From 0a3068399e3af480a253ac401793c0e6afadde3e Mon Sep 17 00:00:00 2001 From: Darrell Anderson Date: Fri, 23 Mar 2012 18:31:57 -0500 Subject: Fix KDE -> TDE branding. --- tde-i18n-hr/messages/tdelibs/tdeprint.po | 258 +++++++++++++++---------------- 1 file changed, 129 insertions(+), 129 deletions(-) (limited to 'tde-i18n-hr/messages/tdelibs/tdeprint.po') diff --git a/tde-i18n-hr/messages/tdelibs/tdeprint.po b/tde-i18n-hr/messages/tdelibs/tdeprint.po index bce82bbfa7a..29392e3bf2f 100644 --- a/tde-i18n-hr/messages/tdelibs/tdeprint.po +++ b/tde-i18n-hr/messages/tdelibs/tdeprint.po @@ -510,13 +510,13 @@ msgstr "" msgid "" " Printer Selection Menu: " "

Use this combo box to select the printer to which you want to print. " -"Initially (if you run KDEPrint for the first time), you may only find the " -"KDE special printers (which save jobs to disk [as PostScript- or " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

" "

Note: It may happen that you successfully connected to a remote CUPS " -"server and still do not get a printer list. If this happens: force KDEPrint to " +"server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " @@ -551,7 +551,7 @@ msgid "" "

To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " -"KDE Print Configuration dialog) and setup your selection..

" +"TDE Print Configuration dialog) and setup your selection..

" "

Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

" @@ -559,11 +559,11 @@ msgstr "" #: kprintdialog.cpp:154 msgid "" -"KDE Add Printer Wizard " -"

This button starts the KDE Add Printer Wizard.

" +"TDE Add Printer Wizard " +"

This button starts the TDE Add Printer Wizard.

" "

Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

" -"

Note: The KDE Add Printer Wizard does not " +"

Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

" msgstr "" @@ -591,21 +591,21 @@ msgid "" "

This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

" +"
  • Should TDEPrint use a local or a remote CUPS server?, " "and many more.... " msgstr "" #: kprintdialog.cpp:182 #, fuzzy msgid "" -" Help: This button takes you to the complete KDEPrint Manual" +" Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" -"Oajo gumb vas odvodi do cjelovitog KDEPrint uputstva." +"Oajo gumb vas odvodi do cjelovitog TDEPrint uputstva." #: kprintdialog.cpp:186 #, fuzzy @@ -619,12 +619,12 @@ msgstr "" #, fuzzy msgid "" " Print: This button sends the job to the printing process. If you " -"are sending non-PostScript files, you may be asked if you want KDE to convert " +"are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" "Ovaj gumb šalje posao na proces tiskanja. Ako šaljete ne-PostScript " -"datoteke, možda ćete biti upitani želite li da KDE pretvori datoteke u " +"datoteke, možda ćete biti upitani želite li da TDE pretvori datoteke u " "PostScript format, ili želite da to uradi vaš podsustav za tiskanje (kao što je " "CUPS)." @@ -643,7 +643,7 @@ msgstr "" msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " -"of the KDE Special Printers named \"Print to File (PostScript)\" or " +"of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr "" @@ -685,9 +685,9 @@ msgid "" "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

    Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside KDE applications. If you start " +"visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " -"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" " Kliknite u ovu kućicu ako želite vidjeti pregled ispisa. Pregled vam " @@ -832,7 +832,7 @@ msgid "" "secretaries who serve different bosses, etc.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-billing=...         # example: \"Marketing_Department\" or "
 "\"Joe_Doe\"

    " @@ -856,7 +856,7 @@ msgid "" "trays).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
 "

    " @@ -871,7 +871,7 @@ msgid "" "

    They contain any string you type into the line edit field.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-label=\"...\"      # example: \"Company Confidential\"
    " "

    " @@ -893,7 +893,7 @@ msgid "" "no other, higher prioritized one is present).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
    " "

    " @@ -1304,7 +1304,7 @@ msgid "" "

    The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o cpi=...          # example: \"8\" or \"12\"

    " msgstr "" @@ -1318,7 +1318,7 @@ msgid "" "

    The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o lpi=...         # example \"5\" or \"7\"

    " msgstr "" @@ -1332,7 +1332,7 @@ msgid "" "

    The default value is 1, meaning that only one column of text per page will " "be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o columns=...     # example: \"2\" or \"4\"

