1 files changed, 626 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/tdenetwork/kcmwifi.po b/tde-i18n-zh_TW/messages/tdenetwork/kcmwifi.po
new file mode 100644
index 00000000000..2826e52de60
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdenetwork/kcmwifi.po
@@ -0,0 +1,626 @@
+# translation of kcmwifi.po to Chinese Traditional
+#
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmwifi\n"
+"POT-Creation-Date: 2006-11-25 02:36+0100\n"
+"PO-Revision-Date: 2006-11-01 12:28+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: ifconfigpage.cpp:136
+msgid "Configure Power Mode"
+msgstr "設定電源模式"
+
+#: ifconfigpage.cpp:156
+msgid "Configure Encryption"
+msgstr "設定編碼"
+
+#: kcmwifi.cpp:57 kcmwifi.cpp:172
+#, c-format
+msgid "Config &%1"
+msgstr "設定 &%1"
+
+#: kcmwifi.cpp:82
+msgid ""
+"Error executing iwconfig. WLAN configurations can only be altered if the "
+"wireless tools are properly installed."
+msgstr "執行 iwconfig 時發生錯誤。請確認無線網路設定工具是否已正確安裝。"
+
+#: kcmwifi.cpp:84
+msgid "No Wireless Tools"
+msgstr "沒有無線網路工具"
+
+#: kcmwifi.cpp:149 mainconfig.cpp:94
+#, c-format
+msgid "Vendor %1"
+msgstr "製造商 %1"
+
+#: kcmwifi.cpp:239
+msgid ""
+"Interface could not be shut down.  It is likely that your settings have not "
+"been applied."
+msgstr "無法關閉介面。您的設定可能尚未被套用。"
+
+#: kcmwifi.cpp:252
+msgid "SSID could not be set."
+msgstr "無法設定 SSID。"
+
+#: kcmwifi.cpp:265
+msgid "Operation mode could not be set."
+msgstr "無法設定運作模式。"
+
+#: kcmwifi.cpp:278
+msgid "Speed settings could not be modified."
+msgstr "無法改變速度設定。"
+
+#: kcmwifi.cpp:321
+msgid "Encryption settings could not be set."
+msgstr "無法設定編碼。"
+
+#: kcmwifi.cpp:348
+msgid "Power management settings could not be set."
+msgstr "無法設定電源管理。"
+
+#: kcmwifi.cpp:359
+msgid "Interface could not be re-enabled."
+msgstr "無法重新啟動介面。"
+
+#: kcmwifi.cpp:369
+msgid "The following settings could not be applied:"
+msgstr "以下的設定無法被套用："
+
+#: mainconfig.cpp:42 mainconfig.cpp:99
+#, c-format
+msgid "Config %1"
+msgstr "設定 %1"
+
+#. i18n: file configadvanced.ui line 41
+#: rc.cpp:3
+#, no-c-format
+msgid "Channel:"
+msgstr "頻道："
+
+#. i18n: file configadvanced.ui line 57
+#: rc.cpp:6
+#, no-c-format
+msgid "Transmit power:"
+msgstr "傳輸電源："
+
+#. i18n: file configadvanced.ui line 86
+#: rc.cpp:9
+#, no-c-format
+msgid "Force registration to an access point"
+msgstr "強制向存取點註冊"
+
+#. i18n: file configadvanced.ui line 127
+#: rc.cpp:12
+#, no-c-format
+msgid "MAC address:"
+msgstr "硬體位址："
+
+#. i18n: file configcrypto.ui line 35
+#: rc.cpp:15
+#, no-c-format
+msgid "Crypto Keys"
+msgstr "編碼金鑰"
+
+#. i18n: file configcrypto.ui line 46
+#: rc.cpp:18
