From 9b58d35185905f8334142bf4988cb784e993aea7 Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Mon, 21 Nov 2011 02:23:03 -0600 Subject: Initial import of extracted KDE i18n tarballs --- tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.am | 4 + tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.in | 635 +++++++++++++++++ .../docs/kdesdk/umbrello/authors.docbook | 46 ++ .../umbrello/code_import_and_generation.docbook | 163 +++++ .../docs/kdesdk/umbrello/credits.docbook | 11 + .../docs/kdesdk/umbrello/index.cache.bz2 | Bin 0 -> 17724 bytes tde-i18n-en_GB/docs/kdesdk/umbrello/index.docbook | 85 +++ .../docs/kdesdk/umbrello/introduction.docbook | 57 ++ .../docs/kdesdk/umbrello/other_features.docbook | 76 ++ .../docs/kdesdk/umbrello/uml_basics.docbook | 782 +++++++++++++++++++++ .../kdesdk/umbrello/working_with_umbrello.docbook | 413 +++++++++++ 11 files changed, 2272 insertions(+) create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.am create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.in create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/authors.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/code_import_and_generation.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/credits.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/index.cache.bz2 create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/index.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/introduction.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/other_features.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/uml_basics.docbook create mode 100644 tde-i18n-en_GB/docs/kdesdk/umbrello/working_with_umbrello.docbook (limited to 'tde-i18n-en_GB/docs/kdesdk/umbrello') diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.am b/tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.am new file mode 100644 index 00000000000..f781297a70f --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.am @@ -0,0 +1,4 @@ +KDE_LANG = en_GB +SUBDIRS = $(AUTODIRS) +KDE_DOCS = AUTO +KDE_MANS = AUTO diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.in b/tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.in new file mode 100644 index 00000000000..94956aa16f4 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/Makefile.in @@ -0,0 +1,635 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = docs/kdesdk/umbrello +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-dvi-recursive install-exec-recursive \ +#>- install-html-recursive install-info-recursive \ +#>- install-pdf-recursive install-ps-recursive install-recursive \ +#>- installcheck-recursive installdirs-recursive pdf-recursive \ +#>- ps-recursive uninstall-recursive +#>+ 7 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CONF_FILES = @CONF_FILES@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +GMSGFMT = @GMSGFMT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_RPATH = @KDE_RPATH@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XMLLINT = @XMLLINT@ +X_RPATH = @X_RPATH@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +#>- bindir = @bindir@ +#>+ 2 +DEPDIR = .deps +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +kdeinitdir = @kdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +KDE_LANG = en_GB +#>- SUBDIRS = $(AUTODIRS) +#>+ 1 +SUBDIRS =. +KDE_DOCS = AUTO +KDE_MANS = AUTO +#>- all: all-recursive +#>+ 1 +all: docs-am all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/kdesdk/umbrello/Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu docs/kdesdk/umbrello/Makefile +#>+ 12 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/kdesdk/umbrello/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/kdesdk/umbrello/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/kdesdk/umbrello/Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +#>- distdir: $(DISTFILES) +#>+ 1 +distdir: distdir-nls $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +#>- uninstall: uninstall-recursive +#>+ 1 +uninstall: uninstall-docs uninstall-nls uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic mostlyclean-am +#>+ 1 +clean-am: clean-docs clean-bcheck clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +#>- install-data-am: +#>+ 1 +install-data-am: install-docs install-nls + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-generic ctags \ + ctags-recursive distclean distclean-generic distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=uml_basics.docbook index.docbook credits.docbook code_import_and_generation.docbook index.cache.bz2 Makefile.in other_features.docbook introduction.docbook working_with_umbrello.docbook authors.docbook Makefile.am + +#>+ 24 +index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) other_features.docbook code_import_and_generation.docbook index.docbook introduction.docbook credits.docbook working_with_umbrello.docbook uml_basics.docbook authors.docbook + @if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi + +docs-am: index.cache.bz2 + +install-docs: docs-am install-nls + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello + @if test -f index.cache.bz2; then \ + echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/; \ + $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/; \ + elif test -f $(srcdir)/index.cache.bz2; then \ + echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/; \ + $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/; \ + fi + -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/common + $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/common + +uninstall-docs: + -rm -rf $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello + +clean-docs: + -rm -f index.cache.bz2 + + +#>+ 13 +install-nls: + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello + @for base in other_features.docbook code_import_and_generation.docbook index.docbook introduction.docbook credits.docbook working_with_umbrello.docbook uml_basics.docbook authors.docbook ; do \ + echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/$$base ;\ + $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/$$base ;\ + done + +uninstall-nls: + for base in other_features.docbook code_import_and_generation.docbook index.docbook introduction.docbook credits.docbook working_with_umbrello.docbook uml_basics.docbook authors.docbook ; do \ + rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/umbrello/$$base ;\ + done + + +#>+ 5 +distdir-nls: + for file in other_features.docbook code_import_and_generation.docbook index.docbook introduction.docbook credits.docbook working_with_umbrello.docbook uml_basics.docbook authors.docbook ; do \ + cp $(srcdir)/$$file $(distdir); \ + done + +#>+ 15 +force-reedit: + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/kdesdk/umbrello/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu docs/kdesdk/umbrello/Makefile + cd $(top_srcdir) && perl ../scripts/admin/am_edit -p../scripts/admin docs/kdesdk/umbrello/Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/authors.