1 files changed, 1100 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/kdewebdev/kfilereplace.po b/tde-i18n-zh_TW/messages/kdewebdev/kfilereplace.po
new file mode 100644
index 00000000000..4fa386bb1c0
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/kdewebdev/kfilereplace.po
@@ -0,0 +1,1100 @@
+# translation of kfilereplace.po to Chinese Traditional
+# traditional Chinese translation of kfilereplace.
+#
+# Stanley Wong<stanley18fan0k@yahoo.com.hk>, 2006.
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2007.
+msgid ""
+msgstr ""
+"Project-Id-Version: kfilereplace\n"
+"POT-Creation-Date: 2008-07-08 01:25+0200\n"
+"PO-Revision-Date: 2007-03-27 15:07+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Stanley Wong"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "stanley18fan0k@yahoo.com.hk"
+
+#: configurationclasses.cpp:168
+msgid " Line:%3,Col:%4 - \"%1\" -> \"%2\""
+msgstr " 行：%3，字：%4 - \"%1\" -> \"%2\""
+
+#: kfilereplace.cpp:49
+msgid "Could not find the KFileReplace part."
+msgstr "找不到 KFileReplace part。"
+
+#: kfilereplacelib.cpp:99
+#, c-format
+msgid ""
+"_n: 1 byte\n"
+"%n bytes"
+msgstr "%n 位元組"
+
+#: kfilereplacelib.cpp:105
+msgid "%1 KB"
+msgstr "%1 KB"
+
+#: kfilereplacelib.cpp:111
+msgid "%1 MB"
+msgstr "%1 MB"
+
+#: kfilereplacelib.cpp:117
+msgid "%1 GB"
+msgstr "%1 GB"
+
+#: kfilereplacelib.cpp:140
+msgid ""
+"<qt>Cannot open the file <b>%1</b> and load the string list. This file seems "
+"not to be a valid old kfr file or it is broken.</qt>"
+msgstr "<qt>無法開啟檔案 <b>%1</b> 並載入字串列表。這個檔案似乎不是一個有效的舊 kfr 檔案或它已損壞。</qt>"
+
+#: kfilereplacelib.cpp:158 kfilereplacelib.cpp:171 kfilereplacelib.cpp:177
+msgid "Cannot read data."
+msgstr "無法讀取檔案。"
+
+#: kfilereplacelib.cpp:167
+msgid "Out of memory."
+msgstr "記憶體不足。"
+
+#: kfilereplacepart.cpp:102
+msgid "Ready."
+msgstr "準備好。"
+
+#: kfilereplacepart.cpp:151
+msgid "Search completed."
+msgstr "搜尋完畢。"
+
+#: kfilereplacepart.cpp:164
+msgid ""
+"<qt>You have selected <b>%1</b> as the encoding of the files."
+"<br>Selecting the correct encoding is very important as if you have files that "
+"have some other encoding than the selected one, after a replace you may damage "
+"those files."
+"<br>"
+"<br>In case you do not know the encoding of your files, select <i>utf8</i> "
+"and <b>enable</b> the creation of backup files. This setting will autodetect <i>"
+"utf8</i> and <i>utf16</i> files, but the changed files will be converted to <i>"
+"utf8</i>.</qt>"
+msgstr ""
+"<qt>您已經選擇了 <b>%1</b> 作為檔案的編碼。"
+"<br>選擇正確的編碼是非常重要的。如果檔案的編碼與選擇的不相符，那麼在作取代之後很有可能會導致檔案損壞。"
+"<br>"
+"<br>若您不清楚檔案的編碼，請選擇 <i>utf8</i> 並<b>啟用</b>副本的建立。這個設定會自動偵測 <i>utf8</i> 及 <i>"
+"utf16</i> 的檔案，但是有更動的檔案會被轉換成 <i>utf8</i>。</qt>"
+
+#: kfilereplacepart.cpp:164
+msgid "File Encoding Warning"
+msgstr "檔案編碼警告"
+
+#: kfilereplacepart.cpp:173
+msgid "Replacing files (simulation)..."
+msgstr "正在取代檔案(模擬)..."
+
+#: kfilereplacepart.cpp:174
+msgid "Replaced strings (simulation)"
+msgstr "已取代的字串(模擬)"
+
+#: kfilereplacepart.cpp:178
+msgid "Replacing files..."
+msgstr "正在取代檔案..."
+
+#: kfilereplacepart.cpp:179
+msgid "Replaced strings"
+msgstr "已取代的字串"
+
+#: kfilereplacepart.cpp:233
+msgid "Stopping..."
+msgstr "正在停止..."
+
+#: kfilereplacepart.cpp:247
+msgid "There are no results to save: the result list is empty."
