From 3b268265fa12c8a9a18d621eb739d79341bf37ac Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sat, 22 Dec 2018 16:32:53 +0000 Subject: Update translation files tdegraphics / kdvi Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. --- tde-i18n-lt/messages/tdegraphics/kdvi.po | 646 ++++++++++++++++--------------- 1 file changed, 327 insertions(+), 319 deletions(-) (limited to 'tde-i18n-lt/messages/tdegraphics') diff --git a/tde-i18n-lt/messages/tdegraphics/kdvi.po b/tde-i18n-lt/messages/tdegraphics/kdvi.po index cd7aade81f8..312b132375f 100644 --- a/tde-i18n-lt/messages/tdegraphics/kdvi.po +++ b/tde-i18n-lt/messages/tdegraphics/kdvi.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: kdvi\n" -"POT-Creation-Date: 2014-09-29 12:06-0500\n" +"POT-Creation-Date: 2018-12-21 14:20+0100\n" "PO-Revision-Date: 2005-09-02 17:29+0300\n" "Last-Translator: Donatas Glodenis \n" "Language-Team: Lithuanian \n" @@ -15,8 +15,22 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10.2\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>" -"=2 && (n%100<10 || n%100>=20) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n" +"%100<10 || n%100>=20) ? 1 : 2);\n" + +#: _translatorinfo:1 +#, fuzzy +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "(niekas)" + +#: _translatorinfo:2 +#, fuzzy +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "(niekas)" #: TeXFontDefinition.cpp:108 msgid "Cannot find font %1, file %2." @@ -46,7 +60,8 @@ msgstr "" #: TeXFont_PFB.cpp:44 msgid "" -"The font file %1 could be opened and read, but its font format is unsupported." +"The font file %1 could be opened and read, but its font format is " +"unsupported." msgstr "" #: TeXFont_PFB.cpp:50 @@ -108,29 +123,15 @@ msgstr "" msgid "Font has non-square aspect ratio " msgstr "" -#: _translatorinfo.cpp:1 -#, fuzzy -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "(niekas)" - -#: _translatorinfo.cpp:3 -#, fuzzy -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "(niekas)" - #: dviFile.cpp:112 msgid "The DVI file does not start with the preamble." msgstr "" #: dviFile.cpp:117 msgid "" -"The DVI file contains the wrong version of DVI output for this program. Hint: " -"If you use the typesetting system Omega, you have to use a special program, " -"such as oxdvi." +"The DVI file contains the wrong version of DVI output for this program. " +"Hint: If you use the typesetting system Omega, you have to use a special " +"program, such as oxdvi." msgstr "" #: dviFile.cpp:155 @@ -174,9 +175,13 @@ msgstr "" #: dviRenderer.cpp:277 msgid "" -"This DVI file contains source file information. You may click into the text " -"with the middle mouse button, and an editor will open the TeX-source file " -"immediately." +"This DVI file contains source file information. You may click into the " +"text with the middle mouse button, and an editor will open the TeX-source " +"file immediately." +msgstr "" + +#: dviRenderer.cpp:284 +msgid "Do not show this message again" msgstr "" #: dviRenderer.cpp:286 @@ -199,8 +204,8 @@ msgstr "" #: dviRenderer.cpp:439 msgid "" -"File error. The specified file '%1' does not exist. KDVI " -"already tried to add the ending '.dvi'." +"File error. The specified file '%1' does not exist. " +"KDVI already tried to add the ending '.dvi'." msgstr "" #: dviRenderer.cpp:441 @@ -209,23 +214,23 @@ msgstr "" #: dviRenderer.cpp:452 msgid "" -"Could not open file %1 which has type " -"%2. KDVI can only load DVI (.dvi) files." +"Could not open file %1 which has type " +"%2. KDVI can only load DVI (.dvi) files." msgstr "" #: dviRenderer.cpp:463 dviRenderer.cpp:481 msgid "" -"File corruption! KDVI had trouble interpreting your DVI file. Most likely " -"this means that the DVI file is broken." +"File corruption! KDVI had trouble interpreting your DVI file. Most " +"likely this means that the DVI file is broken." msgstr "" #: dviRenderer.cpp:640 msgid "" -"You have asked KDVI to locate the place in the DVI file which corresponds " -"to line %1 in the TeX-file %2. It seems, however, that the DVI " -"file does not contain the necessary source file information. We refer to the " -"manual of KDVI for a detailed explanation on how to include this information. " -"Press the F1 key to open the manual." +"You have asked KDVI to locate the place in the DVI file which " +"corresponds to line %1 in the TeX-file %2. It seems, " +"however, that the DVI file does not contain the necessary source file " +"information. We refer to the manual of KDVI for a detailed explanation on " +"how to include this information. Press the F1 key to open the manual." msgstr "" #: dviRenderer.cpp:645 dviRenderer.cpp:685 @@ -234,14 +239,14 @@ msgstr "" #: dviRenderer.cpp:683 msgid "" -"KDVI was not able to locate the place in the DVI file which corresponds to " -"line %1 in the TeX-file %2." +"KDVI was not able to locate the place in the DVI file which corresponds " +"to line %1 in the TeX-file %2." msgstr "" #: dviRenderer.cpp:737 msgid "" -"The DVI-file refers to the TeX-file %1 " -"which could not be found." +"The DVI-file refers to the TeX-file %1 which could not be " +"found." msgstr "" #: dviRenderer.cpp:740 @@ -251,8 +256,8 @@ msgstr "" #: dviRenderer.cpp:747 msgid "" "You have not yet specified an editor for inverse search. Please choose your " -"favorite editor in the DVI options dialog " -"which you will find in the Settings-menu." +"favorite editor in the DVI options dialog which you will " +"find in the Settings-menu." msgstr "" #: dviRenderer.cpp:752 @@ -265,15 +270,12 @@ msgstr "" #: dviRenderer.cpp:785 msgid "" -"The external program" -"
" -"
%1" -"
" -"
which was used to call the editor for inverse search, reported an error. " -"You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report. The manual for " -"KDVI contains a detailed explanation how to set up your editor for use with " -"KDVI, and a list of common problems." +"The external program

