰਗ ਨਿਰਧਾਰਨ" + +#: setupwizard.cpp:501 +msgid "Specify Address Range LISa Will Ping" +msgstr "" + +#: setupwizard.cpp:504 +msgid "\"Trusted\" Hosts" +msgstr "\"Trusted\" ਮੇਜ਼ਬਾਨ" + +#: setupwizard.cpp:507 +msgid "Your Broadcast Address" +msgstr "ਤੁਹਾਡਾ ਪ੍ਰਸਾਰਨ ਸਿਰਨਾਵਾਂ" + +#: setupwizard.cpp:510 +msgid "LISa Update Interval" +msgstr "LISa ਨਵੀਨੀਕਰਨ ਅੰਤਰਾਲ" |