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/authors.docbook new file mode 100644 index 00000000000..8978a5ae7c3 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/authors.docbook @@ -0,0 +1,46 @@ + +Authors and History +This project was started by Paul Hensgen as one of his University projects. The original name of the application was UML Modeller. Paul did all the development until the end of 2001 when the program reached version 1.0. +Version 1.0 already offered a lot of functionality, but after the project had been reviewed at Paul's University, other developers could join and they started making valuable contributions to UML Modeller, like switching from a binary file format to an &XML; file, support for more types of &UML; Diagrams, Code Generation and Code Import just to name a few. +Paul had to retire from the development team in Summer 2002 but, as Free and Open Source Software, the program continues to improve and evolve and is being maintained by a group of developers from different parts of the world. In September 2002 the project changed its name from &UML; Modeller, to &umbrello;. There are several reasons for the change of names, the most important ones being that just uml — as it was commonly known — was a much too generic name and caused problems with some distributions. The other important reason is that the developers think Umbrello is a much cooler name. +The development of &umbrello; as well as discussions as to where the program should head for future versions is open and takes place over the Internet. If you would like to contribute to the project, please do not hesitate to contact the developers. There are many ways in which you can help &umbrello;: + +Reporting bugs or improvements suggestions +Fixing bugs or adding features +Writing good documentation or translating it to other languages +And of course...coding with us! + +As you see, there are many ways in which you can contribute. All of them are very important and everyone is welcome to participate. +The &umbrello; developers can be reached at uml-devel@lists.sourceforge.net. + diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/code_import_and_generation.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/code_import_and_generation.docbook new file mode 100644 index 00000000000..429217884c1 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/code_import_and_generation.docbook @@ -0,0 +1,163 @@ + +Code Import and Code Generation +&umbrello; is a &UML; modelling tool, and as such its main purpose is to help you in the analysis and design of your systems. However, to make the transition between your design and your implementation, &umbrello; allows you to generate source code in different programming languages to get you started. Also, if you want to start using &UML; in an already started C++ project, &umbrello; can help you create a model of your system from the source code by analysing your source code and importing the classes found in it. + +Code Generation +&umbrello; can generate source code for various programming languages based on your &UML; Model to help you get started with the implementation of your project. The code generated consists of the class declarations, with their methods and attributes so you can fill in the blanks by providing the functionality of your classes' operations. +&umbrello; 1.2 comes with code generation support for ActionScript, Ada, C++, CORBA IDL, &Java;, JavaScript, PHP, Perl, Python, SQL and XMLSchema. + +Generating Code +In order to generate code with &umbrello;, you first need to create or load a Model containing at least one class. When you are ready to start writing some code, select the Code Generation Wizard entry from the Code menu to start a wizard which will guide you through the code generation process. +The first step is to select the classes for which you want to generate source code. By default all the classes of your model are selected, and you can remove the ones for which you do not want to generate code by moving them to the left-hand side list. +The next step of the wizard allows you to modify the parameters the Code Generator uses while writing your code. The following options are available: + + +Code Generation Options + + + + + + Options for the Code Generation in &umbrello; + + + Options for the Code Generation in &umbrello; + + + + + +Generation Options + + + +Code Verbosity +The option Write documentation comments even if empty instructs the Code Generator to write comments of the /** blah */ style even if the comment blocks are empty. If you added documentation to your classes, methods or attributes in your Model, the Code Generator will write these comments as Doxygen documentation regardless of what you set here, but if you select this option &umbrello; will write comment blocks for all classes, methods and attributes even if there is no documentation in the Model, in which case you should document your classes later directly in the source code. +Write comments for sections even if section is empty causes &umbrello; to write comments in the source code to delimit the different sections of a class. For example public methods or Attributes before the corresponding sections. If you select this option &umbrello; will write comments for all sections of the class even if the section is empty. For example, it would write a comment saying protected methods even if there are no protected methods in your class. + + +Folders +Write all generated files to folder. Here you should select the folder where you want &umbrello; to put the generated sources. +The Include heading files from folder option allows you to insert a heading at the beginning of each generated file. Heading files can contain copyright or licensing information and contain variables that are evaluated at generation time. You can take a look at the template heading files shipped with &umbrello; to see how to use this variables for replacing your name or the current date at generation time. + + +Overwrite Policy + +This option tells &umbrello; what to do if the file it wants to create already exists in the destination folder. &umbrello; cannot modify existing source files, so you have to choose between overwriting the existing file, skipping the generation of that particular file or letting &umbrello; choose a different file name. If you choose the option to use a different name, &umbrello; will add a suffix to the file name. + + +Language +&umbrello; will by default generate code in the language you have selected as Active Language, but with the Code Generation Wizard you have the option to change this to another language. + + + +Generation Wizard Generation +The third and last step of the wizard shows the status of the Code Generation process. You need only to click on the Generate button to get your classes written for you. +Note that the Options you select during the Code Generation Wizard are only valid for the current generation. The next time you run the wizard you will need to re-select all the options (your headings folder, overwrite policy, and so on). You can set the defaults used by &umbrello; in the Code Generation section of the &umbrello; settings, available at SettingsConfigure &umbrello;... +If you have set your Code Generation options to the right settings and want to generate some code right away without going through the wizard, you can select the entire Generate All Code from the Code menu. This will generate code for all the classes in your Model using the current settings (including Output Folder and Overwrite Policy, so use with care). + + + + +Code Import +&umbrello; can import source code from your existing projects to help you build Model of your systems. &umbrello; 1.2 supports only C++ source code, but other languages should be available in future versions. +To import classes into your Model, select the entry Import Classes... from the Code menu. In the file dialogue select the files containing the C++ class declarations and press OK. The classes will be imported and you will find them as part of your Model in the Tree View. Note that &umbrello; will not create any kind of Diagram for showing your classes, they will only be imported into your Model so that you can use them later in any diagram you want. + + +Code Import + + + + + + Menu for importing source code in &umbrello; + + + Menu for importing source code in &umbrello; + + + + + + diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/credits.