    " msgstr "" @@ -1348,11 +1348,11 @@ msgid "" "

    These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

    " "

    Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " +"formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

    . " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o cpi=...         # example: \"8\" or \"12\"  "
 "
         -o lpi=...         # example: \"5\" or \"7\"  "
@@ -1365,9 +1365,9 @@ msgid ""
 "
    Margins
      "
 "
    These settings control the margins of printouts on the paper. They are not "
 "valid for  jobs originating from applications which define their own page "
-"layout internally and  send PostScript to KDEPrint (such as KOffice or "
+"layout internally and  send PostScript to TDEPrint (such as KOffice or "
 "OpenOffice.org). 
      "
-"
    When printing from KDE applications, such as KMail and Konqueror, or "
+"
    When printing from TDE applications, such as KMail and Konqueror, or "
 "printing an ASCII text  file through kprinter, you can choose your preferred "
 "margin settings here. 
      "
 "
    Margins may be set individually for each edge of the paper. The combo box at "
@@ -1376,7 +1376,7 @@ msgid ""
 "
    You can even use the mouse to grab one margin and drag it to the intended "
 "position (see the  preview picture on the right side). 
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o page-top=...      # example: \"72\"  "
 "
         -o page-bottom=...   # example: \"24\"  "
@@ -1397,7 +1397,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  
     
      "
 msgstr ""
@@ -1411,7 +1411,7 @@ msgid ""
 "margins, though.) 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o prettyprint=false  
     
      "
 msgstr ""
@@ -1429,7 +1429,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  "
 "
         -o prettyprint=false  
     
      "
@@ -1494,7 +1494,7 @@ msgid ""
 "server via this editable list.  There are 3 purposes for this: "
 "
       "
 "
    • Use any current or future standard CUPS job option not supported by the  "
-"KDEPrint GUI. 
      •  "
+"TDEPrint GUI.  "
 "
    • Control any custom job option you may want to support in custom CUPS "
 "filters  and backends plugged into the CUPS filtering chain.
      •   "
 "
    • Send short messages to the operators of your production printers in your  "
@@ -1528,7 +1528,7 @@ msgid ""
 "
      Note: the fields must not include spaces, tabs or quotes. You may "
 "need to  double-click on a field to edit it. "
 "
      Warning: Do not use such standard CUPS option names which also can be "
-"used  through the KDEPrint GUI. Results may be  unpredictable if they conflict, "
+"used  through the TDEPrint GUI. Results may be  unpredictable if they conflict, "
 " or if they are sent multiple times. For all options supported by the GUI, "
 "please do use  the GUI. (Each GUI element's  'WhatsThis' names the related CUPS "
 "option name.) 
        "
@@ -1723,7 +1723,7 @@ msgid ""
 "colors defined in the HP-GL/2 reference manual from Hewlett Packard. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o blackplot=true  
        
        "
 msgstr ""
@@ -1743,7 +1743,7 @@ msgid ""
 "the HP-GL  to PostScript assumes the plot is ANSI E size. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
           -o fitplot=true   
       
        "
 msgstr ""
@@ -1760,7 +1760,7 @@ msgid ""
 "set inside  the plot file itself..
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
          -o penwidth=...   # example: \"2000\" or \"500\"  
       
        "
 msgstr ""
@@ -1768,11 +1768,11 @@ msgstr ""
 #: cups/kphpgl2page.cpp:85
 msgid ""
 "   HP-GL Print Options  "
-"
      All options on this page are only applicable if you use KDEPrint to send "
+"
      All options on this page are only applicable if you use TDEPrint to send "
 "HP-GL and  HP-GL/2 files to one of your printers. 
        "
 "
      HP-GL and HP-GL/2 are page description languages developed by "
 "Hewlett-Packard to drive  Pen Plotting devices. 
        "
-"
      KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"
      TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
 "it  on any installed printer. 
        "
 "
      Note 1: To print HP-GL files, start 'kprinter' and simply load the "
 "file into  the running kprinter.
       "
@@ -1781,7 +1781,7 @@ msgid ""
 "1.1.22).
        "
 "
        "
 "
        "
-"
      Additional hint for power users: These KDEPrint GUI elements "
+"
      Additional hint for power users: These TDEPrint GUI elements "
 "match with CUPS commandline job option parameters:  "
 "
           -o blackplot=...  # examples: \"true\" or \"false\"  "
 "
           -o fitplot=...    # examples: \"true\" or \"false\"  "
@@ -2009,7 +2009,7 @@ msgid ""
 "lighten the print. Values less than 100 will darken the print. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o brightness=...      # use range from \"0\" to \"200\"  
        
