From 0a3068399e3af480a253ac401793c0e6afadde3e Mon Sep 17 00:00:00 2001 From: Darrell Anderson Date: Fri, 23 Mar 2012 18:31:57 -0500 Subject: Fix KDE -> TDE branding. --- tde-i18n-nds/messages/tdelibs/tdeprint.po | 326 +++++++++++++++--------------- 1 file changed, 163 insertions(+), 163 deletions(-) (limited to 'tde-i18n-nds/messages/tdelibs/tdeprint.po') diff --git a/tde-i18n-nds/messages/tdelibs/tdeprint.po b/tde-i18n-nds/messages/tdelibs/tdeprint.po index 6bc24836ed8..c315bfda3a5 100644 --- a/tde-i18n-nds/messages/tdelibs/tdeprint.po +++ b/tde-i18n-nds/messages/tdelibs/tdeprint.po @@ -511,13 +511,13 @@ msgstr "" msgid "" " Printer Selection Menu: " "

Use this combo box to select the printer to which you want to print. " -"Initially (if you run KDEPrint for the first time), you may only find the " -"KDE special printers (which save jobs to disk [as PostScript- or " +"Initially (if you run TDEPrint for the first time), you may only find the " +"TDE special printers (which save jobs to disk [as PostScript- or " "PDF-files], or deliver jobs via email (as a PDF attachment). If you are missing " "a real printer, you need to... " "

" "

Note: It may happen that you successfully connected to a remote CUPS " -"server and still do not get a printer list. If this happens: force KDEPrint to " +"server and still do not get a printer list. If this happens: force TDEPrint to " "re-load its configuration files. To reload the configuration files, either " "start kprinter again, or use the switch the print system away from CUPS and " "back again once. The print system switch can be made through a selection in " @@ -534,11 +534,11 @@ msgstr "" " Drucker-Menü:" "

Bruuk dit Utsöökfeld, wenn Du den Drucker fastleggen wullt, de Dien Opgaav " "utföhren schall. Standardwies finnst Du hier bloots de " -"besünneren KDE-Druckers, de Dateien utgifft (t.B. as PostScript oder PDF) " +"besünneren TDE-Druckers, de Dateien utgifft (t.B. as PostScript oder PDF) " "oder de Utgaav as PDF per Nettpost verschickt. Wenn hier keen echte Drucker " "steiht, muttst Du..." "

" "

Beacht: Dat kann vörkamen, dat Du Di en CUPS-Server tokoppelt hest un " -"liekers keen Druckerlist kriggst. Wenn dat so is, kannst Du KDEPrint dwingen, " +"liekers keen Druckerlist kriggst. Wenn dat so is, kannst Du TDEPrint dwingen, " "sien Instellendateien nieg to lesen, wenn Du \"kprinter\" nochmaal startst oder " "dat Drucksysteem över dat Utsöökfeld nerrn gau maal op wat anners un denn " "wedder op CUPS stellst.

" @@ -571,7 +571,7 @@ msgid "" "

To create a personal 'selective view list', click on the " "'System Options' button at the bottom of this dialog. Then, in the new " "dialog, select 'Filter' (left column in the " -"KDE Print Configuration dialog) and setup your selection..

" +"TDE Print Configuration dialog) and setup your selection..

" "

Warning: Clicking this button without prior creation of a personal " "'selective view list' will make all printers dissappear from the " "view. (To re-enable all printers, just click this button again.)

" @@ -590,16 +590,16 @@ msgstr "" #: kprintdialog.cpp:154 msgid "" -"KDE Add Printer Wizard " -"

This button starts the KDE Add Printer Wizard.

" +"TDE Add Printer Wizard " +"

This button starts the TDE Add Printer Wizard.

" "

Use the Wizard (with \"CUPS\" or \"RLPR\"" ") to add locally defined printers to your system.

" -"

Note: The KDE Add Printer Wizard does not " +"

Note: The TDE Add Printer Wizard does not " "work, and this button is disabled if you use \"Generic LPD\", " "\"LPRng\", or \"Print Through an External Program\".)

" msgstr "" -"KDE-Hölper för't Tofögen vun Druckers" -"

Disse Knoop start den KDE-Hölper för dat Tofögen vun Druckers.

" +"TDE-Hölper för't Tofögen vun Druckers" +"

Disse Knoop start den TDE-Hölper för dat Tofögen vun Druckers.

" "

Bruuk den Hölper mit \"CUPS\" oder \"RLPR\" " "för dat Tofögen vun lokale Druckers to Dien Systeem.

" "

Beacht: Disse Hölper un de Knoop funkscheneert nich" @@ -632,30 +632,30 @@ msgid "" "

This button starts a new dialog where you can adjust various settings of " "your printing system. Amongst them: " "

    " -"
  • Should KDE applications embed all fonts into the PostScript they generate " +"
  • Should TDE applications embed all fonts into the PostScript they generate " "for printing? " -"
  • Should KDE use an external PostScript viewer like gv " +"
  • Should TDE use an external PostScript viewer like gv " "for print page previews? " -"
  • Should KDEPrint use a local or a remote CUPS server?,
" +"
  • Should TDEPrint use a local or a remote CUPS server?, " "and many more.... " msgstr "" " Systeemoptschonen:" "

    Disse Knoop start en niegen Dialoog, mit den Du en Reeg Optschonen för Dien " "Drucksysteem fastleggen kannst, dorbi sünd:" "

