From c07eaee016c4aea75479b3ced278b374766ee7aa Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Mon, 10 Dec 2018 01:34:35 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. (cherry picked from commit acce1cac9da4c796fa034a9839a1533c94251235) --- tde-i18n-az/messages/tdebase/tdefontinst.po | 182 +++++++++++++++------------- 1 file changed, 99 insertions(+), 83 deletions(-) (limited to 'tde-i18n-az/messages/tdebase') diff --git a/tde-i18n-az/messages/tdebase/tdefontinst.po b/tde-i18n-az/messages/tdebase/tdefontinst.po index 4c43357194a..0530e27cc12 100644 --- a/tde-i18n-az/messages/tdebase/tdefontinst.po +++ b/tde-i18n-az/messages/tdebase/tdefontinst.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: tdefontinst\n" -"POT-Creation-Date: 2014-09-29 12:05-0500\n" +"POT-Creation-Date: 2018-12-06 21:53+0100\n" "PO-Revision-Date: 2004-01-05 20:47+0200\n" "Last-Translator: Mətin Əmirov \n" "Language-Team: Azerbaijani Turkish \n" @@ -15,6 +15,18 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "" + #: kcmfontinst/KCmFontInst.cpp:88 msgid "TDE Font Installer" msgstr "TDE Yazı Növü Qurucusu" @@ -36,9 +48,8 @@ msgstr "Yazı Növü Əlavə Et..." #: kcmfontinst/KCmFontInst.cpp:173 msgid "" -"The fonts shown are your personal fonts." -"
To see (and install) system-wide fonts, click on the \"Administrator Mode\" " -"button below." +"The fonts shown are your personal fonts.
To see (and install) " +"system-wide fonts, click on the \"Administrator Mode\" button below." msgstr "" #: kcmfontinst/KCmFontInst.cpp:214 @@ -55,24 +66,23 @@ msgstr "" #: kcmfontinst/KCmFontInst.cpp:318 msgid "" -"

Font Installer

" -"

This module allows you to install TrueType, Type1, and Bitmap fonts.

" -"

You may also install fonts using Konqueror: type fonts:/ into Konqueror's " -"location bar and this will display your installed fonts. To install a font, " -"simply copy one into the folder.

" +"

Font Installer

This module allows you to install TrueType, " +"Type1, and Bitmap fonts.

You may also install fonts using Konqueror: " +"type fonts:/ into Konqueror's location bar and this will display your " +"installed fonts. To install a font, simply copy one into the folder.

" msgstr "" #: kcmfontinst/KCmFontInst.cpp:325 msgid "" -"

Font Installer

" -"

This module allows you to install TrueType, Type1, and Bitmap fonts.

" -"

You may also install fonts using Konqueror: type fonts:/ into Konqueror's " -"location bar and this will display your installed fonts. To install a font, " -"simply copy it into the appropriate folder - \"Personal\" for fonts available " -"to just yourself, or \"System\" for system-wide fonts (available to all).

" -"

NOTE: As you are not logged in as \"root\", any fonts installed will " -"only be available to you. To install fonts system-wide, use the \"Administrator " -"Mode\" button to run this module as \"root\".

" +"

Font Installer

This module allows you to install TrueType, " +"Type1, and Bitmap fonts.

You may also install fonts using Konqueror: " +"type fonts:/ into Konqueror's location bar and this will display your " +"installed fonts. To install a font, simply copy it into the appropriate " +"folder - \"Personal\" for fonts available to just yourself, or \"System\" " +"for system-wide fonts (available to all).

NOTE: As you are not " +"logged in as \"root\", any fonts installed will only be available to you. To " +"install fonts system-wide, use the \"Administrator Mode\" button to run this " +"module as \"root\".

" msgstr "" #: kcmfontinst/KCmFontInst.cpp:422 @@ -146,16 +156,15 @@ msgstr "%n Qovluq" #: kcmfontinst/KCmFontInst.cpp:612 msgid "" "

Please note that any open applications will need to be restarted in order " -"for any changes to be noticed." -"

" -"

(You will also have to restart this application in order to use its print " -"function on any newly installed fonts.)

" +"for any changes to be noticed.

(You will also have to restart this " +"application in order to use its print function on any newly installed " +"fonts.)

" msgstr "" #: kcmfontinst/KCmFontInst.cpp:616 msgid "" -"Please note that any open applications will need to be restarted in order for " -"any changes to be noticed." +"Please note that any open applications will need to be restarted in order " +"for any changes to be noticed." msgstr "" #: kcmfontinst/KCmFontInst.cpp:619 viewpart/FontViewPart.cpp:244 @@ -235,13 +244,12 @@ msgstr "" #: kcmfontinst/SettingsDialog.cpp:52 msgid "" -"

Modern applications use a system called \"FontConfig\" to obtain the list of " -"fonts. Older applications, such as OpenOffice 1.x, GIMP 1.x, etc. use the " -"previous \"core X fonts\" mechanism for this.