        "
 ""
@@ -2053,7 +2053,7 @@ msgid ""
 "Light-navy-blue       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o hue=...     # use range from \"-360\" to \"360\"  
       
        "
 msgstr ""
@@ -2071,7 +2071,7 @@ msgid ""
 "make the colors extremely intense. 
       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o saturation=...      # use range from \"0\" to \"200\"  
       
        "
 ""
@@ -2088,7 +2088,7 @@ msgid ""
 "preview. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o gamma=...      # use range from \"1\" to \"3000\"  
       
        "
 ""
@@ -2159,7 +2159,7 @@ msgid ""
 "printed.  Scaling in % of natural image size defaults to 100 %.  
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o natural-scaling=...     # range in  %  is 1....800  "
 "
         -o scaling=...             # range in  %  is 1....800  "
@@ -2207,7 +2207,7 @@ msgid ""
 "paper printout. Default  is 'center'. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o position=...       # examples: \"top-left\" or \"bottom\"  
     "
 "
      "
@@ -3043,9 +3043,9 @@ msgstr "&Koristi vanjski program za pregled:"
 
 #: management/kmconfigpreview.cpp:44
 msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
 msgstr ""
 
 #: management/kmwdrivertest.cpp:41
@@ -3111,8 +3111,8 @@ msgid ""
 msgstr ""
 
 #: management/kaddprinterwizard.cpp:10
-msgid "Configure KDE Print"
-msgstr "Podešavanje KDE ispisa"
+msgid "Configure TDE Print"
+msgstr "Podešavanje TDE ispisa"
 
 #: management/kaddprinterwizard.cpp:11
 msgid "Configure print server"
@@ -3147,8 +3147,8 @@ msgstr ""
 "%1 nije uspjelo."
 
 #: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
-msgstr "Molim pričekajte dok KDE izgradi bazu upravljačkih programa."
+msgid "Please wait while TDE rebuilds a driver database."
+msgstr "Molim pričekajte dok TDE izgradi bazu upravljačkih programa."
 
 #: management/kmdbcreator.cpp:114
 msgid "Driver Database"
@@ -3219,8 +3219,8 @@ msgid "Change..."
 msgstr "Promijeni..."
 
 #: management/kmconfigdialog.cpp:38
-msgid "KDE Print Configuration"
-msgstr "KDE postavke ispisa"
+msgid "TDE Print Configuration"
+msgstr "TDE postavke ispisa"
 
 #: management/kmwdriver.cpp:33
 msgid "Printer Model Selection"
@@ -3376,10 +3376,10 @@ msgstr " sek"
 
 #: management/kmconfiggeneral.cpp:53
 msgid ""
-"This time setting controls the refresh rate of various KDE Print "
+"This time setting controls the refresh rate of various TDE Print "
 "components like the print manager and the job viewer."
 msgstr ""
-"Ovim vremenom kontrolirate obnavljanje raznih KDEispis "
+"Ovim vremenom kontrolirate obnavljanje raznih TDEispis "
 "komponenti kao što su voditelj ispisa i pregled poslova."
 
 #: management/kmconfiggeneral.cpp:57
@@ -3522,13 +3522,13 @@ msgstr ""
 
 #: management/kmconfigfonts.cpp:89
 msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
 "should search for embeddable font files. By default, the X server font path is "
 "used, so adding those directories is not needed. The default search path should "
 "be sufficient in most cases."
 msgstr ""
 "Kada koristite ugrađivanje pisama, odna možete odabrati dodatne direktorije "
-"gdje će KDE tražiti datoteke pisma. Obično se koristi putanja X poslužitelja "
+"gdje će TDE tražiti datoteke pisma. Obično se koristi putanja X poslužitelja "
 "pisama, pa dodavanje drugih nije nužno. Uobičajena putanja za traženje će biti "
 "dovoljna u većini slučajeva."
 