      " -"
    • Schöölt KDE-Programmen all Schriftoorden in de opstellten " +"
    • Schöölt TDE-Programmen all Schriftoorden in de opstellten " "PostScript-Dateien inbetten?" -"
    • Schall KDE en extern PostScript-Kieker as \"gv\" " +"
    • Schall TDE en extern PostScript-Kieker as \"gv\" " "för Siedenvöransichten bruken?" -"
    • Schall KDE en lokalen CUPS-Server oder en op en anner Reekner bruken?
    " +"
  • Schall TDE en lokalen CUPS-Server oder en op en anner Reekner bruken?" "un vele annere..." #: kprintdialog.cpp:182 msgid "" -" Help: This button takes you to the complete KDEPrint Manual" +" Help: This button takes you to the complete TDEPrint Manual" ". " msgstr "" -" Hülp: Mit dissen Knoop kannst Du dat hele KDEPrint-Handbook " +" Hülp: Mit dissen Knoop kannst Du dat hele TDEPrint-Handbook " "ankieken." #: kprintdialog.cpp:186 @@ -669,12 +669,12 @@ msgstr "" #: kprintdialog.cpp:190 msgid "" " Print: This button sends the job to the printing process. If you " -"are sending non-PostScript files, you may be asked if you want KDE to convert " +"are sending non-PostScript files, you may be asked if you want TDE to convert " "the files into PostScript, or if you want your print subsystem (like CUPS) to " "do this. " msgstr "" "Drucken: Disse Knoop schickt de Druckopgaav loos. Wenn Du wat anners " -"as PostScript-Dateien schickst, warrst Du villicht fraagt, wat KDE de Dateien " +"as PostScript-Dateien schickst, warrst Du villicht fraagt, wat TDE de Dateien " "na PostScript ümwanneln oder wat CUPS dat doon schall." #: kprintdialog.cpp:196 @@ -698,13 +698,13 @@ msgstr "" msgid "" " Output File Name and Path: The \"Output file:\" shows you where " "your file will be saved if you decide to \"Print to File\" your job, using one " -"of the KDE Special Printers named \"Print to File (PostScript)\" or " +"of the TDE Special Printers named \"Print to File (PostScript)\" or " "\"Print to File (PDF)\". Choose a name and location that suits your need by " "using the button and/or editing the line on the right. " msgstr "" "Utgaavdatei un Padd: Dat Feld \"Utgaavdatei:\" gifft an, woneem Dien " "Datei sekert warrt, wenn Du för Dien Druckopgaav een " -"Besünnere KDE-Druckers \"PostScript-Datei utgeven\" oder \"PDF-Datei " +"Besünnere TDE-Druckers \"PostScript-Datei utgeven\" oder \"PDF-Datei " "utgeven\" bruukst. Giff en Naam un Oort in, de Di topass kummt, un/oder bruuk " "den Knoop rechterhand." @@ -755,9 +755,9 @@ msgid "" "\"poster\" or \"pamphlet\" layout looks like you expected, without wasting " "paper first. It also lets you cancel the job if something looks wrong. " "

    Note: The preview feature (and therefore this checkbox) is only " -"visible for printjobs created from inside KDE applications. If you start " +"visible for printjobs created from inside TDE applications. If you start " "kprinter from the commandline, or if you use kprinter as a print command for " -"non-KDE applications (like Acrobat Reader, Firefox or OpenOffice), print " +"non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), print " "preview is not available here. " msgstr "" "Druckvöransicht Aktiveer dit, wenn Du en Vöransicht vun Dien Utdruck " @@ -765,7 +765,7 @@ msgstr "" "utsüht, as Du Di dat dacht hest, ahn Papeer to spillen. Du kannst de Opgaav ok " "afbreken, wenn dor wat verkehrt utsüht." "

    Beacht bitte: De Vöransicht-Funkschoon (un dormit dit Krüüzfeld) is " -"bloots verföögbor, wenn de Druckopgaav mit en KDE-Programm opstellt wöör. Wenn " +"bloots verföögbor, wenn de Druckopgaav mit en TDE-Programm opstellt wöör. Wenn " "Du kprinter op de Befehlsreeg startst oder dat as Druckbefehl in en anner " "Programm (as t.B. Acrobat Reader, Firefox oder OpenOffice) bruukst, is keen " "Vöransicht verföögbor." @@ -910,7 +910,7 @@ msgid "" "secretaries who serve different bosses, etc.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-billing=...         # example: \"Marketing_Department\" or "
 "\"Joe_Doe\"

    " @@ -948,7 +948,7 @@ msgid "" "trays).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-hold-until=...      # example: \"indefinite\" or \"no-hold\"  "
 "

    " @@ -982,7 +982,7 @@ msgid "" "

    They contain any string you type into the line edit field.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-label=\"...\"      # example: \"Company Confidential\"
    " "

    " @@ -1015,7 +1015,7 @@ msgid "" "no other, higher prioritized one is present).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-priority=...   # example: \"10\" or \"66\" or \"99\"
    " "

    " @@ -1181,7 +1181,7 @@ msgstr "" "

    Samba-Server

    De PostScript-Drieverdateien för Adobe/Windows un de " "Drucker-PPD vun CUPS warrt na de besünnere Freegaav vun den Samba-Server " "[print$] exporteert (Wenn Du den Born-CUPS-Server ännern wullt, bruuk " -"toeerst KDE-Druckpleger instellen -> CUPS-Server" +"toeerst TDE-Druckpleger instellen -> CUPS-Server" "). De Freegaav [print$] mutt op de Samba-Siet vörhannen wesen, ehr Du " "op den Exporteren-Knoop nerrn klickst." @@ -1476,7 +1476,7 @@ msgid "" "

    The default value is 10, meaning that the font is scaled in a way that 10 " "characters per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o cpi=...          # example: \"8\" or \"12\"

    " msgstr "" @@ -1500,7 +1500,7 @@ msgid "" "

    The default value is 6, meaning that the font is scaled in a way that 6 " "lines per inch will be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o lpi=...         # example \"5\" or \"7\"

    " msgstr "" @@ -1524,7 +1524,7 @@ msgid "" "

    The default value is 1, meaning that only one column of text per page will " "be printed.

    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o columns=...     # example: \"2\" or \"4\"

    " msgstr "" @@ -1551,11 +1551,11 @@ msgid "" "

    These settings control the appearance of text on printouts. They are only " "valid for printing text files or input directly through kprinter.

    " "

    Note: These settings have no effect whatsoever for other input " -"formats than text, or for printing from applications such as the KDE Advanced " +"formats than text, or for printing from applications such as the TDE Advanced " "Text Editor. (Applications in general send PostScript to the print system, and " "'kate' in particular has its own knobs to control the print output.

    . " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o cpi=...         # example: \"8\" or \"12\"  "
 "
         -o lpi=...         # example: \"5\" or \"7\"  "
@@ -1582,9 +1582,9 @@ msgid ""
 "
    Margins
      "
 "
    These settings control the margins of printouts on the paper. They are not "
 "valid for  jobs originating from applications which define their own page "
-"layout internally and  send PostScript to KDEPrint (such as KOffice or "
+"layout internally and  send PostScript to TDEPrint (such as KOffice or "
 "OpenOffice.org). 
      "
-"
    When printing from KDE applications, such as KMail and Konqueror, or "
+"
    When printing from TDE applications, such as KMail and Konqueror, or "
 "printing an ASCII text  file through kprinter, you can choose your preferred "
 "margin settings here. 
      "
 "
    Margins may be set individually for each edge of the paper. The combo box at "
@@ -1593,7 +1593,7 @@ msgid ""
 "
    You can even use the mouse to grab one margin and drag it to the intended "
 "position (see the  preview picture on the right side). 
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o page-top=...      # example: \"72\"  "
 "
         -o page-bottom=...   # example: \"24\"  "
@@ -1604,8 +1604,8 @@ msgstr ""
 "
    Ränners
    "
 "
    Disse Optschonen leggt de Ränners vun Sieden bi't Drucken fast. Se hebbt "
 "keen Effekt för Opgaven ut Programmen, de ehr Sieden sülven torechtmaakt un "
-"PostScript na KDEPrint sendt (as t.B. KOffice oder OpenOffice.org).
    "
-"
    Wenn Du en KDE-Programm as KMail oder Konqueror bruukst oder en ASCII-Datei "
+"PostScript na TDEPrint sendt (as t.B. KOffice oder OpenOffice.org).
    "
+"
    Wenn Du en TDE-Programm as KMail oder Konqueror bruukst oder en ASCII-Datei "
 "över kprinter druckst, kannst Du hier de Ränners instellen.
    "
 "
    Du kannst för elkeen Kant den Rand enkelt fastleggen. Mi de Utwahl nerrn "
 "kannst Du twischen de Maateenheiten Pixels, Millimeters, Zentimeters un Toll "
@@ -1633,7 +1633,7 @@ msgid ""
 "enscript  pre-filter on the Filters tab. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  
     
