diff options
Diffstat (limited to 'tde-i18n-se/messages/tdeadmin/kcmlilo.po')
| -rw-r--r-- | tde-i18n-se/messages/tdeadmin/kcmlilo.po | 210 |
1 files changed, 108 insertions, 102 deletions
diff --git a/tde-i18n-se/messages/tdeadmin/kcmlilo.po b/tde-i18n-se/messages/tdeadmin/kcmlilo.po index eaadfe89c6a..b4e57258077 100644 --- a/tde-i18n-se/messages/tdeadmin/kcmlilo.po +++ b/tde-i18n-se/messages/tdeadmin/kcmlilo.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: kcmlilo\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-13 14:15+0100\n" "PO-Revision-Date: 2007-03-06 22:51+0100\n" "Last-Translator: Børre Gaup <boerre@skolelinux.no>\n" "Language-Team: Northern Sami <i18n-sme@lister.ping.uio.no>\n" @@ -16,6 +16,18 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "Børre Gaup" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "boerre@skolelinux.no" + #: kde-qt-common/EditWidget.cpp:43 msgid "Select..." msgstr "Vállje …" @@ -25,8 +37,8 @@ msgid "" "You can edit the lilo.conf file directly here. All changes you make here are " "automatically transferred to the graphical interface." msgstr "" -"Sáhtát doaimmahit lilo.conf fiilla njuolgat dáppe. Buot rievdadusaid maid dagat " -"automáhtalaččat oidno gráfalaš lavttas." +"Sáhtát doaimmahit lilo.conf fiilla njuolgat dáppe. Buot rievdadusaid maid " +"dagat automáhtalaččat oidno gráfalaš lavttas." #: kde-qt-common/general.cpp:45 msgid "Install &boot record to drive/partition:" @@ -34,18 +46,17 @@ msgstr "Sajáiduhte «&boot record» skearrui/partišuvdnii:" #: kde-qt-common/general.cpp:55 msgid "" -"Select the drive or partition you want to install the LILO boot loader to here. " -"Unless you intend to use other boot managers in addition to LILO, this should " -"be the MBR (master boot record) of your boot drive." -"<br>In this case, you should probably select <i>/dev/hda</i> " -"if your boot drive is an IDE drive or <i>/dev/sda</i> " -"if your boot drive is SCSI." -msgstr "" -"Vállje guđe skearrui dahje partišuvdnii masa háliidat sajáiduhttit LILO. Jos it " -"áiggu geavahit eará vuolggahangieđahalliid erret LILO, de berret válljet MBR " -"(«master boot record»).\n" -"<br>Dalle berret válljet <i>/dev/hda</i> jos vuolggahat IDE-skearrus dahje <i>" -"/dev/sda</i> jos vuolggahat vuogádaga SCSI-skearrus." +"Select the drive or partition you want to install the LILO boot loader to " +"here. Unless you intend to use other boot managers in addition to LILO, this " +"should be the MBR (master boot record) of your boot drive.<br>In this case, " +"you should probably select <i>/dev/hda</i> if your boot drive is an IDE " +"drive or <i>/dev/sda</i> if your boot drive is SCSI." +msgstr "" +"Vállje guđe skearrui dahje partišuvdnii masa háliidat sajáiduhttit LILO. Jos " +"it áiggu geavahit eará vuolggahangieđahalliid erret LILO, de berret válljet " +"MBR («master boot record»).\n" +"<br>Dalle berret válljet <i>/dev/hda</i> jos vuolggahat IDE-skearrus dahje " +"<i>/dev/sda</i> jos vuolggahat vuogádaga SCSI-skearrus." #: kde-qt-common/general.cpp:58 msgid "Boot the default kernel/OS &after:" @@ -57,11 +68,11 @@ msgstr "/10 sekundda" #: kde-qt-common/general.cpp:64 msgid "" -"LILO will wait the amount of time specified here before booting the kernel (or " -"OS) marked as <i>default</i> in the <b>Images</b> tab." +"LILO will wait the amount of time specified here before booting the kernel " +"(or OS) marked as <i>default</i> in the <b>Images</b> tab." msgstr "" -"LILO vuordá nu guhkká go mearridat dáppe ovdal go vuolggaha coahku (dahje OV) " -"merkejuvvon <i>standárdan</i> <b>Álggahanfiillat</b>-gilkoris." +"LILO vuordá nu guhkká go mearridat dáppe ovdal go vuolggaha coahku (dahje " +"OV) merkejuvvon <i>standárdan</i> <b>Álggahanfiillat</b>-gilkoris." #: kde-qt-common/general.cpp:67 msgid "Use &linear mode" @@ -69,12 +80,11 @@ msgstr "Geavat «&linear»-doaibmanvuogi" #: kde-qt-common/general.cpp:69 msgid "" -"Check this box if you want to use the linear mode." -"<br>Linear mode tells the boot loader the location of kernels in linear " -"addressing rather than sector/head/cylinder." -"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless " -"you're planning to create a boot disk to be used with a different computer." -"<br>See the lilo.conf man page for details." +"Check this box if you want to use the linear mode.