diff options
Diffstat (limited to 'tde-i18n-sl/docs/tdebase/userguide')
24 files changed, 0 insertions, 2092 deletions
diff --git a/tde-i18n-sl/docs/tdebase/userguide/CMakeLists.txt b/tde-i18n-sl/docs/tdebase/userguide/CMakeLists.txt deleted file mode 100644 index 8b8b213b489..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/CMakeLists.txt +++ /dev/null @@ -1,6 +0,0 @@ -# This file is genereted by trinity-automake-cmake-convert script by Fat-Zer - -tde_create_handbook( - DESTINATION khelpcenter/userguide - LANG sl -) diff --git a/tde-i18n-sl/docs/tdebase/userguide/Makefile.am b/tde-i18n-sl/docs/tdebase/userguide/Makefile.am deleted file mode 100644 index 0200a2e6585..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/Makefile.am +++ /dev/null @@ -1,4 +0,0 @@ -KDE_LANG = sl -SUBDIRS = $(AUTODIRS) -KDE_DOCS = khelpcenter/userguide -KDE_MANS = AUTO diff --git a/tde-i18n-sl/docs/tdebase/userguide/about-desktop.docbook b/tde-i18n-sl/docs/tdebase/userguide/about-desktop.docbook deleted file mode 100644 index 9a9b6ec67b0..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/about-desktop.docbook +++ /dev/null @@ -1,458 +0,0 @@ -<chapter id="all-about-your-desktop"> -<title>All About Your Desktop</title> - -<epigraph> -<attribution>Little Red Riding Hood</attribution> -<para>Grandma, what big eyes you have!</para> -</epigraph> - -<epigraph> -<attribution>The Wolf</attribution> -<para>The better to see you!</para> -</epigraph> - -<para>The more you see, the more efficiently you can use your -desktop. &kde; gives you the opportunity to make the desktop look and -work the way you prefer, enabling you to work faster and more -productively. It even gives you the opportunity to be warned if a wolf -is trying to eat you, or (if you happen to be a granny) alert you when -Little Red Riding Hood is on her way to bring you the goodies. Now -that's service. </para> - -<sect1 id="the-autostart-folder"> -<title>The Autostart Folder</title> - -<para>Before I discovered the Autostart folder, my daily startup -routine with &kde; consisted of the following: Start &kde;, start -&kedit;, start &konsole;, start &Netscape;, and start &kscd;. This -took time I could have spent better. Native &kde; programs left open -at the end of a session will save their state and reappear when you -login again, but there are some programs (like &Netscape;) that will -not. You can use the <filename>Autostart</filename> folder for these -programs.</para> - -<para>To launch programs when &kde; is started, do the -following:</para> - -<procedure> -<step> -<para>Open the <filename>Autostart</filename> folder. By default this -folder is at <filename -class="directory">$<envar>HOME</envar>/.trinity/share/autostart</filename></para> -</step> -<step> -<para>Open a &konqueror; window and browse to the program you want to -add. If you don't know how to do this, it was covered in <xref -linkend="the-filemanager-screen"/></para> -</step> -<step> -<para>Drag and drop the desired program from the &konqueror; window -on to the <filename class="directory">autostart</filename> folder. -When asked, choose <guimenuitem>Link</guimenuitem> to create a -symbolic link rather than a full copy, as this saves a great deal of -disk space.</para> -</step> -<step> -<para>Repeat the above steps for every program you want started when -&kde; is launched. Remember, you don't need to add native &kde; -applications, just leave them open when you log out, and they will -open up again as if nothing had happened, the next time you log in to -&kde;.</para> -</step> -<step> -<para>Restart &kde; if you want to see the autostart function in -action.</para> -</step> -</procedure> - -<para>Your programs should have launched automatically when &kde; -restarted. If you want to add something special (e.g., you want to see -a certain web site when your system goes up), read <link -linkend="using-templates">Using templates</link>. The procedures -described there work for any folder, so you can also apply them to -the <filename>Autostart</filename> folder, as well.</para> - -</sect1> - -<sect1 id="adding-programs"> -<title>Adding Programs and Shortcut Icons to Your <guimenu>K</guimenu> menu and Panel</title> - - -<para>The &kde; <guimenu>K</guimenu> menu and &kicker; are not limited -to the setup you find right after installing &kde;. The &kde; panel -is designed to be extended, and there are two main ways of doing that: -Adding new programs, and adding shortcut icons.</para> - -<sect2 id="menu-items-add"> -<title>Adding menu entries</title> - -<para>&kde; comes with a great many applications already in the menu. -Depending on your operating system and distribution, this could -include many non-&kde; applications. &kde; also includes an -application that will search your hard drive for more applications, -and add them to the menu for you. Try pressing <keycombo -action="simul"><keycap>Alt</keycap><keycap>F2</keycap></keycombo> and entering -<userinput>kappfinder</userinput> to see it in action — -operation is very straightforward.</para> - -<para>&kappfinder; is clever enough, but it doesn't know about every -application there is. Or perhaps you simply don't want to have all -those applications in the menu, and just want to add a single extra -program.</para> - -<para>To add your favorite programs to the &kde; menu, you can use -the <application>KDE Menu Editor</application>. To start it, use the -<guimenu>K</guimenu> menu and choose -<menuchoice><guimenuitem>System</guimenuitem><guimenuitem>Menu -Editor</guimenuitem></menuchoice>.</para> - -<para>A window will open showing the existing <guimenu>K</guimenu> menu -on the left, and an empty menu entry dialog on the -right</para> - -<para>For this example, we will be adding an entry for the -<application>Gimp</application> under the -<guisubmenu>Graphics</guisubmenu> submenu. If you already have a -<guimenuitem>Gimp</guimenuitem> entry there and don't want a new one, -you can still follow through this example, but just don't click the -<guibutton>Apply</guibutton> when you are done.</para> - -<procedure> -<step><para>Navigate down the left hand tree to the -<guisubmenu>Graphics</guisubmenu> entry.</para></step> -<step> -<para>Click on it once with the <mousebutton>left</mousebutton> mouse -button to expand the entry.</para> -</step> -<step> -<para>Click the icon labeled <guiicon>New Item</guiicon> in the -toolbar, or choose <menuchoice><guimenu>File</guimenu><guimenuitem>New -Item</guimenuitem></menuchoice> in the menu bar.</para> -</step> -<step> -<para>In the dialog box that pops up, enter the name you want your new -menu entry to have. For this example, enter -<userinput>Gimp</userinput>.</para><para>Then press -<guibutton>OK</guibutton> in the dialog.</para> -</step> -<step> -<para>Click on the new <guimenuitem>Gimp</guimenuitem> menu entry that -was created for you under the <guisubmenu>Graphics</guisubmenu> -submenu. The menu entry dialog to the right will now change to be -mostly empty, except for the name you already gave.</para> -</step> -<step> -<para>Fill in an optional <guilabel>Comment</guilabel>. You might -like to put <userinput>An image editor</userinput> for the example. -Text entered here will be shown as a tool-tip in the -<guimenu>K</guimenu> menu.</para> -</step> -<step> -<para>Enter in the box labeled <guilabel>Command</guilabel>, the -command you would type on the command line to open your application. -For this example, this is <command>gimp</command>. You may also enter -any optional command line parameters if you wish. You can use this to -make a menu entry that always opens a particular document or image, -for example. Check the application's documentation to find out more -about command line parameters.</para> -</step> -<step> -<para>If you want the application to operate from a particular -directory (for example, for <application>Gimp</application> to begin -it's <guilabel>Load Image</guilabel> dialog in a particular place) -enter this path in the box labeled <guilabel>Work Path</guilabel>. -This is optional.</para> -</step> -<step> -<para>If you wish to change the icon from the default -<quote>unknown</quote>, click on the <guiicon>icon</guiicon> to the -right of the dialog, to open a standard &kde; icon chooser.</para> -</step> -<step> -<para>Some applications must be <guilabel>run in a terminal</guilabel> -window (for example <application>Pine</application>). If this is the case, -check the appropriate check box.</para> -</step> -<step> -<para>If you want to run your application as a different user, check -the box labeled <guilabel>Run as a different user</guilabel> and -enter the appropriate user name in the text box.</para> -</step> -<step> -<para>If you're happy with your menu entry, press -<guibutton>Apply</guibutton>. If you would like to start over, press -<guibutton>Reset</guibutton>.</para> -</step> -</procedure> - -<para>And that's all. You now have a new menu entry.</para> - -</sect2> - -<sect2 id="icons-add"> -<title>Shortcut Icons</title> - -<para>Although &kde; is much more comfortable than the average &UNIX; -window manager, everyone wants a solution for a one-click way to start -a program. Later, you will learn how to create links and files on your -desktop, but this also has some disadvantages: sometimes all your -desktops are filled up with windows, and you cannot reach your icons -without minimizing all the windows that cover them. For commonly used -programs, you can minimize this problem and speed access by creating -shortcut icons on the &kde; panel.</para> - -<para>To create a shortcut on the &kicker; panel, you have some -choices: Drag-and-drop, or via a menu. </para> - -<procedure> -<title>Adding a shortcut icon with the menu</title> -<step><para>Click on the <guiicon>K</guiicon> icon and choose <menuchoice><guisubmenu>Panel -Menu</guisubmenu><guisubmenu>Add</guisubmenu><guimenuitem>Application</guimenuitem> -</menuchoice>.</para></step> -<step><para>You will see the top level of the <guimenu>K</guimenu> menu -again. Go through the menus to find the entry for which you -want to create the shortcut, such as <guimenuitem>Home directory</guimenuitem> -or &konqueror;. Click on the program you want.</para> -</step> -</procedure> - -<para>A new icon will appear on the panel. Click on it, and the program will -start.</para> - -<para>Adding a shortcut icon with drag-and-drop is even simpler - just -drag any icon from your desktop, or a &konqueror; window, to an empty -space on the panel.</para> - -<para>What happens when you drag an item to your panel depends on what -kind of item it is:</para> - -<variablelist> -<varlistentry> -<term>If you drag a directory...</term> <listitem><para>A menu will -pop up giving you a choice of <guimenuitem>Add as a File Manager -URL</guimenuitem> or <guimenuitem>Add as a QuickBrowser</guimenuitem>. -Choosing the first will create an icon that opens a &konqueror; -window, starting at this directory, while choosing the latter will -open that directory as a menu from the Panel.</para></listitem> -</varlistentry> - -<varlistentry> -<term>If you drag a shortcut from your desktop...</term> -<listitem><para>It will be copied to the panel.</para></listitem> -</varlistentry> - -<varlistentry> -<term>If you drag a document...</term> -<listitem><para>A link will be made on the panel, leaving the original in -place. Clicking on the resulting icon will open that document in the default -application.</para></listitem> -</varlistentry> -</variablelist> - -<para>In any case, if you want to move the icon, click on it using the -<mousebutton>right</mousebutton> mouse button and choose -<guimenuitem>Move.</guimenuitem> Move the icon to the position you -want and press the <mousebutton>left</mousebutton> mouse button. If -you wish to remove the icon, click on it using the -<mousebutton>right</mousebutton> mouse button and choose -<guimenuitem>Remove</guimenuitem>. You can also move the icon by -clicking with the <mousebutton>middle</mousebutton> mouse button, and -dragging it to it's new location.</para> - -</sect2> -</sect1> - -<sect1 id="creating-new-files-on-your-desktop"> -<title>Creating New Files On Your Desktop</title> - -<para>Your desktop can be an efficient place to work. Every time you -start &kde;, you can see the complete files, folders and &URL;s which -you often use.</para> - -<para>There are two ways to create and edit files on your desktop. In -any application, you can say that you want to save your work in the -Desktop subfolder of your home directory. For example, my home -directory is <filename class="directory">/home/stupiddog</filename>, -so my Desktop directory is <filename -class="directory">/home/stupiddog/Desktop</filename>. Everything you -save there will be put on your desktop.</para> - -<para>If you want to move existing files to your Desktop, the best way -to achieve this is to use &konqueror;. Open a file manager window and -drag the files you need to your desktop. You can choose to copy them -if you want to keep all your common stuff on the desktop now, or you -can create symbolic links to the real files. Everything you change in -the link files will be automatically updated in the originals. For -more information on how to use drag & drop and the file manager, -see the chapter <link linkend="moving-files-with-drag-and-drop">Moving -files with drag & drop.</link></para> - -</sect1> - -<sect1 id="using-templates"> -<title>Placing Links on Your Desktop</title> - -<para>Placing files on your desktop may shorten the paths you need to -enter. However, sometimes it would be nice if you could start &kedit; -with a commonly edited file already opened in it. And how often do you -find yourself frustrated after browsing through endless lists of -bookmarks to find a site you visit often? Wouldn't it be nice if -everything necessary to deliver you to that site was done -automatically after clicking a single icon?</para> - -<sect2 id="using-mimetype"> -<title>Using Templates</title> - -<para>Templates provide a convenient mechanism for performing tasks -such as those outlined above. Templates can also be used to associate -particular file extensions with a specific application. When a file -ending in a known extension is double-clicked, the application -associated with that extension is automatically started. In short, -<emphasis>templates</emphasis> help you get the most out of -&kde;.</para> - -<para>Example: You want to put an icon for visiting the &kde; web site -on your desktop.</para> - -<procedure> -<step><para><mousebutton>Right</mousebutton> click on an empty space in the -desktop.</para></step> -<step><para>Choose <menuchoice><guisubmenu>Create -new</guisubmenu><guimenuitem>Internet Address (URL)</guimenuitem></menuchoice> -from the context menu.</para></step> -<step><para>A dialog box will open where you can type in the address you are -making a shortcut to.</para></step> -<step><para>A new icon will be created on your desktop.</para></step> -</procedure> - -<para>Your new Internet shortcut can be customized like any other -shortcut icon. <mousebutton>Right</mousebutton> click on the icon and -choose <guimenuitem>Properties</guimenuitem>, and you can change the -icon, or the name of the shortcut as you wish.</para> - -</sect2> -<sect2> - -<title>Using &MIME; Types</title> - -<para>&MIME; Types are very powerful. Employing them, you can easily -customize your system such that clicking on a file of a specific type -starts the application with which that file type has been associated. -For example, all <literal role="extension">.mod</literal> files could -be set to start &noatun;, <literal role="extension">.html</literal> -files could open a &konqueror; window showing the file, and a -<filename>core</filename> file can be viewed with the &khexedit; by -simply clicking on the <filename>core</filename> file.