      "
 msgstr ""
@@ -1661,7 +1661,7 @@ msgid ""
 "margins, though.) 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o prettyprint=false  
     
      "
 msgstr ""
@@ -1688,7 +1688,7 @@ msgid ""
 "enscript      pre-filter on the Filters tab. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o prettyprint=true.  "
 "
         -o prettyprint=false  
     
      "
@@ -1768,7 +1768,7 @@ msgid ""
 "server via this editable list.  There are 3 purposes for this: "
 "
       "
 "
    • Use any current or future standard CUPS job option not supported by the  "
-"KDEPrint GUI. 
      •  "
+"TDEPrint GUI.  "
 "
    • Control any custom job option you may want to support in custom CUPS "
 "filters  and backends plugged into the CUPS filtering chain.
      •   "
 "
    • Send short messages to the operators of your production printers in your  "
@@ -1802,7 +1802,7 @@ msgid ""
 "
      Note: the fields must not include spaces, tabs or quotes. You may "
 "need to  double-click on a field to edit it. "
 "
      Warning: Do not use such standard CUPS option names which also can be "
-"used  through the KDEPrint GUI. Results may be  unpredictable if they conflict, "
+"used  through the TDEPrint GUI. Results may be  unpredictable if they conflict, "
 " or if they are sent multiple times. For all options supported by the GUI, "
 "please do use  the GUI. (Each GUI element's  'WhatsThis' names the related CUPS "
 "option name.) 
        "
@@ -2072,7 +2072,7 @@ msgid ""
 "colors defined in the HP-GL/2 reference manual from Hewlett Packard. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o blackplot=true  
        
        "
 msgstr ""
@@ -2101,7 +2101,7 @@ msgid ""
 "the HP-GL  to PostScript assumes the plot is ANSI E size. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
           -o fitplot=true   
       
        "
 msgstr ""
@@ -2133,7 +2133,7 @@ msgid ""
 "set inside  the plot file itself..
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches with the CUPS commandline job option parameter:  "
 "
          -o penwidth=...   # example: \"2000\" or \"500\"  
       
        "
 msgstr ""
@@ -2153,11 +2153,11 @@ msgstr ""
 #: cups/kphpgl2page.cpp:85
 msgid ""
 "   HP-GL Print Options  "
-"
      All options on this page are only applicable if you use KDEPrint to send "
+"
      All options on this page are only applicable if you use TDEPrint to send "
 "HP-GL and  HP-GL/2 files to one of your printers. 
        "
 "
      HP-GL and HP-GL/2 are page description languages developed by "
 "Hewlett-Packard to drive  Pen Plotting devices. 
        "
-"
      KDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
+"
      TDEPrint can (with the help of CUPS) convert the HP-GL file format and print "
 "it  on any installed printer. 
        "
 "
      Note 1: To print HP-GL files, start 'kprinter' and simply load the "
 "file into  the running kprinter.
       "
@@ -2166,7 +2166,7 @@ msgid ""
 "1.1.22).
        "
 "
        "
 "
        "
-"
      Additional hint for power users: These KDEPrint GUI elements "
+"
      Additional hint for power users: These TDEPrint GUI elements "
 "match with CUPS commandline job option parameters:  "
 "
           -o blackplot=...  # examples: \"true\" or \"false\"  "
 "
           -o fitplot=...    # examples: \"true\" or \"false\"  "
@@ -2174,10 +2174,10 @@ msgid ""
 msgstr ""
 " HP-GL-Druckinstellen"
 "
      All Optschonen op disse Siet hebbt bloots denn en Effekt, wenn Du "
-"HP-GL(/2)-Dateien mit KDEPrint na een vun Dien Druckers sennst.
      "
+"HP-GL(/2)-Dateien mit TDEPrint na een vun Dien Druckers sennst.
      "
 "
      HP-GL un HP-GL/2 sünd Spraken vun Hewlett-Packard för dat Beschrieven vun "
 "Sieden, de op Plotters utgeven warrn schöölt.
      "
-"
      KDEPrint kann dat HP-GL-Formaat mit de Hülp vun CUPS ümwanneln un op elkeen "
+"
      TDEPrint kann dat HP-GL-Formaat mit de Hülp vun CUPS ümwanneln un op elkeen "
 "installeerten Drucker utgeven.
      "
 "
      Anmarken 1: Wenn Du HP-GL-Dateien drucken wullt, start \"kprinter\" "
 "un laad de eenfach de Datei.
      "
@@ -2420,7 +2420,7 @@ msgid ""
 "lighten the print. Values less than 100 will darken the print. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o brightness=...      # use range from \"0\" to \"200\"  
        
        "
 "      "
@@ -2474,7 +2474,7 @@ msgid ""
 "Light-navy-blue       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o hue=...     # use range from \"-360\" to \"360\"  
       
        "
 msgstr ""
@@ -2531,7 +2531,7 @@ msgid ""
 "make the colors extremely intense. 
       "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o saturation=...      # use range from \"0\" to \"200\"  
       
        "
 ""
@@ -2560,7 +2560,7 @@ msgid ""
 "preview. 
        "
 "
        "
 "
        "
-"
      Additional hint for power users: This KDEPrint GUI element "
+"
      Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
          -o gamma=...      # use range from \"1\" to \"3000\"  
       
        "
 ""
@@ -2666,7 +2666,7 @@ msgid ""
 "printed.  Scaling in % of natural image size defaults to 100 %.  
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o natural-scaling=...     # range in  %  is 1....800  "
 "
         -o scaling=...             # range in  %  is 1....800  "
@@ -2767,7 +2767,7 @@ msgid ""
 "paper printout. Default  is 'center'. 
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o position=...       # examples: \"top-left\" or \"bottom\"  
     "
 "
      "
@@ -3610,12 +3610,12 @@ msgstr "E&xtern Vöransichtprogramm bruken"
 
 #: management/kmconfigpreview.cpp:44
 msgid ""
-"You can use an external preview program (PS viewer) instead of the KDE built-in "
-"preview system. Note that if the KDE default PS viewer (KGhostView) cannot be "
-"found, KDE tries automatically to find another external PostScript viewer"
+"You can use an external preview program (PS viewer) instead of the TDE built-in "
+"preview system. Note that if the TDE default PS viewer (KGhostView) cannot be "
+"found, TDE tries automatically to find another external PostScript viewer"
 msgstr ""
 "Du kannst en extern Vöransichtprogramm (PostScript-Kieker) bruken ansteed vun "
-"de inbute KDE-Vöransicht. Beacht dat KDE automaatsch na en anner PS-Kieker "
+"de inbute TDE-Vöransicht. Beacht dat TDE automaatsch na en anner PS-Kieker "
 "söcht, wenn sik dat Standardprogramm (KGhostView) nich finnen lett."
 
