From 48fc97bd7b0703f63b943c56148a48cff8d87fa6 Mon Sep 17 00:00:00 2001 From: TDE Weblate Date: Sun, 9 Dec 2018 19:03:49 +0000 Subject: Update translation files Updated by Update PO files to match POT (msgmerge) hook in Weblate. (cherry picked from commit a00e23b3d2a2ca065c585f305c106a3a27219ad4) --- tde-i18n-ms/messages/tdelibs/cupsdconf.po | 2608 ++++++++++++++++------------- 1 file changed, 1398 insertions(+), 1210 deletions(-) (limited to 'tde-i18n-ms') diff --git a/tde-i18n-ms/messages/tdelibs/cupsdconf.po b/tde-i18n-ms/messages/tdelibs/cupsdconf.po index 097e47ec99f..1776d4a9032 100644 --- a/tde-i18n-ms/messages/tdelibs/cupsdconf.po +++ b/tde-i18n-ms/messages/tdelibs/cupsdconf.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: cupsdconf\n" -"POT-Creation-Date: 2014-11-05 10:15-0600\n" +"POT-Creation-Date: 2018-12-07 05:08+0100\n" "PO-Revision-Date: 2007-07-15 13:45+0800\n" "Last-Translator: Sharuzzaman Ahmat Raslan \n" "Language-Team: Malay \n" @@ -18,6 +18,18 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.3.1\n" +#: _translatorinfo:1 +msgid "" +"_: NAME OF TRANSLATORS\n" +"Your names" +msgstr "" + +#: _translatorinfo:2 +msgid "" +"_: EMAIL OF TRANSLATORS\n" +"Your emails" +msgstr "" + #: addressdialog.cpp:30 msgid "ACL Address" msgstr "Alamat ACL" @@ -180,8 +192,8 @@ msgstr "Ralat Penyelarasan CUPS" #: cupsddialog.cpp:197 msgid "" -"Some options were not recognized by this configuration tool. They will be left " -"untouched and you won't be able to change them." +"Some options were not recognized by this configuration tool. They will be " +"left untouched and you won't be able to change them." msgstr "" "Terdapat pilihan yang tidak dikenali oleh alatan konfigurasi ini. IA akan " "ditinggalkan tidak berusik dan anda tidak akan dapat mengubahnya." @@ -200,8 +212,8 @@ msgstr "Gagal memulakan semula pelayan CUPS (pid = %1)" #: cupsddialog.cpp:249 msgid "" -"Unable to retrieve configuration file from the CUPS server. You probably don't " -"have the access permissions to perform this operation." +"Unable to retrieve configuration file from the CUPS server. You probably " +"don't have the access permissions to perform this operation." msgstr "" "Tidak dapat mengambil fail konfigurasi daripada pelayan CUPS. Anda mungkin " "tidak mempunyai kebenaran capaian untuk melakukan operasi ini." @@ -216,15 +228,15 @@ msgstr "Ralat dalaman: fail kosong '%1'!" #: cupsddialog.cpp:280 msgid "" -"The config file has not been uploaded to the CUPS server. The daemon will not " -"be restarted." +"The config file has not been uploaded to the CUPS server. The daemon will " +"not be restarted." msgstr "" "Fail konfig belum dimuatnaik ke pelayan CUPS. Daemon belum diulanghidup." #: cupsddialog.cpp:284 msgid "" -"Unable to upload the configuration file to CUPS server. You probably don't have " -"the access permissions to perform this operation." +"Unable to upload the configuration file to CUPS server. You probably don't " +"have the access permissions to perform this operation." msgstr "" "Tidak dapat muatnaik fail konfigurasi ke pelayan CUPS. Anda mungkin tidak " "mempunyai kebenaran capaian untuk melakukan operasi ini." @@ -400,6 +412,14 @@ msgstr "Tetapan Rangkaian" msgid "Keep alive" msgstr "Biarkan hidup" +#: cupsdnetworkpage.cpp:63 +msgid "Off" +msgstr "" + +#: cupsdnetworkpage.cpp:64 +msgid "On" +msgstr "" + #: cupsdnetworkpage.cpp:65 msgid "Double" msgstr "Ganda dua" @@ -460,7 +480,12 @@ msgstr "Lokasi:" msgid "" "This location is already defined. Do you want to replace the existing one?" msgstr "" -" Lokasi ini telah ditakrifkan. Adakah anda mahu menggantikan dengan yang baru?" +" Lokasi ini telah ditakrifkan. Adakah anda mahu menggantikan dengan yang " +"baru?" + +#: cupsdsecuritypage.cpp:128 +msgid "Replace" +msgstr "" #: cupsdserverpage.cpp:43 msgid "Server" @@ -541,24 +566,21 @@ msgstr "Selamat Datang" #: cupsdsplash.cpp:49 msgid "" "

This tool will help you to configure graphically the server of the CUPS " -"printing system. The available options are grouped into sets of related topics " -"and can be accessed quickly through the icon view located on the left. Each " -"option has a default value that is shown if it has not been previously set. " -"This default value should be OK in most cases.

" -"
" -"

You can access a short help message for each option using either the '?' " -"button in the the title bar, or the button at the bottom of this dialog.

" +"printing system. The available options are grouped into sets of related " +"topics and can be accessed quickly through the icon view located on the " +"left. Each option has a default value that is shown if it has not been " +"previously set. This default value should be OK in most cases.


You " +"can access a short help message for each option using either the '?' button " +"in the the title bar, or the button at the bottom of this dialog.

" msgstr "" "

Alatan ini akan membantu anda untuk menetapkan secara grafik pelayan bagi " "sistem cetakan CUPS. Pilihan yang didapati dikumpulkan ke dalam set topik " "berkaitan dan boleh diakses dengan cepat melalui paparan ikon terletak di " -"bahagian kiri. Setiap pilihan mempunyai nilai default yang dipaparkan jika ia " -"tidak ditetapkan sebelumnya. Nilai default ini sepatutnya OK dalam kebanyakan " -"keadaan.

" -"
" -"

Anda boleh mengakses mesej bantuan pendek untuk setiap pilihan dengan " -"menggunakan sama ada butang '?' dalam bar tajuk, atau butang pada bahagian " -"bawah dialog ini.

" +"bahagian kiri. Setiap pilihan mempunyai nilai default yang dipaparkan jika " +"ia tidak ditetapkan sebelumnya. Nilai default ini sepatutnya OK dalam " +"kebanyakan keadaan.


Anda boleh mengakses mesej bantuan pendek " +"untuk setiap pilihan dengan menggunakan sama ada butang '?' dalam bar tajuk, " +"atau butang pada bahagian bawah dialog ini.

" #: editlist.cpp:33 msgid "Add..." @@ -568,6 +590,10 @@ msgstr "Tambah..." msgid "Edit..." msgstr "Edit..." +#: editlist.cpp:35 +msgid "Delete" +msgstr "" + #: editlist.cpp:36 msgid "Default List" msgstr "Senarai Default" @@ -688,1291 +714,1453 @@ msgstr "GB" msgid "Tiles" msgstr "Jubin" -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Server name (ServerName)\n" -#~ "

\n" -#~ "The hostname of your server, as advertised to the world.\n" -#~ "By default CUPS will use the hostname of the system.

\n" -#~ "

\n" -#~ "To set the default server used by clients, see the client.conf file.

\n" -#~ "

\n" -#~ "ex: myhost.domain.com

\n" -#~ msgstr "" -#~ "Nama pelayan (ServerName)\n" -#~ "

\n" -#~ "Namahos pelayan anda, seperti diiklankan kepada dunia.\n" -#~ "Secara default CUPS akan menggunakan namahos sistem ini.

\n" -#~ "

\n" -#~ "Untuk menetapkan pelayan default yang digunakan oleh klien, lihat fail client.conf

\n" -#~ "

\n" -#~ "contoh: myhost.domain.com

\n" - +#: cupsd.conf.template:23 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server name (ServerName)\n" +"

\n" +"The hostname of your server, as advertised to the world.\n" +"By default CUPS will use the hostname of the system.

\n" +"

\n" +"To set the default server used by clients, see the client.conf file.

\n" +"

\n" +"ex: myhost.domain.com

\n" +msgstr "" +"Nama pelayan (ServerName)\n" +"

\n" +"Namahos pelayan anda, seperti diiklankan kepada dunia.\n" +"Secara default CUPS akan menggunakan namahos sistem ini.

\n" +"

\n" +"Untuk menetapkan pelayan default yang digunakan oleh klien, lihat fail " +"client.conf

\n" +"

\n" +"contoh: myhost.domain.com

\n" + +#: cupsd.conf.template:36 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Server administrator (ServerAdmin)\n" -#~ "

\n" -#~ "The email address to send all complaints or problems to.\n" -#~ "By default CUPS will use \"root@hostname\".

\n" -#~ "

\n" -#~ "ex: root@myhost.com

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Pelayan\n" -#~ "

kepada semua atau kepada defaultroot@hostname

\n" -#~ "

\n" -#~ "root@myhost.com

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server administrator (ServerAdmin)\n" +"

\n" +"The email address to send all complaints or problems to.\n" +"By default CUPS will use \"root@hostname\".

\n" +"

\n" +"ex: root@myhost.com

\n" +msgstr "" +"Buat bukan e\n" +" Pelayan\n" +"

kepada semua atau kepada defaultroot@hostname

\n" +"

\n" +"root@myhost.com

t" +#: cupsd.conf.template:47 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Access log (AccessLog)\n" -#~ "

\n" -#~ "The access log file; if this does not start with a leading /\n" -#~ "then it is assumed to be relative to ServerRoot. By default set to\n" -#~ "\"/var/log/cups/access_log\".

\n" -#~ "

\n" -#~ "You can also use the special name syslog to send the output to the\n" -#~ "syslog file or daemon.

\n" -#~ "

\n" -#~ "ex: /var/log/cups/access_log

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " log\n" -#~ "

akses log bukan mula dengan adalah kepada kepada default kepada t log akses log

\n" -#~ "

unama kepada kepada atau

\n" -#~ "

\n" -#~ " log akses log

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Access log (AccessLog)\n" +"

\n" +"The access log file if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/access_log\".