+msgstr "沒有結果要被儲存：結果的列表是空的。"
+
+#: kfilereplacepart.cpp:251
+msgid "Save Report"
+msgstr "儲存報告"
+
+#: kfilereplacepart.cpp:261
+msgid "<qt>A folder or a file named <b>%1</b> already exists.</qt>"
+msgstr "<qt>資料夾或檔案 <b>%1</b> 已經存在。</qt>"
+
+#: kfilereplacepart.cpp:269
+msgid "<qt>Cannot create the <b>%1</b> folder.</qt>"
+msgstr "<qt>無法建立 <b>%1</b> 目錄。</qt>"
+
+#: kfilereplacepart.cpp:347
+msgid "KFileReplace strings"
+msgstr "KFileReplace 字串"
+
+#: kfilereplacepart.cpp:347 kfilereplaceview.cpp:425
+msgid "All Files"
+msgstr "所有檔案"
+
+#: kfilereplacepart.cpp:348
+msgid "Load Strings From File"
+msgstr "從檔案載入字串"
+
+#: kfilereplacepart.cpp:381
+msgid "Cannot open folders."
+msgstr "無法開啟資料夾。"
+
+#: kfilereplacepart.cpp:513
+msgid "KFileReplacePart"
+msgstr "KFileReplacePart"
+
+#: kfilereplacepart.cpp:515
+msgid "Batch search and replace tool."
+msgstr "批次搜尋及取代工具。"
+
+#: kfilereplacepart.cpp:517 main.cpp:38
+msgid "Part of the KDEWebDev module."
+msgstr "KDEWebDev 模組的一部份。"
+
+#: kfilereplacepart.cpp:519 main.cpp:44
+msgid "Original author of the KFileReplace tool"
+msgstr "KFileReplace 工具的原作者"
+
+#: kfilereplacepart.cpp:522 main.cpp:42
+msgid "Current maintainer, code cleaner and rewriter"
+msgstr "目前的維護人員"
+
+#: kfilereplacepart.cpp:525
+msgid "Co-maintainer, KPart creator"
+msgstr "合作維護人員，KPart ，原創者"
+
+#: kfilereplacepart.cpp:528
+msgid "Original german translator"
+msgstr "原德文譯者"
+
+#: kfilereplacepart.cpp:538
+msgid "Sorry, currently the KFileReplace part works only for local files."
+msgstr "對不起，目前 KFileReplace part 只能處理本地檔案。"
+
+#: kfilereplacepart.cpp:538
+msgid "Non Local File"
+msgstr "非本地檔案"
+
+#: kfilereplacepart.cpp:570
+msgid "Customize Search/Replace Session..."
+msgstr "自訂搜尋/取代工作階段..."
+
+#: kfilereplacepart.cpp:571
+msgid "&Search"
+msgstr "搜尋(&S)"
+
+#: kfilereplacepart.cpp:572
+msgid "S&imulate"
+msgstr "模擬(&I)"
+
+#: kfilereplacepart.cpp:573
+msgid "&Replace"
+msgstr "取代(&R)"
+
+#: kfilereplacepart.cpp:574
+msgid "Sto&p"
+msgstr "停止(&P)"
+
+#: kfilereplacepart.cpp:575
+msgid "Cre&ate Report File..."
+msgstr "建立報告檔案(&A)..."
+
+#: kfilereplacepart.cpp:578
+msgid "&Add String..."
+msgstr "加入字串(&A)..."
+
+#: kfilereplacepart.cpp:580
+msgid "&Delete String"
+msgstr "刪除字串(&D)"
+
+#: kfilereplacepart.cpp:581
+msgid "&Empty Strings List"
+msgstr "空白的字串列表(&E)"
+
+#: kfilereplacepart.cpp:582
+msgid "Edit Selected String..."
+msgstr "編輯選擇的字串..."
+
+#: kfilereplacepart.cpp:583
+msgid "&Save Strings List to File..."
+msgstr "儲存字串列表至檔案(&S)..."
+
+#: kfilereplacepart.cpp:584
+msgid "&Load Strings List From File..."
+msgstr "從檔案載入字串列表(&L)..."
+
+#: kfilereplacepart.cpp:585
+msgid "&Load Recent Strings Files"
+msgstr "載入最近的字串檔案(&L)"
+
+#: kfilereplacepart.cpp:586
+msgid "&Invert Current String (search <--> replace)"
+msgstr "倒轉目前字串狀態的位置 (搜尋 <--> 取代)(&I)"
+
+#: kfilereplacepart.cpp:587
+msgid "&Invert All Strings (search <--> replace)"
+msgstr "倒轉所有字串狀態的位置 (搜尋 <--> 取代)(&I)"
+
+#: kfilereplacepart.cpp:590
+msgid "&Include Sub-Folders"
+msgstr "包括子目錄(&I)"
+
+#: kfilereplacepart.cpp:591
+msgid "Create &Backup Files"
+msgstr "建立備份檔案(&B)"
+
+#: kfilereplacepart.cpp:592
+msgid "Case &Sensitive"
+msgstr "區分大小寫(&S)"
+
+#: kfilereplacepart.cpp:593
+msgid "Enable Commands &in Replace String: [$command:option$]"
+msgstr "取代文字中允許使用命令：[$command:opt&ion$]"
+
+#: kfilereplacepart.cpp:594
+msgid "Enable &Regular Expressions"
+msgstr "啟用正規表示式(&R)"
+
+#: kfilereplacepart.cpp:595
+msgid "Configure &KFileReplace..."