 #: management/kmwdrivertest.cpp:41
@@ -3684,8 +3684,8 @@ msgstr ""
 "
    %1
    "
 
 #: management/kaddprinterwizard.cpp:10
-msgid "Configure KDE Print"
-msgstr "KDE-Drucken instellen"
+msgid "Configure TDE Print"
+msgstr "TDE-Drucken instellen"
 
 #: management/kaddprinterwizard.cpp:11
 msgid "Configure print server"
@@ -3719,8 +3719,8 @@ msgstr ""
 "Opstellen vun de Drieverdatenbank fehlslaan, \"%1\" lett sik nich utföhren."
 
 #: management/kmdbcreator.cpp:113
-msgid "Please wait while KDE rebuilds a driver database."
-msgstr "Bitte tööv, wielt KDE de Drieverdatenbank opstellt."
+msgid "Please wait while TDE rebuilds a driver database."
+msgstr "Bitte tööv, wielt TDE de Drieverdatenbank opstellt."
 
 #: management/kmdbcreator.cpp:114
 msgid "Driver Database"
@@ -3795,8 +3795,8 @@ msgid "Change..."
 msgstr "Ännern..."
 
 #: management/kmconfigdialog.cpp:38
-msgid "KDE Print Configuration"
-msgstr "KDE-Druckpleger instellen"
+msgid "TDE Print Configuration"
+msgstr "TDE-Druckpleger instellen"
 
 #: management/kmwdriver.cpp:33
 msgid "Printer Model Selection"
@@ -3949,10 +3949,10 @@ msgstr " s"
 
 #: management/kmconfiggeneral.cpp:53
 msgid ""
-"This time setting controls the refresh rate of various KDE Print "
+"This time setting controls the refresh rate of various TDE Print "
 "components like the print manager and the job viewer."
 msgstr ""
-"Disse Optschoon leggt de Opfrischtiet vör verscheden Delen vun KDE Print "
+"Disse Optschoon leggt de Opfrischtiet vör verscheden Delen vun TDE Print "
 "fast, as de Druckpleger oder de Opgavenkieker."
 
 #: management/kmconfiggeneral.cpp:57
@@ -4098,13 +4098,13 @@ msgstr ""
 
 #: management/kmconfigfonts.cpp:89
 msgid ""
-"When using font embedding you can select additional directories where KDE "
+"When using font embedding you can select additional directories where TDE "
 "should search for embeddable font files. By default, the X server font path is "
 "used, so adding those directories is not needed. The default search path should "
 "be sufficient in most cases."
 msgstr ""
 "Wenn Du dat Inbetten vun Schriften bruukst, kannst Du anner Ornern utsöken, "
-"binnen de KDE na passen Schriftoorden söken schall. Standardwies warrt de "
+"binnen de TDE na passen Schriftoorden söken schall. Standardwies warrt de "
 "Schriftoordenpadd vun den X-Server bruukt, dat Tofögen vun disse Ornern deit "
 "also nich noot. De Standard-Söökpadd schull normalerwies langen."
 
@@ -4499,7 +4499,7 @@ msgid ""
 "
    "
 "
    We hope you'll enjoy this tool!
    "
 "
    "
-"The KDE printing team.
    "
+"The TDE printing team.
    "
 msgstr ""
 "
    Willkamen.
    "
 "
    "
@@ -4510,7 +4510,7 @@ msgstr ""
 "
    "
 "
    Wi haapt, dat Du Spooß an dit Programm hest.
    "
 "
    "
-"De Druck-Koppel vun KDE.
    "
+"De Druck-Koppel vun TDE.
    "
 
 #: management/kmdriverdbwidget.cpp:51
 msgid "&PostScript printer"
@@ -5011,13 +5011,13 @@ msgid ""
 "  File Open button "
 "
    This button tries to open the highlighted file, so you can view or edit it "
 "before you send it to the printing system.
     "
-"
    If you open files, KDEPrint will use the application matching the MIME type "
+"
    If you open files, TDEPrint will use the application matching the MIME type "
 "of the file.
         "
 msgstr ""
 " \"Datei opmaken\"-Knoop"
 "
    Mit dissen Knoop kannst Du de markeerte Datei opmaken, so dat Du ehr "
 "ankieken oder bewerken kannst, ehr se an't Drucksysteem schickt warrt.
    "
-"
    KDEPrint söcht dat Programm för't Opmaken na den MIME-Typ vun de Datei "
+"
    TDEPrint söcht dat Programm för't Opmaken na den MIME-Typ vun de Datei "
 "ut.
    "
 
 #: kfilelist.cpp:82
@@ -5025,7 +5025,7 @@ msgid ""
 "  File List view "
 "
    This list displays all the files you selected for printing. You can see the "
 "file name(s), file path(s) and the file (MIME) type(s) as determined by "
-"KDEPrint. You may re-arrange the  initial order of the list  with the help of "
+"TDEPrint. You may re-arrange the  initial order of the list  with the help of "
 "the arrow buttons on the right.
     "
 "
    The files will be printed as a single job, in the same order as displayed in "
 "the list.
     "
@@ -5033,18 +5033,18 @@ msgid ""
 "locations. The files may be of multiple MIME types. The buttons on the right "
 "side let you add more files, remove already selected files from the list,  "
 "re-order the list (by moving files up or down), and open files. If you open "
-"files, KDEPrint will use the application matching the MIME type of the file.
     "
+"files, TDEPrint will use the application matching the MIME type of the file.
     "
 "    "
 msgstr ""
 " Dateilist-Ansicht"
 "
    De List wiest all Dateien, de Du för't Utdrucken utsöcht hest. Du kannst ehr "
-"Naams, Padden un MIME-Typen (as vun KDEPrint faststellt) sehn. Du kannst de "
+"Naams, Padden un MIME-Typen (as vun TDEPrint faststellt) sehn. Du kannst de "
 "Reeg vun de Dateien mit de Knööp rechterhand ännern.
    "
 "
    De Dateien warrt as en enkel Opgaav druckt, in de Reeg as se op de List "
 "staht.
    "
 "
    Beacht:Du kannst mehr Dateien vun mehr Öörd utsöken, un se köönt "
 "verscheden MIME-Typen hebben. Mit de Knööp rechterhand kannst Du Dateien "
-"tofögen, wegdoon, de List nieg ornen un Dateien opmaken. KDEPrint söcht dat "
+"tofögen, wegdoon, de List nieg ornen un Dateien opmaken. TDEPrint söcht dat "
 "Programm för't Opmaken na den MIME-Typ vun de Datei ut.
    "
 