<br>Linear mode tells the " +"boot loader the location of kernels in linear addressing rather than sector/" +"head/cylinder.<br>linear mode is required for some SCSI drives, and " +"shouldn't hurt unless you're planning to create a boot disk to be used with " +"a different computer.<br>See the lilo.conf man page for details." msgstr "" #: kde-qt-common/general.cpp:70 @@ -83,10 +93,10 @@ msgstr "Geavat «&compact»-doaibmanvuogi" #: kde-qt-common/general.cpp:72 msgid "" -"Check this box if you want to use the compact mode." -"<br>The compact mode tries to merge read requests for adjacent sectors into a " -"single read request. This reduces load time and keeps the boot map smaller, but " -"will not work on all systems." +"Check this box if you want to use the compact mode.<br>The compact mode " +"tries to merge read requests for adjacent sectors into a single read " +"request. This reduces load time and keeps the boot map smaller, but will not " +"work on all systems." msgstr "" #: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85 @@ -96,8 +106,8 @@ msgstr "" #: kde-qt-common/general.cpp:78 msgid "" "Checking this box enables automatic recording of boot command lines as the " -"defaults for the following boots. This way, lilo \"locks\" on a choice until it " -"is manually overridden.\n" +"defaults for the following boots. This way, lilo \"locks\" on a choice until " +"it is manually overridden.\n" "This sets the <b>lock</b> option in lilo.conf." msgstr "" @@ -108,12 +118,11 @@ msgstr "&Rádje paramehteriid" #: kde-qt-common/general.cpp:82 msgid "" "If this box is checked, a password (entered below) is required only if any " -"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>" -"linux single</i> or <i>linux init=/bin/sh</i>).\n" -"This sets the <b>restricted</b> option in lilo.conf." -"<br>This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>" -"Details</i>." +"parameters are changed (i.e. the user can boot <i>linux</i>, but not " +"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n" +"This sets the <b>restricted</b> option in lilo.conf.<br>This sets a default " +"for all Linux kernels you want to boot. If you need a per-kernel setting, go " +"to the <i>Operating systems</i> tab and select <i>Details</i>." msgstr "" #: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93 @@ -126,10 +135,9 @@ msgid "" "above is checked, the password is required for additional parameters only." "<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. " "You'll want to make sure nobody untrusted can read this file. Also, you " -"probably don't want to use your normal/root password here." -"<br>This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>" -"Details</i>." +"probably don't want to use your normal/root password here.<br>This sets a " +"default for all Linux kernels you want to boot. If you need a per-kernel " +"setting, go to the <i>Operating systems</i> tab and select <i>Details</i>." msgstr "" #: kde-qt-common/general.cpp:97 @@ -138,13 +146,12 @@ msgstr "" #: kde-qt-common/general.cpp:100 msgid "" -"You can select the default graphics mode here." -"<br>If you intend to use a VGA graphics mode, you must compile the kernel with " -"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at " -"boot time." -"<br>This sets a default for all Linux kernels you want to boot. If you need a " -"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>" -"Details</i>." +"You can select the default graphics mode here.