+msgstr "設定 &KFileReplace..."
+
+#: kfilereplacepart.cpp:598 kfilereplaceview.cpp:530
+msgid "&Properties"
+msgstr "屬性(&P)"
+
+#: kfilereplacepart.cpp:599 kfilereplaceview.cpp:502
+msgid "&Open"
+msgstr "開啟(&O)"
+
+#: kfilereplacepart.cpp:603 kfilereplaceview.cpp:515
+msgid "&Edit in Quanta"
+msgstr "以 Quanta 編輯"
+
+#: kfilereplacepart.cpp:605 kfilereplaceview.cpp:521
+msgid "Open Parent &Folder"
+msgstr "開啟母目錄(&F)"
+
+#: kfilereplacepart.cpp:607
+msgid "E&xpand Tree"
+msgstr "展開樹狀(&X)"
+
+#: kfilereplacepart.cpp:608
+msgid "&Reduce Tree"
+msgstr "摺叠樹狀(&R)"
+
+#: kfilereplacepart.cpp:609
+msgid "&About KFileReplace"
+msgstr "關於 KFileRepl&ace"
+
+#: kfilereplacepart.cpp:610
+msgid "KFileReplace &Handbook"
+msgstr "KFileReplace 手冊(&H)"
+
+#: kfilereplacepart.cpp:611
+msgid "&Report Bug"
+msgstr "報告錯誤(&R)"
+
+#: kfilereplacepart.cpp:1025 kfilereplacepart.cpp:1113
+#: kfilereplacepart.cpp:1335
+msgid "<qt>Cannot open file <b>%1</b> for reading.</qt>"
+msgstr "<qt>無法開啟檔案 <b>%1</b> 作讀取。</qt>"
+
+#: kfilereplacepart.cpp:1064 kfilereplacepart.cpp:1142
+msgid "<qt>Cannot open file <b>%1</b> for writing.</qt>"
+msgstr "<qt>無法開啟檔案 <b>%1</b> 作寫入。</qt>"
+
+#: kfilereplacepart.cpp:1199
+msgid ""
+"<qt>Do you want to replace the string <b>%1</b> with the string <b>%2</b>?</qt>"
+msgstr "<qt>您要把字串 <b>%1</b> 取代為 <b>%2</b> 嗎?</qt>"
+
+#: kfilereplacepart.cpp:1200
+msgid "Confirm Replace"
+msgstr "取代確認"
+
+#: kfilereplacepart.cpp:1202
+msgid "Do Not Replace"
+msgstr "不要取代"
+
+#: kfilereplacepart.cpp:1406 kfilereplacepart.cpp:1446
+msgid " Line:%2, Col:%3 - \"%1\""
+msgstr " 行：%2，字：%3 - \"%1\""
+
+#: kfilereplacepart.cpp:1512
+msgid "<qt>Cannot open the file <b>%1</b> and load the string list.</qt>"
+msgstr "<qt>無法開啟檔案 <b>%1</b> 並載入字串列表。</qt>"
+
+#: kfilereplacepart.cpp:1520
+msgid ""
+"<qt>File <b>%1</b> seems not to be written in new kfr format. Remember that the "
+"old kfr format will be soon abandoned. You can convert your old rules files by "
+"simply saving them with kfilereplace.</qt>"
+msgstr ""
+"<qt>檔案 <b>%1</b> 似乎不是以新的 kfr 格式寫成。請注意舊 kfr 格式很快就會被廢棄。您可以把它於 KFileReplace "
+"內儲存一次，來達到轉換的效果。</qt>"
+
+#: kfilereplacepart.cpp:1540
+msgid ""
+"<qt>The format of kfr files has been changed; attempting to load <b>%1</b>"
+". Please see the KFilereplace manual for details. Do you want to load a "
+"search-and-replace list of strings?</qt>"
+msgstr ""
+"<qt>kfr 檔案的格式已經改變；正在嘗試載入 <b>%1</b>。請參閱 KFilereplace "
+"手冊取得更多資訊。您要載入一個搜尋-取代字串的列表嗎?</qt>"
+
+#: kfilereplacepart.cpp:1540
+msgid "Load"
+msgstr "載入"
+
+#: kfilereplacepart.cpp:1540
+msgid "Do Not Load"
+msgstr "不要載入"
+
+#: kfilereplacepart.cpp:1629
+msgid "There are no strings to search and replace."
+msgstr "沒有字串要被搜尋及取代。"
+
+#: kfilereplacepart.cpp:1642
+msgid "<qt>The main folder of the project <b>%1</b> does not exist.</qt>"
+msgstr "<qt>專案的主目錄 <b>%1</b> 並不存在。</qt>"
+
+#: kfilereplacepart.cpp:1650
+msgid "<qt>Access denied in the main folder of the project:<br><b>%1</b></qt>"
+msgstr "<qt>專案的主目錄存取被拒：<br><b>%1</b></qt>"
+
+#: kfilereplaceview.cpp:120
+msgid ""
+"<qt>Cannot invert string <b>%1</b>, because the search string would be "
+"empty.</qt>"
+msgstr "<qt>無法倒轉字串 <b>%1</b> 狀態的位置，因為這樣做的話搜尋字串會變成空白。</qt>"
+
+#: kfilereplaceview.cpp:259
+msgid "File %1 cannot be opened. Might be a DCOP problem."
