summaryrefslogtreecommitdiffstats
path: root/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po
diff options
context:
space:
mode:
Diffstat (limited to 'tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po')
-rw-r--r--tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po722
1 files changed, 722 insertions, 0 deletions
diff --git a/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po b/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po
new file mode 100644
index 00000000000..6ac3c3b8116
--- /dev/null
+++ b/tde-i18n-zh_TW/messages/tdeutils/kcmlirc.po
@@ -0,0 +1,722 @@
+# translation of kcmlirc.po to Traditional Chinese
+# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: kcmlirc\n"
+"POT-Creation-Date: 2008-07-08 01:19+0200\n"
+"PO-Revision-Date: 2006-02-13 11:12+0800\n"
+"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
+"dot tw>\n"
+"Language-Team: Traditional Chinese <zh_l10n@linux.org.tw>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: _translatorinfo.cpp:1
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr "Frank Weng (a.k.a. Franklin)"
+
+#: _translatorinfo.cpp:3
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr "franklin at goodhorse dot idv dot tw"
+
+#: addaction.cpp:99
+msgid ""
+"You did not select a mode of that remote control. Please use %1, or revert back "
+"to select a different mode."
+msgstr "您尚未選取遙控模式。請使用 %1,或是退回重新選擇不同的模式。"
+
+#: addaction.cpp:101
+msgid "Incorrect Remote Control Detected"
+msgstr "偵測到不正確的遙控。"
+
+#: addaction.cpp:231
+msgid "<anonymous>"
+msgstr "<匿名>"
+
+#: addaction.cpp:343
+msgid "anonymous"
+msgstr "匿名"
+
+#: editaction.cpp:65 editaction.cpp:108 kcmlirc.cpp:132
+msgid "[Exit current mode]"
+msgstr "【離開目前的模式】"
+
+#: kcmlirc.cpp:55
+msgid "KDE Lirc"
+msgstr "KDE Lirc"
+
+#: kcmlirc.cpp:55
+msgid "The KDE IR Remote Control System"
+msgstr "KDE 紅外線遙控系統"
+
+#: kcmlirc.cpp:55
+msgid ""
+"Use this to configure KDE's infrared remote control system in order to control "
+"any KDE application with your infrared remote control."
+msgstr "用這個來設定 KDE 的紅外線遙控系統。"
+
+#: kcmlirc.cpp:57
+msgid ""
+"<h1>Remote Controls</h1>"
+"<p>This module allows you to configure bindings between your remote controls "
+"and KDE applications. Simply select your remote control and click Add under the "
+"Actions/Buttons list. If you want KDE to attempt to automatically assign "
+"buttons to a supported application's actions, try clicking the Auto-Populate "
+"button.</p>"
+"<p>To view the recognised applications and remote controls, simply select the "
+"<em>Loaded Extensions</em> tab.</p>"
+msgstr ""
+"<h1>遙控</h1>"
+"<p>這個模組讓您可以設定您的遙控按鍵與 KDE 應用程式之間的關聯。只要按下您要的按鍵,並點選「動作/按鈕清單」中的「加入」鍵即可。如果您要讓 KDE "
+"自動分配按鍵給已支援的應用程式,試著點選「自動分配」鍵。</p> "
+"<p>要顯示已加入遙控的應用程式,請選擇<em>載入的延伸程式</em>頁。,/p>"
+
+#: kcmlirc.cpp:61
+msgid ""
+"The Infrared Remote Control software is not currently running. This "
+"configuration module will not work properly without it. Would you like to start "
+"it now?"
+msgstr "紅外線遙控軟體尚未執行中,如此這個設定無法正確運作。您要啟動它嗎?"
+
+#: kcmlirc.cpp:61
+msgid "Software Not Running"
+msgstr "軟體未啟動"
+
+#: kcmlirc.cpp:61
+msgid "Start"
+msgstr "請啟動它"
+
+#: kcmlirc.cpp:61 kcmlirc.cpp:66
+msgid "Do Not Start"
+msgstr "不要啟動"
+
+#: kcmlirc.cpp:66
+msgid ""
+"Would you like the infrared remote control software to start automatically when "
+"you begin KDE?"