<br>If you intend to use a VGA " +"graphics mode, you must compile the kernel with support for framebuffer " +"devices. The <i>ask</i> setting brings up a prompt at boot time.<br>This " +"sets a default for all Linux kernels you want to boot. If you need a per-" +"kernel setting, go to the <i>Operating systems</i> tab and select " +"<i>Details</i>." msgstr "" #: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48 @@ -259,8 +266,8 @@ msgstr "" msgid "" "If this box is checked, LILO goes to the LILO prompt whether or not a key is " "pressed. If it is turned off, LILO boots the default operating system unless " -"shift is pressed (in that case, it goes to the LILO prompt)." -"<br>This sets the <i>prompt</i> option in lilo.conf." +"shift is pressed (in that case, it goes to the LILO prompt).<br>This sets " +"the <i>prompt</i> option in lilo.conf." msgstr "" #: kde-qt-common/images.cpp:53 @@ -292,8 +299,8 @@ msgstr "&Ruohtas-fiilavuogádat:" #: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189 msgid "" -"Enter the root filesystem (i.e. the partition that will be mounted as / at boot " -"time) for the kernel you want to boot here." +"Enter the root filesystem (i.e. the partition that will be mounted as / at " +"boot time) for the kernel you want to boot here." msgstr "" #: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190 @@ -313,9 +320,8 @@ msgstr "L&iigeparamehterat:" #: kde-qt-common/images.cpp:72 msgid "" -"Enter any extra parameters you wish to pass to the kernel here. Usually, this " -"can be left blank." -"<br>This sets the <i>append</i> option in lilo.conf." +"Enter any extra parameters you wish to pass to the kernel here. Usually, " +"this can be left blank.<br>This sets the <i>append</i> option in lilo.conf." msgstr "" #: kde-qt-common/images.cpp:79 @@ -377,20 +383,16 @@ msgid "Remove entry from the boot menu" msgstr "Váldde eret merkoša vuolggahanfálus" #: kde-qt-common/images.cpp:177 -msgid "" -"Configuration ok. LILO said:\n" -msgstr "" -"Heivehus ortnegis. LILO dieđihii:\n" +msgid "Configuration ok. LILO said:\n" +msgstr "Heivehus ortnegis. LILO dieđihii:\n" #: kde-qt-common/images.cpp:178 msgid "Configuration OK" msgstr "Heivehus ortnegis" #: kde-qt-common/images.cpp:180 -msgid "" -"Configuration NOT ok. LILO said:\n" -msgstr "" -"Heivehus ii leat ortnegis. LILO dieđihii:\n" +msgid "Configuration NOT ok. LILO said:\n" +msgstr "Heivehus ii leat ortnegis. LILO dieđihii:\n" #: kde-qt-common/images.cpp:181 msgid "Configuration NOT ok" @@ -444,10 +446,9 @@ msgstr "" #: kde/Details.cpp:47 qt/Details.cpp:47 msgid "" -"You can select the graphics mode for this kernel here." -"<br>If you intend to use a VGA graphics mode, you must compile the kernel with " -"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at " -"boot time." +"You can select the graphics mode for this kernel here.<br>If you intend to " +"use a VGA graphics mode, you must compile the kernel with support for " +"framebuffer devices. The <i>ask</i> setting brings up a prompt at boot time." msgstr "" #: kde/Details.cpp:75 qt/Details.cpp:76 @@ -457,9 +458,9 @@ msgstr "Čana ruohtasfiilavuogádaga &dušše logahahtti" #: kde/Details.cpp:76 qt/Details.cpp:77 msgid "" "Mount the root filesystem for this kernel read-only. Since the init scripts " -"normally take care of remounting the root filesystem in read-write mode after " -"running some checks, this should always be turned on." -"<br>Don't turn this off unless you know what you're doing." +"normally take care of remounting the root filesystem in read-write mode " +"after running some checks, this should always be turned on.