+msgstr "無法開啟檔案 %1。可能是 DCOP 的問題。"
+
+#: kfilereplaceview.cpp:281
+msgid "Do you really want to delete %1?"
+msgstr "您真的要刪除 %1 嗎?"
+
+#: kfilereplaceview.cpp:401
+msgid "No strings to save as the list is empty."
+msgstr "沒有字串要被儲存，因為列表是空的。"
+
+#: kfilereplaceview.cpp:425
+msgid "KFileReplace Strings"
+msgstr "KFileReplace 字串"
+
+#: kfilereplaceview.cpp:426
+msgid "Save Strings to File"
+msgstr "儲存字串至檔案"
+
+#: kfilereplaceview.cpp:437
+msgid "File %1 cannot be saved."
+msgstr "無法儲存檔案 %1。"
+
+#: kfilereplaceview.cpp:507
+msgid "Open &With..."
+msgstr "開啟用(&W)..."
+
+#: knewprojectdlg.cpp:97
+msgid "Project Directory"
+msgstr "專案目錄"
+
+#: knewprojectdlg.cpp:119
+msgid "You must fill the combo boxes (location and filter) before continuing."
+msgstr "您需要填上空格(位置及過濾)才可以繼續。"
+
+#: knewprojectdlg.cpp:127
+msgid "Some edit boxes are empty in the <b>Owner</b> page."
+msgstr "<b>擁有者</b>的頁面中有一些空格未填上。"
+
+#: knewprojectdlg.cpp:137
+msgid "The minimum size is greater than the maximum size."
+msgstr "下限大小比上限大小更大。"
+
+#: main.cpp:25
+msgid "Batch search and replace tool"
+msgstr "批次搜尋及取代工具"
+
+#: main.cpp:31
+msgid "Starting folder"
+msgstr "開始的目錄"
+
+#: main.cpp:37
+msgid "KFileReplace"
+msgstr "KFileReplace"
+
+#: main.cpp:41
+msgid "Shell author, KPart creator, co-maintainer"
+msgstr "Shell 作者，KPart 原創者，合作維護人員"
+
+#. i18n: file kfilereplacepartui.rc line 4
+#: rc.cpp:3 rc.cpp:27
+#, no-c-format
+msgid "Search/&Replace"
+msgstr "搜尋/取代(&R)"
+
+#. i18n: file kfilereplacepartui.rc line 11
+#: rc.cpp:6
+#, no-c-format
+msgid "&Strings"
+msgstr "字串(&S)"
+
+#. i18n: file kfilereplacepartui.rc line 24
+#: rc.cpp:9
+#, no-c-format
+msgid "&Results"
+msgstr "結果(&R)"
+
+#. i18n: file kfilereplacepartui.rc line 55
+#: rc.cpp:21
+#, no-c-format
+msgid "KFileReplace Main Toolbar"
+msgstr "KFileReplace 主工具列"
+
+#. i18n: file kaddstringdlgs.ui line 16
+#: rc.cpp:30
+#, no-c-format
+msgid "Insert Searching/Replacing Strings"
+msgstr "插入搜尋/取代的字串"
+
+#. i18n: file kaddstringdlgs.ui line 38
+#: rc.cpp:33
+#, no-c-format
+msgid "Choose String Adding Mode"
+msgstr "選擇字串加入的模式"
+
+#. i18n: file kaddstringdlgs.ui line 52
+#: rc.cpp:36
+#, no-c-format
+msgid "Search and replace mode"
+msgstr "搜尋 + 取代模式"
+
+#. i18n: file kaddstringdlgs.ui line 63
+#: rc.cpp:39
+#, no-c-format
+msgid "Search only mode"
+msgstr "僅搜尋模式"
+
+#. i18n: file kaddstringdlgs.ui line 106
+#: rc.cpp:42
+#, no-c-format
+msgid "Search for:"
+msgstr "尋找："
+
+#. i18n: file kaddstringdlgs.ui line 135
+#: rc.cpp:45
+#, no-c-format
+msgid "Replace with:"
+msgstr "取代為："
+
+#. i18n: file kaddstringdlgs.ui line 270
+#: rc.cpp:48 rc.cpp:51 rc.cpp:105 rc.cpp:111
+#, no-c-format
+msgid "Search For"
+msgstr "尋找"
+
+#. i18n: file kaddstringdlgs.ui line 322
+#: rc.cpp:54 rc.cpp:108
+#, no-c-format
+msgid "Replace With"
+msgstr "取代為"
+
+#. i18n: file kfilereplaceviewwdg.ui line 58