+msgstr "您要在 KDE 開始時自動啟動紅外線遙控軟體嗎?"
+
+#: kcmlirc.cpp:66
+msgid "Automatically Start?"
+msgstr "要自動啟動嗎?"
+
+#: kcmlirc.cpp:66
+msgid "Start Automatically"
+msgstr "要"
+
+#: kcmlirc.cpp:335
+msgid "Are you sure you want to remove %1 and all its actions?"
+msgstr "您確定要移除 %1 及它所有關聯的動作?"
+
+#: kcmlirc.cpp:335
+msgid "Erase Actions?"
+msgstr "移除動作?"
+
+#: kcmlirc.cpp:357
+msgid ""
+"You may only drag the selected items onto a mode of the same remote control"
+msgstr "您只能將選擇的元件拖曳到同一個遙控系統下的其他模式。"
+
+#: kcmlirc.cpp:357
+msgid "You May Not Drag Here"
+msgstr "無法拖曳到這裡"
+
+#: kcmlirc.cpp:379
+msgid "Actions <i>always</i> available"
+msgstr "動作可以在<i>所有的模式</i>下使用。"
+
+#: kcmlirc.cpp:379
+msgid "Actions available only in mode <b>%1</b>"
+msgstr "動作只能在模式<b>%1</b>下使用。"
+
+#. i18n: file addactionbase.ui line 94
+#: kcmlirc.cpp:440 kcmlirc.cpp:470 kcmlirc.cpp:475 rc.cpp:12
+#, no-c-format
+msgid "Applications"
+msgstr "應用程式"
+
+#. i18n: file newmode.ui line 25
+#: kcmlirc.cpp:449 kcmlirc.cpp:472 kcmlirc.cpp:485 rc.cpp:336
+#, no-c-format
+msgid "Remote Controls"
+msgstr "遙控鍵"
+
+#: kcmlirc.cpp:469 kcmlirc.cpp:483 kcmlirc.cpp:493
+msgid "Information on <b>%1</b>:"
+msgstr "<b>%1</b>的資訊:"
+
+#: kcmlirc.cpp:471
+msgid "Number of Applications"
+msgstr "應用程式數量"
+
+#: kcmlirc.cpp:473
+msgid "Number of Remote Controls"
+msgstr "遙控鍵數量"
+
+#: kcmlirc.cpp:479 kcmlirc.cpp:489
+msgid "Extension Name"
+msgstr "延伸程式名稱"
+
+#: kcmlirc.cpp:480 kcmlirc.cpp:490
+msgid "Extension Author"
+msgstr "延伸程式作者"
+
+#: kcmlirc.cpp:481
+msgid "Application Identifier"
+msgstr "應用程式代碼"
+
+#: kcmlirc.cpp:482
+msgid "Number of Actions"
+msgstr "動作數量"
+
+#: kcmlirc.cpp:491
+msgid "Remote Control Identifier"
+msgstr "遙控代碼"
+
+#: kcmlirc.cpp:492
+msgid "Number of Buttons"
+msgstr "按鍵數量"
+
+#. i18n: file addactionbase.ui line 17
+#: rc.cpp:3
+#, no-c-format
+msgid "Add Action"
+msgstr "新增動作"
+
+#. i18n: file addactionbase.ui line 24
+#: rc.cpp:6
+#, no-c-format
+msgid "Select Action to Carry Out on Button Press"
+msgstr "選擇此按鍵按下後要執行的動作"
+
+#. i18n: file addactionbase.ui line 60
+#: rc.cpp:9
+#, no-c-format
+msgid "I wish to select an &application below for usage:"
+msgstr "我希望選擇以下的應用程式之一(&A):"
+
+#. i18n: file addactionbase.ui line 159
+#: rc.cpp:15
+#, no-c-format
+msgid "I wish to manually select a &function from a running program"
+msgstr "我希望手動選擇要執行的程式功能(&F)"
+
+#. i18n: file addactionbase.ui line 184
+#: rc.cpp:18
+#, no-c-format
+msgid "I wish to change the remote control's &mode"
+msgstr "我希望變更遙控模式(&M)"
+
+#. i18n: file addactionbase.ui line 213
+#: rc.cpp:21
+#, no-c-format
+msgid "Select Button to Configure"
+msgstr "選擇要設定的按鍵"
+
+#. i18n: file addactionbase.ui line 224
+#: rc.cpp:24
+#, no-c-format
+msgid ""
+"You are attempting to configure an action for a button on [remote] (in mode "
+"[mode]). Press a button on this remote control or select from the list."