%1

which " +"was used to call the editor for inverse search, reported an error. You might " +"wish to look at the document info dialog which you will " +"find in the File-Menu for a precise error report. The manual for KDVI " +"contains a detailed explanation how to set up your editor for use with KDVI, " +"and a list of common problems." msgstr "" #: dviRenderer.cpp:791 @@ -310,14 +312,14 @@ msgstr "" #: dviRenderer_export.cpp:84 msgid "" -"KDVI could not locate the program 'dvipdfm' on your computer. That program is " -"essential for the export function to work. You can, however, convert the " -"DVI-file to PDF using the print function of KDVI, but that will often produce " -"documents which print ok, but are of inferior quality if viewed in the Acrobat " -"Reader. It may be wise to upgrade to a more recent version of your TeX " -"distribution which includes the 'dvipdfm' program.\n" -"Hint to the perplexed system administrator: KDVI uses the shell's PATH variable " -"when looking for programs." +"KDVI could not locate the program 'dvipdfm' on your computer. That program " +"is essential for the export function to work. You can, however, convert the " +"DVI-file to PDF using the print function of KDVI, but that will often " +"produce documents which print ok, but are of inferior quality if viewed in " +"the Acrobat Reader. It may be wise to upgrade to a more recent version of " +"your TeX distribution which includes the 'dvipdfm' program.\n" +"Hint to the perplexed system administrator: KDVI uses the shell's PATH " +"variable when looking for programs." msgstr "" #: dviRenderer_export.cpp:99 @@ -328,15 +330,13 @@ msgstr "" msgid "Export File As" msgstr "Eksportuoti bylą kaip" -#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 -#: kdvi_multipage.cpp:164 +#: dviRenderer_export.cpp:104 dviRenderer_export.cpp:203 kdvi_multipage.cpp:164 msgid "" "The file %1\n" "exists. Do you want to overwrite that file?" msgstr "" -#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 -#: kdvi_multipage.cpp:165 +#: dviRenderer_export.cpp:105 dviRenderer_export.cpp:204 kdvi_multipage.cpp:165 #, fuzzy msgid "Overwrite File" msgstr "Perrašyti bylą" @@ -351,9 +351,9 @@ msgstr "" #: dviRenderer_export.cpp:114 msgid "" -"KDVI is currently using the external program 'dvipdfm' to convert your DVI-file " -"to PDF. Sometimes that can take a while because dvipdfm needs to generate its " -"own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvipdfm' to convert your DVI-" +"file to PDF. Sometimes that can take a while because dvipdfm needs to " +"generate its own bitmap fonts Please be patient." msgstr "" #: dviRenderer_export.cpp:118 @@ -370,9 +370,10 @@ msgstr "" #: dviRenderer_export.cpp:137 msgid "" -"The external program 'dvipdf', which was used to export the file, reported " -"an error. You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report." +"The external program 'dvipdf', which was used to export the file, " +"reported an error. You might wish to look at the document info " +"dialog which you will find in the File-Menu for a precise error " +"report." msgstr "" #: dviRenderer_export.cpp:140 @@ -385,11 +386,10 @@ msgid "" "PostScript format, and cannot be handled by the dvips " "program that KDVI uses interally to print or to export to PostScript. The " "functionality that you require is therefore unavailable in this version of " -"KDVI.