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/credits.docbook new file mode 100644 index 00000000000..b8a1c5500d9 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/credits.docbook @@ -0,0 +1,11 @@ + +Copyright + +Copyright 2001, Paul Hensgen +Copyright 2002, 2003 The &umbrello; Authors. See http://uml.sf.net/developers.php for more information +&underFDL; &underGPL; diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/index.cache.bz2 b/tde-i18n-en_GB/docs/kdesdk/umbrello/index.cache.bz2 new file mode 100644 index 00000000000..39ea2b59ad9 Binary files /dev/null and b/tde-i18n-en_GB/docs/kdesdk/umbrello/index.cache.bz2 differ diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/index.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/index.docbook new file mode 100644 index 00000000000..a6a3e4f2e59 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/index.docbook @@ -0,0 +1,85 @@ + +Umbrello &UML; Modeller"> + + + UML"> + + + + + + + + + + +]> + + + +&umbrello; Handbook + + +&umbrello; Authors + + + +2001 +Paul Hensgen + + +2002, 2003 +&umbrello; Authors + + + +2003-10-15 +1.2 + + +&umbrello; helps the software development process by using the industry standard Unified Modelling Language (&UML;) to enable you to create diagrams for designing and documenting your systems. + + + +KDE +UML +modelling +diagrams +software development +development + + + + +&introduction-chapter; +¨-basics-chapter; +&working-with-umbrello-chapter; +&code-import-and-generation-chapter; +&other-features-chapter; +&authors-chapter; +&credits-chapter; + + diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/introduction.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/introduction.docbook new file mode 100644 index 00000000000..1869425cc45 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/introduction.docbook @@ -0,0 +1,57 @@ + +Introduction + +&umbrello; is a &UML; diagram tool that can support you in the software development process. Especially during the analysis and design phases of this process, &umbrello; will help you to get a high quality product. &UML; can also be used to document your software designs to help you and your fellow developers. +Having a good model of your software is the best way to communicate with other developers working on the project and with your customers. A good model is extremely important for medium and big-size projects, but it is also very useful for small ones. Even if you are working on a small one man project you will benefit from a good model because it will give you an overview that will help you code things right the first time. +&UML; is the diagramming language used to describing such models. You can represent your ideas in &UML; using different types of diagrams. &umbrello; 1.2 supports the following types: + +Class Diagram +Sequence Diagram +Collaboration Diagram +Use Case Diagram +State Diagram +Activity Diagram +Component Diagram +Deployment Diagram + +More information about &UML; can be found at the website of OMG, http://www.omg.org who create the &UML; standard. +We hope you enjoy &umbrello; and that it helps you create high quality software. &umbrello; is Free Software and available at no cost, the only thing we ask from you is to report any bugs, problems, or suggestions to the &umbrello; developers at uml-devel@lists.sourceforge.net or http://bugs.kde.org. + diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/other_features.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/other_features.docbook new file mode 100644 index 00000000000..20fcfd9f765 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/other_features.docbook @@ -0,0 +1,76 @@ + +Other Features + +Other &umbrello; Features +This chapter will briefly explain some other features &umbrello; offers you. + +Copying objects as PNG images +Apart from offering you the normal copy, cut and paste functionality that you would expect to copy objects between different diagrams, &umbrello; can copy the objects as PNG pictures so that you can insert them into any other type of document. You do not need to do anything special to use this feature, just select an object from a diagram (Class, Actor, &etc;) and copy it (&Ctrl;C, or using the menu), then open a &kword; document (or any program into which you can paste images) and select Paste. This is a great feature to export parts of your diagram as simple pictures. + + +Exporting to an Image +You can also export a complete diagram as an image. The only thing you need to do is select the diagram you want to export, and then the option Export as Picture... from the Diagram menu. + + +Printing +&umbrello; allows you to print individual diagrams. Press the Print button on the application toolbar or selecting the Print option from the File menu will give you a standard &kde; Print dialogue from where you can print your diagrams. + + +Logical Folders +To better organise your model, especially for larger projects, you can create logical folders in the Tree View. Just select the option NewFolder from the context menu of the default folders in the Tree View to create them. Folders can be nested, and you can move objects around by dragging them from one folder and dropping them into another. + + +Organising your Model with Folders + + + + + + Organising a Model with Logical Folders in &umbrello; + + + Organising a Model with Logical Folders in &umbrello; + + + + + + + diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/uml_basics.