@@ -3915,7 +3915,7 @@ msgid ""
 "
    "
 "
    We hope you'll enjoy this tool!
    "
 "
    "
-"The KDE printing team.
    "
+"The TDE printing team.
    "
 msgstr ""
 
 #: management/kmdriverdbwidget.cpp:51
@@ -4373,7 +4373,7 @@ msgid ""
 "  File Open button "
 "
    This button tries to open the highlighted file, so you can view or edit it "
 "before you send it to the printing system.
     "
-"
    If you open files, KDEPrint will use the application matching the MIME type "
+"
    If you open files, TDEPrint will use the application matching the MIME type "
 "of the file.
         "
 msgstr ""
 "Ovaj gumb pokušava otvoriti osvjetljenu datoteku, tako da  ju možete "
@@ -4384,7 +4384,7 @@ msgid ""
 "  File List view "
 "
    This list displays all the files you selected for printing. You can see the "
 "file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
 "the arrow buttons on the right.
     "
 "
    The files will be printed as a single job, in the same order as displayed in "
 "the list.
     "
@@ -4392,7 +4392,7 @@ msgid ""
 "locations. The files may be of multiple MIME types. The buttons on the right "
 "side let you add more files, remove already selected files from the list,  "
 "re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.
     "
+"files, TDEPrint will use the application matching the MIME type of the file.
     "
 "    "
 msgstr ""
 
@@ -4429,14 +4429,14 @@ msgstr "Podešavanja"
 msgid ""
 " Print Subsystem Selection "
 "
    This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
 "itself upon first startup. Most Linux distributions have \"CUPS\", the "
 "Common UNIX Printing System. "
 msgstr ""
 "Ova kombo kutija prikazuje (i omogućava vam odabir) podsustava za tiskanje "
-"koji će koristiti KDEPrint. (Ovaj podsustav za tiskanje mora, naravno, biti "
-"instaliran unutar vašeg operativnog sustava). KDEPrint gaobično uspijeva sam "
+"koji će koristiti TDEPrint. (Ovaj podsustav za tiskanje mora, naravno, biti "
+"instaliran unutar vašeg operativnog sustava). TDEPrint gaobično uspijeva sam "
 "otkriti. Većina distribucija linux-a ima „CUPS“, "
 "Common Unix Printing System."
 
@@ -4482,7 +4482,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
          "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
          "
 msgstr ""
 
 #: driverview.cpp:71
@@ -4507,7 +4507,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
      "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 
 #: kprinter.cpp:280
@@ -4563,8 +4563,8 @@ msgstr "Parelelni port br. %1"
 
 #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
 #, c-format
-msgid "Unable to load KDE print management library: %1"
-msgstr "Nije moguće učitati KDE biblioteku za upravljanje pisačima: %1"
+msgid "Unable to load TDE print management library: %1"
+msgstr "Nije moguće učitati TDE biblioteku za upravljanje pisačima: %1"
 
 #: kmmanager.cpp:491 kxmlcommand.cpp:669
 msgid "Unable to find wizard object in management library."
@@ -4590,12 +4590,12 @@ msgstr "Udaljeni red pisača na %1"
 
 #: kmspecialmanager.cpp:53
 msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
 "order to manage global pseudo printers."
 msgstr ""
-"Datoteka share/tdeprint/specials.desktop je nađena u vašem lokalnom KDE "
-"direktoriju. Vjerojatno potječe od prethodne inačice KDE-a i treba je maknuti "
+"Datoteka share/tdeprint/specials.desktop je nađena u vašem lokalnom TDE "
+"direktoriju. Vjerojatno potječe od prethodne inačice TDE-a i treba je maknuti "
 "da biste mogli namjestiti globalne pseudo pisače."
 
 #: kprinterimpl.cpp:156
@@ -4623,10 +4623,10 @@ msgstr "Nije moguće pokrenuti podređeni proces ispisa."
 
 #: kprinterimpl.cpp:281
 msgid ""
-"The KDE print server (tdeprintd) could not be contacted. Check that this "
+"The TDE print server (tdeprintd) could not be contacted. Check that this "
 "server is running."
 msgstr ""
-"Ne mogu stupiti u vezu s KDE poslužiteljem ispisa (tdeprintd"
+"Ne mogu stupiti u vezu s TDE poslužiteljem ispisa (tdeprintd"
 "). Provjerite je li pokrenut."
 
