From 48fc97bd7b0703f63b943c56148a48cff8d87fa6 Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sun, 9 Dec 2018 19:03:49 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. (cherry picked from commit a00e23b3d2a2ca065c585f305c106a3a27219ad4) --- tde-i18n-az/messages/tdelibs/cupsdconf.po | 1088 ++++++++++++++++++++++++++++- 1 file changed, 1059 insertions(+), 29 deletions(-) (limited to 'tde-i18n-az/messages/tdelibs/cupsdconf.po') diff --git a/tde-i18n-az/messages/tdelibs/cupsdconf.po b/tde-i18n-az/messages/tdelibs/cupsdconf.po index 5d781b6a98e..9f18ee74658 100644 --- a/tde-i18n-az/messages/tdelibs/cupsdconf.po +++ b/tde-i18n-az/messages/tdelibs/cupsdconf.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: cupsdconf\n" -"POT-Creation-Date: 2014-11-05 10:15-0600\n" +"POT-Creation-Date: 2018-12-07 05:08+0100\n" "PO-Revision-Date: 2004-01-04 20:59+0200\n" "Last-Translator: Mətin Əmirov \n" "Language-Team: Azerbaijani Turkish \n" @@ -17,6 +17,18 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "" + #: addressdialog.cpp:30 msgid "ACL Address" msgstr "ACL Ünvanı" @@ -179,8 +191,8 @@ msgstr "CUPS Quraşdırma Xətası" #: cupsddialog.cpp:197 msgid "" -"Some options were not recognized by this configuration tool. They will be left " -"untouched and you won't be able to change them." +"Some options were not recognized by this configuration tool. They will be " +"left untouched and you won't be able to change them." msgstr "" "Bu quraşdırma vasitəsi bə'zi seçimləri aşkar edə bilmədi. Onlara əl " "dəyilməyəcəkdir və siz onları dəyişdirə bilməyəcəksiniz." @@ -199,11 +211,11 @@ msgstr "CUPS vericisi (pid = %1) yenidən başladıla bilmədi" #: cupsddialog.cpp:249 msgid "" -"Unable to retrieve configuration file from the CUPS server. You probably don't " -"have the access permissions to perform this operation." +"Unable to retrieve configuration file from the CUPS server. You probably " +"don't have the access permissions to perform this operation." msgstr "" -"CUPS vericisindən quraşdırma faylı alına bilmədi. Deyəsən bu əməliyyatı həyata " -"keçirmək üçün lazımi səlahiyyətləriniz yoxdur." +"CUPS vericisindən quraşdırma faylı alına bilmədi. Deyəsən bu əməliyyatı " +"həyata keçirmək üçün lazımi səlahiyyətləriniz yoxdur." #: cupsddialog.cpp:259 msgid "Internal error: file '%1' not readable/writable!" @@ -215,16 +227,16 @@ msgstr "Daxili xəta: boş fayl '%1'!" #: cupsddialog.cpp:280 msgid "" -"The config file has not been uploaded to the CUPS server. The daemon will not " -"be restarted." +"The config file has not been uploaded to the CUPS server. The daemon will " +"not be restarted." msgstr "" "Quraşdirma faylı CUPS vericisinə gündərilməyib.\n" " Demon yenidən başladılmayacaqdır." #: cupsddialog.cpp:284 msgid "" -"Unable to upload the configuration file to CUPS server. You probably don't have " -"the access permissions to perform this operation." +"Unable to upload the configuration file to CUPS server. You probably don't " +"have the access permissions to perform this operation." msgstr "" "Quraşdırma faylı CUPS vericisinə gündərilə bilmədi. Deyəsən bu əməliyyatı " "həyata keçirmək üçün lazımi səlahiyyətləriniz yoxdur." @@ -400,6 +412,14 @@ msgstr "Şəbəkə Qurğuları" msgid "Keep alive" msgstr "Canlı tut" +#: cupsdnetworkpage.cpp:63 +msgid "Off" +msgstr "" + +#: cupsdnetworkpage.cpp:64 +msgid "On" +msgstr "" + #: cupsdnetworkpage.cpp:65 msgid "Double" msgstr "Cüt" @@ -461,7 +481,12 @@ msgstr "Mövqelər:" msgid "" "This location is already defined. Do you want to replace the existing one?" msgstr "" -"Bu mövqe onsuz da müəyyən edilibdir. Mövcud olanın üstünə yazmaq istəyirsiniz?" +"Bu mövqe onsuz da müəyyən edilibdir. Mövcud olanın üstünə yazmaq " +"istəyirsiniz?" + +#: cupsdsecuritypage.cpp:128 +msgid "Replace" +msgstr "" #: cupsdserverpage.cpp:43 msgid "Server" @@ -542,23 +567,21 @@ msgstr "Xoş Gəldiniz" #: cupsdsplash.cpp:49 msgid "" "