+#: rc.cpp:66 rc.cpp:87 rc.cpp:204 rc.cpp:222 report.cpp:114
+#, no-c-format
+msgid "Name"
+msgstr "名稱"
+
+#. i18n: file kfilereplaceviewwdg.ui line 69
+#: rc.cpp:69 rc.cpp:90 report.cpp:115
+#, no-c-format
+msgid "Folder"
+msgstr "資料夾"
+
+#. i18n: file kfilereplaceviewwdg.ui line 80
+#: rc.cpp:72 report.cpp:122
+#, no-c-format
+msgid "Old Size"
+msgstr "以往大小"
+
+#. i18n: file kfilereplaceviewwdg.ui line 91
+#: rc.cpp:75 report.cpp:123
+#, no-c-format
+msgid "New Size"
+msgstr "新大小"
+
+#. i18n: file kfilereplaceviewwdg.ui line 102
+#: rc.cpp:78 report.cpp:54
+#, no-c-format
+msgid "Replaced Strings"
+msgstr "被取代的字串"
+
+#. i18n: file kfilereplaceviewwdg.ui line 113
+#: rc.cpp:81 rc.cpp:99 report.cpp:126
+#, no-c-format
+msgid "Owner User"
+msgstr "擁有者用戶"
+
+#. i18n: file kfilereplaceviewwdg.ui line 124
+#: rc.cpp:84 rc.cpp:102 report.cpp:127
+#, no-c-format
+msgid "Owner Group"
+msgstr "擁有者群組"
+
+#. i18n: file kfilereplaceviewwdg.ui line 203
+#: rc.cpp:93 report.cpp:118
+#, no-c-format
+msgid "Size"
+msgstr "大小"
+
+#. i18n: file kfilereplaceviewwdg.ui line 214
+#: rc.cpp:96
+#, no-c-format
+msgid "Found Strings"
+msgstr "找到字串"
+
+#. i18n: file kfilereplaceviewwdg.ui line 427
+#: rc.cpp:114
+#, no-c-format
+msgid "Green means ready"
+msgstr "綠色代表準備好"
+
+#. i18n: file kfilereplaceviewwdg.ui line 430
+#: rc.cpp:117
+#, no-c-format
+msgid "Ready"
+msgstr "準備好"
+
+#. i18n: file kfilereplaceviewwdg.ui line 454
+#: rc.cpp:120
+#, no-c-format
+msgid "Yellow means wait while sorting list"
+msgstr "黃色表示正在進行列表排序"
+
+#. i18n: file kfilereplaceviewwdg.ui line 457
+#: rc.cpp:123
+#, no-c-format
+msgid "Please wait while sorting list"
+msgstr "正在進行列表排序，請稍候"
+
+#. i18n: file kfilereplaceviewwdg.ui line 478
+#: rc.cpp:126
+#, no-c-format
+msgid "Red means scanning files"
+msgstr "紅色代表掃描檔案中"
+
+#. i18n: file kfilereplaceviewwdg.ui line 513
+#: rc.cpp:129
+#, no-c-format
+msgid "Scanned files:"
+msgstr "已掃描的檔案："
+
+#. i18n: file knewprojectdlgs.ui line 16
+#: rc.cpp:132
+#, no-c-format
+msgid "Search & Replace in Files"
+msgstr "於檔案搜尋 & 取代"
+
+#. i18n: file knewprojectdlgs.ui line 89
+#: rc.cpp:138
+#, no-c-format
+msgid "Search Now"
+msgstr "立即搜尋"
+
+#. i18n: file knewprojectdlgs.ui line 103
+#: rc.cpp:141
+#, no-c-format
+msgid "Search Later"
+msgstr "稍後搜尋"
+
+#. i18n: file knewprojectdlgs.ui line 142
+#: rc.cpp:147
+#, no-c-format
+msgid "&General"
+msgstr "一般(&G)"
+
+#. i18n: file knewprojectdlgs.ui line 153
+#: rc.cpp:150
+#, no-c-format
+msgid "Startup Folder Options"
+msgstr "啟動目錄選項"
+
+#. i18n: file knewprojectdlgs.ui line 164
+#: rc.cpp:153
+#, no-c-format
+msgid "Filter:"
+msgstr "過濾器："
+
+#. i18n: file knewprojectdlgs.ui line 175
+#: rc.cpp:156
+#, no-c-format
+msgid "Location:"
+msgstr "位置："
+
+#. i18n: file knewprojectdlgs.ui line 212
+#: rc.cpp:159
+#, no-c-format
+msgid "Insert a search path here. You can use the search path button."