+msgstr "您決定設定某一遙控按鍵的動作(在模式 [mode] 下)。請按下此按鍵,或是從清單中選擇。"
+
+#. i18n: file addactionbase.ui line 258
+#: rc.cpp:27 rc.cpp:294
+#, no-c-format
+msgid "Button"
+msgstr "按鍵"
+
+#. i18n: file addactionbase.ui line 308
+#: rc.cpp:30 rc.cpp:69
+#, no-c-format
+msgid "Select Program Function"
+msgstr "選擇程式功能"
+
+#. i18n: file addactionbase.ui line 324
+#: rc.cpp:33 rc.cpp:297
+#, no-c-format
+msgid "Program"
+msgstr "程式"
+
+#. i18n: file addactionbase.ui line 335
+#: rc.cpp:36
+#, no-c-format
+msgid "IR Kick"
+msgstr "IR Kick"
+
+#. i18n: file addactionbase.ui line 343
+#: rc.cpp:39
+#, no-c-format
+msgid "Xine"
+msgstr "Xine"
+
+#. i18n: file addactionbase.ui line 351
+#: rc.cpp:42 rc.cpp:45
+#, no-c-format
+msgid "kicker"
+msgstr "kicker"
+
+#. i18n: file addactionbase.ui line 367
+#: rc.cpp:48 rc.cpp:57
+#, no-c-format
+msgid "noatun"
+msgstr "noatun"
+
+#. i18n: file addactionbase.ui line 374
+#: rc.cpp:51
+#, no-c-format
+msgid "Marquis"
+msgstr "Marquis"
+
+#. i18n: file addactionbase.ui line 382
+#: rc.cpp:54
+#, no-c-format
+msgid "Noatun"
+msgstr "Noatun"
+
+#. i18n: file addactionbase.ui line 429
+#: rc.cpp:60 rc.cpp:75 rc.cpp:159 rc.cpp:300
+#, no-c-format
+msgid "Function"
+msgstr "功能"
+
+#. i18n: file addactionbase.ui line 440
+#: rc.cpp:63
+#, no-c-format
+msgid "Parameter"
+msgstr "參數"
+
+#. i18n: file addactionbase.ui line 451
+#: rc.cpp:66
+#, no-c-format
+msgid "Prototype"
+msgstr "原型"
+
+#. i18n: file addactionbase.ui line 507
+#: rc.cpp:72
+#, no-c-format
+msgid "&Perform a function in the application:"
+msgstr "執行應用程式中的功能(&P):"
+
+#. i18n: file addactionbase.ui line 563
+#: rc.cpp:81
+#, no-c-format
+msgid "Description"
+msgstr "描述"
+
+#. i18n: file addactionbase.ui line 594
+#: rc.cpp:84
+#, no-c-format
+msgid "&Just start the application. Do not do anything else."