\n" +"

\n" +"You can also use the special name syslog to send the output to the\n" +"syslog file or daemon.

\n" +"

\n" +"ex: /var/log/cups/access_log

\n" +msgstr "" +"Buat bukan e\n" +" log\n" +"

akses log bukan mula dengan adalah kepada kepada default kepada t log " +"akses log

\n" +"

unama kepada kepada atau

\n" +"

\n" +" log akses log

t" + +#: cupsd.conf.template:62 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Data directory (DataDir)\n" -#~ "

\n" -#~ "The root directory for the CUPS data files.\n" -#~ "By default /usr/share/cups.

\n" -#~ "

\n" -#~ "ex: /usr/share/cups

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Data\n" -#~ "

for fail-fail default

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Data directory (DataDir)\n" +"

\n" +"The root directory for the CUPS data files.\n" +"By default /usr/share/cups.

\n" +"

\n" +"ex: /usr/share/cups

\n" +msgstr "" +"Buat bukan e\n" +" Data\n" +"

for fail-fail default

\n" +"

\n" +"

t" +#: cupsd.conf.template:73 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Default character set (DefaultCharset)\n" -#~ "

\n" -#~ "The default character set to use. If not specified,\n" -#~ "defaults to utf-8. Note that this can also be overridden in\n" -#~ "HTML documents...

\n" -#~ "

\n" -#~ "ex: utf-8

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Default\n" -#~ "

default kepada Jika bukan kepada Nota in

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Default character set (DefaultCharset)\n" +"

\n" +"The default character set to use. If not specified,\n" +"defaults to utf-8. Note that this can also be overridden in\n" +"HTML documents...

\n" +"

\n" +"ex: utf-8

\n" +msgstr "" +"Buat bukan e\n" +" Default\n" +"

default kepada Jika bukan kepada Nota in

\n" +"

\n" +"

t" +#: cupsd.conf.template:85 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Default language (DefaultLanguage)\n" -#~ "

\n" -#~ "The default language if not specified by the browser.\n" -#~ "If not specified, the current locale is used.

\n" -#~ "

\n" -#~ "ex: en

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Default\n" -#~ "

default bukan bukan adalah

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Default language (DefaultLanguage)\n" +"

\n" +"The default language if not specified by the browser.\n" +"If not specified, the current locale is used.

\n" +"

\n" +"ex: en

\n" +msgstr "" +"Buat bukan e\n" +" Default\n" +"

default bukan bukan adalah

\n" +"

\n" +"

t" +#: cupsd.conf.template:96 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Document directory (DocumentRoot)\n" -#~ "

\n" -#~ "The root directory for HTTP documents that are served.\n" -#~ "By default the compiled-in directory.

\n" -#~ "

\n" -#~ "ex: /usr/share/cups/doc

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Dokumen\n" -#~ "

for HTTP default in

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Document directory (DocumentRoot)\n" +"

\n" +"The root directory for HTTP documents that are served.\n" +"By default the compiled-in directory.

\n" +"

\n" +"ex: /usr/share/cups/doc-root

\n" +msgstr "" +"Buat bukan e\n" +" Dokumen\n" +"

for HTTP default in

\n" +"

\n" +"

t" +#: cupsd.conf.template:107 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Error log (ErrorLog)\n" -#~ "

\n" -#~ "The error log file; if this does not start with a leading /\n" -#~ "then it is assumed to be relative to ServerRoot. By default set to\n" -#~ "\"/var/log/cups/error_log\".

\n" -#~ "

\n" -#~ "You can also use the special name syslog to send the output to the\n" -#~ "syslog file or daemon.

\n" -#~ "

\n" -#~ "ex: /var/log/cups/error_log

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Ralat log\n" -#~ "

ralat log bukan mula dengan adalah kepada kepada default kepada t log ralat log

\n" -#~ "

unama kepada kepada atau

\n" -#~ "

\n" -#~ " log ralat log

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Error log (ErrorLog)\n" +"

\n" +"The error log file if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/error_log\".

\n" +"

\n" +"You can also use the special name syslog to send the output to the\n" +"syslog file or daemon.

\n" +"

\n" +"ex: /var/log/cups/error_log

\n" +msgstr "" +"Buat bukan e\n" +" Ralat log\n" +"

ralat log bukan mula dengan adalah kepada kepada default kepada t log " +"ralat log

\n" +"

unama kepada kepada atau

\n" +"

\n" +" log ralat log

t" + +#: cupsd.conf.template:122 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Font path (FontPath)\n" -#~ "

\n" -#~ "The path to locate all font files (currently only for pstoraster).\n" -#~ "By default /usr/share/cups/fonts.

\n" -#~ "

\n" -#~ "ex: /usr/share/cups/fonts

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Font\n" -#~ "

kepada semua fail-fail for default

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Font path (FontPath)\n" +"

\n" +"The path to locate all font files (currently only for pstoraster).\n" +"By default /usr/share/cups/fonts.

\n" +"

\n" +"ex: /usr/share/cups/fonts

\n" +msgstr "" +"Buat bukan e\n" +" Font\n" +"

kepada semua fail-fail for default

\n" +"

\n" +"

t" +#: cupsd.conf.template:133 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Log level (LogLevel)\n" -#~ "

\n" -#~ "Controls the number of messages logged to the ErrorLog\n" -#~ "file and can be one of the following:

\n" -#~ "
    \n" -#~ "
  • debug2: Log everything.
    • \n" -#~ "
  • debug: Log almost everything.
    • \n" -#~ "
  • info: Log all requests and state changes.
    • \n" -#~ "
  • warn: Log errors and warnings.
    • \n" -#~ "
  • error: Log only errors.
    • \n" -#~ "
  • none: Log nothing.
    • \n" -#~ "

\n" -#~ "ex: info

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Log\n" -#~ "

nombor dari kepada dan dari

\n" -#~ "
    \n" -#~ "
  • Log
    • \n" -#~ "
  • Log
    • \n" -#~ "
  • Log semua dan Keadaan
    • \n" -#~ "
  • Log dan
    • \n" -#~ "
  • ralat Log
    • \n" -#~ "
  • tiada Log tiada apa-apa
    • \n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Log level (LogLevel)\n" +"

\n" +"Controls the number of messages logged to the ErrorLog\n" +"file and can be one of the following:

\n" +"
    \n" +"
  • debug2: Log everything.
    • \n" +"
  • debug: Log almost everything.
    • \n" +"
  • info: Log all requests and state changes.
    • \n" +"
  • warn: Log errors and warnings.
    • \n" +"
  • error: Log only errors.
    • \n" +"
  • none: Log nothing.
    • \n" +"

\n" +"ex: info

\n" +msgstr "" +"Buat bukan e\n" +" Log\n" +"

nombor dari kepada dan dari

\n" +"
    \n" +"
  • Log
    • \n" +"
  • Log
    • \n" +"
  • Log semua dan Keadaan
    • \n" +"
  • Log dan
    • \n" +"
  • ralat Log
    • \n" +"
  • tiada Log tiada apa-apa
    • \n" +"

\n" +"

t" + +#: cupsd.conf.template:151 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Max log size (MaxLogSize)\n" -#~ "

\n" -#~ "Controls the maximum size of each log file before they are\n" -#~ "rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

\n" -#~ "

\n" -#~ "ex: 1048576

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Max log saiz\n" -#~ "

saiz dari log Default kepada tetap kepada kepada log

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max log size (MaxLogSize)\n" +"

\n" +"Controls the maximum size of each log file before they are\n" +"rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

\n" +"

\n" +"ex: 1048576

\n" +msgstr "" +"Buat bukan e\n" +" Max log saiz\n" +"

saiz dari log Default kepada tetap kepada kepada log

\n" +"

\n" +"

t" +#: cupsd.conf.template:162 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Page log (PageLog)\n" -#~ "

\n" -#~ "The page log file; if this does not start with a leading /\n" -#~ "then it is assumed to be relative to ServerRoot. By default set to\n" -#~ "\"/var/log/cups/page_log\".

\n" -#~ "

\n" -#~ "You can also use the special name syslog to send the output to the\n" -#~ "syslog file or daemon.

\n" -#~ "

\n" -#~ "ex: /var/log/cups/page_log

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Halaman log\n" -#~ "

log bukan mula dengan adalah kepada kepada default kepada t log log

\n" -#~ "

unama kepada kepada atau

\n" -#~ "

\n" -#~ " log log

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Page log (PageLog)\n" +"

\n" +"The page log file if this does not start with a leading /\n" +"then it is assumed to be relative to ServerRoot. By default set to\n" +"\"/var/log/cups/page_log\".

\n" +"

\n" +"You can also use the special name syslog to send the output to the\n" +"syslog file or daemon.

\n" +"

\n" +"ex: /var/log/cups/page_log

\n" +msgstr "" +"Buat bukan e\n" +" Halaman log\n" +"

log bukan mula dengan adalah kepada kepada default kepada t log log

\n" +"

unama kepada kepada atau

\n" +"

\n" +" log log

t" + +#: cupsd.conf.template:177 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Preserve job history (PreserveJobHistory)\n" -#~ "

\n" -#~ "Whether or not to preserve the job history after a\n" -#~ "job is completed, canceled, or stopped. Default is Yes.

\n" -#~ "

\n" -#~ "ex: Yes

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

atau bukan kepada adalah selesai atau Default adalah Ya

\n" -#~ "

\n" -#~ " Ya

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Preserve job history (PreserveJobHistory)\n" +"

\n" +"Whether or not to preserve the job history after a\n" +"job is completed, canceled, or stopped. Default is Yes.

\n" +"

\n" +"ex: Yes

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

atau bukan kepada adalah selesai atau Default adalah Ya

\n" +"

\n" +" Ya

t" +#: cupsd.conf.template:188 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Preserve job files (PreserveJobFiles)\n" -#~ "

\n" -#~ "Whether or not to preserve the job files after a\n" -#~ "job is completed, canceled, or stopped. Default is No.