</para> - -<warning> -<para>Although &MIME; types are very powerful, they are not without -dangers. Playing around with &MIME; types as the system administrator -(<systemitem class="username">root</systemitem>) can damage a &kde; -system so severely that it cannot be restarted! In this example, you will -create your <emphasis>personal</emphasis> &MIME; style, which is only -relevant for you. It will only affect other users if you copy or move -it to <filename -class="directory">$<envar>TDEDIR</envar>/share/mimelnk</filename>.</para> -</warning> - -<para>To link a certain file type with a particular application:</para> - -<procedure> - -<step><para>Make sure the application you want to start this file type -has an entry in the <guimenu>K</guimenu> menu.</para></step> - -<step><para>In &konqueror; find or make a file with the extension you -wish to link.</para></step> - -<step><para><mousebutton>Right</mousebutton> click on the file, and -choose <guimenuitem>Edit File Type</guimenuitem> from the context -menu, or choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Edit -File Type</guimenuitem></menuchoice> in the &konqueror; menu -bar.</para></step> - -<step><para>Add file masks for the application by clicking the -<guibutton>Add</guibutton> button, and entering the file pattern you -want. Remember that &UNIX; is case sensitive, so you may need to add -variations - <userinput>*.mp3</userinput> may need -<userinput>*.MP3</userinput> added as well, for example. Add as many -masks as you like in this way.</para></step> - -<step><para>Add a description if you like. This is -optional.</para></step> - -<step><para>In the section labeled <guilabel>Application Preference -Order</guilabel>, press the <guibutton>Add</guibutton> button. A -miniature copy of the <guimenu>K</guimenu> menu will -open, where you can choose the application you want files of this type -to be opened with.</para></step> - -<step><para>Sometimes, you may want to use a different application to -open this file type. For example, you might like to use &kate; to -open text files you wish to edit, and &kedit; for text files that you -just want to take a quick peek into. You can add more applications in -the same way as you did in the last step, and you can change the -preferred order using the <guibutton>Move Up</guibutton> and -<guibutton>Move Down</guibutton> buttons.</para></step> - -<step><para>If you're satisfied with your choices, you can click the -<guibutton>Apply</guibutton> button to save your changes without -closing the dialog box. This gives you the opportunity to test in the -&konqueror; window that your file association is correct. You can -choose <guibutton>OK</guibutton> to save your changes and close the -dialog box, or <guibutton>Cancel</guibutton> if you have changed your -mind and just want to close the dialog box.</para></step> -</procedure> - -<para>Be sure to try your new association by opening a directory -containing a file of the type you just selected. Click on the file, -and the program needed to edit it should start.</para> - -<note> -<para> -&MIME; types are a way of describing the contents of files. You may -be used to using file extensions for that purpose, and you may know -that on &UNIX; systems the file extension often bear little or no -relation to the contents of the file. On the other hand, it may be -vital - for example, some implementations of <command>gunzip</command> -won't operate on files that aren't named <literal -role="extension">.gz</literal>. -</para> - -<para> -&MIME; types naturally make use of filename patterns, but not -necessarily the extensions - you can set up any filename pattern you -like. For example, if you always want to open any files relating to a -particular client with &kate;, and you make a habit of naming the -files with the client's name at the beginning so that they naturally -group in the &konqueror; window, then you can set up a filename -pattern that matches -<literal>^<replaceable>clientname</replaceable>*</literal>. Then any -files that have <replaceable>clientname</replaceable> at the beginning -(the <literal>^</literal> character means <quote>starts -with...</quote>) and without any regard to the rest of the filename. -</para> -</note> -</sect2> - -</sect1> - -<sect1 id="using-the-trashcan"> -<title>Using the Trash Can</title> - -<para>Under normal circumstances, deleting a file under &UNIX; is -something which cannot be undone. However, with &kde;, you can choose -<guimenuitem>Move to Trash</guimenuitem> instead of -<guimenuitem>Delete</guimenuitem>. This will move the file into the -<filename class="directory">Trash</filename> Folder, which, by -default, is accessible as an icon on your desktop. In the <filename -class="directory">Trash</filename> Folder, you can always recover -deleted files. Remember to empty the trashcan now and then by clicking -on it using the right mouse button, then choosing <guimenuitem>Empty -trashcan</guimenuitem>, otherwise you might run out of disk space -because the files still need space. Note, however, that once you empty -the <filename>Trash</filename> Folder, the files contained therein are -lost forever.</para> - -</sect1> -</chapter> diff --git a/tde-i18n-sl/docs/tdebase/userguide/first-impressions.docbook b/tde-i18n-sl/docs/tdebase/userguide/first-impressions.docbook deleted file mode 100644 index febd4a0d18f..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/first-impressions.docbook +++ /dev/null @@ -1,64 +0,0 @@ - -<chapter id="first-impressions"> -<title>Prvi vtisi </title> - -<epigraph> -<attribution>Origin unknown</attribution> -<para>You see to sea to see that all you can see is sea</para> -</epigraph> - -<para>Prvi vtisi so najpomembnejši -- to ne velja le za slovito srhljivko Agathe Christie <quote>Mišolovka</quote> -- ampak tudi za &kde;. Kot smo že omenili naj bi bil &kde; karseda intuitiven, za učenje preprost uporabniški vmesnik. Cilj bomo pravzaprav dosegli, ko uporabnike ne bodo več potrebovali tega priročnika zato, da bodo mogli delati s &kde;, zaradi česar bodo avtorji (neplačani in prostovoljni) izgubili svoje delovno mesto piscev dokumentacije. </para> - -<sect1 id="starting-kde"> -<title>Zagon &kde; </title> - -<para>Ko zaženete sistem &UNIX;, se bi morala zgoditi ena od dveh stvari (če seveda sistem deluje pravilno; vse drugo je nedokumentiran tretji primer). Ali ostanete v tekstovnem (konzolnem) načinu in se znajdete pred prijavno vrstico ali pa se pojavi grafično prijavno okno. V prvem primeru se morate prijaviti in vtipkati: </para> - -<screen> -<command>startx</command> -</screen> - -<para>Če je bila namestitev uspešna, se bi moralo namizje &kde; pojaviti po nekaj sekundah. </para> - -<para>Če se je pojavilo grafično prijavno okno, potem je vse, kar bi morali vnesti vaše prijavno ime in geslo. Ob pogoju, da je bila namestitev uspešna, bi se moral &kde; zagnati brez nadaljnega vmešavanja. </para> - -<para>Če tega še niste storili, vam priporočamo spremembo vašega upravljalnika prikaza z <application>xdm</application> na &tdm;, ki vključuje isto funkcionalnost, vendar z naprednimi zmožnostmi namiznega okolja K. </para> - -</sect1> - -<sect1 id="desktop-components"> -<title>Gradniki namizja </title> - -<para>Ko se je vse pojavilo, si vzemite čas za raziskovanje novega okolja. Če ste že kdaj delali z <emphasis>&Windows; 95</emphasis> ali <emphasis>OS/2 Warp 4</emphasis> se vam bo mnogo stvari zdelo znanih. Trije glavni deli namizja &kde; so namizje samo, pult in opravilna vrstica.</para> - - -<sect2 id="kde-logout"> -<title>Pult </title> - -<para>Ko zaženete &kde; prvič je pult na dnu zaslona. Od tukaj boste zaganjali programe in preklapljali med navideznimi zasloni. </para> - -<variablelist> <varlistentry> <term>'Lepljivi' gumb</term> <listitem><para>Gumb <guiicon>K</guiicon> je eden najpomembnejših krajev na namizju &kde;. Od tukaj lahko poganjate vse programe &kde;, ki so nameščeni. Pozneje, ko se naučite uporabljati <link linkend="adding-programs"> TDE Menu Editor</link> lahko tudi tu dodajate tudi druge programe. Da poženete program, morate le klikniti na gumb. Pojavil se bo seznam različnih kategorij in nekaj dodatnih vnosov. Ko boste premaknili miško preko izbire, ki ima na desni majhno puščico, se bo pojavil nov menu. Ko najdete program, ki ga želite pognati, kliknite nanj z <mousebutton>levim</mousebutton> gumbom miške.</para></listitem> </varlistentry> <varlistentry> <term>Gumbi navideznih namizij</term> <listitem><para>Ko prvič poženete &kde; boste opazili štiri gumbe, ki so označeni kot <guilabel>Ena</guilabel>, <guilabel>Dva</guilabel>, <guilabel>Tri</guilabel> in <guilabel>Štiri</guilabel>. Ti predstavljajo vaša štiri <emphasis>namizja</emphasis>. Kliknite na enega izmed njih. Ne skrbite; čeprav so <quote>izginila</quote>, so odprta okna še vedno aktivna (le poglejte v seznam opravil!). Uporaba več namizij naenkrat je ena izmed najmočnejših zmožnosti &kde; in sistema &X-Window;. Namesto postavljanja enega okna preko drugega, kot bi to počeli v &Windows; ali OS/2, lahko rečete <quote>No, na prvem namizju bom pisal uporabniški priročnik KDE, na drugem bom pognal prevajalnik <abbrev>sgml2latex</abbrev> in si ogledal rezultate, medtem ko bom na tretjem namizju prevajal Linuxovo jedro in na četrtem bral e-pošto.</quote> </para></listitem> </varlistentry> <varlistentry> <term>Vrstica ikon</term> <listitem> <para>Nekateri ljudje (vključno z mano) so tako leni, da menijo, da sta dva ali celo trije premiki skozi menuje preveč. Zanje se lahko namestijo dodatni gumbi poleg namiznih gumbov; na primer bližnjice v vaš domač imenik, smetnjak, terminalski emulator (<application>Konsole</application>) in dokumenti, ki jih pogosto uporabljate. Za informacije, kako dodati ikone v opravilno vrstico preberite <link linkend="icons-add">Dodajanje ikon v opravilno vrstico</link>. </para> <para>&kde; privzeto namesti več pogosto uporabljenih gumbov, med drugim povezave do &khelpcenter;, &kwrite; in &kcontrol;.</para></listitem> </varlistentry> <varlistentry> <term>Datum in čas</term> <listitem><para>Na skrajnem desnem koncu pulta &kde; lahko vedno vidite čas in datum.</para></listitem> </varlistentry> <varlistentry> <term>Seznam opravil</term> <listitem> <para>V drugem odseku pulta poiščite gumb za vsako odprto okno. Kliknite na gumb, ki ustreza oknu, ki ga želite odpreti. Nadaljen klik bo pomanjšal okno. Klik na <mousebutton>desni</mousebutton> gumb miške bo odprl menu, ki omogoča premik okna na drugo namizje, spreminjanje njegove velikosti ali zapiranje programa.</para></listitem> </varlistentry> </variablelist> - -</sect2> -<sect2> -<title>Uporaba oken </title> - -<variablelist> <varlistentry> <term>Menu okna</term> <listitem> <para>Klik z <mousebutton>desnim</mousebutton> gumbom miške na naslovni letvi okna (kjer vidite ime programa) lahko vidite menu za upravljanje z okni. To je enak menu, kot ga vidite, če kliknete z <mousebutton>desnim</mousebutton> gumbom miške na ikono programa v opravilni vrstici pulta. Ko kliknete nanjo, se pojavi kontekstni menu, ki vsebuje ukaze za manipulacijo z okni. Na voljo so naslednji ukazi:</para> <variablelist> <varlistentry> <term><guimenuitem>Premaknimo</guimenuitem></term> <listitem><para>Omogoča premikanje okna z miško. Kliknite z <mousebutton>levi</mousebutton> gumbom miške, ko je okno tam, kjer želite, da naj bo.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Velikost</guimenuitem></term> <listitem><para>omogoča povečevanje ali pomanjševanje okna. Premikajte miško naokoli in kliknite, ko ste zadovoljni z novo velikostjo.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Pomanjšajmo</guimenuitem></term> <listitem><para>Skrije okno in pusti le ikono v opravilni vrstici. Opazili boste, da je naslov okna prikazan v (oklepajih). Da prikličete okno nazaj na namizje, kliknite na naslov okna.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Razpnimo</guimenuitem></term> <listitem><para>To bo razširilo okno na največjo možno velikost. Upoštevajte, da bo &kde; uporabil velikost vašega <emphasis>navideznega namizja</emphasis>, kar pomeni, da je lahko okno večje kot vaš zaslon. </para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Osenčimo</guimenuitem></term> <listitem><para><quote>Zvij</quote> okno, tako da bo ostala vidna le naslovna letev. Enak učinek lahko dosežete z dvojnim klikom na naslovni vrstici. Da se znova prikaže celotno okno izberite <guimenuitem>Osenči</guimenuitem> ali pa dvojno kliknite na naslovno letev.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Vedno na vrh</guimenuitem></term> <listitem><para>Ta izbira bo ohranila okno pred vsemi programi na namizju, tudi če nima fokusa.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Shrani nastavitve</guimenuitem></term> <listitem><para>Shrani trenutne nastavitve za to okno (položaj, velikost, ali naj vedno ostane na vrhu &itd;). Ta nastavitev bo naložena ob naslednjem odprtju okna.</para> </listitem> </varlistentry> <varlistentry> <term><guimenuitem>Okraski</guimenuitem></term> <listitem><para>Omogoča vam spreminjanje izgleda in v nekaterih primerih pozicijo vseh oken v &kde;. To spremeni gradnike okenskih okraskov, vključno z naslovnimi letvami in tudi potrditvenimi polji in gumbi ter pogovornimi okni, drsniki in naslovno letvijo samo. Privzeto je &kde; 2.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Na namizje</guimenuitem></term> <listitem><para>Omogoča vam, da pošljete okno na drugo namizje. Izberite namizje, na katerem želite, da je okno. Okno bo takoj izginilo. Da ga znova vidite, izberite ustrezni <guiicon>namizni gumb</guiicon> na <application>pultu</application>. Če izberete <guimenuitem>Vsa namizja</guimenuitem> bo okno postalo <quote>lepljivo</quote> - izrisano bo na vseh namizjih, tako da ga lahko vedno vidite.</para></listitem> </varlistentry> <varlistentry> <term><guimenuitem>Zapri</guimenuitem></term> <listitem><para>To bo zaprlo okno. Včasih vam bo program dovolil shraniti vaše delo, v nekaterih primerih (<abbrev>npr.</abbrev>, pri starih X11 programih) pa to ne dela. Najbolje je zapirati programe z njihovimi lastnimi ukazi, z uporabo tega menuja le kot zadnje možnosti.</para></listitem> </varlistentry> </variablelist> </listitem> </varlistentry> <varlistentry> <term>'Lepljivi' gumb</term> <listitem><para>Ta gumb je videti kot tuba lepila. Izvede isto operacijo kot izbira <guimenuitem>Vsa namizja</guimenuitem> v <guimenu>okenskem menuju</guimenu>, zahteva pa manj korakov.</para></listitem> </varlistentry> <varlistentry> <term>Naslovna letev</term> <listitem><para>Naslovno letev, ki vsebuje ime okna, lahko z dvojnim klikom zvijete. Uporabite <mousebutton>desni</mousebutton> gumb miške: <guimenu>okenski menu</guimenu> se bo ponovno pojavil in vam omogočil povečanje, pomanjšanje, premikanje, spreminjanje velikosti, odlepljenje okna, premik na drugo namizje (dela hitreje kot metoda z lepljivim gumbom). Ko se program ne odziva, ga lahko zaprete (kar vam bo včasih ponudilo možnost, da shranite vaše delo). </para></listitem> </varlistentry> <varlistentry> <term>Gumbi <guibutton>pomanjšaj</guibutton>, <guibutton>razpni</guibutton> in <guibutton>zapri</guibutton></term> <listitem><para>Na skrajni desni strani naslovne letve sta dva gumba, ki se lahko uporabljata za ikoniziranje in razpenjanje okna (to je hitreje kot uporaba menujev za manipulacijo ikon). Pomanjšana (ikonizirana) okna se lahko povrnejo s klikom na opravilni vrstici. </para> <para>Na skrajni levi strani naslovne vrstice (pri privzetih okraskih oken) je gumb za zapiranje okna.