 #: kprinterimpl.cpp:283
@@ -4665,7 +4665,7 @@ msgstr ""
 msgid ""
 "The MIME type %1 is not supported as input of the filter chain (this may happen "
 "with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?
    "
+"file). Do you want TDE to convert the file to a supported format?
    "
 msgstr ""
 
 #: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -4713,16 +4713,16 @@ msgid ""
 "The file format  %1  is not directly supported by the current "
 "print system. You now have 3 options: "
 "
       "
-"
    •  KDE can attempt to convert this file automatically to a supported format. "
+"
    •  TDE can attempt to convert this file automatically to a supported format. "
 "(Select Convert) 
      • "
 "
    •  You can try to send the file to the printer without any conversion. "
 "(Select Keep) 
      • "
 "
    •  You can cancel the printjob. (Select Cancel) 
     "
-"Do you want KDE to attempt and convert this file to %2?    "
+"Do you want TDE to attempt and convert this file to %2?"
 msgstr ""
-"Oblik datoteke %1 nije direktno podržan od sadašnjeg sustava za ispis. KDE može "
+"Oblik datoteke %1 nije direktno podržan od sadašnjeg sustava za ispis. TDE može "
 "pokušati automatski pretvoriti ovu datoteku u podržani oblik. Ipak, možete "
-"poslati datoteku na pisač bez prethodne pretvorbe. Želite li da KDE proba "
+"poslati datoteku na pisač bez prethodne pretvorbe. Želite li da TDE proba "
 "pretvoriti ovu datoteku u %2?"
 
 #: kprinterimpl.cpp:518
@@ -4815,7 +4815,7 @@ msgid ""
 "installed.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o PageSize=...         # examples: \"A4\" or \"Letter\"  
     
      "
 ""
@@ -4830,7 +4830,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o MediaType=...        # example: \"Transparency\"  
     
      "
 msgstr ""
@@ -4844,7 +4844,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
 "
     
      "
@@ -4866,7 +4866,7 @@ msgid ""
 "down.
    • The icon changes according to your selection.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o orientation-requested=...       # examples: \"landscape\" or "
 "\"reverse-portrait\"

    " @@ -4892,7 +4892,7 @@ msgid "" "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled). " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
 "

    " @@ -4917,7 +4917,7 @@ msgid "" "

    CUPS comes with a selection of banner pages.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
 "

    " @@ -4938,7 +4938,7 @@ msgid "" "sheet in both places, your printout will not look as you intended.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o number-up=...        # examples: \"2\" or \"4\"

    " msgstr "" @@ -5048,11 +5048,11 @@ msgstr "%1: izvršavanje prekinuto s porukom:

    %2

    " #: tdeprintd.cpp:176 msgid "" -"Some of the files to print are not readable by the KDE print daemon. This may " +"Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" -"Neke od datoteka za ispis nisu čitljive KDE izvršitelju. Ovo se može dogoditi " +"Neke od datoteka za ispis nisu čitljive TDE izvršitelju. Ovo se može dogoditi " "ako pokušavate ispisati datoteke drugih korisnika. Za nastavak ispisa morate " "upisati root-ovu šifru (on im ovlasti pristupa)." @@ -5103,9 +5103,9 @@ msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" " -"if you want to print the page currently visible in your KDE application.

    " -"

    Note: this field is disabled if you print from non-KDE applications " -"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine " +"if you want to print the page currently visible in your TDE application.

    " +"

    Note: this field is disabled if you print from non-TDE applications " +"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.

    " msgstr "" @@ -5119,7 +5119,7 @@ msgid "" "document.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"
    " "

    " @@ -5143,7 +5143,7 @@ msgid "" "model).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-set=...        # example: \"odd\" or \"even\"

    " "" @@ -5158,7 +5158,7 @@ msgid "" "

    The 'Copies' setting defaults to 1.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o copies=...            # examples: \"5\" or \"42\"  "
 "
         -o outputorder=...       # example:  \"reverse\" "
@@ -5174,7 +5174,7 @@ msgid ""
 "and down arrows. You can also type the figure directly into the box. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o copies=...            # examples: \"5\" or \"42\"  
     
      "
 ""
@@ -5194,7 +5194,7 @@ msgid ""
 "3-3-3-...\".
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o Collate=...           # example:  \"true\" or \"false\"  
     
      "
 ""
@@ -5213,7 +5213,7 @@ msgid ""
 "checkbox at the same time. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o outputorder=...       # example:  \"reverse\"  
     
      "
 msgstr ""
@@ -5301,16 +5301,16 @@ msgstr ""
 