+msgstr "只要啟動應用程式,不做任何其他動作(&J)。"
+
+#. i18n: file addactionbase.ui line 623
+#: rc.cpp:87
+#, no-c-format
+msgid "Populate Parameters"
+msgstr "分配參數"
+
+#. i18n: file addactionbase.ui line 632
+#: rc.cpp:90
+#, no-c-format
+msgid "Option Description"
+msgstr "選項描述"
+
+#. i18n: file addactionbase.ui line 643
+#: rc.cpp:93
+#, no-c-format
+msgid "Value"
+msgstr "值"
+
+#. i18n: file addactionbase.ui line 654
+#: rc.cpp:96
+#, no-c-format
+msgid "Type"
+msgstr "型態"
+
+#. i18n: file addactionbase.ui line 665
+#: rc.cpp:99
+#, no-c-format
+msgid "Place"
+msgstr "地方"
+
+#. i18n: file addactionbase.ui line 727
+#: rc.cpp:102
+#, no-c-format
+msgid "Parameter:"
+msgstr "參數:"
+
+#. i18n: file addactionbase.ui line 976
+#: rc.cpp:105
+#, no-c-format
+msgid "Finishing Up"
+msgstr "結束"
+
+#. i18n: file addactionbase.ui line 992
+#: rc.cpp:108
+#, no-c-format
+msgid "Miscellaneous Options"
+msgstr "其他選項"
+
+#. i18n: file addactionbase.ui line 1014
+#: rc.cpp:111
+#, no-c-format
+msgid "This action is &repeatable if the button is held down"
+msgstr "這個動作在按鍵持續按住的狀況下會重複執行(&R)"
+
+#. i18n: file addactionbase.ui line 1022
+#: rc.cpp:114
+#, no-c-format
+msgid "This action causes the application to &start if not already running"
+msgstr "這個動作會偵測此應用程式是否已啟動。如果未啟動的話就會幫它啟動(&S)"
+
+#. i18n: file addactionbase.ui line 1058
+#: rc.cpp:117 rc.cpp:213
+#, no-c-format
+msgid "Multiple Instances"
+msgstr "多個實體"
+
+#. i18n: file addactionbase.ui line 1086
+#: rc.cpp:120 rc.cpp:216
+#, no-c-format
+msgid ""
+"This application may have multiple instances. In the case of having multiple "
+"instances at once when this action should be executed, choose a course of "
+"action:"
+msgstr "這個應用程式可能有多個實體。請選擇您要將動作送到哪個實體:"
+
+#. i18n: file addactionbase.ui line 1123
+#: rc.cpp:123 rc.cpp:219
+#, no-c-format
+msgid "&Ignore the action"
+msgstr "忽略此動作(&I)"
+
+#. i18n: file addactionbase.ui line 1137
+#: rc.cpp:126
+#, no-c-format
+msgid "Send the action to the instance hi&ghest in the window stacking order"
+msgstr "送出動作到視窗堆疊中最高的實體(&L)"
+
+#. i18n: file addactionbase.ui line 1148
+#: rc.cpp:129 rc.cpp:225
+#, no-c-format
+msgid "Send the action to the instance &lowest in window stacking order"
+msgstr "送出動作到視窗堆疊中最低的實體(&L)"
+
+#. i18n: file addactionbase.ui line 1159
+#: rc.cpp:132
+#, no-c-format
+msgid "Send the action to &all instances"
+msgstr "送出動作到所有的實體(&A)"
+
+#. i18n: file addactionbase.ui line 1188
+#: rc.cpp:135
+#, no-c-format
+msgid "Select Required Mode Change"
+msgstr "選擇要更換的模式"
+
+#. i18n: file addactionbase.ui line 1216
+#: rc.cpp:138
+#, no-c-format
+msgid "&Switch to mode:"
+msgstr "切換到模式(&S):"
+
+#. i18n: file addactionbase.ui line 1247
+#: rc.cpp:141
+#, no-c-format
+msgid "Mode"
+msgstr "模式"
+
+#. i18n: file addactionbase.ui line 1295
+#: rc.cpp:144
+#, no-c-format
+msgid "&Exit current mode"
+msgstr "離開目前的模式(&E)"
+
+#. i18n: file addactionbase.ui line 1323
+#: rc.cpp:147
+#, no-c-format
+msgid "<b>Options</b>"
+msgstr "<b>選項</b>"
+
+#. i18n: file addactionbase.ui line 1345
+#: rc.cpp:150 rc.cpp:207
+#, no-c-format
+msgid "E&xecute all other actions before mode change (in original mode)"
+msgstr "在模式更換前在原模式中執行所有其他的動作(&X)"
+
+#. i18n: file addactionbase.ui line 1356
+#: rc.cpp:153 rc.cpp:210
+#, no-c-format
+msgid "Exec&ute all actions after mode change (in new mode)"
+msgstr "更換模式後在新模式中執行所有的動作(&U)"
+
+#. i18n: file editactionbase.ui line 16
+#: rc.cpp:156
+#, no-c-format
+msgid "Edit Action"