</para></listitem> </varlistentry> </variablelist> - -<para>Da premaknete okno postavite kurzor na naslovno letev in držite <mousebutton>levi</mousebutton> gumb miške. Ne da bi ga spustili premaknite okno tja, kamor želite, nato pa spustite gumb miške. Če želite spremeniti velikost okna premaknite kurzor nad rob okna, ki ga želite spremeniti. Ko ste dosegli pravo mesto se bo kurzor spremenil iz puščice v črtico in puščico. Pritisnite <mousebutton>levi</mousebutton> gumb miške in povlecite stran, ki jo spreminjate na lokacijo, ki jo želite ter spustite gumb. Upoštevajte da lahko vlečete stranice ali pa kote (kar bo spremenilo velikost v dveh dimenzijah hkrati).</para> - -<para>Uporaba menujske vrstice vsakega okna &kde; je preprosta. Kliknite na to, kar želite narediti in opravljeno bo.</para> - -<para>Pod menujsko vrstico je nabor simbolov za orodja, ki jih lahko uporabite za izvajanje ukazov. Kadarkoli se premaknete nadnje, bo aktivna slika označena. Vendar pa lahko menu za vas naredi še več. Ste opazili teksturiran pas na levi strani menujske in ikonske vrstice? Kliknite z <mousebutton>desnim</mousebutton> gumbom miške in pojavil se bo kontekstni menu, ki vam bo omogočil, da menu postavite <guimenuitem>Na vrhu</guimenuitem> <guimenuitem>Levo</guimenuitem>, <guimenuitem>Desno</guimenuitem>, ali <guimenuitem>Na dnu</guimenuitem> okna. Lahko ga tudi skrijete z izbiro <guimenuitem>Plosk</guimenuitem>.</para> - -</sect2> - -<sect2> -<title>Priklic pomoči </title> - -<para>Pomoč je dosegljiva skoraj povsod: na namizju uporabite <mousebutton>desni</mousebutton> gumb miške in izberite <guimenuitem>Pomoč za namizje</guimenuitem>. Na pultu odprite menu zaganjalca programov in izberite <guimenu>Pomoč</guimenu>. Vsak &kde; program ima menu pomoči. Vsa pomoč je osnovana na <acronym>HTML</acronym>, tako da je uporaba sistema pomoči enako preprosta kot uporaba vašega najljubšega spletnega brskalnika! </para> - -</sect2> -</sect1> -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/getting-started.docbook b/tde-i18n-sl/docs/tdebase/userguide/getting-started.docbook deleted file mode 100644 index 84306dac8d0..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/getting-started.docbook +++ /dev/null @@ -1,459 +0,0 @@ -<chapter id="getting-started"> -<title>Getting Started </title> - -<epigraph> -<attribution>Help for one of the toughest riddles in <quote>The 7th -Guest</quote></attribution> -<para>Using only what you see, can you get from A to B?</para> -</epigraph> - -<para>So far, you may be thinking that &kde; is little more than -another window manager. Relax, and read this chapter, and we'll -introduce you to some features that will assure you that &kde; is very -much more than a window manager — it's a full fledged -environment.</para> - -<sect1 id="editing-files"> -<title>Editing Files </title> - -<para>Since you do not only have &kde; applications installed on your -system, you probably know the mess of editing <abbrev>ASCII</abbrev> -style configuration files. But in fact, there are a lot of other file -types that need to be edited this way. For example, the raw &XML; -source for this guide was written <abbrev>ASCII</abbrev> style, as was -the source code for the &kde; programs themselves. We will now show -you how you can use the &kwrite; facility in &kde; to edit -<abbrev>ASCII</abbrev> files of your own. </para> - -<sect2 id="the-filemanager-screen"> -<title>Opening a Window Containing Your Home Directory </title> - -<para>Click on the <guiicon>K</guiicon> icon button and -choose <guimenuitem>Home Directory</guimenuitem>. A window showing -the contents of your home directory will pop up. To see a more -detailed listing of files in your home directory, select -<guimenuitem>Show Hidden Files</guimenuitem> from the -<guimenu>View</guimenu> menu.</para> - -<para>On the left hand of the window, a tree view of your file system -structure should appear, while on the right hand side, you can see -icons for each file in your Home directory, including any -<quote>hidden files</quote> — files or directories beginning with a -period. </para> - -</sect2> - -<sect2> -<title>The File Manager Screen </title> - -<para>We tried to make the File Manager as easy as possible to use, -and if you know other window managers (including those built into -other Operating Systems) with integrated file management, many of the -following concepts should be familiar to you.</para> - -<para>On the top, there is a <guimenu>Location</guimenu> menu which -contains functions to open and close file manager windows. You can -also print the current contents.</para> - -<note><para>Want to visit the Internet? There are several paths you -can take. You could choose -<menuchoice><guimenu>Location</guimenu><guimenuitem>Open -Location</guimenuitem></menuchoice> (or press -<keycombo><keycap>Ctrl</keycap><keycap>O</keycap></keycombo>) and enter a -&URL;.</para> - -<para>The simplest way however, is to simply type in the address you -want to go to in the location bar itself.</para> - -<para>For example, if you want to visit the &kde; homepage, enter -<userinput>http://www.kde.org</userinput>. You can also quickly -transfer files over &FTP; using this method. &kde; is <quote>Internet -ready</quote>, which means that you can load and save files not only -on your local hard disk, but also on remote &FTP; and other remote -servers that you have write access to. While other operating systems -and desktops make a distinction between local and remote file systems, -&kde; does not.</para> -</note> - -<para>The <guimenu>Edit</guimenu> menu offers functions to select, -copy and move files. We will use them later. Already having used the -<guimenu>View</guimenu> menu, you have probably seen that you can view -the content in many different ways. Just play around a bit and see -what happens.</para> - -<para>You will undoubtedly find the <guimenu>Bookmarks</guimenu> to be -extremely useful: Now you can remember virtually any link, be it on -the local machine or somewhere on the Internet. &kde;'s network -transparency works both ways, allowing you to treat files and -directories on your hard drive as if they were Internet -bookmarks.</para> - -<para>The <guimenu>Tools</guimenu> menu helps you find the notorious -file-that-I-put-somewhere-I-do-not-remember-anymore.</para> - -</sect2> - -<sect2> -<title>Navigating Through Directories </title> - -<para>We will now pick one of your configuration files and edit -it. First, we must change the directory in the File Manager.</para> - -<para>&konqueror; started with your home directory as the top of the -<quote>tree</quote>. For most day-to-day purposes, this is where you -are likely to be working, so it's a practical default. Sometimes you -need to see the broader picture though, so the rest of your file -system is not far away.</para> - -<para>You can quickly display the <filename -class="directory">/</filename> or <quote>root</quote> directory -several ways: click the small <guiicon>folder</guiicon> icon beside -the navigation pane to switch to a full filesystem tree, use the -<guiicon>Up</guiicon> arrow on the toolbar above to go to the top of -your filesystem in the right hand pane, or type in -<userinput>/</userinput> in the location bar.</para> - -<para>For the purpose of following this guide, press the small blue -folder icon beside the navigation pane, so that the navigation pane -switches to a full filesystem view. Notice that part of the tree is -expanded, and your home directory is still selected. Now you can see -how your home directory fits into the whole hierarchy, and your home -directory files are still visible in the right hand pane.</para> - -<para>Scroll down the navigation pane on the left side of the window -until you find the directory <filename>/etc</filename>. Double-click -on <filename>etc</filename>. You will see a long list of files in the -right window.</para> - -</sect2> - -<sect2 id="opening-a-file"> -<title>Opening A File </title> - -<para>Some of the files you see here are at the heart of your -operating system, so making permanent changes to them require you to be -the <systemitem class="username">root</systemitem> or superuser. -We're going to practise on a file that won't hurt anything if a -mistake is made, called <filename>motd</filename>.</para> - -<para>Scroll down until you find the file <filename>motd</filename> -and click on it with the <mousebutton>right</mousebutton> mouse -button. In the <guimenu>context menu</guimenu>, select -<guimenuitem>Open With</guimenuitem>. A new menu will pop up. Choose -<guimenuitem>&kwrite;</guimenuitem>. Voila!</para> - -<para>There are many ways to open a file, and this is just one of -them. &kwrite; is an editor with a simple and probably familiar -interface. You could also have navigated down the small tree in the -popup dialog to the <guilabel>Editors</guilabel> section, and chosen -another editor, or simply double click the file to open it in the -default editor.</para> - -<para>In the meantime, you have the file -<filename>/etc/motd</filename> open in &kwrite; and we're ready to do -some editing.</para> - -</sect2> - -<sect2> -<title>The Editor Screen </title> - -<para>The more you work with &kde;, the more you will notice that most -screens and applications look and feel the same. The &kwrite; -<guimenu>File</guimenu> menu is a great example of this. Almost every -other &kde; program has the same menu, allowing you to create new -files, open existing files from your local file system or (coming -soon) even the web, save them (soon even on the web, too!), print it -or mail it to somebody else.</para> - -<para>The <guimenu>Edit</guimenu> menu can also be found in most &kde; -applications, allowing you to cut and paste information between -programs. You can also search and replace text. Using the -<guimenu>Settings</guimenu> Menu, you can customize the editor in many -different ways. For example, you can increase the font size to suit -your monitor resolution — and your eyes. Of course, as in any -other &kde; application, you find a <guimenu>Help</guimenu> Menu, -offering you on-line help whenever you need it. </para> - -</sect2> - -<sect2> -<title>Using the Editor </title> - -<para>Most <filename>motd</filename> files contain useless stuff like -<quote>Do not forget to back up your data</quote> or <quote>Do not -annoy the system manager</quote>. Boring. Let's change the text so -that users logging in get the really important information. You can -navigate through the text using the arrow keys, and mark sections of -text with <keycombo><keycap>Shift</keycap><keycap>Arrows</keycap> </keycombo>or by -using the mouse with the <mousebutton>left</mousebutton> button -pressed. Use the <guimenu>Edit</guimenu> Menu to cut and paste -text. Enter whatever you want, or use the following (great) example: -</para> - -<screen><userinput>Welcome! - -This machine now has KDE installed, providing you with a great, -easy-to-use interface and a consistent Look-and-Feel for all your -applications. For more information on how to get KDE running on your -account, please email the administrator. </userinput></screen> - -</sect2> - -<sect2 id="saving-files"> -<title>Saving Your Work </title> - -<para>Now that you have changed the <filename>motd</filename> file, it -is time to save the file, putting the changes into effect. To do this, -you can use either the <guimenu>File</guimenu> Menu, or you can use -the <guiicon>Save</guiicon> Icon on the toolbar.</para> - -<para>At this point, reality hits us. You need to have <systemitem -class="username">root</systemitem> permission to save the changes to -this file. &kde; handles this by asking you for the <systemitem -class="username">root</systemitem> password.</para> - -<para>You probably don't really want to save this file, so you can -press <guibutton>Cancel</guibutton> in the password dialog and -<guibutton>Cancel</guibutton> again in the save dialog.</para> - -<para>Finally, finish your work by closing the editor and file manager -window. You can do this by clicking the <guibutton>X</guibutton> -button on the top left of the window, by using the window menu of the -title bar, or by choosing <menuchoice><guimenu>File</guimenu> -<guimenuitem>Quit</guimenuitem></menuchoice>. Simple and elegant, -isn't it? -</para> - -</sect2> - -<sect2 id="creating-new-files"> -<title>Creating New Files</title> - -<para>As with everything in &kde;, there are several ways to create a -new file. You could open up the file manager, -<mousebutton>right</mousebutton> click on an empty space in a -directory you own, and choose <menuchoice><guisubmenu>Create -New</guisubmenu><guimenuitem>Text File...</guimenuitem></menuchoice>. -A new empty file will appear, which you can open just like any other. -You can even do this right on the desktop itself.</para> - -<para>More often you are already in an application and want to start a -new file. Most &kde; applications offer a -<menuchoice><guimenu>File</guimenu><guimenuitem>New</guimenuitem></menuchoice> -menu item, and an icon on the toolbar to complement it. A new empty -document will appear that you can immediately begin working in.</para> - -<para>Both these approaches have advantages, so use the one that is -most practical at the time.</para> - -</sect2> - -</sect1> - -<sect1 id="moving-files-with-drag-and-drop"> -<title>Moving Files With Drag and Drop </title> - -<para>As you have seen in the previous section, working with files is -as easy as 1-2-3. However, when you want to copy and move files, the -whole copy-and-paste business can get annoying. Don't worry — a -procedure called <quote>drag and drop</quote> allows you to copy and -move files more quickly and easily. </para> - -<sect2> -<title>Opening Two File Manager Windows </title> - -<para>Before you can start, you will need to open two file manager -windows. The simplest way to open a new window is to press the gear -wheel button on the right of the icon bar. If you do not see the tree -view in the new window, activate it -(<menuchoice><guimenu>Window</guimenu><guimenuitem>Navigation -Panel</guimenuitem> </menuchoice>).</para> - -</sect2> - -<sect2> -<title>Dragging a File From One Window To Another </title> - -<para>In the first window, open the <filename>/etc</filename> folder -and scroll until you see the <filename>motd</filename> file we -modified in the previous section.</para> - -<para>In the second window, open your home directory.</para> - -<para>Click on the <filename>motd</filename> file. Hold your -<mousebutton>left</mousebutton> mouse button and drag your file into -your home directory. Release the <mousebutton>left</mousebutton> mouse -button (this is called <emphasis>dropping</emphasis> the file). You -will be presented three options: <guimenuitem>copy</guimenuitem>, -<guimenuitem>move</guimenuitem> and -<guimenuitem>link</guimenuitem>. <guimenuitem>Link</guimenuitem> will -create a symbolic link to the file, while -<guimenuitem>copy</guimenuitem> and <guimenuitem>move</guimenuitem> do -exactly what they say. Select <guimenuitem>copy</guimenuitem>. You -should now have a copy of the <filename>motd</filename> file in your -home directory. </para> - -</sect2> -</sect1> - -<sect1 id="using-command-line-and-terminals"> -<title>Using Command Line And Terminals </title> - -<para>So far, you have only worked with the tools and programs &kde; -provides. Undoubtedly, you will want to use other &UNIX; programs as -well. There are two ways of running them: The quick command line and -the terminal.