 #: kprintpreview.cpp:300
 msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
 "other external PostScript viewer could be found."
 msgstr ""
-"Pogled nije uspio: nije nađen niti interni KDE PostScript preglednik "
+"Pogled nije uspio: nije nađen niti interni TDE PostScript preglednik "
 "(KGhostView) niti neki drugi vanjski PostScript preglednik "
 
 #: kprintpreview.cpp:304
 #, c-format
 msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
 msgstr ""
 
 #: kprintpreview.cpp:314
@@ -5376,7 +5376,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-top=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     
      "
@@ -5397,7 +5397,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5418,7 +5418,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-left=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5439,7 +5439,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-right=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -5467,7 +5467,7 @@ msgid ""
 "The margin setting does not work if you load such files directly into  "
 "kprinter, which have their print margins hardcoded internally, like as most  "
 "PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-KDE applications which fail to  fully utilize the KDEPrint "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
 "framework, such as OpenOffice.org. 
      "
 msgstr ""
 
@@ -5522,14 +5522,14 @@ msgstr "JCL"
 #: kmvirtualmanager.cpp:161
 msgid ""
 "You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
 "Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
 "really want to set %1 as your personal default?"
 msgstr ""
 "Postavit ćete pseudo-pisač kao vašu uobičajeni pisač. Ova postavka je "
-"specifična za KDE i neće biti dostupna izvan KDE aplikacija. Primjetite da  vaš "
-"pisač neće prepoznavati samo ne-KDE aplikacije i neće vam onemogućiti normalno "
+"specifična za TDE i neće biti dostupna izvan TDE aplikacija. Primjetite da  vaš "
+"pisač neće prepoznavati samo ne-TDE aplikacije i neće vam onemogućiti normalno "
 "ispisivanje. Želite li zaista postaviti %1 kao vaš uobičajeni pisač?"
 
 #: kpposterpage.cpp:42
@@ -5545,7 +5545,7 @@ msgid ""
 "here, the 'Poster Printing' filter will be auto-loaded in  the "
 "'Filters' tab of this dialog. 
     "
 "
    This tab is only visible if the external 'poster' "
-"utility is  discovered by KDEPrint on your system. ['poster' "
+"utility is  discovered by TDEPrint on your system. ['poster' "
 "is a commandline  utility that enables you to convert PostScript files into "
 "tiled printouts  which allow for oversized appearance of the stitched-together "
 "tiles.] 
     "
@@ -5553,7 +5553,7 @@ msgid ""
 "must use a patched version of 'poster'. Ask your operating system vendor to  "
 "provide a patched version of 'poster' if he does not already. 
     "
 "
    Additional hint for power users: A patched version of 'poster' is  "
-"available from the KDEPrint Website  "
+"available from the TDEPrint Website  "
 "at http://printing.kde.org/downloads/.  The direct link to the patched source tarball is   Add Filter button "
 "
    This button calls a little dialog to let you select a filter here. 
     "
 "
    Note 1: You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (KDEPrint  checks your "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
 "filtering chain and will warn you if you fail to do so.
      "
 "
    Note 2: The filters you define here are applied to your jobfile  "
 "before it is handed downstream to your spooler and print  subsystem "
@@ -5768,7 +5768,7 @@ msgid ""
 "
    This field shows some general info about the selected filter.  Amongst them "
 "are:  "
 "
        "
-"
    • the filter name (as displayed in the KDEPrint user interface); "
+"
    • the filter name (as displayed in the TDEPrint user interface); "
 "
      •   "
 "
    • the filter requirements (that is the external program that needs  "
 "to present and executable on this system); 
      •   "
@@ -5785,7 +5785,7 @@ msgid ""
 "  Filtering Chain (if enabled, is run before "
 "actual  job submission to print system) "
 "
      This field shows which filters are currently selected to act as "
-"'pre-filters'  for KDEPrint. Pre-filters are processing the print files "
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
 "before they are  send downstream to your real print subsystem. 
        "
 "
      The list shown in this field may be empty (default). 
        "
 "
      The pre-filters act on the printjob in the order they are listed (from top "
@@ -5795,13 +5795,13 @@ msgid ""
 "example: if your file is ASCII text, and you want the  output being processed "
 "by the 'Multipage per Sheet' filter, the first filter must be  one that "
 "processes ASCII into PostScript. 
        "
-"
      KDEPrint can utilize any external filtering program which you may "
+"
      TDEPrint can utilize any external filtering program which you may "
 "find useful  through this interface. 
        "
-"
      KDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from KDEPrint. These "
-"pre-filters work for all print subsystems supported by KDEPrint (such "
+"
      TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work for all print subsystems supported by TDEPrint (such "
 "as CUPS, LPRng and LPD), because they are not depending on these.
       ."
-"
       Amongst the pre-configured filters shipping with KDEPrint are: 
        "
+"
       Amongst the pre-configured filters shipping with TDEPrint are: 
        "
 "
          "
 "
      • the Enscript text filter  
        •   "
 "
      • a Multiple Pages per Sheet filter  "
@@ -5812,7 +5812,7 @@ msgid ""
 "click on the funnel icon (topmost on  the right icon column group) and "
 "proceed. 
         "
 "
        Please click on the other elements of this dialog to learn more about the "
-"KDEPrint  pre-filters.  
         "
+"TDEPrint  pre-filters.  
         "
 msgstr ""
 