\n" -#~ "

\n" -#~ "ex: No

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " fail-fail\n" -#~ "

atau bukan kepada fail-fail adalah selesai atau Default adalah Tidak

\n" -#~ "

\n" -#~ " Tidak

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Preserve job files (PreserveJobFiles)\n" +"

\n" +"Whether or not to preserve the job files after a\n" +"job is completed, canceled, or stopped. Default is No.

\n" +"

\n" +"ex: No

\n" +msgstr "" +"Buat bukan e\n" +" fail-fail\n" +"

atau bukan kepada fail-fail adalah selesai atau Default adalah Tidak\n" +"

\n" +" Tidak

t" + +#: cupsd.conf.template:199 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Printcap file (Printcap)\n" -#~ "

\n" -#~ "The name of the printcap file. Default is no filename.\n" -#~ "Leave blank to disable printcap file generation.

\n" -#~ "

\n" -#~ "ex: /etc/printcap

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

unama dari Default adalah tidak namafail kepada

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Printcap file (Printcap)\n" +"

\n" +"The name of the printcap file. Default is no filename.\n" +"Leave blank to disable printcap file generation.

\n" +"

\n" +"ex: /etc/printcap

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

unama dari Default adalah tidak namafail kepada

\n" +"

\n" +"

t" +#: cupsd.conf.template:210 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Request directory (RequestRoot)\n" -#~ "

\n" -#~ "The directory where request files are stored.\n" -#~ "By default /var/spool/cups.

\n" -#~ "

\n" -#~ "ex: /var/spool/cups

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

fail-fail default

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Request directory (RequestRoot)\n" +"

\n" +"The directory where request files are stored.\n" +"By default /var/spool/cups.

\n" +"

\n" +"ex: /var/spool/cups

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

fail-fail default

\n" +"

\n" +"

t" +#: cupsd.conf.template:221 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Remote root user (RemoteRoot)\n" -#~ "

\n" -#~ "The name of the user assigned to unauthenticated accesses\n" -#~ "from remote systems. By default \"remroot\".

\n" -#~ "

\n" -#~ "ex: remroot

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Jauh\n" -#~ "

unama dari kepada default

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Remote root user (RemoteRoot)\n" +"

\n" +"The name of the user assigned to unauthenticated accesses\n" +"from remote systems. By default \"remroot\".

\n" +"

\n" +"ex: remroot

\n" +msgstr "" +"Buat bukan e\n" +" Jauh\n" +"

unama dari kepada default

\n" +"

\n" +"

t" +#: cupsd.conf.template:232 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Server binaries (ServerBin)\n" -#~ "

\n" -#~ "The root directory for the scheduler executables.\n" -#~ "By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).

\n" -#~ "

\n" -#~ "ex: /usr/lib/cups

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Pelayan\n" -#~ "

for default atau

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server binaries (ServerBin)\n" +"

\n" +"The root directory for the scheduler executables.\n" +"By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).

\n" +"

\n" +"ex: /usr/lib/cups

\n" +msgstr "" +"Buat bukan e\n" +" Pelayan\n" +"

for default atau

\n" +"

\n" +"

t" +#: cupsd.conf.template:243 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Server files (ServerRoot)\n" -#~ "

\n" -#~ "The root directory for the scheduler.\n" -#~ "By default /etc/cups.

\n" -#~ "

\n" -#~ "ex: /etc/cups

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Pelayan fail-fail\n" -#~ "

for default

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Server files (ServerRoot)\n" +"

\n" +"The root directory for the scheduler.\n" +"By default /etc/cups.

\n" +"

\n" +"ex: /etc/cups

\n" +msgstr "" +"Buat bukan e\n" +" Pelayan fail-fail\n" +"

for default

\n" +"

\n" +"

t" +#: cupsd.conf.template:254 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "User (User)\n" -#~ "

\n" -#~ "The user the server runs under. Normally this\n" -#~ "must be lp, however you can configure things for another user\n" -#~ "as needed.

\n" -#~ "

\n" -#~ "Note: the server must be run initially as root to support the\n" -#~ "default IPP port of 631. It changes users whenever an external\n" -#~ "program is run...

\n" -#~ "

\n" -#~ "ex: lp

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Pengguna Pengguna\n" -#~ "

anda for

\n" -#~ "

kepada liang dari adalah

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"User (User)\n" +"

\n" +"The user the server runs under. Normally this\n" +"must be lp, however you can configure things for another user\n" +"as needed.

\n" +"

\n" +"Note: the server must be run initially as root to support the\n" +"default IPP port of 631. It changes users whenever an external\n" +"program is run...

\n" +"

\n" +"ex: lp

\n" +msgstr "" +"Buat bukan e\n" +" Pengguna Pengguna\n" +"

anda for

\n" +"

kepada liang dari adalah

\n" +"

\n" +"

t" + +#: cupsd.conf.template:270 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Group (Group)\n" -#~ "

\n" -#~ "The group the server runs under. Normally this\n" -#~ "must be sys, however you can configure things for another\n" -#~ "group as needed.

\n" -#~ "

\n" -#~ "ex: sys

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Kumpulan Kumpulan\n" -#~ "

kumpulan anda for

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Group (Group)\n" +"

\n" +"The group the server runs under. Normally this\n" +"must be lpadmin, however you can configure things for another\n" +"group as needed.

\n" +"

\n" +"ex: lpadmin

\n" +msgstr "" +"Buat bukan e\n" +" Kumpulan Kumpulan\n" +"

kumpulan anda for

\n" +"

\n" +"

t" +#: cupsd.conf.template:282 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "RIP cache (RIPCache)\n" -#~ "

\n" -#~ "The amount of memory that each RIP should use to cache\n" -#~ "bitmaps. The value can be any real number followed by \"k\" for\n" -#~ "kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n" -#~ "(1 tile = 256x256 pixels). Defaults to \"8m\" (8 megabytes).

\n" -#~ "

\n" -#~ "ex: 8m

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

dari kepada nilai nombor for m for for atau for t piksel Default kepada

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"RIP cache (RIPCache)\n" +"

\n" +"The amount of memory that each RIP should use to cache\n" +"bitmaps. The value can be any real number followed by \"k\" for\n" +"kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n" +"(1 tile = 256x256 pixels). Defaults to \"8m\" (8 megabytes).

\n" +"

\n" +"ex: 8m

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

dari kepada nilai nombor for m for for atau for t piksel Default kepada\n" +"

\n" +"

t" + +#: cupsd.conf.template:295 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Temporary files (TempDir)\n" -#~ "

\n" -#~ "The directory to put temporary files in. This directory must be\n" -#~ "writable by the user defined above! Defaults to \"/var/spool/cups/tmp\" or\n" -#~ "the value of the TMPDIR environment variable.

\n" -#~ "

\n" -#~ "ex: /var/spool/cups/tmp

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " fail-fail\n" -#~ "

kepada fail-fail in Default kepada atau nilai dari

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Temporary files (TempDir)\n" +"

\n" +"The directory to put temporary files in. This directory must be\n" +"writable by the user defined above! Defaults to \"/var/spool/cups/tmp\" or\n" +"the value of the TMPDIR environment variable.

\n" +"

\n" +"ex: /var/spool/cups/tmp

\n" +msgstr "" +"Buat bukan e\n" +" fail-fail\n" +"

kepada fail-fail in Default kepada atau nilai dari

\n" +"

\n" +"

t" +#: cupsd.conf.template:307 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Filter limit (FilterLimit)\n" -#~ "

\n" -#~ "Sets the maximum cost of all job filters that can be run\n" -#~ "at the same time. A limit of 0 means no limit. A typical job may need\n" -#~ "a filter limit of at least 200; limits less than the minimum required\n" -#~ "by a job force a single job to be printed at any time.

\n" -#~ "

\n" -#~ "The default limit is 0 (unlimited).

\n" -#~ "

\n" -#~ "ex: 200

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Tapis\n" -#~ "

kos dari semua masa dari tidak dari kepada masa

\n" -#~ "

default adalah tanpa had

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Filter limit (FilterLimit)\n" +"

\n" +"Sets the maximum cost of all job filters that can be run\n" +"at the same time. A limit of 0 means no limit. A typical job may need\n" +"a filter limit of at least 200 limits less than the minimum required\n" +"by a job force a single job to be printed at any time.

\n" +"

\n" +"The default limit is 0 (unlimited).

\n" +"

\n" +"ex: 200

\n" +msgstr "" +"Buat bukan e\n" +" Tapis\n" +"

kos dari semua masa dari tidak dari kepada masa

\n" +"

default adalah tanpa had

\n" +"

\n" +"

t" + +#: cupsd.conf.template:322 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Listen to (Port/Listen)\n" -#~ "

\n" -#~ "Ports/addresses that are listened to. The default port 631 is reserved\n" -#~ "for the Internet Printing Protocol (IPP) and is what is used here.

\n" -#~ "

\n" -#~ "You can have multiple Port/Listen lines to listen to more than one\n" -#~ "port or address, or to restrict access.

\n" -#~ "

\n" -#~ "Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n" -#~ "for encryption. If you want to support web-based encryption you will\n" -#~ "probably need to listen on port 443 (the \"HTTPS\" port...).

\n" -#~ "

\n" -#~ "ex: 631, myhost:80, 1.2.3.4:631

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " kepada Liang\n" -#~ "

kepada default liang adalah Internet Cetakan Protokol dan adalah adalah

\n" -#~ "

Liang baris kepada kepada atau atau kepada akses

\n" -#~ "

TLS atau HTTP Jika anda kepada anda kepada on liang HTTPS liang

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Listen to (Port/Listen)\n" +"

\n" +"Ports/addresses that are listened to. The default port 631 is reserved\n" +"for the Internet Printing Protocol (IPP) and is what is used here.

\n" +"

\n" +"You can have multiple Port/Listen lines to listen to more than one\n" +"port or address, or to restrict access.

\n" +"

\n" +"Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n" +"for encryption. If you want to support web-based encryption you will\n" +"probably need to listen on port 443 (the \"HTTPS\" port...).