</para> - -<sect2> -<title>Quick Command Line </title> - -<para>Pressing <keycombo action="simul"><keycap>Alt</keycap> -<keycap>F2</keycap></keycombo> pops up a small window where you can -enter a command to run. Please note that you will not see any text -output generated from a program started in this manner! This method is -only recommended for starting &X-Window; based programs or for running -tools where you do not need to see or type anything. For other -programs, you will still need to use the terminal.</para> - -</sect2> - -<sect2> -<title>The &UNIX; Terminal Emulator </title> - -<para>From the application menu, choose -<menuchoice><guisubmenu>System</guisubmenu><guimenuitem>Terminal</guimenuitem> -</menuchoice>. A terminal window will open. Here you can use regular -&UNIX; shell commands: <command>ls</command>, <command>cat</command>, -<command>less</command>, and so forth. Using the -<guimenu>Options</guimenu> menu, you can customize the terminal -emulator to suit your needs. </para> - -</sect2> -</sect1> - -<sect1 id="finding-your-lost-files"> -<title>Finding Your Lost Files </title> - -<para>Everyone has undoubtedly encountered the following problem: You -start <command>ftp</command>, log into a great site like ftp.kde.org -and start downloading files. It is late in the evening and you shut -down your machine after completing the transfer. The next morning, you -are at the keyboard again, and you start wondering into which -directory you placed the recently transferred files. Using &kde;'s -&kfind; utility makes finding those lost files a snap.</para> - -<sect2> -<title>Starting &kfind;</title> - -<para>Starting &kfind; is simple: Choose <guimenuitem>Find -Files</guimenuitem> in the <guimenu>K</guimenu> menu. &kfind; uses an interface -part you probably have not yet met in &kde;: -tabs. When &kfind; starts, you see that -<guilabel>Name/Location</guilabel> is selected. When you click on -<guilabel>Date Range</guilabel>, the tab content changes. Since you -have never run a search before, most of the icons on the toolbar and -most of the menu entries are disabled. We will change this now.</para> - -</sect2> - -<sect2> -<title>Finding a File by Knowing Parts of Its Name </title> - -<para>As long as you know a bit of the file name, searching is -easy. Select the <guilabel>Name/Location</guilabel> tab, and enter the -file name in the <guilabel>Named</guilabel> field. Wildcards may be -used as needed. As a test, type <userinput>*.tar.gz</userinput>. By -default, the search begins in your home directory, but you can select -any starting directory you wish by clicking on the <guilabel>Look -in</guilabel> or <guibutton>Browse...</guibutton>. To start searching, -press the <guibutton>Find</guibutton> button. After a moment, a list -of files will appear in the search results window. If they do not -appear, you started the search in the wrong directory, made a spelling -mistake in the <guilabel>Named</guilabel> field, or no files ending -with a <filename>.tar.gz</filename> extension are located on your -machine.</para> - -</sect2> - -<sect2 id="finding-with-complex-criteria"> -<title>Finding a File by More Complex Criteria </title> - -<para>There are many categories you can use to make your search more -precise. <emphasis>The more you know about the file, the better are -your chances of finding it</emphasis>.</para> - -<variablelist> -<varlistentry> -<term><guilabel>Date Range</guilabel></term> -<listitem> -<para>Here, you can specify that you only want to see files which were -last touched in a given period of time. You can also specify that you -only want to see files that were touched since a specified number of -months or days ago.</para> -</listitem> -</varlistentry> -<varlistentry> -<term><guilabel>Of type</guilabel> in the -<guilabel>Advanced</guilabel> tab.</term> -<listitem><para>If you know that the file was of a special type -(e.g., a tar/gzip archive or a jpeg picture), you can tell -&kfind; to find only this type of file.</para></listitem> -</varlistentry> -<varlistentry> -<term><guilabel>Containing text</guilabel> in the -<guilabel>Advanced</guilabel> tab</term> -<listitem> -<para>You can specify text that the file must contain. </para> -</listitem> -</varlistentry> -<varlistentry> -<term><guilabel>Size is</guilabel>, also in the -<guilabel>Advanced</guilabel> tab</term> -<listitem><para>If you know the file size, you can limit your search in this -regard, as well. </para></listitem> -</varlistentry> -</variablelist> - -<para>&kfind; has many more options to refine searches, explore them -all!</para> - -</sect2> -</sect1> - -<sect1 id="using-multiple-desktops"> -<title>Using Multiple Desktops </title> - -<para>Using multiple desktops helps you organize your work. You can -place your programs on different desktops, and name the desktops so -you know what you do there. This increases and optimizes your -workspace. It also helps you when you are surfing the net instead of -doing your work and your boss comes in. But, of course, this is rare -— at least in the office where I work. </para> - -<para>You can switch between desktops by clicking the desktop buttons -on the &kicker; panel. If you want to rename them, you can do so by -double-clicking on them. </para> - -<para>You can use windows on multiple desktops. If you want to have a -window present everywhere, just click the sticky button on the -top-left of the window. To send a window to another desktop, click on -the title bar with the <mousebutton>right</mousebutton> mouse button, -choose <guimenuitem>To Desktop</guimenuitem>, and select the desktop -where you would like the window moved. </para> - -</sect1> - -<sect1 id="quitting-kde"> -<title>Quitting &kde;</title> - -<para>To quit working with &kde;, you can use the -<guimenuitem>Logout</guimenuitem> entry in the <guimenu>K</guimenu> menu. You will be -asked if you really want to quit -&kde;. Quitting will close all windows and return you to your console -or display manager. For information on how programs can save your work -during logout, please read <link linkend="kde-logout">the notes for -logging out.</link> </para> - -</sect1> -</chapter> diff --git a/tde-i18n-sl/docs/tdebase/userguide/history.docbook b/tde-i18n-sl/docs/tdebase/userguide/history.docbook deleted file mode 100644 index 71ec94f6a0e..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/history.docbook +++ /dev/null @@ -1,78 +0,0 @@ -<chapter id="history"> -<title>Kratek voden sprehod skozi zgodovino &kde;</title> - -<epigraph> -<attribution>The <abbrev>CEO</abbrev> of a big software company, at -the beginning of the 80s...(apocryphal)</attribution> -<para>640kB bi moralo zadostovati vsakomur </para> -</epigraph> - -<sect1 id="before-kde"> -<title>Pred &kde;</title> - -<para>Od začetka razvoja &UNIX;-a je bila vedno prisotna težava: obstajala so stabilna jedra in dobra, močna programska oprema. Na žalost je lahko &UNIX; uporabljalo le malo ljudi, saj je bil napisan za tiste študente in profesionalce, ki so ga dovolj dolgo študirali. Običajen način prebiranja USENET-a je bil na primer:</para> - -<screen><userinput><command>find</command> <filename>/var/spool/news</filename> <parameter>-name '[0-9]*' -exec cat {} \;</parameter> | <command>more</command></userinput> -</screen> - -<para>Ta problem je bil rešen. Danes je na voljo precej dobrih vmesnikov, kot sta <application>tin</application> in <application>KNode</application>, ki ponujajo preprostost uporabe, intuitiven grafični uporabniški vmesnik (&GUI;). Na žalost pa &GUI;-jem manjka standarden ,,občutek in izgled''. Komercialne programske knjižnice kot je &Motif; so obljubljale rešitev, vendar pa ostale vse do nedavnega predrage in prepočasne. </para> - -<para>Nastavitev programov je pogosto težka. Medtem, ko je prevajanje običajno opravljeno z <userinput><command>./configure</command> && <command>make</command> && <command>make <option>install</option></command></userinput> se da le zelo malo programov prilagoditi s pomočjo menujev ali skript. V večini primerov morate sami urejevati tekstovno nastavitveno datoteko. Pogosto se zgodi, da narobe postavljena vejica podre celotno datoteko in vas s tem prisili, da ponovno pričnete namestitveni proces. Kadarkoli želite znova spremeniti vaše nastavitve ali prilagoditi program, se vsa zmeda ponovno pojavi.</para> - -<para>Vse to prispeva k dejstvu, da &Linux; in drugi &UNIX;-i težko dosežejo širše občinstvo. Hkrati pa mnogo ljudi ni zadovoljnih s svojimi trenutnimi operacijskimi sistemi, večinoma zaradi pomanjkanja stabilnosti in zmogljivosti teh sistemov. Drugi ljudje sovražijo dejstvo, da morajo vsakič, ko izide program, brez katerega ne morejo živeti, kupiti nov računalnik, ker program rabi več <acronym>RAM</acronym>-a in prostora na disku. Pogosto nova različica ponuja funkcije, ki jih zares rabi le malo ljudi. </para> - -<para><emphasis>&kde; je drugačen.</emphasis> Čeprav ne želimo nadomestiti običajne &UNIX; lupine, delamo na orodju, ki bo olajšalo uporabo &UNIX;-a. Prav tako želimo privabiti več uporabnikov. Preproste stvari bodo postale lahke in zapletene izvedljive. Prav tako bo ponujen enoten vmesnik namesto ducata trenutno zahtevanih. </para> - -</sect1> - - -<sect1 id="what-kde-can-do-for-you"> -<title>Kaj lahko &kde; stori za vas</title> - -<para>&kde; je zasnovan za vsakogar.</para> - -<para>Novincem v &UNIX;-u ali pa tistim, ki jih ne zanima učenje novih tehnologij in ukazov, ki jih ni najti v njihovih prejšnjih operacijskih sistemih, se ni treba soočati z posebnostmi ukazne vrstice, razen če tega ne želijo. Vendar pa je mnogo stvari, ki jih &kde; ponuja koristnih tudi za izkušene uporabnike &UNIX;-a, saj lahko z &GUI; orodji poenostavi prej zapletena opravila, ukazna vrstica je vedno oddaljena le ne klik.</para> - -<para>Ne glede, na to, kakšne so vaše izkušnje z &UNIX;-om ali drugimi operacijskimi sistemi, vam &kde; ponuja:</para> - -<itemizedlist> <listitem> <para>Lepo in za uporabo preprosto okensko okolje.</para> </listitem> <listitem> <para>Močan, za uporabo preprost upravljalnik datotek</para> </listitem> <listitem> <para>Močan, za uporabo preprost spletni brskalnik</para> </listitem> <listitem> <para>Preprosto, centralizirano nastavitev</para> </listitem> <listitem> <para>Dolg seznam programov, tako da lahko pričnete učinkovito delo že nekaj minut po vaši prvi prijavi v &kde;.</para> </listitem> <listitem> <para>Sprotno pomoč, ki vas bo podprla v vsaki situaciji.</para> </listitem> <listitem> <para>Skladen uporabniški vmesnik. Menuji so vedno na istih mestih v vseh programih, tipkovne vezi se obnašajo enako, ikone orodne vrstice se, ko se jih enkrat priučite, obnašajo vedno enako.</para> </listitem> </itemizedlist> - -</sect1> - -<sect1 id="background-of-kde"> -<title>Ozadje &kde;</title> - -<para>Oktobra 1996 je nemški razvijalec <application>LyX</application>-a Matthias Ettrich sprožil razvoj &kde; s sporočilom v USENET-u. Kmalu potem je nekaj zainteresiranih razvijalcev začelo načrtovati in programirati dele novega projekta. Leto dni pozneje so bili okenski in datotečni upravljalnik, terminalski emulator, sistem pomoči in prikrojitveno (nastavitveno) orodje izdani v alfa in beta beta testiranje in se izkazali za relativno stabilne. </para> - -<para>Julija 1998 je bil &kde; 1.0 objavljen. To je bila stabilna različica za naslednjih šest mesecev, medtem ko so razvijalci nadaljevali delo na izboljšavi &kde; brez zahtev po stabilnosti. Januarja 1999 so bili njihovi napori usklajeni in združeni v &kde; 1.1, novi standardni, stabilni različici. </para> - -<para>Razvoj se je nadaljeval s &kde; 2.0, skoraj povsem na novo spisano različico namizja, ki je bilo objavljeno 23. oktobra 2000. Rzaličice &kde; 2.x so se razvijale skozi šest manjših izdaj v obdobju enega leta, pri čemer je vsaka prinesla že tako impresivnemu namizju dodatne zmožnosti in stabilnost.</para> - -<para>V času pisanja se &kde; 3.0 pripravlja za izdajo in bo prinesel precej izboljšav v primerjavi z serijo 2.0. Čeprav sprememba &GUI; ni tako dramatična, kot je bil pri prehodu s &kde; 1 na &kde; 2, je mnogo izboljšav, kot je na primer nov tiskalniški sistem, precej izboljšana podproa <acronym>SSL</acronym> (za varne internetne transakcije) ali polna podpora za jezike, ki pišejo od desne proti levi (kot sta arabščina ali hebrejščina), našlo svojo pot na namizje. Več podatkov o tem vznemirljivem razvoju lahko najdete na &kde-http;. </para> - -<para>Razvijalci in zainteresirani uporabniki komunicirajo preko večih poštnih list, kot je opisano v razdelku <link linkend="mailing-lists">Poštni seznami</link>. Če želite pomagati &kde;, to prosim storite. &kde; poganjajo prostovoljni prispevki in vedno ste dobrodošli, da se pridružite.</para> - -</sect1> - -<sect1 id="legal-status"> -<title>Pravne opombe</title> - -<para>&kde; je programska oprema z odprto kodo in celoten &kde; je objavljen pod prostimi licencami, kot je na primer GPL.</para> - -</sect1> - -<sect1 id="getting-kde"> -<title>Kako dobiti nove komponente</title> - -<para>Glavna spletna stran za &kde; je &kde-http;. Tu lahko najdete vse pomembne podatke v zvezi s &kde;, vključno z objavami, popravki hroščev, podatki za razvijalce in mnogo več.</para> - -<para>Za nadgradnje programske opreme obiščite naše &FTP; streni, &kde-ftp; ali pa uporabite zrcalni strežnik v bližini. Svež seznam najdete na <ulink url="http://www.kde.org/ftpmirrors.html">http://www.kde.org/ftpmirors.html</ulink>.</para> - -<para>Imenik <filename>unstable</filename> na &FTP; strežniku vedno vsebuje najnovejšo programsko opremo, vendar pa je pogosto nepreizkušena in se morda sploh ne da prevesti. Če iščete bolj zanesljive komponente, si prosim oglejte imenik <filename>stable</filename>, kamor damo beta različice in uradne izdaje. </para> - -<para>Če se zanimate za razvoj programov za &kde;, potem bi morali obiskati <ulink url="http://developer.kde.org/">http://developer.kde.org/"</ulink>, kjer boste našli zelo veliko podatkov, vključno z lekcijami, vodiči <acronym>API</acronym> za &kde;-jeve knjižnice in še veliko več. Prav tako bi morali obiskati Troll Techov strežnik (<ulink url="http://www.troll.no/">http://www.troll.no</ulink>) ki vsebuje veliko podatkov, ki se nanašajo na knjižnico &Qt;, ki jo uporablja &kde;. Prav tako je v tem primeru priporočljivo, da se pridružite <link linkend="mailing-lists">razvijalski poštni listi.</link></para> - -</sect1> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/index.docbook b/tde-i18n-sl/docs/tdebase/userguide/index.docbook deleted file mode 100644 index deefb75fdac..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/index.docbook +++ /dev/null @@ -1,86 +0,0 @@ -<?xml version="1.0" ?> -<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" -"dtd/kdex.dtd" [ - <!ENTITY kappname "&kde; User's Guide"> - <!ENTITY introduction SYSTEM "intro.docbook"> - <!ENTITY history SYSTEM "history.docbook"> - <!ENTITY installation SYSTEM "installation.docbook"> - <!ENTITY first-impressions SYSTEM "first-impressions.docbook"> - <!ENTITY getstarted SYSTEM "getting-started.docbook"> - <!ENTITY about-desktop SYSTEM "about-desktop.docbook"> - <!ENTITY shortcuts SYSTEM "shortcuts.docbook"> - <!ENTITY tdebase-apps SYSTEM "tdebase-apps.docbook"> - <!ENTITY tdeadmin-apps SYSTEM "tdeadmin-apps.docbook"> - <!ENTITY tdegames-apps SYSTEM "tdegames-apps.docbook"> - <!ENTITY tdepim-apps SYSTEM "tdepim-apps.docbook"> - <!ENTITY tdegraphics-apps SYSTEM "tdegraphics-apps.docbook"> - <!ENTITY tdemultimedia-apps SYSTEM "tdemultimedia-apps.docbook"> - <!ENTITY tdenetwork-apps SYSTEM "tdenetwork-apps.docbook"> - <!ENTITY tdeutils-apps SYSTEM "tdeutils-apps.docbook"> - <!ENTITY tdeedu-apps SYSTEM "tdeedu-apps.docbook"> - <!ENTITY tdetoys-apps SYSTEM "tdetoys-apps.docbook"> - <!ENTITY ug-faq SYSTEM "ug-faq.docbook"> - <!ENTITY more-help SYSTEM "more-help.docbook"> - <!ENTITY staff SYSTEM "staff.docbook"> - <!ENTITY % addindex "IGNORE"> - <!ENTITY % Slovenian "INCLUDE" > <!