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/uml_basics.docbook new file mode 100644 index 00000000000..dffaa498a57 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/uml_basics.docbook @@ -0,0 +1,782 @@ + +&UML; Basics + +About &UML; +This chapter will give you a quick overview of the basics of &UML;. Keep in mind that this is not a comprehensive tutorial on &UML; but rather a brief introduction to &UML; which can be read as a &UML; tutorial. If you would like to learn more about the Unified Modelling Language, or in general about software analysis and design, refer to one of the many books available on the topic. There are also a lot of tutorials on the Internet which you can take as a starting point. + +The Unified Modelling Language (&UML;) is a diagramming language or notation to specify, visualise and document models of Object Orientated software systems. &UML; is not a development method, that means it does not tell you what to do first and what to do next or how to design your system, but it helps you to visualise your design and communicate with others. &UML; is controlled by the Object Management Group (OMG) and is the industry standard for graphically describing software. +&UML; is designed for Object Orientated software design and has limited use for other programming paradigms. +&UML; is composed of many model elements that represent the different parts of a software system. The &UML; elements are used to create diagrams, which represent a certain part, or a point of view of the system. The following types of diagrams are supported by &umbrello;: + + + +Use Case Diagrams show actors (people or other users of the system), use cases (the scenarios when they use the system), and their relationships + +Class Diagrams show classes and the relationships between them + +Sequence Diagrams show objects and a sequence of method calls they make to other objects. + +Collaboration Diagrams show objects and their relationship, putting emphasis on the objects that participate in the message exchange + + +State Diagrams show states, state changes and events in an object or a part of the system + +Activity Diagrams show activities and the changes from one activity to another with the events occurring in some part of the system + +Component Diagrams show the high level programming components (such as KParts or Java Beans). + +Deployment Diagrams show the instances of the components and their relationships. + + + + + + +&UML; Elements + +Use Case Diagram +Use Case Diagrams describe the relationships and dependencies between a group of Use Cases and the Actors participating in the process. +It is important to notice that Use Case Diagrams are not suited to represent the design, and cannot describe the internals of a system. Use Case Diagrams are meant to facilitate the communication with the future users of the system, and with the customer, and are specially helpful to determine the required features the system is to have. Use Case Diagrams tell, what the system should do but do not — and cannot — specify how this is to be achieved. + + +An example Use Case diagram. + + + + + + &umbrello; showing a Use Case Diagram + + + &umbrello; showing a Use Case Diagram + + + + + +Use Case +A Use Case describes — from the point of view of the actors — a group of activities in a system that produces a concrete, tangible result. +Use Cases are descriptions of the typical interactions between the users of a system and the system itself. They represent the external interface of the system and specify a form of requirements of what the system has to do (remember, only what, not how). +When working with Use Cases, it is important to remember some simple rules: + Each Use Case is related to at least one actor + Each Use Case has an initiator (&ie; an actor) + Each Use Case leads to a relevant result (a result with business value) + + + +Use Cases can also have relationships with other Use Cases. The three most typical types of relationships between Use Cases are: + +<<include>> which specifies that a Use Case takes place inside another Use Case +<<extends>> which specifies that in certain situations, or at some point (called an extension point) a Use Case will be extended by another. +Generalisation specifies that a Use Case inherits the characteristics of the Super-Use Case, and can override some of them or add new ones in a similar way as the inheritance between classes. + + + + +Actor +An actor is an external entity (outside of the system) that interacts with the system by participating (and often initiating) a Use Case. Actors can be in real life people (for example users of the system), other computer systems or external events. +Actors do not represent the physical people or systems, but their role. This means that when a person interacts with the system in different ways (assuming different roles) he will be represented by several actors. For example a person that gives customer support by the telephone and takes orders from the customer into the system would be represented by an actor Support Staff and an actor Sales Representative + + +Use Case Description +Use Case Descriptions are textual narratives of the Use Case. They usually take the form of a note or a document that is somehow linked to the Use Case, and explains the processes or activities that take place in the Use Case. + + + + +Class Diagram +Class Diagrams show the different classes that make up a system and how they relate to each other. Class Diagrams are said to be static diagrams because they show the classes, along with their methods and attributes as well as the static relationships between them: which classes know about which classes or which classes are part of another class, but do not show the method calls between them. + + +An example of a Class Diagram + + + + + + &umbrello; showing a Class Diagram + + + &umbrello; showing a Class Diagram + + + + + +Class +A Class defines the attributes and the methods of a set of objects. All objects of this class (instances of this class) share the same behaviour, and have the same set of attributes (each object has its own set). The term Type is sometimes used instead of Class, but it is important to mention that these two are not the same, and Type is a more general term. +In &UML;, Classes are represented by rectangles, with the name of the class, and can also show the attributes and operations of the class in two other compartments inside the rectangle. + + +A Class in &UML; + + + + + + Visual representation of a Class in &UML; + + + Visual representation of a Class in &UML; + + + + + +Attributes +In &UML;, Attributes are shown with at least their name, and can also show their type, initial value and other properties. Attributes can also be displayed with their visibility: + ++ Stands for public attributes +# Stands for protected attributes +- Stands for private attributes + + + +Operations +Operations (methods) are also displayed with at least their name, and can also show their parameters and return types. Operations can, just as Attributes, display their visibility: ++ Stands for public operations +# Stands for protected operations +- Stands for private operations + + + + + +Templates +Classes can have templates, a value which is used for an unspecified class or type. The template type is specified when a class is initiated (&ie; an object is created). Templates exist in modern C++ and will be introduced in Java 1.5 where they will be called Generics. + + + + +Class Associations +Classes can relate (be associated with) to each other in different ways: + +Generalisation +Inheritance is one of the fundamental concepts of Object Orientated programming, in which a class gains all of the attributes and operations of the class it inherits from, and can override/modify some of them, as well as add more attributes and operations of its own. +In &UML;, a Generalisation association between two classes