+#, no-c-format
+msgid "Key 1:"
+msgstr "金鑰 1："
+
+#. i18n: file configcrypto.ui line 49
+#: rc.cpp:21
+#, no-c-format
+msgid ""
+"The first encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr "第一個編碼金鑰。必須是 5 或 13 個 ASCII 字元，或是 10 或 26 個十六進位值。"
+
+#. i18n: file configcrypto.ui line 57
+#: rc.cpp:24
+#, no-c-format
+msgid "Key 3:"
+msgstr "金鑰 3："
+
+#. i18n: file configcrypto.ui line 60
+#: rc.cpp:27
+#, no-c-format
+msgid ""
+"The third encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr "第三個編碼金鑰。必須是 5 或 13 個 ASCII 字元，或是 10 或 26 個十六進位值。"
+
+#. i18n: file configcrypto.ui line 68
+#: rc.cpp:30
+#, no-c-format
+msgid "Key 2:"
+msgstr "金鑰 2："
+
+#. i18n: file configcrypto.ui line 71
+#: rc.cpp:33
+#, no-c-format
+msgid ""
+"The second encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr "第二個編碼金鑰。必須是 5 或 13 個 ASCII 字元，或是 10 或 26 個十六進位值。"
+
+#. i18n: file configcrypto.ui line 79
+#: rc.cpp:36
+#, no-c-format
+msgid "Key 4:"
+msgstr "金鑰 4："
+
+#. i18n: file configcrypto.ui line 82
+#: rc.cpp:39
+#, no-c-format
+msgid ""
+"The fourth encryption key. 5 or 13 characters are ASCII keys, 10 or 26 "
+"characters are hexadecimal keys."
+msgstr "第四個編碼金鑰。必須是 5 或 13 個 ASCII 字元，或是 10 或 26 個十六進位值。"
+
+#. i18n: file configcrypto.ui line 98
+#: rc.cpp:42
+#, no-c-format
+msgid "<font color=\"#ff0000\">unrecognized</font>"
+msgstr "<font color=\"#ff0000\">無法辨認</font>"
+
+#. i18n: file configcrypto.ui line 117
+#: rc.cpp:45 rc.cpp:48 rc.cpp:51
+#, no-c-format
+msgid "<font color=\"#ff0000\">unrecognised</font>"
+msgstr "<font color=\"#ff0000\">無法辨認</font>"
+
+#. i18n: file configcrypto.ui line 220
+#: rc.cpp:54
+#, no-c-format
+msgid "Crypto Mode"
+msgstr "編碼模式"
+
+#. i18n: file configcrypto.ui line 223
+#: rc.cpp:57
+#, no-c-format
+msgid "Sets which types of packets the card will accept."
+msgstr "設定網卡會接受的封包型態。"
+
+#. i18n: file configcrypto.ui line 234
+#: rc.cpp:60
+#, no-c-format
+msgid "Ope&n"
+msgstr "開啟(&N)"
+
+#. i18n: file configcrypto.ui line 237
+#: rc.cpp:63
+#, no-c-format
+msgid "Makes the card accept encrypted and unencrypted packets."
+msgstr "讓網卡能接受編碼與未編碼的封包。"
+
+#. i18n: file configcrypto.ui line 245
+#: rc.cpp:66
+#, no-c-format
+msgid "Restricted"
+msgstr "限制"
+
+#. i18n: file configcrypto.ui line 248
+#: rc.cpp:69
+#, no-c-format
+msgid "Makes the card only accept encrypted packets."
+msgstr "讓網卡只接受編碼過的封包。"
+
+#. i18n: file configcrypto.ui line 275
+#: rc.cpp:72
+#, no-c-format
+msgid "Key to use:"
+msgstr "使用的金鑰："
+
+#. i18n: file configcrypto.ui line 278
+#: rc.cpp:75
+#, no-c-format
+msgid "Sets which of the four keys is to be used for transmitting packets."