This tool will help you to configure graphically the server of the CUPS " -"printing system. The available options are grouped into sets of related topics " -"and can be accessed quickly through the icon view located on the left. Each " -"option has a default value that is shown if it has not been previously set. " -"This default value should be OK in most cases.

" -"
" -"

You can access a short help message for each option using either the '?' " -"button in the the title bar, or the button at the bottom of this dialog.

" -msgstr "" -"

Bu vasitə ilə CUPS çap sisteminizi qrafiki olaraq quraşdıracaqsınız. Soldakı " -"ağacdan mövcud seçimləri görə bilərsiniz. Bu seçimlər sizin rahat səyahət " -"etməyiniz üçün qruplanmıştır.Hər seçimin əsas qiyməti vardır. Əvvəlcədən hər " -"hansı bir qiymət verilməyibsə, bu qiymət göstəriləcəkdir. Qiyməti işlətmək " -"istəsəniz, seçimin sağındakı qutunu işarələyin. Ümumiyyətlə ön qurğulu seçim " -"optimal sayılır.

" -"
" -"

Hər seçim üçün qısa yardımı başlıq çubuğundakı '?' düyməsi ya da bu dialoqun " -"alt tərəfindəki düymə vasitəsilə görə bilərsiniz.

" +"printing system. The available options are grouped into sets of related " +"topics and can be accessed quickly through the icon view located on the " +"left. Each option has a default value that is shown if it has not been " +"previously set. This default value should be OK in most cases.


You " +"can access a short help message for each option using either the '?' button " +"in the the title bar, or the button at the bottom of this dialog.

" +msgstr "" +"

Bu vasitə ilə CUPS çap sisteminizi qrafiki olaraq quraşdıracaqsınız. " +"Soldakı ağacdan mövcud seçimləri görə bilərsiniz. Bu seçimlər sizin rahat " +"səyahət etməyiniz üçün qruplanmıştır.Hər seçimin əsas qiyməti vardır. " +"Əvvəlcədən hər hansı bir qiymət verilməyibsə, bu qiymət göstəriləcəkdir. " +"Qiyməti işlətmək istəsəniz, seçimin sağındakı qutunu işarələyin. Ümumiyyətlə " +"ön qurğulu seçim optimal sayılır.


Hər seçim üçün qısa yardımı " +"başlıq çubuğundakı '?' düyməsi ya da bu dialoqun alt tərəfindəki düymə " +"vasitəsilə görə bilərsiniz.

" #: editlist.cpp:33 msgid "Add..." @@ -568,6 +591,10 @@ msgstr "Əlavə Et..." msgid "Edit..." msgstr "Düzəlt..." +#: editlist.cpp:35 +msgid "Delete" +msgstr "" + #: editlist.cpp:36 msgid "Default List" msgstr "Ön Qurğulu Siyahı" @@ -687,3 +714,1006 @@ msgstr "GB" #: sizewidget.cpp:37 msgid "Tiles" msgstr "Kirəmitlər" + +#: cupsd.conf.template:23 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server name (ServerName)\n" +"

\n" +"The hostname of your server, as advertised to the world.\n" +"By default CUPS will use the hostname of the system.

\n" +"

\n" +"To set the default server used by clients, see the client.conf file.

\n" +"

\n" +"ex: myhost.domain.com

\n" +msgstr "" + +#: cupsd.conf.template:36 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server administrator (ServerAdmin)\n" +"

\n" +"The email address to send all complaints or problems to.\n" +"By default CUPS will use \"root@hostname\".