\n" +"

\n" +"ex: 631, myhost:80, 1.2.3.4:631

\n" +msgstr "" +"Buat bukan e\n" +" kepada Liang\n" +"

kepada default liang adalah Internet Cetakan Protokol dan adalah adalah\n" +"

Liang baris kepada kepada atau atau kepada akses

\n" +"

TLS atau HTTP Jika anda kepada anda kepada on liang HTTPS liang

\n" +"

\n" +"

t" + +#: cupsd.conf.template:348 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Hostname lookups (HostNameLookups)\n" -#~ "

\n" -#~ "Whether or not to do lookups on IP addresses to get a\n" -#~ "fully-qualified hostname. This defaults to Off for performance reasons...

\n" -#~ "

\n" -#~ "ex: On

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Namahos\n" -#~ "

atau bukan kepada on IP kepada kepada Off for

\n" -#~ "

\n" -#~ " On

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Hostname lookups (HostNameLookups)\n" +"

\n" +"Whether or not to do lookups on IP addresses to get a\n" +"fully-qualified hostname. This defaults to Off for performance reasons...\n" +"

\n" +"ex: On

\n" +msgstr "" +"Buat bukan e\n" +" Namahos\n" +"

atau bukan kepada on IP kepada kepada Off for

\n" +"

\n" +" On

t" +#: cupsd.conf.template:359 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Keep alive (KeepAlive)\n" -#~ "

\n" -#~ "Whether or not to support the Keep-Alive connection\n" -#~ "option. Default is on.

\n" -#~ "

\n" -#~ "ex: On

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Simpan\n" -#~ "

atau bukan kepada Simpan Default adalah on

\n" -#~ "

\n" -#~ " On

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Keep alive (KeepAlive)\n" +"

\n" +"Whether or not to support the Keep-Alive connection\n" +"option. Default is on.

\n" +"

\n" +"ex: On

\n" +msgstr "" +"Buat bukan e\n" +" Simpan\n" +"

atau bukan kepada Simpan Default adalah on

\n" +"

\n" +" On

t" +#: cupsd.conf.template:370 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Keep-alive timeout (KeepAliveTimeout)\n" -#~ "

\n" -#~ "The timeout (in seconds) before Keep-Alive connections are\n" -#~ "automatically closed. Default is 60 seconds.

\n" -#~ "

\n" -#~ "ex: 60

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Simpan\n" -#~ "

in saat Simpan Default adalah saat

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Keep-alive timeout (KeepAliveTimeout)\n" +"

\n" +"The timeout (in seconds) before Keep-Alive connections are\n" +"automatically closed. Default is 60 seconds.

\n" +"

\n" +"ex: 60

\n" +msgstr "" +"Buat bukan e\n" +" Simpan\n" +"

in saat Simpan Default adalah saat

\n" +"

\n" +"

t" +#: cupsd.conf.template:381 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Max clients (MaxClients)\n" -#~ "

\n" -#~ "Controls the maximum number of simultaneous clients that\n" -#~ "will be handled. Defaults to 100.

\n" -#~ "

\n" -#~ "ex: 100

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Max\n" -#~ "

nombor dari Default kepada

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max clients (MaxClients)\n" +"

\n" +"Controls the maximum number of simultaneous clients that\n" +"will be handled. Defaults to 100.

\n" +"

\n" +"ex: 100

\n" +msgstr "" +"Buat bukan e\n" +" Max\n" +"

nombor dari Default kepada

\n" +"

\n" +"

t" +#: cupsd.conf.template:392 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Max request size (MaxRequestSize)\n" -#~ "

\n" -#~ "Controls the maximum size of HTTP requests and print files.\n" -#~ "Set to 0 to disable this feature (defaults to 0).

\n" -#~ "

\n" -#~ "ex: 0

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Max saiz\n" -#~ "

saiz dari HTTP dan fail-fail kepada kepada kepada

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max request size (MaxRequestSize)\n" +"

\n" +"Controls the maximum size of HTTP requests and print files.\n" +"Set to 0 to disable this feature (defaults to 0).

\n" +"

\n" +"ex: 0

\n" +msgstr "" +"Buat bukan e\n" +" Max saiz\n" +"

saiz dari HTTP dan fail-fail kepada kepada kepada

\n" +"

\n" +"

t" +#: cupsd.conf.template:403 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Client timeout (Timeout)\n" -#~ "

\n" -#~ "The timeout (in seconds) before requests time out. Default is 300 seconds.

\n" -#~ "

\n" -#~ "ex: 300

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Klien Had masa\n" -#~ "

in saat masa keluar Default adalah saat

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Client timeout (Timeout)\n" +"

\n" +"The timeout (in seconds) before requests time out. Default is 300 seconds.\n" +"

\n" +"ex: 300

\n" +msgstr "" +"Buat bukan e\n" +" Klien Had masa\n" +"

in saat masa keluar Default adalah saat

\n" +"

\n" +"

t" +#: cupsd.conf.template:413 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Use browsing (Browsing)\n" -#~ "

\n" -#~ "Whether or not to listen to printer \n" -#~ "information from other CUPS servers. \n" -#~ "

\n" -#~ "

\n" -#~ "Enabled by default.\n" -#~ "

\n" -#~ "

\n" -#~ "Note: to enable the sending of browsing\n" -#~ "information from this CUPS server to the LAN,\n" -#~ "specify a valid BrowseAddress.\n" -#~ "

\n" -#~ "

\n" -#~ "ex: On

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Guna Layar\n" -#~ "

atau bukan kepada kepada pencetak daripada lain-lain\n" -#~ "

\n" -#~ "

default\n" -#~ "

\n" -#~ "

kepada dari daripada kepada\n" -#~ "

\n" -#~ "

\n" -#~ " On

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Use browsing (Browsing)\n" +"

\n" +"Whether or not to listen to printer \n" +"information from other CUPS servers. \n" +"

\n" +"

\n" +"Enabled by default.\n" +"

\n" +"

\n" +"Note: to enable the sending of browsing\n" +"information from this CUPS server to the LAN,\n" +"specify a valid BrowseAddress.\n" +"

\n" +"

\n" +"ex: On

\n" +msgstr "" +"Buat bukan e\n" +" Guna Layar\n" +"

atau bukan kepada kepada pencetak daripada lain-lain\n" +"

\n" +"

default\n" +"

\n" +"

kepada dari daripada kepada\n" +"

\n" +"

\n" +" On

t" + +#: cupsd.conf.template:433 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Use short names (BrowseShortNames)\n" -#~ "

\n" -#~ "Whether or not to use \"short\" names for remote printers\n" -#~ "when possible (e.g. \"printer\" instead of \"printer@host\"). Enabled by\n" -#~ "default.

\n" -#~ "

\n" -#~ "ex: Yes

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Guna\n" -#~ "

atau bukan kepada for e pencetak dariprinter@host Hidupkan

\n" -#~ "

\n" -#~ " Ya

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Use short names (BrowseShortNames)\n" +"

\n" +"Whether or not to use \"short\" names for remote printers\n" +"when possible (e.g. \"printer\" instead of \"printer@host\"). Enabled by\n" +"default.

\n" +"

\n" +"ex: Yes

\n" +msgstr "" +"Buat bukan e\n" +" Guna\n" +"

atau bukan kepada for e pencetak dariprinter@host Hidupkan

\n" +"

\n" +" Ya

t" +#: cupsd.conf.template:445 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse addresses (BrowseAddress)\n" -#~ "

\n" -#~ "Specifies a broadcast address to be used. By\n" -#~ "default browsing information is broadcast to all active interfaces.

\n" -#~ "

\n" -#~ "Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n" -#~ "you have a Class A, B, C, or D netmask (i.e. no CIDR support).

\n" -#~ "

\n" -#~ "ex: x.y.z.255, x.y.255.255

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

kepada adalah kepada semua aktif

\n" -#~ "

dan bukan Kelas B C atau D e tidak

\n" -#~ "

\n" -#~ " x y x y

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse addresses (BrowseAddress)\n" +"

\n" +"Specifies a broadcast address to be used. By\n" +"default browsing information is broadcast to all active interfaces.

\n" +"

\n" +"Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n" +"you have a Class A, B, C, or D netmask (i.e. no CIDR support).

\n" +"

\n" +"ex: x.y.z.255, x.y.255.255

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

kepada adalah kepada semua aktif

\n" +"

dan bukan Kelas B C atau D e tidak

\n" +"

\n" +" x y x y

t" + +#: cupsd.conf.template:461 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse allow/deny (BrowseAllow/BrowseDeny)\n" -#~ "

\n" -#~ "BrowseAllow: specifies an address mask to allow for incoming browser\n" -#~ "packets. The default is to allow packets from all addresses.

\n" -#~ "

\n" -#~ "BrowseDeny: specifies an address mask to deny for incoming browser\n" -#~ "packets. The default is to deny packets from no addresses.

\n" -#~ "

\n" -#~ "Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n" -#~ "addresses:

\n" -#~ "
\n"
-#~ "All\n"
-#~ "None\n"
-#~ "*.domain.com\n"
-#~ ".domain.com\n"
-#~ "host.domain.com\n"
-#~ "nnn.*\n"
-#~ "nnn.nnn.*\n"
-#~ "nnn.nnn.nnn.*\n"
-#~ "nnn.nnn.nnn.nnn\n"
-#~ "nnn.nnn.nnn.nnn/mm\n"
-#~ "nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-#~ "

\n" -#~ "The hostname/domainname restrictions only work if you have turned hostname\n" -#~ "lookups on!

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

\n" -#~ " kepada for default adalah kepada daripada semua

\n" -#~ "

\n" -#~ " kepada for default adalah kepada daripada tidak

\n" -#~ "

dan for

\n" -#~ "
 t t mm\n"
-#~ "

anda on

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse allow/deny (BrowseAllow/BrowseDeny)\n" +"

\n" +"BrowseAllow: specifies an address mask to allow for incoming browser\n" +"packets. The default is to allow packets from all addresses.

\n" +"

\n" +"BrowseDeny: specifies an address mask to deny for incoming browser\n" +"packets. The default is to deny packets from no addresses.