" -"

Selecting this option will inform the installer to create the necessary " -"files so that these older applications can use the fonts you install.

" -"

Please note, however, that this will slow down the installation process." -"

" +"

Modern applications use a system called \"FontConfig\" to obtain the list " +"of fonts. Older applications, such as OpenOffice 1.x, GIMP 1.x, etc. use the " +"previous \"core X fonts\" mechanism for this.

Selecting this option " +"will inform the installer to create the necessary files so that these older " +"applications can use the fonts you install.

Please note, however, that " +"this will slow down the installation process.

" msgstr "" #: kcmfontinst/SettingsDialog.cpp:57 @@ -250,24 +258,23 @@ msgstr "" #: kcmfontinst/SettingsDialog.cpp:58 msgid "" -"

When printing, most applications create what is know as PostScript. This is " -"then sent to a special application, named Ghostscript, which can interpret the " -"PostScript and send the appropriate instructions to your printer. If your " -"application does not embed whatever fonts it uses into the PostScript, then " -"Ghostscript needs to be informed as to which fonts you have installed, and " -"where they are located.

" -"

Selecting this option will create the necessary Ghostscript config files.

" -"

Please note, however, that this will also slow down the installation " -"process.

" -"

As most applications can, and do, embed the fonts into the PostScript before " -"sending this to Ghostscript, this option can safely be disabled." +"

When printing, most applications create what is know as PostScript. This " +"is then sent to a special application, named Ghostscript, which can " +"interpret the PostScript and send the appropriate instructions to your " +"printer. If your application does not embed whatever fonts it uses into the " +"PostScript, then Ghostscript needs to be informed as to which fonts you have " +"installed, and where they are located.

Selecting this option will " +"create the necessary Ghostscript config files.

Please note, however, " +"that this will also slow down the installation process.

As most " +"applications can, and do, embed the fonts into the PostScript before sending " +"this to Ghostscript, this option can safely be disabled." msgstr "" #: kcmfontinst/SettingsDialog.cpp:84 msgid "" -"You have enabled a previously disabled option. Would you like the config files " -"updated now? (Normally they are only updated upon installing, or removing, a " -"font.)" +"You have enabled a previously disabled option. Would you like the config " +"files updated now? (Normally they are only updated upon installing, or " +"removing, a font.)" msgstr "" #: kcmfontinst/SettingsDialog.cpp:86 @@ -315,7 +322,7 @@ msgstr "" #: lib/FcEngine.cpp:721 msgid "" "_: Numbers and characters\n" -"0123456789.:,;(*!?'/\\\")£$€%^&-+@~#<>{}[]" +"0123456789.:,(*!?'/\\\")£$€%^&-+@~#<>{}[]" msgstr "" #: tdefile-plugin/KFileFont.cpp:287 @@ -338,10 +345,23 @@ msgstr "Mənşə" msgid "Weight" msgstr "Geniş" +#: tdefile-plugin/KFileFont.cpp:294 +msgid "Width" +msgstr "" + +#: tdefile-plugin/KFileFont.cpp:296 +msgid "Spacing" +msgstr "" + #: tdefile-plugin/KFileFont.cpp:297 msgid "Slant" msgstr "Slant" +#: tdeio/KioFonts.cpp:892 +#, fuzzy +msgid "Fonts" +msgstr "Yazı Növü Əlavə Et..." + #: tdeio/KioFonts.cpp:905 tdeio/KioFonts.cpp:2371 msgid "Please specify \"%1\" or \"%2\"." msgstr "Xahiş edirik \"%1\" ya da \"%2\" bildirin." @@ -357,17 +377,15 @@ msgid "Sorry, fonts cannot be renamed." msgstr "Təkcə yazı növləri qurula bilər." #: tdeio/KioFonts.cpp:1920 -msgid "" -"Incorrect password.\n" -msgstr "" -"Səhv şifrə.\n" +msgid "Incorrect password.\n" +msgstr "Səhv şifrə.\n" #: tdeio/KioFonts.cpp:1963 #, fuzzy msgid "" -"Do you wish to install the font into \"%1\" (in which case the font will only " -"be usable by you), or \"%2\" (the font will be usable by all users - but you " -"will need to know the administrator's password)?" +"Do you wish to install the font into \"%1\" (in which case the font will " +"only be usable by you), or \"%2\" (the font will be usable by all users - " +"but you will need to know the administrator's password)?" msgstr "" "Yazı növünü \"%1\" qovluğuna qurduğunuzda onu təkcə siz, \"%2\" qovluğuna " "qurduğunuzda isə bütün istifadəçilər işlədə biləcəkdir (bunun üçün ali " @@ -390,38 +408,31 @@ msgstr "\"%1\" qovluğuna yetişə bilmədi." #: tdeio/KioFonts.cpp:2146 msgid "" -"

Only fonts may be installed.