\n" +"

\n" +"ex: root@myhost.com

\n" +msgstr "" + +#: cupsd.conf.template:47 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Access log (AccessLog)\n" +"

\n" +"The access log file if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/access_log\".

\n" +"

\n" +"You can also use the special name syslog to send the output to the\n" +"syslog file or daemon.

\n" +"

\n" +"ex: /var/log/cups/access_log

\n" +msgstr "" + +#: cupsd.conf.template:62 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Data directory (DataDir)\n" +"

\n" +"The root directory for the CUPS data files.\n" +"By default /usr/share/cups.

\n" +"

\n" +"ex: /usr/share/cups

\n" +msgstr "" + +#: cupsd.conf.template:73 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Default character set (DefaultCharset)\n" +"

\n" +"The default character set to use. If not specified,\n" +"defaults to utf-8. Note that this can also be overridden in\n" +"HTML documents...

\n" +"

\n" +"ex: utf-8

\n" +msgstr "" + +#: cupsd.conf.template:85 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Default language (DefaultLanguage)\n" +"

\n" +"The default language if not specified by the browser.\n" +"If not specified, the current locale is used.

\n" +"

\n" +"ex: en

\n" +msgstr "" + +#: cupsd.conf.template:96 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Document directory (DocumentRoot)\n" +"

\n" +"The root directory for HTTP documents that are served.\n" +"By default the compiled-in directory.

\n" +"

\n" +"ex: /usr/share/cups/doc-root

\n" +msgstr "" + +#: cupsd.conf.template:107 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Error log (ErrorLog)\n" +"

\n" +"The error log file if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/error_log\".

\n" +"

\n" +"You can also use the special name syslog to send the output to the\n" +"syslog file or daemon.

\n" +"

\n" +"ex: /var/log/cups/error_log

\n" +msgstr "" + +#: cupsd.conf.template:122 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Font path (FontPath)\n" +"

\n" +"The path to locate all font files (currently only for pstoraster).\n" +"By default /usr/share/cups/fonts.

\n" +"

\n" +"ex: /usr/share/cups/fonts

\n" +msgstr "" + +#: cupsd.conf.template:133 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Log level (LogLevel)\n" +"

\n" +"Controls the number of messages logged to the ErrorLog\n" +"file and can be one of the following:

\n" +"
    \n" +"
  • debug2: Log everything.
    • \n" +"
  • debug: Log almost everything.
    • \n" +"
  • info: Log all requests and state changes.
    • \n" +"
  • warn: Log errors and warnings.
    • \n" +"
  • error: Log only errors.
    • \n" +"
  • none: Log nothing.
    • \n" +"

\n" +"ex: info

\n" +msgstr "" + +#: cupsd.conf.template:151 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max log size (MaxLogSize)\n" +"

\n" +"Controls the maximum size of each log file before they are\n" +"rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

\n" +"

\n" +"ex: 1048576

\n" +msgstr "" + +#: cupsd.conf.template:162 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Page log (PageLog)\n" +"

\n" +"The page log file if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/page_log\".

\n" +"

\n" +"You can also use the special name syslog to send the output to the\n" +"syslog file or daemon.

\n" +"

\n" +"ex: /var/log/cups/page_log

\n" +msgstr "" + +#: cupsd.conf.template:177 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Preserve job history (PreserveJobHistory)\n" +"

\n" +"Whether or not to preserve the job history after a\n" +"job is completed, canceled, or stopped. Default is Yes.

\n" +"

\n" +"ex: Yes

\n" +msgstr "" + +#: cupsd.conf.template:188 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Preserve job files (PreserveJobFiles)\n" +"

\n" +"Whether or not to preserve the job files after a\n" +"job is completed, canceled, or stopped. Default is No.

\n" +"

\n" +"ex: No

\n" +msgstr "" + +#: cupsd.conf.template:199 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Printcap file (Printcap)\n" +"

\n" +"The name of the printcap file. Default is no filename.\n" +"Leave blank to disable printcap file generation.

\n" +"

\n" +"ex: /etc/printcap

\n" +msgstr "" + +#: cupsd.conf.template:210 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Request directory (RequestRoot)\n" +"

\n" +"The directory where request files are stored.\n" +"By default /var/spool/cups.