puts them in a hierarchy representing the concept of inheritance of a derived class from a base class. In &UML;, Generalisations are represented by a line connecting the two classes, with an arrow on the side of the base class. +Generalisation + + + + + + Visual representation of a generalisation in &UML; + + + Visual representation of a generalisation in &UML; + + + + + + + +Associations +An association represents a relationship between classes, and gives the common semantics and structure for many types of connections between objects. +Associations are the mechanism that allows objects to communicate to each other. It describes the connection between different classes (the connection between the actual objects is called object connection, or link. +Associations can have a role that specifies the purpose of the association and can be uni- or bidirectional (indicates if the two objects participating in the relationship can send messages to the other, of if only one of them knows about the other). Each end of the association also has a multiplicity value, which dictates how many objects on this side of the association can relate to one object on the other side. +In &UML;, associations are represented as lines connecting the classes participating in the relationship, and can also show the role and the multiplicity of each of the participants. Multiplicity is displayed as a range [min..max] of non-negative values, with a star (*) on the maximum side representing infinite. +&UML; Association + + + + + + Visual representation of an Association in &UML; + + + Visual representation of an Association in &UML; + + + + + + + +Aggregation +Aggregations are a special type of associations in which the two participating classes don't have an equal status, but make a whole-part relationship. An Aggregation describes how the class that takes the role of the whole, is composed (has) of other classes, which take the role of the parts. For Aggregations, the class acting as the whole always has a multiplicity of one. +In &UML;, Aggregations are represented by an association that shows a rhomb on the side of the whole. +Aggregation + + + + + + Visual representation of an Aggregation relationship in &UML; + + + Visual representation of an Aggregation relationship in &UML; + + + + + + +Composition +Compositions are associations that represent very strong aggregations. This means, Compositions form whole-part relationships as well, but the relationship is so strong that the parts cannot exist on its own. They exist only inside the whole, and if the whole is destroyed the parts die too. +In &UML;, Compositions are represented by a solid rhomb on the side of the whole. + +Composition + + + + + + Visual representation of a Composition relationship in &UML; + + + + + + + +Other Class Diagram Items +Class diagrams can contain several other items besides classes. + +Interfaces +Interfaces are abstract classes which means instances can not be directly created of them. They can contain operations but no attributes. Classes can inherit from interfaces (through a realisation association) and instances can then be made of these classes. + + + +Datatypes +Datatypes are primitives which are typically built into a programming language. Common examples include integers and booleans. They can not have relationships to classes but classes can have relationships to them. + + + +Enums +Enums are a simple list of values. A typical example is an enum for days of the week. The options of an enum are called Enum Literals. Like datatypes they can not have relationships to classes but classes can have relationships to them. + + + +Packages +Packages represent a namespace in a programming language. In a diagram they are used to represent parts of a system which contain more than one class, maybe hundreds of classes. + + + + + + + +Sequence Diagrams + +Sequence Diagrams show the message exchange (&ie; method call) between several Objects in a specific time-delimited situation. Objects are instances of classes. Sequence Diagrams put special emphasis in the order and the times in which the messages to the objects are sent. + +In Sequence Diagrams objects are represented through vertical dashed lines, with the name of the Object on the top. The time axis is also vertical, increasing downwards, so that messages are sent from one Object to another in the form of arrows with the operation name and optionally the actual parameter values. + + + +Sequence Diagram + + + + + + &umbrello; showing a Sequence Diagram + + + &umbrello; showing a Sequence Diagram + + + + +Messages can be either synchronous, the normal type of message call where control is passed to the called object until that method has finished running, or asynchronous where control is passed back directly to the calling object. Synchronous messages have a vertical box on the side of the called object to show the flow of program control. + + + +Collaboration Diagrams + +Collaboration Diagrams show the interactions occurring between the objects participating in a specific situation. This is more or less the same information shown by Sequence Diagrams but there the emphasis is put on how the interactions occur in time while the Collaboration Diagrams put the relationships between the objects and their topology in the foreground. + +In Collaboration Diagrams messages sent from one object to another are represented by arrows, showing the message name, parameters, and the sequence of the message. Collaboration Diagrams are specially well suited to showing a specific program flow or situation and are one of the best diagram types to quickly demonstrate or explain one process in the program logic. + + +Collaboration + + + + + + &umbrello; showing a Collaboration Diagram + + + &umbrello; showing a Collaboration Diagram + + + + + + + +State Diagram +State Diagrams show the different states of an Object during its life and the stimuli that cause the Object to change its state. +State Diagrams exhibit Objects as state machines or finite automata that can be in one of a finite set of states and that can change its state via one of a finite set of stimuli. For example an Object of type NetServer can be in one of following states during its life: + +Ready +Listening +Working +Stopped + +and the events that can cause the Object to change states are + +Object is created +Object receives message listen +A Client requests a connection over the network +A Client terminates a request +The request is executed and terminated +Object receives message stop +etc + + + +State Diagram + + + + + + &umbrello; showing a State Diagram + + + &umbrello; showing a State Diagram + + + + + +State +States are the building block of State Diagrams. A State belongs to exactly one class and represents a summary of the values the attributes of a class can take. A &UML; State describes the internal state of an object of one particular class. +Note that not every change in one of the attributes of an object should be represented by a State but only those changes that can significantly affect the workings of the object. +There are two special types of States: Start and End. They are special in that there is no event that can cause an