From ff4fa4a4bcbcb8f46cd9231b0a5f3b3d19f5989c Mon Sep 17 00:00:00 2001
From: Automated System %2 %2 Use this combo box to select the printer to which you want to print. "
-"Initially (if you run TDEPrint for the first time), you may only find the "
-"TDE special printers (which save jobs to disk [as PostScript- or "
-"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing "
-"a real printer, you need to... "
-" Note: It may happen that you successfully connected to a remote CUPS "
-"server and still do not get a printer list. If this happens: force TDEPrint to "
-"re-load its configuration files. To reload the configuration files, either "
-"start kprinter again, or use the switch the print system away from CUPS and "
-"back again once. The print system switch can be made through a selection in "
-"the drop-down menu at bottom of this dialog when fully expanded). This button opens a dialog where you can make decisions regarding all "
-"supported print job options. This button reduces the list of visible printers to a shorter, more "
-"convenient, pre-defined list. This is particularly useful in enterprise environments with lots of "
-"printers. The default is to show all printers. To create a personal 'selective view list', click on the "
-"'System Options' button at the bottom of this dialog. Then, in the new "
-"dialog, select 'Filter' (left column in the "
-"TDE Print Configuration dialog) and setup your selection.. Warning: Clicking this button without prior creation of a personal "
-"'selective view list' will make all printers dissappear from the "
-"view. (To re-enable all printers, just click this button again.) This button starts the TDE Add Printer Wizard. Use the Wizard (with \"CUPS\" or \"RLPR\""
-") to add locally defined printers to your system. Note: The TDE Add Printer Wizard does not "
-"work, and this button is disabled if you use \"Generic LPD\", "
-"\"LPRng\", or \"Print Through an External Program\".) Here you can enter any command that would also print for you in a "
-"konsole window. This button shows or hides additional printing options. This button starts a new dialog where you can adjust various settings of "
-"your printing system. Amongst them: "
-" \"General\" This dialog page contains general print job settings. General "
+"settings are applicable to most printers, most jobs and most job file types. "
+" To get more specific help, enable the \"WhatsThis\" cursor and click on any "
+"of the text labels or GUI elements of this dialog. Page size: Select paper size to be printed on from the drop-down "
+"menu. The exact list of choices depends on the printer driver (\"PPD\") you have "
+"installed. Additional hint for power users: This TDEPrint GUI element "
+"matches with the CUPS commandline job option parameter: "
+" "
-"
"
-"a2ps -P <printername> --medium=A3
. "
-"
"
-"and many more....
"
+"
"
+" -o PageSize=... # examples: \"A4\" or \"Letter\"
If you enable this checkbox, the printing dialog stays open after you hit " -"the Print button.
" -"This is especially useful, if you need to test various print settings (like " -"color matching for an inkjet printer) or if you want to send your job to " -"multiple printers (one after the other) to have it finished more quickly.
" -"Paper type: Select paper type to be printed on from the drop-down " +"menu.
" +"The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o MediaType=... # example: \"Transparency\"
Paper source: Select paper source tray for the paper to be printed on " +"from the drop-down menu. " +"
The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" " +"
Image Orientation: Orientation of the printed page image on your " +"paper is controlled by the radio buttons. By default, the orientation is " +"Portrait " +"
You can select 4 alternatives: " +"
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o orientation-requested=... # examples: \"landscape\" or " +"\"reverse-portrait\"
This button calls the \"File Open / Browse Directories\" dialog to allow you " -"to select a file for printing. Note, that " -"
Duplex Printing: These controls may be grayed out if your printer " +"does not support duplex printing (i.e. printing on both sides of the " +"sheet). These controls are active if your printer supports duplex printing. " +"
You can choose from 3 alternatives:
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" " +"
Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside TDE applications. If you start " -"kprinter from the commandline, or if you use kprinter as a print command for " -"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " -"preview is not available here.
Banner Page(s): Select banner(s) to print one or two special sheets " +"of paper just before or after your main job.
" +"Banners may contain some pieces of job information, such as user name, time " +"of printing, job title and more.
" +"Banner pages are useful to separate different jobs more easily, especially " +"in a multi-user environment.
" +"Hint: You can design your own banner pages. To make use of " +"them, just put the banner file into the standard CUPS banners " +"directory (This is usually \"/usr/share/cups/banner/\" " +"Your custom banner(s) must have one of the supported printable formats. " +"Supported formats are ASCII text, PostScript, PDF and nearly any image format " +"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " +"menu after a restart of CUPS.
" +"CUPS comes with a selection of banner pages.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-sheets=... # examples: \"standard\" or \"topsecret\" " +"
Note: (Button is only visible if the checkbox for " -"System Options --> General --> Miscellaneous: " -"\"Defaults to the last printer used in the application\" " -"is disabled.)
Pages per Sheet: You can choose to print more than one page onto " +"each sheet of paper. This is sometimes useful to save paper.
" +"Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"
Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. Be aware, that some printers can " +"by themselves print multiple pages per sheet. In this case you find the option " +"in the printer driver settings. Be careful: if you enable multiple pages per " +"sheet in both places, your printout will not look as you intended.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o number-up=... # examples: \"2\" or \"4\"
%2
" -msgstr "%1: संदेश के साथ कार्य असफल:%2
" +#: management/kxmlcommandselector.cpp:220 +msgid "Internal error. The XML driver for the command %1 could not be found." +msgstr "आंतरिक त्रुटि. कमांड %1 के लिए एक्सएमएल ड्राइवर नहीं मिल सका." -#: lpr/kmlprjobmanager.cpp:83 -msgid "Unsupported operation." -msgstr "असमर्थित ऑपरेशन." +#: management/kxmlcommandselector.cpp:238 +msgid "output" +msgstr "आउटपुट" -#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37 -msgid "Spooler" -msgstr "स्पूलर" +#: management/kxmlcommandselector.cpp:242 +msgid "undefined" +msgstr "अपारिभाषित" -#: lpr/kmconfiglpr.cpp:34 -msgid "Spooler Settings" -msgstr "स्पूलर विन्यास" +#: management/kxmlcommandselector.cpp:247 +msgid "not allowed" +msgstr "स्वीकार्य नहीं" -#: lpr/kmlprmanager.cpp:289 -msgid "The printcap file is a remote file (NIS). It cannot be written." -msgstr "प्रिंटकेप फ़ाइल रिमोट फ़ाइल है (एनआईएस) . यह लिखा नहीं जा सकता." +#: management/kxmlcommandselector.cpp:253 +msgid "(Unavailable: requirements not satisfied)" +msgstr "(अनुपलब्ध: आवश्यकताएँ संतुष्ट नहीं हैं)" -#: lpr/kmlprmanager.cpp:305 -msgid "" -"Unable to save printcap file. Check that you have write permissions for that " -"file." -msgstr "" -"प्रिंटकेप फ़ाइल सहेजा नहीं जा सकता. जाँचें कि आपके पास उक्त फ़ाइल के लिए लिखने " -"की अनुमति है." +#: management/kmwsmb.cpp:35 +msgid "SMB Printer Settings" +msgstr "एसएमबी प्रिंटर विन्यास" -#: lpr/kmlprmanager.cpp:330 -msgid "Internal error: no handler defined." -msgstr "आंतरिक त्रुटिः कोई हैंडलर पारिभाषित नहीं." +#: management/kmwsmb.cpp:41 +msgid "Scan" +msgstr "स्कैन" -#: lpr/kmlprmanager.cpp:344 -msgid "Couldn't determine spool directory. See options dialog." -msgstr "स्पूल डिरेक्ट्री निर्धारित नहीं कर सका. विकल्प संवाद देखें." +#: management/kmwsmb.cpp:42 +msgid "Abort" +msgstr "छोड़ें" -#: lpr/kmlprmanager.cpp:350 -msgid "" -"Unable to create the spool directory %1. Check that you have the required " -"permissions for that operation." -msgstr "" -"स्पूल डिरेक्ट्री %1 बनाने में अक्षम. जाँचें कि आपके पास उक्त कार्य के लिए " -"वांछित अनुमतियाँ हैं." +#: management/kmwsmb.cpp:44 +msgid "Workgroup:" +msgstr "वर्कग्रुपः" -#: lpr/kmlprmanager.cpp:382 -#, c-format -msgid "" -"The printer has been created but the print daemon could not be restarted. %1" -msgstr "" -"प्रिंटर बना दिया गया है, परंतु प्रिंट डेमन फिर से चालू नहीं किया जा सका. %1" +#: management/kmwsmb.cpp:45 +msgid "Server:" +msgstr "सर्वरः" -#: lpr/kmlprmanager.cpp:410 -msgid "" -"Unable to remove spool directory %1. Check that you have write permissions for " -"that directory." -msgstr "" -"स्पूल डिरेक्ट्री %1 मिटाने में अक्षम. जाँचें कि आपके पास उक्त डिरेक्ट्री के लिए " -"लिखने की अनुमतियाँ हैं." +#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99 +msgid "Printer:" +msgstr "प्रिंटरः" -#: lpr/kmlprmanager.cpp:458 -msgid "&Edit printcap Entry..." -msgstr "प्रिंटकेप प्रविष्टि का संपादन करें... (&E)" +#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 +msgid "Empty server name." +msgstr "सर्वर नाम खाली है." -#: lpr/kmlprmanager.cpp:473 -msgid "" -"Editing a printcap entry manually should only be done by confirmed system " -"administrator. This may prevent your printer from working. Do you want to " -"continue?" -msgstr "" +#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 +msgid "Empty printer name." +msgstr "खाली प्रिंटर नाम" -#: lpr/kmlprmanager.cpp:489 +#: management/kmwsmb.cpp:99 #, c-format -msgid "Spooler type: %1" -msgstr "स्पूलर क़िस्म: %1" +msgid "Login: %1" +msgstr "लॉगइनः %1" -#: lpr/matichandler.cpp:82 -msgid "Network printer" -msgstr "नेटवर्क प्रिंटर" +#: management/kmwsmb.cpp:99 +msgid "Characters Per Inch
" -"This setting controls the horizontal size of characters when printing a text " -"file.
" -"The default value is 10, meaning that the font is scaled in a way that 10 " -"characters per inch will be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o cpi=... # example: \"8\" or \"12\"
Lines Per Inch
" -"This setting controls the vertical size of characters when printing a text " -"file.
" -"The default value is 6, meaning that the font is scaled in a way that 6 " -"lines per inch will be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o lpi=... # example \"5\" or \"7\"
Columns
" -"This setting controls how many columns of text will be printed on each page " -"when. printing text files.
" -"The default value is 1, meaning that only one column of text per page will " -"be printed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o columns=... # example: \"2\" or \"4\"
Text Formats
" -"These settings control the appearance of text on printouts. They are only " -"valid for printing text files or input directly through kprinter.
" -"Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " -"Text Editor. (Applications in general send PostScript to the print system, and " -"'kate' in particular has its own knobs to control the print output.
. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o cpi=... # example: \"8\" or \"12\" " -"
-o lpi=... # example: \"5\" or \"7\" " -"
-o columns=... # example: \"2\" or \"4\"
Margins
" -"These settings control the margins of printouts on the paper. They are not " -"valid for jobs originating from applications which define their own page " -"layout internally and send PostScript to TDEPrint (such as KOffice or " -"OpenOffice.org).
" -"When printing from KDE applications, such as KMail and Konqueror, or " -"printing an ASCII text file through kprinter, you can choose your preferred " -"margin settings here.
" -"Margins may be set individually for each edge of the paper. The combo box at " -"the bottom lets you change the units of measurement between Pixels, " -"Millimeters, Centimeters, and Inches.
" -"You can even use the mouse to grab one margin and drag it to the intended " -"position (see the preview picture on the right side).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-top=... # example: \"72\" " -"
-o page-bottom=... # example: \"24\" " -"
-o page-left=... # example: \"36\" " -"
-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
" -"ASCII text file printouts can be 'prettyfied' by enabling this option. If " -"you do so, a header is printed at the top of each page. The header contains " -"the page number, job title (usually the filename), and the date. In addition, C " -"and C++ keywords are highlighted, and comment lines are italicized.
" -"This prettyprint option is handled by CUPS.
" -"If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=true.
This backend may require a login/password to work properly. Select the type " +"of access to use and fill in the login and password entries if needed.
" msgstr "" -#: cups/kptextpage.cpp:153 -msgid "" -"Turn Text Printing with Syntax Highlighting (Prettyprint) Off!
" -"ASCII text file printing with this option turned off are appearing without a " -"page header and without syntax highlighting. (You can still set the page " -"margins, though.)
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=false
Print Text with Syntax Highlighting (Prettyprint)
" -"ASCII file printouts can be 'prettyfied' by enabling this option. If you do " -"so, a header is printed at the top of each page. The header contains the page " -"number, job title (usually the filename), and the date. In addition, C and C++ " -"keywords are highlighted, and comment lines are italicized.
" -"This prettyprint option is handled by CUPS.
" -"If you prefer another 'plaintext-to-prettyprint' converter, look for the " -"enscript pre-filter on the Filters tab.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o prettyprint=true. " -"
-o prettyprint=false
The 'blackplot' option specifies that all pens should plot in black-only: " -"The default is to use the colors defined in the plot file, or the standard pen " -"colors defined in the HP-GL/2 reference manual from Hewlett Packard.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o blackplot=true
Now you can test the printer before finishing installation. Use the " +"Settings button to configure the printer driver and the Test " +"button to test your configuration. Use the Back " +"button to change the driver (your current configuration will be discarded).
" msgstr "" -#: cups/kphpgl2page.cpp:48 -msgid "" -"The 'fitplot' option specifies that the HP-GL image should be scaled to fill " -" exactly the page with the (elsewhere selected) media size.
" -"The default is 'fitplot is disabled'. The default will therefore use the " -"absolute distances specified in the plot file. (You should be aware that HP-GL " -"files are very often CAD drawings intended for large format plotters. On " -"standard office printers they will therefore lead to the drawing printout " -"being spread across multiple pages.)
" -"Note:This feature depends upon an accurate plot size (PS) command in " -"the HP-GL/2 file. If no plot size is given in the file the filter converting " -"the HP-GL to PostScript assumes the plot is ANSI E size.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o fitplot=true
%1
%1
The pen width value can be set here in case the original HP-GL file does not " -"have it set. The pen width specifies the value in micrometers. The default " -"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " -"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " -"wide.
" -"Note: The penwidth option set here is ignored if the pen widths are " -"set inside the plot file itself..
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o penwidth=... # example: \"2000\" or \"500\"
All options on this page are only applicable if you use TDEPrint to send " -"HP-GL and HP-GL/2 files to one of your printers.
" -"HP-GL and HP-GL/2 are page description languages developed by " -"Hewlett-Packard to drive Pen Plotting devices.
" -"TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " -"it on any installed printer.
" -"Note 1: To print HP-GL files, start 'kprinter' and simply load the " -"file into the running kprinter.
" -"Note 2: The 'fitplot' parameter provided on this dialog does also " -"work for printing PDF files (if your CUPS version is more recent than " -"1.1.22).
" -"Additional hint for power users: These TDEPrint GUI elements " -"match with CUPS commandline job option parameters: " -"
-o blackplot=... # examples: \"true\" or \"false\" " -"
-o fitplot=... # examples: \"true\" or \"false\" " -"
-o penwidth=... # examples: \"true\" or \"false\"
Print queue on remote CUPS server
" -"Use this for a print queue installed on a remote machine running a CUPS " -"server. This allows to use remote printers when CUPS browsing is turned off.
" -"Locally-connected printer
" +"Use this for a printer connected to the computer via a parallel, serial or " +"USB port.
" msgstr "" -#: cups/kmcupsuimanager.cpp:94 -msgid "" -"Network IPP printer
" -"Use this for a network-enabled printer using the IPP protocol. Modern " -"high-end printers can use this mode. Use this mode instead of TCP if your " -"printer can do both.
Fax/Modem printer
" -"Use this for a fax/modem printer. This requires the installation of the fax4CUPS " -"backend. Documents sent on this printer will be faxed to the given target fax " -"number.
Shared Windows printer
" +"Use this for a printer installed on a Windows server and shared on the " +"network using the SMB protocol (samba).
" msgstr "" -#: cups/kmcupsuimanager.cpp:108 +#: management/kmwbackend.cpp:130 +msgid "&Remote LPD queue" +msgstr "रिमोट एलपीडी क़तार (&R)" + +#: management/kmwbackend.cpp:131 msgid "" "Other printer
" -"Use this for any printer type. To use this option, you must know the URI of " -"the printer you want to install. Refer to the CUPS documentation for more " -"information about the printer URI. This option is mainly useful for printer " -"types using 3rd party backends not covered by the other possibilities.
Print queue on a remote LPD server
" +"Use this for a print queue existing on a remote machine running a LPD print " +"server.
" msgstr "" -#: cups/kmcupsuimanager.cpp:116 +#: management/kmwbackend.cpp:137 +msgid "Ne&twork printer (TCP)" +msgstr "नेटवर्क प्रिंटर (टीसीपी) (&t)" + +#: management/kmwbackend.cpp:138 msgid "" "Class of printers
" -"Use this to create a class of printers. When sending a document to a class, " -"the document is actually sent to the first available (idle) printer in the " -"class. Refer to the CUPS documentation for more information about class of " -"printers.
Network TCP printer
" +"Use this for a network-enabled printer using TCP (usually on port 9100) as " +"communication protocol. Most network printers can use this mode.
" msgstr "" -#: cups/kmcupsuimanager.cpp:129 -msgid "Re&mote CUPS server (IPP/HTTP)" -msgstr "रिमोट कप्स सर्वर (IPP/HTTP) (&m)" - -#: cups/kmcupsuimanager.cpp:130 -msgid "Network printer w/&IPP (IPP/HTTP)" -msgstr "नेटवर्क प्रिंटर w/&IPP (IPP/HTTP)" - -#: cups/kmcupsuimanager.cpp:131 -msgid "S&erial Fax/Modem printer" -msgstr "सीरियल फैक्स/मॉडम प्रिंटर (&e)" +#: management/kmwfile.cpp:35 +msgid "File Selection" +msgstr "फ़ाइल चयन" -#: cups/kmcupsuimanager.cpp:132 -msgid "Other &printer type" -msgstr "अन्य प्रिंटर क़िस्म (&p)" +#: management/kmwfile.cpp:41 +msgid "" +"The printing will be redirected to a file. Enter here the path of the file " +"you want to use for redirection. Use an absolute path or the browse button for " +"graphical selection.