" -"

As a workaround, you can use the File/Export As" -"-Menu to save this file in PDF format, and then use a PDF viewer.

" -"

The author of KDVI apologizes for the inconvenience. If enough users " -"complain, the missing functionality might later be added.

" +"KDVI.

As a workaround, you can use the File/Export As-" +"Menu to save this file in PDF format, and then use a PDF viewer.

The " +"author of KDVI apologizes for the inconvenience. If enough users complain, " +"the missing functionality might later be added.

" msgstr "" #: dviRenderer_export.cpp:188 @@ -406,9 +406,9 @@ msgstr "" #: dviRenderer_export.cpp:217 msgid "" -"KDVI is currently using the external program 'dvips' to convert your DVI-file " -"to PostScript. Sometimes that can take a while because dvips needs to generate " -"its own bitmap fonts Please be patient." +"KDVI is currently using the external program 'dvips' to convert your DVI-" +"file to PostScript. Sometimes that can take a while because dvips needs to " +"generate its own bitmap fonts Please be patient." msgstr "" #: dviRenderer_export.cpp:221 @@ -421,9 +421,10 @@ msgstr "" #: dviRenderer_export.cpp:300 msgid "" -"The external program 'dvips', which was used to export the file, reported " -"an error. You might wish to look at the document info dialog " -"which you will find in the File-Menu for a precise error report." +"The external program 'dvips', which was used to export the file, " +"reported an error. You might wish to look at the document info " +"dialog which you will find in the File-Menu for a precise error " +"report." msgstr "" #: dviRenderer_export.cpp:303 @@ -437,8 +438,7 @@ msgstr "" #: dviRenderer_prescan.cpp:105 msgid "" -"Page %1: The PostScript file %2 could not be found." -"
" +"Page %1: The PostScript file %2 could not be found.
" msgstr "" #: dviRenderer_prescan.cpp:255 @@ -460,8 +460,9 @@ msgstr "" #: fontpool.cpp:48 msgid "" "KDVI is currently generating bitmap fonts which are needed to display your " -"document. For this, KDVI uses a number of external programs, such as MetaFont. " -"You can find the output of these programs later in the document info dialog." +"document. For this, KDVI uses a number of external programs, such as " +"MetaFont. You can find the output of these programs later in the document " +"info dialog." msgstr "" #: fontpool.cpp:51 @@ -485,6 +486,10 @@ msgstr "" msgid "Family" msgstr "Šeima" +#: fontpool.cpp:192 +msgid "Zoom" +msgstr "" + #: fontpool.cpp:193 msgid "Type" msgstr "Tipas" @@ -503,8 +508,7 @@ msgstr "" #: fontpool.cpp:284 msgid "" -"" -"

KDVI was not able to locate all the font files which are necessary to " +"

KDVI was not able to locate all the font files which are necessary to " "display the current DVI file. Your document might be unreadable.

" msgstr "" @@ -526,9 +530,8 @@ msgstr "" msgid "" "

The shell process for the kpsewhich program could not be started. " "Consequently, some font files could not be found, and your document might by " -"unreadable. If this error is reproducable please report the issue to the KDVI " -"developers using the 'Help' menu." -"

" +"unreadable. If this error is reproducable please report the issue to the " +"KDVI developers using the 'Help' menu.

" msgstr "" #: fontpool.cpp:367 fontpool.cpp:405 @@ -542,14 +545,14 @@ msgstr "" #: fontpool.cpp:394 msgid "" "

There were problems running kpsewhich. As a result, some font files could " -"not be located, and your document might be unreadable.

" -"

Possible reason: The kpsewhich program is perhaps not installed on " -"your system, or it cannot be found in the current search path.