-- change language only here --> -]> - -<book lang="&language;"> -<bookinfo> -<title>Namizno okolje K (K Desktop Environment)</title> -<authorgroup> -<author> <surname>Ekipa KDE</surname> </author> -<othercredit role="translator"><firstname>Andrej</firstname><surname>Vernekar</surname><affiliation><address><email>andrej.vernekar@moj.net</email></address></affiliation><contrib>Prevod</contrib></othercredit> -</authorgroup> - -<date>2002-02-03</date> -<releaseinfo>3.00.00</releaseinfo> - -<copyright> -<year>2000</year><year>2001</year><year>2002</year> -<holder>Ekipa KDE</holder> -</copyright> - -<legalnotice>&GPLNotice;</legalnotice> - -<!-- Please note: This is NOT the final KDE Users Guide, which is not complete. -This is a quick rewrite of the KDE 1.1x user guide, because it was badly out of -date, and so that KDE wasn't released without a users guide entirely. --> - -<abstract><para>To je Uporabniški priročnik KDE, celovita dokumentacija namiznega okolja K (KDE) iz perspektive uporabnika. KDE je zbirka orodij, ki bodo olajšala vaše življenje v UNIX-u in ga naredila bolj uživaško. </para></abstract> - -<keywordset> -<keyword>KDE</keyword> -<keyword>user</keyword> -<keyword>guide</keyword> -</keywordset> -</bookinfo> - -&introduction; -&history; -&installation; -&first-impressions; -&getstarted; -&about-desktop; -&shortcuts; -&ug-faq; -&more-help; -&staff; - -<!-- Packages --> -&tdebase-apps; -&tdeadmin-apps; -&tdegames-apps; -&tdepim-apps; -&tdegraphics-apps; -&tdemultimedia-apps; -&tdenetwork-apps; -&tdeutils-apps; -&tdeedu-apps; -&tdetoys-apps; -<!-- End Packages --> - - - -</book> diff --git a/tde-i18n-sl/docs/tdebase/userguide/installation.docbook b/tde-i18n-sl/docs/tdebase/userguide/installation.docbook deleted file mode 100644 index ad152f6da2b..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/installation.docbook +++ /dev/null @@ -1,238 +0,0 @@ -<chapter id="installation"> -<title>Namestitev </title> - -<epigraph> -<attribution>Linus Torvalds, after finding one of his file systems smashed by a -new Beta kernel</attribution> -<para>Core dumping fsck's tend to make me nervous.</para> -</epigraph> - -<para>Brez skrbi! Čeprav lahko uporaba beta programske opreme povzroči precej težav, ni posebej verjetno, da bi namestitev KDE uničila vaš disk. To poglavje je zasnovano posebej zato, da vas vodi skozi namestiveni proces, tako da lahko kar najhitreje (in s kar najmanj truda) pričnete uporabljati vaše novo namizje. Kot pri vseh namestitvah okenskih upravljalnikov je priporočljivo da naredite varnostno kopijo vseh X11 specifičnih nastavitvenih datotek preden pričnete z namestitvijo. Če ne poznate natančno njihove lokacije, poizkusite z vsemi skritimi datotekami (<filename>.*</filename>) v vašem domačem imeniku in imeniku <filename>/usr/X11/lib/X11/xdm</filename>. </para> - -<sect1 id="requirements"> -<title>Zahteve </title> - -<para>Preden namestite KDE, se prepričajte, da vaš sistem izpolnjuje naslednje zahteve: </para> - -<itemizedlist> <listitem><para>Delujoč, POSIX kompatibilen UNIX sistem. UNIX-i, za katere je znano da delajo s KDE vključujejo: Linux, FreeBSD, Solaris, HP-UX in MkLinux. Trudimo se, da bi bil KDE kmalu dosegljiv na še več platformah. </para></listitem> <listitem><para>Nekaj prostega prostora na particiji, kjer bo ustvarjen <filename>/opt/kde</filename> . Priporočamo, da rezervirate približno 50MB, če vaš sistem podpira deljene knjižnice in ustrezno več, če jih ne. Če morate ali želite zgraditi KDE iz izvornega drevesa potem prosim rezervirajte okrog 100MB v <filename>/usr/src</filename>.</para></listitem> <listitem><para>Delujoč sistem X11 z ali brez <application>xdm</application>. Če še niste namestili X Window System potem najprej preverite namestitveni medij vaše različice UNIX-a, ali vsebuje primerno različico. Če je ne najdete, obiščite <ulink url="http://www.xfree86.org">spletno stran XFree86</ulink> kjer dobite več informacij o tem, kako dobiti in namestiti X Window System, oziroma kontaktirajte vašega UNIX prodajalca UNIX-a za podporo. </para></listitem> <listitem><para>Knjižnice Qt, različice 2.2. Dobite jih lahko na <ulink url="ftp://ftp.troll.no/pub/qt">Troll Techovem FTP strežniku</ulink> v formatih rpm in tgz. </para> </listitem> </itemizedlist> - -<warning><para>Opozorilo preden začnete: Preden nadgradite s prejšnje različice KDE, priporočamo, da storite naslednje:</para> - -<screen> -<command>cd <filename>/opt/kde</filename></command> -<command>tar <option>cfvz <replaceable>~/KDE-old-version-backup.tar.gz</replaceable> * </option></command> -</screen> -</warning> - -</sect1> - -<sect1 id="linux-installing-rpms"> -<title>Linux: nameščanje RPM-ov za RedHat, Caldero in SuSE.</title> - -<para>Uporaba RPM-ov je najlažja metoda da dobite in namestite KDE. Obiščite vaše priljubljen zrcalni strežnik KDE in njegov imenik <filename>/pub/kde/stable/distribution/rpm</filename>. Tukaj lahko vidite imenike za različne operacijske sisteme. Trenutno so podprte arhitekture i386, alpha in sparc. Pakete rpm lahko prav tako najdete na straneh Red Hata kot so sunsite.unc.edu ali ftp.redhat.com. </para> - -<para>Osnovni sistem sestavljajo datoteke <filename>kde-<replaceable>component</replaceable>.<replaceable>architecture</replaceable>.rpm</filename> Rabite najmanj tdesupport, tdelibs in tdebase. Ko ste dobili osnovno distribucijo lahko ostale pakete naložite po želji oziroma le tiste, za katere mislite, da vam bodo prišli prav. </para> - -<para>Sedaj pa lahko pričnete nameščati osnoven paket. Če nameščate KDE prvič, uporabite </para> - -<screen> -<userinput><command>rpm</command> <option>-i </option> <filename>tdesupport.arch.rpm</filename></userinput> -<userinput><command>rpm</command> <option>-i </option> <filename>tdelibs.arch.rpm</filename></userinput> -<userinput><command>rpm</command> <option>-i </option> <filename>tdebase.arch.rpm</filename></userinput> -</screen> - -<important><para>Te komponente morajo biti nameščene v naštetem vrstnem redu inpred vsemi drugimi komponentami KDE.</para></important> - -<para>Če nadgrajujete prejšnjo različico poskusite <screen> -<userinput><command>rpm</command> <option>-Uvh</option> <filename>kde-<replaceable>component</replaceable>.<replaceable>arch</replaceable>.rpm</filename></userinput> -</screen> </para> - -<para>Še nekrat: zgoraj našteti vrstni red mora biti ohranjen in podane komponente morajo biti nameščene pred vsemi drugimi.</para> - -<para>To bo odpakiralo osnovno distribucijo in jo privzeto namestilo v <filename>/opt/kde</filename>.</para> - -<para>Če je bila namestitev osnovnih paketov uspešna, lahko namestite preostale pakete (uporabite <option>-Uvh</option> namesto <option>-i</option> da nadgradite obstoječo različico) na enak način. </para> - -</sect1> - -<sect1 id="installing-debian"> -<title>Linux: nameščanje paketov <acronym>DEB</acronym> za debian</title> - -<para>Tudi namestitev v sistemu Debian je dokaj preprosta. Našli boste le pakete za Debian 2.2 (Potato) in 3.0 (Woody). Opisali bomo nameščanje paketov za Debian 2.2, ki je stabilna različica, saj je Debian 3.0 še v razvoju. Vendar pa je namestitev v obeh različicah skoraj identična. Glavna razlika je v tem, da je KDE v Debian 3.0 uradno vključen in vam ni treba določiti posebne lokacije, da najdete pakete deb za KDE.</para> - -<para>V prvem koraku bomo sistemu povedali, kje lahko najde pakete deb. Seznam naslovov Debian paketov se nahaja na vašem disku v <filename>/etc/apt/sources.list</filename>. V to datoteko morate dodati naslednjo vrstico: <userinput>http://kde.tdyc.com/ stable kde2</userinput></para> - - -<para>Potem morate osvežiti vašo lokalno bazo podatkov, tako da vaš sistem ve, da so na voljo novi paketi. Vtipkajte naslednji ukaz:</para> - -<screen> -<userinput><command>apt-get</command> <option>update</option></userinput> -</screen> - -<para>Končno lahko namestite osnovne komponente KDE. To storite tako, da vtipkate:</para> - -<screen> -<userinput><command>apt-get</command> <option>install tdebase</option></userinput> -</screen> - -<para>Če želite namestiti več komponent KDE poizkusite nekatere ali pa kar vse naslednje možnosti:</para> - -<screen> -<userinput><command>apt-get</command> <option>install task-tdenetwork</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdeadmin</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdetoys</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdeutils</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdemultimedia</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdegraphics</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdepim</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdegames</option></userinput> -<userinput><command>apt-get</command> <option>install task-koffice</option></userinput> -<userinput><command>apt-get</command> <option>install tdebase-docs</option></userinput> -<userinput><command>apt-get</command> <option>install tdm</option></userinput> -</screen> - -<para>Morda vas bo zanimalo kako namestiti vaš jezik.</para> - -<screen> -<userinput><command>apt-get</command> <option>install -tde-i18n-<replaceable>xx</replaceable></option></userinput> - </screen> -<para>kjer morate <replaceable>xx</replaceable> zamenjati s kodo jezika.</para> - -<para>Nastavitvene datoteke KDE bodo nameščene v <filename class="directory">/etc/kde2</filename>, izvedljive v <filename class="directory">/usr/bin</filename> in večina drugih v <filename class="directory">/usr/share</filename> v rezlične imenike. </para> - -<para>Če nadgrajujete s prejšnje različice KDE, potem izvedite naslednje korake. Najprej dopolnite datoteko <filename>/etc/apt/sources.list</filename> tako, da spremenite vrstico z lokacijo paketov KDE v: <userinput>http://kde.tdyc.com/ stable kde2</userinput>. Nato osvežite bazo podatkov paketov:</para> - -<screen> -<userinput><command>apt-get</command> <option>update</option></userinput> -</screen> - -<para>Končno namestite osnovni sitem:</para> - -<screen> -<userinput><command>apt-get</command> <option>install tdebase</option></userinput> -<userinput><command>apt-get</command> <option>dist-upgrade</option></userinput> -</screen> - -<para> Če želite namestiti več komponent KDE poizkusite nekatere ali pa kar vse naslednje možnosti.</para> - -<screen> -<userinput><command>apt-get</command> <option>install task-tdenetwork</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdeadmin</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdetoys</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdeutils</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdemultimedia</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdegraphics</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdepim</option></userinput> -<userinput><command>apt-get</command> <option>install task-tdegames</option></userinput> -<userinput><command>apt-get</command> <option>install task-koffice</option></userinput> -<userinput><command>apt-get</command> <option>install tdebase-docs</option></userinput> -<userinput><command>apt-get</command> <option>install tdm</option></userinput> -</screen> - -</sect1> - -<sect1 id="source-distribution"> -<title>Uporaba TGZ za nameščanje v drugih sistemih </title> - -<para>Če vaša distribucija nima RPM ali DEB arhivskega formata ali pa sloh ne upoprabljate Linuxa, potem morate KDE prevesti sami. V prihodnosti načrtujemo binarno distribucijo, ki vključuje svoj namestitevni program. </para> - -<para>Da lahko prevedete in namestite KDE rabite morajo biti na vašem disku nameščeni naslednji elementi: </para> - -<itemizedlist> <listitem><para>ANSI-C prevajalnik, <abbrev>npr.</abbrev> <abbrev>GNU</abbrev> C compiler (GCC). </para></listitem> <listitem><para>ANSI-C++ prevajalnik, <abbrev>npr.</abbrev> <abbrev>GNU</abbrev> C++ (G++). </para></listitem> <listitem><para>Program <application>make</application>. </para></listitem> <listitem><para>Qt development različice 2.2 ali višje.</para></listitem> <listitem><para>X11 razvijalska različica (include datoteke pogosto manjkajo) </para></listitem> </itemizedlist> - -<para>Ko enkrat imate vse te programe, pojdite na vaš priljubljeni zrcalni strežnik KDE in pridobite sledeče datoteke iz imenika <filename>/pub/kde/stable/<replaceable>(najnovejša različica)</replaceable></filename>:</para> - -<itemizedlist> <listitem><para><filename>tdesupport-<replaceable>version</replaceable>.tar.gz</filename></para></listitem> <listitem><para><filename>tdelibs-<replaceable>version</replaceable>.tar.gz</filename> </para></listitem> <listitem><para><filename>tdebase-<replaceable>version</replaceable>.tar.gz</filename></para></listitem> <listitem><para>katerikoli drug paket, ki ga želite namestiti. Svetujemo vam, da vzamete vsaj tdeutils. </para></listitem> </itemizedlist> - -<para>kjer <replaceable>(version)</replaceable> nadomestite s številko trenutne raličice. Ko ste naložili vse, kar potrebujete, izvlečite te datoteke v <filename>/usr/src</filename>. Ta proces bi moral ustvariti sledečo imeniško strukturo:</para> - -<itemizedlist> <listitem><para><filename>/usr/src/tdesupport</filename></para></listitem> <listitem><para><filename>/usr/src/tdelibs</filename></para></listitem> <listitem><para><filename>/usr/src/tdebase</filename></para></listitem> <listitem><para><filename>/usr/src/...</filename> (katerikoli drug paket)</para></listitem> </itemizedlist> - -<para>Poskrbite, da imate pisalno dovoljenje v <filename>/opt/kde</filename>.</para> - -<para>Sedaj morate prevesti in namestiti pakete z uporabo: </para> - -<procedure> <step><para><command>cd</command> v imenik paketa, ki ga želite namestiti (glejte zgoraj)</para></step> <step><para><command>./configure</command> (z opcijami, ki jih želite uveljaviti)</para></step> <step><para><command>make</command></para></step> <step><para><command>make install</command></para></step> </procedure> - -<para>Uporabite gornje korake na vsakem paketu, ki ga želite namestiti.</para> - -<note><para>Ta navodila so uporabna za skoraj vsak dosegljiv paket izvorne kode, ne le za pakete KDE. </para></note> - -<para>Vsaka prilagoditvena skripta ima na razpolago več opcij. Nekatere so splošne za vse pakete, druge pa specifične za vsakega posebej. Sledeče je rezultat ukaza <command>configure <option>--help</option></command> v tdelibs:</para> - -<screen> -<computeroutput> - --disable-fast-perl disable fast Makefile generation (needs perl) - --enable-debug creates debugging code [default=no] - --enable-strict compiles with strict compiler options (may not work!) - --enable-profile creates profiling infos [default=no] - --enable-final build size optimized apps (experimental - needs lots of memory) - --disable-closure don't delay template instantiation - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=no] - --enable-fast-install[=PKGS] optimize for fast installation [default=yes] - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --disable-libtool-lock avoid locking (might break parallel builds) - --with-pic try to use only PIC/non-PIC objects [default=use both] - --with-extra-includes=DIR - adds non standard include paths - --with-extra-libs=DIR adds non standard library paths - --with-qt-dir=DIR where the root of Qt is installed - --with-qt-includes=DIR where the Qt includes are. - --with-qt-libraries=DIR where the Qt library is installed. - --disable-rpath do not use the rpath feature of ld - --disable-path-check don't try to find out, where to install - --with-xdmdir If the xdm config dir can't be found automaticly - --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name] - --with-shadow If you want shadow password support - --with-krb4[=PATH] Compile in Kerberos v4 support. - --with-afs Compile in AFS support (requires KTH krb4). - --with-ldap[=PATH] Compile in LDAP support. - --with-samba-libs=path Use Samba-tng libs in 'path' [search] - --without-gl disable 3D GL modes - --without-xpm disable color pixmap XPM tests - --without-dpms disable DPMS power saving - --with-x use the X Window System - --with-motif-includes=DIR Motif include files are in DIR - --with-motif-libraries=DIR Motif libraries are in DIR -</computeroutput> -</screen> - -<para>Mnoge opcije niso zahtevane in so uporabne le za premostitev znanih težav(<abbrev>npr.