Object to return to its Start state, in the same way as there is no event that can possibly take an Object out of its End state once it has reached it. + + + + + +Activity Diagram +Activity Diagrams describe the sequence of activities in a system with the help of Activities. Activity Diagrams are a special form of State Diagrams, that only (or mostly) contains Activities. + + +An example Activity Diagram. + + + + + + &umbrello; showing an Activity Diagram + + + &umbrello; showing an Activity Diagram + + + + +Activity Diagrams are similar to procedural Flux Diagrams, with the difference that all Activities are clearly attached to Objects. + +Activity Diagrams are always associated to a Class, an Operation or a Use Case. + +Activity Diagrams support sequential as well as parallel Activities. Parallel execution is represented via Fork/Wait icons, and for the Activities running in parallel, it is not important the order in which they are carried out (they can be executed at the same time or one after the other) + +Activity +An Activity is a single step in a process. One Activity is one state in the system with internal activity and, at least, one outgoing transition. Activities can also have more than one outgoing transition if they have different conditions. +Activities can form hierarchies, this means that an Activity can be composed of several detail Activities, in which case the incoming and outgoing transitions should match the incoming and outgoing transitions of the detail diagram. + + + + + +Helper Elements +There are a few elements in &UML; that have no real semantic value for the model, but help to clarify parts of the diagram. These elements are + +Text lines +Text Notes and anchors +Boxes + +Text lines are useful to add short text information to a diagram. It is free-standing text and has no meaning to the Model itself. + +Notes are useful to add more detailed information about an object or a specific situation. They have the great advantage that notes can be anchored to &UML; Elements to show that the note belongs to a specific object or situation. + +Boxes are free-standing rectangles which can be used to group items together to make diagrams more readable. They have no logical meaning in the model. + + + + + +Component Diagrams +Component Diagrams show the software components (either component technologies such as KParts, CORBA components or Java Beans or just sections of the system which are clearly distinguishable) and the artefacts they are made out of such as source code files, programming libraries or relational database tables. + +Components can have interfaces (&ie; abstract classes with operations) that allow associations between components. + + + +Deployment Diagrams + +Deployment diagrams show the runtime component instances and their associations. They include Nodes which are physical resources, typically a single computer. They also show interfaces and objects (class instances). + + + + + diff --git a/tde-i18n-en_GB/docs/kdesdk/umbrello/working_with_umbrello.docbook b/tde-i18n-en_GB/docs/kdesdk/umbrello/working_with_umbrello.docbook new file mode 100644 index 00000000000..ffa6cbf2bf7 --- /dev/null +++ b/tde-i18n-en_GB/docs/kdesdk/umbrello/working_with_umbrello.docbook @@ -0,0 +1,413 @@ + +Working with &umbrello; + + +This chapter will introduce you to &umbrello;'s user interface and will tell you all you need to know to start modelling. All actions in &umbrello; are accessible via the menu and the toolbars, but &umbrello; also makes extensive use of &RMB; context menus. You can &RMB; click on almost any element in &umbrello;'s work area or tree view to get a menu with the most useful functions that can be applied to the particular element you are working on. Some users find this a little confusing at the beginning because they are more used to working with the menu or tool bars, but once you get used to right clicking it will greatly speed up your work. + + +User Interface +&umbrello;'s main window is divided in three areas that will help you keep an overview of your entire system and access the different diagrams quickly while working on your model. +These areas are called: + +Tree View +Work Area +Documentation Window + + + +&umbrello;'s User Interface + + + + + + &umbrello;'s User Interface + + + &umbrello;'s User Interface + + + + + +Tree View +The Tree View is usually located on the top left hand side of the window and shows all the diagrams, classes, actors and use cases that build up your model. The Tree View allows you to have a quick overview of the elements composing your model. The Tree View also gives you a quick way to switch between the different diagrams in your model and inserting elements from your model into the current diagram. +If you are working on a model with more than just a few classes and diagrams, the Tree View may help you stay on top of things by organising your model elements in folders. You can create folders by selecting the appropriate option from the context menu (&RMB; click on one of the folders in the tree view) and you can organise your elements by moving them to the appropriate folder (drag and drop) + + + +Documentation Window +The Documentation Window is the small window located on the left bottom of &umbrello;, and it gives you a quick preview of the documentation for the currently selected item. The Documentation Window is rather small because it is intended to allow you just a quick pick into the element's documentation while taking as little screen space as possible. If you need to view the documentation in more detail you can always open the item's properties. + + +Work Area +The Work Area is the main window in &umbrello; and is where the real action takes place. You use the Work Area to edit and view the diagrams in your model. The Work Area shows the currently active diagram. Currently only one diagram can be shown on the Work Area at any time. + + + +Creating, Loading and Saving Models +The first thing you need to start doing something useful with &umbrello; is to create a model to work on. When you start &umbrello; it always loads the last used model or creates a new, empty model (depending on your preferences set in the configuration dialogue). This will allow you to start working right away. + +New Model +If at any time you need to create a new model you can do this by selecting the New entry from the File menu, or by clicking on the New icon from the application toolbar. If you are currently working on a model which has been modified &umbrello; will ask you if it should save your changes before loading the new model. + + +Save Model +You can save your model at any time by selecting the option Save from the File Menu or by clicking on the Save button from the application toolbar. If you need to save your model under a different name you can use the option Save As from the File Menu. +For your convenience &umbrello; also offers you the option to automatically save your work each certain time period. You can configure if you want this option as well as the time intervals in the Settings from &umbrello; + + +Load Model +For loading an already existing model you may select the option Open from the File Menu or click on the