" -"

What you can do: The kpsewhich program is normally contained in " -"distributions of the TeX typesetting system. If TeX is not installed on your " -"system, you could install the TeTeX distribution (www.tetex.org). If you are " -"sure that TeX is installed, please try to use the kpsewhich program from the " -"command line to check if it really works.

" +"not be located, and your document might be unreadable.

Possible " +"reason: The kpsewhich program is perhaps not installed on your system, " +"or it cannot be found in the current search path.

What you can do: The kpsewhich program is normally contained in distributions of the TeX " +"typesetting system. If TeX is not installed on your system, you could " +"install the TeTeX distribution (www.tetex.org). If you are sure that TeX is " +"installed, please try to use the kpsewhich program from the command line to " +"check if it really works.

" msgstr "" #: fontpool.cpp:590 @@ -581,6 +584,10 @@ msgstr "" msgid "Information on the currently loaded DVI-file." msgstr "" +#: infodialog.cpp:33 +msgid "Fonts" +msgstr "" + #: infodialog.cpp:38 msgid "Information on currently loaded fonts." msgstr "" @@ -588,8 +595,8 @@ msgstr "" #: infodialog.cpp:39 msgid "" "This text field shows detailed information about the currently loaded fonts. " -"This is useful for experts who want to locate problems in the setup of TeX or " -"KDVI." +"This is useful for experts who want to locate problems in the setup of TeX " +"or KDVI." msgstr "" #: infodialog.cpp:43 @@ -607,8 +614,8 @@ msgstr "" #: infodialog.cpp:48 msgid "" "KDVI uses external programs, such as MetaFont, dvipdfm or dvips. This text " -"field shows the output of these programs. That is useful for experts who want " -"to find problems in the setup of TeX or KDVI." +"field shows the output of these programs. That is useful for experts who " +"want to find problems in the setup of TeX or KDVI." msgstr "" #: infodialog.cpp:64 @@ -668,8 +675,8 @@ msgstr "" #: kdvi_multipage.cpp:105 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "KDVI 1.3 is based on original code from KDVI version 0.43 and xdvik." msgstr "" @@ -721,8 +728,8 @@ msgstr "Spausdinti %1" #: kdvi_multipage.cpp:251 msgid "" "The list of pages you selected was empty.\n" -"Maybe you made an error in selecting the pages, e.g. by giving an invalid range " -"like '7-2'." +"Maybe you made an error in selecting the pages, e.g. by giving an invalid " +"range like '7-2'." msgstr "" #: kdvi_multipage.cpp:414 @@ -734,8 +741,8 @@ msgid "" "This function searches the DVI file for plain text. Unfortunately, this " "version of KDVI treats only plain ASCII characters properly. Symbols, " "ligatures, mathematical formulae, accented characters, and non-English text, " -"such as Russian or Korean, will most likely be messed up completely. Continue " -"anyway?" +"such as Russian or Korean, will most likely be messed up completely. " +"Continue anyway?" msgstr "" #: kdvi_multipage.cpp:469 kdvi_multipage_texthandling.cpp:64 @@ -760,8 +767,8 @@ msgid "" "Check if the file is loaded in another KDVI.\n" "If it is, bring up the other KDVI. Otherwise, load the file." msgstr "" -"Patikrinkite, ar puslapis nėra įkeltas kitame kviewshell. Jei taip, pereikite į " -"kitą kviewshell. Priešingu atveju, įkelkite bylą." +"Patikrinkite, ar puslapis nėra įkeltas kitame kviewshell. Jei taip, " +"pereikite į kitą kviewshell. Priešingu atveju, įkelkite bylą." #: main.cpp:23 #, fuzzy @@ -774,8 +781,8 @@ msgstr "Įkeltinos bylos" #: main.cpp:37 msgid "" -"This program displays Device Independent (DVI) files which are produced by the " -"TeX typesetting system.\n" +"This program displays Device Independent (DVI) files which are produced by " +"the TeX typesetting system.\n" "This KDVI version is based on original code from KDVI version 0.43 and xdvik." msgstr "" @@ -785,8 +792,8 @@ msgstr "URL %1 nėra gerai suformuotas." #: main.cpp:86 msgid "" -"The URL %1 does not point to a local file. You can only specify local files if " -"you are using the '--unique' option." +"The URL %1 does not point to a local file. You can only specify local files " +"if you are using the '--unique' option." msgstr "" "URL %1 nerodo į vietinę bylą. Galima nurodyti tik vietines byla, jeigu " "naudojate parinktį „--unique“." @@ -842,333 +849,334 @@ msgstr "" #: psgs.cpp:250 msgid "" "The version of Ghostview that is installed on this computer does not " -"contain any of the Ghostview device drivers that are known to KDVI. PostScript " -"support has therefore been turned off in KDVI." +"contain any of the Ghostview device drivers that are known to KDVI. " +"PostScript support has therefore been turned off in KDVI." msgstr "" #: psgs.cpp:253 msgid "" -"" -"