+msgstr "設定要將四個金鑰中的哪一個用於傳輸封包編碼。"
+
+#. i18n: file configcrypto.ui line 284
+#: rc.cpp:78
+#, no-c-format
+msgid "Key 1"
+msgstr "金鑰 1"
+
+#. i18n: file configcrypto.ui line 289
+#: rc.cpp:81
+#, no-c-format
+msgid "Key 2"
+msgstr "金鑰 2"
+
+#. i18n: file configcrypto.ui line 294
+#: rc.cpp:84
+#, no-c-format
+msgid "Key 3"
+msgstr "金鑰 3"
+
+#. i18n: file configcrypto.ui line 299
+#: rc.cpp:87
+#, no-c-format
+msgid "Key 4"
+msgstr "金鑰 4"
+
+#. i18n: file configpower.ui line 27
+#: rc.cpp:90
+#, no-c-format
+msgid "Sleep timeout:"
+msgstr "睡眠時間："
+
+#. i18n: file configpower.ui line 30
+#: rc.cpp:93
+#, no-c-format
+msgid ""
+"Sets how long the card will be offline before looking for new packages again."
+msgstr "設定網卡在尋找新的 package 前要離線多久。"
+
+#. i18n: file configpower.ui line 55
+#: rc.cpp:96 rc.cpp:129
+#, no-c-format
+msgid " sec"
+msgstr " 秒"
+
+#. i18n: file configpower.ui line 63
+#: rc.cpp:99
+#, no-c-format
+msgid "Wakeup period:"
+msgstr "醒來時間："
+
+#. i18n: file configpower.ui line 66
+#: rc.cpp:102
+#, no-c-format
+msgid ""
+"Sets how long the card will be online and looking for new packages before it "
+"falls asleep."
+msgstr "設定網卡要尋找新的 package 時要上線多久才又進入睡眠狀態。"
+
+#. i18n: file configpower.ui line 74
+#: rc.cpp:105
+#, no-c-format
+msgid "Receive Packets"
+msgstr "接收封包"
+
+#. i18n: file configpower.ui line 77
+#: rc.cpp:108
+#, no-c-format
+msgid "Sets which sort of packets to listen to."
+msgstr "設定要監聽哪一種封包。"
+
+#. i18n: file configpower.ui line 88
+#: rc.cpp:111
+#, no-c-format
+msgid "All"
+msgstr "所有的"
+
+#. i18n: file configpower.ui line 91
+#: rc.cpp:114
+#, no-c-format
+msgid "Listen to all packet types."
+msgstr "監聽所有的封包型態。"
+
+#. i18n: file configpower.ui line 99
+#: rc.cpp:117
+#, no-c-format
+msgid "Unicast only"
+msgstr "只監聽 Unicast 封包"
+
+#. i18n: file configpower.ui line 102
+#: rc.cpp:120
+#, no-c-format
+msgid "Listen to Unicast packets only."
+msgstr "只監聽 Unicast 封包。"
+
+#. i18n: file configpower.ui line 110
+#: rc.cpp:123
+#, no-c-format
+msgid "Multicast/Broadcast only"
+msgstr "只監聽 Multicast/廣播封包"
+
+#. i18n: file configpower.ui line 113
+#: rc.cpp:126
+#, no-c-format
+msgid "Listen to Multicast and Broadcast packets only."
+msgstr "只監聽 Multicast/廣播封包。"
+
+#. i18n: file ifconfigpagebase.ui line 32
+#: rc.cpp:132
+#, no-c-format
+msgid "Network name:"
+msgstr "網路名稱："
+
+#. i18n: file ifconfigpagebase.ui line 35
+#: rc.cpp:135 rc.cpp:141
+#, no-c-format
+msgid ""
+"SSID of the network to connect to. \"any\" means \"arbitrary available "
+"network\"."
+msgstr "要連接到的網路的 SSID。「任何」意指「任何可用的網路」。"
+
+#. i18n: file ifconfigpagebase.ui line 48
+#: rc.cpp:138
+#, no-c-format
+msgid "Interface:"
+msgstr "介面："
+
+#. i18n: file ifconfigpagebase.ui line 67
+#: rc.cpp:144
+#, no-c-format
+msgid "Autodetect"
+msgstr "自動偵測"
+
+#. i18n: file ifconfigpagebase.ui line 105
+#: rc.cpp:147
+#, no-c-format
+msgid "Script:"
+msgstr "文稿："
+
+#. i18n: file ifconfigpagebase.ui line 108
+#: rc.cpp:150
+#, no-c-format
+msgid ""
+"Command to perform after the connection is established, e.g. for obtaining a "
+"DHCP lease."