Open icon from the application toolbar. The most recently used models are also available under the submenu Open Recent in the File Menu to speed up access to your most frequently used models. +&umbrello; can only work on one model at a time, so if you ask the program to load a model for you and your current model has been modified since the last time you save it, &umbrello; will ask you whether your changes should be saved to prevent any loss of work. You can start two or more instances of &umbrello; at any one time, you can also copy and paste between instances. + + + +Editing Models +In &umbrello;, there are basically two ways for editing the elements in your model. +Edit model elements directly through the Tree View +Edit model elements through a Diagram + + +Using the context menu of the different items in the Tree View you are able to add, remove, and modify almost all the elements in your model. Right clicking on the folders in the Tree View will give you options for creating the different types of diagrams as well as, depending on whether the folder is a Use Case View or a Logical View, Actors, Use Cases, Classes, etc. +Once you have added elements to your model you can also edit an element by accessing its properties dialogue, which you find by selecting the option Properties from the context menu shown when right clicking on the items in the Tree View. +You can also edit your model by creating or modifying elements through diagrams. More details on how to do this are given in the following sections. + + +Adding and Removing Diagrams +Your &UML; model consists of a set of &UML; elements and associations between them. However you cannot see the model directly, you use Diagrams to look at it. + +Creating Diagrams +To create a new diagram in your model simply select the diagram type you need from the New submenu in the Diagram menu and give a name to it. The diagram will be created and made active, and you will immediately see it in the tree view. +Remember that &umbrello; makes extensive use of context menus: you can also &RMB; click on a folder in the Tree View and select the appropriate diagram type from the New submenu in the context menu. Note that you can create Use Case Diagrams only in Use Case View folders, and the other types of diagram can only be created in the Logical View folders. + + +Removing Diagrams +Should you need to remove a diagram from your model, you can do this by making it active and selecting Delete from the Diagram Menu. You can also achieve this by selecting Delete from the diagrams context menu in the Tree View +Since deleting a diagram is something serious that could cause loss of work if done by accident, &umbrello; will ask you to confirm the delete operation before actually removing the Diagram. Once a diagram has been deleted and the file has been saved there is no way to undo this action. + + +Renaming Diagrams +If you want to change the name of an existing diagram you can easily do this by selecting the Rename option from its &RMB; menu in the Tree View. +Another way to rename a diagram is to do this via its properties dialogue, which you obtain by selecting Properties from its Context Menu or by double clicking on it in the Tree View. + + + +Editing Diagrams +When working on a diagram, &umbrello; will try to guide you by applying some simple rules as to which elements are valid in the different types of diagrams, as well as the relationships that can exist between them. If you are an &UML; expert you will probably not even notice it, but this will help &UML; novices create standard-conformant diagrams. +Once you have created your diagrams it is time to start editing them. Here you should notice the (for beginners subtle) difference between editing your diagram, and editing the model. As you already know, Diagrams are views of your model. For example, if you create a class by editing a Class Diagram, you are really editing both, your Diagram and your model. If you change the colour or other display options of a Class in your Class Diagram, you are only editing the Diagram, but nothing is changed in your model. + +Insert Elements +One of the first things you will do when editing a new diagram is to insert elements into them (Classes, Actors, Use Cases, &etc;) There is basically two ways of doing this: + +Dragging existing elements in your model from the Tree View +Creating new elements in your model and adding them to your diagram at the same time, by using one of the edit Tools in the Work Toolbar + +To insert elements that already exist in your model, just drag them from the Tree View and drop them where you want them to be in your diagram. You can always move elements around in your Diagram using the Select Tool +The second way of adding elements to your diagram is by using the Work Toolbar's edit tools (note that this will also add the elements to your model). +The Work Toolbar was by default located on the far right of the application window, &umbrello; 1.2 has moved this to the top of the window. You can dock it into other edge or have it floating around if you prefer. The tools available on this toolbar (the buttons you see on it) change depending on the type of diagram you are currently working on. The button for the currently selected tool is activated in the toolbar. You can switch to the select tool by pressing the &Esc; key. +When you have selected an edit tool from the Work Toolbar (for example, the tool to insert classes) the mouse pointer changes to a cross, and you can insert the elements in your model by single clicking in your diagram. Note that elements in &UML; must have a Unique Name. So that if you have a class in one diagram whose name is ClassA and then you use the insert Class tool to insert a class into another diagram you cannot name this new class ClassA as well. If these two are supposed to be two different elements, you have to give them a unique name. If you are trying to add the same element to your diagram, then the Insert Class is not the right tool for that. You should drag and drop the class from the Tree View instead. + + +Deleting Elements +You can delete any element by selecting the option Delete from its context menu. +Again, there is a big difference between removing an object from a diagram, and deleting an object from your model: If you delete an object from within a diagram, you are only removing the object from that particular diagram: the element will still be part of your model and if there are other diagrams using the same element they will not suffer any change. If, on the other hand, you delete the element from the Tree View, you are actually deleting the element from your model. Since the element no longer exist in your model, it will be automatically removed from all the diagrams it appears in. + + +Editing Elements +You can edit most of the &UML; elements in your model and diagrams by opening its Properties dialogue and selecting the appropriate options. To edit the properties of an object, select Properties from its context menu (&RMB; click). Each element has a dialogue consisting of several pages where you can configure the options corresponding to that element. For some elements, like actors you