The Ghostview program, which KDVI uses internally to display the PostScript " -"graphics that is included in this DVI file, is generally able to write its " -"output in a variety of formats. The sub-programs that Ghostview uses for these " -"tasks are called 'device drivers'; there is one device driver for each format " -"that Ghostview is able to write. Different versions of Ghostview often have " -"different sets of device drivers available. It seems that the version of " -"Ghostview that is installed on this computer does not contain " -"any of the device drivers that are known to KDVI.

" -"

It seems unlikely that a regular installation of Ghostview would not contain " -"these drivers. This error may therefore point to a serious misconfiguration of " -"the Ghostview installation on your computer.

" -"

If you want to fix the problems with Ghostview, you can use the command " -"gs --help to display the list of device drivers contained in " -"Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' drivers. " -"Note that KDVI needs to be restarted to re-enable PostScript support.

" -msgstr "" - -#. i18n: file kdvi_part.rc line 6 -#: rc.cpp:6 -#, no-c-format -msgid "Export As" +"

The Ghostview program, which KDVI uses internally to display the " +"PostScript graphics that is included in this DVI file, is generally able to " +"write its output in a variety of formats. The sub-programs that Ghostview " +"uses for these tasks are called 'device drivers'; there is one device driver " +"for each format that Ghostview is able to write. Different versions of " +"Ghostview often have different sets of device drivers available. It seems " +"that the version of Ghostview that is installed on this computer does not " +"contain any of the device drivers that are known to KDVI.

It seems unlikely that a regular installation of Ghostview would not " +"contain these drivers. This error may therefore point to a serious " +"misconfiguration of the Ghostview installation on your computer.

If " +"you want to fix the problems with Ghostview, you can use the command " +"gs --help to display the list of device drivers contained " +"in Ghostview. Among others, KDVI can use the 'png256', 'jpeg' and 'pnm' " +"drivers. Note that KDVI needs to be restarted to re-enable PostScript " +"support.

" msgstr "" -#. i18n: file optionDialogFontsWidget_base.ui line 28 -#: rc.cpp:18 -#, no-c-format -msgid "Use font hinting for Type 1 fonts, if available" +#: special.cpp:39 +msgid "That makes 25 errors. Further error messages will not be printed." msgstr "" -#. i18n: file optionDialogFontsWidget_base.ui line 31 -#: rc.cpp:21 -#, no-c-format +#: special.cpp:224 msgid "" -"You should enable this, if the use of font hinting improves readability on your " -"machine." +"Error in DVIfile '%1', page %2. Color pop command issued when the color " +"stack is empty." msgstr "" -#. i18n: file optionDialogFontsWidget_base.ui line 34 -#: rc.cpp:24 -#, no-c-format +#: special.cpp:309 msgid "" -"Many modern fonts contain \"font hinting\" information which can be used to " -"improve the appearance of a font on low-resolution displays, such as a computer " -"monitor, or a notebook screen. However, many people find the \"improved\" fonts " -"quite ugly and prefer to have this option disabled." -msgstr "" - -#. i18n: file optionDialogSpecialWidget_base.ui line 27 -#: rc.cpp:27 -#, no-c-format -msgid "Show PostScript specials" +"Malformed parameter in the epsf special command.\n" +"Expected a float to follow %1 in %2" msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 30 -#: rc.cpp:30 -#, no-c-format -msgid "If in doubt, enable this option." +#: special.cpp:435 +#, c-format +msgid "" +"File not found: \n" +" %1" msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 33 -#: rc.cpp:33 rc.cpp:83 -#, no-c-format +#: special.cpp:702 msgid "" -"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " -"Ghostview PostScript interpreter to display these. You probably want to enable " -"this option, unless you have a DVI-file whose PostScript part is broken, or too " -"large for your machine." +"Error in DVIfile '%1', page %2. Could not interpret angle in text rotation " +"special." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 41 -#: rc.cpp:36 -#, no-c-format -msgid "Editor for Inverse Search" +#: special.cpp:725 +msgid "The special command '%1' is not implemented." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 60 -#: rc.cpp:39 -#, no-c-format -msgid "Choose an editor which is used in inverse search." +#: util.cpp:75 +msgid "Fatal Error! " msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 64 -#: rc.cpp:42 -#, no-c-format +#: util.cpp:78 msgid "" -"

Some DVI files contain 'inverse search' information. If such a DVI file is " -"loaded, you can right-click into KDVI and an editor will open, load the TeX " -"file and jump to the correct position. You can select your favorite editor " -"here. If in doubt, 'nedit' is usually a good choice.