" +msgstr "" -#: cups/kmcupsuimanager.cpp:134 -msgid "Cl&ass of printers" -msgstr "प्रिंटर के वर्ग (&a)" +#: management/kmwfile.cpp:44 +msgid "Print to file:" +msgstr "फ़ाइल में छापेंः" -#: cups/kmcupsuimanager.cpp:190 -msgid "An error occurred while retrieving the list of available backends:" -msgstr "उपलब्ध बैकएण्ड्स सूची निकालने के दौरान एक त्रुटि हुईः" +#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 +msgid "Empty file name." +msgstr "फ़ाइल नाम खाली है." -#: cups/kmcupsuimanager.cpp:236 -msgid "Priority" -msgstr "प्राथमिकता" +#: management/kmwfile.cpp:66 +msgid "Directory does not exist." +msgstr "डिरेक्ट्री अस्तित्व में नहीं है." -#: cups/kmcupsuimanager.cpp:238 -msgid "Billing Information" -msgstr "बिलिंग जानकारी" +#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107 +msgid "String" +msgstr "वाक्य(स्ट्रिंग)" -#: cups/kmconfigcupsdir.cpp:34 -msgid "Folder" -msgstr "फ़ोल्डर" +#: management/kxmlcommanddlg.cpp:108 +msgid "Integer" +msgstr "पूर्णांक" -#: cups/kmconfigcupsdir.cpp:35 -msgid "CUPS Folder Settings" -msgstr "कप्स (CUPS) फ़ोल्डर विन्यास" +#: management/kxmlcommanddlg.cpp:109 +msgid "Float" +msgstr "फ्लोट" -#: cups/kmconfigcupsdir.cpp:38 -msgid "Installation Folder" -msgstr "संस्थापन फ़ोल्डर" +#: management/kxmlcommanddlg.cpp:110 +msgid "List" +msgstr "सूची" -#: cups/kmconfigcupsdir.cpp:41 -msgid "Standard installation (/)" -msgstr "मानक संस्थापन (/)" +#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111 +msgid "Boolean" +msgstr "बूलिये" -#: cups/kmwusers.cpp:41 -msgid "Allowed Users" -msgstr "अनुमति प्राप्त उपयोक्ता" +#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56 +#: management/kxmlcommanddlg.cpp:114 +msgid "&Name:" +msgstr "नाम: (&N)" -#: cups/kmwusers.cpp:42 -msgid "Denied Users" -msgstr "नकारे गए उपयोक्ता" +#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 +#: management/kxmlcommanddlg.cpp:866 +msgid "&Description:" +msgstr "वर्णनः (&D)" -#: cups/kmwusers.cpp:44 -msgid "Define here a group of allowed/denied users for this printer." -msgstr "" -"इस प्रिंटर के लिए स्वीकार्य/नकारे गए उपयोक्ता समूह को यहाँ पारिभाषित करें." +#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 +msgid "&Format:" +msgstr "फॉर्मेट: (&F)" #: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117 msgid "&Type:" msgstr "क़िस्मः (&T)" -#: cups/cupsaddsmb2.cpp:55 cups/cupsaddsmb2.cpp:363 -msgid "&Export" -msgstr "निर्यात (&E)" +#: management/kxmlcommanddlg.cpp:118 +msgid "Default &value:" +msgstr "डिफ़ॉल्ट मान: (&v)" -#: cups/cupsaddsmb2.cpp:61 -msgid "Export Printer Driver to Windows Clients" -msgstr "प्रिंटर ड्राइवर विंडोज़ क्लाएंट में निर्यात करें" +#: management/kxmlcommanddlg.cpp:119 +msgid "Co&mmand:" +msgstr "कमांडः (&m)" -#: cups/cupsaddsmb2.cpp:72 -msgid "&Username:" -msgstr "उपयोक्ता नाम: (&U)" +#: management/kxmlcommanddlg.cpp:126 +msgid "&Persistent option" +msgstr "परसिस्टेंट विकल्प (&P)" -#: cups/cupsaddsmb2.cpp:73 -msgid "&Samba server:" -msgstr "साम्बा सर्वरः (&S)" +#: management/kxmlcommanddlg.cpp:128 +msgid "Va&lues" +msgstr "मान (&l)" -#: cups/cupsaddsmb2.cpp:74 management/kmwpassword.cpp:50 -msgid "&Password:" -msgstr "पासवर्ड: (&P)" +#: management/kxmlcommanddlg.cpp:136 +msgid "Minimum v&alue:" +msgstr "न्यूनतम मानः (&a)" -#: cups/cupsaddsmb2.cpp:79 -msgid "" -"Samba server
Adobe Windows PostScript driver files plus the CUPS " -"printer PPD will be exported to the [print$] " -"special share of the Samba server (to change the source CUPS server, use the " -"Samba username
User needs to have write access to the " -"[print$] share on the Samba server. [print$] " -"holds printer drivers prepared for download to Windows clients. This dialog " -"does not work for Samba servers configured with security = share " -"(but works fine with security = user)." -msgstr "" +#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:237 +#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141 +#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101 +msgid "Name" +msgstr "नाम " -#: cups/cupsaddsmb2.cpp:96 -msgid "" -"Samba password
The Samba setting encrypt passwords = yes " -"(default) requires prior use of smbpasswd -a [username] " -"command, to create an encrypted Samba password and have Samba recognize it." -msgstr "" +#: management/kmwend.cpp:53 management/kmwend.cpp:112 +#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 +msgid "Description" +msgstr "वर्णन" -#: cups/cupsaddsmb2.cpp:267 -#, c-format -msgid "Creating folder %1" -msgstr "फ़ोल्डर बनाया जा रहा है %1" +#: management/kxmlcommanddlg.cpp:150 +msgid "Add value" +msgstr "मान जोड़ें" -#: cups/cupsaddsmb2.cpp:275 -#, c-format -msgid "Uploading %1" -msgstr "अपलोडिंग %1" +#: management/kxmlcommanddlg.cpp:151 +msgid "Delete value" +msgstr "मान मिटाएँ" -#: cups/cupsaddsmb2.cpp:283 -#, c-format -msgid "Installing driver for %1" -msgstr "%1 के लिए ड्राइवर संस्थापित किया जा रहा है" +#: management/kxmlcommanddlg.cpp:153 +msgid "Apply changes" +msgstr "परिवर्तन लागू करें" -#: cups/cupsaddsmb2.cpp:291 -#, c-format -msgid "Installing printer %1" -msgstr "प्रिंटर %1 संस्थापित किया जा रहा है" +#: management/kxmlcommanddlg.cpp:154 +msgid "Add group" +msgstr "समूह जोड़ें" -#: cups/cupsaddsmb2.cpp:333 -msgid "Driver successfully exported." -msgstr "ड्राइवर सफलता पूर्वक निर्यात किया." +#: management/kxmlcommanddlg.cpp:155 +msgid "Add option" +msgstr "विकल्प जोड़ें" -#: cups/cupsaddsmb2.cpp:343 +#: management/kxmlcommanddlg.cpp:156 +msgid "Delete item" +msgstr "वस्तु मिटाएँ" + +#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135 +msgid "Move up" +msgstr "ऊपर जाएं" + +#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142 +msgid "Move down" +msgstr "नीचे जाएं" + +#: management/kxmlcommanddlg.cpp:162 +msgid "&Input From" +msgstr "से इनपुट (&I)" + +#: management/kxmlcommanddlg.cpp:163 +msgid "O&utput To" +msgstr "को आउटपुट (&u)" + +#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 +msgid "File:" +msgstr "फ़ाइलः" + +#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 +msgid "Pipe:" +msgstr "पाइपः" + +#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176 +msgid "Comment:" +msgstr "टिप्पणीः" + +#: management/kxmlcommanddlg.cpp:285 msgid "" -"Operation failed. Possible reasons are: permission denied or invalid Samba " -"configuration (see cupsaddsmb " -"manual page for detailed information, you need " -"CUPS version 1.1.11 or higher). You may want to try again with another " -"login/password." +"An identification string. Use only alphanumeric characters except spaces. The " +"string __root__ is reserved for internal use." msgstr "" +"एक पहचानकारक वाक्यांश. सिर्फ अल्फान्यूमेरिक अक्षरों, स्पेस को छोड़कर इस्तेमाल " +"करें. वाक्यांश __root__ आंतरिक उपयोग के लिए सुरक्षित है." -#: cups/cupsaddsmb2.cpp:352 -msgid "Operation aborted (process killed)." -msgstr "ऑपरेशन छोड़ा (प्रक्रिया ख़त्म)" +#: management/kxmlcommanddlg.cpp:289 +msgid "" +"A description string. This string is shown in the interface, and should be " +"explicit enough about the role of the corresponding option." +msgstr "" -#: cups/cupsaddsmb2.cpp:358 -msgid "%1
" -msgstr "%1
" +#: management/kxmlcommanddlg.cpp:293 +msgid "" +"The type of the option. This determines how the option is presented graphically " +"to the user." +msgstr "" +"विकल्प के क़िस्म. यह निर्धारित करता है कि उपयोक्ताओं को विकल्प चित्रमय रूप में " +"कैसे प्रस्तुत किये जाएँ." -#: cups/cupsaddsmb2.cpp:373 +#: management/kxmlcommanddlg.cpp:297 msgid "" -"You are about to prepare the %1 driver to be shared out to Windows " -"clients through Samba. This operation requires the " -"Adobe PostScript Driver, a recent version of Samba 2.2.x and a running SMB " -"service on the target server. Click Export to start the operation. Read " -"the cupsaddsmb manual page in Konqueror or type " -"man cupsaddsmb in a console window to learn more about this " -"functionality." +"The format of the option. This determines how the option is formatted for " +"inclusion in the global command line. The tag %value " +"can be used to represent the user selection. This tag will be replaced at " +"run-time by a string representation of the option value." msgstr "" -#: cups/cupsaddsmb2.cpp:393 +#: management/kxmlcommanddlg.cpp:303 msgid "" -"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " -"CUPS version 1.1.11 or higher)." +"The default value of the option. For non persistent options, nothing is added " +"to the command line if the option has that default value. If this value does " +"not correspond to the actual default value of the underlying utility, make the " +"option persistent to avoid unwanted effects." msgstr "" -#: cups/cupsaddsmb2.cpp:404 -#, c-format -msgid "Preparing to upload driver to host %1" -msgstr "होस्ट %1 पर ड्राइवर अपलोड करने की तैयारी में" +#: management/kxmlcommanddlg.cpp:309 +msgid "" +"Make the option persistent. A persistent option is always written to the " +"command line, whatever its value. This is useful when the chosen default value " +"does not match with the actual default value of the underlying utility." +msgstr "" -#: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149 -msgid "&Abort" -msgstr "छोड़ें (&A)" +#: management/kxmlcommanddlg.cpp:313 +#, c-format +msgid "" +"The full command line to execute the associated underlying utility. This " +"command line is based on a mechanism of tags that are replaced at run-time. The " +"supported tags are:" +"Set here the quota for this printer. Using limits of 0 "
-"means that no quota will be used. This is equivalent to set quota period to "
-"
Print Job Billing and Accounting
" -"Insert a meaningful string here to associate the current print job with a " -"certain account. This string will appear in the CUPS \"page_log\" to help with " -"the print accounting in your organization. (Leave it empty if you do not need " -"it.) " -"
It is useful for people who print on behalf of different \"customers\", " -"like print service bureaux, letter shops, press and prepress companies, or " -"secretaries who serve different bosses, etc.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-billing=... # example: \"Marketing_Department\" or " -"\"Joe_Doe\"
Scheduled Printing
" -"Scheduled printing lets you control the time of the actual printout, while " -"you can still send away your job now and have it out of your way. " -"
Especially useful is the \"Never (hold indefinitely)\" option. It allows " -"you to park your job until a time when you (or a printer administrator) decides " -"to manually release it. " -"
This is often required in enterprise environments, where you normally are " -"not allowed to directly and immediately access the huge production printers in " -"your Central Repro Department. However it is okay to send jobs to the " -"queue which is under the control of the operators (who, after all, need to make " -"sure that the 10,000 sheets of pink paper which is required by the Marketing " -"Department for a particular job are available and loaded into the paper " -"trays).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-hold-until=... # example: \"indefinite\" or \"no-hold\" " -"
Page Labels
" -"Page Labels are printed by CUPS at the top and bottom of each page. They " -"appear on the pages surrounded by a little frame box. " -"
They contain any string you type into the line edit field.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-label=\"...\" # example: \"Company Confidential\"" -"
Job Priority
" -"Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " -"First In, First Out. " -"
The job priority option allows you to re-order the queue according to your " -"needs. " -"
It works in both directions: you can increase as well as decrease " -"priorities. (Usually you can only control your own jobs). " -"
Since the default job priority is \"50\", any job sent with, for example, " -"\"49\" will be printed only after all those others have finished. Conversely, a " -"\"51\" or higher priority job will go right to the top of a populated queue (if " -"no other, higher prioritized one is present).
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o job-priority=... # example: \"10\" or \"66\" or \"99\"" -"
Welcome,
" +"This wizard will help to install a new printer on your computer. It will " +"guide you through the various steps of the process of installing and " +"configuring a printer for your printing system. At each step, you can always go " +"back using the Back button.
" +"We hope you enjoy this tool!
" +"सुस्वागतम्,
" +"यह विशेषज्ञ आपको आपके कम्प्यूटर पर नया प्रिंटर संस्थापित करने में मदद करेगा. " +"यह आपको आपके छपाई तंत्र में प्रिंटर संस्थापन तथा कॉन्फ़िगरेशन के विभिन्न चरणों " +"में मार्गदर्शन देगा. प्रत्येक चरण में आप हमेशा ही पीछे जा सकते हैं पीछे " +"बटन के उपयोग से.
" +"हमें उम्मीद है कि आप इस औज़ार का उपभोग करेंगे!
" +"केडीई प्रिंटर दल.
" -#: cups/kpschedulepage.cpp:126 -msgid "Advanced Options" -msgstr "विस्तृत विकल्प" +#: management/kmlistview.cpp:125 +msgid "Print System" +msgstr "प्रिंट तंत्र" -#: cups/kpschedulepage.cpp:137 -msgid "Immediately" -msgstr "तत्काल" +#: management/kmlistview.cpp:128 +msgid "Classes" +msgstr "वर्ग" -#: cups/kpschedulepage.cpp:138 -msgid "Never (hold indefinitely)" -msgstr "कभी नहीं (अनंत काल के लिए पकड़े रखें)" +#: management/kmlistview.cpp:131 +msgid "Printers" +msgstr "प्रिंटर" -#: cups/kpschedulepage.cpp:139 -msgid "Daytime (6 am - 6 pm)" -msgstr "दिन का समय (6 प्रातः - 6 संध्या)" +#: management/kmlistview.cpp:134 +msgid "Specials" +msgstr "विशेष" -#: cups/kpschedulepage.cpp:140 -msgid "Evening (6 pm - 6 am)" -msgstr "शाम के समय (6 संध्या - 6 प्रातः)" +#: management/kmwlocal.cpp:38 +msgid "Local Port Selection" +msgstr "स्थानीय पोर्ट चयन" -#: cups/kpschedulepage.cpp:141 -msgid "Night (6 pm - 6 am)" -msgstr "रात्रि के समय (6 संध्या - 6 प्रातः)" +#: management/kmwlocal.cpp:50 +msgid "Local System" +msgstr "स्थानीय तंत्र" -#: cups/kpschedulepage.cpp:142 -msgid "Weekend" -msgstr "सप्ताहांत" +#: management/kmwlocal.cpp:57 +msgid "Parallel" +msgstr "पैरेलल" -#: cups/kpschedulepage.cpp:143 -msgid "Second Shift (4 pm - 12 am)" -msgstr "द्वितीय पारी (4 संध्या - 12 प्रातः)" +#: management/kmwlocal.cpp:58 +msgid "Serial" +msgstr "सीरियल" -#: cups/kpschedulepage.cpp:144 -msgid "Third Shift (12 am - 8 am)" -msgstr "तृतीय पारी (12 प्रातः - 8 प्रातः)" +#: management/kmwlocal.cpp:59 +msgid "USB" +msgstr "यूएसबी" -#: cups/kpschedulepage.cpp:145 -msgid "Specified Time" -msgstr "उल्लेखित समय" +#: driver.cpp:389 management/kmwlocal.cpp:60 +msgid "Others" +msgstr "अन्य" -#: cups/kpschedulepage.cpp:160 -#, fuzzy -msgid "&Scheduled printing:" -msgstr "शेड्यूल छपाईः (&S)" +#: management/kmwlocal.cpp:63 +msgid "" +"Select a valid detected port, or enter directly the corresponding URI in the " +"bottom edit field.
" +msgstr "" +"एक वैध, ढूंढा गया पोर्ट चुनें या सीधे ही, नीचे संपादन क्षेत्र में सम्बन्धित " +"यूआरआई भरें.
" -#: cups/kpschedulepage.cpp:163 -msgid "&Billing information:" -msgstr "बिलिंग जानकारीः (&B)" +#: management/kmwlocal.cpp:78 +msgid "" +"_: The URI is empty\n" +"Empty URI." +msgstr "" -#: cups/kpschedulepage.cpp:166 -msgid "T&op/Bottom page label:" -msgstr "ऊपरी/निचला पृष्ठ शीर्षकः (&o)" +#: management/kmwlocal.cpp:83 +msgid "The local URI doesn't correspond to a detected port. Continue?" +msgstr "स्थानीय यूआरआई मिटाए गए पोर्ट से सम्बद्ध नहीं है. जारी रखें?" -#: cups/kpschedulepage.cpp:169 -msgid "&Job priority:" -msgstr "कार्य प्राथमिकताः (&J)" +#: management/kmwlocal.cpp:85 +msgid "Select a valid port." +msgstr "एक वैध पोर्ट चुनें." -#: cups/kpschedulepage.cpp:200 -msgid "The time specified is not valid." -msgstr "उल्लेखित समय वैध नहीं है." +#: management/kmwlocal.cpp:166 +msgid "Unable to detect local ports." +msgstr "स्थानीय पोर्ट पता लगाने में अक्षम." -#: cups/kmpropquota.cpp:57 -msgid "Quotas" -msgstr "नियतांश" +#: management/kmconfigcommand.cpp:33 +msgid "Commands" +msgstr "कमांड्स" -#: cups/kmpropquota.cpp:58 -msgid "Quota Settings" -msgstr "नियतांश विन्यास" +#: management/kmconfigcommand.cpp:34 +msgid "Command Settings" +msgstr "कमांड विन्यास" -#: cups/ippreportdlg.cpp:34 -msgid "IPP Report" -msgstr "आईपीपी रिपोर्ट" +#: management/kmconfigcommand.cpp:37 +msgid "Edit/Create Commands" +msgstr "संपादन/बनाएँ कमांड्स" -#: cups/ippreportdlg.cpp:93 -msgid "Internal error: unable to generate HTML report." -msgstr "आंतरिक त्रुटि: एचटीएमएल रिपोर्ट बनाने में असफल" +#: management/kmconfigcommand.cpp:39 +msgid "" +"Command objects perform a conversion from input to output."
+"
They are used as the basis to build both print filters and special "
+"printers. They are described by a command string, a set of options, a set of "
+"requirements and associated mime types. Here you can create new command objects "
+"and edit existing ones. All changes will only be effective for you."
+msgstr ""
-#: cups/kmcupsmanager.cpp:819
-msgid "Library cupsdconf not found. Check your installation."
-msgstr "library cupsdconf पाया नहीं जा सका. कृपया अपना संस्थापन जाँचें"
+#: management/kmwclass.cpp:37
+msgid "Class Composition"
+msgstr "वेक्टर कम्पोज़िशन"
-#: cups/kmcupsmanager.cpp:825
-msgid "Symbol %1 not found in cupsdconf library."
-msgstr "प्रतीक %1 cupsdconf लाइब्रेरी में नहीं मिला."
+#: management/kmwclass.cpp:52
+msgid "Available printers:"
+msgstr "उपलब्ध प्रिंटरः"
-#: cups/kmcupsmanager.cpp:920
-msgid "&Export Driver..."
-msgstr "ड्राइवर निर्यात करें... (&E)"
+#: management/kmwclass.cpp:53
+msgid "Class printers:"
+msgstr "प्रिंटर वर्गः"
-#: cups/kmcupsmanager.cpp:922
-msgid "&Printer IPP Report"
-msgstr "प्रिंटर आईपीपी रिपोर्ट (&P)"
+#: management/kmwclass.cpp:79
+msgid "You must select at least one printer."
+msgstr "आपको कम से कम एक प्रिंटर चुनना होगा."
-#: cups/kmcupsmanager.cpp:968 cups/kmwippprinter.cpp:218
-#, c-format
-msgid "IPP Report for %1"
-msgstr "%1 के लिए आईपीपी रिपोर्ट"
+#: management/kmconfigfilter.cpp:40
+msgid "Filter"
+msgstr "फ़िल्टर"
-#: cups/kmcupsmanager.cpp:972
-msgid "Unable to retrieve printer information. Error received:"
-msgstr "प्रिंटर जानकारी पाने में अक्षम. त्रुटि प्राप्तः"
+#: management/kmconfigfilter.cpp:41
+msgid "Printer Filtering Settings"
+msgstr "प्रिंटर फ़िल्टरिंग विन्यास"
-#: cups/kmcupsmanager.cpp:985
-msgid "Server"
-msgstr "सर्वर"
+#: management/kmconfigfilter.cpp:44
+msgid "Printer Filter"
+msgstr "प्रिंटर फ़िल्टर"
-#: cups/kmcupsmanager.cpp:1025
-#, c-format
+#: management/kmconfigfilter.cpp:56
msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running. Error: %1."
+"The printer filtering allows you to view only a specific set of printers "
+"instead of all of them. This may be useful when there are a lot of printers "
+"available but you only use a few ones. Select the printers you want to see from "
+"the list on the left or enter a Location filter (ex: Group_1*). Both are "
+"cumulative and ignored if empty."
msgstr ""
-"कप्स सर्वर से कनेक्शन असफल. जाँच करें कि कप्स सर्वर उचित प्रकार संस्थापित है "
-"तथा चल रहा है. त्रुटि: %1."
-
-#: cups/kmcupsmanager.cpp:1026
-msgid "the IPP request failed for an unknown reason"
-msgstr "अज्ञात कारणों से आईपीपी निवेदन असफल"
-
-#: cups/kmcupsmanager.cpp:1060
-msgid "connection refused"
-msgstr "कनेक्शन अस्वीकृत"
-
-#: cups/kmcupsmanager.cpp:1063
-msgid "host not found"
-msgstr "होस्ट नहीं मिला"
-#: cups/kmcupsmanager.cpp:1067
-msgid "read failed (%1)"
-msgstr ""
+#: management/kmconfigfilter.cpp:62
+msgid "Location filter:"
+msgstr "स्थान फ़िल्टरः"
-#: cups/kmcupsmanager.cpp:1071
-#, fuzzy
+#: management/kmmainview.cpp:72
msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running. Error: %2: %1."