+msgstr "請在這裏輸入搜尋路徑。您可以使用搜尋路徑的按鈕。"
+
+#. i18n: file knewprojectdlgs.ui line 262
+#: rc.cpp:162
+#, no-c-format
+msgid "&Include subfolders"
+msgstr "包括子目錄(&I)"
+
+#. i18n: file knewprojectdlgs.ui line 275
+#: rc.cpp:165
+#, no-c-format
+msgid "Search/Replace Strings"
+msgstr "搜尋/取代字串"
+
+#. i18n: file knewprojectdlgs.ui line 296
+#: rc.cpp:168
+#, no-c-format
+msgid "Search:"
+msgstr "搜尋："
+
+#. i18n: file knewprojectdlgs.ui line 304
+#: rc.cpp:171
+#, no-c-format
+msgid "Replace:"
+msgstr "取代："
+
+#. i18n: file knewprojectdlgs.ui line 314
+#: rc.cpp:174 rc.cpp:270
+#, no-c-format
+msgid "General Options"
+msgstr "一般選項"
+
+#. i18n: file knewprojectdlgs.ui line 328
+#: rc.cpp:177
+#, no-c-format
+msgid "Enable &regular expressions"
+msgstr "啟用正規表示式(&R)"
+
+#. i18n: file knewprojectdlgs.ui line 336
+#: rc.cpp:180
+#, no-c-format
+msgid "Do &backup copy instead of overwrite"
+msgstr "建立一份副本而非覆寫(&B)"
+
+#. i18n: file knewprojectdlgs.ui line 344
+#: rc.cpp:183
+#, no-c-format
+msgid "&Case sensitive"
+msgstr "區分大小寫(&C)"
+
+#. i18n: file knewprojectdlgs.ui line 352
+#: rc.cpp:186
+#, no-c-format
+msgid "Enable co&mmands in the replace string"
+msgstr "在取代字串中允許使用命令(&M)"
+
+#. i18n: file knewprojectdlgs.ui line 360
+#: rc.cpp:189 rc.cpp:276
+#, no-c-format
+msgid "Backup copy suffix:"
+msgstr "副本前置文字："
+
+#. i18n: file knewprojectdlgs.ui line 389
+#: rc.cpp:192 rc.cpp:294
+#, no-c-format
+msgid "Encoding of the files:"
+msgstr "檔案的編碼："
+
+#. i18n: file knewprojectdlgs.ui line 401
+#: rc.cpp:195 rc.cpp:297
+#, no-c-format
+msgid "&Advanced"
+msgstr "進階(&A)"
+
+#. i18n: file knewprojectdlgs.ui line 412
+#: rc.cpp:198
+#, no-c-format
+msgid "Ownership Filtering"
+msgstr "檔案擁有權過濾"
+
+#. i18n: file knewprojectdlgs.ui line 423
+#: rc.cpp:201
+#, no-c-format
+msgid "User: "
+msgstr "使用者："
+
+#. i18n: file knewprojectdlgs.ui line 434
+#: rc.cpp:207 rc.cpp:225
+#, no-c-format
+msgid "ID (Number)"
+msgstr "ID (數字)"
+
+#. i18n: file knewprojectdlgs.ui line 456
+#: rc.cpp:210 rc.cpp:216
+#, no-c-format
+msgid "Equals To"
+msgstr "等於"
+
+#. i18n: file knewprojectdlgs.ui line 461
+#: rc.cpp:213 rc.cpp:219
+#, no-c-format
+msgid "Is Not"
+msgstr "並非"
+
+#. i18n: file knewprojectdlgs.ui line 539
+#: rc.cpp:228
+#, no-c-format
+msgid "Group:"
+msgstr "群組："
+
+#. i18n: file knewprojectdlgs.ui line 565
+#: rc.cpp:231
+#, no-c-format
+msgid "Access Date Filtering"
+msgstr "存取日期過濾"
+
+#. i18n: file knewprojectdlgs.ui line 592
+#: rc.cpp:234
+#, no-c-format
+msgid "Dates valid for:"
+msgstr "對於這些日期是有效的："
+
+#. i18n: file knewprojectdlgs.ui line 600
+#: rc.cpp:237
+#, no-c-format
+msgid "Accessed after:"
+msgstr "在這之前存取過："
+
+#. i18n: file knewprojectdlgs.ui line 608
+#: rc.cpp:240
+#, no-c-format
+msgid "Accessed before: "
+msgstr "在這之後存取過："
+
+#. i18n: file knewprojectdlgs.ui line 624
+#: rc.cpp:243
+#, no-c-format
+msgid "Last Writing Access"
+msgstr "上一次寫入"
+
+#. i18n: file knewprojectdlgs.ui line 629
+#: rc.cpp:246
+#, no-c-format
+msgid "Last Reading Access"
+msgstr "上一次讀取"
+
+#. i18n: file knewprojectdlgs.ui line 737
+#: rc.cpp:249
+#, no-c-format
+msgid "Size Filtering"
+msgstr "大小過濾"
+
+#. i18n: file knewprojectdlgs.ui line 764
+#: rc.cpp:252
+#, no-c-format
+msgid "Minimum si&ze:"
+msgstr "下限大小(&Z)："
+
+#. i18n: file knewprojectdlgs.ui line 772
+#: rc.cpp:255
+#, no-c-format
+msgid "Maximum size:"
+msgstr "上限大小："
+
+#. i18n: file knewprojectdlgs.ui line 822
+#: rc.cpp:258 rc.cpp:261
+#, no-c-format
+msgid "KB"
+msgstr "KB"
+
+#. i18n: file koptionsdlgs.ui line 34
+#: rc.cpp:267
+#, no-c-format
+msgid "General"
+msgstr "一般"
+