 #: kfilelist.cpp:103
@@ -5079,15 +5079,15 @@ msgstr "Topassen"
 msgid ""
 " Print Subsystem Selection "
 "
    This combo box shows (and lets you select) a print subsystem to be used by "
-"KDEPrint. (This print subsystem must, of course, be installed inside your "
-"Operating System.) KDEPrint usually auto-detects the correct print subsystem by "
+"TDEPrint. (This print subsystem must, of course, be installed inside your "
+"Operating System.) TDEPrint usually auto-detects the correct print subsystem by "
 "itself upon first startup. Most Linux distributions have \"CUPS\", the "
 "Common UNIX Printing System. "
 msgstr ""
 " Drucksysteem utsöken"
-"
    Mit Disse Utwahl kannst Du dat Drucksysteem utsöken, dat KDEPrint bruken "
+"
    Mit Disse Utwahl kannst Du dat Drucksysteem utsöken, dat TDEPrint bruken "
 "schall. (Dat mutt natürlich ok op Dien Reekner installeert wesen.) Normalerwies "
-"leggt KDEPrint dat Drucksysteem sülven bi sien eersten Start fast. De mehrsten "
+"leggt TDEPrint dat Drucksysteem sülven bi sien eersten Start fast. De mehrsten "
 "Linux-Distributschonen bruukt \"CUPS\", dat Allgemeen UNIX Drucksysteem "
 "(engl. \"Common UNIX Printing System\").
    "
 
@@ -5133,7 +5133,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
      "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 " List vun Drieveroptschonen (ut PPD)"
 "
    De bövere Deel vun dissen Dialoog wiest all Opgaav-Optschonen, as se binnen "
@@ -5153,7 +5153,7 @@ msgstr ""
 "Standardinstellen för disse Opgavenreeg utföhrt."
 "
    Beacht bitte:De Tall vun verföögbore Optschonen hangt vun den Driever "
 "för de Opgavenreeg af. \"Rohdaten\"-Regen hebbt keen Driever oder en "
-"PPD. För se laadt KDEPrint disse Dialoogsiet nich, dat gifft em denn also nich "
+"PPD. För se laadt TDEPrint disse Dialoogsiet nich, dat gifft em denn also nich "
 "binnen den kprinter-Dialoog.
    "
 
 #: driverview.cpp:71
@@ -5178,7 +5178,7 @@ msgid ""
 "
    Note. The number of available job options depends strongly on the "
 "actual  driver used for your print queue. 'Raw' "
 "queues do not have a driver or a   PPD. For raw queues this tab page is not "
-"loaded by KDEPrint, and thus is not present  in the kprinter dialog.
      "
+"loaded by TDEPrint, and thus is not present  in the kprinter dialog.
      "
 msgstr ""
 " Möögliche Weerten för angeven Optschoon (ut PPD)"
 "
    Dat Rebeet nerrn wiest all möögliche Weerten för de baven markeerte "
@@ -5196,7 +5196,7 @@ msgstr ""
 "Standardinstellen för disse Opgavenreeg utföhrt."
 "
    Beacht bitte:De Tall vun verföögbore Optschonen hangt vun den Driever "
 "för de Opgavenreeg af. \"Rohdaten\"-Regen hebbt keen Driever oder en "
-"PPD. För se laadt KDEPrint disse Dialoogsiet nich, dat gifft em denn also nich "
+"PPD. För se laadt TDEPrint disse Dialoogsiet nich, dat gifft em denn also nich "
 "binnen den kprinter-Dialoog.
    "
 
 #: kprinter.cpp:280
@@ -5258,8 +5258,8 @@ msgstr "Parallel Koppelsteed Nr.%1"
 
 #: kmmanager.cpp:486 kmmanager.cpp:502 kxmlcommand.cpp:661
 #, c-format
-msgid "Unable to load KDE print management library: %1"
-msgstr "Druckpleeg-Bibliotheek vun KDE lett sik nich laden: %1"
+msgid "Unable to load TDE print management library: %1"
+msgstr "Druckpleeg-Bibliotheek vun TDE lett sik nich laden: %1"
 
 #: kmmanager.cpp:491 kxmlcommand.cpp:669
 msgid "Unable to find wizard object in management library."
@@ -5285,13 +5285,13 @@ msgstr "Opgavenreeg op anner Reekner %1"
 
 #: kmspecialmanager.cpp:53
 msgid ""
-"A file share/tdeprint/specials.desktop was found in your local KDE directory. "
-"This file probably comes from a previous KDE release and should be removed in "
+"A file share/tdeprint/specials.desktop was found in your local TDE directory. "
+"This file probably comes from a previous TDE release and should be removed in "
 "order to manage global pseudo printers."
 msgstr ""
-"Binnen Dien lokalen KDE-Orner gifft dat en Datei "
+"Binnen Dien lokalen TDE-Orner gifft dat en Datei "
 "\"share/tdeprint/specials.desktop\". Disse Datei kummt wohrschienlich ut en "
-"öller KDE-Verschoon. Du schullst ehr wegdoon, wenn Du globale Besünnere "
+"öller TDE-Verschoon. Du schullst ehr wegdoon, wenn Du globale Besünnere "
 "Druckers plegen wullt."
 
 #: kprinterimpl.cpp:156
@@ -5320,10 +5320,10 @@ msgstr "Ünner-Druckperzess lett sik nich starten."
 
 #: kprinterimpl.cpp:281
 msgid ""
-"The KDE print server (tdeprintd) could not be contacted. Check that this "
+"The TDE print server (tdeprintd) could not be contacted. Check that this "
 "server is running."
 msgstr ""
-"De KDE-Druckserver (tdeprintd) lett sik nich ansnacken. Prööv bitte, wat "
+"De TDE-Druckserver (tdeprintd) lett sik nich ansnacken. Prööv bitte, wat "
 "disse Dämoon löppt."
 