\n" +"

\n" +"ex: /var/spool/cups

\n" +msgstr "" + +#: cupsd.conf.template:221 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Remote root user (RemoteRoot)\n" +"

\n" +"The name of the user assigned to unauthenticated accesses\n" +"from remote systems. By default \"remroot\".

\n" +"

\n" +"ex: remroot

\n" +msgstr "" + +#: cupsd.conf.template:232 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server binaries (ServerBin)\n" +"

\n" +"The root directory for the scheduler executables.\n" +"By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).

\n" +"

\n" +"ex: /usr/lib/cups

\n" +msgstr "" + +#: cupsd.conf.template:243 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server files (ServerRoot)\n" +"

\n" +"The root directory for the scheduler.\n" +"By default /etc/cups.

\n" +"

\n" +"ex: /etc/cups

\n" +msgstr "" + +#: cupsd.conf.template:254 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"User (User)\n" +"

\n" +"The user the server runs under. Normally this\n" +"must be lp, however you can configure things for another user\n" +"as needed.

\n" +"

\n" +"Note: the server must be run initially as root to support the\n" +"default IPP port of 631. It changes users whenever an external\n" +"program is run...

\n" +"

\n" +"ex: lp

\n" +msgstr "" + +#: cupsd.conf.template:270 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Group (Group)\n" +"

\n" +"The group the server runs under. Normally this\n" +"must be lpadmin, however you can configure things for another\n" +"group as needed.

\n" +"

\n" +"ex: lpadmin

\n" +msgstr "" + +#: cupsd.conf.template:282 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"RIP cache (RIPCache)\n" +"

\n" +"The amount of memory that each RIP should use to cache\n" +"bitmaps. The value can be any real number followed by \"k\" for\n" +"kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n" +"(1 tile = 256x256 pixels). Defaults to \"8m\" (8 megabytes).

\n" +"

\n" +"ex: 8m

\n" +msgstr "" + +#: cupsd.conf.template:295 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Temporary files (TempDir)\n" +"

\n" +"The directory to put temporary files in. This directory must be\n" +"writable by the user defined above! Defaults to \"/var/spool/cups/tmp\" or\n" +"the value of the TMPDIR environment variable.

\n" +"

\n" +"ex: /var/spool/cups/tmp

\n" +msgstr "" + +#: cupsd.conf.template:307 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Filter limit (FilterLimit)\n" +"

\n" +"Sets the maximum cost of all job filters that can be run\n" +"at the same time. A limit of 0 means no limit. A typical job may need\n" +"a filter limit of at least 200 limits less than the minimum required\n" +"by a job force a single job to be printed at any time.

\n" +"

\n" +"The default limit is 0 (unlimited).

\n" +"

\n" +"ex: 200

\n" +msgstr "" + +#: cupsd.conf.template:322 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Listen to (Port/Listen)\n" +"

\n" +"Ports/addresses that are listened to. The default port 631 is reserved\n" +"for the Internet Printing Protocol (IPP) and is what is used here.

\n" +"

\n" +"You can have multiple Port/Listen lines to listen to more than one\n" +"port or address, or to restrict access.

\n" +"

\n" +"Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n" +"for encryption. If you want to support web-based encryption you will\n" +"probably need to listen on port 443 (the \"HTTPS\" port...).

\n" +"

\n" +"ex: 631, myhost:80, 1.2.3.4:631

\n" +msgstr "" + +#: cupsd.conf.template:348 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Hostname lookups (HostNameLookups)\n" +"

\n" +"Whether or not to do lookups on IP addresses to get a\n" +"fully-qualified hostname. This defaults to Off for performance reasons...\n" +"

\n" +"ex: On

\n" +msgstr "" + +#: cupsd.conf.template:359 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Keep alive (KeepAlive)\n" +"

\n" +"Whether or not to support the Keep-Alive connection\n" +"option. Default is on.

\n" +"

\n" +"ex: On

\n" +msgstr "" + +#: cupsd.conf.template:370 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Keep-alive timeout (KeepAliveTimeout)\n" +"

\n" +"The timeout (in seconds) before Keep-Alive connections are\n" +"automatically closed. Default is 60 seconds.