+#. i18n: file koptionsdlgs.ui line 56
+#: rc.cpp:273
+#, no-c-format
+msgid "Enable commands in replace strings"
+msgstr "取代字串中允許使用命令"
+
+#. i18n: file koptionsdlgs.ui line 83
+#: rc.cpp:279
+#, no-c-format
+msgid "Notif&y on errors"
+msgstr "有錯誤時提示(&Y)"
+
+#. i18n: file koptionsdlgs.ui line 91
+#: rc.cpp:282
+#, no-c-format
+msgid "Case sensitive"
+msgstr "區分大小寫"
+
+#. i18n: file koptionsdlgs.ui line 102
+#: rc.cpp:285
+#, no-c-format
+msgid "Recursive (search/replace in all sub folders)"
+msgstr "遞迴 (在所有子目錄中搜尋/取代)"
+
+#. i18n: file koptionsdlgs.ui line 116
+#: rc.cpp:288
+#, no-c-format
+msgid "Enable regular e&xpressions"
+msgstr "啟用正規表示式(&X)"
+
+#. i18n: file koptionsdlgs.ui line 124
+#: rc.cpp:291
+#, no-c-format
+msgid "Do &backup copy"
+msgstr "建立副本"
+
+#. i18n: file koptionsdlgs.ui line 168
+#: rc.cpp:300
+#, no-c-format
+msgid "Advanced Options"
+msgstr "進階選項"
+
+#. i18n: file koptionsdlgs.ui line 179
+#: rc.cpp:303
+#, no-c-format
+msgid "Ignore hidden files and folders"
+msgstr "忽略隱藏的檔案及資料夾"
+
+#. i18n: file koptionsdlgs.ui line 187
+#: rc.cpp:306
+#, no-c-format
+msgid "Follow s&ymbolic links"
+msgstr "跟隨符號連結(&Y)"
+
+#. i18n: file koptionsdlgs.ui line 195
+#: rc.cpp:309
+#, no-c-format
+msgid "When searching, stop on first string found (faster but no details)"
+msgstr "搜尋時，找到第一次符合的字串就停止(會快一些，但沒有詳細資料)"
+
+#. i18n: file koptionsdlgs.ui line 206
+#: rc.cpp:312
+#, no-c-format
+msgid "Do not show file if no strings are found or replaced"
+msgstr "找不到/沒有取代到字串的話，不要顯示該檔案"
+
+#. i18n: file koptionsdlgs.ui line 242
+#: rc.cpp:315
+#, no-c-format
+msgid "Show confirmation dialog"
+msgstr "顯示確認對話盒"
+
+#. i18n: file koptionsdlgs.ui line 255
+#: rc.cpp:318
+#, no-c-format
+msgid "Confirm before replace each string"
+msgstr "取代字串之前先確認一下"
+
+#. i18n: file koptionsdlgs.ui line 296
+#: rc.cpp:324
+#, no-c-format
+msgid "&Default Values"
+msgstr "預設值(&D)"
+
+#: report.cpp:41 report.cpp:194
+msgid "<qt>Cannot open the file <b>%1</b>.</qt>"
+msgstr "<qt>無法開啟檔案 <b>%1</b>。</qt>"
+
+#: report.cpp:55
+msgid "Replace with"
+msgstr "取代為"
+
+#: report.cpp:59
+msgid "Total number occurrences"
+msgstr "總共出現次數"
+
+#: report.cpp:60
+msgid "-"
+msgstr "-"
+
+#: report.cpp:68
+msgid "KFileReplace Report"
+msgstr "KFileReplace 報告"
+
+#: report.cpp:73
+msgid "Searching/Replacing Strings Table"
+msgstr "搜尋/取代字串表格"
+
+#: report.cpp:76
+msgid "Search for"
+msgstr "搜尋"
+
+#: report.cpp:111
+msgid "Results Table"
+msgstr "結果表格"
+
+#: report.cpp:201
+msgid "Created by"
+msgstr "建立者"
+
+#: report.cpp:203
+msgid "date"
+msgstr "日期"
+
+#: report.cpp:205
+msgid "Total occurrences"
+msgstr "總共出現次數"
+
+#: whatthis.h:29
+msgid ""
+"Shows the statistics of your operations. Note that the columns content changes "
+"depending on what kind of operation you are performing."
+msgstr "顯示您操作的統計。注意欄位內容的改變會依據您所執行的動作種類而定。"
+
+#: whatthis.h:31
+msgid ""
+"Shows a list of strings to search for (and if you specified it, a list of "
+"strings to replace with). Use the \"add strings\" dialog to edit your string "
+"list or double click on a string."
+msgstr "顯示搜尋的字串清單（以及要取代的字串清單，如果您有指定的話）。用「加入字串」對話框，或是在字串上雙擊來編輯您的字串清單。"
+
+#: whatthis.h:34
+msgid ""
+"Base folder for operations of search/replace. Insert path string here by hand "
+"or use the search button."
+msgstr "搜尋/取代時的基底資料夾。您可以手動在此插入路徑的字串，或是使用搜尋按鍵。"
+
+#: whatthis.h:36
+msgid "Shell-like wildcards. Example: \"*.html;*.txt;*.xml\"."
+msgstr "類似 shell 中的萬用字元。如 *.html，*.txt，*.xml 等。"
+
+#: whatthis.h:38
+msgid ""
+"Insert the minimum file size you want to search, or leave it unchecked if you "
+"don't want minimum size limit."