+"The printer %1 already exists. Continuing will overwrite existing printer. Do "
+"you want to continue?"
msgstr ""
-"कप्स सर्वर से कनेक्शन असफल. जाँच करें कि कप्स सर्वर उचित प्रकार संस्थापित है "
-"तथा चल रहा है. त्रुटि: %1."
+"प्रिंटर %1 पहले से ही अस्तित्व में है. जारी रखने पर मौज़ूदा प्रिंटर मिटाकर लिख "
+"दिया जाएगा. क्या आप जारी रखना चाहेंगे?"
-#: cups/ipprequest.cpp:164
-msgid "You don't have access to the requested resource."
-msgstr "आपके पास निवेदित रिसोर्स के लिए पहूँच अनुमति नहीं है."
+#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
+#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
+msgid "Initializing manager..."
+msgstr "प्रबंधक प्रारंभ किया जा रहा है..."
-#: cups/ipprequest.cpp:167
-msgid "You are not authorized to access the requested resource."
-msgstr "आपके पास निवेदित रिसोर्स पर पहूँच के लिए अधिकार नहीं है."
+#: management/kmmainview.cpp:180
+msgid "&Icons,&List,&Tree"
+msgstr "प्रतीक (&I),सूची (L&),ट्री (T&)"
-#: cups/ipprequest.cpp:170
-msgid "The requested operation cannot be completed."
-msgstr "निवेदित आपरेशन पूरा नहीं हो सकता."
+#: management/kmmainview.cpp:184
+msgid "Start/Stop Printer"
+msgstr "प्रिंटर प्रारंभ/बंद"
-#: cups/ipprequest.cpp:173
-msgid "The requested service is currently unavailable."
-msgstr "निवेदित सेवा वर्तमान में अनुपलब्ध है."
+#: management/kmmainview.cpp:186
+msgid "&Start Printer"
+msgstr "प्रिंटर प्रारंभ (&S)"
-#: cups/ipprequest.cpp:176
-msgid "The target printer is not accepting print jobs."
-msgstr "लक्षित प्रिंटर छपाई कार्य स्वीकार नहीं कर रहा है."
+#: management/kmmainview.cpp:187
+msgid "Sto&p Printer"
+msgstr "प्रिंटर बन्द (&p)"
-#: cups/ipprequest.cpp:313
-msgid ""
-"Connection to CUPS server failed. Check that the CUPS server is correctly "
-"installed and running."
-msgstr ""
-"कप्स सर्वर से कनेक्शन असफल. जाँच करें कि कप्स सर्वर उचित प्रकार संस्थापित हे "
-"तथा चल रहा है."
+#: management/kmmainview.cpp:189
+msgid "Enable/Disable Job Spooling"
+msgstr "कार्य स्पूलिंग सक्षम/अक्षम करें "
-#: cups/ipprequest.cpp:316
-msgid "The IPP request failed for an unknown reason."
-msgstr "अज्ञात कारणों से आईपीपी निवेदन असफल"
+#: management/kmmainview.cpp:191
+msgid "&Enable Job Spooling"
+msgstr "कार्य स्पूलिंग सक्षम करें (&E)"
-#: cups/ipprequest.cpp:461
-msgid "Attribute"
-msgstr "विशेषता"
+#: management/kmmainview.cpp:192
+msgid "&Disable Job Spooling"
+msgstr "कार्य स्पूलिंग अक्षम करें (&D)"
-#: cups/ipprequest.cpp:462
-msgid "Values"
-msgstr "मान"
+#: management/kmmainview.cpp:195
+msgid "&Configure..."
+msgstr "कॉन्फ़िगर...(&C)"
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "True"
-msgstr "सही"
+#: management/kmmainview.cpp:196
+msgid "Add &Printer/Class..."
+msgstr "जोड़ें प्रिंटर/श्रेणी... (&P)"
-#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
-msgid "False"
-msgstr "गलत"
+#: management/kmmainview.cpp:197
+msgid "Add &Special (pseudo) Printer..."
+msgstr "जोड़ें विशेष (कृत्रिम) प्रिंटर... (&S)"
-#: cups/kmwippprinter.cpp:45
-msgid "IPP Printer Information"
-msgstr "आईपीपी प्रिंटर जानकारी"
+#: management/kmmainview.cpp:198
+msgid "Set as &Local Default"
+msgstr "स्थानीय डिफ़ॉल्ट के रूप में नियत करें (&L)"
-#: cups/kmwippprinter.cpp:55
-msgid "&Printer URI:"
-msgstr "प्रिंटर यूआरआई: (&P)"
+#: management/kmmainview.cpp:199
+msgid "Set as &User Default"
+msgstr "उपयोक्ता डिफ़ॉल्ट के रूप में नियत करें (&U)"
-#: cups/kmwippprinter.cpp:64
-msgid ""
-"
Either enter the printer URI directly, or use the network scanning " -"facility.
" -msgstr "" -"या तो प्रिंटर यूआरआई सीधे ही भरें, या नेटवर्क स्कैनिंग सुविधा इस्तेमाल " -"करें.
" +#: management/kmmainview.cpp:200 +msgid "&Test Printer..." +msgstr "प्रिंटर जाँचें... (&T)" -#: cups/kmwippprinter.cpp:65 -msgid "&IPP Report" -msgstr "आईपीपी रिपोर्ट (&I)" +#: management/kmmainview.cpp:201 +msgid "Configure &Manager..." +msgstr "प्रबंधक कॉन्फ़िगर करें... (&M)" -#: cups/kmwippprinter.cpp:112 -msgid "You must enter a printer URI." -msgstr "आपको एक प्रिंटर यूआरआई प्रविष्ट करना होगा." +#: management/kmmainview.cpp:202 +msgid "Initialize Manager/&View" +msgstr "प्रारंभ करें प्रबंधक/दृश्य (&V)" -#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117 -msgid "No printer found at this address/port." -msgstr "इस पता/पोर्ट पर कोई प्रिंटर नहीं मिला." +#: management/kmmainview.cpp:204 +msgid "&Orientation" +msgstr "दिशा-स्थिति (&O)" -#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136 -msgid "" -"_: Unknown host - 1 is the IP\n" -"Enter the URI corresponding to the printer to be installed. Examples:
" -"%1
" +msgstr "प्रबंधक:%1
से त्रुटि संदेश प्राप्त" -#: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298 -msgid "Banners" -msgstr "ध्वज" +#: management/kmmainview.cpp:649 +msgid "Internal error (no error message)." +msgstr "आंतरिक त्रुटि (कोई त्रुटि संदेश नहीं)." -#: cups/kmpropbanners.cpp:50 -msgid "Banner Settings" -msgstr "ध्वज विन्यास" +#: management/kmmainview.cpp:667 +msgid "Unable to restart print server." +msgstr "प्रिंट सर्वर फिर से प्रारंभ करने में असफल." -#: cups/kpimagepage.cpp:44 +#: management/kmmainview.cpp:672 +msgid "Restarting server..." +msgstr "सर्वर फिर से चालू किया जा रहा है..." + +#: management/kmmainview.cpp:682 +msgid "Unable to configure print server." +msgstr "प्रिंटर सर्वर कॉन्फ़िगर करने में अक्षम." + +#: management/kmmainview.cpp:687 +msgid "Configuring server..." +msgstr "सर्वर कॉन्फ़िगर करने में..." + +#: management/kmmainview.cpp:842 msgid "" -"Brightness: Slider to control the brightness value of all colors " -"used.
" -"The brightness value can range from 0 to 200. Values greater than 100 will " -"lighten the print. Values less than 100 will darken the print.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o brightness=... # use range from \"0\" to \"200\"" -"
Hue (Tint): Slider to control the hue value for color rotation.
" -"The hue value is a number from -360 to 360 and represents the color hue " -"rotation. The following table summarizes the change you will see for the base " -"colors: " -"
Original | " -"hue=-45 | " -"hue=45 |
---|---|---|
Red | " -"Purple | " -"Yellow-orange |
Green | " -"Yellow-green | " -"Blue-green |
Yellow | " -"Orange | " -"Green-yellow |
Blue | " -"Sky-blue | " -"Purple |
Magenta | " -"Indigo | " -"Crimson |
Cyan | " -"Blue-green | " -"Light-navy-blue |
Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o hue=... # use range from \"-360\" to \"360\"
Saturation: Slider to control the saturation value for all colors " -"used.
" -"The saturation value adjusts the saturation of the colors in an image, " -"similar to the color knob on your television. The color saturation value.can " -"range from 0 to 200. On inkjet printers, a higher saturation value uses more " -"ink. On laserjet printers, a higher saturation uses more toner. A color " -"saturation of 0 produces a black-and-white print, while a value of 200 will " -"make the colors extremely intense.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o saturation=... # use range from \"0\" to \"200\"" -"
Gamma: Slider to control the gamma value for color correction.
" -"The gamma value can range from 1 to 3000. A gamma values greater than 1000 " -"lightens the print. A gamma value less than 1000 darken the print. The default " -"gamma is 1000.
" -"Note:
the gamma value adjustment is not visible in the thumbnail " -"preview. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o gamma=... # use range from \"1\" to \"3000\"" -"
Image Printing Options
" -"All options controlled on this page only apply to printing images. Most " -"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " -"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " -"output of image printouts are: " -"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " -"settings, please look at the 'WhatsThis' items provided for these controls. " -"
Coloration Preview Thumbnail
" -"The coloration preview thumbnail indicates change of image coloration by " -"different settings. Options to influence output are: " -"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " -"settings, please look at the 'WhatsThis' items provided for these controls. " -"
Image Size: Dropdown menu to control the image size on the printed " -"paper. Dropdown works in conjunction with slider below. Dropdown options " -"are:.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o natural-scaling=... # range in % is 1....800 " -"" -"
-o scaling=... # range in % is 1....800 " -"
-o ppi=... # range in ppi is 1...1200
Position Preview Thumbnail
" -"This position preview thumbnail indicates the position of the image on the " -"paper sheet. " -"
Click on horizontal and vertical radio buttons to move image alignment on " -"paper around. Options are: " -"
Reset to Default Values
" -"Reset all coloration settings to default values. Default values are: " -"
Image Positioning:
" -"Select a pair of radiobuttons to move image to the position you want on the " -"paper printout. Default is 'center'.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o position=... # examples: \"top-left\" or \"bottom\"" -"
Enter the information concerning the remote IPP server owning the targeted " -"printer. This wizard will poll the server before continuing.
" -msgstr "" -"रिमोट आईपीपी सर्वर के बारे में जानकारी भरें जो लक्षित प्रिंटर का स्वामी है. " -"यह विशेषज्ञ जारी रखने से पूर्व सर्वर को पोल करेगा.
" +#: management/kmwsocket.cpp:38 +msgid "Network Printer Information" +msgstr "नेटवर्क प्रिंटर जानकारी" -#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 -#: rlpr/kmwrlpr.cpp:62 -msgid "Host:" -msgstr "होस्टः" +#: management/kmwsocket.cpp:48 +msgid "&Printer address:" +msgstr "प्रिंटर पताः (&P)" -#: cups/kmwipp.cpp:43 -msgid "Port:" -msgstr "पोर्टः" +#: management/kmwsocket.cpp:49 +msgid "P&ort:" +msgstr "पोर्टः (&o)" -#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79 -msgid "Empty server name." -msgstr "सर्वर नाम खाली है." +#: management/kmwsocket.cpp:99 +msgid "You must enter a printer address." +msgstr "आपको एक प्रिंटर पता प्रविष्ट करना होगा." -#: cups/kmwipp.cpp:59 -msgid "Incorrect port number." +#: management/kmwsocket.cpp:110 +msgid "Wrong port number." msgstr "गलत पोर्ट क्रमांक." -#: cups/kmwipp.cpp:72 -msgid "Additional Tags
You may send additional commands to the CUPS " -"server via this editable list. There are 3 purposes for this: " -"Standard CUPS job options: A complete list of standard CUPS job " -"options is in the CUPS User Manual" -". Mappings of the kprinter user interface widgets to respective CUPS job " -"option names are named in the various WhatsThis help items..
" -"Custom CUPS job options: CUPS print servers may be customized with " -"additional print filters and backends which understand custom job options. You " -"can specify such custom job options here. If in doubt, ask your system " -"administrator..
" -"" -"
Operator Messages: You may send additional messages to the " -"operator(s) of your production printers (e.g. in your " -"Central Repro Department
) Messages can be read by the operator(s) (or " -"yourself) by viewing the \"Job IPP Report\" for the job. " -"Examples:" -"A standard CUPS job option:" -"" -"
(Name) number-up -- (Value) 9 " -"
" -"
A job option for custom CUPS filters or backends:" -"
(Name) DANKA_watermark -- " -"(Value) Company_Confidential " -"
" -"
A message to the operator(s):" -"
(Name) Deliver_after_completion -- " -"(Value) to_Marketing_Departm." -"
Note: the fields must not include spaces, tabs or quotes. You may " -"need to double-click on a field to edit it. " -"
Warning: Do not use such standard CUPS option names which also can be " -"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " -" or if they are sent multiple times. For all options supported by the GUI, " -"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " -"option name.)
Select the default banners associated with this printer. These banners will " -"be inserted before and/or after each print job sent to the printer. If you " -"don't want to use banners, select No Banner.
" +"When using font embedding you can select additional directories where TDE " +"should search for embeddable font files. By default, the X server font path is " +"used, so adding those directories is not needed. The default search path should " +"be sufficient in most cases." msgstr "" -#: cups/kmwfax.cpp:39 -msgid "Fax Serial Device" -msgstr "फैक्स सीरियल उपकरण" +#: management/networkscanner.cpp:104 management/networkscanner.cpp:184 +msgid "Sc&an" +msgstr "स्कैन (&a)" -#: cups/kmwfax.cpp:43 -msgid "Select the device which your serial Fax/Modem is connected to.
" -msgstr "आपके सीरियल फैक्स/मॉडेम से जुड़े उपकरण चुनें.
" +#: management/networkscanner.cpp:111 +msgid "Network scan:" +msgstr "नेटवर्क स्कैनः" -#: cups/kmwfax.cpp:81 -msgid "You must select a device." -msgstr "आपको एक उपकरण चुनना होगा." +#: management/networkscanner.cpp:112 management/networkscanner.cpp:299 +#: management/networkscanner.cpp:310 +#, c-format +msgid "Subnet: %1" +msgstr "सबनेट: %1" -#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72 +#: cups/cupsaddsmb2.cpp:409 management/networkscanner.cpp:149 +msgid "&Abort" +msgstr "छोड़ें (&A)" + +#: management/networkscanner.cpp:161 msgid "" -"No valid print executable was found in your path. Check your installation." +"You are about to scan a subnet (%1.*) that does not correspond to the current " +"subnet of this computer (%2.*). Do you want to scan the specified subnet " +"anyway?" msgstr "" -"कोई वैध छपाई एक्जीक्यूटेबल आपके पथ में नहीं मिला. अपना संस्थापन जाँचें." -#: foomatic/kmfoomaticmanager.cpp:70 -msgid "This is not a Foomatic printer" -msgstr "यह फूमेटिक प्रिंटर नहीं है" +#: management/networkscanner.cpp:164 +msgid "&Scan" +msgstr "स्कैन (&S)" -#: foomatic/kmfoomaticmanager.cpp:75 -msgid "Some printer information are missing" -msgstr "कुछ प्रिंटर जानकारी गुम है" +#: management/kminstancepage.cpp:61 +msgid "" +"Define/Edit here instances for the current selected printer. An instance is a " +"combination of a real (physical) printer and a set of predefined options. For a " +"single InkJet printer, you could define different print formats like " +"DraftQuality, PhotoQuality or TwoSided" +". Those instances appear as normal printers in the print dialog and allow you " +"to quickly select the print format you want." +msgstr "" -#: kmmanager.cpp:70 -msgid "This operation is not implemented." -msgstr "यह ऑपरेशन कार्यान्वयित नहीं है" +#: management/kminstancepage.cpp:87 +msgid "New..." +msgstr "नया..." -#: kmmanager.cpp:169 -msgid "Unable to locate test page." -msgstr "जाँच पृष्ठ निर्धारित करने में अक्षम." +#: management/kminstancepage.cpp:88 +msgid "Copy..." +msgstr "नक़ल..." -#: kmmanager.cpp:449 -msgid "Can't overwrite regular printer with special printer settings." -msgstr "सामान्य प्रिंटर को विशिष्ट प्रिंटर विन्यास से मिटाकर लिख नहीं सका." +#: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91 +msgid "Set as Default" +msgstr "डिफ़ॉल्ट रूप में नियत करें" -#: kmmanager.cpp:478 -#, c-format -msgid "Parallel Port #%1" -msgstr "पैरेलल पोर्ट #%1" +#: management/kminstancepage.cpp:92 +#, fuzzy +msgid "Settings" +msgstr "विन्यास..." -#: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661 -#, c-format -msgid "Unable to load TDE print management library: %1" -msgstr "केडीई छपाई प्रबंधन लाइब्रेरी लोड करने में अक्षम: %1" +#: management/kminstancepage.cpp:94 +msgid "Test..." +msgstr "जांच..." -#: kmmanager.cpp:491 kxmlcommand.cpp:669 -msgid "Unable to find wizard object in management library." -msgstr "प्रबंधन लाइब्रेरी में विशेषज्ञ ऑब्जेक्ट पाने में अक्षम." +#: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126 +#: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145 +#: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164 +#: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190 +#: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210 +#: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260 +msgid "(Default)" +msgstr "(डिफ़ॉल्ट)" -#: kmmanager.cpp:507 -msgid "Unable to find options dialog in management library." -msgstr "प्रबंधन लाइब्रेरी में विकल्प संवाद पाने में अक्षम." +#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 +msgid "Instance Name" +msgstr "इंस्टैंस नाम" -#: kmmanager.cpp:534 -msgid "No plugin information available" -msgstr "कोई प्लगइन जानकारी उपलब्ध नहीं." +#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182 +msgid "Enter name for new instance (leave untouched for default):" +msgstr "नए इंसटैंस के लिए नाम भरें (डिफ़ॉल्ट के लिए जैसा है वैसा ही रहने दें):" -#: kprintpreview.cpp:140 -msgid "Do you want to continue printing anyway?" -msgstr "जैसे भी हो, क्या आप जारी रखना चाहते हैं?" +#: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187 +msgid "Instance name must not contain any spaces or slashes." +msgstr "इंसटैंस नाम में कोई खाली जगह या स्लैशेस नहीं होनी चाहिएँ." -#: kprintpreview.cpp:148 kprintpreview.cpp:227 -msgid "Print Preview" -msgstr "छपाई नमूना" +#: management/kminstancepage.cpp:161 +msgid "Do you really want to remove instance %1?" +msgstr "क्या आप सचमुच में इंसटैंस %1 को मिटाना चाहते है?" -#: kprintpreview.cpp:278 +#: management/kminstancepage.cpp:161 msgid "" -"The preview program %1 cannot be found. Check that the program is correctly " -"installed and located in a directory included in your PATH environment " -"variable." +"You can't remove the default instance. However all settings of %1 will be " +"discarded. Continue?" msgstr "" -"पूर्वावलोकन प्रोग्राम %1 पाया नहीं जा सका. जाँचें कि प्रोग्राम उचित प्रकार " -"संस्थापित है तथा आपके एनवायरनमेंट वेरिएबल पथ में शामिल डिरेक्ट्री में स्थित है." +"आप डिफ़ॉल्ट इंस्टेंसेस को मिटा नहीं सकते. तथापि %1 के सभी विन्यास मिटा दिए " +"जाएंगे. जारी रखें?" -#: kprintpreview.cpp:303 -msgid "" -"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " -"other external PostScript viewer could be found." -msgstr "" -"पूर्वावलोकन असफलः न तो आंतरिक केडीई पोस्ट-स्क्रिप्ट प्रदर्शक (के-घोस्ट-व्यू) न " -"ही अन्य बाहरी पोस्ट-स्क्रिप्ट प्रदर्शक पाया जा सका." +#: management/kminstancepage.cpp:213 +#, c-format +msgid "Unable to find instance %1." +msgstr "इंस्टैंस %1 ढूंढने में अक्षम." -#: kprintpreview.cpp:307 +#: management/kminstancepage.cpp:215 #, c-format msgid "" -"Preview failed: TDE could not find any application to preview files of type %1." -msgstr "" -"पूर्वावलोकन असफलः केडीई द्वारा फ़ाइल क़िस्म %1 के पूर्वावलोकन के लिए कोई " -"अनुप्रयोग नहीं पा सका." +"Unable to retrieve printer information. Message from printing system: %1." +msgstr "प्रिंटर जानकारी पाने में अक्षम. प्रिंट तंत्र से संदेश: %1." -#: kprintpreview.cpp:317 +#: management/kminstancepage.cpp:232 +msgid "The instance name is empty. Please select an instance." +msgstr "इंसटेंस नाम खाली है. कृपया एक इंसटैंस चुनें." + +#: management/kminstancepage.cpp:264 +msgid "Internal error: printer not found." +msgstr "आंतरिक त्रुटि.प्रिंटर नहीं मिला." + +#: management/kminstancepage.cpp:268 #, c-format -msgid "Preview failed: unable to start program %1." -msgstr "पूर्वावलोकन असफलः प्रोग्राम %1 प्रारंभ करने में अक्षम." +msgid "Unable to send test page to %1." +msgstr "जाँच पृष्ठ %1 को भेजने में अक्षम." -#: kprintpreview.cpp:322 -msgid "Do you want to continue printing?" -msgstr "क्या आप छापना जारी रखना चाहते हैं?" +#: management/kmpropcontainer.cpp:35 +msgid "Change..." +msgstr "बदलें..." -#: marginwidget.cpp:37 -msgid "" -"Top Margin
. " -"This spinbox/text edit field lets you control the top margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror..