\n" +"

\n" +"ex: 60

\n" +msgstr "" + +#: cupsd.conf.template:381 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max clients (MaxClients)\n" +"

\n" +"Controls the maximum number of simultaneous clients that\n" +"will be handled. Defaults to 100.

\n" +"

\n" +"ex: 100

\n" +msgstr "" + +#: cupsd.conf.template:392 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max request size (MaxRequestSize)\n" +"

\n" +"Controls the maximum size of HTTP requests and print files.\n" +"Set to 0 to disable this feature (defaults to 0).

\n" +"

\n" +"ex: 0

\n" +msgstr "" + +#: cupsd.conf.template:403 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Client timeout (Timeout)\n" +"

\n" +"The timeout (in seconds) before requests time out. Default is 300 seconds.\n" +"

\n" +"ex: 300

\n" +msgstr "" + +#: cupsd.conf.template:413 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Use browsing (Browsing)\n" +"

\n" +"Whether or not to listen to printer \n" +"information from other CUPS servers. \n" +"

\n" +"

\n" +"Enabled by default.\n" +"

\n" +"

\n" +"Note: to enable the sending of browsing\n" +"information from this CUPS server to the LAN,\n" +"specify a valid BrowseAddress.\n" +"

\n" +"

\n" +"ex: On

\n" +msgstr "" + +#: cupsd.conf.template:433 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Use short names (BrowseShortNames)\n" +"

\n" +"Whether or not to use \"short\" names for remote printers\n" +"when possible (e.g. \"printer\" instead of \"printer@host\"). Enabled by\n" +"default.

\n" +"

\n" +"ex: Yes

\n" +msgstr "" + +#: cupsd.conf.template:445 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse addresses (BrowseAddress)\n" +"

\n" +"Specifies a broadcast address to be used. By\n" +"default browsing information is broadcast to all active interfaces.

\n" +"

\n" +"Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n" +"you have a Class A, B, C, or D netmask (i.e. no CIDR support).

\n" +"

\n" +"ex: x.y.z.255, x.y.255.255

\n" +msgstr "" + +#: cupsd.conf.template:461 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse allow/deny (BrowseAllow/BrowseDeny)\n" +"

\n" +"BrowseAllow: specifies an address mask to allow for incoming browser\n" +"packets. The default is to allow packets from all addresses.

\n" +"

\n" +"BrowseDeny: specifies an address mask to deny for incoming browser\n" +"packets. The default is to deny packets from no addresses.

\n" +"

\n" +"Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n" +"addresses:

\n" +"
\n"
+"All\n"
+"None\n"
+"*.domain.com\n"
+".domain.com\n"
+"host.domain.com\n"
+"nnn.*\n"
+"nnn.nnn.*\n"
+"nnn.nnn.nnn.*\n"
+"nnn.nnn.nnn.nnn\n"
+"nnn.nnn.nnn.nnn/mm\n"
+"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
+"

\n" +"The hostname/domainname restrictions only work if you have turned hostname\n" +"lookups on!

\n" +msgstr "" + +#: cupsd.conf.template:492 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse interval (BrowseInterval)\n" +"

\n" +"The time between browsing updates in seconds. Default\n" +"is 30 seconds.

\n" +"

\n" +"Note that browsing information is sent whenever a printer's state changes\n" +"as well, so this represents the maximum time between updates.

\n" +"

\n" +"Set this to 0 to disable outgoing broadcasts so your local printers are\n" +"not advertised but you can still see printers on other hosts.

\n" +"

\n" +"ex: 30

\n" +msgstr "" + +#: cupsd.conf.template:509 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse order (BrowseOrder)\n" +"

\n" +"Specifies the order of BrowseAllow/BrowseDeny comparisons.

\n" +"

\n" +"ex: allow,deny

\n" +msgstr "" + +#: cupsd.conf.template:520 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse poll (BrowsePoll)\n" +"

\n" +"Poll the named server(s) for printers.

\n" +"

\n" +"ex: myhost:631

\n" +msgstr "" + +#: cupsd.conf.template:530 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse port (BrowsePort)\n" +"

\n" +"The port used for UDP broadcasts. By default this is\n" +"the IPP port if you change this you need to do it on all servers.\n" +"Only one BrowsePort is recognized.