</abbrev> <option>--disable-FEATURE</option>). Ker so nakatere pomembne, na primer <emphasis>--with-shadow</emphasis>, bi morali vedno preveriti dosegljive možnosti.</para> - -<para>Pomembna možnost je <option>--prefix</option>. Ta možnost določa pot, kamor naj configure namešča (za tdesupport in tdelibs) ali kam naj pogleda za knjižnicami (za druge pakete). Privzeto bo configure pogledal v <filename>/opt/kde</filename>. Če želite namestiti KDE v <filename>/usr/local/kde</filename>, morate uporabiti <command>configure <option>--prefix /usr/local/kde</option></command>.</para> - -<para>Če ste namestili knjižnice Qt na nenavadnem mestu, na primer v <filename>$HOME/src/qt</filename>, morate uporabiti <command>configure <option>--with-qt-dir=$HOME/src/qt</option></command>. Privzeto configure pogleda v najbolj običajne kraje, kjer se morda nahajajo Qt, preden obupa.</para> - -<para>Če imate težave, ki jih ne morete rešiti pošljite kopijo datoteke <filename>config.log</filename> na naslov v datoteki <filename>README</filename> v problematičnem paketu.</para> - -<para>KDE morate namestiti v naslednjem vrstnem redu: tdesupport, tdelibs, nato pa programske pakete (na primer tdebase). Vsi programski pakete bi morali biti odvisni le od tdelibs, tako da jih lahko prevajate hkrati (če imate dovolj zmogljiv računalnik).</para> - -<para>Če se želite poslužiti zmožnosti večprocesorskih sistemov, poskusite <command>make <option> -j <replaceable>št. procesorjev</replaceable></option></command> namesto <command>make</command>. </para> - -<sect2> -<title>Od platforme odvisne opombe </title> - -<sect3> -<title>Linux </title> - -<para>Za Linux lahko večino za izgrdnjo KDE potrebnih orodij najdete ali na <ulink url="ftp://sunsite.unc.edu/pub/Linux/GCC">ftp://sunsite.unc.edu/pub/Linux/GCC</ulink> ali pa <ulink url="ftp://sunsite.unc.edu/pub/GNU">ftp://sunsite.unc.edu/pub/GNU</ulink>. The Knjižnice Qt lahko najdete na <ulink url="ftp://ftp.troll.no/pub/qt/linux">ftp://ftp.troll.no/pub/qt/linux</ulink>, dosegljive v obliki izvorne kodaeali pa v formatu RPM. Oba vključujeta podrobna navodila o tem, kako ju namestiti. Include datoteke za X11 programe bi morale biti dosegljive na <ulink url="ftp://ftp.xfree86.org">ftp://ftp.xfree86.org</ulink> v razdelku xdevel. </para> - -</sect3> -</sect2> -</sect1> - -<sect1 id="suse-install"> -<title>Zahtevane spremebe v vaših nastavitvenih datotekah </title> -<para> Potem ko ste postavili binarne datoteke KDE v njihov končni imenik, je tu še nekaj prilagoditev, ki jih morate narediti v vaših zagonskih skriptah. </para> -<para> Sledeč postopek je bil preizkušen na SuSE Linux 5.0 in bi moral biti združljiv tudi z drugimi popularnimi UNIX-i. <emphasis>Vedno pripravite vrnostne kopije nastavitvenih datotek, preden jih spreminjate!</emphasis> Dodajte sledeče na konec vašega /etc/profile: </para> -<para> <screen>export PATH=$PATH:/opt/kde/bin -export TDEDIR=/opt/kde -</screen> </para> -<para>Nato uredite datoteko .xinitrc v vašem domačem imeniku. Poglejte v vrstico, ki kliče okenski upravljalnik in ga nadomestite s <literal>starttde</literal>.</para> -<para>Sedaj, ko je bilo vse, kar je potrebno za zagon KDE nameščeno, lahko pogledate v 4. poglavje, kjer boste prvič pognali KDE. Če gre kaj narobe, boste morda morali sami prevesti KDE. Preberite <emphasis> <link linkend="source-distribution">Uporaba TGZ za nameščanje v drugih sistemih</link> </emphasis> za več informacij. </para> -<para>Namestitev smo naredili kar se da trpežno, tako da ne bi smeli naleteti na resnejše probleme razen v primeru, da je vaša konfiguracija eksotična. Če pa le naletite na težave, potem ne oklevajte in uporabite <link linkend="mailing-lists">poštne liste KDE</link>. </para> -</sect1> -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/intro.docbook b/tde-i18n-sl/docs/tdebase/userguide/intro.docbook deleted file mode 100644 index cb5f513a983..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/intro.docbook +++ /dev/null @@ -1,15 +0,0 @@ -<chapter id="introduction"> -<title>Uvod</title> - -<para>Dobrodošli v uporabniškem priročniku namiznega okolja K.</para> - -<para>Ta knjiga je mišljena kot uvod v namizno okolje K (KDE), s splošnim opisom uporabniškega vmesnika, nekaj praktičnimi zgledi, kako uporabiti &kde; za vaskodnevno delo in nekaj namigi za prilagoditev namizja.</para> - -<para>Vključena je tabela bližnjic in nekaj namigov in nasvetov, ki naj bi vam pomagali najti stvari hitro in učinkovito.</para> - -<para>Ta knjiga ni uporabniški vodič po posameznih programih, saj imajo ti svoje lastne uporabniške priročnike. Vendar pa je &kde; integrirano okolje — kar se boste naučili v tem priročniku in vašem raziskovanju &kde;-jevegauporabniškega vmesnika, je skladno in prenosljivo med programi &kde;. </para> - -<para>Ta knjiga razišče tudi nekaj filozofije, ki stoji za &kde;, kot tudi nekaj zgodovine, vse skupaj pa zaokroži z nasveti, kako najti več podatkov, če jih morda rabite. </para> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/koffice-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/koffice-apps.docbook deleted file mode 100644 index a345c8b5348..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/koffice-apps.docbook +++ /dev/null @@ -1,17 +0,0 @@ -<chapter id="office-apps"> -<title>Pisarniški programi</title> - -<para>V distribucijah &koffice; lahko dobite naslednje programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bodo v prihodnjem posnetku odpravljene.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&kword;</term> <listitem> <para>Zmogljiv, na okvirjih zasnovan urejevalnik besedil, ki ponuja profesionalne oblike dokumentov.</para> </listitem> </varlistentry> <varlistentry> <term>&kspread;</term> <listitem> <para>Zmogljiva preglednica.</para> </listitem> </varlistentry> <varlistentry> <term>&kpresenter;</term> <listitem> <para>Predstavitveni program, ki ustreza zahtevam za profesionalne predstavitve.</para> </listitem> </varlistentry> <varlistentry> <term>&kivio;</term> <listitem> <para>Program za risanje diagramov.</para> </listitem> </varlistentry> <varlistentry> <term>&kontour;</term> <listitem> <para>Prihajajoč program za vektorsko grafiko.</para> </listitem> </varlistentry> <varlistentry> <term>&kugar;</term> <listitem> <para>Orodje za ustvarjanje poročil poslovne kvalitete.</para> </listitem> </varlistentry> <varlistentry> <term>&kchart;</term> <listitem> <para>Integrirano risarsko orodje za grafe in diagrame.</para> </listitem> </varlistentry> <varlistentry> <term>&koshell;</term> <listitem> <para>Orodje, ki vam pomaga ustvarjati večprogramske dokumente.</para> </listitem> </varlistentry> </variablelist> - -</chapter> - - diff --git a/tde-i18n-sl/docs/tdebase/userguide/more-help.docbook b/tde-i18n-sl/docs/tdebase/userguide/more-help.docbook deleted file mode 100644 index 1d130ce3c50..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/more-help.docbook +++ /dev/null @@ -1,15 +0,0 @@ -<chapter id="more-help"> -<title>Dodatna pomoč</title> - -<sect1 id="mailing-lists"> -<title>Drugi viri pomoči </title> - -<para>Oglejte si <ulink url="http://www.kde.org">spletno stran KDE</ulink>, kjer najdete najnovejše informacije o KDE, ki so dosegljive v spletu. Morda se boste želeli prijaviti (naročiti) v katerega izmed naših poštnih seznamov. </para> - -<para>Pošljite e-pošto na naveden naslov s <userinput>subscribe</userinput> <userinput>vaš e-poštni naslov</userinput> v predmetu (subject) sporočila, da se tako prijavite: </para> - -<simplelist> <member>splošna poštna lista KDE, <email>kde-request@kde.org</email> </member> <member>poštna lista razvijalcev KDE, <email>kde-devel-request@kde.org</email></member> <member>razprave o izgledu KDE (look and feel), <email>kde-look-request@kde.org</email></member> <member>KDE naznanila, <email>kde-announce-request@kde.org</email></member> <member>vprašanja o licenci KDE, <email>kde-licensing-request@kde.org</email></member> <member>uporabniška poštna lista, <email>kde-user-request@kde.org</email></member> <member>lista piscev dokumentacije KDE, <email>kde-doc-request@kde.org</email></member> </simplelist> - -</sect1> -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/shortcuts.docbook b/tde-i18n-sl/docs/tdebase/userguide/shortcuts.docbook deleted file mode 100644 index 41e886b4b0a..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/shortcuts.docbook +++ /dev/null @@ -1,26 +0,0 @@ -<chapter id="shortcuts"> -<title>Namigi & triki za vaše vsakodnevno delo </title> - -<epigraph> -<attribution>Fortune Cookies</attribution> -<para>Everyone can make an omelet with eggs. The trick is to make one with none.</para> -</epigraph> - -<para>Skoraj vsakdo lahko uporablja &kde; zaradi tega so ga razvijalci naredili. Ni kriptičnih in neugotovljivih stikal in malo natavitvenih datotek, ki bi jih morali urejati v načinu <acronym>ASCII</acronym>. Obstaja pa nekaj načinov, ki vam omogočajo bolj elegantno opravljanje dela, ki vam prihranijo čas za resnično pomembne stvari, kot je na primer &ksirtet;.</para> - -<sect1 id="shortcut-table"> -<title>Tabela bližnjic </title> - -<variablelist> <varlistentry> <term><keycombo>&Alt;<keycap>Tab</keycap> </keycombo> ali <keycombo>&Alt;&Shift;<keycap>Tab</keycap></keycombo></term> <listitem><para>Preklapljaj med okni </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Ctrl;<keycap>Tab</keycap> </keycombo> ali <keycombo>&Ctrl;&Shift;<keycap>Tab</keycap> </keycombo></term> <listitem><para>Preklapljaj med namizji </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Alt;<keycap>F2</keycap> </keycombo></term> <listitem><para>Mini ukazna vrstica</para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Alt;<keycap>F3</keycap></keycombo></term> <listitem><para>Menu oken </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Alt;<keycap>F4</keycap> </keycombo></term> <listitem><para>Zapri trenutno okno </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Ctrl;<keycap>F{1..8}</keycap></keycombo></term> <listitem><para>Preklopi na željeno namizje </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Ctrl;&Alt;<keycap>Esc</keycap> </keycombo></term> <listitem><para>Uničevalec oken (vsako okno, na katerega kliknete, bo uničeno). Če želite ubijalski kurzor preklicati, pritisnite to kombinacijo še enkrat. </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Ctrl;&Alt;<keycap>Backspace</keycap> </keycombo></term> <listitem><para>To konča &kde; (brez shranjevanja!) Uporabite le kot zadnji izhod </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Ctrl;&Alt;<keycap>Numpad +</keycap></keycombo></term> <listitem><para>Preklopi na naslednjo ločljivost zaslona. Če želite, da bo to delalo, morate pravilno nastaviti strežnik X (&X-Server;). </para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Ctrl;&Alt;<keycap>Numpad -</keycap> </keycombo></term> <listitem><para>Preklopi na prejšnjo ločljivost zaslona. Če želite, da bo to delalo, morate pravilno nastaviti strežnik X (&X-Server;).</para></listitem> </varlistentry> </variablelist> - -</sect1> - -<sect1 id="mouse-techniques"> -<title>Tehnike uporabe miške </title> - -<variablelist> <varlistentry> <term>Klik z gumbom na rob ali naslovno letev</term> <listitem> <variablelist> <varlistentry> <term><mousebutton>Levi</mousebutton></term> <listitem><para>Aktivira in prikliče okno v ospredje.</para></listitem> </varlistentry> <varlistentry> <term><mousebutton>Srednji</mousebutton></term> <listitem><para>Pošlje okno v ozadje</para></listitem> </varlistentry> <varlistentry> <term><mousebutton>Desni</mousebutton></term> <listitem><para>Prikaže <guimenu>okenski menu</guimenu>, če je okno aktivno, sicer ga aktivira.</para></listitem> </varlistentry> </variablelist> </listitem> </varlistentry> <varlistentry> <term>Dvojni klik na naslovu okna</term> <listitem><para>Zasenči okno (<quote>ga zvije</quote>, tako da je vidna le naslovna vrstica).</para></listitem> </varlistentry> <varlistentry> <term>Vlečenje na naslovni letvi</term> <listitem><para>Premika okno naokrog.</para></listitem> </varlistentry> <varlistentry> <term>Vlečenje na robovih ali vogalih</term> <listitem><para>Spremeni velikost okna.</para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Alt;<mousebutton>Levi</mousebutton></keycombo> gumb</term> <listitem><para>Premika okno naokrog.</para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Alt;<mousebutton>Srednji</mousebutton> </keycombo> gumb</term> <listitem><para>Prikliče okno v ospredje.</para></listitem> </varlistentry> <varlistentry> <term><keycombo>&Alt;<mousebutton>Desni</mousebutton> </keycombo> gumb</term> <listitem><para>Spremeni velikost okna v smeri, v katero povlečete z miško.</para></listitem> </varlistentry> <varlistentry> <term>Klik na ikono levo na vrhu</term> <listitem><para>Zapre program</para></listitem> </varlistentry> <varlistentry> <term>Klik na 'lepljivi' gumb</term> <listitem><para>Preklaplja med lepljivostjo </para></listitem> </varlistentry> <varlistentry> <term>Klik na Razpni</term> <listitem> <variablelist> <varlistentry> <term><mousebutton>Levi</mousebutton></term> <listitem><para>Razširi okno čez cel zaslon</para></listitem> </varlistentry> <varlistentry> <term><mousebutton>Srednji</mousebutton></term> <listitem><para>Razširi le navpično</para></listitem> </varlistentry> <varlistentry> <term><mousebutton>Desni</mousebutton></term> <listitem><para>Razširi le vodoravno</para></listitem> </varlistentry> </variablelist> </listitem> </varlistentry> </variablelist> - -</sect1> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/staff.docbook b/tde-i18n-sl/docs/tdebase/userguide/staff.docbook deleted file mode 100644 index bbc29ff7c08..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/staff.docbook +++ /dev/null @@ -1,51 +0,0 @@ -<chapter id="docu-staff"> -<title>Epilog </title> - -<epigraph> -<attribution>The end of Evita</attribution> -<para>She had her moments, she had some style, the best show in town was the crowd, outside the Casa Rosada crying 'Eva Peron'; but that's all gone now...</para></epigraph> - -<para>Upamo, da se vam je zdel ta dokument uporaben, informativen in morda celo zabaven. Sledeče stvari niso potrebne za razumevanje namiznega okolja K (KDE), vendar pa jih boste morda vseeno želeli prebrati. </para> - -<sect1 id="the-k-documentation-staff"> -<title>Avtorji dokumentacije </title> - -<para>Ta uporabniški priročnik je osvežila za 3.0 in ga tudi vzdržuje Lauri Watts <email>vampyr@atconnex.net</email></para> - -<para>K temu dokumentu so prispevali še mnogi drugi.</para> -<itemizedlist> <listitem><para>Pablo de Vicente <email>vicente@oan.es</email>, ki je osvežil razdelek, ki opisuje nameščanje KDE 2.0 v Debianu.