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-top=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Bottom Margin
. " -"This spinbox/text edit field lets you control the bottom margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-bottom=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Left Margin
. " -"This spinbox/text edit field lets you control the left margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-left=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Right Margin
. " -"This spinbox/text edit field lets you control the right margin of your " -"printout if the printing application does not define its margins internally. " -"
" -"The setting works for instance for ASCII text file printing, or for printing " -"from KMail and and Konqueror.
" -"Note:
This margin setting is not intended for KOffice or " -"OpenOffice.org printing, because these applications (or rather their users) " -"are expected to do it by themselves. It also does not work for PostScript or " -"PDF file, which in most cases have their margins hardcoded internally. " -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o page-right=... # use values from \"0\" or higher. \"72\" is " -"equal to 1 inch.
Change Measurement Unit
. " -"You can change the units of measurement for the page margins here. Select " -"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).
Custom Margins Checkbox
. " -"Enable this checkbox if you want to modify the margins of your printouts " -"
You can change margin settings in 4 ways: " -"
\"Drag-your-Margins\"
. " -"Use your mouse to drag and set each margin on this little preview window. " -"
Enter the information concerning your printer or class. Name " +"is mandatory, Location and Description " +"are not (they may even not be used on some systems).
" +msgstr "" -#: marginwidget.cpp:169 -msgid "Millimeters (mm)" -msgstr "मिलीमीटर (मिमी)" +#: management/kmwname.cpp:39 +msgid "Name:" +msgstr "नाम:" -#: kprinterimpl.cpp:156 -msgid "Cannot copy multiple files into one file." -msgstr "बहुत सी फ़ाइलों को एक फ़ाइल में नक़ल नहीं कर सकता." +#: kprintdialog.cpp:284 management/kmwname.cpp:40 +msgid "Location:" +msgstr "स्थानः" -#: kprinterimpl.cpp:165 -msgid "Cannot save print file to %1. Check that you have write access to it." -msgstr "" -"प्रिंट फ़ाइल %1 पर सहेजा नहीं जा सकता. जाँचें कि आपके पास उक्त फ़ाइल के लिए " -"लिखने की अनुमति है." +#: management/kmwname.cpp:48 +msgid "You must supply at least a name." +msgstr "आपको कम से कम एक नाम देना होगा." -#: kprinterimpl.cpp:233 -#, c-format -msgid "Printing document: %1" -msgstr "दस्तावेज मुद्रित किया जा रहा है: %1" +#: management/kmwname.cpp:56 +msgid "" +"It is usually not a good idea to include spaces in printer name: it may prevent " +"your printer from working correctly. The wizard can strip all spaces from the " +"string you entered, resulting in %1; what do you want to do?" +msgstr "" -#: kprinterimpl.cpp:251 -#, c-format -msgid "Sending print data to printer: %1" -msgstr "प्रिंटर में छपाई डाटा प्रेषित किया जा रहा है: %1" +#: management/kmwname.cpp:62 +msgid "Strip" +msgstr "स्ट्रिप" -#: kprinterimpl.cpp:279 -msgid "Unable to start child print process. " -msgstr "शिशु छपाई प्रक्रिया प्रारंभ करने में अक्षम." +#: kprinterimpl.cpp:510 management/kmwname.cpp:62 +msgid "Keep" +msgstr "रखें" -#: kprinterimpl.cpp:281 +#: management/kmdriverdialog.cpp:48 msgid "" -"The TDE print server (tdeprintd) could not be contacted. Check that this " -"server is running." +"Some options are in conflict. You must resolve those conflicts before " +"continuing." msgstr "" -"केडीई छपाई सर्वर (केडीईप्रिंटडी) से सम्पर्क नहीं हो पाया. जाँच करें कि " -"यह सर्वर चल रहा है." +"कुछ विकल्प परस्पर विरोधी हैं. आपको इन विरोधों का निराकरण जारी रखने से पूर्व " +"करना होगा." -#: kprinterimpl.cpp:283 +#: management/kmpropwidget.cpp:50 msgid "" -"_: 1 is the command that%1
%1
Unable to perform the requested page selection. The filter psselect " -"cannot be inserted in the current filter chain. See Filter " -"tab in the printer properties dialog for further information.
" -msgstr "" +#: management/kmconfigpreview.cpp:36 +msgid "Preview Settings" +msgstr "पूर्वावलोकन विन्यास" -#: kprinterimpl.cpp:355 -msgid "Could not load filter description for %1.
" -msgstr "%1 के लिए फ़िल्टर वर्णन लोड नहीं कर सका.
" +#: management/kmconfigpreview.cpp:39 +msgid "Preview Program" +msgstr "पूर्वावलोकन प्रोग्राम" -#: kprinterimpl.cpp:371 -msgid "" -"Error while reading filter description for %1" -". Empty command line received.
" -msgstr "" -"%1 के लिए फ़िल्टर वर्णन पढ़ने में त्रुटि. खाली कमांड पंक्ति प्राप्त " -"हुई.
" +#: management/kmconfigpreview.cpp:41 +msgid "&Use external preview program" +msgstr "बाहरी पूर्वावलोकन प्रोग्राम इस्तेमाल करें (&U)" -#: kprinterimpl.cpp:385 +#: management/kmconfigpreview.cpp:44 msgid "" -"The MIME type %1 is not supported as input of the filter chain (this may happen " -"with non-CUPS spoolers when performing page selection on a non-PostScript " -"file). Do you want TDE to convert the file to a supported format?" +"You can use an external preview program (PS viewer) instead of the TDE built-in " +"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be " +"found, TDE tries automatically to find another external PostScript viewer" msgstr "" -#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 -msgid "Convert" -msgstr "बदलें" +#: management/kmpropdriver.cpp:36 +msgid "Manufacturer:" +msgstr "उत्पादक:" -#: kprinterimpl.cpp:399 -msgid "Select MIME Type" -msgstr "माइम क़िस्म चुनें" +#: management/kmpropdriver.cpp:37 +msgid "Printer model:" +msgstr "प्रिंटर मॉडलः" -#: kprinterimpl.cpp:400 -msgid "Select the target format for the conversion:" -msgstr "कन्वर्सन के लिए टार्गेट फॉर्मेट चुनें:" +#: management/kmpropdriver.cpp:38 +msgid "Driver info:" +msgstr "ड्राइवर जानकारीः" -#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 -msgid "Operation aborted." -msgstr "ऑपरेशन छोड़ा." +#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53 +#: management/kmwend.cpp:104 +msgid "Driver" +msgstr "ड्राइवर" -#: kprinterimpl.cpp:410 -msgid "No appropriate filter found. Select another target format." -msgstr "कोई उपयुक्त फ़िल्टर नहीं मिला. अन्य टार्गेट फॉर्मेट चुनें." +#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54 +msgid "Driver Settings" +msgstr "ड्राइवर विन्यास" -#: kprinterimpl.cpp:423 -msgid "" -"%1
The command will use an output file. If checked, make sure the command " +"contains an output tag.
" +msgstr "" +"कमांड आउटपुट फ़ाइल उपयोग करेगा. यदि चुना जाता है, सुनिश्चित हों कि कमांड मे " +"आउटपुट टैग समाविष्ट हो.
" -#: tools/escputil/escpwidget.cpp:164 +#: management/kmspecialprinterdlg.cpp:108 #, c-format -msgid "Unsupported connection type: %1" -msgstr "असमर्थित कनेक्शन क़िस्मः %1" - -#: tools/escputil/escpwidget.cpp:171 msgid "" -"An escputil process is still running. You must wait until its completion before " -"continuing." +"The command to execute when printing on this special printer. Either enter " +"the command to execute directly, or associate/create a command object with/for " +"this special printer. The command object is the preferred method as it provides " +"support for advanced settings like mime type checking, configurable options and " +"requirement list (the plain command is only provided for backward " +"compatibility). When using a plain command, the following tags are " +"recognized:
" +"The default mimetype for the output file (e.g. application/postscript).
" msgstr "" +"आउटपुट फ़ाइल के लिए डिफ़ॉल्ट माइमक़िस्म (e.g. अनुप्रयोग/पोस्टस्क्रिप्ट).
" -#: tools/escputil/escpwidget.cpp:204 -msgid "Internal error: unable to start escputil process." -msgstr "आंतरिक त्रुटि: escputil प्रक्रिया प्रारंभ करने में असफल" - -#: tools/escputil/escpwidget.cpp:214 -msgid "Operation terminated with errors." -msgstr "प्रक्रिया त्रुटियों के साथ पूर्ण." - -#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 -msgid "Output" -msgstr "आउटपुट" +#: management/kmspecialprinterdlg.cpp:121 +msgid "The default extension for the output file (e.g. ps, pdf, ps.gz).
" +msgstr "आउटपुट फ़ाइल के डिफ़ॉल्ट एक्सटेंशन (जैसे- ps, pdf, ps.gz).
" -#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127 -msgid "&Export..." -msgstr "निर्यात... (&E)" +#: management/kmspecialprinterdlg.cpp:170 +msgid "You must provide a non-empty name." +msgstr "आपको एक नॉन-एम्प्टी नाम देना होगा." -#: driver.cpp:385 foomatic2loader.cpp:268 -msgid "Adjustments" -msgstr "समायोजन" +#: management/kmspecialprinterdlg.cpp:178 +#, c-format +msgid "Invalid settings. %1." +msgstr "अवैध विन्यास. %1." -#: kmprinter.cpp:144 -msgid "(rejecting jobs)" -msgstr "(कार्य अस्वीकृत किया जा रहा है)" +#: management/kmspecialprinterdlg.cpp:197 +#, c-format +msgid "Configuring %1" +msgstr " %1 कॉन्फ़िगर करने में" -#: kmprinter.cpp:144 -msgid "(accepting jobs)" -msgstr "(कार्य स्वीकृत किया जा रहा है)" +#: management/kmwdriverselect.cpp:37 +msgid "Driver Selection" +msgstr "ड्राइवर चयन" -#: management/kmmainview.cpp:72 +#: management/kmwdriverselect.cpp:43 msgid "" -"The printer %1 already exists. Continuing will overwrite existing printer. Do " -"you want to continue?" +"Several drivers have been detected for this model. Select the driver you " +"want to use. You will have the opportunity to test it as well as to change it " +"if necessary.
" msgstr "" -"प्रिंटर %1 पहले से ही अस्तित्व में है. जारी रखने पर मौज़ूदा प्रिंटर मिटाकर लिख " -"दिया जाएगा. क्या आप जारी रखना चाहेंगे?" -#: management/kmmainview.cpp:133 management/kmmainview.cpp:783 -#: management/kmmainview.cpp:859 management/kmmainview.cpp:883 -msgid "Initializing manager..." -msgstr "प्रबंधक प्रारंभ किया जा रहा है..." +#: management/kmwdriverselect.cpp:46 +msgid "Driver Information" +msgstr "ड्राइवर जानकारी" -#: management/kmmainview.cpp:180 -msgid "&Icons,&List,&Tree" -msgstr "प्रतीक (&I),सूची (L&),ट्री (T&)" +#: management/kmwdriverselect.cpp:62 +msgid "You must select a driver." +msgstr "आपको एक ड्राइवर चुनना होगा." -#: management/kmmainview.cpp:184 -msgid "Start/Stop Printer" -msgstr "प्रिंटर प्रारंभ/बंद" +#: management/kmwdriverselect.cpp:82 +msgid " [recommended]" +msgstr "[अनुशंसित]" -#: management/kmmainview.cpp:186 -msgid "&Start Printer" -msgstr "प्रिंटर प्रारंभ (&S)" +#: management/kmwdriverselect.cpp:113 +msgid "No information about the selected driver." +msgstr "चुने गए ड्राइवर के बारे में जानकारी उपलब्ध नहीं है." -#: management/kmmainview.cpp:187 -msgid "Sto&p Printer" -msgstr "प्रिंटर बन्द (&p)" +#: management/kmwend.cpp:33 +msgid "Confirmation" +msgstr "पुष्टिकरण" -#: management/kmmainview.cpp:189 -msgid "Enable/Disable Job Spooling" -msgstr "कार्य स्पूलिंग सक्षम/अक्षम करें " +#: management/kmwend.cpp:50 management/kmwend.cpp:106 +#: management/kmwend.cpp:109 tdefilelist.cpp:102 +msgid "Type" +msgstr "क़िस्म" -#: management/kmmainview.cpp:191 -msgid "&Enable Job Spooling" -msgstr "कार्य स्पूलिंग सक्षम करें (&E)" +#: management/kmwend.cpp:52 +msgid "Location" +msgstr "स्थान" -#: management/kmmainview.cpp:192 -msgid "&Disable Job Spooling" -msgstr "कार्य स्पूलिंग अक्षम करें (&D)" +#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59 +msgid "Members" +msgstr "सदस्य" -#: management/kmmainview.cpp:195 -msgid "&Configure..." -msgstr "कॉन्फ़िगर...(&C)" +#: management/kmwend.cpp:69 +msgid "Backend" +msgstr "बैकएण्ड" -#: management/kmmainview.cpp:196 -msgid "Add &Printer/Class..." -msgstr "जोड़ें प्रिंटर/श्रेणी... (&P)" +#: management/kmwend.cpp:74 +msgid "Device" +msgstr "उपकरण" -#: management/kmmainview.cpp:197 -msgid "Add &Special (pseudo) Printer..." -msgstr "जोड़ें विशेष (कृत्रिम) प्रिंटर... (&S)" +#: management/kmwend.cpp:77 +msgid "Printer IP" +msgstr "प्रिंटर आईपी" -#: management/kmmainview.cpp:198 -msgid "Set as &Local Default" -msgstr "स्थानीय डिफ़ॉल्ट के रूप में नियत करें (&L)" +#: management/kmwend.cpp:78 management/kmwend.cpp:89 +msgid "Port" +msgstr "पोर्ट" -#: management/kmmainview.cpp:199 -msgid "Set as &User Default" -msgstr "उपयोक्ता डिफ़ॉल्ट के रूप में नियत करें (&U)" +#: management/kmwend.cpp:81 management/kmwend.cpp:88 +msgid "Host" +msgstr "होस्ट" -#: management/kmmainview.cpp:200 -msgid "&Test Printer..." -msgstr "प्रिंटर जाँचें... (&T)" +#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 +msgid "Queue" +msgstr "क़तार में लगाएँ" -#: management/kmmainview.cpp:201 -msgid "Configure &Manager..." -msgstr "प्रबंधक कॉन्फ़िगर करें... (&M)" +#: management/kmwend.cpp:91 +msgid "Account" +msgstr "खाता" -#: management/kmmainview.cpp:202 -msgid "Initialize Manager/&View" -msgstr "प्रारंभ करें प्रबंधक/दृश्य (&V)" +#: management/kmwend.cpp:96 +msgid "URI" +msgstr "यूआरआई" -#: management/kmmainview.cpp:204 -msgid "&Orientation" -msgstr "दिशा-स्थिति (&O)" +#: management/kmwend.cpp:109 +msgid "DB driver" +msgstr "डीबी ड्राइवर" -#: management/kmmainview.cpp:207 -msgid "&Vertical,&Horizontal" -msgstr "आड़ा (&V), खड़ा (&H)" - -#: management/kmmainview.cpp:211 -msgid "R&estart Server" -msgstr "सर्वर फिर से चालू करें (&e)" - -#: management/kmmainview.cpp:212 -msgid "Configure &Server..." -msgstr "कॉन्फ़िगर सर्वर... (&S)" - -#: management/kmmainview.cpp:213 -#, fuzzy -msgid "Configure Server Access..." -msgstr "कॉन्फ़िगर सर्वर... (&S)" - -#: management/kmmainview.cpp:216 -msgid "Hide &Toolbar" -msgstr "औज़ार पट्टी छुपाएँ (&T)" +#: management/kmwend.cpp:109 +msgid "External driver" +msgstr "बाहरी ड्राइवर" -#: management/kmmainview.cpp:218 -msgid "Show Me&nu Toolbar" -msgstr "मेन्यू औज़ार पट्टी दिखाएँ (&n)" +#: management/kmwend.cpp:110 +msgid "Manufacturer" +msgstr "उत्पादक" -#: management/kmmainview.cpp:219 -msgid "Hide Me&nu Toolbar" -msgstr "मेन्यू औज़ार पट्टी छुपाएँ (&n)" +#: management/kmwend.cpp:111 +msgid "Model" +msgstr "मॉडल" -#: management/kmmainview.cpp:221 -msgid "Show Pr&inter Details" -msgstr "प्रिंटर विवरण दिखाएँ (&i)" +#: management/kmwlpd.cpp:41 +msgid "LPD Queue Information" +msgstr "एलपीडी क़तार जानकारी" -#: management/kmmainview.cpp:222 -msgid "Hide Pr&inter Details" -msgstr "प्रिंटर विवरण छुपाएँ (&i)" +#: management/kmwlpd.cpp:44 +msgid "" +"Enter the information concerning the remote LPD queue; this wizard will " +"check it before continuing.
" +msgstr "" +"रिमोट एलपीडी क़तार के बारे में जानकारी भरें; यह विज़ार्ड जारी रखने से पूर्व " +"इनकी जाँच करेगा.