" -"

If installing a fonts package (*%1), then extract the components, and " -"install individually.

" +"

Only fonts may be installed.

If installing a fonts package (*%1), " +"then extract the components, and install individually.

" msgstr "" #: tdeio/KioFonts.cpp:2309 msgid "" -"

This font is located in a file alongside other fonts; in order to proceed " -"with the moving they will all have to be moved. The other affected fonts " -"are:

" -"
    %1
" -"

\n" +"

This font is located in a file alongside other fonts in order to proceed " +"with the moving they will all have to be moved. The other affected fonts are:" +"

    %1

\n" " Do you wish to move all of these?

" msgstr "" #: tdeio/KioFonts.cpp:2314 msgid "" -"

This font is located in a file alongside other fonts; in order to proceed " +"

This font is located in a file alongside other fonts in order to proceed " "with the copying they will all have to be copied. The other affected fonts " -"are:

" -"
    %1
" -"

\n" +"are:

    %1

\n" " Do you wish to copy all of these?

" msgstr "" #: tdeio/KioFonts.cpp:2318 msgid "" -"

This font is located in a file alongside other fonts; in order to proceed " +"

This font is located in a file alongside other fonts in order to proceed " "with the deleting they will all have to be deleted. The other affected fonts " -"are:

" -"
    %1
" -"

\n" +"are:

    %1

\n" " Do you wish to delete all of these?

" msgstr "" @@ -471,6 +482,10 @@ msgstr "%1:%2 müvəffəqiyyətlə quruldu!" msgid "Could not install %1:%2" msgstr "%1 qurula bilmədi:%2" +#: viewpart/FontViewPart.cpp:251 +msgid "Error" +msgstr "" + #: viewpart/FontViewPart.cpp:260 msgid "Preview String" msgstr "" @@ -506,16 +521,9 @@ msgstr "CFontViewPart" msgid "(c) Craig Drummond, 2004" msgstr "(c) Craig Drummond, 2000 - 2003" -#: _translatorinfo.cpp:1 -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "" - -#: _translatorinfo.cpp:3 -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" +#: viewpart/tdefontviewpart.rc:4 +#, no-c-format +msgid "&Main Toolbar" msgstr "" #~ msgid "Only fonts may be installed." @@ -533,8 +541,14 @@ msgstr "" #~ msgid "Disable" #~ msgstr "Qeyri fəallaşdır" -#~ msgid "

NOTE: As you are not logged in as \"root\", any fonts installed will only be available to you. To install fonts system wide, use the \"Administrator Mode\" button to run this module as \"root\".

" -#~ msgstr "

QEYD: \"ali istifadəçi\" olaraq girmədiyiniz üçün qurduğunuz hər yazı növü təkcə sizin üçün mövcud olacaq. Yazı növlərini sistemin tamamına qurmaq üçün \"İdarəçi Modu\" düyməsindən istifadə edin.

" +#~ msgid "" +#~ "

NOTE: As you are not logged in as \"root\", any fonts installed " +#~ "will only be available to you. To install fonts system wide, use the " +#~ "\"Administrator Mode\" button to run this module as \"root\".

" +#~ msgstr "" +#~ "

QEYD: \"ali istifadəçi\" olaraq girmədiyiniz üçün qurduğunuz " +#~ "hər yazı növü təkcə sizin üçün mövcud olacaq. Yazı növlərini sistemin " +#~ "tamamına qurmaq üçün \"İdarəçi Modu\" düyməsindən istifadə edin.

" #~ msgid "" #~ "_n: One Item\n" @@ -687,7 +701,8 @@ msgstr "" #~ "A hidden/disabled font (starting with a '.') already exists.\n" #~ "Please rename/enable this." #~ msgstr "" -#~ "Gizli/qeyri fəallaşdırılmış yazı növü ('.' ilə başlayan) onsuz da mövcuddur.\n" +#~ "Gizli/qeyri fəallaşdırılmış yazı növü ('.' ilə başlayan) onsuz da " +#~ "mövcuddur.\n" #~ "Xahiş edirik onu yenidən adlandırın/fəallaşdırın." #~ msgid "" @@ -701,7 +716,8 @@ msgstr "" #~ "A hidden/disabled folder (starting with a '.') already exists.\n" #~ "Please rename/enable this." #~ msgstr "" -#~ "Gizli/qeyri fəallaşdırılmış qovluq ('.' ilə başlayan) onsuz da mövcuddur.\n" +#~ "Gizli/qeyri fəallaşdırılmış qovluq ('.' ilə başlayan) onsuz da " +#~ "mövcuddur.\n" #~ "Xahiş edirik onu yenidən adlandırın/fəallaşdırın." #~ msgid "" -- cgit v1.2.1