</para></listitem> <listitem><para>Andreas Buschka <email>andi@circe.tops.net</email></para></listitem> <listitem><para>Robert D. Williams <email>rwilliam@kde.org</email></para></listitem> <listitem><para>Poul Gerhard</para></listitem> <listitem><para>John Waalkes</para></listitem> <listitem><para>Vernon Wells</para></listitem> <listitem><para>Kay Lutz</para></listitem> <listitem><para>Stephan Kulow</para></listitem> </itemizedlist> -</sect1> - -<sect1 id="we-still-need-people"> -<title>Še vedno rabimo ljudi! </title> - -<para>KDE je ogromen projekt in vsak, ki podpira KDE je to že spoznal. Vsi se zelo trudimo, da bi ustvarili uporabniški vmesnik, ki je preprost za uporabo in ima morda potencial, da naredi UNIX primeren za namizne PC-je. Imate možnost sodelovati v tem projektu in bili bi zelo hvaležni, če bi. Razvijalci in zainteresirani uporabniki komunicirajo preko večih poštnih list opisanih v <xref linkend="mailing-lists"/>. Če želite pomagati, prosim ne oklevajte! Še vedno iščemo ljudi, ki so pripravljeni pomagati v naslednjih oddelkih: </para> - -<itemizedlist> <listitem><para>Razvoj (knjižnice in programi)</para></listitem> <listitem><para>Dokumentacija</para></listitem> <listitem><para>Grafika</para></listitem> <listitem><para>Beta testiranje</para></listitem> <listitem><para>in seveda vse ostalo :-) </para></listitem> </itemizedlist> - -</sect1> - -<sect1 id="legal-notices"> -<title>Pravne opombe </title> - -<para>Ta dokument vsebuje avtorsko zaščiten material naslednjih avtorjev: Andreasa Buschke, Gerharda Poula, Roberta Davida Williamsa. Vse zaščitne znamkeregistrirana imena, ki so bile omenjene so last njihovih zakonitih lastnikov. </para> - -</sect1> - -<sect1 id="sources-of-information-used-during-the-creat"> -<title>Viri informacij, uporabljeni pri pisanju te knjige </title> - -<para>Med pisanjem te knjige so avtorji uporabljali naslednje vire informacij: </para> - -<itemizedlist> <listitem><para>Poštne liste KDE </para></listitem> <listitem><para>Razne datoteke <filename>README</filename> in <abbrev>HTML</abbrev> datoteke sistema pomoči, ki so bile na voljo s komponentami KDE </para></listitem> </itemizedlist> - -</sect1> - -<sect1 id="license"> -<title>Dovoljenje</title> - -&underGPL; - -</sect1> -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdeadmin-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdeadmin-apps.docbook deleted file mode 100644 index 0cb3ae67e6c..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdeadmin-apps.docbook +++ /dev/null @@ -1,15 +0,0 @@ -<chapter id="tdeadmin-applications"> -<title>Administrativni programi (tdeadmin)</title> - -<para>V distribuciji tdeadmin lahko najdete spodaj naštete programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bo v prihodnjem posnetku odpravljen.</para> <para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&kcron;</term> <listitem><para>&kde; doda <application>Cron</application>ovim sposobnostim razporejanja opravil lep in intuitiven grafični vmesnik.</para></listitem> </varlistentry> <varlistentry> <term>&kuser;</term> <listitem><para>Grafični upravljalnik uporabnikov (za delovanje zahteva administratorske (<systemitem class="username">root</systemitem>) privilegije)</para></listitem> </varlistentry> <varlistentry> <term>&kpackage;</term> <listitem><para>Vzdržujte vaš sistem na zadnjem nivoju s &kde;-jevim lastnim upravljalnikom paketov.</para></listitem> </varlistentry> <varlistentry> <term>&kdat;</term> <listitem><para>Pripomoček za varnostne kopije namenjen lastnikom tračnih enot.</para></listitem> </varlistentry> <varlistentry> <term>&ksysv;</term> <listitem><para>Urejevalnik SysV-Init, ki vam pomaga ohranjati organiziran zagon računalnika.</para></listitem> </varlistentry> <varlistentry> <term>&kwuftpd;</term> <listitem><para>Grafičen vmesnik za nastavitev <application>wuftpd</application> &FTP; demona.</para></listitem> </varlistentry> </variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdebase-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdebase-apps.docbook deleted file mode 100644 index 6d951e561df..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdebase-apps.docbook +++ /dev/null @@ -1,16 +0,0 @@ -<chapter id="tdebase-applications"> -<title>Osnovni programi (tdebase)</title> - -<para>V distribuciji tdebase lahko najdete spodaj naštete programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bo v prihodnjem posnetku odpravljen.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&twin;</term> <listitem><para>&kde;-jev lastni okenski upravljalnik</para></listitem> </varlistentry> <varlistentry> <term>&konqueror;</term> <listitem><para>Brskajte z enako lahkoto po spletu, vašem disku ali &FTP; strani.</para></listitem> </varlistentry> <varlistentry> <term>&kicker;</term> <listitem><para>&kde; pult, ki vključuje opravilno vrstico, pager, uro in menu <guimenu>K</guimenu>.</para></listitem> </varlistentry> <varlistentry> <term>&konsole;</term> <listitem><para>Zelo nastavljiv X terminalski emulator.</para></listitem> </varlistentry> <varlistentry> <term>&kate;</term> <listitem><para>Zmogljiv urejevalnik besedil, ki zna barvati skladnjo, ponuja upravljanje projektov in še veliko več.</para> </listitem> </varlistentry> <varlistentry> <term>&kwrite;</term> <listitem><para>Osnoven urejevalnik besedil, ki pa še vedno zna barvati skladnjo in ima veliko zmožnosti.</para> </listitem> </varlistentry> <varlistentry> <term>&klipper;</term> <listitem><para>Odložišče z razliko - prilagodite lahko različna dejanja osnovana na stvareh, ki jih prepisujete.</para></listitem> </varlistentry> <varlistentry> <term><application>KDesktop</application></term> <listitem><para>Namizje samo.</para></listitem> </varlistentry> <varlistentry> <term>&khelpcenter;</term> <listitem><para>&kde;-jevo lastno središče pomoči, ki je sposobno brskati po straneh man in info.</para></listitem> </varlistentry> <varlistentry> <term>&tdm;</term> <listitem><para>&kde;-jev upravljalnik prijav</para></listitem> </varlistentry> <varlistentry> <term>&kcontrol;</term> <listitem><para>Nadzorni pult (središče). Skoraj vse, kar se da v &kde; prilagoditi lahko prilagodite od tu - v &kde; pa lahko prilagodite svojemu okusu skoraj vse.</para></listitem> </varlistentry> <varlistentry> <term>&kwrite;</term> <listitem><para>Zelo prilagodljiv urejevalnik besedil, ki zna barvati skladnjo (C/C++, HTML...).</para></listitem> </varlistentry> <varlistentry> <term>&kappfinder;</term> <listitem><para>Pripomoček za dodajanje ne-&kde; programov v vaš menu <guimenu>K</guimenu>, ki vam prihrani ročno opravljanje tega.</para></listitem> </varlistentry> <varlistentry> <term>&tdescreensaver;</term> <listitem><para>Vsi imajo radi ohranjevalnike zaslonov in &kde; vam pri tem pomaga.</para></listitem> </varlistentry> <varlistentry> <term>&ksysguard;</term> <listitem><para>Omrežno usposobljen sistemski monitor, ki vključuje dodano funkcionalnost ukaza <application>top</application></para></listitem> </varlistentry> <varlistentry> <term>&ktip;</term> <listitem><para>Čarovnik Kandalf vam daje nasvete in zanimive informacije.</para></listitem> </varlistentry> <varlistentry> <term>&kmenuedit;</term> <listitem><para>Preuredite menu <guimenu>K</guimenu> s tem pripomočkom.</para></listitem> </varlistentry> </variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdeedu-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdeedu-apps.docbook deleted file mode 100644 index 5e4f545b474..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdeedu-apps.docbook +++ /dev/null @@ -1,147 +0,0 @@ -<chapter id="edutainment-apps"> -<title>tdeedu applications</title> - -<para>You can get the following applications in the tdeedu -distributions.</para> - -<para>Stable applications are relatively bug free and come in source and binary -formats.</para> - -<para><ulink -url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Unstable versions change daily and are only in source form, meaning you -must compile them to get a working version. Remember these are unstable and -might not even compile. If you have a problem with an unstable application, -report the problem and it will most likely be fixed in a future snapshot.</para> -<para><ulink -url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> -<varlistentry> -<term>&klettres;</term> -<listitem> -<para> -Very small children can learn the alphabet, using audio and/or visual cues. -</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kmessedwords;</term> -<listitem> -<para> -A simple mind-training game, in which you have to <quote>figure -out</quote> the word that has been given in the program. -</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&ktouch;</term> -<listitem> -<para> -A program to help you learn to touch type. -</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&keduca;</term> -<listitem> -<para> -An educational project to allow the creation and revision of form -based tests/exams. -</para> -</listitem> -</varlistentry> - -<!-- -<varlistentry> -<term>&kmathhelp;</term> -<listitem> -<para> -A collection of math tools. There's something here for parents, -teachers, and kids alike. -</para> -</listitem> -</varlistentry> - - -<varlistentry> -<term>&knumbers;</term> -<listitem> -<para> -This program aims to help a child (aged 10-12) to revise things about -numbers, like expanded numbers. -</para> -</listitem> -</varlistentry> - - -<varlistentry> -<term>&klearnspelling;</term> -<listitem> -<para> -Hold your own spelling bees. -</para> -</listitem> -</varlistentry> ---> - -<varlistentry> -<term>&kstars;</term> -<listitem> -<para>Put a planetarium on your desktop. &kstars; contains a huge -amount of reference material, and includes the ability to download -photographs of items you see in the heavens.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kgeo;</term> -<listitem> -<para>Even geometry is fun with &kgeo;.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kvoctrain;</term> -<listitem> -<para>Learning another language is easier with &kvoctrain; to practise -and expand your vocabulary.</para> -</listitem> -</varlistentry> - -<!-- -<varlistentry> -<term>&kpercentage;</term> -<listitem> -<para> -A small math application that will help pupils to improve their skills in calculating percentages. -</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kverbos;</term> -<listitem> -<para> -&kverbos; is an application specially designed to study Spanish verb forms. -</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kalzium;</term> -<listitem> -<para>&kalzium; helps you learn the periodic table of elements.</para> -</listitem> -</varlistentry> - ---> - -</variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdegames-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdegames-apps.docbook deleted file mode 100644 index 0bfa7fbb9a9..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdegames-apps.docbook +++ /dev/null @@ -1,174 +0,0 @@ -<chapter id="entertainment-applications"> -<title>Entertainment Applications</title> - -<para>You can get the following applications in the tdegames -distributions.</para> - -<para>Stable applications are relatively bug free and come in source -and binary formats.</para> - -<para><ulink -url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> -<para>Unstable versions change daily and are only in source form, -meaning you must compile them to get a working version. Remember -these are unstable and might not even compile. If you have a problem -with an unstable application, report the problem and it will most -likely be fixed in a future snapshot.</para> <para><ulink -url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> -<varlistentry> -<term>&kenolaba;</term> -<listitem><para>A Network enabled board game you can play against the computer or -against another player on your network.</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kasteroids;</term> -<listitem><para> -A little space shoot-em-up. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&katomic;</term> -<listitem><para> -A perplexing little logic puzzle game, where you get to build your own molecules. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kblackbox;</term> -<listitem><para> -A &kde; rewrite of the classic <application>Emacs</application> blackbox game. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kbackgammon;</term> -<listitem><para> -Backgammon, the &kde; way. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kjumpingcube;</term> -<listitem><para> -A tactical one or two player game that's harder than it looks. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kmahjongg;</term> -<listitem><para> -The classic tile matching game. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kmines;</term> -<listitem><para> -Find the mines without making them explode. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&konquest;</term> -<listitem><para> -Expand your interstellar empire across the galaxy and of course, crush your -rivals in the process. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kpatience;</term> -<listitem><para> -No computer is complete without Patience. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kpoker;</term> -<listitem><para> -A &kde; version of those addictive one armed bandits. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kreversi;</term> -<listitem><para> -A &kde; version of the classic game. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ksame;</term> -<listitem><para> -Addictive little logic game. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kshisen;</term> -<listitem><para> -Another tile matching game. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ksirtet;</term> -<listitem><para> -Play either a version of Tetris, or the well known (in Japan) game Puyo-Puyo. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ksmiletris;</term> -<listitem><para> -A slightly different from the norm Tetris clone. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ksnake;</term> -<listitem><para> -The classic nibbles game gets an update and a speed boost. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ksokoban;</term> -<listitem><para> -Push those crates to get where you need to go. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&kspaceduel;</term> -<listitem><para> -Shoot your enemy down, in a challenging two player arcade game. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ktron;</term> -<listitem><para> -Classic keep-away - keep away from your foe, the walls, and your own tail. -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&ktuberling;</term> -<listitem><para> -One for the little ones, who could resist the potato guy? -</para></listitem> -</varlistentry> - -<varlistentry> -<term>&lskat;</term> -<listitem><para> -A tricky card game -</para></listitem> -</varlistentry> -</variablelist> -</chapter> diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdegraphics-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdegraphics-apps.docbook deleted file mode 100644 index 5d56e27d15a..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdegraphics-apps.docbook +++ /dev/null @@ -1,16 +0,0 @@ -<chapter id="graphical-applications"> -<title>Grafični programi</title> - -<para>V distribuciji tdegraphics lahko najdete naslednje, spodaj naštete programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bodo v prihodnjem posnetku odpravljene.