\n" +"

\n" +"Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n" +"addresses:

\n" +"
\n"
+"All\n"
+"None\n"
+"*.domain.com\n"
+".domain.com\n"
+"host.domain.com\n"
+"nnn.*\n"
+"nnn.nnn.*\n"
+"nnn.nnn.nnn.*\n"
+"nnn.nnn.nnn.nnn\n"
+"nnn.nnn.nnn.nnn/mm\n"
+"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
+"

\n" +"The hostname/domainname restrictions only work if you have turned hostname\n" +"lookups on!

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

\n" +" kepada for default adalah kepada daripada semua

\n" +"

\n" +" kepada for default adalah kepada daripada tidak

\n" +"

dan for

\n" +"
 t t mm\n"
+"

anda on

t" + +#: cupsd.conf.template:492 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse interval (BrowseInterval)\n" -#~ "

\n" -#~ "The time between browsing updates in seconds. Default\n" -#~ "is 30 seconds.

\n" -#~ "

\n" -#~ "Note that browsing information is sent whenever a printer's state changes\n" -#~ "as well, so this represents the maximum time between updates.

\n" -#~ "

\n" -#~ "Set this to 0 to disable outgoing broadcasts so your local printers are\n" -#~ "not advertised but you can still see printers on other hosts.

\n" -#~ "

\n" -#~ "ex: 30

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

masa in saat Default saat

\n" -#~ "

adalah pencetak s Keadaan masa

\n" -#~ "

kepada kepada lokal anda on lain-lain

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse interval (BrowseInterval)\n" +"

\n" +"The time between browsing updates in seconds. Default\n" +"is 30 seconds.

\n" +"

\n" +"Note that browsing information is sent whenever a printer's state changes\n" +"as well, so this represents the maximum time between updates.

\n" +"

\n" +"Set this to 0 to disable outgoing broadcasts so your local printers are\n" +"not advertised but you can still see printers on other hosts.

\n" +"

\n" +"ex: 30

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

masa in saat Default saat

\n" +"

adalah pencetak s Keadaan masa

\n" +"

kepada kepada lokal anda on lain-lain

\n" +"

\n" +"

t" + +#: cupsd.conf.template:509 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse order (BrowseOrder)\n" -#~ "

\n" -#~ "Specifies the order of BrowseAllow/BrowseDeny comparisons.

\n" -#~ "

\n" -#~ "ex: allow,deny

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

dari

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse order (BrowseOrder)\n" +"

\n" +"Specifies the order of BrowseAllow/BrowseDeny comparisons.

\n" +"

\n" +"ex: allow,deny

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

dari

\n" +"

\n" +"

t" +#: cupsd.conf.template:520 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse poll (BrowsePoll)\n" -#~ "

\n" -#~ "Poll the named server(s) for printers.

\n" -#~ "

\n" -#~ "ex: myhost:631

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

s for

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse poll (BrowsePoll)\n" +"

\n" +"Poll the named server(s) for printers.

\n" +"

\n" +"ex: myhost:631

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

s for

\n" +"

\n" +"

t" +#: cupsd.conf.template:530 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse port (BrowsePort)\n" -#~ "

\n" -#~ "The port used for UDP broadcasts. By default this is\n" -#~ "the IPP port; if you change this you need to do it on all servers.\n" -#~ "Only one BrowsePort is recognized.

\n" -#~ "

\n" -#~ "ex: 631

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur liang\n" -#~ "

liang for default adalah liang anda anda kepada on semua adalah

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse port (BrowsePort)\n" +"

\n" +"The port used for UDP broadcasts. By default this is\n" +"the IPP port if you change this you need to do it on all servers.\n" +"Only one BrowsePort is recognized.

\n" +"

\n" +"ex: 631

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur liang\n" +"

liang for default adalah liang anda anda kepada on semua adalah

\n" +"

\n" +"

t" +#: cupsd.conf.template:542 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse relay (BrowseRelay)\n" -#~ "

\n" -#~ "Relay browser packets from one address/network to another.

\n" -#~ "

\n" -#~ "ex: src-address dest-address

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

daripada kepada

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse relay (BrowseRelay)\n" +"

\n" +"Relay browser packets from one address/network to another.

\n" +"

\n" +"ex: src-address dest-address

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

daripada kepada

\n" +"

\n" +"

t" +#: cupsd.conf.template:552 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse timeout (BrowseTimeout)\n" -#~ "

\n" -#~ "The timeout (in seconds) for network printers - if we don't\n" -#~ "get an update within this time the printer will be removed\n" -#~ "from the printer list. This number definitely should not be\n" -#~ "less the BrowseInterval value for obvious reasons. Defaults\n" -#~ "to 300 seconds.

\n" -#~ "

\n" -#~ "ex: 300

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

in saat for masa pencetak pencetak nombor bukan nilai for Default saat

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse timeout (BrowseTimeout)\n" +"

\n" +"The timeout (in seconds) for network printers - if we don't\n" +"get an update within this time the printer will be removed\n" +"from the printer list. This number definitely should not be\n" +"less the BrowseInterval value for obvious reasons. Defaults\n" +"to 300 seconds.

\n" +"

\n" +"ex: 300

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

in saat for masa pencetak pencetak nombor bukan nilai for Default saat\n" +"

\n" +"

t" + +#: cupsd.conf.template:566 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Implicit classes (ImplicitClasses)\n" -#~ "

\n" -#~ "Whether or not to use implicit classes.

\n" -#~ "

\n" -#~ "Printer classes can be specified explicitly in the classes.conf\n" -#~ "file, implicitly based upon the printers available on the LAN, or\n" -#~ "both.

\n" -#~ "

\n" -#~ "When ImplicitClasses is On, printers on the LAN with the same name\n" -#~ "(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n" -#~ "name. This allows you to setup multiple redundant queues on a LAN\n" -#~ "without a lot of administrative difficulties. If a user sends a\n" -#~ "job to Acme-LaserPrint-1000, the job will go to the first available\n" -#~ "queue.

\n" -#~ "

\n" -#~ "Enabled by default.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Implisit\n" -#~ "

atau bukan kepada

\n" -#~ "

in on atau

\n" -#~ "

adalah On on dengan unama t e dengan anda kepada on dari Jika kepada kepada

\n" -#~ "

default

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Implicit classes (ImplicitClasses)\n" +"

\n" +"Whether or not to use implicit classes.

\n" +"

\n" +"Printer classes can be specified explicitly in the classes.conf\n" +"file, implicitly based upon the printers available on the LAN, or\n" +"both.

\n" +"

\n" +"When ImplicitClasses is On, printers on the LAN with the same name\n" +"(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n" +"name. This allows you to setup multiple redundant queues on a LAN\n" +"without a lot of administrative difficulties. If a user sends a\n" +"job to Acme-LaserPrint-1000, the job will go to the first available\n" +"queue.

\n" +"

\n" +"Enabled by default.

\n" +msgstr "" +"Buat bukan e\n" +" Implisit\n" +"

atau bukan kepada

\n" +"

in on atau

\n" +"

adalah On on dengan unama t e dengan anda kepada on dari Jika kepada " +"kepada

\n" +"

default

t" + +#: cupsd.conf.template:587 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "System group (SystemGroup)\n" -#~ "

\n" -#~ "The group name for \"System\" (printer administration)\n" -#~ "access. The default varies depending on the operating system, but\n" -#~ "will be sys, system, or root (checked for in that order).

\n" -#~ "

\n" -#~ "ex: sys

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Sistem kumpulan\n" -#~ "

kumpulan unama for Sistem pencetak default on sistem sistem atau for in

\n" -#~ "

\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"System group (SystemGroup)\n" +"

\n" +"The group name for \"System\" (printer administration)\n" +"access. The default varies depending on the operating system, but\n" +"will be sys, system, or root (checked for in that " +"order).

\n" +"

\n" +"ex: lpadmin

\n" +msgstr "" +"Buat bukan e\n" +" Sistem kumpulan\n" +"

kumpulan unama for Sistem pencetak default on sistem sistem atau for in

\n" +"

\n" +"

t" + +#: cupsd.conf.template:599 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Encryption certificate (ServerCertificate)\n" -#~ "

\n" -#~ "The file to read containing the server's certificate.\n" -#~ "Defaults to \"/etc/cups/ssl/server.crt\".

\n" -#~ "

\n" -#~ "ex: /etc/cups/ssl/server.crt

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

kepada s kepada

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Encryption certificate (ServerCertificate)\n" +"

\n" +"The file to read containing the server's certificate.\n" +"Defaults to \"/etc/cups/ssl/server.crt\".

\n" +"

\n" +"ex: /etc/cups/ssl/server.crt

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

kepada s kepada

\n" +"

\n" +"

t" +#: cupsd.conf.template:610 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Encryption key (ServerKey)\n" -#~ "

\n" -#~ "The file to read containing the server's key.\n" -#~ "Defaults to \"/etc/cups/ssl/server.key\".

\n" -#~ "

\n" -#~ "ex: /etc/cups/ssl/server.key

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

kepada s kepada

\n" -#~ "

\n" -#~ "

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Encryption key (ServerKey)\n" +"

\n" +"The file to read containing the server's key.\n" +"Defaults to \"/etc/cups/ssl/server.key\".