\n" +"

\n" +"ex: 631

\n" +msgstr "" + +#: cupsd.conf.template:542 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse relay (BrowseRelay)\n" +"

\n" +"Relay browser packets from one address/network to another.

\n" +"

\n" +"ex: src-address dest-address

\n" +msgstr "" + +#: cupsd.conf.template:552 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse timeout (BrowseTimeout)\n" +"

\n" +"The timeout (in seconds) for network printers - if we don't\n" +"get an update within this time the printer will be removed\n" +"from the printer list. This number definitely should not be\n" +"less the BrowseInterval value for obvious reasons. Defaults\n" +"to 300 seconds.

\n" +"

\n" +"ex: 300

\n" +msgstr "" + +#: cupsd.conf.template:566 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Implicit classes (ImplicitClasses)\n" +"

\n" +"Whether or not to use implicit classes.

\n" +"

\n" +"Printer classes can be specified explicitly in the classes.conf\n" +"file, implicitly based upon the printers available on the LAN, or\n" +"both.

\n" +"

\n" +"When ImplicitClasses is On, printers on the LAN with the same name\n" +"(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n" +"name. This allows you to setup multiple redundant queues on a LAN\n" +"without a lot of administrative difficulties. If a user sends a\n" +"job to Acme-LaserPrint-1000, the job will go to the first available\n" +"queue.

\n" +"

\n" +"Enabled by default.

\n" +msgstr "" + +#: cupsd.conf.template:587 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"System group (SystemGroup)\n" +"

\n" +"The group name for \"System\" (printer administration)\n" +"access. The default varies depending on the operating system, but\n" +"will be sys, system, or root (checked for in that " +"order).

\n" +"

\n" +"ex: lpadmin

\n" +msgstr "" + +#: cupsd.conf.template:599 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Encryption certificate (ServerCertificate)\n" +"

\n" +"The file to read containing the server's certificate.\n" +"Defaults to \"/etc/cups/ssl/server.crt\".

\n" +"

\n" +"ex: /etc/cups/ssl/server.crt

\n" +msgstr "" + +#: cupsd.conf.template:610 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Encryption key (ServerKey)\n" +"

\n" +"The file to read containing the server's key.\n" +"Defaults to \"/etc/cups/ssl/server.key\".

\n" +"

\n" +"ex: /etc/cups/ssl/server.key

\n" +msgstr "" + +#: cupsd.conf.template:621 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Access permissions\n" +"Access permissions for each directory served by the scheduler.\n" +"Locations are relative to DocumentRoot...\n" +"AuthType: the authorization to use:\n" +"None - Perform no authentication\n" +"Basic - Perform authentication using the HTTP Basic method.\n" +"Digest - Perform authentication using the HTTP Digest method.\n" +"(Note: local certificate authentication can be substituted by\n" +"the client for Basic or Digest when connecting to the\n" +"localhost interface)\n" +"AuthClass: the authorization class currently only Anonymous, User,\n" +"System (valid user belonging to group SystemGroup), and Group\n" +"(valid user belonging to the specified group) are supported.\n" +"AuthGroupName: the group name for \"Group\" authorization.\n" +"Order: the order of Allow/Deny processing.\n" +"Allow: allows access from the specified hostname, domain, IP address, or\n" +"network.\n" +"Deny: denies access from the specified hostname, domain, IP address, or\n" +"network.\n" +"Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n" +"All\n" +"None\n" +"*.domain.com\n" +".domain.com\n" +"host.domain.com\n" +"nnn.*\n" +"nnn.nnn.*\n" +"nnn.nnn.nnn.*\n" +"nnn.nnn.nnn.nnn\n" +"nnn.nnn.nnn.nnn/mm\n" +"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.\n" +"Encryption: whether or not to use encryption this depends on having\n" +"the OpenSSL library linked into the CUPS library and scheduler.\n" +"Possible values:\n" +"Always - Always use encryption (SSL)\n" +"Never - Never use encryption\n" +"Required - Use TLS encryption upgrade\n" +"IfRequested - Use encryption if the server requests it\n" +"The default value is \"IfRequested\".\n" +msgstr "" + +#: cupsd.conf.template:707 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Authentication (AuthType)\n" +"

\n" +"The authorization to use:

\n" +"

    \n" +"
  • None - Perform no authentication.
    • \n" +"
  • Basic - Perform authentication using the HTTP Basic method.\n" +"
  • Digest - Perform authentication using the HTTP Digest method.\n" +"

\n" +"Note: local certificate authentication can be substituted by\n" +"the client for Basic or Digest when connecting to the\n" +"localhost interface.