 #: kprinterimpl.cpp:283
@@ -5365,11 +5365,11 @@ msgstr ""
 msgid ""
 "The MIME type %1 is not supported as input of the filter chain (this may happen "
 "with non-CUPS spoolers when performing page selection on a non-PostScript "
-"file). Do you want KDE to convert the file to a supported format?
    "
+"file). Do you want TDE to convert the file to a supported format?
    "
 msgstr ""
 "De MIME-Typ \"%1\" warrt as Ingaav för de Filterkeed nich ünnerstütt (dit kann "
 "mit en anner Drucksysteem (as CUPS) passeren, wenn in en Datei "
-"(Nich-PostScript) Sieden utsöcht warrt). Schall KDE de Datei in en ünnerstütt "
+"(Nich-PostScript) Sieden utsöcht warrt). Schall TDE de Datei in en ünnerstütt "
 "Formaat ümwanneln?
    "
 
 #: kprinterimpl.cpp:389 kprinterimpl.cpp:509
@@ -5419,20 +5419,20 @@ msgid ""
 "The file format  %1  is not directly supported by the current "
 "print system. You now have 3 options: "
 "
       "
-"
    •  KDE can attempt to convert this file automatically to a supported format. "
+"
    •  TDE can attempt to convert this file automatically to a supported format. "
 "(Select Convert) 
      • "
 "
    •  You can try to send the file to the printer without any conversion. "
 "(Select Keep) 
      • "
 "
    •  You can cancel the printjob. (Select Cancel) 
     "
-"Do you want KDE to attempt and convert this file to %2?    "
+"Do you want TDE to attempt and convert this file to %2?"
 msgstr ""
 "Dat Dateiformaat %1 warrt vun dat aktuelle Drucksysteem nicht "
 "ünnerstütt. Du kannst nu 3 Saken doon:"
 "
      "
-"
    • KDE kann versöken, de Datei automaatsch in en ünnerstütt Formaat "
+"
    • TDE kann versöken, de Datei automaatsch in en ünnerstütt Formaat "
 "ümtowanneln.
      • "
 "
    • Du kannst de Datei ahn Ümwanneln na den Drucker sennen.
      • "
-"
    • Du kannst dat Drucken afbreken.
     Schall KDE dat versöken un de "
+"
  • Du kannst dat Drucken afbreken.
    •  Schall TDE dat versöken un de "
 "Datei in %2 ümwanneln?    "
 
 #: kprinterimpl.cpp:518
@@ -5539,7 +5539,7 @@ msgid ""
 "installed.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o PageSize=...         # examples: \"A4\" or \"Letter\"  
     
      "
 ""
@@ -5563,7 +5563,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o MediaType=...        # example: \"Transparency\"  
     
      "
 msgstr ""
@@ -5585,7 +5585,7 @@ msgid ""
 "installed. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o InputSlot=...        # examples: \"Lower\" or \"LargeCapacity\"  "
 "
     
      "
@@ -5617,7 +5617,7 @@ msgid ""
 "down.
    • The icon changes according to your selection.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o orientation-requested=...       # examples: \"landscape\" or "
 "\"reverse-portrait\"

    " @@ -5659,7 +5659,7 @@ msgid "" "if you turn it over the short edge. (Some printer drivers name this mode " "duplex-tumbled). " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o duplex=...       # examples: \"tumble\" or \"two-sided-short-edge\" "
 "

    " @@ -5703,7 +5703,7 @@ msgid "" "

    CUPS comes with a selection of banner pages.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o job-sheets=...       # examples: \"standard\" or \"topsecret\"  "
 "

    " @@ -5744,7 +5744,7 @@ msgid "" "sheet in both places, your printout will not look as you intended.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o number-up=...        # examples: \"2\" or \"4\"

    " msgstr "" @@ -5870,13 +5870,13 @@ msgstr "%1: Utföhren fehlslaan. Naricht:

    %2

    " #: tdeprintd.cpp:176 msgid "" -"Some of the files to print are not readable by the KDE print daemon. This may " +"Some of the files to print are not readable by the TDE print daemon. This may " "happen if you are trying to print as a different user to the one currently " "logged in. To continue printing, you need to provide root's password." msgstr "" -"De KDE-Druckdämoon kann en poor vun de Dateien, de druckt warrn schullen, nich " +"De TDE-Druckdämoon kann en poor vun de Dateien, de druckt warrn schullen, nich " "lesen. Dat kann vörkamen, wenn Du as en anner Bruker drucken wullt as de " -"opstunns bi KDE anmeldte. För't Wiedermaken bruukst Du dat Passwoort vun den " +"opstunns bi TDE anmeldte. För't Wiedermaken bruukst Du dat Passwoort vun den " "Systeempleger." #: tdeprintd.cpp:181 @@ -5925,15 +5925,15 @@ msgstr "" #: kpcopiespage.cpp:55 msgid "" " Current Page: Select \"Current\" " -"if you want to print the page currently visible in your KDE application.

    " -"

    Note: this field is disabled if you print from non-KDE applications " -"like Mozilla or OpenOffice.org, since here KDEPrint has no means to determine " +"if you want to print the page currently visible in your TDE application.

    " +"

    Note: this field is disabled if you print from non-TDE applications " +"like Mozilla or OpenOffice.org, since here TDEPrint has no means to determine " "which document page you are currently viewing.

    " msgstr "" " Akuelle Siet: Mit \"Aktuelle\" warrt bloots de Siet " -"utdruckt, de binnen Dien KDE-Programm den Fokus hett.

    " +"utdruckt, de binnen Dien TDE-Programm den Fokus hett.

    " "

    Beacht bitte: Dit Feld is utmaakt, wenn Du vun en Programm ut " -"druckst, dat nich Deel vun KDE is, as t.B. Mozilla oder OpenOffice. KDEPrint " +"druckst, dat nich Deel vun TDE is, as t.B. Mozilla oder OpenOffice. TDEPrint " "kann denn nich rutkriegen, welk Siet vun dat Dokment jüst den Fokus hett.

    " "    " @@ -5947,7 +5947,7 @@ msgid "" "document.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-ranges=...     # example: \"4,6,10-13,17,20,23-25\"
    " "

    " @@ -5982,7 +5982,7 @@ msgid "" "model).

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

        -o page-set=...        # example: \"odd\" or \"even\"

    " "" @@ -6014,7 +6014,7 @@ msgid "" "

    The 'Copies' setting defaults to 1.

    " "
    " "
    " -"

    Additional hint for power users: This KDEPrint GUI element " +"

    Additional hint for power users: This TDEPrint GUI element " "matches with the CUPS commandline job option parameter: " "

         -o copies=...            # examples: \"5\" or \"42\"  "
 "
         -o outputorder=...       # example:  \"reverse\" "
@@ -6040,7 +6040,7 @@ msgid ""
 "and down arrows. You can also type the figure directly into the box. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
         -o copies=...            # examples: \"5\" or \"42\"  
     
      "
 ""
@@ -6065,7 +6065,7 @@ msgid ""
 "3-3-3-...\".
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o Collate=...           # example:  \"true\" or \"false\"  
     
      "
 ""
@@ -6094,7 +6094,7 @@ msgid ""
 "checkbox at the same time. 
     "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o outputorder=...       # example:  \"reverse\"  
     
      "
 msgstr ""
@@ -6190,18 +6190,18 @@ msgstr ""
 
 #: kprintpreview.cpp:300
 msgid ""
-"Preview failed: neither the internal KDE PostScript viewer (KGhostView) nor any "
+"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor any "
 "other external PostScript viewer could be found."
 msgstr ""
-"Keen Vöransicht mööglich: De interne PostScript-Kieker vun KDE (KGhostView) "
+"Keen Vöransicht mööglich: De interne PostScript-Kieker vun TDE (KGhostView) "
 "lett sik nich finnen, un en externe lett sik ok nich finnen."
 