\n" +"

\n" +"ex: /etc/cups/ssl/server.key

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

kepada s kepada

\n" +"

\n" +"

t" +#: cupsd.conf.template:621 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Access permissions\n" -#~ "# Access permissions for each directory served by the scheduler.\n" -#~ "Locations are relative to DocumentRoot...\n" -#~ "# AuthType: the authorization to use:\n" -#~ "# None - Perform no authentication\n" -#~ "Basic - Perform authentication using the HTTP Basic method.\n" -#~ "Digest - Perform authentication using the HTTP Digest method.\n" -#~ "# (Note: local certificate authentication can be substituted by\n" -#~ "the client for Basic or Digest when connecting to the\n" -#~ "localhost interface)\n" -#~ "# AuthClass: the authorization class; currently only Anonymous, User,\n" -#~ "System (valid user belonging to group SystemGroup), and Group\n" -#~ "(valid user belonging to the specified group) are supported.\n" -#~ "# AuthGroupName: the group name for \"Group\" authorization.\n" -#~ "# Order: the order of Allow/Deny processing.\n" -#~ "# Allow: allows access from the specified hostname, domain, IP address, or\n" -#~ "network.\n" -#~ "# Deny: denies access from the specified hostname, domain, IP address, or\n" -#~ "network.\n" -#~ "# Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n" -#~ "# All\n" -#~ "None\n" -#~ "*.domain.com\n" -#~ ".domain.com\n" -#~ "host.domain.com\n" -#~ "nnn.*\n" -#~ "nnn.nnn.*\n" -#~ "nnn.nnn.nnn.*\n" -#~ "nnn.nnn.nnn.nnn\n" -#~ "nnn.nnn.nnn.nnn/mm\n" -#~ "nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" -#~ "# The host and domain address require that you enable hostname lookups\n" -#~ "with \"HostNameLookups On\" above.\n" -#~ "# Encryption: whether or not to use encryption; this depends on having\n" -#~ "the OpenSSL library linked into the CUPS library and scheduler.\n" -#~ "# Possible values:\n" -#~ "# Always - Always use encryption (SSL)\n" -#~ "Never - Never use encryption\n" -#~ "Required - Use TLS encryption upgrade\n" -#~ "IfRequested - Use encryption if the server requests it\n" -#~ "# The default value is \"IfRequested\".\n" -#~ msgstr "Buat bukan e keizinan t keizinan for kepada t kepada t Tiada tidak HTTP Asas HTTP t Nota lokal for Asas atau kepada t Anonymous Pengguna kepada kumpulan dan Kumpulan t kepada kumpulan t kumpulan unama for Kumpulan t Susunan dari Benarkan Halang t Benarkan akses daripada IP atau t Halang akses daripada IP atau t Kedua-dua Benarkan dan Halang for t Semua t t mm t dan anda On t atau bukan kepada bergantung on OpenSSL dan t t Sentiasa Sentiasa SSL Tidak sekali Guna TLS Guna t default nilai adalah t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Access permissions\n" +"Access permissions for each directory served by the scheduler.\n" +"Locations are relative to DocumentRoot...\n" +"AuthType: the authorization to use:\n" +"None - Perform no authentication\n" +"Basic - Perform authentication using the HTTP Basic method.\n" +"Digest - Perform authentication using the HTTP Digest method.\n" +"(Note: local certificate authentication can be substituted by\n" +"the client for Basic or Digest when connecting to the\n" +"localhost interface)\n" +"AuthClass: the authorization class currently only Anonymous, User,\n" +"System (valid user belonging to group SystemGroup), and Group\n" +"(valid user belonging to the specified group) are supported.\n" +"AuthGroupName: the group name for \"Group\" authorization.\n" +"Order: the order of Allow/Deny processing.\n" +"Allow: allows access from the specified hostname, domain, IP address, or\n" +"network.\n" +"Deny: denies access from the specified hostname, domain, IP address, or\n" +"network.\n" +"Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n" +"All\n" +"None\n" +"*.domain.com\n" +".domain.com\n" +"host.domain.com\n" +"nnn.*\n" +"nnn.nnn.*\n" +"nnn.nnn.nnn.*\n" +"nnn.nnn.nnn.nnn\n" +"nnn.nnn.nnn.nnn/mm\n" +"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.\n" +"Encryption: whether or not to use encryption this depends on having\n" +"the OpenSSL library linked into the CUPS library and scheduler.\n" +"Possible values:\n" +"Always - Always use encryption (SSL)\n" +"Never - Never use encryption\n" +"Required - Use TLS encryption upgrade\n" +"IfRequested - Use encryption if the server requests it\n" +"The default value is \"IfRequested\".\n" +msgstr "" +"Buat bukan e keizinan t keizinan for kepada t kepada t Tiada tidak HTTP Asas " +"HTTP t Nota lokal for Asas atau kepada t Anonymous Pengguna kepada kumpulan " +"dan Kumpulan t kepada kumpulan t kumpulan unama for Kumpulan t Susunan dari " +"Benarkan Halang t Benarkan akses daripada IP atau t Halang akses daripada IP " +"atau t Kedua-dua Benarkan dan Halang for t Semua t t mm t dan anda On t atau " +"bukan kepada bergantung on OpenSSL dan t t Sentiasa Sentiasa SSL Tidak " +"sekali Guna TLS Guna t default nilai adalah t" + +#: cupsd.conf.template:707 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Authentication (AuthType)\n" -#~ "

\n" -#~ "The authorization to use:

\n" -#~ "

    \n" -#~ "
  • None - Perform no authentication.
    • \n" -#~ "
  • Basic - Perform authentication using the HTTP Basic method.
    • \n" -#~ "
  • Digest - Perform authentication using the HTTP Digest method.
    • \n" -#~ "

\n" -#~ "Note: local certificate authentication can be substituted by\n" -#~ "the client for Basic or Digest when connecting to the\n" -#~ "localhost interface.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Autentikasi\n" -#~ "

kepada

\n" -#~ "

    \n" -#~ "
  • Tiada tidak
    • \n" -#~ "
  • Asas HTTP Asas
    • \n" -#~ "
  • HTTP
    • \n" -#~ "

lokal for Asas atau kepada

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Authentication (AuthType)\n" +"

\n" +"The authorization to use:

\n" +"

    \n" +"
  • None - Perform no authentication.
    • \n" +"
  • Basic - Perform authentication using the HTTP Basic method.\n" +"
  • Digest - Perform authentication using the HTTP Digest method.\n" +"

\n" +"Note: local certificate authentication can be substituted by\n" +"the client for Basic or Digest when connecting to the\n" +"localhost interface.

\n" +msgstr "" +"Buat bukan e\n" +" Autentikasi\n" +"

kepada

\n" +"

    \n" +"
  • Tiada tidak
    • \n" +"
  • Asas HTTP Asas
    • \n" +"
  • HTTP
    • \n" +"

lokal for Asas atau kepada

t" + +#: cupsd.conf.template:721 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Class (AuthClass)\n" -#~ "

\n" -#~ "The authorization class; currently only Anonymous, User,\n" -#~ "System (valid user belonging to group SystemGroup), and Group\n" -#~ "(valid user belonging to the specified group) are supported.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Kelas\n" -#~ "

Anonymous Pengguna\n" -#~ " Sistem kepada kumpulan dan Kumpulan t kepada kumpulan

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Class (AuthClass)\n" +"

\n" +"The authorization class currently only Anonymous, User,\n" +"System (valid user belonging to group SystemGroup), and Group\n" +"(valid user belonging to the specified group) are supported.

\n" +msgstr "" +"Buat bukan e\n" +" Kelas\n" +"

Anonymous Pengguna\n" +" Sistem kepada kumpulan dan Kumpulan t kepada kumpulan

t" +#: cupsd.conf.template:729 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "

The user/group names allowed to access the resource. The format is a\n" -#~ "comma separated list.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "

kumpulan kepada akses adalah

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"

The user/group names allowed to access the resource. The format is a\n" +"comma separated list.

\n" +msgstr "" +"Buat bukan e\n" +"

kumpulan kepada akses adalah

t" +#: cupsd.conf.template:734 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Satisfy (Satisfy)\n" -#~ "

\n" -#~ "This directive controls whether all specified conditions must\n" -#~ "be satisfied to allow access to the resource. If set to \"all\",\n" -#~ "then all authentication and access control conditions must be\n" -#~ "satisfied to allow access.\n" -#~ "

\n" -#~ "

\n" -#~ "Setting Satisfy to \"any\" allows a user to gain access if the\n" -#~ "authentication or access control requirements are satisfied.\n" -#~ "For example, you might require authentication for remote access,\n" -#~ "but allow local access without authentication.\n" -#~ "

\n" -#~ "

\n" -#~ "The default is \"all\".\n" -#~ "

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

semua kepada akses kepada Jika kepada semua semua dan akses kepada akses\n" -#~ "

\n" -#~ "

kepada kepada akses atau akses anda for akses lokal akses\n" -#~ "

\n" -#~ "

default adalah semua\n" -#~ "

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Satisfy (Satisfy)\n" +"

\n" +"This directive controls whether all specified conditions must\n" +"be satisfied to allow access to the resource. If set to \"all\",\n" +"then all authentication and access control conditions must be\n" +"satisfied to allow access.\n" +"

\n" +"

\n" +"Setting Satisfy to \"any\" allows a user to gain access if the\n" +"authentication or access control requirements are satisfied.\n" +"For example, you might require authentication for remote access,\n" +"but allow local access without authentication.\n" +"

\n" +"

\n" +"The default is \"all\".\n" +"

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

semua kepada akses kepada Jika kepada semua semua dan akses kepada " +"akses\n" +"

\n" +"

kepada kepada akses atau akses anda for akses lokal akses\n" +"

\n" +"

default adalah semua\n" +"

t" + +#: cupsd.conf.template:753 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Authentication group name (AuthGroupName)\n" -#~ "

\n" -#~ "The group name for Group authorization.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Autentikasi kumpulan unama\n" -#~ "

kumpulan unama for Kumpulan

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Authentication group name (AuthGroupName)\n" +"

\n" +"The group name for Group authorization.

\n" +msgstr "" +"Buat bukan e\n" +" Autentikasi kumpulan unama\n" +"

kumpulan unama for Kumpulan

t" +#: cupsd.conf.template:759 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "ACL order (Order)\n" -#~ "

\n" -#~ "The order of Allow/Deny processing.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Susunan\n" -#~ "

dari Benarkan Halang

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"ACL order (Order)\n" +"

\n" +"The order of Allow/Deny processing.