" -#: management/kmmainview.cpp:226 -msgid "Toggle Printer &Filtering" -msgstr "प्रिंटर फिलटरिंग टॉगल करें (&F)" +#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34 +#: rlpr/kmwrlpr.cpp:62 +msgid "Host:" +msgstr "होस्टः" -#: management/kmmainview.cpp:230 -msgid "Pri&nter Tools" -msgstr "प्रिंटर औज़ार (&n)" +#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 +msgid "Queue:" +msgstr "क़तार में लगाएँ:" -#: management/kmmainview.cpp:295 -msgid "Print Server" -msgstr "प्रिंट सर्वर" +#: management/kmwlpd.cpp:54 +msgid "Some information is missing." +msgstr "कुछ जानकारी गुम है." -#: management/kmmainview.cpp:301 -msgid "Print Manager" -msgstr "प्रिंट प्रबंधक" +#: management/kmwlpd.cpp:61 +#, fuzzy +msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" +msgstr "" +"क़तार %1 सर्वर %2 पर नहीं मिला; जैसे भी हो, क्या आप जारी रखना चाहते हैं?" -#: management/kmmainview.cpp:334 -msgid "An error occurred while retrieving the printer list." -msgstr "प्रिंटर सूची निकालने के दौरान एक त्रुटि हुई." +#: management/kmpropmembers.cpp:40 +msgid "Class Members" +msgstr "सदस्य वर्ग" -#: management/kmmainview.cpp:511 +#: kmuimanager.cpp:158 #, c-format -msgid "Unable to modify the state of printer %1." -msgstr "प्रिंटर %1की स्थिति परिवर्धित करने में अक्षम." - -#: management/kmmainview.cpp:522 -msgid "Do you really want to remove %1?" -msgstr "क्या आप %1 को सचमुच मिटाना चाहेंगे? " +msgid "Configuration of %1" +msgstr "%1 का कॉन्फ़िगरेशन" -#: management/kmmainview.cpp:526 -#, c-format -msgid "Unable to remove special printer %1." -msgstr "विशेष प्रिंटर %1मिटाने में अक्षम." +#: cups/kmwippprinter.cpp:187 kmprinter.cpp:139 +msgid "Idle" +msgstr "निष्क्रिय" -#: management/kmmainview.cpp:529 -#, c-format -msgid "Unable to remove printer %1." -msgstr "प्रिंटर %1 मिटाने में अक्षम" +#: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140 +msgid "Processing..." +msgstr "प्रोसेसिंग..." -#: management/kmmainview.cpp:559 -#, c-format -msgid "Configure %1" -msgstr "कॉन्फ़िगर %1" +#: cups/kmwippprinter.cpp:188 kmprinter.cpp:141 +msgid "Stopped" +msgstr "रुक गया" -#: management/kmmainview.cpp:566 -#, c-format -msgid "Unable to modify settings of printer %1." -msgstr "प्रिंटर %1 का विन्यास परिवर्धित करने में अक्षम." +#: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142 +msgid "" +"_: Unknown State\n" +"Unknown" +msgstr "अज्ञात" -#: management/kmmainview.cpp:570 -#, c-format -msgid "Unable to load a valid driver for printer %1." -msgstr "प्रिंटर %1 के लिए वैध ड्राइवर लोड करने में अक्षम." +#: kmprinter.cpp:144 +msgid "(rejecting jobs)" +msgstr "(कार्य अस्वीकृत किया जा रहा है)" -#: management/kmmainview.cpp:582 -msgid "Unable to create printer." -msgstr "प्रिंटर बनाने में असफल." +#: kmprinter.cpp:144 +msgid "(accepting jobs)" +msgstr "(कार्य स्वीकृत किया जा रहा है)" -#: management/kmmainview.cpp:594 -msgid "Unable to define printer %1 as default." -msgstr "प्रिंटर %1 को डिफ़ॉल्ट की तरह पारिभाषित करने में अक्षम." +#: kmprinter.cpp:197 kprintdialog.cpp:983 +msgid "All Files" +msgstr "सभी फ़ाइलें" -#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629 -msgid "You are about to print a test page on %1. Do you want to continue?" +#: kpqtpage.cpp:70 +msgid "" +"The exact list of choices depends on the printer driver (\"PPD\") you have " +"installed.
Note 1: the page images get scaled down accordingly to print 2 or 4 " +"pages per sheet. The page image does not get scaled if you print 1 page per " +"sheet (the default setting.). " +"
Note 2: If you select multiple pages per sheet here, the scaling and " +"re-arranging is done by your printing system. " +"
Note 3, regarding \"Other\": You cannot really select Other " +"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " +"information purposes only. " +"
To select 8, 9, 16 or other numbers of pages per sheet: " +"
%1
" -msgstr "प्रबंधक:%1
से त्रुटि संदेश प्राप्त" +#: kpqtpage.cpp:102 +msgid "" +"You can select 2 alternatives: " +"
Use this combo box to select the printer to which you want to print. " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " +"PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " +"a real printer, you need to... " +"
Note: It may happen that you successfully connected to a remote CUPS " +"server and still do not get a printer list. If this happens: force TDEPrint to " +"re-load its configuration files. To reload the configuration files, either " +"start kprinter again, or use the switch the print system away from CUPS and " +"back again once. The print system switch can be made through a selection in " +"the drop-down menu at bottom of this dialog when fully expanded).
This button opens a dialog where you can make decisions regarding all " +"supported print job options.
This button reduces the list of visible printers to a shorter, more " +"convenient, pre-defined list.
" +"This is particularly useful in enterprise environments with lots of " +"printers. The default is to show all printers.
" +"To create a personal 'selective view list', click on the " +"'System Options' button at the bottom of this dialog. Then, in the new " +"dialog, select 'Filter' (left column in the " +"TDE Print Configuration dialog) and setup your selection..
" +"Warning: Clicking this button without prior creation of a personal " +"'selective view list' will make all printers dissappear from the " +"view. (To re-enable all printers, just click this button again.)
This button starts the TDE Add Printer Wizard.
" +"Use the Wizard (with \"CUPS\" or \"RLPR\"" +") to add locally defined printers to your system.
" +"Note: The TDE Add Printer Wizard does not " +"work, and this button is disabled if you use \"Generic LPD\", " +"\"LPRng\", or \"Print Through an External Program\".)
Here you can enter any command that would also print for you in a " +"konsole window.
Example: " +"a2ps -P <printername> --medium=A3.
This button shows or hides additional printing options.
This button starts a new dialog where you can adjust various settings of " +"your printing system. Amongst them: " +"
If you enable this checkbox, the printing dialog stays open after you hit " +"the Print button.
" +"This is especially useful, if you need to test various print settings (like " +"color matching for an inkjet printer) or if you want to send your job to " +"multiple printers (one after the other) to have it finished more quickly.
" +"Now you can test the printer before finishing installation. Use the " -"Settings button to configure the printer driver and the Test " -"button to test your configuration. Use the Back " -"button to change the driver (your current configuration will be discarded).
" +"%1
%1
This button calls the \"File Open / Browse Directories\" dialog to allow you " +"to select a file for printing. Note, that " +"
Note: The preview feature (and therefore this checkbox) is only " +"visible for printjobs created from inside TDE applications. If you start " +"kprinter from the commandline, or if you use kprinter as a print command for " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"preview is not available here.
Note: (Button is only visible if the checkbox for " +"System Options --> General --> Miscellaneous: " +"\"Defaults to the last printer used in the application\" " +"is disabled.)
Command objects perform a conversion from input to output."
-" This combo box shows (and lets you select) a print subsystem to be used by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
+"itself upon first startup. Most Linux distributions have \"CUPS\", the "
+"Common UNIX Printing System. Locally-connected printer Use this for a printer connected to the computer via a parallel, serial or "
-"USB port. This line shows which CUPS server your PC is currently connected to for "
+"printing and retrieving printer info. To switch to a different CUPS server, "
+"click \"System Options\", then select \"Cups server\" and fill in the required "
+"info. Shared Windows printer Use this for a printer installed on a Windows server and shared on the "
-"network using the SMB protocol (samba).
They are used as the basis to build both print filters and special "
-"printers. They are described by a command string, a set of options, a set of "
-"requirements and associated mime types. Here you can create new command objects "
-"and edit existing ones. All changes will only be effective for you."
+"The %1 executable could not be found in your path. Check your "
+"installation."
msgstr ""
+"आपके पथ में एक्जीक्यूटेबल %1 पाया नहीं जा सका. कृपया अपना संस्थापन "
+"जाँचें"
-#: management/tdeprint_management_module.cpp:48
-msgid "Select Command"
-msgstr "कमांड चुनें"
-
-#: management/kmwbackend.cpp:54
-msgid "Backend Selection"
-msgstr "बैकएण्ड चयन"
+#: rlpr/krlprprinterimpl.cpp:73
+msgid "The printer is incompletely defined. Try to reinstall it."
+msgstr "प्रिंटर अपूर्ण पारिभाषित है. इसे फिर से संस्थापित करने की कोशिश करें."
-#: management/kmwbackend.cpp:68
-msgid "You must select a backend."
-msgstr "आपको एक बैकएण्ड चुनना होगा."
+#: plugincombobox.cpp:33
+msgid ""
+"
Print queue on a remote LPD server
" -"Use this for a print queue existing on a remote machine running a LPD print " -"server.
Network TCP printer
" -"Use this for a network-enabled printer using TCP (usually on port 9100) as " -"communication protocol. Most network printers can use this mode.
Unable to perform the requested page selection. The filter psselect " +"cannot be inserted in the current filter chain. See Filter " +"tab in the printer properties dialog for further information.
" msgstr "" -#: management/kmwfile.cpp:35 -msgid "File Selection" -msgstr "फ़ाइल चयन" +#: kprinterimpl.cpp:355 +msgid "Could not load filter description for %1.
" +msgstr "%1 के लिए फ़िल्टर वर्णन लोड नहीं कर सका.
" -#: management/kmwfile.cpp:41 +#: kprinterimpl.cpp:371 msgid "" -"The printing will be redirected to a file. Enter here the path of the file " -"you want to use for redirection. Use an absolute path or the browse button for " -"graphical selection.
" +"Error while reading filter description for %1" +". Empty command line received.
" msgstr "" +"%1 के लिए फ़िल्टर वर्णन पढ़ने में त्रुटि. खाली कमांड पंक्ति प्राप्त " +"हुई.
" -#: management/kmwfile.cpp:44 -msgid "Print to file:" -msgstr "फ़ाइल में छापेंः" +#: kprinterimpl.cpp:385 +msgid "" +"The MIME type %1 is not supported as input of the filter chain (this may happen " +"with non-CUPS spoolers when performing page selection on a non-PostScript " +"file). Do you want TDE to convert the file to a supported format?" +msgstr "" -#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60 -msgid "Empty file name." -msgstr "फ़ाइल नाम खाली है." +#: kprinterimpl.cpp:389 kprinterimpl.cpp:509 +msgid "Convert" +msgstr "बदलें" -#: management/kmwfile.cpp:66 -msgid "Directory does not exist." -msgstr "डिरेक्ट्री अस्तित्व में नहीं है." +#: kprinterimpl.cpp:399 +msgid "Select MIME Type" +msgstr "माइम क़िस्म चुनें" -#: management/kmdriverdbwidget.cpp:51 -msgid "&PostScript printer" -msgstr "पोस्ट-स्क्रिप्ट प्रिंटर (&P)" +#: kprinterimpl.cpp:400 +msgid "Select the target format for the conversion:" +msgstr "कन्वर्सन के लिए टार्गेट फॉर्मेट चुनें:" -#: management/kmdriverdbwidget.cpp:52 -msgid "&Raw printer (no driver needed)" -msgstr "रॉ प्रिंटर (कोई ड्राइवर आवश्यक नहीं) (&R)" +#: kprinterimpl.cpp:404 kprinterimpl.cpp:430 +msgid "Operation aborted." +msgstr "ऑपरेशन छोड़ा." -#: management/kmdriverdbwidget.cpp:55 -msgid "&Other..." -msgstr "अन्य...(&O)" +#: kprinterimpl.cpp:410 +msgid "No appropriate filter found. Select another target format." +msgstr "कोई उपयुक्त फ़िल्टर नहीं मिला. अन्य टार्गेट फॉर्मेट चुनें." -#: management/kmdriverdbwidget.cpp:56 -msgid "&Manufacturer:" -msgstr "उत्पादक: (&M)" +#: kprinterimpl.cpp:423 +msgid "" +"%1
This button calls a little dialog to let you select a filter here.
" +"Note 1: You can chain different filters as long as you make sure " +"that the output of one fits as input of the next. (TDEPrint checks your " +"filtering chain and will warn you if you fail to do so.
" +"Note 2: The filters you define here are applied to your jobfile " +"before it is handed downstream to your spooler and print subsystem " +"(e.g. CUPS, LPRng, LPD).
This button removes the highlighted filter from the list of filters.
This button moves the highlighted filter up in the list of filters, towards " +"the front of the filtering chain.
यह बटन उभारे गए फ़ाइल को मुद्रित की जाने वाली फ़ाइलों की सूची के सबसे ऊपर ले " +"जाता है.
" +"नतीजतन, यह फ़ाइलों के प्रिंटआउट के अनुक्रम को बदलता है
This button moves the highlighted filter down in the list of filters, " +"towards the end of the filtering chain..
यह बटन उभारे गए फ़ाइल को मुद्रित की जाने वाली फ़ाइलों की सूची के सबसे नीचे " +"ले जाता है.
" +"नतीजतन, यह फ़ाइलों के प्रिंटआउट के अनुक्रम को बदलता है
This button lets you configure the currently highlighted filter. It opens a " +"separate dialog.
This field shows some general info about the selected filter. Amongst them " +"are: " +"
This field shows which filters are currently selected to act as " +"'pre-filters' for TDEPrint. Pre-filters are processing the print files " +"before they are send downstream to your real print subsystem.
" +"The list shown in this field may be empty (default).
" +"The pre-filters act on the printjob in the order they are listed (from top " +"to bottom). This is done by acting as a filtering chain " +"where the output of one filter acts as input to the next. By putting the " +"filters into the wrong order, you can make the filtering chain fail. For " +"example: if your file is ASCII text, and you want the output being processed " +"by the 'Multipage per Sheet' filter, the first filter must be one that " +"processes ASCII into PostScript.
" +"TDEPrint can utilize any external filtering program which you may " +"find useful through this interface.
" +"TDEPrint ships preconfigured with support for a selection of common filters. " +"These filters however need to be installed independently from TDEPrint. These " +"pre-filters work for all print subsystems supported by TDEPrint (such " +"as CUPS, LPRng and LPD), because they are not depending on these.
." +"Amongst the pre-configured filters shipping with TDEPrint are:
" +"Please click on the other elements of this dialog to learn more about the " +"TDEPrint pre-filters.
The filter chain is wrong. The output format of at least one filter is not " +"supported by its follower. See Filters tab for more information.
" +msgstr "" + +#: kpfilterpage.cpp:408 +msgid "Input" +msgstr "इनपुट" + +#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217 +msgid "Output" +msgstr "आउटपुट" + +#: kpfileselectpage.cpp:33 +msgid "&Files" +msgstr "फ़ाइलें (&F)" + +#: kprintpreview.cpp:140 +msgid "Do you want to continue printing anyway?" +msgstr "जैसे भी हो, क्या आप जारी रखना चाहते हैं?" + +#: kprintpreview.cpp:148 kprintpreview.cpp:227 +msgid "Print Preview" +msgstr "छपाई नमूना" + +#: kprintpreview.cpp:278 +msgid "" +"The preview program %1 cannot be found. Check that the program is correctly " +"installed and located in a directory included in your PATH environment " +"variable." +msgstr "" +"पूर्वावलोकन प्रोग्राम %1 पाया नहीं जा सका. जाँचें कि प्रोग्राम उचित प्रकार " +"संस्थापित है तथा आपके एनवायरनमेंट वेरिएबल पथ में शामिल डिरेक्ट्री में स्थित है." + +#: kprintpreview.cpp:303 +msgid "" +"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any " +"other external PostScript viewer could be found." +msgstr "" +"पूर्वावलोकन असफलः न तो आंतरिक केडीई पोस्ट-स्क्रिप्ट प्रदर्शक (के-घोस्ट-व्यू) न " +"ही अन्य बाहरी पोस्ट-स्क्रिप्ट प्रदर्शक पाया जा सका." + +#: kprintpreview.cpp:307 +#, c-format +msgid "" +"Preview failed: TDE could not find any application to preview files of type %1." +msgstr "" +"पूर्वावलोकन असफलः केडीई द्वारा फ़ाइल क़िस्म %1 के पूर्वावलोकन के लिए कोई " +"अनुप्रयोग नहीं पा सका." + +#: kprintpreview.cpp:317 +#, c-format +msgid "Preview failed: unable to start program %1." +msgstr "पूर्वावलोकन असफलः प्रोग्राम %1 प्रारंभ करने में अक्षम." + +#: kprintpreview.cpp:322 +msgid "Do you want to continue printing?" +msgstr "क्या आप छापना जारी रखना चाहते हैं?" + +#: kpdriverpage.cpp:48 +#, fuzzy +msgid "" +"Brightness: Slider to control the brightness value of all colors " +"used.
" +"The brightness value can range from 0 to 200. Values greater than 100 will " +"lighten the print. Values less than 100 will darken the print.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o brightness=... # use range from \"0\" to \"200\"" +"
Hue (Tint): Slider to control the hue value for color rotation.
" +"The hue value is a number from -360 to 360 and represents the color hue " +"rotation. The following table summarizes the change you will see for the base " +"colors: " +"
Original | " +"hue=-45 | " +"hue=45 |
---|---|---|
Red | " +"Purple | " +"Yellow-orange |
Green | " +"Yellow-green | " +"Blue-green |
Yellow | " +"Orange | " +"Green-yellow |
Blue | " +"Sky-blue | " +"Purple |
Magenta | " +"Indigo | " +"Crimson |
Cyan | " +"Blue-green | " +"Light-navy-blue |
Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o hue=... # use range from \"-360\" to \"360\"
Saturation: Slider to control the saturation value for all colors " +"used.
" +"The saturation value adjusts the saturation of the colors in an image, " +"similar to the color knob on your television. The color saturation value.can " +"range from 0 to 200. On inkjet printers, a higher saturation value uses more " +"ink. On laserjet printers, a higher saturation uses more toner. A color " +"saturation of 0 produces a black-and-white print, while a value of 200 will " +"make the colors extremely intense.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o saturation=... # use range from \"0\" to \"200\"" +"
Gamma: Slider to control the gamma value for color correction.
" +"The gamma value can range from 1 to 3000. A gamma values greater than 1000 " +"lightens the print. A gamma value less than 1000 darken the print. The default " +"gamma is 1000.
" +"Note:
the gamma value adjustment is not visible in the thumbnail " +"preview. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o gamma=... # use range from \"1\" to \"3000\"" +"
Image Printing Options
" +"All options controlled on this page only apply to printing images. Most " +"image file formats are supported. To name a few: JPEG, TIFF, PNG, GIF, PNM " +"(PBM/PGM/PNM/PPM), Sun Raster, SGI RGB, Windows BMP. Options to influence color " +"output of image printouts are: " +"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " +"settings, please look at the 'WhatsThis' items provided for these controls. " +"
Coloration Preview Thumbnail
" +"The coloration preview thumbnail indicates change of image coloration by " +"different settings. Options to influence output are: " +"
For a more detailed explanation about Brightness, Hue, Saturation and Gamma " +"settings, please look at the 'WhatsThis' items provided for these controls. " +"
Image Size: Dropdown menu to control the image size on the printed " +"paper. Dropdown works in conjunction with slider below. Dropdown options " +"are:.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o natural-scaling=... # range in % is 1....800 " +"" +"
-o scaling=... # range in % is 1....800 " +"
-o ppi=... # range in ppi is 1...1200
Position Preview Thumbnail
" +"This position preview thumbnail indicates the position of the image on the " +"paper sheet. " +"
Click on horizontal and vertical radio buttons to move image alignment on " +"paper around. Options are: " +"
Reset to Default Values
" +"Reset all coloration settings to default values. Default values are: " +"
Image Positioning:
" +"Select a pair of radiobuttons to move image to the position you want on the " +"paper printout. Default is 'center'.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o position=... # examples: \"top-left\" or \"bottom\"" +"
Characters Per Inch
" +"This setting controls the horizontal size of characters when printing a text " +"file.
" +"The default value is 10, meaning that the font is scaled in a way that 10 " +"characters per inch will be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o cpi=... # example: \"8\" or \"12\"
Lines Per Inch
" +"This setting controls the vertical size of characters when printing a text " +"file.
" +"The default value is 6, meaning that the font is scaled in a way that 6 " +"lines per inch will be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o lpi=... # example \"5\" or \"7\"
Columns
" +"This setting controls how many columns of text will be printed on each page " +"when. printing text files.
" +"The default value is 1, meaning that only one column of text per page will " +"be printed.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o columns=... # example: \"2\" or \"4\"
Text Formats
" +"These settings control the appearance of text on printouts. They are only " +"valid for printing text files or input directly through kprinter.
" +"Note: These settings have no effect whatsoever for other input " +"formats than text, or for printing from applications such as the KDE Advanced " +"Text Editor. (Applications in general send PostScript to the print system, and " +"'kate' in particular has its own knobs to control the print output.
. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o cpi=... # example: \"8\" or \"12\" " +"
-o lpi=... # example: \"5\" or \"7\" " +"
-o columns=... # example: \"2\" or \"4\"
Margins
" +"These settings control the margins of printouts on the paper. They are not " +"valid for jobs originating from applications which define their own page " +"layout internally and send PostScript to TDEPrint (such as KOffice or " +"OpenOffice.org).
" +"When printing from KDE applications, such as KMail and Konqueror, or " +"printing an ASCII text file through kprinter, you can choose your preferred " +"margin settings here.
" +"Margins may be set individually for each edge of the paper. The combo box at " +"the bottom lets you change the units of measurement between Pixels, " +"Millimeters, Centimeters, and Inches.
" +"You can even use the mouse to grab one margin and drag it to the intended " +"position (see the preview picture on the right side).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-top=... # example: \"72\" " +"
-o page-bottom=... # example: \"24\" " +"
-o page-left=... # example: \"36\" " +"
-o page-right=... # example: \"12\"
Turn Text Printing with Syntax Highlighting (Prettyprint) On!