can only set a couple of options, like the object name and documentation, while for other elements, like classes, you can edit its attributes and operations, select what you want to be shown in the diagram (whole operation signature or just operation names, etc) and even the colours you want to use for the line and fill of the class' representation on the diagram. + +For most &UML; elements you can also open the properties dialogue by double clicking on it if you are using the selection tool (arrow). The exception to this is Associations, in which case a double click creates an anchor point. For associations you need to use the &RMB; context menu to get the properties dialogue. + +Note that you can also select the properties option from the context menu of the elements in the Tree View. This allows you to also edit the properties for the diagrams, like setting whether the grid should be shown or not. + + +Editing Classes +Even though editing the properties of all objects was already covered in the previous section, classes deserve a special section because they are a bit more complicated and have more options than most of the other &UML; elements. +In the properties dialogue for a class you can set everything, from the colour it uses to the operations and attributes it has. + +Class General Settings +The General Settings page of the properties dialogue is self-explanatory. Here you can change the class' name, visibility, documentation, &etc; This page is always available. + + +Class Attribute Settings +In the Attributes Settings page you can add, edit, or delete attributes (variables) of the class. You can move attributes up and down the list by pressing the arrow button on the side. This page is always available. + + +Class Operations Settings +Similar to the Attribute Settings Page, in the Operation Settings Page you can add, edit, or remove operations for your class. When adding or editing an operation, you enter the basic data in the Operation Properties dialogue. If you want to add parameters to your operation you need to click the New Parameter button, which will show the Parameter Properties dialogue. This page is always available + + +Class Template Settings +This page allows you to add class templates which are unspecified classes or datatypes. In Java 1.5 these will be called Generics. + + +Class Associations Page +The Class Associations page shows all the associations of this class in the current diagram. Double clicking on an association shows its properties, and depending on the type of association you may modify some parameters here such as setting multiplicity and Role name. If the association does not allow such options be be modified, the Association Properties dialogue is read-only and you can only modify the documentation associated with this association. +This page is only available if you open the Class Properties from within a diagram. If you select the class properties from the context menu in the Tree View this page is not available. + + +Class Display Page +In the Display Options page, you can set what is to be shown in the diagram. A class can be shown as only one rectangle with the class name in it (useful if you have many classes in your diagram, or are for the moment not interested in the details of each class) or as complete as showing packages, stereotypes, and attributes and operations with full signature and visibility +Depending on the amount of information you want to see you can select the corresponding options in this page. The changes you make here are only display options for the diagram. This means that hiding a class' operations only makes them not to be shown in the diagram, but the operations are still there as part of your model. This option is only available if you select the class properties from within a Diagram. If you open the class properties from the Tree View this page is missing since such Display Options do not make sense in that case + + +Class Colour Page +In the Widget Colour page you can configure the colours you want for the line and the fill of the widget. This option obviously makes sense only for classes displayed in diagrams, and is missing if you open the class' properties dialogue from the Tree View. + + + + +Associations +Associations relate two &UML; objects to each other. Normally associations are defined between two classes, but some types of associations can also exist between use cases and actors. +To create an association select the appropriate tool from the Work Toolbar (generic Association, Generalization, Aggregation, &etc;) and single click on the first element participating in the association and then single click on the second item participating. Note that those are two clicks, one on each of the objects participating in the association, it is not a drag from one object to the other. +If you try to use an association in a way against the &UML; specification &umbrello; will refuse to create the association and you will get an error message. This would be the case if, for example, a Generalisation exists from class A to class B and then you try to create another Generalisation from Class B to class A +Right clicking on an association will show a context menu with the actions you can apply on it. If you need to delete an association simply select the Delete option from this context menu. You can also select the Properties option and, depending on the association type edit attributes such as roles and multiplicity. + +Anchor Points +Associations are drawn, by default, as a straight line connecting the two objects in the diagram. +You can add anchor points to bend an association by double clicking some where along the association line. This will insert an anchor point (displayed as a blue point when the association line is selected) which you can move around to give shape to the association +If you need to remove an anchor point, double click on it again to remove it +Note that the only way to edit the properties of an association is through the context menu. If you try to double click on it as with other &UML; objects, this will only insert an anchor point. + + + + +Notes, Text and Boxes +Notes, Lines Of Text and Boxes are elements that can be present in any type of diagram and have no real semantic value, but are very helpful to add extra comments or explanations that can make your diagram easier to understand. +To add a Note or a Line Of Text, select the corresponding tool from the Work Toolbar and single click on the diagram where you want to put your comment. You can edit the text by opening the element through its context menu or in the case of notes by double clicking on them as well. + +Anchors +Anchors are used to link a text note and another &UML; Element together. For example, you normally use a text note to explain or make some comment about a class or a particular association, in which case you can use the anchor to make it clear that the note belongs to that particular element. +To add an anchor between a note and another &UML; element, use the anchor tool from the work toolbar. You first need to click on the note and then click on the &UML; element you want the note to be linked to. + + + + + -- cgit v1.2.1