 #: kprintpreview.cpp:304
 #, c-format
 msgid ""
-"Preview failed: KDE could not find any application to preview files of type %1."
+"Preview failed: TDE could not find any application to preview files of type %1."
 msgstr ""
-"Keen Vöransicht mööglich: KDE hett keen Kieker funnen för Dateien vun den Typ "
+"Keen Vöransicht mööglich: TDE hett keen Kieker funnen för Dateien vun den Typ "
 "\"%1\"."
 
 #: kprintpreview.cpp:314
@@ -6269,7 +6269,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-top=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     
      "
@@ -6304,7 +6304,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-bottom=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -6339,7 +6339,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-left=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -6374,7 +6374,7 @@ msgid ""
 "PDF file, which in most cases have their margins hardcoded  internally.
      "
 "
      "
 "
      "
-"
    Additional hint for power users: This KDEPrint GUI element "
+"
    Additional hint for power users: This TDEPrint GUI element "
 "matches  with the CUPS commandline job option parameter:  "
 "
        -o page-right=...      # use values from \"0\" or higher. \"72\" is "
 "equal to 1 inch.  
     "
@@ -6421,7 +6421,7 @@ msgid ""
 "The margin setting does not work if you load such files directly into  "
 "kprinter, which have their print margins hardcoded internally, like as most  "
 "PDF or PostScript files. It works for all ASCII text files however. It also may "
-"not  work with non-KDE applications which fail to  fully utilize the KDEPrint "
+"not  work with non-TDE applications which fail to  fully utilize the TDEPrint "
 "framework, such as OpenOffice.org. 
      "
 msgstr ""
 " "
@@ -6436,7 +6436,7 @@ msgstr ""
 "Beacht bitte: De Rand-Instellen funkscheneert nich för Dateitypen, de de "
 "Ränners intern fastschrievt, as de mehrsten PDF- un PostScript-Dateien. För all "
 "ASCII-Texten funkscheneert se aver. Villicht funscheneert dat ok nich bi "
-"Programmen, de nich Deel vun KDE sünd un dat Rahmenwark vun KDEPrint nich heel "
+"Programmen, de nich Deel vun TDE sünd un dat Rahmenwark vun TDEPrint nich heel "
 "ünnerstütt, as t.B. OpenOffice.
    "
 
 #: marginwidget.cpp:138
@@ -6494,14 +6494,14 @@ msgstr "JCL"
 #: kmvirtualmanager.cpp:161
 msgid ""
 "You are about to set a pseudo-printer as your personal default. This "
-"setting is specific to KDE and will not be available outside KDE applications. "
+"setting is specific to TDE and will not be available outside TDE applications. "
 "Note that this will only make your personal default printer as undefined for "
-"non-KDE applications and should not prevent you from printing normally. Do you "
+"non-TDE applications and should not prevent you from printing normally. Do you "
 "really want to set %1 as your personal default?"
 msgstr ""
 "Du wullt en Besünnern Drucker as Dien persöönlichen Standard fastleggen. "
-"Disse Instellen gellt bloots för KDE, se warrt nich vun Programmen anwendt, de "
-"nich Deel vun KDE sünd. Disse Programmen weet denn eenfach nix vun Dien "
+"Disse Instellen gellt bloots för TDE, se warrt nich vun Programmen anwendt, de "
+"nich Deel vun TDE sünd. Disse Programmen weet denn eenfach nix vun Dien "
 "persöönlichen Standard, man Du kannst liekers normaal drucken. Wullt Du \"%1\" "
 "redig as Dien persöönlichen Standard fastleggen?"
 