<br>Don't turn " +"this off unless you know what you're doing." msgstr "" #: kde/Details.cpp:78 qt/Details.cpp:80 @@ -469,26 +470,26 @@ msgstr "Ale dárkkis &partišuvdnatabealla" #: kde/Details.cpp:79 msgid "" -"This turns off some sanity checks while writing the configuration. This should " -"not be used under \"normal\" circumstances, but it can be useful, for example, " -"by providing the capability of booting from a floppy disk, without having a " -"floppy in the drive every time you run lilo." -"<br>This sets the <i>unsafe</i> keyword in lilo.conf." +"This turns off some sanity checks while writing the configuration. This " +"should not be used under \"normal\" circumstances, but it can be useful, for " +"example, by providing the capability of booting from a floppy disk, without " +"having a floppy in the drive every time you run lilo.<br>This sets the " +"<i>unsafe</i> keyword in lilo.conf." msgstr "" #: kde/Details.cpp:83 qt/Details.cpp:86 msgid "" "Checking this box enables automatic recording of boot command lines as the " -"default for the following bootups. This way, lilo \"locks\" on a choice until " -"it is manually overridden." -"<br>This sets the <b>lock</b> option in lilo.conf" +"default for the following bootups. This way, lilo \"locks\" on a choice " +"until it is manually overridden.<br>This sets the <b>lock</b> option in lilo." +"conf" msgstr "" #: kde/Details.cpp:86 qt/Details.cpp:89 msgid "" "If this box is checked, a password (entered below) is required only if any " -"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>" -"linux single</i> or <i>linux init=/bin/sh</i>).\n" +"parameters are changed (i.e. the user can boot <i>linux</i>, but not " +"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n" "This sets the <b>restricted</b> option in lilo.conf." msgstr "" @@ -516,10 +517,19 @@ msgstr "© 2000 Bernhard Rosenkraenzer" #: qt/Details.cpp:81 msgid "" "This turns off some sanity checks while writing the configuration. This " -"shouldn't be used under \"normal\" circumstances, but it's useful, for example, " -"for installing the possibility to boot from a floppy disk without having a " -"floppy in the drive every time you run lilo." -"<br>This sets the <i>unsafe</i> keyword in lilo.conf." +"shouldn't be used under \"normal\" circumstances, but it's useful, for " +"example, for installing the possibility to boot from a floppy disk without " +"having a floppy in the drive every time you run lilo.<br>This sets the " +"<i>unsafe</i> keyword in lilo.conf." +msgstr "" + +#: qt/Details.cpp:102 qt/InputBox.cpp:47 qt/InputBox.cpp:52 +#: qt/standalone.cpp:58 +msgid "&OK" +msgstr "" + +#: qt/Details.cpp:103 qt/InputBox.cpp:48 qt/standalone.cpp:61 +msgid "&Cancel" msgstr "" #: qt/standalone.cpp:41 @@ -529,16 +539,20 @@ msgstr "&Mii dát leat?" #: qt/standalone.cpp:43 msgid "" -"The <i>What's This?</i> button is part of this program's help system. Click on " -"the What's This? button then on any widget in the window to get information " -"(like this) on it." +"The <i>What's This?</i> button is part of this program's help system. Click " +"on the What's This? button then on any widget in the window to get " +"information (like this) on it." +msgstr "" + +#: qt/standalone.cpp:45 +msgid "&Help" msgstr "" #: qt/standalone.cpp:47 msgid "" -"This button calls up the program's online help system. If it does nothing, no " -"help file has been written (yet); in that case, use the <i>What's This</i> " -"button on the left." +"This button calls up the program's online help system. If it does nothing, " +"no help file has been written (yet); in that case, use the <i>What's This</" +"i> button on the left." msgstr "" #: qt/standalone.cpp:49 @@ -560,6 +574,10 @@ msgid "" "program." msgstr "" +#: qt/standalone.cpp:55 +msgid "&Apply" +msgstr "" + #: qt/standalone.cpp:56 msgid "This button saves all your changes without exiting." msgstr "" @@ -571,15 +589,3 @@ msgstr "" #: qt/standalone.cpp:62 msgid "This button exits the program without saving your changes." msgstr "" - -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Børre Gaup" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "boerre@skolelinux.no" |