\n" -"

Check the KDVI manual to see how to prepare DVI files which support the " -"inverse search.

" +"Fatal error.\n" +"\n" msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 80 -#: rc.cpp:46 -#, fuzzy, no-c-format -msgid "Description:" -msgstr "Aprašymas:" - -#. i18n: file optionDialogSpecialWidget_base.ui line 96 -#: rc.cpp:49 -#, no-c-format -msgid "Shell command:" -msgstr "Apvalkalo komanda" - -#. i18n: file optionDialogSpecialWidget_base.ui line 115 -#: rc.cpp:52 -#, no-c-format +#: util.cpp:80 msgid "" -"Explains about the editor's capabilities in conjunction with inverse search." +"\n" +"\n" +"This probably means that either you found a bug in KDVI,\n" +"or that the DVI file, or auxiliary files (such as font files, \n" +"or virtual font files) were really badly broken.\n" +"KDVI will abort after this message. If you believe that you \n" +"found a bug, or that KDVI should behave better in this situation\n" +"please report the problem." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 119 -#: rc.cpp:55 -#, no-c-format -msgid "" -"

Not all editors are well suited for inverse search. For instance, many " -"editors have no command like 'If the file is not yet loaded, load it. " -"Otherwise, bring the window with the file to the front'. If you are using an " -"editor like this, clicking into the DVI file will always open a new editor, " -"even if the TeX file is already open. Likewise, many editors have no command " -"line argument that would allow KDVI to specify the exact line which you wish to " -"edit.

\n" -"

If you feel that KDVI's support for a certain editor is inadequate, please " -"contact the Trinity developers at www.trinitydesktop.org.