\n" +msgstr "" +"Buat bukan e\n" +" Susunan\n" +"

dari Benarkan Halang

t" +#: cupsd.conf.template:765 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Allow\n" -#~ "

\n" -#~ "Allows access from the specified hostname, domain, IP address, or\n" -#~ "network. Possible values are:

\n" -#~ "
\n"
-#~ "All\n"
-#~ "None\n"
-#~ "*.domain.com\n"
-#~ ".domain.com\n"
-#~ "host.domain.com\n"
-#~ "nnn.*\n"
-#~ "nnn.nnn.*\n"
-#~ "nnn.nnn.nnn.*\n"
-#~ "nnn.nnn.nnn.nnn\n"
-#~ "nnn.nnn.nnn.nnn/mm\n"
-#~ "nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-#~ "

\n" -#~ "The host and domain address require that you enable hostname lookups\n" -#~ "with \"HostNameLookups On\" above.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Benarkan\n" -#~ "

akses daripada IP atau

\n" -#~ "
 t t mm\n"
-#~ "

dan anda On

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Allow\n" +"

\n" +"Allows access from the specified hostname, domain, IP address, or\n" +"network. Possible values are:

\n" +"
\n"
+"All\n"
+"None\n"
+"*.domain.com\n"
+".domain.com\n"
+"host.domain.com\n"
+"nnn.*\n"
+"nnn.nnn.*\n"
+"nnn.nnn.nnn.*\n"
+"nnn.nnn.nnn.nnn\n"
+"nnn.nnn.nnn.nnn/mm\n"
+"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
+"

\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.

\n" +msgstr "" +"Buat bukan e\n" +" Benarkan\n" +"

akses daripada IP atau

\n" +"
 t t mm\n"
+"

dan anda On

t" +#: cupsd.conf.template:787 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "ACL addresses (Allow/Deny)\n" -#~ "

\n" -#~ "Allows/Denies access from the specified hostname, domain, IP address, or\n" -#~ "network. Possible values are:

\n" -#~ "
\n"
-#~ "All\n"
-#~ "None\n"
-#~ "*.domain.com\n"
-#~ ".domain.com\n"
-#~ "host.domain.com\n"
-#~ "nnn.*\n"
-#~ "nnn.nnn.*\n"
-#~ "nnn.nnn.nnn.*\n"
-#~ "nnn.nnn.nnn.nnn\n"
-#~ "nnn.nnn.nnn.nnn/mm\n"
-#~ "nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
-#~ "

\n" -#~ "The host and domain address require that you enable hostname lookups\n" -#~ "with \"HostNameLookups On\" above.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Benarkan Halang\n" -#~ "

akses daripada IP atau

\n" -#~ "
 t t mm\n"
-#~ "

dan anda On

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"ACL addresses (Allow/Deny)\n" +"

\n" +"Allows/Denies access from the specified hostname, domain, IP address, or\n" +"network. Possible values are:

\n" +"
\n"
+"All\n"
+"None\n"
+"*.domain.com\n"
+".domain.com\n"
+"host.domain.com\n"
+"nnn.*\n"
+"nnn.nnn.*\n"
+"nnn.nnn.nnn.*\n"
+"nnn.nnn.nnn.nnn\n"
+"nnn.nnn.nnn.nnn/mm\n"
+"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
+"

\n" +"The host and domain address require that you enable hostname lookups\n" +"with \"HostNameLookups On\" above.

\n" +msgstr "" +"Buat bukan e\n" +" Benarkan Halang\n" +"

akses daripada IP atau

\n" +"
 t t mm\n"
+"

dan anda On

t" +#: cupsd.conf.template:809 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Encryption (Encryption)\n" -#~ "

\n" -#~ "Whether or not to use encryption; this depends on having\n" -#~ "the OpenSSL library linked into the CUPS library and scheduler.

\n" -#~ "

\n" -#~ "Possible values:

\n" -#~ "
    \n" -#~ "
  • Always - Always use encryption (SSL)
    • \n" -#~ "
  • Never - Never use encryption
    • \n" -#~ "
  • Required - Use TLS encryption upgrade
    • \n" -#~ "
  • IfRequested - Use encryption if the server requests it
    • \n" -#~ "

\n" -#~ "The default value is \"IfRequested\".

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ "\n" -#~ "

atau bukan kepada bergantung on OpenSSL dan

\n" -#~ "

\n" -#~ "
    \n" -#~ "
  • Sentiasa Sentiasa SSL
    • \n" -#~ "
  • Tidak sekali Tidak sekali
    • \n" -#~ "
  • Dikehendaki Guna TLS
    • \n" -#~ "
  • Guna
    • \n" -#~ "

default nilai adalah

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Encryption (Encryption)\n" +"

\n" +"Whether or not to use encryption this depends on having\n" +"the OpenSSL library linked into the CUPS library and scheduler.

\n" +"

\n" +"Possible values:

\n" +"
    \n" +"
  • Always - Always use encryption (SSL)
    • \n" +"
  • Never - Never use encryption
    • \n" +"
  • Required - Use TLS encryption upgrade
    • \n" +"
  • IfRequested - Use encryption if the server requests it
    • \n" +"

\n" +"The default value is \"IfRequested\".

\n" +msgstr "" +"Buat bukan e\n" +"\n" +"

atau bukan kepada bergantung on OpenSSL dan

\n" +"

\n" +"
    \n" +"
  • Sentiasa Sentiasa SSL
    • \n" +"
  • Tidak sekali Tidak sekali
    • \n" +"
  • Dikehendaki Guna TLS
    • \n" +"
  • Guna
    • \n" +"

default nilai adalah

t" + +#: cupsd.conf.template:825 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Access permissions\n" -#~ "

\n" -#~ "Access permissions for each directory served by the scheduler.\n" -#~ "Locations are relative to DocumentRoot...

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " keizinan\n" -#~ "

keizinan for kepada

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Access permissions\n" +"

\n" +"Access permissions for each directory served by the scheduler.\n" +"Locations are relative to DocumentRoot...

\n" +msgstr "" +"Buat bukan e\n" +" keizinan\n" +"

keizinan for kepada

t" +#: cupsd.conf.template:832 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Auto purge jobs (AutoPurgeJobs)\n" -#~ "

\n" -#~ "Automatically purge jobs when not needed for quotas.\n" -#~ "Default is No.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Auto\n" -#~ "

bukan for adalah Tidak

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Auto purge jobs (AutoPurgeJobs)\n" +"

\n" +"Automatically purge jobs when not needed for quotas.\n" +"Default is No.

\n" +msgstr "" +"Buat bukan e\n" +" Auto\n" +"

bukan for adalah Tidak

t" +#: cupsd.conf.template:841 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Browse protocols (BrowseProtocols)\n" -#~ "

\n" -#~ "Which protocols to use for browsing. Can be\n" -#~ "any of the following separated by whitespace and/or commas:

\n" -#~ "
    \n" -#~ "
  • all - Use all supported protocols.
    • \n" -#~ "
  • cups - Use the CUPS browse protocol.
    • \n" -#~ "
  • slp - Use the SLPv2 protocol.
    • \n" -#~ "

\n" -#~ "The default is cups.

\n" -#~ "

\n" -#~ "Note: If you choose to use SLPv2, it is strongly recommended that\n" -#~ "you have at least one SLP Directory Agent (DA) on your\n" -#~ "network. Otherwise, browse updates can take several seconds,\n" -#~ "during which the scheduler will not response to client\n" -#~ "requests.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Lungsur\n" -#~ "

kepada for dari dan atau

\n" -#~ "
    \n" -#~ "
  • semua Guna semua
    • \n" -#~ "
  • Guna
    • \n" -#~ "
  • Guna
    • \n" -#~ "

default adalah

\n" -#~ "

Jika anda kepada adalah Direktori on saat bukan kepada

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Browse protocols (BrowseProtocols)\n" +"

\n" +"Which protocols to use for browsing. Can be\n" +"any of the following separated by whitespace and/or commas:

\n" +"
    \n" +"
  • all - Use all supported protocols.
    • \n" +"
  • cups - Use the CUPS browse protocol.
    • \n" +"
  • slp - Use the SLPv2 protocol.
    • \n" +"

\n" +"The default is cups.

\n" +"

\n" +"Note: If you choose to use SLPv2, it is strongly recommended that\n" +"you have at least one SLP Directory Agent (DA) on your\n" +"network. Otherwise, browse updates can take several seconds,\n" +"during which the scheduler will not response to client\n" +"requests.

\n" +msgstr "" +"Buat bukan e\n" +" Lungsur\n" +"

kepada for dari dan atau

\n" +"
    \n" +"
  • semua Guna semua
    • \n" +"
  • Guna
    • \n" +"
  • Guna
    • \n" +"

default adalah

\n" +"

Jika anda kepada adalah Direktori on saat bukan kepada

t" + +#: cupsd.conf.template:862 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Classification (Classification)\n" -#~ "

\n" -#~ "The classification level of the server. If set, this\n" -#~ "classification is displayed on all pages, and raw printing is disabled.\n" -#~ "The default is the empty string.

\n" -#~ "

\n" -#~ "ex: confidential\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Klasifikasi Klasifikasi\n" -#~ "

dari Jika adalah on semua laman dan adalah dimatikan default adalah kosong

\n" -#~ "

\n" -#~ " t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Classification (Classification)\n" +"

\n" +"The classification level of the server. If set, this\n" +"classification is displayed on all pages, and raw printing is disabled.\n" +"The default is the empty string.

\n" +"

\n" +"ex: confidential\n" +msgstr "" +"Buat bukan e\n" +" Klasifikasi Klasifikasi\n" +"

dari Jika adalah on semua laman dan adalah dimatikan default adalah " +"kosong

\n" +"

\n" +" t" + +#: cupsd.conf.template:874 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Allow overrides (ClassifyOverride)\n" -#~ "

\n" -#~ "Whether to allow users to override the classification\n" -#~ "on printouts. If enabled, users can limit banner pages to before or\n" -#~ "after the job, and can change the classification of a job, but cannot\n" -#~ "completely eliminate the classification or banners.

\n" -#~ "

\n" -#~ "The default is off.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Benarkan\n" -#~ "

kepada kepada Jika dibolehkan laman kepada atau dan dari atau

\n" -#~ "

default adalah off

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Allow overrides (ClassifyOverride)\n" +"

\n" +"Whether to allow users to override the classification\n" +"on printouts. If enabled, users can limit banner pages to before or\n" +"after the job, and can change the classification of a job, but cannot\n" +"completely eliminate the classification or banners.