\n" +msgstr "" + +#: cupsd.conf.template:721 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Class (AuthClass)\n" +"

\n" +"The authorization class currently only Anonymous, User,\n" +"System (valid user belonging to group SystemGroup), and Group\n" +"(valid user belonging to the specified group) are supported.

\n" +msgstr "" + +#: cupsd.conf.template:729 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"

The user/group names allowed to access the resource. The format is a\n" +"comma separated list.

\n" +msgstr "" + +#: cupsd.conf.template:734 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Satisfy (Satisfy)\n" +"

\n" +"This directive controls whether all specified conditions must\n" +"be satisfied to allow access to the resource. If set to \"all\",\n" +"then all authentication and access control conditions must be\n" +"satisfied to allow access.\n" +"

\n" +"

\n" +"Setting Satisfy to \"any\" allows a user to gain access if the\n" +"authentication or access control requirements are satisfied.\n" +"For example, you might require authentication for remote access,\n" +"but allow local access without authentication.\n" +"

\n" +"

\n" +"The default is \"all\".\n" +"

\n" +msgstr "" + +#: cupsd.conf.template:753 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Authentication group name (AuthGroupName)\n" +"

\n" +"The group name for Group authorization.

\n" +msgstr "" + +#: cupsd.conf.template:759 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"ACL order (Order)\n" +"

\n" +"The order of Allow/Deny processing.

\n" +msgstr "" + +#: cupsd.conf.template:765 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Allow\n" +"

\n" +"Allows access from the specified hostname, domain, IP address, or\n" +"network. Possible values are:

\n" +"
\n"
+"All\n"
+"None\n"
+"*.domain.com\n"
+".domain.com\n"
+"host.domain.com\n"
+"nnn.*\n"
+"nnn.nnn.*\n"
+"nnn.nnn.nnn.*\n"
+"nnn.nnn.nnn.nnn\n"
+"nnn.nnn.nnn.nnn/mm\n"
+"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
+"

\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.

\n" +msgstr "" + +#: cupsd.conf.template:787 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"ACL addresses (Allow/Deny)\n" +"

\n" +"Allows/Denies access from the specified hostname, domain, IP address, or\n" +"network. Possible values are:

\n" +"
\n"
+"All\n"
+"None\n"
+"*.domain.com\n"
+".domain.com\n"
+"host.domain.com\n"
+"nnn.*\n"
+"nnn.nnn.*\n"
+"nnn.nnn.nnn.*\n"
+"nnn.nnn.nnn.nnn\n"
+"nnn.nnn.nnn.nnn/mm\n"
+"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
+"

\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.

\n" +msgstr "" + +#: cupsd.conf.template:809 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Encryption (Encryption)\n" +"

\n" +"Whether or not to use encryption this depends on having\n" +"the OpenSSL library linked into the CUPS library and scheduler.

\n" +"

\n" +"Possible values:

\n" +"
    \n" +"
  • Always - Always use encryption (SSL)
    • \n" +"
  • Never - Never use encryption
    • \n" +"
  • Required - Use TLS encryption upgrade
    • \n" +"
  • IfRequested - Use encryption if the server requests it
    • \n" +"

\n" +"The default value is \"IfRequested\".

\n" +msgstr "" + +#: cupsd.conf.template:825 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Access permissions\n" +"

\n" +"Access permissions for each directory served by the scheduler.\n" +"Locations are relative to DocumentRoot...

\n" +msgstr "" + +#: cupsd.conf.template:832 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Auto purge jobs (AutoPurgeJobs)\n" +"

\n" +"Automatically purge jobs when not needed for quotas.\n" +"Default is No.