+msgstr "編輯動作"
+
+#. i18n: file editactionbase.ui line 89
+#: rc.cpp:162
+#, no-c-format
+msgid "O&bject:"
+msgstr "物件(&B):"
+
+#. i18n: file editactionbase.ui line 125
+#: rc.cpp:165
+#, no-c-format
+msgid "&Perform function:"
+msgstr "執行功能(&P):"
+
+#. i18n: file editactionbase.ui line 149
+#: rc.cpp:168
+#, no-c-format
+msgid "Just start application"
+msgstr "只要啟動應用程式"
+
+#. i18n: file editactionbase.ui line 162
+#: rc.cpp:171
+#, no-c-format
+msgid "Fu&nction:"
+msgstr "功能(&N):"
+
+#. i18n: file editactionbase.ui line 173
+#: rc.cpp:174
+#, no-c-format
+msgid "&Application:"
+msgstr "應用程式(&A):"
+
+#. i18n: file editactionbase.ui line 205
+#: rc.cpp:177
+#, no-c-format
+msgid "&Use application:"
+msgstr "使用應用程式(&U):"
+
+#. i18n: file editactionbase.ui line 219
+#: rc.cpp:180
+#, no-c-format
+msgid "App&lication:"
+msgstr "應用程式(&L):"
+
+#. i18n: file editactionbase.ui line 230
+#: rc.cpp:183
+#, no-c-format
+msgid "Use &DCOP:"
+msgstr "使用 DCOP(&D):"
+
+#. i18n: file editactionbase.ui line 518
+#: rc.cpp:186
+#, no-c-format
+msgid "A&pplication/DCOP options:"
+msgstr "應用程式/DCOP 選項(&P):"
+
+#. i18n: file editactionbase.ui line 556
+#: rc.cpp:189
+#, no-c-format
+msgid "Change &mode to:"
+msgstr "更換模式到(&M):"
+
+#. i18n: file editactionbase.ui line 614
+#: rc.cpp:195
+#, no-c-format
+msgid "<b>DCOP/Application Action Options</b>"
+msgstr "<b>DCOP/應用程式動作選項</b>"
+
+#. i18n: file editactionbase.ui line 636
+#: rc.cpp:198
+#, no-c-format
+msgid "&Action repeats if button is held down"
+msgstr "按鍵按住的話就重複動作(&A)"
+
+#. i18n: file editactionbase.ui line 644
+#: rc.cpp:201
+#, no-c-format
+msgid "&Start program/service if not already running"
+msgstr "如果未執行的話就啟動程式或服務(&S)"
+
+#. i18n: file editactionbase.ui line 669
+#: rc.cpp:204
+#, no-c-format
+msgid "<b>Mode Change Options</b>"
+msgstr "<b>模式更換選項</b>"
+
+#. i18n: file editactionbase.ui line 820
+#: rc.cpp:222
+#, no-c-format
+msgid "Send the action to the instance hi&ghest in window stacking order"
+msgstr "送出此動作到視窗堆疊中最高的實體(&G)"
+
+#. i18n: file editactionbase.ui line 842
+#: rc.cpp:228
+#, no-c-format
+msgid "Send the action to all i&nstances"
+msgstr "送出所有實體的動作(&N)"
+
+#. i18n: file editactionbase.ui line 889
+#: rc.cpp:234
+#, no-c-format
+msgid "F1"
+msgstr "F1"
+
+#. i18n: file editmodebase.ui line 16
+#: rc.cpp:243
+#, no-c-format
+msgid "Edit Mode"
+msgstr "編輯模式"
+
+#. i18n: file editmodebase.ui line 27
+#: rc.cpp:246
+#, no-c-format
+msgid "<b>Description</b>"
+msgstr "<b>描述</b>"
+
+#. i18n: file editmodebase.ui line 57
+#: rc.cpp:249
+#, no-c-format
+msgid "&Icon for system tray:"
+msgstr "系統匣圖示(&I):"
+
+#. i18n: file editmodebase.ui line 130
+#: rc.cpp:252
+#, no-c-format
+msgid "&Mode name:"
+msgstr "模式名稱(&M):"
+
+#. i18n: file editmodebase.ui line 160
+#: rc.cpp:255
+#, no-c-format
+msgid "<b>Behavior</b>"
+msgstr "<b>行為</b>"
+
+#. i18n: file editmodebase.ui line 182
+#: rc.cpp:258
+#, no-c-format
+msgid "Mo&de is the default for its remote control"
+msgstr "Mode 為它的遙控預設模式。"
+
+#. i18n: file kcmlircbase.ui line 17
+#: rc.cpp:267
+#, no-c-format
+msgid "Linux Infrared Remote Control"
+msgstr "Linux 紅外線遙控"
+
+#. i18n: file kcmlircbase.ui line 38
+#: rc.cpp:270
+#, no-c-format
+msgid "Controller Functions"
+msgstr "控制功能"
+
+#. i18n: file kcmlircbase.ui line 75
+#: rc.cpp:273
+#, no-c-format
+msgid ""
+"There are currently no remote controls available. You must first set up LIRC "
+"correctly; see www.lirc.org for more information."