\n" +"

\n" +"The default is off.

\n" +msgstr "" +"Buat bukan e\n" +" Benarkan\n" +"

kepada kepada Jika dibolehkan laman kepada atau dan dari atau

\n" +"

default adalah off

t" +#: cupsd.conf.template:887 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Hide implicit members (HideImplicitMembers)\n" -#~ "

\n" -#~ "Whether or not to show the members of an\n" -#~ "implicit class.

\n" -#~ "

\n" -#~ "When HideImplicitMembers is On, any remote printers that are\n" -#~ "part of an implicit class are hidden from the user, who will\n" -#~ "then only see a single queue even though many queues will be\n" -#~ "supporting the implicit class.

\n" -#~ "

\n" -#~ "Enabled by default.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Sorok\n" -#~ "

atau bukan kepada dari

\n" -#~ "

adalah On dari daripada

\n" -#~ "

default

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Hide implicit members (HideImplicitMembers)\n" +"

\n" +"Whether or not to show the members of an\n" +"implicit class.

\n" +"

\n" +"When HideImplicitMembers is On, any remote printers that are\n" +"part of an implicit class are hidden from the user, who will\n" +"then only see a single queue even though many queues will be\n" +"supporting the implicit class.

\n" +"

\n" +"Enabled by default.

\n" +msgstr "" +"Buat bukan e\n" +" Sorok\n" +"

atau bukan kepada dari

\n" +"

adalah On dari daripada

\n" +"

default

t" +#: cupsd.conf.template:903 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Use "any" classes (ImplicitAnyClasses)\n" -#~ "

\n" -#~ "Whether or not to create AnyPrinter implicit\n" -#~ "classes.

\n" -#~ "

\n" -#~ "When ImplicitAnyClasses is On and a local queue of the same name\n" -#~ "exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n" -#~ "an implicit class called \"Anyprinter\" is created instead.

\n" -#~ "

\n" -#~ "When ImplicitAnyClasses is Off, implicit classes are not created\n" -#~ "when there is a local queue of the same name.

\n" -#~ "

\n" -#~ "Disabled by default.

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Guna""\n" -#~ "

atau bukan kepada cipta

\n" -#~ "

adalah On dan lokal dari unama e pencetakprinter@server1printer@server1 adalah

\n" -#~ "

adalah Off bukan adalah lokal dari unama

\n" -#~ "

default

t" - +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Use "any" classes (ImplicitAnyClasses)\n" +"

\n" +"Whether or not to create AnyPrinter implicit\n" +"classes.

\n" +"

\n" +"When ImplicitAnyClasses is On and a local queue of the same name\n" +"exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n" +"an implicit class called \"Anyprinter\" is created instead.

\n" +"

\n" +"When ImplicitAnyClasses is Off, implicit classes are not created\n" +"when there is a local queue of the same name.

\n" +"

\n" +"Disabled by default.

\n" +msgstr "" +"Buat bukan e\n" +" Guna""\n" +"

atau bukan kepada cipta

\n" +"

adalah On dan lokal dari unama e pencetakprinter@server1printer@server1 " +"adalah

\n" +"

adalah Off bukan adalah lokal dari unama

\n" +"

default

t" + +#: cupsd.conf.template:921 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Max jobs (MaxJobs)\n" -#~ "

\n" -#~ "Maximum number of jobs to keep in memory (active and completed).\n" -#~ "Default is 0 (no limit).

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Max\n" -#~ "

nombor dari kepada in aktif dan selesai adalah tidak

t" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max jobs (MaxJobs)\n" +"

\n" +"Maximum number of jobs to keep in memory (active and completed).\n" +"Default is 0 (no limit).

\n" +msgstr "" +"Buat bukan e\n" +" Max\n" +"

nombor dari kepada in aktif dan selesai adalah tidak

t" +#: cupsd.conf.template:930 #, fuzzy -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Max jobs per user (MaxJobsPerUser)\n" -#~ "

\n" -#~ "The MaxJobsPerUser directive controls the maximum number of active\n" -#~ "jobs that are allowed for each user. Once a user reaches the limit, new\n" -#~ "jobs will be rejected until one of the active jobs is completed, stopped,\n" -#~ "aborted, or canceled.

\n" -#~ "

\n" -#~ "Setting the maximum to 0 disables this functionality.\n" -#~ "Default is 0 (no limit).\n" -#~ "

\n" -#~ msgstr "" -#~ "Buat bukan e\n" -#~ " Max\n" -#~ "

nombor dari aktif for dari aktif adalah selesai atau

\n" -#~ "

kepada adalah tidak\n" -#~ "

t" - -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Max jobs per printer (MaxJobsPerPrinter)\n" -#~ "

\n" -#~ "The MaxJobsPerPrinter directive controls the maximum number of active\n" -#~ "jobs that are allowed for each printer or class. Once a printer or class\n" -#~ "reaches the limit, new jobs will be rejected until one of the active jobs\n" -#~ "is completed, stopped, aborted, or canceled.

\n" -#~ "

\n" -#~ "Setting the maximum to 0 disables this functionality.\n" -#~ "Default is 0 (no limit).\n" -#~ "

\n" -#~ msgstr "" -#~ "Tugas maksimum per pencetak (MaxJobsPerPrinter)\n" -#~ "

\n" -#~ "Arahan MaxJobsPerPrinter mengawal jumlah maksimum tugas aktif\n" -#~ "yang dibenarkan bagi setiap pencetak atau kelas. Sebaik pencetak atau kelas\n" -#~ "mencapai had, tugas baru akan ditolak sehingga satu dari tugas aktif\n" -#~ "telah selesai, berhenti, di hentipaksa, atau dibatalkan.

\n" -#~ "

\n" -#~ "Menetapkan maksimum ke 0 mematikan fungsi ini.\n" -#~ "Default adalah 0 (tiada had).\n" -#~ "

\n" - -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Port\n" -#~ "

\n" -#~ "The port value that the CUPS daemon is listening to. Default is 631.

\n" -#~ msgstr "" -#~ "Port\n" -#~ "

\n" -#~ "Nilai port yang didengari oleh daemon CUPS. Default adalah 631.

\n" - -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "Address\n" -#~ "

\n" -#~ "The address that the CUPS daemon is listening at. Leave it empty or use\n" -#~ "an asterisk (*) to specify a port value on the entire subnetwork.

\n" -#~ msgstr "" -#~ "Alamat\n" -#~ "

\n" -#~ "Alamat yang daemon CUPS sedang dengar. Biarkan kosong atau guna\n" -#~ "asterik (*) untuk menyatakan nilai port pada semua subrangkaian.

\n" - -#~ msgid "" -#~ "_: Do not translate the keyword between brackets (e.g. ServerName, ServerAdmin, etc.)\n" -#~ "

Check this box if you want to use SSL encryption with this address/port.\n" -#~ "

\n" -#~ msgstr "" -#~ "

Tanda kekotak ini jika anda hendak menggunakan enkripsi SSL dengan alamat/port ini.\n" -#~ "

\n" +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max jobs per user (MaxJobsPerUser)\n" +"

\n" +"The MaxJobsPerUser directive controls the maximum number of active\n" +"jobs that are allowed for each user. Once a user reaches the limit, new\n" +"jobs will be rejected until one of the active jobs is completed, stopped,\n" +"aborted, or canceled.

\n" +"

\n" +"Setting the maximum to 0 disables this functionality.\n" +"Default is 0 (no limit).\n" +"

\n" +msgstr "" +"Buat bukan e\n" +" Max\n" +"

nombor dari aktif for dari aktif adalah selesai atau

\n" +"

kepada adalah tidak\n" +"

t" + +#: cupsd.conf.template:945 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Max jobs per printer (MaxJobsPerPrinter)\n" +"

\n" +"The MaxJobsPerPrinter directive controls the maximum number of active\n" +"jobs that are allowed for each printer or class. Once a printer or class\n" +"reaches the limit, new jobs will be rejected until one of the active jobs\n" +"is completed, stopped, aborted, or canceled.

\n" +"

\n" +"Setting the maximum to 0 disables this functionality.\n" +"Default is 0 (no limit).\n" +"

\n" +msgstr "" +"Tugas maksimum per pencetak (MaxJobsPerPrinter)\n" +"

\n" +"Arahan MaxJobsPerPrinter mengawal jumlah maksimum tugas aktif\n" +"yang dibenarkan bagi setiap pencetak atau kelas. Sebaik pencetak atau kelas\n" +"mencapai had, tugas baru akan ditolak sehingga satu dari tugas aktif\n" +"telah selesai, berhenti, di hentipaksa, atau dibatalkan.

\n" +"

\n" +"Menetapkan maksimum ke 0 mematikan fungsi ini.\n" +"Default adalah 0 (tiada had).\n" +"

\n" + +#: cupsd.conf.template:960 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Port\n" +"

\n" +"The port value that the CUPS daemon is listening to. Default is 631.

\n" +msgstr "" +"Port\n" +"

\n" +"Nilai port yang didengari oleh daemon CUPS. Default adalah 631.

\n" + +#: cupsd.conf.template:966 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"Address\n" +"

\n" +"The address that the CUPS daemon is listening at. Leave it empty or use\n" +"an asterisk (*) to specify a port value on the entire subnetwork.

\n" +msgstr "" +"Alamat\n" +"

\n" +"Alamat yang daemon CUPS sedang dengar. Biarkan kosong atau guna\n" +"asterik (*) untuk menyatakan nilai port pada semua subrangkaian.

\n" + +#: cupsd.conf.template:973 +msgid "" +"_: Do not translate the keyword between brackets (e.g. ServerName, " +"ServerAdmin, etc.)\n" +"

Check this box if you want to use SSL encryption with this address/port.\n" +"

\n" +msgstr "" +"

Tanda kekotak ini jika anda hendak menggunakan enkripsi SSL dengan alamat/" +"port ini.\n" +"

\n" -- cgit v1.2.1