 #: kpfilterpage.cpp:125
@@ -5859,7 +5859,7 @@ msgid ""
 "
          "
 "
        • Color and
          •   "
 "
        • Grayscale
          Note: This selection field may be grayed "
-"out and made inactive.  This happens if KDEPrint can not retrieve  enough "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
 "information about your print file. In this case the embedded color- or "
 "grayscale information  of your printfile, and the default handling of the "
 "printer take precedence.  "
@@ -5929,8 +5929,8 @@ msgstr "Os&talo"
 #~ msgstr "&Postavke..."
 
 #, fuzzy
-#~ msgid "KDE Add Printer Wizard 
        This button starts the KDE Add Printer Wizard. (NOT if you use \"Generic LPD\" or \"LPRng\", or \"Print Through an External Program\".) Use the Wizard (with \"CUPS\" or \"RLPR\") to add locally defined printers to your system. "
-#~ msgstr "Ovaj gumb pokreće KDE-ov čarobnjak za dodavanje tiskača. (Samo ukoliko NE koristite Generički LPD, LPRng, ili Tiskanje kroz vanjski program.) Koristite čarobnjaka (sa CUPS-om ili RLPR-om) za dodavanje lokalno definiranih tiskača na vaš sustav."
+#~ msgid "TDE Add Printer Wizard 
        This button starts the TDE Add Printer Wizard. (NOT if you use \"Generic LPD\" or \"LPRng\", or \"Print Through an External Program\".) Use the Wizard (with \"CUPS\" or \"RLPR\") to add locally defined printers to your system. "
+#~ msgstr "Ovaj gumb pokreće TDE-ov čarobnjak za dodavanje tiskača. (Samo ukoliko NE koristite Generički LPD, LPRng, ili Tiskanje kroz vanjski program.) Koristite čarobnjaka (sa CUPS-om ili RLPR-om) za dodavanje lokalno definiranih tiskača na vaš sustav."
 
 #, fuzzy
 #~ msgid " Output Settings: Here you can determine the number of copies, the output order and the collate mode for the pages of your printjob."
@@ -5951,8 +5951,8 @@ msgstr "Os&talo"
 #~ msgid "Empty URI."
 #~ msgstr "Prazan URL."
 
-#~ msgid " This button expands or reduces the KDE printing dialog. KDEPrint will remember what you do here; next time, it will start this dialog 'expanded' or 'collapsed', depending on the mode you are using this time.... "
-#~ msgstr "Ovaj gumb proširuje ili skraćuje KDE dijalog za ispis. KDEPrint će upamtiti štoste ovdje radili, i slijedeći put će prikazati dijalog „proširenim“ ili „skraćenim“, ovisno o načinu radaa kojegsada koristite..."
+#~ msgid " This button expands or reduces the TDE printing dialog. TDEPrint will remember what you do here; next time, it will start this dialog 'expanded' or 'collapsed', depending on the mode you are using this time.... "
+#~ msgstr "Ovaj gumb proširuje ili skraćuje TDE dijalog za ispis. TDEPrint će upamtiti štoste ovdje radili, i slijedeći put će prikazati dijalog „proširenim“ ili „skraćenim“, ovisno o načinu radaa kojegsada koristite..."
 
 #~ msgid "Collaps&e"
 #~ msgstr "Sm&anji"
-- 
cgit v1.2.1