" +"ASCII text file printouts can be 'prettyfied' by enabling this option. If " +"you do so, a header is printed at the top of each page. The header contains " +"the page number, job title (usually the filename), and the date. In addition, C " +"and C++ keywords are highlighted, and comment lines are italicized.
" +"This prettyprint option is handled by CUPS.
" +"If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=true.
Turn Text Printing with Syntax Highlighting (Prettyprint) Off!
" +"ASCII text file printing with this option turned off are appearing without a " +"page header and without syntax highlighting. (You can still set the page " +"margins, though.)
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=false
Print Text with Syntax Highlighting (Prettyprint)
" +"ASCII file printouts can be 'prettyfied' by enabling this option. If you do " +"so, a header is printed at the top of each page. The header contains the page " +"number, job title (usually the filename), and the date. In addition, C and C++ " +"keywords are highlighted, and comment lines are italicized.
" +"This prettyprint option is handled by CUPS.
" +"If you prefer another 'plaintext-to-prettyprint' converter, look for the " +"enscript pre-filter on the Filters tab.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o prettyprint=true. " +"
-o prettyprint=false
%1
Print queue on remote CUPS server
" +"Use this for a print queue installed on a remote machine running a CUPS " +"server. This allows to use remote printers when CUPS browsing is turned off.
" +"%1
Network IPP printer
" +"Use this for a network-enabled printer using the IPP protocol. Modern " +"high-end printers can use this mode. Use this mode instead of TCP if your " +"printer can do both.
Fax/Modem printer
" +"Use this for a fax/modem printer. This requires the installation of the fax4CUPS " +"backend. Documents sent on this printer will be faxed to the given target fax " +"number.
Other printer
" +"Use this for any printer type. To use this option, you must know the URI of " +"the printer you want to install. Refer to the CUPS documentation for more " +"information about the printer URI. This option is mainly useful for printer " +"types using 3rd party backends not covered by the other possibilities.
Enter the information concerning your printer or class. Name " -"is mandatory, Location and Description " -"are not (they may even not be used on some systems).
" +"Class of printers
" +"Use this to create a class of printers. When sending a document to a class, " +"the document is actually sent to the first available (idle) printer in the " +"class. Refer to the CUPS documentation for more information about class of " +"printers.
This backend may require a login/password to work properly. Select the type " -"of access to use and fill in the login and password entries if needed.
" -msgstr "" +#: cups/kmcupsuimanager.cpp:236 +msgid "Priority" +msgstr "प्राथमिकता" -#: management/kmwpassword.cpp:49 -msgid "&Login:" -msgstr "लॉगइनः (&L)" +#: cups/kmcupsuimanager.cpp:238 +msgid "Billing Information" +msgstr "बिलिंग जानकारी" -#: management/kmwpassword.cpp:53 -msgid "&Anonymous (no login/password)" -msgstr "अज्ञातनाम (कोई लॉगइन/पासवर्ड नहीं) (&A)" +#: cups/ipprequest.cpp:164 +msgid "You don't have access to the requested resource." +msgstr "आपके पास निवेदित रिसोर्स के लिए पहूँच अनुमति नहीं है." -#: management/kmwpassword.cpp:54 -msgid "&Guest account (login=\"guest\")" -msgstr "मेहमान ख़ाता (लॉगइन=\"guest\") (&G)" +#: cups/ipprequest.cpp:167 +msgid "You are not authorized to access the requested resource." +msgstr "आपके पास निवेदित रिसोर्स पर पहूँच के लिए अधिकार नहीं है." -#: management/kmwpassword.cpp:55 -msgid "Nor&mal account" -msgstr "सामान्य ख़ाता (&m)" +#: cups/ipprequest.cpp:170 +msgid "The requested operation cannot be completed." +msgstr "निवेदित आपरेशन पूरा नहीं हो सकता." -#: management/kmwpassword.cpp:88 -msgid "Select one option" -msgstr "एक विकल्प चुनें" +#: cups/ipprequest.cpp:173 +msgid "The requested service is currently unavailable." +msgstr "निवेदित सेवा वर्तमान में अनुपलब्ध है." -#: management/kmwpassword.cpp:90 -msgid "User name is empty." -msgstr "उपयोक्ता नाम खाली है." +#: cups/ipprequest.cpp:176 +msgid "The target printer is not accepting print jobs." +msgstr "लक्षित प्रिंटर छपाई कार्य स्वीकार नहीं कर रहा है." -#: management/kmwdriverselect.cpp:37 -msgid "Driver Selection" -msgstr "ड्राइवर चयन" +#: cups/ipprequest.cpp:313 +msgid "" +"Connection to CUPS server failed. Check that the CUPS server is correctly " +"installed and running." +msgstr "" +"कप्स सर्वर से कनेक्शन असफल. जाँच करें कि कप्स सर्वर उचित प्रकार संस्थापित हे " +"तथा चल रहा है." + +#: cups/ipprequest.cpp:316 +msgid "The IPP request failed for an unknown reason." +msgstr "अज्ञात कारणों से आईपीपी निवेदन असफल" -#: management/kmwdriverselect.cpp:43 -msgid "" -"Several drivers have been detected for this model. Select the driver you " -"want to use. You will have the opportunity to test it as well as to change it " -"if necessary.
" -msgstr "" +#: cups/ipprequest.cpp:461 +msgid "Attribute" +msgstr "विशेषता" -#: management/kmwdriverselect.cpp:46 -msgid "Driver Information" -msgstr "ड्राइवर जानकारी" +#: cups/ipprequest.cpp:462 +msgid "Values" +msgstr "मान" -#: management/kmwdriverselect.cpp:62 -msgid "You must select a driver." -msgstr "आपको एक ड्राइवर चुनना होगा." +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "True" +msgstr "सही" -#: management/kmwdriverselect.cpp:82 -msgid " [recommended]" -msgstr "[अनुशंसित]" +#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567 +msgid "False" +msgstr "गलत" -#: management/kmwdriverselect.cpp:113 -msgid "No information about the selected driver." -msgstr "चुने गए ड्राइवर के बारे में जानकारी उपलब्ध नहीं है." +#: cups/kmwfax.cpp:39 +msgid "Fax Serial Device" +msgstr "फैक्स सीरियल उपकरण" -#: management/kmpropbackend.cpp:34 -msgid "Printer type:" -msgstr "प्रिंटर क़िस्मः" +#: cups/kmwfax.cpp:43 +msgid "Select the device which your serial Fax/Modem is connected to.
" +msgstr "आपके सीरियल फैक्स/मॉडेम से जुड़े उपकरण चुनें.
" -#: management/kmpropbackend.cpp:48 -msgid "Interface" -msgstr "इंटरफेस" +#: cups/kmwfax.cpp:81 +msgid "You must select a device." +msgstr "आपको एक उपकरण चुनना होगा." -#: management/kmpropbackend.cpp:49 -msgid "Interface Settings" -msgstr "इंटरफेस विन्यास " +#: cups/kphpgl2page.cpp:33 +msgid "" +"The 'blackplot' option specifies that all pens should plot in black-only: " +"The default is to use the colors defined in the plot file, or the standard pen " +"colors defined in the HP-GL/2 reference manual from Hewlett Packard.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o blackplot=true
The 'fitplot' option specifies that the HP-GL image should be scaled to fill " +" exactly the page with the (elsewhere selected) media size.
" +"The default is 'fitplot is disabled'. The default will therefore use the " +"absolute distances specified in the plot file. (You should be aware that HP-GL " +"files are very often CAD drawings intended for large format plotters. On " +"standard office printers they will therefore lead to the drawing printout " +"being spread across multiple pages.)
" +"Note:This feature depends upon an accurate plot size (PS) command in " +"the HP-GL/2 file. If no plot size is given in the file the filter converting " +"the HP-GL to PostScript assumes the plot is ANSI E size.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o fitplot=true
The pen width value can be set here in case the original HP-GL file does not " +"have it set. The pen width specifies the value in micrometers. The default " +"value of 1000 produces lines that are 1000 micrometers == 1 millimeter in " +"width. Specifying a pen width of 0 produces lines that are exactly 1 pixel " +"wide.
" +"Note: The penwidth option set here is ignored if the pen widths are " +"set inside the plot file itself..
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o penwidth=... # example: \"2000\" or \"500\"
All options on this page are only applicable if you use TDEPrint to send " +"HP-GL and HP-GL/2 files to one of your printers.
" +"HP-GL and HP-GL/2 are page description languages developed by " +"Hewlett-Packard to drive Pen Plotting devices.
" +"TDEPrint can (with the help of CUPS) convert the HP-GL file format and print " +"it on any installed printer.
" +"Note 1: To print HP-GL files, start 'kprinter' and simply load the " +"file into the running kprinter.
" +"Note 2: The 'fitplot' parameter provided on this dialog does also " +"work for printing PDF files (if your CUPS version is more recent than " +"1.1.22).
" +"Additional hint for power users: These TDEPrint GUI elements " +"match with CUPS commandline job option parameters: " +"
-o blackplot=... # examples: \"true\" or \"false\" " +"
-o fitplot=... # examples: \"true\" or \"false\" " +"
-o penwidth=... # examples: \"true\" or \"false\"
Samba server
Adobe Windows PostScript driver files plus the CUPS " +"printer PPD will be exported to the [print$] " +"special share of the Samba server (to change the source CUPS server, use the " +"Samba username
User needs to have write access to the " +"[print$] share on the Samba server. [print$] " +"holds printer drivers prepared for download to Windows clients. This dialog " +"does not work for Samba servers configured with security = share " +"(but works fine with security = user)." +msgstr "" -#: management/kmwsocket.cpp:110 -msgid "Wrong port number." -msgstr "गलत पोर्ट क्रमांक." +#: cups/cupsaddsmb2.cpp:96 +msgid "" +"Samba password
The Samba setting encrypt passwords = yes " +"(default) requires prior use of smbpasswd -a [username] " +"command, to create an encrypted Samba password and have Samba recognize it." +msgstr "" -#: management/kmwizard.cpp:64 management/kmwizard.cpp:209 -msgid "&Next >" -msgstr "अगला (&N) >" +#: cups/cupsaddsmb2.cpp:267 +#, c-format +msgid "Creating folder %1" +msgstr "फ़ोल्डर बनाया जा रहा है %1" + +#: cups/cupsaddsmb2.cpp:275 +#, c-format +msgid "Uploading %1" +msgstr "अपलोडिंग %1" -#: management/kmwizard.cpp:66 -msgid "< &Back" -msgstr "<पिछला (&B)" +#: cups/cupsaddsmb2.cpp:283 +#, c-format +msgid "Installing driver for %1" +msgstr "%1 के लिए ड्राइवर संस्थापित किया जा रहा है" -#: management/kmwizard.cpp:131 management/kmwizard.cpp:166 -#: management/kmwizard.cpp:191 -msgid "Add Printer Wizard" -msgstr "प्रिंटर जोड़ें विज़ार्ड" +#: cups/cupsaddsmb2.cpp:291 +#, c-format +msgid "Installing printer %1" +msgstr "प्रिंटर %1 संस्थापित किया जा रहा है" -#: management/kmwizard.cpp:166 -msgid "Modify Printer" -msgstr "प्रिंटर परिवर्धित करें" +#: cups/cupsaddsmb2.cpp:333 +msgid "Driver successfully exported." +msgstr "ड्राइवर सफलता पूर्वक निर्यात किया." -#: management/kmwizard.cpp:191 -msgid "Unable to find the requested page." -msgstr "निवेदित पृष्ठ पाने में अक्षम" +#: cups/cupsaddsmb2.cpp:343 +msgid "" +"Operation failed. Possible reasons are: permission denied or invalid Samba " +"configuration (see cupsaddsmb " +"manual page for detailed information, you need " +"CUPS version 1.1.11 or higher). You may want to try again with another " +"login/password." +msgstr "" -#: management/kmwizard.cpp:207 management/kmwizard.cpp:234 -msgid "&Finish" -msgstr "समाप्त (&F)" +#: cups/cupsaddsmb2.cpp:352 +msgid "Operation aborted (process killed)." +msgstr "ऑपरेशन छोड़ा (प्रक्रिया ख़त्म)" -#: management/kmwinfopage.cpp:32 -msgid "Introduction" -msgstr "परिचय" +#: cups/cupsaddsmb2.cpp:358 +msgid "%1
" +msgstr "%1
" -#: management/kmwinfopage.cpp:37 -#, fuzzy +#: cups/cupsaddsmb2.cpp:373 msgid "" -"Welcome,
" -"This wizard will help to install a new printer on your computer. It will " -"guide you through the various steps of the process of installing and " -"configuring a printer for your printing system. At each step, you can always go " -"back using the Back button.
" -"We hope you enjoy this tool!
" -"सुस्वागतम्,
" -"यह विशेषज्ञ आपको आपके कम्प्यूटर पर नया प्रिंटर संस्थापित करने में मदद करेगा. " -"यह आपको आपके छपाई तंत्र में प्रिंटर संस्थापन तथा कॉन्फ़िगरेशन के विभिन्न चरणों " -"में मार्गदर्शन देगा. प्रत्येक चरण में आप हमेशा ही पीछे जा सकते हैं पीछे " -"बटन के उपयोग से.
" -"हमें उम्मीद है कि आप इस औज़ार का उपभोग करेंगे!
" -"केडीई प्रिंटर दल.
" -#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59 -msgid "Jobs" -msgstr "कार्य" +#: cups/cupsaddsmb2.cpp:393 +msgid "" +"Some driver files are missing. You can get them on Adobe web site. See cupsaddsmb manual page for more details (you need " +"CUPS version 1.1.11 or higher)." +msgstr "" -#: management/kmconfigjobs.cpp:37 -msgid "Jobs Shown" -msgstr "कार्य दिखाया" +#: cups/cupsaddsmb2.cpp:404 +#, c-format +msgid "Preparing to upload driver to host %1" +msgstr "होस्ट %1 पर ड्राइवर अपलोड करने की तैयारी में" -#: management/kmconfigjobs.cpp:42 -msgid "Maximum number of jobs shown:" -msgstr "दिखाए जाने वाले कार्य की अधिकतम संख्या" +#: cups/cupsaddsmb2.cpp:415 +msgid "The driver for printer %1 could not be found." +msgstr "प्रिंटर %1 के लिए ड्राइवर पाया नहीं जा सका." -#: management/kxmlcommanddlg.cpp:108 -msgid "Integer" -msgstr "पूर्णांक" +#: cups/cupsaddsmb2.cpp:455 +#, c-format +msgid "Preparing to install driver on host %1" +msgstr "होस्ट %1 पर ड्राइवर संस्थापित करने की तैयारी में" -#: management/kxmlcommanddlg.cpp:109 -msgid "Float" -msgstr "फ्लोट" +#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36 +msgid "Users Access Settings" +msgstr "उपयोक्ता पहुँच विन्यास" -#: management/kxmlcommanddlg.cpp:110 -msgid "List" -msgstr "सूची" +#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39 +msgid "Users" +msgstr "उपयोक्ता" -#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115 -#: management/kxmlcommanddlg.cpp:866 -msgid "&Description:" -msgstr "वर्णनः (&D)" +#: cups/kmwusers.cpp:41 +msgid "Allowed Users" +msgstr "अनुमति प्राप्त उपयोक्ता" -#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116 -msgid "&Format:" -msgstr "फॉर्मेट: (&F)" +#: cups/kmwusers.cpp:42 +msgid "Denied Users" +msgstr "नकारे गए उपयोक्ता" -#: management/kxmlcommanddlg.cpp:118 -msgid "Default &value:" -msgstr "डिफ़ॉल्ट मान: (&v)" +#: cups/kmwusers.cpp:44 +msgid "Define here a group of allowed/denied users for this printer." +msgstr "" +"इस प्रिंटर के लिए स्वीकार्य/नकारे गए उपयोक्ता समूह को यहाँ पारिभाषित करें." -#: management/kxmlcommanddlg.cpp:119 -msgid "Co&mmand:" -msgstr "कमांडः (&m)" +#: cups/kmwippprinter.cpp:45 +msgid "IPP Printer Information" +msgstr "आईपीपी प्रिंटर जानकारी" -#: management/kxmlcommanddlg.cpp:126 -msgid "&Persistent option" -msgstr "परसिस्टेंट विकल्प (&P)" +#: cups/kmwippprinter.cpp:55 +msgid "&Printer URI:" +msgstr "प्रिंटर यूआरआई: (&P)" -#: management/kxmlcommanddlg.cpp:128 -msgid "Va&lues" -msgstr "मान (&l)" +#: cups/kmwippprinter.cpp:64 +msgid "" +"Either enter the printer URI directly, or use the network scanning " +"facility.
" +msgstr "" +"या तो प्रिंटर यूआरआई सीधे ही भरें, या नेटवर्क स्कैनिंग सुविधा इस्तेमाल " +"करें.
" -#: management/kxmlcommanddlg.cpp:136 -msgid "Minimum v&alue:" -msgstr "न्यूनतम मानः (&a)" +#: cups/kmwippprinter.cpp:65 +msgid "&IPP Report" +msgstr "आईपीपी रिपोर्ट (&I)" -#: management/kxmlcommanddlg.cpp:137 -msgid "Ma&ximum value:" -msgstr "अधिकतम मानः (&x)" +#: cups/kmwippprinter.cpp:112 +msgid "You must enter a printer URI." +msgstr "आपको एक प्रिंटर यूआरआई प्रविष्ट करना होगा." -#: management/kmwend.cpp:53 management/kmwend.cpp:112 -#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545 -msgid "Description" -msgstr "वर्णन" +#: cups/kmwippprinter.cpp:173 +msgid "Name: %1Enter the information concerning the remote IPP server owning the targeted " +"printer. This wizard will poll the server before continuing.
" +msgstr "" +"रिमोट आईपीपी सर्वर के बारे में जानकारी भरें जो लक्षित प्रिंटर का स्वामी है. " +"यह विशेषज्ञ जारी रखने से पूर्व सर्वर को पोल करेगा.
" -#: management/kxmlcommanddlg.cpp:163 -msgid "O&utput To" -msgstr "को आउटपुट (&u)" +#: cups/kmwipp.cpp:43 +msgid "Port:" +msgstr "पोर्टः" -#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166 -msgid "File:" -msgstr "फ़ाइलः" +#: cups/kmwipp.cpp:59 +msgid "Incorrect port number." +msgstr "गलत पोर्ट क्रमांक." -#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167 -msgid "Pipe:" -msgstr "पाइपः" +#: cups/kmwipp.cpp:72 +msgid "Print Job Billing and Accounting
" +"Insert a meaningful string here to associate the current print job with a " +"certain account. This string will appear in the CUPS \"page_log\" to help with " +"the print accounting in your organization. (Leave it empty if you do not need " +"it.) " +"
It is useful for people who print on behalf of different \"customers\", " +"like print service bureaux, letter shops, press and prepress companies, or " +"secretaries who serve different bosses, etc.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-billing=... # example: \"Marketing_Department\" or " +"\"Joe_Doe\"
Scheduled Printing
" +"Scheduled printing lets you control the time of the actual printout, while " +"you can still send away your job now and have it out of your way. " +"
Especially useful is the \"Never (hold indefinitely)\" option. It allows " +"you to park your job until a time when you (or a printer administrator) decides " +"to manually release it. " +"
This is often required in enterprise environments, where you normally are " +"not allowed to directly and immediately access the huge production printers in " +"your Central Repro Department. However it is okay to send jobs to the " +"queue which is under the control of the operators (who, after all, need to make " +"sure that the 10,000 sheets of pink paper which is required by the Marketing " +"Department for a particular job are available and loaded into the paper " +"trays).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-hold-until=... # example: \"indefinite\" or \"no-hold\" " +"
Page Labels
" +"Page Labels are printed by CUPS at the top and bottom of each page. They " +"appear on the pages surrounded by a little frame box. " +"
They contain any string you type into the line edit field.
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-label=\"...\" # example: \"Company Confidential\"" +"
Job Priority
" +"Usually CUPS prints all jobs per queue according to the \"FIFO\" principle: " +"First In, First Out. " +"
The job priority option allows you to re-order the queue according to your " +"needs. " +"
It works in both directions: you can increase as well as decrease " +"priorities. (Usually you can only control your own jobs). " +"
Since the default job priority is \"50\", any job sent with, for example, " +"\"49\" will be printed only after all those others have finished. Conversely, a " +"\"51\" or higher priority job will go right to the top of a populated queue (if " +"no other, higher prioritized one is present).