+msgstr "在此插入您要搜尋的最小檔案大小。若您不打算限制最小檔案大小，則不要勾選。"
+
+#: whatthis.h:40
+msgid ""
+"Insert the maximum file size you want to search, or leave it unchecked if you "
+"don't want maximum size limit."
+msgstr "在此插入您要搜尋的最大檔案大小。若您不打算限制最大檔案大小，則不要勾選。"
+
+#: whatthis.h:42
+msgid ""
+"Insert the minimum value for file access date that you want to search, or leave "
+"it unchecked if you don't a minimum limit."
+msgstr "在此插入您要搜尋的最小檔案存取日期。若您不打算限制最小檔案存取日期，則不要勾選。"
+
+#: whatthis.h:44
+msgid ""
+"Insert the maximum value for file access date that you want to search, or leave "
+"it unchecked if you don't a maximum limit."
+msgstr "在此插入您要搜尋的最大檔案存取日期。若您不打算限制最大檔案存取日期，則不要勾選。"
+
+#: whatthis.h:46
+msgid ""
+"Select  \"writing\" if you want to use the date of the last modification, or  "
+"\"reading\" to use the the date of the last access."
+msgstr "選擇「寫入」使用檔案的最近變更日期，或是「讀取」使用檔案的最近存取日期。"
+
+#: whatthis.h:48
+msgid "Minimum value for access date."
+msgstr "存取日期的最小值。"
+
+#: whatthis.h:50
+msgid "Maximum value for access date."
+msgstr "存取日期的最大值。"
+
+#: whatthis.h:52
+msgid "Insert here the string to search for."
+msgstr "在此插入要搜尋的字串。"
+
+#: whatthis.h:54
+msgid "Insert here the string to replace with."
+msgstr "在此插入要取代的字串。"
+
+#: whatthis.h:57
+msgid "Enable this option if your search is case sensitive."
+msgstr "如果搜尋要區分大小寫，則開啟此選項。"
+
+#: whatthis.h:59
+msgid "Enable this option to search in sub folders too."
+msgstr "如果要同時搜尋子資料夾，則開啟此選項。"
+
+#: whatthis.h:61
+msgid ""
+"Enable this option when you are searching for a string and you are only "
+"interested to know if the string is present or not in the current file."
+msgstr "如果您只要知道您搜尋的字串是否有出現在目前檔案中，則開啟此選項。"
+
+#: whatthis.h:65
+msgid ""
+"If kfilereplace encounters a symbolic link treats it like a normal folder or "
+"file."
+msgstr "如果 kfilereplace 遇到符號連結，則當成一般正常的資料夾或檔案。"
+
+#: whatthis.h:67
+msgid "Enable this option to ignore hidden files or folders."
+msgstr "開啟此選項以忽略隱藏的檔案及資料夾。"
+
+#: whatthis.h:69
+msgid ""
+"If this option is enabled, KFR will show even the names of the files in which "
+"no string has been found or replaced."
+msgstr "開啟此選項的話，即使沒有在檔案中找到或取代字串，kfilereplace 也會顯示其名稱。"
+
+#: whatthis.h:71
+msgid ""
+"Allows you to apply QT-like regular expressions on the search string. Note that "
+"a complex regular expression could affect speed performance"
+msgstr "讓您可以使用 QT 式的正規表示式來表示搜尋字串。注意，如果正規表示式太過複雜，會影響效率與速度。"
+
+#: whatthis.h:73
+msgid ""
+"Enable \"commands\". For example: if search string is \"user\" and replace "
+"string is the command \"[$user:uid$]\", KFR will substitute \"user\" with the "
+"uid of the user."
+msgstr ""
+"開啟「指令」模式。例如，如果搜尋字串是「user」，並且取代字串設為 \"[$user:uid$]\"，kfilereplace 會將 \"user\" "
+"置換為該使用者的使用者代碼（uid）。"
+
+#: whatthis.h:75
+msgid "Enable this option if you want leave original files untouched."
+msgstr "開啟此選項以保留原始檔案不要做修改。"
+
+#: whatthis.h:77
+msgid ""
+"Enable this option if you want to be asked for single string replacement "
+"confirmation."
+msgstr "如果您在每個取代前都要確認，則開啟此選項"
+
+#: whatthis.h:80
+msgid ""
+"Enable this option to perform replacing as a simulation, i.e. without make any "
+"changes in files."
+msgstr "開啟此選項以模擬取代，也就是實際上不做任何變動。"
+
+#: whatthis.h:93
+msgid "Select search-only mode."
+msgstr "選擇只搜尋模式。"
+
+#: whatthis.h:95
+msgid "Select search-and-replace mode."
+msgstr "選擇搜尋與取代模式。"
+
+#: whatthis.h:97
+msgid "Insert here a string you want search for."
+msgstr "在此插入您要搜尋的字串。"
+
+#: whatthis.h:99
+msgid "Insert here the string that KFR will use to replace the search string."
+msgstr "在此插入要用以取代搜尋字串的字串。"