@@ -6518,7 +6518,7 @@ msgid ""
 "here, the 'Poster Printing' filter will be auto-loaded in  the "
 "'Filters' tab of this dialog. 
     "
 "
    This tab is only visible if the external 'poster' "
-"utility is  discovered by KDEPrint on your system. ['poster' "
+"utility is  discovered by TDEPrint on your system. ['poster' "
 "is a commandline  utility that enables you to convert PostScript files into "
 "tiled printouts  which allow for oversized appearance of the stitched-together "
 "tiles.] 
     "
@@ -6526,7 +6526,7 @@ msgid ""
 "must use a patched version of 'poster'. Ask your operating system vendor to  "
 "provide a patched version of 'poster' if he does not already. 
     "
 "
    Additional hint for power users: A patched version of 'poster' is  "
-"available from the KDEPrint Website  "
+"available from the TDEPrint Website  "
 "at http://printing.kde.org/downloads/.  The direct link to the patched source tarball is  \"Posterdruck\" automaatsch binnen de "
 "Dialoogsiet \"Filtern\" vun dissen Dialoog opduken.
    "
-"
    Disse Dialoogsiet warrt bloots wiest, wenn KDEPrint dat Hülpprogramm "
+"
    Disse Dialoogsiet warrt bloots wiest, wenn TDEPrint dat Hülpprogramm "
 "\"poster\" findt (Dat is en Befehlsreegprogramm, dat PostScript-Dateien op "
 "Kacheln verdeelt, so dat de tosamensett Kacheln en övergroot Bild formt).
    "
 "
    Beacht bitte: De Standardverschoon vun \"poster\" funkscheneert nich, "
 "Du muttst en flickte Verschoon bruken. Fraag bi de Makers vun Dien "
 "Bedriefsysteem na de flickte Verschoon.
    "
 "
    Noch en Henwies för Fachlüüd: En flickte Verschoon vun \"poster\" "
-"kann vun de KDEPrint-Nettsiet "
+"kann vun de TDEPrint-Nettsiet "
 "ünner "
 "http://printing.kde.org/downloads/ daallaadt warrn. De direkte Link na de "
 "flickte, komprimeerte tar-Datei is  Add Filter button "
 "
    This button calls a little dialog to let you select a filter here. 
     "
 "
    Note 1: You can chain different filters as long as you make  sure "
-"that the output of one fits as input of the next. (KDEPrint  checks your "
+"that the output of one fits as input of the next. (TDEPrint  checks your "
 "filtering chain and will warn you if you fail to do so.
      "
 "
    Note 2: The filters you define here are applied to your jobfile  "
 "before it is handed downstream to your spooler and print  subsystem "
@@ -6790,7 +6790,7 @@ msgstr ""
 "kannst.
    "
 "
    Henwies 1:
     Du kannst Daten achterenanner dör en Reeg Filtern "
 "schicken, wenn Du sekerstellst, dat de Utgaav vun den een as Ingaav för den "
-"nakamen passt (KDEPrint pröövt Dien Filterkeed un wohrschoot Di, wenn dor wat "
+"nakamen passt (TDEPrint pröövt Dien Filterkeed un wohrschoot Di, wenn dor wat "
 "nich passt).
    "
 "
    Henwies 2:
     De Filtern, de Du hier angiffst, warrt op de Daten "
 "anwendt, ehr se na Dien Drucksysteem (t.B. CUPS, LPRng, LPD) "
@@ -6840,7 +6840,7 @@ msgid ""
 "
    This field shows some general info about the selected filter.  Amongst them "
 "are:  "
 "
        "
-"
    • the filter name (as displayed in the KDEPrint user interface); "
+"
    • the filter name (as displayed in the TDEPrint user interface); "
 "
      •   "
 "
    • the filter requirements (that is the external program that needs  "
 "to present and executable on this system); 
      •   "
@@ -6855,7 +6855,7 @@ msgstr ""
 "
      Dit Feld wiest en Reeg allgemeen Informatschonen över den markeerten Filter. "
 "Dor sünd bi:"
 "
        "
-"
      • de Filternaam (de binnen KDEPrint wiest warrt),
        • "
+"
      • de Filternaam (de binnen TDEPrint wiest warrt),
        • "
 "
      • de Filter-Vörutsetten (en extern Programm, dat vörhannen un "
 "utföhrbor wesen mutt)
        • "
 "
      • de Filter-Ingaavformaat (een oder mehr MIME-Typen, mit de de "
@@ -6868,7 +6868,7 @@ msgid ""
 "  Filtering Chain (if enabled, is run before "
 "actual  job submission to print system) "
 "
        This field shows which filters are currently selected to act as "
-"'pre-filters'  for KDEPrint. Pre-filters are processing the print files "
+"'pre-filters'  for TDEPrint. Pre-filters are processing the print files "
 "before they are  send downstream to your real print subsystem. 
          "
 "
        The list shown in this field may be empty (default). 
          "
 "
        The pre-filters act on the printjob in the order they are listed (from top "
@@ -6878,13 +6878,13 @@ msgid ""
 "example: if your file is ASCII text, and you want the  output being processed "
 "by the 'Multipage per Sheet' filter, the first filter must be  one that "
 "processes ASCII into PostScript. 
          "
-"
        KDEPrint can utilize any external filtering program which you may "
+"
        TDEPrint can utilize any external filtering program which you may "
 "find useful  through this interface. 
          "
-"
        KDEPrint ships preconfigured with support for a selection of common filters. "
-"These  filters however need to be  installed independently from KDEPrint. These "
-"pre-filters work for all print subsystems supported by KDEPrint (such "
+"
        TDEPrint ships preconfigured with support for a selection of common filters. "
+"These  filters however need to be  installed independently from TDEPrint. These "
+"pre-filters work for all print subsystems supported by TDEPrint (such "
 "as CUPS, LPRng and LPD), because they are not depending on these.
         ."
-"
         Amongst the pre-configured filters shipping with KDEPrint are: 
          "
+"
         Amongst the pre-configured filters shipping with TDEPrint are: 
          "
 "
            "
 "
        • the Enscript text filter  
          •   "
 "
        • a Multiple Pages per Sheet filter  "
@@ -6895,12 +6895,12 @@ msgid ""
 "click on the funnel icon (topmost on  the right icon column group) and "
 "proceed. 
           "
 "
          Please click on the other elements of this dialog to learn more about the "
-"KDEPrint  pre-filters.  
           "
+"TDEPrint  pre-filters.  
           "
 msgstr ""
 " Filterkeed (wenn aktiveert, warrt Daten dor dörschickt, ehr "
 "se na dat Drucksysteem sendt warrt)"
 "
          Dat Feld wiest de opstunns utsöchten Filtern. Se warrt as \"Vör-Filtern\" "
-"vun KDEPrint anwendt, d.h. de Daten warrt dor dörschickt, ehr "
+"vun TDEPrint anwendt, d.h. de Daten warrt dor dörschickt, ehr "
 "se redig na dat Drucksysteem sendt warrt.
          "
 "
          De List dörv leddig wesen (Standard).
          "
 "
          De Filtern warrt in de Reeg, in de se oplist sünd (vun baven na nerrn), op "
@@ -6910,10 +6910,10 @@ msgstr ""
 "funkscheneren. As Bispeel: Du hest en ASCII-Text, un Du wullt em över den "
 "Filter \"Mehr Sieden per Blatt\" utgeven. Do twischen mutt denn en Filter "
 "wesen, de den ASCII-Text in PostScript ümwannelt.
          "
-"
          KDEPrint kann hier jichtenseen extern Programm as Filter bruken.
          "
-"
          KDEPrint warrt mit en Reeg faken bruukte Filtern utlevert, man se mööt för "
+"
          TDEPrint kann hier jichtenseen extern Programm as Filter bruken.
          "
+"
          TDEPrint warrt mit en Reeg faken bruukte Filtern utlevert, man se mööt för "
 "sik sülven installeert warrn. Disse Vörfiltern funkscheneert för all "
-"vun KDEPrint ünnerstütt Drucksystemen (as t.B. CUPS, LPRng usw.), wiel se nich "
+"vun TDEPrint ünnerstütt Drucksystemen (as t.B. CUPS, LPRng usw.), wiel se nich "
 "vun disse afhangt.
          "
 "
          Bi de mit utleverten Filtern sünd:
          "
 "
            "
@@ -6925,7 +6925,7 @@ msgstr ""
 "
          • un en poor mehr...
           Wenn Du hier en Filter tofögen wullt, klick "
 "eenfach op den Trechter (böverste Lüttbild rechterhand).
          "
 "
          Klick op de annern Dialoog-Elementen, wenn Du mehr över de Vörfiltern vun "
-"KDE weten wullt.
          "
+"TDE weten wullt.
          "
 
 #: kpfilterpage.cpp:125
 msgid "Filters"
@@ -6974,7 +6974,7 @@ msgid ""
 "
            "
 "
          • Color and
            •   "
 "
          • Grayscale
            Note: This selection field may be grayed "
-"out and made inactive.  This happens if KDEPrint can not retrieve  enough "
+"out and made inactive.  This happens if TDEPrint can not retrieve  enough "
 "information about your print file. In this case the embedded color- or "
 "grayscale information  of your printfile, and the default handling of the "
 "printer take precedence.  "
@@ -6983,7 +6983,7 @@ msgstr ""
 "
            "
 "
          • Klöör un 
            • "
 "
          • Griestöön
            Beacht bitte: "
-"Wenn disse Utwahl utmaakt is, kunn KDEPrint nich noog Informatschonen över Dien "
+"Wenn disse Utwahl utmaakt is, kunn TDEPrint nich noog Informatschonen över Dien "
 "Druckdatei finnen. Wenn dat de Fall is, warrt de inbett Klöörinformatschonen "
 "vun de Druckdatei un de Standardinstellen vun den Drucker bruukt."
 
-- 
cgit v1.2.1