+msgstr "連線建立後要執行的指令，例如：要求取得 IP。"
+
+#. i18n: file ifconfigpagebase.ui line 151
+#: rc.cpp:153
+#, no-c-format
+msgid "Enable power management"
+msgstr "開啟電源管理"
+
+#. i18n: file ifconfigpagebase.ui line 154
+#: rc.cpp:156
+#, no-c-format
+msgid "Enables advanced power management settings."
+msgstr "開啟進階電源管理設定。"
+
+#. i18n: file ifconfigpagebase.ui line 165
+#: rc.cpp:159 rc.cpp:243
+#, no-c-format
+msgid "Configure..."
+msgstr "設定..."
+
+#. i18n: file ifconfigpagebase.ui line 168
+#: rc.cpp:162
+#, no-c-format
+msgid "Clicking this button opens the Power Management menu."
+msgstr "點選此鍵會開啟電源管理目錄。"
+
+#. i18n: file ifconfigpagebase.ui line 203
+#: rc.cpp:165
+#, no-c-format
+msgid "Speed:"
+msgstr "速度："
+
+#. i18n: file ifconfigpagebase.ui line 206
+#: rc.cpp:168
+#, no-c-format
+msgid "Sets the connection speed. Not all cards support this."
+msgstr "設定連線速度。不是所有的網卡都有支援此功能。"
+
+#. i18n: file ifconfigpagebase.ui line 212
+#: rc.cpp:171
+#, no-c-format
+msgid "Auto"
+msgstr "自動"
+
+#. i18n: file ifconfigpagebase.ui line 217
+#: rc.cpp:174
+#, no-c-format
+msgid "1 Mb/s"
+msgstr "1 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 222
+#: rc.cpp:177
+#, no-c-format
+msgid "2 Mb/s"
+msgstr "2 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 227
+#: rc.cpp:180
+#, no-c-format
+msgid "5.5 Mb/s"
+msgstr "5.5 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 232
+#: rc.cpp:183
+#, no-c-format
+msgid "6 Mb/s"
+msgstr "6 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 237
+#: rc.cpp:186
+#, no-c-format
+msgid "9 Mb/s"
+msgstr "9 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 242
+#: rc.cpp:189
+#, no-c-format
+msgid "11 Mb/s"
+msgstr "11 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 247
+#: rc.cpp:192
+#, no-c-format
+msgid "12 Mb/s"
+msgstr "12 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 252
+#: rc.cpp:195
+#, no-c-format
+msgid "18 Mb/s"
+msgstr "18 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 257
+#: rc.cpp:198
+#, no-c-format
+msgid "24 Mb/s"
+msgstr "24 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 262
+#: rc.cpp:201
+#, no-c-format
+msgid "36 Mb/s"
+msgstr "36 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 267
+#: rc.cpp:204
+#, no-c-format
+msgid "48 Mb/s"
+msgstr "48 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 272
+#: rc.cpp:207
+#, no-c-format
+msgid "54 Mb/s"
+msgstr "54 Mb/s"
+
+#. i18n: file ifconfigpagebase.ui line 311
+#: rc.cpp:210
+#, no-c-format
+msgid "Operation mode:"
+msgstr "運作模式："
+
+#. i18n: file ifconfigpagebase.ui line 314
+#: rc.cpp:213
+#, no-c-format
+msgid ""
+"Operation mode of the card. For standard infrastructure networks, \"Managed\" "
+"is appropriate."