" +#: vf.cpp:86 +msgid "Checksum mismatch" msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 135 -#: rc.cpp:59 -#, no-c-format -msgid "Shell-command line used to start the editor." +#: vf.cpp:87 +msgid " in font file " msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 138 -#: rc.cpp:62 -#, no-c-format -msgid "" -"If you are using inverse search, KDVI uses this command line to start the " -"editor. The field '%f' is replaced with the filename, and '%l' is replaced with " -"the line number." +#: vf.cpp:132 +msgid "Could not allocate memory for a macro table." msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 154 -#: rc.cpp:65 -#, no-c-format -msgid "Editor:" +#: vf.cpp:149 +msgid "Virtual character " msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 170 -#: rc.cpp:68 -#, no-c-format -msgid "What is 'inverse search'? " +#: vf.cpp:149 +msgid " in font " msgstr "" -#. i18n: file optionDialogSpecialWidget_base.ui line 176 -#: rc.cpp:71 -#, no-c-format -msgid "inv-search" +#: vf.cpp:150 +msgid " ignored." msgstr "" -#. i18n: file kdvi.kcfg line 10 -#: rc.cpp:74 +#: vf.cpp:180 +#, c-format +msgid "Wrong command byte found in VF macro list: %1" +msgstr "" + +#: kdvi.kcfg:10 #, no-c-format msgid "" "Use MetaFont to generate missing fonts. If in doubt, enable this option." msgstr "" -#. i18n: file kdvi.kcfg line 11 -#: rc.cpp:77 +#: kdvi.kcfg:11 #, no-c-format msgid "" "Allows KDVI to use MetaFont to produce bitmap fonts. Unless you have a very " "specific reason, you probably want to enable this option." msgstr "" -#. i18n: file kdvi.kcfg line 15 -#: rc.cpp:80 +#: kdvi.kcfg:15 #, no-c-format msgid "Show PostScript specials. If in doubt, enable this option." msgstr "" -#. i18n: file kdvi.kcfg line 20 -#: rc.cpp:86 +#: kdvi.kcfg:16 optionDialogSpecialWidget_base.ui:33 +#, no-c-format +msgid "" +"Some DVI files contain PostScript graphics. If enabled, KDVI will use the " +"Ghostview PostScript interpreter to display these. You probably want to " +"enable this option, unless you have a DVI-file whose PostScript part is " +"broken, or too large for your machine." +msgstr "" + +#: kdvi.kcfg:20 #, no-c-format msgid "" -"Use font hinting. You should enable this, if the use of font hinting improves " -"readability on your machine." +"Use font hinting. You should enable this, if the use of font hinting " +"improves readability on your machine." msgstr "" -#. i18n: file kdvi.kcfg line 21 -#: rc.cpp:89 +#: kdvi.kcfg:21 #, no-c-format msgid "" "Many modern fonts contain "font hinting" information which can be " -"used to improve the appearance of a font on low-resolution displays, such as a " -"computer monitor, or a notebook screen. However, many people find the " -""improved" fonts quite ugly and prefer to have this option disabled." +"used to improve the appearance of a font on low-resolution displays, such as " +"a computer monitor, or a notebook screen. However, many people find the " +""improved" fonts quite ugly and prefer to have this option " +"disabled." msgstr "" -#: special.cpp:39 -msgid "That makes 25 errors. Further error messages will not be printed." +#: kdvi_part.rc:4 +#, fuzzy, no-c-format +msgid "&File" +msgstr "Bylos vardas" + +#: kdvi_part.rc:6 +#, no-c-format +msgid "Export As" msgstr "" -#: special.cpp:224 -msgid "" -"Error in DVIfile '%1', page %2. Color pop command issued when the color stack " -"is empty." +#: kdvi_part.rc:12 +#, no-c-format +msgid "&Edit" msgstr "" -#: special.cpp:309 -msgid "" -"Malformed parameter in the epsf special command.\n" -"Expected a float to follow %1 in %2" +#: kdvi_part.rc:17 +#, no-c-format +msgid "&Settings" msgstr "" -#: special.cpp:435 -#, c-format +#: kdvi_part.rc:21 +#, no-c-format +msgid "&Help" +msgstr "" + +#: optionDialogFontsWidget_base.ui:28 +#, no-c-format +msgid "Use font hinting for Type 1 fonts, if available" +msgstr "" + +#: optionDialogFontsWidget_base.ui:31 +#, no-c-format msgid "" -"File not found: \n" -" %1" +"You should enable this, if the use of font hinting improves readability on " +"your machine." msgstr "" -#: special.cpp:702 +#: optionDialogFontsWidget_base.ui:34 +#, no-c-format msgid "" -"Error in DVIfile '%1', page %2. Could not interpret angle in text rotation " -"special." +"Many modern fonts contain \"font hinting\" information which can be used to " +"improve the appearance of a font on low-resolution displays, such as a " +"computer monitor, or a notebook screen. However, many people find the " +"\"improved\" fonts quite ugly and prefer to have this option disabled." msgstr "" -#: special.cpp:725 -msgid "The special command '%1' is not implemented." +#: optionDialogSpecialWidget_base.ui:27 +#, no-c-format +msgid "Show PostScript specials" msgstr "" -#: util.cpp:75 -msgid "Fatal Error! " +#: optionDialogSpecialWidget_base.ui:30 +#, no-c-format +msgid "If in doubt, enable this option." msgstr "" -#: util.cpp:78 -msgid "" -"Fatal error.\n" -"\n" +#: optionDialogSpecialWidget_base.ui:41 +#, no-c-format +msgid "Editor for Inverse Search" msgstr "" -#: util.cpp:80 +#: optionDialogSpecialWidget_base.ui:60 +#, no-c-format +msgid "Choose an editor which is used in inverse search." +msgstr "" + +#: optionDialogSpecialWidget_base.ui:63 +#, no-c-format msgid "" -"\n" -"\n" -"This probably means that either you found a bug in KDVI,\n" -"or that the DVI file, or auxiliary files (such as font files, \n" -"or virtual font files) were really badly broken.\n" -"KDVI will abort after this message. If you believe that you \n" -"found a bug, or that KDVI should behave better in this situation\n" -"please report the problem." +"

Some DVI files contain 'inverse search' information. If such a DVI file " +"is loaded, you can right-click into KDVI and an editor will open, load the " +"TeX file and jump to the correct position. You can select your favorite " +"editor here. If in doubt, 'nedit' is usually a good choice.

\n" +"

Check the KDVI manual to see how to prepare DVI files which support the " +"inverse search.