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&kuickshow;</term> <listitem> <para>Hiter in zmogljiv pregledovalnik slik</para> </listitem> </varlistentry> <varlistentry> <term>KPosnetek</term> <listitem><para> Pripomoček za snemanje zaslonov. </para></listitem> </varlistentry> <varlistentry> <term>&kfract;</term> <listitem><para> Majhen generator fraktalov. </para></listitem> </varlistentry> <varlistentry> <term>&kview;</term> <listitem><para> Zmogljiv preglejevalnik slik, sposoben prikazati mnoge formate. </para></listitem> </varlistentry> <varlistentry> <term>&kghostview;</term> <listitem><para> &kde;-jev lastni preglejevalnik &PostScript;a. </para></listitem> </varlistentry> <varlistentry> <term>&kfax; in <application>KViewFax</application></term> <listitem><para> Pripomočka za ogled in ravnanje s faksi. </para></listitem> </varlistentry> <varlistentry> <term>&kdvi;</term> <listitem><para> Pregledovalnik &DVI;. </para></listitem> </varlistentry> <varlistentry> <term>&kruler;</term> <listitem> <para>Zaslonsko ravnilo; je zelo uporabno za delo s slikami ali stranmi <acronym>HTML</acronym>.</para> </listitem> </varlistentry> </variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdemultimedia-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdemultimedia-apps.docbook deleted file mode 100644 index 79c5d374090..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdemultimedia-apps.docbook +++ /dev/null @@ -1,17 +0,0 @@ -<chapter id="multimedia-applications"> -<title>Večpredstavni programi</title> - -<para>V distribuciji tdemultimedia lahko najdete spodaj naštete programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bodo v prihodnjem posnetku odpravljene.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&kmix;</term> <listitem><para>Pult mešalne mize</para></listitem> </varlistentry> <varlistentry> <term>&aktion;</term> <listitem><para>Predvajalnik za filme in animacije s podporo za mnoge formate.</para></listitem> </varlistentry> <varlistentry> <term>&noatun;</term> <listitem><para>Predvajalnik zvočnih datotek, s podporo mnogim formatom, seznamom za predvajanje in celo videom.</para></listitem> </varlistentry> <varlistentry> <term>&kaboodle;</term> <listitem> <para>Lahek, prilagodljiv enopotezni večpredstavnostni predvajalnik - brez seznamov, olepšav, ki bi ga upočasnile, le hitro predvaja eno samo datoteko.</para> </listitem> </varlistentry> <varlistentry> <term>&kscd;</term> <listitem><para>&kde;-jev predvajalnik &CD;, s podporo <acronym>CDDB</acronym>.</para></listitem> </varlistentry> <varlistentry> <term>&tdemid;</term> <listitem><para> Predvajalnik MIDI s podporo za petje.. vaš lasten predvajalnik Karaoke! </para></listitem> </varlistentry> <varlistentry> <term>&tdemidi;</term> <listitem><para> Prijetno zveneč a procesorsko zahteven predvajalnik MIDI </para></listitem> </varlistentry> </variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdenetwork-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdenetwork-apps.docbook deleted file mode 100644 index de964b5fd00..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdenetwork-apps.docbook +++ /dev/null @@ -1,13 +0,0 @@ -<chapter id="network-applications"> -<title>Omrežni programi </title> - -<para>V distribuciji tdenetwork lahko najdete naslednje, spodaj naštete programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink> </para> -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bodo v prihodnjem posnetku odpravljene.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&kmail;</term> <listitem><para>Zmogljiv e-poštni odjemalec, ki omogoča uporabo več strežnikov in različnih identitet.</para></listitem> </varlistentry> <varlistentry> <term>&knode;</term> <listitem><para>Zmogljiv novičarski odjemalec s podporo za več NNTP strežnikov.</para></listitem> </varlistentry> <varlistentry> <term>&kit;</term> <listitem><para>Odjemalec AOL Instant Messenger, uporablja protokol <abbrev>TOC</abbrev> .</para></listitem> </varlistentry> <varlistentry> <term>&ksirc;</term> <listitem><para>Odjemalec IRC</para></listitem> </varlistentry> <varlistentry> <term>&korn;</term> <listitem><para>Vstavek Biff. <application>Korn</application> preverja, ali je prispela nova pošta in vam pove, ko je na voljo za nalaganje z vašega strežnika.</para></listitem> </varlistentry> <varlistentry> <term>&kppp;</term> <listitem><para>Program za klicanje interneta.</para></listitem> </varlistentry> <varlistentry> <term>&ktalkd;</term> <listitem><para> Uporabniki v mreži, ki uporabljajo klasični program <command>talk</command>, lahko celo v &kde; še vedno pritegnejo vašo pozornost z uporabo &ktalkd;; </para></listitem> </varlistentry> </variablelist> -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdepim-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdepim-apps.docbook deleted file mode 100644 index 599bae5f9b5..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdepim-apps.docbook +++ /dev/null @@ -1,15 +0,0 @@ -<chapter id="tdepim-applications"> -<title>Programi iz paketa tdepim</title> - -<para>V distribuciji tdepim lahko najdete spodaj naštete programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bodo v prihodnjem posnetku odpravljene.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&korganizer;</term> <listitem><para>Organizirajte si čas s tem priročnim koledarjem, dnevnikom in razporejevalnikom opravil.</para></listitem> </varlistentry> <varlistentry> <term>&kpilot;</term> <listitem><para>Pripomoček za sinhronizacijo vašega &PalmPilot;a s PC-jem.</para></listitem> </varlistentry> <varlistentry> <term>&kalarm; in &kalarmd;</term> <listitem> <para>Demon, ki pazi na vaše sestanke v koledarju in odjemalec, ki poskrbi, da jih ne zgrešite.</para> </listitem> </varlistentry> </variablelist> -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdetoys-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdetoys-apps.docbook deleted file mode 100644 index c0eea1e4f06..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdetoys-apps.docbook +++ /dev/null @@ -1,88 +0,0 @@ -<chapter id="toys-apps"> -<title>&kde; Toys</title> - -<para>You can get the following applications in the tdetoys -distributions.</para> - -<para>Stable applications are relatively bug free and come in source and binary -formats.</para> - -<para><ulink -url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Unstable versions change daily and are only in source form, meaning you -must compile them to get a working version. Remember these are unstable and -might not even compile. If you have a problem with an unstable application, -report the problem and it will most likely be fixed in a future snapshot.</para> -<para><ulink -url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> -<varlistentry> -<term><application>fifteenapplet</application> and <application>eyesapplet</application></term> -<listitem> -<para>Some little applets to put the fifteen game and some spooky eyes on your panel.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term><application>KAphorism</application></term> -<listitem> -<para>Words of wisdom, based on the date.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kmoon;</term> -<listitem> -<para> -Put the moon in your panel, and keep up with it's phases. -</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kodometer;</term> -<listitem> -<para>Ever wondered how far your mouse travels in a day? Wonder no more.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kscore;</term> -<listitem> -<para>Sports fans can keep up with the latest scores for their favorite team with &kscore;.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kteatime;</term> -<listitem> -<para>The one application no &kde; developer would be without, it reminds you when the beverage that fuels &kde; is ready to drink.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term><application>KWeather</application></term> -<listitem> -<para>Get up to date weather forecasts from your nearest weather station, no matter where you are in the world. Or maybe keep an eye on your next holiday destination.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term>&kworldclock;</term> -<listitem> -<para>Watch as time marches across the world with this nifty applet.</para> -</listitem> -</varlistentry> - -<varlistentry> -<term><application>KTux</application></term> -<listitem> -<para>The &Linux; penguin Tux takes to space in this screensaver.</para> -</listitem> -</varlistentry> -</variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/tdeutils-apps.docbook b/tde-i18n-sl/docs/tdebase/userguide/tdeutils-apps.docbook deleted file mode 100644 index 7048c1dc7e2..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/tdeutils-apps.docbook +++ /dev/null @@ -1,15 +0,0 @@ -<chapter id="utility-applications"> -<title>Potrebščine</title> -<para>V distribuciji tdeutils lahko najdete naslednje programe.</para> - -<para>Stabilne različice imajo relativno malo hroščev in so na voljo v izvorni kodi in binarnih formatih.</para> - -<para><ulink url="ftp://ftp.kde.org/pub/kde/stable/latest/distribution/">ftp.kde.org/pub/kde/stable/latest/distribution/stable</ulink></para> - -<para>Nestabilne različice se spreminjajo dnevno in so na voljo le v obliki izvorne kode, kar pomeni, da jih morate prevesti, da dobite delujočo različico. Zavedajte se, da so nestabilne in se morda sploh ne dajo prevesti. Če imate težave z nestabilnim programom, poročajte o njih in po vsej verjetnosti bodo v prihodnjem posnetku odpravljene.</para> -<para><ulink url="ftp://ftp.kde.org/pub/kde/unstable/CVS/snapshots/current/">ftp.kde.org/pub/kde/unstable/CVS/snapshots/current</ulink></para> - -<variablelist> <varlistentry> <term>&kcharselect;</term> <listitem><para>Izbirnik znakov (prikaže vse znake, ki so na voljo v določeni pisavi, vključno s tistimi, za katere na vaši tipkovnici nimate tipk)</para> </listitem> </varlistentry> <varlistentry> <term>&tdepasswd;</term> <listitem><para>&kde;-jev vmesnik za &UNIX;-ov ukaz <command>passwd</command>.</para> </listitem> </varlistentry> <varlistentry> <term>&tdessh;</term> <listitem><para>&kde;-jev vmesnik za ukaz <command>ssh</command>. </para> </listitem> </varlistentry> <varlistentry> <term>&kdiskfree;</term> <listitem><para>&kde;-jev vmesnik za pripomoček <application>df</application>, z dodano funkcionalnostjo</para> </listitem> </varlistentry> <varlistentry> <term>&kfloppy;</term> <listitem><para>Program, ki omogoča formatiranje disket.</para> </listitem> </varlistentry> <varlistentry> <term>&kedit;</term> <listitem><para>Majhen, preprost urejevalnik, podoben dobro znanemu Notepadu. Primeren je za urejevanje majhnih besedil ali kot preprost pregledovalnik tekstovnih datotek. </para> </listitem> </varlistentry> <varlistentry> <term>&karm;</term> <listitem><para>Časovni sledilnik. Vnesete lahko seznam <quote>opravil</quote>, poženete &karm;ovo uro in beležil bo čas, ki ste ga porabili za označeno opravilo.</para> </listitem> </varlistentry> <varlistentry> <term>&khexedit;</term> <listitem><para>Celovit binarni urejevalnik</para> </listitem> </varlistentry> <varlistentry> <term>&kjots;</term> <listitem><para>Majhen program, ki skrbi za beležke.</para> </listitem> </varlistentry> <varlistentry> <term>&klaptop;</term> <listitem><para>Ponuja nadzor na akumulatorejm vašega prenosnika</para> </listitem> </varlistentry> <varlistentry> <term>&kljettool;</term> <listitem><para>Nadzorni pult za &HP; LaserJet</para> </listitem> </varlistentry> <varlistentry> <term>&klpq;</term> <listitem><para>&klpq; je vmesnik za <application>lpq</application>, <application>lprm</application> in <application>lpc</application>. </para> </listitem> </varlistentry> <varlistentry> <term>&knotes;</term> <listitem><para>Uporaben in lep pripomoček za beležke.</para> </listitem> </varlistentry> </variablelist> - -</chapter> - diff --git a/tde-i18n-sl/docs/tdebase/userguide/ug-faq.docbook b/tde-i18n-sl/docs/tdebase/userguide/ug-faq.docbook deleted file mode 100644 index c84e84c35c2..00000000000 --- a/tde-i18n-sl/docs/tdebase/userguide/ug-faq.docbook +++ /dev/null @@ -1,59 +0,0 @@ -<chapter id="frequently-asked-questions"> -<title>Pogosto zastavljena vprašanja o &kde; </title> - -<epigraph> -<attribution>Batman Animated Series</attribution> -<para>Kaj si ti?</para> -<para>Tvoja najhujša nočna mora...</para> -</epigraph> - -<para>So vprašanja, ki se vedno znova pojavljajo na poštnih seznamih &kde;. Da obdržimo promet v mejah (kar olajša branje seznamov), smo jih vključili v ta razdelek. Prosim bodite dovolj uvidevni in jih ne zastavljajte več - pomislite na gornji citat! </para> - -<!-- pretty short list.. going to watch mailing lists a little, and -see if there aren't any more questions that ought to be here --> - -<qandaset id="faq"> -<qandaentry> -<question><para>Kaj pomeni <quote>&kde;</quote>?</para></question> -<answer><para>KDE je kratica, ki pomeni <emphasis>K Desktop Environment</emphasis>, po slovensko namizno okolje K, in je mišljeno kot zbirka majhnih orodij, okenskega in datotečnega upravljalnika in orodij, ki vse to povezujejo. Ustvarjeno je, da vam olajša življenje v &UNIX;-u. </para></answer> -</qandaentry> - -<qandaentry> -<question><para>Ne morem prevesti paketa xxx</para></question> -<answer> - -<para>Vedno se prepričajte, da imate nameščeno zadnjo različico &kde;-jevih knjižnic. Programska oprema se nenehno razvija, tako da se lahko v primeru, da uporabljate <acronym>CVS</acronym>, odvisnosti spreminjanjo z enega dneva na drugega. Za večino uporabnikov je bolje, če uporabljajo objavljeno različico.</para> - -<para> Prav tako vam bodo morda pomagali <link linkend="source-distribution">splošni namigi za prevajanje</link>. Drug vir težav pa je lahko ta, da uporabljate program pisan za zelo staro različico &kde;, ki je odvisen od zastarelih vključnih (include) datotek. V arhivu izvorne kode poiščite datoteko <filename>README</filename> in poglejte, ali je v njej razloženo, katero različico &kde; rabi ta program.Če to ne pomaga, prosim preverite datume datotek. Morali bi biti novejši kot datumi vaše trenutne različice &kde;.</para> -</answer> -</qandaentry> - -<qandaentry> - -<question><para>Katero različico &kde; naj uporabim za stabilno namizje?</para></question> -<answer><para>&kde; pridobite na različne načine. Že prevedeni binarni paketi v ustreznem formatu (rpm, deb, tgz) z označeno različico (⊀ 3.0) so najboljši način, da vašemu namizju &kde; vcepite stabilnost.</para> - -</answer> -</qandaentry> - -<qandaentry> -<question><para>Vendar pa sem slišal, da je moja težava/želja <quote>že v <acronym>CVS</acronym></quote>. Želim preizkusiti nove lastnosti, zakaj ne bi poskusil s <acronym>CVS</acronym>?</para></question> - -<answer> -<para>Cena stabilnosti je, da je potrebno čakati na vsako novo izdajo, da lahko uživate v novih zmožnostih. Nasprotno pa je cena za to, da ste med prvimi, ki vidijo nove zmožnosti, slabša stabilnot. &kde; ima precej gost urnik izdaj in njihova stabilnost je še posebnega pomena. Večino uporabnikov &kde;, v kolikor ne nameravajo sodelovati pri razvolju, uporaba razvojnih različic ne prinese veliko prednosti.</para> - -<para>Vendar pa je vedno dovolj prostora za izkušene uporabnike, ki vedo, v kaj se spuščajo in so pripravljeni poročati o najdenih hroščih. Če ste to vi, potem ni razloga, da ne bi poskusili različic <acronym>CVS</acronym>. Bodite pripravljeni, da se lahko stvari občasno sesujejo, <acronym>CVS</acronym> vam namreč da posnetek kode, na kateri se trenutno dela.</para> - -<para>To so dnevni posnetki vsega, na čemer delajo razvijalci in nekatere stvari so zanesljivo pokvarjene.</para> - -<warning> -<para><emphasis>Ne zanašajte se na posnetke <abbrev>CVS</abbrev>, da bi vzdrežavali delujoča namizja</emphasis>. Lahko se boste hudo opekli!</para> -</warning> - -</answer> - -</qandaentry> -</qandaset> - -</chapter> - |