\n" +msgstr "" + +#: cupsd.conf.template:841 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse protocols (BrowseProtocols)\n" +"

\n" +"Which protocols to use for browsing. Can be\n" +"any of the following separated by whitespace and/or commas:

\n" +"
    \n" +"
  • all - Use all supported protocols.
    • \n" +"
  • cups - Use the CUPS browse protocol.
    • \n" +"
  • slp - Use the SLPv2 protocol.
    • \n" +"

\n" +"The default is cups.

\n" +"

\n" +"Note: If you choose to use SLPv2, it is strongly recommended that\n" +"you have at least one SLP Directory Agent (DA) on your\n" +"network. Otherwise, browse updates can take several seconds,\n" +"during which the scheduler will not response to client\n" +"requests.

\n" +msgstr "" + +#: cupsd.conf.template:862 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Classification (Classification)\n" +"

\n" +"The classification level of the server. If set, this\n" +"classification is displayed on all pages, and raw printing is disabled.\n" +"The default is the empty string.

\n" +"

\n" +"ex: confidential\n" +msgstr "" + +#: cupsd.conf.template:874 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Allow overrides (ClassifyOverride)\n" +"

\n" +"Whether to allow users to override the classification\n" +"on printouts. If enabled, users can limit banner pages to before or\n" +"after the job, and can change the classification of a job, but cannot\n" +"completely eliminate the classification or banners.

\n" +"

\n" +"The default is off.

\n" +msgstr "" + +#: cupsd.conf.template:887 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Hide implicit members (HideImplicitMembers)\n" +"

\n" +"Whether or not to show the members of an\n" +"implicit class.

\n" +"

\n" +"When HideImplicitMembers is On, any remote printers that are\n" +"part of an implicit class are hidden from the user, who will\n" +"then only see a single queue even though many queues will be\n" +"supporting the implicit class.

\n" +"

\n" +"Enabled by default.

\n" +msgstr "" + +#: cupsd.conf.template:903 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Use "any" classes (ImplicitAnyClasses)\n" +"

\n" +"Whether or not to create AnyPrinter implicit\n" +"classes.

\n" +"

\n" +"When ImplicitAnyClasses is On and a local queue of the same name\n" +"exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n" +"an implicit class called \"Anyprinter\" is created instead.

\n" +"

\n" +"When ImplicitAnyClasses is Off, implicit classes are not created\n" +"when there is a local queue of the same name.

\n" +"

\n" +"Disabled by default.

\n" +msgstr "" + +#: cupsd.conf.template:921 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max jobs (MaxJobs)\n" +"

\n" +"Maximum number of jobs to keep in memory (active and completed).\n" +"Default is 0 (no limit).

\n" +msgstr "" + +#: cupsd.conf.template:930 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max jobs per user (MaxJobsPerUser)\n" +"

\n" +"The MaxJobsPerUser directive controls the maximum number of active\n" +"jobs that are allowed for each user. Once a user reaches the limit, new\n" +"jobs will be rejected until one of the active jobs is completed, stopped,\n" +"aborted, or canceled.

\n" +"

\n" +"Setting the maximum to 0 disables this functionality.\n" +"Default is 0 (no limit).\n" +"

\n" +msgstr "" + +#: cupsd.conf.template:945 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max jobs per printer (MaxJobsPerPrinter)\n" +"

\n" +"The MaxJobsPerPrinter directive controls the maximum number of active\n" +"jobs that are allowed for each printer or class. Once a printer or class\n" +"reaches the limit, new jobs will be rejected until one of the active jobs\n" +"is completed, stopped, aborted, or canceled.

\n" +"

\n" +"Setting the maximum to 0 disables this functionality.\n" +"Default is 0 (no limit).\n" +"

\n" +msgstr "" + +#: cupsd.conf.template:960 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Port\n" +"

\n" +"The port value that the CUPS daemon is listening to. Default is 631.

\n" +msgstr "" + +#: cupsd.conf.template:966 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Address\n" +"

\n" +"The address that the CUPS daemon is listening at. Leave it empty or use\n" +"an asterisk (*) to specify a port value on the entire subnetwork.

\n" +msgstr "" + +#: cupsd.conf.template:973 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"

Check this box if you want to use SSL encryption with this address/port.\n" +"

\n" +msgstr "" -- cgit v1.2.1