+msgstr "網卡的運作模式。對標準的基礎網路來說，「管理」模式是最適當的。"
+
+#. i18n: file ifconfigpagebase.ui line 320
+#: rc.cpp:216
+#, no-c-format
+msgid "Ad-Hoc"
+msgstr "Ad-Hoc"
+
+#. i18n: file ifconfigpagebase.ui line 325
+#: rc.cpp:219
+#, no-c-format
+msgid "Managed"
+msgstr "管理(Managed)"
+
+#. i18n: file ifconfigpagebase.ui line 330
+#: rc.cpp:222
+#, no-c-format
+msgid "Repeater"
+msgstr "重複(Repeater)"
+
+#. i18n: file ifconfigpagebase.ui line 335
+#: rc.cpp:225
+#, no-c-format
+msgid "Master"
+msgstr "主權(Master)"
+
+#. i18n: file ifconfigpagebase.ui line 340
+#: rc.cpp:228
+#, no-c-format
+msgid "Secondary"
+msgstr "次要(Secondary)"
+
+#. i18n: file ifconfigpagebase.ui line 379
+#: rc.cpp:231
+#, no-c-format
+msgid "Execute script on connect"
+msgstr "連線時執行文稿"
+
+#. i18n: file ifconfigpagebase.ui line 382
+#: rc.cpp:234
+#, no-c-format
+msgid ""
+"Activates a script to perform arbitrary operations after associating with the "
+"network."
+msgstr "與網路連接上以後，啟動文稿以執行命令。"
+
+#. i18n: file ifconfigpagebase.ui line 417
+#: rc.cpp:237
+#, no-c-format
+msgid "Use encryption"
+msgstr "使用編碼"
+
+#. i18n: file ifconfigpagebase.ui line 420
+#: rc.cpp:240
+#, no-c-format
+msgid "Enables WEP encryption."
+msgstr "開啟 WEP 編碼。"
+
+#. i18n: file ifconfigpagebase.ui line 434
+#: rc.cpp:246
+#, no-c-format
+msgid "Clicking this button opens the Encryption menu."
+msgstr "點選此鍵會開啟編碼目錄。"
+
+#. i18n: file mainconfigbase.ui line 24
+#: rc.cpp:249
+#, no-c-format
+msgid "General Settings"
+msgstr "一般設定"
+
+#. i18n: file mainconfigbase.ui line 35
+#: rc.cpp:252
+#, no-c-format
+msgid "&Activate"
+msgstr "啟動(&A)"
+
+#. i18n: file mainconfigbase.ui line 38
+#: rc.cpp:255
+#, no-c-format
+msgid "Applies the configuration to the interface."
+msgstr "將設定套用至介面。"
+
+#. i18n: file mainconfigbase.ui line 63
+#: rc.cpp:258
+#, no-c-format
+msgid "Number of configurations:"
+msgstr "設定數量："
+
+#. i18n: file mainconfigbase.ui line 66
+#: rc.cpp:261
+#, no-c-format
+msgid "Modifies the number of configurations that this tool should provide."
+msgstr "改變此工具應提供的設定數量。"
+
+#. i18n: file mainconfigbase.ui line 74
+#: rc.cpp:264 rc.cpp:270
+#, no-c-format
+msgid "Selects which of the configurations is to be applied."
+msgstr "選擇要套用哪一種設定。"
+
+#. i18n: file mainconfigbase.ui line 104
+#: rc.cpp:267
+#, no-c-format
+msgid "Configuration to load:"
+msgstr "要載入的設定："
+
+#. i18n: file mainconfigbase.ui line 149
+#: rc.cpp:273
+#, no-c-format
+msgid "Load preset &configuration on startup"
+msgstr "啟動時載入預先定義好的設定(&C)"
+
+#. i18n: file mainconfigbase.ui line 152
+#: rc.cpp:276
+#, no-c-format
+msgid ""
+"When this box is checked, your settings are applied when you launch the Control "
+"Center module."
+msgstr "開啟此選項的話，您呼叫控制中心模組時，就會套用您的設定。"
+
+#: wificonfig.cpp:239 wificonfig.cpp:261 wificonfig.cpp:280
+msgid "Unable to autodetect wireless interface."
+msgstr "無法偵測到無線網卡介面。"
+
+#~ msgid "IfConfigPageBase"
+#~ msgstr "IfConfigPageBase"