" msgstr "" -#: vf.cpp:86 -msgid "Checksum mismatch" +#: optionDialogSpecialWidget_base.ui:80 +#, fuzzy, no-c-format +msgid "Description:" +msgstr "Aprašymas:" + +#: optionDialogSpecialWidget_base.ui:96 +#, no-c-format +msgid "Shell command:" +msgstr "Apvalkalo komanda" + +#: optionDialogSpecialWidget_base.ui:115 +#, no-c-format +msgid "" +"Explains about the editor's capabilities in conjunction with inverse search." msgstr "" -#: vf.cpp:87 -msgid " in font file " +#: optionDialogSpecialWidget_base.ui:118 +#, no-c-format +msgid "" +"

Not all editors are well suited for inverse search. For instance, many " +"editors have no command like 'If the file is not yet loaded, load it. " +"Otherwise, bring the window with the file to the front'. If you are using an " +"editor like this, clicking into the DVI file will always open a new editor, " +"even if the TeX file is already open. Likewise, many editors have no command " +"line argument that would allow KDVI to specify the exact line which you wish " +"to edit.

\n" +"

If you feel that KDVI's support for a certain editor is inadequate, " +"please contact the Trinity developers at www.trinitydesktop.org.

" msgstr "" -#: vf.cpp:132 -msgid "Could not allocate memory for a macro table." +#: optionDialogSpecialWidget_base.ui:135 +#, no-c-format +msgid "Shell-command line used to start the editor." msgstr "" -#: vf.cpp:149 -msgid "Virtual character " +#: optionDialogSpecialWidget_base.ui:138 +#, no-c-format +msgid "" +"If you are using inverse search, KDVI uses this command line to start the " +"editor. The field '%f' is replaced with the filename, and '%l' is replaced " +"with the line number." msgstr "" -#: vf.cpp:149 -msgid " in font " +#: optionDialogSpecialWidget_base.ui:154 +#, no-c-format +msgid "Editor:" msgstr "" -#: vf.cpp:150 -msgid " ignored." +#: optionDialogSpecialWidget_base.ui:170 +#, no-c-format +msgid "What is 'inverse search'? " msgstr "" -#: vf.cpp:180 -#, c-format -msgid "Wrong command byte found in VF macro list: %1" +#: optionDialogSpecialWidget_base.ui:176 +#, no-c-format +msgid "inv-search" msgstr "" -#: tips.txt:3 -msgid "" -"

...that KDVI can also load compressed DVI-files? \n" +#: tips:3 +msgid "

...that KDVI can also load compressed DVI-files? \n" msgstr "" -#: tips.txt:8 +#: tips:9 msgid "" "

...that you can mark text with the right mouse button and paste it\n" "into any application?\n" msgstr "" -#: tips.txt:14 +#: tips:16 msgid "" -"

...that KDVI now supports inverse search? You can click into your DVI file \n" +"

...that KDVI now supports inverse search? You can click into your DVI " +"file \n" "with the middle mouse button and your editor opens, loads the TeX file, and\n" "jumps to the proper line! The \n" "manual explains how to set up your editor for this. \n" msgstr "" -#: tips.txt:22 +#: tips:25 msgid "" -"

...that KDVI supports forward search? If you use Emacs or XEmacs, you can \n" +"

...that KDVI supports forward search? If you use Emacs or XEmacs, you " +"can \n" "jump directly from the TeX file to the associated place in the DVI file. \n" -"The manual explains how to set up \n" +"The manual explains how to set " +"up \n" "your editor for this. \n" msgstr "" -#: tips.txt:30 -msgid "" -"

...that KDVI now offers full text search? \n" +#: tips:34 +msgid "

...that KDVI now offers full text search? \n" msgstr "" -#: tips.txt:35 +#: tips:40 msgid "" -"

...that KDVI can save your DVI file as PostScript, PDF, and even plain text? " -"\n" +"

...that KDVI can save your DVI file as PostScript, PDF, and even plain " +"text? \n" msgstr "" -#~ msgid "Sets paper size (not implemented at the moment, only for compatibility with lyx)" -#~ msgstr "Nustatys puslapio dydį (dar šiuo metu nerealizuota, dera tik su lyx)" +#~ msgid "" +#~ "Sets paper size (not implemented at the moment, only for compatibility " +#~ "with lyx)" +#~ msgstr "" +#~ "Nustatys puslapio dydį (dar šiuo metu nerealizuota, dera tik su lyx)" -- cgit v1.2.1