" +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o job-priority=... # example: \"10\" or \"66\" or \"99\"" +"
Enter the URI corresponding to the printer to be installed. Examples:
" +"Set here the quota for this printer. Using limits of 0 "
+"means that no quota will be used. This is equivalent to set quota period to "
+"
Select a valid detected port, or enter directly the corresponding URI in the " -"bottom edit field.
" -msgstr "" -"एक वैध, ढूंढा गया पोर्ट चुनें या सीधे ही, नीचे संपादन क्षेत्र में सम्बन्धित " -"यूआरआई भरें.
" +#: cups/kmwbanners.cpp:62 +msgid "Top Secret" +msgstr "अत्यंत गुप्त" -#: management/kmwlocal.cpp:78 -msgid "" -"_: The URI is empty\n" -"Empty URI." -msgstr "" +#: cups/kmwbanners.cpp:63 +msgid "Unclassified" +msgstr "अवर्गीकृत" -#: management/kmwlocal.cpp:83 -msgid "The local URI doesn't correspond to a detected port. Continue?" -msgstr "स्थानीय यूआरआई मिटाए गए पोर्ट से सम्बद्ध नहीं है. जारी रखें?" +#: cups/kmwbanners.cpp:86 +msgid "Banner Selection" +msgstr "ध्वज चयन" -#: management/kmwlocal.cpp:85 -msgid "Select a valid port." -msgstr "एक वैध पोर्ट चुनें." +#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92 +msgid "&Starting banner:" +msgstr "प्रारंभिक ध्वजः (&S)" -#: management/kmwlocal.cpp:166 -msgid "Unable to detect local ports." -msgstr "स्थानीय पोर्ट पता लगाने में अक्षम." +#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93 +msgid "&Ending banner:" +msgstr "अंतिम ध्वजः (&E)" -#: management/kmwlpd.cpp:41 -msgid "LPD Queue Information" -msgstr "एलपीडी क़तार जानकारी" +#: cups/kmwbanners.cpp:99 +msgid "" +"Select the default banners associated with this printer. These banners will " +"be inserted before and/or after each print job sent to the printer. If you " +"don't want to use banners, select No Banner.
" +msgstr "" -#: management/kmwlpd.cpp:44 +#: cups/kptagspage.cpp:36 msgid "" -"Enter the information concerning the remote LPD queue; this wizard will " -"check it before continuing.
" +"Additional Tags
You may send additional commands to the CUPS " +"server via this editable list. There are 3 purposes for this: " +"Standard CUPS job options: A complete list of standard CUPS job " +"options is in the CUPS User Manual" +". Mappings of the kprinter user interface widgets to respective CUPS job " +"option names are named in the various WhatsThis help items..
" +"Custom CUPS job options: CUPS print servers may be customized with " +"additional print filters and backends which understand custom job options. You " +"can specify such custom job options here. If in doubt, ask your system " +"administrator..
" +"" +"
Operator Messages: You may send additional messages to the " +"operator(s) of your production printers (e.g. in your " +"Central Repro Department
) Messages can be read by the operator(s) (or " +"yourself) by viewing the \"Job IPP Report\" for the job. " +"Examples:" +"A standard CUPS job option:" +"" +"
(Name) number-up -- (Value) 9 " +"
" +"
A job option for custom CUPS filters or backends:" +"
(Name) DANKA_watermark -- " +"(Value) Company_Confidential " +"
" +"
A message to the operator(s):" +"
(Name) Deliver_after_completion -- " +"(Value) to_Marketing_Departm." +"
Note: the fields must not include spaces, tabs or quotes. You may " +"need to double-click on a field to edit it. " +"
Warning: Do not use such standard CUPS option names which also can be " +"used through the TDEPrint GUI. Results may be unpredictable if they conflict, " +" or if they are sent multiple times. For all options supported by the GUI, " +"please do use the GUI. (Each GUI element's 'WhatsThis' names the related CUPS " +"option name.)
रिमोट एलपीडी क़तार के बारे में जानकारी भरें; यह विज़ार्ड जारी रखने से पूर्व " -"इनकी जाँच करेगा.
" -#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63 -msgid "Queue:" -msgstr "क़तार में लगाएँ:" +#: cups/kptagspage.cpp:77 +msgid "Additional Tags" +msgstr "अतिरिक्त टैग्स" -#: management/kmwlpd.cpp:54 -msgid "Some information is missing." -msgstr "कुछ जानकारी गुम है." +#: cups/kptagspage.cpp:83 +msgid "Value" +msgstr "मूल्य" -#: management/kmwlpd.cpp:61 -#, fuzzy -msgid "Cannot find queue %1 on server %2; do you want to continue anyway?" -msgstr "" -"क़तार %1 सर्वर %2 पर नहीं मिला; जैसे भी हो, क्या आप जारी रखना चाहते हैं?" +#: cups/kptagspage.cpp:92 +msgid "Read-Only" +msgstr "सिर्फ पढ़ने योग्य" -#: management/kmconfigfilter.cpp:40 -msgid "Filter" -msgstr "फ़िल्टर" +#: cups/kptagspage.cpp:115 +#, fuzzy +msgid "The tag name must not contain any spaces, tabs or quotes: %1." +msgstr "टैग नाम में कोई खाली जगह नहीं होनी चाहिए: %1." -#: management/kmconfigfilter.cpp:41 -msgid "Printer Filtering Settings" -msgstr "प्रिंटर फ़िल्टरिंग विन्यास" +#: cups/kmpropbanners.cpp:50 +msgid "Banner Settings" +msgstr "ध्वज विन्यास" -#: management/kmconfigfilter.cpp:44 -msgid "Printer Filter" -msgstr "प्रिंटर फ़िल्टर" +#: cups/kmconfigcups.cpp:32 +msgid "CUPS Server" +msgstr "कप्स सर्वर" -#: management/kmconfigfilter.cpp:56 -msgid "" -"The printer filtering allows you to view only a specific set of printers " -"instead of all of them. This may be useful when there are a lot of printers " -"available but you only use a few ones. Select the printers you want to see from " -"the list on the left or enter a Location filter (ex: Group_1*). Both are " -"cumulative and ignored if empty." -msgstr "" +#: cups/kmconfigcups.cpp:33 +msgid "CUPS Server Settings" +msgstr "कप्स सर्वर विन्यास" -#: management/kmconfigfilter.cpp:62 -msgid "Location filter:" -msgstr "स्थान फ़िल्टरः" +#: tools/escputil/escpwidget.cpp:45 +msgid "EPSON InkJet Printer Utilities" +msgstr "एप्सन इंकजेट प्रिंटर यूटिलिटीज़" -#: management/kmconfigfonts.cpp:43 -msgid "Font Settings" -msgstr "फ़ॉन्ट विन्यास" +#: tools/escputil/escpwidget.cpp:91 +msgid "&Use direct connection (might need root permissions)" +msgstr "प्रत्यक्ष कनेक्शन इस्तेमाल करें (रूट अनुमतियों की आवश्यकता होगी) (&U)" -#: management/kmconfigfonts.cpp:46 -msgid "Fonts Embedding" -msgstr "फ़ॉन्ट्स एम्बेडिंग" +#: tools/escputil/escpwidget.cpp:103 +msgid "Clea&n print head" +msgstr "प्रिंटर सिरा साफ करें (&n)" -#: management/kmconfigfonts.cpp:47 -msgid "Fonts Path" -msgstr "फ़ॉन्ट्स पथ" +#: tools/escputil/escpwidget.cpp:104 +msgid "&Print a nozzle test pattern" +msgstr "एक नोज़ल जाँच नमूना छापें (&P)" -#: management/kmconfigfonts.cpp:49 -msgid "&Embed fonts in PostScript data when printing" -msgstr "छपाई के समय पोस्ट-स्क्रिप्ट में फ़ॉन्ट्स एम्बेड करें (&E)" +#: tools/escputil/escpwidget.cpp:105 +msgid "&Align print head" +msgstr "प्रिंटर सिरा सीध मिलाएँ (&A)" -#: management/kmconfigfonts.cpp:57 -msgid "&Up" -msgstr "ऊपर (&U)" +#: tools/escputil/escpwidget.cpp:106 +msgid "&Ink level" +msgstr "स्याही स्तर (&I)" -#: management/kmconfigfonts.cpp:58 -msgid "&Down" -msgstr "नीचे (&D)" +#: tools/escputil/escpwidget.cpp:107 +msgid "P&rinter identification" +msgstr "प्रिंटर पहचान (&r)" -#: management/kmconfigfonts.cpp:59 -msgid "&Add" -msgstr "जोड़ें (&A)" +#: tools/escputil/escpwidget.cpp:153 +msgid "Internal error: no device set." +msgstr "आंतरिक त्रुटिः कोई उपकरण नियत नहीं है." -#: management/kmconfigfonts.cpp:61 -msgid "Additional director&y:" -msgstr "अतिरिक्त डिरेक्ट्री (&y)" +#: tools/escputil/escpwidget.cpp:164 +#, c-format +msgid "Unsupported connection type: %1" +msgstr "असमर्थित कनेक्शन क़िस्मः %1" -#: management/kmconfigfonts.cpp:85 +#: tools/escputil/escpwidget.cpp:171 msgid "" -"These options will automatically put fonts in the PostScript file which are not " -"present on the printer. Font embedding usually produces better print results " -"(closer to what you see on the screen), but larger print data as well." +"An escputil process is still running. You must wait until its completion before " +"continuing." msgstr "" +"एक escputil प्रक्रिया अभी भी चल रहा है. आपको जारी रखने से पूर्व इसके पूर्ण होने " +"तक इंतजार करना होगा." -#: management/kmconfigfonts.cpp:89 +#: tools/escputil/escpwidget.cpp:179 msgid "" -"When using font embedding you can select additional directories where TDE " -"should search for embeddable font files. By default, the X server font path is " -"used, so adding those directories is not needed. The default search path should " -"be sufficient in most cases." +"The executable escputil cannot be found in your PATH environment variable. Make " +"sure gimp-print is installed and that escputil is in your PATH." msgstr "" -#: management/kmspecialprinterdlg.cpp:46 -msgid "Add Special Printer" -msgstr "जोड़ें विशेष प्रिंटर" +#: tools/escputil/escpwidget.cpp:204 +msgid "Internal error: unable to start escputil process." +msgstr "आंतरिक त्रुटि: escputil प्रक्रिया प्रारंभ करने में असफल" -#: management/kmspecialprinterdlg.cpp:58 -msgid "&Location:" -msgstr "स्थानः (&L)" +#: tools/escputil/escpwidget.cpp:214 +msgid "Operation terminated with errors." +msgstr "प्रक्रिया त्रुटियों के साथ पूर्ण." -#: management/kmspecialprinterdlg.cpp:66 -msgid "Command &Settings" -msgstr "कमांड विन्यास (&S)" +#: kprintprocess.cpp:75 +msgid "File transfer failed." +msgstr "फ़ाइल स्थांतरण असफल." -#: management/kmspecialprinterdlg.cpp:69 -msgid "Outp&ut File" -msgstr "आउटपुट फ़ाइल (&u)" +#: kprintprocess.cpp:81 +msgid "Abnormal process termination (%1)." +msgstr "असामान्य प्रक्रिया बन्द (%1)." -#: management/kmspecialprinterdlg.cpp:71 -msgid "&Enable output file" -msgstr "आउटपुट फ़ाइल सक्षम करें (&E)" +#: kprintprocess.cpp:83 +msgid "%1: execution failed with message:%2
" +msgstr "%1: संदेश के साथ कार्य असफल:%2
" -#: management/kmspecialprinterdlg.cpp:88 -msgid "Filename e&xtension:" -msgstr "फ़ाइल नाम एक्सटेंशनः (&x)" +#: ppdloader.cpp:173 +msgid "(line %1): " +msgstr "(पंक्ति %1): " -#: management/kmspecialprinterdlg.cpp:105 +#: lpd/kmlpdmanager.cpp:87 +msgid "Local printer queue (%1)" +msgstr "स्थानीय प्रिंटर क़तार (%1)" + +#: lpd/kmlpdmanager.cpp:87 msgid "" -"The command will use an output file. If checked, make sure the command " -"contains an output tag.
" -msgstr "" -"कमांड आउटपुट फ़ाइल उपयोग करेगा. यदि चुना जाता है, सुनिश्चित हों कि कमांड मे " -"आउटपुट टैग समाविष्ट हो.
" +"_: Unknown type of local printer queue\n" +"Unknown" +msgstr "अज्ञात" -#: management/kmspecialprinterdlg.cpp:108 -#, c-format +#: lpd/kmlpdmanager.cpp:88 +msgid "The command to execute when printing on this special printer. Either enter " -"the command to execute directly, or associate/create a command object with/for " -"this special printer. The command object is the preferred method as it provides " -"support for advanced settings like mime type checking, configurable options and " -"requirement list (the plain command is only provided for backward " -"compatibility). When using a plain command, the following tags are " -"recognized:
" -"The default mimetype for the output file (e.g. application/postscript).
" +"Unable to set correct permissions on spool directory %1 for printer %2." msgstr "" -"आउटपुट फ़ाइल के लिए डिफ़ॉल्ट माइमक़िस्म (e.g. अनुप्रयोग/पोस्टस्क्रिप्ट).
" +"स्पूल डिरेक्ट्री %1 में प्रिंटर %2 के लिए उचित अनुमति नियत करने में " +"अक्षम." -#: management/kmspecialprinterdlg.cpp:121 -msgid "The default extension for the output file (e.g. ps, pdf, ps.gz).
" -msgstr "आउटपुट फ़ाइल के डिफ़ॉल्ट एक्सटेंशन (जैसे- ps, pdf, ps.gz).
" +#: lpd/kmlpdmanager.cpp:237 +msgid "Permission denied: you must be root." +msgstr "अनुमति अस्वीकृतः आपको रूट होना चाहिए." -#: management/kmspecialprinterdlg.cpp:170 -msgid "You must provide a non-empty name." -msgstr "आपको एक नॉन-एम्प्टी नाम देना होगा." +#: lpd/kmlpdmanager.cpp:244 +msgid "Unable to execute command \"%1\"." +msgstr "कमांड \"%1\" चलाने में अक्षम." -#: management/kmspecialprinterdlg.cpp:178 -#, c-format -msgid "Invalid settings. %1." -msgstr "अवैध विन्यास. %1." +#: lpd/kmlpdmanager.cpp:317 +msgid "Unable to write printcap file." +msgstr "प्रिंटकेप फ़ाइल लिखने में अक्षम." -#: management/kmspecialprinterdlg.cpp:197 -#, c-format -msgid "Configuring %1" -msgstr " %1 कॉन्फ़िगर करने में" +#: lpd/kmlpdmanager.cpp:372 +msgid "Couldn't find driver %1 in printtool database." +msgstr "ड्राइवर %1 प्रिंटटूल डाटाबेस में नहीं पाया जा सका." -#: management/smbview.cpp:44 -msgid "Comment" -msgstr "टिप्पणी" +#: lpd/kmlpdmanager.cpp:411 +msgid "Couldn't find printer %1 in printcap file." +msgstr "प्रिंटर %1 प्रिंटकेप फ़ाइल में नहीं पाया जा सका." -#: management/kmwend.cpp:33 -msgid "Confirmation" -msgstr "पुष्टिकरण" +#: lpd/kmlpdmanager.cpp:440 +msgid "No driver found (raw printer)" +msgstr "कोई ड्राइवर नहीं मिला (रॉ प्रिंटर)" -#: management/kmwend.cpp:50 management/kmwend.cpp:106 -#: management/kmwend.cpp:109 tdefilelist.cpp:102 -msgid "Type" -msgstr "क़िस्म" +#: lpd/kmlpdmanager.cpp:442 +msgid "Printer type not recognized." +msgstr "प्रिंटर क़िस्म पहचान नहीं सका." -#: management/kmwend.cpp:52 -msgid "Location" -msgstr "स्थान" +#: lpd/kmlpdmanager.cpp:452 +msgid "" +"The driver device %1 is not compiled in your GhostScript distribution. " +"Check your installation or use another driver." +msgstr "" +"ड्राइवर उपकरण %1 आपके घोस्ट-स्क्रिप्ट वितरण में कम्पाइल नहीं है. अपना " +"संस्थापन जाँचें या अन्य ड्राइवर जाँचें." -#: management/kmwend.cpp:69 -msgid "Backend" -msgstr "बैकएण्ड" +#: lpd/kmlpdmanager.cpp:560 +msgid "Unable to write driver associated files in spool directory." +msgstr "स्पूल डिरेक्ट्री में ड्राइवर सम्बद्ध फ़ाइल लिखने में अक्षम." -#: management/kmwend.cpp:74 -msgid "Device" -msgstr "उपकरण" +#: lpd/kmlpduimanager.cpp:44 +msgid "Local printer (parallel, serial, USB)" +msgstr "स्थानीय प्रिंटर (पैरेलल, सीरियल, यूएसबी)" -#: management/kmwend.cpp:77 -msgid "Printer IP" -msgstr "प्रिंटर आईपी" +#: lpd/kmlpduimanager.cpp:46 +msgid "SMB shared printer (Windows)" +msgstr "एसएमबी साझेदारी प्रिंटर (विंडोज़)" -#: management/kmwend.cpp:78 management/kmwend.cpp:89 -msgid "Port" -msgstr "पोर्ट" +#: lpd/kmlpduimanager.cpp:47 +msgid "Network printer (TCP)" +msgstr "नेटवर्क प्रिंटर (टीसीपी)" -#: management/kmwend.cpp:81 management/kmwend.cpp:88 -msgid "Host" -msgstr "होस्ट" +#: lpd/kmlpduimanager.cpp:48 +msgid "File printer (print to file)" +msgstr "फ़ाइल प्रिंटर (फ़ाइल में प्रिंट)" -#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48 -msgid "Queue" -msgstr "क़तार में लगाएँ" +#: lpd/lpdtools.cpp:31 +msgid "A4" +msgstr "ए4" -#: management/kmwend.cpp:91 -msgid "Account" -msgstr "खाता" +#: lpd/lpdtools.cpp:32 +msgid "A3" +msgstr "ए3" -#: management/kmwend.cpp:96 -msgid "URI" -msgstr "यूआरआई" +#: lpd/lpdtools.cpp:33 +msgid "B4" +msgstr "बी4" -#: management/kmwend.cpp:109 -msgid "DB driver" -msgstr "डीबी ड्राइवर" +#: lpd/lpdtools.cpp:34 +msgid "B5" +msgstr "बी5" -#: management/kmwend.cpp:109 -msgid "External driver" -msgstr "बाहरी ड्राइवर" +#: lpd/lpdtools.cpp:233 +msgid "GhostScript settings" +msgstr "घोस्ट-स्क्रिप्ट विन्यास" -#: management/kmwend.cpp:110 -msgid "Manufacturer" -msgstr "उत्पादक" +#: lpd/lpdtools.cpp:254 +msgid "Resolution" +msgstr "रिसॉल्यूशन" -#: management/kmwend.cpp:111 -msgid "Model" -msgstr "मॉडल" +#: lpd/lpdtools.cpp:277 +msgid "Color depth" +msgstr "रंग गहराई" -#: management/kmwdriver.cpp:33 -msgid "Printer Model Selection" -msgstr "प्रिंटर मॉडल चयन" +#: lpd/lpdtools.cpp:301 +msgid "Additional GS options" +msgstr "अतिरिक्त जीएस विकल्प" -#: management/kmwdriver.cpp:113 -msgid "Internal error: unable to locate the driver." -msgstr "आंतरिक त्रुटि: ड्राइवर का पता करने में अक्षम." +#: lpd/lpdtools.cpp:313 +msgid "Page size" +msgstr "पृष्ठ आकार" -#: management/kmpropgeneral.cpp:37 -msgid "Printer name:" -msgstr "प्रिंटर नामः" +#: lpd/lpdtools.cpp:329 +msgid "Pages per sheet" +msgstr "पृष्ठ प्रति शीट" + +#: lpd/lpdtools.cpp:345 +msgid "Left/right margin (1/72 in)" +msgstr "बायाँ/दायाँ हाशिया (1/72 इंच)" -#: management/kmwsmb.cpp:35 -msgid "SMB Printer Settings" -msgstr "एसएमबी प्रिंटर विन्यास" +#: lpd/lpdtools.cpp:350 +msgid "Top/bottom margin (1/72 in)" +msgstr "ऊपरी/निचला हाशिया (1/72 इंच)" -#: management/kmwsmb.cpp:41 -msgid "Scan" -msgstr "स्कैन" +#: lpd/lpdtools.cpp:356 +msgid "Text options" +msgstr "पाठ विकल्प" -#: management/kmwsmb.cpp:42 -msgid "Abort" -msgstr "छोड़ें" +#: lpd/lpdtools.cpp:362 +msgid "Send EOF after job to eject page" +msgstr "पृष्ठ को बाहर निकालने के लिए कार्य के बाद ईओएफ भेजें" -#: management/kmwsmb.cpp:44 -msgid "Workgroup:" -msgstr "वर्कग्रुपः" +#: lpd/lpdtools.cpp:370 +msgid "Fix stair-stepping text" +msgstr "निश्चित स्टेयर-स्टेपिंग पाठ" -#: management/kmwsmb.cpp:45 -msgid "Server:" -msgstr "सर्वरः" +#: lpd/lpdtools.cpp:382 +msgid "Fast text printing (non-PS printers only)" +msgstr "तीव्र पाठ छपाई (सिर्फ नॉन-पीएस प्रिंटर)" -#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45 -msgid "Empty printer name." -msgstr "खाली प्रिंटर नाम" +#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138 +msgid "Printer Configuration" +msgstr "प्रिंटर कॉन्फ़िगरेशन" -#: management/kmwsmb.cpp:99 -#, c-format -msgid "Login: %1" -msgstr "लॉगइनः %1" +#: kprinterpropertydialog.cpp:138 +msgid "No configurable options for that printer." +msgstr "उस प्रिंटर के लिए कोई कॉन्फ़िगरेबल विकल्प नहीं है." -#: management/kmwsmb.cpp:99 -msgid "If you enable this option, you can print posters of different sizes The " +"printout will happen in the form 'tiles' printed on smaller paper " +"sizes, which you can stitch together later. If you enable this option " +"here, the 'Poster Printing' filter will be auto-loaded in the " +"'Filters' tab of this dialog.