+msgstr "目前沒有遙控系統。您必須先設定 LIRC,請參考 www.lirc.org 的說明。"
+
+#. i18n: file kcmlircbase.ui line 104
+#: rc.cpp:276
+#, no-c-format
+msgid "Remote controls and modes:"
+msgstr "遙控鍵與模式:"
+
+#. i18n: file kcmlircbase.ui line 110
+#: rc.cpp:279 rc.cpp:282
+#, no-c-format
+msgid "New Column"
+msgstr "新欄位"
+
+#. i18n: file kcmlircbase.ui line 176
+#: rc.cpp:285
+#, no-c-format
+msgid "&Add..."
+msgstr "新增(&A)..."
+
+#. i18n: file kcmlircbase.ui line 187
+#: rc.cpp:288
+#, no-c-format
+msgid "&Edit..."
+msgstr "編輯(&E)..."
+
+#. i18n: file kcmlircbase.ui line 271
+#: rc.cpp:306
+#, no-c-format
+msgid "Notes"
+msgstr "備註"
+
+#. i18n: file kcmlircbase.ui line 342
+#: rc.cpp:309
+#, no-c-format
+msgid "Auto-Populate..."
+msgstr "自動分配..."
+
+#. i18n: file kcmlircbase.ui line 356
+#: rc.cpp:312
+#, no-c-format
+msgid "A&dd..."
+msgstr "新增(&D)..."
+
+#. i18n: file kcmlircbase.ui line 367
+#: rc.cpp:315
+#, no-c-format
+msgid "Ed&it..."
+msgstr "編輯(&I)..."
+
+#. i18n: file kcmlircbase.ui line 378
+#: rc.cpp:318
+#, no-c-format
+msgid "Re&move"
+msgstr "移除(&M)"
+
+#. i18n: file kcmlircbase.ui line 395
+#: rc.cpp:321
+#, no-c-format
+msgid "Loaded Extensions"
+msgstr "載入的延伸程式"
+
+#. i18n: file kcmlircbase.ui line 411
+#: rc.cpp:324 rc.cpp:327
+#, no-c-format
+msgid "Name"
+msgstr "名稱"
+
+#. i18n: file newmode.ui line 16
+#: rc.cpp:333
+#, no-c-format
+msgid "New Mode"
+msgstr "新模式"
+
+#. i18n: file newmode.ui line 54
+#: rc.cpp:339
+#, no-c-format
+msgid "Name:"
+msgstr "名稱:"
+
+#. i18n: file selectprofile.ui line 16
+#: rc.cpp:348
+#, no-c-format
+msgid "Select Profile to Add"
+msgstr "選擇要加入的設定檔"
+
+#. i18n: file selectprofile.ui line 25
+#: rc.cpp:351
+#, no-c-format
+msgid "Profile Name"
+msgstr "設定檔名稱"
+
+#: kcmlircbase.ui.h:27
+msgid "Remote Control"
+msgstr "遙控"
+
+#: kcmlircbase.ui.h:29
+msgid "Icon"
+msgstr "圖示"