" +"This tab is only visible if the external 'poster' " +"utility is discovered by TDEPrint on your system. ['poster' " +"is a commandline utility that enables you to convert PostScript files into " +"tiled printouts which allow for oversized appearance of the stitched-together " +"tiles.]
" +"Note: The standard version of 'poster' will not work. Your system " +"must use a patched version of 'poster'. Ask your operating system vendor to " +"provide a patched version of 'poster' if he does not already.
This GUI element is not only for viewing " +"your selections: it also lets you interactively select the tile(s) you want to " +"print.
" +"Hints " +"
Note 2: By default no tile is selected. Before you can print (a part " +" of) your poster, you must select at least one tile.
Select the poster size you want from the dropdown list.
" +"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " +"as 16 sheets of A4, or '84cm x 118.2cm'.] " +"Notice, how the little preview window below changes with your change " +"of poster size. It indicates to you how many tiles need to be printed to make " +"the poster, given the selected paper size.
" +"Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"
Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.
This field indicates the paper size the poster tiles will be printed on. To " +"select a different paper size for your poster tiles, go to the 'General' tab " +"of this dialog and select one from the dropdown list.
" +"Available sizes are most standard paper sizes supported by your printer. Your " +"printer's supported paper sizes are read from the printer driver info (as laid " +"down in the 'PPD', the printer description file). " +"Be aware that the 'Paper Size' selected may not be supported by 'poster' " +"(example: 'HalfLetter') while it may well be supported by your printer. " +"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " +"or 'Letter'. " +"Notice, how the little preview window below changes with your change " +"of paper size. It indicates how many tiles need to be printed to make up the " +"poster, given the selected paper and poster size.
" +"Hint: The little preview window below is not just a passive icon. You " +"can click on its individual tiles to select them for printing. To select " +"multiple tiles to be printed at once, you need to 'shift-click' " +"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " +"and click with the mouse while [SHIFT]-key is held.) The order of your " +"clicking is significant to the order of printing the different tiles. The order " +"of your selection (and for the printed tiles) is indicated by the contents of " +"the text field labelled as 'Tile pages (to be printed):'" +"
Note: By default no tile is selected. Before you can print (a part " +"of) your poster, you must select at least one tile.
Slider and spinbox let you determine a 'cut margin' " +"which will be printed onto each tile of your poster to help you cut the pieces " +"as needed.
" +"Notice, how the little preview window above changes with your change " +"of cut margins. It indicates to you how much space the cut margins will take " +"away from each tile. " +"
Be aware, that your cut margins need to be equal to or greater than " +"the margins your printer uses. The printer's capabilities are described in the " +"'ImageableArea' keywords of its driver PPD file.
This field displays and sets the individual tiles to be printed, as well as " +"the order for their printout.
You can file the field with 2 different " +"methods: " +"When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " +"one.
" +"Examples:
" +"\"2,3,7,9,3\" " +"
\"1-3,6,8-11\"
\"General\"
" -"This dialog page contains general print job settings. General " -"settings are applicable to most printers, most jobs and most job file types. " -"
To get more specific help, enable the \"WhatsThis\" cursor and click on any " -"of the text labels or GUI elements of this dialog.
Page size: Select paper size to be printed on from the drop-down " -"menu.
" -"The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o PageSize=... # examples: \"A4\" or \"Letter\"" -"
Paper type: Select paper type to be printed on from the drop-down " -"menu.
" -"The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o MediaType=... # example: \"Transparency\"
Paper source: Select paper source tray for the paper to be printed on " -"from the drop-down menu. " -"
The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
" -"Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" " -"
Image Orientation: Orientation of the printed page image on your " -"paper is controlled by the radio buttons. By default, the orientation is " -"Portrait " -"
You can select 4 alternatives: " -"
Additional hint for power users: This TDEPrint GUI element " -"matches with the CUPS commandline job option parameter: " -"
-o orientation-requested=... # examples: \"landscape\" or " -"\"reverse-portrait\"
Duplex Printing: These controls may be grayed out if your printer " -"does not support duplex printing (i.e. printing on both sides of the " -"sheet). These controls are active if your printer supports duplex printing. " -"
You can choose from 3 alternatives:
" -"Top Margin
. " +"This spinbox/text edit field lets you control the top margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror..
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " +"Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" " -"
-o page-top=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:218 +#: marginwidget.cpp:57 msgid "" "
Banner Page(s): Select banner(s) to print one or two special sheets " -"of paper just before or after your main job.
" -"Banners may contain some pieces of job information, such as user name, time " -"of printing, job title and more.
" -"Banner pages are useful to separate different jobs more easily, especially " -"in a multi-user environment.
" -"Hint: You can design your own banner pages. To make use of " -"them, just put the banner file into the standard CUPS banners " -"directory (This is usually \"/usr/share/cups/banner/\" " -"Your custom banner(s) must have one of the supported printable formats. " -"Supported formats are ASCII text, PostScript, PDF and nearly any image format " -"such as PNG, JPEG or GIF. Your added banner pages will appear in the drop down " -"menu after a restart of CUPS.
" -"CUPS comes with a selection of banner pages.
" +"Bottom Margin
. " +"This spinbox/text edit field lets you control the bottom margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o job-sheets=... # examples: \"standard\" or \"topsecret\" " -"
-o page-bottom=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:240 +#: marginwidget.cpp:76 msgid "" "
Pages per Sheet: You can choose to print more than one page onto " -"each sheet of paper. This is sometimes useful to save paper.
" -"Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"
Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. Be aware, that some printers can " -"by themselves print multiple pages per sheet. In this case you find the option " -"in the printer driver settings. Be careful: if you enable multiple pages per " -"sheet in both places, your printout will not look as you intended.
" +"Left Margin
. " +"This spinbox/text edit field lets you control the left margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " "Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " -"
-o number-up=... # examples: \"2\" or \"4\"
-o page-left=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch." msgstr "" -#: kpgeneralpage.cpp:264 kpqtpage.cpp:118 -msgid "Page s&ize:" -msgstr "पृष्ठ आकारः (&i)" - -#: kpgeneralpage.cpp:268 -msgid "Paper t&ype:" -msgstr "कागज़ क़िस्मः (&y)" - -#: kpgeneralpage.cpp:272 -msgid "Paper so&urce:" -msgstr "कागज स्रोतः (&u)" - -#: kpgeneralpage.cpp:292 -msgid "Duplex Printing" -msgstr "डुप्ले प्रिंटिंग" - -#: kpgeneralpage.cpp:295 kpqtpage.cpp:143 -msgid "Pages per Sheet" -msgstr "पृष्ठ प्रति शीट" - -#: kpgeneralpage.cpp:301 kpqtpage.cpp:125 -msgid "&Portrait" -msgstr "पोर्टेट (&P)" - -#: kpgeneralpage.cpp:302 kpqtpage.cpp:128 -msgid "&Landscape" -msgstr "लैंडस्केप (&L)" - -#: kpgeneralpage.cpp:303 -msgid "&Reverse landscape" -msgstr "विपरीत लैंडस्केप (&R)" - -#: kpgeneralpage.cpp:304 -msgid "R&everse portrait" -msgstr "विपरीत पोर्टेट (&e)" - -#: kpgeneralpage.cpp:309 -msgid "" -"_: duplex orientation\n" -"&None" -msgstr "कुछ नहीं (&N)" - -#: kpgeneralpage.cpp:310 -msgid "" -"_: duplex orientation\n" -"Lon&g side" -msgstr "लंबी तरफ (&g)" - -#: kpgeneralpage.cpp:311 -msgid "" -"_: duplex orientation\n" -"S&hort side" -msgstr "छोटी तरफ (&h)" - -#: kpgeneralpage.cpp:323 -msgid "S&tart:" -msgstr "प्रारंभः (&t)" - -#: kpgeneralpage.cpp:324 -msgid "En&d:" -msgstr "अंतः (&d)" - -#: kpfileselectpage.cpp:33 -msgid "&Files" -msgstr "फ़ाइलें (&F)" - -#: kpqtpage.cpp:70 -msgid "" -"
Right Margin
. " +"This spinbox/text edit field lets you control the right margin of your " +"printout if the printing application does not define its margins internally. " +"
" +"The setting works for instance for ASCII text file printing, or for printing " +"from KMail and and Konqueror.
" +"Note:
This margin setting is not intended for KOffice or " +"OpenOffice.org printing, because these applications (or rather their users) " +"are expected to do it by themselves. It also does not work for PostScript or " +"PDF file, which in most cases have their margins hardcoded internally. " +"Additional hint for power users: This TDEPrint GUI element " +"matches with the CUPS commandline job option parameter: " +"
-o page-right=... # use values from \"0\" or higher. \"72\" is " +"equal to 1 inch.
The exact list of choices depends on the printer driver (\"PPD\") you have " -"installed.
Change Measurement Unit
. " +"You can change the units of measurement for the page margins here. Select " +"from Millimeter, Centimeter, Inch or Pixels (1 pixel == 1/72 inch).
Note 1: the page images get scaled down accordingly to print 2 or 4 " -"pages per sheet. The page image does not get scaled if you print 1 page per " -"sheet (the default setting.). " -"
Note 2: If you select multiple pages per sheet here, the scaling and " -"re-arranging is done by your printing system. " -"
Note 3, regarding \"Other\": You cannot really select Other " -"as the number of pages to print on one sheet.\"Other\" is checkmarked here for " -"information purposes only. " -"
To select 8, 9, 16 or other numbers of pages per sheet: "
+" Custom Margins Checkbox Enable this checkbox if you want to modify the margins of your printouts "
+" You can change margin settings in 4 ways: "
" "
-"
You can select 2 alternatives: " -"
\"Drag-your-Margins\"
. " +"Use your mouse to drag and set each margin on this little preview window. " +"
If you enable this option, you can print posters of different sizes The " -"printout will happen in the form 'tiles' printed on smaller paper " -"sizes, which you can stitch together later. If you enable this option " -"here, the 'Poster Printing' filter will be auto-loaded in the " -"'Filters' tab of this dialog.
" -"This tab is only visible if the external 'poster' " -"utility is discovered by TDEPrint on your system. ['poster' " -"is a commandline utility that enables you to convert PostScript files into " -"tiled printouts which allow for oversized appearance of the stitched-together " -"tiles.]
" -"Note: The standard version of 'poster' will not work. Your system " -"must use a patched version of 'poster'. Ask your operating system vendor to " -"provide a patched version of 'poster' if he does not already.
This GUI element is not only for viewing " -"your selections: it also lets you interactively select the tile(s) you want to " -"print.
" -"Hints " -"
Note 2: By default no tile is selected. Before you can print (a part " -" of) your poster, you must select at least one tile.
Select the poster size you want from the dropdown list.
" -"Available sizes are all standard paper sizes up to 'A0'. [A0 is the same size " -"as 16 sheets of A4, or '84cm x 118.2cm'.] " -"Notice, how the little preview window below changes with your change " -"of poster size. It indicates to you how many tiles need to be printed to make " -"the poster, given the selected paper size.
" -"Hint: The little preview window below is not just a passive icon. You " -"can click on its individual tiles to select them for printing. To select " -"multiple tiles to be printed at once, you need to 'shift-click' " -"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " -"and click with the mouse while [SHIFT]-key is held.) The order of your " -"clicking is significant to the order of printing the different tiles. The order " -"of your selection (and for the printed tiles) is indicated by the contents of " -"the text field labelled as 'Tile pages (to be printed):'" -"
Note: By default no tile is selected. Before you can print (a part " -"of) your poster, you must select at least one tile.
This field indicates the paper size the poster tiles will be printed on. To " -"select a different paper size for your poster tiles, go to the 'General' tab " -"of this dialog and select one from the dropdown list.
" -"Available sizes are most standard paper sizes supported by your printer. Your " -"printer's supported paper sizes are read from the printer driver info (as laid " -"down in the 'PPD', the printer description file). " -"Be aware that the 'Paper Size' selected may not be supported by 'poster' " -"(example: 'HalfLetter') while it may well be supported by your printer. " -"If you hit that obstacle, simply use another, supported Paper Size, like 'A4' " -"or 'Letter'. " -"Notice, how the little preview window below changes with your change " -"of paper size. It indicates how many tiles need to be printed to make up the " -"poster, given the selected paper and poster size.
" -"Hint: The little preview window below is not just a passive icon. You " -"can click on its individual tiles to select them for printing. To select " -"multiple tiles to be printed at once, you need to 'shift-click' " -"on the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard " -"and click with the mouse while [SHIFT]-key is held.) The order of your " -"clicking is significant to the order of printing the different tiles. The order " -"of your selection (and for the printed tiles) is indicated by the contents of " -"the text field labelled as 'Tile pages (to be printed):'" -"
Note: By default no tile is selected. Before you can print (a part " -"of) your poster, you must select at least one tile.
Slider and spinbox let you determine a 'cut margin' " -"which will be printed onto each tile of your poster to help you cut the pieces " -"as needed.
" -"Notice, how the little preview window above changes with your change " -"of cut margins. It indicates to you how much space the cut margins will take " -"away from each tile. " -"
Be aware, that your cut margins need to be equal to or greater than " -"the margins your printer uses. The printer's capabilities are described in the " -"'ImageableArea' keywords of its driver PPD file.
This field displays and sets the individual tiles to be printed, as well as " -"the order for their printout.
You can file the field with 2 different " -"methods: " -"When editing the field, you can use a '3-7' syntax instead of a '3,4,5,6,7' " -"one.
" -"Examples:
" -"\"2,3,7,9,3\" " -"
\"1-3,6,8-11\"
The upper pane of this dialog page contains all printjob options as laid " -"down in the printer's description file (PostScript Printer Description == " -"'PPD')
" -"Click on any item in the list and watch the lower pane of this dialog page " -"display the available values.
" -"Set the values as needed. Then use one of the pushbuttons below to " -"proceed:
" -"Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.
The lower pane of this dialog page contains all possible values of the " -"printoption highlighted above, as laid down in the printer's description file " -"(PostScript Printer Description == 'PPD')
" -"Select the value you want and proceed.
" -"Then use one of the pushbuttons below to leave this dialog:
" -"Note. The number of available job options depends strongly on the " -"actual driver used for your print queue. 'Raw' " -"queues do not have a driver or a PPD. For raw queues this tab page is not " -"loaded by TDEPrint, and thus is not present in the kprinter dialog.
This combo box shows (and lets you select) a print subsystem to be used by " -"TDEPrint. (This print subsystem must, of course, be installed inside your " -"Operating System.) TDEPrint usually auto-detects the correct print subsystem by " -"itself upon first startup. Most Linux distributions have \"CUPS\", the " -"Common UNIX Printing System.
This line shows which CUPS server your PC is currently connected to for " -"printing and retrieving printer info. To switch to a different CUPS server, " -"click \"System Options\", then select \"Cups server\" and fill in the required " -"info.
This button calls a little dialog to let you select a filter here.
" -"Note 1: You can chain different filters as long as you make sure " -"that the output of one fits as input of the next. (TDEPrint checks your " -"filtering chain and will warn you if you fail to do so.
" -"Note 2: The filters you define here are applied to your jobfile " -"before it is handed downstream to your spooler and print subsystem " -"(e.g. CUPS, LPRng, LPD).
This button removes the highlighted filter from the list of filters.
The upper pane of this dialog page contains all printjob options as laid " +"down in the printer's description file (PostScript Printer Description == " +"'PPD')
" +"Click on any item in the list and watch the lower pane of this dialog page " +"display the available values.
" +"Set the values as needed. Then use one of the pushbuttons below to " +"proceed:
" +"Note. The number of available job options depends strongly on the " +"actual driver used for your print queue. 'Raw' " +"queues do not have a driver or a PPD. For raw queues this tab page is not " +"loaded by TDEPrint, and thus is not present in the kprinter dialog.
This button moves the highlighted filter up in the list of filters, towards " -"the front of the filtering chain.
The lower pane of this dialog page contains all possible values of the " +"printoption highlighted above, as laid down in the printer's description file " +"(PostScript Printer Description == 'PPD')
" +"Select the value you want and proceed.
" +"Then use one of the pushbuttons below to leave this dialog:
" +"Note. The number of available job options depends strongly on the " +"actual driver used for your print queue. 'Raw' " +"queues do not have a driver or a PPD. For raw queues this tab page is not " +"loaded by TDEPrint, and thus is not present in the kprinter dialog.
यह बटन उभारे गए फ़ाइल को मुद्रित की जाने वाली फ़ाइलों की सूची के सबसे ऊपर ले " -"जाता है.
" -"नतीजतन, यह फ़ाइलों के प्रिंटआउट के अनुक्रम को बदलता है
This button moves the highlighted filter down in the list of filters, " -"towards the end of the filtering chain..
यह बटन उभारे गए फ़ाइल को मुद्रित की जाने वाली फ़ाइलों की सूची के सबसे नीचे " -"ले जाता है.
" -"नतीजतन, यह फ़ाइलों के प्रिंटआउट के अनुक्रम को बदलता है
This button lets you configure the currently highlighted filter. It opens a " -"separate dialog.
%2
%2
This field shows some general info about the selected filter. Amongst them " -"are: " -"
This field shows which filters are currently selected to act as " -"'pre-filters' for TDEPrint. Pre-filters are processing the print files " -"before they are send downstream to your real print subsystem.
" -"The list shown in this field may be empty (default).
" -"The pre-filters act on the printjob in the order they are listed (from top " -"to bottom). This is done by acting as a filtering chain " -"where the output of one filter acts as input to the next. By putting the " -"filters into the wrong order, you can make the filtering chain fail. For " -"example: if your file is ASCII text, and you want the output being processed " -"by the 'Multipage per Sheet' filter, the first filter must be one that " -"processes ASCII into PostScript.
" -"TDEPrint can utilize any external filtering program which you may " -"find useful through this interface.
" -"TDEPrint ships preconfigured with support for a selection of common filters. " -"These filters however need to be installed independently from TDEPrint. These " -"pre-filters work for all print subsystems supported by TDEPrint (such " -"as CUPS, LPRng and LPD), because they are not depending on these.
." -"Amongst the pre-configured filters shipping with TDEPrint are:
" -"Please click on the other elements of this dialog to learn more about the " -"TDEPrint pre-filters.
The filter chain is wrong. The output format of at least one filter is not " -"supported by its follower. See Filters tab for more information.
" -msgstr "" +#: tdeprintd.cpp:263 +msgid "Printing system" +msgstr "छपाई तंत्र" -#: kpfilterpage.cpp:408 -msgid "Input" -msgstr "इनपुट" +#: tdeprintd.cpp:266 +msgid "Authentication failed (user name=%1)" +msgstr "प्रमाणीकरण असफल (उपयोक्ता नाम=%1)" #~ msgid "%1 &Handbook" #~ msgstr "%1 हैंडबुक &H" -- cgit v1.2.1